diff options
Diffstat (limited to 'arch/arm')
187 files changed, 2114 insertions, 920 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2c71a8f3535a..380e4f016654 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -3,7 +3,7 @@ config ARM default y select HAVE_AOUT select HAVE_DMA_API_DEBUG - select HAVE_IDE + select HAVE_IDE if PCI || ISA || PCMCIA select HAVE_MEMBLOCK select RTC_LIB select SYS_SUPPORTS_APM_EMULATION @@ -195,8 +195,8 @@ config VECTORS_BASE The base address of exception vectors. config ARM_PATCH_PHYS_VIRT - bool "Patch physical to virtual translations at runtime (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "Patch physical to virtual translations at runtime" if EMBEDDED + default y depends on !XIP_KERNEL && MMU depends on !ARCH_REALVIEW || !SPARSEMEM help @@ -205,16 +205,12 @@ config ARM_PATCH_PHYS_VIRT kernel in system memory. This can only be used with non-XIP MMU kernels where the base - of physical memory is at a 16MB boundary, or theoretically 64K - for the MSM machine class. + of physical memory is at a 16MB boundary. + + Only disable this option if you know that you do not require + this feature (eg, building a kernel for a single machine) and + you need to shrink the kernel to the minimal size. -config ARM_PATCH_PHYS_VIRT_16BIT - def_bool y - depends on ARM_PATCH_PHYS_VIRT && ARCH_MSM - help - This option extends the physical to virtual translation patching - to allow physical memory down to a theoretical minimum of 64K - boundaries. source "init/Kconfig" @@ -302,7 +298,6 @@ config ARCH_AT91 select ARCH_REQUIRE_GPIOLIB select HAVE_CLK select CLKDEV_LOOKUP - select ARM_PATCH_PHYS_VIRT if MMU help This enables support for systems based on the Atmel AT91RM9200, AT91SAM9 and AT91CAP9 processors. @@ -386,6 +381,7 @@ config ARCH_FOOTBRIDGE select CPU_SA110 select FOOTBRIDGE select GENERIC_CLOCKEVENTS + select HAVE_IDE help Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. @@ -632,6 +628,8 @@ config ARCH_PXA select SPARSE_IRQ select AUTO_ZRELADDR select MULTI_IRQ_HANDLER + select ARM_CPU_SUSPEND if PM + select HAVE_IDE help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. @@ -672,6 +670,7 @@ config ARCH_RPC select NO_IOPORT select ARCH_SPARSEMEM_ENABLE select ARCH_USES_GETTIMEOFFSET + select HAVE_IDE help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. @@ -690,6 +689,7 @@ config ARCH_SA1100 select HAVE_SCHED_CLOCK select TICK_ONESHOT select ARCH_REQUIRE_GPIOLIB + select HAVE_IDE help Support for StrongARM 11x0 based boards. @@ -1272,6 +1272,32 @@ config ARM_ERRATA_754327 This workaround defines cpu_relax() as smp_mb(), preventing correctly written polling loops from denying visibility of updates to memory. +config ARM_ERRATA_364296 + bool "ARM errata: Possible cache data corruption with hit-under-miss enabled" + depends on CPU_V6 && !SMP + help + This options enables the workaround for the 364296 ARM1136 + r0p2 erratum (possible cache data corruption with + hit-under-miss enabled). It sets the undocumented bit 31 in + the auxiliary control register and the FI bit in the control + register, thus disabling hit-under-miss without putting the + processor into full low interrupt latency mode. ARM11MPCore + is not affected. + +config ARM_ERRATA_764369 + bool "ARM errata: Data cache line maintenance operation by MVA may not succeed" + depends on CPU_V7 && SMP + help + This option enables the workaround for erratum 764369 + affecting Cortex-A9 MPCore with two or more processors (all + current revisions). Under certain timing circumstances, a data + cache line maintenance operation by MVA targeting an Inner + Shareable memory region may fail to proceed up to either the + Point of Coherency or to the Point of Unification of the + system. This workaround adds a DSB instruction before the + relevant cache maintenance functions and sets a specific bit + in the diagnostic control register of the SCU. + endmenu source "arch/arm/common/Kconfig" @@ -1350,6 +1376,7 @@ config SMP MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \ ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \ ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE + depends on MMU select USE_GENERIC_SMP_HELPERS select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP help @@ -1382,6 +1409,31 @@ config SMP_ON_UP If you don't know what to do here, say Y. +config ARM_CPU_TOPOLOGY + bool "Support cpu topology definition" + depends on SMP && CPU_V7 + default y + help + Support ARM cpu topology definition. The MPIDR register defines + affinity between processors which is then used to describe the cpu + topology of an ARM System. + +config SCHED_MC + bool "Multi-core scheduler support" + depends on ARM_CPU_TOPOLOGY + help + Multi-core scheduler support improves the CPU scheduler's decision + making when dealing with multi-core CPU chips at a cost of slightly + increased overhead in some places. If unsure say N here. + +config SCHED_SMT + bool "SMT scheduler support" + depends on ARM_CPU_TOPOLOGY + help + Improves the CPU scheduler's decision making when dealing with + MultiThreading at a cost of slightly increased overhead in some + places. If unsure say N here. + config HAVE_ARM_SCU bool help @@ -1457,6 +1509,7 @@ config THUMB2_KERNEL depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL select AEABI select ARM_ASM_UNIFIED + select ARM_UNWIND help By enabling this option, the kernel will be compiled in Thumb-2 mode. A compiler/assembler that understand the unified @@ -2076,6 +2129,9 @@ config ARCH_SUSPEND_POSSIBLE CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE def_bool y +config ARM_CPU_SUSPEND + def_bool PM_SLEEP + endmenu source "net/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 81cbe40c159c..df3eb3ccd769 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -65,13 +65,71 @@ config DEBUG_USER # These options are only for real kernel hackers who want to get their hands dirty. config DEBUG_LL - bool "Kernel low-level debugging functions" + bool "Kernel low-level debugging functions (read help!)" depends on DEBUG_KERNEL help Say Y here to include definitions of printascii, printch, printhex in the kernel. This is helpful if you are debugging code that executes before the console is initialized. + Note that selecting this option will limit the kernel to a single + UART definition, as specified below. Attempting to boot the kernel + image on a different platform *will not work*, so this option should + not be enabled for kernels that are intended to be portable. + +choice + prompt "Kernel low-level debugging port" + depends on DEBUG_LL + + config DEBUG_LL_UART_NONE + bool "No low-level debugging UART" + help + Say Y here if your platform doesn't provide a UART option + below. This relies on your platform choosing the right UART + definition internally in order for low-level debugging to + work. + + config DEBUG_ICEDCC + bool "Kernel low-level debugging via EmbeddedICE DCC channel" + help + Say Y here if you want the debug print routines to direct + their output to the EmbeddedICE macrocell's DCC channel using + co-processor 14. This is known to work on the ARM9 style ICE + channel and on the XScale with the PEEDI. + + Note that the system will appear to hang during boot if there + is nothing connected to read from the DCC. + + config DEBUG_FOOTBRIDGE_COM1 + bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the 8250 at PCI COM1. + + config DEBUG_DC21285_PORT + bool "Kernel low-level debugging messages via footbridge serial port" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the serial port in the DC21285 (Footbridge). + + config DEBUG_CLPS711X_UART1 + bool "Kernel low-level debugging messages via UART1" + depends on ARCH_CLPS711X + help + Say Y here if you want the debug print routines to direct + their output to the first serial port on these devices. + + config DEBUG_CLPS711X_UART2 + bool "Kernel low-level debugging messages via UART2" + depends on ARCH_CLPS711X + help + Say Y here if you want the debug print routines to direct + their output to the second serial port on these devices. + +endchoice + config EARLY_PRINTK bool "Early printk" depends on DEBUG_LL @@ -80,43 +138,14 @@ config EARLY_PRINTK kernel low-level debugging functions. Add earlyprintk to your kernel parameters to enable this console. -config DEBUG_ICEDCC - bool "Kernel low-level debugging via EmbeddedICE DCC channel" - depends on DEBUG_LL - help - Say Y here if you want the debug print routines to direct their - output to the EmbeddedICE macrocell's DCC channel using - co-processor 14. This is known to work on the ARM9 style ICE - channel and on the XScale with the PEEDI. - - It does include a timeout to ensure that the system does not - totally freeze when there is nothing connected to read. - config OC_ETM bool "On-chip ETM and ETB" - select ARM_AMBA + depends on ARM_AMBA help Enables the on-chip embedded trace macrocell and embedded trace buffer driver that will allow you to collect traces of the kernel code. -config DEBUG_DC21285_PORT - bool "Kernel low-level debugging messages via footbridge serial port" - depends on DEBUG_LL && FOOTBRIDGE - help - Say Y here if you want the debug print routines to direct their - output to the serial port in the DC21285 (Footbridge). Saying N - will cause the debug messages to appear on the first 16550 - serial port. - -config DEBUG_CLPS711X_UART2 - bool "Kernel low-level debugging messages via UART2" - depends on DEBUG_LL && ARCH_CLPS711X - help - Say Y here if you want the debug print routines to direct their - output to the second serial port on these devices. Saying N will - cause the debug messages to appear on the first serial port. - config DEBUG_S3C_UART depends on PLAT_SAMSUNG int "S3C UART to use for low-level debug" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 70c424eaf7b0..5665c2a3b652 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -128,6 +128,9 @@ textofs-$(CONFIG_PM_H1940) := 0x00108000 ifeq ($(CONFIG_ARCH_SA1100),y) textofs-$(CONFIG_SA1111) := 0x00208000 endif +textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000 +textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000 +textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. diff --git a/arch/arm/boot/compressed/mmcif-sh7372.c b/arch/arm/boot/compressed/mmcif-sh7372.c index b6f61d9a5a1b..672ae95db5c3 100644 --- a/arch/arm/boot/compressed/mmcif-sh7372.c +++ b/arch/arm/boot/compressed/mmcif-sh7372.c @@ -82,7 +82,7 @@ asmlinkage void mmc_loader(unsigned char *buf, unsigned long len) /* Disable clock to MMC hardware block */ - __raw_writel(__raw_readl(SMSTPCR3) & (1 << 12), SMSTPCR3); + __raw_writel(__raw_readl(SMSTPCR3) | (1 << 12), SMSTPCR3); mmc_update_progress(MMC_PROGRESS_DONE); } diff --git a/arch/arm/boot/compressed/sdhi-sh7372.c b/arch/arm/boot/compressed/sdhi-sh7372.c index d403a8b24d7f..d279294f2381 100644 --- a/arch/arm/boot/compressed/sdhi-sh7372.c +++ b/arch/arm/boot/compressed/sdhi-sh7372.c @@ -85,7 +85,7 @@ asmlinkage void mmc_loader(unsigned short *buf, unsigned long len) goto err; /* Disable clock to SDHI1 hardware block */ - __raw_writel(__raw_readl(SMSTPCR3) & (1 << 13), SMSTPCR3); + __raw_writel(__raw_readl(SMSTPCR3) | (1 << 13), SMSTPCR3); mmc_update_progress(MMC_PROGRESS_DONE); diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts index 4c053340ce33..e5818668d091 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -57,14 +57,14 @@ }; sdhci@c8000200 { - gpios = <&gpio 69 0>, /* cd, gpio PI5 */ - <&gpio 57 0>, /* wp, gpio PH1 */ - <&gpio 155 0>; /* power, gpio PT3 */ + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 155 0>; /* gpio PT3 */ }; sdhci@c8000600 { - gpios = <&gpio 58 0>, /* cd, gpio PH2 */ - <&gpio 59 0>, /* wp, gpio PH3 */ - <&gpio 70 0>; /* power, gpio PI6 */ + cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ }; }; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts index 1940cae00748..64cedca6fc79 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -21,8 +21,8 @@ }; sdhci@c8000400 { - gpios = <&gpio 69 0>, /* cd, gpio PI5 */ - <&gpio 57 0>, /* wp, gpio PH1 */ - <&gpio 70 0>; /* power, gpio PI6 */ + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ }; }; diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 3227ca952a12..666b278e56d7 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -180,7 +180,7 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, return -EINVAL; mask = 0xff << shift; - bit = 1 << (cpu + shift); + bit = 1 << (cpu_logical_map(cpu) + shift); spin_lock(&irq_controller_lock); val = readl_relaxed(reg) & ~mask; @@ -259,9 +259,15 @@ static void __init gic_dist_init(struct gic_chip_data *gic, unsigned int irq_start) { unsigned int gic_irqs, irq_limit, i; + u32 cpumask; void __iomem *base = gic->dist_base; - u32 cpumask = 1 << smp_processor_id(); + u32 cpu = 0; +#ifdef CONFIG_SMP + cpu = cpu_logical_map(smp_processor_id()); +#endif + + cpumask = 1 << cpu; cpumask |= cpumask << 8; cpumask |= cpumask << 16; @@ -382,7 +388,12 @@ void __cpuinit gic_enable_ppi(unsigned int irq) #ifdef CONFIG_SMP void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) { - unsigned long map = *cpus_addr(*mask); + int cpu; + unsigned long map = 0; + + /* Convert our logical CPU mask into a physical one. */ + for_each_cpu(cpu, mask) + map |= 1 << cpu_logical_map(cpu); /* * Ensure that stores to Normal memory are visible to the diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index 7aa4262ada7a..01f18a421b17 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -259,7 +259,6 @@ static void __init vic_disable(void __iomem *base) writel(0, base + VIC_INT_SELECT); writel(0, base + VIC_INT_ENABLE); writel(~0, base + VIC_INT_ENABLE_CLEAR); - writel(0, base + VIC_IRQ_STATUS); writel(0, base + VIC_ITCR); writel(~0, base + VIC_INT_SOFT_CLEAR); } @@ -347,7 +346,8 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, /* Identify which VIC cell this one is, by reading the ID */ for (i = 0; i < 4; i++) { - u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4); + void __iomem *addr; + addr = (void __iomem *)((u32)base & PAGE_MASK) + 0xfe0 + (i * 4); cellid |= (readl(addr) & 0xff) << (8 * i); } vendor = (cellid >> 12) & 0xff; diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index cd4458f64171..cb47d28cbe1f 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -8,6 +8,7 @@ #define CPUID_CACHETYPE 1 #define CPUID_TCM 2 #define CPUID_TLBTYPE 3 +#define CPUID_MPIDR 5 #define CPUID_EXT_PFR0 "c1, 0" #define CPUID_EXT_PFR1 "c1, 1" @@ -70,6 +71,11 @@ static inline unsigned int __attribute_const__ read_cpuid_tcmstatus(void) return read_cpuid(CPUID_TCM); } +static inline unsigned int __attribute_const__ read_cpuid_mpidr(void) +{ + return read_cpuid(CPUID_MPIDR); +} + /* * Intel's XScale3 core supports some v6 features (supersections, L2) * but advertises itself as v5 as it does not support the v6 ISA. For diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 7a21d0bf7134..28b7ee8d7398 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -32,7 +32,7 @@ static inline unsigned long dma_to_pfn(struct device *dev, dma_addr_t addr) static inline void *dma_to_virt(struct device *dev, dma_addr_t addr) { - return (void *)__bus_to_virt(addr); + return (void *)__bus_to_virt((unsigned long)addr); } static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) diff --git a/arch/arm/include/asm/exception.h b/arch/arm/include/asm/exception.h new file mode 100644 index 000000000000..5abaf5bbd985 --- /dev/null +++ b/arch/arm/include/asm/exception.h @@ -0,0 +1,19 @@ +/* + * Annotations for marking C functions as exception handlers. + * + * These should only be used for C functions that are called from the low + * level exception entry code and not any intervening C code. + */ +#ifndef __ASM_ARM_EXCEPTION_H +#define __ASM_ARM_EXCEPTION_H + +#include <linux/ftrace.h> + +#define __exception __attribute__((section(".exception.text"))) +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +#define __exception_irq_entry __irq_entry +#else +#define __exception_irq_entry __exception +#endif + +#endif /* __ASM_ARM_EXCEPTION_H */ diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 8c73900da9ed..253cc86318bf 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -25,17 +25,17 @@ #ifdef CONFIG_SMP -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ +#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ smp_mb(); \ __asm__ __volatile__( \ - "1: ldrex %1, [%2]\n" \ + "1: ldrex %1, [%3]\n" \ " " insn "\n" \ - "2: strex %1, %0, [%2]\n" \ - " teq %1, #0\n" \ + "2: strex %2, %0, [%3]\n" \ + " teq %2, #0\n" \ " bne 1b\n" \ " mov %0, #0\n" \ - __futex_atomic_ex_table("%4") \ - : "=&r" (ret), "=&r" (oldval) \ + __futex_atomic_ex_table("%5") \ + : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") @@ -73,14 +73,14 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, #include <linux/preempt.h> #include <asm/domain.h> -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ +#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ __asm__ __volatile__( \ - "1: " T(ldr) " %1, [%2]\n" \ + "1: " T(ldr) " %1, [%3]\n" \ " " insn "\n" \ - "2: " T(str) " %0, [%2]\n" \ + "2: " T(str) " %0, [%3]\n" \ " mov %0, #0\n" \ - __futex_atomic_ex_table("%4") \ - : "=&r" (ret), "=&r" (oldval) \ + __futex_atomic_ex_table("%5") \ + : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") @@ -117,7 +117,7 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) int cmp = (encoded_op >> 24) & 15; int oparg = (encoded_op << 8) >> 20; int cmparg = (encoded_op << 20) >> 20; - int oldval = 0, ret; + int oldval = 0, ret, tmp; if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) oparg = 1 << oparg; @@ -129,19 +129,19 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) switch (op) { case FUTEX_OP_SET: - __futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("mov %0, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_ADD: - __futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("add %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_OR: - __futex_atomic_op("orr %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("orr %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_ANDN: - __futex_atomic_op("and %0, %1, %3", ret, oldval, uaddr, ~oparg); + __futex_atomic_op("and %0, %1, %4", ret, oldval, tmp, uaddr, ~oparg); break; case FUTEX_OP_XOR: - __futex_atomic_op("eor %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("eor %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; default: ret = -ENOSYS; diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 16bd48031583..434edccdf7f3 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -45,8 +45,15 @@ #define L2X0_CLEAN_INV_LINE_PA 0x7F0 #define L2X0_CLEAN_INV_LINE_IDX 0x7F8 #define L2X0_CLEAN_INV_WAY 0x7FC -#define L2X0_LOCKDOWN_WAY_D 0x900 -#define L2X0_LOCKDOWN_WAY_I 0x904 +/* + * The lockdown registers repeat 8 times for L310, the L210 has only one + * D and one I lockdown register at 0x0900 and 0x0904. + */ +#define L2X0_LOCKDOWN_WAY_D_BASE 0x900 +#define L2X0_LOCKDOWN_WAY_I_BASE 0x904 +#define L2X0_LOCKDOWN_STRIDE 0x08 +#define L2X0_ADDR_FILTER_START 0xC00 +#define L2X0_ADDR_FILTER_END 0xC04 #define L2X0_TEST_OPERATION 0xF00 #define L2X0_LINE_DATA 0xF10 #define L2X0_LINE_TAG 0xF30 @@ -60,11 +67,26 @@ #define L2X0_CACHE_ID_PART_MASK (0xf << 6) #define L2X0_CACHE_ID_PART_L210 (1 << 6) #define L2X0_CACHE_ID_PART_L310 (3 << 6) +#define L2X0_CACHE_ID_RTL_MASK 0x3f +#define L2X0_CACHE_ID_RTL_R0P0 0x0 +#define L2X0_CACHE_ID_RTL_R1P0 0x2 +#define L2X0_CACHE_ID_RTL_R2P0 0x4 +#define L2X0_CACHE_ID_RTL_R3P0 0x5 +#define L2X0_CACHE_ID_RTL_R3P1 0x6 +#define L2X0_CACHE_ID_RTL_R3P2 0x8 #define L2X0_AUX_CTRL_MASK 0xc0000fff +#define L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT 0 +#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK 0x7 +#define L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT 3 +#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK (0x7 << 3) +#define L2X0_AUX_CTRL_TAG_LATENCY_SHIFT 6 +#define L2X0_AUX_CTRL_TAG_LATENCY_MASK (0x7 << 6) +#define L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT 9 +#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK (0x7 << 9) #define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT 16 #define L2X0_AUX_CTRL_WAY_SIZE_SHIFT 17 -#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x3 << 17) +#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x7 << 17) #define L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT 22 #define L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT 26 #define L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT 27 @@ -72,8 +94,33 @@ #define L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT 29 #define L2X0_AUX_CTRL_EARLY_BRESP_SHIFT 30 +#define L2X0_LATENCY_CTRL_SETUP_SHIFT 0 +#define L2X0_LATENCY_CTRL_RD_SHIFT 4 +#define L2X0_LATENCY_CTRL_WR_SHIFT 8 + +#define L2X0_ADDR_FILTER_EN 1 + #ifndef __ASSEMBLY__ extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask); +extern int l2x0_of_init(__u32 aux_val, __u32 aux_mask); + +struct l2x0_regs { + unsigned long phy_base; + unsigned long aux_ctrl; + /* + * Whether the following registers need to be saved/restored + * depends on platform + */ + unsigned long tag_latency; + unsigned long data_latency; + unsigned long filter_start; + unsigned long filter_end; + unsigned long prefetch_ctrl; + unsigned long pwr_ctrl; +}; + +extern struct l2x0_regs l2x0_saved_regs; + #endif #endif diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index ffb089d46a17..dc2d5102e680 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -281,10 +281,16 @@ extern void _memset_io(volatile void __iomem *, int, size_t); #define ioread16(p) ({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __iormb(); __v; }) #define ioread32(p) ({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __iormb(); __v; }) +#define ioread16be(p) ({ unsigned int __v = be16_to_cpu((__force __be16)__raw_readw(p)); __iormb(); __v; }) +#define ioread32be(p) ({ unsigned int __v = be32_to_cpu((__force __be32)__raw_readl(p)); __iormb(); __v; }) + #define iowrite8(v,p) ({ __iowmb(); (void)__raw_writeb(v, p); }) #define iowrite16(v,p) ({ __iowmb(); (void)__raw_writew((__force __u16)cpu_to_le16(v), p); }) #define iowrite32(v,p) ({ __iowmb(); (void)__raw_writel((__force __u32)cpu_to_le32(v), p); }) +#define iowrite16be(v,p) ({ __iowmb(); (void)__raw_writew((__force __u16)cpu_to_be16(v), p); }) +#define iowrite32be(v,p) ({ __iowmb(); (void)__raw_writel((__force __u32)cpu_to_be32(v), p); }) + #define ioread8_rep(p,d,c) __raw_readsb(p,d,c) #define ioread16_rep(p,d,c) __raw_readsw(p,d,c) #define ioread32_rep(p,d,c) __raw_readsl(p,d,c) diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h index 080d74f8128d..6fd955d34c65 100644 --- a/arch/arm/include/asm/localtimer.h +++ b/arch/arm/include/asm/localtimer.h @@ -10,6 +10,8 @@ #ifndef __ASM_ARM_LOCALTIMER_H #define __ASM_ARM_LOCALTIMER_H +#include <linux/errno.h> + struct clock_event_device; /* @@ -22,6 +24,10 @@ void percpu_timer_setup(void); */ asmlinkage void do_local_timer(struct pt_regs *); +/* + * Called from C code + */ +void handle_local_timer(struct pt_regs *); #ifdef CONFIG_LOCAL_TIMERS diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index b8de516e600e..441fc4fe8263 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -160,7 +160,6 @@ * so that all we need to do is modify the 8-bit constant field. */ #define __PV_BITS_31_24 0x81000000 -#define __PV_BITS_23_16 0x00810000 extern unsigned long __pv_phys_offset; #define PHYS_OFFSET __pv_phys_offset @@ -178,9 +177,6 @@ static inline unsigned long __virt_to_phys(unsigned long x) { unsigned long t; __pv_stub(x, t, "add", __PV_BITS_31_24); -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT - __pv_stub(t, t, "add", __PV_BITS_23_16); -#endif return t; } @@ -188,9 +184,6 @@ static inline unsigned long __phys_to_virt(unsigned long x) { unsigned long t; __pv_stub(x, t, "sub", __PV_BITS_31_24); -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT - __pv_stub(t, t, "sub", __PV_BITS_23_16); -#endif return t; } #else diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h index 543b44916d2c..6c6809f982f1 100644 --- a/arch/arm/include/asm/module.h +++ b/arch/arm/include/asm/module.h @@ -31,11 +31,7 @@ struct mod_arch_specific { /* Add __virt_to_phys patching state as well */ #ifdef CONFIG_ARM_PATCH_PHYS_VIRT -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT -#define MODULE_ARCH_VERMAGIC_P2V "p2v16 " -#else #define MODULE_ARCH_VERMAGIC_P2V "p2v8 " -#endif #else #define MODULE_ARCH_VERMAGIC_P2V "" #endif diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h index d8387437ec5a..53426c66352a 100644 --- a/arch/arm/include/asm/outercache.h +++ b/arch/arm/include/asm/outercache.h @@ -34,6 +34,7 @@ struct outer_cache_fns { void (*sync)(void); #endif void (*set_debug)(unsigned long); + void (*resume)(void); }; #ifdef CONFIG_OUTER_CACHE @@ -74,6 +75,12 @@ static inline void outer_disable(void) outer_cache.disable(); } +static inline void outer_resume(void) +{ + if (outer_cache.resume) + outer_cache.resume(); +} + #else static inline void outer_inv_range(phys_addr_t start, phys_addr_t end) diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index ac75d0848889..ca94653f1ecb 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -151,47 +151,7 @@ extern void __cpu_copy_user_highpage(struct page *to, struct page *from, #define clear_page(page) memset((void *)(page), 0, PAGE_SIZE) extern void copy_page(void *to, const void *from); -typedef unsigned long