diff options
Diffstat (limited to 'arch/arm')
641 files changed, 13169 insertions, 6275 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4c1a35f15838..0b731e8ab17e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -22,9 +22,11 @@ config ARM select CLONE_BACKWARDS select CPU_PM if (SUSPEND || CPU_IDLE) select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS + select DMA_NOOP_OPS if !MMU select EDAC_SUPPORT select EDAC_ATOMIC_SCRUB select GENERIC_ALLOCATOR + select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI) select GENERIC_CLOCKEVENTS_BROADCAST if SMP select GENERIC_CPU_AUTOPROBE @@ -337,7 +339,7 @@ config ARCH_MULTIPLATFORM select ARM_HAS_SG_CHAIN select ARM_PATCH_PHYS_VIRT select AUTO_ZRELADDR - select CLKSRC_OF + select TIMER_OF select COMMON_CLK select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI @@ -351,7 +353,7 @@ config ARM_SINGLE_ARMV7M depends on !MMU select ARM_NVIC select AUTO_ZRELADDR - select CLKSRC_OF + select TIMER_OF select COMMON_CLK select CPU_V7M select GENERIC_CLOCKEVENTS @@ -532,7 +534,7 @@ config ARCH_PXA select CLKDEV_LOOKUP select CLKSRC_PXA select CLKSRC_MMIO - select CLKSRC_OF + select TIMER_OF select CPU_XSCALE if !CPU_XSC3 select GENERIC_CLOCKEVENTS select GPIO_PXA @@ -571,7 +573,7 @@ config ARCH_SA1100 select CLKDEV_LOOKUP select CLKSRC_MMIO select CLKSRC_PXA - select CLKSRC_OF if OF + select TIMER_OF if OF select CPU_FREQ select CPU_SA1100 select GENERIC_CLOCKEVENTS @@ -711,6 +713,8 @@ config ARCH_VIRT # source "arch/arm/mach-mvebu/Kconfig" +source "arch/arm/mach-actions/Kconfig" + source "arch/arm/mach-alpine/Kconfig" source "arch/arm/mach-artpec/Kconfig" @@ -1357,7 +1361,7 @@ config HAVE_ARM_ARCH_TIMER config HAVE_ARM_TWD bool - select CLKSRC_OF if OF + select TIMER_OF if OF help This options enables support for the ARM timer and watchdog unit @@ -1416,6 +1420,7 @@ choice config VMSPLIT_3G bool "3G/1G user/kernel split" config VMSPLIT_3G_OPT + depends on !ARM_LPAE bool "3G/1G user/kernel split (for full 1G low memory)" config VMSPLIT_2G bool "2G/2G user/kernel split" @@ -1460,6 +1465,7 @@ config ARM_PSCI # selected platforms. config ARCH_NR_GPIO int + default 2048 if ARCH_SOCFPGA default 1024 if ARCH_BRCMSTB || ARCH_SHMOBILE || ARCH_TEGRA || \ ARCH_ZYNQ default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \ @@ -1637,7 +1643,7 @@ config ARCH_SELECT_MEMORY_MODEL config HAVE_ARCH_PFN_VALID def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM -config HAVE_GENERIC_RCU_GUP +config HAVE_GENERIC_GUP def_bool y depends on ARM_LPAE @@ -2061,6 +2067,23 @@ config EFI is only useful for kernels that may run on systems that have UEFI firmware. +config DMI + bool "Enable support for SMBIOS (DMI) tables" + depends on EFI + default y + help + This enables SMBIOS/DMI feature for systems. + + This option is only useful on systems that have UEFI firmware. + However, even with this option, the resultant kernel should + continue to boot on existing non-UEFI platforms. + + NOTE: This does *NOT* enable or encourage the use of DMI quirks, + i.e., the the practice of identifying the platform via DMI to + decide whether certain workarounds for buggy hardware and/or + firmware need to be enabled. This would require the DMI subsystem + to be enabled much earlier than we do on ARM, which is non-trivial. + endmenu menu "CPU Power Management" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 426d2716f55d..447629d89884 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -145,6 +145,15 @@ choice Say Y here if you want kernel low-level debugging support on the USART3 port of sama5d4. + config DEBUG_AT91_SAMV7_USART1 + bool "Kernel low-level debugging via SAMV7 USART1" + select DEBUG_AT91_UART + depends on SOC_SAMV7 + help + Say Y here if you want the debug print routines to direct + their output to the USART1 port on SAMV7 based + machines. + config DEBUG_BCM2835 bool "Kernel low-level debugging on BCM2835 PL011 UART" depends on ARCH_BCM2835 && ARCH_MULTI_V6 @@ -751,6 +760,7 @@ choice ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT APQ8064 0x16640000 0xf0040000 APQ8084 0xf995e000 0xfa75e000 + IPQ4019 0x078af000 0xf78af000 MSM8X60 0x19c40000 0xf0040000 MSM8960 0x16440000 0xf0040000 MSM8974 0xf991e000 0xfa71e000 @@ -776,6 +786,30 @@ choice their output to the standard serial port on the RealView PB1176 platform. + config DEBUG_RV1108_UART0 + bool "Kernel low-level debugging messages via Rockchip RV1108 UART0" + depends on ARCH_ROCKCHIP + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Rockchip RV1108 based platforms. + + config DEBUG_RV1108_UART1 + bool "Kernel low-level debugging messages via Rockchip RV1108 UART1" + depends on ARCH_ROCKCHIP + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Rockchip RV1108 based platforms. + + config DEBUG_RV1108_UART2 + bool "Kernel low-level debugging messages via Rockchip RV1108 UART2" + depends on ARCH_ROCKCHIP + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Rockchip RV1108 based platforms. + config DEBUG_RK29_UART0 bool "Kernel low-level debugging messages via Rockchip RK29 UART0" depends on ARCH_ROCKCHIP @@ -1465,6 +1499,9 @@ config DEBUG_UART_PHYS default 0x10126000 if DEBUG_RK3X_UART1 default 0x101f1000 if DEBUG_VERSATILE default 0x101fb000 if DEBUG_NOMADIK_UART + default 0x10210000 if DEBUG_RV1108_UART2 + default 0x10220000 if DEBUG_RV1108_UART1 + default 0x10230000 if DEBUG_RV1108_UART0 default 0x11002000 if DEBUG_MT8127_UART0 default 0x11006000 if DEBUG_MT6589_UART0 default 0x11009000 if DEBUG_MT8135_UART3 @@ -1481,6 +1518,7 @@ config DEBUG_UART_PHYS default 0x3f201000 if DEBUG_BCM2836 default 0x3e000000 if DEBUG_BCM_KONA_UART default 0x4000e400 if DEBUG_LL_UART_EFM32 + default 0x40028000 if DEBUG_AT91_SAMV7_USART1 default 0x40081000 if DEBUG_LPC18XX_UART0 default 0x40090000 if DEBUG_LPC32XX default 0x40100000 if DEBUG_PXA_UART1 @@ -1563,6 +1601,9 @@ config DEBUG_UART_PHYS config DEBUG_UART_VIRT hex "Virtual base address of debug UART" + default 0xc881f000 if DEBUG_RV1108_UART2 + default 0xc8821000 if DEBUG_RV1108_UART1 + default 0xc8912000 if DEBUG_RV1108_UART0 default 0xe0000a00 if DEBUG_NETX_UART default 0xe0010fe0 if ARCH_RPC default 0xf0000be0 if ARCH_EBSA110 diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 65f4e2a4eb94..47d3a1ab08d2 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -151,6 +151,7 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000 # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. +machine-$(CONFIG_ARCH_ACTIONS) += actions machine-$(CONFIG_ARCH_ALPINE) += alpine machine-$(CONFIG_ARCH_ARTPEC) += artpec machine-$(CONFIG_ARCH_AT91) += at91 diff --git a/arch/arm/boot/compressed/efi-header.S b/arch/arm/boot/compressed/efi-header.S index 9d5dc4fda3c1..a17ca8d78656 100644 --- a/arch/arm/boot/compressed/efi-header.S +++ b/arch/arm/boot/compressed/efi-header.S @@ -17,14 +17,13 @@ @ there. .inst 'M' | ('Z' << 8) | (0x1310 << 16) @ tstne r0, #0x4d000 #else - mov r0, r0 + AR_CLASS( mov r0, r0 ) + M_CLASS( nop.w ) #endif .endm .macro __EFI_HEADER #ifdef CONFIG_EFI_STUB - b __efi_start - .set start_offset, __efi_start - start .org start + 0x3c @ diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 7c711ba61417..8a756870c238 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -130,19 +130,22 @@ start: .rept 7 __nop .endr - ARM( mov r0, r0 ) - ARM( b 1f ) - THUMB( badr r12, 1f ) - THUMB( bx r12 ) +#ifndef CONFIG_THUMB2_KERNEL + mov r0, r0 +#else + AR_CLASS( sub pc, pc, #3 ) @ A/R: switch to Thumb2 mode + M_CLASS( nop.w ) @ M: already in Thumb2 mode + .thumb +#endif + W(b) 1f .word _magic_sig @ Magic numbers to help the loader .word _magic_start @ absolute load/run zImage address .word _magic_end @ zImage end address .word 0x04030201 @ endianness flag - THUMB( .thumb ) -1: __EFI_HEADER - + __EFI_HEADER +1: ARM_BE8( setend be ) @ go BE8 if compiled for BE8 AR_CLASS( mrs r9, cpsr ) #ifdef CONFIG_ARM_VIRT_EXT diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9c5e1d944d1c..4b17f35dc9a7 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2835-rpi-b-plus.dtb \ bcm2835-rpi-a-plus.dtb \ bcm2836-rpi-2-b.dtb \ + bcm2837-rpi-3-b.dtb \ bcm2835-rpi-zero.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-asus-rt-ac56u.dtb \ @@ -204,7 +205,8 @@ dtb-$(CONFIG_ARCH_KEYSTONE) += \ keystone-k2hk-evm.dtb \ keystone-k2l-evm.dtb \ keystone-k2e-evm.dtb \ - keystone-k2g-evm.dtb + keystone-k2g-evm.dtb \ + keystone-k2g-ice.dtb dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-b3.dtb \ kirkwood-blackarmor-nas220.dtb \ @@ -363,6 +365,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-gw551x.dtb \ imx6dl-gw552x.dtb \ imx6dl-gw553x.dtb \ + imx6dl-gw560x.dtb \ imx6dl-gw5903.dtb \ imx6dl-gw5904.dtb \ imx6dl-hummingboard.dtb \ @@ -408,6 +411,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-gw551x.dtb \ imx6q-gw552x.dtb \ imx6q-gw553x.dtb \ + imx6q-gw560x.dtb \ imx6q-gw5903.dtb \ imx6q-gw5904.dtb \ imx6q-h100.dtb \ @@ -476,6 +480,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ imx7d-colibri-eval-v3.dtb \ imx7d-nitrogen7.dtb \ + imx7d-pico.dtb \ imx7d-sbc-imx7.dtb \ imx7d-sdb.dtb \ imx7d-sdb-sht11.dtb \ @@ -603,6 +608,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-bone.dtb \ am335x-boneblack.dtb \ am335x-boneblack-wireless.dtb \ + am335x-boneblue.dtb \ am335x-bonegreen.dtb \ am335x-bonegreen-wireless.dtb \ am335x-chiliboard.dtb \ @@ -663,6 +669,8 @@ dtb-$(CONFIG_ARCH_ORION5X) += \ orion5x-maxtor-shared-storage-2.dtb \ orion5x-netgear-wnr854t.dtb \ orion5x-rd88f5182-nas.dtb +dtb-$(CONFIG_ARCH_ACTIONS) += \ + owl-s500-guitar-bb-rev-b.dtb dtb-$(CONFIG_ARCH_PRIMA2) += \ prima2-evb.dtb dtb-$(CONFIG_ARCH_OXNAS) += \ @@ -701,9 +709,11 @@ dtb-$(CONFIG_ARCH_REALVIEW) += \ dtb-$(CONFIG_ARCH_RENESAS) += \ emev2-kzm9d.dtb \ r7s72100-genmai.dtb \ + r7s72100-gr-peach.dtb \ r7s72100-rskrza1.dtb \ r8a73a4-ape6evm.dtb \ r8a7740-armadillo800eva.dtb \ + r8a7743-iwg20d-q7.dtb \ r8a7743-sk-rzg1m.dtb \ r8a7745-sk-rzg1e.dtb \ r8a7778-bockw.dtb \ @@ -718,7 +728,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \ r8a7794-silk.dtb \ sh73a0-kzm9g.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ - rk1108-evb.dtb \ + rv1108-evb.dtb \ rk3036-evb.dtb \ rk3036-kylin.dtb \ rk3066a-bqcurie2.dtb \ @@ -790,9 +800,12 @@ dtb-$(CONFIG_ARCH_STI) += \ dtb-$(CONFIG_ARCH_STM32)+= \ stm32f429-disco.dtb \ stm32f469-disco.dtb \ + stm32f746-disco.dtb \ + stm32f769-disco.dtb \ stm32429i-eval.dtb \ stm32746g-eval.dtb \ - stm32h743i-eval.dtb + stm32h743i-eval.dtb \ + stm32h743i-disco.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-ba10-tvbox.dtb \ @@ -895,6 +908,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-bananapi-m2-plus.dtb \ sun8i-h3-beelink-x2.dtb \ sun8i-h3-nanopi-m1.dtb \ + sun8i-h3-nanopi-m1-plus.dtb \ sun8i-h3-nanopi-neo.dtb \ sun8i-h3-nanopi-neo-air.dtb \ sun8i-h3-orangepi-2.dtb \ @@ -905,7 +919,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-orangepi-plus.dtb \ sun8i-h3-orangepi-plus2e.dtb \ sun8i-r16-parrot.dtb \ - sun8i-v3s-licheepi-zero.dtb + sun8i-v3s-licheepi-zero.dtb \ + sun8i-v3s-licheepi-zero-dock.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb @@ -920,8 +935,7 @@ dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ tegra20-seaboard.dtb \ tegra20-tec.dtb \ tegra20-trimslice.dtb \ - tegra20-ventana.dtb \ - tegra20-whistler.dtb + tegra20-ventana.dtb dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-apalis-eval.dtb \ tegra30-beaver.dtb \ @@ -999,6 +1013,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \ armada-385-db-ap.dtb \ armada-385-linksys-caiman.dtb \ armada-385-linksys-cobra.dtb \ + armada-385-linksys-rango.dtb \ armada-385-linksys-shelby.dtb \ armada-385-synology-ds116.dtb \ armada-385-turris-omnia.dtb \ diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts index 5b1bf92d927c..888bfcd4a402 100644 --- a/arch/arm/boot/dts/aks-cdu.dts +++ b/arch/arm/boot/dts/aks-cdu.dts @@ -62,32 +62,36 @@ status = "okay"; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; - status = "okay"; - - bootstrap@0 { - label = "bootstrap"; - reg = <0x0 0x40000>; - }; - - uboot@40000 { - label = "uboot"; - reg = <0x40000 0x80000>; - }; - ubootenv@c0000 { - label = "ubootenv"; - reg = <0xc0000 0x40000>; - }; - kernel@100000 { - label = "kernel"; - reg = <0x100000 0x400000>; - }; - rootfs@500000 { - label = "rootfs"; - reg = <0x500000 0x7b00000>; + ebi: ebi@10000000 { + nand_controller: nand-controller { + nand: nand@3 { + partitions { + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x40000>; + }; + + uboot@40000 { + label = "uboot"; + reg = <0x40000 0x80000>; + }; + + ubootenv@c0000 { + label = "ubootenv"; + reg = <0xc0000 0x40000>; + }; + + kernel@100000 { + label = "kernel"; + reg = <0x100000 0x400000>; + }; + + rootfs@500000 { + label = "rootfs"; + reg = <0x500000 0x7b00000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index d42b98f15e8b..ec6052c521ef 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -255,7 +255,7 @@ }; at24@50 { - compatible = "at24,24c02"; + compatible = "atmel,24c02"; pagesize = <8>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts index c2bee452dab8..29782be07605 100644 --- a/arch/arm/boot/dts/am335x-base0033.dts +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -89,7 +89,7 @@ &i2c0 { eeprom: eeprom@50 { - compatible = "at,24c256"; + compatible = "atmel,24c256"; reg = <0x50>; }; }; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index bf6b26abe35b..1d154444dfef 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -232,7 +232,7 @@ }; baseboard_eeprom: baseboard_eeprom@50 { - compatible = "at,24c256"; + compatible = "atmel,24c256"; reg = <0x50>; #address-cells = <1>; @@ -251,7 +251,7 @@ clock-frequency = <100000>; cape_eeprom0: cape_eeprom0@54 { - compatible = "at,24c256"; + compatible = "atmel,24c256"; reg = <0x54>; #address-cells = <1>; #size-cells = <1>; @@ -261,7 +261,7 @@ }; cape_eeprom1: cape_eeprom1@55 { - compatible = "at,24c256"; + compatible = "atmel,24c256"; reg = <0x55>; #address-cells = <1>; #size-cells = <1>; @@ -271,7 +271,7 @@ }; cape_eeprom2: cape_eeprom2@56 { - compatible = "at,24c256"; + compatible = "atmel,24c256"; reg = <0x56>; #address-cells = <1>; #size-cells = <1>; @@ -281,7 +281,7 @@ }; cape_eeprom3: cape_eeprom3@57 { - compatible = "at,24c256"; + compatible = "atmel,24c256"; reg = <0x57>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts index 105bd10655f7..83f49f616b19 100644 --- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts +++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts @@ -97,6 +97,11 @@ pinctrl-names = "default"; pinctrl-0 = <&uart3_pins &bt_pins>; status = "okay"; + + bluetooth { + compatible = "ti,wl1835-st"; + enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; + }; }; &gpio3 { diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 935ed17d22e4..d154d3133c16 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -22,7 +22,7 @@ * BeagleBone Blacks have PG 2.0 silicon which is guaranteed * to support 1GHz OPP so enable it for PG 2.0 on this board. */ - oppnitro@1000000000 { + oppnitro-1000000000 { opp-supported-hw = <0x06 0x0100>; }; }; diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts new file mode 100644 index 000000000000..cdc1b2be792f --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblue.dts @@ -0,0 +1,460 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "TI AM335x BeagleBone Blue"; + compatible = "ti,am335x-bone-blue", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + chosen { + stdout-path = &uart0; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + compatible = "gpio-leds"; + + usr_0_led { + label = "beaglebone:green:usr0"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + usr_1_led { + label = "beaglebone:green:usr1"; + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + usr_2_led { + label = "beaglebone:green:usr2"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + + usr_3_led { + label = "beaglebone:green:usr3"; + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + wifi_led { + label = "wifi"; + gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "phy0assoc"; + }; + + red_led { + label = "red"; + gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green_led { + label = "green"; + gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + batt_1_led { + label = "bat25"; + gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + batt_2_led { + label = "bat50"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + batt_3_led { + label = "bat75"; + gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + batt_4_led { + label = "bat100"; + gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + vmmcsd_fixed: fixedregulator0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + wlan_en_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us= <70000>; + + /* WL_EN */ + gpio = <&gpio3 9 0>; + enable-active-high; + }; +}; + +&am33xx_pinmux { + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */ + AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */ + AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */ + AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */ + AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] - WIFI_LED */ + AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE7) /* (R7) gpmc_advn_ale.gpio2[2] - P8.7, LED_RED, GP1_PIN_5 */ + AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE7) /* (T7) gpmc_oen_ren.gpio2[3] - P8.8, LED_GREEN, GP1_PIN_6 */ + AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE7) /* (U12) gpmc_ad11.gpio0[27] - P8.17, BATT_LED_1 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7) /* (T5) lcd_data15.gpio0[11] - P8.32, BATT_LED_2 */ + AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE7) /* (V6) gpmc_csn0.gpio1[29] - P8.26, BATT_LED_3 */ + AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) /* (T11) gpmc_ad10.gpio0[26] - P8.14, BATT_LED_4 */ + + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */ + AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* (E15) uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* (E16) uart0_txd.uart0_txd */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* (U9) gpmc_csn1.mmc1_clk */ + AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* (V9) gpmc_csn2.mmc1_cmd */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* (U7) gpmc_ad0.mmc1_dat0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* (V7) gpmc_ad1.mmc1_dat1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* (R8) gpmc_ad2.mmc1_dat2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* (T8) gpmc_ad3.mmc1_dat3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* (U8) gpmc_ad4.mmc1_dat4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* (V8) gpmc_ad5.mmc1_dat5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* (R9) gpmc_ad6.mmc1_dat6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* (T9) gpmc_ad7.mmc1_dat7 */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE6) /* (L15) gmii1_rxd1.mmc2_clk */ + AM33XX_IOPAD(0x914, PIN_INPUT_PULLUP | MUX_MODE6) /* (J16) gmii1_txen.mmc2_cmd */ + AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE5) /* (J17) gmii1_rxdv.mmc2_dat0 */ + AM33XX_IOPAD(0x91c, PIN_INPUT_PULLUP | MUX_MODE5) /* (J18) gmii1_txd3.mmc2_dat1 */ + AM33XX_IOPAD(0x920, PIN_INPUT_PULLUP | MUX_MODE5) /* (K15) gmii1_txd2.mmc2_dat2 */ + AM33XX_IOPAD(0x908, PIN_INPUT_PULLUP | MUX_MODE5) /* (H16) gmii1_col.mmc2_dat3 */ + >; + }; + + bt_pins: pinmux_bt_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLUP | MUX_MODE7) /* (K17) gmii1_txd0.gpio0[28] - BT_EN */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */ + AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */ + AM33XX_IOPAD(0x948, PIN_INPUT | MUX_MODE3) /* (M17) mdio_data.uart3_ctsn */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* (M18) mdio_clk.uart3_rtsn */ + >; + }; + + wl18xx_pins: pinmux_wl18xx_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] - WL_EN */ + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (H18) rmii1_refclk.gpio0[29] - WL_IRQ */ + AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLUP | MUX_MODE7) /* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "peripheral"; + interrupts-extended = <&intc 18 &tps 0>; + interrupt-names = "mc", "vbus"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + + baseboard_eeprom: baseboard_eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + + #address-cells = <1>; + #size-cells = <1>; + baseboard_data: baseboard_data@0 { + reg = <0 0x100>; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + status = "okay"; + clock-frequency = <400000>; + + mpu9250@68 { + compatible = "invensense,mpu9250"; + reg = <0x68>; + interrupt-parent = <&gpio3>; + interrupts = <21 GPIO_ACTIVE_LOW>; + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + ax8975@c { + compatible = "ak,ak8975"; + reg = <0x0c>; + }; + }; + }; + + pressure@76 { + compatible = "bosch,bmp280"; + reg = <0x76>; + }; +}; + +/include/ "tps65217.dtsi" + +&tps { + interrupts = <7>; /* NMI */ + interrupt-parent = <&intc>; + + charger { + interrupts = <0>, <1>; + interrupt-names = "USB", "AC"; + status = "okay"; + }; + + pwrbutton { + interrupts = <2>; + status = "okay"; + }; + + regulators { + dcdc1_reg: regulator@0 { + regulator-name = "vdds_dpr"; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1351500>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-name = "vio,vrtc,vdds"; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-name = "vdd_3v3aux"; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-name = "vdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-name = "vdd_3v3a"; + regulator-always-on; + }; + }; +}; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; +}; + +&mmc2 { + status = "okay"; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; +}; + +&mmc3 { + dmas = <&edma_xbar 12 0 1 + &edma_xbar 13 0 2>; + dma-names = "tx", "rx"; + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + non-removable; + cap-power-off-card; + ti,needs-special-hs-handling; + keep-power-in-suspend; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins &wl18xx_pins>; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio0>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&tscadc { + status = "okay"; + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins &bt_pins>; + status = "okay"; + + bluetooth { + compatible = "ti,wl1835-st"; + enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; + }; +}; + +&aes { + status = "okay"; +}; + +&sham { + status = "okay"; +}; + +&rtc { + system-power-controller; + clocks = <&clk_32768_ck>, <&clkdiv32k_ick>; + clock-names = "ext-clk", "int-clk"; +}; + +&gpio3 { + ls_buf_en { + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "LS_BUF_EN"; + }; +}; diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts index 9d1a0fd555f3..57731f0daf10 100644 --- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts +++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts @@ -97,6 +97,11 @@ pinctrl-names = "default"; pinctrl-0 = <&uart3_pins &bt_pins>; status = "okay"; + + bluetooth { + compatible = "ti,wl1835-st"; + enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + }; }; &gpio1 { diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts index 807494bc722b..946d7069f417 100644 --- a/arch/arm/boot/dts/am335x-nano.dts +++ b/arch/arm/boot/dts/am335x-nano.dts @@ -224,7 +224,7 @@ }; eeprom@53 { - compatible = "microchip,24c02"; + compatible = "microchip,24c02", "atmel,24c02"; reg = <0x53>; pagesize = <8>; }; diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts index 30e2f8770aaf..03c7d77023c6 100644 --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -67,7 +67,7 @@ }; eeprom: eeprom@50 { - compatible = "at,24c256"; + compatible = "atmel,24c256"; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index 14533ff6d0ad..428a25e952b0 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -138,7 +138,7 @@ }; i2c_rtc: rtc@68 { - compatible = "rv4162"; + compatible = "microcrystal,rv4162"; reg = <0x68>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts index bf8727a19ece..4f6a286ea293 100644 --- a/arch/arm/boot/dts/am335x-shc.dts +++ b/arch/arm/boot/dts/am335x-shc.dts @@ -188,7 +188,7 @@ }; at24@50 { - compatible = "at24,24c32"; + compatible = "atmel,24c32"; pagesize = <32>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index c5d2589c55fc..1bcc60424ecd 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -220,7 +220,7 @@ mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE7) /* uart0_rtsn.gpio1_9 */ >; }; @@ -280,10 +280,6 @@ AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE7) /* nKbdReset - gpmc_ad13.gpio1_13 */ AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7) /* nDispReset - gpmc_ad14.gpio1_14 */ AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* USB1_enPower - gpmc_a1.gpio1_17 */ - /* AVR Programming - SPI Bus (bit bang) - Screen and Keyboard */ - AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE7) /* Kbd/Disp/BattMOSI spi0_d0.gpio0_3 */ - AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE7) /* Kbd/Disp/BattMISO spi0_d1.gpio0_4 */ - AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE7) /* Kbd/Disp/BattSCLK spi0_clk.gpio0_2 */ /* PDI Bus - Battery system */ AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7) /* nBattReset gpmc_a0.gpio1_16 */ AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7) /* BattPDIData gpmc_ad15.gpio1_15 */ @@ -309,7 +305,7 @@ }; eeprom: eeprom@50 { - compatible = "at,24c256"; + compatible = "atmel,24c256"; reg = <0x50>; }; @@ -384,7 +380,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; bus-width = <4>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; vmmc-supply = <&vmmcsd_fixed>; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 9e242943dcec..7d7ca054c557 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -64,64 +64,64 @@ * because the can not be enabled simultaneously on a * single SoC. */ - opp50@300000000 { + opp50-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <950000 931000 969000>; opp-supported-hw = <0x06 0x0010>; opp-suspend; }; - opp100@275000000 { + opp100-275000000 { opp-hz = /bits/ 64 <275000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0x01 0x00FF>; opp-suspend; }; - opp100@300000000 { + opp100-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0x06 0x0020>; opp-suspend; }; - opp100@500000000 { + opp100-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0x01 0xFFFF>; }; - opp100@600000000 { + opp100-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0x06 0x0040>; }; - opp120@600000000 { + opp120-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <1200000 1176000 1224000>; opp-supported-hw = <0x01 0xFFFF>; }; - opp120@720000000 { + opp120-720000000 { opp-hz = /bits/ 64 <720000000>; opp-microvolt = <1200000 1176000 1224000>; opp-supported-hw = <0x06 0x0080>; }; - oppturbo@720000000 { + oppturbo-720000000 { opp-hz = /bits/ 64 <720000000>; opp-microvolt = <1260000 1234800 1285200>; opp-supported-hw = <0x01 0xFFFF>; }; - oppturbo@800000000 { + oppturbo-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1260000 1234800 1285200>; opp-supported-hw = <0x06 0x0100>; }; - oppnitro@1000000000 { + oppnitro-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <1325000 1298500 1351500>; opp-supported-hw = <0x04 0x0200>; @@ -431,7 +431,6 @@ &edma_xbar 25 0 0>; dma-names = "tx", "rx"; interrupts = <64>; - interrupt-parent = <&intc>; reg = <0x48060000 0x1000>; status = "disabled"; }; @@ -444,7 +443,6 @@ &edma 3 0>; dma-names = "tx", "rx"; interrupts = <28>; - interrupt-parent = <&intc>; reg = <0x481d8000 0x1000>; status = "disabled"; }; @@ -454,7 +452,6 @@ ti,hwmods = "mmc3"; ti,needs-special-reset; interrupts = <29>; - interrupt-parent = <&intc>; reg = <0x47810000 0x1000>; status = "disabled"; }; @@ -853,7 +850,6 @@ 0x4a101200 0x100>; #address-cells = <1>; #size-cells = <1>; - interrupt-parent = <&intc>; /* * c0_rx_thresh_pend * c0_rx_pend @@ -908,7 +904,6 @@ lcdc: lcdc@4830e000 { compatible = "ti,am33xx-tilcdc"; reg = <0x4830e000 0x1000>; - interrupt-parent = <&intc>; interrupts = <36>; ti,hwmods = "lcdc"; status = "disabled"; @@ -917,7 +912,6 @@ tscadc: tscadc@44e0d000 { compatible = "ti,am3359-tscadc"; reg = <0x44e0d000 0x1000>; - interrupt-parent = <&intc>; interrupts = <16>; ti,hwmods = "adc_tsc"; status = "disabled"; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 176e09e9a45e..e5b061469bf8 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -59,32 +59,32 @@ compatible = "operating-points-v2-ti-cpu"; syscon = <&scm_conf>; - opp50@300000000 { + opp50-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <950000 931000 969000>; opp-supported-hw = <0xFF 0x01>; opp-suspend; }; - opp100@600000000 { + opp100-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0xFF 0x04>; }; - opp120@720000000 { + opp120-720000000 { opp-hz = /bits/ 64 <720000000>; opp-microvolt = <1200000 1176000 1224000>; opp-supported-hw = <0xFF 0x08>; }; - oppturbo@800000000 { + oppturbo-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1260000 1234800 1285200>; opp-supported-hw = <0xFF 0x10>; }; - oppnitro@1000000000 { + oppnitro-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <1325000 1298500 1351500>; opp-supported-hw = <0xFF 0x20>; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 397e98b7e246..29a538ecd405 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -549,8 +549,6 @@ dcdc3: regulator-dcdc3 { regulator-name = "vdcdc3"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; regulator-state-mem { diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index c1f7f9336e64..5e364473067f 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -339,7 +339,7 @@ clock-frequency = <400000>; at24@50 { - compatible = "at24,24c256"; + compatible = "atmel,24c256"; pagesize = <64>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 4dc54bee2f36..2c6bf0684f50 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -451,8 +451,6 @@ dcdc3: regulator-dcdc3 { regulator-name = "vdds_ddr"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; regulator-state-mem { @@ -511,7 +509,7 @@ }; at24@50 { - compatible = "at24,24c256"; + compatible = "atmel,24c256"; pagesize = <64>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 9acd4ccdec4e..54f40f370011 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -442,8 +442,6 @@ dcdc3: regulator-dcdc3 { regulator-name = "vdcdc3"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; }; @@ -477,7 +475,7 @@ }; at24@50 { - compatible = "at24,24c256"; + compatible = "atmel,24c256"; pagesize = <64>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index d1d73b725f47..430be5829f8f 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -833,4 +833,40 @@ ti,bit-shift = <23>; reg = <0x4100>; }; + + clkout2_src_mux_ck: clkout2_src_mux_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>, + <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>, + <&dpll_mpu_m2_ck>, <&dpll_extdev_ck>; + reg = <0x4108>; + }; + + clkout2_pre_div_ck: clkout2_pre_div_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&clkout2_src_mux_ck>; + ti,bit-shift = <4>; + ti,max-div = <8>; + reg = <0x4108>; + }; + + clkout2_post_div_ck: clkout2_post_div_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&clkout2_pre_div_ck>; + ti,bit-shift = <8>; + ti,max-div = <32>; + ti,index-power-of-two; + reg = <0x4108>; + }; + + clkout2_ck: clkout2_ck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkout2_post_div_ck>; + ti,bit-shift = <16>; + reg = <0x4108>; + }; }; diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index ad68d1eb3bc3..7b207835b2d1 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -79,3 +79,20 @@ id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>; }; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index 8350b4b34b08..9da6d83ca185 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -91,3 +91,23 @@ &pcie1 { gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; }; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; + mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index 585d792a8fdd..fdfe5b16b806 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -388,7 +388,7 @@ }; eeprom: eeprom@50 { - compatible = "at,24c32"; + compatible = "atmel,24c32"; reg = <0x50>; }; }; diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index 9cc372b9fb9b..26ade8c0a960 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -83,25 +83,44 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; + ebi: ebi@10000000 { status = "okay"; - barebox@0 { - label = "barebox"; - reg = <0x0 0x58000>; - }; - - u_boot_env@58000 { - label = "u_boot_env"; - reg = <0x58000 0x8000>; - }; - - ubi@60000 { - label = "ubi"; - reg = <0x60000 0x1FA0000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + barebox@0 { + label = "barebox"; + reg = <0x0 0x58000>; + }; + + u_boot_env@58000 { + label = "u_boot_env"; + reg = <0x58000 0x8000>; + }; + + ubi@60000 { + label = "ubi"; + reg = <0x60000 0x1FA0000>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index cc011c8bc36b..f9cf1273f35e 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -137,29 +137,38 @@ }; gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18100 0x40>, <0x181c0 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <82>, <83>, <84>, <85>; + clocks = <&coreclk 0>; }; gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18140 0x40>, <0x181c8 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <87>, <88>, <89>, <90>; + clocks = <&coreclk 0>; }; gpio2: gpio@18180 { - compatible = "marvell,orion-gpio"; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; reg = <0x18180 0x40>; ngpios = <2>; gpio-controller; diff --git a/arch/arm/boot/dts/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/armada-385-linksys-caiman.dts index f3cee918d285..ee669ae61011 100644 --- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts +++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts @@ -44,71 +44,128 @@ model = "Linksys WRT1200AC"; compatible = "linksys,caiman", "linksys,armada385", "marvell,armada385", "marvell,armada380"; +}; + +&expander0 { + wan_amber@0 { + label = "caiman:amber:wan"; + reg = <0x0>; + }; + + wan_white@1 { + label = "caiman:white:wan"; + reg = <0x1>; + }; + + wlan_2g@2 { + label = "caiman:white:wlan_2g"; + reg = <0x2>; + }; + + wlan_5g@3 { + label = "caiman:white:wlan_5g"; + reg = <0x3>; + }; + + usb2@5 { + label = "caiman:white:usb2"; + reg = <0x5>; + }; + + usb3_1@6 { + label = "caiman:white:usb3_1"; + reg = <0x6>; + }; + + usb3_2@7 { + label = "caiman:white:usb3_2"; + reg = <0x7>; + }; + + wps_white@8 { + label = "caiman:white:wps"; + reg = <0x8>; + }; + + wps_amber@9 { + label = "caiman:amber:wps"; + reg = <0x9>; + }; +}; + +&gpio_leds { + power { + label = "caiman:white:power"; + }; + + sata { + label = "caiman:white:sata"; + }; +}; + +&nand { + /* 128MiB */ + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x200000>; /* 2MiB */ + read-only; + }; + + partition@100000 { + label = "u_env"; + reg = <0x200000 0x40000>; /* 256KiB */ + }; + + partition@140000 { + label = "s_env"; + reg = <0x240000 0x40000>; /* 256KiB */ + }; + + partition@900000 { + label = "devinfo"; + reg = <0x900000 0x100000>; /* 1MiB */ + read-only; + }; + + /* kernel1 overlaps with rootfs1 by design */ + partition@a00000 { + label = "kernel1"; + reg = <0xa00000 0x2800000>; /* 40MiB */ + }; + + partition@1000000 { + label = "rootfs1"; + reg = <0x1000000 0x2200000>; /* 34MiB */ + }; + + /* kernel2 overlaps with rootfs2 by design */ + partition@3200000 { + label = "kernel2"; + reg = <0x3200000 0x2800000>; /* 40MiB */ + }; + + partition@3800000 { + label = "rootfs2"; + reg = <0x3800000 0x2200000>; /* 34MiB */ + }; + + /* + * 38MiB, last MiB is for the BBT, not writable + */ + partition@5a00000 { + label = "syscfg"; + reg = <0x5a00000 0x2600000>; + }; - soc { - internal-regs{ - i2c@11000 { - - pca9635@68 { - #address-cells = <1>; - #size-cells = <0>; - - wan_amber@0 { - label = "caiman:amber:wan"; - reg = <0x0>; - }; - - wan_white@1 { - label = "caiman:white:wan"; - reg = <0x1>; - }; - - wlan_2g@2 { - label = "caiman:white:wlan_2g"; - reg = <0x2>; - }; - - wlan_5g@3 { - label = "caiman:white:wlan_5g"; - reg = <0x3>; - }; - - usb2@5 { - label = "caiman:white:usb2"; - reg = <0x5>; - }; - - usb3_1@6 { - label = "caiman:white:usb3_1"; - reg = <0x6>; - }; - - usb3_2@7 { - label = "caiman:white:usb3_2"; - reg = <0x7>; - }; - - wps_white@8 { - label = "caiman:white:wps"; - reg = <0x8>; - }; - - wps_amber@9 { - label = "caiman:amber:wps"; - reg = <0x9>; - }; - }; - }; - }; - }; - - gpio-leds { - power { - label = "caiman:white:power"; - }; - - sata { - label = "caiman:white:sata"; - }; + /* + * Unused area between "s_env" and "devinfo". + * Moved here because otherwise the renumbered + * partitions would break the bootloader + * supplied bootargs + */ + partition@180000 { + label = "unused_area"; + reg = <0x280000 0x680000>; /* 6.5MiB */ }; }; diff --git a/arch/arm/boot/dts/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/armada-385-linksys-cobra.dts index 111071860559..5169ca89c55a 100644 --- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts +++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts @@ -44,71 +44,128 @@ model = "Linksys WRT1900ACv2"; compatible = "linksys,cobra", "linksys,armada385", "marvell,armada385", "marvell,armada380"; +}; + +&expander0 { + wan_amber@0 { + label = "cobra:amber:wan"; + reg = <0x0>; + }; + + wan_white@1 { + label = "cobra:white:wan"; + reg = <0x1>; + }; + + wlan_2g@2 { + label = "cobra:white:wlan_2g"; + reg = <0x2>; + }; + + wlan_5g@3 { + label = "cobra:white:wlan_5g"; + reg = <0x3>; + }; + + usb2@5 { + label = "cobra:white:usb2"; + reg = <0x5>; + }; + + usb3_1@6 { + label = "cobra:white:usb3_1"; + reg = <0x6>; + }; + + usb3_2@7 { + label = "cobra:white:usb3_2"; + reg = <0x7>; + }; + + wps_white@8 { + label = "cobra:white:wps"; + reg = <0x8>; + }; + + wps_amber@9 { + label = "cobra:amber:wps"; + reg = <0x9>; + }; +}; + +&gpio_leds { + power { + label = "cobra:white:power"; + }; + + sata { + label = "cobra:white:sata"; + }; +}; + +&nand { + /* 128MiB */ + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x200000>; /* 2MiB */ + read-only; + }; + + partition@100000 { + label = "u_env"; + reg = <0x200000 0x40000>; /* 256KiB */ + }; + + partition@140000 { + label = "s_env"; + reg = <0x240000 0x40000>; /* 256KiB */ + }; + + partition@900000 { + label = "devinfo"; + reg = <0x900000 0x100000>; /* 1MiB */ + read-only; + }; + + /* kernel1 overlaps with rootfs1 by design */ + partition@a00000 { + label = "kernel1"; + reg = <0xa00000 0x2800000>; /* 40MiB */ + }; + + partition@1000000 { + label = "rootfs1"; + reg = <0x1000000 0x2200000>; /* 34MiB */ + }; + + /* kernel2 overlaps with rootfs2 by design */ + partition@3200000 { + label = "kernel2"; + reg = <0x3200000 0x2800000>; /* 40MiB */ + }; + + partition@3800000 { + label = "rootfs2"; + reg = <0x3800000 0x2200000>; /* 34MiB */ + }; + + /* + * 38MiB, last MiB is for the BBT, not writable + */ + partition@5a00000 { + label = "syscfg"; + reg = <0x5a00000 0x2600000>; + }; - soc { - internal-regs{ - i2c@11000 { - - pca9635@68 { - #address-cells = <1>; - #size-cells = <0>; - - wan_amber@0 { - label = "cobra:amber:wan"; - reg = <0x0>; - }; - - wan_white@1 { - label = "cobra:white:wan"; - reg = <0x1>; - }; - - wlan_2g@2 { - label = "cobra:white:wlan_2g"; - reg = <0x2>; - }; - - wlan_5g@3 { - label = "cobra:white:wlan_5g"; - reg = <0x3>; - }; - - usb2@5 { - label = "cobra:white:usb2"; - reg = <0x5>; - }; - - usb3_1@6 { - label = "cobra:white:usb3_1"; - reg = <0x6>; - }; - - usb3_2@7 { - label = "cobra:white:usb3_2"; - reg = <0x7>; - }; - - wps_white@8 { - label = "cobra:white:wps"; - reg = <0x8>; - }; - - wps_amber@9 { - label = "cobra:amber:wps"; - reg = <0x9>; - }; - }; - }; - }; - }; - - gpio-leds { - power { - label = "cobra:white:power"; - }; - - sata { - label = "cobra:white:sata"; - }; + /* + * Unused area between "s_env" and "devinfo". + * Moved here because otherwise the renumbered + * partitions would break the bootloader + * supplied bootargs + */ + partition@180000 { + label = "unused_area"; + reg = <0x280000 0x680000>; /* 6.5MiB */ }; }; diff --git a/arch/arm/boot/dts/armada-385-linksys-rango.dts b/arch/arm/boot/dts/armada-385-linksys-rango.dts new file mode 100644 index 000000000000..da8a0f3d432b --- /dev/null +++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts @@ -0,0 +1,203 @@ +/* + * Device Tree file for the Linksys WRT3200ACM (Rango) + * + * Copyright (C) 2016 Imre Kaloz <kaloz@openwrt.org> + * + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "armada-385-linksys.dtsi" + +/ { + model = "Linksys WRT3200ACM"; + compatible = "linksys,rango", "linksys,armada385", "marvell,armada385", + "marvell,armada380"; +}; + +&expander0 { + wan_amber@0 { + label = "rango:amber:wan"; + reg = <0x0>; + }; + + wan_white@1 { + label = "rango:white:wan"; + reg = <0x1>; + }; + + usb2@5 { + label = "rango:white:usb2"; + reg = <0x5>; + }; + + usb3_1@6 { + label = "rango:white:usb3_1"; + reg = <0x6>; + }; + + usb3_2@7 { + label = "rango:white:usb3_2"; + reg = <0x7>; + }; + + wps_white@8 { + label = "rango:white:wps"; + reg = <0x8>; + }; + + wps_amber@9 { + label = "rango:amber:wps"; + reg = <0x9>; + }; +}; + +&gpio_leds { + power { + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + label = "rango:white:power"; + }; + + sata { + gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + label = "rango:white:sata"; + }; + + wlan_2g { + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + label = "rango:white:wlan_2g"; + }; + + wlan_5g { + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + label = "rango:white:wlan_5g"; + }; +}; + +&gpio_leds_pins { + marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56"; +}; + +&nand { + /* AMD/Spansion S34ML02G2 256MiB, OEM Layout */ + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x200000>; /* 2MiB */ + read-only; + }; + + partition@200000 { + label = "u_env"; + reg = <0x200000 0x20000>; /* 128KiB */ + }; + + partition@220000 { + label = "s_env"; + reg = <0x220000 0x40000>; /* 256KiB */ + }; + + partition@7e0000 { + label = "devinfo"; + reg = <0x7e0000 0x40000>; /* 256KiB */ + read-only; + }; + + partition@820000 { + label = "sysdiag"; + reg = <0x820000 0x1e0000>; /* 1920KiB */ + read-only; + }; + + /* kernel1 overlaps with rootfs1 by design */ + partition@a00000 { + label = "kernel1"; + reg = <0xa00000 0x5000000>; /* 80MiB */ + }; + + partition@1000000 { + label = "rootfs1"; + reg = <0x1000000 0x4a00000>; /* 74MiB */ + }; + + /* kernel2 overlaps with rootfs2 by design */ + partition@5a00000 { + label = "kernel2"; + reg = <0x5a00000 0x5000000>; /* 80MiB */ + }; + + partition@6000000 { + label = "rootfs2"; + reg = <0x6000000 0x4a00000>; /* 74MiB */ + }; + + /* + * 86MiB, last MiB is for the BBT, not writable + */ + partition@aa00000 { + label = "syscfg"; + reg = <0xaa00000 0x5600000>; + }; + + /* + * Unused area between "s_env" and "devinfo". + * Moved here because otherwise the renumbered + * partitions would break the bootloader + * supplied bootargs + */ + partition@180000 { + label = "unused_area"; + reg = <0x260000 0x5c0000>; /* 5.75MiB */ + }; +}; + +&sdhci { + pinctrl-names = "default"; + pinctrl-0 = <&sdhci_pins>; + no-1-8-v; + non-removable; + wp-inverted; + bus-width = <8>; + status = "okay"; +}; + +&usb3_1_vbus { + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; +}; + +&usb3_1_vbus_pins { + marvell,pins = "mpp44"; +}; diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts index c7a8ddd7f9a5..94aa35bc0bff 100644 --- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts +++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts @@ -44,71 +44,128 @@ model = "Linksys WRT1900ACS"; compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385", "marvell,armada380"; +}; + +&expander0 { + wan_amber@0 { + label = "shelby:amber:wan"; + reg = <0x0>; + }; + + wan_white@1 { + label = "shelby:white:wan"; + reg = <0x1>; + }; + + wlan_2g@2 { + label = "shelby:white:wlan_2g"; + reg = <0x2>; + }; + + wlan_5g@3 { + label = "shelby:white:wlan_5g"; + reg = <0x3>; + }; + + usb2@5 { + label = "shelby:white:usb2"; + reg = <0x5>; + }; + + usb3_1@6 { + label = "shelby:white:usb3_1"; + reg = <0x6>; + }; + + usb3_2@7 { + label = "shelby:white:usb3_2"; + reg = <0x7>; + }; + + wps_white@8 { + label = "shelby:white:wps"; + reg = <0x8>; + }; + + wps_amber@9 { + label = "shelby:amber:wps"; + reg = <0x9>; + }; +}; + +&gpio_leds { + power { + label = "shelby:white:power"; + }; + + sata { + label = "shelby:white:sata"; + }; +}; + +&nand { + /* 128MiB */ + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x200000>; /* 2MiB */ + read-only; + }; + + partition@100000 { + label = "u_env"; + reg = <0x200000 0x40000>; /* 256KiB */ + }; + + partition@140000 { + label = "s_env"; + reg = <0x240000 0x40000>; /* 256KiB */ + }; + + partition@900000 { + label = "devinfo"; + reg = <0x900000 0x100000>; /* 1MiB */ + read-only; + }; + + /* kernel1 overlaps with rootfs1 by design */ + partition@a00000 { + label = "kernel1"; + reg = <0xa00000 0x2800000>; /* 40MiB */ + }; + + partition@1000000 { + label = "rootfs1"; + reg = <0x1000000 0x2200000>; /* 34MiB */ + }; + + /* kernel2 overlaps with rootfs2 by design */ + partition@3200000 { + label = "kernel2"; + reg = <0x3200000 0x2800000>; /* 40MiB */ + }; + + partition@3800000 { + label = "rootfs2"; + reg = <0x3800000 0x2200000>; /* 34MiB */ + }; + + /* + * 38MiB, last MiB is for the BBT, not writable + */ + partition@5a00000 { + label = "syscfg"; + reg = <0x5a00000 0x2600000>; + }; - soc { - internal-regs{ - i2c@11000 { - - pca9635@68 { - #address-cells = <1>; - #size-cells = <0>; - - wan_amber@0 { - label = "shelby:amber:wan"; - reg = <0x0>; - }; - - wan_white@1 { - label = "shelby:white:wan"; - reg = <0x1>; - }; - - wlan_2g@2 { - label = "shelby:white:wlan_2g"; - reg = <0x2>; - }; - - wlan_5g@3 { - label = "shelby:white:wlan_5g"; - reg = <0x3>; - }; - - usb2@5 { - label = "shelby:white:usb2"; - reg = <0x5>; - }; - - usb3_1@6 { - label = "shelby:white:usb3_1"; - reg = <0x6>; - }; - - usb3_2@7 { - label = "shelby:white:usb3_2"; - reg = <0x7>; - }; - - wps_white@8 { - label = "shelby:white:wps"; - reg = <0x8>; - }; - - wps_amber@9 { - label = "shelby:amber:wps"; - reg = <0x9>; - }; - }; - }; - }; - }; - - gpio-leds { - power { - label = "shelby:white:power"; - }; - - sata { - label = "shelby:white:sata"; - }; + /* + * Unused area between "s_env" and "devinfo". + * Moved here because otherwise the renumbered + * partitions would break the bootloader + * supplied bootargs + */ + partition@180000 { + label = "unused_area"; + reg = <0x280000 0x680000>; /* 6.5MiB */ }; }; diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 2306c45685b1..e1f355ffc8f7 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -52,7 +52,7 @@ memory { device_type = "memory"; - reg = <0x00000000 0x20000000>; /* 512 MB */ + reg = <0x00000000 0x20000000>; /* 512 MiB */ }; soc { @@ -61,255 +61,45 @@ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; - - internal-regs { - i2c@11000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - status = "okay"; - - tmp421@4c { - compatible = "ti,tmp421"; - reg = <0x4c>; - }; - - pca9635@68 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nxp,pca9635"; - reg = <0x68>; - }; - }; - - /* J10: VCC, NC, RX, NC, TX, GND */ - serial@12000 { - status = "okay"; - }; - - ethernet@70000 { - status = "okay"; - phy-mode = "rgmii-id"; - buffer-manager = <&bm>; - bm,pool-long = <2>; - bm,pool-short = <3>; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - ethernet@34000 { - status = "okay"; - phy-mode = "sgmii"; - buffer-manager = <&bm>; - bm,pool-long = <0>; - bm,pool-short = <1>; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - mdio@72004 { - status = "okay"; - - switch@0 { - compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "lan4"; - }; - - port@1 { - reg = <1>; - label = "lan3"; - }; - - port@2 { - reg = <2>; - label = "lan2"; - }; - - port@3 { - reg = <3>; - label = "lan1"; - }; - - port@4 { - reg = <4>; - label = "wan"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - ethernet = <ð2>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; - }; - - sata@a8000 { - status = "okay"; - }; - - bm@c8000 { - status = "okay"; - }; - - /* USB part of the eSATA/USB 2.0 port */ - usb@58000 { - status = "okay"; - }; - - usb3@f8000 { - status = "okay"; - usb-phy = <&usb3_phy>; - }; - - flash@d0000 { - status = "okay"; - num-cs = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x200000>; /* 2MB */ - read-only; - }; - - partition@100000 { - label = "u_env"; - reg = <0x200000 0x40000>; /* 256KB */ - }; - - partition@140000 { - label = "s_env"; - reg = <0x240000 0x40000>; /* 256KB */ - }; - - partition@900000 { - label = "devinfo"; - reg = <0x900000 0x100000>; /* 1MB */ - read-only; - }; - - /* kernel1 overlaps with rootfs1 by design */ - partition@a00000 { - label = "kernel1"; - reg = <0xa00000 0x2800000>; /* 40MB */ - }; - - partition@1000000 { - label = "rootfs1"; - reg = <0x1000000 0x2200000>; /* 34MB */ - }; - - /* kernel2 overlaps with rootfs2 by design */ - partition@3200000 { - label = "kernel2"; - reg = <0x3200000 0x2800000>; /* 40MB */ - }; - - partition@3800000 { - label = "rootfs2"; - reg = <0x3800000 0x2200000>; /* 34MB */ - }; - - /* - * 38MB, last MB is for the BBT, not writable - */ - partition@5a00000 { - label = "syscfg"; - reg = <0x5a00000 0x2600000>; - }; - - /* - * Unused area between "s_env" and "devinfo". - * Moved here because otherwise the renumbered - * partitions would break the bootloader - * supplied bootargs - */ - partition@180000 { - label = "unused_area"; - reg = <0x280000 0x680000>; /* 6.5MB */ - }; - }; - }; - - bm-bppi { - status = "okay"; - }; - - pcie-controller { - status = "okay"; - - pcie@1,0 { - /* Marvell 88W8864, 5GHz-only */ - status = "okay"; - }; - - pcie@2,0 { - /* Marvell 88W8864, 2GHz-only */ - status = "okay"; - }; - }; }; - usb3_phy: usb3_phy { + usb3_1_phy: usb3_1-phy { compatible = "usb-nop-xceiv"; - vcc-supply = <®_xhci0_vbus>; + vcc-supply = <&usb3_1_vbus>; }; - reg_xhci0_vbus: xhci0-vbus { + usb3_1_vbus: usb3_1-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; - pinctrl-0 = <&xhci0_vbus_pins>; - regulator-name = "xhci0-vbus"; + pinctrl-0 = <&usb3_1_vbus_pins>; + regulator-name = "usb3_1-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>; }; - gpio_keys { + gpio_keys: gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&keys_pin>; + pinctrl-0 = <&gpio_keys_pins>; pinctrl-names = "default"; - button@1 { + wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; }; - button@2 { + reset { label = "Factory Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; }; }; - gpio-leds { + gpio_leds: gpio-leds { compatible = "gpio-leds"; - pinctrl-0 = <&power_led_pin &sata_led_pin>; + pinctrl-0 = <&gpio_leds_pins>; pinctrl-names = "default"; power { @@ -323,21 +113,83 @@ linux,default-trigger = "disk-activity"; }; }; +}; - dsa@0 { - status = "disabled"; +&ahci0 { + status = "okay"; +}; + +&bm { + status = "okay"; +}; - compatible = "marvell,dsa"; - #address-cells = <2>; +&bm_bppi { + status = "okay"; +}; + +ð0 { + status = "okay"; + phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +ð2 { + status = "okay"; + phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <3>; + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + tmp421@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; + + expander0: pca9635@68 { + #address-cells = <1>; #size-cells = <0>; + compatible = "nxp,pca9635"; + reg = <0x68>; + }; +}; + +&nand { + /* 128MiB or 256MiB */ + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; +}; - dsa,ethernet = <ð2>; - dsa,mii-bus = <&mdio>; +&mdio { + status = "okay"; - switch@0 { + switch@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + ports { #address-cells = <1>; #size-cells = <0>; - reg = <0x0 0>; /* MDIO address 0, switch 0 in tree */ port@0 { reg = <0>; @@ -367,28 +219,45 @@ port@5 { reg = <5>; label = "cpu"; + ethernet = <ð2>; + + fixed-link { + speed = <1000>; + full-duplex; + }; }; }; }; }; +&pciec { + status = "okay"; +}; + +&pcie1 { + /* Marvell 88W8864, 5GHz-only */ + status = "okay"; +}; + +&pcie2 { + /* Marvell 88W8864, 2GHz-only */ + status = "okay"; +}; + &pinctrl { - keys_pin: keys-pin { + gpio_keys_pins: gpio-keys-pins { + /* mpp24: wps, mpp29: reset */ marvell,pins = "mpp24", "mpp29"; marvell,function = "gpio"; }; - power_led_pin: power-led-pin { - marvell,pins = "mpp55"; - marvell,function = "gpio"; - }; - - sata_led_pin: sata-led-pin { - marvell,pins = "mpp54"; + gpio_leds_pins: gpio-leds-pins { + /* mpp54: sata, mpp55: power */ + marvell,pins = "mpp54", "mpp55"; marvell,function = "gpio"; }; - xhci0_vbus_pins: xhci0-vbus-pins { + usb3_1_vbus_pins: usb3_1-vbus-pins { marvell,pins = "mpp50"; marvell,function = "gpio"; }; @@ -397,3 +266,18 @@ &spi0 { status = "disabled"; }; + +&uart0 { + /* J10: VCC, NC, RX, NC, TX, GND */ + status = "okay"; +}; + +&usb0 { + /* USB part of the eSATA/USB 2.0 port */ + status = "okay"; +}; + +&usb3_1 { + status = "okay"; + usb-phy = <&usb3_1_phy>; +}; diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index 28eede180e4f..be16ce39fb3d 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -171,7 +171,7 @@ /* leds device (in STM32F0) at address 0x2b */ eeprom@54 { - compatible = "at,24c64"; + compatible = "atmel,24c64"; reg = <0x54>; /* The EEPROM contains data for bootloader. diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 8b165c31de1e..af31f5d6c0e5 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -312,31 +312,39 @@ }; gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18100 0x40>, <0x181c0 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&coreclk 0>; }; gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18140 0x40>, <0x181c8 0x08>; + reg-names = "gpio", "pwm"; ngpios = <28>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&coreclk 0>; }; systemc: system-controller@18200 { diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi index 84cc232a29e9..be22ec5236ac 100644 --- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi @@ -311,6 +311,10 @@ reg = <0x20a00 0x2d0>, <0x21070 0x58>; }; +&rtc { + status = "disabled"; +}; + &timer { compatible = "marvell,armada-xp-timer"; clocks = <&coreclk 2>, <&refclk>; diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi index 51de91b31a9d..bc9f824020eb 100644 --- a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi +++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi @@ -87,4 +87,5 @@ &pp0 { compatible = "marvell,prestera-98dx4251"; + interrupts = <33>, <34>, <35>, <36>; }; diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index 9efcf59c9b44..6d705f518254 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -308,13 +308,11 @@ }; }; - gpio_fan { + pwm_fan { /* SUNON HA4010V4-0000-C99 */ - compatible = "gpio-fan"; - gpios = <&gpio0 24 0>; - gpio-fan,speed-map = <0 0 - 4500 1>; + compatible = "pwm-fan"; + pwms = <&gpio0 24 4000>; }; dsa { diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 07c5090ecd29..9f25814077f2 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -202,25 +202,33 @@ internal-regs { gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18100 0x40>, <0x181c0 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <82>, <83>, <84>, <85>; + clocks = <&coreclk 0>; }; gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18140 0x40>, <0x181c8 0x08>; + reg-names = "gpio", "pwm"; ngpios = <17>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <87>, <88>, <89>; + clocks = <&coreclk 0>; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 64e936ae7b22..2bfe07aebf1a 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -285,29 +285,38 @@ internal-regs { gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18100 0x40>, <0x181c0 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <82>, <83>, <84>, <85>; + clocks = <&coreclk 0>; }; gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18140 0x40>, <0x181c8 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <87>, <88>, <89>, <90>; + clocks = <&coreclk 0>; }; gpio2: gpio@18180 { - compatible = "marvell,orion-gpio"; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; reg = <0x18180 0x40>; ngpios = <3>; gpio-controller; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index d1383dde43eb..6c33935f7074 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -323,29 +323,38 @@ internal-regs { gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18100 0x40>, <0x181c0 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <82>, <83>, <84>, <85>; + clocks = <&coreclk 0>; }; gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18140 0x40>, <0x181c8 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <87>, <88>, <89>, <90>; + clocks = <&coreclk 0>; }; gpio2: gpio@18180 { - compatible = "marvell,orion-gpio"; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; reg = <0x18180 0x40>; ngpios = <3>; gpio-controller; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index 8c6bc29eb7f6..8a04c7e2d818 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -886,13 +886,12 @@ }; timer: timer@1e782000 { + /* This timer is a Faraday FTTMR010 derivative */ compatible = "aspeed,ast2400-timer"; reg = <0x1e782000 0x90>; - // The moxart_timer driver registers only one - // interrupt and assumes it's for timer 1 - //interrupts = <16 17 18 35 36 37 38 39>; - interrupts = <16>; + interrupts = <16 17 18 35 36 37 38 39>; clocks = <&clk_apb>; + clock-names = "PCLK"; }; wdt1: wdt@1e785000 { diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index a0bea4a6ec77..9cffe347b828 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -993,13 +993,12 @@ }; timer: timer@1e782000 { + /* This timer is a Faraday FTTMR010 derivative */ compatible = "aspeed,ast2400-timer"; reg = <0x1e782000 0x90>; - // The moxart_timer driver registers only one - // interrupt and assumes it's for timer 1 - //interrupts = <16 17 18 35 36 37 38 39>; - interrupts = <16>; + interrupts = <16 17 18 35 36 37 38 39>; clocks = <&clk_apb>; + clock-names = "PCLK"; }; diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi index 02d8ef43de3a..89cde175154e 100644 --- a/arch/arm/boot/dts/at91-cosino.dtsi +++ b/arch/arm/boot/dts/at91-cosino.dtsi @@ -82,38 +82,61 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - atmel,has-pmecc; /* Enable PMECC */ - atmel,pmecc-cap = <4>; - atmel,pmecc-sector-size = <512>; - nand-on-flash-bbt; + ebi: ebi@10000000 { + pinctrl-0 = <&pinctrl_ebi_addr_nand + &pinctrl_ebi_data_0_7>; + pinctrl-names = "default"; status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; - - uboot@40000 { - label = "u-boot"; - reg = <0x40000 0x80000>; - }; - - ubootenv@c0000 { - label = "U-Boot Env"; - reg = <0xc0000 0x140000>; - }; - - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x600000>; - }; - - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x0f800000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_oe_we + &pinctrl_nand_cs + &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + uboot@40000 { + label = "u-boot"; + reg = <0x40000 0x80000>; + }; + + ubootenv@c0000 { + label = "U-Boot Env"; + reg = <0xc0000 0x140000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts index b4f147c193fd..1f31df846d61 100644 --- a/arch/arm/boot/dts/at91-kizbox.dts +++ b/arch/arm/boot/dts/at91-kizbox.dts @@ -59,19 +59,39 @@ status = "okay"; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; + ebi: ebi@10000000 { status = "okay"; - bootstrap@0 { - label = "bootstrap"; - reg = <0x0 0x20000>; - }; - - ubi@20000 { - label = "ubi"; - reg = <0x20000 0x7fe0000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; + }; + + ubi@20000 { + label = "ubi"; + reg = <0x20000 0x7fe0000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts index 50a14568f094..4372c0287c1c 100644 --- a/arch/arm/boot/dts/at91-kizbox2.dts +++ b/arch/arm/boot/dts/at91-kizbox2.dts @@ -141,23 +141,40 @@ status = "okay"; }; - nand0: nand@60000000 { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - atmel,has-pmecc; - atmel,pmecc-cap = <4>; - atmel,pmecc-sector-size = <512>; - nand-on-flash-bbt; + ebi: ebi@10000000 { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; status = "okay"; - bootstrap@0 { - label = "bootstrap"; - reg = <0x0 0x20000>; - }; + nand_controller: nand-controller { + status = "okay"; + + nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; + }; - ubi@20000 { - label = "ubi"; - reg = <0x20000 0x7fe0000>; + ubi@20000 { + label = "ubi"; + reg = <0x20000 0x7fe0000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts index 9682d105d4d8..33238fcb6d0b 100644 --- a/arch/arm/boot/dts/at91-kizboxmini.dts +++ b/arch/arm/boot/dts/at91-kizboxmini.dts @@ -68,6 +68,49 @@ status = "okay"; }; + ebi: ebi@10000000 { + pinctrl-0 = <&pinctrl_ebi_addr_nand + &pinctrl_ebi_data_0_7>; + pinctrl-names = "default"; + status = "okay"; + + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_oe_we + &pinctrl_nand_cs + &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; + }; + + ubi@20000 { + label = "ubi"; + reg = <0x20000 0x7fe0000>; + }; + }; + }; + }; + }; + nand0: nand@40000000 { nand-bus-width = <8>; nand-ecc-mode = "hw"; @@ -77,15 +120,6 @@ nand-on-flash-bbt; status = "okay"; - bootstrap@0 { - label = "bootstrap"; - reg = <0x0 0x20000>; - }; - - ubi@20000 { - label = "ubi"; - reg = <0x20000 0x7fe0000>; - }; }; }; diff --git a/arch/arm/boot/dts/at91-linea.dtsi b/arch/arm/boot/dts/at91-linea.dtsi index 0721c8472509..87e5090fb4c4 100644 --- a/arch/arm/boot/dts/at91-linea.dtsi +++ b/arch/arm/boot/dts/at91-linea.dtsi @@ -31,19 +31,30 @@ status = "okay"; eeprom@51 { - compatible = "st,24c64"; + compatible = "st,24c64", "atmel,24c64"; reg = <0x51>; pagesize = <32>; }; }; -&nand0 { +&ebi { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; status = "okay"; +}; + - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - atmel,has-pmecc; - atmel,pmecc-cap = <4>; - atmel,pmecc-sector-size = <512>; - nand-on-flash-bbt; +&nand_controller { + status = "okay"; + + nand: nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + }; }; diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts index 8f019184fccf..f46352790a41 100644 --- a/arch/arm/boot/dts/at91-qil_a9260.dts +++ b/arch/arm/boot/dts/at91-qil_a9260.dts @@ -107,50 +107,69 @@ status = "okay"; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; + ebi: ebi@10000000 { status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x20000>; - }; - - barebox@20000 { - label = "barebox"; - reg = <0x20000 0x40000>; - }; - - bareboxenv@60000 { - label = "bareboxenv"; - reg = <0x60000 0x20000>; - }; - - bareboxenv2@80000 { - label = "bareboxenv2"; - reg = <0x80000 0x20000>; - }; - - oftree@a0000 { - label = "oftree"; - reg = <0xa0000 0x20000>; - }; - - kernel@c0000 { - label = "kernel"; - reg = <0xc0000 0x400000>; - }; - - rootfs@4c0000 { - label = "rootfs"; - reg = <0x4c0000 0x7800000>; - }; - - data@7cc0000 { - label = "data"; - reg = <0x7cc0000 0x8340000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x20000>; + }; + + bareboxenv2@80000 { + label = "bareboxenv2"; + reg = <0x80000 0x20000>; + }; + + oftree@a0000 { + label = "oftree"; + reg = <0xa0000 0x20000>; + }; + + kernel@c0000 { + label = "kernel"; + reg = <0xc0000 0x400000>; + }; + + rootfs@4c0000 { + label = "rootfs"; + reg = <0x4c0000 0x7800000>; + }; + + data@7cc0000 { + label = "data"; + reg = <0x7cc0000 0x8340000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 0bef9e0b89c6..2e2c3d1a1fa2 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -56,10 +56,6 @@ stdout-path = "serial0:115200n8"; }; - memory { - reg = <0x20000000 0x80000>; - }; - clocks { slow_xtal { clock-frequency = <32768>; @@ -227,6 +223,10 @@ }; }; + pwm0: pwm@f802c000 { + status = "okay"; + }; + flx0: flexcom@f8034000 { atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */ @@ -258,6 +258,12 @@ status = "okay"; }; + can0: can@f8054000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_default>; + status = "okay"; + }; + uart3: serial@fc008000 { atmel,use-dma-rx; atmel,use-dma-tx; @@ -322,6 +328,18 @@ bias-disable; }; + pinctrl_can0_default: can0_default { + pinmux = <PIN_PC10__CANTX0>, + <PIN_PC11__CANRX0>; + bias-disable; + }; + + pinctrl_can1_default: can1_default { + pinmux = <PIN_PC26__CANTX1>, + <PIN_PC27__CANRX1>; + bias-disable; + }; + pinctrl_charger_chglev: charger_chglev { pinmux = <PIN_PA12__GPIO>; bias-disable; @@ -469,6 +487,12 @@ }; }; + + can1: can@fc050000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index 5a53fcf542ab..3af088d2cba7 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -235,46 +235,6 @@ }; }; - nand0: nand@60000000 { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - atmel,has-pmecc; - atmel,pmecc-cap = <4>; - atmel,pmecc-sector-size = <512>; - nand-on-flash-bbt; - status = "okay"; - - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; - - bootloader@40000 { - label = "bootloader"; - reg = <0x40000 0x80000>; - }; - - bootloaderenv@c0000 { - label = "bootloader env"; - reg = <0xc0000 0xc0000>; - }; - - dtb@180000 { - label = "device tree"; - reg = <0x180000 0x80000>; - }; - - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x600000>; - }; - - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x0f800000>; - }; - }; - usb0: gadget@00500000 { atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; /* PE9, conflicts with A9 */ pinctrl-names = "default"; @@ -294,6 +254,63 @@ usb2: ehci@00700000 { status = "okay"; }; + + ebi: ebi@10000000 { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; + status = "okay"; + + nand_controller: nand-controller { + status = "okay"; + + nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; + }; + }; }; vcc_mmc0_reg: fixedregulator_mmc0 { diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi index b5a5a91bc2ef..b813fdfa2842 100644 --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi @@ -75,7 +75,7 @@ reg = <0>; clocks = <&clk20m>; interrupt-parent = <&pioE>; - interrupts = <6 GPIO_ACTIVE_LOW>; + interrupts = <6 IRQ_TYPE_EDGE_RISING>; spi-max-frequency = <10000000>; }; @@ -84,7 +84,7 @@ reg = <1>; clocks = <&clk20m>; interrupt-parent = <&pioE>; - interrupts = <7 GPIO_ACTIVE_LOW>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; spi-max-frequency = <10000000>; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 5ab14cedb1db..cf712444b2c2 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -190,41 +190,60 @@ status = "okay"; }; - nand0: nand@80000000 { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - nand-on-flash-bbt; - atmel,has-pmecc; + ebi: ebi@10000000 { + pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe + &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy + &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; - - bootloader@40000 { - label = "bootloader"; - reg = <0x40000 0x80000>; - }; - - bootloaderenv@c0000 { - label = "bootloader env"; - reg = <0xc0000 0xc0000>; - }; - - dtb@180000 { - label = "device tree"; - reg = <0x180000 0x80000>; - }; - - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x600000>; - }; + nand_controller: nand-controller { + status = "okay"; - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x0f800000>; + nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index f8b96cef5e1a..bae5248f126e 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -236,41 +236,60 @@ status = "okay"; }; - nand0: nand@80000000 { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - nand-on-flash-bbt; - atmel,has-pmecc; + ebi: ebi@10000000 { + pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe + &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy + &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; - - bootloader@40000 { - label = "bootloader"; - reg = <0x40000 0x80000>; - }; - - bootloaderenv@c0000 { - label = "bootloader env"; - reg = <0xc0000 0xc0000>; - }; - - dtb@180000 { - label = "device tree"; - reg = <0x180000 0x80000>; - }; - - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x600000>; - }; + nand_controller: nand-controller { + status = "okay"; - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x0f800000>; + nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts index 498fba3e52b5..5f29010cdbd8 100644 --- a/arch/arm/boot/dts/at91-tse850-3.dts +++ b/arch/arm/boot/dts/at91-tse850-3.dts @@ -161,45 +161,51 @@ }; }; -&nand0 { - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; +&nand { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; - barebox@40000 { - label = "bootloader"; - reg = <0x40000 0x60000>; - }; + barebox@40000 { + label = "bootloader"; + reg = <0x40000 0x60000>; + }; - bareboxenv@c0000 { - label = "bareboxenv"; - reg = <0xc0000 0x40000>; - }; + bareboxenv@c0000 { + label = "bareboxenv"; + reg = <0xc0000 0x40000>; + }; - bareboxenv2@100000 { - label = "bareboxenv2"; - reg = <0x100000 0x40000>; - }; + bareboxenv2@100000 { + label = "bareboxenv2"; + reg = <0x100000 0x40000>; + }; - oftree@180000 { - label = "oftree"; - reg = <0x180000 0x20000>; - }; + oftree@180000 { + label = "oftree"; + reg = <0x180000 0x20000>; + }; - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x500000>; - }; + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x500000>; + }; - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x0f800000>; - }; + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; - ovlfs@10000000 { - label = "ovlfs"; - reg = <0x10000000 0x10000000>; + ovlfs@10000000 { + label = "ovlfs"; + reg = <0x10000000 0x10000000>; + }; }; }; @@ -239,7 +245,7 @@ }; eeprom@50 { - compatible = "nxp,24c02"; + compatible = "nxp,24c02", "atmel,24c02"; reg = <0x50>; pagesize = <16>; }; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 9e035b21e1b6..6582f3cca929 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -99,6 +99,16 @@ reg = <0xffffea00 0x200>; }; + smc: smc@ffffec00 { + compatible = "atmel,at91sam9260-smc", "syscon"; + reg = <0xffffec00 0x200>; + }; + + matrix: matrix@ffffee00 { + compatible = "atmel,at91sam9260-matrix", "syscon"; + reg = <0xffffee00 0x200>; + }; + pmc: pmc@fffffc00 { compatible = "atmel,at91sam9260-pmc", "syscon"; reg = <0xfffffc00 0x100>; @@ -522,10 +532,14 @@ }; nand { - pinctrl_nand: nand-0 { + pinctrl_nand_rb: nand-rb-0 { + atmel,pins = + <AT91_PIOC 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_nand_cs: nand-cs-0 { atmel,pins = - <AT91_PIOC 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC13 gpio RDY pin pull_up */ - AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PC14 gpio enable pin pull_up */ + <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; }; }; @@ -985,24 +999,6 @@ }; }; - nand0: nand@40000000 { - compatible = "atmel,at91rm9200-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x40000000 0x10000000 - 0xffffe800 0x200 - >; - atmel,nand-addr-offset = <21>; - atmel,nand-cmd-offset = <22>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioC 13 GPIO_ACTIVE_HIGH - &pioC 14 GPIO_ACTIVE_HIGH - 0 - >; - status = "disabled"; - }; - usb0: ohci@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; @@ -1011,6 +1007,33 @@ clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; + + ebi: ebi@10000000 { + compatible = "atmel,at91sam9260-ebi"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&smc>; + atmel,matrix = <&matrix>; + reg = <0x10000000 0x80000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x20000000 0x10000000 + 0x2 0x0 0x30000000 0x10000000 + 0x3 0x0 0x40000000 0x10000000 + 0x4 0x0 0x50000000 0x10000000 + 0x5 0x0 0x60000000 0x10000000 + 0x6 0x0 0x70000000 0x10000000 + 0x7 0x0 0x80000000 0x10000000>; + clocks = <&mck>; + status = "disabled"; + + nand_controller: nand-controller { + compatible = "atmel,at91sam9260-nand-controller"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + status = "disabled"; + }; + }; }; i2c-gpio-0 { diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 7e80acda8f69..a05353f96151 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -91,20 +91,31 @@ status = "disabled"; }; - nand0: nand@40000000 { - compatible = "atmel,at91rm9200-nand"; - #address-cells = <1>; + ebi: ebi@10000000 { + compatible = "atmel,at91sam9261-ebi"; + #address-cells = <2>; #size-cells = <1>; - reg = <0x40000000 0x10000000>; - atmel,nand-addr-offset = <22>; - atmel,nand-cmd-offset = <21>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - - gpios = <&pioC 15 GPIO_ACTIVE_HIGH>, - <&pioC 14 GPIO_ACTIVE_HIGH>, - <0>; + atmel,smc = <&smc>; + atmel,matrix = <&matrix>; + reg = <0x10000000 0x80000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x20000000 0x10000000 + 0x2 0x0 0x30000000 0x10000000 + 0x3 0x0 0x40000000 0x10000000 + 0x4 0x0 0x50000000 0x10000000 + 0x5 0x0 0x60000000 0x10000000 + 0x6 0x0 0x70000000 0x10000000 + 0x7 0x0 0x80000000 0x10000000>; + clocks = <&mck>; status = "disabled"; + + nand_controller: nand-controller { + compatible = "atmel,at91sam9261-nand-controller"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + status = "disabled"; + }; }; apb { @@ -262,6 +273,11 @@ reg = <0xffffea00 0x200>; }; + smc: smc@ffffec00 { + compatible = "atmel,at91sam9260-smc", "syscon"; + reg = <0xffffec00 0x200>; + }; + matrix: matrix@ffffee00 { compatible = "atmel,at91sam9261-matrix", "syscon"; reg = <0xffffee00 0x200>; @@ -362,9 +378,13 @@ }; nand { - pinctrl_nand: nand-0 { + pinctrl_nand_rb: nand-rb-0 { + atmel,pins = + <AT91_PIOC 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_nand_cs: nand-cs-0 { atmel,pins = - <AT91_PIOC 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>, <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; }; }; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index 55bd51f07fa6..157e1493e6eb 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -68,40 +68,59 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; + ebi: ebi@10000000 { status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; - - bootloader@40000 { - label = "bootloader"; - reg = <0x40000 0x80000>; - }; - - bootloaderenv@c0000 { - label = "bootloader env"; - reg = <0xc0000 0xc0000>; - }; - - dtb@180000 { - label = "device tree"; - reg = <0x180000 0x80000>; - }; - - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x600000>; - }; - - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x0f800000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioC 15 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index a1888f6d892b..ed4b564f8de5 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -361,11 +361,26 @@ reg = <0xffffe200 0x200>; }; + smc0: smc@ffffe400 { + compatible = "atmel,at91sam9260-smc", "syscon"; + reg = <0xffffe400 0x200>; + }; + ramc1: ramc@ffffe800 { compatible = "atmel,at91sam9260-sdramc"; reg = <0xffffe800 0x200>; }; + smc1: smc@ffffea00 { + compatible = "atmel,at91sam9260-smc", "syscon"; + reg = <0xffffea00 0x200>; + }; + + matrix: matrix@ffffec00 { + compatible = "atmel,at91sam9263-matrix", "syscon"; + reg = <0xffffec00 0x200>; + }; + pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; @@ -472,10 +487,14 @@ }; nand { - pinctrl_nand: nand-0 { + pinctrl_nand_rb: nand-rb-0 { + atmel,pins = + <AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_nand_cs: nand-cs-0 { atmel,pins = - <AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PA22 gpio RDY pin pull_up*/ - AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD15 gpio enable pin pull_up */ + <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; }; }; @@ -991,24 +1010,6 @@ status = "disabled"; }; - nand0: nand@40000000 { - compatible = "atmel,at91rm9200-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x40000000 0x10000000 - 0xffffe000 0x200 - >; - atmel,nand-addr-offset = <21>; - atmel,nand-cmd-offset = <22>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioA 22 GPIO_ACTIVE_HIGH - &pioD 15 GPIO_ACTIVE_HIGH - 0 - >; - status = "disabled"; - }; - usb0: ohci@00a00000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; @@ -1017,6 +1018,52 @@ clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; + + ebi0: ebi@10000000 { + compatible = "atmel,at91sam9263-ebi0"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&smc0>; + atmel,matrix = <&matrix>; + reg = <0x10000000 0x80000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x20000000 0x10000000 + 0x2 0x0 0x30000000 0x10000000 + 0x3 0x0 0x40000000 0x10000000 + 0x4 0x0 0x50000000 0x10000000 + 0x5 0x0 0x60000000 0x10000000>; + clocks = <&mck>; + status = "disabled"; + + nand_controller0: nand-controller { + compatible = "atmel,at91sam9260-nand-controller"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + status = "disabled"; + }; + }; + + ebi1: ebi@70000000 { + compatible = "atmel,at91sam9263-ebi1"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&smc1>; + atmel,matrix = <&matrix>; + reg = <0x80000000 0x20000000>; + ranges = <0x0 0x0 0x80000000 0x10000000 + 0x1 0x0 0x90000000 0x10000000>; + clocks = <&mck>; + status = "disabled"; + + nand_controller1: nand-controller { + compatible = "atmel,at91sam9260-nand-controller"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + status = "disabled"; + }; + }; }; i2c-gpio-0 { diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 127cc42e9e29..10a0925da10e 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -125,50 +125,69 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt = <1>; + ebi0: ebi@10000000 { status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x20000>; - }; - - barebox@20000 { - label = "barebox"; - reg = <0x20000 0x40000>; - }; - - bareboxenv@60000 { - label = "bareboxenv"; - reg = <0x60000 0x20000>; - }; - - bareboxenv2@80000 { - label = "bareboxenv2"; - reg = <0x80000 0x20000>; - }; - - oftree@80000 { - label = "oftree"; - reg = <0xa0000 0x20000>; - }; - - kernel@a0000 { - label = "kernel"; - reg = <0xc0000 0x400000>; - }; - - rootfs@4a0000 { - label = "rootfs"; - reg = <0x4c0000 0x7800000>; - }; - - data@7ca0000 { - label = "data"; - reg = <0x7cc0000 0x8340000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x20000>; + }; + + bareboxenv2@80000 { + label = "bareboxenv2"; + reg = <0x80000 0x20000>; + }; + + oftree@80000 { + label = "oftree"; + reg = <0xa0000 0x20000>; + }; + + kernel@a0000 { + label = "kernel"; + reg = <0xc0000 0x400000>; + }; + + rootfs@4a0000 { + label = "rootfs"; + reg = <0x4c0000 0x7800000>; + }; + + data@7ca0000 { + label = "data"; + reg = <0x7cc0000 0x8340000>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 27847a47c108..ac9a1511e239 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -123,50 +123,69 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; + ebi: ebi@10000000 { status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x20000>; - }; - - barebox@20000 { - label = "barebox"; - reg = <0x20000 0x40000>; - }; - - bareboxenv@60000 { - label = "bareboxenv"; - reg = <0x60000 0x20000>; - }; - - bareboxenv2@80000 { - label = "bareboxenv2"; - reg = <0x80000 0x20000>; - }; - - oftree@80000 { - label = "oftree"; - reg = <0xa0000 0x20000>; - }; - - kernel@a0000 { - label = "kernel"; - reg = <0xc0000 0x400000>; - }; - - rootfs@4a0000 { - label = "rootfs"; - reg = <0x4c0000 0x7800000>; - }; - - data@7ca0000 { - label = "data"; - reg = <0x7cc0000 0x8340000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x20000>; + }; + + bareboxenv2@80000 { + label = "bareboxenv2"; + reg = <0x80000 0x20000>; + }; + + oftree@80000 { + label = "oftree"; + reg = <0xa0000 0x20000>; + }; + + kernel@a0000 { + label = "kernel"; + reg = <0xc0000 0x400000>; + }; + + rootfs@4a0000 { + label = "rootfs"; + reg = <0x4c0000 0x7800000>; + }; + + data@7ca0000 { + label = "data"; + reg = <0x7cc0000 0x8340000>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index e567d5fd3f9d..a4808c4fbc05 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -113,6 +113,16 @@ clock-names = "ddrck"; }; + smc: smc@ffffe800 { + compatible = "atmel,at91sam9260-smc", "syscon"; + reg = <0xffffe800 0x200>; + }; + + matrix: matrix@ffffea00 { + compatible = "atmel,at91sam9g45-matrix", "syscon"; + reg = <0xffffea00 0x200>; + }; + pmc: pmc@fffffc00 { compatible = "atmel,at91sam9g45-pmc", "syscon"; reg = <0xfffffc00 0x100>; @@ -601,10 +611,14 @@ }; nand { - pinctrl_nand: nand-0 { + pinctrl_nand_rb: nand-rb-0 { atmel,pins = - <AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC8 gpio RDY pin pull_up*/ - AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PC14 gpio enable pin pull_up */ + <AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_nand_cs: nand-cs-0 { + atmel,pins = + <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; }; }; @@ -1278,25 +1292,6 @@ status = "disabled"; }; - nand0: nand@40000000 { - compatible = "atmel,at91rm9200-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x40000000 0x10000000 - 0xffffe200 0x200 - >; - atmel,nand-addr-offset = <21>; - atmel,nand-cmd-offset = <22>; - atmel,nand-has-dma; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioC 8 GPIO_ACTIVE_HIGH - &pioC 14 GPIO_ACTIVE_HIGH - 0 - >; - status = "disabled"; - }; - usb0: ohci@00700000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; @@ -1314,6 +1309,31 @@ clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; + + ebi: ebi@10000000 { + compatible = "atmel,at91sam9g45-ebi"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&smc>; + atmel,matrix = <&matrix>; + reg = <0x10000000 0x80000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x20000000 0x10000000 + 0x2 0x0 0x30000000 0x10000000 + 0x3 0x0 0x40000000 0x10000000 + 0x4 0x0 0x50000000 0x10000000 + 0x5 0x0 0x60000000 0x10000000>; + clocks = <&mck>; + status = "disabled"; + + nand_controller: nand-controller { + compatible = "atmel,at91sam9g45-nand-controller"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + status = "disabled"; + }; + }; }; i2c-gpio-0 { diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 2400c99134f7..2522c3308305 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -245,25 +245,44 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; + ebi: ebi@10000000 { status = "okay"; - boot@0 { - label = "bootstrap/uboot/kernel"; - reg = <0x0 0x400000>; - }; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; - rootfs@400000 { - label = "rootfs"; - reg = <0x400000 0x3C00000>; - }; + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioC 8 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + label = "bootstrap/uboot/kernel"; + reg = <0x0 0x400000>; + }; - data@4000000 { - label = "data"; - reg = <0x4000000 0xC000000>; + rootfs@400000 { + label = "rootfs"; + reg = <0x400000 0x3C00000>; + }; + + data@4000000 { + label = "data"; + reg = <0x4000000 0xC000000>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index f43d7695352d..06516d02d351 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -89,6 +89,17 @@ atmel,external-irqs = <31>; }; + matrix: matrix@ffffde00 { + compatible = "atmel,at91sam9n12-matrix", "syscon"; + reg = <0xffffde00 0x100>; + }; + + pmecc: ecc-engine@ffffe000 { + compatible = "atmel,at91sam9g45-pmecc"; + reg = <0xffffe000 0x600>, + <0xffffe600 0x200>; + }; + ramc0: ramc@ffffe800 { compatible = "atmel,at91sam9g45-ddramc"; reg = <0xffffe800 0x200>; @@ -96,6 +107,11 @@ clock-names = "ddrck"; }; + smc: smc@ffffea00 { + compatible = "atmel,at91sam9260-smc", "syscon"; + reg = <0xffffea00 0x200>; + }; + pmc: pmc@fffffc00 { compatible = "atmel,at91sam9n12-pmc", "syscon"; reg = <0xfffffc00 0x200>; @@ -627,10 +643,14 @@ }; nand { - pinctrl_nand: nand-0 { + pinctrl_nand_rb: nand-rb-0 { atmel,pins = - <AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD5 gpio RDY pin pull_up*/ - AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD4 gpio enable pin pull_up */ + <AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_nand_cs: nand-cs-0 { + atmel,pins = + <AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; }; }; @@ -998,28 +1018,6 @@ }; }; - nand0: nand@40000000 { - compatible = "atmel,at91rm9200-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = < 0x40000000 0x10000000 - 0xffffe000 0x00000600 - 0xffffe600 0x00000200 - 0x00108000 0x00018000 - >; - atmel,pmecc-lookup-table-offset = <0x0 0x8000>; - atmel,nand-addr-offset = <21>; - atmel,nand-cmd-offset = <22>; - atmel,nand-has-dma; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioD 5 GPIO_ACTIVE_HIGH - &pioD 4 GPIO_ACTIVE_HIGH - 0 - >; - status = "disabled"; - }; - usb0: ohci@00500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; @@ -1028,6 +1026,32 @@ clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; + + ebi: ebi@10000000 { + compatible = "atmel,at91sam9x5-ebi"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&smc>; + atmel,matrix = <&matrix>; + reg = <0x10000000 0x60000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x20000000 0x10000000 + 0x2 0x0 0x30000000 0x10000000 + 0x3 0x0 0x40000000 0x10000000 + 0x4 0x0 0x50000000 0x10000000 + 0x5 0x0 0x60000000 0x10000000>; + clocks = <&mck>; + status = "disabled"; + + nand_controller: nand-controller { + compatible = "atmel,at91sam9g45-nand-controller"; + ecc-engine = <&pmecc>; + #address-cells = <2>; + #size-cells = <1>; + ranges; + status = "disabled"; + }; + }; }; i2c-gpio-0 { diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 626c67d66626..5bea8c59b115 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -147,14 +147,26 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - atmel,has-pmecc; - atmel,pmecc-cap = <2>; - atmel,pmecc-sector-size = <512>; - nand-on-flash-bbt; + ebi: ebi@10000000 { status = "okay"; + + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-ecc-strength = <2>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + }; + }; }; usb0: ohci@00500000 { diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index f4c129a98f17..7768342a6638 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -92,21 +92,29 @@ status = "disabled"; }; - nand0: nand@40000000 { - compatible = "atmel,at91rm9200-nand"; - #address-cells = <1>; + ebi: ebi@10000000 { + compatible = "atmel,at91sam9rl-ebi"; + #address-cells = <2>; #size-cells = <1>; - reg = <0x40000000 0x10000000>, - <0xffffe800 0x200>; - atmel,nand-addr-offset = <21>; - atmel,nand-cmd-offset = <22>; - atmel,nand-has-dma; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioD 17 GPIO_ACTIVE_HIGH>, - <&pioB 6 GPIO_ACTIVE_HIGH>, - <0>; + atmel,smc = <&smc>; + atmel,matrix = <&matrix>; + reg = <0x10000000 0x80000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x20000000 0x10000000 + 0x2 0x0 0x30000000 0x10000000 + 0x3 0x0 0x40000000 0x10000000 + 0x4 0x0 0x50000000 0x10000000 + 0x5 0x0 0x60000000 0x10000000>; + clocks = <&mck>; status = "disabled"; + + nand_controller: nand-controller { + compatible = "atmel,at91sam9g45-nand-controller"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + status = "disabled"; + }; }; apb { @@ -364,6 +372,16 @@ reg = <0xffffea00 0x200>; }; + smc: smc@ffffec00 { + compatible = "atmel,at91sam9260-smc", "syscon"; + reg = <0xffffec00 0x200>; + }; + + matrix: matrix@ffffee00 { + compatible = "atmel,at91sam9rl-matrix", "syscon"; + reg = <0xffffee00 0x200>; + }; + aic: interrupt-controller@fffff000 { #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; @@ -443,6 +461,14 @@ }; }; + ebi { + pinctrl_ebi_addr_nand: ebi-addr-0 { + atmel,pins = + <AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + fb { pinctrl_fb: fb-0 { atmel,pins = @@ -507,28 +533,21 @@ }; nand { - pinctrl_nand: nand-0 { + pinctrl_nand_rb: nand-rb-0 { atmel,pins = - <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>, - <AT91_PIOB 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; }; - pinctrl_nand0_ale_cle: nand_ale_cle-0 { + pinctrl_nand_cs: nand-cs-0 { atmel,pins = - <AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>, - <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; + <AT91_PIOB 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; }; - pinctrl_nand0_oe_we: nand_oe_we-0 { + pinctrl_nand_oe_we: nand-oe-we-0 { atmel,pins = <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE>, <AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; - - pinctrl_nand0_cs: nand_cs-0 { - atmel,pins = - <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; - }; }; pwm0 { diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index 2e567d90fba8..9047c168298a 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -63,40 +63,63 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt = <1>; + ebi: ebi@10000000 { + pinctrl-0 = <&pinctrl_ebi_addr_nand>; + pinctrl-names = "default"; status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; - - bootloader@40000 { - label = "bootloader"; - reg = <0x40000 0x80000>; - }; - - bootloaderenv@c0000 { - label = "bootloader env"; - reg = <0xc0000 0xc0000>; - }; - - dtb@180000 { - label = "device tree"; - reg = <0x180000 0x80000>; - }; - - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x600000>; - }; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_oe_we + &pinctrl_nand_cs + &pinctrl_nand_rb>; + pinctrl-names = "default"; - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x0f800000>; + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioB 6 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index f66bae925705..57f307541d2e 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -97,6 +97,17 @@ atmel,external-irqs = <31>; }; + matrix: matrix@ffffde00 { + compatible = "atmel,at91sam9x5-matrix", "syscon"; + reg = <0xffffde00 0x100>; + }; + + pmecc: ecc-engine@ffffe000 { + compatible = "atmel,at91sam9g45-pmecc"; + reg = <0xffffe000 0x600>, + <0xffffe600 0x200>; + }; + ramc0: ramc@ffffe800 { compatible = "atmel,at91sam9g45-ddramc"; reg = <0xffffe800 0x200>; @@ -104,6 +115,11 @@ clock-names = "ddrck"; }; + smc: smc@ffffea00 { + compatible = "atmel,at91sam9260-smc", "syscon"; + reg = <0xffffea00 0x200>; + }; + pmc: pmc@fffffc00 { compatible = "atmel,at91sam9x5-pmc", "syscon"; reg = <0xfffffc00 0x200>; @@ -465,6 +481,38 @@ }; }; + ebi { + pinctrl_ebi_data_0_7: ebi-data-lsb-0 { + atmel,pins = + <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ebi_data_8_15: ebi-data-msb-0 { + atmel,pins = + <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ebi_addr_nand: ebi-addr-0 { + atmel,pins = + <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + usart0 { pinctrl_usart0: usart0-0 { atmel,pins = @@ -551,34 +599,20 @@ }; nand { - pinctrl_nand: nand-0 { + pinctrl_nand_oe_we: nand-oe-we-0 { + atmel,pins = + <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_nand_rb: nand-rb-0 { atmel,pins = - <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD0 periph A Read Enable */ - AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD1 periph A Write Enable */ - AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD2 periph A Address Latch Enable */ - AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD3 periph A Command Latch Enable */ - AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD4 gpio Chip Enable pin pull_up */ - AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD5 gpio RDY/BUSY pin pull_up */ - AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD6 periph A Data bit 0 */ - AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD7 periph A Data bit 1 */ - AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD8 periph A Data bit 2 */ - AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD9 periph A Data bit 3 */ - AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A Data bit 4 */ - AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A Data bit 5 */ - AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD12 periph A Data bit 6 */ - AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD13 periph A Data bit 7 */ - }; - - pinctrl_nand_16bits: nand_16bits-0 { + <AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_nand_cs: nand-cs-0 { atmel,pins = - <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD14 periph A Data bit 8 */ - AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD15 periph A Data bit 9 */ - AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD16 periph A Data bit 10 */ - AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD17 periph A Data bit 11 */ - AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD18 periph A Data bit 12 */ - AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD19 periph A Data bit 13 */ - AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD20 periph A Data bit 14 */ - AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD21 periph A Data bit 15 */ + <AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; }; }; @@ -1197,28 +1231,6 @@ }; }; - nand0: nand@40000000 { - compatible = "atmel,at91rm9200-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x40000000 0x10000000 - 0xffffe000 0x600 /* PMECC Registers */ - 0xffffe600 0x200 /* PMECC Error Location Registers */ - 0x00108000 0x18000 /* PMECC looup table in ROM code */ - >; - atmel,pmecc-lookup-table-offset = <0x0 0x8000>; - atmel,nand-addr-offset = <21>; - atmel,nand-cmd-offset = <22>; - atmel,nand-has-dma; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioD 5 GPIO_ACTIVE_HIGH - &pioD 4 GPIO_ACTIVE_HIGH - 0 - >; - status = "disabled"; - }; - usb0: ohci@00600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; @@ -1236,6 +1248,32 @@ clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; + + ebi: ebi@10000000 { + compatible = "atmel,at91sam9x5-ebi"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&smc>; + atmel,matrix = <&matrix>; + reg = <0x10000000 0x60000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x20000000 0x10000000 + 0x2 0x0 0x30000000 0x10000000 + 0x3 0x0 0x40000000 0x10000000 + 0x4 0x0 0x50000000 0x10000000 + 0x5 0x0 0x60000000 0x10000000>; + clocks = <&mck>; + status = "disabled"; + + nand_controller: nand-controller { + compatible = "atmel,at91sam9g45-nand-controller"; + ecc-engine = <&pmecc>; + #address-cells = <2>; + #size-cells = <1>; + ranges; + status = "disabled"; + }; + }; }; i2c-gpio-0 { diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index b098ad8cd93a..bdeaa0b64a5b 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -37,38 +37,61 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - atmel,has-pmecc; /* Enable PMECC */ - atmel,pmecc-cap = <2>; - atmel,pmecc-sector-size = <512>; - nand-on-flash-bbt; + ebi: ebi@10000000 { + pinctrl-0 = <&pinctrl_ebi_addr_nand + &pinctrl_ebi_data_0_7>; + pinctrl-names = "default"; status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; - - uboot@40000 { - label = "u-boot"; - reg = <0x40000 0x80000>; - }; - - ubootenv@c0000 { - label = "U-Boot Env"; - reg = <0xc0000 0x140000>; - }; - - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x600000>; - }; - - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x1f800000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_oe_we + &pinctrl_nand_cs + &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <2>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + uboot@40000 { + label = "u-boot"; + reg = <0x40000 0x80000>; + }; + + ubootenv@c0000 { + label = "U-Boot Env"; + reg = <0xc0000 0x140000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x1f800000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi index 9677dd5cf6b6..3c8fa26e87b7 100644 --- a/arch/arm/boot/dts/axp209.dtsi +++ b/arch/arm/boot/dts/axp209.dtsi @@ -64,6 +64,11 @@ #gpio-cells = <2>; }; + battery_power_supply: battery-power-supply { + compatible = "x-powers,axp209-battery-power-supply"; + status = "disabled"; + }; + regulators { /* Default work frequency for buck regulators */ x-powers,dcdc-freq = <1500>; diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/axp22x.dtsi index 67331c5f1714..87fb08e812ec 100644 --- a/arch/arm/boot/dts/axp22x.dtsi +++ b/arch/arm/boot/dts/axp22x.dtsi @@ -57,6 +57,11 @@ status = "disabled"; }; + battery_power_supply: battery-power-supply { + compatible = "x-powers,axp221-battery-power-supply"; + status = "disabled"; + }; + regulators { /* Default work frequency for buck regulators */ x-powers,dcdc-freq = <3000>; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 9644fddb5e3c..bf8c83815753 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -142,6 +142,55 @@ interrupts = <0>; }; + mdio: mdio@18002000 { + compatible = "brcm,iproc-mdio"; + reg = <0x18002000 0x8>; + #size-cells = <1>; + #address-cells = <0>; + status = "disabled"; + + gphy0: ethernet-phy@0 { + reg = <0>; + }; + + gphy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + switch: switch@18007000 { + compatible = "brcm,bcm11360-srab", "brcm,cygnus-srab"; + reg = <0x18007000 0x1000>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phy-handle = <&gphy0>; + phy-mode = "rgmii"; + }; + + port@1 { + reg = <1>; + phy-handle = <&gphy1>; + phy-mode = "rgmii"; + }; + + port@8 { + reg = <8>; + label = "cpu"; + ethernet = <ð0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + i2c0: i2c@18008000 { compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; reg = <0x18008000 0x100>; @@ -295,6 +344,15 @@ status = "disabled"; }; + eth0: ethernet@18042000 { + compatible = "brcm,amac"; + reg = <0x18042000 0x1000>, + <0x18110000 0x1000>; + reg-names = "amac_base", "idm_base"; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + nand: nand@18046000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x18046000 0x600>, <0xf8105408 0x600>, @@ -386,6 +444,19 @@ status = "disabled"; }; + v3d: v3d@180a2000 { + compatible = "brcm,cygnus-v3d"; + reg = <0x180a2000 0x1000>; + clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>; + clock-names = "v3d_clk"; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vc4: gpu { + compatible = "brcm,cygnus-vc4"; + }; + adc: adc@180a6000 { compatible = "brcm,iproc-static-adc"; #io-channel-cells = <1>; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index fe6cba994a97..7204d1def23d 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -413,6 +413,12 @@ <0x3f408 0x04>; }; + thermal: thermal@3f2c0 { + compatible = "brcm,ns-thermal"; + reg = <0x3f2c0 0x10>; + #thermal-sensor-cells = <0>; + }; + sata_phy: sata_phy@40100 { compatible = "brcm,iproc-nsp-sata-phy"; reg = <0x40100 0x340>; @@ -563,4 +569,24 @@ brcm,pcie-msi-inten; }; }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + coefficients = <(-556) 418000>; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts index cc8b832c4c78..79a20d520931 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts @@ -12,7 +12,7 @@ /dts-v1/; #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" -#include "bcm283x-rpi-usb-host.dtsi" +#include "bcm283x-rpi-usb-otg.dtsi" / { compatible = "raspberrypi,model-zero", "brcm,bcm2835"; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index a7b5ce133784..e55b362b9d6e 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -65,13 +65,13 @@ &sdhci { pinctrl-names = "default"; pinctrl-0 = <&emmc_gpio48>; - status = "okay"; bus-width = <4>; }; &sdhost { pinctrl-names = "default"; pinctrl-0 = <&sdhost_gpio48>; + status = "okay"; bus-width = <4>; }; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 0890d97e674d..659b6e9513b1 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -24,6 +24,10 @@ }; }; +&cpu_thermal { + coefficients = <(-538) 407000>; +}; + /* enable thermal sensor with the correct compatible property set */ &thermal { compatible = "brcm,bcm2835-thermal"; diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi index 519a44f5d25a..da3deeb42592 100644 --- a/arch/arm/boot/dts/bcm2836.dtsi +++ b/arch/arm/boot/dts/bcm2836.dtsi @@ -77,6 +77,10 @@ interrupts = <8>; }; +&cpu_thermal { + coefficients = <(-538) 407000>; +}; + /* enable thermal sensor with the correct compatible property set */ &thermal { compatible = "brcm,bcm2836-thermal"; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts new file mode 100644 index 000000000000..c72a27d908b6 --- /dev/null +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts @@ -0,0 +1 @@ +#include "arm64/broadcom/bcm2837-rpi-3-b.dts" diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi new file mode 100644 index 000000000000..e7d217c967a1 --- /dev/null +++ b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi @@ -0,0 +1,10 @@ +&usb { + dr_mode = "otg"; + g-rx-fifo-size = <256>; + g-np-tx-fifo-size = <32>; + /* + * According to dwc2 the sum of all device EP + * fifo sizes shouldn't exceed 3776 bytes. + */ + g-tx-fifo-size = <256 256 512 512 512 768 768>; +}; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 561f27d8d922..431dcfc900c0 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -3,6 +3,11 @@ #include <dt-bindings/clock/bcm2835-aux.h> #include <dt-bindings/gpio/gpio.h> +/* firmware-provided startup stubs live here, where the secondary CPUs are + * spinning. + */ +/memreserve/ 0x00000000 0x00001000; + /* This include file covers the common peripherals and configuration between * bcm2835 and bcm2836 implementations, leaving the CPU configuration to * bcm2835.dtsi and bcm2836.dtsi. @@ -19,6 +24,26 @@ bootargs = "earlyprintk console=ttyAMA0"; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <80000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -430,6 +455,7 @@ compatible = "brcm,bcm2835-thermal"; reg = <0x7e212000 0x8>; clocks = <&clocks BCM2835_CLOCK_TSENS>; + #thermal-sensor-cells = <0>; status = "disabled"; }; @@ -568,6 +594,8 @@ #size-cells = <0>; clocks = <&clk_usb>; clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; }; v3d: v3d@7ec00000 { @@ -603,4 +631,8 @@ clock-frequency = <480000000>; }; }; + + usbphy: phy { + compatible = "usb-nop-xceiv"; + }; }; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index acee36a61004..98647d22b291 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -320,6 +320,14 @@ }; }; + mdio: mdio@18003000 { + compatible = "brcm,iproc-mdio"; + reg = <0x18003000 0x8>; + #size-cells = <1>; + #address-cells = <0>; + status = "disabled"; + }; + i2c0: i2c@18009000 { compatible = "brcm,iproc-i2c"; reg = <0x18009000 0x50>; @@ -349,6 +357,12 @@ "sata2"; }; + thermal: thermal@1800c2c0 { + compatible = "brcm,ns-thermal"; + reg = <0x1800c2c0 0x10>; + #thermal-sensor-cells = <0>; + }; + srab: srab@18007000 { compatible = "brcm,bcm5301x-srab"; reg = <0x18007000 0x1000>; @@ -412,4 +426,24 @@ status = "disabled"; }; }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + coefficients = <(-556) 418000>; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; }; diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts index 8b3800f46288..000f5f19215e 100644 --- a/arch/arm/boot/dts/bcm911360_entphn.dts +++ b/arch/arm/boot/dts/bcm911360_entphn.dts @@ -57,6 +57,26 @@ }; }; +ð0 { + status = "okay"; +}; + +&mdio { + status = "okay"; +}; + +&switch { + status = "okay"; +}; + +&v3d { + assigned-clocks = + <&mipipll BCM_CYGNUS_MIPIPLL>, + <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>; + assigned-clock-rates = <525000000>, <300000000>; + status = "okay"; +}; + &uart3 { status = "okay"; }; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 8d244cd76c36..a423e8ebfb37 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -82,6 +82,8 @@ tca6416: gpio@20 { compatible = "ti,tca6416"; reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; }; }; wdt: wdt@21000 { diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts index 512604ad8b71..45983c04a8a7 100644 --- a/arch/arm/boot/dts/da850-lego-ev3.dts +++ b/arch/arm/boot/dts/da850-lego-ev3.dts @@ -172,6 +172,18 @@ gpio = <&gpio 111 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + /* + * The EV3 can use 6-AA batteries or a rechargeable Li-ion battery pack. + */ + battery { + pinctrl-names = "default"; + pintctrl-0 = <&battery_pins>; + compatible = "lego,ev3-battery"; + io-channels = <&adc 4>, <&adc 3>; + io-channel-names = "voltage", "current"; + rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>; + }; }; &pmx_core { @@ -228,6 +240,15 @@ 0x34 0x00000008 0x0000000f >; }; + + battery_pins: pinmux_battery_pins { + pinctrl-single,bits = < + /* GP0[6] */ + 0x04 0x00000080 0x000000f0 + /* GP8[8] */ + 0x4c 0x00000080 0x000000f0 + >; + }; }; &pinconf { @@ -342,6 +363,13 @@ &gpio { status = "okay"; + + /* Don't pull down battery voltage adc io channel */ + batt_volt_en { + gpio-hog; + gpios = <6 GPIO_ACTIVE_HIGH>; + output-low; + }; }; &usb_phy { diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 941d455000a7..af68ef7b0caa 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -446,13 +446,38 @@ }; usb0: usb@200000 { compatible = "ti,da830-musb"; - reg = <0x200000 0x10000>; + reg = <0x200000 0x1000>; + ranges; interrupts = <58>; interrupt-names = "mc"; dr_mode = "otg"; phys = <&usb_phy 0>; phy-names = "usb-phy"; status = "disabled"; + + #address-cells = <1>; + #size-cells = <1>; + + dmas = <&cppi41dma 0 0 &cppi41dma 1 0 + &cppi41dma 2 0 &cppi41dma 3 0 + &cppi41dma 0 1 &cppi41dma 1 1 + &cppi41dma 2 1 &cppi41dma 3 1>; + dma-names = + "rx1", "rx2", "rx3", "rx4", + "tx1", "tx2", "tx3", "tx4"; + + cppi41dma: dma-controller@201000 { + compatible = "ti,da830-cppi41"; + reg = <0x201000 0x1000 + 0x202000 0x1000 + 0x204000 0x4000>; + reg-names = "controller", + "scheduler", "queuemgr"; + interrupts = <58>; + #dma-cells = <2>; + #dma-channels = <4>; + status = "okay"; + }; }; sata: sata@218000 { compatible = "ti,da850-ahci"; @@ -503,6 +528,8 @@ ti,ngpio = <144>; ti,davinci-gpio-unbanked = <0>; status = "disabled"; + interrupt-controller; + #interrupt-cells = <2>; }; pinconf: pin-controller@22c00c { compatible = "ti,da850-pupd"; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 31a9e061ddd0..f47fc4daf062 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -529,7 +529,8 @@ }; &usb1 { - dr_mode = "peripheral"; + dr_mode = "otg"; + extcon = <&extcon_usb1>; }; &usb2 { diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index e7144662af45..0f0f6f58bd18 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -99,14 +99,14 @@ compatible = "operating-points-v2-ti-cpu"; syscon = <&scm_wkup>; - opp_nom@1000000000 { + opp_nom-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <1060000 850000 1150000>; opp-supported-hw = <0xFF 0x01>; opp-suspend; }; - opp_od@1176000000 { + opp_od-1176000000 { opp-hz = /bits/ 64 <1176000000>; opp-microvolt = <1160000 885000 1160000>; opp-supported-hw = <0xFF 0x02>; diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index ad24544adf0f..85780549bc26 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -392,7 +392,8 @@ }; &usb1 { - dr_mode = "peripheral"; + dr_mode = "otg"; + extcon = <&extcon_usb1>; }; &usb2 { diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 3330738e4c6e..cf229dfabf61 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -338,6 +338,8 @@ compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>; reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>; + assigned-clocks = <&dpll_dsp_ck>; + assigned-clock-rates = <600000000>; }; dpll_dsp_m2_ck: dpll_dsp_m2_ck@244 { @@ -349,6 +351,8 @@ reg = <0x0244>; ti,index-starts-at-one; ti,invert-autoidle-bit; + assigned-clocks = <&dpll_dsp_m2_ck>; + assigned-clock-rates = <600000000>; }; iva_dpll_hs_clk_div: iva_dpll_hs_clk_div { @@ -372,6 +376,8 @@ compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; + assigned-clocks = <&dpll_iva_ck>; + assigned-clock-rates = <1165000000>; }; dpll_iva_m2_ck: dpll_iva_m2_ck@1b0 { @@ -383,6 +389,8 @@ reg = <0x01b0>; ti,index-starts-at-one; ti,invert-autoidle-bit; + assigned-clocks = <&dpll_iva_m2_ck>; + assigned-clock-rates = <388333334>; }; iva_dclk: iva_dclk { @@ -406,6 +414,8 @@ compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>; reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>; + assigned-clocks = <&dpll_gpu_ck>; + assigned-clock-rates = <1277000000>; }; dpll_gpu_m2_ck: dpll_gpu_m2_ck@2e8 { @@ -417,6 +427,8 @@ reg = <0x02e8>; ti,index-starts-at-one; ti,invert-autoidle-bit; + assigned-clocks = <&dpll_gpu_m2_ck>; + assigned-clock-rates = <425666667>; }; dpll_core_m2_ck: dpll_core_m2_ck@130 { @@ -659,6 +671,8 @@ reg = <0x0248>; ti,index-starts-at-one; ti,invert-autoidle-bit; + assigned-clocks = <&dpll_dsp_m3x2_ck>; + assigned-clock-rates = <400000000>; }; dpll_gmac_x2_ck: dpll_gmac_x2_ck { @@ -791,6 +805,8 @@ clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>; ti,bit-shift = <24>; reg = <0x0520>; + assigned-clocks = <&ipu1_gfclk_mux>; + assigned-clock-parents = <&dpll_core_h22x2_ck>; }; mcasp1_ahclkr_mux: mcasp1_ahclkr_mux@550 { @@ -1748,6 +1764,8 @@ clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>; ti,bit-shift = <24>; reg = <0x1220>; + assigned-clocks = <&gpu_core_gclk_mux>; + assigned-clock-parents = <&dpll_gpu_m2_ck>; }; gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1220 { @@ -1756,6 +1774,8 @@ clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>; ti,bit-shift = <26>; reg = <0x1220>; + assigned-clocks = <&gpu_hyd_gclk_mux>; + assigned-clock-parents = <&dpll_gpu_m2_ck>; }; l3instr_ts_gclk_div: l3instr_ts_gclk_div@e50 { diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index 0124faf175c8..42ea246e71cb 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -197,7 +197,7 @@ clock-names = "sclk"; }; - pfc: pfc@e0140200 { + pfc: pin-controller@e0140200 { compatible = "renesas,pfc-emev2"; reg = <0xe0140200 0x100>; }; diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts index 4687229a3ab9..123b203be06c 100644 --- a/arch/arm/boot/dts/ethernut5.dts +++ b/arch/arm/boot/dts/ethernut5.dts @@ -55,25 +55,38 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; + ebi: ebi@10000000 { status = "okay"; - gpios = <0 - &pioC 14 GPIO_ACTIVE_HIGH - 0 - >; - - root@0 { - label = "root"; - reg = <0x0 0x08000000>; - }; - - data@20000 { - label = "data"; - reg = <0x08000000 0x38000000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs>; + pinctrl-names = "default"; + + nand: nand@3 { + reg = <0x3 0x0 0x800000>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + root@0 { + label = "root"; + reg = <0x0 0x08000000>; + }; + + data@20000 { + label = "data"; + reg = <0x08000000 0x38000000>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index cccfe4b791d1..accee81da266 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -67,7 +67,7 @@ max77836: subpmic@25 { compatible = "maxim,max77836"; interrupt-parent = <&gpx1>; - interrupts = <5 0>; + interrupts = <5 IRQ_TYPE_NONE>; reg = <0x25>; wakeup-source; @@ -191,7 +191,7 @@ s2mps14_pmic@66 { compatible = "samsung,s2mps14-pmic"; interrupt-parent = <&gpx0>; - interrupts = <7 0>; + interrupts = <7 IRQ_TYPE_NONE>; reg = <0x66>; wakeup-source; @@ -414,7 +414,7 @@ fuelgauge@36 { compatible = "maxim,max77836-battery"; interrupt-parent = <&gpx1>; - interrupts = <2 8>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; reg = <0x36>; }; }; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index c9f191ca7b9c..443e0c98dc73 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -58,7 +58,7 @@ max77836: subpmic@25 { compatible = "maxim,max77836"; interrupt-parent = <&gpx1>; - interrupts = <5 0>; + interrupts = <5 IRQ_TYPE_NONE>; reg = <0x25>; wakeup-source; @@ -240,7 +240,7 @@ reg = <0>; vdd3-supply = <&ldo16_reg>; vci-supply = <&ldo20_reg>; - reset-gpios = <&gpe0 1 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>; te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; power-on-delay= <30>; power-off-delay= <120>; @@ -295,7 +295,7 @@ s2mps14_pmic@66 { compatible = "samsung,s2mps14-pmic"; interrupt-parent = <&gpx0>; - interrupts = <7 0>; + interrupts = <7 IRQ_TYPE_NONE>; reg = <0x66>; wakeup-source; @@ -626,7 +626,7 @@ fuelgauge@36 { compatible = "maxim,max77836-battery"; interrupt-parent = <&gpx1>; - interrupts = <2 8>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; reg = <0x36>; }; }; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 312650e2450f..084fcc5574ef 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -151,7 +151,7 @@ compatible = "maxim,max8997-pmic"; reg = <0x66>; interrupt-parent = <&gpx0>; - interrupts = <4 0>, <3 0>; + interrupts = <4 IRQ_TYPE_NONE>, <3 IRQ_TYPE_NONE>; max8997,pmic-buck1-dvs-voltage = <1350000>; max8997,pmic-buck2-dvs-voltage = <1100000>; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 1743ca850070..645feffb9239 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -281,7 +281,7 @@ compatible = "melfas,mms114"; reg = <0x48>; interrupt-parent = <&gpx0>; - interrupts = <4 2>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; x-size = <720>; y-size = <1280>; avdd-supply = <&tsp_reg>; @@ -302,7 +302,7 @@ reg = <0x66>; interrupt-parent = <&gpx0>; - interrupts = <7 0>; + interrupts = <7 IRQ_TYPE_NONE>; max8997,pmic-buck1-uses-gpio-dvs; max8997,pmic-buck2-uses-gpio-dvs; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 0f1ff792fe44..219d587c5a85 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -32,7 +32,7 @@ power_key { interrupt-parent = <&gpx1>; - interrupts = <3 0>; + interrupts = <3 IRQ_TYPE_NONE>; gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "power key"; @@ -266,7 +266,7 @@ max77686: pmic@09 { compatible = "maxim,max77686"; interrupt-parent = <&gpx3>; - interrupts = <2 0>; + interrupts = <2 IRQ_TYPE_NONE>; pinctrl-names = "default"; pinctrl-0 = <&max77686_irq>; reg = <0x09>; @@ -484,7 +484,7 @@ compatible = "maxim,max98090"; reg = <0x10>; interrupt-parent = <&gpx0>; - interrupts = <0 0>; + interrupts = <0 IRQ_TYPE_NONE>; clocks = <&i2s0 CLK_I2S_CDCLK>; clock-names = "mclk"; #sound-dai-cells = <0>; diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 7504a5aa538e..44a4de08466b 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -78,6 +78,10 @@ regulator-max-microvolt = <3300000>; }; +&hdmicec { + needs-hpd; +}; + /* VDDQ for MSHC (eMMC card) */ &ldo22_reg { regulator-name = "LDO22_VDDQ_MMC4_2.8V"; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 46b931eec228..97882267ef09 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -44,7 +44,7 @@ home_key { interrupt-parent = <&gpx2>; - interrupts = <2 0>; + interrupts = <2 IRQ_TYPE_NONE>; gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>; linux,code = <KEY_HOME>; label = "home key"; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 82221a00444d..35e9b94b86b8 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -144,7 +144,7 @@ max77693@66 { compatible = "maxim,max77693"; interrupt-parent = <&gpx1>; - interrupts = <5 2>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; reg = <0x66>; regulators { @@ -224,7 +224,7 @@ compatible = "capella,cm36651"; reg = <0x18>; interrupt-parent = <&gpx0>; - interrupts = <2 2>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; vled-supply = <&ps_als_reg>; }; }; @@ -573,7 +573,7 @@ compatible = "melfas,mms114"; reg = <0x48>; interrupt-parent = <&gpm2>; - interrupts = <3 2>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; x-size = <720>; y-size = <1280>; avdd-supply = <&ldo23_reg>; @@ -611,7 +611,7 @@ max77686: max77686_pmic@09 { compatible = "maxim,max77686"; interrupt-parent = <&gpx0>; - interrupts = <7 0>; + interrupts = <7 IRQ_TYPE_NONE>; reg = <0x09>; #clock-cells = <1>; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index b74c5379ca26..66d22521c976 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -55,38 +55,38 @@ interrupt-controller; samsung,combiner-nr = <32>; reg = <0x10440000 0x1000>; - interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, - <0 1 IRQ_TYPE_LEVEL_HIGH>, - <0 2 IRQ_TYPE_LEVEL_HIGH>, - <0 3 IRQ_TYPE_LEVEL_HIGH>, - <0 4 IRQ_TYPE_LEVEL_HIGH>, - <0 5 IRQ_TYPE_LEVEL_HIGH>, - <0 6 IRQ_TYPE_LEVEL_HIGH>, - <0 7 IRQ_TYPE_LEVEL_HIGH>, - <0 8 IRQ_TYPE_LEVEL_HIGH>, - <0 9 IRQ_TYPE_LEVEL_HIGH>, - <0 10 IRQ_TYPE_LEVEL_HIGH>, - <0 11 IRQ_TYPE_LEVEL_HIGH>, - <0 12 IRQ_TYPE_LEVEL_HIGH>, - <0 13 IRQ_TYPE_LEVEL_HIGH>, - <0 14 IRQ_TYPE_LEVEL_HIGH>, - <0 15 IRQ_TYPE_LEVEL_HIGH>, - <0 16 IRQ_TYPE_LEVEL_HIGH>, - <0 17 IRQ_TYPE_LEVEL_HIGH>, - <0 18 IRQ_TYPE_LEVEL_HIGH>, - <0 19 IRQ_TYPE_LEVEL_HIGH>, - <0 20 IRQ_TYPE_LEVEL_HIGH>, - <0 21 IRQ_TYPE_LEVEL_HIGH>, - <0 22 IRQ_TYPE_LEVEL_HIGH>, - <0 23 IRQ_TYPE_LEVEL_HIGH>, - <0 24 IRQ_TYPE_LEVEL_HIGH>, - <0 25 IRQ_TYPE_LEVEL_HIGH>, - <0 26 IRQ_TYPE_LEVEL_HIGH>, - <0 27 IRQ_TYPE_LEVEL_HIGH>, - <0 28 IRQ_TYPE_LEVEL_HIGH>, - <0 29 IRQ_TYPE_LEVEL_HIGH>, - <0 30 IRQ_TYPE_LEVEL_HIGH>, - <0 31 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; }; gic: interrupt-controller@10481000 { @@ -109,31 +109,31 @@ serial_0: serial@12C00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; - interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; }; serial_1: serial@12C10000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C10000 0x100>; - interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; }; serial_2: serial@12C20000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C20000 0x100>; - interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; }; serial_3: serial@12C30000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C30000 0x100>; - interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; }; i2c_0: i2c@12C60000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C60000 0x100>; - interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; samsung,sysreg-phandle = <&sysreg_system_controller>; @@ -143,7 +143,7 @@ i2c_1: i2c@12C70000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C70000 0x100>; - interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; samsung,sysreg-phandle = <&sysreg_system_controller>; @@ -153,7 +153,7 @@ i2c_2: i2c@12C80000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C80000 0x100>; - interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; samsung,sysreg-phandle = <&sysreg_system_controller>; @@ -163,7 +163,7 @@ i2c_3: i2c@12C90000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C90000 0x100>; - interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; samsung,sysreg-phandle = <&sysreg_system_controller>; @@ -180,8 +180,8 @@ rtc: rtc@101E0000 { compatible = "samsung,s3c6410-rtc"; reg = <0x101E0000 0x100>; - interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>, - <0 44 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 6098dacd09f1..6a432460eb77 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -14,7 +14,6 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> #include "exynos5250.dtsi" -#include "exynos-mfc-reserved-memory.dtsi" / { model = "Insignal Arndale evaluation board based on EXYNOS5250"; diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index 2f6ab32b5954..1fd122db18e6 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -589,6 +589,13 @@ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; + + hdmi_cec: hdmi-cec { + samsung,pins = "gpx3-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; }; &pinctrl_1 { diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index a97a785ccc6b..6632f657394e 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -13,7 +13,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include "exynos5250.dtsi" -#include "exynos-mfc-reserved-memory.dtsi" / { model = "SAMSUNG SMDK5250 board based on EXYNOS5250"; diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index 8f3a80430748..e1d293dbbe5d 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -272,6 +272,10 @@ vdd_pll-supply = <&ldo8_reg>; }; +&hdmicec { + status = "okay"; +}; + &i2c_0 { status = "okay"; samsung,i2c-sda-delay = <100>; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index 4d7bdb735ed3..95c3bcace9dc 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -14,7 +14,6 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> #include "exynos5250.dtsi" -#include "exynos-mfc-reserved-memory.dtsi" / { model = "Google Spring"; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 79c9c885613a..8dbeb873e99c 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -153,10 +153,10 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; /* * Unfortunately we need this since some versions * of U-Boot on Exynos don't set the CNTFRQ register, @@ -689,6 +689,19 @@ samsung,syscon-phandle = <&pmu_system_controller>; }; + hdmicec: cec@101B0000 { + compatible = "samsung,s5p-cec"; + reg = <0x101B0000 0x200>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_HDMI_CEC>; + clock-names = "hdmicec"; + samsung,syscon-phandle = <&pmu_system_controller>; + hdmi-phandle = <&hdmi>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "disabled"; + }; + mixer@14450000 { compatible = "samsung,exynos5250-mixer"; reg = <0x14450000 0x10000>; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 9cc83c51c925..ee1bb9b8b366 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -16,7 +16,6 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> #include <dt-bindings/clock/samsung,s2mps11.h> -#include "exynos-mfc-reserved-memory.dtsi" / { model = "Insignal Arndale Octa evaluation board based on EXYNOS5420"; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 1f964ec35c5e..f9a75bfd3f2b 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -16,7 +16,6 @@ #include <dt-bindings/regulator/maxim,max77802.h> #include "exynos5420.dtsi" #include "exynos5420-cpus.dtsi" -#include "exynos-mfc-reserved-memory.dtsi" / { model = "Google Peach Pit Rev 6+"; @@ -604,7 +603,7 @@ max98090: codec@10 { compatible = "maxim,max98090"; reg = <0x10>; - interrupts = <2 0>; + interrupts = <2 IRQ_TYPE_NONE>; interrupt-parent = <&gpx0>; pinctrl-names = "default"; pinctrl-0 = <&max98090_irq>; @@ -945,7 +944,7 @@ cros_ec: cros-ec@0 { compatible = "google,cros-ec-spi"; interrupt-parent = <&gpx1>; - interrupts = <5 0>; + interrupts = <5 IRQ_TYPE_NONE>; pinctrl-names = "default"; pinctrl-0 = <&ec_spi_cs &ec_irq>; reg = <0>; diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi index 3924b4fafe72..65aa0e300c23 100644 --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi @@ -67,6 +67,13 @@ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; }; + + hdmi_cec: hdmi-cec { + samsung,pins = "gpx3-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; }; &pinctrl_1 { diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index aaccd0da41e5..08c8ab173e87 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -13,7 +13,6 @@ #include "exynos5420.dtsi" #include "exynos5420-cpus.dtsi" #include <dt-bindings/gpio/gpio.h> -#include "exynos-mfc-reserved-memory.dtsi" / { model = "Samsung SMDK5420 board based on EXYNOS5420"; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 0db0bcf8da36..02d2f898efa6 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -193,7 +193,7 @@ mfc: codec@11000000 { compatible = "samsung,mfc-v7"; reg = <0x11000000 0x10000>; - interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_MFC>; clock-names = "mfc"; power-domains = <&mfc_pd>; @@ -203,7 +203,7 @@ mmc_0: mmc@12200000 { compatible = "samsung,exynos5420-dw-mshc-smu"; - interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; reg = <0x12200000 0x2000>; @@ -215,7 +215,7 @@ mmc_1: mmc@12210000 { compatible = "samsung,exynos5420-dw-mshc-smu"; - interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; reg = <0x12210000 0x2000>; @@ -227,7 +227,7 @@ mmc_2: mmc@12220000 { compatible = "samsung,exynos5420-dw-mshc"; - interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; reg = <0x12220000 0x1000>; @@ -325,37 +325,37 @@ pinctrl_0: pinctrl@13400000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x13400000 0x1000>; - interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; interrupt-parent = <&gic>; - interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; }; pinctrl_1: pinctrl@13410000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x13410000 0x1000>; - interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_2: pinctrl@14000000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x14000000 0x1000>; - interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_3: pinctrl@14010000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x14010000 0x1000>; - interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_4: pinctrl@03860000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x03860000 0x1000>; - interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; }; amba { @@ -368,7 +368,7 @@ adma: adma@03880000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x03880000 0x1000>; - interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_audss EXYNOS_ADMA>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -379,7 +379,7 @@ pdma0: pdma@121A0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121A0000 0x1000>; - interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -390,7 +390,7 @@ pdma1: pdma@121B0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121B0000 0x1000>; - interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -401,7 +401,7 @@ mdma0: mdma@10800000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x10800000 0x1000>; - interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_MDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -412,7 +412,7 @@ mdma1: mdma@11C10000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x11C10000 0x1000>; - interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_MDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -484,7 +484,7 @@ spi_0: spi@12d20000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d20000 0x100>; - interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma0 5 &pdma0 4>; dma-names = "tx", "rx"; @@ -500,7 +500,7 @@ spi_1: spi@12d30000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d30000 0x100>; - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma1 5 &pdma1 4>; dma-names = "tx", "rx"; @@ -516,7 +516,7 @@ spi_2: spi@12d40000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d40000 0x100>; - interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma0 7 &pdma0 6>; dma-names = "tx", "rx"; @@ -544,7 +544,7 @@ dsi@14500000 { compatible = "samsung,exynos5410-mipi-dsi"; reg = <0x14500000 0x10000>; - interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; phys = <&mipi_phy 1>; phy-names = "dsim"; clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>; @@ -557,7 +557,7 @@ adc: adc@12D10000 { compatible = "samsung,exynos-adc-v2"; reg = <0x12D10000 0x100>; - interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TSADC>; clock-names = "adc"; #io-channel-cells = <1>; @@ -569,7 +569,7 @@ hsi2c_8: i2c@12E00000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12E00000 0x1000>; - interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -582,7 +582,7 @@ hsi2c_9: i2c@12E10000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12E10000 0x1000>; - interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -595,7 +595,7 @@ hsi2c_10: i2c@12E20000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12E20000 0x1000>; - interrupts = <0 203 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -608,7 +608,7 @@ hdmi: hdmi@14530000 { compatible = "samsung,exynos5420-hdmi"; reg = <0x14530000 0x70000>; - interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, <&clock CLK_MOUT_HDMI>; @@ -624,10 +624,23 @@ reg = <0x145D0000 0x20>; }; + hdmicec: cec@101B0000 { + compatible = "samsung,s5p-cec"; + reg = <0x101B0000 0x200>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_HDMI_CEC>; + clock-names = "hdmicec"; + samsung,syscon-phandle = <&pmu_system_controller>; + hdmi-phandle = <&hdmi>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "disabled"; + }; + mixer: mixer@14450000 { compatible = "samsung,exynos5420-mixer"; reg = <0x14450000 0x10000>; - interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>; clock-names = "mixer", "hdmi", "sclk_hdmi"; @@ -638,7 +651,7 @@ rotator: rotator@11C00000 { compatible = "samsung,exynos5250-rotator"; reg = <0x11C00000 0x64>; - interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_ROTATOR>; clock-names = "rotator"; iommus = <&sysmmu_rotator>; @@ -647,7 +660,7 @@ gsc_0: video-scaler@13e00000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e00000 0x1000>; - interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_GSCL0>; clock-names = "gscl"; power-domains = <&gsc_pd>; @@ -657,7 +670,7 @@ gsc_1: video-scaler@13e10000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e10000 0x1000>; - interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_GSCL1>; clock-names = "gscl"; power-domains = <&gsc_pd>; @@ -667,7 +680,7 @@ jpeg_0: jpeg@11F50000 { compatible = "samsung,exynos5420-jpeg"; reg = <0x11F50000 0x1000>; - interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; clock-names = "jpeg"; clocks = <&clock CLK_JPEG>; iommus = <&sysmmu_jpeg0>; @@ -676,7 +689,7 @@ jpeg_1: jpeg@11F60000 { compatible = "samsung,exynos5420-jpeg"; reg = <0x11F60000 0x1000>; - interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clock-names = "jpeg"; clocks = <&clock CLK_JPEG2>; iommus = <&sysmmu_jpeg1>; @@ -696,7 +709,7 @@ tmu_cpu0: tmu@10060000 { compatible = "samsung,exynos5420-tmu"; reg = <0x10060000 0x100>; - interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; #include "exynos5420-tmu-sensor-conf.dtsi" @@ -705,7 +718,7 @@ tmu_cpu1: tmu@10064000 { compatible = "samsung,exynos5420-tmu"; reg = <0x10064000 0x100>; - interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; #include "exynos5420-tmu-sensor-conf.dtsi" @@ -714,7 +727,7 @@ tmu_cpu2: tmu@10068000 { compatible = "samsung,exynos5420-tmu-ext-triminfo"; reg = <0x10068000 0x100>, <0x1006c000 0x4>; - interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; #include "exynos5420-tmu-sensor-conf.dtsi" @@ -723,7 +736,7 @@ tmu_cpu3: tmu@1006c000 { compatible = "samsung,exynos5420-tmu-ext-triminfo"; reg = <0x1006c000 0x100>, <0x100a0000 0x4>; - interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; #include "exynos5420-tmu-sensor-conf.dtsi" @@ -732,7 +745,7 @@ tmu_gpu: tmu@100a0000 { compatible = "samsung,exynos5420-tmu-ext-triminfo"; reg = <0x100a0000 0x100>, <0x10068000 0x4>; - interrupts = <0 215 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; #include "exynos5420-tmu-sensor-conf.dtsi" @@ -804,7 +817,7 @@ sysmmu_scaler1r: sysmmu@0x12890000 { compatible = "samsung,exynos-sysmmu"; reg = <0x12890000 0x1000>; - interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>; #iommu-cells = <0>; @@ -813,7 +826,7 @@ sysmmu_scaler2r: sysmmu@0x128A0000 { compatible = "samsung,exynos-sysmmu"; reg = <0x128A0000 0x1000>; - interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>; #iommu-cells = <0>; @@ -872,7 +885,7 @@ sysmmu_jpeg1: sysmmu@0x11F20000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11F20000 0x1000>; - interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>; #iommu-cells = <0>; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi index 9493923ec652..c0b85981c6bf 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi @@ -49,7 +49,7 @@ compatible = "maxim,max98090"; reg = <0x10>; interrupt-parent = <&gpx3>; - interrupts = <2 0>; + interrupts = <2 IRQ_TYPE_NONE>; clocks = <&i2s0 CLK_I2S_CDCLK>; clock-names = "mclk"; #sound-dai-cells = <0>; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 05b9afdd6757..f92f95741207 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -18,7 +18,6 @@ #include <dt-bindings/sound/samsung-i2s.h> #include "exynos5800.dtsi" #include "exynos5422-cpus.dtsi" -#include "exynos-mfc-reserved-memory.dtsi" / { memory@40000000 { @@ -265,6 +264,10 @@ vdd-supply = <&ldo6_reg>; }; +&hdmicec { + status = "okay"; +}; + &hsi2c_4 { status = "okay"; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index a4ea018464fc..bc4954e69f7b 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -200,7 +200,7 @@ compatible = "snps,dwmac-3.70a", "snps,dwmac"; reg = <0x00230000 0x8000>; interrupt-parent = <&gic>; - interrupts = <GIC_SPI 31 4>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; phy-mode = "sgmii"; clocks = <&clock CLK_GMAC0>; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index f9ff7f07ae0c..953dc8677dc8 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -16,7 +16,6 @@ #include <dt-bindings/regulator/maxim,max77802.h> #include "exynos5800.dtsi" #include "exynos5420-cpus.dtsi" -#include "exynos-mfc-reserved-memory.dtsi" / { model = "Google Peach Pi Rev 10+"; @@ -604,7 +603,7 @@ max98091: codec@10 { compatible = "maxim,max98091"; reg = <0x10>; - interrupts = <2 0>; + interrupts = <2 IRQ_TYPE_NONE>; interrupt-parent = <&gpx0>; pinctrl-names = "default"; pinctrl-0 = <&max98091_irq>; @@ -914,7 +913,7 @@ cros_ec: cros-ec@0 { compatible = "google,cros-ec-spi"; interrupt-parent = <&gpx1>; - interrupts = <5 0>; + interrupts = <5 IRQ_TYPE_NONE>; pinctrl-names = "default"; pinctrl-0 = <&ec_spi_cs &ec_irq>; reg = <0>; diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi index 4aee5cc75fa4..8613944ea5c5 100644 --- a/arch/arm/boot/dts/ge863-pro3.dtsi +++ b/arch/arm/boot/dts/ge863-pro3.dtsi @@ -23,20 +23,39 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; + ebi: ebi@10000000 { status = "okay"; - boot@0 { - label = "boot"; - reg = <0x0 0x7c0000>; - }; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + label = "boot"; + reg = <0x0 0x7c0000>; + }; - root@07c0000 { - label = "root"; - reg = <0x7c0000 0x7840000>; + root@07c0000 { + label = "root"; + reg = <0x7c0000 0x7840000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts index 7668ba52158e..55f6a4f1f801 100644 --- a/arch/arm/boot/dts/gemini-nas4220b.dts +++ b/arch/arm/boot/dts/gemini-nas4220b.dts @@ -98,5 +98,15 @@ read-only; }; }; + + sata: sata@46000000 { + cortina,gemini-ata-muxmode = <0>; + cortina,gemini-enable-sata-bridge; + status = "okay"; + }; + + ata@63000000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts index 46309e79cc7b..4d200f0bcd45 100644 --- a/arch/arm/boot/dts/gemini-sq201.dts +++ b/arch/arm/boot/dts/gemini-sq201.dts @@ -93,6 +93,12 @@ }; }; + sata: sata@46000000 { + cortina,gemini-ata-muxmode = <0>; + cortina,gemini-enable-sata-bridge; + status = "okay"; + }; + pci@50000000 { status = "okay"; interrupt-map-mask = <0xf800 0 0 7>; @@ -114,5 +120,9 @@ <0x6000 0 0 3 &pci_intc 1>, <0x6000 0 0 4 &pci_intc 2>; }; + + ata@63000000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi index b8d011bdcc76..141d8d3a1d07 100644 --- a/arch/arm/boot/dts/gemini.dtsi +++ b/arch/arm/boot/dts/gemini.dtsi @@ -25,8 +25,11 @@ }; syscon: syscon@40000000 { - compatible = "cortina,gemini-syscon", "syscon", "simple-mfd"; + compatible = "cortina,gemini-syscon", + "syscon", "simple-mfd"; reg = <0x40000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; syscon-reboot { compatible = "syscon-reboot"; @@ -42,23 +45,30 @@ compatible = "cortina,gemini-watchdog"; reg = <0x41000000 0x1000>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon 23>; + clocks = <&syscon 2>; }; uart0: serial@42000000 { compatible = "ns16550a"; reg = <0x42000000 0x100>; - clock-frequency = <48000000>; + resets = <&syscon 18>; + clocks = <&syscon 6>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; }; timer@43000000 { - compatible = "cortina,gemini-timer"; + compatible = "faraday,fttmr010"; reg = <0x43000000 0x1000>; interrupt-parent = <&intcon>; interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */ <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */ <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */ + resets = <&syscon 17>; + /* APB clock or RTC clock */ + clocks = <&syscon 2>, <&syscon 0>; + clock-names = "PCLK", "EXTCLK"; syscon = <&syscon>; }; @@ -66,11 +76,28 @@ compatible = "cortina,gemini-rtc"; reg = <0x45000000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon 16>; + clocks = <&syscon 2>, <&syscon 0>; + clock-names = "PCLK", "EXTCLK"; + }; + + sata: sata@46000000 { + compatible = "cortina,gemini-sata-bridge"; + reg = <0x46000000 0x100>; + resets = <&syscon 26>, + <&syscon 27>; + reset-names = "sata0", "sata1"; + clocks = <&syscon 10>, + <&syscon 11>; + clock-names = "SATA0_PCLK", "SATA1_PCLK"; + syscon = <&syscon>; + status = "disabled"; }; intcon: interrupt-controller@48000000 { compatible = "faraday,ftintc010"; reg = <0x48000000 0x1000>; + resets = <&syscon 14>; interrupt-controller; #interrupt-cells = <2>; }; @@ -85,6 +112,8 @@ compatible = "cortina,gemini-gpio", "faraday,ftgpio010"; reg = <0x4d000000 0x100>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon 20>; + clocks = <&syscon 2>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -95,6 +124,8 @@ compatible = "cortina,gemini-gpio", "faraday,ftgpio010"; reg = <0x4e000000 0x100>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon 21>; + clocks = <&syscon 2>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -105,6 +136,8 @@ compatible = "cortina,gemini-gpio", "faraday,ftgpio010"; reg = <0x4f000000 0x100>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon 22>; + clocks = <&syscon 2>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -118,6 +151,9 @@ * to configure the host bridge. */ reg = <0x50000000 0x100>; + resets = <&syscon 7>; + clocks = <&syscon 15>, <&syscon 4>; + clock-names = "PCLK", "PCICLK"; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; @@ -152,5 +188,44 @@ #interrupt-cells = <1>; }; }; + + ata@63000000 { + compatible = "cortina,gemini-pata", "faraday,ftide010"; + reg = <0x63000000 0x1000>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>; + resets = <&syscon 2>; + clocks = <&syscon 14>; + clock-names = "PCLK"; + sata = <&sata>; + status = "disabled"; + }; + + ata@63400000 { + compatible = "cortina,gemini-pata", "faraday,ftide010"; + reg = <0x63400000 0x1000>; + interrupts = <5 IRQ_TYPE_EDGE_RISING>; + resets = <&syscon 2>; + clocks = <&syscon 14>; + clock-names = "PCLK"; + sata = <&sata>; + status = "disabled"; + }; + + dma-controller@67000000 { + compatible = "faraday,ftdma020", "arm,pl080", "arm,primecell"; + /* Faraday Technology FTDMAC020 variant */ + arm,primecell-periphid = <0x0003b080>; + reg = <0x67000000 0x1000>; + interrupts = <9 IRQ_TYPE_EDGE_RISING>; + resets = <&syscon 10>; + clocks = <&syscon 1>; + clock-names = "apb_pclk"; + /* Bus interface AHB1 (AHB0) is totally tilted */ + lli-bus-interface-ahb2; + mem-bus-interface-ahb2; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + #dma-cells = <2>; + }; }; }; diff --git a/arch/arm/boot/dts/imx23-sansa.dts b/arch/arm/boot/dts/imx23-sansa.dts index 4ec32f4c7885..221fd55e967e 100644 --- a/arch/arm/boot/dts/imx23-sansa.dts +++ b/arch/arm/boot/dts/imx23-sansa.dts @@ -42,6 +42,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "imx23.dtsi" / { @@ -149,9 +150,8 @@ regulator-name = "vdd-touchpad0"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio0 26 0>; + gpio = <&gpio0 26 GPIO_ACTIVE_LOW>; regulator-always-on; - enable-active-low; }; reg_vdd_tuner: regulator-vdd-tuner0 { @@ -159,9 +159,8 @@ regulator-name = "vdd-tuner0"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio0 29 0>; + gpio = <&gpio0 29 GPIO_ACTIVE_LOW>; regulator-always-on; - enable-active-low; }; backlight { diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts index 9b31faa96377..30a62d4be8d9 100644 --- a/arch/arm/boot/dts/imx25-karo-tx25.dts +++ b/arch/arm/boot/dts/imx25-karo-tx25.dts @@ -97,7 +97,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; - phy-reset-gpios = <&gpio3 7 0>; + phy-reset-gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; phy-mode = "rmii"; phy-supply = <®_fec_phy>; status = "okay"; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index d921dd2ed676..c52692821fb1 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -125,7 +125,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-supply = <®_fec_3v3>; - phy-reset-gpios = <&gpio4 8 0>; + phy-reset-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 0cdf333336cd..dfcc8e00cf1c 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -9,6 +9,7 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/gpio/gpio.h> #include "imx25-pinfunc.h" / { diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi index 4f3e0f473581..0b8490b21a38 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi @@ -40,7 +40,7 @@ status = "okay"; at24@52 { - compatible = "at,24c32"; + compatible = "atmel,24c32"; pagesize = <32>; reg = <0x52>; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi index 82fec935ce83..c973c5d91875 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi @@ -193,7 +193,7 @@ status = "okay"; at24@52 { - compatible = "at,24c32"; + compatible = "atmel,24c32"; pagesize = <32>; reg = <0x52>; }; diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts index e5beaa58bb40..3d13b321d27b 100644 --- a/arch/arm/boot/dts/imx28-cfa10037.dts +++ b/arch/arm/boot/dts/imx28-cfa10037.dts @@ -64,7 +64,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a &mac0_pins_cfa10037>; - phy-reset-gpios = <&gpio2 21 0>; + phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index a9c347e48bcf..4cd52d53cf00 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -327,7 +327,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a &mac0_pins_cfa10049>; - phy-reset-gpios = <&gpio2 21 0>; + phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts index 7a80bd686c40..c6067915b238 100644 --- a/arch/arm/boot/dts/imx28-cfa10057.dts +++ b/arch/arm/boot/dts/imx28-cfa10057.dts @@ -162,7 +162,7 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio2 21 0>; + phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts index f5c6dce34abe..70c7bb4a5a0e 100644 --- a/arch/arm/boot/dts/imx28-cfa10058.dts +++ b/arch/arm/boot/dts/imx28-cfa10058.dts @@ -129,7 +129,7 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio2 21 0>; + phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts index e773144e1e03..b61fd61eb1c7 100644 --- a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts +++ b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts @@ -31,7 +31,7 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac1_pins_a>; - phy-reset-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index a5ba669b4eaa..5309bb90d7d5 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -203,7 +203,7 @@ }; at24@51 { - compatible = "at24,24c32"; + compatible = "atmel,24c32"; pagesize = <32>; reg = <0x51>; }; @@ -262,7 +262,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; phy-supply = <®_fec_3v3>; - phy-reset-gpios = <&gpio4 13 0>; + phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts index bb5329479c62..9d6c8fe28d74 100644 --- a/arch/arm/boot/dts/imx28-m28cu3.dts +++ b/arch/arm/boot/dts/imx28-m28cu3.dts @@ -188,7 +188,7 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio4 13 0>; + phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts index dba2d951aa15..98b5faa06e27 100644 --- a/arch/arm/boot/dts/imx50-evk.dts +++ b/arch/arm/boot/dts/imx50-evk.dts @@ -53,7 +53,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio4 12 0>; + phy-reset-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 2a98afcd8a4e..3747d80104f4 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -12,6 +12,7 @@ */ #include "imx50-pinfunc.h" +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/imx5-clock.h> / { diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts index e88b2a6be079..c83ac1600322 100644 --- a/arch/arm/boot/dts/imx51-apf51.dts +++ b/arch/arm/boot/dts/imx51-apf51.dts @@ -36,7 +36,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "mii"; - phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; phy-reset-duration = <1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index 2e44d2aba14e..df705ba48897 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -195,7 +195,7 @@ }; &fec { - phy-reset-gpios = <&gpio7 6 0>; + phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 40b3e31935d0..683dcbe27cbd 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -344,7 +344,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio7 6 0>; + phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 472f6f0f55b3..33cb64fc8372 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -273,6 +273,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio7 6 0>; + phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index 85972f2201c2..eecdc1c55eef 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -272,7 +272,7 @@ }; eeprom: 24c64@50 { - compatible = "at,24c64"; + compatible = "atmel,24c64"; pagesize = <32>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 3a3220141988..7807c1fa1101 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -201,7 +201,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; phy-handle = <&phy0>; mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */ status = "okay"; diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi index 524192cf6a0f..df8dafe2564d 100644 --- a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi +++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi @@ -137,7 +137,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio4 2 0>; + phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-gw560x.dts b/arch/arm/boot/dts/imx6dl-gw560x.dts new file mode 100644 index 000000000000..21bdfaf8df53 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-gw560x.dts @@ -0,0 +1,55 @@ +/* + * Copyright 2017 Gateworks Corporation + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-gw560x.