diff options
Diffstat (limited to 'arch/arm')
305 files changed, 2707 insertions, 2804 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 09ebf0ba64fa..3146ed3f6eca 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -195,8 +195,7 @@ config VECTORS_BASE The base address of exception vectors. config ARM_PATCH_PHYS_VIRT - bool "Patch physical to virtual translations at runtime (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "Patch physical to virtual translations at runtime" depends on !XIP_KERNEL && MMU depends on !ARCH_REALVIEW || !SPARSEMEM help @@ -1272,6 +1271,32 @@ config ARM_ERRATA_754327 This workaround defines cpu_relax() as smp_mb(), preventing correctly written polling loops from denying visibility of updates to memory. +config ARM_ERRATA_364296 + bool "ARM errata: Possible cache data corruption with hit-under-miss enabled" + depends on CPU_V6 && !SMP + help + This options enables the workaround for the 364296 ARM1136 + r0p2 erratum (possible cache data corruption with + hit-under-miss enabled). It sets the undocumented bit 31 in + the auxiliary control register and the FI bit in the control + register, thus disabling hit-under-miss without putting the + processor into full low interrupt latency mode. ARM11MPCore + is not affected. + +config ARM_ERRATA_764369 + bool "ARM errata: Data cache line maintenance operation by MVA may not succeed" + depends on CPU_V7 && SMP + help + This option enables the workaround for erratum 764369 + affecting Cortex-A9 MPCore with two or more processors (all + current revisions). Under certain timing circumstances, a data + cache line maintenance operation by MVA targeting an Inner + Shareable memory region may fail to proceed up to either the + Point of Coherency or to the Point of Unification of the + system. This workaround adds a DSB instruction before the + relevant cache maintenance functions and sets a specific bit + in the diagnostic control register of the SCU. + endmenu source "arch/arm/common/Kconfig" @@ -1716,6 +1741,7 @@ config USE_OF bool "Flattened Device Tree support" select OF select OF_EARLY_FLATTREE + select IRQ_DOMAIN help Include support for flattened device tree machine descriptions. diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 3a4a04b33d0f..70c424eaf7b0 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -282,6 +282,12 @@ zImage Image xipImage bootpImage uImage: vmlinux zinstall uinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ +%.dtb: + $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ + +dtbs: + $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ + # We use MRPROPER_FILES and CLEAN_FILES now archclean: $(Q)$(MAKE) $(clean)=$(boot) @@ -298,6 +304,7 @@ define archhelp echo ' uImage - U-Boot wrapped zImage' echo ' bootpImage - Combined zImage and initial RAM disk' echo ' (supply initrd image via make variable INITRD=<path>)' + echo ' dtbs - Build device tree blobs for enabled boards' echo ' install - Install uncompressed kernel' echo ' zinstall - Install compressed kernel' echo ' uinstall - Install U-Boot wrapped compressed kernel' diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 9128fddf1109..a1edfd5a129a 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -59,6 +59,12 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE endif +# Rule to build device tree blobs +$(obj)/%.dtb: $(src)/dts/%.dts + $(call cmd,dtc) + +$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) + quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ -C none -a $(LOADADDR) -e $(STARTADDR) \ diff --git a/arch/arm/boot/compressed/mmcif-sh7372.c b/arch/arm/boot/compressed/mmcif-sh7372.c index b6f61d9a5a1b..672ae95db5c3 100644 --- a/arch/arm/boot/compressed/mmcif-sh7372.c +++ b/arch/arm/boot/compressed/mmcif-sh7372.c @@ -82,7 +82,7 @@ asmlinkage void mmc_loader(unsigned char *buf, unsigned long len) /* Disable clock to MMC hardware block */ - __raw_writel(__raw_readl(SMSTPCR3) & (1 << 12), SMSTPCR3); + __raw_writel(__raw_readl(SMSTPCR3) | (1 << 12), SMSTPCR3); mmc_update_progress(MMC_PROGRESS_DONE); } diff --git a/arch/arm/boot/compressed/sdhi-sh7372.c b/arch/arm/boot/compressed/sdhi-sh7372.c index d403a8b24d7f..d279294f2381 100644 --- a/arch/arm/boot/compressed/sdhi-sh7372.c +++ b/arch/arm/boot/compressed/sdhi-sh7372.c @@ -85,7 +85,7 @@ asmlinkage void mmc_loader(unsigned short *buf, unsigned long len) goto err; /* Disable clock to SDHI1 hardware block */ - __raw_writel(__raw_readl(SMSTPCR3) & (1 << 13), SMSTPCR3); + __raw_writel(__raw_readl(SMSTPCR3) | (1 << 13), SMSTPCR3); mmc_update_progress(MMC_PROGRESS_DONE); diff --git a/arch/arm/boot/dts/skeleton.dtsi b/arch/arm/boot/dts/skeleton.dtsi new file mode 100644 index 000000000000..b41d241de2cd --- /dev/null +++ b/arch/arm/boot/dts/skeleton.dtsi @@ -0,0 +1,13 @@ +/* + * Skeleton device tree; the bare minimum needed to boot; just include and + * add a compatible value. The bootloader will typically populate the memory + * node. + */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + chosen { }; + aliases { }; + memory { device_type = "memory"; reg = <0 0>; }; +}; diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts new file mode 100644 index 000000000000..e5818668d091 --- /dev/null +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -0,0 +1,70 @@ +/dts-v1/; + +/memreserve/ 0x1c000000 0x04000000; +/include/ "tegra20.dtsi" + +/ { + model = "NVIDIA Tegra2 Harmony evaluation board"; + compatible = "nvidia,harmony", "nvidia,tegra20"; + + chosen { + bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootwait"; + }; + + memory@0 { + reg = < 0x00000000 0x40000000 >; + }; + + i2c@7000c000 { + clock-frequency = <400000>; + + codec: wm8903@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + interrupts = < 347 >; + + gpio-controller; + #gpio-cells = <2>; + + /* 0x8000 = Not configured */ + gpio-cfg = < 0x8000 0x8000 0 0x8000 0x8000 >; + }; + }; + + i2c@7000c400 { + clock-frequency = <400000>; + }; + + i2c@7000c500 { + clock-frequency = <400000>; + }; + + i2c@7000d000 { + clock-frequency = <400000>; + }; + + sound { + compatible = "nvidia,harmony-sound", "nvidia,tegra-wm8903"; + + spkr-en-gpios = <&codec 2 0>; + hp-det-gpios = <&gpio 178 0>; + int-mic-en-gpios = <&gpio 184 0>; + ext-mic-en-gpios = <&gpio 185 0>; + }; + + serial@70006300 { + clock-frequency = < 216000000 >; + }; + + sdhci@c8000200 { + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 155 0>; /* gpio PT3 */ + }; + + sdhci@c8000600 { + cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ + }; +}; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts new file mode 100644 index 000000000000..64cedca6fc79 --- /dev/null +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -0,0 +1,28 @@ +/dts-v1/; + +/memreserve/ 0x1c000000 0x04000000; +/include/ "tegra20.dtsi" + +/ { + model = "NVIDIA Seaboard"; + compatible = "nvidia,seaboard", "nvidia,tegra20"; + + chosen { + bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk1p3 rw rootwait"; + }; + + memory { + device_type = "memory"; + reg = < 0x00000000 0x40000000 >; + }; + + serial@70006300 { + clock-frequency = < 216000000 >; + }; + + sdhci@c8000400 { + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ + }; +}; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi new file mode 100644 index 000000000000..5727595cde61 --- /dev/null +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -0,0 +1,139 @@ +/include/ "skeleton.dtsi" + +/ { + compatible = "nvidia,tegra20"; + interrupt-parent = <&intc>; + + intc: interrupt-controller@50041000 { + compatible = "nvidia,tegra20-gic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = < 0x50041000 0x1000 >, + < 0x50040100 0x0100 >; + }; + + i2c@7000c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nvidia,tegra20-i2c"; + reg = <0x7000C000 0x100>; + interrupts = < 70 >; + }; + + i2c@7000c400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nvidia,tegra20-i2c"; + reg = <0x7000C400 0x100>; + interrupts = < 116 >; + }; + + i2c@7000c500 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nvidia,tegra20-i2c"; + reg = <0x7000C500 0x100>; + interrupts = < 124 >; + }; + + i2c@7000d000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nvidia,tegra20-i2c"; + reg = <0x7000D000 0x200>; + interrupts = < 85 >; + }; + + i2s@70002800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nvidia,tegra20-i2s"; + reg = <0x70002800 0x200>; + interrupts = < 45 >; + dma-channel = < 2 >; + }; + + i2s@70002a00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nvidia,tegra20-i2s"; + reg = <0x70002a00 0x200>; + interrupts = < 35 >; + dma-channel = < 1 >; + }; + + das@70000c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nvidia,tegra20-das"; + reg = <0x70000c00 0x80>; + }; + + gpio: gpio@6000d000 { + compatible = "nvidia,tegra20-gpio"; + reg = < 0x6000d000 0x1000 >; + interrupts = < 64 65 66 67 87 119 121 >; + #gpio-cells = <2>; + gpio-controller; + }; + + serial@70006000 { + compatible = "nvidia,tegra20-uart"; + reg = <0x70006000 0x40>; + reg-shift = <2>; + interrupts = < 68 >; + }; + + serial@70006040 { + compatible = "nvidia,tegra20-uart"; + reg = <0x70006040 0x40>; + reg-shift = <2>; + interrupts = < 69 >; + }; + + serial@70006200 { + compatible = "nvidia,tegra20-uart"; + reg = <0x70006200 0x100>; + reg-shift = <2>; + interrupts = < 78 >; + }; + + serial@70006300 { + compatible = "nvidia,tegra20-uart"; + reg = <0x70006300 0x100>; + reg-shift = <2>; + interrupts = < 122 >; + }; + + serial@70006400 { + compatible = "nvidia,tegra20-uart"; + reg = <0x70006400 0x100>; + reg-shift = <2>; + interrupts = < 123 >; + }; + + sdhci@c8000000 { + compatible = "nvidia,tegra20-sdhci"; + reg = <0xc8000000 0x200>; + interrupts = < 46 >; + }; + + sdhci@c8000200 { + compatible = "nvidia,tegra20-sdhci"; + reg = <0xc8000200 0x200>; + interrupts = < 47 >; + }; + + sdhci@c8000400 { + compatible = "nvidia,tegra20-sdhci"; + reg = <0xc8000400 0x200>; + interrupts = < 51 >; + }; + + sdhci@c8000600 { + compatible = "nvidia,tegra20-sdhci"; + reg = <0xc8000600 0x200>; + interrupts = < 63 >; + }; +}; + diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts new file mode 100644 index 000000000000..0b32925f2147 --- /dev/null +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -0,0 +1,192 @@ +/dts-v1/; +/include/ "skeleton.dtsi" + +/ { + model = "ARM Versatile AB"; + compatible = "arm,versatile-ab"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&vic>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + i2c0 = &i2c0; + }; + + memory { + reg = <0x0 0x08000000>; + }; + + flash@34000000 { + compatible = "arm,versatile-flash"; + reg = <0x34000000 0x4000000>; + bank-width = <4>; + }; + + i2c0: i2c@10002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "arm,versatile-i2c"; + reg = <0x10002000 0x1000>; + + rtc@68 { + compatible = "dallas,ds1338"; + reg = <0x68>; + }; + }; + + net@10010000 { + compatible = "smsc,lan91c111"; + reg = <0x10010000 0x10000>; + interrupts = <25>; + }; + + lcd@10008000 { + compatible = "arm,versatile-lcd"; + reg = <0x10008000 0x1000>; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vic: intc@10140000 { + compatible = "arm,versatile-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x10140000 0x1000>; + }; + + sic: intc@10003000 { + compatible = "arm,versatile-sic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x10003000 0x1000>; + interrupt-parent = <&vic>; + interrupts = <31>; /* Cascaded to vic */ + }; + + dma@10130000 { + compatible = "arm,pl081", "arm,primecell"; + reg = <0x10130000 0x1000>; + interrupts = <17>; + }; + + uart0: uart@101f1000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x101f1000 0x1000>; + interrupts = <12>; + }; + + uart1: uart@101f2000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x101f2000 0x1000>; + interrupts = <13>; + }; + + uart2: uart@101f3000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x101f3000 0x1000>; + interrupts = <14>; + }; + + smc@10100000 { + compatible = "arm,primecell"; + reg = <0x10100000 0x1000>; + }; + + mpmc@10110000 { + compatible = "arm,primecell"; + reg = <0x10110000 0x1000>; + }; + + display@10120000 { + compatible = "arm,pl110", "arm,primecell"; + reg = <0x10120000 0x1000>; + interrupts = <16>; + }; + + sctl@101e0000 { + compatible = "arm,primecell"; + reg = <0x101e0000 0x1000>; + }; + + watchdog@101e1000 { + compatible = "arm,primecell"; + reg = <0x101e1000 0x1000>; + interrupts = <0>; + }; + + gpio0: gpio@101e4000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x101e4000 0x1000>; + gpio-controller; + interrupts = <6>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@101e5000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x101e5000 0x1000>; + interrupts = <7>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + rtc@101e8000 { + compatible = "arm,pl030", "arm,primecell"; + reg = <0x101e8000 0x1000>; + interrupts = <10>; + }; + + sci@101f0000 { + compatible = "arm,primecell"; + reg = <0x101f0000 0x1000>; + interrupts = <15>; + }; + + ssp@101f4000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x101f4000 0x1000>; + interrupts = <11>; + }; + + fpga { + compatible = "arm,versatile-fpga", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x10000000 0x10000>; + + aaci@4000 { + compatible = "arm,primecell"; + reg = <0x4000 0x1000>; + interrupts = <24>; + }; + mmc@5000 { + compatible = "arm,primecell"; + reg = < 0x5000 0x1000>; + interrupts = <22>; + }; + kmi@6000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x6000 0x1000>; + interrupt-parent = <&sic>; + interrupts = <3>; + }; + kmi@7000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x7000 0x1000>; + interrupt-parent = <&sic>; + interrupts = <4>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts new file mode 100644 index 000000000000..8a614e398004 --- /dev/null +++ b/arch/arm/boot/dts/versatile-pb.dts @@ -0,0 +1,48 @@ +/include/ "versatile-ab.dts" + +/ { + model = "ARM Versatile PB"; + compatible = "arm,versatile-pb"; + + amba { + gpio2: gpio@101e6000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x101e6000 0x1000>; + interrupts = <8>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@101e7000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x101e7000 0x1000>; + interrupts = <9>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + fpga { + uart@9000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x9000 0x1000>; + interrupt-parent = <&sic>; + interrupts = <6>; + }; + sci@a000 { + compatible = "arm,primecell"; + reg = <0xa000 0x1000>; + interrupt-parent = <&sic>; + interrupts = <5>; + }; + mmc@b000 { + compatible = "arm,primecell"; + reg = <0xb000 0x1000>; + interrupts = <23>; + }; + }; + }; +}; diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index 14ad62e16dd1..a7934ba9e1df 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -144,7 +144,7 @@ void it8152_irq_demux(unsigned int irq, struct irq_desc *desc) } /* mapping for on-chip devices */ -int __init it8152_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init it8152_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if ((dev->vendor == PCI_VENDOR_ID_ITE) && (dev->device == PCI_DEVICE_ID_ITE_8152)) { diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 8c73900da9ed..253cc86318bf 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -25,17 +25,17 @@ #ifdef CONFIG_SMP -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ +#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ smp_mb(); \ __asm__ __volatile__( \ - "1: ldrex %1, [%2]\n" \ + "1: ldrex %1, [%3]\n" \ " " insn "\n" \ - "2: strex %1, %0, [%2]\n" \ - " teq %1, #0\n" \ + "2: strex %2, %0, [%3]\n" \ + " teq %2, #0\n" \ " bne 1b\n" \ " mov %0, #0\n" \ - __futex_atomic_ex_table("%4") \ - : "=&r" (ret), "=&r" (oldval) \ + __futex_atomic_ex_table("%5") \ + : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") @@ -73,14 +73,14 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, #include <linux/preempt.h> #include <asm/domain.h> -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ +#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ __asm__ __volatile__( \ - "1: " T(ldr) " %1, [%2]\n" \ + "1: " T(ldr) " %1, [%3]\n" \ " " insn "\n" \ - "2: " T(str) " %0, [%2]\n" \ + "2: " T(str) " %0, [%3]\n" \ " mov %0, #0\n" \ - __futex_atomic_ex_table("%4") \ - : "=&r" (ret), "=&r" (oldval) \ + __futex_atomic_ex_table("%5") \ + : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") @@ -117,7 +117,7 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) int cmp = (encoded_op >> 24) & 15; int oparg = (encoded_op << 8) >> 20; int cmparg = (encoded_op << 20) >> 20; - int oldval = 0, ret; + int oldval = 0, ret, tmp; if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) oparg = 1 << oparg; @@ -129,19 +129,19 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) switch (op) { case FUTEX_OP_SET: - __futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("mov %0, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_ADD: - __futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("add %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_OR: - __futex_atomic_op("orr %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("orr %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_ANDN: - __futex_atomic_op("and %0, %1, %3", ret, oldval, uaddr, ~oparg); + __futex_atomic_op("and %0, %1, %4", ret, oldval, tmp, uaddr, ~oparg); break; case FUTEX_OP_XOR: - __futex_atomic_op("eor %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("eor %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; default: ret = -ENOSYS; diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 16bd48031583..99a6ed7e1bfd 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -45,8 +45,13 @@ #define L2X0_CLEAN_INV_LINE_PA 0x7F0 #define L2X0_CLEAN_INV_LINE_IDX 0x7F8 #define L2X0_CLEAN_INV_WAY 0x7FC -#define L2X0_LOCKDOWN_WAY_D 0x900 -#define L2X0_LOCKDOWN_WAY_I 0x904 +/* + * The lockdown registers repeat 8 times for L310, the L210 has only one + * D and one I lockdown register at 0x0900 and 0x0904. + */ +#define L2X0_LOCKDOWN_WAY_D_BASE 0x900 +#define L2X0_LOCKDOWN_WAY_I_BASE 0x904 +#define L2X0_LOCKDOWN_STRIDE 0x08 #define L2X0_TEST_OPERATION 0xF00 #define L2X0_LINE_DATA 0xF10 #define L2X0_LINE_TAG 0xF30 @@ -64,7 +69,7 @@ #define L2X0_AUX_CTRL_MASK 0xc0000fff #define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT 16 #define L2X0_AUX_CTRL_WAY_SIZE_SHIFT 17 -#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x3 << 17) +#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x7 << 17) #define L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT 22 #define L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT 26 #define L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT 27 diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h index b2f95c72287c..b3fea38d55c6 100644 --- a/arch/arm/include/asm/hardware/it8152.h +++ b/arch/arm/include/asm/hardware/it8152.h @@ -105,7 +105,7 @@ struct pci_sys_data; extern void it8152_irq_demux(unsigned int irq, struct irq_desc *desc); extern void it8152_init_irq(void); -extern int it8152_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin); +extern int it8152_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); extern int it8152_pci_setup(int nr, struct pci_sys_data *sys); extern struct pci_bus *it8152_pci_scan_bus(int nr, struct pci_sys_data *sys); diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 3281fb4b12e3..217aa1911dd7 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -74,4 +74,11 @@ static const struct machine_desc __mach_desc_##_type \ #define MACHINE_END \ }; +#define DT_MACHINE_START(_name, _namestr) \ +static const struct machine_desc __mach_desc_##_name \ + __used \ + __attribute__((__section__(".arch.info.init"))) = { \ + .nr = ~0, \ + .name = _namestr, + #endif diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h index 16330bd0657c..186efd4e05c9 100644 --- a/arch/arm/include/asm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -25,7 +25,7 @@ struct hw_pci { void (*preinit)(void); void (*postinit)(void); u8 (*swizzle)(struct pci_dev *dev, u8 *pin); - int (*map_irq)(struct pci_dev *dev, u8 slot, u8 pin); + int (*map_irq)(const struct pci_dev *dev, u8 slot, u8 pin); }; /* @@ -44,7 +44,7 @@ struct pci_sys_data { /* Bridge swizzling */ u8 (*swizzle)(struct pci_dev *, u8 *); /* IRQ mapping */ - int (*map_irq)(struct pci_dev *, u8, u8); + int (*map_irq)(const struct pci_dev *, u8, u8); struct hw_pci *hw; void *private_data; /* platform controller private data */ }; diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index 67c70a31a1be..b7e82c4aced6 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -41,7 +41,7 @@ struct arm_pmu_platdata { * encoded error on failure. */ extern struct platform_device * -reserve_pmu(enum arm_pmu_type device); +reserve_pmu(enum arm_pmu_type type); /** * release_pmu() - Relinquish control of the performance counters @@ -62,26 +62,26 @@ release_pmu(enum arm_pmu_type type); * the actual hardware initialisation. */ extern int -init_pmu(enum arm_pmu_type device); +init_pmu(enum arm_pmu_type type); #else /* CONFIG_CPU_HAS_PMU */ #include <linux/err.h> static inline struct platform_device * -reserve_pmu(enum arm_pmu_type device) +reserve_pmu(enum arm_pmu_type type) { return ERR_PTR(-ENODEV); } static inline int -release_pmu(struct platform_device *pdev) +release_pmu(enum arm_pmu_type type) { return -ENODEV; } static inline int -init_pmu(enum arm_pmu_type device) +init_pmu(enum arm_pmu_type type) { return -ENODEV; } diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h index 11b8708fc4db..6f65ca86a5ec 100644 --- a/arch/arm/include/asm/prom.h +++ b/arch/arm/include/asm/prom.h @@ -16,11 +16,6 @@ #include <asm/setup.h> #include <asm/irq.h> -static inline void irq_dispose_mapping(unsigned int virq) -{ - return; -} - extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys); extern void arm_dt_memblock_reserve(void); diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 2c04ed5efeb5..c60a2944f95b 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -478,8 +478,8 @@ /* * Unimplemented (or alternatively implemented) syscalls */ -#define __IGNORE_fadvise64_64 1 -#define __IGNORE_migrate_pages 1 +#define __IGNORE_fadvise64_64 +#define __IGNORE_migrate_pages #endif /* __KERNEL__ */ #endif /* __ASM_ARM_UNISTD_H */ diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index acca35aebe28..aeef960ff795 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -112,9 +112,6 @@ EXPORT_SYMBOL(__put_user_4); EXPORT_SYMBOL(__put_user_8); #endif - /* crypto hash */ -EXPORT_SYMBOL(sha_transform); - /* gcc lib functions */ EXPORT_SYMBOL(__ashldi3); EXPORT_SYMBOL(__ashrdi3); diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index e4ee050aad7d..d6df359408f0 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -476,7 +476,7 @@ static u8 __devinit pcibios_swizzle(struct pci_dev *dev, u8 *pin) /* * Map a slot/pin to an IRQ. */ -static int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { struct pci_sys_data *sys = dev->sysdata; int irq = -1; diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 80f7896cc016..9943e9e74a1b 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -178,7 +178,7 @@ CALL(sys_ni_syscall) /* vm86 */ CALL(sys_ni_syscall) /* was sys_query_module */ CALL(sys_poll) - CALL(sys_nfsservctl) + CALL(sys_ni_syscall) /* was nfsservctl */ /* 170 */ CALL(sys_setresgid16) CALL(sys_getresgid16) CALL(sys_prctl) diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index 0cdd7b456cb2..1a33e9d6bb1f 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -132,17 +132,3 @@ struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) return mdesc_best; } - -/** - * irq_create_of_mapping - Hook to resolve OF irq specifier into a Linux irq# - * - * Currently the mapping mechanism is trivial; simple flat hwirq numbers are - * mapped 1:1 onto Linux irq numbers. Cascaded irq controllers are not - * supported. - */ -unsigned int irq_create_of_mapping(struct device_node *controller, - const u32 *intspec, unsigned int intsize) -{ - return intspec[0]; -} -EXPORT_SYMBOL_GPL(irq_create_of_mapping); diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S index 7fa3bb0d2397..a08783823b32 100644 --- a/arch/arm/kernel/iwmmxt.S +++ b/arch/arm/kernel/iwmmxt.S @@ -195,10 +195,10 @@ ENTRY(iwmmxt_task_disable) @ enable access to CP0 and CP1 XSC(mrc p15, 0, r4, c15, c1, 0) - XSC(orr r4, r4, #0xf) + XSC(orr r4, r4, #0x3) XSC(mcr p15, 0, r4, c15, c1, 0) PJ4(mrc p15, 0, r4, c1, c0, 2) - PJ4(orr r4, r4, #0x3) + PJ4(orr r4, r4, #0xf) PJ4(mcr p15, 0, r4, c1, c0, 2) mov r0, #0 @ nothing to load @@ -313,7 +313,7 @@ ENTRY(iwmmxt_task_switch) teq r2, r3 @ next task owns it? movne pc, lr @ no: leave Concan disabled -1: @ flip Conan access +1: @ flip Concan access XSC(eor r1, r1, #0x3) XSC(mcr p15, 0, r1, c15, c1, 0) PJ4(eor r1, r1, #0xf) diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 05b377616fd5..cc2020c2c709 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -323,7 +323,11 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, #endif s = find_mod_section(hdr, sechdrs, ".alt.smp.init"); if (s && !is_smp()) +#ifdef CONFIG_SMP_ON_UP fixup_smp((void *)s->sh_addr, s->sh_size); +#else + return -EINVAL; +#endif return 0; } diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c index 2b70709376c3..c53474fe84df 100644 --- a/arch/arm/kernel/pmu.c +++ b/arch/arm/kernel/pmu.c @@ -31,7 +31,7 @@ static int __devinit pmu_register(struct platform_device *pdev, { if (type < 0 || type >= ARM_NUM_PMU_DEVICES) { pr_warning("received registration request for unknown " - "device %d\n", type); + "PMU device type %d\n", type); return -EINVAL; } @@ -112,17 +112,17 @@ static int __init register_pmu_driver(void) device_initcall(register_pmu_driver); struct platform_device * -reserve_pmu(enum arm_pmu_type device) +reserve_pmu(enum arm_pmu_type type) { struct platform_device *pdev; - if (test_and_set_bit_lock(device, &pmu_lock)) { + if (test_and_set_bit_lock(type, &pmu_lock)) { pdev = ERR_PTR(-EBUSY); - } else if (pmu_devices[device] == NULL) { - clear_bit_unlock(device, &pmu_lock); + } else if (pmu_devices[type] == NULL) { + clear_bit_unlock(type, &pmu_lock); pdev = ERR_PTR(-ENODEV); } else { - pdev = pmu_devices[device]; + pdev = pmu_devices[type]; } return pdev; @@ -130,11 +130,11 @@ reserve_pmu(enum arm_pmu_type device) EXPORT_SYMBOL_GPL(reserve_pmu); int -release_pmu(enum arm_pmu_type device) +release_pmu(enum arm_pmu_type type) { - if (WARN_ON(!pmu_devices[device])) + if (WARN_ON(!pmu_devices[type])) return -EINVAL; - clear_bit_unlock(device, &pmu_lock); + clear_bit_unlock(type, &pmu_lock); return 0; } EXPORT_SYMBOL_GPL(release_pmu); @@ -182,17 +182,17 @@ init_cpu_pmu(void) } int -init_pmu(enum arm_pmu_type device) +init_pmu(enum arm_pmu_type type) { int err = 0; - switch (device) { + switch (type) { case ARM_PMU_DEVICE_CPU: err = init_cpu_pmu(); break; default: - pr_warning("attempt to initialise unknown device %d\n", - device); + pr_warning("attempt to initialise PMU of unknown " + "type %d\n", type); err = -EINVAL; } diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 5e1e54197227..1a347f481e5e 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -30,6 +30,7 @@ #include <linux/uaccess.h> #include <linux/random.h> #include <linux/hw_breakpoint.h> +#include <linux/cpuidle.h> #include <asm/cacheflush.h> #include <asm/leds.h> @@ -196,7 +197,8 @@ void cpu_idle(void) cpu_relax(); } else { stop_critical_timings(); - pm_idle(); + if (cpuidle_idle_call()) + pm_idle(); start_critical_timings(); /* * This will eventually be removed - pm_idle diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S index 9cf4cbf8f95b..d0cdedf4864d 100644 --- a/arch/arm/kernel/relocate_kernel.S +++ b/arch/arm/kernel/relocate_kernel.S @@ -57,7 +57,8 @@ relocate_new_kernel: mov r0,#0 ldr r1,kexec_mach_type ldr r2,kexec_boot_atags - mov pc,lr + ARM( mov pc, lr ) + THUMB( bx lr ) .align diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 70bca649e925..e514c76043b4 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -280,18 +280,19 @@ static void __init cacheid_init(void) if (arch >= CPU_ARCH_ARMv6) { if ((cachetype & (7 << 29)) == 4 << 29) { /* ARMv7 register format */ + arch = CPU_ARCH_ARMv7; cacheid = CACHEID_VIPT_NONALIASING; if ((cachetype & (3 << 14)) == 1 << 14) cacheid |= CACHEID_ASID_TAGGED; - else if (cpu_has_aliasing_icache(CPU_ARCH_ARMv7)) - cacheid |= CACHEID_VIPT_I_ALIASING; - } else if (cachetype & (1 << 23)) { - cacheid = CACHEID_VIPT_ALIASING; } else { - cacheid = CACHEID_VIPT_NONALIASING; - if (cpu_has_aliasing_icache(CPU_ARCH_ARMv6)) - cacheid |= CACHEID_VIPT_I_ALIASING; + arch = CPU_ARCH_ARMv6; + if (cachetype & (1 << 23)) + cacheid = CACHEID_VIPT_ALIASING; + else + cacheid = CACHEID_VIPT_NONALIASING; } + if (cpu_has_aliasing_icache(arch)) + cacheid |= CACHEID_VIPT_I_ALIASING; } else { cacheid = CACHEID_VIVT; } diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index 79ed5e7f204a..7fcddb75c877 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -13,6 +13,7 @@ #include <asm/smp_scu.h> #include <asm/cacheflush.h> +#include <asm/cputype.h> #define SCU_CTRL 0x00 #define SCU_CONFIG 0x04 @@ -37,6 +38,15 @@ void __init scu_enable(void __iomem *scu_base) { u32 scu_ctrl; +#ifdef CONFIG_ARM_ERRATA_764369 + /* Cortex-A9 only */ + if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) { + scu_ctrl = __raw_readl(scu_base + 0x30); + if (!(scu_ctrl & 1)) + __raw_writel(scu_ctrl | 0x1, scu_base + 0x30); + } +#endif + scu_ctrl = __raw_readl(scu_base + SCU_CTRL); /* already enabled? */ if (scu_ctrl & 1) diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 2c277d40cee6..01c186222f3b 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -137,8 +137,8 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk) clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk); clk->min_delta_ns = clockevent_delta2ns(0xf, clk); + clockevents_register_device(clk); + /* Make sure our local interrupt controller has this enabled */ gic_enable_ppi(clk->irq); - - clockevents_register_device(clk); } diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index bf977f8514f6..4e66f62b8d41 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -23,8 +23,10 @@ #if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK) #define ARM_EXIT_KEEP(x) x +#define ARM_EXIT_DISCARD(x) #else #define ARM_EXIT_KEEP(x) +#define ARM_EXIT_DISCARD(x) x #endif OUTPUT_ARCH(arm) @@ -39,6 +41,11 @@ jiffies = jiffies_64 + 4; SECTIONS { /* + * XXX: The linker does not define how output sections are + * assigned to input sections when there are multiple statements + * matching the same input section name. There is no documented + * order of matching. + * * unwind exit sections must be discarded before the rest of the * unwind sections get included. */ @@ -47,6 +54,9 @@ SECTIONS *(.ARM.extab.exit.text) ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text)) ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text)) + ARM_EXIT_DISCARD(EXIT_TEXT) + ARM_EXIT_DISCARD(EXIT_DATA) + EXIT_CALL #ifndef CONFIG_HOTPLUG *(.ARM.exidx.devexit.text) *(.ARM.extab.devexit.text) @@ -58,6 +68,8 @@ SECTIONS #ifndef CONFIG_SMP_ON_UP *(.alt.smp.init) #endif + *(.discard) + *(.discard.*) } #ifdef CONFIG_XIP_KERNEL @@ -279,9 +291,6 @@ SECTIONS STABS_DEBUG .comment 0 : { *(.comment) } - - /* Default discards */ - DISCARDS } /* diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 59ff42ddf0ae..cf73a7f742dd 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -12,7 +12,7 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ strchr.o strrchr.o \ testchangebit.o testclearbit.o testsetbit.o \ ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ - ucmpdi2.o lib1funcs.o div64.o sha1.o \ + ucmpdi2.o lib1funcs.o div64.o \ io-readsb.o io-writesb.o io-readsl.o io-writesl.o mmu-y := clear_user.o copy_page.o getuser.o putuser.o diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S deleted file mode 100644 index eb0edb80d7b8..000000000000 --- a/arch/arm/lib/sha1.S +++ /dev/null @@ -1,211 +0,0 @@ -/* - * linux/arch/arm/lib/sha1.S - * - * SHA transform optimized for ARM - * - * Copyright: (C) 2005 by Nicolas Pitre <nico@fluxnic.net> - * Created: September 17, 2005 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * The reference implementation for this code is linux/lib/sha1.c - */ - -#include <linux/linkage.h> - - .text - - -/* - * void sha_transform(__u32 *digest, const char *in, __u32 *W) - * - * Note: the "in" ptr may be unaligned. - */ - -ENTRY(sha_transform) - - stmfd sp!, {r4 - r8, lr} - - @ for (i = 0; i < 16; i++) - @ W[i] = be32_to_cpu(in[i]); - -#ifdef __ARMEB__ - mov r4, r0 - mov r0, r2 - mov r2, #64 - bl memcpy - mov r2, r0 - mov r0, r4 -#else - mov r3, r2 - mov lr, #16 -1: ldrb r4, [r1], #1 - ldrb r5, [r1], #1 - ldrb r6, [r1], #1 - ldrb r7, [r1], #1 - subs lr, lr, #1 - orr r5, r5, r4, lsl #8 - orr r6, r6, r5, lsl #8 - orr r7, r7, r6, lsl #8 - str r7, [r3], #4 - bne 1b -#endif - - @ for (i = 0; i < 64; i++) - @ W[i+16] = ror(W[i+13] ^ W[i+8] ^ W[i+2] ^ W[i], 31); - - sub r3, r2, #4 - mov lr, #64 -2: ldr r4, [r3, #4]! - subs lr, lr, #1 - ldr r5, [r3, #8] - ldr r6, [r3, #32] - ldr r7, [r3, #52] - eor r4, r4, r5 - eor r4, r4, r6 - eor r4, r4, r7 - mov r4, r4, ror #31 - str r4, [r3, #64] - bne 2b - - /* - * The SHA functions are: - * - * f1(B,C,D) = (D ^ (B & (C ^ D))) - * f2(B,C,D) = (B ^ C ^ D) - * f3(B,C,D) = ((B & C) | (D & (B | C))) - * - * Then the sub-blocks are processed as follows: - * - * A' = ror(A, 27) + f(B,C,D) + E + K + *W++ - * B' = A - * C' = ror(B, 2) - * D' = C - * E' = D - * - * We therefore unroll each loop 5 times to avoid register shuffling. - * Also the ror for C (and also D and E which are successivelyderived - * from it) is applied in place to cut on an additional mov insn for - * each round. - */ - - .macro sha_f1, A, B, C, D, E - ldr r3, [r2], #4 - eor ip, \C, \D - add \E, r1, \E, ror #2 - and ip, \B, ip, ror #2 - add \E, \E, \A, ror #27 - eor ip, ip, \D, ror #2 - add \E, \E, r3 - add \E, \E, ip - .endm - - .macro sha_f2, A, B, C, D, E - ldr r3, [r2], #4 - add \E, r1, \E, ror #2 - eor ip, \B, \C, ror #2 - add \E, \E, \A, ror #27 - eor ip, ip, \D, ror #2 - add \E, \E, r3 - add \E, \E, ip - .endm - - .macro sha_f3, A, B, C, D, E - ldr r3, [r2], #4 - add \E, r1, \E, ror #2 - orr ip, \B, \C, ror #2 - add \E, \E, \A, ror #27 - and ip, ip, \D, ror #2 - add \E, \E, r3 - and r3, \B, \C, ror #2 - orr ip, ip, r3 - add \E, \E, ip - .endm - - ldmia r0, {r4 - r8} - - mov lr, #4 - ldr r1, .L_sha_K + 0 - - /* adjust initial values */ - mov r6, r6, ror #30 - mov r7, r7, ror #30 - mov r8, r8, ror #30 - -3: subs lr, lr, #1 - sha_f1 r4, r5, r6, r7, r8 - sha_f1 r8, r4, r5, r6, r7 - sha_f1 r7, r8, r4, r5, r6 - sha_f1 r6, r7, r8, r4, r5 - sha_f1 r5, r6, r7, r8, r4 - bne 3b - - ldr r1, .L_sha_K + 4 - mov lr, #4 - -4: subs lr, lr, #1 - sha_f2 r4, r5, r6, r7, r8 - sha_f2 r8, r4, r5, r6, r7 - sha_f2 r7, r8, r4, r5, r6 - sha_f2 r6, r7, r8, r4, r5 - sha_f2 r5, r6, r7, r8, r4 - bne 4b - - ldr r1, .L_sha_K + 8 - mov lr, #4 - -5: subs lr, lr, #1 - sha_f3 r4, r5, r6, r7, r8 - sha_f3 r8, r4, r5, r6, r7 - sha_f3 r7, r8, r4, r5, r6 - sha_f3 r6, r7, r8, r4, r5 - sha_f3 r5, r6, r7, r8, r4 - bne 5b - - ldr r1, .L_sha_K + 12 - mov lr, #4 - -6: subs lr, lr, #1 - sha_f2 r4, r5, r6, r7, r8 - sha_f2 r8, r4, r5, r6, r7 - sha_f2 r7, r8, r4, r5, r6 - sha_f2 r6, r7, r8, r4, r5 - sha_f2 r5, r6, r7, r8, r4 - bne 6b - - ldmia r0, {r1, r2, r3, ip, lr} - add r4, r1, r4 - add r5, r2, r5 - add r6, r3, r6, ror #2 - add r7, ip, r7, ror #2 - add r8, lr, r8, ror #2 - stmia r0, {r4 - r8} - - ldmfd sp!, {r4 - r8, pc} - -ENDPROC(sha_transform) - - .align 2 -.L_sha_K: - .word 0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6 - - -/* - * void sha_init(__u32 *buf) - */ - - .align 2 -.L_sha_initial_digest: - .word 0x67452301, 0xefcdab89, 0x98badcfe, 0x10325476, 0xc3d2e1f0 - -ENTRY(sha_init) - - str lr, [sp, #-4]! - adr r1, .L_sha_initial_digest - ldmia r1, {r1, r2, r3, ip, lr} - stmia r0, {r1, r2, r3, ip, lr} - ldr pc, [sp], #4 - -ENDPROC(sha_init) diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 96966231920c..bf57e8b1c9d0 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := irq.o gpio.o +obj-y := irq.o gpio.o setup.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index f1013d08bb57..bfc684441ef8 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -25,23 +25,10 @@ #include <mach/at91_rstc.h> #include <mach/at91_shdwc.h> +#include "soc.h" #include "generic.h" #include "clock.h" -static struct map_desc at91cap9_io_desc[] __initdata = { - { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT91CAP9_SRAM_SIZE, - .pfn = __phys_to_pfn(AT91CAP9_SRAM_BASE), - .length = AT91CAP9_SRAM_SIZE, - .type = MT_DEVICE, - }, -}; - /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -339,24 +326,17 @@ static void at91cap9_poweroff(void) * AT91CAP9 processor initialization * -------------------------------------------------------------------- */ -void __init at91cap9_map_io(void) +static void __init at91cap9_map_io(void) { - /* Map peripherals */ - iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc)); + at91_init_sram(0, AT91CAP9_SRAM_BASE, AT91CAP9_SRAM_SIZE); } -void __init at91cap9_initialize(unsigned long main_clock) +static void __init at91cap9_initialize(void) { at91_arch_reset = at91cap9_reset; pm_power_off = at91cap9_poweroff; at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at91cap9_register_clocks(); - /* Register GPIO subsystem */ at91_gpio_init(at91cap9_gpio, 4); @@ -409,14 +389,9 @@ static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ1) */ }; -void __init at91cap9_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91cap9_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} +struct at91_init_soc __initdata at91cap9_soc = { + .map_io = at91cap9_map_io, + .default_irq_priority = at91cap9_default_irq_priority, + .register_clocks = at91cap9_register_clocks, + .init = at91cap9_initialize, +}; diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 83a1a3fee554..f73302dbc6a5 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -20,25 +20,16 @@ #include <mach/at91_st.h> #include <mach/cpu.h> +#include "soc.h" #include "generic.h" #include "clock.h" static struct map_desc at91rm9200_io_desc[] __initdata = { { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = AT91_VA_BASE_EMAC, .pfn = __phys_to_pfn(AT91RM9200_BASE_EMAC), .length = SZ_16K, .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE, - .pfn = __phys_to_pfn(AT91RM9200_SRAM_BASE), - .length = AT91RM9200_SRAM_SIZE, - .type = MT_DEVICE, }, }; @@ -304,24 +295,17 @@ static void at91rm9200_reset(void) at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); } -int rm9200_type; -EXPORT_SYMBOL(rm9200_type); - -void __init at91rm9200_set_type(int type) -{ - rm9200_type = type; -} - /* -------------------------------------------------------------------- * AT91RM9200 processor initialization * -------------------------------------------------------------------- */ -void __init at91rm9200_map_io(void) +static void __init at91rm9200_map_io(void) { /* Map peripherals */ + at91_init_sram(0, AT91RM9200_SRAM_BASE, AT91RM9200_SRAM_SIZE); iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc)); } -void __init at91rm9200_initialize(unsigned long main_clock) +static void __init at91rm9200_initialize(void) { at91_arch_reset = at91rm9200_reset; at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) @@ -329,12 +313,6 @@ void __init at91rm9200_initialize(unsigned long main_clock) | (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5) | (1 << AT91RM9200_ID_IRQ6); - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at91rm9200_register_clocks(); - /* Initialize GPIO subsystem */ at91_gpio_init(at91rm9200_gpio, cpu_is_at91rm9200_bga() ? AT91RM9200_BGA : AT91RM9200_PQFP); @@ -383,14 +361,9 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { 0 /* Advanced Interrupt Controller (IRQ6) */ }; -void __init at91rm9200_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91rm9200_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} +struct at91_init_soc __initdata at91rm9200_soc = { + .map_io = at91rm9200_map_io, + .default_irq_priority = at91rm9200_default_irq_priority, + .register_clocks = at91rm9200_register_clocks, + .init = at91rm9200_initialize, +}; diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 7d606b04d313..cb397be14448 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -17,58 +17,16 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <mach/cpu.h> +#include <mach/at91_dbgu.h> #include <mach/at91sam9260.