pteval_t; - -#undef STRICT_MM_TYPECHECKS - -#ifdef STRICT_MM_TYPECHECKS -/* - * These are used to make use of C type-checking.. - */ -typedef struct { pteval_t pte; } pte_t; -typedef struct { unsigned long pmd; } pmd_t; -typedef struct { unsigned long pgd[2]; } pgd_t; -typedef struct { unsigned long pgprot; } pgprot_t; - -#define pte_val(x) ((x).pte) -#define pmd_val(x) ((x).pmd) -#define pgd_val(x) ((x).pgd[0]) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -#else -/* - * .. while these make it easier on the compiler - */ -typedef pteval_t pte_t; -typedef unsigned long pmd_t; -typedef unsigned long pgd_t[2]; -typedef unsigned long pgprot_t; - -#define pte_val(x) (x) -#define pmd_val(x) (x) -#define pgd_val(x) ((x)[0]) -#define pgprot_val(x) (x) - -#define __pte(x) (x) -#define __pmd(x) (x) -#define __pgprot(x) (x) - -#endif /* STRICT_MM_TYPECHECKS */ +#include <asm/pgtable-2level-types.h> #endif /* CONFIG_MMU */ diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h index 22de005f159c..3e08fd3fbb6b 100644 --- a/arch/arm/include/asm/pgalloc.h +++ b/arch/arm/include/asm/pgalloc.h @@ -105,9 +105,9 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte) } static inline void __pmd_populate(pmd_t *pmdp, phys_addr_t pte, - unsigned long prot) + pmdval_t prot) { - unsigned long pmdval = (pte + PTE_HWTABLE_OFF) | prot; + pmdval_t pmdval = (pte + PTE_HWTABLE_OFF) | prot; pmdp[0] = __pmd(pmdval); pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t)); flush_pmd_entry(pmdp); diff --git a/arch/arm/include/asm/pgtable-2level-hwdef.h b/arch/arm/include/asm/pgtable-2level-hwdef.h new file mode 100644 index 000000000000..5cfba15cb401 --- /dev/null +++ b/arch/arm/include/asm/pgtable-2level-hwdef.h @@ -0,0 +1,93 @@ +/* + * arch/arm/include/asm/pgtable-2level-hwdef.h + * + * Copyright (C) 1995-2002 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_PGTABLE_2LEVEL_HWDEF_H +#define _ASM_PGTABLE_2LEVEL_HWDEF_H + +/* + * Hardware page table definitions. + * + * + Level 1 descriptor (PMD) + * - common + */ +#define PMD_TYPE_MASK (_AT(pmdval_t, 3) << 0) +#define PMD_TYPE_FAULT (_AT(pmdval_t, 0) << 0) +#define PMD_TYPE_TABLE (_AT(pmdval_t, 1) << 0) +#define PMD_TYPE_SECT (_AT(pmdval_t, 2) << 0) +#define PMD_BIT4 (_AT(pmdval_t, 1) << 4) +#define PMD_DOMAIN(x) (_AT(pmdval_t, (x)) << 5) +#define PMD_PROTECTION (_AT(pmdval_t, 1) << 9) /* v5 */ +/* + * - section + */ +#define PMD_SECT_BUFFERABLE (_AT(pmdval_t, 1) << 2) +#define PMD_SECT_CACHEABLE (_AT(pmdval_t, 1) << 3) +#define PMD_SECT_XN (_AT(pmdval_t, 1) << 4) /* v6 */ +#define PMD_SECT_AP_WRITE (_AT(pmdval_t, 1) << 10) +#define PMD_SECT_AP_READ (_AT(pmdval_t, 1) << 11) +#define PMD_SECT_TEX(x) (_AT(pmdval_t, (x)) << 12) /* v5 */ +#define PMD_SECT_APX (_AT(pmdval_t, 1) << 15) /* v6 */ +#define PMD_SECT_S (_AT(pmdval_t, 1) << 16) /* v6 */ +#define PMD_SECT_nG (_AT(pmdval_t, 1) << 17) /* v6 */ +#define PMD_SECT_SUPER (_AT(pmdval_t, 1) << 18) /* v6 */ +#define PMD_SECT_AF (_AT(pmdval_t, 0)) + +#define PMD_SECT_UNCACHED (_AT(pmdval_t, 0)) +#define PMD_SECT_BUFFERED (PMD_SECT_BUFFERABLE) +#define PMD_SECT_WT (PMD_SECT_CACHEABLE) +#define PMD_SECT_WB (PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) +#define PMD_SECT_MINICACHE (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE) +#define PMD_SECT_WBWA (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) +#define PMD_SECT_NONSHARED_DEV (PMD_SECT_TEX(2)) + +/* + * - coarse table (not used) + */ + +/* + * + Level 2 descriptor (PTE) + * - common + */ +#define PTE_TYPE_MASK (_AT(pteval_t, 3) << 0) +#define PTE_TYPE_FAULT (_AT(pteval_t, 0) << 0) +#define PTE_TYPE_LARGE (_AT(pteval_t, 1) << 0) +#define PTE_TYPE_SMALL (_AT(pteval_t, 2) << 0) +#define PTE_TYPE_EXT (_AT(pteval_t, 3) << 0) /* v5 */ +#define PTE_BUFFERABLE (_AT(pteval_t, 1) << 2) +#define PTE_CACHEABLE (_AT(pteval_t, 1) << 3) + +/* + * - extended small page/tiny page + */ +#define PTE_EXT_XN (_AT(pteval_t, 1) << 0) /* v6 */ +#define PTE_EXT_AP_MASK (_AT(pteval_t, 3) << 4) +#define PTE_EXT_AP0 (_AT(pteval_t, 1) << 4) +#define PTE_EXT_AP1 (_AT(pteval_t, 2) << 4) +#define PTE_EXT_AP_UNO_SRO (_AT(pteval_t, 0) << 4) +#define PTE_EXT_AP_UNO_SRW (PTE_EXT_AP0) +#define PTE_EXT_AP_URO_SRW (PTE_EXT_AP1) +#define PTE_EXT_AP_URW_SRW (PTE_EXT_AP1|PTE_EXT_AP0) +#define PTE_EXT_TEX(x) (_AT(pteval_t, (x)) << 6) /* v5 */ +#define PTE_EXT_APX (_AT(pteval_t, 1) << 9) /* v6 */ +#define PTE_EXT_COHERENT (_AT(pteval_t, 1) << 9) /* XScale3 */ +#define PTE_EXT_SHARED (_AT(pteval_t, 1) << 10) /* v6 */ +#define PTE_EXT_NG (_AT(pteval_t, 1) << 11) /* v6 */ + +/* + * - small page + */ +#define PTE_SMALL_AP_MASK (_AT(pteval_t, 0xff) << 4) +#define PTE_SMALL_AP_UNO_SRO (_AT(pteval_t, 0x00) << 4) +#define PTE_SMALL_AP_UNO_SRW (_AT(pteval_t, 0x55) << 4) +#define PTE_SMALL_AP_URO_SRW (_AT(pteval_t, 0xaa) << 4) +#define PTE_SMALL_AP_URW_SRW (_AT(pteval_t, 0xff) << 4) + +#define PHYS_MASK (~0UL) + +#endif diff --git a/arch/arm/include/asm/pgtable-2level-types.h b/arch/arm/include/asm/pgtable-2level-types.h new file mode 100644 index 000000000000..66cb5b0e89c5 --- /dev/null +++ b/arch/arm/include/asm/pgtable-2level-types.h @@ -0,0 +1,67 @@ +/* + * arch/arm/include/asm/pgtable-2level-types.h + * + * Copyright (C) 1995-2003 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ASM_PGTABLE_2LEVEL_TYPES_H +#define _ASM_PGTABLE_2LEVEL_TYPES_H + +#include <asm/types.h> + +typedef u32 pteval_t; +typedef u32 pmdval_t; + +#undef STRICT_MM_TYPECHECKS + +#ifdef STRICT_MM_TYPECHECKS +/* + * These are used to make use of C type-checking.. + */ +typedef struct { pteval_t pte; } pte_t; +typedef struct { pmdval_t pmd; } pmd_t; +typedef struct { pmdval_t pgd[2]; } pgd_t; +typedef struct { pteval_t pgprot; } pgprot_t; + +#define pte_val(x) ((x).pte) +#define pmd_val(x) ((x).pmd) +#define pgd_val(x) ((x).pgd[0]) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +#else +/* + * .. while these make it easier on the compiler + */ +typedef pteval_t pte_t; +typedef pmdval_t pmd_t; +typedef pmdval_t pgd_t[2]; +typedef pteval_t pgprot_t; + +#define pte_val(x) (x) +#define pmd_val(x) (x) +#define pgd_val(x) ((x)[0]) +#define pgprot_val(x) (x) + +#define __pte(x) (x) +#define __pmd(x) (x) +#define __pgprot(x) (x) + +#endif /* STRICT_MM_TYPECHECKS */ + +#endif /* _ASM_PGTABLE_2LEVEL_TYPES_H */ diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h new file mode 100644 index 000000000000..470457e1cfc5 --- /dev/null +++ b/arch/arm/include/asm/pgtable-2level.h @@ -0,0 +1,143 @@ +/* + * arch/arm/include/asm/pgtable-2level.h + * + * Copyright (C) 1995-2002 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_PGTABLE_2LEVEL_H +#define _ASM_PGTABLE_2LEVEL_H + +/* + * Hardware-wise, we have a two level page table structure, where the first + * level has 4096 entries, and the second level has 256 entries. Each entry + * is one 32-bit word. Most of the bits in the second level entry are used + * by hardware, and there aren't any "accessed" and "dirty" bits. + * + * Linux on the other hand has a three level page table structure, which can + * be wrapped to fit a two level page table structure easily - using the PGD + * and PTE only. However, Linux also expects one "PTE" table per page, and + * at least a "dirty" bit. + * + * Therefore, we tweak the implementation slightly - we tell Linux that we + * have 2048 entries in the first level, each of which is 8 bytes (iow, two + * hardware pointers to the second level.) The second level contains two + * hardware PTE tables arranged contiguously, preceded by Linux versions + * which contain the state information Linux needs. We, therefore, end up + * with 512 entries in the "PTE" level. + * + * This leads to the page tables having the following layout: + * + * pgd pte + * | | + * +--------+ + * | | +------------+ +0 + * +- - - - + | Linux pt 0 | + * | | +------------+ +1024 + * +--------+ +0 | Linux pt 1 | + * | |-----> +------------+ +2048 + * +- - - - + +4 | h/w pt 0 | + * | |-----> +------------+ +3072 + * +--------+ +8 | h/w pt 1 | + * | | +------------+ +4096 + * + * See L_PTE_xxx below for definitions of bits in the "Linux pt", and + * PTE_xxx for definitions of bits appearing in the "h/w pt". + * + * PMD_xxx definitions refer to bits in the first level page table. + * + * The "dirty" bit is emulated by only granting hardware write permission + * iff the page is marked "writable" and "dirty" in the Linux PTE. This + * means that a write to a clean page will cause a permission fault, and + * the Linux MM layer will mark the page dirty via handle_pte_fault(). + * For the hardware to notice the permission change, the TLB entry must + * be flushed, and ptep_set_access_flags() does that for us. + * + * The "accessed" or "young" bit is emulated by a similar method; we only + * allow accesses to the page if the "young" bit is set. Accesses to the + * page will cause a fault, and handle_pte_fault() will set the young bit + * for us as long as the page is marked present in the corresponding Linux + * PTE entry. Again, ptep_set_access_flags() will ensure that the TLB is + * up to date. + * + * However, when the "young" bit is cleared, we deny access to the page + * by clearing the hardware PTE. Currently Linux does not flush the TLB + * for us in this case, which means the TLB will retain the transation + * until either the TLB entry is evicted under pressure, or a context + * switch which changes the user space mapping occurs. + */ +#define PTRS_PER_PTE 512 +#define PTRS_PER_PMD 1 +#define PTRS_PER_PGD 2048 + +#define PTE_HWTABLE_PTRS (PTRS_PER_PTE) +#define PTE_HWTABLE_OFF (PTE_HWTABLE_PTRS * sizeof(pte_t)) +#define PTE_HWTABLE_SIZE (PTRS_PER_PTE * sizeof(u32)) + +/* + * PMD_SHIFT determines the size of the area a second-level page table can map + * PGDIR_SHIFT determines what a third-level page table entry can map + */ +#define PMD_SHIFT 21 +#define PGDIR_SHIFT 21 + +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* + * section address mask and size definitions. + */ +#define SECTION_SHIFT 20 +#define SECTION_SIZE (1UL << SECTION_SHIFT) +#define SECTION_MASK (~(SECTION_SIZE-1)) + +/* + * ARMv6 supersection address mask and size definitions. + */ +#define SUPERSECTION_SHIFT 24 +#define SUPERSECTION_SIZE (1UL << SUPERSECTION_SHIFT) +#define SUPERSECTION_MASK (~(SUPERSECTION_SIZE-1)) + +#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) + +/* + * "Linux" PTE definitions. + * + * We keep two sets of PTEs - the hardware and the linux version. + * This allows greater flexibility in the way we map the Linux bits + * onto the hardware tables, and allows us to have YOUNG and DIRTY + * bits. + * + * The PTE table pointer refers to the hardware entries; the "Linux" + * entries are stored 1024 bytes below. + */ +#define L_PTE_PRESENT (_AT(pteval_t, 1) << 0) +#define L_PTE_YOUNG (_AT(pteval_t, 1) << 1) +#define L_PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !PRESENT */ +#define L_PTE_DIRTY (_AT(pteval_t, 1) << 6) +#define L_PTE_RDONLY (_AT(pteval_t, 1) << 7) +#define L_PTE_USER (_AT(pteval_t, 1) << 8) +#define L_PTE_XN (_AT(pteval_t, 1) << 9) +#define L_PTE_SHARED (_AT(pteval_t, 1) << 10) /* shared(v6), coherent(xsc3) */ + +/* + * These are the memory types, defined to be compatible with + * pre-ARMv6 CPUs cacheable and bufferable bits: XXCB + */ +#define L_PTE_MT_UNCACHED (_AT(pteval_t, 0x00) << 2) /* 0000 */ +#define L_PTE_MT_BUFFERABLE (_AT(pteval_t, 0x01) << 2) /* 0001 */ +#define L_PTE_MT_WRITETHROUGH (_AT(pteval_t, 0x02) << 2) /* 0010 */ +#define L_PTE_MT_WRITEBACK (_AT(pteval_t, 0x03) << 2) /* 0011 */ +#define L_PTE_MT_MINICACHE (_AT(pteval_t, 0x06) << 2) /* 0110 (sa1100, xscale) */ +#define L_PTE_MT_WRITEALLOC (_AT(pteval_t, 0x07) << 2) /* 0111 */ +#define L_PTE_MT_DEV_SHARED (_AT(pteval_t, 0x04) << 2) /* 0100 */ +#define L_PTE_MT_DEV_NONSHARED (_AT(pteval_t, 0x0c) << 2) /* 1100 */ +#define L_PTE_MT_DEV_WC (_AT(pteval_t, 0x09) << 2) /* 1001 */ +#define L_PTE_MT_DEV_CACHED (_AT(pteval_t, 0x0b) << 2) /* 1011 */ +#define L_PTE_MT_MASK (_AT(pteval_t, 0x0f) << 2) + +#endif /* _ASM_PGTABLE_2LEVEL_H */ diff --git a/arch/arm/include/asm/pgtable-hwdef.h b/arch/arm/include/asm/pgtable-hwdef.h index fd1521d5cb9d..183111164ce9 100644 --- a/arch/arm/include/asm/pgtable-hwdef.h +++ b/arch/arm/include/asm/pgtable-hwdef.h @@ -10,81 +10,6 @@ #ifndef _ASMARM_PGTABLE_HWDEF_H #define _ASMARM_PGTABLE_HWDEF_H -/* - * Hardware page table definitions. - * - * + Level 1 descriptor (PMD) - * - common - */ -#define PMD_TYPE_MASK (3 << 0) -#define PMD_TYPE_FAULT (0 << 0) -#define PMD_TYPE_TABLE (1 << 0) -#define PMD_TYPE_SECT (2 << 0) -#define PMD_BIT4 (1 << 4) -#define PMD_DOMAIN(x) ((x) << 5) -#define PMD_PROTECTION (1 << 9) /* v5 */ -/* - * - section - */ -#define PMD_SECT_BUFFERABLE (1 << 2) -#define PMD_SECT_CACHEABLE (1 << 3) -#define PMD_SECT_XN (1 << 4) /* v6 */ -#define PMD_SECT_AP_WRITE (1 << 10) -#define PMD_SECT_AP_READ (1 << 11) -#define PMD_SECT_TEX(x) ((x) << 12) /* v5 */ -#define PMD_SECT_APX (1 << 15) /* v6 */ -#define PMD_SECT_S (1 << 16) /* v6 */ -#define PMD_SECT_nG (1 << 17) /* v6 */ -#define PMD_SECT_SUPER (1 << 18) /* v6 */ - -#define PMD_SECT_UNCACHED (0) -#define PMD_SECT_BUFFERED (PMD_SECT_BUFFERABLE) -#define PMD_SECT_WT (PMD_SECT_CACHEABLE) -#define PMD_SECT_WB (PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) -#define PMD_SECT_MINICACHE (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE) -#define PMD_SECT_WBWA (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) -#define PMD_SECT_NONSHARED_DEV (PMD_SECT_TEX(2)) - -/* - * - coarse table (not used) - */ - -/* - * + Level 2 descriptor (PTE) - * - common - */ -#define PTE_TYPE_MASK (3 << 0) -#define PTE_TYPE_FAULT (0 << 0) -#define PTE_TYPE_LARGE (1 << 0) -#define PTE_TYPE_SMALL (2 << 0) -#define PTE_TYPE_EXT (3 << 0) /* v5 */ -#define PTE_BUFFERABLE (1 << 2) -#define PTE_CACHEABLE (1 << 3) - -/* - * - extended small page/tiny page - */ -#define PTE_EXT_XN (1 << 0) /* v6 */ -#define PTE_EXT_AP_MASK (3 << 4) -#define PTE_EXT_AP0 (1 << 4) -#define PTE_EXT_AP1 (2 << 4) -#define PTE_EXT_AP_UNO_SRO (0 << 4) -#define PTE_EXT_AP_UNO_SRW (PTE_EXT_AP0) -#define PTE_EXT_AP_URO_SRW (PTE_EXT_AP1) -#define PTE_EXT_AP_URW_SRW (PTE_EXT_AP1|PTE_EXT_AP0) -#define PTE_EXT_TEX(x) ((x) << 6) /* v5 */ -#define PTE_EXT_APX (1 << 9) /* v6 */ -#define PTE_EXT_COHERENT (1 << 9) /* XScale3 */ -#define PTE_EXT_SHARED (1 << 10) /* v6 */ -#define PTE_EXT_NG (1 << 11) /* v6 */ - -/* - * - small page - */ -#define PTE_SMALL_AP_MASK (0xff << 4) -#define PTE_SMALL_AP_UNO_SRO (0x00 << 4) -#define PTE_SMALL_AP_UNO_SRW (0x55 << 4) -#define PTE_SMALL_AP_URO_SRW (0xaa << 4) -#define PTE_SMALL_AP_URW_SRW (0xff << 4) +#include <asm/pgtable-2level-hwdef.h> #endif diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 5750704e0271..8ade1840c6f2 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -24,6 +24,8 @@ #include <mach/vmalloc.h> #include <asm/pgtable-hwdef.h> +#include <asm/pgtable-2level.h> + /* * Just any arbitrary offset to the start of the vmalloc VM area: the * current 8MB value just means that there will be a 8MB "hole" after the @@ -41,79 +43,6 @@ #define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) #endif -/* - * Hardware-wise, we have a two level page table structure, where the first - * level has 4096 entries, and the second level has 256 entries. Each entry - * is one 32-bit word. Most of the bits in the second level entry are used - * by hardware, and there aren't any "accessed" and "dirty" bits. - * - * Linux on the other hand has a three level page table structure, which can - * be wrapped to fit a two level page table structure easily - using the PGD - * and PTE only. However, Linux also expects one "PTE" table per page, and - * at least a "dirty" bit. - * - * Therefore, we tweak the implementation slightly - we tell Linux that we - * have 2048 entries in the first level, each of which is 8 bytes (iow, two - * hardware pointers to the second level.) The second level contains two - * hardware PTE tables arranged contiguously, preceded by Linux versions - * which contain the state information Linux needs. We, therefore, end up - * with 512 entries in the "PTE" level. - * - * This leads to the page tables having the following layout: - * - * pgd pte - * | | - * +--------+ - * | | +------------+ +0 - * +- - - - + | Linux pt 0 | - * | | +------------+ +1024 - * +--------+ +0 | Linux pt 1 | - * | |-----> +------------+ +2048 - * +- - - - + +4 | h/w pt 0 | - * | |-----> +------------+ +3072 - * +--------+ +8 | h/w pt 1 | - * | | +------------+ +4096 - * - * See L_PTE_xxx below for definitions of bits in the "Linux pt", and - * PTE_xxx for definitions of bits appearing in the "h/w pt". - * - * PMD_xxx definitions refer to bits in the first level page table. - * - * The "dirty" bit is emulated by only granting hardware write permission - * iff the page is marked "writable" and "dirty" in the Linux PTE. This - * means that a write to a clean page will cause a permission fault, and - * the Linux MM layer will mark the page dirty via handle_pte_fault(). - * For the hardware to notice the permission change, the TLB entry must - * be flushed, and ptep_set_access_flags() does that for us. - * - * The "accessed" or "young" bit is emulated by a similar method; we only - * allow accesses to the page if the "young" bit is set. Accesses to the - * page will cause a fault, and handle_pte_fault() will set the young bit - * for us as long as the page is marked present in the corresponding Linux - * PTE entry. Again, ptep_set_access_flags() will ensure that the TLB is - * up to date. - * - * However, when the "young" bit is cleared, we deny access to the page - * by clearing the hardware PTE. Currently Linux does not flush the TLB - * for us in this case, which means the TLB will retain the transation - * until either the TLB entry is evicted under pressure, or a context - * switch which changes the user space mapping occurs. - */ -#define PTRS_PER_PTE 512 -#define PTRS_PER_PMD 1 -#define PTRS_PER_PGD 2048 - -#define PTE_HWTABLE_PTRS (PTRS_PER_PTE) -#define PTE_HWTABLE_OFF (PTE_HWTABLE_PTRS * sizeof(pte_t)) -#define PTE_HWTABLE_SIZE (PTRS_PER_PTE * sizeof(u32)) - -/* - * PMD_SHIFT determines the size of the area a second-level page table can map - * PGDIR_SHIFT determines what a third-level page table entry can map - */ -#define PMD_SHIFT 21 -#define PGDIR_SHIFT 21 - #define LIBRARY_TEXT_START 0x0c000000 #ifndef __ASSEMBLY__ @@ -124,12 +53,6 @@ extern void __pgd_error(const char *file, int line, pgd_t); #define pte_ERROR(pte) __pte_error(__FILE__, __LINE__, pte) #define pmd_ERROR(pmd) __pmd_error(__FILE__, __LINE__, pmd) #define pgd_ERROR(pgd) __pgd_error(__FILE__, __LINE__, pgd) -#endif /* !__ASSEMBLY__ */ - -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE-1)) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) /* * This is the lowest virtual address we can permit any user space @@ -138,60 +61,6 @@ extern void __pgd_error(const char *file, int line, pgd_t); */ #define FIRST_USER_ADDRESS PAGE_SIZE -#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) - -/* - * section address mask and size definitions. - */ -#define SECTION_SHIFT 20 -#define SECTION_SIZE (1UL << SECTION_SHIFT) -#define SECTION_MASK (~(SECTION_SIZE-1)) - -/* - * ARMv6 supersection address mask and size definitions. - */ -#define SUPERSECTION_SHIFT 24 -#define SUPERSECTION_SIZE (1UL << SUPERSECTION_SHIFT) -#define SUPERSECTION_MASK (~(SUPERSECTION_SIZE-1)) - -/* - * "Linux" PTE definitions. - * - * We keep two sets of PTEs - the hardware and the linux version. - * This allows greater flexibility in the way we map the Linux bits - * onto the hardware tables, and allows us to have YOUNG and DIRTY - * bits. - * - * The PTE table pointer refers to the hardware entries; the "Linux" - * entries are stored 1024 bytes below. - */ -#define L_PTE_PRESENT (_AT(pteval_t, 1) << 0) -#define L_PTE_YOUNG (_AT(pteval_t, 1) << 1) -#define L_PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !PRESENT */ -#define L_PTE_DIRTY (_AT(pteval_t, 1) << 6) -#define L_PTE_RDONLY (_AT(pteval_t, 1) << 7) -#define L_PTE_USER (_AT(pteval_t, 1) << 8) -#define L_PTE_XN (_AT(pteval_t, 1) << 9) -#define L_PTE_SHARED (_AT(pteval_t, 1) << 10) /* shared(v6), coherent(xsc3) */ - -/* - * These are the memory types, defined to be compatible with - * pre-ARMv6 CPUs cacheable and bufferable bits: XXCB - */ -#define L_PTE_MT_UNCACHED (_AT(pteval_t, 0x00) << 2) /* 0000 */ -#define L_PTE_MT_BUFFERABLE (_AT(pteval_t, 0x01) << 2) /* 0001 */ -#define L_PTE_MT_WRITETHROUGH (_AT(pteval_t, 0x02) << 2) /* 0010 */ -#define L_PTE_MT_WRITEBACK (_AT(pteval_t, 0x03) << 2) /* 0011 */ -#define L_PTE_MT_MINICACHE (_AT(pteval_t, 0x06) << 2) /* 0110 (sa1100, xscale) */ -#define L_PTE_MT_WRITEALLOC (_AT(pteval_t, 0x07) << 2) /* 0111 */ -#define L_PTE_MT_DEV_SHARED (_AT(pteval_t, 0x04) << 2) /* 0100 */ -#define L_PTE_MT_DEV_NONSHARED (_AT(pteval_t, 0x0c) << 2) /* 1100 */ -#define L_PTE_MT_DEV_WC (_AT(pteval_t, 0x09) << 2) /* 1001 */ -#define L_PTE_MT_DEV_CACHED (_AT(pteval_t, 0x0b) << 2) /* 1011 */ -#define L_PTE_MT_MASK (_AT(pteval_t, 0x0f) << 2) - -#ifndef __ASSEMBLY__ - /* * The pgprot_* and protection_map entries will be fixed up in runtime * to include the cachable and bufferable bits based on memory policy, @@ -327,10 +196,10 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; static inline pte_t *pmd_page_vaddr(pmd_t pmd) { - return __va(pmd_val(pmd) & PAGE_MASK); + return __va(pmd_val(pmd) & PHYS_MASK & (s32)PAGE_MASK); } -#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd))) +#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK)) /* we don't need complex calculations here as the pmd is folded into the pgd */ #define pmd_addr_end(addr,end) (end) @@ -351,7 +220,7 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pte_offset_map(pmd,addr) (__pte_map(pmd) + pte_index(addr)) #define pte_unmap(pte) __pte_unmap(pte) -#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) +#define pte_pfn(pte) ((pte_val(pte) & PHYS_MASK) >> PAGE_SHIFT) #define pfn_pte(pfn,prot) __pte(__pfn_to_phys(pfn) | pgprot_val(prot)) #define pte_page(pte) pfn_to_page(pte_pfn(pte)) diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index 67c70a31a1be..b7e82c4aced6 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -41,7 +41,7 @@ struct arm_pmu_platdata { * encoded error on failure. */ extern struct platform_device * -reserve_pmu(enum arm_pmu_type device); +reserve_pmu(enum arm_pmu_type type); /** * release_pmu() - Relinquish control of the performance counters @@ -62,26 +62,26 @@ release_pmu(enum arm_pmu_type type); * the actual hardware initialisation. */ extern int -init_pmu(enum arm_pmu_type device); +init_pmu(enum arm_pmu_type type); #else /* CONFIG_CPU_HAS_PMU */ #include <linux/err.h> static inline struct platform_device * -reserve_pmu(enum arm_pmu_type device) +reserve_pmu(enum arm_pmu_type type) { return ERR_PTR(-ENODEV); } static inline int -release_pmu(struct platform_device *pdev) +release_pmu(enum arm_pmu_type type) { return -ENODEV; } static inline int -init_pmu(enum arm_pmu_type device) +init_pmu(enum arm_pmu_type type) { return -ENODEV; } diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index e42d96a45d3e..0a17b62538c2 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -33,6 +33,11 @@ extern void show_ipi_list(struct seq_file *, int); asmlinkage void do_IPI(int ipinr, struct pt_regs *regs); /* + * Called from C code, this handles an IPI. + */ +void handle_IPI(int ipinr, struct pt_regs *regs); + +/* * Setup the set of possible CPUs (via set_cpu_possible) */ extern void smp_init_cpus(void); @@ -66,6 +71,12 @@ extern void platform_secondary_init(unsigned int cpu); extern void platform_smp_prepare_cpus(unsigned int); /* + * Logical CPU mapping. + */ +extern int __cpu_logical_map[NR_CPUS]; +#define cpu_logical_map(cpu) __cpu_logical_map[cpu] + +/* * Initial data for bringing up a secondary CPU. */ struct secondary_data { diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 832888d0c20c..ed6b0499a106 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -62,13 +62,6 @@ #include <asm/outercache.h> -#define __exception __attribute__((section(".exception.text"))) -#ifdef CONFIG_FUNCTION_GRAPH_TRACER -#define __exception_irq_entry __irq_entry -#else -#define __exception_irq_entry __exception -#endif - struct thread_info; struct task_struct; diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index 8077145698ff..02b2f8203982 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -471,7 +471,7 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr) * these operations. This is typically used when we are removing * PMD entries. */ -static inline void flush_pmd_entry(pmd_t *pmd) +static inline void flush_pmd_entry(void *pmd) { const unsigned int __tlb_flag = __cpu_tlb_flags; @@ -487,7 +487,7 @@ static inline void flush_pmd_entry(pmd_t *pmd) dsb(); } -static inline void clean_pmd_entry(pmd_t *pmd) +static inline void clean_pmd_entry(void *pmd) { const unsigned int __tlb_flag = __cpu_tlb_flags; diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h index accbd7cad9b5..a7e457ed27c3 100644 --- a/arch/arm/include/asm/topology.h +++ b/arch/arm/include/asm/topology.h @@ -1,6 +1,39 @@ #ifndef _ASM_ARM_TOPOLOGY_H #define _ASM_ARM_TOPOLOGY_H +#ifdef CONFIG_ARM_CPU_TOPOLOGY + +#include <linux/cpumask.h> + +struct cputopo_arm { + int thread_id; + int core_id; + int socket_id; + cpumask_t thread_sibling; + cpumask_t core_sibling; +}; + +extern struct cputopo_arm