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 DualLite/Solo GW560X"; + compatible = "gw,imx6dl-gw560x", "gw,ventana", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 2cb72824e800..29b45f2e64e0 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -94,7 +94,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 31 0>; + phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6dl-sabrelite.dts b/arch/arm/boot/dts/imx6dl-sabrelite.dts index 2f904527a097..33040761b253 100644 --- a/arch/arm/boot/dts/imx6dl-sabrelite.dts +++ b/arch/arm/boot/dts/imx6dl-sabrelite.dts @@ -48,3 +48,8 @@ model = "Freescale i.MX6 DualLite SABRE Lite Board"; compatible = "fsl,imx6dl-sabrelite", "fsl,imx6dl"; }; + +&ipu1_csi1_from_ipu1_csi1_mux { + clock-lanes = <0>; + data-lanes = <1 2>; +}; diff --git a/arch/arm/boot/dts/imx6dl-sabresd.dts b/arch/arm/boot/dts/imx6dl-sabresd.dts index 1e45f2f9d0b6..9607afe088fc 100644 --- a/arch/arm/boot/dts/imx6dl-sabresd.dts +++ b/arch/arm/boot/dts/imx6dl-sabresd.dts @@ -15,3 +15,8 @@ model = "Freescale i.MX6 DualLite SABRE Smart Device Board"; compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl"; }; + +&ipu1_csi1_from_ipu1_csi1_mux { + clock-lanes = <0>; + data-lanes = <1 2>; +}; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 7aa120fbdc71..8475e6cc59ac 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -100,6 +100,11 @@ }; }; + capture-subsystem { + compatible = "fsl,imx-capture-subsystem"; + ports = <&ipu1_csi0>, <&ipu1_csi1>; + }; + display-subsystem { compatible = "fsl,imx-display-subsystem"; ports = <&ipu1_di0>, <&ipu1_di1>; @@ -164,6 +169,116 @@ <&iomuxc 9 207 1>, <&iomuxc 10 206 1>, <&iomuxc 11 133 3>; }; +&gpr { + ipu1_csi0_mux: ipu1_csi0_mux@34 { + compatible = "video-mux"; + mux-controls = <&mux 0>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ipu1_csi0_mux_from_mipi_vc0: endpoint { + remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>; + }; + }; + + port@1 { + reg = <1>; + + ipu1_csi0_mux_from_mipi_vc1: endpoint { + remote-endpoint = <&mipi_vc1_to_ipu1_csi0_mux>; + }; + }; + + port@2 { + reg = <2>; + + ipu1_csi0_mux_from_mipi_vc2: endpoint { + remote-endpoint = <&mipi_vc2_to_ipu1_csi0_mux>; + }; + }; + + port@3 { + reg = <3>; + + ipu1_csi0_mux_from_mipi_vc3: endpoint { + remote-endpoint = <&mipi_vc3_to_ipu1_csi0_mux>; + }; + }; + + port@4 { + reg = <4>; + + ipu1_csi0_mux_from_parallel_sensor: endpoint { + }; + }; + + port@5 { + reg = <5>; + + ipu1_csi0_mux_to_ipu1_csi0: endpoint { + remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>; + }; + }; + }; + + ipu1_csi1_mux: ipu1_csi1_mux@34 { + compatible = "video-mux"; + mux-controls = <&mux 1>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ipu1_csi1_mux_from_mipi_vc0: endpoint { + remote-endpoint = <&mipi_vc0_to_ipu1_csi1_mux>; + }; + }; + + port@1 { + reg = <1>; + + ipu1_csi1_mux_from_mipi_vc1: endpoint { + remote-endpoint = <&mipi_vc1_to_ipu1_csi1_mux>; + }; + }; + + port@2 { + reg = <2>; + + ipu1_csi1_mux_from_mipi_vc2: endpoint { + remote-endpoint = <&mipi_vc2_to_ipu1_csi1_mux>; + }; + }; + + port@3 { + reg = <3>; + + ipu1_csi1_mux_from_mipi_vc3: endpoint { + remote-endpoint = <&mipi_vc3_to_ipu1_csi1_mux>; + }; + }; + + port@4 { + reg = <4>; + + ipu1_csi1_mux_from_parallel_sensor: endpoint { + }; + }; + + port@5 { + reg = <5>; + + ipu1_csi1_mux_to_ipu1_csi1: endpoint { + remote-endpoint = <&ipu1_csi1_from_ipu1_csi1_mux>; + }; + }; + }; +}; + &gpt { compatible = "fsl,imx6dl-gpt"; }; @@ -172,6 +287,12 @@ compatible = "fsl,imx6dl-hdmi"; }; +&ipu1_csi1 { + ipu1_csi1_from_ipu1_csi1_mux: endpoint { + remote-endpoint = <&ipu1_csi1_mux_to_ipu1_csi1>; + }; +}; + &ldb { clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>, <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>, @@ -181,6 +302,74 @@ "di0", "di1"; }; +&mipi_csi { + port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + mipi_vc0_to_ipu1_csi0_mux: endpoint@0 { + remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>; + }; + + mipi_vc0_to_ipu1_csi1_mux: endpoint@1 { + remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc0>; + }; + }; + + port@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + mipi_vc1_to_ipu1_csi0_mux: endpoint@0 { + remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc1>; + }; + + mipi_vc1_to_ipu1_csi1_mux: endpoint@1 { + remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc1>; + }; + }; + + port@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + mipi_vc2_to_ipu1_csi0_mux: endpoint@0 { + remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc2>; + }; + + mipi_vc2_to_ipu1_csi1_mux: endpoint@1 { + remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc2>; + }; + }; + + port@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + mipi_vc3_to_ipu1_csi0_mux: endpoint@0 { + remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc3>; + }; + + mipi_vc3_to_ipu1_csi1_mux: endpoint@1 { + remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc3>; + }; + }; +}; + +&mux { + mux-reg-masks = <0x34 0x00000007>, /* IPU_CSI0_MUX */ + <0x34 0x00000038>, /* IPU_CSI1_MUX */ + <0x0c 0x0000000c>, /* HDMI_MUX_CTL */ + <0x0c 0x000000c0>, /* LVDS0_MUX_CTL */ + <0x0c 0x00000300>, /* LVDS1_MUX_CTL */ + <0x28 0x00000003>, /* DCIC1_MUX_CTL */ + <0x28 0x0000000c>; /* DCIC2_MUX_CTL */ +}; + &vpu { compatible = "fsl,imx6dl-vpu", "cnm,coda960"; }; diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index 14fa6b25dc45..5fcb0372d58b 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -321,7 +321,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; - reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; fsl,tx-swing-full = <103>; fsl,tx-swing-low = <103>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index 66cac5328b86..fe6ab0aa34f9 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -64,6 +64,14 @@ }; }; + awnh387_pwrseq: pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwrseq>; + compatible = "mmc-pwrseq-sd8787"; + powerdown-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; + }; + reg_pcie_power_on_gpio: regulator-pcie-power-on-gpio { compatible = "regulator-fixed"; regulator-name = "regulator-pcie-power-on-gpio"; @@ -215,7 +223,7 @@ clock-frequency = <100000>; eeprom@50 { - compatible = "at24,24c02"; + compatible = "atmel,24c02"; reg = <0x50>; pagesize = <16>; }; @@ -304,6 +312,13 @@ >; }; + pinctrl_pwrseq: pwrseqgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 @@ -330,6 +345,17 @@ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x130b0 >; }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 + >; + }; }; &pcie { @@ -382,3 +408,18 @@ dr_mode = "otg"; status = "okay"; }; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + mmc-pwrseq = <&awnh387_pwrseq>; + non-removable; + /* + * If the OS probes the Bluetooth AMP function advertised on this bus + * but the firmware in place does not support it, the WiFi/BT module + * gets unresponsive. + * Users who configured their OS properly can enable this node to gain + * WiFi and/or plain Bluetooth support. + */ + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index f28883bbe7b1..33eb7f180995 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -118,7 +118,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 25 0>; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; phy-supply = <&vgen2_1v2_eth>; status = "okay"; }; @@ -435,7 +435,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; - reset-gpio = <&gpio4 8 0>; + reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts index fd2220aa49e2..1f0f950dc11e 100644 --- a/arch/arm/boot/dts/imx6q-evi.dts +++ b/arch/arm/boot/dts/imx6q-evi.dts @@ -135,7 +135,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 25 0>; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 8e84713f42c0..9dbeea05a949 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -19,7 +19,6 @@ /* these are used by bootloader for disabling nodes */ aliases { - ethernet1 = ð1; i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; @@ -154,7 +153,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -347,10 +346,6 @@ &pcie { reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; }; &ssi1 { diff --git a/arch/arm/boot/dts/imx6q-gw560x.dts b/arch/arm/boot/dts/imx6q-gw560x.dts new file mode 100644 index 000000000000..735f2bbf1439 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-gw560x.dts @@ -0,0 +1,59 @@ +/* + * Copyright 2017 Gateworks Corporation + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-gw560x.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 Dual/Quad GW560X"; + compatible = "gw,imx6q-gw560x", "gw,ventana", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts index 0fa32b2f3aec..d83cfb6ec598 100644 --- a/arch/arm/boot/dts/imx6q-novena.dts +++ b/arch/arm/boot/dts/imx6q-novena.dts @@ -217,7 +217,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet_novena>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; rxc-skew-ps = <3000>; rxdv-skew-ps = <0>; txc-skew-ps = <3000>; @@ -446,7 +446,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie_novena>; - reset-gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 02a7cdfd57c9..dc51262e7b2f 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -52,3 +52,8 @@ &sata { status = "okay"; }; + +&ipu1_csi1_from_mipi_vc1 { + clock-lanes = <0>; + data-lanes = <1 2>; +}; diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts index 9cbdfe7a0931..527772b62fee 100644 --- a/arch/arm/boot/dts/imx6q-sabresd.dts +++ b/arch/arm/boot/dts/imx6q-sabresd.dts @@ -23,3 +23,8 @@ &sata { status = "okay"; }; + +&ipu1_csi1_from_mipi_vc1 { + clock-lanes = <0>; + data-lanes = <1 2>; +}; diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts index d900ad6ec5f8..16d5be1aeb3c 100644 --- a/arch/arm/boot/dts/imx6q-utilite-pro.dts +++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts @@ -130,7 +130,7 @@ #size-cells = <0>; eeprom@50 { - compatible = "at24,24c02"; + compatible = "atmel,24c02"; reg = <0x50>; pagesize = <16>; }; diff --git a/arch/arm/boot/dts/imx6q-zii-rdu2.dts b/arch/arm/boot/dts/imx6q-zii-rdu2.dts index b2d346640fd7..6be8a1eea895 100644 --- a/arch/arm/boot/dts/imx6q-zii-rdu2.dts +++ b/arch/arm/boot/dts/imx6q-zii-rdu2.dts @@ -41,8 +41,8 @@ /dts-v1/; -#include <imx6q.dtsi> -#include <imx6qdl-zii-rdu2.dtsi> +#include "imx6q.dtsi" +#include "imx6qdl-zii-rdu2.dtsi" / { model = "ZII RDU2 Board"; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index e9a5d0b8c7b0..90a741732f60 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -125,7 +125,7 @@ clocks = <&clks IMX6QDL_CLK_OPENVG_AXI>, <&clks IMX6QDL_CLK_GPU2D_CORE>; clock-names = "bus", "core"; - power-domains = <&gpc 1>; + power-domains = <&pd_pu>; }; ipu2: ipu@02800000 { @@ -143,10 +143,18 @@ ipu2_csi0: port@0 { reg = <0>; + + ipu2_csi0_from_mipi_vc2: endpoint { + remote-endpoint = <&mipi_vc2_to_ipu2_csi0>; + }; }; ipu2_csi1: port@1 { reg = <1>; + + ipu2_csi1_from_ipu2_csi1_mux: endpoint { + remote-endpoint = <&ipu2_csi1_mux_to_ipu2_csi1>; + }; }; ipu2_di0: port@2 { @@ -198,6 +206,11 @@ }; }; + capture-subsystem { + compatible = "fsl,imx-capture-subsystem"; + ports = <&ipu1_csi0>, <&ipu1_csi1>, <&ipu2_csi0>, <&ipu2_csi1>; + }; + display-subsystem { compatible = "fsl,imx-display-subsystem"; ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>; @@ -246,6 +259,68 @@ gpio-ranges = <&iomuxc 0 172 9>, <&iomuxc 9 189 2>, <&iomuxc 11 146 3>; }; +&gpr { + ipu1_csi0_mux { + compatible = "video-mux"; + mux-controls = <&mux 0>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ipu1_csi0_mux_from_mipi_vc0: endpoint { + remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>; + }; + }; + + port@1 { + reg = <1>; + + ipu1_csi0_mux_from_parallel_sensor: endpoint { + }; + }; + + port@2 { + reg = <2>; + + ipu1_csi0_mux_to_ipu1_csi0: endpoint { + remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>; + }; + }; + }; + + ipu2_csi1_mux { + compatible = "video-mux"; + mux-controls = <&mux 1>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ipu2_csi1_mux_from_mipi_vc3: endpoint { + remote-endpoint = <&mipi_vc3_to_ipu2_csi1_mux>; + }; + }; + + port@1 { + reg = <1>; + + ipu2_csi1_mux_from_parallel_sensor: endpoint { + }; + }; + + port@2 { + reg = <2>; + + ipu2_csi1_mux_to_ipu2_csi1: endpoint { + remote-endpoint = <&ipu2_csi1_from_ipu2_csi1_mux>; + }; + }; + }; +}; + &hdmi { compatible = "fsl,imx6q-hdmi"; @@ -266,6 +341,12 @@ }; }; +&ipu1_csi1 { + ipu1_csi1_from_mipi_vc1: endpoint { + remote-endpoint = <&mipi_vc1_to_ipu1_csi1>; + }; +}; + &ldb { clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>, <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>, @@ -312,6 +393,40 @@ }; }; +&mipi_csi { + port@1 { + reg = <1>; + + mipi_vc0_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>; + }; + }; + + port@2 { + reg = <2>; + + mipi_vc1_to_ipu1_csi1: endpoint { + remote-endpoint = <&ipu1_csi1_from_mipi_vc1>; + }; + }; + + port@3 { + reg = <3>; + + mipi_vc2_to_ipu2_csi0: endpoint { + remote-endpoint = <&ipu2_csi0_from_mipi_vc2>; + }; + }; + + port@4 { + reg = <4>; + + mipi_vc3_to_ipu2_csi1_mux: endpoint { + remote-endpoint = <&ipu2_csi1_mux_from_mipi_vc3>; + }; + }; +}; + &mipi_dsi { ports { port@2 { @@ -332,6 +447,16 @@ }; }; +&mux { + mux-reg-masks = <0x04 0x00080000>, /* MIPI_IPU1_MUX */ + <0x04 0x00100000>, /* MIPI_IPU2_MUX */ + <0x0c 0x0000000c>, /* HDMI_MUX_CTL */ + <0x0c 0x000000c0>, /* LVDS0_MUX_CTL */ + <0x0c 0x00000300>, /* LVDS1_MUX_CTL */ + <0x28 0x00000003>, /* DCIC1_MUX_CTL */ + <0x28 0x0000000c>; /* DCIC2_MUX_CTL */ +}; + &vpu { compatible = "fsl,imx6q-vpu", "cnm,coda960"; }; diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi index 550e100e85fc..9cd2a7477ed7 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi @@ -232,7 +232,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; - reset-gpio = <&gpio6 2 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio6 2 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi index b2debc0aa720..7d64075204ae 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi @@ -118,7 +118,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index ec68f1cace31..1b1872873207 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -320,7 +320,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_LOW>; txd0-skew-ps = <0>; txd1-skew-ps = <0>; txd2-skew-ps = <0>; @@ -335,7 +335,7 @@ }; &pcie { - reset-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio2 16 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index e8078758f26c..ad84eddb6836 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -254,6 +254,7 @@ clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; + lrclk-strength = <3>; }; /* STMPE811 touch screen controller */ diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index a208e7e0dc6e..5bc6ed1a5b35 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -14,7 +14,6 @@ / { /* these are used by bootloader for disabling nodes */ aliases { - ethernet1 = ð1; led0 = &led0; led1 = &led1; led2 = &led2; @@ -342,10 +341,6 @@ pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; }; &pwm2 { diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 968fda94d14b..66fcf838e964 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -14,7 +14,6 @@ / { /* these are used by bootloader for disabling nodes */ aliases { - ethernet1 = ð1; led0 = &led0; led1 = &led1; led2 = &led2; @@ -379,10 +378,6 @@ pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; }; &pwm1 { diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi new file mode 100644 index 000000000000..d894dde6e85d --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi @@ -0,0 +1,749 @@ +/* + * Copyright 2017 Gateworks Corporation + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + /* these are used by bootloader for disabling nodes */ + aliases { + led0 = &led0; + led1 = &led1; + led2 = &led2; + ssi0 = &ssi1; + usb0 = &usbh1; + usb1 = &usbotg; + }; + + chosen { + stdout-path = &uart2; + }; + + backlight-display { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = < + 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100 + >; + default-brightness-level = <100>; + }; + + backlight-keypad { + compatible = "gpio-backlight"; + gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; + default-on; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led0: user1 { + label = "user1"; + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led1: user2 { + label = "user2"; + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ + default-state = "off"; + }; + + led2: user3 { + label = "user3"; + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ + default-state = "off"; + }; + }; + + memory@10000000 { + reg = <0x10000000 0x40000000>; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_12p0v: regulator-12p0v { + compatible = "regulator-fixed"; + regulator-name = "12P0V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_1p4v: regulator-vddsoc { + compatible = "regulator-fixed"; + regulator-name = "vdd_soc"; + regulator-min-microvolt = <1400000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound { + compatible = "fsl,imx6q-ventana-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "sgtl5000-audio"; + ssi-controller = <&ssi1>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <4>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&ecspi3 { + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + eeprom1: eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom2: eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom3: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom4: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + pca9555: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + ds1672: rtc@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + VDDA-supply = <®_1p8v>; + VDDIO-supply = <®_3p3v>; + }; + + tca8418: keypad@34 { + compatible = "ti,tca8418"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_keypad>; + reg = <0x34>; + interrupt-parent = <&gpio5>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + linux,keymap = < MATRIX_KEY(0x00, 0x01, BTN_0) + MATRIX_KEY(0x00, 0x00, BTN_1) + MATRIX_KEY(0x01, 0x01, BTN_2) + MATRIX_KEY(0x01, 0x00, BTN_3) + MATRIX_KEY(0x02, 0x00, BTN_4) + MATRIX_KEY(0x00, 0x03, BTN_5) + MATRIX_KEY(0x00, 0x02, BTN_6) + MATRIX_KEY(0x01, 0x03, BTN_7) + MATRIX_KEY(0x01, 0x02, BTN_8) + MATRIX_KEY(0x02, 0x02, BTN_9) + >; + keypad,num-rows = <4>; + keypad,num-columns = <4>; + }; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + reg = <0x3c>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + regulators { + /* VDD_DDR (1+R1/R2 = 2.105) */ + reg_vdd_ddr: sw2 { + regulator-name = "vddddr"; + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <1684000>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_ARM (1+R1/R2 = 1.931) */ + reg_vdd_arm: sw3 { + regulator-name = "vddarm"; + regulator-min-microvolt = <796551>; + regulator-max-microvolt = <1544827>; + lltc,fb-voltage-divider = <243000 261000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + linux,phandle = <®_vdd_arm>; + }; + + /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */ + reg_1p8v: sw4 { + regulator-name = "vdd1p8"; + regulator-min-microvolt = <1033310>; + regulator-max-microvolt = <2004000>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P0 (1+R1/R2 = 1.39): PCIe/ENET-PHY */ + reg_1p0v: ldo2 { + regulator-name = "vdd1p0"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1050000>; + lltc,fb-voltage-divider = <78700 200000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_AUD_1P8: Audio codec */ + reg_aud_1p8v: ldo3 { + regulator-name = "vdd1p8a"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + /* VDD_HIGH (1+R1/R2 = 4.17) */ + reg_3p0v: ldo4 { + regulator-name = "vdd3p0"; + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + egalax_ts: touchscreen@4 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio5>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + }; +}; + +&ldb { + fsl,dual-channel; + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio4 31 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ + status = "disabled"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ + status = "disabled"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <8>; + vmmc-supply = <®_3p3v>; + non-removable; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + +&iomuxc { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + /* AUD4 */ + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0 + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ + /* AUD6 */ + MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x130b0 + MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x130b0 + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x130b0 + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x130b0 + >; + }; + + pinctrl_ecspi3: escpi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x4001b0b0 /* PHY_RST# */ + >; + }; + + pinctrl_flexcan: flexcangrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x4001b0b0 /* DIOI2C_DIS# */ + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x0001b0b0 /* LVDS_TOUCH_IRQ# */ + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x0001b0b0 /* LVDS_BACKEN */ + >; + }; + + pinctrl_keypad: keypadgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x0001b0b0 /* KEYPAD_IRQ# */ + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x0001b0b0 /* KEYPAD_LED_EN */ + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b0 /* PCI_RST# */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x4001b0b0 /* PCIESKT_WDIS# */ + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */ + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* USBHUB_RST# */ + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x170f9 + MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x170f9 + MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x170f9 + MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x170f9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi index a9b207751a02..900e8c781f91 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi @@ -46,7 +46,7 @@ pinctrl-0 = <&pinctrl_microsom_enet_ar8035>; phy-mode = "rgmii"; phy-reset-duration = <2>; - phy-reset-gpios = <&gpio4 15 0>; + phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index bad3c9f9eeac..b63134e3b51a 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -408,7 +408,7 @@ }; rtc: rtc@68 { - compatible = "st,rv4162"; + compatible = "microcrystal,rv4162"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rv4162>; reg = <0x68>; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index 559da17297ef..aeaa5a6e4fcf 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -326,7 +326,7 @@ }; rtc@68 { - compatible = "st,rv4162"; + compatible = "microcrystal,rv4162"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rv4162>; reg = <0x68>; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 70772ebadd4d..f22e5879340b 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -271,7 +271,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 27 0>; + phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; txen-skew-ps = <0>; txc-skew-ps = <3000>; rxdv-skew-ps = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 6e5cb6a99550..d81b0078a100 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -374,7 +374,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; - reset-gpio = <&gpio4 17 0>; + reset-gpio = <&gpio4 17 GPIO_ACTIVE_LOW>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index a2a714d199ea..6a7594e5d183 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -108,6 +108,76 @@ default-brightness-level = <7>; status = "okay"; }; + + i2cmux { + compatible = "i2c-mux-gpio"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3mux>; + mux-gpios = <&gpio5 4 0>; + i2c-parent = <&i2c3>; + idle-state = <0>; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + adv7180: camera@21 { + compatible = "adi,adv7180"; + reg = <0x21>; + powerdown-gpios = <&max7310_b 2 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio1>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + + port { + adv7180_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-width = <8>; + }; + }; + }; + + max7310_a: gpio@30 { + compatible = "maxim,max7310"; + reg = <0x30>; + gpio-controller; + #gpio-cells = <2>; + }; + + max7310_b: gpio@32 { + compatible = "maxim,max7310"; + reg = <0x32>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_max7310>; + reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + + max7310_c: gpio@34 { + compatible = "maxim,max7310"; + reg = <0x34>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; +}; + +&ipu1_csi0_from_ipu1_csi0_mux { + bus-width = <8>; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&adv7180_to_ipu1_csi0_mux>; + bus-width = <8>; +}; + +&ipu1_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; }; &clks { @@ -290,27 +360,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - - max7310_a: gpio@30 { - compatible = "maxim,max7310"; - reg = <0x30>; - gpio-controller; - #gpio-cells = <2>; - }; - - max7310_b: gpio@32 { - compatible = "maxim,max7310"; - reg = <0x32>; - gpio-controller; - #gpio-cells = <2>; - }; - - max7310_c: gpio@34 { - compatible = "maxim,max7310"; - reg = <0x34>; - gpio-controller; - #gpio-cells = <2>; - }; }; &iomuxc { @@ -418,12 +467,52 @@ >; }; + pinctrl_i2c3mux: i2c3muxgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x0b0b1 + >; + }; + + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 + >; + }; + + pinctrl_max7310: max7310grp { + fsl,pins = < + MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0 + >; + }; + pinctrl_pwm3: pwm1grp { fsl,pins = < MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 >; }; + pinctrl_gpt_input_capture0: gptinputcapture0grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1 0x1b0b0 + >; + }; + + pinctrl_gpt_input_capture1: gptinputcapture1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2 0x1b0b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 84131794e97b..afe7449c47da 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -39,6 +39,8 @@ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ + +#include <dt-bindings/clock/imx6qdl-clock.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -94,6 +96,42 @@ pinctrl-0 = <&pinctrl_can_xcvr>; gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; }; + + reg_1p5v: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "1P5V"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + reg_1p8v: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_2p8v: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "2P8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + }; + + mipi_xclk: mipi_xclk { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <22000000>; + clock-output-names = "mipi_pwm3"; + pwms = <&pwm3 0 45>; /* 1 / 45 ns = 22 MHz */ + status = "okay"; }; gpio-keys { @@ -220,6 +258,22 @@ }; }; +&ipu1_csi0_from_ipu1_csi0_mux { + bus-width = <8>; + data-shift = <12>; /* Lines 19:12 used */ + hsync-active = <1>; + vync-active = <1>; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&ov5642_to_ipu1_csi0_mux>; +}; + +&ipu1_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; +}; + &audmux { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; @@ -270,9 +324,6 @@ txd1-skew-ps = <0>; txd2-skew-ps = <0>; txd3-skew-ps = <0>; - interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, - <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; - fsl,err006687-workaround-present; status = "okay"; }; @@ -301,6 +352,53 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ov5640: camera@40 { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5640>; + reg = <0x40>; + clocks = <&mipi_xclk>; + clock-names = "xclk"; + DOVDD-supply = <®_1p8v>; + AVDD-supply = <®_2p8v>; + DVDD-supply = <®_1p5v>; + reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* NANDF_D5 */ + powerdown-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* NANDF_WP_B */ + + port { + #address-cells = <1>; + #size-cells = <0>; + + ov5640_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + + ov5642: camera@42 { + compatible = "ovti,ov5642"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5642>; + clocks = <&clks IMX6QDL_CLK_CKO2>; + clock-names = "xclk"; + reg = <0x42>; + reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + powerdown-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + gp-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; + status = "disabled"; + + port { + ov5642_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-width = <8>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; }; &i2c3 { @@ -373,7 +471,6 @@ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 /* Phy reset */ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x000b0 - MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 >; }; @@ -415,6 +512,23 @@ >; }; + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x1b0b0 + >; + }; + pinctrl_j15: j15grp { fsl,pins = < MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 @@ -448,6 +562,22 @@ >; }; + pinctrl_ov5640: ov5640grp { + fsl,pins = < + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000b0 + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0 + >; + }; + + pinctrl_ov5642: ov5642grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x130b0 + MX6QDL_PAD_GPIO_3__CCM_CLKO2 0x000b0 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 @@ -602,3 +732,17 @@ vmmc-supply = <®_3p3v>; status = "okay"; }; + +&mipi_csi { + status = "okay"; + + port@0 { + reg = <0>; + + mipi_csi2_in: endpoint { + remote-endpoint = <&ov5640_to_mipi_csi2>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 58055ceec6dc..b72b6fa47580 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -10,6 +10,7 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/clock/imx6qdl-clock.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -146,6 +147,36 @@ }; }; +&ipu1_csi0_from_ipu1_csi0_mux { + bus-width = <8>; + data-shift = <12>; /* Lines 19:12 used */ + hsync-active = <1>; + vsync-active = <1>; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&ov5642_to_ipu1_csi0_mux>; +}; + +&ipu1_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; +}; + +&mipi_csi { + status = "okay"; + + port@0 { + reg = <0>; + + mipi_csi2_in: endpoint { + remote-endpoint = <&ov5640_to_mipi_csi2>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; +}; + &audmux { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; @@ -178,7 +209,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 25 0>; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -213,7 +244,32 @@ 0x8014 /* 4:FN_DMICCDAT */ 0x0000 /* 5:Default */ >; - }; + }; + + ov5642: camera@3c { + compatible = "ovti,ov5642"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5642>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "xclk"; + reg = <0x3c>; + DOVDD-supply = <&vgen4_reg>; /* 1.8v */ + AVDD-supply = <&vgen3_reg>; /* 2.8v, rev C board is VGEN3 + rev B board is VGEN5 */ + DVDD-supply = <&vgen2_reg>; /* 1.5v*/ + powerdown-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + status = "disabled"; + + port { + ov5642_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-width = <8>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; }; &i2c2 { @@ -222,6 +278,32 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + ov5640: camera@3c { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5640>; + reg = <0x3c>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "xclk"; + DOVDD-supply = <&vgen4_reg>; /* 1.8v */ + AVDD-supply = <&vgen3_reg>; /* 2.8v, rev C board is VGEN3 + rev B board is VGEN5 */ + DVDD-supply = <&vgen2_reg>; /* 1.5v*/ + powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + ov5640_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + pmic: pfuze100@08 { compatible = "fsl,pfuze100"; reg = <0x08>; @@ -425,6 +507,36 @@ >; }; + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 + >; + }; + + pinctrl_ov5640: ov5640grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0 + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x1b0b0 + >; + }; + + pinctrl_ov5642: ov5642grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 + >; + }; + pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index 1691714f13a2..c6bec97fbeaf 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -133,8 +133,7 @@ regulator-max-microvolt = <3300000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan_xcvr>; - gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; - enable-active-low; + gpio = <&gpio4 21 GPIO_ACTIVE_LOW>; }; reg_lcd0_pwr: regulator-lcd0-pwr { @@ -249,7 +248,7 @@ <&clks IMX6QDL_CLK_ENET_REF>; clock-names = "ipg", "ahb", "ptp", "enet_out"; phy-mode = "rmii"; - phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; phy-handle = <&etnphy>; phy-supply = <®_3v3_etn>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index 82dc5744ae19..b4fa7f1d63da 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -88,6 +88,7 @@ clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; + lrclk-strength = <3>; }; }; @@ -208,7 +209,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 29 0>; + phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index e426faa9c243..a9723b94bafa 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -156,7 +156,7 @@ <&clks IMX6QDL_CLK_GPU3D_CORE>, <&clks IMX6QDL_CLK_GPU3D_SHADER>; clock-names = "bus", "core", "shader"; - power-domains = <&gpc 1>; + power-domains = <&pd_pu>; }; gpu_2d: gpu@00134000 { @@ -166,7 +166,7 @@ clocks = <&clks IMX6QDL_CLK_GPU2D_AXI>, <&clks IMX6QDL_CLK_GPU2D_CORE>; clock-names = "bus", "core"; - power-domains = <&gpc 1>; + power-domains = <&pd_pu>; }; timer@00a00600 { @@ -434,7 +434,7 @@ clocks = <&clks IMX6QDL_CLK_VPU_AXI>, <&clks IMX6QDL_CLK_MMDC_CH0_AXI>; clock-names = "per", "ahb"; - power-domains = <&gpc 1>; + power-domains = <&pd_pu>; resets = <&src 1>; iram = <&ocram>; }; @@ -644,6 +644,7 @@ anatop-min-bit-val = <4>; anatop-min-voltage = <800000>; anatop-max-voltage = <1375000>; + anatop-enable-bit = <0>; }; regulator-3p0 { @@ -658,6 +659,7 @@ anatop-min-bit-val = <0>; anatop-min-voltage = <2625000>; anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; }; regulator-2p5 { @@ -672,6 +674,7 @@ anatop-min-bit-val = <0>; anatop-min-voltage = <2100000>; anatop-max-voltage = <2875000>; + anatop-enable-bit = <0>; }; reg_arm: regulator-vddcore { @@ -797,19 +800,39 @@ interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>, <0 90 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&intc>; - pu-supply = <®_pu>; - clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>, - <&clks IMX6QDL_CLK_GPU3D_SHADER>, - <&clks IMX6QDL_CLK_GPU2D_CORE>, - <&clks IMX6QDL_CLK_GPU2D_AXI>, - <&clks IMX6QDL_CLK_OPENVG_AXI>, - <&clks IMX6QDL_CLK_VPU_AXI>; - #power-domain-cells = <1>; + clocks = <&clks IMX6QDL_CLK_IPG>; + clock-names = "ipg"; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + power-domain@0 { + reg = <0>; + #power-domain-cells = <0>; + }; + pd_pu: power-domain@1 { + reg = <1>; + #power-domain-cells = <0>; + power-supply = <®_pu>; + clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>, + <&clks IMX6QDL_CLK_GPU3D_SHADER>, + <&clks IMX6QDL_CLK_GPU2D_CORE>, + <&clks IMX6QDL_CLK_GPU2D_AXI>, + <&clks IMX6QDL_CLK_OPENVG_AXI>, + <&clks IMX6QDL_CLK_VPU_AXI>; + }; + }; }; gpr: iomuxc-gpr@020e0000 { - compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; + compatible = "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd"; reg = <0x020e0000 0x38>; + + mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + }; }; iomuxc: iomuxc@020e0000 { @@ -1135,7 +1158,16 @@ }; mipi_csi: mipi@021dc000 { + compatible = "fsl,imx6-mipi-csi2"; reg = <0x021dc000 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 100 0x04>, <0 101 0x04>; + clocks = <&clks IMX6QDL_CLK_HSI_TX>, + <&clks IMX6QDL_CLK_VIDEO_27M>, + <&clks IMX6QDL_CLK_EIM_PODF>; + clock-names = "dphy", "ref", "pix"; + status = "disabled"; }; mipi_dsi: mipi@021e0000 { @@ -1237,6 +1269,10 @@ ipu1_csi0: port@0 { reg = <0>; + + ipu1_csi0_from_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_to_ipu1_csi0>; + }; }; ipu1_csi1: port@1 { diff --git a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts index 882b3bd97e07..547a76677ab3 100644 --- a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts +++ b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts @@ -41,8 +41,8 @@ /dts-v1/; -#include <imx6qp.dtsi> -#include <imx6qdl-zii-rdu2.dtsi> +#include "imx6qp.dtsi" +#include "imx6qdl-zii-rdu2.dtsi" / { model = "ZII RDU2+ Board"; diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi index 59453f2ac4ba..299d863690c5 100644 --- a/arch/arm/boot/dts/imx6qp.dtsi +++ b/arch/arm/boot/dts/imx6qp.dtsi @@ -120,6 +120,10 @@ <0 119 IRQ_TYPE_LEVEL_HIGH>; }; +&gpc { + compatible = "fsl,imx6qp-gpc", "fsl,imx6q-gpc"; +}; + &ipu1 { compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu"; fsl,prg = <&prg1>; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index cc9572ea2860..3243af4a9984 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -530,6 +530,7 @@ anatop-min-bit-val = <4>; anatop-min-voltage = <800000>; anatop-max-voltage = <1375000>; + anatop-enable-bit = <0>; }; regulator-3p0 { @@ -544,6 +545,7 @@ anatop-min-bit-val = <0>; anatop-min-voltage = <2625000>; anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; }; regulator-2p5 { @@ -558,6 +560,7 @@ anatop-min-bit-val = <0>; anatop-min-voltage = <2100000>; anatop-max-voltage = <2850000>; + anatop-enable-bit = <0>; }; reg_arm: regulator-vddcore { diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index 802da45aa551..c5578d1c1ee4 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -296,7 +296,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; - reset-gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio4 10 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -374,7 +374,7 @@ cap-sdio-irq; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio7>; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index d71da30c9cff..c0139d7e497a 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -128,3 +128,11 @@ reg = <1>; }; }; + +®_arm { + vin-supply = <&sw1a_reg>; +}; + +®_soc { + vin-supply = <&sw1a_reg>; +}; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 3f1416be4c36..f16b9df9d0c6 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -587,6 +587,7 @@ anatop-min-bit-val = <4>; anatop-min-voltage = <800000>; anatop-max-voltage = <1375000>; + anatop-enable-bit = <0>; }; regulator-3p0 { @@ -601,6 +602,7 @@ anatop-min-bit-val = <0>; anatop-min-voltage = <2625000>; anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; }; regulator-2p5 { @@ -615,6 +617,7 @@ anatop-min-bit-val = <0>; anatop-min-voltage = <2100000>; anatop-max-voltage = <2875000>; + anatop-enable-bit = <0>; }; reg_arm: regulator-vddcore { diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts index f18e1f1d0ce2..d2be8aa3370b 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts @@ -120,10 +120,16 @@ ethphy0: ethernet-phy@2 { reg = <2>; + micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; }; ethphy1: ethernet-phy@1 { reg = <1>; + micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET2_REF>; + clock-names = "rmii-ref"; }; }; }; diff --git a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi index 51095df33a90..aec5ccce0321 100644 --- a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi @@ -120,7 +120,7 @@ #address-cells = <1>; #size-cells = <0>; - brcmf: bcrmf@1 { + brcmf: wifi@1 { compatible = "brcm,bcm4329-fmac"; reg = <1>; interrupt-parent = <&gpio2>; diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts index 7c5dd1b316ca..28d055e3f301 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts +++ b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts @@ -78,7 +78,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio &pinctrl_etnphy1_rst>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; phy-supply = <®_3v3_etn>; phy-handle = <&etnphy1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi index c784a0b75ca0..ec745eb3b6a8 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi @@ -173,8 +173,7 @@ regulator-max-microvolt = <3300000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan_xcvr>; - gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; - enable-active-low; + gpio = <&gpio3 5 GPIO_ACTIVE_LOW>; }; reg_lcd_pwr: regulator-lcdpwr { @@ -308,7 +307,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio &pinctrl_etnphy0_rst>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; phy-supply = <®_3v3_etn>; phy-handle = <&etnphy0>; status = "okay"; @@ -343,7 +342,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet2 &pinctrl_etnphy1_rst>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; phy-supply = <®_3v3_etn>; phy-handle = <&etnphy1>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index b9d7d2d09402..6da2b77edd46 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -542,6 +542,7 @@ anatop-min-bit-val = <0>; anatop-min-voltage = <2625000>; anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; }; reg_arm: regulator-vddcore { diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index 2d87489f9105..d7753f79937a 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -43,7 +43,7 @@ / { bl: backlight { compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; }; reg_module_3v3: regulator-module-3v3 { diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index 5d98e2b5d54b..e7998308861f 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -67,7 +67,7 @@ backlight-j20 { compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; status = "okay"; @@ -279,7 +279,7 @@ status = "okay"; rtc@68 { - compatible = "rv4162"; + compatible = "microcrystal,rv4162"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2_rv4162>; reg = <0x68>; @@ -738,7 +738,7 @@ pinctrl_wdog1: wdog1grp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x75 + MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x75 >; }; }; diff --git a/arch/arm/boot/dts/imx7d-pico.dts b/arch/arm/boot/dts/imx7d-pico.dts new file mode 100644 index 000000000000..e78c2c9cc28a --- /dev/null +++ b/arch/arm/boot/dts/imx7d-pico.dts @@ -0,0 +1,403 @@ +/* + * Copyright 2017 NXP + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx7d.dtsi" + +/ { + model = "Technexion Pico i.MX7D Board"; + compatible = "technexion,imx7d-pico", "fsl,imx7d"; + + memory { + reg = <0x80000000 0x80000000>; + }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 5 GPIO_ACTIVE_LOW>; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_vref_1v8: regulator-vref-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vref-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "imx7-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,cpu { + sound-dai = <&sai1>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + }; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + status = "okay"; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + #sound-dai-cells = <0>; + reg = <0x0a>; + compatible = "fsl,sgtl5000"; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_vref_1v8>; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + pmic: pfuze3000@08 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + /* use sw1c_reg to align with pfuze100/pfuze200 */ + sw1c_reg: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen2_reg: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>, + <&clks IMX7D_SAI1_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <24576000>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + no-1-8-v; + fsl,tuning-step = <2>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3 + MX7D_PAD_SD2_WP__ENET1_MDC 0x3 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__I2C1_SDA 0x4000007f + MX7D_PAD_UART1_RX_DATA__I2C1_SCL 0x4000007f + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f + MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f + MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f + MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30 + MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x79 + MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x79 + >; + }; + + pinctrl_usbotg1_pwr: usbotg_pwr { + fsl,pins = < + MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x14 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 + MX7D_PAD_SD3_CLK__SD3_CLK 0x19 + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5a + MX7D_PAD_SD3_CLK__SD3_CLK 0x1a + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5b + MX7D_PAD_SD3_CLK__SD3_CLK 0x1b + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b + >; + }; +}; + +&iomuxc_lpsr { + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h index f6f7e78f8820..f2493bc63da4 100644 --- a/arch/arm/boot/dts/imx7d-pinfunc.h +++ b/arch/arm/boot/dts/imx7d-pinfunc.h @@ -17,9 +17,9 @@ #define MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x0000 0x0030 0x0000 0x0 0x0 #define MX7D_PAD_LPSR_GPIO1_IO00__PWM4_OUT 0x0000 0x0030 0x0000 0x1 0x0 -#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_ANY 0x0000 0x0030 0x0000 0x2 0x0 -#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x0000 0x0030 0x0000 0x3 0x0 -#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG__RST_B_DEB 0x0000 0x0030 0x0000 0x4 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_ANY 0x0000 0x0030 0x0000 0x2 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x0000 0x0030 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG__RST_B_DEB 0x0000 0x0030 0x0000 0x4 0x0 #define MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x0004 0x0034 0x0000 0x0 0x0 #define MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x0004 0x0034 0x0000 0x1 0x0 #define MX7D_PAD_LPSR_GPIO1_IO01__CCM_ENET_REF_CLK3 0x0004 0x0034 0x0000 0x2 0x0 diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 5be01a1bf840..54c45402286b 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -52,47 +52,70 @@ reg = <0x80000000 0x80000000>; }; - regulators { - compatible = "simple-bus"; + spi4 { + compatible = "spi-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi4>; + gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; #address-cells = <1>; #size-cells = <0>; - reg_usb_otg1_vbus: regulator@0 { - compatible = "regulator-fixed"; + extended_io: gpio-expander@0 { + compatible = "fairchild,74hc595"; + gpio-controller; + #gpio-cells = <2>; reg = <0>; - regulator-name = "usb_otg1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; - enable-active-high; + registers-number = <1>; + spi-max-frequency = <100000>; }; + }; - reg_usb_otg2_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "usb_otg2_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_can2_3v3: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "can2-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 7 GPIO_ACTIVE_LOW>; - }; + reg_usb_otg2_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_vref_1v8: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "vref-1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; + reg_can2_3v3: regulator-can2-3v3 { + compatible = "regulator-fixed"; + regulator-name = "can2-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; + + reg_vref_1v8: regulator-vref-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vref-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_brcm: regulator-brcm { + compatible = "regulator-fixed"; + gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-name = "brcm_reg"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_brcm_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <200000>; }; }; @@ -328,6 +351,11 @@ }; }; +&pcie { + reset-gpio = <&extended_io 1 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; @@ -342,6 +370,15 @@ status = "okay"; }; +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + uart-has-rtscts; + status = "okay"; +}; + &usbotg1 { vbus-supply = <®_usb_otg1_vbus>; status = "okay"; @@ -363,6 +400,19 @@ status = "okay"; }; +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + wakeup-source; + keep-power-in-suspend; + non-removable; + vmmc-supply = <®_brcm>; + fsl,tuning-step = <2>; + status = "okay"; +}; + &usdhc3 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3>; @@ -387,6 +437,12 @@ pinctrl-0 = <&pinctrl_hog>; imx7d-sdb { + pinctrl_brcm_reg: brcmreggrp { + fsl,pins = < + MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x14 + >; + }; + pinctrl_ecspi3: ecspi3grp { fsl,pins = < MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO 0x2 @@ -554,7 +610,6 @@ MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 - MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x59 /* WL_REG_ON */ >; }; @@ -634,7 +689,7 @@ &iomuxc_lpsr { pinctrl_wdog: wdoggrp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x74 + MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74 >; }; @@ -642,5 +697,13 @@ fsl,pins = < MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x110b0 >; + + pinctrl_spi4: spi4grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59 + MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x59 + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x59 + >; + }; }; }; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index f6dee41a05d9..f46814a7ea44 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -42,6 +42,7 @@ */ #include "imx7s.dtsi" +#include <dt-bindings/reset/imx7-reset.h> / { cpus { @@ -127,6 +128,42 @@ fsl,num-rx-queues=<3>; status = "disabled"; }; + + pcie: pcie@0x33800000 { + compatible = "fsl,imx7d-pcie", "snps,dw-pcie"; + reg = <0x33800000 0x4000>, + <0x4ff00000 0x80000>; + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */ + num-lanes = <1>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>, + <&clks IMX7D_PCIE_PHY_ROOT_CLK>; + clock-names = "pcie", "pcie_bus", "pcie_phy"; + assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>, + <&clks IMX7D_PCIE_PHY_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + + fsl,max-link-speed = <2>; + power-domains = <&pgc_pcie_phy>; + resets = <&src IMX7_RESET_PCIEPHY>, + <&src IMX7_RESET_PCIE_CTRL_APPS_EN>; + reset-names = "pciephy", "apps"; + status = "disabled"; + }; }; &ca_funnel_ports { diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts index d5237fd0fa65..07b63f8b7314 100644 --- a/arch/arm/boot/dts/imx7s-warp.dts +++ b/arch/arm/boot/dts/imx7s-warp.dts @@ -295,6 +295,7 @@ assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; assigned-clock-rates = <400000000>; bus-width = <8>; + no-1-8-v; fsl,tuning-step = <2>; non-removable; status = "okay"; @@ -442,7 +443,7 @@ &iomuxc_lpsr { pinctrl_wdog: wdoggrp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x74 + MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74 >; }; }; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index c4f12fd2e044..4cf6c458b583 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -42,6 +42,7 @@ */ #include <dt-bindings/clock/imx7d-clock.h> +#include <dt-bindings/power/imx7-power.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -119,7 +120,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; - interrupt-parent = <&intc>; + interrupt-parent = <&gpc>; ranges; funnel@30041000 { @@ -301,6 +302,7 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; #interrupt-cells = <3>; interrupt-controller; + interrupt-parent = <&intc>; reg = <0x31001000 0x1000>, <0x31002000 0x2000>, <0x31004000 0x2000>, @@ -309,6 +311,7 @@ timer { compatible = "arm,armv7-timer"; + interrupt-parent = <&intc>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -488,7 +491,8 @@ }; gpr: iomuxc-gpr@30340000 { - compatible = "fsl,imx7d-iomuxc-gpr", "syscon"; + compatible = "fsl,imx7d-iomuxc-gpr", + "fsl,imx6q-iomuxc-gpr", "syscon"; reg = <0x30340000 0x10000>; }; @@ -516,6 +520,7 @@ anatop-min-bit-val = <8>; anatop-min-voltage = <800000>; anatop-max-voltage = <1200000>; + anatop-enable-bit = <0>; }; }; @@ -563,6 +568,27 @@ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; #reset-cells = <1>; }; + + gpc: gpc@303a0000 { + compatible = "fsl,imx7d-gpc"; + reg = <0x303a0000 0x10000>; + interrupt-controller; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <3>; + interrupt-parent = <&intc>; + #power-domain-cells = <1>; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + pgc_pcie_phy: pgc-power-domain@IMX7_POWER_DOMAIN_PCIE_PHY { + #power-domain-cells = <0>; + reg = <IMX7_POWER_DOMAIN_PCIE_PHY>; + power-supply = <®_1p0d>; + }; + }; + }; }; aips2: aips-bus@30400000 { @@ -609,7 +635,7 @@ clocks = <&clks IMX7D_PWM1_ROOT_CLK>, <&clks IMX7D_PWM1_ROOT_CLK>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -620,7 +646,7 @@ clocks = <&clks IMX7D_PWM2_ROOT_CLK>, <&clks IMX7D_PWM2_ROOT_CLK>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -631,7 +657,7 @@ clocks = <&clks IMX7D_PWM3_ROOT_CLK>, <&clks IMX7D_PWM3_ROOT_CLK>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -642,7 +668,7 @@ clocks = <&clks IMX7D_PWM4_ROOT_CLK>, <&clks IMX7D_PWM4_ROOT_CLK>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -934,8 +960,8 @@ compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; reg = <0x30b40000 0x10000>; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>, + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>, <&clks IMX7D_USDHC1_ROOT_CLK>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; @@ -946,8 +972,8 @@ compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; reg = <0x30b50000 0x10000>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>, + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>, <&clks IMX7D_USDHC2_ROOT_CLK>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; @@ -958,8 +984,8 @@ compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; reg = <0x30b60000 0x10000>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>, + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>, <&clks IMX7D_USDHC3_ROOT_CLK>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index 692fcbb1434a..61883cb969d2 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -20,7 +20,7 @@ compatible = "ti,k2g-evm", "ti,k2g", "ti,keystone"; model = "Texas Instruments K2G General Purpose EVM"; - memory { + memory@800000000 { device_type = "memory"; reg = <0x00000008 0x00000000 0x00000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/keystone-k2g-ice.dts b/arch/arm/boot/dts/keystone-k2g-ice.dts new file mode 100644 index 000000000000..d820d37b5148 --- /dev/null +++ b/arch/arm/boot/dts/keystone-k2g-ice.dts @@ -0,0 +1,35 @@ +/* + * Device Tree Source for K2G Industrial Communication Engine EVM + * + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0 + */ +/dts-v1/; + +#include "keystone-k2g.dtsi" + +/ { + compatible = "ti,k2g-ice", "ti,k2g", "ti,keystone"; + model = "Texas Instruments K2G Industrial Communication EVM"; + + memory@800000000 { + device_type = "memory"; + reg = <0x00000008 0x00000000 0x00000000 0x20000000>; + }; +}; + +&k2g_pinctrl { + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x11cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi index f59567fe7d91..a789f75a1ed5 100644 --- a/arch/arm/boot/dts/keystone-k2g.dtsi +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -15,7 +15,6 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/keystone.h> -#include "skeleton.dtsi" / { compatible = "ti,k2g","ti,keystone"; @@ -24,6 +23,8 @@ #size-cells = <2>; interrupt-parent = <&gic>; + chosen { }; + aliases { serial0 = &uart0; }; diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi index b6f26824e83a..66f615a74118 100644 --- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi @@ -137,8 +137,8 @@ netcp: netcp@26000000 { /* NetCP address range */ ranges = <0 0x26000000 0x1000000>; - clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>, <&clkosr>; - clock-names = "pa_clk", "ethss_clk", "cpts", "osr_clk"; + clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>; + clock-names = "pa_clk", "ethss_clk", "cpts"; dma-coherent; ti,navigator-dmas = <&dma_gbe 0>, diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi index b58e7ebc0919..148650406cf7 100644 --- a/arch/arm/boot/dts/keystone-k2l.dtsi +++ b/arch/arm/boot/dts/keystone-k2l.dtsi @@ -232,6 +232,14 @@ }; }; + osr: sram@70000000 { + compatible = "mmio-sram"; + reg = <0x70000000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&clkosr>; + }; + dspgpio0: keystone_dsp_gpio@02620240 { compatible = "ti,keystone-dsp-gpio"; gpio-controller; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index 94e49f32d5f9..c75da5f0ca48 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -141,7 +141,7 @@ partition@d4000 { label = "test"; - reg = <0xd4000 0x24000>; + reg = <0xd4000 0x20000>; }; partition@f4000 { diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index efe53998c961..6d89736c7b44 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -7,6 +7,10 @@ #include <dt-bindings/input/input.h> / { + chosen { + stdout-path = &uart1; + }; + cpus { cpu@0 { cpu0-supply = <&vcc>; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 45ea57fafa18..7bb9df2c1460 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -75,7 +75,7 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0xf00>; - clocks = <&cluster1_clk>; + clocks = <&clockgen 1 0>; #cooling-cells = <2>; }; @@ -83,10 +83,17 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0xf01>; - clocks = <&cluster1_clk>; + clocks = <&clockgen 1 0>; }; }; + sysclk: sysclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "sysclk"; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, @@ -165,7 +172,7 @@ <0x0 0x20220520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; dma-coherent; status = "disabled"; }; @@ -216,41 +223,10 @@ }; clockgen: clocking@1ee1000 { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x1ee1000 0x10000>; - - sysclk: sysclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-output-names = "sysclk"; - }; - - cga_pll1: pll@800 { - compatible = "fsl,qoriq-core-pll-2.0"; - #clock-cells = <1>; - reg = <0x800 0x10>; - clocks = <&sysclk>; - clock-output-names = "cga-pll1", "cga-pll1-div2", - "cga-pll1-div4"; - }; - - platform_clk: pll@c00 { - compatible = "fsl,qoriq-core-pll-2.0"; - #clock-cells = <1>; - reg = <0xc00 0x10>; - clocks = <&sysclk>; - clock-output-names = "platform-clk", "platform-clk-div2"; - }; - - cluster1_clk: clk0c0@0 { - compatible = "fsl,qoriq-core-mux-2.0"; - #clock-cells = <0>; - reg = <0x0 0x10>; - clock-names = "pll1cga", "pll1cga-div2", "pll1cga-div4"; - clocks = <&cga_pll1 0>, <&cga_pll1 1>, <&cga_pll1 2>; - clock-output-names = "cluster1-clk"; - }; + compatible = "fsl,ls1021a-clockgen"; + reg = <0x0 0x1ee1000 0x0 0x1000>; + #clock-cells = <2>; + clocks = <&sysclk>; }; tmu: tmu@1f00000 { @@ -338,7 +314,7 @@ reg = <0x0 0x2100000 0x0 0x10000>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; spi-num-chipselects = <6>; big-endian; status = "disabled"; @@ -351,7 +327,7 @@ reg = <0x0 0x2110000 0x0 0x10000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; spi-num-chipselects = <6>; big-endian; status = "disabled"; @@ -364,7 +340,7 @@ reg = <0x0 0x2180000 0x0 0x10000>; interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; status = "disabled"; }; @@ -375,7 +351,7 @@ reg = <0x0 0x2190000 0x0 0x10000>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; status = "disabled"; }; @@ -386,7 +362,7 @@ reg = <0x0 0x21a0000 0x0 0x10000>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; status = "disabled"; }; @@ -479,7 +455,7 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2960000 0x0 0x1000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; clock-names = "ipg"; status = "disabled"; }; @@ -488,7 +464,7 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2970000 0x0 0x1000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; clock-names = "ipg"; status = "disabled"; }; @@ -497,7 +473,7 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2980000 0x0 0x1000>; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; clock-names = "ipg"; status = "disabled"; }; @@ -506,7 +482,7 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2990000 0x0 0x1000>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; clock-names = "ipg"; status = "disabled"; }; @@ -515,7 +491,7 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x29a0000 0x0 0x1000>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; clock-names = "ipg"; status = "disabled"; }; @@ -524,7 +500,7 @@ compatible = "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; clock-names = "wdog-en"; big-endian; }; @@ -534,8 +510,8 @@ compatible = "fsl,vf610-sai"; reg = <0x0 0x2b50000 0x0 0x10000>; interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&platform_clk 1>, <&platform_clk 1>, - <&platform_clk 1>, <&platform_clk 1>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 47>, @@ -548,8 +524,8 @@ compatible = "fsl,vf610-sai"; reg = <0x0 0x2b60000 0x0 0x10000>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&platform_clk 1>, <&platform_clk 1>, - <&platform_clk 1>, <&platform_clk 1>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 45>, @@ -569,16 +545,16 @@ dma-channels = <32>; big-endian; clock-names = "dmamux0", "dmamux1"; - clocks = <&platform_clk 1>, - <&platform_clk 1>; + clocks = <&clockgen 4 1>, + <&clockgen 4 1>; }; dcu: dcu@2ce0000 { compatible = "fsl,ls1021a-dcu"; reg = <0x0 0x2ce0000 0x0 0x10000>; interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&platform_clk 0>, - <&platform_clk 0>; + clocks = <&clockgen 4 0>, + <&clockgen 4 0>; clock-names = "dcu", "pix"; big-endian; status = "disabled"; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 8c77c87660cd..15204e44161d 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -45,6 +45,8 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> /include/ "skeleton.dtsi" / { @@ -65,99 +67,158 @@ #interrupt-cells = <3>; }; - timer@c1109940 { - compatible = "amlogic,meson6-timer"; - reg = <0xc1109940 0x18>; - interrupts = <0 10 1>; - }; - soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - wdt: watchdog@c1109900 { - compatible = "amlogic,meson6-wdt"; - reg = <0xc1109900 0x8>; - interrupts = <0 0 1>; - }; - - uart_AO: serial@c81004c0 { - compatible = "amlogic,meson-uart"; - reg = <0xc81004c0 0x18>; - interrupts = <0 90 1>; - clocks = <&clk81>; - status = "disabled"; - }; - - uart_A: serial@c11084c0 { - compatible = "amlogic,meson-uart"; - reg = <0xc11084c0 0x18>; - interrupts = <0 26 1>; - clocks = <&clk81>; - status = "disabled"; - }; - - uart_B: serial@c11084dc { - compatible = "amlogic,meson-uart"; - reg = <0xc11084dc 0x18>; - interrupts = <0 75 1>; - clocks = <&clk81>; - status = "disabled"; - }; - - uart_C: serial@c1108700 { - compatible = "amlogic,meson-uart"; - reg = <0xc1108700 0x18>; - interrupts = <0 93 1>; - clocks = <&clk81>; - status = "disabled"; - }; - - i2c_AO: i2c@c8100500 { - compatible = "amlogic,meson6-i2c"; - reg = <0xc8100500 0x20>; - interrupts = <0 92 1>; - clocks = <&clk81>; + cbus: cbus@c1100000 { + compatible = "simple-bus"; + reg = <0xc1100000 0x200000>; #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; + #size-cells = <1>; + ranges = <0x0 0xc1100000 0x200000>; + + hwrng: rng@8100 { + compatible = "amlogic,meson-rng"; + reg = <0x8100 0x8>; + }; + + uart_A: serial@84c0 { + compatible = "amlogic,meson-uart"; + reg = <0x84c0 0x18>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + uart_B: serial@84dc { + compatible = "amlogic,meson-uart"; + reg = <0x84dc 0x18>; + interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + i2c_A: i2c@8500 { + compatible = "amlogic,meson6-i2c"; + reg = <0x8500 0x20>; + interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + saradc: adc@8680 { + compatible = "amlogic,meson-saradc"; + reg = <0x8680 0x34>; + #io-channel-cells = <1>; + interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + uart_C: serial@8700 { + compatible = "amlogic,meson-uart"; + reg = <0x8700 0x18>; + interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + i2c_B: i2c@87c0 { + compatible = "amlogic,meson6-i2c"; + reg = <0x87c0 0x20>; + interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usb0_phy: phy@8800 { + compatible = "amlogic,meson-mx-usb2-phy"; + #phy-cells = <0>; + reg = <0x8800 0x20>; + status = "disabled"; + }; + + usb1_phy: phy@8820 { + compatible = "amlogic,meson-mx-usb2-phy"; + #phy-cells = <0>; + reg = <0x8820 0x20>; + status = "disabled"; + }; + + spifc: spi@8c80 { + compatible = "amlogic,meson6-spifc"; + reg = <0x8c80 0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + wdt: watchdog@9900 { + compatible = "amlogic,meson6-wdt"; + reg = <0x9900 0x8>; + interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; + }; + + timer@9940 { + compatible = "amlogic,meson6-timer"; + reg = <0x9940 0x18>; + interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>; + }; }; - i2c_A: i2c@c1108500 { - compatible = "amlogic,meson6-i2c"; - reg = <0xc1108500 0x20>; - interrupts = <0 21 1>; - clocks = <&clk81>; + aobus: aobus@c8100000 { + compatible = "simple-bus"; + reg = <0xc8100000 0x100000>; #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; + #size-cells = <1>; + ranges = <0x0 0xc8100000 0x100000>; + + ir_receiver: ir-receiver@480 { + compatible= "amlogic,meson6-ir"; + reg = <0x480 0x20>; + interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + uart_AO: serial@4c0 { + compatible = "amlogic,meson-uart"; + reg = <0x4c0 0x18>; + interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + i2c_AO: i2c@500 { + compatible = "amlogic,meson6-i2c"; + reg = <0x500 0x20>; + interrupts = <GIC_SPI 92 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; - i2c_B: i2c@c11087c0 { - compatible = "amlogic,meson6-i2c"; - reg = <0xc11087c0 0x20>; - interrupts = <0 128 1>; - clocks = <&clk81>; + usb0: usb@c9040000 { + compatible = "snps,dwc2"; #address-cells = <1>; #size-cells = <0>; + reg = <0xc9040000 0x40000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>; + phys = <&usb0_phy>; + phy-names = "usb2-phy"; + dr_mode = "host"; status = "disabled"; }; - ir_receiver: ir-receiver@c8100480 { - compatible= "amlogic,meson6-ir"; - reg = <0xc8100480 0x20>; - interrupts = <0 15 1>; - status = "disabled"; - }; - - spifc: spi@c1108c80 { - compatible = "amlogic,meson6-spifc"; - reg = <0xc1108c80 0x80>; + usb1: usb@c90c0000 { + compatible = "snps,dwc2"; #address-cells = <1>; #size-cells = <0>; - clocks = <&clk81>; + reg = <0xc90c0000 0x40000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>; + phys = <&usb1_phy>; + phy-names = "usb2-phy"; + dr_mode = "host"; status = "disabled"; }; @@ -165,10 +226,8 @@ compatible = "amlogic,meson6-dwmac", "snps,dwmac"; reg = <0xc9410000 0x10000 0xc1108108 0x4>; - interrupts = <0 8 1>; + interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>; interrupt-names = "macirq"; - clocks = <&clk81>; - clock-names = "stmmaceth"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts index 1237faa63ce6..9444b0d9628f 100644 --- a/arch/arm/boot/dts/meson6-atv1200.dts +++ b/arch/arm/boot/dts/meson6-atv1200.dts @@ -46,7 +46,7 @@ */ /dts-v1/; -/include/ "meson6.dtsi" +#include "meson6.dtsi" / { model = "Geniatech ATV1200"; diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi index 8b33be15af94..8557b6117a4b 100644 --- a/arch/arm/boot/dts/meson6.dtsi +++ b/arch/arm/boot/dts/meson6.dtsi @@ -45,14 +45,12 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "meson.dtsi" +#include "meson.dtsi" / { model = "Amlogic Meson6 SoC"; compatible = "amlogic,meson6"; - interrupt-parent = <&gic>; - cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index ebc763eab195..cada35828931 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -43,15 +43,14 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/clock/meson8b-clkc.h> #include <dt-bindings/gpio/meson8-gpio.h> -/include/ "meson.dtsi" +#include "meson.dtsi" / { model = "Amlogic Meson8 SoC"; compatible = "amlogic,meson8"; - interrupt-parent = <&gic>; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -85,34 +84,68 @@ }; }; - clk81: clk@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <141666666>; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* 2 MiB reserved for Hardware ROM Firmware? */ + hwrom@0 { + reg = <0x0 0x200000>; + no-map; + }; + + /* + * 1 MiB reserved for the "ARM Power Firmware": this is ARM + * code which is responsible for system suspend. It loads a + * piece of ARC code ("arc_power" in the vendor u-boot tree) + * into SRAM, executes that and shuts down the (last) ARM core. + * The arc_power firmware then checks various wakeup sources + * (IR remote receiver, HDMI CEC, WIFI and Bluetooth wakeup or + * simply the power key) and re-starts the ARM core once it + * detects a wakeup request. + */ + power-firmware@4f00000 { + reg = <0x4f00000 0x100000>; + no-map; + }; + }; + + scu@c4300000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xc4300000 0x100>; }; +}; /* end of / */ - pinctrl_cbus: pinctrl@c1109880 { - compatible = "amlogic,meson8-cbus-pinctrl"; - reg = <0xc1109880 0x10>; +&aobus { + pinctrl_aobus: pinctrl@84 { + compatible = "amlogic,meson8-aobus-pinctrl"; + reg = <0x84 0xc>; #address-cells = <1>; #size-cells = <1>; ranges; - gpio: banks@c11080b0 { - reg = <0xc11080b0 0x28>, - <0xc11080e8 0x18>, - <0xc1108120 0x18>, - <0xc1108030 0x30>; - reg-names = "mux", "pull", "pull-enable", "gpio"; + gpio_ao: ao-bank@14 { + reg = <0x14 0x4>, + <0x2c 0x4>, + <0x24 0x8>; + reg-names = "mux", "pull", "gpio"; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pinctrl_cbus 0 0 120>; + gpio-ranges = <&pinctrl_aobus 0 120 16>; }; - spi_nor_pins: nor { + uart_ao_a_pins: uart_ao_a { mux { - groups = "nor_d", "nor_q", "nor_c", "nor_cs"; - function = "nor"; + groups = "uart_tx_ao_a", "uart_rx_ao_a"; + function = "uart_ao"; + }; + }; + + i2c_ao_pins: i2c_mst_ao { + mux { + groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao"; + function = "i2c_mst_ao"; }; }; @@ -123,47 +156,168 @@ }; }; - eth_pins: ethernet { + pwm_f_ao_pins: pwm-f-ao { mux { - groups = "eth_tx_clk_50m", "eth_tx_en", - "eth_txd1", "eth_txd0", - "eth_rx_clk_in", "eth_rx_dv", - "eth_rxd1", "eth_rxd0", "eth_mdio", - "eth_mdc"; - function = "ethernet"; + groups = "pwm_f_ao"; + function = "pwm_f_ao"; }; }; }; +}; - pinctrl_aobus: pinctrl@c8100084 { - compatible = "amlogic,meson8-aobus-pinctrl"; - reg = <0xc8100084 0xc>; +&cbus { + clkc: clock-controller@4000 { + #clock-cells = <1>; + compatible = "amlogic,meson8-clkc"; + reg = <0x8000 0x4>, <0x4000 0x460>; + }; + + pinctrl_cbus: pinctrl@9880 { + compatible = "amlogic,meson8-cbus-pinctrl"; + reg = <0x9880 0x10>; #address-cells = <1>; #size-cells = <1>; ranges; - gpio_ao: ao-bank@c1108030 { - reg = <0xc8100014 0x4>, - <0xc810002c 0x4>, - <0xc8100024 0x8>; - reg-names = "mux", "pull", "gpio"; + gpio: banks@80b0 { + reg = <0x80b0 0x28>, + <0x80e8 0x18>, + <0x8120 0x18>, + <0x8030 0x30>; + reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pinctrl_aobus 0 120 16>; + gpio-ranges = <&pinctrl_cbus 0 0 120>; }; - uart_ao_a_pins: uart_ao_a { + sd_a_pins: sd-a { mux { - groups = "uart_tx_ao_a", "uart_rx_ao_a"; - function = "uart_ao"; + groups = "sd_d0_a", "sd_d1_a", "sd_d2_a", + "sd_d3_a", "sd_clk_a", "sd_cmd_a"; + function = "sd_a"; }; }; - i2c_ao_pins: i2c_mst_ao { + sd_b_pins: sd-b { mux { - groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao"; - function = "i2c_mst_ao"; + groups = "sd_d0_b", "sd_d1_b", "sd_d2_b", + "sd_d3_b", "sd_clk_b", "sd_cmd_b"; + function = "sd_b"; + }; + }; + + sd_c_pins: sd-c { + mux { + groups = "sd_d0_c", "sd_d1_c", "sd_d2_c", + "sd_d3_c", "sd_clk_c", "sd_cmd_c"; + function = "sd_c"; + }; + }; + + spi_nor_pins: nor { + mux { + groups = "nor_d", "nor_q", "nor_c", "nor_cs"; + function = "nor"; + }; + }; + + eth_pins: ethernet { + mux { + groups = "eth_tx_clk_50m", "eth_tx_en", + "eth_txd1", "eth_txd0", + "eth_rx_clk_in", "eth_rx_dv", + "eth_rxd1", "eth_rxd0", "eth_mdio", + "eth_mdc"; + function = "ethernet"; + }; + }; + + pwm_e_pins: pwm-e { + mux { + groups = "pwm_e"; + function = "pwm_e"; }; }; }; -}; /* end of / */ +}; + +ðmac { + clocks = <&clkc CLKID_ETH>; + clock-names = "stmmaceth"; +}; + +&hwrng { + compatible = "amlogic,meson8-rng", "amlogic,meson-rng"; + clocks = <&clkc CLKID_RNG0>; + clock-names = "core"; +}; + +&i2c_AO { + clocks = <&clkc CLKID_CLK81>; +}; + +&i2c_A { + clocks = <&clkc CLKID_CLK81>; +}; + +&i2c_B { + clocks = <&clkc CLKID_CLK81>; +}; + +&L2 { + arm,data-latency = <3 3 3>; + arm,tag-latency = <2 2 2>; + arm,filter-ranges = <0x100000 0xc0000000>; +}; + +&saradc { + compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc"; + clocks = <&clkc CLKID_XTAL>, + <&clkc CLKID_SAR_ADC>, + <&clkc CLKID_SANA>; + clock-names = "clkin", "core", "sana"; +}; + +&spifc { + clocks = <&clkc CLKID_CLK81>; +}; + +&uart_AO { + clocks = <&clkc CLKID_CLK81>; +}; + +&uart_A { + clocks = <&clkc CLKID_CLK81>; +}; + +&uart_B { + clocks = <&clkc CLKID_CLK81>; +}; + +&uart_C { + clocks = <&clkc CLKID_CLK81>; +}; + +&usb0 { + compatible = "amlogic,meson8-usb", "snps,dwc2"; + clocks = <&clkc CLKID_USB0_DDR_BRIDGE>; + clock-names = "otg"; +}; + +&usb1 { + compatible = "amlogic,meson8-usb", "snps,dwc2"; + clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; + clock-names = "otg"; +}; + +&usb0_phy { + compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy"; + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>; + clock-names = "usb_general", "usb"; +}; + +&usb1_phy { + compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy"; + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>; + clock-names = "usb_general", "usb"; +}; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 828aa49c678c..72e4f425f190 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -47,11 +47,9 @@ #include <dt-bindings/clock/meson8b-clkc.h> #include <dt-bindings/gpio/meson8b-gpio.h> #include <dt-bindings/reset/amlogic,meson8b-reset.h> -#include "skeleton.dtsi" +#include "meson.dtsi" / { - interrupt-parent = <&gic>; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -85,146 +83,162 @@ }; }; - soc { - compatible = "simple-bus"; + scu@c4300000 { + compatible = "arm,cortex-a5-scu"; + reg = <0xc4300000 0x100>; + }; +}; /* end of / */ + +&aobus { + pinctrl_aobus: pinctrl@84 { + compatible = "amlogic,meson8b-aobus-pinctrl"; + reg = <0x84 0xc>; #address-cells = <1>; #size-cells = <1>; ranges; - L2: l2-cache-controller@c4200000 { - compatible = "arm,pl310-cache"; - reg = <0xc4200000 0x1000>; - cache-unified; - cache-level = <2>; - }; - - gic: interrupt-controller@c4301000 { - compatible = "arm,cortex-a9-gic"; - reg = <0xc4301000 0x1000>, - <0xc4300100 0x0100>; - interrupt-controller; - #interrupt-cells = <3>; - }; - - reset: reset-controller@c1104404 { - compatible = "amlogic,meson8b-reset"; - reg = <0xc1104404 0x20>; - #reset-cells = <1>; - }; - - wdt: watchdog@c1109900 { - compatible = "amlogic,meson8b-wdt"; - reg = <0xc1109900 0x8>; - interrupts = <0 0 1>; + gpio_ao: ao-bank@14 { + reg = <0x14 0x4>, + <0x2c 0x4>, + <0x24 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_aobus 0 130 16>; }; - timer@c1109940 { - compatible = "amlogic,meson6-timer"; - reg = <0xc1109940 0x18>; - interrupts = <0 10 1>; - }; - - uart_AO: serial@c81004c0 { - compatible = "amlogic,meson-uart"; - reg = <0xc81004c0 0x18>; - interrupts = <0 90 1>; - clocks = <&clkc CLKID_CLK81>; - status = "disabled"; - }; - - uart_A: serial@c11084c0 { - compatible = "amlogic,meson-uart"; - reg = <0xc11084c0 0x18>; - interrupts = <0 26 1>; - clocks = <&clkc CLKID_CLK81>; - status = "disabled"; - }; - - uart_B: serial@c11084dc { - compatible = "amlogic,meson-uart"; - reg = <0xc11084dc 0x18>; - interrupts = <0 75 1>; - clocks = <&clkc CLKID_CLK81>; - status = "disabled"; + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_tx_ao_a", "uart_rx_ao_a"; + function = "uart_ao"; + }; }; + }; +}; - uart_C: serial@c1108700 { - compatible = "amlogic,meson-uart"; - reg = <0xc1108700 0x18>; - interrupts = <0 93 1>; - clocks = <&clkc CLKID_CLK81>; - status = "disabled"; - }; +&cbus { + clkc: clock-controller@4000 { + #clock-cells = <1>; + compatible = "amlogic,meson8b-clkc"; + reg = <0x8000 0x4>, <0x4000 0x460>; + }; - clkc: clock-controller@c1104000 { - #clock-cells = <1>; - compatible = "amlogic,meson8b-clkc"; - reg = <0xc1108000 0x4>, <0xc1104000 0x460>; - }; + reset: reset-controller@4404 { + compatible = "amlogic,meson8b-reset"; + reg = <0x4404 0x20>; + #reset-cells = <1>; + }; - pwm_ab: pwm@8550 { - compatible = "amlogic,meson8b-pwm"; - reg = <0xc1108550 0x10>; - #pwm-cells = <3>; - status = "disabled"; - }; + pwm_ab: pwm@8550 { + compatible = "amlogic,meson8b-pwm"; + reg = <0x8550 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; - pwm_cd: pwm@8650 { - compatible = "amlogic,meson8b-pwm"; - reg = <0xc1108650 0x10>; - #pwm-cells = <3>; - status = "disabled"; - }; + pwm_cd: pwm@8650 { + compatible = "amlogic,meson8b-pwm"; + reg = <0x8650 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; - pwm_ef: pwm@86c0 { - compatible = "amlogic,meson8b-pwm"; - reg = <0xc11086c0 0x10>; - #pwm-cells = <3>; - status = "disabled"; - }; + pwm_ef: pwm@86c0 { + compatible = "amlogic,meson8b-pwm"; + reg = <0x86c0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; - pinctrl_cbus: pinctrl@c1109880 { - compatible = "amlogic,meson8b-cbus-pinctrl"; - reg = <0xc1109880 0x10>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - gpio: banks@c11080b0 { - reg = <0xc11080b0 0x28>, - <0xc11080e8 0x18>, - <0xc1108120 0x18>, - <0xc1108030 0x38>; - reg-names = "mux", "pull", "pull-enable", "gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pinctrl_cbus 0 0 130>; - }; - }; + wdt: watchdog@9900 { + compatible = "amlogic,meson8b-wdt"; + reg = <0x9900 0x8>; + interrupts = <0 0 1>; + }; - pinctrl_aobus: pinctrl@c8100084 { - compatible = "amlogic,meson8b-aobus-pinctrl"; - reg = <0xc8100084 0xc>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - gpio_ao: ao-bank@c1108030 { - reg = <0xc8100014 0x4>, - <0xc810002c 0x4>, - <0xc8100024 0x8>; - reg-names = "mux", "pull", "gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pinctrl_aobus 0 130 16>; - }; + pinctrl_cbus: pinctrl@9880 { + compatible = "amlogic,meson8b-cbus-pinctrl"; + reg = <0x9880 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges; - uart_ao_a_pins: uart_ao_a { - mux { - groups = "uart_tx_ao_a", "uart_rx_ao_a"; - function = "uart_ao"; - }; - }; + gpio: banks@80b0 { + reg = <0x80b0 0x28>, + <0x80e8 0x18>, + <0x8120 0x18>, + <0x8030 0x38>; + reg-names = "mux", "pull", "pull-enable", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_cbus 0 0 130>; }; }; -}; /* end of / */ +}; + +ðmac { + clocks = <&clkc CLKID_ETH>; + clock-names = "stmmaceth"; +}; + +&hwrng { + compatible = "amlogic,meson8b-rng", "amlogic,meson-rng"; + clocks = <&clkc CLKID_RNG0>; + clock-names = "core"; +}; + +&L2 { + arm,data-latency = <3 3 3>; + arm,tag-latency = <2 2 2>; + arm,filter-ranges = <0x100000 0xc0000000>; +}; + +&saradc { + compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc"; + clocks = <&clkc CLKID_XTAL>, + <&clkc CLKID_SAR_ADC>, + <&clkc CLKID_SANA>; + clock-names = "clkin", "core", "sana"; +}; + +&uart_AO { + clocks = <&clkc CLKID_CLK81>; +}; + +&uart_A { + clocks = <&clkc CLKID_CLK81>; +}; + +&uart_B { + clocks = <&clkc CLKID_CLK81>; +}; + +&uart_C { + clocks = <&clkc CLKID_CLK81>; +}; + +&usb0 { + compatible = "amlogic,meson8b-usb", "snps,dwc2"; + clocks = <&clkc CLKID_USB0_DDR_BRIDGE>; + clock-names = "otg"; +}; + +&usb1 { + compatible = "amlogic,meson8b-usb", "snps,dwc2"; + clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; + clock-names = "otg"; +}; + +&usb0_phy { + compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy"; + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>; + clock-names = "usb_general", "usb"; + resets = <&reset RESET_USB_OTG>; +}; + +&usb1_phy { + compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy"; + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>; + clock-names = "usb_general", "usb"; + resets = <&reset RESET_USB_OTG>; +}; diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi index f5aeb3959afd..1eb5da1dc8f0 100644 --- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi +++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi @@ -26,6 +26,22 @@ #io-channel-cells = <1>; }; + cpcap_battery: battery { + compatible = "motorola,cpcap-battery"; + interrupts-extended = < + &cpcap 6 0 &cpcap 5 0 &cpcap 3 0 + &cpcap 20 0 &cpcap 54 0 + >; + interrupt-names = + "eol", "lowbph", "lowbpl", + "chrgcurr1", "battdetb"; + io-channels = <&cpcap_adc 0 &cpcap_adc 1 + &cpcap_adc 5 &cpcap_adc 6>; + io-channel-names = "battdetb", "battp", + "chg_isense", "batti"; + power-supplies = <&cpcap_charger>; + }; + cpcap_charger: charger { compatible = "motorola,mapphone-cpcap-charger"; interrupts-extended = < diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi index e86f8c905ac5..1f4c795d3f72 100644 --- a/arch/arm/boot/dts/moxart.dtsi +++ b/arch/arm/boot/dts/moxart.dtsi @@ -58,10 +58,11 @@ }; timer: timer@98400000 { - compatible = "moxa,moxart-timer"; + compatible = "moxa,moxart-timer", "faraday,fttmr010"; reg = <0x98400000 0x42>; interrupts = <19 IRQ_TYPE_EDGE_FALLING>; clocks = <&clk_apb>; + clock-names = "PCLK"; }; gpio: gpio@98700000 { diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts index a4837985b7a7..f48497354221 100644 --- a/arch/arm/boot/dts/mt2701-evb.dts +++ b/arch/arm/boot/dts/mt2701-evb.dts @@ -22,13 +22,95 @@ memory { reg = <0 0x80000000 0 0x40000000>; }; + + sound:sound { + compatible = "mediatek,mt2701-cs42448-machine"; + mediatek,platform = <&afe>; + /* CS42448 Machine name */ + audio-routing = + "Line Out Jack", "AOUT1L", + "Line Out Jack", "AOUT1R", + "Line Out Jack", "AOUT2L", + "Line Out Jack", "AOUT2R", + "Line Out Jack", "AOUT3L", + "Line Out Jack", "AOUT3R", + "Line Out Jack", "AOUT4L", + "Line Out Jack", "AOUT4R", + "AIN1L", "AMIC", + "AIN1R", "AMIC", + "AIN2L", "Tuner In", + "AIN2R", "Tuner In", + "AIN3L", "Satellite Tuner In", + "AIN3R", "Satellite Tuner In", + "AIN3L", "AUX In", + "AIN3R", "AUX In"; + mediatek,audio-codec = <&cs42448>; + mediatek,audio-codec-bt-mrg = <&bt_sco_codec>; + pinctrl-names = "default"; + pinctrl-0 = <&aud_pins_default>; + i2s1-in-sel-gpio1 = <&pio 53 0>; + i2s1-in-sel-gpio2 = <&pio 54 0>; + status = "okay"; + }; + + bt_sco_codec:bt_sco_codec { + compatible = "linux,bt-sco"; + }; }; &auxadc { status = "okay"; }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + cs42448: cs42448@48 { + compatible = "cirrus,cs42448"; + reg = <0x48>; + clocks = <&topckgen CLK_TOP_AUD_I2S1_MCLK>; + clock-names = "mclk"; + }; +}; + &pio { + i2c0_pins_a: i2c0@0 { + pins1 { + pinmux = <MT2701_PIN_75_SDA0__FUNC_SDA0>, + <MT2701_PIN_76_SCL0__FUNC_SCL0>; + bias-disable; + }; + }; + + i2c1_pins_a: i2c1@0 { + pins1 { + pinmux = <MT2701_PIN_57_SDA1__FUNC_SDA1>, + <MT2701_PIN_58_SCL1__FUNC_SCL1>; + bias-disable; + }; + }; + + i2c2_pins_a: i2c2@0 { + pins1 { + pinmux = <MT2701_PIN_77_SDA2__FUNC_SDA2>, + <MT2701_PIN_78_SCL2__FUNC_SCL2>; + bias-disable; + }; + }; + spi_pins_a: spi0@0 { pins_spi { pinmux = <MT2701_PIN_53_SPI0_CSN__FUNC_SPI0_CS>, @@ -39,6 +121,31 @@ }; }; + aud_pins_default: audiodefault { + pins_cmd_dat { + pinmux = <MT2701_PIN_49_I2S0_DATA__FUNC_I2S0_DATA>, + <MT2701_PIN_72_I2S0_DATA_IN__FUNC_I2S0_DATA_IN>, + <MT2701_PIN_73_I2S0_LRCK__FUNC_I2S0_LRCK>, + <MT2701_PIN_74_I2S0_BCK__FUNC_I2S0_BCK>, + <MT2701_PIN_126_I2S0_MCLK__FUNC_I2S0_MCLK>, + <MT2701_PIN_33_I2S1_DATA__FUNC_I2S1_DATA>, + <MT2701_PIN_34_I2S1_DATA_IN__FUNC_I2S1_DATA_IN>, + <MT2701_PIN_35_I2S1_BCK__FUNC_I2S1_BCK>, + <MT2701_PIN_36_I2S1_LRCK__FUNC_I2S1_LRCK>, + <MT2701_PIN_37_I2S1_MCLK__FUNC_I2S1_MCLK>, + <MT2701_PIN_203_PWM0__FUNC_I2S2_DATA>, + <MT2701_PIN_204_PWM1__FUNC_I2S3_DATA>, + <MT2701_PIN_53_SPI0_CSN__FUNC_GPIO53>, + <MT2701_PIN_54_SPI0_CK__FUNC_GPIO54>, + <MT2701_PIN_18_PCM_CLK__FUNC_MRG_CLK>, + <MT2701_PIN_19_PCM_SYNC__FUNC_MRG_SYNC>, + <MT2701_PIN_20_PCM_RX__FUNC_MRG_TX>, + <MT2701_PIN_21_PCM_TX__FUNC_MRG_RX>; + drive-strength = <MTK_DRIVE_12mA>; + bias-pull-down; + }; + }; + spi_pins_b: spi1@0 { pins_spi { pinmux = <MT2701_PIN_7_SPI1_CSN__FUNC_SPI1_CS>, @@ -78,6 +185,31 @@ status = "disabled"; }; +&nor_flash { + pinctrl-names = "default"; + pinctrl-0 = <&nor_pins_default>; + status = "okay"; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + }; +}; + +&pio { + nor_pins_default: nor { + pins1 { + pinmux = <MT2701_PIN_240_EXT_XCS__FUNC_EXT_XCS>, + <MT2701_PIN_241_EXT_SCK__FUNC_EXT_SCK>, + <MT2701_PIN_239_EXT_SDIO0__FUNC_EXT_SDIO0>, + <MT2701_PIN_238_EXT_SDIO1__FUNC_EXT_SDIO1>, + <MT2701_PIN_237_EXT_SDIO2__FUNC_EXT_SDIO2>, + <MT2701_PIN_236_EXT_SDIO3__FUNC_EXT_SDIO3>; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up; + }; + }; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 803721050116..f1efdc63656a 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -16,13 +16,14 @@ #include <dt-bindings/power/mt2701-power.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/memory/mt2701-larb-port.h> #include <dt-bindings/reset/mt2701-resets.h> #include "skeleton64.dtsi" #include "mt2701-pinfunc.h" / { compatible = "mediatek,mt2701"; - interrupt-parent = <&sysirq>; + interrupt-parent = <&cirq>; cpus { #address-cells = <1>; @@ -210,6 +211,16 @@ reg = <0 0x10200100 0 0x1c>; }; + cirq: interrupt-controller@10204000 { + compatible = "mediatek,mt2701-cirq", + "mediatek,mtk-cirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&sysirq>; + reg = <0 0x10204000 0 0x400>; + mediatek,ext-irq-range = <32 200>; + }; + iommu: mmsys_iommu@10205000 { compatible = "mediatek,mt2701-m4u"; reg = <0 0x10205000 0 0x1000>; @@ -286,6 +297,48 @@ status = "disabled"; }; + i2c0: i2c@11007000 { + compatible = "mediatek,mt2701-i2c", + "mediatek,mt6577-i2c"; + reg = <0 0x11007000 0 0x70>, + <0 0x11000200 0 0x80>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@11008000 { + compatible = "mediatek,mt2701-i2c", + "mediatek,mt6577-i2c"; + reg = <0 0x11008000 0 0x70>, + <0 0x11000280 0 0x80>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C1>, <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@11009000 { + compatible = "mediatek,mt2701-i2c", + "mediatek,mt6577-i2c"; + reg = <0 0x11009000 0 0x70>, + <0 0x11000300 0 0x80>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C2>, <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + spi0: spi@1100a000 { compatible = "mediatek,mt2701-spi"; #address-cells = <1>; @@ -334,6 +387,18 @@ status = "disabled"; }; + nor_flash: spi@11014000 { + compatible = "mediatek,mt2701-nor", + "mediatek,mt8173-nor"; + reg = <0 0x11014000 0 0xe0>; + clocks = <&pericfg CLK_PERI_FLASH>, + <&topckgen CLK_TOP_FLASH_SEL>; + clock-names = "spi", "sf"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + spi1: spi@11016000 { compatible = "mediatek,mt2701-spi"; #address-cells = <1>; @@ -360,6 +425,104 @@ status = "disabled"; }; + afe: audio-controller@11220000 { + compatible = "mediatek,mt2701-audio"; + reg = <0 0x11220000 0 0x2000>, + <0 0x112a0000 0 0x20000>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + + clocks = <&infracfg CLK_INFRA_AUDIO>, + <&topckgen CLK_TOP_AUD_MUX1_SEL>, + <&topckgen CLK_TOP_AUD_MUX2_SEL>, + <&topckgen CLK_TOP_AUD_MUX1_DIV>, + <&topckgen CLK_TOP_AUD_MUX2_DIV>, + <&topckgen CLK_TOP_AUD_48K_TIMING>, + <&topckgen CLK_TOP_AUD_44K_TIMING>, + <&topckgen CLK_TOP_AUDPLL_MUX_SEL>, + <&topckgen CLK_TOP_APLL_SEL>, + <&topckgen CLK_TOP_AUD1PLL_98M>, + <&topckgen CLK_TOP_AUD2PLL_90M>, + <&topckgen CLK_TOP_HADDS2PLL_98M>, + <&topckgen CLK_TOP_HADDS2PLL_294M>, + <&topckgen CLK_TOP_AUDPLL>, + <&topckgen CLK_TOP_AUDPLL_D4>, + <&topckgen CLK_TOP_AUDPLL_D8>, + <&topckgen CLK_TOP_AUDPLL_D16>, + <&topckgen CLK_TOP_AUDPLL_D24>, + <&topckgen CLK_TOP_AUDINTBUS_SEL>, + <&clk26m>, + <&topckgen CLK_TOP_SYSPLL1_D4>, + <&topckgen CLK_TOP_AUD_K1_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K2_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K3_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K4_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K5_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K6_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K1_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K2_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K3_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K4_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K5_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K6_SRC_DIV>, + <&topckgen CLK_TOP_AUD_I2S1_MCLK>, + <&topckgen CLK_TOP_AUD_I2S2_MCLK>, + <&topckgen CLK_TOP_AUD_I2S3_MCLK>, + <&topckgen CLK_TOP_AUD_I2S4_MCLK>, + <&topckgen CLK_TOP_AUD_I2S5_MCLK>, + <&topckgen CLK_TOP_AUD_I2S6_MCLK>, + <&topckgen CLK_TOP_ASM_M_SEL>, + <&topckgen CLK_TOP_ASM_H_SEL>, + <&topckgen CLK_TOP_UNIVPLL2_D4>, + <&topckgen CLK_TOP_UNIVPLL2_D2>, + <&topckgen CLK_TOP_SYSPLL_D5>; + + clock-names = "infra_sys_audio_clk", + "top_audio_mux1_sel", + "top_audio_mux2_sel", + "top_audio_mux1_div", + "top_audio_mux2_div", + "top_audio_48k_timing", + "top_audio_44k_timing", + "top_audpll_mux_sel", + "top_apll_sel", + "top_aud1_pll_98M", + "top_aud2_pll_90M", + "top_hadds2_pll_98M", + "top_hadds2_pll_294M", + "top_audpll", + "top_audpll_d4", + "top_audpll_d8", + "top_audpll_d16", + "top_audpll_d24", + "top_audintbus_sel", + "clk_26m", + "top_syspll1_d4", + "top_aud_k1_src_sel", + "top_aud_k2_src_sel", + "top_aud_k3_src_sel", + "top_aud_k4_src_sel", + "top_aud_k5_src_sel", + "top_aud_k6_src_sel", + "top_aud_k1_src_div", + "top_aud_k2_src_div", + "top_aud_k3_src_div", + "top_aud_k4_src_div", + "top_aud_k5_src_div", + "top_aud_k6_src_div", + "top_aud_i2s1_mclk", + "top_aud_i2s2_mclk", + "top_aud_i2s3_mclk", + "top_aud_i2s4_mclk", + "top_aud_i2s5_mclk", + "top_aud_i2s6_mclk", + "top_asm_m_sel", + "top_asm_h_sel", + "top_univpll2_d4", + "top_univpll2_d2", + "top_syspll_d5"; + }; + mmsys: syscon@14000000 { compatible = "mediatek,mt2701-mmsys", "syscon"; reg = <0 0x14000000 0 0x1000>; @@ -392,6 +555,20 @@ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; }; + jpegdec: jpegdec@15004000 { + compatible = "mediatek,mt2701-jpgdec"; + reg = <0 0x15004000 0 0x1000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>; + clocks = <&imgsys CLK_IMG_JPGDEC_SMI>, + <&imgsys CLK_IMG_JPGDEC>; + clock-names = "jpgdec-smi", + "jpgdec"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; + mediatek,larb = <&larb2>; + iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>, + <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; + }; + vdecsys: syscon@16000000 { compatible = "mediatek,mt2701-vdecsys", "syscon"; reg = <0 0x16000000 0 0x1000>; diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 3a9e9b6aea68..d81158b2b02f 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -1,6 +1,7 @@ /* - * Copyright (c) 2016 MediaTek Inc. + * Copyright (c) 2017 MediaTek Inc. * Author: John Crispin <john@phrozen.org> + * Sean Wang <sean.wang@mediatek.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -14,6 +15,12 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/mt2701-clk.h> +#include <dt-bindings/pinctrl/mt7623-pinfunc.h> +#include <dt-bindings/power/mt2701-power.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/reset/mt2701-resets.h> #include "skeleton64.dtsi" / { @@ -53,16 +60,18 @@ #clock-cells = <0>; }; - rtc_clk: dummy32k { + rtc32k: oscillator@1 { compatible = "fixed-clock"; - clock-frequency = <32000>; #clock-cells = <0>; + clock-frequency = <32000>; + clock-output-names = "rtc32k"; }; - uart_clk: dummy26m { + clk26m: oscillator@0 { compatible = "fixed-clock"; - clock-frequency = <26000000>; #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "clk26m"; }; timer { @@ -76,6 +85,65 @@ arm,cpu-registers-not-fw-configured; }; + topckgen: syscon@10000000 { + compatible = "mediatek,mt7623-topckgen", + "mediatek,mt2701-topckgen", + "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg: syscon@10001000 { + compatible = "mediatek,mt7623-infracfg", + "mediatek,mt2701-infracfg", + "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pericfg: syscon@10003000 { + compatible = "mediatek,mt7623-pericfg", + "mediatek,mt2701-pericfg", + "syscon"; + reg = <0 0x10003000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pio: pinctrl@10005000 { + compatible = "mediatek,mt7623-pinctrl", + "mediatek,mt2701-pinctrl"; + reg = <0 0x1000b000 0 0x1000>; + mediatek,pctl-regmap = <&syscfg_pctl_a>; + pins-are-numbered; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + interrupt-parent = <&gic>; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + }; + + syscfg_pctl_a: syscfg@10005000 { + compatible = "mediatek,mt7623-pctl-a-syscfg", "syscon"; + reg = <0 0x10005000 0 0x1000>; + }; + + scpsys: scpsys@10006000 { + compatible = "mediatek,mt7623-scpsys", + "mediatek,mt2701-scpsys", + "syscon"; + #power-domain-cells = <1>; + reg = <0 0x10006000 0 0x1000>; + infracfg = <&infracfg>; + clocks = <&topckgen CLK_TOP_MM_SEL>, + <&topckgen CLK_TOP_MFG_SEL>, + <&topckgen CLK_TOP_ETHIF_SEL>; + clock-names = "mm", "mfg", "ethif"; + }; + watchdog: watchdog@10007000 { compatible = "mediatek,mt7623-wdt", "mediatek,mt6589-wdt"; @@ -87,10 +155,32 @@ "mediatek,mt6577-timer"; reg = <0 0x10008000 0 0x80>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>; - clocks = <&system_clk>, <&rtc_clk>; + clocks = <&system_clk>, <&rtc32k>; clock-names = "system-clk", "rtc-clk"; }; + pwrap: pwrap@1000d000 { + compatible = "mediatek,mt7623-pwrap", + "mediatek,mt2701-pwrap"; + reg = <0 0x1000d000 0 0x1000>; + reg-names = "pwrap"; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + resets = <&infracfg MT2701_INFRA_PMIC_WRAP_RST>; + reset-names = "pwrap"; + clocks = <&infracfg CLK_INFRA_PMICSPI>, + <&infracfg CLK_INFRA_PMICWRAP>; + clock-names = "spi", "wrap"; + }; + + cir: cir@0x10013000 { + compatible = "mediatek,mt7623-cir"; + reg = <0 0x10013000 0 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_IRRX>; + clock-names = "clk"; + status = "disabled"; + }; + sysirq: interrupt-controller@10200100 { compatible = "mediatek,mt7623-sysirq", "mediatek,mt6577-sysirq"; @@ -100,6 +190,32 @@ reg = <0 0x10200100 0 0x1c>; }; + efuse: efuse@10206000 { + compatible = "mediatek,mt7623-efuse", + "mediatek,mt8173-efuse"; + reg = <0 0x10206000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + thermal_calibration_data: calib@424 { + reg = <0x424 0xc>; + }; + }; + + apmixedsys: syscon@10209000 { + compatible = "mediatek,mt7623-apmixedsys", + "mediatek,mt2701-apmixedsys", + "syscon"; + reg = <0 0x10209000 0 0x1000>; + #clock-cells = <1>; + }; + + rng: rng@1020f000 { + compatible = "mediatek,mt7623-rng"; + reg = <0 0x1020f000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_TRNG>; + clock-names = "rng"; + }; + gic: interrupt-controller@10211000 { compatible = "arm,cortex-a7-gic"; interrupt-controller; @@ -111,12 +227,23 @@ <0 0x10216000 0 0x2000>; }; + auxadc: adc@11001000 { + compatible = "mediatek,mt7623-auxadc", + "mediatek,mt2701-auxadc"; + reg = <0 0x11001000 0 0x1000>; + clocks = <&pericfg CLK_PERI_AUXADC>; + clock-names = "main"; + #io-channel-cells = <1>; + }; + uart0: serial@11002000 { compatible = "mediatek,mt7623-uart", "mediatek,mt6577-uart"; reg = <0 0x11002000 0 0x400>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART0_SEL>, + <&pericfg CLK_PERI_UART0>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -125,7 +252,9 @@ "mediatek,mt6577-uart"; reg = <0 0x11003000 0 0x400>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART1_SEL>, + <&pericfg CLK_PERI_UART1>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -134,7 +263,9 @@ "mediatek,mt6577-uart"; reg = <0 0x11004000 0 0x400>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART2_SEL>, + <&pericfg CLK_PERI_UART2>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -143,7 +274,402 @@ "mediatek,mt6577-uart"; reg = <0 0x11005000 0 0x400>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART3_SEL>, + <&pericfg CLK_PERI_UART3>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + pwm: pwm@11006000 { + compatible = "mediatek,mt7623-pwm"; + reg = <0 0x11006000 0 0x1000>; + #pwm-cells = <2>; + clocks = <&topckgen CLK_TOP_PWM_SEL>, + <&pericfg CLK_PERI_PWM>, + <&pericfg CLK_PERI_PWM1>, + <&pericfg CLK_PERI_PWM2>, + <&pericfg CLK_PERI_PWM3>, + <&pericfg CLK_PERI_PWM4>, + <&pericfg CLK_PERI_PWM5>; + clock-names = "top", "main", "pwm1", "pwm2", + "pwm3", "pwm4", "pwm5"; + status = "disabled"; + }; + + i2c0: i2c@11007000 { + compatible = "mediatek,mt7623-i2c", + "mediatek,mt6577-i2c"; + reg = <0 0x11007000 0 0x70>, + <0 0x11000200 0 0x80>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C0>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@11008000 { + compatible = "mediatek,mt7623-i2c", + "mediatek,mt6577-i2c"; + reg = <0 0x11008000 0 0x70>, + <0 0x11000280 0 0x80>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C1>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@11009000 { + compatible = "mediatek,mt7623-i2c", + "mediatek,mt6577-i2c"; + reg = <0 0x11009000 0 0x70>, + <0 0x11000300 0 0x80>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C2>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@1100a000 { + compatible = "mediatek,mt7623-spi", + "mediatek,mt2701-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100a000 0 0x100>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI0_SEL>, + <&pericfg CLK_PERI_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + thermal: thermal@1100b000 { + #thermal-sensor-cells = <1>; + compatible = "mediatek,mt7623-thermal", + "mediatek,mt2701-thermal"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>; + clock-names = "therm", "auxadc"; + resets = <&pericfg MT2701_PERI_THERM_SW_RST>; + reset-names = "therm"; + mediatek,auxadc = <&auxadc>; + mediatek,apmixedsys = <&apmixedsys>; + nvmem-cells = <&thermal_calibration_data>; + nvmem-cell-names = "calibration-data"; + }; + + spi1: spi@11016000 { + compatible = "mediatek,mt7623-spi", + "mediatek,mt2701-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11016000 0 0x100>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI1_SEL>, + <&pericfg CLK_PERI_SPI1>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi2: spi@11017000 { + compatible = "mediatek,mt7623-spi", + "mediatek,mt2701-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11017000 0 0x1000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI2_SEL>, + <&pericfg CLK_PERI_SPI2>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + nandc: nfi@1100d000 { + compatible = "mediatek,mt7623-nfc", + "mediatek,mt2701-nfc"; + reg = <0 0x1100d000 0 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + clocks = <&pericfg CLK_PERI_NFI>, + <&pericfg CLK_PERI_NFI_PAD>; + clock-names = "nfi_clk", "pad_clk"; + status = "disabled"; + ecc-engine = <&bch>; + #address-cells = <1>; + #size-cells = <0>; + }; + + bch: ecc@1100e000 { + compatible = "mediatek,mt7623-ecc", + "mediatek,mt2701-ecc"; + reg = <0 0x1100e000 0 0x1000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_NFI_ECC>; + clock-names = "nfiecc_clk"; + status = "disabled"; + }; + + afe: audio-controller@11220000 { + compatible = "mediatek,mt7623-audio", + "mediatek,mt2701-audio"; + reg = <0 0x11220000 0 0x2000>, + <0 0x112a0000 0 0x20000>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + + clocks = <&infracfg CLK_INFRA_AUDIO>, + <&topckgen CLK_TOP_AUD_MUX1_SEL>, + <&topckgen CLK_TOP_AUD_MUX2_SEL>, + <&topckgen CLK_TOP_AUD_MUX1_DIV>, + <&topckgen CLK_TOP_AUD_MUX2_DIV>, + <&topckgen CLK_TOP_AUD_48K_TIMING>, + <&topckgen CLK_TOP_AUD_44K_TIMING>, + <&topckgen CLK_TOP_AUDPLL_MUX_SEL>, + <&topckgen CLK_TOP_APLL_SEL>, + <&topckgen CLK_TOP_AUD1PLL_98M>, + <&topckgen CLK_TOP_AUD2PLL_90M>, + <&topckgen CLK_TOP_HADDS2PLL_98M>, + <&topckgen CLK_TOP_HADDS2PLL_294M>, + <&topckgen CLK_TOP_AUDPLL>, + <&topckgen CLK_TOP_AUDPLL_D4>, + <&topckgen CLK_TOP_AUDPLL_D8>, + <&topckgen CLK_TOP_AUDPLL_D16>, + <&topckgen CLK_TOP_AUDPLL_D24>, + <&topckgen CLK_TOP_AUDINTBUS_SEL>, + <&clk26m>, + <&topckgen CLK_TOP_SYSPLL1_D4>, + <&topckgen CLK_TOP_AUD_K1_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K2_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K3_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K4_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K5_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K6_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K1_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K2_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K3_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K4_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K5_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K6_SRC_DIV>, + <&topckgen CLK_TOP_AUD_I2S1_MCLK>, + <&topckgen CLK_TOP_AUD_I2S2_MCLK>, + <&topckgen CLK_TOP_AUD_I2S3_MCLK>, + <&topckgen CLK_TOP_AUD_I2S4_MCLK>, + <&topckgen CLK_TOP_AUD_I2S5_MCLK>, + <&topckgen CLK_TOP_AUD_I2S6_MCLK>, + <&topckgen CLK_TOP_ASM_M_SEL>, + <&topckgen CLK_TOP_ASM_H_SEL>, + <&topckgen CLK_TOP_UNIVPLL2_D4>, + <&topckgen CLK_TOP_UNIVPLL2_D2>, + <&topckgen CLK_TOP_SYSPLL_D5>; + + clock-names = "infra_sys_audio_clk", + "top_audio_mux1_sel", + "top_audio_mux2_sel", + "top_audio_mux1_div", + "top_audio_mux2_div", + "top_audio_48k_timing", + "top_audio_44k_timing", + "top_audpll_mux_sel", + "top_apll_sel", + "top_aud1_pll_98M", + "top_aud2_pll_90M", + "top_hadds2_pll_98M", + "top_hadds2_pll_294M", + "top_audpll", + "top_audpll_d4", + "top_audpll_d8", + "top_audpll_d16", + "top_audpll_d24", + "top_audintbus_sel", + "clk_26m", + "top_syspll1_d4", + "top_aud_k1_src_sel", + "top_aud_k2_src_sel", + "top_aud_k3_src_sel", + "top_aud_k4_src_sel", + "top_aud_k5_src_sel", + "top_aud_k6_src_sel", + "top_aud_k1_src_div", + "top_aud_k2_src_div", + "top_aud_k3_src_div", + "top_aud_k4_src_div", + "top_aud_k5_src_div", + "top_aud_k6_src_div", + "top_aud_i2s1_mclk", + "top_aud_i2s2_mclk", + "top_aud_i2s3_mclk", + "top_aud_i2s4_mclk", + "top_aud_i2s5_mclk", + "top_aud_i2s6_mclk", + "top_asm_m_sel", + "top_asm_h_sel", + "top_univpll2_d4", + "top_univpll2_d2", + "top_syspll_d5"; + }; + + mmc0: mmc@11230000 { + compatible = "mediatek,mt7623-mmc", + "mediatek,mt8135-mmc"; + reg = <0 0x11230000 0 0x1000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_MSDC30_0>, + <&topckgen CLK_TOP_MSDC30_0_SEL>; + clock-names = "source", "hclk"; + status = "disabled"; + }; + + mmc1: mmc@11240000 { + compatible = "mediatek,mt7623-mmc", + "mediatek,mt8135-mmc"; + reg = <0 0x11240000 0 0x1000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_MSDC30_1>, + <&topckgen CLK_TOP_MSDC30_1_SEL>; + clock-names = "source", "hclk"; + status = "disabled"; + }; + + usb1: usb@1a1c0000 { + compatible = "mediatek,mt7623-xhci", + "mediatek,mt8173-xhci"; + reg = <0 0x1a1c0000 0 0x1000>, + <0 0x1a1c4700 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>; + clocks = <&hifsys CLK_HIFSYS_USB0PHY>, + <&topckgen CLK_TOP_ETHIF_SEL>; + clock-names = "sys_ck", "free_ck"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; + phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>; + status = "disabled"; + }; + + u3phy1: usb-phy@1a1c4000 { + compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy"; + reg = <0 0x1a1c4000 0 0x0700>; + clocks = <&clk26m>; + clock-names = "u3phya_ref"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + u2port0: usb-phy@1a1c4800 { + reg = <0 0x1a1c4800 0 0x0100>; + #phy-cells = <1>; + status = "okay"; + }; + + u3port0: usb-phy@1a1c4900 { + reg = <0 0x1a1c4900 0 0x0700>; + #phy-cells = <1>; + status = "okay"; + }; + }; + + usb2: usb@1a240000 { + compatible = "mediatek,mt7623-xhci", + "mediatek,mt8173-xhci"; + reg = <0 0x1a240000 0 0x1000>, + <0 0x1a244700 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>; + clocks = <&hifsys CLK_HIFSYS_USB1PHY>, + <&topckgen CLK_TOP_ETHIF_SEL>; + clock-names = "sys_ck", "free_ck"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; + phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>; + status = "disabled"; + }; + + u3phy2: usb-phy@1a244000 { + compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy"; + reg = <0 0x1a244000 0 0x0700>; + clocks = <&clk26m>; + clock-names = "u3phya_ref"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + u2port1: usb-phy@1a244800 { + reg = <0 0x1a244800 0 0x0100>; + #phy-cells = <1>; + status = "okay"; + }; + + u3port1: usb-phy@1a244900 { + reg = <0 0x1a244900 0 0x0700>; + #phy-cells = <1>; + status = "okay"; + }; + }; + + hifsys: syscon@1a000000 { + compatible = "mediatek,mt7623-hifsys", + "mediatek,mt2701-hifsys", + "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + ethsys: syscon@1b000000 { + compatible = "mediatek,mt7623-ethsys", + "mediatek,mt2701-ethsys", + "syscon"; + reg = <0 0x1b000000 0 0x1000>; + #clock-cells = <1>; + }; + + eth: ethernet@1b100000 { + compatible = "mediatek,mt2701-eth", "syscon"; + reg = <0 0x1b100000 0 0x20000>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_ETHIF_SEL>, + <ðsys CLK_ETHSYS_ESW>, + <ðsys CLK_ETHSYS_GP1>, + <ðsys CLK_ETHSYS_GP2>, + <&apmixedsys CLK_APMIXED_TRGPLL>; + clock-names = "ethif", "esw", "gp1", "gp2", "trgpll"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; + mediatek,ethsys = <ðsys>; + mediatek,pctl = <&syscfg_pctl_a>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + crypto: crypto@1b240000 { + compatible = "mediatek,mt7623-crypto"; + reg = <0 0x1b240000 0 0x20000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_ETHIF_SEL>, + <ðsys CLK_ETHSYS_CRYPTO>; + clock-names = "ethif","cryp"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index 57b9a028a49a..fccd5383243c 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -188,7 +188,7 @@ clock-frequency = <400000>; at24@50 { - compatible = "at24,24c02"; + compatible = "atmel,24c02"; pagesize = <16>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi index f330c69cc683..82aa9c4a0f1c 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi @@ -201,7 +201,8 @@ }; &gpmc { - ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ + ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */ + 6 0 0x2c000000 0x1000000>; /* CS6: 16MB for DM9000 */ nand@0,0 { compatible = "ti,omap2-nand"; @@ -256,12 +257,8 @@ reg = <0x680000 0xf980000>; }; }; -}; - -&gpmc { - ranges = <6 0 0x2c000000 0x1000000>; /* CS6: 16MB for DM9000 */ - ethernet@0,0 { + ethernet@6,0 { compatible = "davicom,dm9000"; reg = <6 0x000 2 6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */ diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index 4f9a76544602..c963b31ec3b3 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -34,7 +34,15 @@ >; }; +&hsusb2_phy { + pinctrl-names = "default"; + pinctrl-0 = <&ehci_phy_pins>; +}; + &omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = <&on_board_gpio_61 &hsusb2_pins>; + dss_dpi_pins1: pinmux_dss_dpi_pins2 { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ @@ -98,6 +106,37 @@ >; }; + /* Devices are routed with gpmc_nbe1.gpio_61 to on-board devices */ + on_board_gpio_61: pinmux_ehci_port_select_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4) + >; + }; + + /* Used by OHCI and EHCI. OHCI won't work without external phy */ + hsusb2_pins: pinmux_hsusb2_pins { + pinctrl-single,pins = < + + /* mcspi1_cs3.hsusb2_data2 */ + OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_clk.hsusb2_data7 */ + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_simo.hsusb2_data4 */ + OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_somi.hsusb2_data5 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_cs0.hsusb2_data6 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* mcspi2_cs1.hsusb2_data3 */ + OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) + >; + }; + wl12xx_gpio: pinmux_wl12xx_gpio { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */ @@ -112,6 +151,46 @@ }; }; +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_2_pins>; + + ehci_phy_pins: pinmux_ehci_phy_pins { + pinctrl-single,pins = < + + /* EHCI PHY reset GPIO etk_d7.gpio_21 */ + OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) + + /* EHCI VBUS etk_d8.gpio_22 */ + OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) + >; + }; + + /* Used by OHCI and EHCI. OHCI won't work without external phy */ + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + + /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) + + /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) + + /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) + + /* etk_d15.hsusb2_data1 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) + >; + }; +}; + &omap3_pmx_wkup { dss_dpi_pins2: pinmux_dss_dpi_pins1 { pinctrl-single,pins = < @@ -153,6 +232,29 @@ pinctrl-0 = <&uart3_pins>; }; +/* + * GPIO_61 (nUSB2_EN_1V8) must be low to enable on-board EHCI USB2 interface + * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V. + */ +&gpio2 { + en_usb2_port { + gpio-hog; + gpios = <29 GPIO_ACTIVE_HIGH>; /* gpio_61 */ + output-low; + line-name = "enable usb2 port"; + }; +}; + +/* T2_GPIO_2 low to route GPIO_61 to on-board devices */ +&twl_gpio { + en_on_board_gpio_61 { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "en_hsusb2_clk"; + }; +}; + &gpmc { ranges = <0 0 0x30000000 0x1000000>, /* CS0: 16MB for NAND */ <5 0 0x2c000000 0x01000000>; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index 090475083c2f..2b1d6977a535 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -12,6 +12,24 @@ }; }; + /* HS USB Port 2 Power */ + hsusb2_power: hsusb2_power_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb2_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; /* gpio_22 */ + startup-delay-us = <70000>; + enable-active-high; + }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */ + vcc-supply = <&hsusb2_power>; + }; + leds { compatible = "gpio-leds"; ledb { @@ -76,7 +94,6 @@ &lcd_3v3 { gpio = <&gpio5 25 GPIO_ACTIVE_LOW>; /* gpio153 */ - enable-active-low; }; &lcd0 { @@ -143,6 +160,14 @@ >; }; +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; + &usb_otg_hs { interface-type = <0>; usb-phy = <&usb2_phy>; @@ -159,3 +184,10 @@ reg = <5 0 0xff>; }; }; + +&vaux2 { + regulator-name = "usb_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 9ec737069369..4504908c23fe 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -419,7 +419,7 @@ /* RFID EEPROM */ m24lr64@50 { - compatible = "at,24c64"; + compatible = "atmel,24c64"; reg = <0x50>; }; }; diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index 401fae838fe9..cd220342a805 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -74,16 +74,6 @@ gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* gpio_16: WiFi nReset */ startup-delay-us = <10000>; }; - - /* Regulator to trigger the nReset signal of the Bluetooth module */ - w3cbw003c_bt_nreset: regulator-w3cbw003c-bt-nreset { - compatible = "regulator-fixed"; - regulator-name = "regulator-w3cbw003c-bt-nreset"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio_164: BT nReset */ - startup-delay-us = <10000>; - }; }; &omap3_pmx_core { @@ -191,7 +181,6 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; vmmc-supply = <&w3cbw003c_npoweron>; - vqmmc-supply = <&w3cbw003c_bt_nreset>; vmmc_aux-supply = <&w3cbw003c_wifi_nreset>; bus-width = <4>; cap-sdio-irq; diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi index 73643fabde5d..4476fb685a1b 100644 --- a/arch/arm/boot/dts/omap3-sb-t35.dtsi +++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi @@ -50,7 +50,6 @@ pinctrl-names = "default"; pinctrl-0 = <&sb_t35_audio_amp>; gpio = <&gpio2 29 GPIO_ACTIVE_LOW>; /* gpio_61 */ - enable-active-low; regulator-always-on; }; }; @@ -90,7 +89,7 @@ clock-frequency = <400000>; at24@50 { - compatible = "at24,24c02"; + compatible = "atmel,24c02"; pagesize = <16>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index dc80886b5329..06ac0f80bcf0 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -63,7 +63,6 @@ regulator-min-microvolt = <3150000>; regulator-max-microvolt = <3150000>; gpio = <&gpio5 29 GPIO_ACTIVE_LOW>; /* gpio_157 */ - enable-active-low; startup-delay-us = <10000>; }; }; diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index 89eb607f4a9e..10ca1c174995 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -301,7 +301,7 @@ #address-cells = <1>; #size-cells = <0>; wlcore: wlcore@2 { - compatible = "ti,wl1283"; + compatible = "ti,wl1285", "ti,wl1283"; reg = <2>; interrupt-parent = <&gpio4>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; /* gpio100 */ @@ -348,6 +348,17 @@ interrupt-names = "irq", "wakeup"; wakeup-source; }; + + isl29030@44 { + compatible = "isil,isl29030"; + reg = <0x44>; + + pinctrl-names = "default"; + pinctrl-0 = <&als_proximity_pins>; + + interrupt-parent = <&gpio6>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */ + }; }; &omap4_pmx_core { @@ -395,6 +406,12 @@ >; }; + als_proximity_pins: pinmux_als_proximity_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + usb_ulpi_pins: pinmux_usb_ulpi_pins { pinctrl-single,pins = < OMAP4_IOPAD(0x196, MUX_MODE7) @@ -453,6 +470,15 @@ OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) >; }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx */ + OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx */ + OMAP4_IOPAD(0x110, PIN_INPUT_PULLUP | MUX_MODE5) /* uart4_cts */ + OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5) /* uart4_rts */ + >; + }; }; &omap4_pmx_wkup { @@ -469,6 +495,17 @@ &omap4_pmx_core 0x17c>; }; +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + + bluetooth { + compatible = "ti,wl1285-st"; + enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* gpio 174 */ + max-speed = <3686400>; + }; +}; + &usbhsehci { phys = <&hsusb1_phy>; }; diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi index ec0bd9779e1a..6e6810c258eb 100644 --- a/arch/arm/boot/dts/omap4-duovero.dtsi +++ b/arch/arm/boot/dts/omap4-duovero.dtsi @@ -12,6 +12,10 @@ model = "Gumstix Duovero"; compatible = "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4"; + chosen { + stdout-path = &uart3; + }; + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi index 758b6eb7ae43..6500bfc8d130 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi @@ -241,7 +241,7 @@ }; eeprom@50 { - compatible = "microchip,24c32"; + compatible = "microchip,24c32", "atmel,24c32"; reg = <0x50>; }; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 578c53f08309..64d00f5893a6 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -900,15 +900,24 @@ ctrl-module = <&omap_control_usbotg>; }; - aes: aes@4b501000 { + aes1: aes@4b501000 { compatible = "ti,omap4-aes"; - ti,hwmods = "aes"; + ti,hwmods = "aes1"; reg = <0x4b501000 0xa0>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; dmas = <&sdma 111>, <&sdma 110>; dma-names = "tx", "rx"; }; + aes2: aes@4b701000 { + compatible = "ti,omap4-aes"; + ti,hwmods = "aes2"; + reg = <0x4b701000 0xa0>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 114>, <&sdma 113>; + dma-names = "tx", "rx"; + }; + des: des@480a5000 { compatible = "ti,omap4-des"; ti,hwmods = "des"; @@ -918,6 +927,15 @@ dma-names = "tx", "rx"; }; + sham: sham@4b100000 { + compatible = "ti,omap4-sham"; + ti,hwmods = "sham"; + reg = <0x4b100000 0x300>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 119>; + dma-names = "rx"; + }; + abb_mpu: regulator-abb-mpu { compatible = "ti,abb-v2"; regulator-name = "abb_mpu"; diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi index 9573b37fbaa7..05732ed4f50f 100644 --- a/arch/arm/boot/dts/omap44xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi @@ -357,6 +357,8 @@ compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin_ck>, <&iva_hsd_byp_clk_mux_ck>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; + assigned-clocks = <&dpll_iva_ck>; + assigned-clock-rates = <931200000>; }; dpll_iva_x2_ck: dpll_iva_x2_ck { @@ -374,6 +376,8 @@ reg = <0x01b8>; ti,index-starts-at-one; ti,invert-autoidle-bit; + assigned-clocks = <&dpll_iva_m4x2_ck>; + assigned-clock-rates = <465600000>; }; dpll_iva_m5x2_ck: dpll_iva_m5x2_ck@1bc { @@ -385,6 +389,8 @@ reg = <0x01bc>; ti,index-starts-at-one; ti,invert-autoidle-bit; + assigned-clocks = <&dpll_iva_m5x2_ck>; + assigned-clock-rates = <266100000>; }; dpll_mpu_ck: dpll_mpu_ck@160 { @@ -969,22 +975,6 @@ ti,max-div = <2>; }; - aes1_fck: aes1_fck@15a0 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l3_div_ck>; - ti,bit-shift = <1>; - reg = <0x15a0>; - }; - - aes2_fck: aes2_fck@15a8 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l3_div_ck>; - ti,bit-shift = <1>; - reg = <0x15a8>; - }; - dss_sys_clk: dss_sys_clk@1120 { #clock-cells = <0>; compatible = "ti,gate-clock"; diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index b153f604932a..78397f66d0b2 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -404,7 +404,7 @@ clock-frequency = <400000>; at24@50 { - compatible = "at24,24c02"; + compatible = "atmel,24c02"; pagesize = <16>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/omap5-sbc-t54.dts b/arch/arm/boot/dts/omap5-sbc-t54.dts index 337bbbc01a35..7b8810d13257 100644 --- a/arch/arm/boot/dts/omap5-sbc-t54.dts +++ b/arch/arm/boot/dts/omap5-sbc-t54.dts @@ -44,7 +44,7 @@ clock-frequency = <400000>; at24@50 { - compatible = "at24,24c02"; + compatible = "atmel,24c02"; pagesize = <16>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 0d42c46f13e7..ec2c8baef62a 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -137,6 +137,13 @@ }; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + + cd-gpios = <&gpio5 24 GPIO_ACTIVE_LOW>; /* gpio5_152 */ +}; + &omap5_pmx_core { evm_keys_pins: pinmux_evm_keys_gpio_pins { pinctrl-single,pins = < @@ -150,6 +157,12 @@ OMAP5_IOPAD(0x1c8, PIN_INPUT | MUX_MODE0) /* i2c5_sda */ >; }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x1d4, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio5_152 */ + >; + }; }; &tpd12s015 { diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index 4899c2359d0a..529193442620 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -315,6 +315,8 @@ compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; + assigned-clocks = <&dpll_iva_ck>; + assigned-clock-rates = <1165000000>; }; dpll_iva_x2_ck: dpll_iva_x2_ck { @@ -330,6 +332,8 @@ ti,max-div = <63>; reg = <0x01b8>; ti,index-starts-at-one; + assigned-clocks = <&dpll_iva_h11x2_ck>; + assigned-clock-rates = <465920000>; }; dpll_iva_h12x2_ck: dpll_iva_h12x2_ck@1bc { @@ -339,6 +343,8 @@ ti,max-div = <63>; reg = <0x01bc>; ti,index-starts-at-one; + assigned-clocks = <&dpll_iva_h12x2_ck>; + assigned-clock-rates = <388300000>; }; mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div { diff --git a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts new file mode 100644 index 000000000000..521463d4cac6 --- /dev/null +++ b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts @@ -0,0 +1,26 @@ +/* + * Copyright (c) 2016-2017 Andreas Färber + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/dts-v1/; + +#include "owl-s500-guitar.dtsi" + +/ { + compatible = "lemaker,guitar-bb-rev-b", "lemaker,guitar", "actions,s500"; + model = "LeMaker Guitar Base Board rev. B"; + + aliases { + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial3:115200n8"; + }; +}; + +&uart3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/owl-s500-guitar.dtsi b/arch/arm/boot/dts/owl-s500-guitar.dtsi new file mode 100644 index 000000000000..079b2c02cc13 --- /dev/null +++ b/arch/arm/boot/dts/owl-s500-guitar.dtsi @@ -0,0 +1,22 @@ +/* + * LeMaker Guitar SoM + * + * Copyright (c) 2016-2017 Andreas Färber + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +#include "owl-s500.dtsi" + +/ { + compatible = "lemaker,guitar", "actions,s500"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; +}; + +&timer { + clocks = <&hosc>; +}; diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi new file mode 100644 index 000000000000..51a48741d4c0 --- /dev/null +++ b/arch/arm/boot/dts/owl-s500.dtsi @@ -0,0 +1,186 @@ +/* + * Actions Semi S500 SoC + * + * Copyright (c) 2016-2017 Andreas Färber + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "actions,s500"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + }; + + chosen { + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x0>; + enable-method = "actions,s500-smp"; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x1>; + enable-method = "actions,s500-smp"; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x2>; + enable-method = "actions,s500-smp"; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x3>; + enable-method = "actions,s500-smp"; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + hosc: hosc { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + scu: scu@b0020000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xb0020000 0x100>; + }; + + global_timer: timer@b0020200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0xb0020200 0x100>; + interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; + status = "disabled"; + }; + + twd_timer: timer@b0020600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xb0020600 0x20>; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; + status = "disabled"; + }; + + twd_wdt: wdt@b0020620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0xb0020620 0xe0>; + interrupts = <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; + status = "disabled"; + }; + + gic: interrupt-controller@b0021000 { + compatible = "arm,cortex-a9-gic"; + reg = <0xb0021000 0x1000>, + <0xb0020100 0x0100>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + l2: cache-controller@b0022000 { + compatible = "arm,pl310-cache"; + reg = <0xb0022000 0x1000>; + cache-unified; + cache-level = <2>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + arm,tag-latency = <3 3 2>; + arm,data-latency = <5 3 3>; + }; + + uart0: serial@b0120000 { + compatible = "actions,s500-uart", "actions,owl-uart"; + reg = <0xb0120000 0x2000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart1: serial@b0122000 { + compatible = "actions,s500-uart", "actions,owl-uart"; + reg = <0xb0122000 0x2000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart2: serial@b0124000 { + compatible = "actions,s500-uart", "actions,owl-uart"; + reg = <0xb0124000 0x2000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart3: serial@b0126000 { + compatible = "actions,s500-uart", "actions,owl-uart"; + reg = <0xb0126000 0x2000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart4: serial@b0128000 { + compatible = "actions,s500-uart", "actions,owl-uart"; + reg = <0xb0128000 0x2000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart5: serial@b012a000 { + compatible = "actions,s500-uart", "actions,owl-uart"; + reg = <0xb012a000 0x2000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart6: serial@b012c000 { + compatible = "actions,s500-uart", "actions,owl-uart"; + reg = <0xb012c000 0x2000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + timer: timer@b0168000 { + compatible = "actions,s500-timer"; + reg = <0xb0168000 0x8000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "2hz0", "2hz1", "timer0", "timer1"; + }; + + sps: power-controller@b01b0100 { + compatible = "actions,s500-sps"; + reg = <0xb01b0100 0x100>; + #power-domain-cells = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts index 0abd7bf17568..3139221737ee 100644 --- a/arch/arm/boot/dts/pm9g45.dts +++ b/arch/arm/boot/dts/pm9g45.dts @@ -37,12 +37,10 @@ }; pinctrl@fffff200 { - - board { - pinctrl_board_nand: nand0-board { + nand { + pinctrl_nand_rb: nand-rb-0 { atmel,pins = - <AT91_PIOD 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD3 gpio RDY pin pull_up*/ - AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PC14 gpio enable pin pull_up */ + <AT91_PIOD 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; }; }; @@ -71,50 +69,61 @@ phy-mode = "rmii"; status = "okay"; }; - }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; - pinctrl-0 = <&pinctrl_board_nand>; - - gpios = <&pioD 3 GPIO_ACTIVE_HIGH - &pioC 14 GPIO_ACTIVE_HIGH - 0 - >; - + ebi: ebi@10000000 { status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x20000>; - }; - - barebox@20000 { - label = "barebox"; - reg = <0x20000 0x40000>; - }; - - bareboxenv@60000 { - label = "bareboxenv"; - reg = <0x60000 0x1A0000>; - }; - - kernel@200000 { - label = "bareboxenv2"; - reg = <0x200000 0x300000>; - }; - - kernel@500000 { - label = "root"; - reg = <0x500000 0x400000>; - }; - - data@900000 { - label = "data"; - reg = <0x900000 0x8340000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioD 3 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x1A0000>; + }; + + kernel@200000 { + label = "bareboxenv2"; + reg = <0x200000 0x300000>; + }; + + kernel@500000 { + label = "root"; + reg = <0x500000 0x400000>; + }; + + data@900000 { + label = "data"; + reg = <0x900000 0x8340000>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi index f9f4726396a0..95d59be97213 100644 --- a/arch/arm/boot/dts/pxa25x.dtsi +++ b/arch/arm/boot/dts/pxa25x.dtsi @@ -93,22 +93,22 @@ pxa250_opp_table: opp_table0 { compatible = "operating-points-v2"; - opp@99532800 { + opp-99532800 { opp-hz = /bits/ 64 <99532800>; opp-microvolt = <1000000 950000 1650000>; clock-latency-ns = <20>; }; - opp@199065600 { + opp-199065600 { opp-hz = /bits/ 64 <199065600>; opp-microvolt = <1000000 950000 1650000>; clock-latency-ns = <20>; }; - opp@298598400 { + opp-298598400 { opp-hz = /bits/ 64 <298598400>; opp-microvolt = <1100000 1045000 1650000>; clock-latency-ns = <20>; }; - opp@398131200 { + opp-398131200 { opp-hz = /bits/ 64 <398131200>; opp-microvolt = <1300000 1235000 1650000>; clock-latency-ns = <20>; diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi index e0fab48ba6fa..5f1d6da02a4c 100644 --- a/arch/arm/boot/dts/pxa27x.dtsi +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -141,37 +141,37 @@ pxa270_opp_table: opp_table0 { compatible = "operating-points-v2"; - opp@104000000 { + opp-104000000 { opp-hz = /bits/ 64 <104000000>; opp-microvolt = <900000 900000 1705000>; clock-latency-ns = <20>; }; - opp@156000000 { + opp-156000000 { opp-hz = /bits/ 64 <156000000>; opp-microvolt = <1000000 1000000 1705000>; clock-latency-ns = <20>; }; - opp@208000000 { + opp-208000000 { opp-hz = /bits/ 64 <208000000>; opp-microvolt = <1180000 1180000 1705000>; clock-latency-ns = <20>; }; - opp@312000000 { + opp-312000000 { opp-hz = /bits/ 64 <312000000>; opp-microvolt = <1250000 1250000 1705000>; clock-latency-ns = <20>; }; - opp@416000000 { + opp-416000000 { opp-hz = /bits/ 64 <416000000>; opp-microvolt = <1350000 1350000 1705000>; clock-latency-ns = <20>; }; - opp@520000000 { + opp-520000000 { opp-hz = /bits/ 64 <520000000>; opp-microvolt = <1450000 1450000 1705000>; clock-latency-ns = <20>; }; - opp@624000000 { + opp-624000000 { opp-hz = /bits/ 64 <624000000>; opp-microvolt = <1550000 1550000 1705000>; clock-latency-ns = <20>; diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index 2da1413f5720..9d725f983282 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -23,6 +23,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> #include "qcom-msm8660.dtsi" / { @@ -83,6 +84,25 @@ }; }; + /* + * Capella CM3605 light and proximity sensor mounted directly + * on the sensor board. + */ + cm3605 { + compatible = "capella,cm3605"; + vdd-supply = <&pm8058_l14>; // 2.85V + aset-gpios = <&pm8058_gpio 35 GPIO_ACTIVE_LOW>; + capella,aset-resistance-ohms = <100000>; + /* GPIO34 has interrupt 225 on the PM8058 */ + /* Trig on both edges - getting close or far away */ + interrupts-extended = <&pm8058 225 IRQ_TYPE_EDGE_BOTH>; + /* MPP05 analog input to the XOADC */ + io-channels = <&xoadc 0x00 0x05>; + io-channel-names = "aout"; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>; + }; + soc { pinctrl@800000 { /* eMMMC pins, all 8 data lines connected */ @@ -160,6 +180,19 @@ }; }; + dragon_gsbi8_i2c_pins: gsbi8_i2c { + mux { + pins = "gpio64", "gpio65"; + function = "gsbi8"; + }; + pinconf { + pins = "gpio64", "gpio65"; + drive-strength = <16>; + /* These have external pull-up 2.2kOhm to 1.8V */ + bias-disable; + }; + }; + dragon_gsbi12_i2c_pins: gsbi12_i2c { mux { pins = "gpio115", "gpio116"; @@ -317,6 +350,24 @@ power-source = <PM8058_GPIO_S3>; }; }; + dragon_cm3605_gpios: cm3605-gpios { + /* Pin 34 connected to the proxy IRQ */ + pinconf_gpio34 { + pins = "gpio34"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + /* Pin 35 connected to ASET */ + pinconf_gpio35 { + pins = "gpio35"; + function = "normal"; + output-high; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + }; dragon_veth_gpios: veth-gpios { pinconf { pins = "gpio40"; @@ -327,6 +378,47 @@ }; }; + mpps@50 { + dragon_cm3605_mpps: cm3605-mpps { + pinconf { + pins = "mpp5"; + function = "analog"; + input-enable; + bias-high-impedance; + /* Let's use channel 5 */ + qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>; + power-source = <PM8058_GPIO_S3>; + }; + }; + }; + + xoadc@197 { + /* Reference voltage 2.2 V */ + xoadc-ref-supply = <&pm8058_l18>; + + /* Board-specific channels */ + mpp5@05 { + /* Connected to AOUT of ALS sensor */ + reg = <0x00 0x05>; + }; + mpp6@06 { + /* Connected to test point TP43 */ + reg = <0x00 0x06>; + }; + mpp7@07 { + /* Connected to battery thermistor */ + reg = <0x00 0x07>; + }; + mpp8@08 { + /* Connected to battery ID detector */ + reg = <0x00 0x08>; + }; + mpp9@09 { + /* Connected to XO thermistor */ + reg = <0x00 0x09>; + }; + }; + led@48 { /* * The keypad LED @0x48 is routed to @@ -340,6 +432,7 @@ reg = <0x48>; label = "pm8058:infrared:proximitysensor"; default-state = "off"; + linux,default-trigger = "cm3605"; }; led@131 { compatible = "qcom,pm8058-led"; @@ -368,6 +461,42 @@ }; }; + gsbi@19800000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C>; + + i2c@19880000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_gsbi8_i2c_pins>; + + eeprom@52 { + /* A 16KiB Platform ID EEPROM on the CPU carrier board */ + compatible = "atmel,24c128"; + reg = <0x52>; + vcc-supply = <&pm8058_s3>; + pagesize = <64>; + }; + wm8903: wm8903@1a { + /* This Woolfson Micro device has an unrouted interrupt line */ + compatible = "wlf,wm8903"; + reg = <0x1a>; + + AVDD-supply = <&pm8058_l16>; + CPVDD-supply = <&pm8058_l16>; + DBVDD-supply = <&pm8058_s3>; + DCVDD-supply = <&pm8058_l0>; + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>; + }; + }; + }; + gsbi@19c00000 { status = "ok"; qcom,mode = <GSBI_PROT_I2C_UART>; diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts index 8f5de029bca9..f245064f320e 100644 --- a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts +++ b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts @@ -320,43 +320,37 @@ }; /* OTG */ - phy@12500000 { - status = "okay"; - dr_mode = "peripheral"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l4>; - }; - - phy@12520000 { - status = "okay"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - - phy@12530000 { - status = "okay"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - - gadget@12500000 { - status = "okay"; - }; - - /* OTG */ usb@12500000 { status = "okay"; + dr_mode = "peripheral"; + ulpi { + phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + }; }; usb@12520000 { status = "okay"; + dr_mode = "otg"; + ulpi { + phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + }; }; usb@12530000 { status = "okay"; + dr_mode = "otg"; + ulpi { + phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + }; }; amba { diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts index e39440a86739..3483a66e44c1 100644 --- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts +++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts @@ -321,21 +321,15 @@ }; /* OTG */ - phy@12500000 { - status = "okay"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l4>; - dr_mode = "otg"; - }; - - gadget@12500000 { - status = "okay"; - }; - - /* OTG */ usb@12500000 { status = "okay"; + dr_mode = "otg"; + ulpi { + phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + }; }; amba { diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 35f1d46edded..5b151e425530 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -150,42 +150,37 @@ }; /* OTG */ - usb1_phy: phy@12500000 { - status = "okay"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l4>; - }; - - usb3_phy: phy@12520000 { - status = "okay"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - - usb4_phy: phy@12530000 { - status = "okay"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - - gadget1: gadget@12500000 { - status = "ok"; - }; - - /* OTG */ - usb1: usb@12500000 { + usb@12500000 { status = "ok"; + dr_mode = "otg"; + ulpi { + phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + }; }; - usb3: usb@12520000 { + usb@12520000 { status = "okay"; + dr_mode = "host"; + ulpi { + phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + }; }; - usb4: usb@12530000 { + usb@12530000 { status = "okay"; + dr_mode = "host"; + ulpi { + phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + }; }; /* on board fixed 3.3v supply */ diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 881ce707311a..053b5bdd7808 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -244,42 +244,37 @@ }; /* OTG */ - usb1_phy: phy@12500000 { - status = "okay"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l4>; - }; - - usb3_phy: phy@12520000 { - status = "okay"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - - usb4_phy: phy@12530000 { - status = "okay"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - - gadget1: gadget@12500000 { - status = "okay"; - }; - - /* OTG */ - usb1: usb@12500000 { + usb@12500000 { status = "okay"; + dr_mode = "otg"; + ulpi { + phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + }; }; - usb3: usb@12520000 { + usb@12520000 { status = "okay"; + dr_mode = "host"; + ulpi { + phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + }; }; - usb4: usb@12530000 { + usb@12530000 { status = "okay"; + dr_mode = "host"; + ulpi { + phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + }; }; pci@1b500000 { diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts index a34ba3555454..88a9aff41e2f 100644 --- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts +++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts @@ -349,15 +349,15 @@ }; }; - phy@12500000 { - status = "okay"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l4>; - }; - - gadget@12500000 { + usb@12500000 { status = "okay"; + dr_mode = "otg"; + ulpi { + phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + }; }; gsbi@1a200000 { diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 14a6f5ed02de..f3db185a6809 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -197,7 +197,7 @@ clock-frequency = <27000000>; }; - sleep_clk { + sleep_clk: sleep_clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; @@ -884,81 +884,97 @@ }; }; - usb1_phy: phy@12500000 { - compatible = "qcom,usb-otg-ci"; - reg = <0x12500000 0x400>; - interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>; - status = "disabled"; - - clocks = <&gcc USB_HS1_XCVR_CLK>, - <&gcc USB_HS1_H_CLK>; - clock-names = "core", "iface"; - - resets = <&gcc USB_HS1_RESET>; - reset-names = "link"; - }; - - usb3_phy: phy@12520000 { - compatible = "qcom,usb-otg-ci"; - reg = <0x12520000 0x400>; - interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>; - status = "disabled"; - dr_mode = "host"; - - clocks = <&gcc USB_HS3_XCVR_CLK>, - <&gcc USB_HS3_H_CLK>; - clock-names = "core", "iface"; - - resets = <&gcc USB_HS3_RESET>; - reset-names = "link"; - }; - - usb4_phy: phy@12530000 { - compatible = "qcom,usb-otg-ci"; - reg = <0x12530000 0x400>; - interrupts = <GIC_SPI 215 IRQ_TYPE_NONE>; - status = "disabled"; - dr_mode = "host"; - - clocks = <&gcc USB_HS4_XCVR_CLK>, - <&gcc USB_HS4_H_CLK>; - clock-names = "core", "iface"; - - resets = <&gcc USB_HS4_RESET>; - reset-names = "link"; - }; - - gadget1: gadget@12500000 { - compatible = "qcom,ci-hdrc"; - reg = <0x12500000 0x400>; - status = "disabled"; - dr_mode = "peripheral"; - interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>; - usb-phy = <&usb1_phy>; - }; - usb1: usb@12500000 { - compatible = "qcom,ehci-host"; - reg = <0x12500000 0x400>; - interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>; - status = "disabled"; - usb-phy = <&usb1_phy>; + compatible = "qcom,ci-hdrc"; + reg = <0x12500000 0x200>, + <0x12500200 0x200>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>; + clock-names = "core", "iface"; + assigned-clocks = <&gcc USB_HS1_XCVR_CLK>; + assigned-clock-rates = <60000000>; + resets = <&gcc USB_HS1_RESET>; + reset-names = "core"; + phy_type = "ulpi"; + ahb-burst-config = <0>; + phys = <&usb_hs1_phy>; + phy-names = "usb-phy"; + status = "disabled"; + #reset-cells = <1>; + + ulpi { + usb_hs1_phy: phy { + compatible = "qcom,usb-hs-phy-apq8064", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&sleep_clk>, <&cxo_board>; + clock-names = "sleep", "ref"; + resets = <&usb1 0>; + reset-names = "por"; + }; + }; }; usb3: usb@12520000 { - compatible = "qcom,ehci-host"; - reg = <0x12520000 0x400>; - interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>; - status = "disabled"; - usb-phy = <&usb3_phy>; + compatible = "qcom,ci-hdrc"; + reg = <0x12520000 0x200>, + <0x12520200 0x200>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc USB_HS3_XCVR_CLK>, <&gcc USB_HS3_H_CLK>; + clock-names = "core", "iface"; + assigned-clocks = <&gcc USB_HS3_XCVR_CLK>; + assigned-clock-rates = <60000000>; + resets = <&gcc USB_HS3_RESET>; + reset-names = "core"; + phy_type = "ulpi"; + ahb-burst-config = <0>; + phys = <&usb_hs3_phy>; + phy-names = "usb-phy"; + status = "disabled"; + #reset-cells = <1>; + + ulpi { + usb_hs3_phy: phy { + compatible = "qcom,usb-hs-phy-apq8064", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&sleep_clk>, <&cxo_board>; + clock-names = "sleep", "ref"; + resets = <&usb3 0>; + reset-names = "por"; + }; + }; }; usb4: usb@12530000 { - compatible = "qcom,ehci-host"; - reg = <0x12530000 0x400>; - interrupts = <GIC_SPI 215 IRQ_TYPE_NONE>; - status = "disabled"; - usb-phy = <&usb4_phy>; + compatible = "qcom,ci-hdrc"; + reg = <0x12530000 0x200>, + <0x12530200 0x200>; + interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc USB_HS4_XCVR_CLK>, <&gcc USB_HS4_H_CLK>; + clock-names = "core", "iface"; + assigned-clocks = <&gcc USB_HS4_XCVR_CLK>; + assigned-clock-rates = <60000000>; + resets = <&gcc USB_HS4_RESET>; + reset-names = "core"; + phy_type = "ulpi"; + ahb-burst-config = <0>; + phys = <&usb_hs4_phy>; + phy-names = "usb-phy"; + status = "disabled"; + #reset-cells = <1>; + + ulpi { + usb_hs4_phy: phy { + compatible = "qcom,usb-hs-phy-apq8064", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&sleep_clk>, <&cxo_board>; + clock-names = "sleep", "ref"; + resets = <&usb4 0>; + reset-names = "por"; + }; + }; }; sata_phy0: phy@1b400000 { diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index ad51df27dfb7..32f3b81f609c 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -44,6 +44,26 @@ vqmmc-supply = <&pm8941_l13>; }; + usb@f9a55000 { + status = "ok"; + phys = <&usb_hs2_phy>; + phy-select = <&tcsr 0xb000 1>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + hnp-disable; + srp-disable; + adp-disable; + ulpi { + phy@b { + status = "ok"; + v3p3-supply = <&pm8941_l24>; + v1p8-supply = <&pm8941_l6>; + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x63>; + }; + }; + }; + pinctrl@fd510000 { i2c11_pins: i2c11 { diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index b7a24af8f47b..4b7d97275c62 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -154,10 +154,10 @@ i2c_0: i2c@78b7000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x78b7000 0x6000>; + reg = <0x78b7000 0x600>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; clock-names = "iface", "core"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 76f4e8921d58..f1fbffe59b93 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -284,6 +284,29 @@ }; }; + gsbi7: gsbi@16600000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <7>; + reg = <0x16600000 0x100>; + clocks = <&gcc GSBI7_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + syscon-tcsr = <&tcsr>; + + gsbi7_serial: serial@16640000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16640000 0x1000>, + <0x16600000 0x1000>; + interrupts = <0 158 0x0>; + clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + sata_phy: sata-phy@1b400000 { compatible = "qcom,ipq806x-sata-phy"; reg = <0x1b400000 0x200>; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 747669a62aa8..1b5d31b33b5e 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -63,6 +63,22 @@ }; }; + /* + * These channels from the ADC are simply hardware monitors. + * That is why the ADC is referred to as "HKADC" - HouseKeeping + * ADC. + */ + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&xoadc 0x00 0x01>, /* Battery */ + <&xoadc 0x00 0x02>, /* DC in (charger) */ + <&xoadc 0x00 0x04>, /* VPH the main system voltage */ + <&xoadc 0x00 0x0b>, /* Die temperature */ + <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ + <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ + <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */ + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -107,6 +123,31 @@ reg = <0x900000 0x4000>; }; + + gsbi8: gsbi@19800000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <12>; + reg = <0x19800000 0x100>; + clocks = <&gcc GSBI8_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + gsbi8_i2c: i2c@19880000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x19880000 0x1000>; + interrupts = <GIC_SPI 161 IRQ_TYPE_NONE>; + clocks = <&gcc GSBI8_QUP_CLK>, <&gcc GSBI8_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + gsbi12: gsbi@19c00000 { compatible = "qcom,gsbi-v1.0.0"; cell-index = <12>; @@ -267,6 +308,49 @@ row-hold = <91500>; }; + xoadc: xoadc@197 { + compatible = "qcom,pm8058-adc"; + reg = <0x197>; + interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>; + #address-cells = <2>; + #size-cells = <0>; + #io-channel-cells = <2>; + + vcoin: adc-channel@00 { + reg = <0x00 0x00>; + }; + vbat: adc-channel@01 { + reg = <0x00 0x01>; + }; + dcin: adc-channel@02 { + reg = <0x00 0x02>; + }; + ichg: adc-channel@03 { + reg = <0x00 0x03>; + }; + vph_pwr: adc-channel@04 { + reg = <0x00 0x04>; + }; + usb_vbus: adc-channel@0a { + reg = <0x00 0x0a>; + }; + die_temp: adc-channel@0b { + reg = <0x00 0x0b>; + }; + ref_625mv: adc-channel@0c { + reg = <0x00 0x0c>; + }; + ref_1250mv: adc-channel@0d { + reg = <0x00 0x0d>; + }; + ref_325mv: adc-channel@0e { + reg = <0x00 0x0e>; + }; + ref_muxoff: adc-channel@0f { + reg = <0x00 0x0f>; + }; + }; + rtc@1e8 { compatible = "qcom,pm8058-rtc"; reg = <0x1e8>; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index e7c1577d56f4..50966378f9e4 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -92,7 +92,6 @@ vdd_l9_l10_l17_l22-supply = <&vreg_boost>; vdd_l13_l20_l23_l24-supply = <&vreg_boost>; vdd_l21-supply = <&vreg_boost>; - vin_5vs-supply = <&pm8941_5v>; s1 { regulator-min-microvolt = <1300000>; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 307bf6a647b3..c5ee68a3f7f5 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> #include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/reset/qcom,gcc-msm8974.h> #include <dt-bindings/gpio/gpio.h> #include "skeleton.dtsi" @@ -551,6 +552,11 @@ reg = <0xfc400000 0x4000>; }; + tcsr: syscon@fd4a0000 { + compatible = "syscon"; + reg = <0xfd4a0000 0x10000>; + }; + tcsr_mutex_block: syscon@fd484000 { compatible = "syscon"; reg = <0xfd484000 0x2000>; @@ -620,6 +626,50 @@ status = "disabled"; }; + otg: usb@f9a55000 { + compatible = "qcom,ci-hdrc"; + reg = <0xf9a55000 0x200>, + <0xf9a55200 0x200>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", "core"; + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; + assigned-clock-rates = <75000000>; + resets = <&gcc GCC_USB_HS_BCR>; + reset-names = "core"; + phy_type = "ulpi"; + dr_mode = "otg"; + ahb-burst-config = <0>; + phy-names = "usb-phy"; + status = "disabled"; + #reset-cells = <1>; + + ulpi { + usb_hs1_phy: phy@a { + compatible = "qcom,usb-hs-phy-msm8974", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>; + reset-names = "phy", "por"; + status = "disabled"; + }; + + usb_hs2_phy: phy@b { + compatible = "qcom,usb-hs-phy-msm8974", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2B_PHY_BCR>, <&otg 1>; + reset-names = "phy", "por"; + status = "disabled"; + }; + }; + }; + rng@f9bff000 { compatible = "qcom,prng"; reg = <0xf9bff000 0x200>; @@ -1021,7 +1071,6 @@ pm8941_s1: s1 {}; pm8941_s2: s2 {}; pm8941_s3: s3 {}; - pm8941_5v: s4 {}; pm8941_l1: l1 {}; pm8941_l2: l2 {}; @@ -1051,9 +1100,6 @@ pm8941_lvs1: lvs1 {}; pm8941_lvs2: lvs2 {}; pm8941_lvs3: lvs3 {}; - - pm8941_5vs1: 5vs1 {}; - pm8941_5vs2: 5vs2 {}; }; }; }; diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index f8eb5e31c920..3fc9f34f45bb 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -26,7 +26,14 @@ bias-pull-up; }; - charger@1000 { + usb_id: misc@900 { + compatible = "qcom,pm8941-misc"; + reg = <0x900>; + interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "usb_id"; + }; + + smbb: charger@1000 { compatible = "qcom,pm8941-charger"; reg = <0x1000>; interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>, @@ -45,6 +52,10 @@ "chg-gone", "usb-valid", "dc-valid"; + + usb-otg-in-supply = <&pm8941_5vs1>; + + chg_otg: otg-vbus { }; }; pm8941_gpios: gpios@c000 { @@ -171,5 +182,28 @@ status = "disabled"; }; + + regulators { + compatible = "qcom,pm8941-regulators"; + interrupts = <0x1 0x83 0x2 0>, <0x1 0x84 0x2 0>; + interrupt-names = "ocp-5vs1", "ocp-5vs2"; + vin_5vs-supply = <&pm8941_5v>; + + pm8941_5v: s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-enable-ramp-delay = <500>; + }; + + pm8941_5vs1: 5vs1 { + regulator-enable-ramp-delay = <1000>; + regulator-pull-down; + regulator-over-current-protection; + qcom,ocp-max-retries = <10>; + qcom,ocp-retry-delay = <30>; + qcom,vs-soft-start-strength = <0>; + regulator-initial-mode = <1>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts new file mode 100644 index 000000000000..a1b2aef984f6 --- /dev/null +++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts @@ -0,0 +1,66 @@ +/* + * Device Tree Source for the GR-Peach board + * + * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org> + * Copyright (C) 2016 Renesas Electronics + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r7s72100.dtsi" + +/ { + model = "GR-Peach"; + compatible = "renesas,gr-peach", "renesas,r7s72100"; + + aliases { + serial0 = &scif2; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/mtdblock0"; + stdout-path = "serial0:115200n8"; + }; + + memory@20000000 { + device_type = "memory"; + reg = <0x20000000 0x00a00000>; + + }; + + lbsc { + #address-cells = <1>; + #size-cells = <1>; + }; + + flash@18000000 { + compatible = "mtd-rom"; + probe-type = "map_rom"; + reg = <0x18000000 0x00800000>; + bank-width = <4>; + device-width = <1>; + + #address-cells = <1>; + #size-cells = <1>; + + rootfs@600000 { + label = "rootfs"; + reg = <0x00600000 0x00200000>; + }; + }; +}; + +&extal_clk { + clock-frequency = <13333000>; +}; + +&usb_x1_clk { + clock-frequency = <48000000>; +}; + +&scif2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index 0423996e4dcc..5cf53e9943af 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -144,9 +144,9 @@ #clock-cells = <1>; compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0xfcfe0430 4>; - clocks = <&b_clk>; - clock-indices = <R7S72100_CLK_ETHER>; - clock-output-names = "ether"; + clocks = <&b_clk>, <&p1_clk>, <&p1_clk>; + clock-indices = <R7S72100_CLK_ETHER R7S72100_CLK_USB0 R7S72100_CLK_USB1>; + clock-output-names = "ether", "usb0", "usb1"; }; mstp8_clks: mstp8_clks@fcfe0434 { diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 1f5c9f6dddba..310222634570 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -219,7 +219,7 @@ power-domains = <&pd_c4>; }; - pfc: pfc@e6050000 { + pfc: pin-controller@e6050000 { compatible = "renesas,pfc-r8a73a4"; reg = <0 0xe6050000 0 0x9000>; gpio-controller; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 7885075428bb..1788e186a512 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -266,7 +266,9 @@ lcd0_pins: lcd0 { groups = "lcd0_data24_0", "lcd0_lclk_1", "lcd0_sync"; function = "lcd0"; + }; + lcd0_mux { /* DBGMD/LCDC0/FSIA MUX */ gpio-hog; gpios = <176 0>; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 34159a8349de..d37d22682a63 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -299,7 +299,7 @@ status = "disabled"; }; - pfc: pfc@e6050000 { + pfc: pin-controller@e6050000 { compatible = "renesas,pfc-r8a7740"; reg = <0xe6050000 0x8000>, <0xe605800c 0x20>; diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts new file mode 100644 index 000000000000..9b54783cc2a5 --- /dev/null +++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts @@ -0,0 +1,25 @@ +/* + * Device Tree Source for the iWave-RZG1M Qseven carrier board + * + * Copyright (C) 2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7743-iwg20m.dtsi" + +/ { + model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1M"; + compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"; + + aliases { + serial0 = &scif0; + }; +}; + +&scif0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi new file mode 100644 index 000000000000..001ca9144f4b --- /dev/null +++ b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi @@ -0,0 +1,29 @@ +/* + * Device Tree Source for the iWave-RZG1M-20M Qseven SOM + * + * Copyright (C) 2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include "r8a7743.dtsi" + +/ { + compatible = "iwave,g20m", "renesas,r8a7743"; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x20000000>; + }; + + memory@200000000 { + device_type = "memory"; + reg = <2 0x00000000 0 0x20000000>; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 1e93c94a9eac..8f3156c0e575 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -142,7 +142,7 @@ interrupt-controller; }; - pfc: pfc@fffc0000 { + pfc: pin-controller@fffc0000 { compatible = "renesas,pfc-r8a7778"; reg = <0xfffc0000 0x118>; }; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index ae2d9a9c65af..8ee0b2ca5d39 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -286,7 +286,7 @@ status = "disabled"; }; - pfc: pfc@fffc0000 { + pfc: pin-controller@fffc0000 { compatible = "renesas,pfc-r8a7779"; reg = <0xfffc0000 0x23c>; }; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 99269aaca6fc..2805a8608d4b 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -614,7 +614,7 @@ max-frequency = <97500000>; }; - pfc: pfc@e6060000 { + pfc: pin-controller@e6060000 { compatible = "renesas,pfc-r8a7790"; reg = <0 0xe6060000 0 0x250>; }; @@ -1602,16 +1602,14 @@ 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - usb@0,1 { + usb@1,0 { reg = <0x800 0 0 0 0>; - device_type = "pci"; phys = <&usb0 0>; phy-names = "usb"; }; - usb@0,2 { + usb@2,0 { reg = <0x1000 0 0 0 0>; - device_type = "pci"; phys = <&usb0 0>; phy-names = "usb"; }; @@ -1658,16 +1656,14 @@ 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - usb@0,1 { - reg = <0x800 0 0 0 0>; - device_type = "pci"; + usb@1,0 { + reg = <0x20800 0 0 0 0>; phys = <&usb2 0>; phy-names = "usb"; }; - usb@0,2 { - reg = <0x1000 0 0 0 0>; - device_type = "pci"; + usb@2,0 { + reg = <0x21000 0 0 0 0>; phys = <&usb2 0>; phy-names = "usb"; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 4d0c2ce59900..bd93f699ad84 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -562,7 +562,7 @@ status = "disabled"; }; - pfc: pfc@e6060000 { + pfc: pin-controller@e6060000 { compatible = "renesas,pfc-r8a7791"; reg = <0 0xe6060000 0 0x250>; }; @@ -776,6 +776,15 @@ status = "disabled"; }; + adc: adc@e6e54000 { + compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc"; + reg = <0 0xe6e54000 0 64>; + clocks = <&mstp9_clks R8A7791_CLK_GYROADC>; + clock-names = "fck"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + status = "disabled"; + }; + scif2: serial@e6e58000 { compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", "renesas,scif"; @@ -1425,13 +1434,15 @@ mstp9_clks: mstp9_clks@e6150994 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; - clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, + clocks = <&p_clk>, + <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, <&hp_clk>, <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; clock-indices = < + R8A7791_CLK_GYROADC R8A7791_CLK_GPIO7 R8A7791_CLK_GPIO6 R8A7791_CLK_GPIO5 R8A7791_CLK_GPIO4 R8A7791_CLK_GPIO3 R8A7791_CLK_GPIO2 R8A7791_CLK_GPIO1 R8A7791_CLK_GPIO0 R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD R8A7791_CLK_I2C5 @@ -1439,6 +1450,7 @@ R8A7791_CLK_I2C1 R8A7791_CLK_I2C0 >; clock-output-names = + "gyroadc", "gpio7", "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0", "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0"; @@ -1601,16 +1613,14 @@ 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - usb@0,1 { + usb@1,0 { reg = <0x800 0 0 0 0>; - device_type = "pci"; phys = <&usb0 0>; phy-names = "usb"; }; - usb@0,2 { + usb@2,0 { reg = <0x1000 0 0 0 0>; - device_type = "pci"; phys = <&usb0 0>; phy-names = "usb"; }; @@ -1636,16 +1646,14 @@ 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - usb@0,1 { - reg = <0x800 0 0 0 0>; - device_type = "pci"; + usb@1,0 { + reg = <0x10800 0 0 0 0>; phys = <&usb2 0>; phy-names = "usb"; }; - usb@0,2 { - reg = <0x1000 0 0 0 0>; - device_type = "pci"; + usb@2,0 { + reg = <0x11000 0 0 0 0>; phys = <&usb2 0>; phy-names = "usb"; }; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 806c93f6ae8b..76e3aca2029e 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -253,17 +253,38 @@ }; }; + hdmi-in { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&adv7612_in>; + }; + }; + }; + hdmi-out { compatible = "hdmi-connector"; type = "a"; port { - hdmi_con: endpoint { + hdmi_con_out: endpoint { remote-endpoint = <&adv7511_out>; }; }; }; + composite-in { + compatible = "composite-video-connector"; + + port { + composite_con_in: endpoint { + remote-endpoint = <&adv7180_in>; + }; + }; + }; + x2_clk: x2-clock { compatible = "fixed-clock"; #clock-cells = <0>; @@ -348,16 +369,37 @@ sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; }; sdhi1_pins: sd1 { groups = "sdhi1_data4", "sdhi1_ctrl"; function = "sdhi1"; + power-source = <3300>; + }; + + sdhi1_pins_uhs: sd1_uhs { + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; + power-source = <1800>; }; sdhi2_pins: sd2 { groups = "sdhi2_data4", "sdhi2_ctrl"; function = "sdhi2"; + power-source = <3300>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; }; qspi_pins: qspi { @@ -374,6 +416,16 @@ groups = "audio_clk_a"; function = "audio_clk"; }; + + vin0_pins: vin0 { + groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk"; + function = "vin0"; + }; + + vin1_pins: vin1 { + groups = "vin1_data8", "vin1_clk"; + function = "vin1"; + }; }; ðer { @@ -416,33 +468,40 @@ &sdhi0 { pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi0>; vqmmc-supply = <&vccq_sdhi0>; cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; &sdhi1 { pinctrl-0 = <&sdhi1_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi1_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi1>; vqmmc-supply = <&vccq_sdhi1>; cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; + sd-uhs-sdr50; status = "okay"; }; &sdhi2 { pinctrl-0 = <&sdhi2_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi2>; vqmmc-supply = <&vccq_sdhi2>; cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; + sd-uhs-sdr50; status = "okay"; }; @@ -498,6 +557,32 @@ reg = <0x12>; }; + composite-in@20 { + compatible = "adi,adv7180cp"; + reg = <0x20>; + remote = <&vin1>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7180_in: endpoint { + remote-endpoint = <&composite_con_in>; + }; + }; + + port@3 { + reg = <3>; + adv7180_out: endpoint { + bus-width = <8>; + remote-endpoint = <&vin1ep>; + }; + }; + }; + }; + hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; @@ -524,7 +609,34 @@ port@1 { reg = <1>; adv7511_out: endpoint { - remote-endpoint = <&hdmi_con>; + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; + + hdmi-in@4c { + compatible = "adi,adv7612"; + reg = <0x4c>; + interrupt-parent = <&gpio4>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + default-input = <0>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7612_in: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + + port@2 { + reg = <2>; + adv7612_out: endpoint { + remote-endpoint = <&vin0ep2>; }; }; }; @@ -578,3 +690,42 @@ &ssi1 { shared-pin; }; + +/* HDMI video input */ +&vin0 { + status = "okay"; + pinctrl-0 = <&vin0_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin0ep2: endpoint { + remote-endpoint = <&adv7612_out>; + bus-width = <24>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + data-active = <1>; + }; + }; +}; + +/* composite video input */ +&vin1 { + pinctrl-0 = <&vin1_pins>; + pinctrl-names = "default"; + + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin1ep: endpoint { + remote-endpoint = <&adv7180_out>; + bus-width = <8>; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 4de6041d61f9..13b980f27bbc 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -529,7 +529,7 @@ status = "disabled"; }; - pfc: pfc@e6060000 { + pfc: pin-controller@e6060000 { compatible = "renesas,pfc-r8a7793"; reg = <0 0xe6060000 0 0x250>; }; @@ -542,6 +542,7 @@ dmas = <&dmac0 0xcd>, <&dmac0 0xce>, <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -554,6 +555,7 @@ dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -566,6 +568,7 @@ dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index a19b884fb258..7d9a81d970d8 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -820,16 +820,14 @@ 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - usb@0,1 { + usb@1,0 { reg = <0x800 0 0 0 0>; - device_type = "pci"; phys = <&usb0 0>; phy-names = "usb"; }; - usb@0,2 { + usb@2,0 { reg = <0x1000 0 0 0 0>; - device_type = "pci"; phys = <&usb0 0>; phy-names = "usb"; }; @@ -855,16 +853,14 @@ 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - usb@0,1 { - reg = <0x800 0 0 0 0>; - device_type = "pci"; + usb@1,0 { + reg = <0x10800 0 0 0 0>; phys = <&usb2 0>; phy-names = "usb"; }; - usb@0,2 { - reg = <0x1000 0 0 0 0>; - device_type = "pci"; + usb@2,0 { + reg = <0x11000 0 0 0 0>; phys = <&usb2 0>; phy-names = "usb"; }; diff --git a/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi index 65cb50f0c29f..238d14bb0ebe 100644 --- a/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi +++ b/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi @@ -10,10 +10,11 @@ / { panel { - compatible = "mitsubishi,aa104xd12", "panel-dpi"; + compatible = "mitsubishi,aa104xd12", "panel-lvds"; width-mm = <210>; height-mm = <158>; + data-mapping = "jeida-18"; panel-timing { /* 1024x768 @65Hz */ diff --git a/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi index a07ebf8f6938..04aafd479775 100644 --- a/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi +++ b/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi @@ -10,10 +10,11 @@ / { panel { - compatible = "mitsubishi,aa121td01", "panel-dpi"; + compatible = "mitsubishi,aa121td01", "panel-lvds"; width-mm = <261>; height-mm = <163>; + data-mapping = "jeida-18"; panel-timing { /* 1280x800 @60Hz */ diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts index 275092a950ef..1b55192b7d04 100644 --- a/arch/arm/boot/dts/rk3229-evb.dts +++ b/arch/arm/boot/dts/rk3229-evb.dts @@ -58,6 +58,17 @@ #clock-cells = <0>; }; + vcc_host: vcc-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc_host"; + regulator-always-on; + regulator-boot-on; + }; + vcc_phy: vcc-phy-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -85,6 +96,69 @@ status = "okay"; }; +&pinctrl { + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + &uart2 { status = "okay"; }; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host2_ehci { + status = "okay"; +}; + +&usb_host2_ohci { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 48a0c1cf4301..f3e4ffd9f818 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -66,10 +66,7 @@ compatible = "arm,cortex-a7"; reg = <0xf00>; resets = <&cru SRST_CORE0>; - operating-points = < - /* KHz uV */ - 816000 1000000 - >; + operating-points-v2 = <&cpu0_opp_table>; #cooling-cells = <2>; /* min followed by max */ clock-latency = <40000>; clocks = <&cru ARMCLK>; @@ -80,6 +77,7 @@ compatible = "arm,cortex-a7"; reg = <0xf01>; resets = <&cru SRST_CORE1>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu2: cpu@f02 { @@ -87,6 +85,7 @@ compatible = "arm,cortex-a7"; reg = <0xf02>; resets = <&cru SRST_CORE2>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu3: cpu@f03 { @@ -94,6 +93,35 @@ compatible = "arm,cortex-a7"; reg = <0xf03>; resets = <&cru SRST_CORE3>; + operating-points-v2 = <&cpu0_opp_table>; + }; + }; + + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <950000>; + clock-latency-ns = <40000>; + opp-suspend; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <975000>; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1000000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1175000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1275000>; }; }; @@ -182,8 +210,61 @@ }; grf: syscon@11000000 { - compatible = "syscon"; + compatible = "syscon", "simple-mfd"; reg = <0x11000000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy0: usb2-phy@760 { + compatible = "rockchip,rk3228-usb2phy"; + reg = <0x0760 0x0c>; + clocks = <&cru SCLK_OTGPHY0>; + clock-names = "phyclk"; + clock-output-names = "usb480m_phy0"; + #clock-cells = <0>; + status = "disabled"; + + u2phy0_otg: otg-port { + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "otg-bvalid", "otg-id", + "linestate"; + #phy-cells = <0>; + status = "disabled"; + }; + + u2phy0_host: host-port { + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "linestate"; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + u2phy1: usb2-phy@800 { + compatible = "rockchip,rk3228-usb2phy"; + reg = <0x0800 0x0c>; + clocks = <&cru SCLK_OTGPHY1>; + clock-names = "phyclk"; + clock-output-names = "usb480m_phy1"; + #clock-cells = <0>; + status = "disabled"; + + u2phy1_otg: otg-port { + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "linestate"; + #phy-cells = <0>; + status = "disabled"; + }; + + u2phy1_host: host-port { + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "linestate"; + #phy-cells = <0>; + status = "disabled"; + }; + }; }; uart0: serial@11010000 { @@ -280,6 +361,14 @@ status = "disabled"; }; + wdt: watchdog@110a0000 { + compatible = "snps,dw-wdt"; + reg = <0x110a0000 0x100>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_CPU>; + status = "disabled"; + }; + pwm0: pwm@110b0000 { compatible = "rockchip,rk3288-pwm"; reg = <0x110b0000 0x10>; @@ -338,8 +427,18 @@ rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; - assigned-clocks = <&cru PLL_GPLL>; - assigned-clock-rates = <594000000>; + assigned-clocks = + <&cru PLL_GPLL>, <&cru ARMCLK>, + <&cru PLL_CPLL>, <&cru ACLK_PERI>, + <&cru HCLK_PERI>, <&cru PCLK_PERI>, + <&cru ACLK_CPU>, <&cru HCLK_CPU>, + <&cru PCLK_CPU>; + assigned-clock-rates = + <594000000>, <816000000>, + <500000000>, <150000000>, + <150000000>, <75000000>, + <150000000>, <150000000>, + <75000000>; }; thermal-zones { @@ -388,6 +487,8 @@ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; clock-names = "tsadc", "apb_pclk"; + assigned-clocks = <&cru SCLK_TSADC>; + assigned-clock-rates = <32768>; resets = <&cru SRST_TSADC>; reset-names = "tsadc-apb"; pinctrl-names = "init", "default", "sleep"; @@ -419,6 +520,89 @@ status = "disabled"; }; + usb_otg: usb@30040000 { + compatible = "rockchip,rk3228-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0x30040000 0x40000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG>; + clock-names = "otg"; + dr_mode = "otg"; + g-np-tx-fifo-size = <16>; + g-rx-fifo-size = <280>; + g-tx-fifo-size = <256 128 128 64 32 16>; + g-use-dma; + phys = <&u2phy0_otg>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usb_host0_ehci: usb@30080000 { + compatible = "generic-ehci"; + reg = <0x30080000 0x20000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST0>, <&u2phy0>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy0_host>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host0_ohci: usb@300a0000 { + compatible = "generic-ohci"; + reg = <0x300a0000 0x20000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST0>, <&u2phy0>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy0_host>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host1_ehci: usb@300c0000 { + compatible = "generic-ehci"; + reg = <0x300c0000 0x20000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST1>, <&u2phy1>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy1_otg>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host1_ohci: usb@300e0000 { + compatible = "generic-ohci"; + reg = <0x300e0000 0x20000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST1>, <&u2phy1>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy1_otg>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host2_ehci: usb@30100000 { + compatible = "generic-ehci"; + reg = <0x30100000 0x20000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST2>, <&u2phy1>; + phys = <&u2phy1_host>; + phy-names = "usb"; + clock-names = "usbhost", "utmi"; + status = "disabled"; + }; + + usb_host2_ohci: usb@30120000 { + compatible = "generic-ohci"; + reg = <0x30120000 0x20000>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST2>, <&u2phy1>; + clock-names = "usbhost", "utmi"; + phys = <&u2phy1_host>; + phy-names = "usb"; + status = "disabled"; + }; + gmac: ethernet@30200000 { compatible = "rockchip,rk3228-gmac"; reg = <0x30200000 0x10000>; @@ -621,9 +805,9 @@ <0 12 RK_FUNC_1 &pcfg_pull_none>, <0 13 RK_FUNC_1 &pcfg_pull_none>, <0 14 RK_FUNC_1 &pcfg_pull_none>, - <1 2 RK_FUNC_1 &pcfg_pull_none>, - <1 4 RK_FUNC_1 &pcfg_pull_none>, - <1 5 RK_FUNC_1 &pcfg_pull_none>; + <1 2 RK_FUNC_2 &pcfg_pull_none>, + <1 4 RK_FUNC_2 &pcfg_pull_none>, + <1 5 RK_FUNC_2 &pcfg_pull_none>; }; }; @@ -693,10 +877,15 @@ uart2 { uart2_xfer: uart2-xfer { - rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>, + rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up>, <1 19 RK_FUNC_2 &pcfg_pull_none>; }; + uart21_xfer: uart21-xfer { + rockchip,pins = <1 10 RK_FUNC_2 &pcfg_pull_up>, + <1 9 RK_FUNC_2 &pcfg_pull_none>; + }; + uart2_cts: uart2-cts { rockchip,pins = <0 25 RK_FUNC_1 &pcfg_pull_none>; }; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts index d0b3204a4799..b11a282c334c 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload.dts +++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts @@ -48,6 +48,19 @@ model = "Firefly-RK3288-reload"; compatible = "firefly,firefly-rk3288-reload", "rockchip,rk3288"; + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + + button-recovery { + label = "Recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <0>; + }; + }; + gpio-keys { compatible = "gpio-keys"; @@ -246,6 +259,10 @@ status = "okay"; }; +&saradc { + status = "okay"; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 10793ac18599..32dabae12e67 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -49,6 +49,19 @@ reg = <0 0x80000000>; }; + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + + button-recovery { + label = "Recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <0>; + }; + }; + dovdd_1v8: dovdd-1v8-regulator { compatible = "regulator-fixed"; regulator-name = "dovdd_1v8"; @@ -219,6 +232,11 @@ status = "ok"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &hdmi { ddc-i2c-bus = <&i2c5>; status = "okay"; diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index f0778a46bca9..749a9b86e6e2 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -113,6 +113,11 @@ tx_delay = <0x30>; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &i2c0 { status = "okay"; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index a23a94811be8..8ed25e9f60bc 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -125,10 +125,6 @@ gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; - /* Always on as the rockchip usb phy doesn't have a vbus-supply - * property - */ - regulator-always-on; regulator-name = "vcc_host"; }; @@ -279,6 +275,10 @@ status = "okay"; }; +&usbphy1 { + vbus-supply = <&vcc_usb_host>; +}; + &usb_host0_ehci { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 5d1eb0a25827..d709fa1847f9 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -161,6 +161,11 @@ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &hdmi { ddc-i2c-bus = <&i2c5>; status = "okay"; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index ad5d6022e95f..2484f11761ea 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -43,6 +43,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/clock/rk3288-cru.h> +#include <dt-bindings/power/rk3288-power.h> #include <dt-bindings/thermal/thermal.h> #include <dt-bindings/power/rk3288-power.h> #include <dt-bindings/soc/rockchip,boot-mode.h> @@ -1125,6 +1126,48 @@ }; }; + gpu: mali@ffa30000 { + compatible = "rockchip,rk3288-mali", "arm,mali-t760", "arm,mali-midgard"; + reg = <0xffa30000 0x10000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&cru ACLK_GPU>; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&power RK3288_PD_GPU>; + status = "disabled"; + }; + + gpu_opp_table: gpu-opp-table { + compatible = "operating-points-v2"; + + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <950000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <950000>; + }; + opp@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1000000>; + }; + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <1100000>; + }; + opp@500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1200000>; + }; + opp@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1250000>; + }; + }; + qos_gpu_r: qos@ffaa0000 { compatible = "syscon"; reg = <0xffaa0000 0x20>; diff --git a/arch/arm/boot/dts/rk1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts index 3956cff4ca79..58cf4ac079c3 100644 --- a/arch/arm/boot/dts/rk1108-evb.dts +++ b/arch/arm/boot/dts/rv1108-evb.dts @@ -40,11 +40,11 @@ /dts-v1/; -#include "rk1108.dtsi" +#include "rv1108.dtsi" / { - model = "Rockchip RK1108 Evaluation board"; - compatible = "rockchip,rk1108-evb", "rockchip,rk1108"; + model = "Rockchip RV1108 Evaluation board"; + compatible = "rockchip,rv1108-evb", "rockchip,rv1108"; memory@60000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/rk1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index 1297924db6ad..437098b556eb 100644 --- a/arch/arm/boot/dts/rk1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -47,7 +47,7 @@ #address-cells = <1>; #size-cells = <1>; - compatible = "rockchip,rk1108"; + compatible = "rockchip,rv1108"; interrupt-parent = <&gic>; @@ -113,7 +113,7 @@ }; uart2: serial@10210000 { - compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart"; + compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart"; reg = <0x10210000 0x100>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; @@ -127,7 +127,7 @@ }; uart1: serial@10220000 { - compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart"; + compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart"; reg = <0x10220000 0x100>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; @@ -141,7 +141,7 @@ }; uart0: serial@10230000 { - compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart"; + compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart"; reg = <0x10230000 0x100>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; @@ -155,17 +155,17 @@ }; grf: syscon@10300000 { - compatible = "rockchip,rk1108-grf", "syscon"; + compatible = "rockchip,rv1108-grf", "syscon"; reg = <0x10300000 0x1000>; }; pmugrf: syscon@20060000 { - compatible = "rockchip,rk1108-pmugrf", "syscon"; + compatible = "rockchip,rv1108-pmugrf", "syscon"; reg = <0x20060000 0x1000>; }; cru: clock-controller@20200000 { - compatible = "rockchip,rk1108-cru"; + compatible = "rockchip,rv1108-cru"; reg = <0x20200000 0x1000>; rockchip,grf = <&grf>; #clock-cells = <1>; @@ -173,7 +173,7 @@ }; emmc: dwmmc@30110000 { - compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc"; + compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc"; clock-freq-min-max = <400000 150000000>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; @@ -185,7 +185,7 @@ }; sdio: dwmmc@30120000 { - compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc"; + compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc"; clock-freq-min-max = <400000 150000000>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; @@ -197,7 +197,7 @@ }; sdmmc: dwmmc@30130000 { - compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc"; + compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc"; clock-freq-min-max = <400000 100000000>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 8067c71c3a38..cc06da394366 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -135,6 +135,12 @@ #size-cells = <1>; ranges; + nfc_sram: sram@00100000 { + compatible = "mmio-sram"; + no-memory-wc; + reg = <0x00100000 0x2400>; + }; + usb0: gadget@00300000 { #address-cells = <1>; #size-cells = <0>; @@ -291,6 +297,32 @@ cache-level = <2>; }; + ebi: ebi@10000000 { + compatible = "atmel,sama5d3-ebi"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&hsmc>; + reg = <0x10000000 0x10000000 + 0x40000000 0x30000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x60000000 0x10000000 + 0x2 0x0 0x70000000 0x10000000 + 0x3 0x0 0x80000000 0x10000000>; + clocks = <&mck>; + status = "disabled"; + + nand_controller: nand-controller { + compatible = "atmel,sama5d3-nand-controller"; + atmel,nfc-sram = <&nfc_sram>; + atmel,nfc-io = <&nfc_io>; + ecc-engine = <&pmecc>; + #address-cells = <2>; + #size-cells = <1>; + ranges; + status = "disabled"; + }; + }; + nand0: nand@80000000 { compatible = "atmel,sama5d2-nand"; #address-cells = <1>; @@ -347,6 +379,11 @@ status = "disabled"; }; + nfc_io: nfc-io@c0000000 { + compatible = "atmel,sama5d3-nfc-io", "syscon"; + reg = <0xc0000000 0x8000000>; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; @@ -762,6 +799,18 @@ atmel,clk-output-range = <0 83000000>; }; + can0_clk: can0_clk { + #clock-cells = <0>; + reg = <56>; + atmel,clk-output-range = <0 83000000>; + }; + + can1_clk: can1_clk { + #clock-cells = <0>; + reg = <57>; + atmel,clk-output-range = <0 83000000>; + }; + classd_clk: classd_clk { #clock-cells = <0>; reg = <59>; @@ -890,6 +939,18 @@ #clock-cells = <0>; reg = <55>; }; + + can0_gclk: can0_gclk { + #clock-cells = <0>; + reg = <56>; + atmel,clk-output-range = <0 80000000>; + }; + + can1_gclk: can1_gclk { + #clock-cells = <0>; + reg = <57>; + atmel,clk-output-range = <0 80000000>; + }; }; }; @@ -986,6 +1047,22 @@ clock-names = "t0_clk", "slow_clk"; }; + hsmc: hsmc@f8014000 { + compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd"; + reg = <0xf8014000 0x1000>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>; + clocks = <&hsmc_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pmecc: ecc-engine@ffffc070 { + compatible = "atmel,sama5d2-pmecc"; + reg = <0xffffc070 0x490>, + <0xffffc500 0x100>; + }; + }; + pdmic: pdmic@f8018000 { compatible = "atmel,sama5d2-pdmic"; reg = <0xf8018000 0x124>; @@ -1065,6 +1142,14 @@ status = "disabled"; }; + pwm0: pwm@f802c000 { + compatible = "atmel,sama5d2-pwm"; + reg = <0xf802c000 0x4000>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>; + #pwm-cells = <3>; + clocks = <&pwm_clk>; + }; + sfr: sfr@f8030000 { compatible = "atmel,sama5d2-sfr", "syscon"; reg = <0xf8030000 0x98>; @@ -1144,6 +1229,22 @@ clocks = <&clk32k>; }; + can0: can@f8054000 { + compatible = "bosch,m_can"; + reg = <0xf8054000 0x4000>, <0x210000 0x4000>; + reg-names = "m_can", "message_ram"; + interrupts = <56 IRQ_TYPE_LEVEL_HIGH 7>, + <64 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-names = "int0", "int1"; + clocks = <&can0_clk>, <&can0_gclk>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&can0_gclk>; + assigned-clock-parents = <&utmi>; + assigned-clock-rates = <40000000>; + bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>; + status = "disabled"; + }; + spi1: spi@fc000000 { compatible = "atmel,at91rm9200-spi"; reg = <0xfc000000 0x100>; @@ -1305,6 +1406,22 @@ status = "okay"; }; + can1: can@fc050000 { + compatible = "bosch,m_can"; + reg = <0xfc050000 0x4000>, <0x210000 0x4000>; + reg-names = "m_can", "message_ram"; + interrupts = <57 IRQ_TYPE_LEVEL_HIGH 7>, + <65 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-names = "int0", "int1"; + clocks = <&can1_clk>, <&can1_gclk>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&can1_gclk>; + assigned-clock-parents = <&utmi>; + assigned-clock-rates = <40000000>; + bosch,mram-cfg = <0x1100 0 0 64 0 0 32 32>; + status = "disabled"; + }; + sfrbu: sfr@fc05c000 { compatible = "atmel,sama5d2-sfrbu", "syscon"; reg = <0xfc05c000 0x20>; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index b06448ba6649..554d0bdedc7a 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -429,6 +429,22 @@ clocks = <&trng_clk>; }; + hsmc: hsmc@ffffc000 { + compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd"; + reg = <0xffffc000 0x1000>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>; + clocks = <&hsmc_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pmecc: ecc-engine@ffffc070 { + compatible = "atmel,at91sam9g45-pmecc"; + reg = <0xffffc070 0x490>, + <0xffffc500 0x100>; + }; + }; + dma0: dma-controller@ffffe600 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffe600 0x200>; @@ -554,6 +570,66 @@ }; }; + ebi { + pinctrl_ebi_addr: ebi-addr-0 { + atmel,pins = + <AT91_PIOE 1 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ebi_nand_addr: ebi-addr-1 { + atmel,pins = + <AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ebi_cs0: ebi-cs0-0 { + atmel,pins = + <AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ebi_cs1: ebi-cs1-0 { + atmel,pins = + <AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ebi_cs2: ebi-cs2-0 { + atmel,pins = + <AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ebi_nwait: ebi-nwait-0 { + atmel,pins = + <AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ebi_nwr1_nbs1: ebi-nwr1-nbs1-0 { + atmel,pins = + <AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + i2c0 { pinctrl_i2c0: i2c0-0 { atmel,pins = @@ -1326,6 +1402,12 @@ }; }; + nfc_sram: sram@200000 { + compatible = "mmio-sram"; + no-memory-wc; + reg = <0x200000 0x2400>; + }; + usb0: gadget@00500000 { #address-cells = <1>; #size-cells = <0>; @@ -1461,36 +1543,35 @@ status = "disabled"; }; - nand0: nand@60000000 { - compatible = "atmel,at91rm9200-nand"; - #address-cells = <1>; + ebi: ebi@10000000 { + compatible = "atmel,sama5d3-ebi"; + #address-cells = <2>; #size-cells = <1>; - ranges; - reg = < 0x60000000 0x01000000 /* EBI CS3 */ - 0xffffc070 0x00000490 /* SMC PMECC regs */ - 0xffffc500 0x00000100 /* SMC PMECC Error Location regs */ - 0x00110000 0x00018000 /* ROM code */ - >; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>; - atmel,nand-addr-offset = <21>; - atmel,nand-cmd-offset = <22>; - atmel,nand-has-dma; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand0_ale_cle>; - atmel,pmecc-lookup-table-offset = <0x0 0x8000>; + atmel,smc = <&hsmc>; + reg = <0x10000000 0x10000000 + 0x40000000 0x30000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x40000000 0x10000000 + 0x2 0x0 0x50000000 0x10000000 + 0x3 0x0 0x60000000 0x10000000>; + clocks = <&mck>; status = "disabled"; - nfc@70000000 { - compatible = "atmel,sama5d3-nfc"; - #address-cells = <1>; + nand_controller: nand-controller { + compatible = "atmel,sama5d3-nand-controller"; + atmel,nfc-sram = <&nfc_sram>; + atmel,nfc-io = <&nfc_io>; + ecc-engine = <&pmecc>; + #address-cells = <2>; #size-cells = <1>; - reg = < - 0x70000000 0x08000000 /* NFC Command Registers */ - 0xffffc000 0x00000070 /* NFC HSMC regs */ - 0x00200000 0x00100000 /* NFC SRAM banks */ - >; - clocks = <&hsmc_clk>; + ranges; + status = "disabled"; }; }; + + nfc_io: nfc-io@70000000 { + compatible = "atmel,sama5d3-nfc-io", "syscon"; + reg = <0x70000000 0x8000000>; + }; }; }; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index b5e111b29da1..9506daf5efb6 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -36,43 +36,82 @@ }; }; - nand0: nand@60000000 { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - atmel,has-pmecc; - atmel,pmecc-cap = <4>; - atmel,pmecc-sector-size = <512>; - nand-on-flash-bbt; + ebi@10000000 { + pinctrl-0 = <&pinctrl_ebi_addr &pinctrl_ebi_cs0>; + pinctr-name = "default"; status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; + nor: flash@0,0 { + compatible = "cfi-flash"; + linux,mtd-name = "physmap-flash.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + atmel,smc-read-mode = "nrd"; + atmel,smc-write-mode = "nwe"; + atmel,smc-bus-width = <16>; + atmel,smc-ncs-rd-setup-ns = <0>; + atmel,smc-ncs-wr-setup-ns = <0>; + atmel,smc-nwe-setup-ns = <8>; + atmel,smc-nrd-setup-ns = <16>; + atmel,smc-ncs-rd-pulse-ns = <84>; + atmel,smc-ncs-wr-pulse-ns = <84>; + atmel,smc-nrd-pulse-ns = <76>; + atmel,smc-nwe-pulse-ns = <76>; + atmel,smc-nrd-cycle-ns = <107>; + atmel,smc-nwe-cycle-ns = <84>; + atmel,smc-tdf-ns = <16>; }; - bootloader@40000 { - label = "bootloader"; - reg = <0x40000 0x80000>; - }; + nand_controller: nand-controller { + status = "okay"; - bootloaderenv@c0000 { - label = "bootloader env"; - reg = <0xc0000 0xc0000>; - }; + nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; - dtb@180000 { - label = "device tree"; - reg = <0x180000 0x80000>; - }; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x600000>; - }; + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x0f800000>; + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi index dc7572bc7ff0..75cbf4d4ab1a 100644 --- a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi @@ -148,43 +148,60 @@ }; }; - nand0: nand@60000000 { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - atmel,has-pmecc; - atmel,pmecc-cap = <4>; - atmel,pmecc-sector-size = <512>; - nand-on-flash-bbt; + ebi: ebi@10000000 { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; + nand_controller: nand-controller { + status = "okay"; + + nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; - bootloader@40000 { - label = "bootloader"; - reg = <0x40000 0x80000>; - }; + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; - bootloaderenv@c0000 { - label = "bootloader env"; - reg = <0xc0000 0xc0000>; - }; + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; - dtb@180000 { - label = "device tree"; - reg = <0x180000 0x80000>; - }; + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x600000>; - }; + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x0f800000>; + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index d3889c9d25a9..2fa36c525957 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -124,6 +124,12 @@ #size-cells = <1>; ranges; + nfc_sram: sram@100000 { + compatible = "mmio-sram"; + no-memory-wc; + reg = <0x100000 0x2400>; + }; + usb0: gadget@00400000 { #address-cells = <1>; #size-cells = <0>; @@ -280,37 +286,37 @@ cache-level = <2>; }; - nand0: nand@80000000 { - compatible = "atmel,sama5d4-nand", "atmel,at91rm9200-nand"; - #address-cells = <1>; + ebi: ebi@10000000 { + compatible = "atmel,sama5d3-ebi"; + #address-cells = <2>; #size-cells = <1>; - ranges; - reg = < 0x80000000 0x08000000 /* EBI CS3 */ - 0xfc05c070 0x00000490 /* SMC PMECC regs */ - 0xfc05c500 0x00000100 /* SMC PMECC Error Location regs */ - >; - interrupts = <22 IRQ_TYPE_LEVEL_HIGH 6>; - atmel,nand-addr-offset = <21>; - atmel,nand-cmd-offset = <22>; - atmel,nand-has-dma; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; + atmel,smc = <&hsmc>; + reg = <0x10000000 0x10000000 + 0x60000000 0x28000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x60000000 0x10000000 + 0x2 0x0 0x70000000 0x10000000 + 0x3 0x0 0x80000000 0x8000000>; + clocks = <&mck>; status = "disabled"; - nfc@90000000 { - compatible = "atmel,sama5d3-nfc"; - #address-cells = <1>; + nand_controller: nand-controller { + compatible = "atmel,sama5d3-nand-controller"; + atmel,nfc-sram = <&nfc_sram>; + atmel,nfc-io = <&nfc_io>; + ecc-engine = <&pmecc>; + #address-cells = <2>; #size-cells = <1>; - reg = < - 0x90000000 0x08000000 /* NFC Command Registers */ - 0xfc05c000 0x00000070 /* NFC HSMC regs */ - 0x00100000 0x00100000 /* NFC SRAM banks */ - >; - clocks = <&hsmc_clk>; - atmel,write-by-sram; + ranges; + status = "disabled"; }; }; + nfc_io: nfc-io@90000000 { + compatible = "atmel,sama5d3-nfc-io", "syscon"; + reg = <0x90000000 0x8000000>; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; @@ -1287,6 +1293,22 @@ status = "okay"; }; + hsmc: smc@fc05c000 { + compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd"; + reg = <0xfc05c000 0x1000>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 6>; + clocks = <&hsmc_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pmecc: ecc-engine@ffffc070 { + compatible = "atmel,sama5d4-pmecc"; + reg = <0xfc05c070 0x490>, + <0xfc05c500 0x100>; + }; + }; + rstc@fc068600 { compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc"; reg = <0xfc068600 0x10>; @@ -1447,6 +1469,113 @@ }; }; + ebi { + pinctrl_ebi_addr: ebi-addr-0 { + atmel,pins = + <AT91_PIOE 0 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 1 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ebi_nand_addr: ebi-addr-1 { + atmel,pins = + <AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ebi_cs0: ebi-cs0-0 { + atmel,pins = + <AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ebi_cs1: ebi-cs1-0 { + atmel,pins = + <AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ebi_cs2: ebi-cs2-0 { + atmel,pins = + <AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ebi_cs3: ebi-cs3-0 { + atmel,pins = + <AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ebi_data_0_7: ebi-data-lsb-0 { + atmel,pins = + <AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ebi_data_8_15: ebi-data-msb-0 { + atmel,pins = + <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE + AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE + AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE + AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE + AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE + AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE + AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE + AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_ebi_nandrdy: ebi-nandrdy-0 { + atmel,pins = + <AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ebi_nrd_nandoe: ebi-nrd-nandoe-0 { + atmel,pins = + <AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ebi_nwait: ebi-nwait-0 { + atmel,pins = + <AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ebi_nwe_nandwe: ebi-nwe-nandwe-0 { + atmel,pins = + <AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ebi_nwr1_nbs1: ebi-nwr1-nbs1-0 { + atmel,pins = + <AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + i2c0 { pinctrl_i2c0: i2c0-0 { atmel,pins = diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 6b01ab354e88..4ea5c5a16c57 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -444,7 +444,7 @@ status = "disabled"; }; - pfc: pfc@e6050000 { + pfc: pin-controller@e6050000 { compatible = "renesas,pfc-sh73a0"; reg = <0xe6050000 0x8000>, <0xe605801c 0x1c>; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index b2674bdb8e6a..7e24dc8e82d4 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -557,7 +557,7 @@ interrupts = <0 115 4>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */ - clocks = <&emac0_clk>; + clocks = <&emac_0_clk>; clock-names = "stmmaceth"; resets = <&rst EMAC0_RESET>; reset-names = "stmmaceth"; @@ -575,7 +575,7 @@ interrupts = <0 120 4>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */ - clocks = <&emac1_clk>; + clocks = <&emac_1_clk>; clock-names = "stmmaceth"; resets = <&rst EMAC1_RESET>; reset-names = "stmmaceth"; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi index 94e088473823..3a32de9ded3b 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi @@ -130,13 +130,13 @@ }; &i2c1 { - speed-mode = <0>; status = "okay"; /* * adjust the falling times to decrease the i2c frequency to 50Khz * because the LCD module does not work at the standard 100Khz */ + clock-frequency = <100000>; i2c-sda-falling-time-ns = <6000>; i2c-scl-falling-time-ns = <6000>; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts index 7b49395452b6..b280e6494193 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts @@ -86,7 +86,7 @@ &i2c0 { status = "okay"; - speed-mode = <0>; + clock-frequency = <100000>; adxl345: adxl345@0 { compatible = "adi,adxl345"; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts index 21e397287e29..c2eb88aab8b3 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts @@ -58,7 +58,7 @@ &i2c0 { status = "okay"; - speed-mode = <0>; + clock-frequency = <100000>; stmpe1: stmpe811@41 { compatible = "st,stmpe811"; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts index 893198049397..655fe87e272d 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts @@ -69,34 +69,7 @@ * to be added to the gmac1 device tree blob. */ ethernet0 = &gmac1; - }; - - leds { - compatible = "gpio-leds"; - - hps_led0 { - label = "hps:green:led0"; /* ALIVE_LED_GR */ - gpios = <&portb 19 0>; /* HPS_GPIO48 */ - linux,default-trigger = "heartbeat"; - }; - - hps_led1 { - label = "hps:red:led0"; /* ALIVE_LED_RD */ - gpios = <&portb 24 0>; /* HPS_GPIO53 */ - linux,default-trigger = "none"; - }; - - hps_led2 { - label = "hps:green:led1"; /* LINK2HOST_LED_GR */ - gpios = <&portb 25 0>; /* HPS_GPIO54 */ - linux,default-trigger = "heartbeat"; - }; - - hps_led3 { - label = "hps:red:led1"; /* LINK2HOST_LED_RD */ - gpios = <&portc 7 0>; /* HPS_GPIO65 */ - linux,default-trigger = "none"; - }; + ethernet1 = &gmac0; }; gpio-keys { @@ -203,69 +176,39 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; - eeprom@51 { - compatible = "at,24c01"; - pagesize = <8>; - reg = <0x51>; - }; }; i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; - eeprom@51 { - compatible = "at,24c01"; - pagesize = <8>; - reg = <0x51>; - }; }; i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; - eeprom@51 { - compatible = "at,24c01"; - pagesize = <8>; - reg = <0x51>; - }; }; i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; - eeprom@51 { - compatible = "at,24c01"; - pagesize = <8>; - reg = <0x51>; - }; }; i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <4>; - eeprom@51 { - compatible = "at,24c01"; - pagesize = <8>; - reg = <0x51>; - }; }; i2c@5 { #address-cells = <1>; #size-cells = <0>; reg = <5>; - eeprom@51 { - compatible = "at,24c01"; - pagesize = <8>; - reg = <0x51>; - }; }; - i2c@6 { + i2c@6 { /* Backplane EEPROM */ #address-cells = <1>; #size-cells = <0>; reg = <6>; @@ -276,7 +219,7 @@ }; }; - i2c@7 { + i2c@7 { /* Power board EEPROM */ #address-cells = <1>; #size-cells = <0>; reg = <7>; @@ -300,6 +243,44 @@ }; }; +&qspi { + status = "okay"; + + n25q128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128"; + reg = <0>; /* chip select */ + spi-max-frequency = <100000000>; + m25p,fast-read; + + cdns,page-size = <256>; + cdns,block-size = <16>; + cdns,read-delay = <4>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + }; + + n25q00@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q00"; + reg = <1>; /* chip select */ + spi-max-frequency = <100000000>; + m25p,fast-read; + + cdns,page-size = <256>; + cdns,block-size = <16>; + cdns,read-delay = <4>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + }; +}; + &usb0 { dr_mode = "host"; status = "okay"; diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index b6331146aa02..dcda0bbefe5b 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -48,6 +48,7 @@ /dts-v1/; #include "stm32f429.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> / { model = "STMicroelectronics STM32429i-EVAL board"; @@ -66,6 +67,14 @@ serial0 = &usart1; }; + clocks { + clk_ext_camera: clk-ext-camera { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + soc { dma-ranges = <0xc0000000 0x0 0x10000000>; }; @@ -124,6 +133,16 @@ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHSULPI)>; clock-names = "main_clk"; }; + + panel_rgb: panel-rgb { + compatible = "ampire,am-480272h3tmqw-t01h"; + status = "okay"; + port { + panel_in_rgb: endpoint { + remote-endpoint = <<dc_out_rgb>; + }; + }; + }; }; &adc { @@ -141,10 +160,79 @@ clock-frequency = <25000000>; }; +&crc { + status = "okay"; +}; + +&dcmi { + status = "okay"; + + port { + dcmi_0: endpoint { + remote-endpoint = <&ov2640_0>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + }; + }; +}; + &i2c1 { pinctrl-0 = <&i2c1_pins>; pinctrl-names = "default"; status = "okay"; + + ov2640: camera@30 { + compatible = "ovti,ov2640"; + reg = <0x30>; + resetb-gpios = <&stmpegpio 2 GPIO_ACTIVE_HIGH>; + pwdn-gpios = <&stmpegpio 0 GPIO_ACTIVE_LOW>; + clocks = <&clk_ext_camera>; + clock-names = "xvclk"; + status = "okay"; + + port { + ov2640_0: endpoint { + remote-endpoint = <&dcmi_0>; + }; + }; + }; + + stmpe1600: stmpe1600@42 { + compatible = "st,stmpe1600"; + reg = <0x42>; + irq-gpio = <&gpioi 8 0>; + irq-trigger = <3>; + interrupts = <8 3>; + interrupt-parent = <&exti>; + interrupt-controller; + wakeup-source; + + stmpegpio: stmpe_gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + }; +}; + +&iwdg { + status = "okay"; + timeout-sec = <32>; +}; + +<dc { + status = "okay"; + pinctrl-0 = <<dc_pins>; + pinctrl-names = "default"; + dma-ranges; + + port { + ltdc_out_rgb: endpoint { + remote-endpoint = <&panel_in_rgb>; + }; + }; }; &mac { diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts index 191fa50e34eb..ae47cde7952f 100644 --- a/arch/arm/boot/dts/stm32f429-disco.dts +++ b/arch/arm/boot/dts/stm32f429-disco.dts @@ -102,6 +102,10 @@ clock-frequency = <8000000>; }; +&crc { + status = "okay"; +}; + &rtc { assigned-clocks = <&rcc 1 CLK_RTC>; assigned-clock-parents = <&rcc 1 CLK_LSI>; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index b2a2b5c38caa..a8113dc879cf 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -65,7 +65,7 @@ clock-frequency = <32768>; }; - clk-lsi { + clk_lsi: clk-lsi { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32000>; @@ -307,6 +307,13 @@ status = "disabled"; }; + iwdg: watchdog@40003000 { + compatible = "st,stm32-iwdg"; + reg = <0x40003000 0x400>; + clocks = <&clk_lsi>; + status = "disabled"; + }; + usart2: serial@40004400 { compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40004400 0x400>; @@ -549,7 +556,17 @@ reg = <0x40007000 0x400>; }; - pin-controller { + ltdc: display-controller@40016800 { + compatible = "st,stm32-ltdc"; + reg = <0x40016800 0x200>; + interrupts = <88>, <89>; + resets = <&rcc STM32F4_APB2_RESET(LTDC)>; + clocks = <&rcc 1 CLK_LCD>; + clock-names = "lcd"; + status = "disabled"; + }; + + pinctrl: pin-controller { #address-cells = <1>; #size-cells = <1>; compatible = "st,stm32f429-pinctrl"; @@ -561,6 +578,8 @@ gpioa: gpio@40020000 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x0 0x400>; clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>; st,bank-name = "GPIOA"; @@ -569,6 +588,8 @@ gpiob: gpio@40020400 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x400 0x400>; clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>; st,bank-name = "GPIOB"; @@ -577,6 +598,8 @@ gpioc: gpio@40020800 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x800 0x400>; clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>; st,bank-name = "GPIOC"; @@ -585,6 +608,8 @@ gpiod: gpio@40020c00 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0xc00 0x400>; clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>; st,bank-name = "GPIOD"; @@ -593,6 +618,8 @@ gpioe: gpio@40021000 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x1000 0x400>; clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>; st,bank-name = "GPIOE"; @@ -601,6 +628,8 @@ gpiof: gpio@40021400 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x1400 0x400>; clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>; st,bank-name = "GPIOF"; @@ -609,6 +638,8 @@ gpiog: gpio@40021800 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x1800 0x400>; clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>; st,bank-name = "GPIOG"; @@ -617,6 +648,8 @@ gpioh: gpio@40021c00 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x1c00 0x400>; clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>; st,bank-name = "GPIOH"; @@ -625,6 +658,8 @@ gpioi: gpio@40022000 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x2000 0x400>; clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>; st,bank-name = "GPIOI"; @@ -633,6 +668,8 @@ gpioj: gpio@40022400 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x2400 0x400>; clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>; st,bank-name = "GPIOJ"; @@ -641,6 +678,8 @@ gpiok: gpio@40022800 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x2800 0x400>; clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>; st,bank-name = "GPIOK"; @@ -764,6 +803,70 @@ slew-rate = <3>; }; }; + + ltdc_pins: ltdc@0 { + pins { + pinmux = <STM32F429_PI12_FUNC_LCD_HSYNC>, + <STM32F429_PI13_FUNC_LCD_VSYNC>, + <STM32F429_PI14_FUNC_LCD_CLK>, + <STM32F429_PI15_FUNC_LCD_R0>, + <STM32F429_PJ0_FUNC_LCD_R1>, + <STM32F429_PJ1_FUNC_LCD_R2>, + <STM32F429_PJ2_FUNC_LCD_R3>, + <STM32F429_PJ3_FUNC_LCD_R4>, + <STM32F429_PJ4_FUNC_LCD_R5>, + <STM32F429_PJ5_FUNC_LCD_R6>, + <STM32F429_PJ6_FUNC_LCD_R7>, + <STM32F429_PJ7_FUNC_LCD_G0>, + <STM32F429_PJ8_FUNC_LCD_G1>, + <STM32F429_PJ9_FUNC_LCD_G2>, + <STM32F429_PJ10_FUNC_LCD_G3>, + <STM32F429_PJ11_FUNC_LCD_G4>, + <STM32F429_PJ12_FUNC_LCD_B0>, + <STM32F429_PJ13_FUNC_LCD_B1>, + <STM32F429_PJ14_FUNC_LCD_B2>, + <STM32F429_PJ15_FUNC_LCD_B3>, + <STM32F429_PK0_FUNC_LCD_G5>, + <STM32F429_PK1_FUNC_LCD_G6>, + <STM32F429_PK2_FUNC_LCD_G7>, + <STM32F429_PK3_FUNC_LCD_B4>, + <STM32F429_PK4_FUNC_LCD_B5>, + <STM32F429_PK5_FUNC_LCD_B6>, + <STM32F429_PK6_FUNC_LCD_B7>, + <STM32F429_PK7_FUNC_LCD_DE>; + slew-rate = <2>; + }; + }; + + dcmi_pins: dcmi@0 { + pins { + pinmux = <STM32F429_PA4_FUNC_DCMI_HSYNC>, + <STM32F429_PB7_FUNC_DCMI_VSYNC>, + <STM32F429_PA6_FUNC_DCMI_PIXCLK>, + <STM32F429_PC6_FUNC_DCMI_D0>, + <STM32F429_PC7_FUNC_DCMI_D1>, + <STM32F429_PC8_FUNC_DCMI_D2>, + <STM32F429_PC9_FUNC_DCMI_D3>, + <STM32F429_PC11_FUNC_DCMI_D4>, + <STM32F429_PD3_FUNC_DCMI_D5>, + <STM32F429_PB8_FUNC_DCMI_D6>, + <STM32F429_PE6_FUNC_DCMI_D7>, + <STM32F429_PC10_FUNC_DCMI_D8>, + <STM32F429_PC12_FUNC_DCMI_D9>, + <STM32F429_PD6_FUNC_DCMI_D10>, + <STM32F429_PD2_FUNC_DCMI_D11>; + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + }; + }; + + crc: crc@40023000 { + compatible = "st,stm32f4-crc"; + reg = <0x40023000 0x400>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(CRC)>; + status = "disabled"; }; rcc: rcc@40023810 { @@ -842,6 +945,20 @@ status = "disabled"; }; + dcmi: dcmi@50050000 { + compatible = "st,stm32-dcmi"; + reg = <0x50050000 0x400>; + interrupts = <78>; + resets = <&rcc STM32F4_AHB2_RESET(DCMI)>; + clocks = <&rcc 0 STM32F4_AHB2_CLOCK(DCMI)>; + clock-names = "mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&dcmi_pins>; + dmas = <&dma2 1 1 0x414 0x3>; + dma-names = "tx"; + status = "disabled"; + }; + rng: rng@50060800 { compatible = "st,stm32-rng"; reg = <0x50060800 0x400>; diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts new file mode 100644 index 000000000000..18f656074437 --- /dev/null +++ b/arch/arm/boot/dts/stm32f746-disco.dts @@ -0,0 +1,74 @@ +/* + * Copyright 2017 - Vikas MANOCHA <vikas.manocha@st.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "stm32f746.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "STMicroelectronics STM32F746-DISCO board"; + compatible = "st,stm32f746-disco", "st,stm32f746"; + + chosen { + bootargs = "root=/dev/ram"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0xC0000000 0x800000>; + }; + + aliases { + serial0 = &usart1; + }; + +}; + +&clk_hse { + clock-frequency = <25000000>; +}; + +&usart1 { + pinctrl-0 = <&usart1_pins_b>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index c2765ce12e2e..4506eb97a4ab 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -229,6 +229,8 @@ gpioa: gpio@40020000 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x0 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOA)>; st,bank-name = "GPIOA"; @@ -237,6 +239,8 @@ gpiob: gpio@40020400 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x400 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOB)>; st,bank-name = "GPIOB"; @@ -245,6 +249,8 @@ gpioc: gpio@40020800 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x800 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOC)>; st,bank-name = "GPIOC"; @@ -253,6 +259,8 @@ gpiod: gpio@40020c00 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0xc00 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOD)>; st,bank-name = "GPIOD"; @@ -261,6 +269,8 @@ gpioe: gpio@40021000 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x1000 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOE)>; st,bank-name = "GPIOE"; @@ -269,6 +279,8 @@ gpiof: gpio@40021400 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x1400 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOF)>; st,bank-name = "GPIOF"; @@ -277,6 +289,8 @@ gpiog: gpio@40021800 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x1800 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOG)>; st,bank-name = "GPIOG"; @@ -285,6 +299,8 @@ gpioh: gpio@40021c00 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x1c00 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOH)>; st,bank-name = "GPIOH"; @@ -293,6 +309,8 @@ gpioi: gpio@40022000 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x2000 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOI)>; st,bank-name = "GPIOI"; @@ -301,6 +319,8 @@ gpioj: gpio@40022400 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x2400 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOJ)>; st,bank-name = "GPIOJ"; @@ -309,6 +329,8 @@ gpiok: gpio@40022800 { gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x2800 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOK)>; st,bank-name = "GPIOK"; @@ -326,6 +348,19 @@ bias-disable; }; }; + + usart1_pins_b: usart1@1 { + pins1 { + pinmux = <STM32F746_PA9_FUNC_USART1_TX>; + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32F746_PB7_FUNC_USART1_RX>; + bias-disable; + }; + }; }; crc: crc@40023000 { @@ -336,6 +371,7 @@ }; rcc: rcc@40023800 { + #reset-cells = <1>; #clock-cells = <2>; compatible = "st,stm32f746-rcc", "st,stm32-rcc"; reg = <0x40023800 0x400>; diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts new file mode 100644 index 000000000000..166728aeb166 --- /dev/null +++ b/arch/arm/boot/dts/stm32f769-disco.dts @@ -0,0 +1,74 @@ +/* + * Copyright 2017 - Vikas MANOCHA <vikas.manocha@st.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "stm32f746.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "STMicroelectronics STM32F769-DISCO board"; + compatible = "st,stm32f769-disco", "st,stm32f7"; + + chosen { + bootargs = "root=/dev/ram"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0xC0000000 0x1000000>; + }; + + aliases { + serial0 = &usart1; + }; + +}; + +&clk_hse { + clock-frequency = <25000000>; +}; + +&usart1 { + pinctrl-0 = <&usart1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi index fcc1e0640233..76bbd6575fae 100644 --- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi @@ -151,6 +151,19 @@ bias-disable; }; }; + + usart2_pins: usart2@0 { + pins1 { + pinmux = <STM32H7_PD5_FUNC_USART2_TX>; + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32H7_PD6_FUNC_USART2_RX>; + bias-disable; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index 46856298ee16..36a99db0a3b4 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -68,6 +68,14 @@ }; + usart2: serial@40004400 { + compatible = "st,stm32f7-usart", "st,stm32f7-uart"; + reg = <0x40004400 0x400>; + interrupts = <38>; + status = "disabled"; + clocks = <&timer_clk>; + }; + timer5: timer@40000c00 { compatible = "st,stm32-timer"; reg = <0x40000c00 0x400>; diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/stm32h743i-disco.dts new file mode 100644 index 000000000000..79e841d94079 --- /dev/null +++ b/arch/arm/boot/dts/stm32h743i-disco.dts @@ -0,0 +1,73 @@ +/* + * Copyright 2017 - Patrice Chotard <patrice.chotard@st.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "stm32h743.dtsi" +#include "stm32h743-pinctrl.dtsi" + +/ { + model = "STMicroelectronics STM32H743i-Discovery board"; + compatible = "st,stm32h743i-disco", "st,stm32h743"; + + chosen { + bootargs = "root=/dev/ram"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0xd0000000 0x2000000>; + }; + + aliases { + serial0 = &usart2; + }; +}; + +&clk_hse { + clock-frequency = <125000000>; +}; + +&usart2 { + pinctrl-0 = <&usart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index f2a01fe2bebc..f80d37ddc4c6 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -171,7 +171,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts index 942d739a4384..6b02de592a02 100644 --- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts +++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts @@ -109,7 +109,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts index 17f8c5ec011c..a7d61994b8fd 100644 --- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -128,7 +128,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index d844938e2aa7..404ce7694899 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -142,7 +142,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -182,6 +182,10 @@ #include "axp209.dtsi" +&ac_power_supply { + status = "okay"; +}; + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts index aad3bec1cb39..e0777ae808c7 100644 --- a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts +++ b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts @@ -163,7 +163,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts index 9616cdecce93..d8bfd7b74916 100644 --- a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts +++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts @@ -146,7 +146,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH01 */ diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index a1a7282199d5..856cfc9128e6 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -107,7 +107,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts index 85dcf81ab64e..6506595268b2 100644 --- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts +++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts @@ -79,7 +79,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -120,10 +120,6 @@ status = "okay"; }; -&usb2_vbus_pin_a { - pins = "PH6"; -}; - &usb_otg { dr_mode = "otg"; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts index b8923b92cb36..d51d8c302daf 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet1.