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> #include <mach/at91_shdwc.h> +#include "soc.h" #include "generic.h" #include "clock.h" -static struct map_desc at91sam9260_io_desc[] __initdata = { - { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, - } -}; - -static struct map_desc at91sam9260_sram_desc[] __initdata = { - { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE, - .pfn = __phys_to_pfn(AT91SAM9260_SRAM0_BASE), - .length = AT91SAM9260_SRAM0_SIZE, - .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE - AT91SAM9260_SRAM1_SIZE, - .pfn = __phys_to_pfn(AT91SAM9260_SRAM1_BASE), - .length = AT91SAM9260_SRAM1_SIZE, - .type = MT_DEVICE, - } -}; - -static struct map_desc at91sam9g20_sram_desc[] __initdata = { - { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9G20_SRAM0_SIZE, - .pfn = __phys_to_pfn(AT91SAM9G20_SRAM0_BASE), - .length = AT91SAM9G20_SRAM0_SIZE, - .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9G20_SRAM0_SIZE - AT91SAM9G20_SRAM1_SIZE, - .pfn = __phys_to_pfn(AT91SAM9G20_SRAM1_BASE), - .length = AT91SAM9G20_SRAM1_SIZE, - .type = MT_DEVICE, - } -}; - -static struct map_desc at91sam9xe_sram_desc[] __initdata = { - { - .pfn = __phys_to_pfn(AT91SAM9XE_SRAM_BASE), - .type = MT_DEVICE, - } -}; - /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -330,11 +288,9 @@ static void at91sam9260_poweroff(void) static void __init at91sam9xe_map_io(void) { - unsigned long cidr, sram_size; - - cidr = at91_sys_read(AT91_DBGU_CIDR); + unsigned long sram_size; - switch (cidr & AT91_CIDR_SRAMSIZ) { + switch (at91_soc_initdata.cidr & AT91_CIDR_SRAMSIZ) { case AT91_CIDR_SRAMSIZ_32K: sram_size = 2 * SZ_16K; break; @@ -343,38 +299,29 @@ static void __init at91sam9xe_map_io(void) sram_size = SZ_16K; } - at91sam9xe_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size; - at91sam9xe_sram_desc->length = sram_size; - - iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc)); + at91_init_sram(0, AT91SAM9XE_SRAM_BASE, sram_size); } -void __init at91sam9260_map_io(void) +static void __init at91sam9260_map_io(void) { - /* Map peripherals */ - iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc)); - - if (cpu_is_at91sam9xe()) + if (cpu_is_at91sam9xe()) { at91sam9xe_map_io(); - else if (cpu_is_at91sam9g20()) - iotable_init(at91sam9g20_sram_desc, ARRAY_SIZE(at91sam9g20_sram_desc)); - else - iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc)); + } else if (cpu_is_at91sam9g20()) { + at91_init_sram(0, AT91SAM9G20_SRAM0_BASE, AT91SAM9G20_SRAM0_SIZE); + at91_init_sram(1, AT91SAM9G20_SRAM1_BASE, AT91SAM9G20_SRAM1_SIZE); + } else { + at91_init_sram(0, AT91SAM9260_SRAM0_BASE, AT91SAM9260_SRAM0_SIZE); + at91_init_sram(1, AT91SAM9260_SRAM1_BASE, AT91SAM9260_SRAM1_SIZE); + } } -void __init at91sam9260_initialize(unsigned long main_clock) +static void __init at91sam9260_initialize(void) { at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9260_poweroff; at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) | (1 << AT91SAM9260_ID_IRQ2); - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at91sam9260_register_clocks(); - /* Register GPIO subsystem */ at91_gpio_init(at91sam9260_gpio, 3); } @@ -421,14 +368,9 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -void __init at91sam9260_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91sam9260_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} +struct at91_init_soc __initdata at91sam9260_soc = { + .map_io = at91sam9260_map_io, + .default_irq_priority = at91sam9260_default_irq_priority, + .register_clocks = at91sam9260_register_clocks, + .init = at91sam9260_initialize, +}; diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index c1483168c97a..6c8e3b5f669f 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -22,36 +22,10 @@ #include <mach/at91_rstc.h> #include <mach/at91_shdwc.h> +#include "soc.h" #include "generic.h" #include "clock.h" -static struct map_desc at91sam9261_io_desc[] __initdata = { - { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc at91sam9261_sram_desc[] __initdata = { - { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE, - .pfn = __phys_to_pfn(AT91SAM9261_SRAM_BASE), - .length = AT91SAM9261_SRAM_SIZE, - .type = MT_DEVICE, - }, -}; - -static struct map_desc at91sam9g10_sram_desc[] __initdata = { - { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9G10_SRAM_SIZE, - .pfn = __phys_to_pfn(AT91SAM9G10_SRAM_BASE), - .length = AT91SAM9G10_SRAM_SIZE, - .type = MT_DEVICE, - }, -}; - /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -183,7 +157,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), - CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), @@ -302,30 +276,21 @@ static void at91sam9261_poweroff(void) * AT91SAM9261 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9261_map_io(void) +static void __init at91sam9261_map_io(void) { - /* Map peripherals */ - iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc)); - if (cpu_is_at91sam9g10()) - iotable_init(at91sam9g10_sram_desc, ARRAY_SIZE(at91sam9g10_sram_desc)); + at91_init_sram(0, AT91SAM9G10_SRAM_BASE, AT91SAM9G10_SRAM_SIZE); else - iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc)); + at91_init_sram(0, AT91SAM9261_SRAM_BASE, AT91SAM9261_SRAM_SIZE); } -void __init at91sam9261_initialize(unsigned long main_clock) +static void __init at91sam9261_initialize(void) { at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9261_poweroff; at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) | (1 << AT91SAM9261_ID_IRQ2); - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at91sam9261_register_clocks(); - /* Register GPIO subsystem */ at91_gpio_init(at91sam9261_gpio, 3); } @@ -372,14 +337,9 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -void __init at91sam9261_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91sam9261_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} +struct at91_init_soc __initdata at91sam9261_soc = { + .map_io = at91sam9261_map_io, + .default_irq_priority = at91sam9261_default_irq_priority, + .register_clocks = at91sam9261_register_clocks, + .init = at91sam9261_initialize, +}; diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index dc28477d14ff..044f3c927e64 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -21,28 +21,10 @@ #include <mach/at91_rstc.h> #include <mach/at91_shdwc.h> +#include "soc.h" #include "generic.h" #include "clock.h" -static struct map_desc at91sam9263_io_desc[] __initdata = { - { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE, - .pfn = __phys_to_pfn(AT91SAM9263_SRAM0_BASE), - .length = AT91SAM9263_SRAM0_SIZE, - .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE - AT91SAM9263_SRAM1_SIZE, - .pfn = __phys_to_pfn(AT91SAM9263_SRAM1_BASE), - .length = AT91SAM9263_SRAM1_SIZE, - .type = MT_DEVICE, - }, -}; - /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -313,24 +295,18 @@ static void at91sam9263_poweroff(void) * AT91SAM9263 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9263_map_io(void) +static void __init at91sam9263_map_io(void) { - /* Map peripherals */ - iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc)); + at91_init_sram(0, AT91SAM9263_SRAM0_BASE, AT91SAM9263_SRAM0_SIZE); + at91_init_sram(1, AT91SAM9263_SRAM1_BASE, AT91SAM9263_SRAM1_SIZE); } -void __init at91sam9263_initialize(unsigned long main_clock) +static void __init at91sam9263_initialize(void) { at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9263_poweroff; at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1); - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at91sam9263_register_clocks(); - /* Register GPIO subsystem */ at91_gpio_init(at91sam9263_gpio, 5); } @@ -377,14 +353,9 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ1) */ }; -void __init at91sam9263_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91sam9263_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} +struct at91_init_soc __initdata at91sam9263_soc = { + .map_io = at91sam9263_map_io, + .default_irq_priority = at91sam9263_default_irq_priority, + .register_clocks = at91sam9263_register_clocks, + .init = at91sam9263_initialize, +}; diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 11e214121b23..e04c5fb6f1ee 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -22,23 +22,10 @@ #include <mach/at91_shdwc.h> #include <mach/cpu.h> +#include "soc.h" #include "generic.h" #include "clock.h" -static struct map_desc at91sam9g45_io_desc[] __initdata = { - { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9G45_SRAM_SIZE, - .pfn = __phys_to_pfn(AT91SAM9G45_SRAM_BASE), - .length = AT91SAM9G45_SRAM_SIZE, - .type = MT_DEVICE, - } -}; - /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -329,24 +316,17 @@ static void at91sam9g45_poweroff(void) * AT91SAM9G45 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9g45_map_io(void) +static void __init at91sam9g45_map_io(void) { - /* Map peripherals */ - iotable_init(at91sam9g45_io_desc, ARRAY_SIZE(at91sam9g45_io_desc)); + at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE); } -void __init at91sam9g45_initialize(unsigned long main_clock) +static void __init at91sam9g45_initialize(void) { at91_arch_reset = at91sam9g45_reset; pm_power_off = at91sam9g45_poweroff; at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0); - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at91sam9g45_register_clocks(); - /* Register GPIO subsystem */ at91_gpio_init(at91sam9g45_gpio, 5); } @@ -393,14 +373,9 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ0) */ }; -void __init at91sam9g45_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91sam9g45_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} +struct at91_init_soc __initdata at91sam9g45_soc = { + .map_io = at91sam9g45_map_io, + .default_irq_priority = at91sam9g45_default_irq_priority, + .register_clocks = at91sam9g45_register_clocks, + .init = at91sam9g45_initialize, +}; diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 29dff18ed130..a238105d2c11 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -16,30 +16,16 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <mach/cpu.h> +#include <mach/at91_dbgu.h> #include <mach/at91sam9rl.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> #include <mach/at91_shdwc.h> +#include "soc.h" #include "generic.h" #include "clock.h" -static struct map_desc at91sam9rl_io_desc[] __initdata = { - { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc at91sam9rl_sram_desc[] __initdata = { - { - .pfn = __phys_to_pfn(AT91SAM9RL_SRAM_BASE), - .type = MT_DEVICE, - } -}; - /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -287,16 +273,11 @@ static void at91sam9rl_poweroff(void) * AT91SAM9RL processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9rl_map_io(void) +static void __init at91sam9rl_map_io(void) { - unsigned long cidr, sram_size; - - /* Map peripherals */ - iotable_init(at91sam9rl_io_desc, ARRAY_SIZE(at91sam9rl_io_desc)); - - cidr = at91_sys_read(AT91_DBGU_CIDR); + unsigned long sram_size; - switch (cidr & AT91_CIDR_SRAMSIZ) { + switch (at91_soc_initdata.cidr & AT91_CIDR_SRAMSIZ) { case AT91_CIDR_SRAMSIZ_32K: sram_size = 2 * SZ_16K; break; @@ -305,25 +286,16 @@ void __init at91sam9rl_map_io(void) sram_size = SZ_16K; } - at91sam9rl_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size; - at91sam9rl_sram_desc->length = sram_size; - /* Map SRAM */ - iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc)); + at91_init_sram(0, AT91SAM9RL_SRAM_BASE, sram_size); } -void __init at91sam9rl_initialize(unsigned long main_clock) +static void __init at91sam9rl_initialize(void) { at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9rl_poweroff; at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0); - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at91sam9rl_register_clocks(); - /* Register GPIO subsystem */ at91_gpio_init(at91sam9rl_gpio, 4); } @@ -370,14 +342,9 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -void __init at91sam9rl_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91sam9rl_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} +struct at91_init_soc __initdata at91sam9rl_soc = { + .map_io = at91sam9rl_map_io, + .default_irq_priority = at91sam9rl_default_irq_priority, + .register_clocks = at91sam9rl_register_clocks, + .init = at91sam9rl_initialize, +}; diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index ab1d463aa47d..5aa58851eb39 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -46,7 +46,7 @@ static void __init onearm_init_early(void) at91rm9200_set_type(ARCH_REVISON_9200_PQFP); /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -63,11 +63,6 @@ static void __init onearm_init_early(void) at91_set_serial_console(0); } -static void __init onearm_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata onearm_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -97,8 +92,8 @@ static void __init onearm_board_init(void) MACHINE_START(ONEARM, "Ajeco 1ARM single board computer") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = onearm_init_early, - .init_irq = onearm_init_irq, + .init_irq = at91_init_irq_default, .init_machine = onearm_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index a4924de48c36..b0c796d42e49 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -51,7 +51,7 @@ static void __init afeb9260_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -70,12 +70,6 @@ static void __init afeb9260_init_early(void) at91_set_serial_console(0); } -static void __init afeb9260_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -219,9 +213,9 @@ static void __init afeb9260_board_init(void) MACHINE_START(AFEB9260, "Custom afeb9260 board") /* Maintainer: Sergey Lapin <slapin@ossfans.org> */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = afeb9260_init_early, - .init_irq = afeb9260_init_irq, + .init_irq = at91_init_irq_default, .init_machine = afeb9260_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index 148fccb9a25a..d1abd5898e85 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -48,7 +48,7 @@ static void __init cam60_init_early(void) { /* Initialize processor: 10 MHz crystal */ - at91sam9260_initialize(10000000); + at91_initialize(10000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -57,12 +57,6 @@ static void __init cam60_init_early(void) at91_set_serial_console(0); } -static void __init cam60_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host */ @@ -199,8 +193,8 @@ static void __init cam60_board_init(void) MACHINE_START(CAM60, "KwikByte CAM60") /* Maintainer: KwikByte */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = cam60_init_early, - .init_irq = cam60_init_irq, + .init_irq = at91_init_irq_default, .init_machine = cam60_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index cdb65d483250..679b0b743e92 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -53,7 +53,7 @@ static void __init cap9adk_init_early(void) { /* Initialize processor: 12 MHz crystal */ - at91cap9_initialize(12000000); + at91_initialize(12000000); /* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */ at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11); @@ -65,12 +65,6 @@ static void __init cap9adk_init_early(void) at91_set_serial_console(0); } -static void __init cap9adk_init_irq(void) -{ - at91cap9_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -397,8 +391,8 @@ static void __init cap9adk_board_init(void) MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK") /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */ .timer = &at91sam926x_timer, - .map_io = at91cap9_map_io, + .map_io = at91_map_io, .init_early = cap9adk_init_early, - .init_irq = cap9adk_init_irq, + .init_irq = at91_init_irq_default, .init_machine = cap9adk_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index f36b18687494..c578c5d90728 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -43,7 +43,7 @@ static void __init carmeva_init_early(void) { /* Initialize processor: 20.000 MHz crystal */ - at91rm9200_initialize(20000000); + at91_initialize(20000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -57,11 +57,6 @@ static void __init carmeva_init_early(void) at91_set_serial_console(0); } -static void __init carmeva_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata carmeva_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -163,8 +158,8 @@ static void __init carmeva_board_init(void) MACHINE_START(CARMEVA, "Carmeva") /* Maintainer: Conitec Datasystems */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = carmeva_init_early, - .init_irq = carmeva_init_irq, + .init_irq = at91_init_irq_default, .init_machine = carmeva_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 980511084fe4..f4da8a16d5dc 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -50,7 +50,7 @@ static void __init cpu9krea_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* DGBU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -81,11 +81,6 @@ static void __init cpu9krea_init_early(void) at91_set_serial_console(0); } -static void __init cpu9krea_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - /* * USB Host port */ @@ -376,8 +371,8 @@ MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") #endif /* Maintainer: Eric Benard - EUKREA Electromatique */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = cpu9krea_init_early, - .init_irq = cpu9krea_init_irq, + .init_irq = at91_init_irq_default, .init_machine = cpu9krea_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 6daabe3907a1..2d919f5a4f57 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -57,7 +57,7 @@ static void __init cpuat91_init_early(void) at91rm9200_set_type(ARCH_REVISON_9200_PQFP); /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -82,11 +82,6 @@ static void __init cpuat91_init_early(void) at91_set_serial_console(0); } -static void __init cpuat91_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata cpuat91_eth_data = { .is_rmii = 1, }; @@ -180,8 +175,8 @@ static void __init cpuat91_board_init(void) MACHINE_START(CPUAT91, "Eukrea") /* Maintainer: Eric Benard - EUKREA Electromatique */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = cpuat91_init_early, - .init_irq = cpuat91_init_irq, + .init_irq = at91_init_irq_default, .init_machine = cpuat91_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index d98bcec1dfe0..17654d5e94e6 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -46,7 +46,7 @@ static void __init csb337_init_early(void) { /* Initialize processor: 3.6864 MHz crystal */ - at91rm9200_initialize(3686400); + at91_initialize(3686400); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); @@ -58,11 +58,6 @@ static void __init csb337_init_early(void) at91_set_serial_console(0); } -static void __init csb337_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata csb337_eth_data = { .phy_irq_pin = AT91_PIN_PC2, .is_rmii = 0, @@ -258,8 +253,8 @@ static void __init csb337_board_init(void) MACHINE_START(CSB337, "Cogent CSB337") /* Maintainer: Bill Gatliff */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = csb337_init_early, - .init_irq = csb337_init_irq, + .init_irq = at91_init_irq_default, .init_machine = csb337_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 019aab4e20b0..72b55674616c 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -43,7 +43,7 @@ static void __init csb637_init_early(void) { /* Initialize processor: 3.6864 MHz crystal */ - at91rm9200_initialize(3686400); + at91_initialize(3686400); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -52,11 +52,6 @@ static void __init csb637_init_early(void) at91_set_serial_console(0); } -static void __init csb637_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata csb637_eth_data = { .phy_irq_pin = AT91_PIN_PC0, .is_rmii = 0, @@ -139,8 +134,8 @@ static void __init csb637_board_init(void) MACHINE_START(CSB637, "Cogent CSB637") /* Maintainer: Bill Gatliff */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = csb637_init_early, - .init_irq = csb637_init_irq, + .init_irq = at91_init_irq_default, .init_machine = csb637_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index e9484535cbc8..01170a2766a8 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -43,7 +43,7 @@ static void __init eb9200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -60,11 +60,6 @@ static void __init eb9200_init_early(void) at91_set_serial_console(0); } -static void __init eb9200_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata eb9200_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -121,8 +116,8 @@ static void __init eb9200_board_init(void) MACHINE_START(ATEB9200, "Embest ATEB9200") .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = eb9200_init_early, - .init_irq = eb9200_init_irq, + .init_irq = at91_init_irq_default, .init_machine = eb9200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index a6f57faa10a7..7c0313c51f26 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -49,7 +49,7 @@ static void __init ecb_at91init_early(void) at91rm9200_set_type(ARCH_REVISON_9200_PQFP); /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7); @@ -64,11 +64,6 @@ static void __init ecb_at91init_early(void) at91_set_serial_console(0); } -static void __init ecb_at91init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata ecb_at91eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 0, @@ -173,8 +168,8 @@ static void __init ecb_at91board_init(void) MACHINE_START(ECBAT91, "emQbit's ECB_AT91") /* Maintainer: emQbit.com */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = ecb_at91init_early, - .init_irq = ecb_at91init_irq, + .init_irq = at91_init_irq_default, .init_machine = ecb_at91board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index bfc0062d1483..8252c722607b 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -35,7 +35,7 @@ static void __init eco920_init_early(void) /* Set cpu type: PQFP */ at91rm9200_set_type(ARCH_REVISON_9200_PQFP); - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); @@ -47,11 +47,6 @@ static void __init eco920_init_early(void) at91_set_serial_console(0); } -static void __init eco920_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata eco920_eth_data = { .phy_irq_pin = AT91_PIN_PC2, .is_rmii = 1, @@ -135,8 +130,8 @@ static void __init eco920_board_init(void) MACHINE_START(ECO920, "eco920") /* Maintainer: Sascha Hauer */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = eco920_init_early, - .init_irq = eco920_init_irq, + .init_irq = at91_init_irq_default, .init_machine = eco920_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index 466c063b8d21..4c3f65d9c59b 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -40,7 +40,7 @@ static void __init flexibity_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -49,11 +49,6 @@ static void __init flexibity_init_early(void) at91_set_serial_console(0); } -static void __init flexibity_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - /* USB Host port */ static struct at91_usbh_data __initdata flexibity_usbh_data = { .ports = 2, @@ -155,8 +150,8 @@ static void __init flexibity_board_init(void) MACHINE_START(FLEXIBITY, "Flexibity Connect") /* Maintainer: Maxim Osipov */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = flexibity_init_early, - .init_irq = flexibity_init_irq, + .init_irq = at91_init_irq_default, .init_machine = flexibity_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index e2d1dc9eff45..f27d1a780cfa 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -60,7 +60,7 @@ static void __init foxg20_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -101,12 +101,6 @@ static void __init foxg20_init_early(void) } -static void __init foxg20_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -267,8 +261,8 @@ static void __init foxg20_board_init(void) MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20") /* Maintainer: Sergio Tanzilli */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = foxg20_init_early, - .init_irq = foxg20_init_irq, + .init_irq = at91_init_irq_default, .init_machine = foxg20_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index 1d4f36b3cb27..2e95949737e6 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -75,11 +75,6 @@ static void __init gsia18s_init_early(void) at91_register_uart(AT91SAM9260_ID_US4, 5, 0); } -static void __init init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - /* * Two USB Host ports */ @@ -577,8 +572,8 @@ static void __init gsia18s_board_init(void) MACHINE_START(GSIA18S, "GS_IA18_S") .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = gsia18s_init_early, - .init_irq = init_irq, + .init_irq = at91_init_irq_default, .init_machine = gsia18s_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index 9b003ff744ba..4a170890b3b1 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -46,7 +46,7 @@ static void __init kafa_init_early(void) at91rm9200_set_type(ARCH_REVISON_9200_PQFP); /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* Set up the LEDs */ at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4); @@ -61,11 +61,6 @@ static void __init kafa_init_early(void) at91_set_serial_console(0); } -static void __init kafa_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata kafa_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 0, @@ -99,8 +94,8 @@ static void __init kafa_board_init(void) MACHINE_START(KAFA, "Sperry-Sun KAFA") /* Maintainer: Sergei Sharonov */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = kafa_init_early, - .init_irq = kafa_init_irq, + .init_irq = at91_init_irq_default, .init_machine = kafa_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index a813a74b65f9..9dc8d496ead1 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -48,7 +48,7 @@ static void __init kb9202_init_early(void) at91rm9200_set_type(ARCH_REVISON_9200_PQFP); /* Initialize processor: 10 MHz crystal */ - at91rm9200_initialize(10000000); + at91_initialize(10000000); /* Set up the LEDs */ at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18); @@ -69,11 +69,6 @@ static void __init kb9202_init_early(void) at91_set_serial_console(0); } -static void __init kb9202_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata kb9202_eth_data = { .phy_irq_pin = AT91_PIN_PB29, .is_rmii = 0, @@ -140,8 +135,8 @@ static void __init kb9202_board_init(void) MACHINE_START(KB9200, "KB920x") /* Maintainer: KwikByte, Inc. */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = kb9202_init_early, - .init_irq = kb9202_init_irq, + .init_irq = at91_init_irq_default, .init_machine = kb9202_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 961e805db68c..9bc6ab32e0ac 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -54,7 +54,7 @@ static void __init neocore926_init_early(void) { /* Initialize processor: 20 MHz crystal */ - at91sam9263_initialize(20000000); + at91_initialize(20000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -66,12 +66,6 @@ static void __init neocore926_init_early(void) at91_set_serial_console(0); } -static void __init neocore926_init_irq(void) -{ - at91sam9263_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -388,8 +382,8 @@ static void __init neocore926_board_init(void) MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926") /* Maintainer: ADENEO */ .timer = &at91sam926x_timer, - .map_io = at91sam9263_map_io, + .map_io = at91_map_io, .init_early = neocore926_init_early, - .init_irq = neocore926_init_irq, + .init_irq = at91_init_irq_default, .init_machine = neocore926_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index 21a21af25878..49e3f699b48e 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -53,13 +53,6 @@ static void __init pcontrol_g20_init_early(void) at91_register_uart(AT91SAM9260_ID_US4, 3, 0); } - -static void __init init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { { .ncs_read_setup = 16, .nrd_setup = 18, @@ -223,8 +216,8 @@ static void __init pcontrol_g20_board_init(void) MACHINE_START(PCONTROL_G20, "PControl G20") /* Maintainer: pgsellmann@portner-elektronik.at */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = pcontrol_g20_init_early, - .init_irq = init_irq, + .init_irq = at91_init_irq_default, .init_machine = pcontrol_g20_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 756cc2a745dd..b7b8390e8a00 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -46,7 +46,7 @@ static void __init picotux200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -60,11 +60,6 @@ static void __init picotux200_init_early(void) at91_set_serial_console(0); } -static void __init picotux200_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata picotux200_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -124,8 +119,8 @@ static void __init picotux200_board_init(void) MACHINE_START(PICOTUX2XX, "picotux 200") /* Maintainer: Kleinhenz Elektronik GmbH */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = picotux200_init_early, - .init_irq = picotux200_init_irq, + .init_irq = at91_init_irq_default, .init_machine = picotux200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index d1a6001b0bd8..81f911033681 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -51,7 +51,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ - at91sam9260_initialize(12000000); + at91_initialize(12000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -72,12 +72,6 @@ static void __init ek_init_early(void) } -static void __init ek_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -269,8 +263,8 @@ static void __init ek_board_init(void) MACHINE_START(QIL_A9260, "CALAO QIL_A9260") /* Maintainer: calao-systems */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index aef9627710b0..6f08faadb474 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -48,7 +48,7 @@ static void __init dk_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); @@ -65,11 +65,6 @@ static void __init dk_init_early(void) at91_set_serial_console(0); } -static void __init dk_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata dk_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -228,8 +223,8 @@ static void __init dk_board_init(void) MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") /* Maintainer: SAN People/Atmel */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = dk_init_early, - .init_irq = dk_init_irq, + .init_irq = at91_init_irq_default, .init_machine = dk_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 015a02183080..85bcccd7b9e4 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -48,7 +48,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); @@ -65,11 +65,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata ek_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -194,8 +189,8 @@ static void __init ek_board_init(void) MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") /* Maintainer: SAN People/Atmel */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index aaf1bf0989b3..4d3a02f1289e 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -47,7 +47,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6); @@ -67,12 +67,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -213,8 +207,8 @@ static void __init ek_board_init(void) MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") /* Maintainer: Olimex */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 5c240743c5b7..8a50c3e67186 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -53,7 +53,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -70,12 +70,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -354,8 +348,8 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index b60c22b6e241..5096a0ec50c1 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -57,7 +57,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9261_initialize(18432000); + at91_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14); @@ -69,12 +69,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9261_init_interrupts(NULL); -} - - /* * DM9000 ethernet device */ @@ -621,8 +615,8 @@ MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") #endif /* Maintainer: Atmel */ .timer = &at91sam926x_timer, - .map_io = at91sam9261_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 9bbdc92ea194..ea8f185d3b9d 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -56,7 +56,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 16.367 MHz crystal */ - at91sam9263_initialize(16367660); + at91_initialize(16367660); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -68,12 +68,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9263_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -452,8 +446,8 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, - .map_io = at91sam9263_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 1325a50101a8..817f59d7251b 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -64,7 +64,7 @@ static int inline ek_have_2mmc(void) static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -81,12 +81,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -404,17 +398,17 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 33eaa135f248..ad234ccbf57e 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -50,7 +50,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ - at91sam9g45_initialize(12000000); + at91_initialize(12000000); /* DGBU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -63,12 +63,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9g45_init_interrupts(NULL); -} - - /* * USB HS Host port (common to OHCI & EHCI) */ @@ -422,8 +416,8 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, - .map_io = at91sam9g45_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index effb399a80a6..4f14b54b93a8 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -41,7 +41,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ - at91sam9rl_initialize(12000000); + at91_initialize(12000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -53,12 +53,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9rl_init_interrupts(NULL); -} - - /* * USB HS Device port */ @@ -330,8 +324,8 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, - .map_io = at91sam9rl_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 6010ce16b3cf..c73d25e5faea 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -42,7 +42,7 @@ static void __init snapper9260_init_early(void) { - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* Debug on ttyS0 */ at91_register_uart(0, 0, 0); @@ -55,11 +55,6 @@ static void __init snapper9260_init_early(void) at91_register_uart(AT91SAM9260_ID_US2, 3, 0); } -static void __init snapper9260_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - static struct at91_usbh_data __initdata snapper9260_usbh_data = { .ports = 2, }; @@ -179,9 +174,9 @@ static void __init snapper9260_board_init(void) MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = snapper9260_init_early, - .init_irq = snapper9260_init_irq, + .init_irq = at91_init_irq_default, .init_machine = snapper9260_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index 5e5c85688f5f..936e5fd7f406 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -35,7 +35,7 @@ void __init stamp9g20_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* DGBU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -76,12 +76,6 @@ static void __init portuxg20_init_early(void) at91_register_uart(AT91SAM9260_ID_US5, 6, 0); } -static void __init init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * NAND flash */ @@ -299,17 +293,17 @@ static void __init stamp9g20evb_board_init(void) MACHINE_START(PORTUXG20, "taskit PortuxG20") /* Maintainer: taskit GmbH */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = portuxg20_init_early, - .init_irq = init_irq, + .init_irq = at91_init_irq_default, .init_machine = portuxg20_board_init, MACHINE_END MACHINE_START(STAMP9G20, "taskit Stamp9G20") /* Maintainer: taskit GmbH */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = stamp9g20evb_init_early, - .init_irq = init_irq, + .init_irq = at91_init_irq_default, .init_machine = stamp9g20evb_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c index 0e784e6fedec..8c4c1a02c4be 100644 --- a/arch/arm/mach-at91/board-usb-a9260.c +++ b/arch/arm/mach-at91/board-usb-a9260.c @@ -51,7 +51,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ - at91sam9260_initialize(12000000); + at91_initialize(12000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -60,12 +60,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -229,8 +223,8 @@ static void __init ek_board_init(void) MACHINE_START(USB_A9260, "CALAO USB_A9260") /* Maintainer: calao-systems */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c index cf626dd14b2c..25e793782a4e 100644 --- a/arch/arm/mach-at91/board-usb-a9263.c +++ b/arch/arm/mach-at91/board-usb-a9263.c @@ -50,7 +50,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 12.00 MHz crystal */ - at91sam9263_initialize(12000000); + at91_initialize(12000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -59,12 +59,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9263_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -245,8 +239,8 @@ static void __init ek_board_init(void) MACHINE_START(USB_A9263, "CALAO USB_A9263") /* Maintainer: calao-systems */ .timer = &at91sam926x_timer, - .map_io = at91sam9263_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index c208cc334d7d..95edcbd2aec6 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -56,7 +56,7 @@ static void __init yl9200_init_early(void) at91rm9200_set_type(ARCH_REVISON_9200_PQFP); /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */ at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17); @@ -79,12 +79,6 @@ static void __init yl9200_init_early(void) at91_set_serial_console(0); } -static void __init yl9200_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - - /* * LEDs */ @@ -599,8 +593,8 @@ static void __init yl9200_board_init(void) MACHINE_START(YL9200, "uCdragon YL-9200") /* Maintainer: S.Birtles */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = yl9200_init_early, - .init_irq = yl9200_init_irq, + .init_irq = at91_init_irq_default, .init_machine = yl9200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 8ff3418f3430..938b34f57741 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -11,35 +11,19 @@ #include <linux/clkdev.h> /* Map io */ -extern void __init at91rm9200_map_io(void); -extern void __init at91sam9260_map_io(void); -extern void __init at91sam9261_map_io(void); -extern void __init at91sam9263_map_io(void); -extern void __init at91sam9rl_map_io(void); -extern void __init at91sam9g45_map_io(void); -extern void __init at91x40_map_io(void); -extern void __init at91cap9_map_io(void); +extern void __init at91_map_io(void); +extern void __init at91_init_sram(int bank, unsigned long base, + unsigned int length); /* Processors */ extern void __init at91rm9200_set_type(int type); -extern void __init at91rm9200_initialize(unsigned long main_clock); -extern void __init at91sam9260_initialize(unsigned long main_clock); -extern void __init at91sam9261_initialize(unsigned long main_clock); -extern void __init at91sam9263_initialize(unsigned long main_clock); -extern void __init at91sam9rl_initialize(unsigned long main_clock); -extern void __init at91sam9g45_initialize(unsigned long main_clock); +extern void __init at91_initialize(unsigned long main_clock); extern void __init at91x40_initialize(unsigned long main_clock); -extern void __init at91cap9_initialize(unsigned long main_clock); /* Interrupts */ -extern void __init at91rm9200_init_interrupts(unsigned int priority[]); -extern void __init at91sam9260_init_interrupts(unsigned int priority[]); -extern void __init at91sam9261_init_interrupts(unsigned int priority[]); -extern void __init at91sam9263_init_interrupts(unsigned int priority[]); -extern void __init at91sam9rl_init_interrupts(unsigned int priority[]); -extern void __init at91sam9g45_init_interrupts(unsigned int priority[]); +extern void __init at91_init_irq_default(void); +extern void __init at91_init_interrupts(unsigned int priority[]); extern void __init at91x40_init_interrupts(unsigned int priority[]); -extern void __init at91cap9_init_interrupts(unsigned int priority[]); extern void __init at91_aic_init(unsigned int priority[]); /* Timer */ @@ -49,7 +33,6 @@ extern struct sys_timer at91sam926x_timer; extern struct sys_timer at91x40_timer; /* Clocks */ -extern int __init at91_clock_init(unsigned long main_clock); /* * function to specify the clock of the default console. As we do not * use the device/driver bus, the dev_name is not intialize. So we need @@ -62,6 +45,11 @@ extern void __init at91sam9263_set_console_clock(int id); extern void __init at91sam9rl_set_console_clock(int id); extern void __init at91sam9g45_set_console_clock(int id); extern void __init at91cap9_set_console_clock(int id); +#ifdef CONFIG_AT91_PMC_UNIT +extern int __init at91_clock_init(unsigned long main_clock); +#else +static int inline at91_clock_init(unsigned long main_clock) { return 0; } +#endif struct device; /* Power Management */ diff --git a/arch/arm/mach-at91/include/mach/at91_dbgu.h b/arch/arm/mach-at91/include/mach/at91_dbgu.h index 6dcaa7716871..dbfe455a4c41 100644 --- a/arch/arm/mach-at91/include/mach/at91_dbgu.h +++ b/arch/arm/mach-at91/include/mach/at91_dbgu.h @@ -16,22 +16,25 @@ #ifndef AT91_DBGU_H #define AT91_DBGU_H +#define dbgu_readl(dbgu, field) \ + __raw_readl(AT91_VA_BASE_SYS + dbgu + AT91_DBGU_ ## field) + #ifdef AT91_DBGU -#define AT91_DBGU_CR (AT91_DBGU + 0x00) /* Control Register */ -#define AT91_DBGU_MR (AT91_DBGU + 0x04) /* Mode Register */ -#define AT91_DBGU_IER (AT91_DBGU + 0x08) /* Interrupt Enable Register */ +#define AT91_DBGU_CR (0x00) /* Control Register */ +#define AT91_DBGU_MR (0x04) /* Mode Register */ +#define AT91_DBGU_IER (0x08) /* Interrupt Enable Register */ #define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */ #define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */ -#define AT91_DBGU_IDR (AT91_DBGU + 0x0c) /* Interrupt Disable Register */ -#define AT91_DBGU_IMR (AT91_DBGU + 0x10) /* Interrupt Mask Register */ -#define AT91_DBGU_SR (AT91_DBGU + 0x14) /* Status Register */ -#define AT91_DBGU_RHR (AT91_DBGU + 0x18) /* Receiver Holding Register */ -#define AT91_DBGU_THR (AT91_DBGU + 0x1c) /* Transmitter Holding Register */ -#define AT91_DBGU_BRGR (AT91_DBGU + 0x20) /* Baud Rate Generator Register */ +#define AT91_DBGU_IDR (0x0c) /* Interrupt Disable Register */ +#define AT91_DBGU_IMR (0x10) /* Interrupt Mask Register */ +#define AT91_DBGU_SR (0x14) /* Status Register */ +#define AT91_DBGU_RHR (0x18) /* Receiver Holding Register */ +#define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */ +#define AT91_DBGU_BRGR (0x20) /* Baud Rate Generator Register */ -#define AT91_DBGU_CIDR (AT91_DBGU + 0x40) /* Chip ID Register */ -#define AT91_DBGU_EXID (AT91_DBGU + 0x44) /* Chip ID Extension Register */ -#define AT91_DBGU_FNR (AT91_DBGU + 0x48) /* Force NTRST Register [SAM9 only] */ +#define AT91_DBGU_CIDR (0x40) /* Chip ID Register */ +#define AT91_DBGU_EXID (0x44) /* Chip ID Extension Register */ +#define AT91_DBGU_FNR (0x48) /* Force NTRST Register [SAM9 only] */ #define AT91_DBGU_FNTRST (1 << 0) /* Force NTRST */ #endif /* AT91_DBGU */ diff --git a/arch/arm/mach-at91/include/mach/at91_wdt.h b/arch/arm/mach-at91/include/mach/at91_wdt.h deleted file mode 100644 index fecc2e9f0ca8..