cpu_topology[NR_CPUS]; + +#define topology_physical_package_id(cpu) (cpu_topology[cpu].socket_id) +#define topology_core_id(cpu) (cpu_topology[cpu].core_id) +#define topology_core_cpumask(cpu) (&cpu_topology[cpu].core_sibling) +#define topology_thread_cpumask(cpu) (&cpu_topology[cpu].thread_sibling) + +#define mc_capable() (cpu_topology[0].socket_id != -1) +#define smt_capable() (cpu_topology[0].thread_id != -1) + +void init_cpu_topology(void); +void store_cpu_topology(unsigned int cpuid); +const struct cpumask *cpu_coregroup_mask(unsigned int cpu); + +#else + +static inline void init_cpu_topology(void) { } +static inline void store_cpu_topology(unsigned int cpuid) { } + +#endif + #include <asm-generic/topology.h> #endif /* _ASM_ARM_TOPOLOGY_H */ diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 2c04ed5efeb5..c60a2944f95b 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -478,8 +478,8 @@ /* * Unimplemented (or alternatively implemented) syscalls */ -#define __IGNORE_fadvise64_64 1 -#define __IGNORE_migrate_pages 1 +#define __IGNORE_fadvise64_64 +#define __IGNORE_migrate_pages #endif /* __KERNEL__ */ #endif /* __ASM_ARM_UNISTD_H */ diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index f7887dc53c1f..68036eece340 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -29,7 +29,7 @@ obj-$(CONFIG_MODULES) += armksyms.o module.o obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o -obj-$(CONFIG_PM_SLEEP) += sleep.o +obj-$(CONFIG_ARM_CPU_SUSPEND) += sleep.o obj-$(CONFIG_HAVE_SCHED_CLOCK) += sched_clock.o obj-$(CONFIG_SMP) += smp.o smp_tlb.o obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o @@ -66,6 +66,7 @@ obj-$(CONFIG_IWMMXT) += iwmmxt.o obj-$(CONFIG_CPU_HAS_PMU) += pmu.o obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt +obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o ifneq ($(CONFIG_ARCH_EBSA110),y) obj-y += io.o diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 16baba2e4369..1429d8989fb9 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -20,6 +20,7 @@ #include <asm/thread_info.h> #include <asm/memory.h> #include <asm/procinfo.h> +#include <asm/hardware/cache-l2x0.h> #include <linux/kbuild.h> /* @@ -92,6 +93,17 @@ int main(void) DEFINE(S_OLD_R0, offsetof(struct pt_regs, ARM_ORIG_r0)); DEFINE(S_FRAME_SIZE, sizeof(struct pt_regs)); BLANK(); +#ifdef CONFIG_CACHE_L2X0 + DEFINE(L2X0_R_PHY_BASE, offsetof(struct l2x0_regs, phy_base)); + DEFINE(L2X0_R_AUX_CTRL, offsetof(struct l2x0_regs, aux_ctrl)); + DEFINE(L2X0_R_TAG_LATENCY, offsetof(struct l2x0_regs, tag_latency)); + DEFINE(L2X0_R_DATA_LATENCY, offsetof(struct l2x0_regs, data_latency)); + DEFINE(L2X0_R_FILTER_START, offsetof(struct l2x0_regs, filter_start)); + DEFINE(L2X0_R_FILTER_END, offsetof(struct l2x0_regs, filter_end)); + DEFINE(L2X0_R_PREFETCH_CTRL, offsetof(struct l2x0_regs, prefetch_ctrl)); + DEFINE(L2X0_R_PWR_CTRL, offsetof(struct l2x0_regs, pwr_ctrl)); + BLANK(); +#endif #ifdef CONFIG_CPU_HAS_ASID DEFINE(MM_CONTEXT_ID, offsetof(struct mm_struct, context.id)); BLANK(); diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index d6df359408f0..c0d9203fc75e 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -412,6 +412,9 @@ void pcibios_fixup_bus(struct pci_bus *bus) printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n", bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis"); } +#ifdef CONFIG_HOTPLUG +EXPORT_SYMBOL(pcibios_fixup_bus); +#endif /* * Convert from Linux-centric to bus-centric addresses for bridge devices. @@ -431,6 +434,7 @@ pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, region->start = res->start - offset; region->end = res->end - offset; } +EXPORT_SYMBOL(pcibios_resource_to_bus); void __devinit pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, @@ -447,12 +451,7 @@ pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, res->start = region->start + offset; res->end = region->end + offset; } - -#ifdef CONFIG_HOTPLUG -EXPORT_SYMBOL(pcibios_fixup_bus); -EXPORT_SYMBOL(pcibios_resource_to_bus); EXPORT_SYMBOL(pcibios_bus_to_resource); -#endif /* * Swizzle the device pin each time we cross a bridge. diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 80f7896cc016..9943e9e74a1b 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -178,7 +178,7 @@ CALL(sys_ni_syscall) /* vm86 */ CALL(sys_ni_syscall) /* was sys_query_module */ CALL(sys_poll) - CALL(sys_nfsservctl) + CALL(sys_ni_syscall) /* was nfsservctl */ /* 170 */ CALL(sys_setresgid16) CALL(sys_getresgid16) CALL(sys_prctl) diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 742b6108a001..239703dbdf4f 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -21,6 +21,7 @@ #include <asm/memory.h> #include <asm/thread_info.h> #include <asm/system.h> +#include <asm/pgtable.h> #ifdef CONFIG_DEBUG_LL #include <mach/debug-macro.S> @@ -38,11 +39,14 @@ #error KERNEL_RAM_VADDR must start at 0xXXXX8000 #endif +#define PG_DIR_SIZE 0x4000 +#define PMD_ORDER 2 + .globl swapper_pg_dir - .equ swapper_pg_dir, KERNEL_RAM_VADDR - 0x4000 + .equ swapper_pg_dir, KERNEL_RAM_VADDR - PG_DIR_SIZE .macro pgtbl, rd, phys - add \rd, \phys, #TEXT_OFFSET - 0x4000 + add \rd, \phys, #TEXT_OFFSET - PG_DIR_SIZE .endm #ifdef CONFIG_XIP_KERNEL @@ -148,11 +152,11 @@ __create_page_tables: pgtbl r4, r8 @ page table address /* - * Clear the 16K level 1 swapper page table + * Clear the swapper page table */ mov r0, r4 mov r3, #0 - add r6, r0, #0x4000 + add r6, r0, #PG_DIR_SIZE 1: str r3, [r0], #4 str r3, [r0], #4 str r3, [r0], #4 @@ -171,30 +175,30 @@ __create_page_tables: sub r0, r0, r3 @ virt->phys offset add r5, r5, r0 @ phys __enable_mmu add r6, r6, r0 @ phys __enable_mmu_end - mov r5, r5, lsr #20 - mov r6, r6, lsr #20 + mov r5, r5, lsr #SECTION_SHIFT + mov r6, r6, lsr #SECTION_SHIFT -1: orr r3, r7, r5, lsl #20 @ flags + kernel base - str r3, [r4, r5, lsl #2] @ identity mapping - teq r5, r6 - addne r5, r5, #1 @ next section - bne 1b +1: orr r3, r7, r5, lsl #SECTION_SHIFT @ flags + kernel base + str r3, [r4, r5, lsl #PMD_ORDER] @ identity mapping + cmp r5, r6 + addlo r5, r5, #1 @ next section + blo 1b /* * Now setup the pagetables for our kernel direct * mapped region. */ mov r3, pc - mov r3, r3, lsr #20 - orr r3, r7, r3, lsl #20 - add r0, r4, #(KERNEL_START & 0xff000000) >> 18 - str r3, [r0, #(KERNEL_START & 0x00f00000) >> 18]! + mov r3, r3, lsr #SECTION_SHIFT + orr r3, r7, r3, lsl #SECTION_SHIFT + add r0, r4, #(KERNEL_START & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER) + str r3, [r0, #((KERNEL_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ORDER]! ldr r6, =(KERNEL_END - 1) - add r0, r0, #4 - add r6, r4, r6, lsr #18 + add r0, r0, #1 << PMD_ORDER + add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER) 1: cmp r0, r6 - add r3, r3, #1 << 20 - strls r3, [r0], #4 + add r3, r3, #1 << SECTION_SHIFT + strls r3, [r0], #1 << PMD_ORDER bls 1b #ifdef CONFIG_XIP_KERNEL @@ -203,11 +207,11 @@ __create_page_tables: */ add r3, r8, #TEXT_OFFSET orr r3, r3, r7 - add r0, r4, #(KERNEL_RAM_VADDR & 0xff000000) >> 18 - str r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> 18]! + add r0, r4, #(KERNEL_RAM_VADDR & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER) + str r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> (SECTION_SHIFT - PMD_ORDER)]! ldr r6, =(_end - 1) add r0, r0, #4 - add r6, r4, r6, lsr #18 + add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER) 1: cmp r0, r6 add r3, r3, #1 << 20 strls r3, [r0], #4 @@ -218,12 +222,12 @@ __create_page_tables: * Then map boot params address in r2 or * the first 1MB of ram if boot params address is not specified. */ - mov r0, r2, lsr #20 - movs r0, r0, lsl #20 + mov r0, r2, lsr #SECTION_SHIFT + movs r0, r0, lsl #SECTION_SHIFT moveq r0, r8 sub r3, r0, r8 add r3, r3, #PAGE_OFFSET - add r3, r4, r3, lsr #18 + add r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER) orr r6, r7, r0 str r6, [r3] @@ -236,21 +240,21 @@ __create_page_tables: */ addruart r7, r3 - mov r3, r3, lsr #20 - mov r3, r3, lsl #2 + mov r3, r3, lsr #SECTION_SHIFT + mov r3, r3, lsl #PMD_ORDER add r0, r4, r3 rsb r3, r3, #0x4000 @ PTRS_PER_PGD*sizeof(long) cmp r3, #0x0800 @ limit to 512MB movhi r3, #0x0800 add r6, r0, r3 - mov r3, r7, lsr #20 + mov r3, r7, lsr #SECTION_SHIFT ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags - orr r3, r7, r3, lsl #20 + orr r3, r7, r3, lsl #SECTION_SHIFT 1: str r3, [r0], #4 - add r3, r3, #1 << 20 - teq r0, r6 - bne 1b + add r3, r3, #1 << SECTION_SHIFT + cmp r0, r6 + blo 1b #else /* CONFIG_DEBUG_ICEDCC */ /* we don't need any serial debugging mappings for ICEDCC */ @@ -262,7 +266,7 @@ __create_page_tables: * If we're using the NetWinder or CATS, we also need to map * in the 16550-type serial port for the debug messages */ - add r0, r4, #0xff000000 >> 18 + add r0, r4, #0xff000000 >> (SECTION_SHIFT - PMD_ORDER) orr r3, r7, #0x7c000000 str r3, [r0] #endif @@ -272,10 +276,10 @@ __create_page_tables: * Similar reasons here - for debug. This is * only for Acorn RiscPC architectures. */ - add r0, r4, #0x02000000 >> 18 + add r0, r4, #0x02000000 >> (SECTION_SHIFT - PMD_ORDER) orr r3, r7, #0x02000000 str r3, [r0] - add r0, r4, #0xd8000000 >> 18 + add r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_ORDER) str r3, [r0] #endif #endif @@ -488,13 +492,8 @@ __fixup_pv_table: add r5, r5, r3 @ adjust table end address add r7, r7, r3 @ adjust __pv_phys_offset address str r8, [r7] @ save computed PHYS_OFFSET to __pv_phys_offset -#ifndef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT mov r6, r3, lsr #24 @ constant for add/sub instructions teq r3, r6, lsl #24 @ must be 16MiB aligned -#else - mov r6, r3, lsr #16 @ constant for add/sub instructions - teq r3, r6, lsl #16 @ must be 64kiB aligned -#endif THUMB( it ne @ cross section branch ) bne __error str r6, [r7, #4] @ save to __pv_offset @@ -510,20 +509,8 @@ ENDPROC(__fixup_pv_table) .text __fixup_a_pv_table: #ifdef CONFIG_THUMB2_KERNEL -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT - lsls r0, r6, #24 - lsr r6, #8 - beq 1f - clz r7, r0 - lsr r0, #24 - lsl r0, r7 - bic r0, 0x0080 - lsrs r7, #1 - orrcs r0, #0x0080 - orr r0, r0, r7, lsl #12 -#endif -1: lsls r6, #24 - beq 4f + lsls r6, #24 + beq 2f clz r7, r6 lsr r6, #24 lsl r6, r7 @@ -532,43 +519,25 @@ __fixup_a_pv_table: orrcs r6, #0x0080 orr r6, r6, r7, lsl #12 orr r6, #0x4000 - b 4f -2: @ at this point the C flag is always clear - add r7, r3 -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT - ldrh ip, [r7] - tst ip, 0x0400 @ the i bit tells us LS or MS byte - beq 3f - cmp r0, #0 @ set C flag, and ... - biceq ip, 0x0400 @ immediate zero value has a special encoding - streqh ip, [r7] @ that requires the i bit cleared -#endif -3: ldrh ip, [r7, #2] + b 2f +1: add r7, r3 + ldrh ip, [r7, #2] and ip, 0x8f00 - orrcc ip, r6 @ mask in offset bits 31-24 - orrcs ip, r0 @ mask in offset bits 23-16 + orr ip, r6 @ mask in offset bits 31-24 strh ip, [r7, #2] -4: cmp r4, r5 +2: cmp r4, r5 ldrcc r7, [r4], #4 @ use branch for delay slot - bcc 2b + bcc 1b bx lr #else -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT - and r0, r6, #255 @ offset bits 23-16 - mov r6, r6, lsr #8 @ offset bits 31-24 -#else - mov r0, #0 @ just in case... -#endif - b 3f -2: ldr ip, [r7, r3] + b 2f +1: ldr ip, [r7, r3] bic ip, ip, #0x000000ff - tst ip, #0x400 @ rotate shift tells us LS or MS byte - orrne ip, ip, r6 @ mask in offset bits 31-24 - orreq ip, ip, r0 @ mask in offset bits 23-16 + orr ip, ip, r6 @ mask in offset bits 31-24 str ip, [r7, r3] -3: cmp r4, r5 +2: cmp r4, r5 ldrcc r7, [r4], #4 @ use branch for delay slot - bcc 2b + bcc 1b mov pc, lr #endif ENDPROC(__fixup_a_pv_table) diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index de3dcab8610b..53919b230e8b 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -35,8 +35,8 @@ #include <linux/list.h> #include <linux/kallsyms.h> #include <linux/proc_fs.h> -#include <linux/ftrace.h> +#include <asm/exception.h> #include <asm/system.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S index 7fa3bb0d2397..a08783823b32 100644 --- a/arch/arm/kernel/iwmmxt.S +++ b/arch/arm/kernel/iwmmxt.S @@ -195,10 +195,10 @@ ENTRY(iwmmxt_task_disable) @ enable access to CP0 and CP1 XSC(mrc p15, 0, r4, c15, c1, 0) - XSC(orr r4, r4, #0xf) + XSC(orr r4, r4, #0x3) XSC(mcr p15, 0, r4, c15, c1, 0) PJ4(mrc p15, 0, r4, c1, c0, 2) - PJ4(orr r4, r4, #0x3) + PJ4(orr r4, r4, #0xf) PJ4(mcr p15, 0, r4, c1, c0, 2) mov r0, #0 @ nothing to load @@ -313,7 +313,7 @@ ENTRY(iwmmxt_task_switch) teq r2, r3 @ next task owns it? movne pc, lr @ no: leave Concan disabled -1: @ flip Conan access +1: @ flip Concan access XSC(eor r1, r1, #0x3) XSC(mcr p15, 0, r1, c15, c1, 0) PJ4(eor r1, r1, #0xf) diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 05b377616fd5..1e9be5d25e56 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -33,7 +33,7 @@ * recompiling the whole kernel when CONFIG_XIP_KERNEL is turned on/off. */ #undef MODULES_VADDR -#define MODULES_VADDR (((unsigned long)_etext + ~PGDIR_MASK) & PGDIR_MASK) +#define MODULES_VADDR (((unsigned long)_etext + ~PMD_MASK) & PMD_MASK) #endif #ifdef CONFIG_MMU @@ -323,7 +323,11 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, #endif s = find_mod_section(hdr, sechdrs, ".alt.smp.init"); if (s && !is_smp()) +#ifdef CONFIG_SMP_ON_UP fixup_smp((void *)s->sh_addr, s->sh_size); +#else + return -EINVAL; +#endif return 0; } diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 4c851834f68e..6be3e2e4d838 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -321,8 +321,8 @@ static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = { [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE, - [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_COHERENT_LINE_HIT, - [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_COHERENT_LINE_MISS, + [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_DCACHE_ACCESS, + [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_DCACHE_REFILL, [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c index 2b70709376c3..c53474fe84df 100644 --- a/arch/arm/kernel/pmu.c +++ b/arch/arm/kernel/pmu.c @@ -31,7 +31,7 @@ static int __devinit pmu_register(struct platform_device *pdev, { if (type < 0 || type >= ARM_NUM_PMU_DEVICES) { pr_warning("received registration request for unknown " - "device %d\n", type); + "PMU device type %d\n", type); return -EINVAL; } @@ -112,17 +112,17 @@ static int __init register_pmu_driver(void) device_initcall(register_pmu_driver); struct platform_device * -reserve_pmu(enum arm_pmu_type device) +reserve_pmu(enum arm_pmu_type type) { struct platform_device *pdev; - if (test_and_set_bit_lock(device, &pmu_lock)) { + if (test_and_set_bit_lock(type, &pmu_lock)) { pdev = ERR_PTR(-EBUSY); - } else if (pmu_devices[device] == NULL) { - clear_bit_unlock(device, &pmu_lock); + } else if (pmu_devices[type] == NULL) { + clear_bit_unlock(type, &pmu_lock); pdev = ERR_PTR(-ENODEV); } else { - pdev = pmu_devices[device]; + pdev = pmu_devices[type]; } return pdev; @@ -130,11 +130,11 @@ reserve_pmu(enum arm_pmu_type device) EXPORT_SYMBOL_GPL(reserve_pmu); int -release_pmu(enum arm_pmu_type device) +release_pmu(enum arm_pmu_type type) { - if (WARN_ON(!pmu_devices[device])) + if (WARN_ON(!pmu_devices[type])) return -EINVAL; - clear_bit_unlock(device, &pmu_lock); + clear_bit_unlock(type, &pmu_lock); return 0; } EXPORT_SYMBOL_GPL(release_pmu); @@ -182,17 +182,17 @@ init_cpu_pmu(void) } int -init_pmu(enum arm_pmu_type device) +init_pmu(enum arm_pmu_type type) { int err = 0; - switch (device) { + switch (type) { case ARM_PMU_DEVICE_CPU: err = init_cpu_pmu(); break; default: - pr_warning("attempt to initialise unknown device %d\n", - device); + pr_warning("attempt to initialise PMU of unknown " + "type %d\n", type); err = -EINVAL; } diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S index 9cf4cbf8f95b..d0cdedf4864d 100644 --- a/arch/arm/kernel/relocate_kernel.S +++ b/arch/arm/kernel/relocate_kernel.S @@ -57,7 +57,8 @@ relocate_new_kernel: mov r0,#0 ldr r1,kexec_mach_type ldr r2,kexec_boot_atags - mov pc,lr + ARM( mov pc, lr ) + THUMB( bx lr ) .align diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 70bca649e925..e514c76043b4 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -280,18 +280,19 @@ static void __init cacheid_init(void) if (arch >= CPU_ARCH_ARMv6) { if ((cachetype & (7 << 29)) == 4 << 29) { /* ARMv7 register format */ + arch = CPU_ARCH_ARMv7; cacheid = CACHEID_VIPT_NONALIASING; if ((cachetype & (3 << 14)) == 1 << 14) cacheid |= CACHEID_ASID_TAGGED; - else if (cpu_has_aliasing_icache(CPU_ARCH_ARMv7)) - cacheid |= CACHEID_VIPT_I_ALIASING; - } else if (cachetype & (1 << 23)) { - cacheid = CACHEID_VIPT_ALIASING; } else { - cacheid = CACHEID_VIPT_NONALIASING; - if (cpu_has_aliasing_icache(CPU_ARCH_ARMv6)) - cacheid |= CACHEID_VIPT_I_ALIASING; + arch = CPU_ARCH_ARMv6; + if (cachetype & (1 << 23)) + cacheid = CACHEID_VIPT_ALIASING; + else + cacheid = CACHEID_VIPT_NONALIASING; } + if (cpu_has_aliasing_icache(arch)) + cacheid |= CACHEID_VIPT_I_ALIASING; } else { cacheid = CACHEID_VIVT; } diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index d88ff0230e82..35417d0fb8ab 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -16,7 +16,6 @@ #include <linux/cache.h> #include <linux/profile.h> #include <linux/errno.h> -#include <linux/ftrace.h> #include <linux/mm.h> #include <linux/err.h> #include <linux/cpu.h> @@ -31,6 +30,8 @@ #include <asm/cacheflush.h> #include <asm/cpu.h> #include <asm/cputype.h> +#include <asm/exception.h> +#include <asm/topology.h> #include <asm/mmu_context.h> #include <asm/pgtable.h> #include <asm/pgalloc.h> @@ -39,6 +40,7 @@ #include <asm/tlbflush.h> #include <asm/ptrace.h> #include <asm/localtimer.h> +#include <asm/smp_plat.h> /* * as from 2.5, kernels no longer have an init_tasks structure @@ -259,6 +261,20 @@ void __ref cpu_die(void) } #endif /* CONFIG_HOTPLUG_CPU */ +int __cpu_logical_map[NR_CPUS]; + +void __init smp_setup_processor_id(void) +{ + int i; + u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0; + + cpu_logical_map(0) = cpu; + for (i = 1; i < NR_CPUS; ++i) + cpu_logical_map(i) = i == cpu ? 0 : i; + + printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu); +} + /* * Called by both boot and secondaries to move global data into * per-processor storage. @@ -268,6 +284,8 @@ static void __cpuinit smp_store_cpu_info(unsigned int cpuid) struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid); cpu_info->loops_per_jiffy = loops_per_jiffy; + + store_cpu_topology(cpuid); } /* @@ -358,6 +376,8 @@ void __init smp_prepare_cpus(unsigned int max_cpus) { unsigned int ncores = num_possible_cpus(); + init_cpu_topology(); + smp_store_cpu_info(smp_processor_id()); /* @@ -460,6 +480,11 @@ static void ipi_timer(void) #ifdef CONFIG_LOCAL_TIMERS asmlinkage void __exception_irq_entry do_local_timer(struct pt_regs *regs) { + handle_local_timer(regs); +} + +void handle_local_timer(struct pt_regs *regs) +{ struct pt_regs *old_regs = set_irq_regs(regs); int cpu = smp_processor_id(); @@ -567,6 +592,11 @@ static void ipi_cpu_stop(unsigned int cpu) */ asmlinkage void __exception_irq_entry do_IPI(int ipinr, struct pt_regs *regs) { + handle_IPI(ipinr, regs); +} + +void handle_IPI(int ipinr, struct pt_regs *regs) +{ unsigned int cpu = smp_processor_id(); struct pt_regs *old_regs = set_irq_regs(regs); diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index 79ed5e7f204a..8f5dd7963356 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -13,6 +13,7 @@ #include <asm/smp_scu.h> #include <asm/cacheflush.h> +#include <asm/cputype.h> #define SCU_CTRL 0x00 #define SCU_CONFIG 0x04 @@ -33,10 +34,19 @@ unsigned int __init scu_get_core_count(void __iomem *scu_base) /* * Enable the SCU */ -void __init scu_enable(void __iomem *scu_base) +void scu_enable(void __iomem *scu_base) { u32 scu_ctrl; +#ifdef CONFIG_ARM_ERRATA_764369 + /* Cortex-A9 only */ + if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) { + scu_ctrl = __raw_readl(scu_base + 0x30); + if (!(scu_ctrl & 1)) + __raw_writel(scu_ctrl | 0x1, scu_base + 0x30); + } +#endif + scu_ctrl = __raw_readl(scu_base + SCU_CTRL); /* already enabled? */ if (scu_ctrl & 1) diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 2c277d40cee6..01c186222f3b 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -137,8 +137,8 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk) clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk); clk->min_delta_ns = clockevent_delta2ns(0xf, clk); + clockevents_register_device(clk); + /* Make sure our local interrupt controller has this enabled */ gic_enable_ppi(clk->irq); - - clockevents_register_device(clk); } diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index cb634c3e28e9..5a54b95d6bd2 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -39,13 +39,11 @@ */ static struct sys_timer *system_timer; -#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) +#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || \ + defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE) /* this needs a better home */ DEFINE_SPINLOCK(rtc_lock); - -#ifdef CONFIG_RTC_DRV_CMOS_MODULE EXPORT_SYMBOL(rtc_lock); -#endif #endif /* pc-style 'CMOS' RTC support */ /* change this if you have some constant time drift */ diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c new file mode 100644 index 000000000000..1040c00405d0 --- /dev/null +++ b/arch/arm/kernel/topology.c @@ -0,0 +1,148 @@ +/* + * arch/arm/kernel/topology.c + * + * Copyright (C) 2011 Linaro Limited. + * Written by: Vincent Guittot + * + * based on arch/sh/kernel/topology.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/cpu.h> +#include <linux/cpumask.h> +#include <linux/init.h> +#include <linux/percpu.h> +#include <linux/node.h> +#include <linux/nodemask.h> +#include <linux/sched.h> + +#include <asm/cputype.h> +#include <asm/topology.h> + +#define MPIDR_SMP_BITMASK (0x3 << 30) +#define MPIDR_SMP_VALUE (0x2 << 30) + +#define MPIDR_MT_BITMASK (0x1 << 24) + +/* + * These masks reflect the current use of the affinity levels. + * The affinity level can be up to 16 bits according to ARM ARM + */ + +#define MPIDR_LEVEL0_MASK 0x3 +#define MPIDR_LEVEL0_SHIFT 0 + +#define MPIDR_LEVEL1_MASK 0xF +#define MPIDR_LEVEL1_SHIFT 8 + +#define MPIDR_LEVEL2_MASK 0xFF +#define MPIDR_LEVEL2_SHIFT 16 + +struct cputopo_arm cpu_topology[NR_CPUS]; + +const struct cpumask *cpu_coregroup_mask(unsigned int cpu) +{ + return &cpu_topology[cpu].core_sibling; +} + +/* + * store_cpu_topology is called at boot when only one cpu is running + * and with the mutex cpu_hotplug.lock locked, when several cpus have booted, + * which prevents simultaneous write access to cpu_topology array + */ +void store_cpu_topology(unsigned int cpuid) +{ + struct cputopo_arm *cpuid_topo = &cpu_topology[cpuid]; + unsigned int mpidr; + unsigned int cpu; + + /* If the cpu topology has been already set, just return */ + if (cpuid_topo->core_id != -1) + return; + + mpidr = read_cpuid_mpidr(); + + /* create cpu topology mapping */ + if ((mpidr & MPIDR_SMP_BITMASK) == MPIDR_SMP_VALUE) { + /* + * This is a multiprocessor system + * multiprocessor format & multiprocessor mode field are set + */ + + if (mpidr & MPIDR_MT_BITMASK) { + /* core performance interdependency */ + cpuid_topo->thread_id = (mpidr >> MPIDR_LEVEL0_SHIFT) + & MPIDR_LEVEL0_MASK; + cpuid_topo->core_id = (mpidr >> MPIDR_LEVEL1_SHIFT) + & MPIDR_LEVEL1_MASK; + cpuid_topo->socket_id = (mpidr >> MPIDR_LEVEL2_SHIFT) + & MPIDR_LEVEL2_MASK; + } else { + /* largely independent cores */ + cpuid_topo->thread_id = -1; + cpuid_topo->core_id = (mpidr >> MPIDR_LEVEL0_SHIFT) + & MPIDR_LEVEL0_MASK; + cpuid_topo->socket_id = (mpidr >> MPIDR_LEVEL1_SHIFT) + & MPIDR_LEVEL1_MASK; + } + } else { + /* + * This is an uniprocessor system + * we are in multiprocessor format but uniprocessor system + * or in the old uniprocessor format + */ + cpuid_topo->thread_id = -1; + cpuid_topo->core_id = 0; + cpuid_topo->socket_id = -1; + } + + /* update core and thread sibling masks */ + for_each_possible_cpu(cpu) { + struct cputopo_arm *cpu_topo = &cpu_topology[cpu]; + + if (cpuid_topo->socket_id == cpu_topo->socket_id) { + cpumask_set_cpu(cpuid, &cpu_topo->core_sibling); + if (cpu != cpuid) + cpumask_set_cpu(cpu, + &cpuid_topo->core_sibling); + + if (cpuid_topo->core_id == cpu_topo->core_id) { + cpumask_set_cpu(cpuid, + &cpu_topo->thread_sibling); + if (cpu != cpuid) + cpumask_set_cpu(cpu, + &cpuid_topo->thread_sibling); + } + } + } + smp_wmb(); + + printk(KERN_INFO "CPU%u: thread %d, cpu %d, socket %d, mpidr %x\n", + cpuid, cpu_topology[cpuid].thread_id, + cpu_topology[cpuid].core_id, + cpu_topology[cpuid].socket_id, mpidr); +} + +/* + * init_cpu_topology is called at boot when only one cpu is running + * which prevent simultaneous write access to cpu_topology array + */ +void init_cpu_topology(void) +{ + unsigned int cpu; + + /* init core mask */ + for_each_possible_cpu(cpu) { + struct cputopo_arm *cpu_topo = &(cpu_topology[cpu]); + + cpu_topo->thread_id = -1; + cpu_topo->core_id = -1; + cpu_topo->socket_id = -1; + cpumask_clear(&cpu_topo->core_sibling); + cpumask_clear(&cpu_topo->thread_sibling); + } + smp_wmb(); +} diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index bc9f9da782cb..210382555af1 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -27,6 +27,7 @@ #include <linux/atomic.h> #include <asm/cacheflush.h> +#include <asm/exception.h> #include <asm/system.h> #include <asm/unistd.h> #include <asm/traps.h> diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index bf977f8514f6..4e66f62b8d41 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -23,8 +23,10 @@ #if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK) #define ARM_EXIT_KEEP(x) x +#define ARM_EXIT_DISCARD(x) #else #define ARM_EXIT_KEEP(x) +#define ARM_EXIT_DISCARD(x) x #endif OUTPUT_ARCH(arm) @@ -39,6 +41,11 @@ jiffies = jiffies_64 + 4; SECTIONS { /* + * XXX: The linker does not define how output sections are + * assigned to input sections when there are multiple statements + * matching the same input section name. There is no documented + * order of matching. + * * unwind exit sections must be discarded before the rest of the * unwind sections get included. */ @@ -47,6 +54,9 @@ SECTIONS *(.ARM.extab.exit.text) ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text)) ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text)) + ARM_EXIT_DISCARD(EXIT_TEXT) + ARM_EXIT_DISCARD(EXIT_DATA) + EXIT_CALL #ifndef CONFIG_HOTPLUG *(.ARM.exidx.devexit.text) *(.ARM.extab.devexit.text) @@ -58,6 +68,8 @@ SECTIONS #ifndef CONFIG_SMP_ON_UP *(.alt.smp.init) #endif + *(.discard) + *(.discard.