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts @@ -161,7 +161,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index a1a2bbb3f9d3..a8e479fe43ca 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -147,7 +147,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts index 4a27eb9102cd..2acb89a87d41 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts @@ -305,7 +305,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts index 4e798f014c99..92e3e030ced3 100644 --- a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts +++ b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts @@ -100,7 +100,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts index 308dc1513041..92b2d4af3d21 100644 --- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts +++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts @@ -140,7 +140,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts index 98a5f7258dca..0f927da28ee1 100644 --- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts @@ -141,7 +141,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index 484c57493bd2..a5ed9e4e22c6 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -97,7 +97,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts index 2b75745cd246..81db6824a2c7 100644 --- a/arch/arm/boot/dts/sun4i-a10-mk802.dts +++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts @@ -72,7 +72,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts index c861fa7e356c..e74a881fd9a7 100644 --- a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts +++ b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts @@ -83,7 +83,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index 3a2522a9419d..462412ee903c 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -145,7 +145,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 83596fd2ccfc..84f55e76df0c 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -147,7 +147,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts index a68c7cc53b94..c0f8c88b5a7d 100644 --- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts +++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts @@ -149,7 +149,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index b63668ece151..41c2579143fd 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -1030,12 +1030,6 @@ bias-pull-up; }; - mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { - pins = "PH1"; - function = "gpio_in"; - bias-pull-up; - }; - ps20_pins_a: ps20@0 { pins = "PI20", "PI21"; function = "ps2"; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts index c6f742a7e69f..d2dee8d434bf 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts @@ -136,14 +136,6 @@ status = "okay"; }; -&usb0_vbus_pin_a { - pins = "PG13"; -}; - -&usb1_vbus_pin_a { - pins = "PB10"; -}; - &usb_otg { dr_mode = "host"; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts index a27c3fa58736..16f839df4227 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts @@ -168,10 +168,6 @@ status = "okay"; }; -&usb1_vbus_pin_a { - pins = "PG13"; -}; - &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 894f874a5beb..da95118af4dc 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -63,6 +63,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -76,6 +87,10 @@ }; }; +&be0 { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -91,6 +106,16 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -248,6 +273,10 @@ status = "okay"; }; +&tcon0 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -271,10 +300,6 @@ status = "okay"; }; -&usb0_vbus_pin_a { - pins = "PG11"; -}; - &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>; diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts index ea3e5655a61b..5482be174e12 100644 --- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts +++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts @@ -216,10 +216,6 @@ status = "okay"; }; -&usb1_vbus_pin_a { - pins = "PG12"; -}; - &usbphy { usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 1e38ff80366c..18f25c5e75ae 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -71,7 +71,46 @@ }; }; + display-engine { + compatible = "allwinner,sun5i-a10s-display-engine"; + allwinner,pipelines = <&fe0>; + }; + soc@01c00000 { + hdmi: hdmi@01c16000 { + compatible = "allwinner,sun5i-a10s-hdmi"; + reg = <0x01c16000 0x1000>; + interrupts = <58>; + clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>, + <&ccu 9>, + <&ccu 16>; + clock-names = "ahb", "mod", "pll-0", "pll-1"; + dmas = <&dma SUN4I_DMA_NORMAL 16>, + <&dma SUN4I_DMA_NORMAL 16>, + <&dma SUN4I_DMA_DEDICATED 24>; + dma-names = "ddc-tx", "ddc-rx", "audio-tx"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + + hdmi_in_tcon0: endpoint { + remote-endpoint = <&tcon0_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + pwm: pwm@01c20e00 { compatible = "allwinner,sun5i-a10s-pwm"; reg = <0x01c20e00 0xc>; @@ -128,3 +167,11 @@ &sram_a { }; + +&tcon0_out { + tcon0_out_hdmi: endpoint@2 { + reg = <2>; + remote-endpoint = <&hdmi_in_tcon0>; + allwinner,tcon-channel = <1>; + }; +}; diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts index 34411d27aadf..3dbb0d7c2f8c 100644 --- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts +++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts @@ -207,10 +207,6 @@ status = "okay"; }; -&usb0_vbus_pin_a { - pins = "PG12"; -}; - &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts index 2489c16f7efa..584fa579ded2 100644 --- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -186,7 +186,6 @@ }; ®_usb0_vbus { - pinctrl-0 = <&usb0_vbus_pin_a>; gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ status = "okay"; }; @@ -202,10 +201,6 @@ status = "okay"; }; -&usb0_vbus_pin_a { - pins = "PG12"; -}; - &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 95f591bb8ced..38072c7e10e2 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -269,10 +269,6 @@ status = "okay"; }; -&usb0_vbus_pin_a { - pins = "PG12"; -}; - &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts index d0785602663b..879a4b0f3bd5 100644 --- a/arch/arm/boot/dts/sun5i-r8-chip.dts +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts @@ -132,6 +132,10 @@ status = "okay"; }; +&battery_power_supply { + status = "okay"; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins_a>; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 5175f9cc9bed..98cc00341b00 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -272,6 +272,7 @@ tcon0_out_tve0: endpoint@1 { reg = <1>; remote-endpoint = <&tve0_in_tcon0>; + allwinner,tcon-channel = <1>; }; }; }; @@ -355,6 +356,15 @@ status = "disabled"; }; + crypto: crypto-engine@01c15000 { + compatible = "allwinner,sun5i-a13-crypto", + "allwinner,sun4i-a10-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <54>; + clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>; + clock-names = "ahb", "mod"; + }; + spi2: spi@01c17000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c17000 0x1000>; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index d4f74f476f25..9ecb5f0b3f83 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -253,6 +253,10 @@ #include "axp22x.dtsi" +&ac_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -319,7 +323,6 @@ &tcon0 { pinctrl-names = "default"; pinctrl-0 = <&lcd0_rgb888_pins>; - status = "okay"; }; &tcon0_out { @@ -344,11 +347,6 @@ status = "okay"; }; -&usb1_vbus_pin_a { - /* different pin from sunxi-common-regulators */ - pins = "PH24"; -}; - &usbphy { usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ usb0_vbus_det-gpio = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */ diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 9c999d3788f6..aebc3f9dc7b6 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -232,7 +232,7 @@ de: display-engine { compatible = "allwinner,sun6i-a31-display-engine"; - allwinner,pipelines = <&fe0>; + allwinner,pipelines = <&fe0>, <&fe1>; status = "disabled"; }; @@ -264,7 +264,6 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon0-pixel-clock"; - status = "disabled"; ports { #address-cells = <1>; @@ -289,6 +288,43 @@ }; }; + tcon1: lcd-controller@01c0d000 { + compatible = "allwinner,sun6i-a31-tcon"; + reg = <0x01c0d000 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_AHB1_LCD1>; + reset-names = "lcd"; + clocks = <&ccu CLK_AHB1_LCD1>, + <&ccu CLK_LCD1_CH0>, + <&ccu CLK_LCD1_CH1>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon1-pixel-clock"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon1_in_drc1: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc1_out_tcon1>; + }; + }; + + tcon1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + mmc0: mmc@01c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; @@ -780,7 +816,8 @@ }; crypto: crypto-engine@01c15000 { - compatible = "allwinner,sun4i-a10-crypto"; + compatible = "allwinner,sun6i-a31-crypto", + "allwinner,sun4i-a10-crypto"; reg = <0x01c15000 0x1000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_AHB1_SS>, <&ccu CLK_SS>; @@ -896,6 +933,130 @@ reg = <0>; remote-endpoint = <&be0_in_fe0>; }; + + fe0_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_fe0>; + }; + }; + }; + }; + + fe1: display-frontend@01e20000 { + compatible = "allwinner,sun6i-a31-display-frontend"; + reg = <0x01e20000 0x20000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_FE1>, <&ccu CLK_FE1>, + <&ccu CLK_DRAM_FE1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_FE1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe1_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe1>; + }; + + fe1_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_fe1>; + }; + }; + }; + }; + + be1: display-backend@01e40000 { + compatible = "allwinner,sun6i-a31-display-backend"; + reg = <0x01e40000 0x10000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_BE1>, <&ccu CLK_BE1>, + <&ccu CLK_DRAM_BE1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_BE1>; + + assigned-clocks = <&ccu CLK_BE1>; + assigned-clock-rates = <300000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be1_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be1>; + }; + + be1_in_fe1: endpoint@1 { + reg = <1>; + remote-endpoint = <&fe1_out_be1>; + }; + }; + + be1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be1_out_drc1: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc1_in_be1>; + }; + }; + }; + }; + + drc1: drc@01e50000 { + compatible = "allwinner,sun6i-a31-drc"; + reg = <0x01e50000 0x10000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_DRC1>, <&ccu CLK_IEP_DRC1>, + <&ccu CLK_DRAM_DRC1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_DRC1>; + + assigned-clocks = <&ccu CLK_IEP_DRC1>; + assigned-clock-rates = <300000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + drc1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + drc1_in_be1: endpoint@0 { + reg = <0>; + remote-endpoint = <&be1_out_drc1>; + }; + }; + + drc1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + drc1_out_tcon1: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon1_in_drc1>; + }; }; }; }; @@ -926,6 +1087,11 @@ reg = <0>; remote-endpoint = <&fe0_out_be0>; }; + + be0_in_fe1: endpoint@1 { + reg = <1>; + remote-endpoint = <&fe1_out_be0>; + }; }; be0_out: port@1 { diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index f3712753fa42..4c10123509c4 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -158,11 +158,16 @@ reg = <0x68>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + x-powers,drive-vbus-en; }; }; #include "axp22x.dtsi" +&battery_power_supply { + status = "okay"; +}; + ®_aldo3 { regulator-always-on; regulator-min-microvolt = <2700000>; @@ -226,6 +231,11 @@ regulator-name = "vddio-csi"; }; +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + ®_eldo3 { regulator-min-microvolt = <1080000>; regulator-max-microvolt = <1320000>; @@ -238,12 +248,18 @@ }; &usb_otg { - /* otg support requires support for AXP221 usb-power-supply and GPIO */ - dr_mode = "host"; + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { status = "okay"; }; &usbphy { + usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_dldo1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index bdfdce8ca6ba..51e6f1d21c32 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -138,7 +138,7 @@ non-removable; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&r_pio>; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts index 08e776ae095a..eb55e74232c9 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -144,6 +144,10 @@ #include "axp209.dtsi" +&ac_power_supply { + status = "okay"; +}; + &ir0 { pinctrl-names = "default"; pinctrl-0 = <&ir0_rx_pins_a>; @@ -172,7 +176,7 @@ wakeup-source; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index ed2f35adf542..88a1c2363c6c 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -177,6 +177,57 @@ }; &pio { + gpio-line-names = + /* PA */ + "ERXD3", "ERXD2", "ERXD1", "ERXD0", "ETXD3", + "ETXD2", "ETXD1", "ETXD0", + "ERXCK", "ERXERR", "ERXDV", "EMDC", "EMDIO", + "ETXEN", "ETXCK", "ECRS", + "ECOL", "ETXERR", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* PB */ + "PMU-SCK", "PMU-SDA", "", "", "", "", "", "", + "", "USB0-DRV", "", "", "", "", "", "", + "", "", "", "", "SCL", "SDA", "", "", + "", "", "", "", "", "", "", "", + /* PC */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* PD */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* PE */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* PF */ + "SD0-D1", "SD0-D0", "SD0-CLK", "SD0-CMD", "SD0-D3", + "SD0-D2", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* PG */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* PH */ + "TXD0", "RXD0", "IO-1", "PH3", "USB0-IDDET", "PH5", "", "", + "", "", "SD0-DET", "", "", "", "", "", + "", "", "", "", "IO-4", "IO-5", "", "EMAC-PWR-EN", + "LED1", "", "", "", "", "", "", "", + /* PI */ + "", "", "", "IO-GCLK", "", "", "", "", + "", "", "SPI-CE0", "SPI-CLK", "SPI-MOSI", + "SPI-MISO", "SPI-CE1", "", + "IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "", + "", "", "", "", "", "", "", ""; + usb0_id_detect_pin: usb0_id_detect_pin@0 { pins = "PH4"; function = "gpio_in"; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts index 83516bc81225..e7af1b7c33d5 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts @@ -172,7 +172,7 @@ non-removable; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index a2eab7aa80e0..2a50207618cb 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -137,7 +137,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -174,13 +174,12 @@ status = "okay"; }; -&usb_otg { - dr_mode = "otg"; +#include "axp209.dtsi" + +&ac_power_supply { status = "okay"; }; -#include "axp209.dtsi" - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -220,6 +219,11 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 102903e83bd2..bb510187602c 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -178,7 +178,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -195,7 +195,7 @@ non-removable; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; @@ -336,6 +336,7 @@ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */ usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ + usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts index 99c00b9a1546..6e6264cd69f8 100644 --- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts @@ -160,7 +160,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index 4da49717da21..55809973a568 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -157,7 +157,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -173,7 +173,7 @@ non-removable; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts index 28d3abbdc2d4..794e7617f545 100644 --- a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts +++ b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts @@ -104,7 +104,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 8 5 GPIO_ACTIVE_HIGH>; /* PI5 */ diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts index d52222c82cb8..8a8a6dbcd414 100644 --- a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts +++ b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts @@ -121,7 +121,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts index 96bb0bc198ba..004b6ddac813 100644 --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -85,10 +85,6 @@ }; }; -&ahci_pwr_pin_a { - pins = "PB3"; -}; - &ahci { target-supply = <®_ahci_5v>; status = "okay"; @@ -319,10 +315,6 @@ status = "okay"; }; -&usb2_vbus_pin_a { - pins = "PH12"; -}; - &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>; diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts index 86f69813683e..43c94787ef07 100644 --- a/arch/arm/boot/dts/sun7i-a20-m3.dts +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -117,7 +117,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts index c4ee30709f3a..f7413094183c 100644 --- a/arch/arm/boot/dts/sun7i-a20-mk808c.dts +++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts @@ -109,7 +109,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts index 1af5b46862cb..64c8ef9a2756 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts @@ -187,7 +187,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index dcd0f7a0dffa..2ce1a9f13a17 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -130,7 +130,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index e7d45425758c..097bd755764c 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -131,7 +131,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index def0ad8395bb..0b7403e4d687 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -198,7 +198,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index f47a5c46bc20..39bc73db72e5 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -130,7 +130,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index 7c96b53b76bf..777152a3df0f 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -106,10 +106,6 @@ status = "okay"; }; -&ahci_pwr_pin_a { - pins = "PH2"; -}; - &codec { status = "okay"; }; @@ -160,7 +156,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts index e19f17177755..f8d0aafb9f88 100644 --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts @@ -151,7 +151,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts index c3078d4f1093..7f8405a0dd0f 100644 --- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts +++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts @@ -120,7 +120,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ @@ -137,7 +137,7 @@ non-removable; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 93aa55970bd7..96bee776e145 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -1019,7 +1019,8 @@ }; crypto: crypto-engine@01c15000 { - compatible = "allwinner,sun4i-a10-crypto"; + compatible = "allwinner,sun7i-a20-crypto", + "allwinner,sun4i-a10-crypto"; reg = <0x01c15000 0x1000>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb_gates 5>, <&ss_clk>; @@ -1190,12 +1191,6 @@ bias-pull-up; }; - mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { - pins = "PH1"; - function = "gpio_in"; - bias-pull-up; - }; - mmc2_pins_a: mmc2@0 { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11"; diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts index 9b620cc1d5f1..433cf2a2a9a2 100644 --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -88,13 +88,13 @@ }; &cpu0_opp_table { - opp@1104000000 { + opp-1104000000 { opp-hz = /bits/ 64 <1104000000>; opp-microvolt = <1320000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1320000>; clock-latency-ns = <244144>; /* 8 32k periods */ @@ -196,6 +196,10 @@ status = "okay"; }; +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <3000000>; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 013978259372..22660919bd08 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -50,73 +50,73 @@ compatible = "operating-points-v2"; opp-shared; - opp@120000000 { + opp-120000000 { opp-hz = /bits/ 64 <120000000>; opp-microvolt = <1040000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@240000000 { + opp-240000000 { opp-hz = /bits/ 64 <240000000>; opp-microvolt = <1040000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@312000000 { + opp-312000000 { opp-hz = /bits/ 64 <312000000>; opp-microvolt = <1040000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@408000000 { + opp-408000000 { opp-hz = /bits/ 64 <408000000>; opp-microvolt = <1040000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@480000000 { + opp-480000000 { opp-hz = /bits/ 64 <480000000>; opp-microvolt = <1040000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@504000000 { + opp-504000000 { opp-hz = /bits/ 64 <504000000>; opp-microvolt = <1040000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <1040000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@648000000 { + opp-648000000 { opp-hz = /bits/ 64 <648000000>; opp-microvolt = <1040000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@720000000 { + opp-720000000 { opp-hz = /bits/ 64 <720000000>; opp-microvolt = <1100000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@816000000 { + opp-816000000 { opp-hz = /bits/ 64 <816000000>; opp-microvolt = <1100000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@912000000 { + opp-912000000 { opp-hz = /bits/ 64 <912000000>; opp-microvolt = <1200000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@1008000000 { + opp-1008000000 { opp-hz = /bits/ 64 <1008000000>; opp-microvolt = <1200000>; clock-latency-ns = <244144>; /* 8 32k periods */ @@ -164,15 +164,15 @@ mali_opp_table: gpu-opp-table { compatible = "operating-points-v2"; - opp@144000000 { + opp-144000000 { opp-hz = /bits/ 64 <144000000>; }; - opp@240000000 { + opp-240000000 { opp-hz = /bits/ 64 <240000000>; }; - opp@384000000 { + opp-384000000 { opp-hz = /bits/ 64 <384000000>; }; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts index 342e1d33fa1c..aecdeeb368ed 100644 --- a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts +++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts @@ -59,6 +59,6 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_b>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index 88b1e0970b8d..cff33454fc24 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -45,6 +45,8 @@ /dts-v1/; #include "sun8i-a83t.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Cubietech Cubietruck Plus"; compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t"; @@ -56,10 +58,56 @@ chosen { stdout-path = "serial0:115200n8"; }; + + leds { + compatible = "gpio-leds"; + + blue { + label = "cubietruck-plus:blue:usr"; + gpios = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */ + }; + + orange { + label = "cubietruck-plus:orange:usr"; + gpios = <&pio 3 26 GPIO_ACTIVE_HIGH>; /* PD26 */ + }; + + white { + label = "cubietruck-plus:white:usr"; + gpios = <&pio 3 27 GPIO_ACTIVE_HIGH>; /* PD27 */ + }; + + green { + label = "cubietruck-plus:green:usr"; + gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */ + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; +}; + +&spdif { + status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_b>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 0ec143773ee9..8923ba625b76 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -40,15 +40,22 @@ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. - */ -#include "skeleton.dtsi" - #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/sun8i-r-ccu.h> + / { interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + }; + + chosen { + }; cpus { #address-cells = <1>; @@ -121,6 +128,7 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; + clock-accuracy = <50000>; clock-output-names = "osc24M"; }; @@ -146,25 +154,55 @@ }; }; + memory { + reg = <0x40000000 0x80000000>; + device_type = "memory"; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - pio: pinctrl@01c20800 { + syscon: syscon@1c00000 { + compatible = "allwinner,sun8i-a83t-system-controller", + "syscon"; + reg = <0x01c00000 0x1000>; + }; + + dma: dma-controller@1c02000 { + compatible = "allwinner,sun8i-a83t-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu 21>; + resets = <&ccu 7>; + #dma-cells = <1>; + }; + + ccu: clock@1c20000 { + compatible = "allwinner,sun8i-a83t-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc16Md512>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pio: pinctrl@1c20800 { compatible = "allwinner,sun8i-a83t-pinctrl"; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; reg = <0x01c20800 0x400>; - clocks = <&osc24M>; + clocks = <&ccu 45>, <&osc24M>, <&osc16Md512>; + clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; #gpio-cells = <3>; - mmc0_pins_a: mmc0@0 { + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -172,18 +210,23 @@ bias-pull-up; }; - uart0_pins_a: uart0@0 { - pins = "PF2", "PF4"; - function = "uart0"; + spdif_tx_pin: spdif-tx-pin { + pins = "PE18"; + function = "spdif"; }; - uart0_pins_b: uart0@1 { + uart0_pb_pins: uart0-pb-pins { pins = "PB9", "PB10"; function = "uart0"; }; + + uart0_pf_pins: uart0-pf-pins { + pins = "PF2", "PF4"; + function = "uart0"; + }; }; - timer@01c20c00 { + timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0xa0>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, @@ -191,24 +234,41 @@ clocks = <&osc24M>; }; - watchdog@01c20ca0 { + watchdog@1c20ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&osc24M>; }; + spdif: spdif@1c21000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-a83t-spdif", + "allwinner,sun8i-h3-spdif"; + reg = <0x01c21000 0x400>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu 44>, <&ccu 76>; + resets = <&ccu 32>; + clock-names = "apb", "spdif"; + dmas = <&dma 2>; + dma-names = "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pin>; + status = "disabled"; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&osc24M>; + clocks = <&ccu 53>; + resets = <&ccu 40>; status = "disabled"; }; - gic: interrupt-controller@01c81000 { + gic: interrupt-controller@1c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, @@ -218,5 +278,28 @@ #interrupt-cells = <3>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; }; + + r_ccu: clock@1f01400 { + compatible = "allwinner,sun8i-a83t-r-ccu"; + reg = <0x01f01400 0x400>; + clocks = <&osc24M>, <&osc16Md512>, <&osc16M>, + <&ccu 6>; + clock-names = "hosc", "losc", "iosc", "pll-periph"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + r_pio: pinctrl@1f02c00 { + compatible = "allwinner,sun8i-a83t-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, + <&osc16Md512>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + }; }; }; diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts index 9e8b082c134f..6713d0f2b3f4 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts @@ -57,6 +57,7 @@ aliases { serial0 = &uart0; /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ + ethernet0 = &emac; ethernet1 = &xr819; }; @@ -103,6 +104,13 @@ status = "okay"; }; +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>; @@ -143,6 +151,19 @@ status = "okay"; }; +&spi0 { + /* Disable SPI NOR by default: it optional on Orange Pi Zero boards */ + status = "disabled"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mxicy,mx25l1606e", "winbond,w25q128"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts index 52acbe111cad..d756ff825116 100644 --- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts @@ -52,6 +52,7 @@ compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3"; aliases { + ethernet0 = &emac; serial0 = &uart0; serial1 = &uart1; }; @@ -84,6 +85,16 @@ }; }; + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; @@ -92,6 +103,10 @@ }; }; +&ehci0 { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -100,12 +115,30 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + + allwinner,leds-active-low; + status = "okay"; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; status = "okay"; }; +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; @@ -126,7 +159,7 @@ non-removable; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; @@ -145,6 +178,10 @@ status = "okay"; }; +&ohci0 { + status = "okay"; +}; + &ohci1 { status = "okay"; }; @@ -170,6 +207,11 @@ }; }; +®_usb0_vbus { + gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */ + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -182,7 +224,14 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { - /* USB VBUS is on as long as VCC-IO is on */ + usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + usb0_vbus-supply = <®_usb0_vbus>; + /* USB host VBUS is on as long as VCC-IO is on */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts new file mode 100644 index 000000000000..8ddd1b2cc097 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2017 Jagan Teki <jteki@openedev.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun8i-h3-nanopi.dtsi" + +/ { + model = "FriendlyArm NanoPi M1 Plus"; + compatible = "friendlyarm,nanopi-m1-plus", "allwinner,sun8i-h3"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts index 8d2cc6e9a03f..78f6c24952dd 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts @@ -46,3 +46,10 @@ model = "FriendlyARM NanoPi NEO"; compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3"; }; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts index 5b6d14555b7c..17cdeae19c6f 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts @@ -54,6 +54,7 @@ aliases { serial0 = &uart0; /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ + ethernet0 = &emac; ethernet1 = &rtl8189; }; @@ -104,10 +105,26 @@ }; }; +&codec { + allwinner,pa-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */ + allwinner,audio-routing = + "Speaker", "LINEOUT", + "MIC1", "Mic", + "Mic", "MBIAS"; + status = "okay"; +}; + &ehci1 { status = "okay"; }; +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; @@ -195,10 +212,6 @@ status = "disabled"; }; -&usb1_vbus_pin_a { - pins = "PG13"; -}; - &usbphy { usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts index 5fea430e0eb1..6880268e8b87 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts @@ -52,6 +52,7 @@ compatible = "xunlong,orangepi-one", "allwinner,sun8i-h3"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -97,6 +98,13 @@ status = "okay"; }; +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts index 8b93f5c781a7..a10281b455f5 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts @@ -53,6 +53,11 @@ }; }; +&emac { + /* LEDs changed to active high on the plus */ + /delete-property/ allwinner,leds-active-low; +}; + &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins_a>; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts index f148111c326d..998b60f8d295 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts @@ -52,6 +52,7 @@ compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -97,6 +98,10 @@ status = "okay"; }; +&ehci0 { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -109,6 +114,13 @@ status = "okay"; }; +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; @@ -125,6 +137,10 @@ status = "okay"; }; +&ohci0 { + status = "okay"; +}; + &ohci1 { status = "okay"; }; @@ -156,6 +172,11 @@ }; }; +®_usb0_vbus { + gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -180,7 +201,14 @@ status = "disabled"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { - /* USB VBUS is always on */ + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_vbus-supply = <®_usb0_vbus>; + /* VBUS on USB host ports are always on */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index 8c40ab7bfa72..331ed683ac62 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -47,6 +47,20 @@ model = "Xunlong Orange Pi Plus / Plus 2"; compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3"; + aliases { + ethernet0 = &emac; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + }; + reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -64,6 +78,24 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + + allwinner,leds-active-low; + status = "okay"; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_pins>; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts index 5851a47a3089..80026f3caafc 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts @@ -50,4 +50,30 @@ / { model = "Xunlong Orange Pi Plus 2E"; compatible = "xunlong,orangepi-plus2e", "allwinner,sun8i-h3"; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ + }; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; }; diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts new file mode 100644 index 000000000000..d1311098ea45 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun8i-v3s-licheepi-zero.dts" + +#include <dt-bindings/input/input.h> + +/ { + model = "Lichee Pi Zero with Dock"; + compatible = "licheepi,licheepi-zero-dock", "licheepi,licheepi-zero", + "allwinner,sun8i-v3s"; + + leds { + /* The LEDs use PG0~2 pins, which conflict with MMC1 */ + status = "disbaled"; + }; +}; + +&mmc1 { + broken-cd; + bus-width = <4>; + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; + + button@600 { + label = "Select"; + linux,code = <KEY_SELECT>; + channel = <0>; + voltage = <600000>; + }; + + button@800 { + label = "Start"; + linux,code = <KEY_OK>; + channel = <0>; + voltage = <800000>; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index 71075969e5e6..3a06dc5b3746 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -41,6 +41,8 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/sun8i-v3s-ccu.h> +#include <dt-bindings/reset/sun8i-v3s-ccu.h> / { #address-cells = <1>; @@ -55,10 +57,16 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; - clocks = <&ccu 14>; + clocks = <&ccu CLK_CPU>; }; }; + de: display-engine { + compatible = "allwinner,sun8i-v3s-display-engine"; + allwinner,pipelines = <&mixer0>; + status = "disabled"; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -93,18 +101,95 @@ #size-cells = <1>; ranges; + display_clocks: clock@1000000 { + compatible = "allwinner,sun8i-v3s-de2-clk"; + reg = <0x01000000 0x100000>; + clocks = <&ccu CLK_DE>, + <&ccu CLK_BUS_DE>; + clock-names = "mod", + "bus"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + mixer0: mixer@1100000 { + compatible = "allwinner,sun8i-v3s-de2-mixer"; + reg = <0x01100000 0x100000>; + clocks = <&display_clocks 0>, + <&display_clocks 6>; + clock-names = "bus", + "mod"; + resets = <&display_clocks 0>; + assigned-clocks = <&display_clocks 6>; + assigned-clock-rates = <150000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + mixer0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_mixer0>; + }; + }; + }; + }; + + tcon0: lcd-controller@1c0c000 { + compatible = "allwinner,sun8i-v3s-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON0>, + <&ccu CLK_TCON0>; + clock-names = "ahb", + "tcon-ch0"; + clock-output-names = "tcon-pixel-clock"; + resets = <&ccu RST_BUS_TCON0>; + reset-names = "lcd"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mixer0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + + mmc0: mmc@01c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&ccu 22>, - <&ccu 45>, - <&ccu 47>, - <&ccu 46>; + clocks = <&ccu CLK_BUS_MMC0>, + <&ccu CLK_MMC0>, + <&ccu CLK_MMC0_OUTPUT>, + <&ccu CLK_MMC0_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ccu 7>; + resets = <&ccu RST_BUS_MMC0>; reset-names = "ahb"; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -115,17 +200,19 @@ mmc1: mmc@01c10000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&ccu 23>, - <&ccu 48>, - <&ccu 50>, - <&ccu 49>; + clocks = <&ccu CLK_BUS_MMC1>, + <&ccu CLK_MMC1>, + <&ccu CLK_MMC1_OUTPUT>, + <&ccu CLK_MMC1_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ccu 8>; + resets = <&ccu RST_BUS_MMC1>; reset-names = "ahb"; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -134,15 +221,15 @@ mmc2: mmc@01c11000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&ccu 24>, - <&ccu 51>, - <&ccu 53>, - <&ccu 52>; + clocks = <&ccu CLK_BUS_MMC2>, + <&ccu CLK_MMC2>, + <&ccu CLK_MMC2_OUTPUT>, + <&ccu CLK_MMC2_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ccu 9>; + resets = <&ccu RST_BUS_MMC2>; reset-names = "ahb"; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -153,8 +240,8 @@ usb_otg: usb@01c19000 { compatible = "allwinner,sun8i-h3-musb"; reg = <0x01c19000 0x0400>; - clocks = <&ccu 29>; - resets = <&ccu 17>; + clocks = <&ccu CLK_BUS_OTG>; + resets = <&ccu RST_BUS_OTG>; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "mc"; phys = <&usbphy 0>; @@ -169,9 +256,9 @@ <0x01c1a800 0x4>; reg-names = "phy_ctrl", "pmu0"; - clocks = <&ccu 56>; + clocks = <&ccu CLK_USB_PHY0>; clock-names = "usb0_phy"; - resets = <&ccu 0>; + resets = <&ccu RST_USB_PHY0>; reset-names = "usb0_reset"; status = "disabled"; #phy-cells = <1>; @@ -198,7 +285,7 @@ reg = <0x01c20800 0x400>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu 37>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; @@ -222,6 +309,19 @@ drive-strength = <30>; bias-pull-up; }; + + mmc1_pins: mmc1 { + pins = "PG0", "PG1", "PG2", "PG3", + "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; + }; + + spi0_pins: spi0 { + pins = "PC0", "PC1", "PC2", "PC3"; + function = "spi0"; + }; }; timer@01c20c00 { @@ -238,14 +338,21 @@ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; }; + lradc: lradc@1c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x400>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 40>; - resets = <&ccu 49>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; @@ -255,8 +362,8 @@ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 41>; - resets = <&ccu 50>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; status = "disabled"; }; @@ -266,8 +373,8 @@ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 42>; - resets = <&ccu 51>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; status = "disabled"; }; @@ -275,8 +382,8 @@ compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu 38>; - resets = <&ccu 46>; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; status = "disabled"; @@ -288,8 +395,22 @@ compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b000 0x400>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu 39>; - resets = <&ccu 47>; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi0: spi@1c68000 { + compatible = "allwinner,sun8i-h3-spi"; + reg = <0x01c68000 0x1000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; + clock-names = "ahb", "mod"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + resets = <&ccu RST_BUS_SPI0>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index ce5c53e4452f..d8e5826fb3de 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -44,33 +44,9 @@ #include <dt-bindings/gpio/gpio.h> -&pio { - ahci_pwr_pin_a: ahci_pwr_pin@0 { - pins = "PB8"; - function = "gpio_out"; - }; - - usb0_vbus_pin_a: usb0_vbus_pin@0 { - pins = "PB9"; - function = "gpio_out"; - }; - - usb1_vbus_pin_a: usb1_vbus_pin@0 { - pins = "PH6"; - function = "gpio_out"; - }; - - usb2_vbus_pin_a: usb2_vbus_pin@0 { - pins = "PH3"; - function = "gpio_out"; - }; -}; - / { reg_ahci_5v: ahci-5v { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&ahci_pwr_pin_a>; regulator-name = "ahci-5v"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -82,8 +58,6 @@ reg_usb0_vbus: usb0-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&usb0_vbus_pin_a>; regulator-name = "usb0-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -94,8 +68,6 @@ reg_usb1_vbus: usb1-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin_a>; regulator-name = "usb1-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -107,8 +79,6 @@ reg_usb2_vbus: usb2-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&usb2_vbus_pin_a>; regulator-name = "usb2-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 1aeeacb3a884..6f2162608006 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -41,8 +41,10 @@ */ #include <dt-bindings/clock/sun8i-h3-ccu.h> +#include <dt-bindings/clock/sun8i-r-ccu.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/sun8i-h3-ccu.h> +#include <dt-bindings/reset/sun8i-r-ccu.h> / { interrupt-parent = <&gic>; @@ -83,6 +85,12 @@ #size-cells = <1>; ranges; + syscon: syscon@1c00000 { + compatible = "allwinner,sun8i-h3-system-controller", + "syscon"; + reg = <0x01c00000 0x1000>; + }; + dma: dma-controller@01c02000 { compatible = "allwinner,sun8i-h3-dma"; reg = <0x01c02000 0x1000>; @@ -279,6 +287,14 @@ interrupt-controller; #interrupt-cells = <3>; + emac_rgmii_pins: emac0 { + pins = "PD0", "PD1", "PD2", "PD3", "PD4", + "PD5", "PD7", "PD8", "PD9", "PD10", + "PD12", "PD13", "PD15", "PD16", "PD17"; + function = "emac"; + drive-strength = <40>; + }; + i2c0_pins: i2c0 { pins = "PA11", "PA12"; function = "i2c0"; @@ -375,6 +391,32 @@ clocks = <&osc24M>; }; + emac: ethernet@1c30000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c30000 0x104>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + int_mii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + clocks = <&ccu CLK_BUS_EPHY>; + resets = <&ccu RST_BUS_EPHY>; + }; + }; + }; + spi0: spi@01c68000 { compatible = "allwinner,sun8i-h3-spi"; reg = <0x01c68000 0x1000>; @@ -558,10 +600,11 @@ }; r_ccu: clock@1f01400 { - compatible = "allwinner,sun50i-a64-r-ccu"; + compatible = "allwinner,sun8i-h3-r-ccu"; reg = <0x01f01400 0x100>; - clocks = <&osc24M>, <&osc32k>, <&iosc>; - clock-names = "hosc", "losc", "iosc"; + clocks = <&osc24M>, <&osc32k>, <&iosc>, + <&ccu 9>; + clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; #reset-cells = <1>; }; @@ -573,9 +616,9 @@ ir: ir@01f02000 { compatible = "allwinner,sun5i-a13-ir"; - clocks = <&r_ccu 4>, <&r_ccu 11>; + clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>; clock-names = "apb", "ir"; - resets = <&r_ccu 0>; + resets = <&r_ccu RST_APB0_IR>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; reg = <0x01f02000 0x40>; status = "disabled"; @@ -585,7 +628,7 @@ compatible = "allwinner,sun8i-h3-r-pinctrl"; reg = <0x01f02c00 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>; + clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts index 5b860ad5cbee..ecffcd115fa7 100644 --- a/arch/arm/boot/dts/tegra124-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts @@ -63,7 +63,7 @@ stdout-path = "serial0:115200n8"; }; - pcie-controller@01003000 { + pcie@1003000 { pci@1,0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi index f9e623bdd5c3..5d9b18ef5af6 100644 --- a/arch/arm/boot/dts/tegra124-apalis.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis.dtsi @@ -54,7 +54,7 @@ reg = <0x0 0x80000000 0x0 0x80000000>; }; - pcie-controller@01003000 { + pcie@1003000 { status = "okay"; avddio-pex-supply = <&vdd_1v05>; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 53994f9fbbcc..7bacb2954f58 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -27,7 +27,7 @@ reg = <0x0 0x80000000 0x0 0x80000000>; }; - pcie-controller@01003000 { + pcie@1003000 { status = "okay"; avddio-pex-supply = <&vdd_1v05_run>; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 187a36c6d0fc..1b10b14a6abd 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -14,7 +14,7 @@ #address-cells = <2>; #size-cells = <2>; - pcie-controller@01003000 { + pcie@1003000 { compatible = "nvidia,tegra124-pcie"; device_type = "pci"; reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ @@ -54,6 +54,7 @@ device_type = "pci"; assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>; reg = <0x000800 0 0 0 0>; + bus-range = <0x00 0xff>; status = "disabled"; #address-cells = <3>; @@ -67,6 +68,7 @@ device_type = "pci"; assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>; reg = <0x001000 0 0 0 0>; + bus-range = <0x00 0xff>; status = "disabled"; #address-cells = <3>; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index d4fb4d39ede7..41749693ec3c 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -566,7 +566,7 @@ nvidia,sys-clock-req-active-high; }; - pcie-controller@80003000 { + pcie@80003000 { status = "okay"; avdd-pex-supply = <&pci_vdd_reg>; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 27d2bbbf1eae..7361f4a82e80 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -478,7 +478,7 @@ nvidia,sys-clock-req-active-high; }; - pcie-controller@80003000 { + pcie@80003000 { avdd-pex-supply = <&pci_vdd_reg>; vdd-pex-supply = <&pci_vdd_reg>; avdd-pex-pll-supply = <&pci_vdd_reg>; diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts index c12d8bead2ee..9cb534f4441e 100644 --- a/arch/arm/boot/dts/tegra20-tec.dts +++ b/arch/arm/boot/dts/tegra20-tec.dts @@ -32,7 +32,7 @@ }; }; - pcie-controller@80003000 { + pcie@80003000 { status = "okay"; pci@1,0 { diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 87b07fbadbbe..b902ab594afa 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -321,7 +321,7 @@ nvidia,sys-clock-req-active-high; }; - pcie-controller@80003000 { + pcie@80003000 { status = "okay"; avdd-pex-supply = <&pci_vdd_reg>; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts deleted file mode 100644 index 1e06f854c8b4..000000000000 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ /dev/null @@ -1,636 +0,0 @@ -/dts-v1/; - -#include <dt-bindings/input/input.h> -#include "tegra20.dtsi" - -/ { - model = "NVIDIA Tegra20 Whistler evaluation board"; - compatible = "nvidia,whistler", "nvidia,tegra20"; - - aliases { - rtc0 = "/i2c@7000d000/max8907@3c"; - rtc1 = "/rtc@7000e000"; - serial0 = &uarta; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory { - reg = <0x00000000 0x20000000>; - }; - - host1x@50000000 { - hdmi@54280000 { - status = "okay"; - - vdd-supply = <&hdmi_vdd_reg>; - pll-supply = <&hdmi_pll_reg>; - - nvidia,ddc-i2c-bus = <&hdmi_ddc>; - nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) - GPIO_ACTIVE_HIGH>; - }; - }; - - pinmux@70000014 { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - ata { - nvidia,pins = "ata", "atb", "ate", "gma", "gmb", - "gmc", "gmd", "gpu"; - nvidia,function = "gmi"; - }; - atc { - nvidia,pins = "atc", "atd"; - nvidia,function = "sdio4"; - }; - cdev1 { - nvidia,pins = "cdev1"; - nvidia,function = "plla_out"; - }; - cdev2 { - nvidia,pins = "cdev2"; - nvidia,function = "osc"; - }; - crtp { - nvidia,pins = "crtp"; - nvidia,function = "crt"; - }; - csus { - nvidia,pins = "csus"; - nvidia,function = "vi_sensor_clk"; - }; - dap1 { - nvidia,pins = "dap1"; - nvidia,function = "dap1"; - }; - dap2 { - nvidia,pins = "dap2"; - nvidia,function = "dap2"; - }; - dap3 { - nvidia,pins = "dap3"; - nvidia,function = "dap3"; - }; - dap4 { - nvidia,pins = "dap4"; - nvidia,function = "dap4"; - }; - ddc { - nvidia,pins = "ddc"; - nvidia,function = "i2c2"; - }; - dta { - nvidia,pins = "dta", "dtb", "dtc", "dtd"; - nvidia,function = "vi"; - }; - dte { - nvidia,pins = "dte"; - nvidia,function = "rsvd1"; - }; - dtf { - nvidia,pins = "dtf"; - nvidia,function = "i2c3"; - }; - gme { - nvidia,pins = "gme"; - nvidia,function = "dap5"; - }; - gpu7 { - nvidia,pins = "gpu7"; - nvidia,function = "rtck"; - }; - gpv { - nvidia,pins = "gpv"; - nvidia,function = "pcie"; - }; - hdint { - nvidia,pins = "hdint", "pta"; - nvidia,function = "hdmi"; - }; - i2cp { - nvidia,pins = "i2cp"; - nvidia,function = "i2cp"; - }; - irrx { - nvidia,pins = "irrx", "irtx"; - nvidia,function = "uartb"; - }; - kbca { - nvidia,pins = "kbca", "kbcc", "kbce", "kbcf"; - nvidia,function = "kbc"; - }; - kbcb { - nvidia,pins = "kbcb", "kbcd"; - nvidia,function = "sdio2"; - }; - lcsn { - nvidia,pins = "lcsn", "lsck", "lsda", "lsdi", - "spia", "spib", "spic"; - nvidia,function = "spi3"; - }; - ld0 { - nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", - "ld5", "ld6", "ld7", "ld8", "ld9", - "ld10", "ld11", "ld12", "ld13", "ld14", - "ld15", "ld16", "ld17", "ldc", "ldi", - "lhp0", "lhp1", "lhp2", "lhs", "lm0", - "lm1", "lpp", "lpw0", "lpw1", "lpw2", - "lsc0", "lsc1", "lspi", "lvp0", "lvp1", - "lvs"; - nvidia,function = "displaya"; - }; - owc { - nvidia,pins = "owc", "uac"; - nvidia,function = "owr"; - }; - pmc { - nvidia,pins = "pmc"; - nvidia,function = "pwr_on"; - }; - rm { - nvidia,pins = "rm"; - nvidia,function = "i2c1"; - }; - sdb { - nvidia,pins = "sdb", "sdc", "sdd", "slxa", - "slxc", "slxd", "slxk"; - nvidia,function = "sdio3"; - }; - sdio1 { - nvidia,pins = "sdio1"; - nvidia,function = "sdio1"; - }; - spdi { - nvidia,pins = "spdi", "spdo"; - nvidia,function = "rsvd2"; - }; - spid { - nvidia,pins = "spid", "spie", "spig", "spih"; - nvidia,function = "spi2_alt"; - }; - spif { - nvidia,pins = "spif"; - nvidia,function = "spi2"; - }; - uaa { - nvidia,pins = "uaa", "uab"; - nvidia,function = "uarta"; - }; - uad { - nvidia,pins = "uad"; - nvidia,function = "irda"; - }; - uca { - nvidia,pins = "uca", "ucb"; - nvidia,function = "uartc"; - }; - uda { - nvidia,pins = "uda"; - nvidia,function = "spi1"; - }; - conf_ata { - nvidia,pins = "ata", "atb", "atc", "ddc", "gma", - "gmb", "gmc", "gmd", "irrx", "irtx", - "kbca", "kbcb", "kbcc", "kbcd", "kbce", - "kbcf", "sdc", "sdd", "spie", "spig", - "spih", "uaa", "uab", "uad", "uca", - "ucb"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - }; - conf_atd { - nvidia,pins = "atd", "ate", "cdev1", "csus", - "dap1", "dap2", "dap3", "dap4", "dte", - "dtf", "gpu", "gpu7", "gpv", "i2cp", - "rm", "sdio1", "slxa", "slxc", "slxd", - "slxk", "spdi", "spdo", "uac", "uda"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - }; - conf_cdev2 { - nvidia,pins = "cdev2", "spia", "spib"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - }; - conf_ck32 { - nvidia,pins = "ck32", "ddrc", "lc", "pmca", - "pmcb", "pmcc", "pmcd", "xm2c", - "xm2d"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - }; - conf_crtp { - nvidia,pins = "crtp"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - }; - conf_dta { - nvidia,pins = "dta", "dtb", "dtc", "dtd", - "spid", "spif"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - }; - conf_gme { - nvidia,pins = "gme", "owc", "pta", "spic"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - }; - conf_ld17_0 { - nvidia,pins = "ld17_0", "ld19_18", "ld21_20", - "ld23_22"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - }; - conf_ls { - nvidia,pins = "ls", "pmce"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - }; - drive_dap1 { - nvidia,pins = "drive_dap1"; - nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>; - nvidia,schmitt = <TEGRA_PIN_ENABLE>; - nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_8>; - nvidia,pull-down-strength = <0>; - nvidia,pull-up-strength = <0>; - nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; - nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; - }; - }; - }; - - i2s@70002800 { - status = "okay"; - }; - - serial@70006000 { - status = "okay"; - }; - - hdmi_ddc: i2c@7000c400 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000d000 { - status = "okay"; - clock-frequency = <100000>; - - codec: codec@1a { - compatible = "wlf,wm8753"; - reg = <0x1a>; - }; - - tca6416: gpio@20 { - compatible = "ti,tca6416"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - }; - - max8907@3c { - compatible = "maxim,max8907"; - reg = <0x3c>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - - maxim,system-power-controller; - - mbatt-supply = <&usb0_vbus_reg>; - in-v1-supply = <&mbatt_reg>; - in-v2-supply = <&mbatt_reg>; - in-v3-supply = <&mbatt_reg>; - in1-supply = <&mbatt_reg>; - in2-supply = <&nvvdd_sv3_reg>; - in3-supply = <&mbatt_reg>; - in4-supply = <&mbatt_reg>; - in5-supply = <&mbatt_reg>; - in6-supply = <&mbatt_reg>; - in7-supply = <&mbatt_reg>; - in8-supply = <&mbatt_reg>; - in9-supply = <&mbatt_reg>; - in10-supply = <&mbatt_reg>; - in11-supply = <&mbatt_reg>; - in12-supply = <&mbatt_reg>; - in13-supply = <&mbatt_reg>; - in14-supply = <&mbatt_reg>; - in15-supply = <&mbatt_reg>; - in16-supply = <&mbatt_reg>; - in17-supply = <&nvvdd_sv3_reg>; - in18-supply = <&nvvdd_sv3_reg>; - in19-supply = <&mbatt_reg>; - in20-supply = <&mbatt_reg>; - - regulators { - mbatt_reg: mbatt { - regulator-name = "vbat_pmu"; - regulator-always-on; - }; - - sd1 { - regulator-name = "nvvdd_sv1,vdd_cpu_pmu"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - sd2 { - regulator-name = "nvvdd_sv2,vdd_core"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - nvvdd_sv3_reg: sd3 { - regulator-name = "nvvdd_sv3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo1 { - regulator-name = "nvvdd_ldo1,vddio_rx_ddr,vcore_acc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - ldo2 { - regulator-name = "nvvdd_ldo2,avdd_pll*"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo3 { - regulator-name = "nvvdd_ldo3,vcom_1v8b"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo4 { - regulator-name = "nvvdd_ldo4,avdd_usb*"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - ldo5 { - regulator-name = "nvvdd_ldo5,vcore_mmc,avdd_lcd1,vddio_1wire"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - hdmi_pll_reg: ldo6 { - regulator-name = "nvvdd_ldo6,avdd_hdmi_pll"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo7 { - regulator-name = "nvvdd_ldo7,avddio_audio"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo8 { - regulator-name = "nvvdd_ldo8,vcom_3v0,vcore_cmps"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo9 { - regulator-name = "nvvdd_ldo9,avdd_cam*"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo10 { - regulator-name = "nvvdd_ldo10,avdd_usb_ic_3v0"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - hdmi_vdd_reg: ldo11 { - regulator-name = "nvvdd_ldo11,vddio_pex_clk,vcom_33,avdd_hdmi"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo12 { - regulator-name = "nvvdd_ldo12,vddio_sdio"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo13 { - regulator-name = "nvvdd_ldo13,vcore_phtn,vdd_af"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo14 { - regulator-name = "nvvdd_ldo14,avdd_vdac"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo15 { - regulator-name = "nvvdd_ldo15,vcore_temp,vddio_hdcp"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo16 { - regulator-name = "nvvdd_ldo16,vdd_dbrtr"; - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - ldo17 { - regulator-name = "nvvdd_ldo17,vddio_mipi"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo18 { - regulator-name = "nvvdd_ldo18,vddio_vi,vcore_cam*"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo19 { - regulator-name = "nvvdd_ldo19,avdd_lcd2,vddio_lx"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo20 { - regulator-name = "nvvdd_ldo20,vddio_ddr_1v2,vddio_hsic,vcom_1v2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - out5v { - regulator-name = "usb0_vbus_reg"; - }; - - out33v { - regulator-name = "pmu_out3v3"; - }; - - bbat { - regulator-name = "pmu_bbat"; - regulator-min-microvolt = <2400000>; - regulator-max-microvolt = <2400000>; - regulator-always-on; - }; - - sdby { - regulator-name = "vdd_aon"; - regulator-always-on; - }; - - vrtc { - regulator-name = "vrtc,pmu_vccadc"; - regulator-always-on; - }; - }; - }; - }; - - kbc@7000e200 { - status = "okay"; - nvidia,debounce-delay-ms = <20>; - nvidia,repeat-delay-ms = <160>; - nvidia,kbc-row-pins = <0 1 2>; - nvidia,kbc-col-pins = <16 17>; - wakeup-source; - linux,keymap = <MATRIX_KEY(0x00, 0x00, KEY_POWER) - MATRIX_KEY(0x01, 0x00, KEY_HOME) - MATRIX_KEY(0x01, 0x01, KEY_BACK) - MATRIX_KEY(0x02, 0x01, KEY_MENU)>; - }; - - pmc@7000e400 { - nvidia,invert-interrupt; - nvidia,suspend-mode = <1>; - nvidia,cpu-pwr-good-time = <2000>; - nvidia,cpu-pwr-off-time = <1000>; - nvidia,core-pwr-good-time = <0 3845>; - nvidia,core-pwr-off-time = <93727>; - nvidia,core-power-req-active-high; - nvidia,sys-clock-req-active-high; - nvidia,combined-power-req; - }; - - usb@c5000000 { - status = "okay"; - }; - - usb-phy@c5000000 { - status = "okay"; - vbus-supply = <&vbus1_reg>; - }; - - usb@c5008000 { - status = "okay"; - }; - - usb-phy@c5008000 { - status = "okay"; - vbus-supply = <&vbus3_reg>; - }; - - sdhci@c8000400 { - status = "okay"; - cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>; - bus-width = <8>; - }; - - sdhci@c8000600 { - status = "okay"; - bus-width = <8>; - non-removable; - }; - - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - usb0_vbus_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb0_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vbus1_reg: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "vbus1"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&tca6416 0 0>; /* GPIO_PMU0 */ - regulator-always-on; - regulator-boot-on; - }; - - vbus3_reg: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "vbus3"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&tca6416 1 0>; /* GPIO_PMU1 */ - regulator-always-on; - regulator-boot-on; - }; - }; - - sound { - compatible = "nvidia,tegra-audio-wm8753-whistler", - "nvidia,tegra-audio-wm8753"; - nvidia,model = "NVIDIA Tegra Whistler"; - - nvidia,audio-routing = - "Headphone Jack", "LOUT1", - "Headphone Jack", "ROUT1", - "MIC2", "Mic Jack", - "MIC2N", "Mic Jack"; - - nvidia,i2s-controller = <&tegra_i2s1>; - nvidia,audio-codec = <&codec>; - - clocks = <&tegra_car TEGRA20_CLK_PLL_A>, - <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA20_CLK_CDEV1>; - clock-names = "pll_a", "pll_a_out0", "mclk"; - }; -}; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index e8807503f87c..7c85f97f72ea 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -586,7 +586,7 @@ reset-names = "fuse"; }; - pcie-controller@80003000 { + pcie@80003000 { compatible = "nvidia,tegra20-pcie"; device_type = "pci"; reg = <0x80003000 0x00000800 /* PADS registers */ @@ -625,6 +625,7 @@ device_type = "pci"; assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>; reg = <0x000800 0 0 0 0>; + bus-range = <0x00 0xff>; status = "disabled"; #address-cells = <3>; @@ -638,6 +639,7 @@ device_type = "pci"; assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>; reg = <0x001000 0 0 0 0>; + bus-range = <0x00 0xff>; status = "disabled"; #address-cells = <3>; diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts index 99a69457dbf5..fc530e4a96c4 100644 --- a/arch/arm/boot/dts/tegra30-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts @@ -21,7 +21,7 @@ stdout-path = "serial0:115200n8"; }; - pcie-controller@00003000 { + pcie@3000 { status = "okay"; pci@1,0 { diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index f6c7c3e958ac..7a6a1a014603 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -9,7 +9,7 @@ model = "Toradex Apalis T30"; compatible = "toradex,apalis_t30", "nvidia,tegra30"; - pcie-controller@00003000 { + pcie@3000 { avdd-pexa-supply = <&vdd2_reg>; vdd-pexa-supply = <&vdd2_reg>; avdd-pexb-supply = <&vdd2_reg>; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 0350002849d5..4f41b18d9547 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -20,7 +20,7 @@ reg = <0x80000000 0x7ff00000>; }; - pcie-controller@00003000 { + pcie@3000 { status = "okay"; avdd-pexa-supply = <&ldo1_reg>; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index f11012bb58cc..83dc14a9b353 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -43,7 +43,7 @@ reg = <0x80000000 0x40000000>; }; - pcie-controller@00003000 { + pcie@3000 { status = "okay"; /* AVDD_PEXA and VDD_PEXA inputs are grounded on Cardhu. */ diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index bbb1c002e7f1..13960fda7471 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -10,7 +10,7 @@ compatible = "nvidia,tegra30"; interrupt-parent = <&lic>; - pcie-controller@00003000 { + pcie@3000 { compatible = "nvidia,tegra30-pcie"; device_type = "pci"; reg = <0x00003000 0x00000800 /* PADS registers */ @@ -51,6 +51,7 @@ device_type = "pci"; assigned-addresses = <0x82000800 0 0x00000000 0 0x1000>; reg = <0x000800 0 0 0 0>; + bus-range = <0x00 0xff>; status = "disabled"; #address-cells = <3>; @@ -64,6 +65,7 @@ device_type = "pci"; assigned-addresses = <0x82001000 0 0x00001000 0 0x1000>; reg = <0x001000 0 0 0 0>; + bus-range = <0x00 0xff>; status = "disabled"; #address-cells = <3>; @@ -77,6 +79,7 @@ device_type = "pci"; assigned-addresses = <0x82001800 0 0x00004000 0 0x1000>; reg = <0x001800 0 0 0 0>; + bus-range = <0x00 0xff>; status = "disabled"; #address-cells = <3>; diff --git a/arch/arm/boot/dts/tny_a9260_common.dtsi b/arch/arm/boot/dts/tny_a9260_common.dtsi index f9dc463b9e48..5d83df4675a1 100644 --- a/arch/arm/boot/dts/tny_a9260_common.dtsi +++ b/arch/arm/boot/dts/tny_a9260_common.dtsi @@ -32,50 +32,69 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; + ebi: ebi@10000000 { status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x20000>; - }; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; - barebox@20000 { - label = "barebox"; - reg = <0x20000 0x40000>; - }; + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; - bareboxenv@60000 { - label = "bareboxenv"; - reg = <0x60000 0x20000>; - }; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; - bareboxenv2@80000 { - label = "bareboxenv2"; - reg = <0x80000 0x20000>; - }; + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; - oftree@80000 { - label = "oftree"; - reg = <0xa0000 0x20000>; - }; + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; - kernel@a0000 { - label = "kernel"; - reg = <0xc0000 0x400000>; - }; + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x20000>; + }; - rootfs@4a0000 { - label = "rootfs"; - reg = <0x4c0000 0x7800000>; - }; + bareboxenv2@80000 { + label = "bareboxenv2"; + reg = <0x80000 0x20000>; + }; + + oftree@80000 { + label = "oftree"; + reg = <0xa0000 0x20000>; + }; + + kernel@a0000 { + label = "kernel"; + reg = <0xc0000 0x400000>; + }; + + rootfs@4a0000 { + label = "rootfs"; + reg = <0x4c0000 0x7800000>; + }; - data@7ca0000 { - label = "data"; - reg = <0x7cc0000 0x8340000>; + data@7ca0000 { + label = "data"; + reg = <0x7cc0000 0x8340000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts index 9161cd9889b4..8cf0a9e08571 100644 --- a/arch/arm/boot/dts/tny_a9263.dts +++ b/arch/arm/boot/dts/tny_a9263.dts @@ -42,50 +42,69 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; + ebi0: ebi@10000000 { status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x20000>; - }; - - barebox@20000 { - label = "barebox"; - reg = <0x20000 0x40000>; - }; - - bareboxenv@60000 { - label = "bareboxenv"; - reg = <0x60000 0x20000>; - }; - - bareboxenv2@80000 { - label = "bareboxenv2"; - reg = <0x80000 0x20000>; - }; - - oftree@80000 { - label = "oftree"; - reg = <0xa0000 0x20000>; - }; - - kernel@a0000 { - label = "kernel"; - reg = <0xc0000 0x400000>; - }; - - rootfs@4a0000 { - label = "rootfs"; - reg = <0x4c0000 0x7800000>; - }; - - data@7ca0000 { - label = "data"; - reg = <0x7cc0000 0x8340000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x20000>; + }; + + bareboxenv2@80000 { + label = "bareboxenv2"; + reg = <0x80000 0x20000>; + }; + + oftree@80000 { + label = "oftree"; + reg = <0xa0000 0x20000>; + }; + + kernel@a0000 { + label = "kernel"; + reg = <0xc0000 0x400000>; + }; + + rootfs@4a0000 { + label = "rootfs"; + reg = <0x4c0000 0x7800000>; + }; + + data@7ca0000 { + label = "data"; + reg = <0x7cc0000 0x8340000>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index 36ae9160b558..16533b62b0a2 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -23,6 +23,8 @@ compatible = "ti,twl4030-bci"; interrupts = <9>, <2>; bci3v1-supply = <&vusb3v1>; + io-channels = <&twl_madc 11>; + io-channel-names = "vac"; }; watchdog { diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts index e0da4ee21c21..4817ebb28eb2 100644 --- a/arch/arm/boot/dts/uniphier-ld4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi index 4f5fe15eaee2..fb2fd9605b9d 100644 --- a/arch/arm/boot/dts/uniphier-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ld4.dtsi @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ / { @@ -201,7 +165,7 @@ pinctrl-0 = <&pinctrl_system_bus>; }; - smpctrl@59800000 { + smpctrl@59801000 { compatible = "socionext,uniphier-smpctrl"; reg = <0x59801000 0x400>; }; diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts index a397a8811c78..96db4abc02c3 100644 --- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm/boot/dts/uniphier-ld6b.dtsi b/arch/arm/boot/dts/uniphier-ld6b.dtsi index 905c77d499eb..8b9a79731bd3 100644 --- a/arch/arm/boot/dts/uniphier-ld6b.dtsi +++ b/arch/arm/boot/dts/uniphier-ld6b.dtsi @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* diff --git a/arch/arm/boot/dts/uniphier-pro4-ace.dts b/arch/arm/boot/dts/uniphier-pro4-ace.dts index fefc89149234..11690b57931c 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ace.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ace.dts @@ -4,43 +4,7 @@ * Copyright (C) 2016 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; @@ -88,7 +52,7 @@ status = "okay"; eeprom@54 { - compatible = "st,24c64"; + compatible = "st,24c64", "atmel,24c64"; reg = <0x54>; pagesize = <32>; }; diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts index 6077e634d14a..4cf539245f2e 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm/boot/dts/uniphier-pro4-sanji.dts b/arch/arm/boot/dts/uniphier-pro4-sanji.dts index 6c63c8bad825..2763cebcd76a 100644 --- a/arch/arm/boot/dts/uniphier-pro4-sanji.dts +++ b/arch/arm/boot/dts/uniphier-pro4-sanji.dts @@ -4,43 +4,7 @@ * Copyright (C) 2016 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; @@ -83,7 +47,7 @@ status = "okay"; eeprom@54 { - compatible = "st,24c64"; + compatible = "st,24c64", "atmel,24c64"; reg = <0x54>; pagesize = <32>; }; diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index 794a85a7068b..37400becf4ba 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ / { @@ -233,7 +197,7 @@ pinctrl-0 = <&pinctrl_system_bus>; }; - smpctrl@59800000 { + smpctrl@59801000 { compatible = "socionext,uniphier-smpctrl"; reg = <0x59801000 0x400>; }; diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index df07b555cbed..9577769a0add 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -77,67 +77,67 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; clock-latency-ns = <300>; }; - opp@116667000 { + opp-116667000 { opp-hz = /bits/ 64 <116667000>; clock-latency-ns = <300>; }; - opp@150000000 { + opp-150000000 { opp-hz = /bits/ 64 <150000000>; clock-latency-ns = <300>; }; - opp@175000000 { + opp-175000000 { opp-hz = /bits/ 64 <175000000>; clock-latency-ns = <300>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; clock-latency-ns = <300>; }; - opp@233334000 { + opp-233334000 { opp-hz = /bits/ 64 <233334000>; clock-latency-ns = <300>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; clock-latency-ns = <300>; }; - opp@350000000 { + opp-350000000 { opp-hz = /bits/ 64 <350000000>; clock-latency-ns = <300>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; clock-latency-ns = <300>; }; - opp@466667000 { + opp-466667000 { opp-hz = /bits/ 64 <466667000>; clock-latency-ns = <300>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; clock-latency-ns = <300>; }; - opp@700000000 { + opp-700000000 { opp-hz = /bits/ 64 <700000000>; clock-latency-ns = <300>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; clock-latency-ns = <300>; }; - opp@933334000 { + opp-933334000 { opp-hz = /bits/ 64 <933334000>; clock-latency-ns = <300>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; clock-latency-ns = <300>; }; - opp@1400000000 { + opp-1400000000 { opp-hz = /bits/ 64 <1400000000>; clock-latency-ns = <300>; }; @@ -320,7 +320,7 @@ pinctrl-0 = <&pinctrl_system_bus>; }; - smpctrl@59800000 { + smpctrl@59801000 { compatible = "socionext,uniphier-smpctrl"; reg = <0x59801000 0x400>; }; diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts index cccc86658d20..81560f75bfa7 100644 --- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; @@ -80,7 +44,7 @@ status = "okay"; eeprom@54 { - compatible = "st,24c64"; + compatible = "st,24c64", "atmel,24c64"; reg = <0x54>; pagesize = <32>; }; diff --git a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts index 803a39aa39d0..dc2d0579c666 100644 --- a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index 58c3e2f35706..bace751d4023 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ / { @@ -97,35 +61,35 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; clock-latency-ns = <300>; }; - opp@150000000 { + opp-150000000 { opp-hz = /bits/ 64 <150000000>; clock-latency-ns = <300>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; clock-latency-ns = <300>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; clock-latency-ns = <300>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; clock-latency-ns = <300>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; clock-latency-ns = <300>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; clock-latency-ns = <300>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; clock-latency-ns = <300>; }; @@ -304,7 +268,7 @@ pinctrl-0 = <&pinctrl_system_bus>; }; - smpctrl@59800000 { + smpctrl@59801000 { compatible = "socionext,uniphier-smpctrl"; reg = <0x59801000 0x400>; }; diff --git a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi index c62ae1a81f47..7a1c29b558d5 100644 --- a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi +++ b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi @@ -4,43 +4,7 @@ * Copyright (C) 2015-2017 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ &i2c0 { diff --git a/arch/arm/boot/dts/uniphier-sld3-ref.dts b/arch/arm/boot/dts/uniphier-sld3-ref.dts index eb63dcca92b5..70cda39a3dd2 100644 --- a/arch/arm/boot/dts/uniphier-sld3-ref.dts +++ b/arch/arm/boot/dts/uniphier-sld3-ref.dts @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm/boot/dts/uniphier-sld3.dtsi b/arch/arm/boot/dts/uniphier-sld3.dtsi index 01d77edac01f..408287936613 100644 --- a/arch/arm/boot/dts/uniphier-sld3.dtsi +++ b/arch/arm/boot/dts/uniphier-sld3.dtsi @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ / { @@ -216,7 +180,7 @@ #size-cells = <1>; }; - smpctrl@59800000 { + smpctrl@59801000 { compatible = "socionext,uniphier-smpctrl"; reg = <0x59801000 0x400>; }; diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts index 737d276349fd..4536d5b71297 100644 --- a/arch/arm/boot/dts/uniphier-sld8-ref.dts +++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi index eb06fdc04b02..9fb9167f2db4 100644 --- a/arch/arm/boot/dts/uniphier-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-sld8.dtsi @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ / { @@ -201,7 +165,7 @@ pinctrl-0 = <&pinctrl_system_bus>; }; - smpctrl@59800000 { + smpctrl@59801000 { compatible = "socionext,uniphier-smpctrl"; reg = <0x59801000 0x400>; }; diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi index f61dfec2807f..6c825f192e65 100644 --- a/arch/arm/boot/dts/uniphier-support-card.dtsi +++ b/arch/arm/boot/dts/uniphier-support-card.dtsi @@ -4,43 +4,7 @@ * Copyright (C) 2015-2017 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ &system_bus { @@ -53,14 +17,14 @@ #size-cells = <1>; ranges = <0x00000000 1 0x01f00000 0x00100000>; - ethsc: ethernet@00000000 { + ethsc: ethernet@0 { compatible = "smsc,lan9118", "smsc,lan9115"; reg = <0x00000000 0x1000>; phy-mode = "mii"; reg-io-width = <4>; }; - serialsc: uart@000b0000 { + serialsc: uart@b0000 { compatible = "ns16550a"; reg = <0x000b0000 0x20>; clock-frequency = <12288000>; diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi index 7514b347cdd2..34a49995eda3 100644 --- a/arch/arm/boot/dts/usb_a9260_common.dtsi +++ b/arch/arm/boot/dts/usb_a9260_common.dtsi @@ -34,50 +34,69 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; + ebi: ebi@10000000 { status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x20000>; - }; - - barebox@20000 { - label = "barebox"; - reg = <0x20000 0x40000>; - }; - - bareboxenv@60000 { - label = "bareboxenv"; - reg = <0x60000 0x20000>; - }; - - bareboxenv2@80000 { - label = "bareboxenv2"; - reg = <0x80000 0x20000>; - }; - - oftree@80000 { - label = "oftree"; - reg = <0xa0000 0x20000>; - }; - - kernel@a0000 { - label = "kernel"; - reg = <0xc0000 0x400000>; - }; - - rootfs@4a0000 { - label = "rootfs"; - reg = <0x4c0000 0x7800000>; - }; - - data@7ca0000 { - label = "data"; - reg = <0x7cc0000 0x8340000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x20000>; + }; + + bareboxenv2@80000 { + label = "bareboxenv2"; + reg = <0x80000 0x20000>; + }; + + oftree@80000 { + label = "oftree"; + reg = <0xa0000 0x20000>; + }; + + kernel@a0000 { + label = "kernel"; + reg = <0xc0000 0x400000>; + }; + + rootfs@4a0000 { + label = "rootfs"; + reg = <0x4c0000 0x7800000>; + }; + + data@7ca0000 { + label = "data"; + reg = <0x7cc0000 0x8340000>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts index bfc48a272417..482381c1c962 100644 --- a/arch/arm/boot/dts/usb_a9263.dts +++ b/arch/arm/boot/dts/usb_a9263.dts @@ -62,50 +62,69 @@ }; }; - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; + ebi0: ebi@10000000 { status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x20000>; - }; - - barebox@20000 { - label = "barebox"; - reg = <0x20000 0x40000>; - }; - - bareboxenv@60000 { - label = "bareboxenv"; - reg = <0x60000 0x20000>; - }; - - bareboxenv2@80000 { - label = "bareboxenv2"; - reg = <0x80000 0x20000>; - }; - - oftree@80000 { - label = "oftree"; - reg = <0xa0000 0x20000>; - }; - - kernel@a0000 { - label = "kernel"; - reg = <0xc0000 0x400000>; - }; - - rootfs@4a0000 { - label = "rootfs"; - reg = <0x4c0000 0x7800000>; - }; - - data@7ca0000 { - label = "data"; - reg = <0x7cc0000 0x8340000>; + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x20000>; + }; + + bareboxenv2@80000 { + label = "bareboxenv2"; + reg = <0x80000 0x20000>; + }; + + oftree@80000 { + label = "oftree"; + reg = <0xa0000 0x20000>; + }; + + kernel@a0000 { + label = "kernel"; + reg = <0xc0000 0x400000>; + }; + + rootfs@4a0000 { + label = "rootfs"; + reg = <0x4c0000 0x7800000>; + }; + + data@7ca0000 { + label = "data"; + reg = <0x7cc0000 0x8340000>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts index 33a8eb28374e..06e2331f666d 100644 --- a/arch/arm/boot/dts/versatile-pb.dts +++ b/arch/arm/boot/dts/versatile-pb.dts @@ -1,4 +1,4 @@ -#include <versatile-ab.dts> +#include "versatile-ab.dts" / { model = "ARM Versatile PB"; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index 37f95427616f..acdf12ad0622 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -78,6 +78,7 @@ interrupts = <27 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; + eeprom-length = <512>; ports { #address-cells = <1>; @@ -163,6 +164,7 @@ interrupts = <26 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; + eeprom-length = <512>; ports { #address-cells = <1>; diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 9b1b7be2ec0e..9a92de63426f 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -33,6 +33,7 @@ #include <linux/scatterlist.h> #include <asm/cacheflush.h> +#include <asm/dma-iommu.h> #undef STATS @@ -256,7 +257,7 @@ static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size, if (buf == NULL) { dev_err(dev, "%s: unable to map unsafe buffer %p!