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_wdt.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_wdt.h - * - * Copyright (C) 2007 Andrew Victor - * Copyright (C) 2007 Atmel Corporation. - * - * Watchdog Timer (WDT) - System peripherals regsters. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_WDT_H -#define AT91_WDT_H - -#define AT91_WDT_CR (AT91_WDT + 0x00) /* Watchdog Control Register */ -#define AT91_WDT_WDRSTT (1 << 0) /* Restart */ -#define AT91_WDT_KEY (0xa5 << 24) /* KEY Password */ - -#define AT91_WDT_MR (AT91_WDT + 0x04) /* Watchdog Mode Register */ -#define AT91_WDT_WDV (0xfff << 0) /* Counter Value */ -#define AT91_WDT_WDFIEN (1 << 12) /* Fault Interrupt Enable */ -#define AT91_WDT_WDRSTEN (1 << 13) /* Reset Processor */ -#define AT91_WDT_WDRPROC (1 << 14) /* Timer Restart */ -#define AT91_WDT_WDDIS (1 << 15) /* Watchdog Disable */ -#define AT91_WDT_WDD (0xfff << 16) /* Delta Value */ -#define AT91_WDT_WDDBGHLT (1 << 28) /* Debug Halt */ -#define AT91_WDT_WDIDLEHLT (1 << 29) /* Idle Halt */ - -#define AT91_WDT_SR (AT91_WDT + 0x08) /* Watchdog Status Register */ -#define AT91_WDT_WDUNF (1 << 0) /* Watchdog Underflow */ -#define AT91_WDT_WDERR (1 << 1) /* Watchdog Error */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h index 665993849a7b..c5df1e8f1955 100644 --- a/arch/arm/mach-at91/include/mach/at91cap9.h +++ b/arch/arm/mach-at91/include/mach/at91cap9.h @@ -75,7 +75,6 @@ #define AT91CAP9_BASE_EMAC 0xfffbc000 #define AT91CAP9_BASE_ADC 0xfffc0000 #define AT91CAP9_BASE_ISI 0xfffc4000 -#define AT91_BASE_SYS 0xffffe200 /* * System Peripherals (offset from AT91_BASE_SYS) diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h index 99e0f8d02d7b..e4037b500302 100644 --- a/arch/arm/mach-at91/include/mach/at91rm9200.h +++ b/arch/arm/mach-at91/include/mach/at91rm9200.h @@ -74,7 +74,6 @@ #define AT91RM9200_BASE_SSC1 0xfffd4000 #define AT91RM9200_BASE_SSC2 0xfffd8000 #define AT91RM9200_BASE_SPI 0xfffe0000 -#define AT91_BASE_SYS 0xfffff000 /* diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h index 8b6bf835cd73..9a791165913f 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9260.h +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h @@ -76,7 +76,6 @@ #define AT91SAM9260_BASE_TC4 0xfffdc040 #define AT91SAM9260_BASE_TC5 0xfffdc080 #define AT91SAM9260_BASE_ADC 0xfffe0000 -#define AT91_BASE_SYS 0xffffe800 /* * System Peripherals (offset from AT91_BASE_SYS) diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h index eafbddaf523c..ce596204cefa 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9261.h +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h @@ -60,7 +60,6 @@ #define AT91SAM9261_BASE_SSC2 0xfffc4000 #define AT91SAM9261_BASE_SPI0 0xfffc8000 #define AT91SAM9261_BASE_SPI1 0xfffcc000 -#define AT91_BASE_SYS 0xffffea00 /* diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h index e2d348213a7b..f1b92961a2b1 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9263.h +++ b/arch/arm/mach-at91/include/mach/at91sam9263.h @@ -70,7 +70,6 @@ #define AT91SAM9263_BASE_EMAC 0xfffbc000 #define AT91SAM9263_BASE_ISI 0xfffc4000 #define AT91SAM9263_BASE_2DGE 0xfffc8000 -#define AT91_BASE_SYS 0xffffe000 /* * System Peripherals (offset from AT91_BASE_SYS) diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index 659304aa73d9..2c611b9a0138 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -82,7 +82,6 @@ #define AT91SAM9G45_BASE_TC3 0xfffd4000 #define AT91SAM9G45_BASE_TC4 0xfffd4040 #define AT91SAM9G45_BASE_TC5 0xfffd4080 -#define AT91_BASE_SYS 0xffffe200 /* * System Peripherals (offset from AT91_BASE_SYS) diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h index 41dbbe61055c..1aabacd315d4 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9rl.h +++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h @@ -64,7 +64,6 @@ #define AT91SAM9RL_BASE_TSC 0xfffd0000 #define AT91SAM9RL_BASE_UDPHS 0xfffd4000 #define AT91SAM9RL_BASE_AC97C 0xfffd8000 -#define AT91_BASE_SYS 0xffffc000 /* diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index df966c2bc2d4..f6ce936dba2b 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -1,7 +1,8 @@ /* * arch/arm/mach-at91/include/mach/cpu.h * - * Copyright (C) 2006 SAN People + * Copyright (C) 2006 SAN People + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -10,12 +11,8 @@ * */ -#ifndef __ASM_ARCH_CPU_H -#define __ASM_ARCH_CPU_H - -#include <mach/hardware.h> -#include <mach/at91_dbgu.h> - +#ifndef __MACH_CPU_H__ +#define __MACH_CPU_H__ #define ARCH_ID_AT91RM9200 0x09290780 #define ARCH_ID_AT91SAM9260 0x019803a0 @@ -39,16 +36,6 @@ #define ARCH_ID_AT91M40807 0x14080745 #define ARCH_ID_AT91R40008 0x44000840 -static inline unsigned long at91_cpu_identify(void) -{ - return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION); -} - -static inline unsigned long at91_cpu_fully_identify(void) -{ - return at91_sys_read(AT91_DBGU_CIDR); -} - #define ARCH_EXID_AT91SAM9M11 0x00000001 #define ARCH_EXID_AT91SAM9M10 0x00000002 #define ARCH_EXID_AT91SAM9G46 0x00000003 @@ -60,40 +47,80 @@ static inline unsigned long at91_cpu_fully_identify(void) #define ARCH_EXID_AT91SAM9G25 0x00000003 #define ARCH_EXID_AT91SAM9X25 0x00000004 -static inline unsigned long at91_exid_identify(void) -{ - return at91_sys_read(AT91_DBGU_EXID); -} - - #define ARCH_FAMILY_AT91X92 0x09200000 #define ARCH_FAMILY_AT91SAM9 0x01900000 #define ARCH_FAMILY_AT91SAM9XE 0x02900000 -static inline unsigned long at91_arch_identify(void) -{ - return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH); -} - -#ifdef CONFIG_ARCH_AT91CAP9 -#include <mach/at91_pmc.h> - +/* PMC revision */ #define ARCH_REVISION_CAP9_B 0x399 #define ARCH_REVISION_CAP9_C 0x601 -static inline unsigned long at91cap9_rev_identify(void) +/* RM9200 type */ +#define ARCH_REVISON_9200_BGA (0 << 0) +#define ARCH_REVISON_9200_PQFP (1 << 0) + +enum at91_soc_type { + /* 920T */ + AT91_SOC_RM9200, + + /* CAP */ + AT91_SOC_CAP9, + + /* SAM92xx */ + AT91_SOC_SAM9260, AT91_SOC_SAM9261, AT91_SOC_SAM9263, + + /* SAM9Gxx */ + AT91_SOC_SAM9G10, AT91_SOC_SAM9G20, AT91_SOC_SAM9G45, + + /* SAM9RL */ + AT91_SOC_SAM9RL, + + /* SAM9X5 */ + AT91_SOC_SAM9X5, + + /* Unknown type */ + AT91_SOC_NONE +}; + +enum at91_soc_subtype { + /* RM9200 */ + AT91_SOC_RM9200_BGA, AT91_SOC_RM9200_PQFP, + + /* CAP9 */ + AT91_SOC_CAP9_REV_B, AT91_SOC_CAP9_REV_C, + + /* SAM9260 */ + AT91_SOC_SAM9XE, + + /* SAM9G45 */ + AT91_SOC_SAM9G45ES, AT91_SOC_SAM9M10, AT91_SOC_SAM9G46, AT91_SOC_SAM9M11, + + /* SAM9X5 */ + AT91_SOC_SAM9G15, AT91_SOC_SAM9G35, AT91_SOC_SAM9X35, + AT91_SOC_SAM9G25, AT91_SOC_SAM9X25, + + /* Unknown subtype */ + AT91_SOC_SUBTYPE_NONE +}; + +struct at91_socinfo { + unsigned int type, subtype; + unsigned int cidr, exid; +}; + +extern struct at91_socinfo at91_soc_initdata; +const char *at91_get_soc_type(struct at91_socinfo *c); +const char *at91_get_soc_subtype(struct at91_socinfo *c); + +static inline int at91_soc_is_detected(void) { - return (at91_sys_read(AT91_PMC_VER)); + return at91_soc_initdata.type != AT91_SOC_NONE; } -#endif #ifdef CONFIG_ARCH_AT91RM9200 -extern int rm9200_type; -#define ARCH_REVISON_9200_BGA (0 << 0) -#define ARCH_REVISON_9200_PQFP (1 << 0) -#define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200) -#define cpu_is_at91rm9200_bga() (!cpu_is_at91rm9200_pqfp()) -#define cpu_is_at91rm9200_pqfp() (cpu_is_at91rm9200() && rm9200_type & ARCH_REVISON_9200_PQFP) +#define cpu_is_at91rm9200() (at91_soc_initdata.type == AT91_SOC_RM9200) +#define cpu_is_at91rm9200_bga() (at91_soc_initdata.subtype == AT91_SOC_RM9200_BGA) +#define cpu_is_at91rm9200_pqfp() (at91_soc_initdata.subtype == AT91_SOC_RM9200_PQFP) #else #define cpu_is_at91rm9200() (0) #define cpu_is_at91rm9200_bga() (0) @@ -101,52 +128,49 @@ extern int rm9200_type; #endif #ifdef CONFIG_ARCH_AT91SAM9260 -#define cpu_is_at91sam9xe() (at91_arch_identify() == ARCH_FAMILY_AT91SAM9XE) -#define cpu_is_at91sam9260() ((at91_cpu_identify() == ARCH_ID_AT91SAM9260) || cpu_is_at91sam9xe()) +#define cpu_is_at91sam9xe() (at91_soc_initdata.subtype == AT91_SOC_SAM9XE) +#define cpu_is_at91sam9260() (at91_soc_initdata.type == AT91_SOC_SAM9260) #else #define cpu_is_at91sam9xe() (0) #define cpu_is_at91sam9260() (0) #endif #ifdef CONFIG_ARCH_AT91SAM9G20 -#define cpu_is_at91sam9g20() (at91_cpu_identify() == ARCH_ID_AT91SAM9G20) +#define cpu_is_at91sam9g20() (at91_soc_initdata.type == AT91_SOC_SAM9G20) #else #define cpu_is_at91sam9g20() (0) #endif #ifdef CONFIG_ARCH_AT91SAM9261 -#define cpu_is_at91sam9261() (at91_cpu_identify() == ARCH_ID_AT91SAM9261) +#define cpu_is_at91sam9261() (at91_soc_initdata.type == AT91_SOC_SAM9261) #else #define cpu_is_at91sam9261() (0) #endif #ifdef CONFIG_ARCH_AT91SAM9G10 -#define cpu_is_at91sam9g10() ((at91_cpu_identify() & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) +#define cpu_is_at91sam9g10() (at91_soc_initdata.type == AT91_SOC_SAM9G10) #else #define cpu_is_at91sam9g10() (0) #endif #ifdef CONFIG_ARCH_AT91SAM9263 -#define cpu_is_at91sam9263() (at91_cpu_identify() == ARCH_ID_AT91SAM9263) +#define cpu_is_at91sam9263() (at91_soc_initdata.type == AT91_SOC_SAM9263) #else #define cpu_is_at91sam9263() (0) #endif #ifdef CONFIG_ARCH_AT91SAM9RL -#define cpu_is_at91sam9rl() (at91_cpu_identify() == ARCH_ID_AT91SAM9RL64) +#define cpu_is_at91sam9rl() (at91_soc_initdata.type == AT91_SOC_SAM9RL) #else #define cpu_is_at91sam9rl() (0) #endif #ifdef CONFIG_ARCH_AT91SAM9G45 -#define cpu_is_at91sam9g45() (at91_cpu_identify() == ARCH_ID_AT91SAM9G45) -#define cpu_is_at91sam9g45es() (at91_cpu_fully_identify() == ARCH_ID_AT91SAM9G45ES) -#define cpu_is_at91sam9m10() (cpu_is_at91sam9g45() && \ - (at91_exid_identify() == ARCH_EXID_AT91SAM9M10)) -#define cpu_is_at91sam9m46() (cpu_is_at91sam9g45() && \ - (at91_exid_identify() == ARCH_EXID_AT91SAM9G46)) -#define cpu_is_at91sam9m11() (cpu_is_at91sam9g45() && \ - (at91_exid_identify() == ARCH_EXID_AT91SAM9M11)) +#define cpu_is_at91sam9g45() (at91_soc_initdata.type == AT91_SOC_SAM9G45) +#define cpu_is_at91sam9g45es() (at91_soc_initdata.subtype == AT91_SOC_SAM9G45ES) +#define cpu_is_at91sam9m10() (at91_soc_initdata.subtype == AT91_SOC_SAM9M10) +#define cpu_is_at91sam9g46() (at91_soc_initdata.subtype == AT91_SOC_SAM9G46) +#define cpu_is_at91sam9m11() (at91_soc_initdata.subtype == AT91_SOC_SAM9M11) #else #define cpu_is_at91sam9g45() (0) #define cpu_is_at91sam9g45es() (0) @@ -156,17 +180,12 @@ extern int rm9200_type; #endif #ifdef CONFIG_ARCH_AT91SAM9X5 -#define cpu_is_at91sam9x5() (at91_cpu_identify() == ARCH_ID_AT91SAM9X5) -#define cpu_is_at91sam9g15() (cpu_is_at91sam9x5() && \ - (at91_exid_identify() == ARCH_EXID_AT91SAM9G15)) -#define cpu_is_at91sam9g35() (cpu_is_at91sam9x5() && \ - (at91_exid_identify() == ARCH_EXID_AT91SAM9G35)) -#define cpu_is_at91sam9x35() (cpu_is_at91sam9x5() && \ - (at91_exid_identify() == ARCH_EXID_AT91SAM9X35)) -#define cpu_is_at91sam9g25() (cpu_is_at91sam9x5() && \ - (at91_exid_identify() == ARCH_EXID_AT91SAM9G25)) -#define cpu_is_at91sam9x25() (cpu_is_at91sam9x5() && \ - (at91_exid_identify() == ARCH_EXID_AT91SAM9X25)) +#define cpu_is_at91sam9x5() (at91_soc_initdata.type == AT91_SOC_SAM9X5) +#define cpu_is_at91sam9g15() (at91_soc_initdata.subtype == AT91_SOC_SAM9G15) +#define cpu_is_at91sam9g35() (at91_soc_initdata.subtype == AT91_SOC_SAM9G35) +#define cpu_is_at91sam9x35() (at91_soc_initdata.subtype == AT91_SOC_SAM9X35) +#define cpu_is_at91sam9g25() (at91_soc_initdata.subtype == AT91_SOC_SAM9G25) +#define cpu_is_at91sam9x25() (at91_soc_initdata.subtype == AT91_SOC_SAM9X25) #else #define cpu_is_at91sam9x5() (0) #define cpu_is_at91sam9g15() (0) @@ -177,9 +196,9 @@ extern int rm9200_type; #endif #ifdef CONFIG_ARCH_AT91CAP9 -#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9) -#define cpu_is_at91cap9_revB() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_B) -#define cpu_is_at91cap9_revC() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_C) +#define cpu_is_at91cap9() (at91_soc_initdata.type == AT91_SOC_CAP9) +#define cpu_is_at91cap9_revB() (at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_B) +#define cpu_is_at91cap9_revC() (at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_C) #else #define cpu_is_at91cap9() (0) #define cpu_is_at91cap9_revB() (0) @@ -192,4 +211,4 @@ extern int rm9200_type; */ #define cpu_is_at32ap7000() (0) -#endif +#endif /* __MACH_CPU_H__ */ diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S index 0f959faf74a9..bc1e0b2e2f4f 100644 --- a/arch/arm/mach-at91/include/mach/debug-macro.S +++ b/arch/arm/mach-at91/include/mach/debug-macro.S @@ -15,23 +15,23 @@ #include <mach/at91_dbgu.h> .macro addruart, rp, rv - ldr \rp, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address) - ldr \rv, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address) + ldr \rp, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address) + ldr \rv, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address) .endm .macro senduart,rd,rx - strb \rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)] @ Write to Transmitter Holding Register + strb \rd, [\rx, #(AT91_DBGU_THR)] @ Write to Transmitter Holding Register .endm .macro waituart,rd,rx -1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register - tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit +1001: ldr \rd, [\rx, #(AT91_DBGU_SR)] @ Read Status Register + tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit beq 1001b .endm .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register - tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete +1001: ldr \rd, [\rx, #(AT91_DBGU_SR)] @ Read Status Register + tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete beq 1001b .endm diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 1008b9fb5074..483478d8be6b 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -36,6 +36,20 @@ #error "Unsupported AT91 processor" #endif +#if !defined(CONFIG_ARCH_AT91X40) +/* + * On all at91 except rm9200 and x40 have the System Controller starts + * at address 0xffffc000 and has a size of 16KiB. + * + * On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting + * at 0xfffff000 + * + * Removes the individual definitions of AT91_BASE_SYS and + * replaces them with a common version at base 0xfffffc000 and size 16KiB + * and map the same memory space + */ +#define AT91_BASE_SYS 0xffffc000 +#endif /* * Peripheral identifiers/interrupts. diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h index 0b0cccc46e68..4298e7806c76 100644 --- a/arch/arm/mach-at91/include/mach/io.h +++ b/arch/arm/mach-at91/include/mach/io.h @@ -21,14 +21,23 @@ #ifndef __ASM_ARCH_IO_H #define __ASM_ARCH_IO_H +#include <mach/hardware.h> + #define IO_SPACE_LIMIT 0xFFFFFFFF #define __io(a) __typesafe_io(a) #define __mem_pci(a) (a) - #ifndef __ASSEMBLY__ +#ifndef CONFIG_ARCH_AT91X40 +#define __arch_ioremap at91_ioremap +#define __arch_iounmap at91_iounmap +#endif + +void __iomem *at91_ioremap(unsigned long phys, size_t size, unsigned int type); +void at91_iounmap(volatile void __iomem *addr); + static inline unsigned int at91_sys_read(unsigned int reg_offset) { void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c new file mode 100644 index 000000000000..aa64294c7db3 --- /dev/null +++ b/arch/arm/mach-at91/setup.c @@ -0,0 +1,297 @@ +/* + * Copyright (C) 2007 Atmel Corporation. + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Under GPLv2 + */ + +#include <linux/module.h> +#include <linux/io.h> +#include <linux/mm.h> + +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/cpu.h> +#include <mach/at91_dbgu.h> +#include <mach/at91_pmc.h> + +#include "soc.h" +#include "generic.h" + +struct at91_init_soc __initdata at91_boot_soc; + +struct at91_socinfo at91_soc_initdata; +EXPORT_SYMBOL(at91_soc_initdata); + +void __init at91rm9200_set_type(int type) +{ + if (type == ARCH_REVISON_9200_PQFP) + at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; + else + at91_soc_initdata.subtype = AT91_SOC_RM9200_PQFP; +} + +void __init at91_init_irq_default(void) +{ + at91_init_interrupts(at91_boot_soc.default_irq_priority); +} + +void __init at91_init_interrupts(unsigned int *priority) +{ + /* Initialize the AIC interrupt controller */ + at91_aic_init(priority); + + /* Enable GPIO interrupts */ + at91_gpio_irq_setup(); +} + +static struct map_desc sram_desc[2] __initdata; + +void __init at91_init_sram(int bank, unsigned long base, unsigned int length) +{ + struct map_desc *desc = &sram_desc[bank]; + + desc->virtual = AT91_IO_VIRT_BASE - length; + if (bank > 0) + desc->virtual -= sram_desc[bank - 1].length; + + desc->pfn = __phys_to_pfn(base); + desc->length = length; + desc->type = MT_DEVICE; + + pr_info("AT91: sram at 0x%lx of 0x%x mapped at 0x%lx\n", + base, length, desc->virtual); + + iotable_init(desc, 1); +} + +static struct map_desc at91_io_desc __initdata = { + .virtual = AT91_VA_BASE_SYS, + .pfn = __phys_to_pfn(AT91_BASE_SYS), + .length = SZ_16K, + .type = MT_DEVICE, +}; + +void __iomem *at91_ioremap(unsigned long p, size_t size, unsigned int type) +{ + if (p >= AT91_BASE_SYS && p <= (AT91_BASE_SYS + SZ_16K - 1)) + return (void __iomem *)AT91_IO_P2V(p); + + return __arm_ioremap_caller(p, size, type, __builtin_return_address(0)); +} +EXPORT_SYMBOL(at91_ioremap); + +void at91_iounmap(volatile void __iomem *addr) +{ + unsigned long virt = (unsigned long)addr; + + if (virt >= VMALLOC_START && virt < VMALLOC_END) + __iounmap(addr); +} +EXPORT_SYMBOL(at91_iounmap); + +#define AT91_DBGU0 0xfffff200 +#define AT91_DBGU1 0xffffee00 + +static void __init soc_detect(u32 dbgu_base) +{ + u32 cidr, socid; + + cidr = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_CIDR); + socid = cidr & ~AT91_CIDR_VERSION; + + switch (socid) { + case ARCH_ID_AT91CAP9: { +#ifdef CONFIG_AT91_PMC_UNIT + u32 pmc_ver = at91_sys_read(AT91_PMC_VER); + + if (pmc_ver == ARCH_REVISION_CAP9_B) + at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_B; + else if (pmc_ver == ARCH_REVISION_CAP9_C) + at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_C; +#endif + at91_soc_initdata.type = AT91_SOC_CAP9; + at91_boot_soc = at91cap9_soc; + break; + } + + case ARCH_ID_AT91RM9200: + at91_soc_initdata.type = AT91_SOC_RM9200; + at91_boot_soc = at91rm9200_soc; + break; + + case ARCH_ID_AT91SAM9260: + at91_soc_initdata.type = AT91_SOC_SAM9260; + at91_boot_soc = at91sam9260_soc; + break; + + case ARCH_ID_AT91SAM9261: + at91_soc_initdata.type = AT91_SOC_SAM9261; + at91_boot_soc = at91sam9261_soc; + break; + + case ARCH_ID_AT91SAM9263: + at91_soc_initdata.type = AT91_SOC_SAM9263; + at91_boot_soc = at91sam9263_soc; + break; + + case ARCH_ID_AT91SAM9G20: + at91_soc_initdata.type = AT91_SOC_SAM9G20; + at91_boot_soc = at91sam9260_soc; + break; + + case ARCH_ID_AT91SAM9G45: + at91_soc_initdata.type = AT91_SOC_SAM9G45; + if (cidr == ARCH_ID_AT91SAM9G45ES) + at91_soc_initdata.subtype = AT91_SOC_SAM9G45ES; + at91_boot_soc = at91sam9g45_soc; + break; + + case ARCH_ID_AT91SAM9RL64: + at91_soc_initdata.type = AT91_SOC_SAM9RL; + at91_boot_soc = at91sam9rl_soc; + break; + + case ARCH_ID_AT91SAM9X5: + at91_soc_initdata.type = AT91_SOC_SAM9X5; + at91_boot_soc = at91sam9x5_soc; + break; + } + + /* at91sam9g10 */ + if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { + at91_soc_initdata.type = AT91_SOC_SAM9G10; + at91_boot_soc = at91sam9261_soc; + } + /* at91sam9xe */ + else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) { + at91_soc_initdata.type = AT91_SOC_SAM9260; + at91_soc_initdata.subtype = AT91_SOC_SAM9XE; + at91_boot_soc = at91sam9260_soc; + } + + if (!at91_soc_is_detected()) + return; + + at91_soc_initdata.cidr = cidr; + + /* sub version of soc */ + at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID); + + if (at91_soc_initdata.type == AT91_SOC_SAM9G45) { + switch (at91_soc_initdata.exid) { + case ARCH_EXID_AT91SAM9M10: + at91_soc_initdata.subtype = AT91_SOC_SAM9M10; + break; + case ARCH_EXID_AT91SAM9G46: + at91_soc_initdata.subtype = AT91_SOC_SAM9G46; + break; + case ARCH_EXID_AT91SAM9M11: + at91_soc_initdata.subtype = AT91_SOC_SAM9M11; + break; + } + } + + if (at91_soc_initdata.type == AT91_SOC_SAM9X5) { + switch (at91_soc_initdata.exid) { + case ARCH_EXID_AT91SAM9G15: + at91_soc_initdata.subtype = AT91_SOC_SAM9G15; + break; + case ARCH_EXID_AT91SAM9G35: + at91_soc_initdata.subtype = AT91_SOC_SAM9G35; + break; + case ARCH_EXID_AT91SAM9X35: + at91_soc_initdata.subtype = AT91_SOC_SAM9X35; + break; + case ARCH_EXID_AT91SAM9G25: + at91_soc_initdata.subtype = AT91_SOC_SAM9G25; + break; + case ARCH_EXID_AT91SAM9X25: + at91_soc_initdata.subtype = AT91_SOC_SAM9X25; + break; + } + } +} + +static const char *soc_name[] = { + [AT91_SOC_RM9200] = "at91rm9200", + [AT91_SOC_CAP9] = "at91cap9", + [AT91_SOC_SAM9260] = "at91sam9260", + [AT91_SOC_SAM9261] = "at91sam9261", + [AT91_SOC_SAM9263] = "at91sam9263", + [AT91_SOC_SAM9G10] = "at91sam9g10", + [AT91_SOC_SAM9G20] = "at91sam9g20", + [AT91_SOC_SAM9G45] = "at91sam9g45", + [AT91_SOC_SAM9RL] = "at91sam9rl", + [AT91_SOC_SAM9X5] = "at91sam9x5", + [AT91_SOC_NONE] = "Unknown" +}; + +const char *at91_get_soc_type(struct at91_socinfo *c) +{ + return soc_name[c->type]; +} +EXPORT_SYMBOL(at91_get_soc_type); + +static const char *soc_subtype_name[] = { + [AT91_SOC_RM9200_BGA] = "at91rm9200 BGA", + [AT91_SOC_RM9200_PQFP] = "at91rm9200 PQFP", + [AT91_SOC_CAP9_REV_B] = "at91cap9 revB", + [AT91_SOC_CAP9_REV_C] = "at91cap9 revC", + [AT91_SOC_SAM9XE] = "at91sam9xe", + [AT91_SOC_SAM9G45ES] = "at91sam9g45es", + [AT91_SOC_SAM9M10] = "at91sam9m10", + [AT91_SOC_SAM9G46] = "at91sam9g46", + [AT91_SOC_SAM9M11] = "at91sam9m11", + [AT91_SOC_SAM9G15] = "at91sam9g15", + [AT91_SOC_SAM9G35] = "at91sam9g35", + [AT91_SOC_SAM9X35] = "at91sam9x35", + [AT91_SOC_SAM9G25] = "at91sam9g25", + [AT91_SOC_SAM9X25] = "at91sam9x25", + [AT91_SOC_SUBTYPE_NONE] = "Unknown" +}; + +const char *at91_get_soc_subtype(struct at91_socinfo *c) +{ + return soc_subtype_name[c->subtype]; +} +EXPORT_SYMBOL(at91_get_soc_subtype); + +void __init at91_map_io(void) +{ + /* Map peripherals */ + iotable_init(&at91_io_desc, 1); + + at91_soc_initdata.type = AT91_SOC_NONE; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; + + soc_detect(AT91_DBGU0); + if (!at91_soc_is_detected()) + soc_detect(AT91_DBGU1); + + if (!at91_soc_is_detected()) + panic("AT91: Impossible to detect the SOC type"); + + pr_info("AT91: Detected soc type: %s\n", + at91_get_soc_type(&at91_soc_initdata)); + pr_info("AT91: Detected soc subtype: %s\n", + at91_get_soc_subtype(&at91_soc_initdata)); + + if (!at91_soc_is_enabled()) + panic("AT91: Soc not enabled"); + + if (at91_boot_soc.map_io) + at91_boot_soc.map_io(); +} + +void __init at91_initialize(unsigned long main_clock) +{ + /* Init clock subsystem */ + at91_clock_init(main_clock); + + /* Register the processor-specific clocks */ + at91_boot_soc.register_clocks(); + + at91_boot_soc.init(); +} diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h new file mode 100644 index 000000000000..21ed8816e6f7 --- /dev/null +++ b/arch/arm/mach-at91/soc.h @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Under GPLv2 + */ + +struct at91_init_soc { + unsigned int *default_irq_priority; + void (*map_io)(void); + void (*register_clocks)(void); + void (*init)(void); +}; + +extern struct at91_init_soc at91_boot_soc; +extern struct at91_init_soc at91cap9_soc; +extern struct at91_init_soc at91rm9200_soc; +extern struct at91_init_soc at91sam9260_soc; +extern struct at91_init_soc at91sam9261_soc; +extern struct at91_init_soc at91sam9263_soc; +extern struct at91_init_soc at91sam9g45_soc; +extern struct at91_init_soc at91sam9rl_soc; +extern struct at91_init_soc at91sam9x5_soc; + +static inline int at91_soc_is_enabled(void) +{ + return at91_boot_soc.init != NULL; +} + +#if !defined(CONFIG_ARCH_AT91CAP9) +#define at91cap9_soc at91_boot_soc +#endif + +#if !defined(CONFIG_ARCH_AT91RM9200) +#define at91rm9200_soc at91_boot_soc +#endif + +#if !(defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)) +#define at91sam9260_soc at91_boot_soc +#endif + +#if !(defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10)) +#define at91sam9261_soc at91_boot_soc +#endif + +#if !defined(CONFIG_ARCH_AT91SAM9263) +#define at91sam9263_soc at91_boot_soc +#endif + +#if !defined(CONFIG_ARCH_AT91SAM9G45) +#define at91sam9g45_soc at91_boot_soc +#endif + +#if !defined(CONFIG_ARCH_AT91SAM9RL) +#define at91sam9rl_soc at91_boot_soc +#endif + +#if !defined(CONFIG_ARCH_AT91SAM9X5) +#define at91sam9x5_soc at91_boot_soc +#endif diff --git a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S index 6bd83ed90afe..d87bfc397d39 100644 --- a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S +++ b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S @@ -8,7 +8,6 @@ * published by the Free Software Foundation. */ -#include <mach/hardware.h> #include <asm/hardware/entry-macro-gic.S> .macro disable_fiq diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h index 58bb03ae3cf4..4f16c9b79f78 100644 --- a/arch/arm/mach-cns3xxx/include/mach/system.h +++ b/arch/arm/mach-cns3xxx/include/mach/system.h @@ -13,7 +13,6 @@ #include <linux/io.h> #include <asm/proc-fns.h> -#include <mach/hardware.h> static inline void arch_idle(void) { diff --git a/arch/arm/mach-cns3xxx/include/mach/uncompress.h b/arch/arm/mach-cns3xxx/include/mach/uncompress.h index de8ead9b91f7..a91b6058ab4f 100644 --- a/arch/arm/mach-cns3xxx/include/mach/uncompress.h +++ b/arch/arm/mach-cns3xxx/include/mach/uncompress.h @@ -8,7 +8,6 @@ */ #include <asm/mach-types.h> -#include <mach/hardware.h> #include <mach/cns3xxx.h> #define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index a4ec080908b8..0f8fca48a5ed 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -49,7 +49,7 @@ static struct cns3xxx_pcie *sysdata_to_cnspci(void *sysdata) return &cns3xxx_pcie[root->domain]; } -static struct cns3xxx_pcie *pdev_to_cnspci(struct pci_dev *dev) +static struct cns3xxx_pcie *pdev_to_cnspci(const struct pci_dev *dev) { return sysdata_to_cnspci(dev->sysdata); } @@ -172,7 +172,7 @@ static struct pci_bus *cns3xxx_pci_scan_bus(int nr, struct pci_sys_data *sys) return pci_scan_bus(sys->busnr, &cns3xxx_pcie_ops, sys); } -static int cns3xxx_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev); int irq = cnspci->irqs[slot]; diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index bd5394537c88..008d51407cd7 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -115,6 +115,32 @@ static struct spi_board_info da850evm_spi_info[] = { }, }; +#ifdef CONFIG_MTD +static void da850_evm_m25p80_notify_add(struct mtd_info *mtd) +{ + char *mac_addr = davinci_soc_info.emac_pdata->mac_addr; + size_t retlen; + + if (!strcmp(mtd->name, "MAC-Address")) { + mtd->read(mtd, 0, ETH_ALEN, &retlen, mac_addr); + if (retlen == ETH_ALEN) + pr_info("Read MAC addr from SPI Flash: %pM\n", + mac_addr); + } +} + +static struct mtd_notifier da850evm_spi_notifier = { + .add = da850_evm_m25p80_notify_add, +}; + +static void da850_evm_setup_mac_addr(void) +{ + register_mtd_user(&da850evm_spi_notifier); +} +#else +static void da850_evm_setup_mac_addr(void) { } +#endif + static struct mtd_partition da850_evm_norflash_partition[] = { { .name = "bootloaders + env", @@ -1244,6 +1270,8 @@ static __init void da850_evm_init(void) if (ret) pr_warning("da850_evm_init: sata registration failed: %d\n", ret); + + da850_evm_setup_mac_addr(); } #ifdef CONFIG_SERIAL_8250_CONSOLE diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 47fd0bc3d3e7..fa59c097223d 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -243,7 +243,7 @@ #define PSC_STATE_DISABLE 2 #define PSC_STATE_ENABLE 3 -#define MDSTAT_STATE_MASK 0x1f +#define MDSTAT_STATE_MASK 0x3f #define MDCTL_FORCE BIT(31) #ifndef __ASSEMBLER__ diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S index fb5e72b532b0..5f1e045a3ad1 100644 --- a/arch/arm/mach-davinci/sleep.S +++ b/arch/arm/mach-davinci/sleep.S @@ -217,7 +217,11 @@ ddr2clk_stop_done: ENDPROC(davinci_ddr_psc_config) CACHE_FLUSH: - .word arm926_flush_kern_cache_all +#ifdef CONFIG_CPU_V6 + .word v6_flush_kern_cache_all +#else + .word arm926_flush_kern_cache_all +#endif ENTRY(davinci_cpu_suspend_sz) .word . - davinci_cpu_suspend diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 83dce859886d..a9e0dae86a26 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -158,7 +158,7 @@ void __init dove_spi0_init(void) void __init dove_spi1_init(void) { - orion_spi_init(DOVE_SPI1_PHYS_BASE, get_tclk()); + orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk()); } /***************************************************************************** diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c index c2f1c4767f21..aa2b3a09a51d 100644 --- a/arch/arm/mach-dove/pcie.c +++ b/arch/arm/mach-dove/pcie.c @@ -193,7 +193,7 @@ dove_pcie_scan_bus(int nr, struct pci_sys_data *sys) return bus; } -static int __init dove_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init dove_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { struct pcie_port *pp = bus_to_port(dev->bus->number); diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h index 0eabec62cd9d..f1397a13e76b 100644 --- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h +++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h @@ -6,7 +6,7 @@ * TS72xx memory map: * * virt phys size - * febff000 22000000 4K model number register + * febff000 22000000 4K model number register (bits 0-2) * febfe000 22400000 4K options register * febfd000 22800000 4K options register #2 * febf9000 10800000 4K TS-5620 RTC index register @@ -20,6 +20,9 @@ #define TS72XX_MODEL_TS7200 0x00 #define TS72XX_MODEL_TS7250 0x01 #define TS72XX_MODEL_TS7260 0x02 +#define TS72XX_MODEL_TS7300 0x03 +#define TS72XX_MODEL_TS7400 0x04 +#define TS72XX_MODEL_MASK 0x07 #define TS72XX_OPTIONS_PHYS_BASE 0x22400000 @@ -51,19 +54,34 @@ #ifndef __ASSEMBLY__ +static inline int ts72xx_model(void) +{ + return __raw_readb(TS72XX_MODEL_VIRT_BASE) & TS72XX_MODEL_MASK; +} + static inline int board_is_ts7200(void) { - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200; + return ts72xx_model() == TS72XX_MODEL_TS7200; } static inline int board_is_ts7250(void) { - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250; + return ts72xx_model() == TS72XX_MODEL_TS7250; } static inline int board_is_ts7260(void) { - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260; + return ts72xx_model() == TS72XX_MODEL_TS7260; +} + +static inline int board_is_ts7300(void) +{ + return ts72xx_model() == TS72XX_MODEL_TS7300; +} + +static inline int board_is_ts7400(void) +{ + return ts72xx_model() == TS72XX_MODEL_TS7400; } static inline int is_max197_installed(void) diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c index 851dea018578..86964d2e9e1b 100644 --- a/arch/arm/mach-exynos4/clock.c +++ b/arch/arm/mach-exynos4/clock.c @@ -520,7 +520,7 @@ static struct clk init_clocks_off[] = { .ctrlbit = (1 << 21), }, { .name = "ac97", - .id = -1, + .devname = "samsung-ac97", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 27), }, { @@ -899,8 +899,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "exynos4-fimc.0", + .name = "sclk_cam0", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 16), }, @@ -909,8 +908,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "exynos4-fimc.1", + .name = "sclk_cam1", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 20), }, @@ -1160,7 +1158,7 @@ void __init_or_cpufreq exynos4_setup_clocks(void) vpllsrc = clk_get_rate(&clk_vpllsrc.clk); vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), - __raw_readl(S5P_VPLL_CON1), pll_4650); + __raw_readl(S5P_VPLL_CON1), pll_4650c); clk_fout_apll.ops = &exynos4_fout_apll_ops; clk_fout_mpll.rate = mpll; diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c index 2d8a40c9e6e5..746d6fc6d397 100644 --- a/arch/arm/mach-exynos4/cpu.c +++ b/arch/arm/mach-exynos4/cpu.c @@ -24,12 +24,13 @@ #include <plat/exynos4.h> #include <plat/adc-core.h> #include <plat/sdhci.h> -#include <plat/devs.h> #include <plat/fb-core.h> #include <plat/fimc-core.h> #include <plat/iic-core.h> +#include <plat/reset.h> #include <mach/regs-irq.h> +#include <mach/regs-pmu.h> extern int combiner_init(unsigned int combiner_nr, void __iomem *base, unsigned int irq_start); @@ -128,6 +129,11 @@ static void exynos4_idle(void) local_irq_enable(); } +static void exynos4_sw_reset(void) +{ + __raw_writel(0x1, S5P_SWRESET); +} + /* * exynos4_map_io * @@ -241,5 +247,8 @@ int __init exynos4_init(void) /* set idle function */ pm_idle = exynos4_idle; + /* set sw_reset function */ + s5p_reset_hook = exynos4_sw_reset; + return sysdev_register(&exynos4_sysdev); } diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h index 934d2a493982..f8952f8f3757 100644 --- a/arch/arm/mach-exynos4/include/mach/irqs.h +++ b/arch/arm/mach-exynos4/include/mach/irqs.h @@ -80,9 +80,8 @@ #define IRQ_HSMMC3 IRQ_SPI(76) #define IRQ_DWMCI IRQ_SPI(77) -#define IRQ_MIPICSI0 IRQ_SPI(78) - -#define IRQ_MIPICSI1 IRQ_SPI(80) +#define IRQ_MIPI_CSIS0 IRQ_SPI(78) +#define IRQ_MIPI_CSIS1 IRQ_SPI(80) #define IRQ_ONENAND_AUDI IRQ_SPI(82) #define IRQ_ROTATOR IRQ_SPI(83) diff --git a/arch/arm/mach-exynos4/include/mach/regs-pmu.h b/arch/arm/mach-exynos4/include/mach/regs-pmu.h index fa49bbb8e7b0..cdf9b47c303c 100644 --- a/arch/arm/mach-exynos4/include/mach/regs-pmu.h +++ b/arch/arm/mach-exynos4/include/mach/regs-pmu.h @@ -29,6 +29,8 @@ #define S5P_USE_STANDBY_WFE1 (1 << 25) #define S5P_USE_MASK ((0x3 << 16) | (0x3 << 24)) +#define S5P_SWRESET S5P_PMUREG(0x0400) + #define S5P_WAKEUP_STAT S5P_PMUREG(0x0600) #define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604) #define S5P_WAKEUP_MASK S5P_PMUREG(0x0608) diff --git a/arch/arm/mach-exynos4/irq-eint.c b/arch/arm/mach-exynos4/irq-eint.c index 9d87d2ac7f68..badb8c66fc9b 100644 --- a/arch/arm/mach-exynos4/irq-eint.c +++ b/arch/arm/mach-exynos4/irq-eint.c @@ -23,6 +23,8 @@ #include <mach/regs-gpio.h> +#include <asm/mach/irq.h> + static DEFINE_SPINLOCK(eint_lock); static unsigned int eint0_15_data[16]; @@ -184,8 +186,11 @@ static inline void exynos4_irq_demux_eint(unsigned int start) static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) { + struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); exynos4_irq_demux_eint(IRQ_EINT(16)); exynos4_irq_demux_eint(IRQ_EINT(24)); + chained_irq_exit(chip, desc); } static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) @@ -193,6 +198,7 @@ static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) u32 *irq_data = irq_get_handler_data(irq); struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); chip->irq_mask(&desc->irq_data); if (chip->irq_ack) @@ -201,6 +207,7 @@ static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) generic_handle_irq(*irq_data); chip->irq_unmask(&desc->irq_data); + chained_irq_exit(chip, desc); } int __init exynos4_init_irq_eint(void) diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c index 0e280d12301e..b3b5d8911004 100644 --- a/arch/arm/mach-exynos4/mach-universal_c210.c +++ b/arch/arm/mach-exynos4/mach-universal_c210.c @@ -79,7 +79,7 @@ static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = { }; static struct regulator_consumer_supply max8952_consumer = - REGULATOR_SUPPLY("vddarm", NULL); + REGULATOR_SUPPLY("vdd_arm", NULL); static struct max8952_platform_data universal_max8952_pdata __initdata = { .gpio_vid0 = EXYNOS4_GPX0(3), @@ -105,7 +105,7 @@ static struct max8952_platform_data universal_max8952_pdata __initdata = { }; static struct regulator_consumer_supply lp3974_buck1_consumer = - REGULATOR_SUPPLY("vddint", NULL); + REGULATOR_SUPPLY("vdd_int", NULL); static struct regulator_consumer_supply lp3974_buck2_consumer = REGULATOR_SUPPLY("vddg3d", NULL); diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c index 1ae059b7ad7b..ddd86864fb83 100644 --- a/arch/arm/mach-exynos4/mct.c +++ b/arch/arm/mach-exynos4/mct.c @@ -132,12 +132,18 @@ static cycle_t exynos4_frc_read(struct clocksource *cs) return ((cycle_t)hi << 32) | lo; } +static void exynos4_frc_resume(struct clocksource *cs) +{ + exynos4_mct_frc_start(0, 0); +} + struct clocksource mct_frc = { .name = "mct-frc", .rating = 400, .read = exynos4_frc_read, .mask = CLOCKSOURCE_MASK(64), .