*) } #ifdef CONFIG_XIP_KERNEL @@ -279,9 +291,6 @@ SECTIONS STABS_DEBUG .comment 0 : { *(.comment) } - - /* Default discards */ - DISCARDS } /* diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c index 8b9b13649f81..025f742dd4df 100644 --- a/arch/arm/lib/uaccess_with_memcpy.c +++ b/arch/arm/lib/uaccess_with_memcpy.c @@ -17,6 +17,7 @@ #include <linux/sched.h> #include <linux/hardirq.h> /* for in_atomic() */ #include <linux/gfp.h> +#include <linux/highmem.h> #include <asm/current.h> #include <asm/page.h> diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index d522b47e30b5..6c8e3b5f669f 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -157,7 +157,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), - CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), diff --git a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S index 6bd83ed90afe..d87bfc397d39 100644 --- a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S +++ b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S @@ -8,7 +8,6 @@ * published by the Free Software Foundation. */ -#include <mach/hardware.h> #include <asm/hardware/entry-macro-gic.S> .macro disable_fiq diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h index 58bb03ae3cf4..4f16c9b79f78 100644 --- a/arch/arm/mach-cns3xxx/include/mach/system.h +++ b/arch/arm/mach-cns3xxx/include/mach/system.h @@ -13,7 +13,6 @@ #include <linux/io.h> #include <asm/proc-fns.h> -#include <mach/hardware.h> static inline void arch_idle(void) { diff --git a/arch/arm/mach-cns3xxx/include/mach/uncompress.h b/arch/arm/mach-cns3xxx/include/mach/uncompress.h index de8ead9b91f7..a91b6058ab4f 100644 --- a/arch/arm/mach-cns3xxx/include/mach/uncompress.h +++ b/arch/arm/mach-cns3xxx/include/mach/uncompress.h @@ -8,7 +8,6 @@ */ #include <asm/mach-types.h> -#include <mach/hardware.h> #include <mach/cns3xxx.h> #define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index 06fd25d70aec..0f8fca48a5ed 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -49,7 +49,7 @@ static struct cns3xxx_pcie *sysdata_to_cnspci(void *sysdata) return &cns3xxx_pcie[root->domain]; } -static struct cns3xxx_pcie *pdev_to_cnspci(struct pci_dev *dev) +static struct cns3xxx_pcie *pdev_to_cnspci(const struct pci_dev *dev) { return sysdata_to_cnspci(dev->sysdata); } diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index bd5394537c88..008d51407cd7 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -115,6 +115,32 @@ static struct spi_board_info da850evm_spi_info[] = { }, }; +#ifdef CONFIG_MTD +static void da850_evm_m25p80_notify_add(struct mtd_info *mtd) +{ + char *mac_addr = davinci_soc_info.emac_pdata->mac_addr; + size_t retlen; + + if (!strcmp(mtd->name, "MAC-Address")) { + mtd->read(mtd, 0, ETH_ALEN, &retlen, mac_addr); + if (retlen == ETH_ALEN) + pr_info("Read MAC addr from SPI Flash: %pM\n", + mac_addr); + } +} + +static struct mtd_notifier da850evm_spi_notifier = { + .add = da850_evm_m25p80_notify_add, +}; + +static void da850_evm_setup_mac_addr(void) +{ + register_mtd_user(&da850evm_spi_notifier); +} +#else +static void da850_evm_setup_mac_addr(void) { } +#endif + static struct mtd_partition da850_evm_norflash_partition[] = { { .name = "bootloaders + env", @@ -1244,6 +1270,8 @@ static __init void da850_evm_init(void) if (ret) pr_warning("da850_evm_init: sata registration failed: %d\n", ret); + + da850_evm_setup_mac_addr(); } #ifdef CONFIG_SERIAL_8250_CONSOLE diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 47fd0bc3d3e7..fa59c097223d 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -243,7 +243,7 @@ #define PSC_STATE_DISABLE 2 #define PSC_STATE_ENABLE 3 -#define MDSTAT_STATE_MASK 0x1f +#define MDSTAT_STATE_MASK 0x3f #define MDCTL_FORCE BIT(31) #ifndef __ASSEMBLER__ diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S index fb5e72b532b0..5f1e045a3ad1 100644 --- a/arch/arm/mach-davinci/sleep.S +++ b/arch/arm/mach-davinci/sleep.S @@ -217,7 +217,11 @@ ddr2clk_stop_done: ENDPROC(davinci_ddr_psc_config) CACHE_FLUSH: - .word arm926_flush_kern_cache_all +#ifdef CONFIG_CPU_V6 + .word v6_flush_kern_cache_all +#else + .word arm926_flush_kern_cache_all +#endif ENTRY(davinci_cpu_suspend_sz) .word . - davinci_cpu_suspend diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 83dce859886d..a9e0dae86a26 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -158,7 +158,7 @@ void __init dove_spi0_init(void) void __init dove_spi1_init(void) { - orion_spi_init(DOVE_SPI1_PHYS_BASE, get_tclk()); + orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk()); } /***************************************************************************** diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h index 0eabec62cd9d..f1397a13e76b 100644 --- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h +++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h @@ -6,7 +6,7 @@ * TS72xx memory map: * * virt phys size - * febff000 22000000 4K model number register + * febff000 22000000 4K model number register (bits 0-2) * febfe000 22400000 4K options register * febfd000 22800000 4K options register #2 * febf9000 10800000 4K TS-5620 RTC index register @@ -20,6 +20,9 @@ #define TS72XX_MODEL_TS7200 0x00 #define TS72XX_MODEL_TS7250 0x01 #define TS72XX_MODEL_TS7260 0x02 +#define TS72XX_MODEL_TS7300 0x03 +#define TS72XX_MODEL_TS7400 0x04 +#define TS72XX_MODEL_MASK 0x07 #define TS72XX_OPTIONS_PHYS_BASE 0x22400000 @@ -51,19 +54,34 @@ #ifndef __ASSEMBLY__ +static inline int ts72xx_model(void) +{ + return __raw_readb(TS72XX_MODEL_VIRT_BASE) & TS72XX_MODEL_MASK; +} + static inline int board_is_ts7200(void) { - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200; + return ts72xx_model() == TS72XX_MODEL_TS7200; } static inline int board_is_ts7250(void) { - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250; + return ts72xx_model() == TS72XX_MODEL_TS7250; } static inline int board_is_ts7260(void) { - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260; + return ts72xx_model() == TS72XX_MODEL_TS7260; +} + +static inline int board_is_ts7300(void) +{ + return ts72xx_model() == TS72XX_MODEL_TS7300; +} + +static inline int board_is_ts7400(void) +{ + return ts72xx_model() == TS72XX_MODEL_TS7400; } static inline int is_max197_installed(void) diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index 0c77ab99fa16..fc1f92dfbea8 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -12,6 +12,7 @@ if ARCH_EXYNOS4 config CPU_EXYNOS4210 bool select S3C_PL330_DMA + select ARM_CPU_SUSPEND if PM help Enable EXYNOS4210 CPU support diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c index 851dea018578..86964d2e9e1b 100644 --- a/arch/arm/mach-exynos4/clock.c +++ b/arch/arm/mach-exynos4/clock.c @@ -520,7 +520,7 @@ static struct clk init_clocks_off[] = { .ctrlbit = (1 << 21), }, { .name = "ac97", - .id = -1, + .devname = "samsung-ac97", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 27), }, { @@ -899,8 +899,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "exynos4-fimc.0", + .name = "sclk_cam0", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 16), }, @@ -909,8 +908,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "exynos4-fimc.1", + .name = "sclk_cam1", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 20), }, @@ -1160,7 +1158,7 @@ void __init_or_cpufreq exynos4_setup_clocks(void) vpllsrc = clk_get_rate(&clk_vpllsrc.clk); vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), - __raw_readl(S5P_VPLL_CON1), pll_4650); + __raw_readl(S5P_VPLL_CON1), pll_4650c); clk_fout_apll.ops = &exynos4_fout_apll_ops; clk_fout_mpll.rate = mpll; diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c index 2d8a40c9e6e5..746d6fc6d397 100644 --- a/arch/arm/mach-exynos4/cpu.c +++ b/arch/arm/mach-exynos4/cpu.c @@ -24,12 +24,13 @@ #include <plat/exynos4.h> #include <plat/adc-core.h> #include <plat/sdhci.h> -#include <plat/devs.h> #include <plat/fb-core.h> #include <plat/fimc-core.h> #include <plat/iic-core.h> +#include <plat/reset.h> #include <mach/regs-irq.h> +#include <mach/regs-pmu.h> extern int combiner_init(unsigned int combiner_nr, void __iomem *base, unsigned int irq_start); @@ -128,6 +129,11 @@ static void exynos4_idle(void) local_irq_enable(); } +static void exynos4_sw_reset(void) +{ + __raw_writel(0x1, S5P_SWRESET); +} + /* * exynos4_map_io * @@ -241,5 +247,8 @@ int __init exynos4_init(void) /* set idle function */ pm_idle = exynos4_idle; + /* set sw_reset function */ + s5p_reset_hook = exynos4_sw_reset; + return sysdev_register(&exynos4_sysdev); } diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h index 934d2a493982..f8952f8f3757 100644 --- a/arch/arm/mach-exynos4/include/mach/irqs.h +++ b/arch/arm/mach-exynos4/include/mach/irqs.h @@ -80,9 +80,8 @@ #define IRQ_HSMMC3 IRQ_SPI(76) #define IRQ_DWMCI IRQ_SPI(77) -#define IRQ_MIPICSI0 IRQ_SPI(78) - -#define IRQ_MIPICSI1 IRQ_SPI(80) +#define IRQ_MIPI_CSIS0 IRQ_SPI(78) +#define IRQ_MIPI_CSIS1 IRQ_SPI(80) #define IRQ_ONENAND_AUDI IRQ_SPI(82) #define IRQ_ROTATOR IRQ_SPI(83) diff --git a/arch/arm/mach-exynos4/include/mach/regs-pmu.h b/arch/arm/mach-exynos4/include/mach/regs-pmu.h index fa49bbb8e7b0..cdf9b47c303c 100644 --- a/arch/arm/mach-exynos4/include/mach/regs-pmu.h +++ b/arch/arm/mach-exynos4/include/mach/regs-pmu.h @@ -29,6 +29,8 @@ #define S5P_USE_STANDBY_WFE1 (1 << 25) #define S5P_USE_MASK ((0x3 << 16) | (0x3 << 24)) +#define S5P_SWRESET S5P_PMUREG(0x0400) + #define S5P_WAKEUP_STAT S5P_PMUREG(0x0600) #define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604) #define S5P_WAKEUP_MASK S5P_PMUREG(0x0608) diff --git a/arch/arm/mach-exynos4/irq-eint.c b/arch/arm/mach-exynos4/irq-eint.c index 9d87d2ac7f68..badb8c66fc9b 100644 --- a/arch/arm/mach-exynos4/irq-eint.c +++ b/arch/arm/mach-exynos4/irq-eint.c @@ -23,6 +23,8 @@ #include <mach/regs-gpio.h> +#include <asm/mach/irq.h> + static DEFINE_SPINLOCK(eint_lock); static unsigned int eint0_15_data[16]; @@ -184,8 +186,11 @@ static inline void exynos4_irq_demux_eint(unsigned int start) static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) { + struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); exynos4_irq_demux_eint(IRQ_EINT(16)); exynos4_irq_demux_eint(IRQ_EINT(24)); + chained_irq_exit(chip, desc); } static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) @@ -193,6 +198,7 @@ static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) u32 *irq_data = irq_get_handler_data(irq); struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); chip->irq_mask(&desc->irq_data); if (chip->irq_ack) @@ -201,6 +207,7 @@ static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) generic_handle_irq(*irq_data); chip->irq_unmask(&desc->irq_data); + chained_irq_exit(chip, desc); } int __init exynos4_init_irq_eint(void) diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c index 0e280d12301e..b3b5d8911004 100644 --- a/arch/arm/mach-exynos4/mach-universal_c210.c +++ b/arch/arm/mach-exynos4/mach-universal_c210.c @@ -79,7 +79,7 @@ static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = { }; static struct regulator_consumer_supply max8952_consumer = - REGULATOR_SUPPLY("vddarm", NULL); + REGULATOR_SUPPLY("vdd_arm", NULL); static struct max8952_platform_data universal_max8952_pdata __initdata = { .gpio_vid0 = EXYNOS4_GPX0(3), @@ -105,7 +105,7 @@ static struct max8952_platform_data universal_max8952_pdata __initdata = { }; static struct regulator_consumer_supply lp3974_buck1_consumer = - REGULATOR_SUPPLY("vddint", NULL); + REGULATOR_SUPPLY("vdd_int", NULL); static struct regulator_consumer_supply lp3974_buck2_consumer = REGULATOR_SUPPLY("vddg3d", NULL); diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c index 1ae059b7ad7b..ddd86864fb83 100644 --- a/arch/arm/mach-exynos4/mct.c +++ b/arch/arm/mach-exynos4/mct.c @@ -132,12 +132,18 @@ static cycle_t exynos4_frc_read(struct clocksource *cs) return ((cycle_t)hi << 32) | lo; } +static void exynos4_frc_resume(struct clocksource *cs) +{ + exynos4_mct_frc_start(0, 0); +} + struct clocksource mct_frc = { .name = "mct-frc", .rating = 400, .read = exynos4_frc_read, .mask = CLOCKSOURCE_MASK(64), .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .resume = exynos4_frc_resume, }; static void __init exynos4_clocksource_init(void) @@ -389,9 +395,11 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt) } /* Setup the local clock events for a CPU */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { exynos4_mct_tick_init(evt); + + return 0; } int local_timer_ack(void) diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c index 7c2282c6ba81..0c90896ad9a0 100644 --- a/arch/arm/mach-exynos4/platsmp.c +++ b/arch/arm/mach-exynos4/platsmp.c @@ -106,6 +106,8 @@ void __cpuinit platform_secondary_init(unsigned int cpu) */ spin_lock(&boot_lock); spin_unlock(&boot_lock); + + set_cpu_online(cpu, true); } int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) @@ -191,12 +193,10 @@ void __init smp_init_cpus(void) ncores = scu_base ? scu_get_core_count(scu_base) : 1; /* sanity check */ - if (ncores > NR_CPUS) { - printk(KERN_WARNING - "EXYNOS4: no. of cores (%d) greater than configured " - "maximum of %d - clipping\n", - ncores, NR_CPUS); - ncores = NR_CPUS; + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; } for (i = 0; i < ncores; i++) diff --git a/arch/arm/mach-exynos4/setup-keypad.c b/arch/arm/mach-exynos4/setup-keypad.c index 1ee0ebff111f..7862bfb5933d 100644 --- a/arch/arm/mach-exynos4/setup-keypad.c +++ b/arch/arm/mach-exynos4/setup-keypad.c @@ -19,15 +19,16 @@ void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols) if (rows > 8) { /* Set all the necessary GPX2 pins: KP_ROW[0~7] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3), + S3C_GPIO_PULL_UP); /* Set all the necessary GPX3 pins: KP_ROW[8~] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX3(0), (rows - 8), - S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX3(0), (rows - 8), + S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); } else { /* Set all the necessary GPX2 pins: KP_ROW[x] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), rows, - S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), rows, S3C_GPIO_SFN(3), + S3C_GPIO_PULL_UP); } /* Set all the necessary GPX1 pins to special-function 3: KP_COL[x] */ diff --git a/arch/arm/mach-exynos4/setup-usb-phy.c b/arch/arm/mach-exynos4/setup-usb-phy.c index 0883c1b824b9..39aca045f660 100644 --- a/arch/arm/mach-exynos4/setup-usb-phy.c +++ b/arch/arm/mach-exynos4/setup-usb-phy.c @@ -82,7 +82,7 @@ static int exynos4_usb_phy1_init(struct platform_device *pdev) rstcon &= ~(HOST_LINK_PORT_SWRST_MASK | PHY1_SWRST_MASK); writel(rstcon, EXYNOS4_RSTCON); - udelay(50); + udelay(80); clk_disable(otg_clk); clk_put(otg_clk); diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index dc26fff22cf0..c8e7afcf14ec 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -62,6 +62,7 @@ config ARCH_EBSA285_HOST config ARCH_NETWINDER bool "NetWinder" select CLKSRC_I8253 + select CLKEVT_I8253 select FOOTBRIDGE_HOST select ISA select ISA_DMA diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index 1331fff51ae2..18c32a5541d9 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -18,6 +18,7 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/spinlock.h> +#include <video/vga.h> #include <asm/irq.h> #include <asm/system.h> diff --git a/arch/arm/mach-imx/clock-imx25.c b/arch/arm/mach-imx/clock-imx25.c index 0fc7ba56d616..e63e23504fe5 100644 --- a/arch/arm/mach-imx/clock-imx25.c +++ b/arch/arm/mach-imx/clock-imx25.c @@ -331,6 +331,9 @@ int __init mx25_clocks_init(void) __raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7) | (1 << 0), CRM_BASE + 0x64); + /* Clock source for gpt is ahb_div */ + __raw_writel(__raw_readl(CRM_BASE+0x64) & ~(1 << 5), CRM_BASE + 0x64); + mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); return 0; diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 87887ac5806b..f851fe903687 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -310,7 +310,7 @@ static struct sys_timer eukrea_cpuimx27_timer = { .init = eukrea_cpuimx27_timer_init, }; -MACHINE_START(CPUIMX27, "EUKREA CPUIMX27") +MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27") .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index f39a478ba1a6..4bd083ba9af2 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -192,7 +192,7 @@ struct sys_timer eukrea_cpuimx35_timer = { .init = eukrea_cpuimx35_timer_init, }; -MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35") +MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35") /* Maintainer: Eukrea Electromatique */ .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx35_map_io, diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index da36da52969d..2442d5da883d 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -161,7 +161,7 @@ static struct sys_timer eukrea_cpuimx25_timer = { .init = eukrea_cpuimx25_timer_init, }; -MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25") +MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25") /* Maintainer: Eukrea Electromatique */ .boot_params = MX25_PHYS_OFFSET + 0x100, .map_io = mx25_map_io, diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 6707de0ab716..6778f8193bc6 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -30,6 +30,7 @@ #include <linux/input.h> #include <linux/gpio.h> #include <linux/delay.h> +#include <sound/tlv320aic32x4.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> @@ -196,6 +197,17 @@ static struct pca953x_platform_data visstrim_m10_pca9555_pdata = { .invert = 0, }; +static struct aic32x4_pdata visstrim_m10_aic32x4_pdata = { + .power_cfg = AIC32X4_PWR_MICBIAS_2075_LDOIN | + AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE | + AIC32X4_PWR_AIC32X4_LDO_ENABLE | + AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36 | + AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED, + .micpga_routing = AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K | + AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K, + .swapdacs = false, +}; + static struct i2c_board_info visstrim_m10_i2c_devices[] = { { I2C_BOARD_INFO("pca9555", 0x20), @@ -203,6 +215,7 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = { }, { I2C_BOARD_INFO("tlv320aic32x4", 0x18), + .platform_data = &visstrim_m10_aic32x4_pdata, } }; diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index 0ce49478a479..29ca8907a780 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -468,7 +468,7 @@ static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = { #endif }; -static void mxc_init_i2c(void) +static void __init mxc_init_i2c(void) { i2c_register_board_info(1, mx31ads_i2c1_devices, ARRAY_SIZE(mx31ads_i2c1_devices)); @@ -486,7 +486,7 @@ static unsigned int ssi_pins[] = { MX31_PIN_STXD5__STXD5, }; -static void mxc_init_audio(void) +static void __init mxc_init_audio(void) { imx31_add_imx_ssi(0, NULL); mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi"); diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 750368ddf0f9..126913ad106a 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -192,7 +192,7 @@ static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, }; -static void lilly1131_usb_init(void) +static void __init lilly1131_usb_init(void) { imx31_add_mxc_ehci_hs(1, &usbh1_pdata); diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 2fbbdd5eac35..8cdc730dcb3a 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -32,6 +32,7 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/mtd/physmap.h> +#include <video/vga.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -154,6 +155,7 @@ static struct map_desc ap_io_desc[] __initdata = { static void __init ap_map_io(void) { iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc)); + vga_base = PCI_MEMORY_VADDR; } #define INTEGRATOR_SC_VALID_INT 0x003fffff @@ -337,15 +339,15 @@ static unsigned long timer_reload; static void integrator_clocksource_init(u32 khz) { void __iomem *base = (void __iomem *)TIMER2_VA_BASE; - u32 ctrl = TIMER_CTRL_ENABLE; + u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC; if (khz >= 1500) { khz /= 16; - ctrl = TIMER_CTRL_DIV16; + ctrl |= TIMER_CTRL_DIV16; } - writel(ctrl, base + TIMER_CTRL); writel(0xffff, base + TIMER_LOAD); + writel(ctrl, base + TIMER_CTRL); clocksource_mmio_init(base + TIMER_VALUE, "timer2", khz * 1000, 200, 16, clocksource_mmio_readl_down); diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index dd56bfb351e3..11b86e5b71c2 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -27,7 +27,6 @@ #include <linux/spinlock.h> #include <linux/init.h> #include <linux/io.h> -#include <video/vga.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -505,7 +504,6 @@ void __init pci_v3_preinit(void) pcibios_min_io = 0x6000; pcibios_min_mem = 0x00100000; - vga_base = PCI_MEMORY_VADDR; /* * Hook in our fault handler for PCI errors diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index c070c24255f4..98e25d9aaab6 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -16,16 +16,18 @@ #include <mach/gpio.h> #include <mach/pxa168.h> #include <mach/mfp-pxa168.h> -#include <mach/mfp-gplugd.h> #include "common.h" static unsigned long gplugd_pin_config[] __initdata = { /* UART3 */ - GPIO8_UART3_SOUT, - GPIO9_UART3_SIN, - GPI1O_UART3_CTS, - GPI11_UART3_RTS, + GPIO8_UART3_TXD, + GPIO9_UART3_RXD, + GPIO1O_UART3_CTS, + GPIO11_UART3_RTS, + + /* USB OTG PEN */ + GPIO18_GPIO, /* MMC2 */ GPIO28_MMC2_CMD, @@ -109,6 +111,12 @@ static unsigned long gplugd_pin_config[] __initdata = { GPIO105_CI2C_SDA, GPIO106_CI2C_SCL, + /* SPI NOR Flash on SSP2 */ + GPIO107_SSP2_RXD, + GPIO108_SSP2_TXD, + GPIO110_GPIO, /* SPI_CSn */ + GPIO111_SSP2_CLK, + /* Select JTAG */ GPIO109_GPIO, @@ -154,7 +162,7 @@ static void __init select_disp_freq(void) "frequency\n"); } else { gpio_direction_output(35, 1); - gpio_free(104); + gpio_free(35); } if (unlikely(gpio_request(85, "DISP_FREQ_SEL_2"))) { @@ -162,7 +170,7 @@ static void __init select_disp_freq(void) "frequency\n"); } else { gpio_direction_output(85, 0); - gpio_free(104); + gpio_free(85); } } diff --git a/arch/arm/mach-mmp/include/mach/mfp-gplugd.h b/arch/arm/mach-mmp/include/mach/mfp-gplugd.h deleted file mode 100644 index b8cf38d85600..000000000000 --- a/arch/arm/mach-mmp/include/mach/mfp-gplugd.