\n", __func__, ptr); - return DMA_ERROR_CODE; + return ARM_MAPPING_ERROR; } dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n", @@ -326,7 +327,7 @@ static dma_addr_t dmabounce_map_page(struct device *dev, struct page *page, ret = needs_bounce(dev, dma_addr, size); if (ret < 0) - return DMA_ERROR_CODE; + return ARM_MAPPING_ERROR; if (ret == 0) { arm_dma_ops.sync_single_for_device(dev, dma_addr, size, dir); @@ -335,7 +336,7 @@ static dma_addr_t dmabounce_map_page(struct device *dev, struct page *page, if (PageHighMem(page)) { dev_err(dev, "DMA buffer bouncing of HIGHMEM pages is not supported\n"); - return DMA_ERROR_CODE; + return ARM_MAPPING_ERROR; } return map_single(dev, page_address(page) + offset, size, dir, attrs); @@ -444,12 +445,17 @@ static void dmabounce_sync_for_device(struct device *dev, arm_dma_ops.sync_single_for_device(dev, handle, size, dir); } -static int dmabounce_set_mask(struct device *dev, u64 dma_mask) +static int dmabounce_dma_supported(struct device *dev, u64 dma_mask) { if (dev->archdata.dmabounce) return 0; - return arm_dma_ops.set_dma_mask(dev, dma_mask); + return arm_dma_ops.dma_supported(dev, dma_mask); +} + +static int dmabounce_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return arm_dma_ops.mapping_error(dev, dma_addr); } static const struct dma_map_ops dmabounce_ops = { @@ -465,7 +471,8 @@ static const struct dma_map_ops dmabounce_ops = { .unmap_sg = arm_dma_unmap_sg, .sync_sg_for_cpu = arm_dma_sync_sg_for_cpu, .sync_sg_for_device = arm_dma_sync_sg_for_device, - .set_dma_mask = dmabounce_set_mask, + .dma_supported = dmabounce_dma_supported, + .mapping_error = dmabounce_mapping_error, }; static int dmabounce_init_pool(struct dmabounce_pool *pool, struct device *dev, diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c index cf062472e07b..2b913f17d50f 100644 --- a/arch/arm/common/mcpm_entry.c +++ b/arch/arm/common/mcpm_entry.c @@ -235,7 +235,7 @@ int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster) return ret; } -typedef void (*phys_reset_t)(unsigned long); +typedef typeof(cpu_reset) phys_reset_t; void mcpm_cpu_power_down(void) { @@ -300,7 +300,7 @@ void mcpm_cpu_power_down(void) * on the CPU. */ phys_reset = (phys_reset_t)(unsigned long)__pa_symbol(cpu_reset); - phys_reset(__pa_symbol(mcpm_entry_point)); + phys_reset(__pa_symbol(mcpm_entry_point), false); /* should never get here */ BUG(); @@ -389,7 +389,7 @@ static int __init nocache_trampoline(unsigned long _arg) __mcpm_cpu_down(cpu, cluster); phys_reset = (phys_reset_t)(unsigned long)__pa_symbol(cpu_reset); - phys_reset(__pa_symbol(mcpm_entry_point)); + phys_reset(__pa_symbol(mcpm_entry_point), false); BUG(); } diff --git a/arch/arm/configs/acs5k_defconfig b/arch/arm/configs/acs5k_defconfig index 92b0f90d1515..d04ee19e5b75 100644 --- a/arch/arm/configs/acs5k_defconfig +++ b/arch/arm/configs/acs5k_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -30,13 +29,9 @@ CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_JEDECPROBE=y @@ -49,8 +44,6 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_ARM_KS8695_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set CONFIG_PRISM54=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set # CONFIG_INPUT_KEYBOARD is not set @@ -69,7 +62,6 @@ CONFIG_KS8695_WATCHDOG=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PCF8563=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_SUMMARY=y diff --git a/arch/arm/configs/acs5k_tiny_defconfig b/arch/arm/configs/acs5k_tiny_defconfig index 2a27a147463f..25c593df41d1 100644 --- a/arch/arm/configs/acs5k_tiny_defconfig +++ b/arch/arm/configs/acs5k_tiny_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -25,13 +24,9 @@ CONFIG_INET=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_JEDECPROBE=y @@ -40,12 +35,9 @@ CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP=y # CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_ARM_KS8695_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set @@ -62,11 +54,9 @@ CONFIG_GPIO_PCA953X=y CONFIG_WATCHDOG=y CONFIG_KS8695_WATCHDOG=y # CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PCF8563=y -CONFIG_INOTIFY=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_SUMMARY=y diff --git a/arch/arm/configs/am200epdkit_defconfig b/arch/arm/configs/am200epdkit_defconfig index 113a5d815060..8c9b6ea46188 100644 --- a/arch/arm/configs/am200epdkit_defconfig +++ b/arch/arm/configs/am200epdkit_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="gum" # CONFIG_SWAP is not set CONFIG_SYSVIPC=y @@ -30,12 +29,9 @@ CONFIG_INET=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m @@ -43,7 +39,6 @@ CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y @@ -88,7 +83,6 @@ CONFIG_USB_ETH=m CONFIG_MMC=y CONFIG_MMC_PXA=y # CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y CONFIG_VFAT_FS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_COMPRESSION_OPTIONS=y @@ -101,7 +95,6 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_CRYPTO=y CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_ECB=m diff --git a/arch/arm/configs/assabet_defconfig b/arch/arm/configs/assabet_defconfig index ab19ff1a0b71..04c86ff558da 100644 --- a/arch/arm/configs/assabet_defconfig +++ b/arch/arm/configs/assabet_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y @@ -22,9 +21,7 @@ CONFIG_IRDA=m CONFIG_IRLAN=m CONFIG_SA1100_FIR=m CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y diff --git a/arch/arm/configs/axm55xx_defconfig b/arch/arm/configs/axm55xx_defconfig index d3260d7d5af1..8e17e7ed1f02 100644 --- a/arch/arm/configs/axm55xx_defconfig +++ b/arch/arm/configs/axm55xx_defconfig @@ -74,7 +74,6 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_AH=y CONFIG_INET_ESP=y CONFIG_INET_IPCOMP=y -# CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_NETWORK_PHY_TIMESTAMPING=y CONFIG_BRIDGE=y diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig index 2a604aa3195b..5ae5b5228467 100644 --- a/arch/arm/configs/badge4_defconfig +++ b/arch/arm/configs/badge4_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_EXPERT=y CONFIG_MODULES=y @@ -23,14 +22,11 @@ CONFIG_IRCOMM=y CONFIG_IRDA_ULTRA=y CONFIG_SA1100_FIR=y CONFIG_BT=m -CONFIG_BT_L2CAP=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIVHCI=m # CONFIG_FW_LOADER is not set CONFIG_MTD=y CONFIG_MTD_DEBUG=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y @@ -113,5 +109,4 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index 3ba8cd3211f8..3ee9d78c412a 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -24,6 +24,8 @@ CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_JUMP_LABEL=y CONFIG_CC_STACKPROTECTOR_REGULAR=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_MULTI_V6=y CONFIG_ARCH_BCM=y CONFIG_ARCH_BCM2835=y @@ -86,8 +88,14 @@ CONFIG_SND=y CONFIG_SND_SOC=y CONFIG_SND_BCM2835_SOC_I2S=y CONFIG_USB=y +CONFIG_USB_OTG=y CONFIG_USB_STORAGE=y CONFIG_USB_DWC2=y +CONFIG_NOP_USB_XCEIV=y +CONFIG_USB_GADGET=y +CONFIG_USB_ETH=m +CONFIG_USB_ETH_EEM=y +CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig index 57a2a18690b1..3f910bbf1bfd 100644 --- a/arch/arm/configs/cerfcube_defconfig +++ b/arch/arm/configs/cerfcube_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_LOG_BUF_SHIFT=14 @@ -29,10 +28,8 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y # CONFIG_IPV6 is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=m CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y @@ -70,5 +67,4 @@ CONFIG_NLS_ISO8859_1=m CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/cm_x2xx_defconfig b/arch/arm/configs/cm_x2xx_defconfig index 3b32d5fd9326..fb45b4983d3c 100644 --- a/arch/arm/configs/cm_x2xx_defconfig +++ b/arch/arm/configs/cm_x2xx_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y CONFIG_IKCONFIG=y @@ -39,12 +38,9 @@ CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_BNEP=m CONFIG_BT_HIDP=m @@ -53,7 +49,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_FW_LOADER=m CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_JEDECPROBE=y @@ -69,7 +64,6 @@ CONFIG_MTD_NAND_CM_X270=y CONFIG_MTD_NAND_PLATFORM=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_ATA=m @@ -82,8 +76,6 @@ CONFIG_DM9000_DEBUGLEVEL=1 CONFIG_NET_PCI=y CONFIG_8139TOO=m # CONFIG_8139TOO_PIO is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set CONFIG_PPP=m CONFIG_PPP_MULTILINK=y CONFIG_PPP_FILTER=y @@ -144,7 +136,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y @@ -160,7 +151,6 @@ CONFIG_RTC_DRV_V3020=y CONFIG_RTC_DRV_PXA=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y -CONFIG_INOTIFY=y CONFIG_VFAT_FS=m # CONFIG_PROC_PAGE_MONITOR is not set CONFIG_TMPFS=y @@ -179,10 +169,7 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig index 7df040e91c1c..c0418e03d180 100644 --- a/arch/arm/configs/cm_x300_defconfig +++ b/arch/arm/configs/cm_x300_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-cm-x300" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y @@ -35,12 +34,9 @@ CONFIG_IP_PNP_RARP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set CONFIG_BT=m -CONFIG_BT_L2CAP=y -CONFIG_BT_SCO=y CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m @@ -51,8 +47,6 @@ CONFIG_BT_HCIBTUSB=m CONFIG_LIB80211=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_PXA3xx=y @@ -66,8 +60,6 @@ CONFIG_NET_ETHERNET=y CONFIG_DM9000=y CONFIG_DM9000_DEBUGLEVEL=0 CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set @@ -129,7 +121,6 @@ CONFIG_HID_TOPSEED=y CONFIG_HID_THRUSTMASTER=y CONFIG_HID_ZEROPLUS=y CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y @@ -165,7 +156,6 @@ CONFIG_NLS_ISO8859_1=m CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/cns3420vb_defconfig b/arch/arm/configs/cns3420vb_defconfig index b1ff5cdba9a1..63a953d855a6 100644 --- a/arch/arm/configs/cns3420vb_defconfig +++ b/arch/arm/configs/cns3420vb_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y @@ -31,9 +30,7 @@ CONFIG_CMDLINE="console=ttyS0,38400 mem=128M root=/dev/mmcblk0p1 ro rootwait" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_AMDSTD=y @@ -41,7 +38,6 @@ CONFIG_MTD_PHYSMAP=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=20000 -# CONFIG_MISC_DEVICES is not set CONFIG_BLK_DEV_SD=y CONFIG_ATA=y # CONFIG_SATA_PMP is not set @@ -56,20 +52,17 @@ CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set # CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y -CONFIG_INOTIFY=y CONFIG_AUTOFS4_FS=y CONFIG_FSCACHE=y CONFIG_TMPFS=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_DEBUG_FS=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_ARM_UNWIND is not set CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig index 3146ad055716..8995695fc118 100644 --- a/arch/arm/configs/colibri_pxa270_defconfig +++ b/arch/arm/configs/colibri_pxa270_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y @@ -32,10 +31,8 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_NETFILTER=y -CONFIG_IP_NF_QUEUE=m CONFIG_VLAN_8021Q=m CONFIG_IRDA=m CONFIG_IRLAN=m @@ -45,8 +42,6 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y CONFIG_IRDA_FAST_RR=y CONFIG_IRTTY_SIR=m CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m @@ -57,8 +52,6 @@ CONFIG_CFG80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_CONNECTOR=y CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_JEDECPROBE=y @@ -87,8 +80,6 @@ CONFIG_NETDEVICES=y CONFIG_PHYLIB=y CONFIG_NET_ETHERNET=y CONFIG_DM9000=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set CONFIG_HOSTAP=y CONFIG_HOSTAP_FIRMWARE=y CONFIG_HOSTAP_FIRMWARE_NVRAM=y @@ -123,7 +114,6 @@ CONFIG_FONT_8x16=y CONFIG_LOGO=y # CONFIG_USB_HID is not set CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_SERIAL=m CONFIG_USB_GADGET=m CONFIG_USB_GADGET_DUMMY_HCD=y @@ -132,7 +122,6 @@ CONFIG_NEW_LEDS=y CONFIG_RTC_CLASS=y # CONFIG_RTC_HCTOSYS is not set CONFIG_RTC_DRV_PCF8583=m -CONFIG_INOTIFY=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m @@ -160,9 +149,7 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y CONFIG_KEYS=y CONFIG_SECURITY=y diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig index be02fe2b14cb..d282e8b0bf33 100644 --- a/arch/arm/configs/colibri_pxa300_defconfig +++ b/arch/arm/configs/colibri_pxa300_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set @@ -14,18 +13,14 @@ CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_LRO is not set CONFIG_IPV6=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_MISC_DEVICES is not set CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_AX88796=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set @@ -45,7 +40,6 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y -# CONFIG_HID_SUPPORT is not set CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_MON=y @@ -54,16 +48,13 @@ CONFIG_MMC=y # CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_MMC_PXA=y CONFIG_EXT3_FS=y -CONFIG_INOTIFY=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_AES=y diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig index a8f3c596c39c..d398ae53aba7 100644 --- a/arch/arm/configs/collie_defconfig +++ b/arch/arm/configs/collie_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 @@ -26,8 +25,6 @@ CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IPV6 is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_JEDECPROBE=y @@ -91,5 +88,4 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_DETECT_SOFTLOCKUP is not set CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_ERRORS=y CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index 462533bd84c6..09e1672777c9 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_LOG_BUF_SHIFT=14 @@ -33,26 +32,22 @@ CONFIG_UNIX=y CONFIG_XFRM_USER=m CONFIG_INET=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_LRO is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m @@ -69,8 +64,6 @@ CONFIG_IRNET=m CONFIG_IRCOMM=m CONFIG_PXA_FICP=m CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m @@ -90,9 +83,7 @@ CONFIG_BT_HCIBTUART=m CONFIG_BT_HCIVHCI=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_ROM=y CONFIG_MTD_COMPLEX_MAPPINGS=y @@ -209,7 +200,6 @@ CONFIG_USB_EMI26=m CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m -CONFIG_USB_LED=m CONFIG_USB_CYTHERM=m CONFIG_USB_IDMOUSE=m CONFIG_USB_GADGET=y @@ -221,7 +211,6 @@ CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_PXA=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y @@ -243,9 +232,7 @@ CONFIG_NLS_UTF8=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_PREEMPT is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_TEST=m diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 67db82999c06..06e2e2a1a9be 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -58,6 +58,7 @@ CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FW_LOADER is not set CONFIG_DA8XX_MSTPRI=y CONFIG_MTD=m +CONFIG_MTD_TESTS=m CONFIG_MTD_BLOCK=m CONFIG_MTD_CFI=m CONFIG_MTD_CFI_INTELEXT=m @@ -83,14 +84,13 @@ CONFIG_NETCONSOLE=y CONFIG_TUN=m CONFIG_DM9000=y CONFIG_TI_DAVINCI_EMAC=y +CONFIG_LSI_ET1011C_PHY=y CONFIG_LXT_PHY=y CONFIG_SMSC_PHY=y -CONFIG_LSI_ET1011C_PHY=y CONFIG_PPP=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m -# CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=m CONFIG_INPUT_EVBUG=m CONFIG_KEYBOARD_ATKBD=m @@ -122,6 +122,7 @@ CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y +CONFIG_BATTERY_LEGO_EV3=m CONFIG_WATCHDOG=y CONFIG_DAVINCI_WATCHDOG=m CONFIG_MFD_DM355EVM_MSP=y @@ -131,6 +132,8 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_TPS6507X=y CONFIG_MEDIA_SUPPORT=m CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_USB_SUPPORT=y +CONFIG_USB_VIDEO_CLASS=m CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_VIDEO_DAVINCI_VPIF_DISPLAY=m CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE=m @@ -147,6 +150,7 @@ CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_SOUND=m CONFIG_SND=m +CONFIG_SND_USB_AUDIO=m CONFIG_SND_SOC=m CONFIG_SND_EDMA_SOC=m CONFIG_SND_DA850_SOC_EVM=m @@ -174,7 +178,7 @@ CONFIG_USB_OHCI_HCD=m CONFIG_USB_STORAGE=m CONFIG_USB_MUSB_HDRC=m CONFIG_USB_MUSB_DA8XX=m -CONFIG_MUSB_PIO_ONLY=y +CONFIG_USB_TI_CPPI41_DMA=y CONFIG_USB_TEST=m CONFIG_NOP_USB_XCEIV=m CONFIG_USB_GADGET=m @@ -182,6 +186,7 @@ CONFIG_USB_GADGET_DEBUG_FILES=y CONFIG_USB_GADGET_DEBUG_FS=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m +CONFIG_USB_G_NCM=m CONFIG_USB_GADGETFS=m CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m @@ -236,7 +241,6 @@ CONFIG_NLS_ASCII=m CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=m CONFIG_DEBUG_FS=y -CONFIG_TIMER_STATS=y CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_MUTEXES=y # CONFIG_ARM_UNWIND is not set diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig index 701677f9248c..a93cc2fcf791 100644 --- a/arch/arm/configs/dove_defconfig +++ b/arch/arm/configs/dove_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y diff --git a/arch/arm/configs/ebsa110_defconfig b/arch/arm/configs/ebsa110_defconfig index 14559dbb4c2c..731a22a55f4e 100644 --- a/arch/arm/configs/ebsa110_defconfig +++ b/arch/arm/configs/ebsa110_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_LOG_BUF_SHIFT=14 diff --git a/arch/arm/configs/efm32_defconfig b/arch/arm/configs/efm32_defconfig index c0dac0f0f804..860d27138e6f 100644 --- a/arch/arm/configs/efm32_defconfig +++ b/arch/arm/configs/efm32_defconfig @@ -38,7 +38,6 @@ CONFIG_INET=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig index 8e10df7ba1b4..30a67523f860 100644 --- a/arch/arm/configs/em_x270_defconfig +++ b/arch/arm/configs/em_x270_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y CONFIG_IKCONFIG=y @@ -34,12 +33,9 @@ CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_BNEP=m CONFIG_BT_HIDP=m @@ -49,7 +45,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_FW_LOADER=m CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_JEDECPROBE=y @@ -63,7 +58,6 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_PLATFORM=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_LOWLEVEL is not set @@ -71,8 +65,6 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_DM9000=y CONFIG_DM9000_DEBUGLEVEL=1 -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set CONFIG_PPP=m CONFIG_PPP_MULTILINK=y CONFIG_PPP_FILTER=y @@ -144,7 +136,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y @@ -160,7 +151,6 @@ CONFIG_RTC_DRV_V3020=y CONFIG_RTC_DRV_PXA=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y -CONFIG_INOTIFY=y CONFIG_VFAT_FS=m # CONFIG_PROC_PAGE_MONITOR is not set CONFIG_TMPFS=y @@ -180,10 +170,7 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_MICHAEL_MIC=m diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 158dde87f5d0..78cd73d1c795 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -45,7 +45,6 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_LRO is not set CONFIG_IPV6=y # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set # CONFIG_INET6_XFRM_MODE_TUNNEL is not set diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig index d68ac67c201c..cd27d651463c 100644 --- a/arch/arm/configs/eseries_pxa_defconfig +++ b/arch/arm/configs/eseries_pxa_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -29,7 +28,6 @@ CONFIG_PM=y CONFIG_NET=y CONFIG_UNIX=y CONFIG_INET=y -# CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_IRDA=y CONFIG_IRLAN=m @@ -55,8 +53,6 @@ CONFIG_ATA=m # CONFIG_SATA_PMP is not set CONFIG_PATA_PCMCIA=m CONFIG_NETDEVICES=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set CONFIG_HERMES=m CONFIG_PCMCIA_HERMES=m CONFIG_NET_PCMCIA=y @@ -97,11 +93,9 @@ CONFIG_SND_PXA2XX_SOC=m CONFIG_SND_PXA2XX_SOC_E800=m # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_TMIO=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=m -CONFIG_INOTIFY=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_NFS_FS=y @@ -111,8 +105,6 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 6dc661c4a2c1..25325ed9319e 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -49,7 +49,6 @@ CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_CFG80211=y -CONFIG_RFKILL_REGULATOR=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_DMA_CMA=y @@ -74,6 +73,7 @@ CONFIG_MWIFIEX=m CONFIG_MWIFIEX_SDIO=m CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_SAMSUNG=y CONFIG_KEYBOARD_CROS_EC=y # CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_CYAPA=y @@ -83,7 +83,6 @@ CONFIG_TOUCHSCREEN_MMS114=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MAX77693_HAPTIC=y CONFIG_INPUT_MAX8997_HAPTIC=y -CONFIG_KEYBOARD_SAMSUNG=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_SAMSUNG=y @@ -158,6 +157,7 @@ CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m CONFIG_VIDEO_SAMSUNG_S5P_MFC=m CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m CONFIG_V4L_TEST_DRIVERS=y +CONFIG_VIDEO_VIVID=m CONFIG_DRM=y CONFIG_DRM_EXYNOS=y CONFIG_DRM_EXYNOS_FIMD=y @@ -220,7 +220,6 @@ CONFIG_DMADEVICES=y CONFIG_PL330_DMA=y CONFIG_CROS_EC_CHARDEV=y CONFIG_COMMON_CLK_MAX77686=y -CONFIG_COMMON_CLK_MAX77802=y CONFIG_COMMON_CLK_S2MPS11=y CONFIG_PM_DEVFREQ=y CONFIG_DEVFREQ_GOV_PERFORMANCE=y @@ -265,6 +264,12 @@ CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_USER=y +CONFIG_CRYPTO_USER=m +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_CRYPTO_USER_API_RNG=m +CONFIG_CRYPTO_USER_API_AEAD=m +CONFIG_CRYPTO_DEV_EXYNOS_RNG=y CONFIG_CRYPTO_DEV_S5P=y CONFIG_ARM_CRYPTO=y CONFIG_CRYPTO_SHA1_ARM_NEON=m @@ -274,4 +279,3 @@ CONFIG_CRYPTO_AES_ARM_BS=m CONFIG_CRC_CCITT=y CONFIG_FONTS=y CONFIG_FONT_7x14=y -CONFIG_VIDEO_VIVID=m diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig index d3f1768840e2..23660f3d0f7f 100644 --- a/arch/arm/configs/ezx_defconfig +++ b/arch/arm/configs/ezx_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-ezx200910312315" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y @@ -51,7 +50,6 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m @@ -109,7 +107,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m @@ -118,7 +115,6 @@ CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m @@ -133,7 +129,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -144,15 +139,12 @@ CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m CONFIG_BRIDGE=m CONFIG_BT=y -CONFIG_BT_L2CAP=y -CONFIG_BT_SCO=y CONFIG_BT_RFCOMM=y CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=y @@ -174,7 +166,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_FW_LOADER=m CONFIG_CONNECTOR=m CONFIG_MTD=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y @@ -189,11 +180,8 @@ CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set # CONFIG_WLAN is not set CONFIG_PPP=m CONFIG_PPP_MULTILINK=y @@ -282,14 +270,12 @@ CONFIG_SND_PXA2XX_SOC=y # CONFIG_USB_HID is not set CONFIG_HID_APPLE=m CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_GADGET=y CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y CONFIG_SDIO_UART=m CONFIG_MMC_PXA=y CONFIG_MMC_SPI=y @@ -311,8 +297,6 @@ CONFIG_REISERFS_FS_XATTR=y CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y CONFIG_XFS_FS=m -CONFIG_INOTIFY=y -CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=m CONFIG_CUSE=m @@ -385,10 +369,8 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set CONFIG_DEBUG_RT_MUTEXES=y CONFIG_PROVE_LOCKING=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig index 87e020f303ab..3a7938f244e5 100644 --- a/arch/arm/configs/footbridge_defconfig +++ b/arch/arm/configs/footbridge_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_LOG_BUF_SHIFT=14 diff --git a/arch/arm/configs/h5000_defconfig b/arch/arm/configs/h5000_defconfig index 37903e3f0efc..e90d1dfeb188 100644 --- a/arch/arm/configs/h5000_defconfig +++ b/arch/arm/configs/h5000_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y @@ -31,12 +30,10 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y @@ -53,14 +50,12 @@ CONFIG_LEGACY_PTY_COUNT=32 # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set # CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set CONFIG_USB_GADGET=y CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_SA1100=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y # CONFIG_PROC_PAGE_MONITOR is not set CONFIG_TMPFS=y CONFIG_JFFS2_FS=y @@ -70,7 +65,6 @@ CONFIG_PRINTK_TIME=y CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_FTRACE is not set CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig index bed804729929..742d18cdabde 100644 --- a/arch/arm/configs/hackkit_defconfig +++ b/arch/arm/configs/hackkit_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y @@ -22,7 +21,6 @@ CONFIG_SYN_COOKIES=y CONFIG_MTD=y CONFIG_MTD_DEBUG=y CONFIG_MTD_DEBUG_VERBOSE=3 -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y @@ -44,6 +42,5 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_CRC32 is not set diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig index 7f479cdb3479..f204017c26b9 100644 --- a/arch/arm/configs/imote2_defconfig +++ b/arch/arm/configs/imote2_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 @@ -43,7 +42,6 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m @@ -101,7 +99,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m @@ -110,7 +107,6 @@ CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m @@ -125,7 +121,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -136,7 +131,6 @@ CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m @@ -154,7 +148,6 @@ CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_AFS_PARTS=y CONFIG_MTD_AR7_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y @@ -169,11 +162,8 @@ CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set # CONFIG_WLAN is not set CONFIG_PPP=m CONFIG_PPP_MULTILINK=y @@ -258,14 +248,12 @@ CONFIG_SND_SOC=y CONFIG_SND_PXA2XX_SOC=y # CONFIG_USB_HID is not set CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_GADGET=y CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y CONFIG_SDIO_UART=m CONFIG_MMC_PXA=y CONFIG_MMC_SPI=y @@ -282,8 +270,6 @@ CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PXA=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=m -CONFIG_INOTIFY=y -CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=m CONFIG_CUSE=m @@ -356,10 +342,8 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set CONFIG_DEBUG_RT_MUTEXES=y CONFIG_PROVE_LOCKING=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 5f013c9fc1ed..ca0f13cafe38 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -45,7 +45,6 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set CONFIG_NETFILTER=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index bb6fa568b620..e74de69caeab 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -55,6 +55,9 @@ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200" CONFIG_KEXEC=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y CONFIG_ARM_IMX6Q_CPUFREQ=y CONFIG_CPU_IDLE=y CONFIG_VFP=y @@ -204,6 +207,7 @@ CONFIG_POWER_SUPPLY=y CONFIG_SENSORS_GPIO_FAN=y CONFIG_SENSORS_IIO_HWMON=y CONFIG_THERMAL=y +CONFIG_THERMAL_WRITABLE_TRIPS=y CONFIG_CPU_THERMAL=y CONFIG_IMX_THERMAL=y CONFIG_WATCHDOG=y @@ -341,6 +345,7 @@ CONFIG_IMX_SDMA=y CONFIG_MXS_DMA=y CONFIG_STAGING=y CONFIG_IIO=y +CONFIG_IMX7D_ADC=y CONFIG_VF610_ADC=y CONFIG_MPL3115=y CONFIG_PWM=y @@ -378,6 +383,7 @@ CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=m CONFIG_NLS_UTF8=y CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set CONFIG_PROVE_LOCKING=y diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig index 652b7bd9e544..a73b6a31a4ab 100644 --- a/arch/arm/configs/iop13xx_defconfig +++ b/arch/arm/configs/iop13xx_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -30,7 +29,6 @@ CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_LRO is not set CONFIG_IPV6=y # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set # CONFIG_INET6_XFRM_MODE_TUNNEL is not set @@ -38,7 +36,6 @@ CONFIG_IPV6=y # CONFIG_IPV6_SIT is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y CONFIG_MTD_REDBOOT_PARTS_READONLY=y @@ -79,7 +76,6 @@ CONFIG_DMADEVICES=y CONFIG_INTEL_IOP_ADMA=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y -CONFIG_INOTIFY=y CONFIG_TMPFS=y CONFIG_ECRYPT_FS=y CONFIG_JFFS2_FS=y diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig index aa3af0a6b8f7..f63362b665eb 100644 --- a/arch/arm/configs/iop32x_defconfig +++ b/arch/arm/configs/iop32x_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_LOG_BUF_SHIFT=14 @@ -26,7 +25,6 @@ CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_LRO is not set CONFIG_IPV6=y # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set # CONFIG_INET6_XFRM_MODE_TUNNEL is not set @@ -34,11 +32,9 @@ CONFIG_IPV6=y # CONFIG_IPV6_SIT is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y CONFIG_MTD_REDBOOT_PARTS_READONLY=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y @@ -91,7 +87,6 @@ CONFIG_INTEL_IOP_ADMA=y CONFIG_NET_DMA=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y -CONFIG_INOTIFY=y CONFIG_TMPFS=y CONFIG_ECRYPT_FS=y CONFIG_JFFS2_FS=y diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig index 713faeee8cf4..d22f832ccfd6 100644 --- a/arch/arm/configs/iop33x_defconfig +++ b/arch/arm/configs/iop33x_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_LOG_BUF_SHIFT=14 @@ -24,7 +23,6 @@ CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_LRO is not set CONFIG_IPV6=y # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set # CONFIG_INET6_XFRM_MODE_TUNNEL is not set @@ -32,11 +30,9 @@ CONFIG_IPV6=y # CONFIG_IPV6_SIT is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y CONFIG_MTD_REDBOOT_PARTS_READONLY=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y @@ -73,7 +69,6 @@ CONFIG_INTEL_IOP_ADMA=y CONFIG_NET_DMA=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y -CONFIG_INOTIFY=y CONFIG_TMPFS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y @@ -84,7 +79,6 @@ CONFIG_NFSD_V3=y CONFIG_PARTITION_ADVANCED=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y CONFIG_DEBUG_LL_UART_8250=y diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index bb910d9df6c1..c8378da71913 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_LOG_BUF_SHIFT=14 @@ -50,7 +49,6 @@ CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_NETFILTER=y CONFIG_IP_VS=m @@ -63,13 +61,11 @@ CONFIG_IP_VS_LBLC=m CONFIG_IP_VS_LBLCR=m CONFIG_IP_VS_DH=m CONFIG_IP_VS_SH=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m @@ -114,9 +110,7 @@ CONFIG_NET_ACT_POLICE=y CONFIG_NET_PKTGEN=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y @@ -170,7 +164,6 @@ CONFIG_SENSORS_W83781D=y CONFIG_WATCHDOG=y CONFIG_IXP4XX_WATCHDOG=y CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_UHCI_HCD=y @@ -192,7 +185,6 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_INOTIFY=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_NFS_FS=y @@ -201,6 +193,5 @@ CONFIG_ROOT_NFS=y CONFIG_PARTITION_ADVANCED=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y CONFIG_DEBUG_LL_UART_8250=y diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig index 9056284139be..65d37ad6e6b8 100644 --- a/arch/arm/configs/jornada720_defconfig +++ b/arch/arm/configs/jornada720_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED_V2=y @@ -19,7 +18,6 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y -# CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_NETFILTER=y CONFIG_IRDA=m @@ -35,8 +33,6 @@ CONFIG_PATA_PCMCIA=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y CONFIG_NET_ETHERNET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set CONFIG_NET_PCMCIA=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 @@ -58,12 +54,10 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_SA1100=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y # CONFIG_NETWORK_FILESYSTEMS is not set @@ -106,8 +100,6 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m CONFIG_DEBUG_KERNEL=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/ks8695_defconfig b/arch/arm/configs/ks8695_defconfig index 47c488379f8f..b8b91d790e9b 100644 --- a/arch/arm/configs/ks8695_defconfig +++ b/arch/arm/configs/ks8695_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 @@ -28,14 +27,11 @@ CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_JEDECPROBE=y @@ -46,8 +42,6 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set CONFIG_PRISM54=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set # CONFIG_INPUT_KEYBOARD is not set @@ -58,7 +52,6 @@ CONFIG_SERIAL_KS8695_CONSOLE=y # CONFIG_HWMON is not set # CONFIG_VGA_CONSOLE is not set CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_SUMMARY=y diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig index 8fc6fd09eb6d..b6ddb9884326 100644 --- a/arch/arm/configs/lart_defconfig +++ b/arch/arm/configs/lart_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y @@ -31,8 +30,6 @@ CONFIG_SA1100_FIR=m CONFIG_MTD=y CONFIG_MTD_DEBUG=y CONFIG_MTD_DEBUG_VERBOSE=1 -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_LART=y CONFIG_BLK_DEV_RAM=y diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig index 2de1bf0e497e..23df2518203d 100644 --- a/arch/arm/configs/lpc18xx_defconfig +++ b/arch/arm/configs/lpc18xx_defconfig @@ -44,7 +44,6 @@ CONFIG_INET=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index 6ba430d2b5b2..e15fa5f168bb 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig @@ -112,7 +112,7 @@ CONFIG_GPIO_SX150X=y CONFIG_GPIO_74X164=y CONFIG_GPIO_MAX7301=y CONFIG_GPIO_MC33880=y -CONFIG_GPIO_MCP23S08=y +CONFIG_PINCTRL_MCP23S08=y CONFIG_SENSORS_DS620=y CONFIG_SENSORS_MAX6639=y CONFIG_WATCHDOG=y diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig index a9dd1e93b556..3a4d0e64cd6e 100644 --- a/arch/arm/configs/lpd270_defconfig +++ b/arch/arm/configs/lpd270_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SLAB=y @@ -21,9 +20,7 @@ CONFIG_IPV6=y # CONFIG_INET6_XFRM_MODE_BEET is not set # CONFIG_IPV6_SIT is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y @@ -50,7 +47,6 @@ CONFIG_SND=y # CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_PXA2XX_AC97=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y CONFIG_MSDOS_FS=y CONFIG_JFFS2_FS=y CONFIG_NFS_FS=y @@ -60,5 +56,4 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/lubbock_defconfig b/arch/arm/configs/lubbock_defconfig index c4ba27458baa..4ce2da2e76fa 100644 --- a/arch/arm/configs/lubbock_defconfig +++ b/arch/arm/configs/lubbock_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_MODULES=y @@ -20,9 +19,7 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y @@ -52,5 +49,4 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index a5b4920cd6d4..ec5674c229a3 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y @@ -35,7 +34,6 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set CONFIG_IRDA=m @@ -48,8 +46,6 @@ CONFIG_IRDA_DEBUG=y CONFIG_IRTTY_SIR=m CONFIG_PXA_FICP=m CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m @@ -60,17 +56,12 @@ CONFIG_BT_HCIBTUSB=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_PHYSMAP=y -# CONFIG_MISC_DEVICES is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set CONFIG_PPP=m CONFIG_PPP_ASYNC=m CONFIG_PPP_DEFLATE=m @@ -111,7 +102,6 @@ CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_GENERIC is not set CONFIG_BACKLIGHT_PWM=y -CONFIG_DISPLAY_SUPPORT=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y @@ -125,9 +115,7 @@ CONFIG_SND_PCM_OSS=m # CONFIG_SND_USB is not set CONFIG_SND_SOC=m CONFIG_SND_PXA2XX_SOC=m -# CONFIG_HID_SUPPORT is not set CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=m CONFIG_USB_OHCI_HCD=y CONFIG_USB_GADGET=y @@ -152,7 +140,6 @@ CONFIG_RTC_CLASS=y CONFIG_RTC_DEBUG=y CONFIG_RTC_DRV_PXA=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_TMPFS=y @@ -172,9 +159,7 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set CONFIG_TIMER_STATS=y # CONFIG_DEBUG_PREEMPT is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y CONFIG_CRYPTO=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/mainstone_defconfig b/arch/arm/configs/mainstone_defconfig index e8d26b805be6..26499b697f9f 100644 --- a/arch/arm/configs/mainstone_defconfig +++ b/arch/arm/configs/mainstone_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_MODULES=y @@ -18,9 +17,7 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y @@ -50,5 +47,4 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index 0b02e4f43c6a..cf7dcb2c86e6 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -1,10 +1,7 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_RELAY=y -CONFIG_UTS_NS=y -CONFIG_IPC_NS=y CONFIG_BLK_DEV_INITRD=y # CONFIG_COMPAT_BRK is not set CONFIG_MODULES=y @@ -13,19 +10,22 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_BLK_DEV_INTEGRITY=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_LDM_PARTITION=y CONFIG_ARCH_S3C24XX=y # CONFIG_CPU_S3C2410 is not set CONFIG_CPU_S3C2440=y +CONFIG_MACH_MINI2440=y CONFIG_S3C_ADC=y CONFIG_S3C24XX_PWM=y -CONFIG_MACH_MINI2440=y CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set CONFIG_KEXEC=y CONFIG_CPU_IDLE=y -CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PM=y CONFIG_APM_EMULATION=y CONFIG_NET=y CONFIG_PACKET=y @@ -49,7 +49,6 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m # CONFIG_IPV6 is not set CONFIG_NETFILTER=y @@ -58,8 +57,6 @@ CONFIG_VLAN_8021Q=m CONFIG_VLAN_8021Q_GVRP=y CONFIG_NET_PKTGEN=m CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m @@ -69,7 +66,6 @@ CONFIG_BT_HIDP=m CONFIG_BT_HCIBTUSB=m CONFIG_BT_HCIBTSDIO=m CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y CONFIG_BT_HCIUART_LL=y CONFIG_BT_HCIBCM203X=m @@ -77,7 +73,6 @@ CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m CONFIG_BT_HCIVHCI=m CONFIG_CFG80211=m -CONFIG_CFG80211_REG_DEBUG=y CONFIG_MAC80211=m CONFIG_MAC80211_MESH=y CONFIG_MAC80211_LEDS=y @@ -85,10 +80,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_CONNECTOR=m CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_FTL=y CONFIG_NFTL=y @@ -111,6 +103,7 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_CDROM_PKTCDVD=m CONFIG_SENSORS_TSL2550=m +CONFIG_EEPROM_AT24=y CONFIG_SCSI=m # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=m @@ -118,10 +111,15 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_TUN=m -CONFIG_NET_ETHERNET=y CONFIG_DM9000=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y +CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_HOSTAP=m CONFIG_HOSTAP_FIRMWARE=y CONFIG_HOSTAP_FIRMWARE_NVRAM=y @@ -129,14 +127,6 @@ CONFIG_LIBERTAS=m CONFIG_LIBERTAS_SDIO=m CONFIG_ZD1211RW=m CONFIG_ZD1211RW_DEBUG=y -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m CONFIG_INPUT_FF_MEMLESS=y CONFIG_INPUT_EVDEV=y CONFIG_INPUT_EVBUG=m @@ -144,10 +134,10 @@ CONFIG_INPUT_EVBUG=m CONFIG_KEYBOARD_GPIO=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_SERIO_RAW=y -CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_LEGACY_PTY_COUNT=128 CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=128 +CONFIG_SERIAL_DEV_BUS=m CONFIG_IPMI_HANDLER=m CONFIG_IPMI_DEVICE_INTERFACE=m CONFIG_IPMI_SI=m @@ -158,7 +148,6 @@ CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_S3C2410=y CONFIG_I2C_SIMTEC=y -CONFIG_EEPROM_AT24=y CONFIG_SPI=y CONFIG_SPI_S3C24XX=y CONFIG_SPI_SPIDEV=y @@ -167,7 +156,6 @@ CONFIG_SENSORS_LM75=y CONFIG_THERMAL=m CONFIG_WATCHDOG=y CONFIG_S3C2410_WATCHDOG=y -CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y @@ -179,14 +167,9 @@ CONFIG_LCD_PLATFORM=y CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_GENERIC is not set CONFIG_BACKLIGHT_PWM=y -CONFIG_DISPLAY_SUPPORT=y -# CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_MINI_4x6=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set @@ -205,10 +188,7 @@ CONFIG_SND_USB_AUDIO=m CONFIG_SND_USB_CAIAQ=m CONFIG_SND_USB_CAIAQ_INPUT=y CONFIG_SND_SOC=y -CONFIG_SND_S3C24XX_SOC=y CONFIG_HIDRAW=y -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y CONFIG_HID_GYRATION=y CONFIG_HID_NTRIG=y CONFIG_HID_PANTHERLORD=y @@ -217,8 +197,9 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_HID_TOPSEED=y +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_ACM=m CONFIG_USB_WDM=m @@ -230,13 +211,12 @@ CONFIG_USB_STORAGE_SDDR09=m CONFIG_USB_STORAGE_SDDR55=m CONFIG_USB_STORAGE_JUMPSHOT=m CONFIG_USB_STORAGE_ALAUDA=m -CONFIG_USB_LIBUSUAL=y CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_CP210X=m CONFIG_USB_SERIAL_FTDI_SIO=m CONFIG_USB_SERIAL_SPCP8X5=m CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_S3C2410=y +CONFIG_USB_S3C2410=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m @@ -248,7 +228,6 @@ CONFIG_SDIO_UART=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SPI=y CONFIG_MMC_S3C=y -CONFIG_LEDS_CLASS=y CONFIG_LEDS_S3C24XX=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGER_TIMER=y @@ -259,6 +238,7 @@ CONFIG_RTC_CLASS=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_RTC_DRV_S3C=y CONFIG_DMADEVICES=y +CONFIG_S3C24XX_DMAC=y CONFIG_EXT2_FS=m CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -266,30 +246,19 @@ CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -CONFIG_INOTIFY=y -CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y -CONFIG_CONFIGFS_FS=m CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y CONFIG_ROMFS_FS=y CONFIG_ROMFS_BACKED_BY_BOTH=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -CONFIG_EFI_PARTITION=y CONFIG_NLS_DEFAULT="cp437" CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_737=m @@ -329,24 +298,17 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m +CONFIG_DEBUG_INFO=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_DEBUG_USER=y -CONFIG_KEYS=y -CONFIG_CRYPTO_FIPS=y -CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_CCM=m -CONFIG_CRYPTO_GCM=m CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_LRW=m @@ -360,11 +322,9 @@ CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_BLOWFISH=m @@ -379,7 +339,8 @@ CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m -CONFIG_CRC_T10DIF=y CONFIG_LIBCRC32C=m +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_MINI_4x6=y diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig index f1cb95e58af0..1eeee7f11d91 100644 --- a/arch/arm/configs/mmp2_defconfig +++ b/arch/arm/configs/mmp2_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED_V2=y @@ -23,7 +22,6 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y -# CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set @@ -34,12 +32,9 @@ CONFIG_MTD_NAND=y CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_GENERIC=y # CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_SMC91X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set @@ -60,13 +55,11 @@ CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_MAX8925=y # CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_MAX8925=y CONFIG_MMC=y # CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_EXT2_FS=y @@ -87,12 +80,10 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_DYNAMIC_DEBUG is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y CONFIG_DEBUG_MMP_UART3=y CONFIG_EARLY_PRINTK=y -CONFIG_DEBUG_ERRORS=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/moxart_defconfig b/arch/arm/configs/moxart_defconfig index b2ddd534867f..2da0d9ee2107 100644 --- a/arch/arm/configs/moxart_defconfig +++ b/arch/arm/configs/moxart_defconfig @@ -36,7 +36,6 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set diff --git a/arch/arm/configs/mps2_defconfig b/arch/arm/configs/mps2_defconfig index 19d119f5b77e..0bcdec7cc169 100644 --- a/arch/arm/configs/mps2_defconfig +++ b/arch/arm/configs/mps2_defconfig @@ -35,7 +35,6 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 2685e03600b1..4d19c1b4b8e7 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -202,6 +202,8 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_DENALI_DT=y +CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_NAND_OMAP_BCH=y CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_NAND_BRCMNAND=y CONFIG_MTD_NAND_VF610_NFC=y @@ -229,6 +231,7 @@ CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_AHCI_PLATFORM=y CONFIG_AHCI_BRCM=y +CONFIG_AHCI_DM816=y CONFIG_AHCI_ST=y CONFIG_AHCI_IMX=y CONFIG_AHCI_SUNXI=y @@ -935,7 +938,13 @@ CONFIG_CPUFREQ_DT=y CONFIG_KEYSTONE_IRQ=y CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_ST=y +CONFIG_CRYPTO_USER=m +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_CRYPTO_USER_API_RNG=m +CONFIG_CRYPTO_USER_API_AEAD=m CONFIG_CRYPTO_DEV_MARVELL_CESA=m +CONFIG_CRYPTO_DEV_EXYNOS_RNG=m CONFIG_CRYPTO_DEV_S5P=m CONFIG_CRYPTO_DEV_SUN4I_SS=m CONFIG_CRYPTO_DEV_ROCKCHIP=m diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index a0345e1ce172..752e2e74de5b 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED_V2=y @@ -40,9 +39,7 @@ CONFIG_NET_PKTGEN=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_JEDECPROBE=y @@ -66,7 +63,6 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_NET_PCI=y CONFIG_MV643XX_ETH=y -# CONFIG_NETDEV_10000 is not set # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set @@ -106,7 +102,6 @@ CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_EXT4_FS=m -CONFIG_INOTIFY=y CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_UDF_FS=m @@ -130,10 +125,7 @@ CONFIG_DEBUG_KERNEL=y CONFIG_SCHEDSTATS=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_ECB=m diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig index f1a0e2503cbe..69553704f2dc 100644 --- a/arch/arm/configs/mvebu_v7_defconfig +++ b/arch/arm/configs/mvebu_v7_defconfig @@ -135,6 +135,8 @@ CONFIG_DMADEVICES=y CONFIG_MV_XOR=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_MEMORY=y +CONFIG_PWM=y +CONFIG_SENSORS_PWM_FAN=y CONFIG_EXT4_FS=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 6e0f751be229..e5822ab01b7d 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -8,6 +8,7 @@ CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_CGROUPS=y # CONFIG_UTS_NS is not set # CONFIG_IPC_NS is not set # CONFIG_PID_NS is not set @@ -38,7 +39,6 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set CONFIG_CAN=m @@ -75,6 +75,7 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_MXS_LRADC=y CONFIG_TOUCHSCREEN_TSC2007=m # CONFIG_SERIO is not set CONFIG_DEVPTS_MULTIPLE_INSTANCES=y @@ -95,6 +96,7 @@ CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_STMP3XXX_RTC_WATCHDOG=y +CONFIG_MFD_MXS_LRADC=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_FB=y @@ -136,10 +138,9 @@ CONFIG_RTC_DRV_DS1307=m CONFIG_RTC_DRV_STMP=y CONFIG_DMADEVICES=y CONFIG_MXS_DMA=y -CONFIG_STAGING=y -CONFIG_MXS_LRADC=y CONFIG_IIO=y CONFIG_IIO_SYSFS_TRIGGER=y +CONFIG_MXS_LRADC_ADC=y CONFIG_PWM=y CONFIG_PWM_MXS=y CONFIG_NVMEM=y diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig index 460dca4a4f98..018a1092d0e7 100644 --- a/arch/arm/configs/neponset_defconfig +++ b/arch/arm/configs/neponset_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y @@ -25,8 +24,6 @@ CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IPV6 is not set CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y @@ -84,5 +81,4 @@ CONFIG_NLS_ISO8859_1=m CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/netwinder_defconfig b/arch/arm/configs/netwinder_defconfig index f1395bbd436c..2e3b20ef0db1 100644 --- a/arch/arm/configs/netwinder_defconfig +++ b/arch/arm/configs/netwinder_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_ARCH_FOOTBRIDGE=y @@ -21,7 +20,6 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y -CONFIG_IP_NF_QUEUE=y CONFIG_IP_NF_IPTABLES=y CONFIG_PARPORT=y CONFIG_PARPORT_PC=y @@ -65,7 +63,6 @@ CONFIG_SOUND_DMAP=y CONFIG_SOUND_YM3812=y CONFIG_SOUND_WAVEARTIST=y CONFIG_EXT2_FS=y -CONFIG_AUTOFS_FS=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig index 9c0ad7993986..cc5c5f9ef720 100644 --- a/arch/arm/configs/netx_defconfig +++ b/arch/arm/configs/netx_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y @@ -34,12 +33,9 @@ CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_NETFILTER=y -CONFIG_IP_NF_QUEUE=m CONFIG_NET_PKTGEN=m CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y @@ -61,7 +57,6 @@ CONFIG_FB_ARMCLCD=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_RTC_CLASS=y -CONFIG_INOTIFY=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_NFS_FS=y @@ -70,7 +65,6 @@ CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_ERRORS=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig index 7d2ad30d9e70..0ac44acd5bc4 100644 --- a/arch/arm/configs/nhk8815_defconfig +++ b/arch/arm/configs/nhk8815_defconfig @@ -32,7 +32,6 @@ CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_NET_IPIP=y CONFIG_IP_MROUTE=y -# CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_BT=m CONFIG_BT_RFCOMM=m diff --git a/arch/arm/configs/nuc910_defconfig b/arch/arm/configs/nuc910_defconfig index 10180cfde162..a72653645f9d 100644 --- a/arch/arm/configs/nuc910_defconfig +++ b/arch/arm/configs/nuc910_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y @@ -16,16 +15,12 @@ CONFIG_KEXEC=y CONFIG_FPE_NWFPE=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 -# CONFIG_MISC_DEVICES is not set CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y @@ -42,7 +37,6 @@ CONFIG_SERIAL_8250_NR_UARTS=1 # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set # CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set CONFIG_USB=y CONFIG_USB_MON=y CONFIG_USB_STORAGE=y @@ -56,5 +50,4 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_DEBUG_FS=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_CRC32 is not set diff --git a/arch/arm/configs/nuc950_defconfig b/arch/arm/configs/nuc950_defconfig index 27aa8731330b..614a0a28d0b4 100644 --- a/arch/arm/configs/nuc950_defconfig +++ b/arch/arm/configs/nuc950_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y @@ -22,16 +21,12 @@ CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_MISC=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 -# CONFIG_MISC_DEVICES is not set CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y @@ -59,7 +54,6 @@ CONFIG_FONT_8x16=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_HID_SUPPORT is not set CONFIG_USB=y CONFIG_USB_MON=y CONFIG_USB_STORAGE=y @@ -73,4 +67,3 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_DEBUG_FS=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/arm/configs/nuc960_defconfig b/arch/arm/configs/nuc960_defconfig index 56fd7ad0ff13..b84bbd216153 100644 --- a/arch/arm/configs/nuc960_defconfig +++ b/arch/arm/configs/nuc960_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y @@ -22,16 +21,12 @@ CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_MISC=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 -# CONFIG_MISC_DEVICES is not set CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y @@ -48,7 +43,6 @@ CONFIG_SERIAL_8250_NR_UARTS=1 # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set # CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set CONFIG_USB=y CONFIG_USB_MON=y CONFIG_USB_STORAGE=y @@ -62,5 +56,4 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_DEBUG_FS=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_CRC32 is not set diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 6ffc9844542d..72f4bc83f467 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -72,7 +72,6 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set CONFIG_IPV6=y CONFIG_NETFILTER=y @@ -252,7 +251,6 @@ CONFIG_SECURITY=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_PCBC=y CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_ZLIB=y CONFIG_CRYPTO_LZO=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 27a70a7a50f6..e39ee282e6ca 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -64,7 +63,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_JEDECPROBE=y diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig index 83c135e19aba..e0a614272561 100644 --- a/arch/arm/configs/palmz72_defconfig +++ b/arch/arm/configs/palmz72_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 @@ -30,11 +29,9 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_BLK_DEV_LOOP=y -# CONFIG_MISC_DEVICES is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set @@ -56,12 +53,10 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y -CONFIG_DISPLAY_SUPPORT=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONTS=y CONFIG_FONT_8x8=y -# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y CONFIG_MMC_DEBUG=y @@ -80,6 +75,5 @@ CONFIG_TMPFS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_866=y CONFIG_NLS_UTF8=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_DEBUG_USER=y CONFIG_CRC_T10DIF=y diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig index b5624e325817..9c88a193490c 100644 --- a/arch/arm/configs/pcm027_defconfig +++ b/arch/arm/configs/pcm027_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -34,28 +33,22 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_PHYSMAP=y # CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_SMC91X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set @@ -74,7 +67,6 @@ CONFIG_SND=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_PXA2XX_AC97=y -# CONFIG_HID_SUPPORT is not set CONFIG_USB=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig index cb08cc561da5..f0541b060cfa 100644 --- a/arch/arm/configs/pleb_defconfig +++ b/arch/arm/configs/pleb_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 @@ -24,11 +23,9 @@ CONFIG_INET=y CONFIG_SYN_COOKIES=y # CONFIG_IPV6 is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig index 74d7e0104f8d..e7c7b91b6de2 100644 --- a/arch/arm/configs/pxa168_defconfig +++ b/arch/arm/configs/pxa168_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED_V2=y @@ -24,18 +23,14 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y -# CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_SMC91X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set @@ -46,9 +41,7 @@ CONFIG_SERIAL_PXA_CONSOLE=y # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set # CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set -CONFIG_INOTIFY=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_CRAMFS=y @@ -62,9 +55,7 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/pxa255-idp_defconfig b/arch/arm/configs/pxa255-idp_defconfig index 088627ad875f..4a383afa5e87 100644 --- a/arch/arm/configs/pxa255-idp_defconfig +++ b/arch/arm/configs/pxa255-idp_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_MODULES=y @@ -18,8 +17,6 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y # CONFIG_IPV6 is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y @@ -54,5 +51,4 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig index 5f337d7ceb5b..bfea6874b0a1 100644 --- a/arch/arm/configs/pxa3xx_defconfig +++ b/arch/arm/configs/pxa3xx_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=18 CONFIG_SYSFS_DEPRECATED_V2=y @@ -25,15 +24,12 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_PXA3xx=y @@ -43,12 +39,9 @@ CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_GENERIC=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_SMC91X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y @@ -92,7 +85,6 @@ CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FONTS=y CONFIG_FONT_6x11=y CONFIG_LOGO=y -# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y CONFIG_MMC_PXA=y @@ -125,7 +117,6 @@ CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y # CONFIG_SCHED_DEBUG is not set CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_SPINLOCK_SLEEP=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig index 3bb7771d3c19..3aff71e6dae5 100644 --- a/arch/arm/configs/pxa910_defconfig +++ b/arch/arm/configs/pxa910_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED_V2=y @@ -24,18 +23,14 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y -# CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_SMC91X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set @@ -54,9 +49,7 @@ CONFIG_LOGO=y # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set # CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set -CONFIG_INOTIFY=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_CRAMFS=y @@ -70,9 +63,7 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y CONFIG_DEBUG_MMP_UART2=y CONFIG_EARLY_PRINTK=y diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index 1318f61589dc..64e3a2a8cede 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -156,7 +156,6 @@ CONFIG_BT_HCIVHCI=m CONFIG_BT_MRVL=m CONFIG_BT_MRVL_SDIO=m CONFIG_CFG80211=m -CONFIG_CFG80211_REG_DEBUG=y CONFIG_MAC80211=m CONFIG_RFKILL=y CONFIG_RFKILL_INPUT=y @@ -592,7 +591,6 @@ CONFIG_USB_EMI26=m CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m -CONFIG_USB_LED=m CONFIG_USB_CYTHERM=m CONFIG_USB_IDMOUSE=m CONFIG_USB_GPIO_VBUS=y diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index 07666a7a9de5..b02039c712c3 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -52,7 +52,6 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_CFG80211=y CONFIG_RFKILL=y @@ -113,6 +112,7 @@ CONFIG_SPI_QUP=y CONFIG_SPMI=y CONFIG_PINCTRL_APQ8064=y CONFIG_PINCTRL_APQ8084=y +CONFIG_PINCTRL_IPQ4019=y CONFIG_PINCTRL_IPQ8064=y CONFIG_PINCTRL_MSM8660=y CONFIG_PINCTRL_MSM8960=y @@ -173,6 +173,7 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_PM8058=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RPMSG_QCOM_SMD=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PM8XXX=y CONFIG_DMADEVICES=y @@ -182,6 +183,7 @@ CONFIG_COMMON_CLK_QCOM=y CONFIG_QCOM_CLK_RPM=y CONFIG_QCOM_CLK_SMD_RPM=y CONFIG_APQ_MMCC_8084=y +CONFIG_IPQ_GCC_4019=y CONFIG_IPQ_LCC_806X=y CONFIG_MSM_GCC_8660=y CONFIG_MSM_LCC_8960=y diff --git a/arch/arm/configs/raumfeld_defconfig b/arch/arm/configs/raumfeld_defconfig index 3d833aea545a..e3dc80ead465 100644 --- a/arch/arm/configs/raumfeld_defconfig +++ b/arch/arm/configs/raumfeld_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_MODULES=y @@ -24,16 +23,11 @@ CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_LRO is not set CONFIG_IPV6=y CONFIG_CFG80211=y -CONFIG_CFG80211_REG_DEBUG=y CONFIG_MAC80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_NFTL=y CONFIG_NFTL_RW=y @@ -50,8 +44,6 @@ CONFIG_CHR_DEV_SG=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_SMSC911X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set CONFIG_LIBERTAS=y CONFIG_LIBERTAS_SDIO=m CONFIG_USB_USBNET=y @@ -146,7 +138,6 @@ CONFIG_UIO=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XIP=y CONFIG_EXT3_FS=y -CONFIG_INOTIFY=y CONFIG_FSCACHE=y CONFIG_FSCACHE_STATS=y CONFIG_CACHEFILES=y @@ -199,9 +190,7 @@ CONFIG_NLS_UTF8=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig index 9e77dc7b828f..2a6d69d896bd 100644 --- a/arch/arm/configs/realview_defconfig +++ b/arch/arm/configs/realview_defconfig @@ -35,7 +35,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig index 89631795a915..3b82b64950d9 100644 --- a/arch/arm/configs/rpc_defconfig +++ b/arch/arm/configs/rpc_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 @@ -51,8 +50,6 @@ CONFIG_NET_ETHERNET=y CONFIG_ARM_ETHER1=y CONFIG_ARM_ETHER3=y CONFIG_ARM_ETHERH=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set CONFIG_PPP=m CONFIG_PPPOE=m CONFIG_INPUT_EVDEV=y @@ -81,13 +78,11 @@ CONFIG_SOUND=m CONFIG_SOUND_PRIME=m CONFIG_SOUND_OSS=m CONFIG_SOUND_VIDC=m -# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PCF8583=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y -CONFIG_INOTIFY=y CONFIG_AUTOFS4_FS=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y @@ -129,6 +124,5 @@ CONFIG_NLS_KOI8_R=m CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y CONFIG_DEBUG_LL_UART_8250=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 1e6c48dd7b11..2afb359f3168 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_IKCONFIG=m CONFIG_IKCONFIG_PROC=y @@ -12,9 +11,6 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_BSD_DISKLABEL=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_ARCH_S3C24XX=y -CONFIG_S3C_BOOT_ERROR_RESET=y -CONFIG_S3C_ADC=y -CONFIG_S3C24XX_PWM=y CONFIG_CPU_S3C2412=y CONFIG_CPU_S3C2416=y CONFIG_CPU_S3C2440=y @@ -43,15 +39,13 @@ CONFIG_MACH_RX3715=y CONFIG_ARCH_S3C2440=y CONFIG_MACH_NEO1973_GTA02=y CONFIG_MACH_RX1950=y -CONFIG_SMDK2440_CPU2442=y CONFIG_MACH_SMDK2443=y -# CONFIG_ARM_THUMB is not set +CONFIG_S3C_ADC=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0" CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE_XP=y -CONFIG_BINFMT_AOUT=y CONFIG_APM_EMULATION=m CONFIG_NET=y CONFIG_PACKET=y @@ -67,7 +61,6 @@ CONFIG_NET_IPIP=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m -# CONFIG_INET_LRO is not set CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_HSTCP=m CONFIG_TCP_CONG_HYBLA=m @@ -86,9 +79,6 @@ CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_DCCP=y -CONFIG_NF_CT_PROTO_SCTP=y -CONFIG_NF_CT_PROTO_UDPLITE=y CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m @@ -102,6 +92,7 @@ CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_LED=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -139,16 +130,13 @@ CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m CONFIG_IP_VS=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_IP_NF_NAT=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m @@ -161,7 +149,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -172,7 +159,6 @@ CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m @@ -185,7 +171,6 @@ CONFIG_BT_BNEP_MC_FILTER=y CONFIG_BT_BNEP_PROTO_FILTER=y CONFIG_BT_HIDP=m CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y CONFIG_BT_HCIUART_LL=y CONFIG_BT_HCIBCM203X=m @@ -201,7 +186,6 @@ CONFIG_MTD=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_JEDECPROBE=y @@ -216,9 +200,9 @@ CONFIG_PARPORT_AX88796=m CONFIG_PARPORT_1284=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_UB=m CONFIG_BLK_DEV_RAM=y CONFIG_ATA_OVER_ETH=m +CONFIG_EEPROM_AT24=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_BLK_DEV_SR=y @@ -279,13 +263,13 @@ CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_DEV_BUS=m CONFIG_PRINTER=y CONFIG_PPDEV=y CONFIG_HW_RANDOM=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_S3C2410=y CONFIG_I2C_SIMTEC=y -CONFIG_EEPROM_AT24=y CONFIG_SPI=y CONFIG_SPI_GPIO=m CONFIG_SPI_S3C24XX=m @@ -297,6 +281,7 @@ CONFIG_SENSORS_LM85=m CONFIG_WATCHDOG=y CONFIG_S3C2410_WATCHDOG=y CONFIG_MFD_SM501=y +CONFIG_TPS65010=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y @@ -336,7 +321,6 @@ CONFIG_USB_STORAGE_ALAUDA=m CONFIG_USB_STORAGE_ONETOUCH=m CONFIG_USB_STORAGE_KARMA=m CONFIG_USB_STORAGE_CYPRESS_ATACB=m -CONFIG_USB_LIBUSUAL=y CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m CONFIG_USB_USS720=m @@ -353,7 +337,6 @@ CONFIG_USB_SEVSEG=m CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m -CONFIG_USB_LED=m CONFIG_USB_CYPRESS_CY7C63=m CONFIG_USB_CYTHERM=m CONFIG_USB_IDMOUSE=m @@ -382,14 +365,14 @@ CONFIG_LEDS_TRIGGER_GPIO=m CONFIG_LEDS_TRIGGER_DEFAULT_ON=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_S3C=y +CONFIG_DMADEVICES=y +CONFIG_S3C24XX_DMAC=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT4_FS=m -CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m CONFIG_ISO9660_FS=y @@ -407,7 +390,6 @@ CONFIG_CRAMFS=y CONFIG_SQUASHFS=m CONFIG_ROMFS_FS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m @@ -452,11 +434,9 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m +CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig index e0f66936ae02..507d7ad7523a 100644 --- a/arch/arm/configs/s3c6400_defconfig +++ b/arch/arm/configs/s3c6400_defconfig @@ -1,4 +1,4 @@ -CONFIG_EXPERIMENTAL=y +CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y @@ -8,7 +8,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_MULTI_V6=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_S3C64XX=y -CONFIG_S3C_BOOT_ERROR_RESET=y CONFIG_MACH_SMDK6400=y CONFIG_MACH_ANW6410=y CONFIG_MACH_MINI6410=y @@ -19,11 +18,9 @@ CONFIG_MACH_HMT=y CONFIG_MACH_SMARTQ5=y CONFIG_MACH_SMARTQ7=y CONFIG_MACH_WLF_CRAGG_6410=y -CONFIG_CPU_32v6K=y CONFIG_AEABI=y CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144" CONFIG_VFP=y -CONFIG_PM=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_NAND=y @@ -48,14 +45,11 @@ CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_LTV350QV=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y -# CONFIG_VGA_CONSOLE is not set CONFIG_SOUND=y CONFIG_SND=m CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SOC=m -CONFIG_SND_S3C24XX_SOC=m -CONFIG_SND_SOC_SMDK_WM9713=m CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_OHCI_HCD=y @@ -68,30 +62,26 @@ CONFIG_USB_SERIAL_FTDI_SIO=m CONFIG_USB_SERIAL_PL2303=m CONFIG_MMC=y CONFIG_MMC_DEBUG=y -CONFIG_MMC_UNSAFE_RESUME=y CONFIG_SDIO_UART=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_S3C=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_S3C=y +CONFIG_PWM=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -CONFIG_INOTIFY=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_CRAMFS=y CONFIG_ROMFS_FS=y +CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_DEBUG_ATOMIC_SLEEP=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig index c51f0f02012b..09b5a7386414 100644 --- a/arch/arm/configs/s5pv210_defconfig +++ b/arch/arm/configs/s5pv210_defconfig @@ -1,16 +1,16 @@ -CONFIG_EXPERIMENTAL=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_BSD_DISKLABEL=y +CONFIG_SOLARIS_X86_PARTITION=y CONFIG_ARCH_S5PV210=y -CONFIG_S3C_LOWLEVEL_UART_PORT=1 -CONFIG_S3C_DEV_FB=y -CONFIG_S5PV210_SETUP_FB_24BPP=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_VMSPLIT_2G=y CONFIG_PREEMPT=y CONFIG_AEABI=y @@ -21,7 +21,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_MISC_DEVICES is not set CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y @@ -34,36 +33,27 @@ CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_HW_RANDOM=y # CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_CRAMFS=y CONFIG_ROMFS_FS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y -CONFIG_SOLARIS_X86_PARTITION=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y +CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_DEBUG_ATOMIC_SLEEP=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y +CONFIG_DEBUG_S3C_UART1=y CONFIG_EARLY_PRINTK=y -CONFIG_DEBUG_S3C_UART=1 CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index 777c9e986425..6529cb43e0fd 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -3,6 +3,8 @@ CONFIG_SYSVIPC=y CONFIG_FHANDLE=y CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y @@ -44,7 +46,6 @@ CONFIG_IP_PNP_RARP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set # CONFIG_INET6_XFRM_MODE_TUNNEL is not set @@ -52,6 +53,7 @@ CONFIG_IP_PNP_RARP=y CONFIG_IPV6_SIT_6RD=y CONFIG_CAN=y CONFIG_CAN_AT91=y +CONFIG_CAN_M_CAN=y CONFIG_CFG80211=y CONFIG_MAC80211=y CONFIG_MAC80211_LEDS=y diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig index e52395629810..de33abdeb6fa 100644 --- a/arch/arm/configs/shannon_defconfig +++ b/arch/arm/configs/shannon_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y @@ -17,8 +16,6 @@ CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IPV6 is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_AMDSTD=y diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig index d3358155bf8a..28d99d8895f9 100644 --- a/arch/arm/configs/simpad_defconfig +++ b/arch/arm/configs/simpad_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="oe1" CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 @@ -33,18 +32,13 @@ CONFIG_IRCOMM=m CONFIG_IRTTY_SIR=m CONFIG_SA1100_FIR=m CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m CONFIG_BT_BNEP_MC_FILTER=y CONFIG_BT_BNEP_PROTO_FILTER=y CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_JEDECPROBE=y @@ -107,5 +101,4 @@ CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/spear13xx_defconfig b/arch/arm/configs/spear13xx_defconfig index d271b263f35d..7b36eeb928bb 100644 --- a/arch/arm/configs/spear13xx_defconfig +++ b/arch/arm/configs/spear13xx_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BLK_DEV_INITRD=y @@ -32,7 +31,6 @@ CONFIG_NET_IPIP=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_OF_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_FSMC=y @@ -73,9 +71,7 @@ CONFIG_GPIO_SYSFS=y CONFIG_GPIO_PL061=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y -# CONFIG_HID_SUPPORT is not set CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/spear3xx_defconfig b/arch/arm/configs/spear3xx_defconfig index 7ff23a077f5d..2c5e8df33191 100644 --- a/arch/arm/configs/spear3xx_defconfig +++ b/arch/arm/configs/spear3xx_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BLK_DEV_INITRD=y @@ -17,7 +16,6 @@ CONFIG_NET=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_OF_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_FSMC=y @@ -56,9 +54,7 @@ CONFIG_WATCHDOG=y CONFIG_ARM_SP805_WATCHDOG=y CONFIG_FB=y CONFIG_FB_ARMCLCD=y -# CONFIG_HID_SUPPORT is not set CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_MMC=y diff --git a/arch/arm/configs/spear6xx_defconfig b/arch/arm/configs/spear6xx_defconfig index 7822980d7d55..124c244d8df1 100644 --- a/arch/arm/configs/spear6xx_defconfig +++ b/arch/arm/configs/spear6xx_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BLK_DEV_INITRD=y @@ -14,7 +13,6 @@ CONFIG_NET=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_OF_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_FSMC=y @@ -49,7 +47,6 @@ CONFIG_GPIO_PL061=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_ARM_SP805_WATCHDOG=y -# CONFIG_HID_SUPPORT is not set CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index d8c529332fb4..9ea82c118661 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_LOG_BUF_SHIFT=14 @@ -30,26 +29,22 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_LRO is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m @@ -66,8 +61,6 @@ CONFIG_IRNET=m CONFIG_IRCOMM=m CONFIG_PXA_FICP=m CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m @@ -87,9 +80,7 @@ CONFIG_BT_HCIBTUART=m CONFIG_BT_HCIVHCI=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_ROM=y CONFIG_MTD_COMPLEX_MAPPINGS=y @@ -203,7 +194,6 @@ CONFIG_USB_EMI26=m CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m -CONFIG_USB_LED=m CONFIG_USB_CYTHERM=m CONFIG_USB_IDMOUSE=m CONFIG_USB_GADGET=m @@ -221,7 +211,6 @@ CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y @@ -243,9 +232,7 @@ CONFIG_NLS_UTF8=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_PREEMPT is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_TEST=m diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig index a0975386a96c..90e5c46913a5 100644 --- a/arch/arm/configs/stm32_defconfig +++ b/arch/arm/configs/stm32_defconfig @@ -52,7 +52,10 @@ CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_STM32F4=y # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y CONFIG_REGULATOR=y +CONFIG_GPIO_STMPE=y +CONFIG_MFD_STMPE=y CONFIG_REGULATOR_FIXED_VOLTAGE=y # CONFIG_USB_SUPPORT is not set CONFIG_NEW_LEDS=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index 5cd5dd70bc83..0ec1d1ec130f 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -27,7 +27,6 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set CONFIG_CAN=y diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 7209a2caefcf..d0a9e5dd9135 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -1,13 +1,12 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_KALLSYMS is not set -# CONFIG_BUGVERBOSE is not set # CONFIG_ELF_CORE is not set # CONFIG_SHMEM is not set CONFIG_SLOB=y @@ -26,8 +25,6 @@ CONFIG_UNIX=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y @@ -36,22 +33,17 @@ CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_PHYSMAP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=10240 -# CONFIG_MISC_DEVICES is not set -# CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set # CONFIG_VT_CONSOLE is not set # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_S3C2410=y +CONFIG_USB_S3C2410=y CONFIG_USB_ETH=m CONFIG_EXT2_FS=y # CONFIG_DNOTIFY is not set @@ -62,8 +54,5 @@ CONFIG_JFFS2_FS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y # CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DETECT_SOFTLOCKUP is not set -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig index 492f7f3eb4ac..2b5a224d2da1 100644 --- a/arch/arm/configs/trizeps4_defconfig +++ b/arch/arm/configs/trizeps4_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y @@ -38,7 +37,6 @@ CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y -CONFIG_IP_NF_QUEUE=m CONFIG_VLAN_8021Q=m CONFIG_IRDA=m CONFIG_IRLAN=m @@ -49,8 +47,6 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y CONFIG_IRDA_FAST_RR=y CONFIG_IRTTY_SIR=m CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m @@ -60,11 +56,9 @@ CONFIG_BT_HIDP=m CONFIG_CFG80211=y CONFIG_CONNECTOR=y CONFIG_MTD=y -CONFIG_MTD_CONCAT=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y CONFIG_MTD_REDBOOT_PARTS_READONLY=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_JEDECPROBE=y @@ -163,7 +157,6 @@ CONFIG_SND_PXA2XX_AC97=y CONFIG_SND_USB_AUDIO=m # CONFIG_USB_HID is not set CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=m CONFIG_USB_SERIAL=m @@ -183,7 +176,6 @@ CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -CONFIG_INOTIFY=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index aaa95ab606a8..36d77406e31b 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -49,7 +49,6 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y # CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_MMC_ARMMMCI=y CONFIG_RTC_CLASS=y diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig index 37fe607a4ede..0fa0ed577b15 100644 --- a/arch/arm/configs/vexpress_defconfig +++ b/arch/arm/configs/vexpress_defconfig @@ -46,7 +46,6 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set CONFIG_NET_9P=y diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index 0d717a5eff29..44d4fa57ba0a 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=13 @@ -34,10 +33,8 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_BT=m -CONFIG_BT_L2CAP=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m @@ -49,7 +46,6 @@ CONFIG_FW_LOADER=m CONFIG_MTD=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=0 -CONFIG_MTD_CHAR=m CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_JEDECPROBE=y @@ -72,8 +68,6 @@ CONFIG_PATA_PCMCIA=m CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_SMC91X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set CONFIG_USB_PEGASUS=m CONFIG_USB_USBNET=m # CONFIG_USB_NET_CDC_SUBSET is not set @@ -148,7 +142,6 @@ CONFIG_EXT2_FS=m CONFIG_EXT3_FS=m # CONFIG_EXT3_FS_XATTR is not set # CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y CONFIG_VFAT_FS=m CONFIG_JFFS2_FS=y CONFIG_NFS_FS=y @@ -165,9 +158,7 @@ CONFIG_NLS_UTF8=m CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MUTEXES=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_FTRACE is not set -CONFIG_DEBUG_ERRORS=y CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_ARC4=m CONFIG_CRC_T10DIF=m diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig index 721832ffe2d7..2eda24635e65 100644 --- a/arch/arm/configs/xcep_defconfig +++ b/arch/arm/configs/xcep_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION=".xcep-itech" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y @@ -47,14 +46,10 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set -CONFIG_MTD_CONCAT=y CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PXA2XX=y -# CONFIG_MISC_DEVICES is not set CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set @@ -71,7 +66,6 @@ CONFIG_HWMON=m CONFIG_SENSORS_ADM1021=m CONFIG_SENSORS_MAX6650=m # CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_SA1100=m @@ -90,8 +84,6 @@ CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_FTRACE is not set # CONFIG_ARM_UNWIND is not set # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig index cd11da8b5123..8d4c0c926c34 100644 --- a/arch/arm/configs/zeus_defconfig +++ b/arch/arm/configs/zeus_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_TINY_RCU=y CONFIG_LOG_BUF_SHIFT=13 @@ -29,10 +28,8 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_BT=m -CONFIG_BT_L2CAP=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m @@ -46,7 +43,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_PARTS_READONLY=y -CONFIG_MTD_CHAR=m CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_JEDECPROBE=y @@ -70,8 +66,6 @@ CONFIG_PATA_PCMCIA=m CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_DM9000=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set CONFIG_HERMES=m CONFIG_PCMCIA_HERMES=m CONFIG_RT2X00=m @@ -130,7 +124,6 @@ CONFIG_SND_PXA2XX_AC97=m # CONFIG_SND_PCMCIA is not set CONFIG_SND_SOC=m CONFIG_SND_PXA2XX_SOC=m -# CONFIG_HID_SUPPORT is not set CONFIG_USB=m CONFIG_USB_OHCI_HCD=m CONFIG_USB_ACM=m @@ -164,7 +157,6 @@ CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set # CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y CONFIG_VFAT_FS=m CONFIG_TMPFS=y CONFIG_JFFS2_FS=y @@ -182,7 +174,5 @@ CONFIG_NLS_UTF8=m CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MUTEXES=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_DEBUG_ERRORS=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRC_T10DIF=m diff --git a/arch/arm/configs/zx_defconfig b/arch/arm/configs/zx_defconfig index d6253a48a9fa..dfc061d87d2f 100644 --- a/arch/arm/configs/zx_defconfig +++ b/arch/arm/configs/zx_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -79,7 +78,6 @@ CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HWMON is not set # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_DW=y CONFIG_EXT2_FS=y diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c index 883b84d828c5..0f966a8ca1ce 100644 --- a/arch/arm/crypto/aes-ce-glue.c +++ b/arch/arm/crypto/aes-ce-glue.c @@ -14,6 +14,7 @@ #include <crypto/aes.h> #include <crypto/internal/simd.h> #include <crypto/internal/skcipher.h> +#include <linux/cpufeature.h> #include <linux/module.h> #include <crypto/xts.h> @@ -425,9 +426,6 @@ static int __init aes_init(void) int err; int i; - if (!