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .resume = exynos4_frc_resume, }; static void __init exynos4_clocksource_init(void) @@ -389,9 +395,11 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt) } /* Setup the local clock events for a CPU */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { exynos4_mct_tick_init(evt); + + return 0; } int local_timer_ack(void) diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c index 7c2282c6ba81..df6ef1b2f98b 100644 --- a/arch/arm/mach-exynos4/platsmp.c +++ b/arch/arm/mach-exynos4/platsmp.c @@ -106,6 +106,8 @@ void __cpuinit platform_secondary_init(unsigned int cpu) */ spin_lock(&boot_lock); spin_unlock(&boot_lock); + + set_cpu_online(cpu, true); } int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) diff --git a/arch/arm/mach-exynos4/setup-keypad.c b/arch/arm/mach-exynos4/setup-keypad.c index 1ee0ebff111f..7862bfb5933d 100644 --- a/arch/arm/mach-exynos4/setup-keypad.c +++ b/arch/arm/mach-exynos4/setup-keypad.c @@ -19,15 +19,16 @@ void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols) if (rows > 8) { /* Set all the necessary GPX2 pins: KP_ROW[0~7] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3), + S3C_GPIO_PULL_UP); /* Set all the necessary GPX3 pins: KP_ROW[8~] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX3(0), (rows - 8), - S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX3(0), (rows - 8), + S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); } else { /* Set all the necessary GPX2 pins: KP_ROW[x] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), rows, - S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), rows, S3C_GPIO_SFN(3), + S3C_GPIO_PULL_UP); } /* Set all the necessary GPX1 pins to special-function 3: KP_COL[x] */ diff --git a/arch/arm/mach-exynos4/setup-usb-phy.c b/arch/arm/mach-exynos4/setup-usb-phy.c index 0883c1b824b9..39aca045f660 100644 --- a/arch/arm/mach-exynos4/setup-usb-phy.c +++ b/arch/arm/mach-exynos4/setup-usb-phy.c @@ -82,7 +82,7 @@ static int exynos4_usb_phy1_init(struct platform_device *pdev) rstcon &= ~(HOST_LINK_PORT_SWRST_MASK | PHY1_SWRST_MASK); writel(rstcon, EXYNOS4_RSTCON); - udelay(50); + udelay(80); clk_disable(otg_clk); clk_put(otg_clk); diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index dc26fff22cf0..c8e7afcf14ec 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -62,6 +62,7 @@ config ARCH_EBSA285_HOST config ARCH_NETWINDER bool "NetWinder" select CLKSRC_I8253 + select CLKEVT_I8253 select FOOTBRIDGE_HOST select ISA select ISA_DMA diff --git a/arch/arm/mach-footbridge/cats-pci.c b/arch/arm/mach-footbridge/cats-pci.c index ae3e1c8c7583..32321f66dec4 100644 --- a/arch/arm/mach-footbridge/cats-pci.c +++ b/arch/arm/mach-footbridge/cats-pci.c @@ -16,7 +16,7 @@ /* cats host-specific stuff */ static int irqmap_cats[] __initdata = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 }; -static int __init cats_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (dev->irq >= 255) return -1; /* not a valid interrupt. */ diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index 1331fff51ae2..18c32a5541d9 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -18,6 +18,7 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/spinlock.h> +#include <video/vga.h> #include <asm/irq.h> #include <asm/system.h> diff --git a/arch/arm/mach-footbridge/ebsa285-pci.c b/arch/arm/mach-footbridge/ebsa285-pci.c index e5ab5bddbc8c..511c673ffa9d 100644 --- a/arch/arm/mach-footbridge/ebsa285-pci.c +++ b/arch/arm/mach-footbridge/ebsa285-pci.c @@ -15,7 +15,7 @@ static int irqmap_ebsa285[] __initdata = { IRQ_IN3, IRQ_IN1, IRQ_IN0, IRQ_PCI }; -static int __init ebsa285_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init ebsa285_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (dev->vendor == PCI_VENDOR_ID_CONTAQ && dev->device == PCI_DEVICE_ID_CONTAQ_82C693) diff --git a/arch/arm/mach-footbridge/netwinder-pci.c b/arch/arm/mach-footbridge/netwinder-pci.c index e263d6d54a0f..62187610e17e 100644 --- a/arch/arm/mach-footbridge/netwinder-pci.c +++ b/arch/arm/mach-footbridge/netwinder-pci.c @@ -17,7 +17,7 @@ * We now use the slot ID instead of the device identifiers to select * which interrupt is routed where. */ -static int __init netwinder_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init netwinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { switch (slot) { case 0: /* host bridge */ diff --git a/arch/arm/mach-footbridge/personal-pci.c b/arch/arm/mach-footbridge/personal-pci.c index d5fca95afdad..aeb651d914a6 100644 --- a/arch/arm/mach-footbridge/personal-pci.c +++ b/arch/arm/mach-footbridge/personal-pci.c @@ -18,7 +18,8 @@ static int irqmap_personal_server[] __initdata = { IRQ_DOORBELLHOST, IRQ_DMA1, IRQ_DMA2, IRQ_PCI }; -static int __init personal_server_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init personal_server_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { unsigned char line; diff --git a/arch/arm/mach-imx/clock-imx1.c b/arch/arm/mach-imx/clock-imx1.c index dcc41728fe72..4aabeb241563 100644 --- a/arch/arm/mach-imx/clock-imx1.c +++ b/arch/arm/mach-imx/clock-imx1.c @@ -587,9 +587,9 @@ static struct clk_lookup lookups[] __initdata = { _REGISTER_CLOCK(NULL, "mma", mma_clk) _REGISTER_CLOCK("imx_udc.0", NULL, usbd_clk) _REGISTER_CLOCK(NULL, "gpt", gpt_clk) - _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk) - _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk) - _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk) + _REGISTER_CLOCK("imx1-uart.0", NULL, uart_clk) + _REGISTER_CLOCK("imx1-uart.1", NULL, uart_clk) + _REGISTER_CLOCK("imx1-uart.2", NULL, uart_clk) _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk) _REGISTER_CLOCK("imx1-cspi.0", NULL, spi_clk) _REGISTER_CLOCK("imx1-cspi.1", NULL, spi_clk) diff --git a/arch/arm/mach-imx/clock-imx21.c b/arch/arm/mach-imx/clock-imx21.c index bf30a8c7ce6f..ee15d8c9db08 100644 --- a/arch/arm/mach-imx/clock-imx21.c +++ b/arch/arm/mach-imx/clock-imx21.c @@ -1162,10 +1162,10 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "perclk3", per_clk[2]) _REGISTER_CLOCK(NULL, "perclk4", per_clk[3]) _REGISTER_CLOCK(NULL, "clko", clko_clk) - _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0]) - _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1]) - _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2]) - _REGISTER_CLOCK("imx-uart.3", NULL, uart_clk[3]) + _REGISTER_CLOCK("imx21-uart.0", NULL, uart_clk[0]) + _REGISTER_CLOCK("imx21-uart.1", NULL, uart_clk[1]) + _REGISTER_CLOCK("imx21-uart.2", NULL, uart_clk[2]) + _REGISTER_CLOCK("imx21-uart.3", NULL, uart_clk[3]) _REGISTER_CLOCK(NULL, "gpt1", gpt_clk[0]) _REGISTER_CLOCK(NULL, "gpt1", gpt_clk[1]) _REGISTER_CLOCK(NULL, "gpt1", gpt_clk[2]) diff --git a/arch/arm/mach-imx/clock-imx25.c b/arch/arm/mach-imx/clock-imx25.c index af1c580b06bc..e63e23504fe5 100644 --- a/arch/arm/mach-imx/clock-imx25.c +++ b/arch/arm/mach-imx/clock-imx25.c @@ -272,11 +272,12 @@ DEFINE_CLOCK(can2_clk, 1, CCM_CGCR1, 3, get_rate_ipg, NULL, NULL); }, static struct clk_lookup lookups[] = { - _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) - _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) - _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) - _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk) - _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk) + /* i.mx25 has the i.mx21 type uart */ + _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk) + _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk) + _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk) + _REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk) + _REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk) _REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk) _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk) _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk) @@ -295,19 +296,20 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk) _REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk) _REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk) - _REGISTER_CLOCK("fec.0", NULL, fec_clk) + _REGISTER_CLOCK("imx25-fec.0", NULL, fec_clk) _REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk) _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) _REGISTER_CLOCK("imx2-wdt.0", NULL, wdt_clk) _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx25.0", NULL, esdhc1_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx25.1", NULL, esdhc2_clk) _REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk) _REGISTER_CLOCK(NULL, "audmux", audmux_clk) _REGISTER_CLOCK("flexcan.0", NULL, can1_clk) _REGISTER_CLOCK("flexcan.1", NULL, can2_clk) - _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk) + /* i.mx25 has the i.mx35 type sdma */ + _REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk) }; int __init mx25_clocks_init(void) @@ -329,6 +331,9 @@ int __init mx25_clocks_init(void) __raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7) | (1 << 0), CRM_BASE + 0x64); + /* Clock source for gpt is ahb_div */ + __raw_writel(__raw_readl(CRM_BASE+0x64) & ~(1 << 5), CRM_BASE + 0x64); + mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); return 0; diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c index 583f2515c1d5..6912b821b37b 100644 --- a/arch/arm/mach-imx/clock-imx27.c +++ b/arch/arm/mach-imx/clock-imx27.c @@ -624,12 +624,13 @@ DEFINE_CLOCK1(csi_clk, 0, NULL, 0, parent, &csi_clk1, &per4_clk); }, static struct clk_lookup lookups[] = { - _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) - _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) - _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) - _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk) - _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk) - _REGISTER_CLOCK("imx-uart.5", NULL, uart6_clk) + /* i.mx27 has the i.mx21 type uart */ + _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk) + _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk) + _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk) + _REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk) + _REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk) + _REGISTER_CLOCK("imx21-uart.5", NULL, uart6_clk) _REGISTER_CLOCK(NULL, "gpt1", gpt1_clk) _REGISTER_CLOCK(NULL, "gpt2", gpt2_clk) _REGISTER_CLOCK(NULL, "gpt3", gpt3_clk) @@ -662,7 +663,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "brom", brom_clk) _REGISTER_CLOCK(NULL, "emma", emma_clk) _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk) - _REGISTER_CLOCK("fec.0", NULL, fec_clk) + _REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk) _REGISTER_CLOCK(NULL, "emi", emi_clk) _REGISTER_CLOCK(NULL, "sahara2", sahara2_clk) _REGISTER_CLOCK(NULL, "ata", ata_clk) diff --git a/arch/arm/mach-imx/clock-imx31.c b/arch/arm/mach-imx/clock-imx31.c index 25f343fca2b9..d973770b1f96 100644 --- a/arch/arm/mach-imx/clock-imx31.c +++ b/arch/arm/mach-imx/clock-imx31.c @@ -547,11 +547,12 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1) _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2) _REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk) - _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) - _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) - _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) - _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk) - _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk) + /* i.mx31 has the i.mx21 type uart */ + _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk) + _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk) + _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk) + _REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk) + _REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk) _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk) _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk) _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk) @@ -564,7 +565,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "ata", ata_clk) _REGISTER_CLOCK(NULL, "rtic", rtic_clk) _REGISTER_CLOCK(NULL, "rng", rng_clk) - _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk1) + _REGISTER_CLOCK("imx31-sdma", NULL, sdma_clk1) _REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2) _REGISTER_CLOCK(NULL, "mstick", mstick1_clk) _REGISTER_CLOCK(NULL, "mstick", mstick2_clk) diff --git a/arch/arm/mach-imx/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c index 5a4cc1ea405b..88b62a071aea 100644 --- a/arch/arm/mach-imx/clock-imx35.c +++ b/arch/arm/mach-imx/clock-imx35.c @@ -458,10 +458,11 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx-epit.0", NULL, epit1_clk) _REGISTER_CLOCK("imx-epit.1", NULL, epit2_clk) _REGISTER_CLOCK(NULL, "esai", esai_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_clk) - _REGISTER_CLOCK("fec.0", NULL, fec_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx35.0", NULL, esdhc1_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx35.1", NULL, esdhc2_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx35.2", NULL, esdhc3_clk) + /* i.mx35 has the i.mx27 type fec */ + _REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk) _REGISTER_CLOCK(NULL, "gpio", gpio1_clk) _REGISTER_CLOCK(NULL, "gpio", gpio2_clk) _REGISTER_CLOCK(NULL, "gpio", gpio3_clk) @@ -481,14 +482,15 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "rtc", rtc_clk) _REGISTER_CLOCK(NULL, "rtic", rtic_clk) _REGISTER_CLOCK(NULL, "scc", scc_clk) - _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk) + _REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk) _REGISTER_CLOCK(NULL, "spba", spba_clk) _REGISTER_CLOCK(NULL, "spdif", spdif_clk) _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) - _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) - _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) - _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) + /* i.mx35 has the i.mx21 type uart */ + _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk) + _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk) + _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk) _REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk) _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk) _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk) diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c index 01ebcb31e482..66e8726253fa 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c @@ -225,7 +225,8 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = { static struct esdhc_platform_data sd1_pdata = { .cd_gpio = GPIO_SD1CD, - .wp_gpio = -EINVAL, + .cd_type = ESDHC_CD_GPIO, + .wp_type = ESDHC_WP_NONE, }; /* diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c index 558eb526ba56..0f0af02b3182 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c @@ -236,7 +236,8 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = { static struct esdhc_platform_data sd1_pdata = { .cd_gpio = GPIO_SD1CD, - .wp_gpio = -EINVAL, + .cd_type = ESDHC_CD_GPIO, + .wp_type = ESDHC_WP_NONE, }; /* diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 87887ac5806b..f851fe903687 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -310,7 +310,7 @@ static struct sys_timer eukrea_cpuimx27_timer = { .init = eukrea_cpuimx27_timer_init, }; -MACHINE_START(CPUIMX27, "EUKREA CPUIMX27") +MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27") .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index f39a478ba1a6..4bd083ba9af2 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -192,7 +192,7 @@ struct sys_timer eukrea_cpuimx35_timer = { .init = eukrea_cpuimx35_timer_init, }; -MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35") +MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35") /* Maintainer: Eukrea Electromatique */ .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx35_map_io, diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index da36da52969d..2442d5da883d 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -161,7 +161,7 @@ static struct sys_timer eukrea_cpuimx25_timer = { .init = eukrea_cpuimx25_timer_init, }; -MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25") +MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25") /* Maintainer: Eukrea Electromatique */ .boot_params = MX25_PHYS_OFFSET + 0x100, .map_io = mx25_map_io, diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 6707de0ab716..6778f8193bc6 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -30,6 +30,7 @@ #include <linux/input.h> #include <linux/gpio.h> #include <linux/delay.h> +#include <sound/tlv320aic32x4.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> @@ -196,6 +197,17 @@ static struct pca953x_platform_data visstrim_m10_pca9555_pdata = { .invert = 0, }; +static struct aic32x4_pdata visstrim_m10_aic32x4_pdata = { + .power_cfg = AIC32X4_PWR_MICBIAS_2075_LDOIN | + AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE | + AIC32X4_PWR_AIC32X4_LDO_ENABLE | + AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36 | + AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED, + .micpga_routing = AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K | + AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K, + .swapdacs = false, +}; + static struct i2c_board_info visstrim_m10_i2c_devices[] = { { I2C_BOARD_INFO("pca9555", 0x20), @@ -203,6 +215,7 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = { }, { I2C_BOARD_INFO("tlv320aic32x4", 0x18), + .platform_data = &visstrim_m10_aic32x4_pdata, } }; diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index 01534bb61305..7f66a91df361 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -215,6 +215,8 @@ static const struct imxi2c_platform_data mx25_3ds_i2c0_data __initconst = { static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = { .wp_gpio = SD1_GPIO_WP, .cd_gpio = SD1_GPIO_CD, + .wp_type = ESDHC_WP_GPIO, + .cd_type = ESDHC_CD_GPIO, }; static void __init mx25pdk_init(void) diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index 0ce49478a479..29ca8907a780 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -468,7 +468,7 @@ static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = { #endif }; -static void mxc_init_i2c(void) +static void __init mxc_init_i2c(void) { i2c_register_board_info(1, mx31ads_i2c1_devices, ARRAY_SIZE(mx31ads_i2c1_devices)); @@ -486,7 +486,7 @@ static unsigned int ssi_pins[] = { MX31_PIN_STXD5__STXD5, }; -static void mxc_init_audio(void) +static void __init mxc_init_audio(void) { imx31_add_imx_ssi(0, NULL); mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi"); diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 750368ddf0f9..126913ad106a 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -192,7 +192,7 @@ static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, }; -static void lilly1131_usb_init(void) +static void __init lilly1131_usb_init(void) { imx31_add_mxc_ehci_hs(1, &usbh1_pdata); diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index 163cc318cafb..660ec3e80cf8 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -349,6 +349,8 @@ __setup("otg_mode=", pcm043_otg_mode); static struct esdhc_platform_data sd1_pdata = { .wp_gpio = SD1_GPIO_WP, .cd_gpio = SD1_GPIO_CD, + .wp_type = ESDHC_WP_GPIO, + .cd_type = ESDHC_CD_GPIO, }; /* diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c index 8bf029164652..cc4d152bd9bd 100644 --- a/arch/arm/mach-imx/mm-imx25.c +++ b/arch/arm/mach-imx/mm-imx25.c @@ -79,7 +79,6 @@ static struct sdma_script_start_addrs imx25_sdma_script __initdata = { }; static struct sdma_platform_data imx25_sdma_pdata __initdata = { - .sdma_version = 2, .fw_name = "sdma-imx25.bin", .script_addrs = &imx25_sdma_script, }; @@ -92,5 +91,6 @@ void __init imx25_soc_init(void) mxc_register_gpio("imx31-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0); mxc_register_gpio("imx31-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0); - imx_add_imx_sdma(MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata); + /* i.mx25 has the i.mx35 type sdma */ + imx_add_imx_sdma("imx35-sdma", MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata); } diff --git a/arch/arm/mach-imx/mm-imx31.c b/arch/arm/mach-imx/mm-imx31.c index 61bff38cb955..b7c55e7db000 100644 --- a/arch/arm/mach-imx/mm-imx31.c +++ b/arch/arm/mach-imx/mm-imx31.c @@ -69,7 +69,6 @@ static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = { }; static struct sdma_platform_data imx31_sdma_pdata __initdata = { - .sdma_version = 1, .fw_name = "sdma-imx31-to2.bin", .script_addrs = &imx31_to2_sdma_script, }; @@ -88,5 +87,5 @@ void __init imx31_soc_init(void) imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script; } - imx_add_imx_sdma(MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata); + imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata); } diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c index 98769ae34377..f49bac7a1ede 100644 --- a/arch/arm/mach-imx/mm-imx35.c +++ b/arch/arm/mach-imx/mm-imx35.c @@ -86,7 +86,6 @@ static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = { }; static struct sdma_platform_data imx35_sdma_pdata __initdata = { - .sdma_version = 2, .fw_name = "sdma-imx35-to2.bin", .script_addrs = &imx35_to2_sdma_script, }; @@ -106,5 +105,5 @@ void __init imx35_soc_init(void) imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script; } - imx_add_imx_sdma(MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata); + imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata); } diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 2fbbdd5eac35..8cdc730dcb3a 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -32,6 +32,7 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/mtd/physmap.h> +#include <video/vga.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -154,6 +155,7 @@ static struct map_desc ap_io_desc[] __initdata = { static void __init ap_map_io(void) { iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc)); + vga_base = PCI_MEMORY_VADDR; } #define INTEGRATOR_SC_VALID_INT 0x003fffff @@ -337,15 +339,15 @@ static unsigned long timer_reload; static void integrator_clocksource_init(u32 khz) { void __iomem *base = (void __iomem *)TIMER2_VA_BASE; - u32 ctrl = TIMER_CTRL_ENABLE; + u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC; if (khz >= 1500) { khz /= 16; - ctrl = TIMER_CTRL_DIV16; + ctrl |= TIMER_CTRL_DIV16; } - writel(ctrl, base + TIMER_CTRL); writel(0xffff, base + TIMER_LOAD); + writel(ctrl, base + TIMER_CTRL); clocksource_mmio_init(base + TIMER_VALUE, "timer2", khz * 1000, 200, 16, clocksource_mmio_readl_down); diff --git a/arch/arm/mach-integrator/pci.c b/arch/arm/mach-integrator/pci.c index 2fdb95433f0a..520b6bf81bb1 100644 --- a/arch/arm/mach-integrator/pci.c +++ b/arch/arm/mach-integrator/pci.c @@ -95,7 +95,7 @@ static int irq_tab[4] __initdata = { * map the specified device/slot/pin to an IRQ. This works out such * that slot 9 pin 1 is INT0, pin 2 is INT1, and slot 10 pin 1 is INT1. */ -static int __init integrator_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init integrator_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int intnr = ((slot - 9) + (pin - 1)) & 3; diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index dd56bfb351e3..11b86e5b71c2 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -27,7 +27,6 @@ #include <linux/spinlock.h> #include <linux/init.h> #include <linux/io.h> -#include <video/vga.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -505,7 +504,6 @@ void __init pci_v3_preinit(void) pcibios_min_io = 0x6000; pcibios_min_mem = 0x00100000; - vga_base = PCI_MEMORY_VADDR; /* * Hook in our fault handler for PCI errors diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c index 9b5a63f5d07d..23dfaffc586c 100644 --- a/arch/arm/mach-iop13xx/iq81340mc.c +++ b/arch/arm/mach-iop13xx/iq81340mc.c @@ -30,7 +30,7 @@ extern int init_atu; /* Flag to select which ATU(s) to initialize / disable */ static int __init -iq81340mc_pcix_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) +iq81340mc_pcix_map_irq(const struct pci_dev *dev, u8 idsel, u8 pin) { switch (idsel) { case 1: diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index 0690b1d7fd3e..251c40897dad 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -388,7 +388,7 @@ static int iop13xx_atue_pci_status(int clear) } static int -iop13xx_pcie_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) +iop13xx_pcie_map_irq(const struct pci_dev *dev, u8 idsel, u8 pin) { WARN_ON(idsel != 0); diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c index 779f924af302..6cbffbfc2bba 100644 --- a/arch/arm/mach-iop32x/em7210.c +++ b/arch/arm/mach-iop32x/em7210.c @@ -81,7 +81,7 @@ void __init em7210_map_io(void) #define INTD IRQ_IOP32X_XINT3 static int __init -em7210_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +em7210_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { static int pci_irq_table[][4] = { /* diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c index c6b6f9c5650d..ceef5d4dce1a 100644 --- a/arch/arm/mach-iop32x/glantank.c +++ b/arch/arm/mach-iop32x/glantank.c @@ -77,7 +77,7 @@ void __init glantank_map_io(void) #define INTD IRQ_IOP32X_XINT3 static int __init -glantank_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +glantank_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { static int pci_irq_table[][4] = { /* diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c index fde962c057f0..3a62514dae7c 100644 --- a/arch/arm/mach-iop32x/iq31244.c +++ b/arch/arm/mach-iop32x/iq31244.c @@ -103,7 +103,7 @@ void __init iq31244_map_io(void) * EP80219/IQ31244 PCI. */ static int __init -ep80219_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +ep80219_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; @@ -139,7 +139,7 @@ static struct hw_pci ep80219_pci __initdata = { }; static int __init -iq31244_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +iq31244_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c index 3a95950e8737..35b7e6914d3b 100644 --- a/arch/arm/mach-iop32x/iq80321.c +++ b/arch/arm/mach-iop32x/iq80321.c @@ -71,7 +71,7 @@ void __init iq80321_map_io(void) * IQ80321 PCI. */ static int __init -iq80321_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +iq80321_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c index 626aa375915d..1a374eab6007 100644 --- a/arch/arm/mach-iop32x/n2100.c +++ b/arch/arm/mach-iop32x/n2100.c @@ -78,7 +78,7 @@ void __init n2100_map_io(void) * N2100 PCI. */ static int __init -n2100_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +n2100_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c index c565f8d1e3a4..637c0272d5e0 100644 --- a/arch/arm/mach-iop33x/iq80331.c +++ b/arch/arm/mach-iop33x/iq80331.c @@ -54,7 +54,7 @@ static struct sys_timer iq80331_timer = { * IQ80331 PCI. */ static int __init -iq80331_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +iq80331_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c index 36a9efb254c2..90a0436d7255 100644 --- a/arch/arm/mach-iop33x/iq80332.c +++ b/arch/arm/mach-iop33x/iq80332.c @@ -54,7 +54,7 @@ static struct sys_timer iq80332_timer = { * IQ80332 PCI. */ static int __init -iq80332_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +iq80332_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index 88663ab1d2ad..62c60ade5274 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -148,7 +148,8 @@ static struct pci_bus * __init enp2611_pci_scan_bus(int nr, return pci_scan_bus(sys->busnr, &enp2611_pci_ops, sys); } -static int __init enp2611_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init enp2611_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { int irq; diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c index dfffc1e817fa..5bad1a8419b7 100644 --- a/arch/arm/mach-ixp2000/ixdp2400.c +++ b/arch/arm/mach-ixp2000/ixdp2400.c @@ -78,7 +78,8 @@ int ixdp2400_pci_setup(int nr, struct pci_sys_data *sys) return 1; } -static int __init ixdp2400_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init ixdp2400_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { if (ixdp2x00_master_npu()) { diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c index cd4c9bcff2b5..3d3cef876467 100644 --- a/arch/arm/mach-ixp2000/ixdp2800.c +++ b/arch/arm/mach-ixp2000/ixdp2800.c @@ -161,7 +161,8 @@ static int __init ixdp2800_pci_setup(int nr, struct pci_sys_data *sys) return 1; } -static int __init ixdp2800_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init ixdp2800_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { if (ixdp2x00_master_npu()) { diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index 84835b209557..be2a254f1374 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -252,7 +252,8 @@ void __init ixdp2x01_pci_preinit(void) #define DEVPIN(dev, pin) ((pin) | ((dev) << 3)) -static int __init ixdp2x01_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init ixdp2x01_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { u8 bus = dev->bus->number; u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin); diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c index 8dcba17c81e7..ec028e35f401 100644 --- a/arch/arm/mach-ixp23xx/ixdp2351.c +++ b/arch/arm/mach-ixp23xx/ixdp2351.c @@ -168,7 +168,7 @@ void __init ixdp2351_init_irq(void) */ #define DEVPIN(dev, pin) ((pin) | ((dev) << 3)) -static int __init ixdp2351_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init ixdp2351_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { u8 bus = dev->bus->number; u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin); diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c index 8fe0c6273262..844551d2368b 100644 --- a/arch/arm/mach-ixp23xx/roadrunner.c +++ b/arch/arm/mach-ixp23xx/roadrunner.c @@ -56,7 +56,8 @@ #define INTC_PIN IXP23XX_GPIO_PIN_11 #define INTD_PIN IXP23XX_GPIO_PIN_12 -static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) +static int __init roadrunner_map_irq(const struct pci_dev *dev, u8 idsel, + u8 pin) { static int pci_card_slot_irq[] = {INTB, INTC, INTD, INTA}; static int pmc_card_slot_irq[] = {INTA, INTB, INTC, INTD}; diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c index 162043ff29ff..8fea0a3c5246 100644 --- a/arch/arm/mach-ixp4xx/avila-pci.c +++ b/arch/arm/mach-ixp4xx/avila-pci.c @@ -46,7 +46,7 @@ void __init avila_pci_preinit(void) ixp4xx_pci_preinit(); } -static int __init avila_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init avila_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { static int pci_irq_table[IRQ_LINES] = { IXP4XX_GPIO_IRQ(INTA), diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c index 37fda7d6e83d..71f5c9c60fc3 100644 --- a/arch/arm/mach-ixp4xx/coyote-pci.c +++ b/arch/arm/mach-ixp4xx/coyote-pci.c @@ -37,7 +37,7 @@ void __init coyote_pci_preinit(void) ixp4xx_pci_preinit(); } -static int __init coyote_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init coyote_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (slot == SLOT0_DEVID) return IXP4XX_GPIO_IRQ(SLOT0_INTA); diff --git a/arch/arm/mach-ixp4xx/dsmg600-pci.c b/arch/arm/mach-ixp4xx/dsmg600-pci.c index c7612010b3fc..0532510b5e8c 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-pci.c +++ b/arch/arm/mach-ixp4xx/dsmg600-pci.c @@ -44,7 +44,7 @@ void __init dsmg600_pci_preinit(void) ixp4xx_pci_preinit(); } -static int __init dsmg600_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init dsmg600_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { static int pci_irq_table[MAX_DEV][IRQ_LINES] = { { IXP4XX_GPIO_IRQ(INTE), -1, -1 }, diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c index 44ccde9d4879..d2ac803328f7 100644 --- a/arch/arm/mach-ixp4xx/fsg-pci.c +++ b/arch/arm/mach-ixp4xx/fsg-pci.c @@ -38,7 +38,7 @@ void __init fsg_pci_preinit(void) ixp4xx_pci_preinit(); } -static int __init fsg_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init fsg_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { static int pci_irq_table[IRQ_LINES] = { IXP4XX_GPIO_IRQ(INTC), diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c index fc1124168874..76581fb467c4 100644 --- a/arch/arm/mach-ixp4xx/gateway7001-pci.c +++ b/arch/arm/mach-ixp4xx/gateway7001-pci.c @@ -35,7 +35,8 @@ void __init gateway7001_pci_preinit(void) ixp4xx_pci_preinit(); } -static int __init gateway7001_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init gateway7001_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { if (slot == 1) return IRQ_IXP4XX_GPIO11; diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c index 5f00ad224fe0..7548d9a2efe2 100644 --- a/arch/arm/mach-ixp4xx/goramo_mlr.c +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -462,7 +462,7 @@ static void __init gmlr_pci_postinit(void) } } -static int __init gmlr_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init gmlr_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { switch(slot) { case SLOT_ETHA: return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA); diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c index 38cc0725dbd8..d68fc068c38d 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c @@ -49,7 +49,7 @@ void __init gtwx5715_pci_preinit(void) } -static int __init gtwx5715_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init gtwx5715_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int rc = -1; diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c index 58f400417eaf..fffd8c5e40bf 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c @@ -43,7 +43,7 @@ void __init ixdp425_pci_preinit(void) ixp4xx_pci_preinit(); } -static int __init ixdp425_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init ixdp425_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { static int pci_irq_table[IRQ_LINES] = { IXP4XX_GPIO_IRQ(INTA), diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c index e64f6d041488..34efe75015ec 100644 --- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c @@ -31,7 +31,7 @@ void __init ixdpg425_pci_preinit(void) ixp4xx_pci_preinit(); } -static int __init ixdpg425_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init ixdpg425_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (slot == 12 || slot == 13) return IRQ_IXP4XX_GPIO7; diff --git a/arch/arm/mach-ixp4xx/nas100d-pci.c b/arch/arm/mach-ixp4xx/nas100d-pci.c index 428d1202b799..5434ccf553eb 100644 --- a/arch/arm/mach-ixp4xx/nas100d-pci.c +++ b/arch/arm/mach-ixp4xx/nas100d-pci.c @@ -41,7 +41,7 @@ void __init nas100d_pci_preinit(void) ixp4xx_pci_preinit(); } -static int __init nas100d_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init nas100d_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { static int pci_irq_table[MAX_DEV][IRQ_LINES] = { { IXP4XX_GPIO_IRQ(INTA), -1, -1 }, diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c index 2e85f76b950d..b57160535e47 100644 --- a/arch/arm/mach-ixp4xx/nslu2-pci.c +++ b/arch/arm/mach-ixp4xx/nslu2-pci.c @@ -38,7 +38,7 @@ void __init nslu2_pci_preinit(void) ixp4xx_pci_preinit(); } -static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init nslu2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { static int pci_irq_table[IRQ_LINES] = { IXP4XX_GPIO_IRQ(INTA), diff --git a/arch/arm/mach-ixp4xx/vulcan-pci.c b/arch/arm/mach-ixp4xx/vulcan-pci.c index 03bdec5140a7..0bc3f34c282f 100644 --- a/arch/arm/mach-ixp4xx/vulcan-pci.c +++ b/arch/arm/mach-ixp4xx/vulcan-pci.c @@ -43,7 +43,7 @@ void __init vulcan_pci_preinit(void) ixp4xx_pci_preinit(); } -static int __init vulcan_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init vulcan_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (slot == 1) return IXP4XX_GPIO_IRQ(INTA); diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c index 17f3cf59a31b..f27dfcfe811b 100644 --- a/arch/arm/mach-ixp4xx/wg302v2-pci.c +++ b/arch/arm/mach-ixp4xx/wg302v2-pci.c @@ -35,7 +35,7 @@ void __init wg302v2_pci_preinit(void) ixp4xx_pci_preinit(); } -static int __init wg302v2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init wg302v2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (slot == 1) return IRQ_IXP4XX_GPIO8; diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index bfeb9c900cec..74b992d810ea 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -245,7 +245,8 @@ kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys) return bus; } -static int __init kirkwood_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { struct pcie_port *pp = bus_to_port(dev->bus); diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c index ada92b6bed24..1338cb3e9827 100644 --- a/arch/arm/mach-ks8695/board-dsm320.c +++ b/arch/arm/mach-ks8695/board-dsm320.c @@ -34,7 +34,7 @@ #include "generic.h" #ifdef CONFIG_PCI -static int dsm320_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int dsm320_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { switch (slot) { case 0: diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c index c7ad09bd6ea2..e2e3cba8dcdb 100644 --- a/arch/arm/mach-ks8695/board-micrel.c +++ b/arch/arm/mach-ks8695/board-micrel.c @@ -24,7 +24,7 @@ #include "generic.h" #ifdef CONFIG_PCI -static int micrel_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int micrel_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { return KS8695_IRQ_EXTERN0; } diff --git a/arch/arm/mach-ks8695/include/mach/devices.h b/arch/arm/mach-ks8695/include/mach/devices.h index 2744fecb429c..85a3c9aa7d13 100644 --- a/arch/arm/mach-ks8695/include/mach/devices.h +++ b/arch/arm/mach-ks8695/include/mach/devices.h @@ -30,7 +30,7 @@ extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led); struct ks8695_pci_cfg { short mode; - int (*map_irq)(struct pci_dev *, u8, u8); + int (*map_irq)(const struct pci_dev *, u8, u8); }; extern __init void ks8695_init_pci(struct ks8695_pci_cfg *); diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index c070c24255f4..98e25d9aaab6 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -16,16 +16,18 @@ #include <mach/gpio.h> #include <mach/pxa168.h> #include <mach/mfp-pxa168.h> -#include <mach/mfp-gplugd.h> #include "common.h" static unsigned long gplugd_pin_config[] __initdata = { /* UART3 */ - GPIO8_UART3_SOUT, - GPIO9_UART3_SIN, - GPI1O_UART3_CTS, - GPI11_UART3_RTS, + GPIO8_UART3_TXD, + GPIO9_UART3_RXD, + GPIO1O_UART3_CTS, + GPIO11_UART3_RTS, + + /* USB OTG PEN */ + GPIO18_GPIO, /* MMC2 */ GPIO28_MMC2_CMD, @@ -109,6 +111,12 @@ static unsigned long gplugd_pin_config[] __initdata = { GPIO105_CI2C_SDA, GPIO106_CI2C_SCL, + /* SPI NOR Flash on SSP2 */ + GPIO107_SSP2_RXD, + GPIO108_SSP2_TXD, + GPIO110_GPIO, /* SPI_CSn */ + GPIO111_SSP2_CLK, + /* Select JTAG */ GPIO109_GPIO, @@ -154,7 +162,7 @@ static void __init select_disp_freq(void) "frequency\n"); } else { gpio_direction_output(35, 1); - gpio_free(104); + gpio_free(35); } if (unlikely(gpio_request(85, "DISP_FREQ_SEL_2"))) { @@ -162,7 +170,7 @@ static void __init select_disp_freq(void) "frequency\n"); } else { gpio_direction_output(85, 0); - gpio_free(104); + gpio_free(85); } } diff --git a/arch/arm/mach-mmp/include/mach/mfp-gplugd.h b/arch/arm/mach-mmp/include/mach/mfp-gplugd.h deleted file mode 100644 index b8cf38d85600..000000000000 --- a/arch/arm/mach-mmp/include/mach/mfp-gplugd.