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * linux/arch/arm/mach-mmp/include/mach/mfp-gplugd.h - * - * MFP definitions used in gplugD - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_MFP_GPLUGD_H -#define __MACH_MFP_GPLUGD_H - -#include <plat/mfp.h> -#include <mach/mfp.h> - -/* UART3 */ -#define GPIO8_UART3_SOUT MFP_CFG(GPIO8, AF2) -#define GPIO9_UART3_SIN MFP_CFG(GPIO9, AF2) -#define GPI1O_UART3_CTS MFP_CFG(GPIO10, AF2) -#define GPI11_UART3_RTS MFP_CFG(GPIO11, AF2) - -/* MMC2 */ -#define GPIO28_MMC2_CMD MFP_CFG_DRV(GPIO28, AF6, FAST) -#define GPIO29_MMC2_CLK MFP_CFG_DRV(GPIO29, AF6, FAST) -#define GPIO30_MMC2_DAT0 MFP_CFG_DRV(GPIO30, AF6, FAST) -#define GPIO31_MMC2_DAT1 MFP_CFG_DRV(GPIO31, AF6, FAST) -#define GPIO32_MMC2_DAT2 MFP_CFG_DRV(GPIO32, AF6, FAST) -#define GPIO33_MMC2_DAT3 MFP_CFG_DRV(GPIO33, AF6, FAST) - -/* I2S */ -#undef GPIO114_I2S_FRM -#undef GPIO115_I2S_BCLK - -#define GPIO114_I2S_FRM MFP_CFG_DRV(GPIO114, AF1, FAST) -#define GPIO115_I2S_BCLK MFP_CFG_DRV(GPIO115, AF1, FAST) -#define GPIO116_I2S_TXD MFP_CFG_DRV(GPIO116, AF1, FAST) - -/* MMC4 */ -#define GPIO125_MMC4_DAT3 MFP_CFG_DRV(GPIO125, AF7, FAST) -#define GPIO126_MMC4_DAT2 MFP_CFG_DRV(GPIO126, AF7, FAST) -#define GPIO127_MMC4_DAT1 MFP_CFG_DRV(GPIO127, AF7, FAST) -#define GPIO0_2_MMC4_DAT0 MFP_CFG_DRV(GPIO0_2, AF7, FAST) -#define GPIO1_2_MMC4_CMD MFP_CFG_DRV(GPIO1_2, AF7, FAST) -#define GPIO2_2_MMC4_CLK MFP_CFG_DRV(GPIO2_2, AF7, FAST) - -/* OTG GPIO */ -#define GPIO_USB_OTG_PEN 18 -#define GPIO_USB_OIDIR 20 - -/* Other GPIOs are 35, 84, 85 */ -#endif /* __MACH_MFP_GPLUGD_H */ diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h index 8c782328b21c..92aaa3c19d61 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h @@ -203,6 +203,10 @@ #define GPIO33_CF_nCD2 MFP_CFG(GPIO33, AF3) /* UART */ +#define GPIO8_UART3_TXD MFP_CFG(GPIO8, AF2) +#define GPIO9_UART3_RXD MFP_CFG(GPIO9, AF2) +#define GPIO1O_UART3_CTS MFP_CFG(GPIO10, AF2) +#define GPIO11_UART3_RTS MFP_CFG(GPIO11, AF2) #define GPIO88_UART2_TXD MFP_CFG(GPIO88, AF2) #define GPIO89_UART2_RXD MFP_CFG(GPIO89, AF2) #define GPIO107_UART1_TXD MFP_CFG_DRV(GPIO107, AF1, FAST) @@ -232,6 +236,22 @@ #define GPIO53_MMC1_CD MFP_CFG(GPIO53, AF1) #define GPIO46_MMC1_WP MFP_CFG(GPIO46, AF1) +/* MMC2 */ +#define GPIO28_MMC2_CMD MFP_CFG_DRV(GPIO28, AF6, FAST) +#define GPIO29_MMC2_CLK MFP_CFG_DRV(GPIO29, AF6, FAST) +#define GPIO30_MMC2_DAT0 MFP_CFG_DRV(GPIO30, AF6, FAST) +#define GPIO31_MMC2_DAT1 MFP_CFG_DRV(GPIO31, AF6, FAST) +#define GPIO32_MMC2_DAT2 MFP_CFG_DRV(GPIO32, AF6, FAST) +#define GPIO33_MMC2_DAT3 MFP_CFG_DRV(GPIO33, AF6, FAST) + +/* MMC4 */ +#define GPIO125_MMC4_DAT3 MFP_CFG_DRV(GPIO125, AF7, FAST) +#define GPIO126_MMC4_DAT2 MFP_CFG_DRV(GPIO126, AF7, FAST) +#define GPIO127_MMC4_DAT1 MFP_CFG_DRV(GPIO127, AF7, FAST) +#define GPIO0_2_MMC4_DAT0 MFP_CFG_DRV(GPIO0_2, AF7, FAST) +#define GPIO1_2_MMC4_CMD MFP_CFG_DRV(GPIO1_2, AF7, FAST) +#define GPIO2_2_MMC4_CLK MFP_CFG_DRV(GPIO2_2, AF7, FAST) + /* LCD */ #define GPIO84_LCD_CS MFP_CFG(GPIO84, AF1) #define GPIO60_LCD_DD0 MFP_CFG(GPIO60, AF1) @@ -269,11 +289,12 @@ #define GPIO106_CI2C_SCL MFP_CFG(GPIO106, AF1) /* I2S */ -#define GPIO113_I2S_MCLK MFP_CFG(GPIO113,AF6) -#define GPIO114_I2S_FRM MFP_CFG(GPIO114,AF1) -#define GPIO115_I2S_BCLK MFP_CFG(GPIO115,AF1) -#define GPIO116_I2S_RXD MFP_CFG(GPIO116,AF2) -#define GPIO117_I2S_TXD MFP_CFG(GPIO117,AF2) +#define GPIO113_I2S_MCLK MFP_CFG(GPIO113, AF6) +#define GPIO114_I2S_FRM MFP_CFG(GPIO114, AF1) +#define GPIO115_I2S_BCLK MFP_CFG(GPIO115, AF1) +#define GPIO116_I2S_RXD MFP_CFG(GPIO116, AF2) +#define GPIO116_I2S_TXD MFP_CFG(GPIO116, AF1) +#define GPIO117_I2S_TXD MFP_CFG(GPIO117, AF2) /* PWM */ #define GPIO96_PWM3_OUT MFP_CFG(GPIO96, AF1) @@ -324,4 +345,10 @@ #define GPIO101_MII_MDIO MFP_CFG(GPIO101, AF5) #define GPIO103_RX_DV MFP_CFG(GPIO103, AF5) +/* SSP2 */ +#define GPIO107_SSP2_RXD MFP_CFG(GPIO107, AF4) +#define GPIO108_SSP2_TXD MFP_CFG(GPIO108, AF4) +#define GPIO111_SSP2_CLK MFP_CFG(GPIO111, AF4) +#define GPIO112_SSP2_FRM MFP_CFG(GPIO112, AF4) + #endif /* __ASM_MACH_MFP_PXA168_H */ diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index 99833b9485cf..4e91ee6e27c8 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -51,12 +51,12 @@ static inline uint32_t timer_read(void) { int delay = 100; - __raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(0)); + __raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(1)); while (delay--) cpu_relax(); - return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(0)); + return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(1)); } unsigned long long notrace sched_clock(void) @@ -75,28 +75,51 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) { struct clock_event_device *c = dev_id; - /* disable and clear pending interrupt status */ - __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0)); - __raw_writel(0x1, TIMERS_VIRT_BASE + TMR_ICR(0)); + /* + * Clear pending interrupt status. + */ + __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0)); + + /* + * Disable timer 0. + */ + __raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER); + c->event_handler(c); + return IRQ_HANDLED; } static int timer_set_next_event(unsigned long delta, struct clock_event_device *dev) { - unsigned long flags, next; + unsigned long flags; local_irq_save(flags); - /* clear pending interrupt status and enable */ + /* + * Disable timer 0. + */ + __raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER); + + /* + * Clear and enable timer match 0 interrupt. + */ __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0)); __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_IER(0)); - next = timer_read() + delta; - __raw_writel(next, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0)); + /* + * Setup new clockevent timer value. + */ + __raw_writel(delta - 1, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0)); + + /* + * Enable timer 0. + */ + __raw_writel(0x03, TIMERS_VIRT_BASE + TMR_CER); local_irq_restore(flags); + return 0; } @@ -145,23 +168,26 @@ static struct clocksource cksrc = { static void __init timer_config(void) { uint32_t ccr = __raw_readl(TIMERS_VIRT_BASE + TMR_CCR); - uint32_t cer = __raw_readl(TIMERS_VIRT_BASE + TMR_CER); - uint32_t cmr = __raw_readl(TIMERS_VIRT_BASE + TMR_CMR); - __raw_writel(cer & ~0x1, TIMERS_VIRT_BASE + TMR_CER); /* disable */ + __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_CER); /* disable */ - ccr &= (cpu_is_mmp2()) ? TMR_CCR_CS_0(0) : TMR_CCR_CS_0(3); + ccr &= (cpu_is_mmp2()) ? (TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) : + (TMR_CCR_CS_0(3) | TMR_CCR_CS_1(3)); __raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR); - /* free-running mode */ - __raw_writel(cmr | 0x01, TIMERS_VIRT_BASE + TMR_CMR); + /* set timer 0 to periodic mode, and timer 1 to free-running mode */ + __raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CMR); - __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* free-running */ + __raw_writel(0x1, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* periodic */ __raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(0)); /* clear status */ __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0)); - /* enable timer counter */ - __raw_writel(cer | 0x01, TIMERS_VIRT_BASE + TMR_CER); + __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(1)); /* free-running */ + __raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(1)); /* clear status */ + __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(1)); + + /* enable timer 1 counter */ + __raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CER); } static struct irqaction timer_irq = { diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index b7a84966b711..d1e4cc83b1e6 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -24,6 +24,7 @@ #include <linux/smsc911x.h> #include <linux/usb/msm_hsusb.h> #include <linux/clkdev.h> +#include <linux/memblock.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -42,6 +43,21 @@ extern struct sys_timer msm_timer; +static void __init msm7x30_fixup(struct machine_desc *desc, struct tag *tag, + char **cmdline, struct meminfo *mi) +{ + for (; tag->hdr.size; tag = tag_next(tag)) + if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) { + tag->u.mem.start = 0; + tag->u.mem.size += SZ_2M; + } +} + +static void __init msm7x30_reserve(void) +{ + memblock_remove(0x0, SZ_2M); +} + static int hsusb_phy_init_seq[] = { 0x30, 0x32, /* Enable and set Pre-Emphasis Depth to 20% */ 0x02, 0x36, /* Disable CDR Auto Reset feature */ @@ -107,6 +123,8 @@ static void __init msm7x30_map_io(void) MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF") .boot_params = PLAT_PHYS_OFFSET + 0x100, + .fixup = msm7x30_fixup, + .reserve = msm7x30_reserve, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, @@ -115,6 +133,8 @@ MACHINE_END MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") .boot_params = PLAT_PHYS_OFFSET + 0x100, + .fixup = msm7x30_fixup, + .reserve = msm7x30_reserve, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, @@ -123,6 +143,8 @@ MACHINE_END MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID") .boot_params = PLAT_PHYS_OFFSET + 0x100, + .fixup = msm7x30_fixup, + .reserve = msm7x30_reserve, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c index 35c7ceeb3f29..b04468e7d00e 100644 --- a/arch/arm/mach-msm/board-msm8960.c +++ b/arch/arm/mach-msm/board-msm8960.c @@ -20,16 +20,34 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/clkdev.h> +#include <linux/memblock.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> +#include <asm/setup.h> #include <mach/board.h> #include <mach/msm_iomap.h> #include "devices.h" +static void __init msm8960_fixup(struct machine_desc *desc, struct tag *tag, + char **cmdline, struct meminfo *mi) +{ + for (; tag->hdr.size; tag = tag_next(tag)) + if (tag->hdr.tag == ATAG_MEM && + tag->u.mem.start == 0x40200000) { + tag->u.mem.start = 0x40000000; + tag->u.mem.size += SZ_2M; + } +} + +static void __init msm8960_reserve(void) +{ + memblock_remove(0x40000000, SZ_2M); +} + static void __init msm8960_map_io(void) { msm_map_msm8960_io(); @@ -76,6 +94,8 @@ static void __init msm8960_rumi3_init(void) } MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR") + .fixup = msm8960_fixup, + .reserve = msm8960_reserve, .map_io = msm8960_map_io, .init_irq = msm8960_init_irq, .timer = &msm_timer, @@ -83,6 +103,8 @@ MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR") MACHINE_END MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3") + .fixup = msm8960_fixup, + .reserve = msm8960_reserve, .map_io = msm8960_map_io, .init_irq = msm8960_init_irq, .timer = &msm_timer, diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index 1163b6fd05d2..9221f54778be 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -20,14 +20,31 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/memblock.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> +#include <asm/setup.h> #include <mach/board.h> #include <mach/msm_iomap.h> +static void __init msm8x60_fixup(struct machine_desc *desc, struct tag *tag, + char **cmdline, struct meminfo *mi) +{ + for (; tag->hdr.size; tag = tag_next(tag)) + if (tag->hdr.tag == ATAG_MEM && + tag->u.mem.start == 0x40200000) { + tag->u.mem.start = 0x40000000; + tag->u.mem.size += SZ_2M; + } +} + +static void __init msm8x60_reserve(void) +{ + memblock_remove(0x40000000, SZ_2M); +} static void __init msm8x60_map_io(void) { @@ -65,6 +82,8 @@ static void __init msm8x60_init(void) } MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3") + .fixup = msm8x60_fixup, + .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, .init_machine = msm8x60_init, @@ -72,6 +91,8 @@ MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3") MACHINE_END MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF") + .fixup = msm8x60_fixup, + .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, .init_machine = msm8x60_init, @@ -79,6 +100,8 @@ MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF") MACHINE_END MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR") + .fixup = msm8x60_fixup, + .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, .init_machine = msm8x60_init, @@ -86,6 +109,8 @@ MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR") MACHINE_END MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA") + .fixup = msm8x60_fixup, + .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, .init_machine = msm8x60_init, diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h index f2f8d299ba95..58d5e7eec431 100644 --- a/arch/arm/mach-msm/include/mach/memory.h +++ b/arch/arm/mach-msm/include/mach/memory.h @@ -22,11 +22,11 @@ #elif defined(CONFIG_ARCH_QSD8X50) #define PLAT_PHYS_OFFSET UL(0x20000000) #elif defined(CONFIG_ARCH_MSM7X30) -#define PLAT_PHYS_OFFSET UL(0x00200000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #elif defined(CONFIG_ARCH_MSM8X60) -#define PLAT_PHYS_OFFSET UL(0x40200000) +#define PLAT_PHYS_OFFSET UL(0x40000000) #elif defined(CONFIG_ARCH_MSM8960) -#define PLAT_PHYS_OFFSET UL(0x40200000) +#define PLAT_PHYS_OFFSET UL(0x40000000) #else #define PLAT_PHYS_OFFSET UL(0x10000000) #endif diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index 1a1af9e56250..727659520912 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -156,6 +156,12 @@ void __init smp_init_cpus(void) { unsigned int i, ncores = get_core_count(); + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; + } + for (i = 0; i < ncores; i++) set_cpu_possible(i, true); diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index 7c893fa70266..68934ea8725a 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000), - .irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO), + .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO), .irqflags = IRQF_TRIGGER_HIGH, .uartclk = CPUIMX51_QUART_XTAL, .regshift = CPUIMX51_QUART_REGSHIFT, diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index e400b09109ce..11b0ff67f89d 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -369,7 +369,7 @@ static void __init mx51_babbage_init(void) ARRAY_SIZE(mx51babbage_pads)); imx51_add_imx_uart(0, &uart_pdata); - imx51_add_imx_uart(1, &uart_pdata); + imx51_add_imx_uart(1, NULL); imx51_add_imx_uart(2, &uart_pdata); babbage_fec_reset(); diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index f70700dc0ec1..551daf85ff8c 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -108,9 +108,9 @@ static void __init mx51_efikamx_board_id(void) gpio_request(EFIKAMX_PCBID2, "pcbid2"); gpio_direction_input(EFIKAMX_PCBID2); - id = gpio_get_value(EFIKAMX_PCBID0); - id |= gpio_get_value(EFIKAMX_PCBID1) << 1; - id |= gpio_get_value(EFIKAMX_PCBID2) << 2; + id = gpio_get_value(EFIKAMX_PCBID0) ? 1 : 0; + id |= (gpio_get_value(EFIKAMX_PCBID1) ? 1 : 0) << 1; + id |= (gpio_get_value(EFIKAMX_PCBID2) ? 1 : 0) << 2; switch (id) { case 7: diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c index 2e4d9d32a87c..8a9bca22beb5 100644 --- a/arch/arm/mach-mx5/board-mx51_efikasb.c +++ b/arch/arm/mach-mx5/board-mx51_efikasb.c @@ -156,23 +156,24 @@ static struct gpio_keys_button mx51_efikasb_keys[] = { { .code = KEY_POWER, .gpio = EFIKASB_PWRKEY, - .type = EV_PWR, + .type = EV_KEY, .desc = "Power Button", .wakeup = 1, - .debounce_interval = 10, /* ms */ + .active_low = 1, }, { .code = SW_LID, .gpio = EFIKASB_LID, .type = EV_SW, .desc = "Lid Switch", + .active_low = 1, }, { - /* SW_RFKILLALL vs KEY_RFKILL ? */ - .code = SW_RFKILL_ALL, + .code = KEY_RFKILL, .gpio = EFIKASB_RFKILL, - .type = EV_SW, + .type = EV_KEY, .desc = "rfkill", + .active_low = 1, }, }; @@ -224,8 +225,8 @@ static void __init mx51_efikasb_board_id(void) gpio_request(EFIKASB_PCBID1, "pcb id1"); gpio_direction_input(EFIKASB_PCBID1); - id = gpio_get_value(EFIKASB_PCBID0); - id |= gpio_get_value(EFIKASB_PCBID1) << 1; + id = gpio_get_value(EFIKASB_PCBID0) ? 1 : 0; + id |= (gpio_get_value(EFIKASB_PCBID1) ? 1 : 0) << 1; switch (id) { default: diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c index 7f20308c4dbd..f7bf996f463b 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c @@ -271,7 +271,11 @@ static int _clk_pll_enable(struct clk *clk) int i = 0; pllbase = _get_pll_base(clk); - reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN; + reg = __raw_readl(pllbase + MXC_PLL_DP_CTL); + if (reg & MXC_PLL_DP_CTL_UPEN) + return 0; + + reg |= MXC_PLL_DP_CTL_UPEN; __raw_writel(reg, pllbase + MXC_PLL_DP_CTL); /* Wait for lock */ diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c index 4435e03cea5d..c9209454807a 100644 --- a/arch/arm/mach-mx5/mx51_efika.c +++ b/arch/arm/mach-mx5/mx51_efika.c @@ -186,7 +186,7 @@ static int initialize_usbh1_port(struct platform_device *pdev) mdelay(10); - return mx51_initialize_usb_hw(0, MXC_EHCI_ITC_NO_THRESHOLD); + return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD); } static struct mxc_usbh_platform_data usbh1_config = { diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 4ae6257b39a4..89bfb49389f2 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -7,7 +7,6 @@ config ARCH_OMAP2PLUS_TYPICAL default y select AEABI select REGULATOR - select PM select PM_RUNTIME select VFP select NEON if ARCH_OMAP3 || ARCH_OMAP4 @@ -37,6 +36,7 @@ config ARCH_OMAP3 select ARM_L1_CACHE_SHIFT_6 if !ARCH_OMAP4 select ARCH_HAS_OPP select PM_OPP if PM + select ARM_CPU_SUSPEND if PM config ARCH_OMAP4 bool "TI OMAP4" @@ -51,6 +51,7 @@ config ARCH_OMAP4 select ARCH_HAS_OPP select PM_OPP if PM select USB_ARCH_HAS_EHCI + select ARM_CPU_SUSPEND if PM comment "OMAP Core Type" depends on ARCH_OMAP2 diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 2028464cf5b9..f79b7d2a8ed4 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -193,7 +193,8 @@ static int __init omap2430_i2c_init(void) { omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo, ARRAY_SIZE(sdp2430_i2c1_boardinfo)); - omap2_pmic_init("twl4030", &sdp2430_twldata); + omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ, + &sdp2430_twldata); return 0; } diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 5f2b55ff04ff..933e9353cb37 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -45,8 +45,6 @@ static struct omap_board_config_kernel am3517_crane_config[] __initdata = { static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; -#else -#define board_mux NULL #endif static void __init am3517_crane_init_early(void) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 32f5f895568a..3ae16b4e3f52 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -491,23 +491,22 @@ static void __init beagle_opp_init(void) /* Custom OPP enabled for all xM versions */ if (cpu_is_omap3630()) { - struct omap_hwmod *mh = omap_hwmod_lookup("mpu"); - struct omap_hwmod *dh = omap_hwmod_lookup("iva"); - struct device *dev; + struct device *mpu_dev, *iva_dev; - if (!mh || !dh) { + mpu_dev = omap2_get_mpuss_device(); + iva_dev = omap2_get_iva_device(); + + if (!mpu_dev || !iva_dev) { pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n", - __func__, mh, dh); + __func__, mpu_dev, iva_dev); return; } /* Enable MPU 1GHz and lower opps */ - dev = &mh->od->pdev.dev; - r = opp_enable(dev, 800000000); + r = opp_enable(mpu_dev, 800000000); /* TODO: MPU 1GHz needs SR and ABB */ /* Enable IVA 800MHz and lower opps */ - dev = &dh->od->pdev.dev; - r |= opp_enable(dev, 660000000); + r |= opp_enable(iva_dev, 660000000); /* TODO: DSP 800MHz needs SR and ABB */ if (r) { pr_err("%s: failed to enable higher opp %d\n", @@ -516,10 +515,8 @@ static void __init beagle_opp_init(void) * Cleanup - disable the higher freqs - we dont care * about the results */ - dev = &mh->od->pdev.dev; - opp_disable(dev, 800000000); - dev = &dh->od->pdev.dev; - opp_disable(dev, 660000000); + opp_disable(mpu_dev, 800000000); + opp_disable(iva_dev, 660000000); } } return; diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index ffd55b1c4396..b9b844683147 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3078,6 +3078,7 @@ static struct clk gpt12_fck = { .name = "gpt12_fck", .ops = &clkops_null, .parent = &secure_32k_fck, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -3085,6 +3086,7 @@ static struct clk wdt1_fck = { .name = "wdt1_fck", .ops = &clkops_null, .parent = &secure_32k_fck, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 2af0e3f00ce1..c0b6fbda3408 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3376,10 +3376,18 @@ int __init omap4xxx_clk_init(void) } else if (cpu_is_omap446x()) { cpu_mask = RATE_IN_4460; cpu_clkflg = CK_446X; + } else { + return 0; } clk_init(&omap2_clk_functions); - omap2_clk_disable_clkdm_control(); + + /* + * Must stay commented until all OMAP SoC drivers are + * converted to runtime PM, or drivers may start crashing + * + * omap2_clk_disable_clkdm_control(); + */ for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks); c++) diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index ab7db083f97f..8f0890685d7b 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -747,6 +747,7 @@ int clkdm_wakeup(struct clockdomain *clkdm) spin_lock_irqsave(&clkdm->lock, flags); clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED; ret = arch_clkdm->clkdm_wakeup(clkdm); + ret |= pwrdm_state_switch(clkdm->pwrdm.ptr); spin_unlock_irqrestore(&clkdm->lock, flags); return ret; } @@ -818,6 +819,7 @@ void clkdm_deny_idle(struct clockdomain *clkdm) spin_lock_irqsave(&clkdm->lock, flags); clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED; arch_clkdm->clkdm_deny_idle(clkdm); + pwrdm_state_switch(clkdm->pwrdm.ptr); spin_unlock_irqrestore(&clkdm->lock, flags); } diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h index f2ea6453ade0..a018a7327879 100644 --- a/arch/arm/mach-omap2/cminst44xx.h +++ b/arch/arm/mach-omap2/cminst44xx.h @@ -18,13 +18,36 @@ extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs); extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs); extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); -extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); + +# ifdef CONFIG_ARCH_OMAP4 +extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs); extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); +# else + +static inline int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ + return 0; +} + +static inline void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, + s16 cdoffs, u16 clkctrl_offs) +{ +} + +static inline void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ +} + +# endif + /* * In an ideal world, we would not export these low-level functions, * but this will probably take some time to fix properly diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index a9b45c76e1d3..097a42d81e59 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -137,8 +137,7 @@ static void omap4_hsmmc1_before_set_reg(struct device *dev, int slot, */ reg = omap4_ctrl_pad_readl(control_pbias_offset); reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | - OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } @@ -156,8 +155,7 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, else reg |= OMAP4_MMC1_PBIASLITE_VMODE_MASK; reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | - OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); timeout = jiffies + msecs_to_jiffies(5); @@ -171,16 +169,14 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) { pr_err("Pbias Voltage is not same as LDO\n"); /* Caution : On VMODE_ERROR Power Down MMC IO */ - reg &= ~(OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + reg &= ~(OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } } else { reg = omap4_ctrl_pad_readl(control_pbias_offset); reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_MMC1_PBIASLITE_VMODE_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + OMAP4_MMC1_PBIASLITE_VMODE_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } } diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index c7fb22abc219..655e9480eb98 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -821,11 +821,10 @@ static void __init omap_mux_set_cmdline_signals(void) if (!omap_mux_options) return; - options = kmalloc(strlen(omap_mux_options) + 1, GFP_KERNEL); + options = kstrdup(omap_mux_options, GFP_KERNEL); if (!options) return; - strcpy(options, omap_mux_options); next_opt = options; while ((token = strsep(&next_opt, ",")) != NULL) { @@ -855,24 +854,19 @@ static int __init omap_mux_copy_names(struct omap_mux *src, for (i = 0; i < OMAP_MUX_NR_MODES; i++) { if (src->muxnames[i]) { - dst->muxnames[i] = - kmalloc(strlen(src->muxnames[i]) + 1, - GFP_KERNEL); + dst->muxnames[i] = kstrdup(src->muxnames[i], + GFP_KERNEL); if (!dst->muxnames[i]) goto free; - strcpy(dst->muxnames[i], src->muxnames[i]); } } #ifdef CONFIG_DEBUG_FS for (i = 0; i < OMAP_MUX_NR_SIDES; i++) { if (src->balls[i]) { - dst->balls[i] = - kmalloc(strlen(src->balls[i]) + 1, - GFP_KERNEL); + dst->balls[i] = kstrdup(src->balls[i], GFP_KERNEL); if (!dst->balls[i]) goto free; - strcpy(dst->balls[i], src->balls[i]); } } #endif diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index ce65e9329c7b..889464dc7b2d 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -109,12 +109,10 @@ void __init smp_init_cpus(void) ncores = scu_get_core_count(scu_base); /* sanity check */ - if (ncores > NR_CPUS) { - printk(KERN_WARNING - "OMAP4: no. of cores (%d) greater than configured " - "maximum of %d - clipping\n", - ncores, NR_CPUS); - ncores = NR_CPUS; + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; } for (i = 0; i < ncores; i++) diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 16743c7d6e8e..408193d8e044 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -192,6 +192,7 @@ static struct omap_hwmod_addr_space omap2430_usbhsotg_addrs[] = { .pa_end = OMAP243X_HS_BASE + SZ_4K - 1, .flags = ADDR_TYPE_RT }, + { } }; /* l4_core ->usbhsotg interface */ diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 3feb35911a32..472bf22d5e84 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -130,7 +130,6 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) } else { hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]); clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); - pwrdm_wait_transition(pwrdm); sleep_switch = FORCEWAKEUP_SWITCH; } } @@ -156,7 +155,6 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) return ret; } - pwrdm_wait_transition(pwrdm); pwrdm_state_switch(pwrdm); err: return ret; diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 9af08473bf10..ef71fdd40fc4 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -195,28 +195,35 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused) /** * pwrdm_init - set up the powerdomain layer - * @pwrdm_list: array of struct powerdomain pointers to register + * @pwrdms: array of struct powerdomain pointers to register * @custom_funcs: func pointers for arch specific implementations * - * Loop through the array of powerdomains @pwrdm_list, registering all - * that are available on the current CPU. If pwrdm_list is supplied - * and not null, all of the referenced powerdomains will be - * registered. No return value. XXX pwrdm_list is not really a - * "list"; it is an array. Rename appropriately. + * Loop through the array of powerdomains @pwrdms, registering all + * that are available on the current CPU. Also, program all + * powerdomain target state as ON; this is to prevent domains from + * hitting low power states (if bootloader has target states set to + * something other than ON) and potentially even losing context while + * PM is not fully initialized. The PM late init code can then program + * the desired target state for all the power domains. No return + * value. */ -void pwrdm_init(struct powerdomain **pwrdm_list, struct pwrdm_ops *custom_funcs) +void pwrdm_init(struct powerdomain **pwrdms, struct pwrdm_ops *custom_funcs) { struct powerdomain **p = NULL; + struct powerdomain *temp_p; if (!custom_funcs) WARN(1, "powerdomain: No custom pwrdm functions registered\n"); else arch_pwrdm = custom_funcs; - if (pwrdm_list) { - for (p = pwrdm_list; *p; p++) + if (pwrdms) { + for (p = pwrdms; *p; p++) _pwrdm_register(*p); } + + list_for_each_entry(temp_p, &pwrdm_list, node) + pwrdm_set_next_pwrst(temp_p, PWRDM_POWER_ON); } /** diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 2ce2fb7664bc..34c01a7de810 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -621,7 +621,7 @@ void sr_disable(struct voltagedomain *voltdm) sr_v2_disable(sr); } - pm_runtime_put_sync(&sr->pdev->dev); + pm_runtime_put_sync_suspend(&sr->pdev->dev); } /** @@ -860,6 +860,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); pm_runtime_enable(&pdev->dev); + pm_runtime_irq_safe(&pdev->dev); sr_info->pdev = pdev; sr_info->srid = pdev->id; diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index e9640728239b..cf1de7d2630d 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -293,7 +293,8 @@ static void __init omap2_gp_clocksource_init(int gptimer_id, pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n", gptimer_id, clksrc.rate); - __omap_dm_timer_load_start(clksrc.io_base, OMAP_TIMER_CTRL_ST, 0, 1); + __omap_dm_timer_load_start(clksrc.io_base, + OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1); init_sched_clock(&cd, dmtimer_update_sched_clock, 32, clksrc.rate); if (clocksource_register_hz(&clocksource_gpt, clksrc.rate)) diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 2543342dbccb..daa056ed8738 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -48,14 +48,7 @@ void __init omap_pmic_init(int bus, u32 clkrate, omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); } -static struct twl4030_usb_data omap4_usb_pdata = { - .phy_init = omap4430_phy_init, - .phy_exit = omap4430_phy_exit, - .phy_power = omap4430_phy_power, - .phy_set_clock = omap4430_phy_set_clk, - .phy_suspend = omap4430_phy_suspend, -}; - +#if defined(CONFIG_ARCH_OMAP3) static struct twl4030_usb_data omap3_usb_pdata = { .usb_mode = T2_USB_MODE_ULPI, }; @@ -122,6 +115,45 @@ static struct regulator_init_data omap3_vpll2_idata = { .consumer_supplies = omap3_vpll2_supplies, }; +void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, + u32 pdata_flags, u32 regulators_flags) +{ + if (!pmic_data->irq_base) + pmic_data->irq_base = TWL4030_IRQ_BASE; + if (!pmic_data->irq_end) + pmic_data->irq_end = TWL4030_IRQ_END; + + /* Common platform data configurations */ + if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb) + pmic_data->usb = &omap3_usb_pdata; + + if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci) + pmic_data->bci = &omap3_bci_pdata; + + if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc) + pmic_data->madc = &omap3_madc_pdata; + + if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->audio) + pmic_data->audio = &omap3_audio_pdata; + + /* Common regulator configurations */ + if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac) + pmic_data->vdac = &omap3_vdac_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2) + pmic_data->vpll2 = &omap3_vpll2_idata; +} +#endif /* CONFIG_ARCH_OMAP3 */ + +#if defined(CONFIG_ARCH_OMAP4) +static struct twl4030_usb_data omap4_usb_pdata = { + .phy_init = omap4430_phy_init, + .phy_exit = omap4430_phy_exit, + .phy_power = omap4430_phy_power, + .phy_set_clock = omap4430_phy_set_clk, + .phy_suspend = omap4430_phy_suspend, +}; + static struct regulator_init_data omap4_vdac_idata = { .constraints = { .min_uV = 1800000, @@ -273,32 +305,4 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, !pmic_data->clk32kg) pmic_data->clk32kg = &omap4_clk32kg_idata; } - -void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, - u32 pdata_flags, u32 regulators_flags) -{ - if (!pmic_data->irq_base) - pmic_data->irq_base = TWL4030_IRQ_BASE; - if (!pmic_data->irq_end) - pmic_data->irq_end = TWL4030_IRQ_END; - - /* Common platform data configurations */ - if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb) - pmic_data->usb = &omap3_usb_pdata; - - if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci) - pmic_data->bci = &omap3_bci_pdata; - - if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc) - pmic_data->madc = &omap3_madc_pdata; - - if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->audio) - pmic_data->audio = &omap3_audio_pdata; - - /* Common regulator configurations */ - if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac) - pmic_data->vdac = &omap3_vdac_idata; - - if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2) - pmic_data->vpll2 = &omap3_vpll2_idata; -} +#endif /* CONFIG_ARCH_OMAP4 */ diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index a65145b02a55..19e4dac62a8c 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -137,9 +137,6 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) musb_plat.mode = board_data->mode; musb_plat.extvbus = board_data->extvbus; - if (cpu_is_omap44xx()) - omap4430_phy_init(dev); - if (cpu_is_omap3517() || cpu_is_omap3505()) { oh_name = "am35x_otg_hs"; name = "musb-am35x"; diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index a6eddae82a0b..c105556a0ee1 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -77,7 +77,7 @@ static int __init dns323_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) /* * Check for devices with hard-wired IRQs. */ - irq = orion5x_pci_map_irq(const dev, slot, pin); + irq = orion5x_pci_map_irq(dev, slot, pin); if (irq != -1) return irq; diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index 28b8760ab9fa..bc4a920e26ee 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -14,6 +14,7 @@ #include <linux/pci.h> #include <linux/slab.h> #include <linux/mbus.h> +#include <video/vga.h> #include <asm/irq.h> #include <asm/mach/pci.h> #include <plat/pcie.h> diff --git a/arch/arm/mach-prima2/clock.c b/arch/arm/mach-prima2/clock.c index f9a2aaf63f71..615a4e75ceab 100644 --- a/arch/arm/mach-prima2/clock.c +++ b/arch/arm/mach-prima2/clock.c @@ -481,6 +481,7 @@ static void __init sirfsoc_clk_init(void) static struct of_device_id clkc_ids[] = { { .compatible = "sirf,prima2-clkc" }, + {}, }; void __init sirfsoc_of_clk_init(void) diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c index c3404cbb6ff7..7af254d046ba 100644 --- a/arch/arm/mach-prima2/irq.c +++ b/arch/arm/mach-prima2/irq.c @@ -51,6 +51,7 @@ static __init void sirfsoc_irq_init(void) static struct of_device_id intc_ids[] = { { .compatible = "sirf,prima2-intc" }, + {}, }; void __init sirfsoc_of_irq_init(void) diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c index d074786e83d4..492cfa8d2610 100644 --- a/arch/arm/mach-prima2/rstc.c +++ b/arch/arm/mach-prima2/rstc.c @@ -19,6 +19,7 @@ static DEFINE_MUTEX(rstc_lock); static struct of_device_id rstc_ids[] = { { .compatible = "sirf,prima2-rstc" }, + {}, }; static int __init sirfsoc_of_rstc_init(void) diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c index 44027f34a88a..ed7ec48d11da 100644 --- a/arch/arm/mach-prima2/timer.c +++ b/arch/arm/mach-prima2/timer.c @@ -190,6 +190,7 @@ static void __init sirfsoc_timer_init(void) static struct of_device_id timer_ids[] = { { .compatible = "sirf,prima2-tick" }, + {}, }; static void __init sirfsoc_of_timer_map(void) diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index b09e848eb6c6..ca6075717824 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -19,6 +19,8 @@ #include <linux/io.h> #include <linux/irq.h> +#include <asm/exception.h> + #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/gpio.h> diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h index a30f2e3ec178..6657ff231161 100644 --- a/arch/arm/mach-realview/include/mach/system.h +++ b/arch/arm/mach-realview/include/mach/system.h @@ -44,6 +44,7 @@ static inline void arch_reset(char mode, const char *cmd) */ if (realview_reset) realview_reset(mode); + dsb(); } #endif diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index 4ae943bafa92..e83c654a58d0 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -52,12 +52,10 @@ void __init smp_init_cpus(void) ncores = scu_base ? scu_get_core_count(scu_base) : 1; /* sanity check */ - if (ncores > NR_CPUS) { - printk(KERN_WARNING - "Realview: no. of cores (%d) greater than configured " - "maximum of %d - clipping\n", - ncores, NR_CPUS); - ncores = NR_CPUS; + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; } for (i = 0; i < ncores; i++) diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index f1d3bd8f6f17..343a540d86a9 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -170,7 +170,9 @@ int __init s3c2410_init(void) { printk("S3C2410: Initialising architecture\n"); +#ifdef CONFIG_PM register_syscore_ops(&s3c2410_pm_syscore_ops); +#endif register_syscore_ops(&s3c24xx_irq_syscore_ops); return sysdev_register(&s3c2410_sysdev); diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index ef0958d3e5c6..57a1e01e4e50 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -245,7 +245,9 @@ int __init s3c2412_init(void) { printk("S3C2412: Initialising architecture\n"); +#ifdef CONFIG_PM register_syscore_ops(&s3c2412_pm_syscore_ops); +#endif register_syscore_ops(&s3c24xx_irq_syscore_ops); return sysdev_register(&s3c2412_sysdev); diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c index 494ce913dc95..20b3fdfb3051 100644 --- a/arch/arm/mach-s3c2416/s3c2416.c +++ b/arch/arm/mach-s3c2416/s3c2416.c @@ -97,7 +97,9 @@ int __init s3c2416_init(void) s3c_fb_setname("s3c2443-fb"); +#ifdef CONFIG_PM register_syscore_ops(&s3c2416_pm_syscore_ops); +#endif register_syscore_ops(&s3c24xx_irq_syscore_ops); return sysdev_register(&s3c2416_sysdev); diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c index ce99ff72838d..2270d3360216 100644 --- a/arch/arm/mach-s3c2440/s3c2440.c +++ b/arch/arm/mach-s3c2440/s3c2440.c @@ -55,7 +55,9 @@ int __init s3c2440_init(void) /* register suspend/resume handlers */ +#ifdef CONFIG_PM register_syscore_ops(&s3c2410_pm_syscore_ops); +#endif register_syscore_ops(&s3c244x_pm_syscore_ops); register_syscore_ops(&s3c24xx_irq_syscore_ops); diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c index 9ad99f8016a1..6f2b65e6e068 100644 --- a/arch/arm/mach-s3c2440/s3c2442.c +++ b/arch/arm/mach-s3c2440/s3c2442.c @@ -169,7 +169,9 @@ int __init s3c2442_init(void) { printk("S3C2442: Initialising architecture\n"); +#ifdef CONFIG_PM register_syscore_ops(&s3c2410_pm_syscore_ops); +#endif register_syscore_ops(&s3c244x_pm_syscore_ops); register_syscore_ops(&s3c24xx_irq_syscore_ops); diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index a1a7176675b9..38058af48972 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -128,7 +128,7 @@ static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate) unsigned long clkcon0; clkcon0 = __raw_readl(S3C2443_CLKDIV0); - clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK; + clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK; clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT; __raw_writel(clkcon0, S3C2443_CLKDIV0); } diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 9026249233ad..af0c2fe1ea37 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -65,7 +65,7 @@ #include <plat/iic.h> #include <plat/pm.h> -#include <sound/wm8915.h> +#include <sound/wm8996.h> #include <sound/wm8962.h> #include <sound/wm9081.h> @@ -614,7 +614,7 @@ static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = { .disable_touch = true, }; -static struct wm8915_retune_mobile_config wm8915_retune[] = { +static struct wm8996_retune_mobile_config wm8996_retune[] = { { .name = "Sub LPF", .rate = 48000, @@ -635,12 +635,12 @@ static struct wm8915_retune_mobile_config wm8915_retune[] = { }, }; -static struct wm8915_pdata wm8915_pdata __initdata = { +static struct wm8996_pdata wm8996_pdata __initdata = { .ldo_ena = S3C64XX_GPN(7), .gpio_base = CODEC_GPIO_BASE, .micdet_def = 1, - .inl_mode = WM8915_DIFFERRENTIAL_1, - .inr_mode = WM8915_DIFFERRENTIAL_1, + .inl_mode = WM8996_DIFFERRENTIAL_1, + .inr_mode = WM8996_DIFFERRENTIAL_1, .irq_flags = IRQF_TRIGGER_RISING, @@ -652,8 +652,8 @@ static struct wm8915_pdata wm8915_pdata __initdata = { 0x020e, /* GPIO5 == CLKOUT */ }, - .retune_mobile_cfgs = wm8915_retune, - .num_retune_mobile_cfgs = ARRAY_SIZE(wm8915_retune), + .retune_mobile_cfgs = wm8996_retune, + .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune), }; static struct wm8962_pdata wm8962_pdata __initdata = { @@ -679,8 +679,8 @@ static struct i2c_board_info i2c_devs1[] __initdata = { .platform_data = &glenfarclas_pmic_pdata }, { I2C_BOARD_INFO("wm1250-ev1", 0x27) }, - { I2C_BOARD_INFO("wm8915", 0x1a), - .platform_data = &wm8915_pdata, + { I2C_BOARD_INFO("wm8996", 0x1a), + .platform_data = &wm8996_pdata, .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, }, { I2C_BOARD_INFO("wm9081", 0x6c), diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index ecbea92bf83b..a9f3183e0290 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -262,45 +262,6 @@ static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = { .cols = 8, }; -static int smdk6410_backlight_init(struct device *dev) -{ - int ret; - - ret = gpio_request(S3C64XX_GPF(15), "Backlight"); - if (ret) { - printk(KERN_ERR "failed to request GPF for PWM-OUT1\n"); - return ret; - } - - /* Configure GPIO pin with S3C64XX_GPF15_PWM_TOUT1 */ - s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2)); - - return 0; -} - -static void smdk6410_backlight_exit(struct device *dev) -{ - s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_OUTPUT); - gpio_free(S3C64XX_GPF(15)); -} - -static struct platform_pwm_backlight_data smdk6410_backlight_data = { - .pwm_id = 1, - .max_brightness = 255, - .dft_brightness = 255, - .pwm_period_ns = 78770, - .init = smdk6410_backlight_init, - .exit = smdk6410_backlight_exit, -}; - -static struct platform_device smdk6410_backlight_device = { - .name = "pwm-backlight", - .dev = { - .parent = &s3c_device_timer[1].dev, - .platform_data = &smdk6410_backlight_data, - }, -}; - static struct map_desc smdk6410_iodesc[] = {}; static struct platform_device *smdk6410_devices[] __initdata = { diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 8bad64370689..055e2858b0dd 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -16,6 +16,7 @@ #include <linux/suspend.h> #include <linux/serial_core.h> #include <linux/io.h> +#include <linux/gpio.h> #include <mach/map.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c index 69ed4545112b..fe7380f5c3cd 100644 --- a/arch/arm/mach-s5p64x0/irq-eint.c +++ b/arch/arm/mach-s5p64x0/irq-eint.c @@ -129,7 +129,7 @@ static int s5p64x0_alloc_gc(void) } ct = gc->chip_types; - ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_ack = irq_gc_ack_set_bit; ct->chip.irq_mask = irq_gc_mask_set_bit; ct->chip.irq_unmask = irq_gc_mask_clr_bit; ct->chip.irq_set_type = s5p64x0_irq_eint_set_type; diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index 52a8e607bcc2..f5f8fa89679c 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -815,8 +815,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "s5pv210-fimc.0", + .name = "sclk_cam0", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 3), }, @@ -825,8 +824,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "s5pv210-fimc.1", + .name = "sclk_cam1", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 4), }, diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c index 309e388a8a83..f149d278377b 100644 --- a/arch/arm/mach-s5pv210/pm.c +++ b/arch/arm/mach-s5pv210/pm.c @@ -88,7 +88,7 @@ static struct sleep_save s5pv210_core_save[] = { SAVE_ITEM(S3C2410_TCNTO(0)), }; -void s5pv210_cpu_suspend(unsigned long arg) +static int s5pv210_cpu_suspend(unsigned long arg) { unsigned long tmp; diff --git a/arch/arm/mach-sa1100/pci-nanoengine.c b/arch/arm/mach-sa1100/pci-nanoengine.c index 964c6c3cd7a6..dd39fee59549 100644 --- a/arch/arm/mach-sa1100/pci-nanoengine.c +++ b/arch/arm/mach-sa1100/pci-nanoengine.c @@ -28,6 +28,7 @@ #include <asm/mach-types.h> #include <mach/nanoengine.h> +#include <mach/hardware.h> static DEFINE_SPINLOCK(nano_lock); diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index ce5c2513c6ce..cdfdd624d21d 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -341,6 +341,7 @@ static struct platform_device mipidsi0_device = { static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, .tmio_caps = MMC_CAP_SD_HIGHSPEED, .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, }; @@ -382,7 +383,7 @@ void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) } static struct sh_mobile_sdhi_info sh_sdhi1_info = { - .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, + .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT, .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ, .tmio_ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .set_pwr = ag5evm_sdhi1_set_pwr, diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 9e0856b2f9e9..523f608eb8cf 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -1412,6 +1412,7 @@ static void __init ap4evb_init(void) fsi_init_pm_clock(); sh7372_pm_init(); pm_clk_add(&fsi_device.dev, "spu2"); + pm_clk_add(&lcdc1_device.dev, "hdmi"); } static void __init ap4evb_timer_init(void) diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index d41c01f83f15..17c19dc25604 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -641,6 +641,8 @@ static struct usbhs_private usbhs0_private = { }, .driver_param = { .buswait_bwait = 4, + .d0_tx_id = SHDMA_SLAVE_USB0_TX, + .d1_rx_id = SHDMA_SLAVE_USB0_RX, }, }, }; @@ -810,6 +812,8 @@ static struct usbhs_private usbhs1_private = { .buswait_bwait = 4, .pipe_type = usbhs1_pipe_cfg, .pipe_size = ARRAY_SIZE(usbhs1_pipe_cfg), + .d0_tx_id = SHDMA_SLAVE_USB1_TX, + .d1_rx_id = SHDMA_SLAVE_USB1_RX, }, }, }; @@ -1588,6 +1592,7 @@ static void __init mackerel_init(void) hdmi_init_pm_clock(); sh7372_pm_init(); pm_clk_add(&fsi_device.dev, "spu2"); + pm_clk_add(&hdmi_lcdc_device.dev, "hdmi"); } static void __init mackerel_timer_init(void) diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 6b1619a65dba..66975921e646 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -503,16 +503,17 @@ static struct clk *late_main_clks[] = { &sh7372_fsidivb_clk, }; -enum { MSTP001, +enum { MSTP001, MSTP000, MSTP131, MSTP130, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP117, MSTP116, MSTP113, MSTP106, MSTP101, MSTP100, MSTP223, - MSTP218, MSTP217, MSTP216, - MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, - MSTP329, MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312, - MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP406, MSTP403, + MSTP218, MSTP217, MSTP216, MSTP214, MSTP208, MSTP207, + MSTP206, MSTP205, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, + MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312, + MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP407, MSTP406, + MSTP405, MSTP404, MSTP403, MSTP400, MSTP_NR }; #define MSTP(_parent, _reg, _bit, _flags) \ @@ -520,6 +521,7 @@ enum { MSTP001, static struct clk mstp_clks[MSTP_NR] = { [MSTP001] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 1, 0), /* IIC2 */ + [MSTP000] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 0, 0), /* MSIOF0 */ [MSTP131] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 31, 0), /* VEU3 */ [MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */ [MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */ @@ -538,14 +540,16 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* DMAC1 */ [MSTP217] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 17, 0), /* DMAC2 */ [MSTP216] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 16, 0), /* DMAC3 */ + [MSTP214] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 14, 0), /* USBDMAC */ + [MSTP208] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 8, 0), /* MSIOF1 */ [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */ [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */ + [MSTP205] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 5, 0), /* MSIOF2 */ [MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */ [MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */ [MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */ [MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */ [MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */ - [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ [MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSI2 */ [MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */ [MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */ @@ -557,8 +561,12 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP413] = MSTP(&pllc1_div2_clk, SMSTPCR4, 13, 0), /* HDMI */ [MSTP411] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 11, 0), /* IIC3 */ [MSTP410] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 10, 0), /* IIC4 */ + [MSTP407] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 7, 0), /* USB-DMAC1 */ [MSTP406] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 6, 0), /* USB1 */ + [MSTP405] = MSTP(&r_clk, SMSTPCR4, 5, 0), /* CMT4 */ + [MSTP404] = MSTP(&r_clk, SMSTPCR4, 4, 0), /* CMT3 */ [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */ + [MSTP400] = MSTP(&r_clk, SMSTPCR4, 0, 0), /* CMT2 */ }; static struct clk_lookup lookups[] = { @@ -609,6 +617,7 @@ static struct clk_lookup lookups[] = { /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */ + CLKDEV_DEV_ID("spi_sh_msiof.0", &mstp_clks[MSTP000]), /* MSIOF0 */ CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */ CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */ CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */ @@ -629,14 +638,16 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* DMAC1 */ CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), /* DMAC2 */ CLKDEV_DEV_ID("sh-dma-engine.2", &mstp_clks[MSTP216]), /* DMAC3 */ + CLKDEV_DEV_ID("sh-dma-engine.3", &mstp_clks[MSTP214]), /* USB-DMAC0 */ + CLKDEV_DEV_ID("spi_sh_msiof.1", &mstp_clks[MSTP208]), /* MSIOF1 */ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP206]), /* SCIFB */ + CLKDEV_DEV_ID("spi_sh_msiof.2", &mstp_clks[MSTP205]), /* MSIOF2 */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */ CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */ CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */ - CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */ CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */ @@ -650,11 +661,17 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-mobile-hdmi", &mstp_clks[MSTP413]), /* HDMI */ CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* IIC3 */ CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* IIC4 */ + CLKDEV_DEV_ID("sh-dma-engine.4", &mstp_clks[MSTP407]), /* USB-DMAC1 */ CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */ CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */ CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[MSTP406]), /* USB1 */ + CLKDEV_DEV_ID("sh_cmt.4", &mstp_clks[MSTP405]), /* CMT4 */ + CLKDEV_DEV_ID("sh_cmt.3", &mstp_clks[MSTP404]), /* CMT3 */ CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */ + CLKDEV_DEV_ID("sh_cmt.2", &mstp_clks[MSTP400]), /* CMT2 */ + CLKDEV_ICK_ID("hdmi", "sh_mobile_lcdc_fb.1", + &div6_reparent_clks[DIV6_HDMI]), CLKDEV_ICK_ID("ick", "sh-mobile-hdmi", &div6_reparent_clks[DIV6_HDMI]), CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]), CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]), diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 6db2ccabc2bf..61a846bb30f2 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -365,7 +365,7 @@ void __init sh73a0_clock_init(void) __raw_writel(0x108, SD2CKCR); /* detect main clock parent */ - switch ((__raw_readl(CKSCR) >> 24) & 0x03) { + switch ((__raw_readl(CKSCR) >> 28) & 0x03) { case 0: main_clk.parent = &sh73a0_extal1_clk; break; diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index ce595cee86cd..24e63a85e669 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -459,6 +459,10 @@ enum { SHDMA_SLAVE_SDHI2_TX, SHDMA_SLAVE_MMCIF_RX, SHDMA_SLAVE_MMCIF_TX, + SHDMA_SLAVE_USB0_TX, + SHDMA_SLAVE_USB0_RX, + SHDMA_SLAVE_USB1_TX, + SHDMA_SLAVE_USB1_RX, }; extern struct clk sh7372_extal1_clk; diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c index 3b28743c77eb..739315e30eb9 100644 --- a/arch/arm/mach-shmobile/intc-sh7372.c +++ b/arch/arm/mach-shmobile/intc-sh7372.c @@ -379,7 +379,7 @@ enum { /* BBIF2 */ VPU, TSIF1, - _3DG_SGX530, + /* 3DG */ _2DDMAC, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2, IPMMU_IPMMUR, IPMMU_IPMMUR2, @@ -436,7 +436,7 @@ static struct intc_vect intcs_vectors[] = { /* BBIF2 */ INTCS_VECT(VPU, 0x980), INTCS_VECT(TSIF1, 0x9a0), - INTCS_VECT(_3DG_SGX530, 0x9e0), + /* 3DG */ INTCS_VECT(_2DDMAC, 0xa00), INTCS_VECT(IIC2_ALI2, 0xa80), INTCS_VECT(IIC2_TACKI2, 0xaa0), INTCS_VECT(IIC2_WAITI2, 0xac0), INTCS_VECT(IIC2_DTEI2, 0xae0), @@ -521,7 +521,7 @@ static struct intc_mask_reg intcs_mask_registers[] = { RTDMAC_1_DEI3, RTDMAC_1_DEI2, RTDMAC_1_DEI1, RTDMAC_1_DEI0 } }, { 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */ { 0, 0, MSIOF, 0, - _3DG_SGX530, 0, 0, 0 } }, + 0, 0, 0, 0 } }, { 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */ { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0, 0, 0, 0, 0 } }, @@ -561,7 +561,6 @@ static struct intc_prio_reg intcs_prio_registers[] = { TMU_TUNI2, TSIF1 } }, { 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, 0, VEU, BEU } }, { 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF0, IIC0 } }, - { 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, _3DG_SGX530, 0, 0 } }, { 0xffd20028, 0, 16, 4, /* IPRKS */ { 0, 0, LMB, 0 } }, { 0xffd2002c, 0, 16, 4, /* IPRLS */ { IPMMU, 0, 0, 0 } }, { 0xffd20030, 0, 16, 4, /* IPRMS */ { IIC2, 0, 0, 0 } }, diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index 66f980625a33..e4e485fa2532 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -56,6 +56,12 @@ void __init smp_init_cpus(void) unsigned int ncores = shmobile_smp_get_core_count(); unsigned int i; + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; + } + for (i = 0; i < ncores; i++) set_cpu_possible(i, true); diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 79f0413d8725..2d9b1b1a2538 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -169,35 +169,35 @@ static struct platform_device scif6_device = { }; /* CMT */ -static struct sh_timer_config cmt10_platform_data = { - .name = "CMT10", - .channel_offset = 0x10, - .timer_bit = 0, +static struct sh_timer_config cmt2_platform_data = { + .name = "CMT2", + .channel_offset = 0x40, + .timer_bit = 5, .clockevent_rating = 125, .clocksource_rating = 125, }; -static struct resource cmt10_resources[] = { +static struct resource cmt2_resources[] = { [0] = { - .name = "CMT10", - .start = 0xe6138010, - .end = 0xe613801b, + .name = "CMT2", + .start = 0xe6130040, + .end = 0xe613004b, .flags = IORESOURCE_MEM, }, [1] = { - .start = evt2irq(0x0b00), /* CMT1_CMT10 */ + .start = evt2irq(0x0b80), /* CMT2 */ .flags = IORESOURCE_IRQ, }, }; -static struct platform_device cmt10_device = { +static struct platform_device cmt2_device = { .name = "sh_cmt", - .id = 10, + .id = 2, .dev = { - .platform_data = &cmt10_platform_data, + .platform_data = &cmt2_platform_data, }, - .resource = cmt10_resources, - .num_resources = ARRAY_SIZE(cmt10_resources), + .resource = cmt2_resources, + .num_resources = ARRAY_SIZE(cmt2_resources), }; /* TMU */ @@ -602,6 +602,150 @@ static struct platform_device dma2_device = { }, }; +/* + * USB-DMAC + */ + +unsigned int usbts_shift[] = {3, 4, 5}; + +enum { + XMIT_SZ_8BYTE = 0, + XMIT_SZ_16BYTE = 1, + XMIT_SZ_32BYTE = 2, +}; + +#define USBTS_INDEX2VAL(i) (((i) & 3) << 6) + +static const struct sh_dmae_channel sh7372_usb_dmae_channels[] = { + { + .offset = 0, + }, { + .offset = 0x20, + }, +}; + +/* USB DMAC0 */ +static const struct sh_dmae_slave_config sh7372_usb_dmae0_slaves[] = { + { + .slave_id = SHDMA_SLAVE_USB0_TX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, { + .slave_id = SHDMA_SLAVE_USB0_RX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, +}; + +static struct sh_dmae_pdata usb_dma0_platform_data = { + .slave = sh7372_usb_dmae0_slaves, + .slave_num = ARRAY_SIZE(sh7372_usb_dmae0_slaves), + .channel = sh7372_usb_dmae_channels, + .