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * linux/arch/arm/mach-mmp/include/mach/mfp-gplugd.h - * - * MFP definitions used in gplugD - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_MFP_GPLUGD_H -#define __MACH_MFP_GPLUGD_H - -#include <plat/mfp.h> -#include <mach/mfp.h> - -/* UART3 */ -#define GPIO8_UART3_SOUT MFP_CFG(GPIO8, AF2) -#define GPIO9_UART3_SIN MFP_CFG(GPIO9, AF2) -#define GPI1O_UART3_CTS MFP_CFG(GPIO10, AF2) -#define GPI11_UART3_RTS MFP_CFG(GPIO11, AF2) - -/* MMC2 */ -#define GPIO28_MMC2_CMD MFP_CFG_DRV(GPIO28, AF6, FAST) -#define GPIO29_MMC2_CLK MFP_CFG_DRV(GPIO29, AF6, FAST) -#define GPIO30_MMC2_DAT0 MFP_CFG_DRV(GPIO30, AF6, FAST) -#define GPIO31_MMC2_DAT1 MFP_CFG_DRV(GPIO31, AF6, FAST) -#define GPIO32_MMC2_DAT2 MFP_CFG_DRV(GPIO32, AF6, FAST) -#define GPIO33_MMC2_DAT3 MFP_CFG_DRV(GPIO33, AF6, FAST) - -/* I2S */ -#undef GPIO114_I2S_FRM -#undef GPIO115_I2S_BCLK - -#define GPIO114_I2S_FRM MFP_CFG_DRV(GPIO114, AF1, FAST) -#define GPIO115_I2S_BCLK MFP_CFG_DRV(GPIO115, AF1, FAST) -#define GPIO116_I2S_TXD MFP_CFG_DRV(GPIO116, AF1, FAST) - -/* MMC4 */ -#define GPIO125_MMC4_DAT3 MFP_CFG_DRV(GPIO125, AF7, FAST) -#define GPIO126_MMC4_DAT2 MFP_CFG_DRV(GPIO126, AF7, FAST) -#define GPIO127_MMC4_DAT1 MFP_CFG_DRV(GPIO127, AF7, FAST) -#define GPIO0_2_MMC4_DAT0 MFP_CFG_DRV(GPIO0_2, AF7, FAST) -#define GPIO1_2_MMC4_CMD MFP_CFG_DRV(GPIO1_2, AF7, FAST) -#define GPIO2_2_MMC4_CLK MFP_CFG_DRV(GPIO2_2, AF7, FAST) - -/* OTG GPIO */ -#define GPIO_USB_OTG_PEN 18 -#define GPIO_USB_OIDIR 20 - -/* Other GPIOs are 35, 84, 85 */ -#endif /* __MACH_MFP_GPLUGD_H */ diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h index 8c782328b21c..92aaa3c19d61 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h @@ -203,6 +203,10 @@ #define GPIO33_CF_nCD2 MFP_CFG(GPIO33, AF3) /* UART */ +#define GPIO8_UART3_TXD MFP_CFG(GPIO8, AF2) +#define GPIO9_UART3_RXD MFP_CFG(GPIO9, AF2) +#define GPIO1O_UART3_CTS MFP_CFG(GPIO10, AF2) +#define GPIO11_UART3_RTS MFP_CFG(GPIO11, AF2) #define GPIO88_UART2_TXD MFP_CFG(GPIO88, AF2) #define GPIO89_UART2_RXD MFP_CFG(GPIO89, AF2) #define GPIO107_UART1_TXD MFP_CFG_DRV(GPIO107, AF1, FAST) @@ -232,6 +236,22 @@ #define GPIO53_MMC1_CD MFP_CFG(GPIO53, AF1) #define GPIO46_MMC1_WP MFP_CFG(GPIO46, AF1) +/* MMC2 */ +#define GPIO28_MMC2_CMD MFP_CFG_DRV(GPIO28, AF6, FAST) +#define GPIO29_MMC2_CLK MFP_CFG_DRV(GPIO29, AF6, FAST) +#define GPIO30_MMC2_DAT0 MFP_CFG_DRV(GPIO30, AF6, FAST) +#define GPIO31_MMC2_DAT1 MFP_CFG_DRV(GPIO31, AF6, FAST) +#define GPIO32_MMC2_DAT2 MFP_CFG_DRV(GPIO32, AF6, FAST) +#define GPIO33_MMC2_DAT3 MFP_CFG_DRV(GPIO33, AF6, FAST) + +/* MMC4 */ +#define GPIO125_MMC4_DAT3 MFP_CFG_DRV(GPIO125, AF7, FAST) +#define GPIO126_MMC4_DAT2 MFP_CFG_DRV(GPIO126, AF7, FAST) +#define GPIO127_MMC4_DAT1 MFP_CFG_DRV(GPIO127, AF7, FAST) +#define GPIO0_2_MMC4_DAT0 MFP_CFG_DRV(GPIO0_2, AF7, FAST) +#define GPIO1_2_MMC4_CMD MFP_CFG_DRV(GPIO1_2, AF7, FAST) +#define GPIO2_2_MMC4_CLK MFP_CFG_DRV(GPIO2_2, AF7, FAST) + /* LCD */ #define GPIO84_LCD_CS MFP_CFG(GPIO84, AF1) #define GPIO60_LCD_DD0 MFP_CFG(GPIO60, AF1) @@ -269,11 +289,12 @@ #define GPIO106_CI2C_SCL MFP_CFG(GPIO106, AF1) /* I2S */ -#define GPIO113_I2S_MCLK MFP_CFG(GPIO113,AF6) -#define GPIO114_I2S_FRM MFP_CFG(GPIO114,AF1) -#define GPIO115_I2S_BCLK MFP_CFG(GPIO115,AF1) -#define GPIO116_I2S_RXD MFP_CFG(GPIO116,AF2) -#define GPIO117_I2S_TXD MFP_CFG(GPIO117,AF2) +#define GPIO113_I2S_MCLK MFP_CFG(GPIO113, AF6) +#define GPIO114_I2S_FRM MFP_CFG(GPIO114, AF1) +#define GPIO115_I2S_BCLK MFP_CFG(GPIO115, AF1) +#define GPIO116_I2S_RXD MFP_CFG(GPIO116, AF2) +#define GPIO116_I2S_TXD MFP_CFG(GPIO116, AF1) +#define GPIO117_I2S_TXD MFP_CFG(GPIO117, AF2) /* PWM */ #define GPIO96_PWM3_OUT MFP_CFG(GPIO96, AF1) @@ -324,4 +345,10 @@ #define GPIO101_MII_MDIO MFP_CFG(GPIO101, AF5) #define GPIO103_RX_DV MFP_CFG(GPIO103, AF5) +/* SSP2 */ +#define GPIO107_SSP2_RXD MFP_CFG(GPIO107, AF4) +#define GPIO108_SSP2_TXD MFP_CFG(GPIO108, AF4) +#define GPIO111_SSP2_CLK MFP_CFG(GPIO111, AF4) +#define GPIO112_SSP2_FRM MFP_CFG(GPIO112, AF4) + #endif /* __ASM_MACH_MFP_PXA168_H */ diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index 99833b9485cf..4e91ee6e27c8 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -51,12 +51,12 @@ static inline uint32_t timer_read(void) { int delay = 100; - __raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(0)); + __raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(1)); while (delay--) cpu_relax(); - return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(0)); + return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(1)); } unsigned long long notrace sched_clock(void) @@ -75,28 +75,51 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) { struct clock_event_device *c = dev_id; - /* disable and clear pending interrupt status */ - __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0)); - __raw_writel(0x1, TIMERS_VIRT_BASE + TMR_ICR(0)); + /* + * Clear pending interrupt status. + */ + __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0)); + + /* + * Disable timer 0. + */ + __raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER); + c->event_handler(c); + return IRQ_HANDLED; } static int timer_set_next_event(unsigned long delta, struct clock_event_device *dev) { - unsigned long flags, next; + unsigned long flags; local_irq_save(flags); - /* clear pending interrupt status and enable */ + /* + * Disable timer 0. + */ + __raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER); + + /* + * Clear and enable timer match 0 interrupt. + */ __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0)); __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_IER(0)); - next = timer_read() + delta; - __raw_writel(next, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0)); + /* + * Setup new clockevent timer value. + */ + __raw_writel(delta - 1, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0)); + + /* + * Enable timer 0. + */ + __raw_writel(0x03, TIMERS_VIRT_BASE + TMR_CER); local_irq_restore(flags); + return 0; } @@ -145,23 +168,26 @@ static struct clocksource cksrc = { static void __init timer_config(void) { uint32_t ccr = __raw_readl(TIMERS_VIRT_BASE + TMR_CCR); - uint32_t cer = __raw_readl(TIMERS_VIRT_BASE + TMR_CER); - uint32_t cmr = __raw_readl(TIMERS_VIRT_BASE + TMR_CMR); - __raw_writel(cer & ~0x1, TIMERS_VIRT_BASE + TMR_CER); /* disable */ + __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_CER); /* disable */ - ccr &= (cpu_is_mmp2()) ? TMR_CCR_CS_0(0) : TMR_CCR_CS_0(3); + ccr &= (cpu_is_mmp2()) ? (TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) : + (TMR_CCR_CS_0(3) | TMR_CCR_CS_1(3)); __raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR); - /* free-running mode */ - __raw_writel(cmr | 0x01, TIMERS_VIRT_BASE + TMR_CMR); + /* set timer 0 to periodic mode, and timer 1 to free-running mode */ + __raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CMR); - __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* free-running */ + __raw_writel(0x1, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* periodic */ __raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(0)); /* clear status */ __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0)); - /* enable timer counter */ - __raw_writel(cer | 0x01, TIMERS_VIRT_BASE + TMR_CER); + __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(1)); /* free-running */ + __raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(1)); /* clear status */ + __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(1)); + + /* enable timer 1 counter */ + __raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CER); } static struct irqaction timer_irq = { diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 888e92502e15..ebde97f5d5f0 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -11,6 +11,7 @@ config ARCH_MSM7X00A select MSM_SMD select MSM_SMD_PKG3 select CPU_V6 + select GPIO_MSM_V1 select MSM_PROC_COMM select HAS_MSM_DEBUG_UART_PHYS @@ -22,6 +23,7 @@ config ARCH_MSM7X30 select MSM_VIC select CPU_V7 select MSM_GPIOMUX + select GPIO_MSM_V1 select MSM_PROC_COMM select HAS_MSM_DEBUG_UART_PHYS @@ -33,6 +35,7 @@ config ARCH_QSD8X50 select MSM_VIC select CPU_V7 select MSM_GPIOMUX + select GPIO_MSM_V1 select MSM_PROC_COMM select HAS_MSM_DEBUG_UART_PHYS @@ -44,6 +47,7 @@ config ARCH_MSM8X60 select ARM_GIC select CPU_V7 select MSM_V2_TLMM + select GPIO_MSM_V2 select MSM_GPIOMUX select MSM_SCM if SMP diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index b70658c5ae00..4285dfd80b6f 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -29,11 +29,3 @@ obj-$(CONFIG_ARCH_MSM8960) += board-msm8960.o devices-msm8960.o obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-v1.o gpiomux.o obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o obj-$(CONFIG_ARCH_MSM8X60) += gpiomux-8x60.o gpiomux-v2.o gpiomux.o -ifdef CONFIG_MSM_V2_TLMM -ifndef CONFIG_ARCH_MSM8960 -# TODO: TLMM Mapping issues need to be resolved -obj-y += gpio-v2.o -endif -else -obj-y += gpio.o -endif diff --git a/arch/arm/mach-msm/gpio-v2.c b/arch/arm/mach-msm/gpio-v2.c deleted file mode 100644 index cc9c4fd7cccc..000000000000 --- a/arch/arm/mach-msm/gpio-v2.c +++ /dev/null @@ -1,433 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - */ -#define pr_fmt(fmt) "%s: " fmt, __func__ - -#include <linux/bitmap.h> -#include <linux/bitops.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spinlock.h> - -#include <asm/mach/irq.h> - -#include <mach/msm_iomap.h> -#include "gpiomux.h" - -/* Bits of interest in the GPIO_IN_OUT register. - */ -enum { - GPIO_IN = 0, - GPIO_OUT = 1 -}; - -/* Bits of interest in the GPIO_INTR_STATUS register. - */ -enum { - INTR_STATUS = 0, -}; - -/* Bits of interest in the GPIO_CFG register. - */ -enum { - GPIO_OE = 9, -}; - -/* Bits of interest in the GPIO_INTR_CFG register. - * When a GPIO triggers, two separate decisions are made, controlled - * by two separate flags. - * - * - First, INTR_RAW_STATUS_EN controls whether or not the GPIO_INTR_STATUS - * register for that GPIO will be updated to reflect the triggering of that - * gpio. If this bit is 0, this register will not be updated. - * - Second, INTR_ENABLE controls whether an interrupt is triggered. - * - * If INTR_ENABLE is set and INTR_RAW_STATUS_EN is NOT set, an interrupt - * can be triggered but the status register will not reflect it. - */ -enum { - INTR_ENABLE = 0, - INTR_POL_CTL = 1, - INTR_DECT_CTL = 2, - INTR_RAW_STATUS_EN = 3, -}; - -/* Codes of interest in GPIO_INTR_CFG_SU. - */ -enum { - TARGET_PROC_SCORPION = 4, - TARGET_PROC_NONE = 7, -}; - - -#define GPIO_INTR_CFG_SU(gpio) (MSM_TLMM_BASE + 0x0400 + (0x04 * (gpio))) -#define GPIO_CONFIG(gpio) (MSM_TLMM_BASE + 0x1000 + (0x10 * (gpio))) -#define GPIO_IN_OUT(gpio) (MSM_TLMM_BASE + 0x1004 + (0x10 * (gpio))) -#define GPIO_INTR_CFG(gpio) (MSM_TLMM_BASE + 0x1008 + (0x10 * (gpio))) -#define GPIO_INTR_STATUS(gpio) (MSM_TLMM_BASE + 0x100c + (0x10 * (gpio))) - -/** - * struct msm_gpio_dev: the MSM8660 SoC GPIO device structure - * - * @enabled_irqs: a bitmap used to optimize the summary-irq handler. By - * keeping track of which gpios are unmasked as irq sources, we avoid - * having to do readl calls on hundreds of iomapped registers each time - * the summary interrupt fires in order to locate the active interrupts. - * - * @wake_irqs: a bitmap for tracking which interrupt lines are enabled - * as wakeup sources. When the device is suspended, interrupts which are - * not wakeup sources are disabled. - * - * @dual_edge_irqs: a bitmap used to track which irqs are configured - * as dual-edge, as this is not supported by the hardware and requires - * some special handling in the driver. - */ -struct msm_gpio_dev { - struct gpio_chip gpio_chip; - DECLARE_BITMAP(enabled_irqs, NR_GPIO_IRQS); - DECLARE_BITMAP(wake_irqs, NR_GPIO_IRQS); - DECLARE_BITMAP(dual_edge_irqs, NR_GPIO_IRQS); -}; - -static DEFINE_SPINLOCK(tlmm_lock); - -static inline struct msm_gpio_dev *to_msm_gpio_dev(struct gpio_chip *chip) -{ - return container_of(chip, struct msm_gpio_dev, gpio_chip); -} - -static inline void set_gpio_bits(unsigned n, void __iomem *reg) -{ - writel(readl(reg) | n, reg); -} - -static inline void clear_gpio_bits(unsigned n, void __iomem *reg) -{ - writel(readl(reg) & ~n, reg); -} - -static int msm_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - return readl(GPIO_IN_OUT(offset)) & BIT(GPIO_IN); -} - -static void msm_gpio_set(struct gpio_chip *chip, unsigned offset, int val) -{ - writel(val ? BIT(GPIO_OUT) : 0, GPIO_IN_OUT(offset)); -} - -static int msm_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - unsigned long irq_flags; - - spin_lock_irqsave(&tlmm_lock, irq_flags); - clear_gpio_bits(BIT(GPIO_OE), GPIO_CONFIG(offset)); - spin_unlock_irqrestore(&tlmm_lock, irq_flags); - return 0; -} - -static int msm_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, - int val) -{ - unsigned long irq_flags; - - spin_lock_irqsave(&tlmm_lock, irq_flags); - msm_gpio_set(chip, offset, val); - set_gpio_bits(BIT(GPIO_OE), GPIO_CONFIG(offset)); - spin_unlock_irqrestore(&tlmm_lock, irq_flags); - return 0; -} - -static int msm_gpio_request(struct gpio_chip *chip, unsigned offset) -{ - return msm_gpiomux_get(chip->base + offset); -} - -static void msm_gpio_free(struct gpio_chip *chip, unsigned offset) -{ - msm_gpiomux_put(chip->base + offset); -} - -static int msm_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -{ - return MSM_GPIO_TO_INT(chip->base + offset); -} - -static inline int msm_irq_to_gpio(struct gpio_chip *chip, unsigned irq) -{ - return irq - MSM_GPIO_TO_INT(chip->base); -} - -static struct msm_gpio_dev msm_gpio = { - .gpio_chip = { - .base = 0, - .ngpio = NR_GPIO_IRQS, - .direction_input = msm_gpio_direction_input, - .direction_output = msm_gpio_direction_output, - .get = msm_gpio_get, - .set = msm_gpio_set, - .to_irq = msm_gpio_to_irq, - .request = msm_gpio_request, - .free = msm_gpio_free, - }, -}; - -/* For dual-edge interrupts in software, since the hardware has no - * such support: - * - * At appropriate moments, this function may be called to flip the polarity - * settings of both-edge irq lines to try and catch the next edge. - * - * The attempt is considered successful if: - * - the status bit goes high, indicating that an edge was caught, or - * - the input value of the gpio doesn't change during the attempt. - * If the value changes twice during the process, that would cause the first - * test to fail but would force the second, as two opposite - * transitions would cause a detection no matter the polarity setting. - * - * The do-loop tries to sledge-hammer closed the timing hole between - * the initial value-read and the polarity-write - if the line value changes - * during that window, an interrupt is lost, the new polarity setting is - * incorrect, and the first success test will fail, causing a retry. - * - * Algorithm comes from Google's msmgpio driver, see mach-msm/gpio.c. - */ -static void msm_gpio_update_dual_edge_pos(unsigned gpio) -{ - int loop_limit = 100; - unsigned val, val2, intstat; - - do { - val = readl(GPIO_IN_OUT(gpio)) & BIT(GPIO_IN); - if (val) - clear_gpio_bits(BIT(INTR_POL_CTL), GPIO_INTR_CFG(gpio)); - else - set_gpio_bits(BIT(INTR_POL_CTL), GPIO_INTR_CFG(gpio)); - val2 = readl(GPIO_IN_OUT(gpio)) & BIT(GPIO_IN); - intstat = readl(GPIO_INTR_STATUS(gpio)) & BIT(INTR_STATUS); - if (intstat || val == val2) - return; - } while (loop_limit-- > 0); - pr_err("dual-edge irq failed to stabilize, " - "interrupts dropped. %#08x != %#08x\n", - val, val2); -} - -static void msm_gpio_irq_ack(struct irq_data *d) -{ - int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, d->irq); - - writel(BIT(INTR_STATUS), GPIO_INTR_STATUS(gpio)); - if (test_bit(gpio, msm_gpio.dual_edge_irqs)) - msm_gpio_update_dual_edge_pos(gpio); -} - -static void msm_gpio_irq_mask(struct irq_data *d) -{ - int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, d->irq); - unsigned long irq_flags; - - spin_lock_irqsave(&tlmm_lock, irq_flags); - writel(TARGET_PROC_NONE, GPIO_INTR_CFG_SU(gpio)); - clear_gpio_bits(INTR_RAW_STATUS_EN | INTR_ENABLE, GPIO_INTR_CFG(gpio)); - __clear_bit(gpio, msm_gpio.enabled_irqs); - spin_unlock_irqrestore(&tlmm_lock, irq_flags); -} - -static void msm_gpio_irq_unmask(struct irq_data *d) -{ - int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, d->irq); - unsigned long irq_flags; - - spin_lock_irqsave(&tlmm_lock, irq_flags); - __set_bit(gpio, msm_gpio.enabled_irqs); - set_gpio_bits(INTR_RAW_STATUS_EN | INTR_ENABLE, GPIO_INTR_CFG(gpio)); - writel(TARGET_PROC_SCORPION, GPIO_INTR_CFG_SU(gpio)); - spin_unlock_irqrestore(&tlmm_lock, irq_flags); -} - -static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int flow_type) -{ - int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, d->irq); - unsigned long irq_flags; - uint32_t bits; - - spin_lock_irqsave(&tlmm_lock, irq_flags); - - bits = readl(GPIO_INTR_CFG(gpio)); - - if (flow_type & IRQ_TYPE_EDGE_BOTH) { - bits |= BIT(INTR_DECT_CTL); - __irq_set_handler_locked(d->irq, handle_edge_irq); - if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) - __set_bit(gpio, msm_gpio.dual_edge_irqs); - else - __clear_bit(gpio, msm_gpio.dual_edge_irqs); - } else { - bits &= ~BIT(INTR_DECT_CTL); - __irq_set_handler_locked(d->irq, handle_level_irq); - __clear_bit(gpio, msm_gpio.dual_edge_irqs); - } - - if (flow_type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH)) - bits |= BIT(INTR_POL_CTL); - else - bits &= ~BIT(INTR_POL_CTL); - - writel(bits, GPIO_INTR_CFG(gpio)); - - if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) - msm_gpio_update_dual_edge_pos(gpio); - - spin_unlock_irqrestore(&tlmm_lock, irq_flags); - - return 0; -} - -/* - * When the summary IRQ is raised, any number of GPIO lines may be high. - * It is the job of the summary handler to find all those GPIO lines - * which have been set as summary IRQ lines and which are triggered, - * and to call their interrupt handlers. - */ -static void msm_summary_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - unsigned long i; - struct irq_chip *chip = irq_desc_get_chip(desc); - - chained_irq_enter(chip, desc); - - for (i = find_first_bit(msm_gpio.enabled_irqs, NR_GPIO_IRQS); - i < NR_GPIO_IRQS; - i = find_next_bit(msm_gpio.enabled_irqs, NR_GPIO_IRQS, i + 1)) { - if (readl(GPIO_INTR_STATUS(i)) & BIT(INTR_STATUS)) - generic_handle_irq(msm_gpio_to_irq(&msm_gpio.gpio_chip, - i)); - } - - chained_irq_exit(chip, desc); -} - -static int msm_gpio_irq_set_wake(struct irq_data *d, unsigned int on) -{ - int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, d->irq); - - if (on) { - if (bitmap_empty(msm_gpio.wake_irqs, NR_GPIO_IRQS)) - irq_set_irq_wake(TLMM_SCSS_SUMMARY_IRQ, 1); - set_bit(gpio, msm_gpio.wake_irqs); - } else { - clear_bit(gpio, msm_gpio.wake_irqs); - if (bitmap_empty(msm_gpio.wake_irqs, NR_GPIO_IRQS)) - irq_set_irq_wake(TLMM_SCSS_SUMMARY_IRQ, 0); - } - - return 0; -} - -static struct irq_chip msm_gpio_irq_chip = { - .name = "msmgpio", - .irq_mask = msm_gpio_irq_mask, - .irq_unmask = msm_gpio_irq_unmask, - .irq_ack = msm_gpio_irq_ack, - .irq_set_type = msm_gpio_irq_set_type, - .irq_set_wake = msm_gpio_irq_set_wake, -}; - -static int __devinit msm_gpio_probe(struct platform_device *dev) -{ - int i, irq, ret; - - bitmap_zero(msm_gpio.enabled_irqs, NR_GPIO_IRQS); - bitmap_zero(msm_gpio.wake_irqs, NR_GPIO_IRQS); - bitmap_zero(msm_gpio.dual_edge_irqs, NR_GPIO_IRQS); - msm_gpio.gpio_chip.label = dev->name; - ret = gpiochip_add(&msm_gpio.gpio_chip); - if (ret < 0) - return ret; - - for (i = 0; i < msm_gpio.gpio_chip.ngpio; ++i) { - irq = msm_gpio_to_irq(&msm_gpio.gpio_chip, i); - irq_set_chip_and_handler(irq, &msm_gpio_irq_chip, - handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - - irq_set_chained_handler(TLMM_SCSS_SUMMARY_IRQ, - msm_summary_irq_handler); - return 0; -} - -static int __devexit msm_gpio_remove(struct platform_device *dev) -{ - int ret = gpiochip_remove(&msm_gpio.gpio_chip); - - if (ret < 0) - return ret; - - irq_set_handler(TLMM_SCSS_SUMMARY_IRQ, NULL); - - return 0; -} - -static struct platform_driver msm_gpio_driver = { - .probe = msm_gpio_probe, - .remove = __devexit_p(msm_gpio_remove), - .driver = { - .name = "msmgpio", - .owner = THIS_MODULE, - }, -}; - -static struct platform_device msm_device_gpio = { - .name = "msmgpio", - .id = -1, -}; - -static int __init msm_gpio_init(void) -{ - int rc; - - rc = platform_driver_register(&msm_gpio_driver); - if (!rc) { - rc = platform_device_register(&msm_device_gpio); - if (rc) - platform_driver_unregister(&msm_gpio_driver); - } - - return rc; -} - -static void __exit msm_gpio_exit(void) -{ - platform_device_unregister(&msm_device_gpio); - platform_driver_unregister(&msm_gpio_driver); -} - -postcore_initcall(msm_gpio_init); -module_exit(msm_gpio_exit); - -MODULE_AUTHOR("Gregory Bean <gbean@codeaurora.org>"); -MODULE_DESCRIPTION("Driver for Qualcomm MSM TLMMv2 SoC GPIOs"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:msmgpio"); diff --git a/arch/arm/mach-msm/gpio.c b/arch/arm/mach-msm/gpio.c deleted file mode 100644 index 5ea273b00da8..000000000000 --- a/arch/arm/mach-msm/gpio.c +++ /dev/null @@ -1,376 +0,0 @@ -/* linux/arch/arm/mach-msm/gpio.c - * - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/bitops.h> -#include <linux/gpio.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/module.h> -#include "gpio_hw.h" -#include "gpiomux.h" - -#define FIRST_GPIO_IRQ MSM_GPIO_TO_INT(0) - -#define MSM_GPIO_BANK(bank, first, last) \ - { \ - .regs = { \ - .out = MSM_GPIO_OUT_##bank, \ - .in = MSM_GPIO_IN_##bank, \ - .int_status = MSM_GPIO_INT_STATUS_##bank, \ - .int_clear = MSM_GPIO_INT_CLEAR_##bank, \ - .int_en = MSM_GPIO_INT_EN_##bank, \ - .int_edge = MSM_GPIO_INT_EDGE_##bank, \ - .int_pos = MSM_GPIO_INT_POS_##bank, \ - .oe = MSM_GPIO_OE_##bank, \ - }, \ - .chip = { \ - .base = (first), \ - .ngpio = (last) - (first) + 1, \ - .get = msm_gpio_get, \ - .set = msm_gpio_set, \ - .direction_input = msm_gpio_direction_input, \ - .direction_output = msm_gpio_direction_output, \ - .to_irq = msm_gpio_to_irq, \ - .request = msm_gpio_request, \ - .free = msm_gpio_free, \ - } \ - } - -#define MSM_GPIO_BROKEN_INT_CLEAR 1 - -struct msm_gpio_regs { - void __iomem *out; - void __iomem *in; - void __iomem *int_status; - void __iomem *int_clear; - void __iomem *int_en; - void __iomem *int_edge; - void __iomem *int_pos; - void __iomem *oe; -}; - -struct msm_gpio_chip { - spinlock_t lock; - struct gpio_chip chip; - struct msm_gpio_regs regs; -#if MSM_GPIO_BROKEN_INT_CLEAR - unsigned int_status_copy; -#endif - unsigned int both_edge_detect; - unsigned int int_enable[2]; /* 0: awake, 1: sleep */ -}; - -static int msm_gpio_write(struct msm_gpio_chip *msm_chip, - unsigned offset, unsigned on) -{ - unsigned mask = BIT(offset); - unsigned val; - - val = readl(msm_chip->regs.out); - if (on) - writel(val | mask, msm_chip->regs.out); - else - writel(val & ~mask, msm_chip->regs.out); - return 0; -} - -static void msm_gpio_update_both_edge_detect(struct msm_gpio_chip *msm_chip) -{ - int loop_limit = 100; - unsigned pol, val, val2, intstat; - do { - val = readl(msm_chip->regs.in); - pol = readl(msm_chip->regs.int_pos); - pol = (pol & ~msm_chip->both_edge_detect) | - (~val & msm_chip->both_edge_detect); - writel(pol, msm_chip->regs.int_pos); - intstat = readl(msm_chip->regs.int_status); - val2 = readl(msm_chip->regs.in); - if (((val ^ val2) & msm_chip->both_edge_detect & ~intstat) == 0) - return; - } while (loop_limit-- > 0); - printk(KERN_ERR "msm_gpio_update_both_edge_detect, " - "failed to reach stable state %x != %x\n", val, val2); -} - -static int msm_gpio_clear_detect_status(struct msm_gpio_chip *msm_chip, - unsigned offset) -{ - unsigned bit = BIT(offset); - -#if MSM_GPIO_BROKEN_INT_CLEAR - /* Save interrupts that already triggered before we loose them. */ - /* Any interrupt that triggers between the read of int_status */ - /* and the write to int_clear will still be lost though. */ - msm_chip->int_status_copy |= readl(msm_chip->regs.int_status); - msm_chip->int_status_copy &= ~bit; -#endif - writel(bit, msm_chip->regs.int_clear); - msm_gpio_update_both_edge_detect(msm_chip); - return 0; -} - -static int msm_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - struct msm_gpio_chip *msm_chip; - unsigned long irq_flags; - - msm_chip = container_of(chip, struct msm_gpio_chip, chip); - spin_lock_irqsave(&msm_chip->lock, irq_flags); - writel(readl(msm_chip->regs.oe) & ~BIT(offset), msm_chip->regs.oe); - spin_unlock_irqrestore(&msm_chip->lock, irq_flags); - return 0; -} - -static int -msm_gpio_direction_output(struct gpio_chip *chip, unsigned offset, int value) -{ - struct msm_gpio_chip *msm_chip; - unsigned long irq_flags; - - msm_chip = container_of(chip, struct msm_gpio_chip, chip); - spin_lock_irqsave(&msm_chip->lock, irq_flags); - msm_gpio_write(msm_chip, offset, value); - writel(readl(msm_chip->regs.oe) | BIT(offset), msm_chip->regs.oe); - spin_unlock_irqrestore(&msm_chip->lock, irq_flags); - return 0; -} - -static int msm_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct msm_gpio_chip *msm_chip; - - msm_chip = container_of(chip, struct msm_gpio_chip, chip); - return (readl(msm_chip->regs.in) & (1U << offset)) ? 1 : 0; -} - -static void msm_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct msm_gpio_chip *msm_chip; - unsigned long irq_flags; - - msm_chip = container_of(chip, struct msm_gpio_chip, chip); - spin_lock_irqsave(&msm_chip->lock, irq_flags); - msm_gpio_write(msm_chip, offset, value); - spin_unlock_irqrestore(&msm_chip->lock, irq_flags); -} - -static int msm_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -{ - return MSM_GPIO_TO_INT(chip->base + offset); -} - -#ifdef CONFIG_MSM_GPIOMUX -static int msm_gpio_request(struct gpio_chip *chip, unsigned offset) -{ - return msm_gpiomux_get(chip->base + offset); -} - -static void msm_gpio_free(struct gpio_chip *chip, unsigned offset) -{ - msm_gpiomux_put(chip->base + offset); -} -#else -#define msm_gpio_request NULL -#define msm_gpio_free NULL -#endif - -struct msm_gpio_chip msm_gpio_chips[] = { -#if defined(CONFIG_ARCH_MSM7X00A) - MSM_GPIO_BANK(0, 0, 15), - MSM_GPIO_BANK(1, 16, 42), - MSM_GPIO_BANK(2, 43, 67), - MSM_GPIO_BANK(3, 68, 94), - MSM_GPIO_BANK(4, 95, 106), - MSM_GPIO_BANK(5, 107, 121), -#elif defined(CONFIG_ARCH_MSM7X25) || defined(CONFIG_ARCH_MSM7X27) - MSM_GPIO_BANK(0, 0, 15), - MSM_GPIO_BANK(1, 16, 42), - MSM_GPIO_BANK(2, 43, 67), - MSM_GPIO_BANK(3, 68, 94), - MSM_GPIO_BANK(4, 95, 106), - MSM_GPIO_BANK(5, 107, 132), -#elif defined(CONFIG_ARCH_MSM7X30) - MSM_GPIO_BANK(0, 0, 15), - MSM_GPIO_BANK(1, 16, 43), - MSM_GPIO_BANK(2, 44, 67), - MSM_GPIO_BANK(3, 68, 94), - MSM_GPIO_BANK(4, 95, 106), - MSM_GPIO_BANK(5, 107, 133), - MSM_GPIO_BANK(6, 134, 150), - MSM_GPIO_BANK(7, 151, 181), -#elif defined(CONFIG_ARCH_QSD8X50) - MSM_GPIO_BANK(0, 0, 15), - MSM_GPIO_BANK(1, 16, 42), - MSM_GPIO_BANK(2, 43, 67), - MSM_GPIO_BANK(3, 68, 94), - MSM_GPIO_BANK(4, 95, 103), - MSM_GPIO_BANK(5, 104, 121), - MSM_GPIO_BANK(6, 122, 152), - MSM_GPIO_BANK(7, 153, 164), -#endif -}; - -static void msm_gpio_irq_ack(struct irq_data *d) -{ - unsigned long irq_flags; - struct msm_gpio_chip *msm_chip = irq_data_get_irq_chip_data(d); - spin_lock_irqsave(&msm_chip->lock, irq_flags); - msm_gpio_clear_detect_status(msm_chip, - d->irq - gpio_to_irq(msm_chip->chip.base)); - spin_unlock_irqrestore(&msm_chip->lock, irq_flags); -} - -static void msm_gpio_irq_mask(struct irq_data *d) -{ - unsigned long irq_flags; - struct msm_gpio_chip *msm_chip = irq_data_get_irq_chip_data(d); - unsigned offset = d->irq - gpio_to_irq(msm_chip->chip.base); - - spin_lock_irqsave(&msm_chip->lock, irq_flags); - /* level triggered interrupts are also latched */ - if (!(readl(msm_chip->regs.int_edge) & BIT(offset))) - msm_gpio_clear_detect_status(msm_chip, offset); - msm_chip->int_enable[0] &= ~BIT(offset); - writel(msm_chip->int_enable[0], msm_chip->regs.int_en); - spin_unlock_irqrestore(&msm_chip->lock, irq_flags); -} - -static void msm_gpio_irq_unmask(struct irq_data *d) -{ - unsigned long irq_flags; - struct msm_gpio_chip *msm_chip = irq_data_get_irq_chip_data(d); - unsigned offset = d->irq - gpio_to_irq(msm_chip->chip.base); - - spin_lock_irqsave(&msm_chip->lock, irq_flags); - /* level triggered interrupts are also latched */ - if (!(readl(msm_chip->regs.int_edge) & BIT(offset))) - msm_gpio_clear_detect_status(msm_chip, offset); - msm_chip->int_enable[0] |= BIT(offset); - writel(msm_chip->int_enable[0], msm_chip->regs.int_en); - spin_unlock_irqrestore(&msm_chip->lock, irq_flags); -} - -static int msm_gpio_irq_set_wake(struct irq_data *d, unsigned int on) -{ - unsigned long irq_flags; - struct msm_gpio_chip *msm_chip = irq_data_get_irq_chip_data(d); - unsigned offset = d->irq - gpio_to_irq(msm_chip->chip.base); - - spin_lock_irqsave(&msm_chip->lock, irq_flags); - - if (on) - msm_chip->int_enable[1] |= BIT(offset); - else - msm_chip->int_enable[1] &= ~BIT(offset); - - spin_unlock_irqrestore(&msm_chip->lock, irq_flags); - return 0; -} - -static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int flow_type) -{ - unsigned long irq_flags; - struct msm_gpio_chip *msm_chip = irq_data_get_irq_chip_data(d); - unsigned offset = d->irq - gpio_to_irq(msm_chip->chip.base); - unsigned val, mask = BIT(offset); - - spin_lock_irqsave(&msm_chip->lock, irq_flags); - val = readl(msm_chip->regs.int_edge); - if (flow_type & IRQ_TYPE_EDGE_BOTH) { - writel(val | mask, msm_chip->regs.int_edge); - __irq_set_handler_locked(d->irq, handle_edge_irq); - } else { - writel(val & ~mask, msm_chip->regs.int_edge); - __irq_set_handler_locked(d->irq, handle_level_irq); - } - if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) { - msm_chip->both_edge_detect |= mask; - msm_gpio_update_both_edge_detect(msm_chip); - } else { - msm_chip->both_edge_detect &= ~mask; - val = readl(msm_chip->regs.int_pos); - if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH)) - writel(val | mask, msm_chip->regs.int_pos); - else - writel(val & ~mask, msm_chip->regs.int_pos); - } - spin_unlock_irqrestore(&msm_chip->lock, irq_flags); - return 0; -} - -static void msm_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - int i, j, mask; - unsigned val; - - for (i = 0; i < ARRAY_SIZE(msm_gpio_chips); i++) { - struct msm_gpio_chip *msm_chip = &msm_gpio_chips[i]; - val = readl(msm_chip->regs.int_status); - val &= msm_chip->int_enable[0]; - while (val) { - mask = val & -val; - j = fls(mask) - 1; - /* printk("%s %08x %08x bit %d gpio %d irq %d\n", - __func__, v, m, j, msm_chip->chip.start + j, - FIRST_GPIO_IRQ + msm_chip->chip.start + j); */ - val &= ~mask; - generic_handle_irq(FIRST_GPIO_IRQ + - msm_chip->chip.base + j); - } - } - desc->irq_data.chip->irq_ack(&desc->irq_data); -} - -static struct irq_chip msm_gpio_irq_chip = { - .name = "msmgpio", - .irq_ack = msm_gpio_irq_ack, - .irq_mask = msm_gpio_irq_mask, - .irq_unmask = msm_gpio_irq_unmask, - .irq_set_wake = msm_gpio_irq_set_wake, - .irq_set_type = msm_gpio_irq_set_type, -}; - -static int __init msm_init_gpio(void) -{ - int i, j = 0; - - for (i = FIRST_GPIO_IRQ; i < FIRST_GPIO_IRQ + NR_GPIO_IRQS; i++) { - if (i - FIRST_GPIO_IRQ >= - msm_gpio_chips[j].chip.base + - msm_gpio_chips[j].chip.ngpio) - j++; - irq_set_chip_data(i, &msm_gpio_chips[j]); - irq_set_chip_and_handler(i, &msm_gpio_irq_chip, - handle_edge_irq); - set_irq_flags(i, IRQF_VALID); - } - - for (i = 0; i < ARRAY_SIZE(msm_gpio_chips); i++) { - spin_lock_init(&msm_gpio_chips[i].lock); - writel(0, msm_gpio_chips[i].regs.int_en); - gpiochip_add(&msm_gpio_chips[i].chip); - } - - irq_set_chained_handler(INT_GPIO_GROUP1, msm_gpio_irq_handler); - irq_set_chained_handler(INT_GPIO_GROUP2, msm_gpio_irq_handler); - irq_set_irq_wake(INT_GPIO_GROUP1, 1); - irq_set_irq_wake(INT_GPIO_GROUP2, 2); - return 0; -} - -postcore_initcall(msm_init_gpio); diff --git a/arch/arm/mach-msm/gpio_hw.h b/arch/arm/mach-msm/gpio_hw.h deleted file mode 100644 index 6b5066038baa..000000000000 --- a/arch/arm/mach-msm/gpio_hw.h +++ /dev/null @@ -1,278 +0,0 @@ -/* arch/arm/mach-msm/gpio_hw.h - * - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland <swetland@google.com> - * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ARCH_ARM_MACH_MSM_GPIO_HW_H -#define __ARCH_ARM_MACH_MSM_GPIO_HW_H - -#include <mach/msm_iomap.h> - -/* see 80-VA736-2 Rev C pp 695-751 -** -** These are actually the *shadow* gpio registers, since the -** real ones (which allow full access) are only available to the -** ARM9 side of the world. -** -** Since the _BASE need to be page-aligned when we're mapping them -** to virtual addresses, adjust for the additional offset in these -** macros. -*/ - -#if defined(CONFIG_ARCH_MSM7X30) -#define MSM_GPIO1_REG(off) (MSM_GPIO1_BASE + (off)) -#define MSM_GPIO2_REG(off) (MSM_GPIO2_BASE + 0x400 + (off)) -#else -#define MSM_GPIO1_REG(off) (MSM_GPIO1_BASE + 0x800 + (off)) -#define MSM_GPIO2_REG(off) (MSM_GPIO2_BASE + 0xC00 + (off)) -#endif - -#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_MSM7X25) ||\ - defined(CONFIG_ARCH_MSM7X27) - -/* output value */ -#define MSM_GPIO_OUT_0 MSM_GPIO1_REG(0x00) /* gpio 15-0 */ -#define MSM_GPIO_OUT_1 MSM_GPIO2_REG(0x00) /* gpio 42-16 */ -#define MSM_GPIO_OUT_2 MSM_GPIO1_REG(0x04) /* gpio 67-43 */ -#define MSM_GPIO_OUT_3 MSM_GPIO1_REG(0x08) /* gpio 94-68 */ -#define MSM_GPIO_OUT_4 MSM_GPIO1_REG(0x0C) /* gpio 106-95 */ -#define MSM_GPIO_OUT_5 MSM_GPIO1_REG(0x50) /* gpio 107-121 */ - -/* same pin map as above, output enable */ -#define MSM_GPIO_OE_0 MSM_GPIO1_REG(0x10) -#define MSM_GPIO_OE_1 MSM_GPIO2_REG(0x08) -#define MSM_GPIO_OE_2 MSM_GPIO1_REG(0x14) -#define MSM_GPIO_OE_3 MSM_GPIO1_REG(0x18) -#define MSM_GPIO_OE_4 MSM_GPIO1_REG(0x1C) -#define MSM_GPIO_OE_5 MSM_GPIO1_REG(0x54) - -/* same pin map as above, input read */ -#define MSM_GPIO_IN_0 MSM_GPIO1_REG(0x34) -#define MSM_GPIO_IN_1 MSM_GPIO2_REG(0x20) -#define MSM_GPIO_IN_2 MSM_GPIO1_REG(0x38) -#define MSM_GPIO_IN_3 MSM_GPIO1_REG(0x3C) -#define MSM_GPIO_IN_4 MSM_GPIO1_REG(0x40) -#define MSM_GPIO_IN_5 MSM_GPIO1_REG(0x44) - -/* same pin map as above, 1=edge 0=level interrup */ -#define MSM_GPIO_INT_EDGE_0 MSM_GPIO1_REG(0x60) -#define MSM_GPIO_INT_EDGE_1 MSM_GPIO2_REG(0x50) -#define MSM_GPIO_INT_EDGE_2 MSM_GPIO1_REG(0x64) -#define MSM_GPIO_INT_EDGE_3 MSM_GPIO1_REG(0x68) -#define MSM_GPIO_INT_EDGE_4 MSM_GPIO1_REG(0x6C) -#define MSM_GPIO_INT_EDGE_5 MSM_GPIO1_REG(0xC0) - -/* same pin map as above, 1=positive 0=negative */ -#define MSM_GPIO_INT_POS_0 MSM_GPIO1_REG(0x70) -#define MSM_GPIO_INT_POS_1 MSM_GPIO2_REG(0x58) -#define MSM_GPIO_INT_POS_2 MSM_GPIO1_REG(0x74) -#define MSM_GPIO_INT_POS_3 MSM_GPIO1_REG(0x78) -#define MSM_GPIO_INT_POS_4 MSM_GPIO1_REG(0x7C) -#define MSM_GPIO_INT_POS_5 MSM_GPIO1_REG(0xBC) - -/* same pin map as above, interrupt enable */ -#define MSM_GPIO_INT_EN_0 MSM_GPIO1_REG(0x80) -#define MSM_GPIO_INT_EN_1 MSM_GPIO2_REG(0x60) -#define MSM_GPIO_INT_EN_2 MSM_GPIO1_REG(0x84) -#define MSM_GPIO_INT_EN_3 MSM_GPIO1_REG(0x88) -#define MSM_GPIO_INT_EN_4 MSM_GPIO1_REG(0x8C) -#define MSM_GPIO_INT_EN_5 MSM_GPIO1_REG(0xB8) - -/* same pin map as above, write 1 to clear interrupt */ -#define MSM_GPIO_INT_CLEAR_0 MSM_GPIO1_REG(0x90) -#define MSM_GPIO_INT_CLEAR_1 MSM_GPIO2_REG(0x68) -#define MSM_GPIO_INT_CLEAR_2 MSM_GPIO1_REG(0x94) -#define MSM_GPIO_INT_CLEAR_3 MSM_GPIO1_REG(0x98) -#define MSM_GPIO_INT_CLEAR_4 MSM_GPIO1_REG(0x9C) -#define MSM_GPIO_INT_CLEAR_5 MSM_GPIO1_REG(0xB4) - -/* same pin map as above, 1=interrupt pending */ -#define MSM_GPIO_INT_STATUS_0 MSM_GPIO1_REG(0xA0) -#define MSM_GPIO_INT_STATUS_1 MSM_GPIO2_REG(0x70) -#define MSM_GPIO_INT_STATUS_2 MSM_GPIO1_REG(0xA4) -#define MSM_GPIO_INT_STATUS_3 MSM_GPIO1_REG(0xA8) -#define MSM_GPIO_INT_STATUS_4 MSM_GPIO1_REG(0xAC) -#define MSM_GPIO_INT_STATUS_5 MSM_GPIO1_REG(0xB0) - -#endif - -#if defined(CONFIG_ARCH_QSD8X50) -/* output value */ -#define MSM_GPIO_OUT_0 MSM_GPIO1_REG(0x00) /* gpio 15-0 */ -#define MSM_GPIO_OUT_1 MSM_GPIO2_REG(0x00) /* gpio 42-16 */ -#define MSM_GPIO_OUT_2 MSM_GPIO1_REG(0x04) /* gpio 67-43 */ -#define MSM_GPIO_OUT_3 MSM_GPIO1_REG(0x08) /* gpio 94-68 */ -#define MSM_GPIO_OUT_4 MSM_GPIO1_REG(0x0C) /* gpio 103-95 */ -#define MSM_GPIO_OUT_5 MSM_GPIO1_REG(0x10) /* gpio 121-104 */ -#define MSM_GPIO_OUT_6 MSM_GPIO1_REG(0x14) /* gpio 152-122 */ -#define MSM_GPIO_OUT_7 MSM_GPIO1_REG(0x18) /* gpio 164-153 */ - -/* same pin map as above, output enable */ -#define MSM_GPIO_OE_0 MSM_GPIO1_REG(0x20) -#define MSM_GPIO_OE_1 MSM_GPIO2_REG(0x08) -#define MSM_GPIO_OE_2 MSM_GPIO1_REG(0x24) -#define MSM_GPIO_OE_3 MSM_GPIO1_REG(0x28) -#define MSM_GPIO_OE_4 MSM_GPIO1_REG(0x2C) -#define MSM_GPIO_OE_5 MSM_GPIO1_REG(0x30) -#define MSM_GPIO_OE_6 MSM_GPIO1_REG(0x34) -#define MSM_GPIO_OE_7 MSM_GPIO1_REG(0x38) - -/* same pin map as above, input read */ -#define MSM_GPIO_IN_0 MSM_GPIO1_REG(0x50) -#define MSM_GPIO_IN_1 MSM_GPIO2_REG(0x20) -#define MSM_GPIO_IN_2 MSM_GPIO1_REG(0x54) -#define MSM_GPIO_IN_3 MSM_GPIO1_REG(0x58) -#define MSM_GPIO_IN_4 MSM_GPIO1_REG(0x5C) -#define MSM_GPIO_IN_5 MSM_GPIO1_REG(0x60) -#define MSM_GPIO_IN_6 MSM_GPIO1_REG(0x64) -#define MSM_GPIO_IN_7 MSM_GPIO1_REG(0x68) - -/* same pin map as above, 1=edge 0=level interrup */ -#define MSM_GPIO_INT_EDGE_0 MSM_GPIO1_REG(0x70) -#define MSM_GPIO_INT_EDGE_1 MSM_GPIO2_REG(0x50) -#define MSM_GPIO_INT_EDGE_2 MSM_GPIO1_REG(0x74) -#define MSM_GPIO_INT_EDGE_3 MSM_GPIO1_REG(0x78) -#define MSM_GPIO_INT_EDGE_4 MSM_GPIO1_REG(0x7C) -#define MSM_GPIO_INT_EDGE_5 MSM_GPIO1_REG(0x80) -#define MSM_GPIO_INT_EDGE_6 MSM_GPIO1_REG(0x84) -#define MSM_GPIO_INT_EDGE_7 MSM_GPIO1_REG(0x88) - -/* same pin map as above, 1=positive 0=negative */ -#define MSM_GPIO_INT_POS_0 MSM_GPIO1_REG(0x90) -#define MSM_GPIO_INT_POS_1 MSM_GPIO2_REG(0x58) -#define MSM_GPIO_INT_POS_2 MSM_GPIO1_REG(0x94) -#define MSM_GPIO_INT_POS_3 MSM_GPIO1_REG(0x98) -#define MSM_GPIO_INT_POS_4 MSM_GPIO1_REG(0x9C) -#define MSM_GPIO_INT_POS_5 MSM_GPIO1_REG(0xA0) -#define MSM_GPIO_INT_POS_6 MSM_GPIO1_REG(0xA4) -#define MSM_GPIO_INT_POS_7 MSM_GPIO1_REG(0xA8) - -/* same pin map as above, interrupt enable */ -#define MSM_GPIO_INT_EN_0 MSM_GPIO1_REG(0xB0) -#define MSM_GPIO_INT_EN_1 MSM_GPIO2_REG(0x60) -#define MSM_GPIO_INT_EN_2 MSM_GPIO1_REG(0xB4) -#define MSM_GPIO_INT_EN_3 MSM_GPIO1_REG(0xB8) -#define MSM_GPIO_INT_EN_4 MSM_GPIO1_REG(0xBC) -#define MSM_GPIO_INT_EN_5 MSM_GPIO1_REG(0xC0) -#define MSM_GPIO_INT_EN_6 MSM_GPIO1_REG(0xC4) -#define MSM_GPIO_INT_EN_7 MSM_GPIO1_REG(0xC8) - -/* same pin map as above, write 1 to clear interrupt */ -#define MSM_GPIO_INT_CLEAR_0 MSM_GPIO1_REG(0xD0) -#define MSM_GPIO_INT_CLEAR_1 MSM_GPIO2_REG(0x68) -#define MSM_GPIO_INT_CLEAR_2 MSM_GPIO1_REG(0xD4) -#define MSM_GPIO_INT_CLEAR_3 MSM_GPIO1_REG(0xD8) -#define MSM_GPIO_INT_CLEAR_4 MSM_GPIO1_REG(0xDC) -#define MSM_GPIO_INT_CLEAR_5 MSM_GPIO1_REG(0xE0) -#define MSM_GPIO_INT_CLEAR_6 MSM_GPIO1_REG(0xE4) -#define MSM_GPIO_INT_CLEAR_7 MSM_GPIO1_REG(0xE8) - -/* same pin map as above, 1=interrupt pending */ -#define MSM_GPIO_INT_STATUS_0 MSM_GPIO1_REG(0xF0) -#define MSM_GPIO_INT_STATUS_1 MSM_GPIO2_REG(0x70) -#define MSM_GPIO_INT_STATUS_2 MSM_GPIO1_REG(0xF4) -#define MSM_GPIO_INT_STATUS_3 MSM_GPIO1_REG(0xF8) -#define MSM_GPIO_INT_STATUS_4 MSM_GPIO1_REG(0xFC) -#define MSM_GPIO_INT_STATUS_5 MSM_GPIO1_REG(0x100) -#define MSM_GPIO_INT_STATUS_6 MSM_GPIO1_REG(0x104) -#define MSM_GPIO_INT_STATUS_7 MSM_GPIO1_REG(0x108) - -#endif - -#if defined(CONFIG_ARCH_MSM7X30) - -/* output value */ -#define MSM_GPIO_OUT_0 MSM_GPIO1_REG(0x00) /* gpio 15-0 */ -#define MSM_GPIO_OUT_1 MSM_GPIO2_REG(0x00) /* gpio 43-16 */ -#define MSM_GPIO_OUT_2 MSM_GPIO1_REG(0x04) /* gpio 67-44 */ -#define MSM_GPIO_OUT_3 MSM_GPIO1_REG(0x08) /* gpio 94-68 */ -#define MSM_GPIO_OUT_4 MSM_GPIO1_REG(0x0C) /* gpio 106-95 */ -#define MSM_GPIO_OUT_5 MSM_GPIO1_REG(0x50) /* gpio 133-107 */ -#define MSM_GPIO_OUT_6 MSM_GPIO1_REG(0xC4) /* gpio 150-134 */ -#define MSM_GPIO_OUT_7 MSM_GPIO1_REG(0x214) /* gpio 181-151 */ - -/* same pin map as above, output enable */ -#define MSM_GPIO_OE_0 MSM_GPIO1_REG(0x10) -#define MSM_GPIO_OE_1 MSM_GPIO2_REG(0x08) -#define MSM_GPIO_OE_2 MSM_GPIO1_REG(0x14) -#define MSM_GPIO_OE_3 MSM_GPIO1_REG(0x18) -#define MSM_GPIO_OE_4 MSM_GPIO1_REG(0x1C) -#define MSM_GPIO_OE_5 MSM_GPIO1_REG(0x54) -#define MSM_GPIO_OE_6 MSM_GPIO1_REG(0xC8) -#define MSM_GPIO_OE_7 MSM_GPIO1_REG(0x218) - -/* same pin map as above, input read */ -#define MSM_GPIO_IN_0 MSM_GPIO1_REG(0x34) -#define MSM_GPIO_IN_1 MSM_GPIO2_REG(0x20) -#define MSM_GPIO_IN_2 MSM_GPIO1_REG(0x38) -#define MSM_GPIO_IN_3 MSM_GPIO1_REG(0x3C) -#define MSM_GPIO_IN_4 MSM_GPIO1_REG(0x40) -#define MSM_GPIO_IN_5 MSM_GPIO1_REG(0x44) -#define MSM_GPIO_IN_6 MSM_GPIO1_REG(0xCC) -#define MSM_GPIO_IN_7 MSM_GPIO1_REG(0x21C) - -/* same pin map as above, 1=edge 0=level interrup */ -#define MSM_GPIO_INT_EDGE_0 MSM_GPIO1_REG(0x60) -#define MSM_GPIO_INT_EDGE_1 MSM_GPIO2_REG(0x50) -#define MSM_GPIO_INT_EDGE_2 MSM_GPIO1_REG(0x64) -#define MSM_GPIO_INT_EDGE_3 MSM_GPIO1_REG(0x68) -#define MSM_GPIO_INT_EDGE_4 MSM_GPIO1_REG(0x6C) -#define MSM_GPIO_INT_EDGE_5 MSM_GPIO1_REG(0xC0) -#define MSM_GPIO_INT_EDGE_6 MSM_GPIO1_REG(0xD0) -#define MSM_GPIO_INT_EDGE_7 MSM_GPIO1_REG(0x240) - -/* same pin map as above, 1=positive 0=negative */ -#define MSM_GPIO_INT_POS_0 MSM_GPIO1_REG(0x70) -#define MSM_GPIO_INT_POS_1 MSM_GPIO2_REG(0x58) -#define MSM_GPIO_INT_POS_2 MSM_GPIO1_REG(0x74) -#define MSM_GPIO_INT_POS_3 MSM_GPIO1_REG(0x78) -#define MSM_GPIO_INT_POS_4 MSM_GPIO1_REG(0x7C) -#define MSM_GPIO_INT_POS_5 MSM_GPIO1_REG(0xBC) -#define MSM_GPIO_INT_POS_6 MSM_GPIO1_REG(0xD4) -#define MSM_GPIO_INT_POS_7 MSM_GPIO1_REG(0x228) - -/* same pin map as above, interrupt enable */ -#define MSM_GPIO_INT_EN_0 MSM_GPIO1_REG(0x80) -#define MSM_GPIO_INT_EN_1 MSM_GPIO2_REG(0x60) -#define MSM_GPIO_INT_EN_2 MSM_GPIO1_REG(0x84) -#define MSM_GPIO_INT_EN_3 MSM_GPIO1_REG(0x88) -#define MSM_GPIO_INT_EN_4 MSM_GPIO1_REG(0x8C) -#define MSM_GPIO_INT_EN_5 MSM_GPIO1_REG(0xB8) -#define MSM_GPIO_INT_EN_6 MSM_GPIO1_REG(0xD8) -#define MSM_GPIO_INT_EN_7 MSM_GPIO1_REG(0x22C) - -/* same pin map as above, write 1 to clear interrupt */ -#define MSM_GPIO_INT_CLEAR_0 MSM_GPIO1_REG(0x90) -#define MSM_GPIO_INT_CLEAR_1 MSM_GPIO2_REG(0x68) -#define MSM_GPIO_INT_CLEAR_2 MSM_GPIO1_REG(0x94) -#define MSM_GPIO_INT_CLEAR_3 MSM_GPIO1_REG(0x98) -#define MSM_GPIO_INT_CLEAR_4 MSM_GPIO1_REG(0x9C) -#define MSM_GPIO_INT_CLEAR_5 MSM_GPIO1_REG(0xB4) -#define MSM_GPIO_INT_CLEAR_6 MSM_GPIO1_REG(0xDC) -#define MSM_GPIO_INT_CLEAR_7 MSM_GPIO1_REG(0x230) - -/* same pin map as above, 1=interrupt pending */ -#define MSM_GPIO_INT_STATUS_0 MSM_GPIO1_REG(0xA0) -#define MSM_GPIO_INT_STATUS_1 MSM_GPIO2_REG(0x70) -#define MSM_GPIO_INT_STATUS_2 MSM_GPIO1_REG(0xA4) -#define MSM_GPIO_INT_STATUS_3 MSM_GPIO1_REG(0xA8) -#define MSM_GPIO_INT_STATUS_4 MSM_GPIO1_REG(0xAC) -#define MSM_GPIO_INT_STATUS_5 MSM_GPIO1_REG(0xB0) -#define MSM_GPIO_INT_STATUS_6 MSM_GPIO1_REG(0xE0) -#define MSM_GPIO_INT_STATUS_7 MSM_GPIO1_REG(0x234) - -#endif - -#endif diff --git a/arch/arm/mach-msm/gpiomux.h b/arch/arm/mach-msm/gpiomux.h index b178d9cb742f..00459f6ee13c 100644 --- a/arch/arm/mach-msm/gpiomux.h +++ b/arch/arm/mach-msm/gpiomux.h @@ -19,6 +19,7 @@ #include <linux/bitops.h> #include <linux/errno.h> +#include <mach/msm_gpiomux.h> #if defined(CONFIG_MSM_V2_TLMM) #include "gpiomux-v2.h" @@ -71,12 +72,6 @@ enum { */ extern struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS]; -/* Increment a gpio's reference count, possibly activating the line. */ -int __must_check msm_gpiomux_get(unsigned gpio); - -/* Decrement a gpio's reference count, possibly suspending the line. */ -int msm_gpiomux_put(unsigned gpio); - /* Install a new configuration to the gpio line. To avoid overwriting * a configuration, leave the VALID bit out. */ @@ -94,16 +89,6 @@ int msm_gpiomux_write(unsigned gpio, */ void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val); #else -static inline int __must_check msm_gpiomux_get(unsigned gpio) -{ - return -ENOSYS; -} - -static inline int msm_gpiomux_put(unsigned gpio) -{ - return -ENOSYS; -} - static inline int msm_gpiomux_write(unsigned gpio, gpiomux_config_t active, gpiomux_config_t suspended) diff --git a/arch/arm/mach-msm/include/mach/msm_gpiomux.h b/arch/arm/mach-msm/include/mach/msm_gpiomux.h new file mode 100644 index 000000000000..0c7d3936e02f --- /dev/null +++ b/arch/arm/mach-msm/include/mach/msm_gpiomux.h @@ -0,0 +1,38 @@ +/* Copyright (c) 2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _LINUX_MSM_GPIOMUX_H +#define _LINUX_MSM_GPIOMUX_H + +#ifdef CONFIG_MSM_GPIOMUX + +/* Increment a gpio's reference count, possibly activating the line. */ +int __must_check msm_gpiomux_get(unsigned gpio); + +/* Decrement a gpio's reference count, possibly suspending the line. */ +int msm_gpiomux_put(unsigned gpio); + +#else + +static inline int __must_check msm_gpiomux_get(unsigned gpio) +{ + return -ENOSYS; +} + +static inline int msm_gpiomux_put(unsigned gpio) +{ + return -ENOSYS; +} + +#endif + +#endif /* _LINUX_MSM_GPIOMUX_H */ diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h index 8f99d97615a0..94fe9fe6feb3 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h @@ -55,13 +55,11 @@ #define MSM_DMOV_PHYS 0xA9700000 #define MSM_DMOV_SIZE SZ_4K -#define MSM_GPIO1_BASE IOMEM(0xE0003000) -#define MSM_GPIO1_PHYS 0xA9200000 -#define MSM_GPIO1_SIZE SZ_4K +#define MSM7X00_GPIO1_PHYS 0xA9200000 +#define MSM7X00_GPIO1_SIZE SZ_4K -#define MSM_GPIO2_BASE IOMEM(0xE0004000) -#define MSM_GPIO2_PHYS 0xA9300000 -#define MSM_GPIO2_SIZE SZ_4K +#define MSM7X00_GPIO2_PHYS 0xA9300000 +#define MSM7X00_GPIO2_SIZE SZ_4K #define MSM_CLK_CTL_BASE IOMEM(0xE0005000) #define MSM_CLK_CTL_PHYS 0xA8600000 diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h index 4d84be15955e..37694442d1bd 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h @@ -46,13 +46,11 @@ #define MSM_DMOV_PHYS 0xAC400000 #define MSM_DMOV_SIZE SZ_4K -#define MSM_GPIO1_BASE IOMEM(0xE0003000) -#define MSM_GPIO1_PHYS 0xAC001000 -#define MSM_GPIO1_SIZE SZ_4K +#define MSM7X30_GPIO1_PHYS 0xAC001000 +#define MSM7X30_GPIO1_SIZE SZ_4K -#define MSM_GPIO2_BASE IOMEM(0xE0004000) -#define MSM_GPIO2_PHYS 0xAC101000 -#define MSM_GPIO2_SIZE SZ_4K +#define MSM7X30_GPIO2_PHYS 0xAC101000 +#define MSM7X30_GPIO2_SIZE SZ_4K #define MSM_CLK_CTL_BASE IOMEM(0xE0005000) #define MSM_CLK_CTL_PHYS 0xAB800000 diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h index d4143201999f..d67cd73316f4 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h @@ -46,13 +46,11 @@ #define MSM_DMOV_PHYS 0xA9700000 #define MSM_DMOV_SIZE SZ_4K -#define MSM_GPIO1_BASE IOMEM(0xE0003000) -#define MSM_GPIO1_PHYS 0xA9000000 -#define MSM_GPIO1_SIZE SZ_4K +#define QSD8X50_GPIO1_PHYS 0xA9000000 +#define QSD8X50_GPIO1_SIZE SZ_4K -#define MSM_GPIO2_BASE IOMEM(0xE0004000) -#define MSM_GPIO2_PHYS 0xA9100000 -#define MSM_GPIO2_SIZE SZ_4K +#define QSD8X50_GPIO2_PHYS 0xA9100000 +#define QSD8X50_GPIO2_SIZE SZ_4K #define MSM_CLK_CTL_BASE IOMEM(0xE0005000) #define MSM_CLK_CTL_PHYS 0xA8600000 diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h index 2f494b6a9d0a..4ded15238b60 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap.h @@ -61,5 +61,7 @@ #define MSM_QGIC_CPU_BASE IOMEM(0xF0001000) #define MSM_TMR_BASE IOMEM(0xF0200000) #define MSM_TMR0_BASE IOMEM(0xF0201000) +#define MSM_GPIO1_BASE IOMEM(0xE0003000) +#define MSM_GPIO2_BASE IOMEM(0xE0004000) #endif diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index cec6ed1c91d3..140ddbbc3a8a 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -43,8 +43,8 @@ static struct map_desc msm_io_desc[] __initdata = { MSM_DEVICE(VIC), MSM_CHIP_DEVICE(CSR, MSM7X00), MSM_DEVICE(DMOV), - MSM_DEVICE(GPIO1), - MSM_DEVICE(GPIO2), + MSM_CHIP_DEVICE(GPIO1, MSM7X00), + MSM_CHIP_DEVICE(GPIO2, MSM7X00), MSM_DEVICE(CLK_CTL), #ifdef CONFIG_MSM_DEBUG_UART MSM_DEVICE(DEBUG_UART), @@ -76,8 +76,8 @@ static struct map_desc qsd8x50_io_desc[] __initdata = { MSM_DEVICE(VIC), MSM_CHIP_DEVICE(CSR, QSD8X50), MSM_DEVICE(DMOV), - MSM_DEVICE(GPIO1), - MSM_DEVICE(GPIO2), + MSM_CHIP_DEVICE(GPIO1, QSD8X50), + MSM_CHIP_DEVICE(GPIO2, QSD8X50), MSM_DEVICE(CLK_CTL), MSM_DEVICE(SIRC), MSM_DEVICE(SCPLL), @@ -135,8 +135,8 @@ static struct map_desc msm7x30_io_desc[] __initdata = { MSM_DEVICE(VIC), MSM_CHIP_DEVICE(CSR, MSM7X30), MSM_DEVICE(DMOV), - MSM_DEVICE(GPIO1), - MSM_DEVICE(GPIO2), + MSM_CHIP_DEVICE(GPIO1, MSM7X30), + MSM_CHIP_DEVICE(GPIO2, MSM7X30), MSM_DEVICE(CLK_CTL), MSM_DEVICE(CLK_CTL_SH2), MSM_DEVICE(AD5), diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c index d6336afe9948..c51af1cac300 100644 --- a/arch/arm/mach-mv78xx0/pcie.c +++ b/arch/arm/mach-mv78xx0/pcie.c @@ -260,7 +260,8 @@ mv78xx0_pcie_scan_bus(int nr, struct pci_sys_data *sys) return bus; } -static int __init mv78xx0_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init mv78xx0_pcie_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { struct pcie_port *pp = bus_to_port(dev->bus->number); diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index 7c893fa70266..68934ea8725a 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000), - .irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO), + .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO), .irqflags = IRQF_TRIGGER_HIGH, .uartclk = CPUIMX51_QUART_XTAL, .regshift = CPUIMX51_QUART_REGSHIFT, diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 15c600026aee..11b0ff67f89d 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -41,8 +41,6 @@ #define BABBAGE_POWER_KEY IMX_GPIO_NR(2, 21) #define BABBAGE_ECSPI1_CS0 IMX_GPIO_NR(4, 24) #define BABBAGE_ECSPI1_CS1 IMX_GPIO_NR(4, 25) -#define BABBAGE_SD1_CD IMX_GPIO_NR(1, 0) -#define BABBAGE_SD1_WP IMX_GPIO_NR(1, 1) #define BABBAGE_SD2_CD IMX_GPIO_NR(1, 6) #define BABBAGE_SD2_WP IMX_GPIO_NR(1, 5) @@ -146,8 +144,9 @@ static iomux_v3_cfg_t mx51babbage_pads[] = { MX51_PAD_SD1_DATA1__SD1_DATA1, MX51_PAD_SD1_DATA2__SD1_DATA2, MX51_PAD_SD1_DATA3__SD1_DATA3, - MX51_PAD_GPIO1_0__GPIO1_0, - MX51_PAD_GPIO1_1__GPIO1_1, + /* CD/WP from controller */ + MX51_PAD_GPIO1_0__SD1_CD, + MX51_PAD_GPIO1_1__SD1_WP, /* SD 2 */ MX51_PAD_SD2_CMD__SD2_CMD, @@ -156,6 +155,7 @@ static iomux_v3_cfg_t mx51babbage_pads[] = { MX51_PAD_SD2_DATA1__SD2_DATA1, MX51_PAD_SD2_DATA2__SD2_DATA2, MX51_PAD_SD2_DATA3__SD2_DATA3, + /* CD/WP gpio */ MX51_PAD_GPIO1_6__GPIO1_6, MX51_PAD_GPIO1_5__GPIO1_5, @@ -340,13 +340,15 @@ static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = { }; static const struct esdhc_platform_data mx51_babbage_sd1_data __initconst = { - .cd_gpio = BABBAGE_SD1_CD, - .wp_gpio = BABBAGE_SD1_WP, + .cd_type = ESDHC_CD_CONTROLLER, + .wp_type = ESDHC_WP_CONTROLLER, }; static const struct esdhc_platform_data mx51_babbage_sd2_data __initconst = { .cd_gpio = BABBAGE_SD2_CD, .wp_gpio = BABBAGE_SD2_WP, + .cd_type = ESDHC_CD_GPIO, + .wp_type = ESDHC_WP_GPIO, }; /* @@ -367,7 +369,7 @@ static void __init mx51_babbage_init(void) ARRAY_SIZE(mx51babbage_pads)); imx51_add_imx_uart(0, &uart_pdata); - imx51_add_imx_uart(1, &uart_pdata); + imx51_add_imx_uart(1, NULL); imx51_add_imx_uart(2, &uart_pdata); babbage_fec_reset(); diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index f70700dc0ec1..551daf85ff8c 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -108,9 +108,9 @@ static void __init mx51_efikamx_board_id(void) gpio_request(EFIKAMX_PCBID2, "pcbid2"); gpio_direction_input(EFIKAMX_PCBID2); - id = gpio_get_value(EFIKAMX_PCBID0); - id |= gpio_get_value(EFIKAMX_PCBID1) << 1; - id |= gpio_get_value(EFIKAMX_PCBID2) << 2; + id = gpio_get_value(EFIKAMX_PCBID0) ? 1 : 0; + id |= (gpio_get_value(EFIKAMX_PCBID1) ? 1 : 0) << 1; + id |= (gpio_get_value(EFIKAMX_PCBID2) ? 1 : 0) << 2; switch (id) { case 7: diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c index 2e4d9d32a87c..8a9bca22beb5 100644 --- a/arch/arm/mach-mx5/board-mx51_efikasb.c +++ b/arch/arm/mach-mx5/board-mx51_efikasb.c @@ -156,23 +156,24 @@ static struct gpio_keys_button mx51_efikasb_keys[] = { { .code = KEY_POWER, .gpio = EFIKASB_PWRKEY, - .type = EV_PWR, + .type = EV_KEY, .desc = "Power Button", .wakeup = 1, - .debounce_interval = 10, /* ms */ + .active_low = 1, }, { .code = SW_LID, .gpio = EFIKASB_LID, .type = EV_SW, .desc = "Lid Switch", + .active_low = 1, }, { - /* SW_RFKILLALL vs KEY_RFKILL ? */ - .code = SW_RFKILL_ALL, + .code = KEY_RFKILL, .gpio = EFIKASB_RFKILL, - .type = EV_SW, + .type = EV_KEY, .desc = "rfkill", + .active_low = 1, }, }; @@ -224,8 +225,8 @@ static void __init mx51_efikasb_board_id(void) gpio_request(EFIKASB_PCBID1, "pcb id1"); gpio_direction_input(EFIKASB_PCBID1); - id = gpio_get_value(EFIKASB_PCBID0); - id |= gpio_get_value(EFIKASB_PCBID1) << 1; + id = gpio_get_value(EFIKASB_PCBID0) ? 1 : 0; + id |= (gpio_get_value(EFIKASB_PCBID1) ? 1 : 0) << 1; switch (id) { default: diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 54be525e2bd7..4e1d51d252dc 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -210,11 +210,15 @@ static const struct gpio_keys_platform_data loco_button_data __initconst = { static const struct esdhc_platform_data mx53_loco_sd1_data __initconst = { .cd_gpio = LOCO_SD1_CD, + .cd_type = ESDHC_CD_GPIO, + .wp_type = ESDHC_WP_NONE, }; static const struct esdhc_platform_data mx53_loco_sd3_data __initconst = { .cd_gpio = LOCO_SD3_CD, .wp_gpio = LOCO_SD3_WP, + .cd_type = ESDHC_CD_GPIO, + .wp_type = ESDHC_WP_GPIO, }; static inline void mx53_loco_fec_reset(void) diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c index 23cd809fa8b8..f7bf996f463b 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c @@ -271,7 +271,11 @@ static int _clk_pll_enable(struct clk *clk) int i = 0; pllbase = _get_pll_base(clk); - reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN; + reg = __raw_readl(pllbase + MXC_PLL_DP_CTL); + if (reg & MXC_PLL_DP_CTL_UPEN) + return 0; + + reg |= MXC_PLL_DP_CTL_UPEN; __raw_writel(reg, pllbase + MXC_PLL_DP_CTL); /* Wait for lock */ @@ -1422,11 +1426,13 @@ DEFINE_CLOCK(ipu_di1_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG6_OFFSET, }, static struct clk_lookup mx51_lookups[] = { - _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) - _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) - _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) + /* i.mx51 has the i.mx21 type uart */ + _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk) + _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk) + _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk) _REGISTER_CLOCK(NULL, "gpt", gpt_clk) - _REGISTER_CLOCK("fec.0", NULL, fec_clk) + /* i.mx51 has the i.mx27 type fec */ + _REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk) _REGISTER_CLOCK("mxc_pwm.0", "pwm", pwm1_clk) _REGISTER_CLOCK("mxc_pwm.1", "pwm", pwm2_clk) _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk) @@ -1446,7 +1452,8 @@ static struct clk_lookup mx51_lookups[] = { _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) _REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk) - _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk) + /* i.mx51 has the i.mx35 type sdma */ + _REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk) _REGISTER_CLOCK(NULL, "ckih", ckih_clk) _REGISTER_CLOCK(NULL, "ckih2", ckih2_clk) _REGISTER_CLOCK(NULL, "gpt_32k", gpt_32k_clk) @@ -1454,10 +1461,10 @@ static struct clk_lookup mx51_lookups[] = { _REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk) /* i.mx51 has the i.mx35 type cspi */ _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.3", NULL, esdhc4_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx51.0", NULL, esdhc1_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx51.1", NULL, esdhc2_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx51.2", NULL, esdhc3_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx51.3", NULL, esdhc4_clk) _REGISTER_CLOCK(NULL, "cpu_clk", cpu_clk) _REGISTER_CLOCK(NULL, "iim_clk", iim_clk) _REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk) @@ -1470,29 +1477,32 @@ static struct clk_lookup mx51_lookups[] = { }; static struct clk_lookup mx53_lookups[] = { - _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) - _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) - _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) - _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk) - _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk) + /* i.mx53 has the i.mx21 type uart */ + _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk) + _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk) + _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk) + _REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk) + _REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk) _REGISTER_CLOCK(NULL, "gpt", gpt_clk) - _REGISTER_CLOCK("fec.0", NULL, fec_clk) + /* i.mx53 has the i.mx25 type fec */ + _REGISTER_CLOCK("imx25-fec.0", NULL, fec_clk) _REGISTER_CLOCK(NULL, "iim_clk", iim_clk) _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk) _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk) _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_mx53_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_mx53_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_mx53_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.3", NULL, esdhc4_mx53_clk) /* i.mx53 has the i.mx51 type ecspi */ _REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk) _REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk) /* i.mx53 has the i.mx25 type cspi */ _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx53.0", NULL, esdhc1_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx53.1", NULL, esdhc2_mx53_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx53.2", NULL, esdhc3_mx53_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx53.3", NULL, esdhc4_mx53_clk) _REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk) _REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk) - _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk) + /* i.mx53 has the i.mx35 type sdma */ + _REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk) _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) _REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk) diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c index ef8aec9319b6..baea6e5cddd9 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-mx5/mm.c @@ -115,7 +115,6 @@ static struct sdma_script_start_addrs imx51_sdma_script __initdata = { }; static struct sdma_platform_data imx51_sdma_pdata __initdata = { - .sdma_version = 2, .fw_name = "sdma-imx51.bin", .script_addrs = &imx51_sdma_script, }; @@ -135,7 +134,6 @@ static struct sdma_script_start_addrs imx53_sdma_script __initdata = { }; static struct sdma_platform_data imx53_sdma_pdata __initdata = { - .sdma_version = 2, .fw_name = "sdma-imx53.bin", .script_addrs = &imx53_sdma_script, }; @@ -148,7 +146,8 @@ void __init imx51_soc_init(void) mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH); mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH); - imx_add_imx_sdma(MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata); + /* i.mx51 has the i.mx35 type sdma */ + imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata); } void __init imx53_soc_init(void) @@ -162,5 +161,6 @@ void __init imx53_soc_init(void) mxc_register_gpio("imx31-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH); mxc_register_gpio("imx31-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH); - imx_add_imx_sdma(MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata); + /* i.mx53 has the i.mx35 type sdma */ + imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata); } diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c index 56739c23aca7..c9209454807a 100644 --- a/arch/arm/mach-mx5/mx51_efika.c +++ b/arch/arm/mach-mx5/mx51_efika.c @@ -186,7 +186,7 @@ static int initialize_usbh1_port(struct platform_device *pdev) mdelay(10); - return mx51_initialize_usb_hw(0, MXC_EHCI_ITC_NO_THRESHOLD); + return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD); } static struct mxc_usbh_platform_data usbh1_config = { @@ -260,8 +260,8 @@ static struct regulator_consumer_supply vvideo_consumers[] = { }; static struct regulator_consumer_supply vsd_consumers[] = { - REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx.0"), - REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx.1"), + REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.0"), + REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.1"), }; static struct regulator_consumer_supply pwgt1_consumer[] = { diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 4ae6257b39a4..57b66d590c52 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -7,7 +7,6 @@ config ARCH_OMAP2PLUS_TYPICAL default y select AEABI select REGULATOR - select PM select PM_RUNTIME select VFP select NEON if ARCH_OMAP3 || ARCH_OMAP4 diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 5f2b55ff04ff..933e9353cb37 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -45,8 +45,6 @@ static struct omap_board_config_kernel am3517_crane_config[] __initdata = { static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; -#else -#define board_mux NULL #endif static void __init am3517_crane_init_early(void) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 32f5f895568a..3ae16b4e3f52 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -491,23 +491,22 @@ static void __init beagle_opp_init(void) /* Custom OPP enabled for all xM versions */ if (cpu_is_omap3630()) { - struct omap_hwmod *mh = omap_hwmod_lookup("mpu"); - struct omap_hwmod *dh = omap_hwmod_lookup("iva"); - struct device *dev; + struct device *mpu_dev, *iva_dev; - if (!mh || !dh) { + mpu_dev = omap2_get_mpuss_device(); + iva_dev = omap2_get_iva_device(); + + if (!mpu_dev || !iva_dev) { pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n", - __func__, mh, dh); + __func__, mpu_dev, iva_dev); return; } /* Enable MPU 1GHz and lower opps */ - dev = &mh->od->pdev.dev; - r = opp_enable(dev, 800000000); + r = opp_enable(mpu_dev, 800000000); /* TODO: MPU 1GHz needs SR and ABB */ /* Enable IVA 800MHz and lower opps */ - dev = &dh->od->pdev.dev; - r |= opp_enable(dev, 660000000); + r |= opp_enable(iva_dev, 660000000); /* TODO: DSP 800MHz needs SR and ABB */ if (r) { pr_err("%s: failed to enable higher opp %d\n", @@ -516,10 +515,8 @@ static void __init beagle_opp_init(void) * Cleanup - disable the higher freqs - we dont care * about the results */ - dev = &mh->od->pdev.dev; - opp_disable(dev, 800000000); - dev = &dh->od->pdev.dev; - opp_disable(dev, 660000000); + opp_disable(mpu_dev, 800000000); + opp_disable(iva_dev, 660000000); } } return; diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index cc503aa89c5e..5a886cd2c598 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -418,6 +418,10 @@ static struct regulator_consumer_supply rx51_vmmc1_supply[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; +static struct regulator_consumer_supply rx51_vaux2_supply[] = { + REGULATOR_SUPPLY("vdds_csib", "omap3isp"), +}; + static struct regulator_consumer_supply rx51_vaux3_supply[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), }; @@ -479,6 +483,8 @@ static struct regulator_init_data rx51_vaux2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(rx51_vaux2_supply), + .consumer_supplies = rx51_vaux2_supply, }; /* VAUX3 - adds more power to VIO_18 rail */ diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index ffd55b1c4396..b9b844683147 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3078,6 +3078,7 @@ static struct clk gpt12_fck = { .name = "gpt12_fck", .ops = &clkops_null, .parent = &secure_32k_fck, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -3085,6 +3086,7 @@ static struct clk wdt1_fck = { .name = "wdt1_fck", .ops = &clkops_null, .parent = &secure_32k_fck, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 2af0e3f00ce1..c0b6fbda3408 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3376,10 +3376,18 @@ int __init omap4xxx_clk_init(void) } else if (cpu_is_omap446x()) { cpu_mask = RATE_IN_4460; cpu_clkflg = CK_446X; + } else { + return 0; } clk_init(&omap2_clk_functions); - omap2_clk_disable_clkdm_control(); + + /* + * Must stay commented until all OMAP SoC drivers are + * converted to runtime PM, or drivers may start crashing + * + * omap2_clk_disable_clkdm_control(); + */ for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks); c++) diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index ab7db083f97f..8f0890685d7b 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -747,6 +747,7 @@ int clkdm_wakeup(struct clockdomain *clkdm) spin_lock_irqsave(&clkdm->lock, flags); clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED; ret = arch_clkdm->clkdm_wakeup(clkdm); + ret |= pwrdm_state_switch(clkdm->pwrdm.ptr); spin_unlock_irqrestore(&clkdm->lock, flags); return ret; } @@ -818,6 +819,7 @@ void clkdm_deny_idle(struct clockdomain *clkdm) spin_lock_irqsave(&clkdm->lock, flags); clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED; arch_clkdm->clkdm_deny_idle(clkdm); + pwrdm_state_switch(clkdm->pwrdm.ptr); spin_unlock_irqrestore(&clkdm->lock, flags); } diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h index f2ea6453ade0..a018a7327879 100644 --- a/arch/arm/mach-omap2/cminst44xx.h +++ b/arch/arm/mach-omap2/cminst44xx.h @@ -18,13 +18,36 @@ extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs); extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs); extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); -extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); + +# ifdef CONFIG_ARCH_OMAP4 +extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs); extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); +# else + +static inline int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ + return 0; +} + +static inline void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, + s16 cdoffs, u16 clkctrl_offs) +{ +} + +static inline void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ +} + +# endif + /* * In an ideal world, we would not export these low-level functions, * but this will probably take some time to fix properly diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 543fcb8b518c..a5b7a236aa5b 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -25,6 +25,7 @@ #include <video/omapdss.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> +#include <plat/omap-pm.h> static struct platform_device omap_display_device = { .name = "omapdss", @@ -42,20 +43,6 @@ static struct omap_device_pm_latency omap_dss_latency[] = { }, }; -/* oh_core is used for getting opt-clocks */ -static struct omap_hwmod *oh_core; - -static bool opt_clock_available(const char *clk_role) -{ - int i; - - for (i = 0; i < oh_core->opt_clks_cnt; i++) { - if (!strcmp(oh_core->opt_clks[i].role, clk_role)) - return true; - } - return false; -} - struct omap_dss_hwmod_data { const char *oh_name; const char *dev_name; @@ -109,16 +96,9 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) oh_count = ARRAY_SIZE(omap4_dss_hwmod_data); } - /* opt_clks are always associated with dss hwmod */ - oh_core = omap_hwmod_lookup("dss_core"); - if (!oh_core) { - pr_err("Could not look up dss_core.\n"); - return -ENODEV; - } - pdata.board_data = board_data; - pdata.board_data->get_last_off_on_transaction_id = NULL; - pdata.opt_clock_available = opt_clock_available; + pdata.board_data->get_context_loss_count = + omap_pm_get_dev_context_loss_count; for (i = 0; i < oh_count; i++) { oh = omap_hwmod_lookup(curr_dss_hwmod[i].oh_name); diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index c7fb22abc219..655e9480eb98 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -821,11 +821,10 @@ static void __init omap_mux_set_cmdline_signals(void) if (!omap_mux_options) return; - options = kmalloc(strlen(omap_mux_options) + 1, GFP_KERNEL); + options = kstrdup(omap_mux_options, GFP_KERNEL); if (!options) return; - strcpy(options, omap_mux_options); next_opt = options; while ((token = strsep(&next_opt, ",")) != NULL) { @@ -855,24 +854,19 @@ static int __init omap_mux_copy_names(struct omap_mux *src, for (i = 0; i < OMAP_MUX_NR_MODES; i++) { if (src->muxnames[i]) { - dst->muxnames[i] = - kmalloc(strlen(src->muxnames[i]) + 1, - GFP_KERNEL); + dst->muxnames[i] = kstrdup(src->muxnames[i], + GFP_KERNEL); if (!dst->muxnames[i]) goto free; - strcpy(dst->muxnames[i], src->muxnames[i]); } } #ifdef CONFIG_DEBUG_FS for (i = 0; i < OMAP_MUX_NR_SIDES; i++) { if (src->balls[i]) { - dst->balls[i] = - kmalloc(strlen(src->balls[i]) + 1, - GFP_KERNEL); + dst->balls[i] = kstrdup(src->balls[i], GFP_KERNEL); if (!dst->balls[i]) goto free; - strcpy(dst->balls[i], src->balls[i]); } } #endif diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 16743c7d6e8e..408193d8e044 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -192,6 +192,7 @@ static struct omap_hwmod_addr_space omap2430_usbhsotg_addrs[] = { .pa_end = OMAP243X_HS_BASE + SZ_4K - 1, .flags = ADDR_TYPE_RT }, + { } }; /* l4_core ->usbhsotg interface */ diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 3feb35911a32..472bf22d5e84 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -130,7 +130,6 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) } else { hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]); clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); - pwrdm_wait_transition(pwrdm); sleep_switch = FORCEWAKEUP_SWITCH; } } @@ -156,7 +155,6 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) return ret; } - pwrdm_wait_transition(pwrdm); pwrdm_state_switch(pwrdm); err: return ret; diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 9af08473bf10..ef71fdd40fc4 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -195,28 +195,35 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused) /** * pwrdm_init - set up the powerdomain layer - * @pwrdm_list: array of struct powerdomain pointers to register + * @pwrdms: array of struct powerdomain pointers to register * @custom_funcs: func pointers for arch specific implementations * - * Loop through the array of powerdomains @pwrdm_list, registering all - * that are available on the current CPU. If pwrdm_list is supplied - * and not null, all of the referenced powerdomains will be - * registered. No return value. XXX pwrdm_list is not really a - * "list"; it is an array. Rename appropriately. + * Loop through the array of powerdomains @pwrdms, registering all + * that are available on the current CPU. Also, program all + * powerdomain target state as ON; this is to prevent domains from + * hitting low power states (if bootloader has target states set to + * something other than ON) and potentially even losing context while + * PM is not fully initialized. The PM late init code can then program + * the desired target state for all the power domains. No return + * value. */ -void pwrdm_init(struct powerdomain **pwrdm_list, struct pwrdm_ops *custom_funcs) +void pwrdm_init(struct powerdomain **pwrdms, struct pwrdm_ops *custom_funcs) { struct powerdomain **p = NULL; + struct powerdomain *temp_p; if (!custom_funcs) WARN(1, "powerdomain: No custom pwrdm functions registered\n"); else arch_pwrdm = custom_funcs; - if (pwrdm_list) { - for (p = pwrdm_list; *p; p++) + if (pwrdms) { + for (p = pwrdms; *p; p++) _pwrdm_register(*p); } + + list_for_each_entry(temp_p, &pwrdm_list, node) + pwrdm_set_next_pwrst(temp_p, PWRDM_POWER_ON); } /** diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 2ce2fb7664bc..34c01a7de810 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -621,7 +621,7 @@ void sr_disable(struct voltagedomain *voltdm) sr_v2_disable(sr); } - pm_runtime_put_sync(&sr->pdev->dev); + pm_runtime_put_sync_suspend(&sr->pdev->dev); } /** @@ -860,6 +860,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); pm_runtime_enable(&pdev->dev); + pm_runtime_irq_safe(&pdev->dev); sr_info->pdev = pdev; sr_info->srid = pdev->id; diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index e9640728239b..cf1de7d2630d 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -293,7 +293,8 @@ static void __init omap2_gp_clocksource_init(int gptimer_id, pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n", gptimer_id, clksrc.rate); - __omap_dm_timer_load_start(clksrc.io_base, OMAP_TIMER_CTRL_ST, 0, 1); + __omap_dm_timer_load_start(clksrc.io_base, + OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1); init_sched_clock(&cd, dmtimer_update_sched_clock, 32, clksrc.rate); if (clocksource_register_hz(&clocksource_gpt, clksrc.rate)) diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 2543342dbccb..daa056ed8738 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -48,14 +48,7 @@ void __init omap_pmic_init(int bus, u32 clkrate, omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); } -static struct twl4030_usb_data omap4_usb_pdata = { - .phy_init = omap4430_phy_init, - .phy_exit = omap4430_phy_exit, - .phy_power = omap4430_phy_power, - .phy_set_clock = omap4430_phy_set_clk, - .phy_suspend = omap4430_phy_suspend, -}; - +#if defined(CONFIG_ARCH_OMAP3) static struct twl4030_usb_data omap3_usb_pdata = { .usb_mode = T2_USB_MODE_ULPI, }; @@ -122,6 +115,45 @@ static struct regulator_init_data omap3_vpll2_idata = { .consumer_supplies = omap3_vpll2_supplies, }; +void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, + u32 pdata_flags, u32 regulators_flags) +{ + if (!pmic_data->irq_base) + pmic_data->irq_base = TWL4030_IRQ_BASE; + if (!pmic_data->irq_end) + pmic_data->irq_end = TWL4030_IRQ_END; + + /* Common platform data configurations */ + if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb) + pmic_data->usb = &omap3_usb_pdata; + + if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci) + pmic_data->bci = &omap3_bci_pdata; + + if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc) + pmic_data->madc = &omap3_madc_pdata; + + if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->audio) + pmic_data->audio = &omap3_audio_pdata; + + /* Common regulator configurations */ + if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac) + pmic_data->vdac = &omap3_vdac_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2) + pmic_data->vpll2 = &omap3_vpll2_idata; +} +#endif /* CONFIG_ARCH_OMAP3 */ + +#if defined(CONFIG_ARCH_OMAP4) +static struct twl4030_usb_data omap4_usb_pdata = { + .phy_init = omap4430_phy_init, + .phy_exit = omap4430_phy_exit, + .phy_power = omap4430_phy_power, + .phy_set_clock = omap4430_phy_set_clk, + .phy_suspend = omap4430_phy_suspend, +}; + static struct regulator_init_data omap4_vdac_idata = { .constraints = { .min_uV = 1800000, @@ -273,32 +305,4 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, !pmic_data->clk32kg) pmic_data->clk32kg = &omap4_clk32kg_idata; } - -void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, - u32 pdata_flags, u32 regulators_flags) -{ - if (!pmic_data->irq_base) - pmic_data->irq_base = TWL4030_IRQ_BASE; - if (!pmic_data->irq_end) - pmic_data->irq_end = TWL4030_IRQ_END; - - /* Common platform data configurations */ - if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb) - pmic_data->usb = &omap3_usb_pdata; - - if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci) - pmic_data->bci = &omap3_bci_pdata; - - if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc) - pmic_data->madc = &omap3_madc_pdata; - - if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->audio) - pmic_data->audio = &omap3_audio_pdata; - - /* Common regulator configurations */ - if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac) - pmic_data->vdac = &omap3_vdac_idata; - - if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2) - pmic_data->vpll2 = &omap3_vpll2_idata; -} +#endif /* CONFIG_ARCH_OMAP4 */ diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index f2b2b35e8646..3e5499dda49a 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -51,7 +51,7 @@ void orion5x_pci_disable(void); void orion5x_pci_set_cardbus_mode(void); int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys); struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); -int orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin); +int orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); struct machine_desc; struct meminfo; diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index f95d3cb01cbf..a3e3e9e5e328 100644 --- a/arch/arm/mach-orion5x/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -237,7 +237,8 @@ void __init db88f5281_pci_preinit(void) } } -static int __init db88f5281_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init db88f5281_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { int irq; diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 855e0e77d563..c105556a0ee1 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -70,7 +70,7 @@ enum { * PCI setup */ -static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init dns323_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index c0eb6462633f..00381249d766 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -119,7 +119,8 @@ static struct platform_device kurobox_pro_nor_flash = { * PCI ****************************************************************************/ -static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init kurobox_pro_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { int irq; diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c index 59263b73d1e4..ef3bb8e9a4c2 100644 --- a/arch/arm/mach-orion5x/mss2-setup.c +++ b/arch/arm/mach-orion5x/mss2-setup.c @@ -73,7 +73,7 @@ static struct platform_device mss2_nor_flash = { /**************************************************************************** * PCI setup ****************************************************************************/ -static int __init mss2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index f64965d4f8e8..bc4a920e26ee 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -14,6 +14,7 @@ #include <linux/pci.h> #include <linux/slab.h> #include <linux/mbus.h> +#include <video/vga.h> #include <asm/irq.h> #include <asm/mach/pci.h> #include <plat/pcie.h> @@ -589,7 +590,7 @@ struct pci_bus __init *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys return bus; } -int __init orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int bus = dev->bus->number; diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c index 9eec7c2375e9..291d22bf44c9 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c @@ -131,7 +131,7 @@ static void __init rd88f5181l_fxo_init(void) } static int __init -rd88f5181l_fxo_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +rd88f5181l_fxo_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c index 0cc90bbfd326..3f02362e1632 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c @@ -140,7 +140,7 @@ static void __init rd88f5181l_ge_init(void) } static int __init -rd88f5181l_ge_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +rd88f5181l_ge_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index 48da39b9bdb0..27fd38e658bd 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -172,7 +172,8 @@ void __init rd88f5182_pci_preinit(void) } } -static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init rd88f5182_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { int irq; diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c index 29ce826c3c21..a34e4fac72b0 100644 --- a/arch/arm/mach-orion5x/terastation_pro2-setup.c +++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c @@ -100,7 +100,7 @@ void __init tsp2_pci_preinit(void) } } -static int __init tsp2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init tsp2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index 47162fd5f044..c9831614e355 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -143,7 +143,8 @@ void __init qnap_ts209_pci_preinit(void) } } -static int __init qnap_ts209_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init qnap_ts209_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { int irq; diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index 5aacc7ac5cf4..cc33b2222bad 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -121,7 +121,8 @@ static struct platform_device qnap_ts409_nor_flash = { * PCI ****************************************************************************/ -static int __init qnap_ts409_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init qnap_ts409_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { int irq; diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c index 444a1c7fdfd6..2653595f901c 100644 --- a/arch/arm/mach-orion5x/wnr854t-setup.c +++ b/arch/arm/mach-orion5x/wnr854t-setup.c @@ -133,7 +133,8 @@ static void __init wnr854t_init(void) platform_device_register(&wnr854t_nor_flash); } -static int __init wnr854t_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init wnr854t_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { int irq; diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index d1952be0ae1c..251ef1543e53 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -221,7 +221,8 @@ static void __init wrt350n_v2_init(void) platform_device_register(&wrt350n_v2_button_device); } -static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init wrt350n_v2_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { int irq; diff --git a/arch/arm/mach-prima2/clock.c b/arch/arm/mach-prima2/clock.c index f9a2aaf63f71..615a4e75ceab 100644 --- a/arch/arm/mach-prima2/clock.c +++ b/arch/arm/mach-prima2/clock.c @@ -481,6 +481,7 @@ static void __init sirfsoc_clk_init(void) static struct of_device_id clkc_ids[] = { { .compatible = "sirf,prima2-clkc" }, + {}, }; void __init sirfsoc_of_clk_init(void) diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c index c3404cbb6ff7..7af254d046ba 100644 --- a/arch/arm/mach-prima2/irq.c +++ b/arch/arm/mach-prima2/irq.c @@ -51,6 +51,7 @@ static __init void sirfsoc_irq_init(void) static struct of_device_id intc_ids[] = { { .compatible = "sirf,prima2-intc" }, + {}, }; void __init sirfsoc_of_irq_init(void) diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c index d074786e83d4..492cfa8d2610 100644 --- a/arch/arm/mach-prima2/rstc.c +++ b/arch/arm/mach-prima2/rstc.c @@ -19,6 +19,7 @@ static DEFINE_MUTEX(rstc_lock); static struct of_device_id rstc_ids[] = { { .compatible = "sirf,prima2-rstc" }, + {}, }; static int __init sirfsoc_of_rstc_init(void) diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c index 44027f34a88a..ed7ec48d11da 100644 --- a/arch/arm/mach-prima2/timer.c +++ b/arch/arm/mach-prima2/timer.c @@ -190,6 +190,7 @@ static void __init sirfsoc_timer_init(void) static struct of_device_id timer_ids[] = { { .compatible = "sirf,prima2-tick" }, + {}, }; static void __init sirfsoc_of_timer_map(void) diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c index 4eb7660a279d..6bf479d9b5ac 100644 --- a/arch/arm/mach-pxa/cm-x2xx-pci.c +++ b/arch/arm/mach-pxa/cm-x2xx-pci.c @@ -77,7 +77,7 @@ void cmx2xx_pci_resume(void) {} #endif /* PCI IRQ mapping*/ -static int __init cmx2xx_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init cmx2xx_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h index a30f2e3ec178..6657ff231161 100644 --- a/arch/arm/mach-realview/include/mach/system.h +++ b/arch/arm/mach-realview/include/mach/system.h @@ -44,6 +44,7 @@ static inline void arch_reset(char mode, const char *cmd) */ if (realview_reset) realview_reset(mode); + dsb(); } #endif diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index a1a7176675b9..38058af48972 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -128,7 +128,7 @@ static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate) unsigned long clkcon0; clkcon0 = __raw_readl(S3C2443_CLKDIV0); - clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK; + clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK; clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT; __raw_writel(clkcon0, S3C2443_CLKDIV0); } diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 9026249233ad..af0c2fe1ea37 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -65,7 +65,7 @@ #include <plat/iic.h> #include <plat/pm.h> -#include <sound/wm8915.h> +#include <sound/wm8996.h> #include <sound/wm8962.h> #include <sound/wm9081.h> @@ -614,7 +614,7 @@ static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = { .disable_touch = true, }; -static struct wm8915_retune_mobile_config wm8915_retune[] = { +static struct wm8996_retune_mobile_config wm8996_retune[] = { { .name = "Sub LPF", .rate = 48000, @@ -635,12 +635,12 @@ static struct wm8915_retune_mobile_config wm8915_retune[] = { }, }; -static struct wm8915_pdata wm8915_pdata __initdata = { +static struct wm8996_pdata wm8996_pdata __initdata = { .ldo_ena = S3C64XX_GPN(7), .gpio_base = CODEC_GPIO_BASE, .micdet_def = 1, - .inl_mode = WM8915_DIFFERRENTIAL_1, - .inr_mode = WM8915_DIFFERRENTIAL_1, + .inl_mode = WM8996_DIFFERRENTIAL_1, + .inr_mode = WM8996_DIFFERRENTIAL_1, .irq_flags = IRQF_TRIGGER_RISING, @@ -652,8 +652,8 @@ static struct wm8915_pdata wm8915_pdata __initdata = { 0x020e, /* GPIO5 == CLKOUT */ }, - .retune_mobile_cfgs = wm8915_retune, - .num_retune_mobile_cfgs = ARRAY_SIZE(wm8915_retune), + .retune_mobile_cfgs = wm8996_retune, + .