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels), + .ts_low_shift = 6, + .ts_low_mask = 0xc0, + .ts_high_shift = 0, + .ts_high_mask = 0, + .ts_shift = usbts_shift, + .ts_shift_num = ARRAY_SIZE(usbts_shift), + .dmaor_init = DMAOR_DME, + .chcr_offset = 0x14, + .chcr_ie_bit = 1 << 5, + .dmaor_is_32bit = 1, + .needs_tend_set = 1, + .no_dmars = 1, +}; + +static struct resource sh7372_usb_dmae0_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xe68a0020, + .end = 0xe68a0064 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* VCR/SWR/DMICR */ + .start = 0xe68a0000, + .end = 0xe68a0014 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* IRQ for channels */ + .start = evt2irq(0x0a00), + .end = evt2irq(0x0a00), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_dma0_device = { + .name = "sh-dma-engine", + .id = 3, + .resource = sh7372_usb_dmae0_resources, + .num_resources = ARRAY_SIZE(sh7372_usb_dmae0_resources), + .dev = { + .platform_data = &usb_dma0_platform_data, + }, +}; + +/* USB DMAC1 */ +static const struct sh_dmae_slave_config sh7372_usb_dmae1_slaves[] = { + { + .slave_id = SHDMA_SLAVE_USB1_TX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, { + .slave_id = SHDMA_SLAVE_USB1_RX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, +}; + +static struct sh_dmae_pdata usb_dma1_platform_data = { + .slave = sh7372_usb_dmae1_slaves, + .slave_num = ARRAY_SIZE(sh7372_usb_dmae1_slaves), + .channel = sh7372_usb_dmae_channels, + .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels), + .ts_low_shift = 6, + .ts_low_mask = 0xc0, + .ts_high_shift = 0, + .ts_high_mask = 0, + .ts_shift = usbts_shift, + .ts_shift_num = ARRAY_SIZE(usbts_shift), + .dmaor_init = DMAOR_DME, + .chcr_offset = 0x14, + .chcr_ie_bit = 1 << 5, + .dmaor_is_32bit = 1, + .needs_tend_set = 1, + .no_dmars = 1, +}; + +static struct resource sh7372_usb_dmae1_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xe68c0020, + .end = 0xe68c0064 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* VCR/SWR/DMICR */ + .start = 0xe68c0000, + .end = 0xe68c0014 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* IRQ for channels */ + .start = evt2irq(0x1d00), + .end = evt2irq(0x1d00), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_dma1_device = { + .name = "sh-dma-engine", + .id = 4, + .resource = sh7372_usb_dmae1_resources, + .num_resources = ARRAY_SIZE(sh7372_usb_dmae1_resources), + .dev = { + .platform_data = &usb_dma1_platform_data, + }, +}; + /* VPU */ static struct uio_info vpu_platform_data = { .name = "VPU5HG", @@ -818,7 +962,7 @@ static struct platform_device *sh7372_early_devices[] __initdata = { &scif4_device, &scif5_device, &scif6_device, - &cmt10_device, + &cmt2_device, &tmu00_device, &tmu01_device, }; @@ -829,6 +973,8 @@ static struct platform_device *sh7372_late_devices[] __initdata = { &dma0_device, &dma1_device, &dma2_device, + &usb_dma0_device, + &usb_dma1_device, &vpu_device, &veu0_device, &veu1_device, diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c index 0e1016a827ac..0e0fd4d889bd 100644 --- a/arch/arm/mach-tegra/cpu-tegra.c +++ b/arch/arm/mach-tegra/cpu-tegra.c @@ -32,7 +32,6 @@ #include <asm/system.h> -#include <mach/hardware.h> #include <mach/clk.h> /* Frequency table index must be sequential starting at 0 */ diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 0886cbccddee..7d2b5d03c1df 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -114,10 +114,10 @@ void __init smp_init_cpus(void) { unsigned int i, ncores = scu_get_core_count(scu_base); - if (ncores > NR_CPUS) { - printk(KERN_ERR "Tegra: no. of cores (%u) greater than configured (%u), clipping\n", - ncores, NR_CPUS); - ncores = NR_CPUS; + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; } for (i = 0; i < ncores; i++) diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 4210cb434dbc..a3e0c8692f0d 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -6,6 +6,7 @@ config UX500_SOC_COMMON select ARM_GIC select HAS_MTU select ARM_ERRATA_753970 + select ARM_ERRATA_754322 menu "Ux500 SoC" diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index a33df5f4c27a..eb5199102cfa 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -156,12 +156,10 @@ void __init smp_init_cpus(void) ncores = scu_base ? scu_get_core_count(scu_base) : 1; /* sanity check */ - if (ncores > NR_CPUS) { - printk(KERN_WARNING - "U8500: no. of cores (%d) greater than configured " - "maximum of %d - clipping\n", - ncores, NR_CPUS); - ncores = NR_CPUS; + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; } for (i = 0; i < ncores; i++) diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index bfd32f52c2db..2b1e836a76ed 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -221,6 +221,12 @@ static void ct_ca9x4_init_cpu_map(void) { int i, ncores = scu_get_core_count(MMIO_P2V(A9_MPCORE_SCU)); + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; + } + for (i = 0; i < ncores; ++i) set_cpu_possible(i, true); diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 9e6b93b1a043..d0d267a8d3f9 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -318,6 +318,10 @@ static struct clk v2m_sp804_clk = { .rate = 1000000, }; +static struct clk v2m_ref_clk = { + .rate = 32768, +}; + static struct clk dummy_apb_pclk; static struct clk_lookup v2m_lookups[] = { @@ -348,6 +352,9 @@ static struct clk_lookup v2m_lookups[] = { }, { /* CLCD */ .dev_id = "mb:clcd", .clk = &osc1_clk, + }, { /* SP805 WDT */ + .dev_id = "mb:wdt", + .clk = &v2m_ref_clk, }, { /* SP804 timers */ .dev_id = "sp804", .con_id = "v2m-timer0", diff --git a/arch/arm/mm/abort-macro.S b/arch/arm/mm/abort-macro.S index 52162d59407a..2cbf68ef0e83 100644 --- a/arch/arm/mm/abort-macro.S +++ b/arch/arm/mm/abort-macro.S @@ -17,7 +17,7 @@ cmp \tmp, # 0x5600 @ Is it ldrsb? orreq \tmp, \tmp, #1 << 11 @ Set L-bit if yes tst \tmp, #1 << 11 @ L = 0 -> write - orreq \psr, \psr, #1 << 11 @ yes. + orreq \fsr, \fsr, #1 << 11 @ yes. b do_DataAbort not_thumb: .endm diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index be7c638b648b..c335c76e0d88 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -22,6 +22,7 @@ #include <linux/sched.h> #include <linux/uaccess.h> +#include <asm/system.h> #include <asm/unaligned.h> #include "fault.h" @@ -85,6 +86,33 @@ core_param(alignment, ai_usermode, int, 0600); #define UM_FIXUP (1 << 1) #define UM_SIGNAL (1 << 2) +/* Return true if and only if the ARMv6 unaligned access model is in use. */ +static bool cpu_is_v6_unaligned(void) +{ + return cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U); +} + +static int safe_usermode(int new_usermode, bool warn) +{ + /* + * ARMv6 and later CPUs can perform unaligned accesses for + * most single load and store instructions up to word size. + * LDM, STM, LDRD and STRD still need to be handled. + * + * Ignoring the alignment fault is not an option on these + * CPUs since we spin re-faulting the instruction without + * making any progress. + */ + if (cpu_is_v6_unaligned() && !(new_usermode & (UM_FIXUP | UM_SIGNAL))) { + new_usermode |= UM_FIXUP; + + if (warn) + printk(KERN_WARNING "alignment: ignoring faults is unsafe on this CPU. Defaulting to fixup mode.\n"); + } + + return new_usermode; +} + #ifdef CONFIG_PROC_FS static const char *usermode_action[] = { "ignored", @@ -125,7 +153,7 @@ static ssize_t alignment_proc_write(struct file *file, const char __user *buffer if (get_user(mode, buffer)) return -EFAULT; if (mode >= '0' && mode <= '5') - ai_usermode = mode - '0'; + ai_usermode = safe_usermode(mode - '0', true); } return count; } @@ -886,9 +914,16 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (ai_usermode & UM_FIXUP) goto fixup; - if (ai_usermode & UM_SIGNAL) - force_sig(SIGBUS, current); - else { + if (ai_usermode & UM_SIGNAL) { + siginfo_t si; + + si.si_signo = SIGBUS; + si.si_errno = 0; + si.si_code = BUS_ADRALN; + si.si_addr = (void __user *)addr; + + force_sig_info(si.si_signo, &si, current); + } else { /* * We're about to disable the alignment trap and return to * user space. But if an interrupt occurs before actually @@ -926,20 +961,11 @@ static int __init alignment_init(void) return -ENOMEM; #endif - /* - * ARMv6 and later CPUs can perform unaligned accesses for - * most single load and store instructions up to word size. - * LDM, STM, LDRD and STRD still need to be handled. - * - * Ignoring the alignment fault is not an option on these - * CPUs since we spin re-faulting the instruction without - * making any progress. - */ - if (cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U)) { + if (cpu_is_v6_unaligned()) { cr_alignment &= ~CR_A; cr_no_alignment &= ~CR_A; set_cr(cr_alignment); - ai_usermode = UM_FIXUP; + ai_usermode = safe_usermode(ai_usermode, false); } hook_fault_code(1, do_alignment, SIGBUS, BUS_ADRALN, diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 44c086710d2b..3f9b9980478e 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -16,9 +16,12 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/err.h> #include <linux/init.h> #include <linux/spinlock.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> @@ -30,11 +33,19 @@ static DEFINE_SPINLOCK(l2x0_lock); static uint32_t l2x0_way_mask; /* Bitmask of active ways */ static uint32_t l2x0_size; +struct l2x0_regs l2x0_saved_regs; + +struct l2x0_of_data { + void (*setup)(const struct device_node *, __u32 *, __u32 *); + void (*save)(void); + void (*resume)(void); +}; + static inline void cache_wait_way(void __iomem *reg, unsigned long mask) { /* wait for cache operation by line or way to complete */ while (readl_relaxed(reg) & mask) - ; + cpu_relax(); } #ifdef CONFIG_CACHE_PL310 @@ -277,6 +288,25 @@ static void l2x0_disable(void) spin_unlock_irqrestore(&l2x0_lock, flags); } +static void l2x0_unlock(__u32 cache_id) +{ + int lockregs; + int i; + + if (cache_id == L2X0_CACHE_ID_PART_L310) + lockregs = 8; + else + /* L210 and unknown types */ + lockregs = 1; + + for (i = 0; i < lockregs; i++) { + writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE + + i * L2X0_LOCKDOWN_STRIDE); + writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE + + i * L2X0_LOCKDOWN_STRIDE); + } +} + void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) { __u32 aux; @@ -328,10 +358,14 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) * accessing the below registers will fault. */ if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + /* Make sure that I&D is not locked down when starting */ + l2x0_unlock(cache_id); /* l2x0 controller is disabled */ writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL); + l2x0_saved_regs.aux_ctrl = aux; + l2x0_inv_all(); /* enable L2X0 */ @@ -351,3 +385,202 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n", ways, cache_id, aux, l2x0_size); } + +#ifdef CONFIG_OF +static void __init l2x0_of_setup(const struct device_node *np, + __u32 *aux_val, __u32 *aux_mask) +{ + u32 data[2] = { 0, 0 }; + u32 tag = 0; + u32 dirty = 0; + u32 val = 0, mask = 0; + + of_property_read_u32(np, "arm,tag-latency", &tag); + if (tag) { + mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK; + val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT; + } + + of_property_read_u32_array(np, "arm,data-latency", + data, ARRAY_SIZE(data)); + if (data[0] && data[1]) { + mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK | + L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK; + val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) | + ((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT); + } + + of_property_read_u32(np, "arm,dirty-latency", &dirty); + if (dirty) { + mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK; + val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT; + } + + *aux_val &= ~mask; + *aux_val |= val; + *aux_mask &= ~mask; +} + +static void __init pl310_of_setup(const struct device_node *np, + __u32 *aux_val, __u32 *aux_mask) +{ + u32 data[3] = { 0, 0, 0 }; + u32 tag[3] = { 0, 0, 0 }; + u32 filter[2] = { 0, 0 }; + + of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag)); + if (tag[0] && tag[1] && tag[2]) + writel_relaxed( + ((tag[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) | + ((tag[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) | + ((tag[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT), + l2x0_base + L2X0_TAG_LATENCY_CTRL); + + of_property_read_u32_array(np, "arm,data-latency", + data, ARRAY_SIZE(data)); + if (data[0] && data[1] && data[2]) + writel_relaxed( + ((data[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) | + ((data[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) | + ((data[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT), + l2x0_base + L2X0_DATA_LATENCY_CTRL); + + of_property_read_u32_array(np, "arm,filter-ranges", + filter, ARRAY_SIZE(filter)); + if (filter[1]) { + writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M), + l2x0_base + L2X0_ADDR_FILTER_END); + writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L2X0_ADDR_FILTER_EN, + l2x0_base + L2X0_ADDR_FILTER_START); + } +} + +static void __init pl310_save(void) +{ + u32 l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) & + L2X0_CACHE_ID_RTL_MASK; + + l2x0_saved_regs.tag_latency = readl_relaxed(l2x0_base + + L2X0_TAG_LATENCY_CTRL); + l2x0_saved_regs.data_latency = readl_relaxed(l2x0_base + + L2X0_DATA_LATENCY_CTRL); + l2x0_saved_regs.filter_end = readl_relaxed(l2x0_base + + L2X0_ADDR_FILTER_END); + l2x0_saved_regs.filter_start = readl_relaxed(l2x0_base + + L2X0_ADDR_FILTER_START); + + if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) { + /* + * From r2p0, there is Prefetch offset/control register + */ + l2x0_saved_regs.prefetch_ctrl = readl_relaxed(l2x0_base + + L2X0_PREFETCH_CTRL); + /* + * From r3p0, there is Power control register + */ + if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0) + l2x0_saved_regs.pwr_ctrl = readl_relaxed(l2x0_base + + L2X0_POWER_CTRL); + } +} + +static void l2x0_resume(void) +{ + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + /* restore aux ctrl and enable l2 */ + l2x0_unlock(readl_relaxed(l2x0_base + L2X0_CACHE_ID)); + + writel_relaxed(l2x0_saved_regs.aux_ctrl, l2x0_base + + L2X0_AUX_CTRL); + + l2x0_inv_all(); + + writel_relaxed(1, l2x0_base + L2X0_CTRL); + } +} + +static void pl310_resume(void) +{ + u32 l2x0_revision; + + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + /* restore pl310 setup */ + writel_relaxed(l2x0_saved_regs.tag_latency, + l2x0_base + L2X0_TAG_LATENCY_CTRL); + writel_relaxed(l2x0_saved_regs.data_latency, + l2x0_base + L2X0_DATA_LATENCY_CTRL); + writel_relaxed(l2x0_saved_regs.filter_end, + l2x0_base + L2X0_ADDR_FILTER_END); + writel_relaxed(l2x0_saved_regs.filter_start, + l2x0_base + L2X0_ADDR_FILTER_START); + + l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) & + L2X0_CACHE_ID_RTL_MASK; + + if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) { + writel_relaxed(l2x0_saved_regs.prefetch_ctrl, + l2x0_base + L2X0_PREFETCH_CTRL); + if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0) + writel_relaxed(l2x0_saved_regs.pwr_ctrl, + l2x0_base + L2X0_POWER_CTRL); + } + } + + l2x0_resume(); +} + +static const struct l2x0_of_data pl310_data = { + pl310_of_setup, + pl310_save, + pl310_resume, +}; + +static const struct l2x0_of_data l2x0_data = { + l2x0_of_setup, + NULL, + l2x0_resume, +}; + +static const struct of_device_id l2x0_ids[] __initconst = { + { .compatible = "arm,pl310-cache", .data = (void *)&pl310_data }, + { .compatible = "arm,l220-cache", .data = (void *)&l2x0_data }, + { .compatible = "arm,l210-cache", .data = (void *)&l2x0_data }, + {} +}; + +int __init l2x0_of_init(__u32 aux_val, __u32 aux_mask) +{ + struct device_node *np; + struct l2x0_of_data *data; + struct resource res; + + np = of_find_matching_node(NULL, l2x0_ids); + if (!np) + return -ENODEV; + + if (of_address_to_resource(np, 0, &res)) + return -ENODEV; + + l2x0_base = ioremap(res.start, resource_size(&res)); + if (!l2x0_base) + return -ENOMEM; + + l2x0_saved_regs.phy_base = res.start; + + data = of_match_node(l2x0_ids, np)->data; + + /* L2 configuration can only be changed if the cache is disabled */ + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + if (data->setup) + data->setup(np, &aux_val, &aux_mask); + } + + if (data->save) + data->save(); + + l2x0_init(l2x0_base, aux_val, aux_mask); + + outer_cache.resume = data->resume; + return 0; +} +#endif diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 3b24bfa3b828..07c4bc8ea0a4 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -174,6 +174,10 @@ ENTRY(v7_coherent_user_range) dcache_line_size r2, r3 sub r3, r2, #1 bic r12, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: USER( mcr p15, 0, r12, c7, c11, 1 ) @ clean D line to the point of unification add r12, r12, r2 @@ -223,6 +227,10 @@ ENTRY(v7_flush_kern_dcache_area) add r1, r0, r1 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line add r0, r0, r2 @@ -247,6 +255,10 @@ v7_dma_inv_range: sub r3, r2, #1 tst r0, r3 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line tst r1, r3 @@ -270,6 +282,10 @@ v7_dma_clean_range: dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c10, 1 @ clean D / U line add r0, r0, r2 @@ -288,6 +304,10 @@ ENTRY(v7_dma_flush_range) dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line add r0, r0, r2 diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 0a0a1e7c20d2..235eb775fc78 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -123,8 +123,8 @@ static void __dma_free_buffer(struct page *page, size_t size) #endif #define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT) -#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT) -#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT) +#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PMD_SHIFT) +#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PMD_SHIFT) /* * These are the page tables (2MB each) covering uncached, DMA consistent allocations @@ -183,7 +183,7 @@ static int __init consistent_init(void) } consistent_pte[i++] = pte; - base += (1 << PGDIR_SHIFT); + base += PMD_SIZE; } while (base < CONSISTENT_END); return ret; @@ -324,6 +324,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, if (addr) *handle = pfn_to_dma(dev, page_to_pfn(page)); + else + __dma_free_buffer(page, size); return addr; } diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 3b5ea68acbb8..aa33949fef60 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -20,6 +20,7 @@ #include <linux/highmem.h> #include <linux/perf_event.h> +#include <asm/exception.h> #include <asm/system.h> #include <asm/pgtable.h> #include <asm/tlbflush.h> diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 2fee782077c1..f8037ba338ac 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -298,7 +298,7 @@ static void __init arm_bootmem_free(unsigned long min, unsigned long max_low, #ifdef CONFIG_HAVE_ARCH_PFN_VALID int pfn_valid(unsigned long pfn) { - return memblock_is_memory(pfn << PAGE_SHIFT); + return memblock_is_memory(__pfn_to_phys(pfn)); } EXPORT_SYMBOL(pfn_valid); #endif @@ -441,7 +441,7 @@ static inline int free_area(unsigned long pfn, unsigned long end, char *s) static inline void poison_init_mem(void *s, size_t count) { u32 *p = (u32 *)s; - while ((count = count - 4)) + for (; count != 0; count -= 4) *p++ = 0xe7fddef0; } @@ -496,6 +496,13 @@ static void __init free_unused_memmap(struct meminfo *mi) */ bank_start = min(bank_start, ALIGN(prev_bank_end, PAGES_PER_SECTION)); +#else + /* + * Align down here since the VM subsystem insists that the + * memmap entries are valid from the bank start aligned to + * MAX_ORDER_NR_PAGES. + */ + bank_start = round_down(bank_start, MAX_ORDER_NR_PAGES); #endif /* * If we had a previous bank, and there is a space diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 010566799c80..ad7cce3bc431 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -12,8 +12,8 @@ static inline pmd_t *pmd_off_k(unsigned long virt) struct mem_type { pteval_t prot_pte; - unsigned int prot_l1; - unsigned int prot_sect; + pmdval_t prot_l1; + pmdval_t prot_sect; unsigned int domain; }; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 594d677b92c8..226f1804be12 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -60,7 +60,7 @@ EXPORT_SYMBOL(pgprot_kernel); struct cachepolicy { const char policy[16]; unsigned int cr_mask; - unsigned int pmd; + pmdval_t pmd; pteval_t pte; }; @@ -288,7 +288,7 @@ static void __init build_mem_type_table(void) { struct cachepolicy *cp; unsigned int cr = get_cr(); - unsigned int user_pgprot, kern_pgprot, vecs_pgprot; + pteval_t user_pgprot, kern_pgprot, vecs_pgprot; int cpu_arch = cpu_architecture(); int i; @@ -863,14 +863,14 @@ static inline void prepare_page_table(void) /* * Clear out all the mappings below the kernel image. */ - for (addr = 0; addr < MODULES_VADDR; addr += PGDIR_SIZE) + for (addr = 0; addr < MODULES_VADDR; addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); #ifdef CONFIG_XIP_KERNEL /* The XIP kernel is mapped in the module area -- skip over it */ - addr = ((unsigned long)_etext + PGDIR_SIZE - 1) & PGDIR_MASK; + addr = ((unsigned long)_etext + PMD_SIZE - 1) & PMD_MASK; #endif - for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE) + for ( ; addr < PAGE_OFFSET; addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); /* @@ -885,10 +885,12 @@ static inline void prepare_page_table(void) * memory bank, up to the end of the vmalloc region. */ for (addr = __phys_to_virt(end); - addr < VMALLOC_END; addr += PGDIR_SIZE) + addr < VMALLOC_END; addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); } +#define SWAPPER_PG_DIR_SIZE (PTRS_PER_PGD * sizeof(pgd_t)) + /* * Reserve the special regions of memory */ @@ -898,7 +900,7 @@ void __init arm_mm_memblock_reserve(void) * Reserve the page tables. These are already in use, * and can only be in node 0. */ - memblock_reserve(__pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t)); + memblock_reserve(__pa(swapper_pg_dir), SWAPPER_PG_DIR_SIZE); #ifdef CONFIG_SA1111 /* @@ -926,7 +928,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc) */ vectors_page = early_alloc(PAGE_SIZE); - for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE) + for (addr = VMALLOC_END; addr; addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); /* diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 92bd102e3982..2e6849b41f66 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -379,7 +379,7 @@ ENTRY(cpu_arm920_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm920_suspend_size -.equ cpu_arm920_suspend_size, 4 * 3 +.equ cpu_arm920_suspend_size, 4 * 4 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_arm920_do_suspend) stmfd sp!, {r4 - r7, lr} diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 2bbcf053dffd..cd8f79c3a282 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -394,7 +394,7 @@ ENTRY(cpu_arm926_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm926_suspend_size -.equ cpu_arm926_suspend_size, 4 * 3 +.equ cpu_arm926_suspend_size, 4 * 4 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_arm926_do_suspend) stmfd sp!, {r4 - r7, lr} diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index f8f7ea34bfc5..683af3a182b7 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -410,6 +410,7 @@ __arm946_proc_info: .long 0x41009460 .long 0xff00fff0 .long 0 + .long 0 b __arm946_setup .long cpu_arch_name .long cpu_elf_name @@ -418,6 +419,6 @@ __arm946_proc_info: .long arm946_processor_functions .long 0 .long 0 - .long arm940_cache_fns + .long arm946_cache_fns .size __arm946_proc_info, . - __arm946_proc_info diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 07219c2ae114..69e7f2ef7384 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -182,11 +182,11 @@ ENDPROC(cpu_sa1100_do_suspend) ENTRY(cpu_sa1100_do_resume) ldmia r0, {r4 - r7} @ load cp regs - mov r1, #0 - mcr p15, 0, r1, c8, c7, 0 @ flush I+D TLBs - mcr p15, 0, r1, c7, c7, 0 @ flush I&D cache - mcr p15, 0, r1, c9, c0, 0 @ invalidate RB - mcr p15, 0, r1, c9, c0, 5 @ allow user space to use RB + mov ip, #0 + mcr p15, 0, ip, c8, c7, 0 @ flush I+D TLBs + mcr p15, 0, ip, c7, c7, 0 @ flush I&D cache + mcr p15, 0, ip, c9, c0, 0 @ invalidate RB + mcr p15, 0, ip, c9, c0, 5 @ allow user space to use RB mcr p15, 0, r4, c3, c0, 0 @ domain ID mcr p15, 0, r5, c2, c0, 0 @ translation table base addr diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 219138d2f158..a923aa0fd00d 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -223,6 +223,22 @@ __v6_setup: mrc p15, 0, r0, c1, c0, 0 @ read control register bic r0, r0, r5 @ clear bits them orr r0, r0, r6 @ set them +#ifdef CONFIG_ARM_ERRATA_364296 + /* + * Workaround for the 364296 ARM1136 r0p2 erratum (possible cache data + * corruption with hit-under-miss enabled). The conditional code below + * (setting the undocumented bit 31 in the auxiliary control register + * and the FI bit in the control register) disables hit-under-miss + * without putting the processor into full low interrupt latency mode. + */ + ldr r6, =0x4107b362 @ id for ARM1136 r0p2 + mrc p15, 0, r5, c0, c0, 0 @ get processor id + teq r5, r6 @ check for the faulty core + mrceq p15, 0, r5, c1, c0, 1 @ load aux control reg + orreq r5, r5, #(1 << 31) @ set the undocumented bit 31 + mcreq p15, 0, r5, c1, c0, 1 @ write aux control reg + orreq r0, r0, #(1 << 21) @ low interrupt latency configuration +#endif mov pc, lr @ return to head.S:__ret /* diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index a30e78542ccf..9591c8e9fb8c 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -66,6 +66,7 @@ ENDPROC(cpu_v7_proc_fin) ENTRY(cpu_v7_reset) mrc p15, 0, r1, c1, c0, 0 @ ctrl register bic r1, r1, #0x1 @ ...............m + THUMB( bic r1, r1, #1 << 30 ) @ SCTLR.TE (Thumb exceptions) mcr p15, 0, r1, c1, c0, 0 @ disable MMU isb mov pc, r0 @@ -217,7 +218,7 @@ ENDPROC(cpu_v7_set_pte_ext) /* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */ .globl cpu_v7_suspend_size .equ cpu_v7_suspend_size, 4 * 9 -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_v7_do_suspend) stmfd sp!, {r4 - r11, lr} mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID @@ -247,13 +248,16 @@ ENTRY(cpu_v7_do_resume) mcr p15, 0, r7, c2, c0, 0 @ TTB 0 mcr p15, 0, r8, c2, c0, 1 @ TTB 1 mcr p15, 0, ip, c2, c0, 2 @ TTB control register - mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register + mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary control register + teq r4, r10 @ Is it already set? + mcrne p15, 0, r10, c1, c0, 1 @ No, so write it mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control ldr r4, =PRRR @ PRRR ldr r5, =NMRR @ NMRR mcr p15, 0, r4, c10, c2, 0 @ write PRRR mcr p15, 0, r5, c10, c2, 1 @ write NMRR isb + dsb mov r0, r9 @ control register mov r2, r7, lsr #14 @ get TTB0 base mov r2, r2, lsl #14 diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 28c72a2006a1..755e1bf22681 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -406,7 +406,7 @@ ENTRY(cpu_xsc3_set_pte_ext) .align .globl cpu_xsc3_suspend_size -.equ cpu_xsc3_suspend_size, 4 * 8 +.equ cpu_xsc3_suspend_size, 4 * 7 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_xsc3_do_suspend) stmfd sp!, {r4 - r10, lr} @@ -418,12 +418,12 @@ ENTRY(cpu_xsc3_do_suspend) mrc p15, 0, r9, c1, c0, 1 @ auxiliary control reg mrc p15, 0, r10, c1, c0, 0 @ control reg bic r4, r4, #2 @ clear frequency change bit - stmia r0, {r1, r4 - r10} @ store v:p offset + cp regs + stmia r0, {r4 - r10} @ store cp regs ldmia sp!, {r4 - r10, pc} ENDPROC(cpu_xsc3_do_suspend) ENTRY(cpu_xsc3_do_resume) - ldmia r0, {r1, r4 - r10} @ load v:p offset + cp regs + ldmia r0, {r4 - r10} @ load cp regs mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index 91fc7cdb5dc9..e4dde91f0231 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -44,6 +44,14 @@ #define UART_PADDR MX51_UART1_BASE_ADDR #endif +/* iMX50/53 have same addresses, but not iMX51 */ +#if defined(CONFIG_SOC_IMX50) || defined(CONFIG_SOC_IMX53) +#ifdef UART_PADDR +#error "CONFIG_DEBUG_LL is incompatible with multiple archs" +#endif +#define UART_PADDR MX53_UART1_BASE_ADDR +#endif + #define UART_VADDR IMX_IO_ADDRESS(UART_PADDR) .macro addruart, rp, rv diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h index 9440b9e00e89..5408fd1fc736 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h @@ -30,6 +30,9 @@ #define MX53_SDHC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH | \ PAD_CTL_SRE_FAST) +#define PAD_CTRL_I2C (PAD_CTL_SRE_FAST | PAD_CTL_ODE | PAD_CTL_PKE | \ + PAD_CTL_PUE | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP \ + | PAD_CTL_HYS) #define _MX53_PAD_GPIO_19__KPP_COL_5 IOMUX_PAD(0x348, 0x20, 0, 0x840, 0, 0) #define _MX53_PAD_GPIO_19__GPIO4_5 IOMUX_PAD(0x348, 0x20, 1, 0x0, 0, 0) @@ -1256,7 +1259,7 @@ #define MX53_PAD_KEY_COL3__GPIO4_12 (_MX53_PAD_KEY_COL3__GPIO4_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL3__USBOH3_H2_DP (_MX53_PAD_KEY_COL3__USBOH3_H2_DP | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL3__SPDIF_IN1 (_MX53_PAD_KEY_COL3__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_KEY_COL3__I2C2_SCL (_MX53_PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL3__I2C2_SCL (_MX53_PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_KEY_COL3__ECSPI1_SS3 (_MX53_PAD_KEY_COL3__ECSPI1_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL3__FEC_CRS (_MX53_PAD_KEY_COL3__FEC_CRS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK (_MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1264,7 +1267,7 @@ #define MX53_PAD_KEY_ROW3__GPIO4_13 (_MX53_PAD_KEY_ROW3__GPIO4_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW3__USBOH3_H2_DM (_MX53_PAD_KEY_ROW3__USBOH3_H2_DM | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK (_MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_KEY_ROW3__I2C2_SDA (_MX53_PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW3__I2C2_SDA (_MX53_PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT (_MX53_PAD_KEY_ROW3__OSC32K_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP (_MX53_PAD_KEY_ROW3__CCM_PLL4_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 (_MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1536,7 +1539,7 @@ #define MX53_PAD_CSI0_DAT8__KPP_COL_7 (_MX53_PAD_CSI0_DAT8__KPP_COL_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK (_MX53_PAD_CSI0_DAT8__ECSPI2_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC (_MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT8__I2C1_SDA (_MX53_PAD_CSI0_DAT8__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT8__I2C1_SDA (_MX53_PAD_CSI0_DAT8__I2C1_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 (_MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 (_MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 (_MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1544,7 +1547,7 @@ #define MX53_PAD_CSI0_DAT9__KPP_ROW_7 (_MX53_PAD_CSI0_DAT9__KPP_ROW_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI (_MX53_PAD_CSI0_DAT9__ECSPI2_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR (_MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT9__I2C1_SCL (_MX53_PAD_CSI0_DAT9__I2C1_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT9__I2C1_SCL (_MX53_PAD_CSI0_DAT9__I2C1_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 (_MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 (_MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 (_MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1631,25 +1634,25 @@ #define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK (_MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS (_MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_EB2__ECSPI1_SS0 (_MX53_PAD_EIM_EB2__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_EB2__I2C2_SCL (_MX53_PAD_EIM_EB2__I2C2_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB2__I2C2_SCL (_MX53_PAD_EIM_EB2__I2C2_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D16__EMI_WEIM_D_16 (_MX53_PAD_EIM_D16__EMI_WEIM_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D16__GPIO3_16 (_MX53_PAD_EIM_D16__GPIO3_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D16__IPU_DI0_PIN5 (_MX53_PAD_EIM_D16__IPU_DI0_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK (_MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D16__ECSPI1_SCLK (_MX53_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D16__I2C2_SDA (_MX53_PAD_EIM_D16__I2C2_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D16__I2C2_SDA (_MX53_PAD_EIM_D16__I2C2_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D17__EMI_WEIM_D_17 (_MX53_PAD_EIM_D17__EMI_WEIM_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D17__GPIO3_17 (_MX53_PAD_EIM_D17__GPIO3_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D17__IPU_DI0_PIN6 (_MX53_PAD_EIM_D17__IPU_DI0_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN (_MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D17__ECSPI1_MISO (_MX53_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D17__I2C3_SCL (_MX53_PAD_EIM_D17__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D17__I2C3_SCL (_MX53_PAD_EIM_D17__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D18__EMI_WEIM_D_18 (_MX53_PAD_EIM_D18__EMI_WEIM_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D18__GPIO3_18 (_MX53_PAD_EIM_D18__GPIO3_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D18__IPU_DI0_PIN7 (_MX53_PAD_EIM_D18__IPU_DI0_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO (_MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D18__ECSPI1_MOSI (_MX53_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D18__I2C3_SDA (_MX53_PAD_EIM_D18__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D18__I2C3_SDA (_MX53_PAD_EIM_D18__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D18__IPU_DI1_D0_CS (_MX53_PAD_EIM_D18__IPU_DI1_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D19__EMI_WEIM_D_19 (_MX53_PAD_EIM_D19__EMI_WEIM_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D19__GPIO3_19 (_MX53_PAD_EIM_D19__GPIO3_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1672,7 +1675,7 @@ #define MX53_PAD_EIM_D21__IPU_DI0_PIN17 (_MX53_PAD_EIM_D21__IPU_DI0_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK (_MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D21__CSPI_SCLK (_MX53_PAD_EIM_D21__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D21__I2C1_SCL (_MX53_PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D21__I2C1_SCL (_MX53_PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC (_MX53_PAD_EIM_D21__USBOH3_USBOTG_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D22__EMI_WEIM_D_22 (_MX53_PAD_EIM_D22__EMI_WEIM_D_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D22__GPIO3_22 (_MX53_PAD_EIM_D22__GPIO3_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1732,7 +1735,7 @@ #define MX53_PAD_EIM_D28__UART2_CTS (_MX53_PAD_EIM_D28__UART2_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO (_MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D28__CSPI_MOSI (_MX53_PAD_EIM_D28__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D28__I2C1_SDA (_MX53_PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D28__I2C1_SDA (_MX53_PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D28__IPU_EXT_TRIG (_MX53_PAD_EIM_D28__IPU_EXT_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D28__IPU_DI0_PIN13 (_MX53_PAD_EIM_D28__IPU_DI0_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D29__EMI_WEIM_D_29 (_MX53_PAD_EIM_D29__EMI_WEIM_D_29 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2297,7 +2300,7 @@ #define MX53_PAD_GPIO_9__SCC_FAIL_STATE (_MX53_PAD_GPIO_9__SCC_FAIL_STATE | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_3__ESAI1_HCKR (_MX53_PAD_GPIO_3__ESAI1_HCKR | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_3__GPIO1_3 (_MX53_PAD_GPIO_3__GPIO1_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_GPIO_3__I2C3_SCL (_MX53_PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_3__I2C3_SCL (_MX53_PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN (_MX53_PAD_GPIO_3__DPLLIP1_TOG_EN | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_3__CCM_CLKO2 (_MX53_PAD_GPIO_3__CCM_CLKO2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 (_MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2305,7 +2308,7 @@ #define MX53_PAD_GPIO_3__MLB_MLBCLK (_MX53_PAD_GPIO_3__MLB_MLBCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_6__ESAI1_SCKT (_MX53_PAD_GPIO_6__ESAI1_SCKT | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_6__GPIO1_6 (_MX53_PAD_GPIO_6__GPIO1_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_GPIO_6__I2C3_SDA (_MX53_PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_6__I2C3_SDA (_MX53_PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_GPIO_6__CCM_CCM_OUT_0 (_MX53_PAD_GPIO_6__CCM_CCM_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB (_MX53_PAD_GPIO_6__CSU_CSU_INT_DEB | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 (_MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2333,7 +2336,7 @@ #define MX53_PAD_GPIO_5__CCM_CLKO (_MX53_PAD_GPIO_5__CCM_CLKO | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 (_MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 (_MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_GPIO_5__I2C3_SCL (_MX53_PAD_GPIO_5__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_5__I2C3_SCL (_MX53_PAD_GPIO_5__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_GPIO_5__CCM_PLL1_BYP (_MX53_PAD_GPIO_5__CCM_PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_7__ESAI1_TX4_RX1 (_MX53_PAD_GPIO_7__ESAI1_TX4_RX1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_7__GPIO1_7 (_MX53_PAD_GPIO_7__GPIO1_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2356,7 +2359,7 @@ #define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT (_MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 (_MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_16__SPDIF_IN1 (_MX53_PAD_GPIO_16__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_GPIO_16__I2C3_SDA (_MX53_PAD_GPIO_16__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_16__I2C3_SDA (_MX53_PAD_GPIO_16__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_GPIO_16__SJC_DE_B (_MX53_PAD_GPIO_16__SJC_DE_B | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_17__ESAI1_TX0 (_MX53_PAD_GPIO_17__ESAI1_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_17__GPIO7_12 (_MX53_PAD_GPIO_17__GPIO7_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 6e6735f04ee3..5b605a9eb091 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -13,6 +13,8 @@ config ARCH_OMAP1 bool "TI OMAP1" select CLKDEV_LOOKUP select CLKSRC_MMIO + select GENERIC_IRQ_CHIP + select HAVE_IDE help "Systems based on omap7xx, omap15xx or omap16xx" diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index d1c916fcf770..dc562a5c0a8a 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -195,6 +195,11 @@ #define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */ #define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */ + +/* Only for AM35xx */ +#define AM35XX_DMA_UART4_TX 54 +#define AM35XX_DMA_UART4_RX 55 + /*----------------------------------------------------------------------------*/ #define OMAP1_DMA_TOUT_IRQ (1 << 0) diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 926d25c780f3..30e10719b774 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -357,6 +357,7 @@ #define INT_35XX_EMAC_C0_TX_PULSE_IRQ 69 #define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70 #define INT_35XX_USBOTG_IRQ 71 +#define INT_35XX_UART4 84 #define INT_35XX_CCDC_VD0_IRQ 88 #define INT_35XX_CCDC_VD1_IRQ 92 #define INT_35XX_CCDC_VD2_IRQ 93 diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index 2723f9166ea2..de3b10c18127 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -56,6 +56,9 @@ #define TI816X_UART2_BASE 0x48022000 #define TI816X_UART3_BASE 0x48024000 +/* AM3505/3517 UART4 */ +#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */ + /* External port on Zoom2/3 */ #define ZOOM_UART_BASE 0x10000000 #define ZOOM_UART_VIRT 0xfa400000 diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c index c60737c49a32..79e7fedb8602 100644 --- a/arch/arm/plat-omap/iovmm.c +++ b/arch/arm/plat-omap/iovmm.c @@ -423,9 +423,6 @@ static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, u32 da, { unsigned int i; struct scatterlist *sg; - void *va; - - va = phys_to_virt(pa); for_each_sg(sgt->sgl, sg, sgt->nents, i) { unsigned bytes; diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index b6b409744954..02609eee0562 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -615,6 +615,9 @@ static int _od_resume_noirq(struct device *dev) return pm_generic_resume_noirq(dev); } +#else +#define _od_suspend_noirq NULL +#define _od_resume_noirq NULL #endif static struct dev_pm_domain omap_device_pm_domain = { @@ -622,7 +625,8 @@ static struct dev_pm_domain omap_device_pm_domain = { SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume, _od_runtime_idle) USE_PLATFORM_PM_SLEEP_OPS - SET_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq, _od_resume_noirq) + .suspend_noirq = _od_suspend_noirq, + .resume_noirq = _od_resume_noirq, } }; diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c index 02af235298e2..5f84a3f13ef9 100644 --- a/arch/arm/plat-s5p/clock.c +++ b/arch/arm/plat-s5p/clock.c @@ -192,7 +192,7 @@ unsigned long s5p_spdif_get_rate(struct clk *clk) if (IS_ERR(pclk)) return -EINVAL; - rate = pclk->ops->get_rate(clk); + rate = pclk->ops->get_rate(pclk); clk_put(pclk); return rate; diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index 327ab9f662e8..c65eb791d1bb 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -23,6 +23,8 @@ #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> +#include <asm/mach/irq.h> + #define GPIO_BASE(chip) (((unsigned long)(chip)->base) & 0xFFFFF000u) #define CON_OFFSET 0x700 @@ -81,6 +83,9 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) int group, pend_offset, mask_offset; unsigned int pend, mask; + struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); + for (group = 0; group < bank->nr_groups; group++) { struct s3c_gpio_chip *chip = bank->chips[group]; if (!chip) @@ -102,23 +107,25 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) pend &= ~BIT(offset); } } + chained_irq_exit(chip, desc); } static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) { static int used_gpioint_groups = 0; int group = chip->group; - struct s5p_gpioint_bank *bank = NULL; + struct s5p_gpioint_bank *b, *bank = NULL; struct irq_chip_generic *gc; struct irq_chip_type *ct; if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT) return -ENOMEM; - list_for_each_entry(bank, &banks, list) { - if (group >= bank->start && - group < bank->start + bank->nr_groups) + list_for_each_entry(b, &banks, list) { + if (group >= b->start && group < b->start + b->nr_groups) { + bank = b; break; + } } if (!bank) return -EINVAL; @@ -156,9 +163,9 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) ct->chip.irq_mask = irq_gc_mask_set_bit; ct->chip.irq_unmask = irq_gc_mask_clr_bit; ct->chip.irq_set_type = s5p_gpioint_set_type, - ct->regs.ack = PEND_OFFSET + REG_OFFSET(chip->group); - ct->regs.mask = MASK_OFFSET + REG_OFFSET(chip->group); - ct->regs.type = CON_OFFSET + REG_OFFSET(chip->group); + ct->regs.ack = PEND_OFFSET + REG_OFFSET(group - bank->start); + ct->regs.mask = MASK_OFFSET + REG_OFFSET(group - bank->start); + ct->regs.type = CON_OFFSET + REG_OFFSET(group - bank->start); irq_setup_generic_chip(gc, IRQ_MSK(chip->chip.ngpio), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST | IRQ_NOPROBE, 0); diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 302c42670bd1..3b4451979d1b 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -64,6 +64,17 @@ static LIST_HEAD(clocks); */ DEFINE_SPINLOCK(clocks_lock); +/* Global watchdog clock used by arch_wtd_reset() callback */ +struct clk *s3c2410_wdtclk; +static int __init s3c_wdt_reset_init(void) +{ + s3c2410_wdtclk = clk_get(NULL, "watchdog"); + if (IS_ERR(s3c2410_wdtclk)) + printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); + return 0; +} +arch_initcall(s3c_wdt_reset_init); + /* enable and disable calls for use with the clk struct */ static int clk_null_enable(struct clk *clk, int enable) diff --git a/arch/arm/plat-samsung/include/plat/backlight.h b/arch/arm/plat-samsung/include/plat/backlight.h index 51d8da846a62..ad530c78fe8c 100644 --- a/arch/arm/plat-samsung/include/plat/backlight.h +++ b/arch/arm/plat-samsung/include/plat/backlight.h @@ -20,7 +20,7 @@ struct samsung_bl_gpio_info { int func; }; -extern void samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, +extern void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, struct platform_pwm_backlight_data *bl_data); #endif /* __ASM_PLAT_BACKLIGHT_H */ diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index 87d5b38a86fb..73c66d4d10fa 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -9,6 +9,9 @@ * published by the Free Software Foundation. */ +#ifndef __ASM_PLAT_CLOCK_H +#define __ASM_PLAT_CLOCK_H __FILE__ + #include <linux/spinlock.h> #include <linux/clkdev.h> @@ -121,3 +124,8 @@ extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable); extern void s3c_pwmclk_init(void); +/* Global watchdog clock used by arch_wtd_reset() callback */ + +extern struct clk *s3c2410_wdtclk; + +#endif /* __ASM_PLAT_CLOCK_H */ diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h index 54b762acb5a0..40dbb2b0ae22 100644 --- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h +++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include <plat/clock.h> #include <plat/regs-watchdog.h> #include <mach/map.h> @@ -19,17 +20,12 @@ static inline void arch_wdt_reset(void) { - struct clk *wdtclk; - printk("arch_reset: attempting watchdog reset\n"); __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ - wdtclk = clk_get(NULL, "watchdog"); - if (!IS_ERR(wdtclk)) { - clk_enable(wdtclk); - } else - printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); + if (s3c2410_wdtclk) + clk_enable(s3c2410_wdtclk); /* put initial values into count and data */ __raw_writel(0x80, S3C2410_WTCNT); diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c index f714d060370d..51583cd30164 100644 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -22,9 +22,14 @@ #include <plat/irq-vic-timer.h> #include <plat/regs-timer.h> +#include <asm/mach/irq.h> + static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc) { + struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); generic_handle_irq((int)desc->irq_data.handler_data); + chained_irq_exit(chip, desc); } /* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */ diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 3b3776d0a1a7..62cc8f981171 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -351,7 +351,7 @@ centro MACH_CENTRO CENTRO 1944 nokia_rx51 MACH_NOKIA_RX51 NOKIA_RX51 1955 omap_zoom2 MACH_OMAP_ZOOM2 OMAP_ZOOM2 1967 cpuat9260 MACH_CPUAT9260 CPUAT9260 1973 -eukrea_cpuimx27 MACH_CPUIMX27 CPUIMX27 1975 +eukrea_cpuimx27 MACH_EUKREA_CPUIMX27 EUKREA_CPUIMX27 1975 acs5k MACH_ACS5K ACS5K 1982 snapper_9260 MACH_SNAPPER_9260 SNAPPER_9260 1987 dsm320 MACH_DSM320 DSM320 1988 @@ -476,8 +476,8 @@ cns3420vb MACH_CNS3420VB CNS3420VB 2776 omap4_panda MACH_OMAP4_PANDA OMAP4_PANDA 2791 ti8168evm MACH_TI8168EVM TI8168EVM 2800 teton_bga MACH_TETON_BGA TETON_BGA 2816 -eukrea_cpuimx25sd MACH_EUKREA_CPUIMX25 EUKREA_CPUIMX25 2820 -eukrea_cpuimx35sd MACH_EUKREA_CPUIMX35 EUKREA_CPUIMX35 2821 +eukrea_cpuimx25sd MACH_EUKREA_CPUIMX25SD EUKREA_CPUIMX25SD 2820 +eukrea_cpuimx35sd MACH_EUKREA_CPUIMX35SD EUKREA_CPUIMX35SD 2821 eukrea_cpuimx51sd MACH_EUKREA_CPUIMX51SD EUKREA_CPUIMX51SD 2822 eukrea_cpuimx51 MACH_EUKREA_CPUIMX51 EUKREA_CPUIMX51 2823 smdkc210 MACH_SMDKC210 SMDKC210 2838 @@ -910,7 +910,7 @@ omapl138_case_a3 MACH_OMAPL138_CASE_A3 OMAPL138_CASE_A3 3280 uemd MACH_UEMD UEMD 3281 ccwmx51mut MACH_CCWMX51MUT CCWMX51MUT 3282 rockhopper MACH_ROCKHOPPER ROCKHOPPER 3283 -nookcolor MACH_NOOKCOLOR NOOKCOLOR 3284 +encore MACH_ENCORE ENCORE 3284 hkdkc100 MACH_HKDKC100 HKDKC100 3285 ts42xx MACH_TS42XX TS42XX 3286 aebl MACH_AEBL AEBL 3287 diff --git a/arch/arm/vfp/Makefile b/arch/arm/vfp/Makefile index 6de73aab0195..a81404c09d5d 100644 --- a/arch/arm/vfp/Makefile +++ b/arch/arm/vfp/Makefile @@ -7,7 +7,7 @@ # ccflags-y := -DDEBUG # asflags-y := -DDEBUG -KBUILD_AFLAGS :=$(KBUILD_AFLAGS:-msoft-float=-Wa,-mfpu=softvfp+vfp) +KBUILD_AFLAGS :=$(KBUILD_AFLAGS:-msoft-float=-Wa,-mfpu=softvfp+vfp -mfloat-abi=soft) LDFLAGS +=--no-warn-mismatch obj-y += vfp.o |