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune), }; static struct wm8962_pdata wm8962_pdata __initdata = { @@ -679,8 +679,8 @@ static struct i2c_board_info i2c_devs1[] __initdata = { .platform_data = &glenfarclas_pmic_pdata }, { I2C_BOARD_INFO("wm1250-ev1", 0x27) }, - { I2C_BOARD_INFO("wm8915", 0x1a), - .platform_data = &wm8915_pdata, + { I2C_BOARD_INFO("wm8996", 0x1a), + .platform_data = &wm8996_pdata, .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, }, { I2C_BOARD_INFO("wm9081", 0x6c), diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index ecbea92bf83b..a9f3183e0290 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -262,45 +262,6 @@ static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = { .cols = 8, }; -static int smdk6410_backlight_init(struct device *dev) -{ - int ret; - - ret = gpio_request(S3C64XX_GPF(15), "Backlight"); - if (ret) { - printk(KERN_ERR "failed to request GPF for PWM-OUT1\n"); - return ret; - } - - /* Configure GPIO pin with S3C64XX_GPF15_PWM_TOUT1 */ - s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2)); - - return 0; -} - -static void smdk6410_backlight_exit(struct device *dev) -{ - s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_OUTPUT); - gpio_free(S3C64XX_GPF(15)); -} - -static struct platform_pwm_backlight_data smdk6410_backlight_data = { - .pwm_id = 1, - .max_brightness = 255, - .dft_brightness = 255, - .pwm_period_ns = 78770, - .init = smdk6410_backlight_init, - .exit = smdk6410_backlight_exit, -}; - -static struct platform_device smdk6410_backlight_device = { - .name = "pwm-backlight", - .dev = { - .parent = &s3c_device_timer[1].dev, - .platform_data = &smdk6410_backlight_data, - }, -}; - static struct map_desc smdk6410_iodesc[] = {}; static struct platform_device *smdk6410_devices[] __initdata = { diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 8bad64370689..055e2858b0dd 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -16,6 +16,7 @@ #include <linux/suspend.h> #include <linux/serial_core.h> #include <linux/io.h> +#include <linux/gpio.h> #include <mach/map.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c index 69ed4545112b..fe7380f5c3cd 100644 --- a/arch/arm/mach-s5p64x0/irq-eint.c +++ b/arch/arm/mach-s5p64x0/irq-eint.c @@ -129,7 +129,7 @@ static int s5p64x0_alloc_gc(void) } ct = gc->chip_types; - ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_ack = irq_gc_ack_set_bit; ct->chip.irq_mask = irq_gc_mask_set_bit; ct->chip.irq_unmask = irq_gc_mask_clr_bit; ct->chip.irq_set_type = s5p64x0_irq_eint_set_type; diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index 52a8e607bcc2..f5f8fa89679c 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -815,8 +815,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "s5pv210-fimc.0", + .name = "sclk_cam0", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 3), }, @@ -825,8 +824,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "s5pv210-fimc.1", + .name = "sclk_cam1", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 4), }, diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c index 309e388a8a83..f149d278377b 100644 --- a/arch/arm/mach-s5pv210/pm.c +++ b/arch/arm/mach-s5pv210/pm.c @@ -88,7 +88,7 @@ static struct sleep_save s5pv210_core_save[] = { SAVE_ITEM(S3C2410_TCNTO(0)), }; -void s5pv210_cpu_suspend(unsigned long arg) +static int s5pv210_cpu_suspend(unsigned long arg) { unsigned long tmp; diff --git a/arch/arm/mach-sa1100/pci-nanoengine.c b/arch/arm/mach-sa1100/pci-nanoengine.c index 5fc074fe3eee..dd39fee59549 100644 --- a/arch/arm/mach-sa1100/pci-nanoengine.c +++ b/arch/arm/mach-sa1100/pci-nanoengine.c @@ -28,6 +28,7 @@ #include <asm/mach-types.h> #include <mach/nanoengine.h> +#include <mach/hardware.h> static DEFINE_SPINLOCK(nano_lock); @@ -122,7 +123,8 @@ static struct pci_ops pci_nano_ops = { .write = nanoengine_write_config, }; -static int __init pci_nanoengine_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init pci_nanoengine_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { return NANOENGINE_IRQ_GPIO_PCI; } diff --git a/arch/arm/mach-shark/pci.c b/arch/arm/mach-shark/pci.c index 92d7227de0ac..7cb79a092f31 100644 --- a/arch/arm/mach-shark/pci.c +++ b/arch/arm/mach-shark/pci.c @@ -14,7 +14,7 @@ #include <asm/mach/pci.h> #include <asm/mach-types.h> -static int __init shark_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init shark_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (dev->bus->number == 0) if (dev->devfn == 0) diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index ce5c2513c6ce..cdfdd624d21d 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -341,6 +341,7 @@ static struct platform_device mipidsi0_device = { static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, .tmio_caps = MMC_CAP_SD_HIGHSPEED, .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, }; @@ -382,7 +383,7 @@ void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) } static struct sh_mobile_sdhi_info sh_sdhi1_info = { - .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, + .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT, .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ, .tmio_ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .set_pwr = ag5evm_sdhi1_set_pwr, diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 837138e369bc..523f608eb8cf 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -957,19 +957,16 @@ static struct resource csi2_resources[] = { }, }; -static struct platform_device csi2_device = { - .name = "sh-mobile-csi2", - .id = 0, +static struct sh_mobile_ceu_companion csi2 = { + .id = 0, .num_resources = ARRAY_SIZE(csi2_resources), .resource = csi2_resources, - .dev = { - .platform_data = &csi2_info, - }, + .platform_data = &csi2_info, }; static struct sh_mobile_ceu_info sh_mobile_ceu_info = { .flags = SH_CEU_FLAG_USE_8BIT_BUS, - .csi2_dev = &csi2_device.dev, + .csi2 = &csi2, }; static struct resource ceu_resources[] = { @@ -1013,7 +1010,6 @@ static struct platform_device *ap4evb_devices[] __initdata = { &lcdc1_device, &lcdc_device, &hdmi_device, - &csi2_device, &ceu_device, &ap4evb_camera, &meram_device, @@ -1416,6 +1412,7 @@ static void __init ap4evb_init(void) fsi_init_pm_clock(); sh7372_pm_init(); pm_clk_add(&fsi_device.dev, "spu2"); + pm_clk_add(&lcdc1_device.dev, "hdmi"); } static void __init ap4evb_timer_init(void) diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 5b36b6c5b448..17c19dc25604 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -641,6 +641,8 @@ static struct usbhs_private usbhs0_private = { }, .driver_param = { .buswait_bwait = 4, + .d0_tx_id = SHDMA_SLAVE_USB0_TX, + .d1_rx_id = SHDMA_SLAVE_USB0_RX, }, }, }; @@ -810,6 +812,8 @@ static struct usbhs_private usbhs1_private = { .buswait_bwait = 4, .pipe_type = usbhs1_pipe_cfg, .pipe_size = ARRAY_SIZE(usbhs1_pipe_cfg), + .d0_tx_id = SHDMA_SLAVE_USB1_TX, + .d1_rx_id = SHDMA_SLAVE_USB1_RX, }, }, }; @@ -1192,8 +1196,8 @@ static struct platform_device sh_mmcif_device = { }; -static int mackerel_camera_add(struct soc_camera_link *icl, struct device *dev); -static void mackerel_camera_del(struct soc_camera_link *icl); +static int mackerel_camera_add(struct soc_camera_device *icd); +static void mackerel_camera_del(struct soc_camera_device *icd); static int camera_set_capture(struct soc_camera_platform_info *info, int enable) @@ -1232,16 +1236,15 @@ static void mackerel_camera_release(struct device *dev) soc_camera_platform_release(&camera_device); } -static int mackerel_camera_add(struct soc_camera_link *icl, - struct device *dev) +static int mackerel_camera_add(struct soc_camera_device *icd) { - return soc_camera_platform_add(icl, dev, &camera_device, &camera_link, + return soc_camera_platform_add(icd, &camera_device, &camera_link, mackerel_camera_release, 0); } -static void mackerel_camera_del(struct soc_camera_link *icl) +static void mackerel_camera_del(struct soc_camera_device *icd) { - soc_camera_platform_del(icl, camera_device, &camera_link); + soc_camera_platform_del(icd, camera_device, &camera_link); } static struct sh_mobile_ceu_info sh_mobile_ceu_info = { @@ -1589,6 +1592,7 @@ static void __init mackerel_init(void) hdmi_init_pm_clock(); sh7372_pm_init(); pm_clk_add(&fsi_device.dev, "spu2"); + pm_clk_add(&hdmi_lcdc_device.dev, "hdmi"); } static void __init mackerel_timer_init(void) diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c index 6b186aefcbd6..5218c34a9cc6 100644 --- a/arch/arm/mach-shmobile/clock-sh7367.c +++ b/arch/arm/mach-shmobile/clock-sh7367.c @@ -259,9 +259,6 @@ static struct clk mstp_clks[MSTP_NR] = { [CMMSTP003] = MSTP(&r_clk, CMMSTPCR0, 3, 0), /* KEYSC */ }; -#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk } -#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk } - static struct clk_lookup lookups[] = { /* main clocks */ CLKDEV_CON_ID("r_clk", &r_clk), diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 91f5779abdd3..66975921e646 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -503,16 +503,17 @@ static struct clk *late_main_clks[] = { &sh7372_fsidivb_clk, }; -enum { MSTP001, +enum { MSTP001, MSTP000, MSTP131, MSTP130, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP117, MSTP116, MSTP113, MSTP106, MSTP101, MSTP100, MSTP223, - MSTP218, MSTP217, MSTP216, - MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, - MSTP329, MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312, - MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP406, MSTP403, + MSTP218, MSTP217, MSTP216, MSTP214, MSTP208, MSTP207, + MSTP206, MSTP205, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, + MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312, + MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP407, MSTP406, + MSTP405, MSTP404, MSTP403, MSTP400, MSTP_NR }; #define MSTP(_parent, _reg, _bit, _flags) \ @@ -520,6 +521,7 @@ enum { MSTP001, static struct clk mstp_clks[MSTP_NR] = { [MSTP001] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 1, 0), /* IIC2 */ + [MSTP000] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 0, 0), /* MSIOF0 */ [MSTP131] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 31, 0), /* VEU3 */ [MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */ [MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */ @@ -538,14 +540,16 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* DMAC1 */ [MSTP217] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 17, 0), /* DMAC2 */ [MSTP216] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 16, 0), /* DMAC3 */ + [MSTP214] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 14, 0), /* USBDMAC */ + [MSTP208] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 8, 0), /* MSIOF1 */ [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */ [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */ + [MSTP205] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 5, 0), /* MSIOF2 */ [MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */ [MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */ [MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */ [MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */ [MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */ - [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ [MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSI2 */ [MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */ [MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */ @@ -557,14 +561,14 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP413] = MSTP(&pllc1_div2_clk, SMSTPCR4, 13, 0), /* HDMI */ [MSTP411] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 11, 0), /* IIC3 */ [MSTP410] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 10, 0), /* IIC4 */ + [MSTP407] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 7, 0), /* USB-DMAC1 */ [MSTP406] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 6, 0), /* USB1 */ + [MSTP405] = MSTP(&r_clk, SMSTPCR4, 5, 0), /* CMT4 */ + [MSTP404] = MSTP(&r_clk, SMSTPCR4, 4, 0), /* CMT3 */ [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */ + [MSTP400] = MSTP(&r_clk, SMSTPCR4, 0, 0), /* CMT2 */ }; -#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk } -#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk } -#define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk } - static struct clk_lookup lookups[] = { /* main clocks */ CLKDEV_CON_ID("dv_clki_div2_clk", &sh7372_dv_clki_div2_clk), @@ -613,6 +617,7 @@ static struct clk_lookup lookups[] = { /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */ + CLKDEV_DEV_ID("spi_sh_msiof.0", &mstp_clks[MSTP000]), /* MSIOF0 */ CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */ CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */ CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */ @@ -633,14 +638,16 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* DMAC1 */ CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), /* DMAC2 */ CLKDEV_DEV_ID("sh-dma-engine.2", &mstp_clks[MSTP216]), /* DMAC3 */ + CLKDEV_DEV_ID("sh-dma-engine.3", &mstp_clks[MSTP214]), /* USB-DMAC0 */ + CLKDEV_DEV_ID("spi_sh_msiof.1", &mstp_clks[MSTP208]), /* MSIOF1 */ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP206]), /* SCIFB */ + CLKDEV_DEV_ID("spi_sh_msiof.2", &mstp_clks[MSTP205]), /* MSIOF2 */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */ CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */ CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */ - CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */ CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */ @@ -654,11 +661,17 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-mobile-hdmi", &mstp_clks[MSTP413]), /* HDMI */ CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* IIC3 */ CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* IIC4 */ + CLKDEV_DEV_ID("sh-dma-engine.4", &mstp_clks[MSTP407]), /* USB-DMAC1 */ CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */ CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */ CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[MSTP406]), /* USB1 */ + CLKDEV_DEV_ID("sh_cmt.4", &mstp_clks[MSTP405]), /* CMT4 */ + CLKDEV_DEV_ID("sh_cmt.3", &mstp_clks[MSTP404]), /* CMT3 */ CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */ + CLKDEV_DEV_ID("sh_cmt.2", &mstp_clks[MSTP400]), /* CMT2 */ + CLKDEV_ICK_ID("hdmi", "sh_mobile_lcdc_fb.1", + &div6_reparent_clks[DIV6_HDMI]), CLKDEV_ICK_ID("ick", "sh-mobile-hdmi", &div6_reparent_clks[DIV6_HDMI]), CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]), CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]), diff --git a/arch/arm/mach-shmobile/clock-sh7377.c b/arch/arm/mach-shmobile/clock-sh7377.c index 95942466e63f..8cee7b151ae3 100644 --- a/arch/arm/mach-shmobile/clock-sh7377.c +++ b/arch/arm/mach-shmobile/clock-sh7377.c @@ -267,9 +267,6 @@ static struct clk mstp_clks[] = { [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */ }; -#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk } -#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk } - static struct clk_lookup lookups[] = { /* main clocks */ CLKDEV_CON_ID("r_clk", &r_clk), diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index bcacb1e8cf85..61a846bb30f2 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -306,10 +306,6 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */ }; -#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk } -#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk } -#define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk } - static struct clk_lookup lookups[] = { /* main clocks */ CLKDEV_CON_ID("r_clk", &r_clk), @@ -369,7 +365,7 @@ void __init sh73a0_clock_init(void) __raw_writel(0x108, SD2CKCR); /* detect main clock parent */ - switch ((__raw_readl(CKSCR) >> 24) & 0x03) { + switch ((__raw_readl(CKSCR) >> 28) & 0x03) { case 0: main_clk.parent = &sh73a0_extal1_clk; break; diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index ce595cee86cd..24e63a85e669 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -459,6 +459,10 @@ enum { SHDMA_SLAVE_SDHI2_TX, SHDMA_SLAVE_MMCIF_RX, SHDMA_SLAVE_MMCIF_TX, + SHDMA_SLAVE_USB0_TX, + SHDMA_SLAVE_USB0_RX, + SHDMA_SLAVE_USB1_TX, + SHDMA_SLAVE_USB1_RX, }; extern struct clk sh7372_extal1_clk; diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c index 3b28743c77eb..739315e30eb9 100644 --- a/arch/arm/mach-shmobile/intc-sh7372.c +++ b/arch/arm/mach-shmobile/intc-sh7372.c @@ -379,7 +379,7 @@ enum { /* BBIF2 */ VPU, TSIF1, - _3DG_SGX530, + /* 3DG */ _2DDMAC, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2, IPMMU_IPMMUR, IPMMU_IPMMUR2, @@ -436,7 +436,7 @@ static struct intc_vect intcs_vectors[] = { /* BBIF2 */ INTCS_VECT(VPU, 0x980), INTCS_VECT(TSIF1, 0x9a0), - INTCS_VECT(_3DG_SGX530, 0x9e0), + /* 3DG */ INTCS_VECT(_2DDMAC, 0xa00), INTCS_VECT(IIC2_ALI2, 0xa80), INTCS_VECT(IIC2_TACKI2, 0xaa0), INTCS_VECT(IIC2_WAITI2, 0xac0), INTCS_VECT(IIC2_DTEI2, 0xae0), @@ -521,7 +521,7 @@ static struct intc_mask_reg intcs_mask_registers[] = { RTDMAC_1_DEI3, RTDMAC_1_DEI2, RTDMAC_1_DEI1, RTDMAC_1_DEI0 } }, { 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */ { 0, 0, MSIOF, 0, - _3DG_SGX530, 0, 0, 0 } }, + 0, 0, 0, 0 } }, { 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */ { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0, 0, 0, 0, 0 } }, @@ -561,7 +561,6 @@ static struct intc_prio_reg intcs_prio_registers[] = { TMU_TUNI2, TSIF1 } }, { 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, 0, VEU, BEU } }, { 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF0, IIC0 } }, - { 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, _3DG_SGX530, 0, 0 } }, { 0xffd20028, 0, 16, 4, /* IPRKS */ { 0, 0, LMB, 0 } }, { 0xffd2002c, 0, 16, 4, /* IPRLS */ { IPMMU, 0, 0, 0 } }, { 0xffd20030, 0, 16, 4, /* IPRMS */ { IIC2, 0, 0, 0 } }, diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 79f0413d8725..2d9b1b1a2538 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -169,35 +169,35 @@ static struct platform_device scif6_device = { }; /* CMT */ -static struct sh_timer_config cmt10_platform_data = { - .name = "CMT10", - .channel_offset = 0x10, - .timer_bit = 0, +static struct sh_timer_config cmt2_platform_data = { + .name = "CMT2", + .channel_offset = 0x40, + .timer_bit = 5, .clockevent_rating = 125, .clocksource_rating = 125, }; -static struct resource cmt10_resources[] = { +static struct resource cmt2_resources[] = { [0] = { - .name = "CMT10", - .start = 0xe6138010, - .end = 0xe613801b, + .name = "CMT2", + .start = 0xe6130040, + .end = 0xe613004b, .flags = IORESOURCE_MEM, }, [1] = { - .start = evt2irq(0x0b00), /* CMT1_CMT10 */ + .start = evt2irq(0x0b80), /* CMT2 */ .flags = IORESOURCE_IRQ, }, }; -static struct platform_device cmt10_device = { +static struct platform_device cmt2_device = { .name = "sh_cmt", - .id = 10, + .id = 2, .dev = { - .platform_data = &cmt10_platform_data, + .platform_data = &cmt2_platform_data, }, - .resource = cmt10_resources, - .num_resources = ARRAY_SIZE(cmt10_resources), + .resource = cmt2_resources, + .num_resources = ARRAY_SIZE(cmt2_resources), }; /* TMU */ @@ -602,6 +602,150 @@ static struct platform_device dma2_device = { }, }; +/* + * USB-DMAC + */ + +unsigned int usbts_shift[] = {3, 4, 5}; + +enum { + XMIT_SZ_8BYTE = 0, + XMIT_SZ_16BYTE = 1, + XMIT_SZ_32BYTE = 2, +}; + +#define USBTS_INDEX2VAL(i) (((i) & 3) << 6) + +static const struct sh_dmae_channel sh7372_usb_dmae_channels[] = { + { + .offset = 0, + }, { + .offset = 0x20, + }, +}; + +/* USB DMAC0 */ +static const struct sh_dmae_slave_config sh7372_usb_dmae0_slaves[] = { + { + .slave_id = SHDMA_SLAVE_USB0_TX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, { + .slave_id = SHDMA_SLAVE_USB0_RX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, +}; + +static struct sh_dmae_pdata usb_dma0_platform_data = { + .slave = sh7372_usb_dmae0_slaves, + .slave_num = ARRAY_SIZE(sh7372_usb_dmae0_slaves), + .channel = sh7372_usb_dmae_channels, + .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels), + .ts_low_shift = 6, + .ts_low_mask = 0xc0, + .ts_high_shift = 0, + .ts_high_mask = 0, + .ts_shift = usbts_shift, + .ts_shift_num = ARRAY_SIZE(usbts_shift), + .dmaor_init = DMAOR_DME, + .chcr_offset = 0x14, + .chcr_ie_bit = 1 << 5, + .dmaor_is_32bit = 1, + .needs_tend_set = 1, + .no_dmars = 1, +}; + +static struct resource sh7372_usb_dmae0_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xe68a0020, + .end = 0xe68a0064 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* VCR/SWR/DMICR */ + .start = 0xe68a0000, + .end = 0xe68a0014 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* IRQ for channels */ + .start = evt2irq(0x0a00), + .end = evt2irq(0x0a00), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_dma0_device = { + .name = "sh-dma-engine", + .id = 3, + .resource = sh7372_usb_dmae0_resources, + .num_resources = ARRAY_SIZE(sh7372_usb_dmae0_resources), + .dev = { + .platform_data = &usb_dma0_platform_data, + }, +}; + +/* USB DMAC1 */ +static const struct sh_dmae_slave_config sh7372_usb_dmae1_slaves[] = { + { + .slave_id = SHDMA_SLAVE_USB1_TX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, { + .slave_id = SHDMA_SLAVE_USB1_RX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, +}; + +static struct sh_dmae_pdata usb_dma1_platform_data = { + .slave = sh7372_usb_dmae1_slaves, + .slave_num = ARRAY_SIZE(sh7372_usb_dmae1_slaves), + .channel = sh7372_usb_dmae_channels, + .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels), + .ts_low_shift = 6, + .ts_low_mask = 0xc0, + .ts_high_shift = 0, + .ts_high_mask = 0, + .ts_shift = usbts_shift, + .ts_shift_num = ARRAY_SIZE(usbts_shift), + .dmaor_init = DMAOR_DME, + .chcr_offset = 0x14, + .chcr_ie_bit = 1 << 5, + .dmaor_is_32bit = 1, + .needs_tend_set = 1, + .no_dmars = 1, +}; + +static struct resource sh7372_usb_dmae1_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xe68c0020, + .end = 0xe68c0064 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* VCR/SWR/DMICR */ + .start = 0xe68c0000, + .end = 0xe68c0014 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* IRQ for channels */ + .start = evt2irq(0x1d00), + .end = evt2irq(0x1d00), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_dma1_device = { + .name = "sh-dma-engine", + .id = 4, + .resource = sh7372_usb_dmae1_resources, + .num_resources = ARRAY_SIZE(sh7372_usb_dmae1_resources), + .dev = { + .platform_data = &usb_dma1_platform_data, + }, +}; + /* VPU */ static struct uio_info vpu_platform_data = { .name = "VPU5HG", @@ -818,7 +962,7 @@ static struct platform_device *sh7372_early_devices[] __initdata = { &scif4_device, &scif5_device, &scif6_device, - &cmt10_device, + &cmt2_device, &tmu00_device, &tmu01_device, }; @@ -829,6 +973,8 @@ static struct platform_device *sh7372_late_devices[] __initdata = { &dma0_device, &dma1_device, &dma2_device, + &usb_dma0_device, + &usb_dma1_device, &vpu_device, &veu0_device, &veu1_device, diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 5ec1846aa1d0..d82ebab50e11 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -27,14 +27,14 @@ comment "Tegra board type" config MACH_HARMONY bool "Harmony board" - select MACH_HAS_SND_SOC_TEGRA_WM8903 + select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC help Support for nVidia Harmony development platform config MACH_KAEN bool "Kaen board" select MACH_SEABOARD - select MACH_HAS_SND_SOC_TEGRA_WM8903 + select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC help Support for the Kaen version of Seaboard @@ -45,12 +45,18 @@ config MACH_PAZ00 config MACH_SEABOARD bool "Seaboard board" - select MACH_HAS_SND_SOC_TEGRA_WM8903 + select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC help Support for nVidia Seaboard development platform. It will also be included for some of the derivative boards that have large similarities with the seaboard design. +config MACH_TEGRA_DT + bool "Generic Tegra board (FDT support)" + select USE_OF + help + Support for generic nVidia Tegra boards using Flattened Device Tree + config MACH_TRIMSLICE bool "TrimSlice board" select TEGRA_PCI diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index ed58ef9019b5..f11b9100114a 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -29,5 +29,8 @@ obj-${CONFIG_MACH_PAZ00} += board-paz00-pinmux.o obj-${CONFIG_MACH_SEABOARD} += board-seaboard.o obj-${CONFIG_MACH_SEABOARD} += board-seaboard-pinmux.o +obj-${CONFIG_MACH_TEGRA_DT} += board-dt.o +obj-${CONFIG_MACH_TEGRA_DT} += board-harmony-pinmux.o + obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice.o obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice-pinmux.o diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot index db52d61a7386..428ad122be03 100644 --- a/arch/arm/mach-tegra/Makefile.boot +++ b/arch/arm/mach-tegra/Makefile.boot @@ -1,3 +1,6 @@ zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00008000 params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100 initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000 + +dtb-$(CONFIG_MACH_HARMONY) += tegra-harmony.dtb +dtb-$(CONFIG_MACH_SEABOARD) += tegra-seaboard.dtb diff --git a/arch/arm/mach-tegra/board-dt.c b/arch/arm/mach-tegra/board-dt.c new file mode 100644 index 000000000000..9f47e04446f3 --- /dev/null +++ b/arch/arm/mach-tegra/board-dt.c @@ -0,0 +1,119 @@ +/* + * nVidia Tegra device tree board support + * + * Copyright (C) 2010 Secret Lab Technologies, Ltd. + * Copyright (C) 2010 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> +#include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/irqdomain.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/pda_power.h> +#include <linux/io.h> +#include <linux/i2c.h> +#include <linux/i2c-tegra.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/setup.h> + +#include <mach/iomap.h> +#include <mach/irqs.h> + +#include "board.h" +#include "board-harmony.h" +#include "clock.h" +#include "devices.h" + +void harmony_pinmux_init(void); +void seaboard_pinmux_init(void); + + +struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC2_BASE, "sdhci-tegra.1", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC3_BASE, "sdhci-tegra.2", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC4_BASE, "sdhci-tegra.3", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C_BASE, "tegra-i2c.0", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C2_BASE, "tegra-i2c.1", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C3_BASE, "tegra-i2c.2", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_DVC_BASE, "tegra-i2c.3", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S1_BASE, "tegra-i2s.0", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S1_BASE, "tegra-i2s.1", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-das", TEGRA_APB_MISC_DAS_BASE, "tegra-das", NULL), + {} +}; + +static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { + /* name parent rate enabled */ + { "uartd", "pll_p", 216000000, true }, + { NULL, NULL, 0, 0}, +}; + +static struct of_device_id tegra_dt_match_table[] __initdata = { + { .compatible = "simple-bus", }, + {} +}; + +static struct of_device_id tegra_dt_gic_match[] __initdata = { + { .compatible = "nvidia,tegra20-gic", }, + {} +}; + +static void __init tegra_dt_init(void) +{ + struct device_node *node; + + node = of_find_matching_node_by_address(NULL, tegra_dt_gic_match, + TEGRA_ARM_INT_DIST_BASE); + if (node) + irq_domain_add_simple(node, INT_GIC_BASE); + + tegra_clk_init_from_table(tegra_dt_clk_init_table); + + if (of_machine_is_compatible("nvidia,harmony")) + harmony_pinmux_init(); + else if (of_machine_is_compatible("nvidia,seaboard")) + seaboard_pinmux_init(); + + /* + * Finished with the static registrations now; fill in the missing + * devices + */ + of_platform_populate(NULL, tegra_dt_match_table, tegra20_auxdata_lookup, NULL); +} + +static const char * tegra_dt_board_compat[] = { + "nvidia,harmony", + "nvidia,seaboard", + NULL +}; + +DT_MACHINE_START(TEGRA_DT, "nVidia Tegra (Flattened Device Tree)") + .map_io = tegra_map_common_io, + .init_early = tegra_init_early, + .init_irq = tegra_init_irq, + .timer = &tegra_timer, + .init_machine = tegra_dt_init, + .dt_compat = tegra_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c index 031cd0a7d71d..f1f699d86c32 100644 --- a/arch/arm/mach-tegra/pcie.c +++ b/arch/arm/mach-tegra/pcie.c @@ -449,7 +449,7 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys) return 1; } -static int tegra_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int tegra_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { return INT_PCIE_INTR; } diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig index 9cdec5aa04a0..c1f38f6625b2 100644 --- a/arch/arm/mach-versatile/Kconfig +++ b/arch/arm/mach-versatile/Kconfig @@ -17,4 +17,12 @@ config MACH_VERSATILE_AB Include support for the ARM(R) Versatile Application Baseboard for the ARM926EJ-S. +config MACH_VERSATILE_DT + bool "Support Versatile platform from device tree" + select USE_OF + select CPU_ARM926T + help + Include support for the ARM(R) Versatile/PB platform, + using the device tree for discovery + endmenu diff --git a/arch/arm/mach-versatile/Makefile b/arch/arm/mach-versatile/Makefile index 97cf4d831b0c..81fa3fe25e1a 100644 --- a/arch/arm/mach-versatile/Makefile +++ b/arch/arm/mach-versatile/Makefile @@ -5,4 +5,5 @@ obj-y := core.o obj-$(CONFIG_ARCH_VERSATILE_PB) += versatile_pb.o obj-$(CONFIG_MACH_VERSATILE_AB) += versatile_ab.o +obj-$(CONFIG_MACH_VERSATILE_DT) += versatile_dt.o obj-$(CONFIG_PCI) += pci.o diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 0c99cf076c63..e340a54251df 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -24,6 +24,9 @@ #include <linux/platform_device.h> #include <linux/sysdev.h> #include <linux/interrupt.h> +#include <linux/irqdomain.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> #include <linux/amba/bus.h> #include <linux/amba/clcd.h> #include <linux/amba/pl061.h> @@ -83,13 +86,26 @@ static struct fpga_irq_data sic_irq = { #define PIC_MASK 0 #endif +/* Lookup table for finding a DT node that represents the vic instance */ +static const struct of_device_id vic_of_match[] __initconst = { + { .compatible = "arm,versatile-vic", }, + {} +}; + +static const struct of_device_id sic_of_match[] __initconst = { + { .compatible = "arm,versatile-sic", }, + {} +}; + void __init versatile_init_irq(void) { vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0); + irq_domain_generate_simple(vic_of_match, VERSATILE_VIC_BASE, IRQ_VIC_START); writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR); fpga_irq_init(IRQ_VICSOURCE31, ~PIC_MASK, &sic_irq); + irq_domain_generate_simple(sic_of_match, VERSATILE_SIC_BASE, IRQ_SIC_START); /* * Interrupts on secondary controller from 0 to 8 are routed to @@ -646,6 +662,52 @@ static struct amba_device *amba_devs[] __initdata = { &kmi1_device, }; +#ifdef CONFIG_OF +/* + * Lookup table for attaching a specific name and platform_data pointer to + * devices as they get created by of_platform_populate(). Ideally this table + * would not exist, but the current clock implementation depends on some devices + * having a specific name. + */ +struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_KMI0_BASE, "fpga:06", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_KMI1_BASE, "fpga:07", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART3_BASE, "fpga:09", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", NULL), + + OF_DEV_AUXDATA("arm,primecell", VERSATILE_CLCD_BASE, "dev:20", &clcd_plat_data), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART0_BASE, "dev:f1", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART1_BASE, "dev:f2", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART2_BASE, "dev:f3", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_SSP_BASE, "dev:f4", NULL), + +#if 0 + /* + * These entries are unnecessary because no clocks referencing + * them. I've left them in for now as place holders in case + * any of them need to be added back, but they should be + * removed before actually committing this patch. --gcl + */ + OF_DEV_AUXDATA("arm,primecell", VERSATILE_AACI_BASE, "fpga:04", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCI1_BASE, "fpga:0a", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_SMC_BASE, "dev:00", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_MPMC_BASE, "dev:10", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_DMAC_BASE, "dev:30", NULL), + + OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCTL_BASE, "dev:e0", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_WATCHDOG_BASE, "dev:e1", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO0_BASE, "dev:e4", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO1_BASE, "dev:e5", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO2_BASE, "dev:e6", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO3_BASE, "dev:e7", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_RTC_BASE, "dev:e8", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCI_BASE, "dev:f0", NULL), +#endif + {} +}; +#endif + #ifdef CONFIG_LEDS #define VA_LEDS_BASE (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET) diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h index fd6404e5d788..e01422700ebb 100644 --- a/arch/arm/mach-versatile/core.h +++ b/arch/arm/mach-versatile/core.h @@ -23,6 +23,7 @@ #define __ASM_ARCH_VERSATILE_H #include <linux/amba/bus.h> +#include <linux/of_platform.h> extern void __init versatile_init(void); extern void __init versatile_init_early(void); @@ -30,6 +31,9 @@ extern void __init versatile_init_irq(void); extern void __init versatile_map_io(void); extern struct sys_timer versatile_timer; extern unsigned int mmc_status(struct device *dev); +#ifdef CONFIG_OF +extern struct of_dev_auxdata versatile_auxdata_lookup[]; +#endif #define AMBA_DEVICE(name,busid,base,plat) \ static struct amba_device name##_device = { \ diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index 7848a177b1f0..c898deb3ada0 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -328,7 +328,7 @@ void __init pci_versatile_preinit(void) /* * map the specified device/slot/pin to an IRQ. Different backplanes may need to modify this. */ -static int __init versatile_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; int devslot = PCI_SLOT(dev->devfn); diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c new file mode 100644 index 000000000000..54e037c090f5 --- /dev/null +++ b/arch/arm/mach-versatile/versatile_dt.c @@ -0,0 +1,51 @@ +/* + * Versatile board support using the device tree + * + * Copyright (C) 2010 Secret Lab Technologies Ltd. + * Copyright (C) 2009 Jeremy Kerr <jeremy.kerr@canonical.com> + * Copyright (C) 2004 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include "core.h" + +static void __init versatile_dt_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + versatile_auxdata_lookup, NULL); +} + +static const char *versatile_dt_match[] __initconst = { + "arm,versatile-ab", + "arm,versatile-pb", + NULL, +}; + +DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)") + .map_io = versatile_map_io, + .init_early = versatile_init_early, + .init_irq = versatile_init_irq, + .timer = &versatile_timer, + .init_machine = versatile_dt_init, + .dt_compat = versatile_dt_match, +MACHINE_END diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 9e6b93b1a043..d0d267a8d3f9 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -318,6 +318,10 @@ static struct clk v2m_sp804_clk = { .rate = 1000000, }; +static struct clk v2m_ref_clk = { + .rate = 32768, +}; + static struct clk dummy_apb_pclk; static struct clk_lookup v2m_lookups[] = { @@ -348,6 +352,9 @@ static struct clk_lookup v2m_lookups[] = { }, { /* CLCD */ .dev_id = "mb:clcd", .clk = &osc1_clk, + }, { /* SP805 WDT */ + .dev_id = "mb:wdt", + .clk = &v2m_ref_clk, }, { /* SP804 timers */ .dev_id = "sp804", .con_id = "v2m-timer0", diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile index c550c67aa893..397268c1b250 100644 --- a/arch/arm/mach-zynq/Makefile +++ b/arch/arm/mach-zynq/Makefile @@ -3,4 +3,4 @@ # # Common support -obj-y := common.o timer.o board_dt.o +obj-y := common.o timer.o diff --git a/arch/arm/mach-zynq/board_dt.c b/arch/arm/mach-zynq/board_dt.c deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/arch/arm/mach-zynq/board_dt.c +++ /dev/null diff --git a/arch/arm/mm/abort-macro.S b/arch/arm/mm/abort-macro.S index 52162d59407a..2cbf68ef0e83 100644 --- a/arch/arm/mm/abort-macro.S +++ b/arch/arm/mm/abort-macro.S @@ -17,7 +17,7 @@ cmp \tmp, # 0x5600 @ Is it ldrsb? orreq \tmp, \tmp, #1 << 11 @ Set L-bit if yes tst \tmp, #1 << 11 @ L = 0 -> write - orreq \psr, \psr, #1 << 11 @ yes. + orreq \fsr, \fsr, #1 << 11 @ yes. b do_DataAbort not_thumb: .endm diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index be7c638b648b..cfbcf8b95599 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -22,6 +22,7 @@ #include <linux/sched.h> #include <linux/uaccess.h> +#include <asm/system.h> #include <asm/unaligned.h> #include "fault.h" @@ -95,6 +96,33 @@ static const char *usermode_action[] = { "signal+warn" }; +/* Return true if and only if the ARMv6 unaligned access model is in use. */ +static bool cpu_is_v6_unaligned(void) +{ + return cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U); +} + +static int safe_usermode(int new_usermode, bool warn) +{ + /* + * ARMv6 and later CPUs can perform unaligned accesses for + * most single load and store instructions up to word size. + * LDM, STM, LDRD and STRD still need to be handled. + * + * Ignoring the alignment fault is not an option on these + * CPUs since we spin re-faulting the instruction without + * making any progress. + */ + if (cpu_is_v6_unaligned() && !(new_usermode & (UM_FIXUP | UM_SIGNAL))) { + new_usermode |= UM_FIXUP; + + if (warn) + printk(KERN_WARNING "alignment: ignoring faults is unsafe on this CPU. Defaulting to fixup mode.\n"); + } + + return new_usermode; +} + static int alignment_proc_show(struct seq_file *m, void *v) { seq_printf(m, "User:\t\t%lu\n", ai_user); @@ -125,7 +153,7 @@ static ssize_t alignment_proc_write(struct file *file, const char __user *buffer if (get_user(mode, buffer)) return -EFAULT; if (mode >= '0' && mode <= '5') - ai_usermode = mode - '0'; + ai_usermode = safe_usermode(mode - '0', true); } return count; } @@ -886,9 +914,16 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (ai_usermode & UM_FIXUP) goto fixup; - if (ai_usermode & UM_SIGNAL) - force_sig(SIGBUS, current); - else { + if (ai_usermode & UM_SIGNAL) { + siginfo_t si; + + si.si_signo = SIGBUS; + si.si_errno = 0; + si.si_code = BUS_ADRALN; + si.si_addr = (void __user *)addr; + + force_sig_info(si.si_signo, &si, current); + } else { /* * We're about to disable the alignment trap and return to * user space. But if an interrupt occurs before actually @@ -926,20 +961,11 @@ static int __init alignment_init(void) return -ENOMEM; #endif - /* - * ARMv6 and later CPUs can perform unaligned accesses for - * most single load and store instructions up to word size. - * LDM, STM, LDRD and STRD still need to be handled. - * - * Ignoring the alignment fault is not an option on these - * CPUs since we spin re-faulting the instruction without - * making any progress. - */ - if (cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U)) { + if (cpu_is_v6_unaligned()) { cr_alignment &= ~CR_A; cr_no_alignment &= ~CR_A; set_cr(cr_alignment); - ai_usermode = UM_FIXUP; + ai_usermode = safe_usermode(ai_usermode, false); } hook_fault_code(1, do_alignment, SIGBUS, BUS_ADRALN, diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 44c086710d2b..9ecfdb511951 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -277,6 +277,25 @@ static void l2x0_disable(void) spin_unlock_irqrestore(&l2x0_lock, flags); } +static void __init l2x0_unlock(__u32 cache_id) +{ + int lockregs; + int i; + + if (cache_id == L2X0_CACHE_ID_PART_L310) + lockregs = 8; + else + /* L210 and unknown types */ + lockregs = 1; + + for (i = 0; i < lockregs; i++) { + writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE + + i * L2X0_LOCKDOWN_STRIDE); + writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE + + i * L2X0_LOCKDOWN_STRIDE); + } +} + void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) { __u32 aux; @@ -328,6 +347,8 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) * accessing the below registers will fault. */ if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + /* Make sure that I&D is not locked down when starting */ + l2x0_unlock(cache_id); /* l2x0 controller is disabled */ writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL); diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 3b24bfa3b828..07c4bc8ea0a4 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -174,6 +174,10 @@ ENTRY(v7_coherent_user_range) dcache_line_size r2, r3 sub r3, r2, #1 bic r12, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: USER( mcr p15, 0, r12, c7, c11, 1 ) @ clean D line to the point of unification add r12, r12, r2 @@ -223,6 +227,10 @@ ENTRY(v7_flush_kern_dcache_area) add r1, r0, r1 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line add r0, r0, r2 @@ -247,6 +255,10 @@ v7_dma_inv_range: sub r3, r2, #1 tst r0, r3 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line tst r1, r3 @@ -270,6 +282,10 @@ v7_dma_clean_range: dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c10, 1 @ clean D / U line add r0, r0, r2 @@ -288,6 +304,10 @@ ENTRY(v7_dma_flush_range) dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line add r0, r0, r2 diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 0a0a1e7c20d2..c3ff82f92d9c 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -324,6 +324,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, if (addr) *handle = pfn_to_dma(dev, page_to_pfn(page)); + else + __dma_free_buffer(page, size); return addr; } diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 2fee782077c1..cc7e2d8be9aa 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -298,7 +298,7 @@ static void __init arm_bootmem_free(unsigned long min, unsigned long max_low, #ifdef CONFIG_HAVE_ARCH_PFN_VALID int pfn_valid(unsigned long pfn) { - return memblock_is_memory(pfn << PAGE_SHIFT); + return memblock_is_memory(__pfn_to_phys(pfn)); } EXPORT_SYMBOL(pfn_valid); #endif @@ -441,7 +441,7 @@ static inline int free_area(unsigned long pfn, unsigned long end, char *s) static inline void poison_init_mem(void *s, size_t count) { u32 *p = (u32 *)s; - while ((count = count - 4)) + for (; count != 0; count -= 4) *p++ = 0xe7fddef0; } diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 92bd102e3982..2e6849b41f66 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -379,7 +379,7 @@ ENTRY(cpu_arm920_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm920_suspend_size -.equ cpu_arm920_suspend_size, 4 * 3 +.equ cpu_arm920_suspend_size, 4 * 4 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_arm920_do_suspend) stmfd sp!, {r4 - r7, lr} diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 2bbcf053dffd..cd8f79c3a282 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -394,7 +394,7 @@ ENTRY(cpu_arm926_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm926_suspend_size -.equ cpu_arm926_suspend_size, 4 * 3 +.equ cpu_arm926_suspend_size, 4 * 4 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_arm926_do_suspend) stmfd sp!, {r4 - r7, lr} diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index f8f7ea34bfc5..683af3a182b7 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -410,6 +410,7 @@ __arm946_proc_info: .long 0x41009460 .long 0xff00fff0 .long 0 + .long 0 b __arm946_setup .long cpu_arch_name .long cpu_elf_name @@ -418,6 +419,6 @@ __arm946_proc_info: .long arm946_processor_functions .long 0 .long 0 - .long arm940_cache_fns + .long arm946_cache_fns .size __arm946_proc_info, . - __arm946_proc_info diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 07219c2ae114..69e7f2ef7384 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -182,11 +182,11 @@ ENDPROC(cpu_sa1100_do_suspend) ENTRY(cpu_sa1100_do_resume) ldmia r0, {r4 - r7} @ load cp regs - mov r1, #0 - mcr p15, 0, r1, c8, c7, 0 @ flush I+D TLBs - mcr p15, 0, r1, c7, c7, 0 @ flush I&D cache - mcr p15, 0, r1, c9, c0, 0 @ invalidate RB - mcr p15, 0, r1, c9, c0, 5 @ allow user space to use RB + mov ip, #0 + mcr p15, 0, ip, c8, c7, 0 @ flush I+D TLBs + mcr p15, 0, ip, c7, c7, 0 @ flush I&D cache + mcr p15, 0, ip, c9, c0, 0 @ invalidate RB + mcr p15, 0, ip, c9, c0, 5 @ allow user space to use RB mcr p15, 0, r4, c3, c0, 0 @ domain ID mcr p15, 0, r5, c2, c0, 0 @ translation table base addr diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 219138d2f158..a923aa0fd00d 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -223,6 +223,22 @@ __v6_setup: mrc p15, 0, r0, c1, c0, 0 @ read control register bic r0, r0, r5 @ clear bits them orr r0, r0, r6 @ set them +#ifdef CONFIG_ARM_ERRATA_364296 + /* + * Workaround for the 364296 ARM1136 r0p2 erratum (possible cache data + * corruption with hit-under-miss enabled). The conditional code below + * (setting the undocumented bit 31 in the auxiliary control register + * and the FI bit in the control register) disables hit-under-miss + * without putting the processor into full low interrupt latency mode. + */ + ldr r6, =0x4107b362 @ id for ARM1136 r0p2 + mrc p15, 0, r5, c0, c0, 0 @ get processor id + teq r5, r6 @ check for the faulty core + mrceq p15, 0, r5, c1, c0, 1 @ load aux control reg + orreq r5, r5, #(1 << 31) @ set the undocumented bit 31 + mcreq p15, 0, r5, c1, c0, 1 @ write aux control reg + orreq r0, r0, #(1 << 21) @ low interrupt latency configuration +#endif mov pc, lr @ return to head.S:__ret /* diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index a30e78542ccf..9049c0764db2 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -66,6 +66,7 @@ ENDPROC(cpu_v7_proc_fin) ENTRY(cpu_v7_reset) mrc p15, 0, r1, c1, c0, 0 @ ctrl register bic r1, r1, #0x1 @ ...............m + THUMB( bic r1, r1, #1 << 30 ) @ SCTLR.TE (Thumb exceptions) mcr p15, 0, r1, c1, c0, 0 @ disable MMU isb mov pc, r0 @@ -247,13 +248,16 @@ ENTRY(cpu_v7_do_resume) mcr p15, 0, r7, c2, c0, 0 @ TTB 0 mcr p15, 0, r8, c2, c0, 1 @ TTB 1 mcr p15, 0, ip, c2, c0, 2 @ TTB control register - mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register + mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary control register + teq r4, r10 @ Is it already set? + mcrne p15, 0, r10, c1, c0, 1 @ No, so write it mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control ldr r4, =PRRR @ PRRR ldr r5, =NMRR @ NMRR mcr p15, 0, r4, c10, c2, 0 @ write PRRR mcr p15, 0, r5, c10, c2, 1 @ write NMRR isb + dsb mov r0, r9 @ control register mov r2, r7, lsr #14 @ get TTB0 base mov r2, r2, lsl #14 diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 28c72a2006a1..755e1bf22681 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -406,7 +406,7 @@ ENTRY(cpu_xsc3_set_pte_ext) .align .globl cpu_xsc3_suspend_size -.equ cpu_xsc3_suspend_size, 4 * 8 +.equ cpu_xsc3_suspend_size, 4 * 7 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_xsc3_do_suspend) stmfd sp!, {r4 - r10, lr} @@ -418,12 +418,12 @@ ENTRY(cpu_xsc3_do_suspend) mrc p15, 0, r9, c1, c0, 1 @ auxiliary control reg mrc p15, 0, r10, c1, c0, 0 @ control reg bic r4, r4, #2 @ clear frequency change bit - stmia r0, {r1, r4 - r10} @ store v:p offset + cp regs + stmia r0, {r4 - r10} @ store cp regs ldmia sp!, {r4 - r10, pc} ENDPROC(cpu_xsc3_do_suspend) ENTRY(cpu_xsc3_do_resume) - ldmia r0, {r1, r4 - r10} @ load v:p offset + cp regs + ldmia r0, {r4 - r10} @ load cp regs mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c index 4fc6ffc2a13e..0bae44e890db 100644 --- a/arch/arm/plat-mxc/devices/platform-fec.c +++ b/arch/arm/plat-mxc/devices/platform-fec.c @@ -11,40 +11,45 @@ #include <mach/hardware.h> #include <mach/devices-common.h> -#define imx_fec_data_entry_single(soc) \ +#define imx_fec_data_entry_single(soc, _devid) \ { \ + .devid = _devid, \ .iobase = soc ## _FEC_BASE_ADDR, \ .irq = soc ## _INT_FEC, \ } #ifdef CONFIG_SOC_IMX25 const struct imx_fec_data imx25_fec_data __initconst = - imx_fec_data_entry_single(MX25); + imx_fec_data_entry_single(MX25, "imx25-fec"); #endif /* ifdef CONFIG_SOC_IMX25 */ #ifdef CONFIG_SOC_IMX27 const struct imx_fec_data imx27_fec_data __initconst = - imx_fec_data_entry_single(MX27); + imx_fec_data_entry_single(MX27, "imx27-fec"); #endif /* ifdef CONFIG_SOC_IMX27 */ #ifdef CONFIG_SOC_IMX35 +/* i.mx35 has the i.mx27 type fec */ const struct imx_fec_data imx35_fec_data __initconst = - imx_fec_data_entry_single(MX35); + imx_fec_data_entry_single(MX35, "imx27-fec"); #endif #ifdef CONFIG_SOC_IMX50 +/* i.mx50 has the i.mx25 type fec */ const struct imx_fec_data imx50_fec_data __initconst = - imx_fec_data_entry_single(MX50); + imx_fec_data_entry_single(MX50, "imx25-fec"); #endif #ifdef CONFIG_SOC_IMX51 +/* i.mx51 has the i.mx27 type fec */ const struct imx_fec_data imx51_fec_data __initconst = - imx_fec_data_entry_single(MX51); + imx_fec_data_entry_single(MX51, "imx27-fec"); #endif #ifdef CONFIG_SOC_IMX53 +/* i.mx53 has the i.mx25 type fec */ const struct imx_fec_data imx53_fec_data __initconst = - imx_fec_data_entry_single(MX53); + imx_fec_data_entry_single(MX53, "imx25-fec"); #endif struct platform_device *__init imx_add_fec( @@ -63,7 +68,7 @@ struct platform_device *__init imx_add_fec( }, }; - return imx_add_platform_device_dmamask("fec", 0, + return imx_add_platform_device_dmamask(data->devid, 0, res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32)); } diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c index 2b0fdb23beb8..7fa7e9c92468 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-dma.c +++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c @@ -14,7 +14,7 @@ struct platform_device __init __maybe_unused *imx_add_imx_dma(void) "imx-dma", -1, NULL, 0, NULL, 0); } -struct platform_device __init __maybe_unused *imx_add_imx_sdma( +struct platform_device __init __maybe_unused *imx_add_imx_sdma(char *name, resource_size_t iobase, int irq, struct sdma_platform_data *pdata) { struct resource res[] = { @@ -29,6 +29,6 @@ struct platform_device __init __maybe_unused *imx_add_imx_sdma( }, }; - return platform_device_register_resndata(&mxc_ahb_bus, "imx-sdma", + return platform_device_register_resndata(&mxc_ahb_bus, name, -1, res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); } diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c index cfce8c918b73..2020d84956c3 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-uart.c +++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c @@ -152,7 +152,7 @@ struct platform_device *__init imx_add_imx_uart_3irq( }, }; - return imx_add_platform_device("imx-uart", data->id, res, + return imx_add_platform_device("imx1-uart", data->id, res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); } @@ -172,6 +172,7 @@ struct platform_device *__init imx_add_imx_uart_1irq( }, }; - return imx_add_platform_device("imx-uart", data->id, res, ARRAY_SIZE(res), - pdata, sizeof(*pdata)); + /* i.mx21 type uart runs on all i.mx except i.mx1 */ + return imx_add_platform_device("imx21-uart", data->id, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); } diff --git a/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c b/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c index 6b2940b93d94..5955f5da82ee 100644 --- a/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c +++ b/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c @@ -10,21 +10,22 @@ #include <mach/devices-common.h> #include <mach/esdhc.h> -#define imx_sdhci_esdhc_imx_data_entry_single(soc, _id, hwid) \ +#define imx_sdhci_esdhc_imx_data_entry_single(soc, _devid, _id, hwid) \ { \ + .devid = _devid, \ .id = _id, \ .iobase = soc ## _ESDHC ## hwid ## _BASE_ADDR, \ .irq = soc ## _INT_ESDHC ## hwid, \ } -#define imx_sdhci_esdhc_imx_data_entry(soc, id, hwid) \ - [id] = imx_sdhci_esdhc_imx_data_entry_single(soc, id, hwid) +#define imx_sdhci_esdhc_imx_data_entry(soc, devid, id, hwid) \ + [id] = imx_sdhci_esdhc_imx_data_entry_single(soc, devid, id, hwid) #ifdef CONFIG_SOC_IMX25 const struct imx_sdhci_esdhc_imx_data imx25_sdhci_esdhc_imx_data[] __initconst = { #define imx25_sdhci_esdhc_imx_data_entry(_id, _hwid) \ - imx_sdhci_esdhc_imx_data_entry(MX25, _id, _hwid) + imx_sdhci_esdhc_imx_data_entry(MX25, "sdhci-esdhc-imx25", _id, _hwid) imx25_sdhci_esdhc_imx_data_entry(0, 1), imx25_sdhci_esdhc_imx_data_entry(1, 2), }; @@ -34,7 +35,7 @@ imx25_sdhci_esdhc_imx_data[] __initconst = { const struct imx_sdhci_esdhc_imx_data imx35_sdhci_esdhc_imx_data[] __initconst = { #define imx35_sdhci_esdhc_imx_data_entry(_id, _hwid) \ - imx_sdhci_esdhc_imx_data_entry(MX35, _id, _hwid) + imx_sdhci_esdhc_imx_data_entry(MX35, "sdhci-esdhc-imx35", _id, _hwid) imx35_sdhci_esdhc_imx_data_entry(0, 1), imx35_sdhci_esdhc_imx_data_entry(1, 2), imx35_sdhci_esdhc_imx_data_entry(2, 3), @@ -45,7 +46,7 @@ imx35_sdhci_esdhc_imx_data[] __initconst = { const struct imx_sdhci_esdhc_imx_data imx51_sdhci_esdhc_imx_data[] __initconst = { #define imx51_sdhci_esdhc_imx_data_entry(_id, _hwid) \ - imx_sdhci_esdhc_imx_data_entry(MX51, _id, _hwid) + imx_sdhci_esdhc_imx_data_entry(MX51, "sdhci-esdhc-imx51", _id, _hwid) imx51_sdhci_esdhc_imx_data_entry(0, 1), imx51_sdhci_esdhc_imx_data_entry(1, 2), imx51_sdhci_esdhc_imx_data_entry(2, 3), @@ -57,7 +58,7 @@ imx51_sdhci_esdhc_imx_data[] __initconst = { const struct imx_sdhci_esdhc_imx_data imx53_sdhci_esdhc_imx_data[] __initconst = { #define imx53_sdhci_esdhc_imx_data_entry(_id, _hwid) \ - imx_sdhci_esdhc_imx_data_entry(MX53, _id, _hwid) + imx_sdhci_esdhc_imx_data_entry(MX53, "sdhci-esdhc-imx53", _id, _hwid) imx53_sdhci_esdhc_imx_data_entry(0, 1), imx53_sdhci_esdhc_imx_data_entry(1, 2), imx53_sdhci_esdhc_imx_data_entry(2, 3), @@ -65,6 +66,11 @@ imx53_sdhci_esdhc_imx_data[] __initconst = { }; #endif /* ifdef CONFIG_SOC_IMX53 */ +static const struct esdhc_platform_data default_esdhc_pdata __initconst = { + .wp_type = ESDHC_WP_NONE, + .cd_type = ESDHC_CD_NONE, +}; + struct platform_device *__init imx_add_sdhci_esdhc_imx( const struct imx_sdhci_esdhc_imx_data *data, const struct esdhc_platform_data *pdata) @@ -81,6 +87,13 @@ struct platform_device *__init imx_add_sdhci_esdhc_imx( }, }; - return imx_add_platform_device("sdhci-esdhc-imx", data->id, res, + /* + * If machine does not provide pdata, use the default one + * which means no WP/CD support + */ + if (!pdata) + pdata = &default_esdhc_pdata; + + return imx_add_platform_device(data->devid, data->id, res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); } diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index 91fc7cdb5dc9..e4dde91f0231 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -44,6 +44,14 @@ #define UART_PADDR MX51_UART1_BASE_ADDR #endif +/* iMX50/53 have same addresses, but not iMX51 */ +#if defined(CONFIG_SOC_IMX50) || defined(CONFIG_SOC_IMX53) +#ifdef UART_PADDR +#error "CONFIG_DEBUG_LL is incompatible with multiple archs" +#endif +#define UART_PADDR MX53_UART1_BASE_ADDR +#endif + #define UART_VADDR IMX_IO_ADDRESS(UART_PADDR) .macro addruart, rp, rv diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index bf93820ab61c..524538aabc4b 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -30,6 +30,7 @@ static inline struct platform_device *imx_add_platform_device( #include <linux/fec.h> struct imx_fec_data { + const char *devid; resource_size_t iobase; resource_size_t irq; }; @@ -276,6 +277,7 @@ struct platform_device *__init imx_add_mxc_w1( #include <mach/esdhc.h> struct imx_sdhci_esdhc_imx_data { + const char *devid; int id; resource_size_t iobase; resource_size_t irq; @@ -297,5 +299,5 @@ struct platform_device *__init imx_add_spi_imx( const struct spi_imx_master *pdata); struct platform_device *imx_add_imx_dma(void); -struct platform_device *imx_add_imx_sdma( +struct platform_device *imx_add_imx_sdma(char *name, resource_size_t iobase, int irq, struct sdma_platform_data *pdata); diff --git a/arch/arm/plat-mxc/include/mach/dma.h b/arch/arm/plat-mxc/include/mach/dma.h index ef7751546f5f..233d0a5e2d68 100644 --- a/arch/arm/plat-mxc/include/mach/dma.h +++ b/arch/arm/plat-mxc/include/mach/dma.h @@ -60,7 +60,8 @@ static inline int imx_dma_is_ipu(struct dma_chan *chan) static inline int imx_dma_is_general_purpose(struct dma_chan *chan) { - return !strcmp(dev_name(chan->device->dev), "imx-sdma") || + return !strcmp(dev_name(chan->device->dev), "imx31-sdma") || + !strcmp(dev_name(chan->device->dev), "imx35-sdma") || !strcmp(dev_name(chan->device->dev), "imx-dma"); } diff --git a/arch/arm/plat-mxc/include/mach/esdhc.h b/arch/arm/plat-mxc/include/mach/esdhc.h index 86003f411755..aaf97481f413 100644 --- a/arch/arm/plat-mxc/include/mach/esdhc.h +++ b/arch/arm/plat-mxc/include/mach/esdhc.h @@ -10,17 +10,34 @@ #ifndef __ASM_ARCH_IMX_ESDHC_H #define __ASM_ARCH_IMX_ESDHC_H +enum wp_types { + ESDHC_WP_NONE, /* no WP, neither controller nor gpio */ + ESDHC_WP_CONTROLLER, /* mmc controller internal WP */ + ESDHC_WP_GPIO, /* external gpio pin for WP */ +}; + +enum cd_types { + ESDHC_CD_NONE, /* no CD, neither controller nor gpio */ + ESDHC_CD_CONTROLLER, /* mmc controller internal CD */ + ESDHC_CD_GPIO, /* external gpio pin for CD */ + ESDHC_CD_PERMANENT, /* no CD, card permanently wired to host */ +}; + /** - * struct esdhc_platform_data - optional platform data for esdhc on i.MX + * struct esdhc_platform_data - platform data for esdhc on i.MX * - * strongly recommended for i.MX25/35, not needed for other variants + * ESDHC_WP(CD)_CONTROLLER type is not available on i.MX25/35. * - * @wp_gpio: gpio for write_protect (-EINVAL if unused) - * @cd_gpio: gpio for card_detect interrupt (-EINVAL if unused) + * @wp_gpio: gpio for write_protect + * @cd_gpio: gpio for card_detect interrupt + * @wp_type: type of write_protect method (see wp_types enum above) + * @cd_type: type of card_detect method (see cd_types enum above) */ struct esdhc_platform_data { unsigned int wp_gpio; unsigned int cd_gpio; + enum wp_types wp_type; + enum cd_types cd_type; }; #endif /* __ASM_ARCH_IMX_ESDHC_H */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h index 9440b9e00e89..5408fd1fc736 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h @@ -30,6 +30,9 @@ #define MX53_SDHC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH | \ PAD_CTL_SRE_FAST) +#define PAD_CTRL_I2C (PAD_CTL_SRE_FAST | PAD_CTL_ODE | PAD_CTL_PKE | \ + PAD_CTL_PUE | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP \ + | PAD_CTL_HYS) #define _MX53_PAD_GPIO_19__KPP_COL_5 IOMUX_PAD(0x348, 0x20, 0, 0x840, 0, 0) #define _MX53_PAD_GPIO_19__GPIO4_5 IOMUX_PAD(0x348, 0x20, 1, 0x0, 0, 0) @@ -1256,7 +1259,7 @@ #define MX53_PAD_KEY_COL3__GPIO4_12 (_MX53_PAD_KEY_COL3__GPIO4_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL3__USBOH3_H2_DP (_MX53_PAD_KEY_COL3__USBOH3_H2_DP | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL3__SPDIF_IN1 (_MX53_PAD_KEY_COL3__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_KEY_COL3__I2C2_SCL (_MX53_PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL3__I2C2_SCL (_MX53_PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_KEY_COL3__ECSPI1_SS3 (_MX53_PAD_KEY_COL3__ECSPI1_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL3__FEC_CRS (_MX53_PAD_KEY_COL3__FEC_CRS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK (_MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1264,7 +1267,7 @@ #define MX53_PAD_KEY_ROW3__GPIO4_13 (_MX53_PAD_KEY_ROW3__GPIO4_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW3__USBOH3_H2_DM (_MX53_PAD_KEY_ROW3__USBOH3_H2_DM | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK (_MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_KEY_ROW3__I2C2_SDA (_MX53_PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW3__I2C2_SDA (_MX53_PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT (_MX53_PAD_KEY_ROW3__OSC32K_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP (_MX53_PAD_KEY_ROW3__CCM_PLL4_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 (_MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1536,7 +1539,7 @@ #define MX53_PAD_CSI0_DAT8__KPP_COL_7 (_MX53_PAD_CSI0_DAT8__KPP_COL_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK (_MX53_PAD_CSI0_DAT8__ECSPI2_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC (_MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT8__I2C1_SDA (_MX53_PAD_CSI0_DAT8__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT8__I2C1_SDA (_MX53_PAD_CSI0_DAT8__I2C1_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 (_MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 (_MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 (_MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1544,7 +1547,7 @@ #define MX53_PAD_CSI0_DAT9__KPP_ROW_7 (_MX53_PAD_CSI0_DAT9__KPP_ROW_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI (_MX53_PAD_CSI0_DAT9__ECSPI2_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR (_MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT9__I2C1_SCL (_MX53_PAD_CSI0_DAT9__I2C1_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT9__I2C1_SCL (_MX53_PAD_CSI0_DAT9__I2C1_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 (_MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 (_MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 (_MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1631,25 +1634,25 @@ #define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK (_MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS (_MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_EB2__ECSPI1_SS0 (_MX53_PAD_EIM_EB2__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_EB2__I2C2_SCL (_MX53_PAD_EIM_EB2__I2C2_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB2__I2C2_SCL (_MX53_PAD_EIM_EB2__I2C2_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D16__EMI_WEIM_D_16 (_MX53_PAD_EIM_D16__EMI_WEIM_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D16__GPIO3_16 (_MX53_PAD_EIM_D16__GPIO3_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D16__IPU_DI0_PIN5 (_MX53_PAD_EIM_D16__IPU_DI0_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK (_MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D16__ECSPI1_SCLK (_MX53_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D16__I2C2_SDA (_MX53_PAD_EIM_D16__I2C2_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D16__I2C2_SDA (_MX53_PAD_EIM_D16__I2C2_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D17__EMI_WEIM_D_17 (_MX53_PAD_EIM_D17__EMI_WEIM_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D17__GPIO3_17 (_MX53_PAD_EIM_D17__GPIO3_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D17__IPU_DI0_PIN6 (_MX53_PAD_EIM_D17__IPU_DI0_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN (_MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D17__ECSPI1_MISO (_MX53_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D17__I2C3_SCL (_MX53_PAD_EIM_D17__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D17__I2C3_SCL (_MX53_PAD_EIM_D17__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D18__EMI_WEIM_D_18 (_MX53_PAD_EIM_D18__EMI_WEIM_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D18__GPIO3_18 (_MX53_PAD_EIM_D18__GPIO3_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D18__IPU_DI0_PIN7 (_MX53_PAD_EIM_D18__IPU_DI0_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO (_MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D18__ECSPI1_MOSI (_MX53_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D18__I2C3_SDA (_MX53_PAD_EIM_D18__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D18__I2C3_SDA (_MX53_PAD_EIM_D18__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D18__IPU_DI1_D0_CS (_MX53_PAD_EIM_D18__IPU_DI1_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D19__EMI_WEIM_D_19 (_MX53_PAD_EIM_D19__EMI_WEIM_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D19__GPIO3_19 (_MX53_PAD_EIM_D19__GPIO3_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1672,7 +1675,7 @@ #define MX53_PAD_EIM_D21__IPU_DI0_PIN17 (_MX53_PAD_EIM_D21__IPU_DI0_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK (_MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D21__CSPI_SCLK (_MX53_PAD_EIM_D21__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D21__I2C1_SCL (_MX53_PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D21__I2C1_SCL (_MX53_PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC (_MX53_PAD_EIM_D21__USBOH3_USBOTG_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D22__EMI_WEIM_D_22 (_MX53_PAD_EIM_D22__EMI_WEIM_D_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D22__GPIO3_22 (_MX53_PAD_EIM_D22__GPIO3_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1732,7 +1735,7 @@ #define MX53_PAD_EIM_D28__UART2_CTS (_MX53_PAD_EIM_D28__UART2_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO (_MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D28__CSPI_MOSI (_MX53_PAD_EIM_D28__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D28__I2C1_SDA (_MX53_PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D28__I2C1_SDA (_MX53_PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D28__IPU_EXT_TRIG (_MX53_PAD_EIM_D28__IPU_EXT_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D28__IPU_DI0_PIN13 (_MX53_PAD_EIM_D28__IPU_DI0_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D29__EMI_WEIM_D_29 (_MX53_PAD_EIM_D29__EMI_WEIM_D_29 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2297,7 +2300,7 @@ #define MX53_PAD_GPIO_9__SCC_FAIL_STATE (_MX53_PAD_GPIO_9__SCC_FAIL_STATE | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_3__ESAI1_HCKR (_MX53_PAD_GPIO_3__ESAI1_HCKR | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_3__GPIO1_3 (_MX53_PAD_GPIO_3__GPIO1_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_GPIO_3__I2C3_SCL (_MX53_PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_3__I2C3_SCL (_MX53_PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN (_MX53_PAD_GPIO_3__DPLLIP1_TOG_EN | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_3__CCM_CLKO2 (_MX53_PAD_GPIO_3__CCM_CLKO2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 (_MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2305,7 +2308,7 @@ #define MX53_PAD_GPIO_3__MLB_MLBCLK (_MX53_PAD_GPIO_3__MLB_MLBCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_6__ESAI1_SCKT (_MX53_PAD_GPIO_6__ESAI1_SCKT | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_6__GPIO1_6 (_MX53_PAD_GPIO_6__GPIO1_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_GPIO_6__I2C3_SDA (_MX53_PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_6__I2C3_SDA (_MX53_PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_GPIO_6__CCM_CCM_OUT_0 (_MX53_PAD_GPIO_6__CCM_CCM_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB (_MX53_PAD_GPIO_6__CSU_CSU_INT_DEB | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 (_MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2333,7 +2336,7 @@ #define MX53_PAD_GPIO_5__CCM_CLKO (_MX53_PAD_GPIO_5__CCM_CLKO | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 (_MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 (_MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_GPIO_5__I2C3_SCL (_MX53_PAD_GPIO_5__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_5__I2C3_SCL (_MX53_PAD_GPIO_5__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_GPIO_5__CCM_PLL1_BYP (_MX53_PAD_GPIO_5__CCM_PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_7__ESAI1_TX4_RX1 (_MX53_PAD_GPIO_7__ESAI1_TX4_RX1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_7__GPIO1_7 (_MX53_PAD_GPIO_7__GPIO1_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2356,7 +2359,7 @@ #define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT (_MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 (_MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_16__SPDIF_IN1 (_MX53_PAD_GPIO_16__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_GPIO_16__I2C3_SDA (_MX53_PAD_GPIO_16__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_16__I2C3_SDA (_MX53_PAD_GPIO_16__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_GPIO_16__SJC_DE_B (_MX53_PAD_GPIO_16__SJC_DE_B | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_17__ESAI1_TX0 (_MX53_PAD_GPIO_17__ESAI1_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_17__GPIO7_12 (_MX53_PAD_GPIO_17__GPIO7_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) diff --git a/arch/arm/plat-mxc/include/mach/sdma.h b/arch/arm/plat-mxc/include/mach/sdma.h index f495c87c113f..3a3942823c20 100644 --- a/arch/arm/plat-mxc/include/mach/sdma.h +++ b/arch/arm/plat-mxc/include/mach/sdma.h @@ -48,12 +48,10 @@ struct sdma_script_start_addrs { /** * struct sdma_platform_data - platform specific data for SDMA engine * - * @sdma_version The version of this SDMA engine * @fw_name The firmware name * @script_addrs SDMA scripts addresses in SDMA ROM */ struct sdma_platform_data { - int sdma_version; char *fw_name; struct sdma_script_start_addrs *script_addrs; }; diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 6e6735f04ee3..bb8f4a6b3e37 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -13,6 +13,7 @@ config ARCH_OMAP1 bool "TI OMAP1" select CLKDEV_LOOKUP select CLKSRC_MMIO + select GENERIC_IRQ_CHIP help "Systems based on omap7xx, omap15xx or omap16xx" diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index d1c916fcf770..dc562a5c0a8a 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -195,6 +195,11 @@ #define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */ #define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */ + +/* Only for AM35xx */ +#define AM35XX_DMA_UART4_TX 54 +#define AM35XX_DMA_UART4_RX 55 + /*----------------------------------------------------------------------------*/ #define OMAP1_DMA_TOUT_IRQ (1 << 0) diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 926d25c780f3..30e10719b774 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -357,6 +357,7 @@ #define INT_35XX_EMAC_C0_TX_PULSE_IRQ 69 #define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70 #define INT_35XX_USBOTG_IRQ 71 +#define INT_35XX_UART4 84 #define INT_35XX_CCDC_VD0_IRQ 88 #define INT_35XX_CCDC_VD1_IRQ 92 #define INT_35XX_CCDC_VD2_IRQ 93 diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index 2723f9166ea2..de3b10c18127 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -56,6 +56,9 @@ #define TI816X_UART2_BASE 0x48022000 #define TI816X_UART3_BASE 0x48024000 +/* AM3505/3517 UART4 */ +#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */ + /* External port on Zoom2/3 */ #define ZOOM_UART_BASE 0x10000000 #define ZOOM_UART_VIRT 0xfa400000 diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c index c60737c49a32..79e7fedb8602 100644 --- a/arch/arm/plat-omap/iovmm.c +++ b/arch/arm/plat-omap/iovmm.c @@ -423,9 +423,6 @@ static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, u32 da, { unsigned int i; struct scatterlist *sg; - void *va; - - va = phys_to_virt(pa); for_each_sg(sgt->sgl, sg, sgt->nents, i) { unsigned bytes; diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index b6b409744954..02609eee0562 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -615,6 +615,9 @@ static int _od_resume_noirq(struct device *dev) return pm_generic_resume_noirq(dev); } +#else +#define _od_suspend_noirq NULL +#define _od_resume_noirq NULL #endif static struct dev_pm_domain omap_device_pm_domain = { @@ -622,7 +625,8 @@ static struct dev_pm_domain omap_device_pm_domain = { SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume, _od_runtime_idle) USE_PLATFORM_PM_SLEEP_OPS - SET_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq, _od_resume_noirq) + .suspend_noirq = _od_suspend_noirq, + .resume_noirq = _od_resume_noirq, } }; diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c index 02af235298e2..5f84a3f13ef9 100644 --- a/arch/arm/plat-s5p/clock.c +++ b/arch/arm/plat-s5p/clock.c @@ -192,7 +192,7 @@ unsigned long s5p_spdif_get_rate(struct clk *clk) if (IS_ERR(pclk)) return -EINVAL; - rate = pclk->ops->get_rate(clk); + rate = pclk->ops->get_rate(pclk); clk_put(pclk); return rate; diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index 327ab9f662e8..f88216d23991 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -23,6 +23,8 @@ #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> +#include <asm/mach/irq.h> + #define GPIO_BASE(chip) (((unsigned long)(chip)->base) & 0xFFFFF000u) #define CON_OFFSET 0x700 @@ -81,6 +83,9 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) int group, pend_offset, mask_offset; unsigned int pend, mask; + struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); + for (group = 0; group < bank->nr_groups; group++) { struct s3c_gpio_chip *chip = bank->chips[group]; if (!chip) @@ -102,23 +107,25 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) pend &= ~BIT(offset); } } + chained_irq_exit(chip, desc); } static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) { static int used_gpioint_groups = 0; int group = chip->group; - struct s5p_gpioint_bank *bank = NULL; + struct s5p_gpioint_bank *b, *bank = NULL; struct irq_chip_generic *gc; struct irq_chip_type *ct; if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT) return -ENOMEM; - list_for_each_entry(bank, &banks, list) { - if (group >= bank->start && - group < bank->start + bank->nr_groups) + list_for_each_entry(b, &banks, list) { + if (group >= b->start && group < b->start + b->nr_groups) { + bank = b; break; + } } if (!bank) return -EINVAL; diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 302c42670bd1..3b4451979d1b 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -64,6 +64,17 @@ static LIST_HEAD(clocks); */ DEFINE_SPINLOCK(clocks_lock); +/* Global watchdog clock used by arch_wtd_reset() callback */ +struct clk *s3c2410_wdtclk; +static int __init s3c_wdt_reset_init(void) +{ + s3c2410_wdtclk = clk_get(NULL, "watchdog"); + if (IS_ERR(s3c2410_wdtclk)) + printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); + return 0; +} +arch_initcall(s3c_wdt_reset_init); + /* enable and disable calls for use with the clk struct */ static int clk_null_enable(struct clk *clk, int enable) diff --git a/arch/arm/plat-samsung/include/plat/backlight.h b/arch/arm/plat-samsung/include/plat/backlight.h index 51d8da846a62..ad530c78fe8c 100644 --- a/arch/arm/plat-samsung/include/plat/backlight.h +++ b/arch/arm/plat-samsung/include/plat/backlight.h @@ -20,7 +20,7 @@ struct samsung_bl_gpio_info { int func; }; -extern void samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, +extern void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, struct platform_pwm_backlight_data *bl_data); #endif /* __ASM_PLAT_BACKLIGHT_H */ diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index 87d5b38a86fb..73c66d4d10fa 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -9,6 +9,9 @@ * published by the Free Software Foundation. */ +#ifndef __ASM_PLAT_CLOCK_H +#define __ASM_PLAT_CLOCK_H __FILE__ + #include <linux/spinlock.h> #include <linux/clkdev.h> @@ -121,3 +124,8 @@ extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable); extern void s3c_pwmclk_init(void); +/* Global watchdog clock used by arch_wtd_reset() callback */ + +extern struct clk *s3c2410_wdtclk; + +#endif /* __ASM_PLAT_CLOCK_H */ diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h index 54b762acb5a0..40dbb2b0ae22 100644 --- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h +++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include <plat/clock.h> #include <plat/regs-watchdog.h> #include <mach/map.h> @@ -19,17 +20,12 @@ static inline void arch_wdt_reset(void) { - struct clk *wdtclk; - printk("arch_reset: attempting watchdog reset\n"); __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ - wdtclk = clk_get(NULL, "watchdog"); - if (!IS_ERR(wdtclk)) { - clk_enable(wdtclk); - } else - printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); + if (s3c2410_wdtclk) + clk_enable(s3c2410_wdtclk); /* put initial values into count and data */ __raw_writel(0x80, S3C2410_WTCNT); diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c index f714d060370d..51583cd30164 100644 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -22,9 +22,14 @@ #include <plat/irq-vic-timer.h> #include <plat/regs-timer.h> +#include <asm/mach/irq.h> + static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc) { + struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); generic_handle_irq((int)desc->irq_data.handler_data); + chained_irq_exit(chip, desc); } /* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */ diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 3b3776d0a1a7..62cc8f981171 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -351,7 +351,7 @@ centro MACH_CENTRO CENTRO 1944 nokia_rx51 MACH_NOKIA_RX51 NOKIA_RX51 1955 omap_zoom2 MACH_OMAP_ZOOM2 OMAP_ZOOM2 1967 cpuat9260 MACH_CPUAT9260 CPUAT9260 1973 -eukrea_cpuimx27 MACH_CPUIMX27 CPUIMX27 1975 +eukrea_cpuimx27 MACH_EUKREA_CPUIMX27 EUKREA_CPUIMX27 1975 acs5k MACH_ACS5K ACS5K 1982 snapper_9260 MACH_SNAPPER_9260 SNAPPER_9260 1987 dsm320 MACH_DSM320 DSM320 1988 @@ -476,8 +476,8 @@ cns3420vb MACH_CNS3420VB CNS3420VB 2776 omap4_panda MACH_OMAP4_PANDA OMAP4_PANDA 2791 ti8168evm MACH_TI8168EVM TI8168EVM 2800 teton_bga MACH_TETON_BGA TETON_BGA 2816 -eukrea_cpuimx25sd MACH_EUKREA_CPUIMX25 EUKREA_CPUIMX25 2820 -eukrea_cpuimx35sd MACH_EUKREA_CPUIMX35 EUKREA_CPUIMX35 2821 +eukrea_cpuimx25sd MACH_EUKREA_CPUIMX25SD EUKREA_CPUIMX25SD 2820 +eukrea_cpuimx35sd MACH_EUKREA_CPUIMX35SD EUKREA_CPUIMX35SD 2821 eukrea_cpuimx51sd MACH_EUKREA_CPUIMX51SD EUKREA_CPUIMX51SD 2822 eukrea_cpuimx51 MACH_EUKREA_CPUIMX51 EUKREA_CPUIMX51 2823 smdkc210 MACH_SMDKC210 SMDKC210 2838 @@ -910,7 +910,7 @@ omapl138_case_a3 MACH_OMAPL138_CASE_A3 OMAPL138_CASE_A3 3280 uemd MACH_UEMD UEMD 3281 ccwmx51mut MACH_CCWMX51MUT CCWMX51MUT 3282 rockhopper MACH_ROCKHOPPER ROCKHOPPER 3283 -nookcolor MACH_NOOKCOLOR NOOKCOLOR 3284 +encore MACH_ENCORE ENCORE 3284 hkdkc100 MACH_HKDKC100 HKDKC100 3285 ts42xx MACH_TS42XX TS42XX 3286 aebl MACH_AEBL AEBL 3287 |