(elf_hwcap2 & HWCAP2_AES)) - return -ENODEV; - err = crypto_register_skciphers(aes_algs, ARRAY_SIZE(aes_algs)); if (err) return err; @@ -451,5 +449,5 @@ unregister_simds: return err; } -module_init(aes_init); +module_cpu_feature_match(AES, aes_init); module_exit(aes_exit); diff --git a/arch/arm/crypto/crc32-ce-glue.c b/arch/arm/crypto/crc32-ce-glue.c index e1566bec1016..1b0e0e86ee9c 100644 --- a/arch/arm/crypto/crc32-ce-glue.c +++ b/arch/arm/crypto/crc32-ce-glue.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include <linux/cpufeature.h> #include <linux/crc32.h> #include <linux/init.h> #include <linux/kernel.h> @@ -233,6 +234,11 @@ static void __exit crc32_pmull_mod_exit(void) ARRAY_SIZE(crc32_pmull_algs)); } +static const struct cpu_feature crc32_cpu_feature[] = { + { cpu_feature(CRC32) }, { cpu_feature(PMULL) }, { } +}; +MODULE_DEVICE_TABLE(cpu, crc32_cpu_feature); + module_init(crc32_pmull_mod_init); module_exit(crc32_pmull_mod_exit); diff --git a/arch/arm/crypto/ghash-ce-glue.c b/arch/arm/crypto/ghash-ce-glue.c index 7546b3c02466..6bac8bea9f1e 100644 --- a/arch/arm/crypto/ghash-ce-glue.c +++ b/arch/arm/crypto/ghash-ce-glue.c @@ -15,6 +15,7 @@ #include <crypto/cryptd.h> #include <crypto/internal/hash.h> #include <crypto/gf128mul.h> +#include <linux/cpufeature.h> #include <linux/crypto.h> #include <linux/module.h> @@ -311,9 +312,6 @@ static int __init ghash_ce_mod_init(void) { int err; - if (!(elf_hwcap2 & HWCAP2_PMULL)) - return -ENODEV; - err = crypto_register_shash(&ghash_alg); if (err) return err; @@ -334,5 +332,5 @@ static void __exit ghash_ce_mod_exit(void) crypto_unregister_shash(&ghash_alg); } -module_init(ghash_ce_mod_init); +module_cpu_feature_match(PMULL, ghash_ce_mod_init); module_exit(ghash_ce_mod_exit); diff --git a/arch/arm/crypto/sha1-ce-glue.c b/arch/arm/crypto/sha1-ce-glue.c index 80bc2fcd241a..555f72b5e659 100644 --- a/arch/arm/crypto/sha1-ce-glue.c +++ b/arch/arm/crypto/sha1-ce-glue.c @@ -11,6 +11,7 @@ #include <crypto/internal/hash.h> #include <crypto/sha.h> #include <crypto/sha1_base.h> +#include <linux/cpufeature.h> #include <linux/crypto.h> #include <linux/module.h> @@ -82,8 +83,6 @@ static struct shash_alg alg = { static int __init sha1_ce_mod_init(void) { - if (!(elf_hwcap2 & HWCAP2_SHA1)) - return -ENODEV; return crypto_register_shash(&alg); } @@ -92,5 +91,5 @@ static void __exit sha1_ce_mod_fini(void) crypto_unregister_shash(&alg); } -module_init(sha1_ce_mod_init); +module_cpu_feature_match(SHA1, sha1_ce_mod_init); module_exit(sha1_ce_mod_fini); diff --git a/arch/arm/crypto/sha2-ce-glue.c b/arch/arm/crypto/sha2-ce-glue.c index 0755b2d657f3..df4dcef054ae 100644 --- a/arch/arm/crypto/sha2-ce-glue.c +++ b/arch/arm/crypto/sha2-ce-glue.c @@ -11,6 +11,7 @@ #include <crypto/internal/hash.h> #include <crypto/sha.h> #include <crypto/sha256_base.h> +#include <linux/cpufeature.h> #include <linux/crypto.h> #include <linux/module.h> @@ -100,8 +101,6 @@ static struct shash_alg algs[] = { { static int __init sha2_ce_mod_init(void) { - if (!(elf_hwcap2 & HWCAP2_SHA2)) - return -ENODEV; return crypto_register_shashes(algs, ARRAY_SIZE(algs)); } @@ -110,5 +109,5 @@ static void __exit sha2_ce_mod_fini(void) crypto_unregister_shashes(algs, ARRAY_SIZE(algs)); } -module_init(sha2_ce_mod_init); +module_cpu_feature_match(SHA2, sha2_ce_mod_init); module_exit(sha2_ce_mod_fini); diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 3a36d99ff836..d8360501c082 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -28,7 +28,6 @@ generic-y += segment.h generic-y += sembuf.h generic-y += serial.h generic-y += shmbuf.h -generic-y += siginfo.h generic-y += simd.h generic-y += sizes.h generic-y += socket.h diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 68b06f9c65de..ad301f107dd2 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -87,6 +87,8 @@ #define CALGN(code...) #endif +#define IMM12_MASK 0xfff + /* * Enable and disable interrupts */ diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h index 36ec9c8f6e16..3234fe9bba6e 100644 --- a/arch/arm/include/asm/device.h +++ b/arch/arm/include/asm/device.h @@ -19,7 +19,8 @@ struct dev_archdata { #ifdef CONFIG_XEN const struct dma_map_ops *dev_dma_ops; #endif - bool dma_coherent; + unsigned int dma_coherent:1; + unsigned int dma_ops_setup:1; }; struct omap_device; diff --git a/arch/arm/include/asm/dma-iommu.h b/arch/arm/include/asm/dma-iommu.h index 2ef282f96651..c090ec675eac 100644 --- a/arch/arm/include/asm/dma-iommu.h +++ b/arch/arm/include/asm/dma-iommu.h @@ -9,6 +9,8 @@ #include <linux/kmemcheck.h> #include <linux/kref.h> +#define ARM_MAPPING_ERROR (~(dma_addr_t)0x0) + struct dma_iommu_mapping { /* iommu specific data */ struct iommu_domain *domain; @@ -33,5 +35,7 @@ int arm_iommu_attach_device(struct device *dev, struct dma_iommu_mapping *mapping); void arm_iommu_detach_device(struct device *dev); +int arm_dma_supported(struct device *dev, u64 mask); + #endif /* __KERNEL__ */ #endif diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 680d3f3889e7..4e0285a66ef8 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -12,18 +12,14 @@ #include <xen/xen.h> #include <asm/xen/hypervisor.h> -#define DMA_ERROR_CODE (~(dma_addr_t)0x0) extern const struct dma_map_ops arm_dma_ops; extern const struct dma_map_ops arm_coherent_dma_ops; static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus) { - return &arm_dma_ops; + return IS_ENABLED(CONFIG_MMU) ? &arm_dma_ops : &dma_noop_ops; } -#define HAVE_ARCH_DMA_SUPPORTED 1 -extern int dma_supported(struct device *dev, u64 mask); - #ifdef __arch_page_to_dma #error Please update to __arch_pfn_to_dma #endif diff --git a/arch/arm/include/asm/dmi.h b/arch/arm/include/asm/dmi.h new file mode 100644 index 000000000000..df2d2ff06f5b --- /dev/null +++ b/arch/arm/include/asm/dmi.h @@ -0,0 +1,19 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_DMI_H +#define __ASM_DMI_H + +#include <linux/io.h> +#include <linux/slab.h> + +#define dmi_early_remap(x, l) memremap(x, l, MEMREMAP_WB) +#define dmi_early_unmap(x, l) memunmap(x) +#define dmi_remap(x, l) memremap(x, l, MEMREMAP_WB) +#define dmi_unmap(x) memunmap(x) +#define dmi_alloc(l) kzalloc(l, GFP_KERNEL) + +#endif diff --git a/arch/arm/include/asm/kvm_arm.h b/arch/arm/include/asm/kvm_arm.h index a3f0b3d50089..ebf020b02bc8 100644 --- a/arch/arm/include/asm/kvm_arm.h +++ b/arch/arm/include/asm/kvm_arm.h @@ -187,6 +187,16 @@ #define FSC_FAULT (0x04) #define FSC_ACCESS (0x08) #define FSC_PERM (0x0c) +#define FSC_SEA (0x10) +#define FSC_SEA_TTW0 (0x14) +#define FSC_SEA_TTW1 (0x15) +#define FSC_SEA_TTW2 (0x16) +#define FSC_SEA_TTW3 (0x17) +#define FSC_SECC (0x18) +#define FSC_SECC_TTW0 (0x1c) +#define FSC_SECC_TTW1 (0x1d) +#define FSC_SECC_TTW2 (0x1e) +#define FSC_SECC_TTW3 (0x1f) /* Hyp Prefetch Fault Address Register (HPFAR/HDFAR) */ #define HPFAR_MASK (~0xf) diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index f0e66577ce05..127e2dd2e21c 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -44,7 +44,9 @@ #define KVM_MAX_VCPUS VGIC_V2_MAX_CPUS #endif -#define KVM_REQ_VCPU_EXIT (8 | KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP) +#define KVM_REQ_SLEEP \ + KVM_ARCH_REQ_FLAGS(0, KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP) +#define KVM_REQ_IRQ_PENDING KVM_ARCH_REQ(1) u32 *kvm_vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num, u32 mode); int __attribute_const__ kvm_target_cpu(void); @@ -233,8 +235,6 @@ struct kvm_vcpu *kvm_arm_get_running_vcpu(void); struct kvm_vcpu __percpu **kvm_get_running_vcpus(void); void kvm_arm_halt_guest(struct kvm *kvm); void kvm_arm_resume_guest(struct kvm *kvm); -void kvm_arm_halt_vcpu(struct kvm_vcpu *vcpu); -void kvm_arm_resume_vcpu(struct kvm_vcpu *vcpu); int kvm_arm_copy_coproc_indices(struct kvm_vcpu *vcpu, u64 __user *uindices); unsigned long kvm_arm_num_coproc_regs(struct kvm_vcpu *vcpu); @@ -291,20 +291,12 @@ static inline void kvm_arm_init_debug(void) {} static inline void kvm_arm_setup_debug(struct kvm_vcpu *vcpu) {} static inline void kvm_arm_clear_debug(struct kvm_vcpu *vcpu) {} static inline void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu) {} -static inline int kvm_arm_vcpu_arch_set_attr(struct kvm_vcpu *vcpu, - struct kvm_device_attr *attr) -{ - return -ENXIO; -} -static inline int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu, - struct kvm_device_attr *attr) -{ - return -ENXIO; -} -static inline int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu, - struct kvm_device_attr *attr) -{ - return -ENXIO; -} + +int kvm_arm_vcpu_arch_set_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr); +int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr); +int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr); #endif /* __ARM_KVM_HOST_H__ */ diff --git a/arch/arm/include/asm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h index 302240c19a5a..a0d726a47c8a 100644 --- a/arch/arm/include/asm/pgtable-nommu.h +++ b/arch/arm/include/asm/pgtable-nommu.h @@ -66,6 +66,7 @@ typedef pte_t *pte_addr_t; #define pgprot_noncached(prot) (prot) #define pgprot_writecombine(prot) (prot) #define pgprot_dmacoherent(prot) (prot) +#define pgprot_device(prot) (prot) /* diff --git a/arch/arm/include/asm/system_misc.h b/arch/arm/include/asm/system_misc.h index a3d61ad984af..8c4a89f5ce7d 100644 --- a/arch/arm/include/asm/system_misc.h +++ b/arch/arm/include/asm/system_misc.h @@ -22,6 +22,11 @@ extern void (*arm_pm_idle)(void); extern unsigned int user_debug; +static inline int handle_guest_sea(phys_addr_t addr, unsigned int esr) +{ + return -1; +} + #endif /* !__ASSEMBLY__ */ #endif /* __ASM_ARM_SYSTEM_MISC_H */ diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 2577405d082d..6838abc04279 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -526,7 +526,6 @@ static inline unsigned long __must_check clear_user(void __user *to, unsigned lo /* These are from lib/ code, and use __get_user() and friends */ extern long strncpy_from_user(char *dest, const char __user *src, long count); -extern __must_check long strlen_user(const char __user *str); extern __must_check long strnlen_user(const char __user *str, long n); #endif /* _ASMARM_UACCESS_H */ diff --git a/arch/arm/include/asm/xen/events.h b/arch/arm/include/asm/xen/events.h index 71e473d05fcc..620dc75362e5 100644 --- a/arch/arm/include/asm/xen/events.h +++ b/arch/arm/include/asm/xen/events.h @@ -16,7 +16,7 @@ static inline int xen_irqs_disabled(struct pt_regs *regs) return raw_irqs_disabled_flags(regs->ARM_cpsr); } -#define xchg_xen_ulong(ptr, val) atomic64_xchg(container_of((ptr), \ +#define xchg_xen_ulong(ptr, val) atomic64_xchg(container_of((long long*)(ptr),\ atomic64_t, \ counter), (val)) diff --git a/arch/arm/include/uapi/asm/Kbuild b/arch/arm/include/uapi/asm/Kbuild index 607f702c2d62..5fb3368e70cb 100644 --- a/arch/arm/include/uapi/asm/Kbuild +++ b/arch/arm/include/uapi/asm/Kbuild @@ -1,6 +1,8 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm -genhdr-y += unistd-common.h -genhdr-y += unistd-oabi.h -genhdr-y += unistd-eabi.h +generated-y += unistd-common.h +generated-y += unistd-oabi.h +generated-y += unistd-eabi.h + +generic-y += siginfo.h diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h index 5e3c673fa3f4..5db2d4c6a55f 100644 --- a/arch/arm/include/uapi/asm/kvm.h +++ b/arch/arm/include/uapi/asm/kvm.h @@ -203,6 +203,14 @@ struct kvm_arch_memory_slot { #define KVM_DEV_ARM_VGIC_LINE_LEVEL_INTID_MASK 0x3ff #define VGIC_LEVEL_INFO_LINE_LEVEL 0 +/* Device Control API on vcpu fd */ +#define KVM_ARM_VCPU_PMU_V3_CTRL 0 +#define KVM_ARM_VCPU_PMU_V3_IRQ 0 +#define KVM_ARM_VCPU_PMU_V3_INIT 1 +#define KVM_ARM_VCPU_TIMER_CTRL 1 +#define KVM_ARM_VCPU_TIMER_IRQ_VTIMER 0 +#define KVM_ARM_VCPU_TIMER_IRQ_PTIMER 1 + #define KVM_DEV_ARM_VGIC_CTRL_INIT 0 #define KVM_DEV_ARM_ITS_SAVE_TABLES 1 #define KVM_DEV_ARM_ITS_RESTORE_TABLES 2 diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 9f157e7c51e7..c731f0d2b2af 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -797,7 +797,10 @@ ENTRY(__switch_to) #if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP) ldr r7, [r2, #TI_TASK] ldr r8, =__stack_chk_guard - ldr r7, [r7, #TSK_STACK_CANARY] + .if (TSK_STACK_CANARY > IMM12_MASK) + add r7, r7, #TSK_STACK_CANARY & ~IMM12_MASK + .endif + ldr r7, [r7, #TSK_STACK_CANARY & IMM12_MASK] #endif #ifdef CONFIG_CPU_USE_DOMAINS mcr p15, 0, r6, c3, c0, 0 @ Set domain register diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index be3b3fbd382f..af2a7f1e3103 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -1090,7 +1090,7 @@ static int __init arch_hw_breakpoint_init(void) * driven low on this core and there isn't an architected way to * determine that. */ - get_online_cpus(); + cpus_read_lock(); register_undef_hook(&debug_reg_hook); /* @@ -1098,15 +1098,16 @@ static int __init arch_hw_breakpoint_init(void) * assume that a halting debugger will leave the world in a nice state * for us. */ - ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "arm/hw_breakpoint:online", - dbg_reset_online, NULL); + ret = cpuhp_setup_state_cpuslocked(CPUHP_AP_ONLINE_DYN, + "arm/hw_breakpoint:online", + dbg_reset_online, NULL); unregister_undef_hook(&debug_reg_hook); if (WARN_ON(ret < 0) || !cpumask_empty(&debug_err_mask)) { core_num_brps = 0; core_num_wrps = 0; if (ret > 0) - cpuhp_remove_state_nocalls(ret); - put_online_cpus(); + cpuhp_remove_state_nocalls_cpuslocked(ret); + cpus_read_unlock(); return 0; } @@ -1124,7 +1125,7 @@ static int __init arch_hw_breakpoint_init(void) TRAP_HWBKPT, "watchpoint debug exception"); hook_ifault_code(FAULT_CODE_DEBUG, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT, "breakpoint debug exception"); - put_online_cpus(); + cpus_read_unlock(); /* Register PM notifiers. */ pm_init(); diff --git a/arch/arm/kernel/patch.c b/arch/arm/kernel/patch.c index 020560b2dcb7..a1a34722c655 100644 --- a/arch/arm/kernel/patch.c +++ b/arch/arm/kernel/patch.c @@ -124,5 +124,5 @@ void __kprobes patch_text(void *addr, unsigned int insn) .insn = insn, }; - stop_machine(patch_text_stop_machine, &patch, NULL); + stop_machine_cpuslocked(patch_text_stop_machine, &patch, NULL); } diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index 96b7a477a8db..8226d0b71fd3 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -552,7 +552,7 @@ static int armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu) return 0; } -static struct of_device_id armv6_pmu_of_device_ids[] = { +static const struct of_device_id armv6_pmu_of_device_ids[] = { {.compatible = "arm,arm11mpcore-pmu", .data = armv6mpcore_pmu_init}, {.compatible = "arm,arm1176-pmu", .data = armv6_1176_pmu_init}, {.compatible = "arm,arm1136-pmu", .data = armv6_1136_pmu_init}, diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 32e1a9513dc7..4e80bf7420d4 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -315,7 +315,7 @@ static void __init cacheid_init(void) if (arch >= CPU_ARCH_ARMv6) { unsigned int cachetype = read_cpuid_cachetype(); - if ((arch == CPU_ARCH_ARMv7M) && !cachetype) { + if ((arch == CPU_ARCH_ARMv7M) && !(cachetype & 0xf000f)) { cacheid = 0; } else if ((cachetype & (7 << 29)) == 4 << 29) { /* ARMv7 register format */ diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 572a8df1b766..c9a0a5299827 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -555,8 +555,7 @@ static DEFINE_RAW_SPINLOCK(stop_lock); */ static void ipi_cpu_stop(unsigned int cpu) { - if (system_state == SYSTEM_BOOTING || - system_state == SYSTEM_RUNNING) { + if (system_state <= SYSTEM_RUNNING) { raw_spin_lock(&stop_lock); pr_crit("CPU%u: stopping\n", cpu); dump_stack(); diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 895ae5197159..b30eafeef096 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -403,7 +403,7 @@ out: WARN(err, "twd_local_timer_of_register failed (%d)\n", err); return err; } -CLOCKSOURCE_OF_DECLARE(arm_twd_a9, "arm,cortex-a9-twd-timer", twd_local_timer_of_register); -CLOCKSOURCE_OF_DECLARE(arm_twd_a5, "arm,cortex-a5-twd-timer", twd_local_timer_of_register); -CLOCKSOURCE_OF_DECLARE(arm_twd_11mp, "arm,arm11mp-twd-timer", twd_local_timer_of_register); +TIMER_OF_DECLARE(arm_twd_a9, "arm,cortex-a9-twd-timer", twd_local_timer_of_register); +TIMER_OF_DECLARE(arm_twd_a5, "arm,cortex-a5-twd-timer", twd_local_timer_of_register); +TIMER_OF_DECLARE(arm_twd_11mp, "arm,arm11mp-twd-timer", twd_local_timer_of_register); #endif diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 97b22fa7cb3a..629f8e9981f1 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -120,6 +120,6 @@ void __init time_init(void) #ifdef CONFIG_COMMON_CLK of_clk_init(NULL); #endif - clocksource_probe(); + timer_probe(); } } diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index f8a3ab82e77f..bf949a763dbe 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -11,6 +11,7 @@ * for more details. */ +#include <linux/arch_topology.h> #include <linux/cpu.h> #include <linux/cpufreq.h> #include <linux/cpumask.h> @@ -44,77 +45,6 @@ * to run the rebalance_domains for all idle cores and the cpu_capacity can be * updated during this sequence. */ -static DEFINE_PER_CPU(unsigned long, cpu_scale) = SCHED_CAPACITY_SCALE; -static DEFINE_MUTEX(cpu_scale_mutex); - -unsigned long arch_scale_cpu_capacity(struct sched_domain *sd, int cpu) -{ - return per_cpu(cpu_scale, cpu); -} - -static void set_capacity_scale(unsigned int cpu, unsigned long capacity) -{ - per_cpu(cpu_scale, cpu) = capacity; -} - -#ifdef CONFIG_PROC_SYSCTL -static ssize_t cpu_capacity_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct cpu *cpu = container_of(dev, struct cpu, dev); - - return sprintf(buf, "%lu\n", - arch_scale_cpu_capacity(NULL, cpu->dev.id)); -} - -static ssize_t cpu_capacity_store(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t count) -{ - struct cpu *cpu = container_of(dev, struct cpu, dev); - int this_cpu = cpu->dev.id, i; - unsigned long new_capacity; - ssize_t ret; - - if (count) { - ret = kstrtoul(buf, 0, &new_capacity); - if (ret) - return ret; - if (new_capacity > SCHED_CAPACITY_SCALE) - return -EINVAL; - - mutex_lock(&cpu_scale_mutex); - for_each_cpu(i, &cpu_topology[this_cpu].core_sibling) - set_capacity_scale(i, new_capacity); - mutex_unlock(&cpu_scale_mutex); - } - - return count; -} - -static DEVICE_ATTR_RW(cpu_capacity); - -static int register_cpu_capacity_sysctl(void) -{ - int i; - struct device *cpu; - - for_each_possible_cpu(i) { - cpu = get_cpu_device(i); - if (!cpu) { - pr_err("%s: too early to get CPU%d device!\n", - __func__, i); - continue; - } - device_create_file(cpu, &dev_attr_cpu_capacity); - } - - return 0; -} -subsys_initcall(register_cpu_capacity_sysctl); -#endif #ifdef CONFIG_OF struct cpu_efficiency { @@ -143,145 +73,6 @@ static unsigned long *__cpu_capacity; static unsigned long middle_capacity = 1; static bool cap_from_dt = true; -static u32 *raw_capacity; -static bool cap_parsing_failed; -static u32 capacity_scale; - -static int __init parse_cpu_capacity(struct device_node *cpu_node, int cpu) -{ - int ret = 1; - u32 cpu_capacity; - - if (cap_parsing_failed) - return !ret; - - ret = of_property_read_u32(cpu_node, - "capacity-dmips-mhz", - &cpu_capacity); - if (!ret) { - if (!raw_capacity) { - raw_capacity = kcalloc(num_possible_cpus(), - sizeof(*raw_capacity), - GFP_KERNEL); - if (!raw_capacity) { - pr_err("cpu_capacity: failed to allocate memory for raw capacities\n"); - cap_parsing_failed = true; - return !ret; - } - } - capacity_scale = max(cpu_capacity, capacity_scale); - raw_capacity[cpu] = cpu_capacity; - pr_debug("cpu_capacity: %s cpu_capacity=%u (raw)\n", - cpu_node->full_name, raw_capacity[cpu]); - } else { - if (raw_capacity) { - pr_err("cpu_capacity: missing %s raw capacity\n", - cpu_node->full_name); - pr_err("cpu_capacity: partial information: fallback to 1024 for all CPUs\n"); - } - cap_parsing_failed = true; - kfree(raw_capacity); - } - - return !ret; -} - -static void normalize_cpu_capacity(void) -{ - u64 capacity; - int cpu; - - if (!raw_capacity || cap_parsing_failed) - return; - - pr_debug("cpu_capacity: capacity_scale=%u\n", capacity_scale); - mutex_lock(&cpu_scale_mutex); - for_each_possible_cpu(cpu) { - capacity = (raw_capacity[cpu] << SCHED_CAPACITY_SHIFT) - / capacity_scale; - set_capacity_scale(cpu, capacity); - pr_debug("cpu_capacity: CPU%d cpu_capacity=%lu\n", - cpu, arch_scale_cpu_capacity(NULL, cpu)); - } - mutex_unlock(&cpu_scale_mutex); -} - -#ifdef CONFIG_CPU_FREQ -static cpumask_var_t cpus_to_visit; -static bool cap_parsing_done; -static void parsing_done_workfn(struct work_struct *work); -static DECLARE_WORK(parsing_done_work, parsing_done_workfn); - -static int -init_cpu_capacity_callback(struct notifier_block *nb, - unsigned long val, - void *data) -{ - struct cpufreq_policy *policy = data; - int cpu; - - if (cap_parsing_failed || cap_parsing_done) - return 0; - - switch (val) { - case CPUFREQ_NOTIFY: - pr_debug("cpu_capacity: init cpu capacity for CPUs [%*pbl] (to_visit=%*pbl)\n", - cpumask_pr_args(policy->related_cpus), - cpumask_pr_args(cpus_to_visit)); - cpumask_andnot(cpus_to_visit, - cpus_to_visit, - policy->related_cpus); - for_each_cpu(cpu, policy->related_cpus) { - raw_capacity[cpu] = arch_scale_cpu_capacity(NULL, cpu) * - policy->cpuinfo.max_freq / 1000UL; - capacity_scale = max(raw_capacity[cpu], capacity_scale); - } - if (cpumask_empty(cpus_to_visit)) { - normalize_cpu_capacity(); - kfree(raw_capacity); - pr_debug("cpu_capacity: parsing done\n"); - cap_parsing_done = true; - schedule_work(&parsing_done_work); - } - } - return 0; -} - -static struct notifier_block init_cpu_capacity_notifier = { - .notifier_call = init_cpu_capacity_callback, -}; - -static int __init register_cpufreq_notifier(void) -{ - if (cap_parsing_failed) - return -EINVAL; - - if (!alloc_cpumask_var(&cpus_to_visit, GFP_KERNEL)) { - pr_err("cpu_capacity: failed to allocate memory for cpus_to_visit\n"); - return -ENOMEM; - } - cpumask_copy(cpus_to_visit, cpu_possible_mask); - - return cpufreq_register_notifier(&init_cpu_capacity_notifier, - CPUFREQ_POLICY_NOTIFIER); -} -core_initcall(register_cpufreq_notifier); - -static void parsing_done_workfn(struct work_struct *work) -{ - cpufreq_unregister_notifier(&init_cpu_capacity_notifier, - CPUFREQ_POLICY_NOTIFIER); -} - -#else -static int __init free_raw_capacity(void) -{ - kfree(raw_capacity); - - return 0; -} -core_initcall(free_raw_capacity); -#endif /* * Iterate all CPUs' descriptor in DT and compute the efficiency @@ -320,7 +111,7 @@ static void __init parse_dt_topology(void) continue; } - if (parse_cpu_capacity(cn, cpu)) { + if (topology_parse_cpu_capacity(cn, cpu)) { of_node_put(cn); continue; } @@ -368,8 +159,8 @@ static void __init parse_dt_topology(void) middle_capacity = ((max_capacity / 3) >> (SCHED_CAPACITY_SHIFT-1)) + 1; - if (cap_from_dt && !cap_parsing_failed) - normalize_cpu_capacity(); + if (cap_from_dt) + topology_normalize_cpu_scale(); } /* @@ -382,10 +173,10 @@ static void update_cpu_capacity(unsigned int cpu) if (!cpu_capacity(cpu) || cap_from_dt) return; - set_capacity_scale(cpu, cpu_capacity(cpu) / middle_capacity); + topology_set_cpu_scale(cpu, cpu_capacity(cpu) / middle_capacity); pr_info("CPU%u: update cpu_capacity %lu\n", - cpu, arch_scale_cpu_capacity(NULL, cpu)); + cpu, topology_get_cpu_scale(NULL, cpu)); } #else diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c index fa6182a40941..1e0784ebbfd6 100644 --- a/arch/arm/kvm/guest.c +++ b/arch/arm/kvm/guest.c @@ -301,3 +301,54 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu, { return -EINVAL; } + +int kvm_arm_vcpu_arch_set_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + int ret; + + switch (attr->group) { + case KVM_ARM_VCPU_TIMER_CTRL: + ret = kvm_arm_timer_set_attr(vcpu, attr); + break; + default: + ret = -ENXIO; + break; + } + + return ret; +} + +int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + int ret; + + switch (attr->group) { + case KVM_ARM_VCPU_TIMER_CTRL: + ret = kvm_arm_timer_get_attr(vcpu, attr); + break; + default: + ret = -ENXIO; + break; + } + + return ret; +} + +int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + int ret; + + switch (attr->group) { + case KVM_ARM_VCPU_TIMER_CTRL: + ret = kvm_arm_timer_has_attr(vcpu, attr); + break; + default: + ret = -ENXIO; + break; + } + + return ret; +} diff --git a/arch/arm/kvm/handle_exit.c b/arch/arm/kvm/handle_exit.c index f86a9aaef462..54442e375354 100644 --- a/arch/arm/kvm/handle_exit.c +++ b/arch/arm/kvm/handle_exit.c @@ -72,6 +72,7 @@ static int kvm_handle_wfx(struct kvm_vcpu *vcpu, struct kvm_run *run) trace_kvm_wfx(*vcpu_pc(vcpu), false); vcpu->stat.wfi_exit_stat++; kvm_vcpu_block(vcpu); + kvm_clear_request(KVM_REQ_UNHALT, vcpu); } kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu)); diff --git a/arch/arm/kvm/hyp/switch.c b/arch/arm/kvm/hyp/switch.c index 624a510d31df..ebd2dd46adf7 100644 --- a/arch/arm/kvm/hyp/switch.c +++ b/arch/arm/kvm/hyp/switch.c @@ -237,8 +237,10 @@ void __hyp_text __noreturn __hyp_panic(int cause) vcpu = (struct kvm_vcpu *)read_sysreg(HTPIDR); host_ctxt = kern_hyp_va(vcpu->arch.host_cpu_context); + __timer_save_state(vcpu); __deactivate_traps(vcpu); __deactivate_vm(vcpu); + __banked_restore_state(host_ctxt); __sysreg_restore_state(host_ctxt); } diff --git a/arch/arm/kvm/init.S b/arch/arm/kvm/init.S index 570ed4a9c261..5386528665b5 100644 --- a/arch/arm/kvm/init.S +++ b/arch/arm/kvm/init.S @@ -104,7 +104,6 @@ __do_hyp_init: @ - Write permission implies XN: disabled @ - Instruction cache: enabled @ - Data/Unified cache: enabled - @ - Memory alignment checks: enabled @ - MMU: enabled (this code must be run from an identity mapping) mrc p15, 4, r0, c1, c0, 0 @ HSCR ldr r2, =HSCTLR_MASK @@ -112,8 +111,8 @@ __do_hyp_init: mrc p15, 0, r1, c1, c0, 0 @ SCTLR ldr r2, =(HSCTLR_EE | HSCTLR_FI | HSCTLR_I | HSCTLR_C) and r1, r1, r2 - ARM( ldr r2, =(HSCTLR_M | HSCTLR_A) ) - THUMB( ldr r2, =(HSCTLR_M | HSCTLR_A | HSCTLR_TE) ) + ARM( ldr r2, =(HSCTLR_M) ) + THUMB( ldr r2, =(HSCTLR_M | HSCTLR_TE) ) orr r1, r1, r2 orr r0, r0, r1 mcr p15, 4, r0, c1, c0, 0 @ HSCR diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c index 1da8b2d14550..5ed0c3ee33d6 100644 --- a/arch/arm/kvm/reset.c +++ b/arch/arm/kvm/reset.c @@ -37,16 +37,6 @@ static struct kvm_regs cortexa_regs_reset = { .usr_regs.ARM_cpsr = SVC_MODE | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT, }; -static const struct kvm_irq_level cortexa_ptimer_irq = { - { .irq = 30 }, - .level = 1, -}; - -static const struct kvm_irq_level cortexa_vtimer_irq = { - { .irq = 27 }, - .level = 1, -}; - /******************************************************************************* * Exported reset function @@ -62,16 +52,12 @@ static const struct kvm_irq_level cortexa_vtimer_irq = { int kvm_reset_vcpu(struct kvm_vcpu *vcpu) { struct kvm_regs *reset_regs; - const struct kvm_irq_level *cpu_vtimer_irq; - const struct kvm_irq_level *cpu_ptimer_irq; switch (vcpu->arch.target) { case KVM_ARM_TARGET_CORTEX_A7: case KVM_ARM_TARGET_CORTEX_A15: reset_regs = &cortexa_regs_reset; vcpu->arch.midr = read_cpuid_id(); - cpu_vtimer_irq = &cortexa_vtimer_irq; - cpu_ptimer_irq = &cortexa_ptimer_irq; break; default: return -ENODEV; @@ -84,5 +70,5 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) kvm_reset_coprocs(vcpu); /* Reset arch_timer context */ - return kvm_timer_vcpu_reset(vcpu, cpu_vtimer_irq, cpu_ptimer_irq); + return kvm_timer_vcpu_reset(vcpu); } diff --git a/arch/arm/mach-actions/Kconfig b/arch/arm/mach-actions/Kconfig new file mode 100644 index 000000000000..ad9c5c89c683 --- /dev/null +++ b/arch/arm/mach-actions/Kconfig @@ -0,0 +1,16 @@ +menuconfig ARCH_ACTIONS + bool "Actions Semi SoCs" + depends on ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select ARM_GLOBAL_TIMER + select CACHE_L2X0 + select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK + select COMMON_CLK + select GENERIC_IRQ_CHIP + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + select OWL_PM_DOMAINS_HELPER + select OWL_TIMER + help + This enables support for the Actions Semiconductor S500 SoC family. diff --git a/arch/arm/mach-actions/Makefile b/arch/arm/mach-actions/Makefile new file mode 100644 index 000000000000..c0f116241da7 --- /dev/null +++ b/arch/arm/mach-actions/Makefile @@ -0,0 +1,3 @@ +obj-${CONFIG_SMP} += platsmp.o headsmp.o + +AFLAGS_headsmp.o := -Wa,-march=armv7-a diff --git a/arch/arm/mach-actions/headsmp.S b/arch/arm/mach-actions/headsmp.S new file mode 100644 index 000000000000..65f53bdb69e7 --- /dev/null +++ b/arch/arm/mach-actions/headsmp.S @@ -0,0 +1,52 @@ +/* + * Copyright 2012 Actions Semi Inc. + * Author: Actions Semi, Inc. + * + * Copyright (c) 2017 Andreas Färber + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/linkage.h> +#include <linux/init.h> + +ENTRY(owl_v7_invalidate_l1) + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache + mcr p15, 2, r0, c0, c0, 0 + mrc p15, 1, r0, c0, c0, 0 + + ldr r1, =0x7fff + and r2, r1, r0, lsr #13 + + ldr r1, =0x3ff + + and r3, r1, r0, lsr #3 @ NumWays - 1 + add r2, r2, #1 @ NumSets + + and r0, r0, #0x7 + add r0, r0, #4 @ SetShift + + clz r1, r3 @ WayShift + add r4, r3, #1 @ NumWays +1: sub r2, r2, #1 @ NumSets-- + mov r3, r4 @ Temp = NumWays +2: subs r3, r3, #1 @ Temp-- + mov r5, r3, lsl r1 + mov r6, r2, lsl r0 + orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift) + mcr p15, 0, r5, c7, c6, 2 + bgt 2b + cmp r2, #0 + bgt 1b + dsb + isb + mov pc, lr +ENDPROC(owl_v7_invalidate_l1) + +ENTRY(owl_secondary_startup) + bl owl_v7_invalidate_l1 + b secondary_startup diff --git a/arch/arm/mach-actions/platsmp.c b/arch/arm/mach-actions/platsmp.c new file mode 100644 index 000000000000..12a9e331b432 --- /dev/null +++ b/arch/arm/mach-actions/platsmp.c @@ -0,0 +1,171 @@ +/* + * Actions Semi Leopard + * + * This file is based on arm realview smp platform. + * + * Copyright 2012 Actions Semi Inc. + * Author: Actions Semi, Inc. + * + * Copyright (c) 2017 Andreas Färber + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/smp.h> +#include <linux/soc/actions/owl-sps.h> +#include <asm/cacheflush.h> +#include <asm/smp_plat.h> +#include <asm/smp_scu.h> + +#define OWL_CPU1_ADDR 0x50 +#define OWL_CPU1_FLAG 0x5c + +#define OWL_CPUx_FLAG_BOOT 0x55aa + +#define OWL_SPS_PG_CTL_PWR_CPU2 BIT(5) +#define OWL_SPS_PG_CTL_PWR_CPU3 BIT(6) +#define OWL_SPS_PG_CTL_ACK_CPU2 BIT(21) +#define OWL_SPS_PG_CTL_ACK_CPU3 BIT(22) + +static void __iomem *scu_base_addr; +static void __iomem *sps_base_addr; +static void __iomem *timer_base_addr; +static int ncores; + +static DEFINE_SPINLOCK(boot_lock); + +void owl_secondary_startup(void); + +static int s500_wakeup_secondary(unsigned int cpu) +{ + int ret; + + if (cpu > 3) + return -EINVAL; + + /* The generic PM domain driver is not available this early. */ + switch (cpu) { + case 2: + ret = owl_sps_set_pg(sps_base_addr, + OWL_SPS_PG_CTL_PWR_CPU2, + OWL_SPS_PG_CTL_ACK_CPU2, true); + if (ret) + return ret; + break; + case 3: + ret = owl_sps_set_pg(sps_base_addr, + OWL_SPS_PG_CTL_PWR_CPU3, + OWL_SPS_PG_CTL_ACK_CPU3, true); + if (ret) + return ret; + break; + } + + /* wait for CPUx to run to WFE instruction */ + udelay(200); + + writel(virt_to_phys(owl_secondary_startup), + timer_base_addr + OWL_CPU1_ADDR + (cpu - 1) * 4); + writel(OWL_CPUx_FLAG_BOOT, + timer_base_addr + OWL_CPU1_FLAG + (cpu - 1) * 4); + + dsb_sev(); + mb(); + + return 0; +} + +static int s500_smp_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + int ret; + + ret = s500_wakeup_secondary(cpu); + if (ret) + return ret; + + udelay(10); + + spin_lock(&boot_lock); + + smp_send_reschedule(cpu); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) { + if (pen_release == -1) + break; + } + + writel(0, timer_base_addr + OWL_CPU1_ADDR + (cpu - 1) * 4); + writel(0, timer_base_addr + OWL_CPU1_FLAG + (cpu - 1) * 4); + + spin_unlock(&boot_lock); + + return 0; +} + +static void __init s500_smp_prepare_cpus(unsigned int max_cpus) +{ + struct device_node *node; + + node = of_find_compatible_node(NULL, NULL, "actions,s500-timer"); + if (!node) { + pr_err("%s: missing timer\n", __func__); + return; + } + + timer_base_addr = of_iomap(node, 0); + if (!timer_base_addr) { + pr_err("%s: could not map timer registers\n", __func__); + return; + } + + node = of_find_compatible_node(NULL, NULL, "actions,s500-sps"); + if (!node) { + pr_err("%s: missing sps\n", __func__); + return; + } + + sps_base_addr = of_iomap(node, 0); + if (!sps_base_addr) { + pr_err("%s: could not map sps registers\n", __func__); + return; + } + + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) { + node = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); + if (!node) { + pr_err("%s: missing scu\n", __func__); + return; + } + + scu_base_addr = of_iomap(node, 0); + if (!scu_base_addr) { + pr_err("%s: could not map scu registers\n", __func__); + return; + } + + /* + * While the number of cpus is gathered from dt, also get the + * number of cores from the scu to verify this value when + * booting the cores. + */ + ncores = scu_get_core_count(scu_base_addr); + pr_debug("%s: ncores %d\n", __func__, ncores); + + scu_enable(scu_base_addr); + } +} + +static const struct smp_operations s500_smp_ops __initconst = { + .smp_prepare_cpus = s500_smp_prepare_cpus, + .smp_boot_secondary = s500_smp_boot_secondary, +}; +CPU_METHOD_OF_DECLARE(s500_smp, "actions,s500-smp", &s500_smp_ops); diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig index f3f8c5c658db..2d5570e6e186 100644 --- a/arch/arm/mach-aspeed/Kconfig +++ b/arch/arm/mach-aspeed/Kconfig @@ -4,7 +4,7 @@ menuconfig ARCH_ASPEED select SRAM select WATCHDOG select ASPEED_WATCHDOG - select MOXART_TIMER + select FTTMR010_TIMER select MFD_SYSCON select PINCTRL help diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 841e924143f9..d735e5fc4772 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -1,12 +1,21 @@ menuconfig ARCH_AT91 bool "Atmel SoCs" - depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7 + depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M + select ARM_CPU_SUSPEND if PM select COMMON_CLK_AT91 select GPIOLIB select PINCTRL select SOC_BUS if ARCH_AT91 +config SOC_SAMV7 + bool "SAM Cortex-M7 family" if ARM_SINGLE_ARMV7M + select COMMON_CLK_AT91 + select PINCTRL_AT91 + help + Select this if you are using an SoC from Atmel's SAME7, SAMS7 or SAMV7 + families. + config SOC_SAMA5D2 bool "SAMA5D2 family" depends on ARCH_MULTI_V7 @@ -52,6 +61,7 @@ config SOC_AT91RM9200 bool "AT91RM9200" depends on ARCH_MULTI_V4T select ATMEL_AIC_IRQ + select ATMEL_PM if PM select ATMEL_ST select CPU_ARM920T select HAVE_AT91_USB_CLK @@ -65,6 +75,7 @@ config SOC_AT91SAM9 bool "AT91SAM9" depends on ARCH_MULTI_V5 select ATMEL_AIC_IRQ + select ATMEL_PM if PM select ATMEL_SDRAMC select CPU_ARM926T select HAVE_AT91_SMD @@ -123,9 +134,13 @@ config SOC_SAM_V7 config SOC_SAMA5 bool select ATMEL_AIC5_IRQ + select ATMEL_PM if PM select ATMEL_SDRAMC select MEMORY select SOC_SAM_V7 select SRAM if PM +config ATMEL_PM + bool + endif diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index cfd8f60a9268..ee34aa34cc51 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -6,10 +6,10 @@ obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o obj-$(CONFIG_SOC_AT91SAM9) += at91sam9.o obj-$(CONFIG_SOC_SAMA5) += sama5.o +obj-$(CONFIG_SOC_SAMV7) += samv7.o # Power Management -obj-$(CONFIG_PM) += pm.o -obj-$(CONFIG_PM) += pm_suspend.o +obj-$(CONFIG_ATMEL_PM) += pm.o pm_suspend.o ifeq ($(CONFIG_CPU_V7),y) AFLAGS_pm_suspend.o := -march=armv7-a diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot new file mode 100644 index 000000000000..eacfc3f5c33e --- /dev/null +++ b/arch/arm/mach-at91/Makefile.boot @@ -0,0 +1,3 @@ +# Empty file waiting for deletion once Makefile.boot isn't needed any more. +# Patch waits for application at +# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 . diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index f1ead0f13c19..e2bd17237964 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -15,10 +15,12 @@ extern void __init at91rm9200_pm_init(void); extern void __init at91sam9_pm_init(void); extern void __init sama5_pm_init(void); +extern void __init sama5d2_pm_init(void); #else static inline void __init at91rm9200_pm_init(void) { } static inline void __init at91sam9_pm_init(void) { } static inline void __init sama5_pm_init(void) { } +static inline void __init sama5d2_pm_init(void) { } #endif #endif /* _AT91_GENERIC_H */ diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 283e79ab587d..667fddac3856 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -15,6 +15,7 @@ #include <linux/of_address.h> #include <linux/of.h> #include <linux/of_platform.h> +#include <linux/parser.h> #include <linux/suspend.h> #include <linux/clk/at91_pmc.h> @@ -22,6 +23,7 @@ #include <asm/cacheflush.h> #include <asm/fncpy.h> #include <asm/system_misc.h> +#include <asm/suspend.h> #include "generic.h" #include "pm.h" @@ -37,7 +39,17 @@ extern void at91_pinctrl_gpio_suspend(void); extern void at91_pinctrl_gpio_resume(void); #endif -static struct at91_pm_data pm_data; +static const match_table_t pm_modes __initconst = { + { 0, "standby" }, + { AT91_PM_SLOW_CLOCK, "ulp0" }, + { AT91_PM_BACKUP, "backup" }, + { -1, NULL }, +}; + +static struct at91_pm_data pm_data = { + .standby_mode = 0, + .suspend_mode = AT91_PM_SLOW_CLOCK, +}; #define at91_ramc_read(id, field) \ __raw_readl(pm_data.ramc[id] + field) @@ -58,15 +70,33 @@ static int at91_pm_valid_state(suspend_state_t state) } } +static int canary = 0xA5A5A5A5; -static suspend_state_t target_state; +static struct at91_pm_bu { + int suspended; + unsigned long reserved; + phys_addr_t canary; + phys_addr_t resume; +} *pm_bu; /* * Called after processes are frozen, but before we shutdown devices. */ static int at91_pm_begin(suspend_state_t state) { - target_state = state; + switch (state) { + case PM_SUSPEND_MEM: + pm_data.mode = pm_data.suspend_mode; + break; + + case PM_SUSPEND_STANDBY: + pm_data.mode = pm_data.standby_mode; + break; + + default: + pm_data.mode = -1; + } + return 0; } @@ -115,7 +145,7 @@ static int at91_pm_verify_clocks(void) */ int at91_suspend_entering_slow_clock(void) { - return (target_state == PM_SUSPEND_MEM); + return (pm_data.mode >= AT91_PM_SLOW_CLOCK); } EXPORT_SYMBOL(at91_suspend_entering_slow_clock); @@ -123,50 +153,65 @@ static void (*at91_suspend_sram_fn)(struct at91_pm_data *); extern void at91_pm_suspend_in_sram(struct at91_pm_data *pm_data); extern u32 at91_pm_suspend_in_sram_sz; -static void at91_pm_suspend(suspend_state_t state) +static int at91_suspend_finish(unsigned long val) { - pm_data.mode = (state == PM_SUSPEND_MEM) ? AT91_PM_SLOW_CLOCK : 0; - flush_cache_all(); outer_disable(); at91_suspend_sram_fn(&pm_data); + return 0; +} + +static void at91_pm_suspend(suspend_state_t state) +{ + if (pm_data.mode == AT91_PM_BACKUP) { + pm_bu->suspended = 1; + + cpu_suspend(0, at91_suspend_finish); + + /* The SRAM is lost between suspend cycles */ + at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn, + &at91_pm_suspend_in_sram, + at91_pm_suspend_in_sram_sz); + } else { + at91_suspend_finish(0); + } + outer_resume(); } +/* + * STANDBY mode has *all* drivers suspended; ignores irqs not marked as 'wakeup' + * event sources; and reduces DRAM power. But otherwise it's identical to + * PM_SUSPEND_ON: cpu idle, and nothing fancy done with main or cpu clocks. + * + * AT91_PM_SLOW_CLOCK is like STANDBY plus slow clock mode, so drivers must + * suspend more deeply, the master clock switches to the clk32k and turns off + * the main oscillator + * + * AT91_PM_BACKUP turns off the whole SoC after placing the DDR in self refresh + */ static int at91_pm_enter(suspend_state_t state) { #ifdef CONFIG_PINCTRL_AT91 at91_pinctrl_gpio_suspend(); #endif + switch (state) { - /* - * Suspend-to-RAM is like STANDBY plus slow clock mode, so - * drivers must suspend more deeply, the master clock switches - * to the clk32k and turns off the main oscillator - */ case PM_SUSPEND_MEM: + case PM_SUSPEND_STANDBY: /* * Ensure that clocks are in a valid state. */ - if (!at91_pm_verify_clocks()) + if ((pm_data.mode >= AT91_PM_SLOW_CLOCK) && + !at91_pm_verify_clocks()) goto error; at91_pm_suspend(state); break; - /* - * STANDBY mode has *all* drivers suspended; ignores irqs not - * marked as 'wakeup' event sources; and reduces DRAM power. - * But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and - * nothing fancy done with main or cpu clocks. - */ - case PM_SUSPEND_STANDBY: - at91_pm_suspend(state); - break; - case PM_SUSPEND_ON: cpu_do_idle(); break; @@ -177,8 +222,6 @@ static int at91_pm_enter(suspend_state_t state) } error: - target_state = PM_SUSPEND_ON; - #ifdef CONFIG_PINCTRL_AT91 at91_pinctrl_gpio_resume(); #endif @@ -190,7 +233,6 @@ error: */ static void at91_pm_end(void) { - target_state = PM_SUSPEND_ON; } @@ -436,6 +478,79 @@ static void __init at91_pm_sram_init(void) &at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz); } +static void __init at91_pm_backup_init(void) +{ + struct gen_pool *sram_pool; + struct device_node *np; + struct platform_device *pdev = NULL; + + if ((pm_data.standby_mode != AT91_PM_BACKUP) && + (pm_data.suspend_mode != AT91_PM_BACKUP)) + return; + + pm_bu = NULL; + + np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-shdwc"); + if (!np) { + pr_warn("%s: failed to find shdwc!\n", __func__); + return; + } + + pm_data.shdwc = of_iomap(np, 0); + of_node_put(np); + + np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-sfrbu"); + if (!np) { + pr_warn("%s: failed to find sfrbu!\n", __func__); + goto sfrbu_fail; + } + + pm_data.sfrbu = of_iomap(np, 0); + of_node_put(np); + pm_bu = NULL; + + np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-securam"); + if (!np) + goto securam_fail; + + pdev = of_find_device_by_node(np); + of_node_put(np); + if (!pdev) { + pr_warn("%s: failed to find securam device!\n", __func__); + goto securam_fail; + } + + sram_pool = gen_pool_get(&pdev->dev, NULL); + if (!sram_pool) { + pr_warn("%s: securam pool unavailable!\n", __func__); + goto securam_fail; + } + + pm_bu = (void *)gen_pool_alloc(sram_pool, sizeof(struct at91_pm_bu)); + if (!pm_bu) { + pr_warn("%s: unable to alloc securam!\n", __func__); + goto securam_fail; + } + + pm_bu->suspended = 0; + pm_bu->canary = virt_to_phys(&canary); + pm_bu->resume = virt_to_phys(cpu_resume); + + return; + +sfrbu_fail: + iounmap(pm_data.shdwc); + pm_data.shdwc = NULL; +securam_fail: + iounmap(pm_data.sfrbu); + pm_data.sfrbu = NULL; + + if (pm_data.standby_mode == AT91_PM_BACKUP) + pm_data.standby_mode = AT91_PM_SLOW_CLOCK; + if (pm_data.suspend_mode == AT91_PM_BACKUP) + pm_data.suspend_mode = AT91_PM_SLOW_CLOCK; +} + struct pmc_info { unsigned long uhp_udp_mask; }; @@ -481,10 +596,14 @@ static void __init at91_pm_init(void (*pm_idle)(void)) at91_pm_sram_init(); - if (at91_suspend_sram_fn) + if (at91_suspend_sram_fn) { suspend_set_ops(&at91_pm_ops); - else + pr_info("AT91: PM: standby: %s, suspend: %s\n", + pm_modes[pm_data.standby_mode].pattern, + pm_modes[pm_data.suspend_mode].pattern); + } else { pr_info("AT91: PM not supported, due to no SRAM allocated\n"); + } } void __init at91rm9200_pm_init(void) @@ -510,3 +629,34 @@ void __init sama5_pm_init(void) at91_dt_ramc(); at91_pm_init(NULL); } + +void __init sama5d2_pm_init(void) +{ + at91_pm_backup_init(); + sama5_pm_init(); +} + +static int __init at91_pm_modes_select(char *str) +{ + char *s; + substring_t args[MAX_OPT_ARGS]; + int standby, suspend; + + if (!str) + return 0; + + s = strsep(&str, ","); + standby = match_token(s, pm_modes, args); + if (standby < 0) + return 0; + + suspend = match_token(str, pm_modes, args); + if (suspend < 0) + return 0; + + pm_data.standby_mode = standby; + pm_data.suspend_mode = suspend; + + return 0; +} +early_param("atmel.pm_modes", at91_pm_modes_select); diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index fc0f7d048187..f95d31496f08 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -22,6 +22,7 @@ #define AT91_MEMCTRL_DDRSDR 2 #define AT91_PM_SLOW_CLOCK 0x01 +#define AT91_PM_BACKUP 0x02 #ifndef __ASSEMBLY__ struct at91_pm_data { @@ -30,6 +31,10 @@ struct at91_pm_data { unsigned long uhp_udp_mask; unsigned int memctrl; unsigned int mode; + void __iomem *shdwc; + void __iomem *sfrbu; + unsigned int standby_mode; + unsigned int suspend_mode; }; #endif diff --git a/arch/arm/mach-at91/pm_data-offsets.c b/arch/arm/mach-at91/pm_data-offsets.c index 30302cb16df0..c0a73e62b725 100644 --- a/arch/arm/mach-at91/pm_data-offsets.c +++ b/arch/arm/mach-at91/pm_data-offsets.c @@ -9,5 +9,8 @@ int main(void) DEFINE(PM_DATA_RAMC1, offsetof(struct at91_pm_data, ramc[1])); DEFINE(PM_DATA_MEMCTRL, offsetof(struct at91_pm_data, memctrl)); DEFINE(PM_DATA_MODE, offsetof(struct at91_pm_data, mode)); + DEFINE(PM_DATA_SHDWC, offsetof(struct at91_pm_data, shdwc)); + DEFINE(PM_DATA_SFRBU, offsetof(struct at91_pm_data, sfrbu)); + return 0; } diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index 96781daa671a..daca91feea6a 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -97,15 +97,61 @@ ENTRY(at91_pm_suspend_in_sram) str tmp1, .memtype ldr tmp1, [r0, #PM_DATA_MODE] str tmp1, .pm_mode + /* Both ldrne below are here to preload their address in the TLB */ + ldr tmp1, [r0, #PM_DATA_SHDWC] + str tmp1, .shdwc + cmp tmp1, #0 + ldrne tmp2, [tmp1, #0] + ldr tmp1, [r0, #PM_DATA_SFRBU] + str tmp1, .sfr + cmp tmp1, #0 + ldrne tmp2, [tmp1, #0x10] /* Active the self-refresh mode */ mov r0, #SRAMC_SELF_FRESH_ACTIVE bl at91_sramc_self_refresh ldr r0, .pm_mode - tst r0, #AT91_PM_SLOW_CLOCK - beq skip_disable_main_clock + cmp r0, #AT91_PM_SLOW_CLOCK + beq slow_clock + cmp r0, #AT91_PM_BACKUP + beq backup_mode + /* Wait for interrupt */ + ldr pmc, .pmc_base + at91_cpu_idle + b exit_suspend + +slow_clock: + bl at91_slowck_mode + b exit_suspend +backup_mode: + bl at91_backup_mode + b exit_suspend + +exit_suspend: + /* Exit the self-refresh mode */ + mov r0, #SRAMC_SELF_FRESH_EXIT + bl at91_sramc_self_refresh + + /* Restore registers, and return */ + ldmfd sp!, {r4 - r12, pc} +ENDPROC(at91_pm_suspend_in_sram) + +ENTRY(at91_backup_mode) + /*BUMEN*/ + ldr r0, .sfr + mov tmp1, #0x1 + str tmp1, [r0, #0x10] + + /* Shutdown */ + ldr r0, .shdwc + mov tmp1, #0xA5000000 + add tmp1, tmp1, #0x1 + str tmp1, [r0, #0] +ENDPROC(at91_backup_mode) + +ENTRY(at91_slowck_mode) ldr pmc, .pmc_base /* Save Master clock setting */ @@ -134,18 +180,9 @@ ENTRY(at91_pm_suspend_in_sram) orr tmp1, tmp1, #AT91_PMC_KEY str tmp1, [pmc, #AT91_CKGR_MOR] -skip_disable_main_clock: - ldr pmc, .pmc_base - /* Wait for interrupt */ at91_cpu_idle - ldr r0, .pm_mode - tst r0, #AT91_PM_SLOW_CLOCK - beq skip_enable_main_clock - - ldr pmc, .pmc_base - /* Turn on the main oscillator */ ldr tmp1, [pmc, #AT91_CKGR_MOR] orr tmp1, tmp1, #AT91_PMC_MOSCEN @@ -174,14 +211,8 @@ skip_disable_main_clock: wait_mckrdy -skip_enable_main_clock: - /* Exit the self-refresh mode */ - mov r0, #SRAMC_SELF_FRESH_EXIT - bl at91_sramc_self_refresh - - /* Restore registers, and return */ - ldmfd sp!, {r4 - r12, pc} -ENDPROC(at91_pm_suspend_in_sram) + mov pc, lr +ENDPROC(at91_slowck_mode) /* * void at91_sramc_self_refresh(unsigned int is_active) @@ -314,6 +345,10 @@ ENDPROC(at91_sramc_self_refresh) .word 0 .sramc1_base: .word 0 +.shdwc: + .word 0 +.sfr: + .word 0 .memtype: .word 0 .pm_mode: diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c index 6d157d0ead8e..3d0bf95a56ae 100644 --- a/arch/arm/mach-at91/sama5.c +++ b/arch/arm/mach-at91/sama5.c @@ -34,7 +34,6 @@ DT_MACHINE_START(sama5_dt, "Atmel SAMA5") MACHINE_END static const char *const sama5_alt_dt_board_compat[] __initconst = { - "atmel,sama5d2", "atmel,sama5d4", NULL }; @@ -45,3 +44,21 @@ DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5") .dt_compat = sama5_alt_dt_board_compat, .l2c_aux_mask = ~0UL, MACHINE_END + +static void __init sama5d2_init(void) +{ + of_platform_default_populate(NULL, NULL, NULL); + sama5d2_pm_init(); +} + +static const char *const sama5d2_compat[] __initconst = { + "atmel,sama5d2", + NULL +}; + +DT_MACHINE_START(sama5d2, "Atmel SAMA5") + /* Maintainer: Atmel */ + .init_machine = sama5d2_init, + .dt_compat = sama5d2_compat, + .l2c_aux_mask = ~0UL, +MACHINE_END diff --git a/arch/arm/mach-at91/samv7.c b/arch/arm/mach-at91/samv7.c new file mode 100644 index 000000000000..11386f190c83 --- /dev/null +++ b/arch/arm/mach-at91/samv7.c @@ -0,0 +1,25 @@ +/* + * Setup code for SAMv7x + * + * Copyright (C) 2013 Atmel, + * 2016 Andras Szemzo <szemzo.andras@gmail.com> + * + * Licensed under GPLv2 or later. + */ +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> +#include <linux/slab.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/system_misc.h> +#include "generic.h" + +static const char *const samv7_dt_board_compat[] __initconst = { + "atmel,samv7", + NULL +}; + +DT_MACHINE_START(samv7_dt, "Atmel SAMV7") + .dt_compat = samv7_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index f9389c5910e7..73be3d578851 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -44,6 +44,8 @@ config ARCH_BCM_NSP select ARM_ERRATA_775420 select ARM_ERRATA_764369 if SMP select HAVE_SMP + select THERMAL + select THERMAL_OF help Support for Broadcom Northstar Plus SoC. Broadcom Northstar Plus family of SoCs are used for switching control @@ -150,7 +152,7 @@ config ARCH_BCM2835 select ARM_ERRATA_411920 if ARCH_MULTI_V6 select ARM_TIMER_SP804 select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7 - select CLKSRC_OF + select TIMER_OF select BCM2835_TIMER select PINCTRL select PINCTRL_BCM2835 diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index 61284b9389cf..f385b1fcafef 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -2,7 +2,7 @@ menuconfig ARCH_CLPS711X bool "Cirrus Logic EP721x/EP731x-based" depends on ARCH_MULTI_V4T select AUTO_ZRELADDR - select CLKSRC_OF + select TIMER_OF select CLPS711X_TIMER select COMMON_CLK select CPU_ARM720T diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 58075627c6df..f673cd7a6766 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -17,7 +17,7 @@ #include <linux/gpio/machine.h> #include <linux/platform_device.h> #include <linux/i2c.h> -#include <linux/i2c/pcf857x.h> +#include <linux/platform_data/pcf857x.h> #include <linux/platform_data/at24.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 20f1874a5657..70e00dbeec96 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -14,7 +14,7 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/i2c.h> -#include <linux/i2c/pcf857x.h> +#include <linux/platform_data/pcf857x.h> #include <linux/platform_data/at24.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index cb176826d1cb..1d76e7480a42 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -23,7 +23,7 @@ #include <linux/platform_device.h> #include <linux/i2c.h> #include <linux/platform_data/at24.h> -#include <linux/i2c/pcf857x.h> +#include <linux/platform_data/pcf857x.h> #include <media/i2c/tvp514x.h> #include <media/i2c/adv7343.h> @@ -641,7 +641,7 @@ static struct vpif_subdev_info vpif_capture_sdev_info[] = { }, }; -static const struct vpif_input dm6467_ch0_inputs[] = { +static struct vpif_input dm6467_ch0_inputs[] = { { .input = { .index = 0, @@ -656,7 +656,7 @@ static const struct vpif_input dm6467_ch0_inputs[] = { }, }; -static const struct vpif_input dm6467_ch1_inputs[] = { +static struct vpif_input dm6467_ch1_inputs[] = { { .input = { .index = 0, diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 7cf529ffbe5a..22440c05d66a 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -789,15 +789,35 @@ int __init da850_register_mmcsd1(struct davinci_mmc_config *config) static struct resource da8xx_rproc_resources[] = { { /* DSP boot address */ + .name = "host1cfg", .start = DA8XX_SYSCFG0_BASE + DA8XX_HOST1CFG_REG, .end = DA8XX_SYSCFG0_BASE + DA8XX_HOST1CFG_REG + 3, .flags = IORESOURCE_MEM, }, { /* DSP interrupt registers */ + .name = "chipsig", .start = DA8XX_SYSCFG0_BASE + DA8XX_CHIPSIG_REG, .end = DA8XX_SYSCFG0_BASE + DA8XX_CHIPSIG_REG + 7, .flags = IORESOURCE_MEM, }, + { /* DSP L2 RAM */ + .name = "l2sram", + .start = DA8XX_DSP_L2_RAM_BASE, + .end = DA8XX_DSP_L2_RAM_BASE + SZ_256K - 1, + .flags = IORESOURCE_MEM, + }, + { /* DSP L1P RAM */ + .name = "l1pram", + .start = DA8XX_DSP_L1P_RAM_BASE, + .end = DA8XX_DSP_L1P_RAM_BASE + SZ_32K - 1, + .flags = IORESOURCE_MEM, + }, + { /* DSP L1D RAM */ + .name = "l1dram", + .start = DA8XX_DSP_L1D_RAM_BASE, + .end = DA8XX_DSP_L1D_RAM_BASE + SZ_32K - 1, + .flags = IORESOURCE_MEM, + }, { /* dsp irq */ .start = IRQ_DA8XX_CHIPINT0, .end = IRQ_DA8XX_CHIPINT0, @@ -814,6 +834,8 @@ static struct platform_device da8xx_dsp = { .resource = da8xx_rproc_resources, }; +static bool rproc_mem_inited __initdata; + #if IS_ENABLED(CONFIG_DA8XX_REMOTEPROC) static phys_addr_t rproc_base __initdata; @@ -852,6 +874,8 @@ void __init da8xx_rproc_reserve_cma(void) ret = dma_declare_contiguous(&da8xx_dsp.dev, rproc_size, rproc_base, 0); if (ret) pr_err("%s: dma_declare_contiguous failed %d\n", __func__, ret); + else + rproc_mem_inited = true; } #else @@ -866,6 +890,12 @@ int __init da8xx_register_rproc(void) { int ret; + if (!rproc_mem_inited) { + pr_warn("%s: memory not reserved for DSP, not registering DSP device\n", + __func__); + return -ENOMEM; + } + ret = platform_device_register(&da8xx_dsp); if (ret) pr_err("%s: can't register DSP device: %d\n", __func__, ret); diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 7e464228948b..93ff1569cee5 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -75,6 +75,11 @@ extern unsigned int da850_max_speed; #define DA8XX_VPIF_BASE 0x01e17000 #define DA8XX_GPIO_BASE 0x01e26000 #define DA8XX_PSC1_BASE 0x01e27000 + +#define DA8XX_DSP_L2_RAM_BASE 0x11800000 +#define DA8XX_DSP_L1P_RAM_BASE (DA8XX_DSP_L2_RAM_BASE + 0x600000) +#define DA8XX_DSP_L1D_RAM_BASE (DA8XX_DSP_L2_RAM_BASE + 0x700000) + #define DA8XX_AEMIF_CS2_BASE 0x60000000 #define DA8XX_AEMIF_CS3_BASE 0x62000000 #define DA8XX_AEMIF_CTL_BASE 0x68000000 diff --git a/arch/arm/mach-davinci/pdata-quirks.c b/arch/arm/mach-davinci/pdata-quirks.c index 329f5402ad1d..4858b1cdf31b 100644 --- a/arch/arm/mach-davinci/pdata-quirks.c +++ b/arch/arm/mach-davinci/pdata-quirks.c @@ -33,7 +33,7 @@ static struct tvp514x_platform_data tvp5146_pdata = { #define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) -static const struct vpif_input da850_ch0_inputs[] = { +static struct vpif_input da850_ch0_inputs[] = { { .input = { .index = 0, @@ -48,7 +48,7 @@ static const struct vpif_input da850_ch0_inputs[] = { }, }; -static const struct vpif_input da850_ch1_inputs[] = { +static struct vpif_input da850_ch1_inputs[] = { { .input = { .index = 0, diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c index efb80354f303..b5cc05dc2cb2 100644 --- a/arch/arm/mach-davinci/pm.c +++ b/arch/arm/mach-davinci/pm.c @@ -153,7 +153,8 @@ int __init davinci_pm_init(void) davinci_sram_suspend = sram_alloc(davinci_cpu_suspend_sz, NULL); if (!davinci_sram_suspend) { pr_err("PM: cannot allocate SRAM memory\n"); - return -ENOMEM; + ret = -ENOMEM; + goto no_sram_mem; } davinci_sram_push(davinci_sram_suspend, davinci_cpu_suspend, @@ -161,6 +162,10 @@ int __init davinci_pm_init(void) suspend_set_ops(&davinci_pm_ops); + return 0; + +no_sram_mem: + iounmap(pm_config.ddrpsc_reg_base); no_ddrpsc_mem: iounmap(pm_config.ddrpll_reg_base); no_ddrpll_mem: diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 936c59d0e18b..782699e67600 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -536,6 +536,7 @@ config SOC_IMX7D select HAVE_IMX_ANATOP select HAVE_IMX_MMDC select HAVE_IMX_SRC + select IMX_GPCV2 help This enables support for Freescale i.MX7 Dual processor. diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index b3347d32349f..94906ed49392 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -131,6 +131,9 @@ struct device * __init imx_soc_device_init(void) case MXC_CPU_IMX6UL: soc_id = "i.MX6UL"; break; + case MXC_CPU_IMX6ULL: + soc_id = "i.MX6ULL"; + break; case MXC_CPU_IMX7D: soc_id = "i.MX7D"; break; diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index 34f2ff62583c..e00d6260c3df 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -39,6 +39,7 @@ #define MXC_CPU_IMX6SX 0x62 #define MXC_CPU_IMX6Q 0x63 #define MXC_CPU_IMX6UL 0x64 +#define MXC_CPU_IMX6ULL 0x65 #define MXC_CPU_IMX7D 0x72 #define IMX_DDR_TYPE_LPDDR2 1 @@ -73,6 +74,11 @@ static inline bool cpu_is_imx6ul(void) return __mxc_cpu_type == MXC_CPU_IMX6UL; } +static inline bool cpu_is_imx6ull(void) +{ + return __mxc_cpu_type == MXC_CPU_IMX6ULL; +} + static inline bool cpu_is_imx6q(void) { return __mxc_cpu_type == MXC_CPU_IMX6Q; diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index e61b1d1027e1..ecdf071653d4 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -295,7 +295,8 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode) val &= ~BM_CLPCR_SBYOS; if (cpu_is_imx6sl()) val |= BM_CLPCR_BYPASS_PMIC_READY; - if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul()) + if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() || + cpu_is_imx6ull()) val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; else val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; @@ -312,7 +313,8 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode) val |= BM_CLPCR_SBYOS; if (cpu_is_imx6sl() || cpu_is_imx6sx()) val |= BM_CLPCR_BYPASS_PMIC_READY; - if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul()) + if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() || + cpu_is_imx6ull()) val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; else val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c index a6e3c98b95ed..c3cf215773b2 100644 --- a/arch/arm/mach-mediatek/mediatek.c +++ b/arch/arm/mach-mediatek/mediatek.c @@ -41,7 +41,7 @@ static void __init mediatek_timer_init(void) } of_clk_init(NULL); - clocksource_probe(); + timer_probe(); }; static const char * const mediatek_board_dt_compat[] = { diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index b6e3acc63e14..ee30511849ca 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -21,6 +21,7 @@ config MACH_MESON8 bool "Amlogic Meson8 SoCs support" default ARCH_MESON select MESON6_TIMER + select COMMON_CLK_MESON8B config MACH_MESON8B bool "Amlogic Meson8b SoCs support" diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig index 70db2abf6163..a4a91f9a3301 100644 --- a/arch/arm/mach-moxart/Kconfig +++ b/arch/arm/mach-moxart/Kconfig @@ -4,7 +4,7 @@ menuconfig ARCH_MOXART select CPU_FA526 select ARM_DMA_MEM_BUFFERABLE select FARADAY_FTINTC010 - select MOXART_TIMER + select FTTMR010_TIMER select GPIOLIB select PHYLIB if NETDEVICES help diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index c821c1d5610e..52d7eda1adec 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -240,7 +240,6 @@ static void omap1_show_dma_caps(void) w |= 1 << 3; dma_write(w, GSCR, 0); } - return; } static unsigned configure_dma_errata(void) @@ -339,10 +338,8 @@ static int __init omap1_system_dma_init(void) goto exit_iounmap; } - d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL); + d = kzalloc(sizeof(*d), GFP_KERNEL); if (!d) { - dev_err(&pdev->dev, "%s: Unable to allocate 'd' for %s\n", - __func__, pdev->name); ret = -ENOMEM; goto exit_iounmap; } diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c index 06c5ba7574a5..8fb1ec6fa999 100644 --- a/arch/arm/mach-omap1/timer.c +++ b/arch/arm/mach-omap1/timer.c @@ -3,7 +3,7 @@ * * Contains first level initialization routines which internally * generates timer device information and registers with linux - * device model. It also has low level function to chnage the timer + * device model. It also has a low level function to change the timer * input clock source. * * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ @@ -134,8 +134,6 @@ static int __init omap1_dm_timer_init(void) pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); if (!pdata) { - dev_err(&pdev->dev, "%s: Failed to allocate pdata.\n", - __func__); ret = -ENOMEM; goto err_free_pdata; } diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index c89757abb0ae..779fb1f680b3 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -69,7 +69,6 @@ obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o # OPP table initialization ifeq ($(CONFIG_PM_OPP),y) -obj-y += opp.o obj-$(CONFIG_ARCH_OMAP3) += opp3xxx_data.o obj-$(CONFIG_ARCH_OMAP4) += opp4xxx_data.o endif @@ -220,9 +219,6 @@ obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o obj-$(CONFIG_SOC_OMAP5) += omap_hwmod_54xx_data.o obj-$(CONFIG_SOC_DRA7XX) += omap_hwmod_7xx_data.o -# EMU peripherals -obj-$(CONFIG_HW_PERF_EVENTS) += pmu.o - # OMAP2420 MSDI controller integration support ("MMC") obj-$(CONFIG_SOC_OMAP2420) += msdi.o diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 91272db09fa3..20f25539d572 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -53,14 +53,12 @@ static u32 board_caps; static void board_check_revision(void) { - if (of_have_populated_dt()) { - if (of_machine_is_compatible("nokia,n800")) - board_caps = NOKIA_N800; - else if (of_machine_is_compatible("nokia,n810")) - board_caps = NOKIA_N810; - else if (of_machine_is_compatible("nokia,n810-wimax")) - board_caps = NOKIA_N810_WIMAX; - } + if (of_machine_is_compatible("nokia,n800")) + board_caps = NOKIA_N800; + else if (of_machine_is_compatible("nokia,n810")) + board_caps = NOKIA_N810; + else if (of_machine_is_compatible("nokia,n810-wimax")) + board_caps = NOKIA_N810_WIMAX; if (!board_caps) pr_err("Unknown board\n"); diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index b79b1ca9aee9..518926410b62 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -1224,6 +1224,14 @@ ccd_exit: return 0; } +u32 clkdm_xlate_address(struct clockdomain *clkdm) +{ + if (arch_clkdm->clkdm_xlate_address) + return arch_clkdm->clkdm_xlate_address(clkdm); + + return 0; +} + /** * clkdm_hwmod_enable - add an enabled downstream hwmod to this clkdm * @clkdm: struct clockdomain * diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 24667a5a9dc0..827f01e2d0af 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -175,6 +175,7 @@ struct clkdm_ops { void (*clkdm_deny_idle)(struct clockdomain *clkdm); int (*clkdm_clk_enable)(struct clockdomain *clkdm); int (*clkdm_clk_disable)(struct clockdomain *clkdm); + u32 (*clkdm_xlate_address)(struct clockdomain *clkdm); }; int clkdm_register_platform_funcs(struct clkdm_ops *co); @@ -213,6 +214,7 @@ int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk); int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk); int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh); int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh); +u32 clkdm_xlate_address(struct clockdomain *clkdm); extern void __init omap242x_clockdomains_init(void); extern void __init omap243x_clockdomains_init(void); diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index de75cbcdc9d1..e833984cc85e 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -24,8 +24,11 @@ # ifndef __ASSEMBLER__ #include <linux/clk/ti.h> -extern void __iomem *cm_base; -extern void __iomem *cm2_base; + +#include "prcm-common.h" + +extern struct omap_domain_base cm_base; +extern struct omap_domain_base cm2_base; extern void omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2); # endif diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.h b/arch/arm/mach-omap2/cm2xxx_3xxx.h index 72928a3ce2aa..aa148cd57cc1 100644 --- a/arch/arm/mach-omap2/cm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/cm2xxx_3xxx.h @@ -52,12 +52,12 @@ static inline u32 omap2_cm_read_mod_reg(s16 module, u16 idx) { - return readl_relaxed(cm_base + module + idx); + return readl_relaxed(cm_base.va + module + idx); } static inline void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx) { - writel_relaxed(val, cm_base + module + idx); + writel_relaxed(val, cm_base.va + module + idx); } /* Read-modify-write a register in a CM module. Caller must lock */ diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c index 6f2d0aec0513..a9e08d89104e 100644 --- a/arch/arm/mach-omap2/cm33xx.c +++ b/arch/arm/mach-omap2/cm33xx.c @@ -50,13 +50,13 @@ /* Read a register in a CM instance */ static inline u32 am33xx_cm_read_reg(u16 inst, u16 idx) { - return readl_relaxed(cm_base + inst + idx); + return readl_relaxed(cm_base.va + inst + idx); } /* Write into a register in a CM */ static inline void am33xx_cm_write_reg(u32 val, u16 inst, u16 idx) { - writel_relaxed(val, cm_base + inst + idx); + writel_relaxed(val, cm_base.va + inst + idx); } /* Read-modify-write a register in CM */ diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c index 55b046a719dc..961bc478b9de 100644 --- a/arch/arm/mach-omap2/cm3xxx.c +++ b/arch/arm/mach-omap2/cm3xxx.c @@ -669,7 +669,8 @@ static struct cm_ll_data omap3xxx_cm_ll_data = { int __init omap3xxx_cm_init(const struct omap_prcm_init_data *data) { - omap2_clk_legacy_provider_init(TI_CLKM_CM, cm_base + OMAP3430_IVA2_MOD); + omap2_clk_legacy_provider_init(TI_CLKM_CM, cm_base.va + + OMAP3430_IVA2_MOD); return cm_register(&omap3xxx_cm_ll_data); } diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c index bbe41f4c9dc8..d555791cf349 100644 --- a/arch/arm/mach-omap2/cm_common.c +++ b/arch/arm/mach-omap2/cm_common.c @@ -32,10 +32,10 @@ static struct cm_ll_data null_cm_ll_data; static struct cm_ll_data *cm_ll_data = &null_cm_ll_data; /* cm_base: base virtual address of the CM IP block */ -void __iomem *cm_base; +struct omap_domain_base cm_base; /* cm2_base: base virtual address of the CM2 IP block (OMAP44xx only) */ -void __iomem *cm2_base; +struct omap_domain_base cm2_base; #define CM_NO_CLOCKS 0x1 #define CM_SINGLE_INSTANCE 0x2 @@ -49,8 +49,8 @@ void __iomem *cm2_base; */ void __init omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2) { - cm_base = cm; - cm2_base = cm2; + cm_base.va = cm; + cm2_base.va = cm2; } /** @@ -315,27 +315,34 @@ int __init omap2_cm_base_init(void) struct device_node *np; const struct of_device_id *match; struct omap_prcm_init_data *data; - void __iomem *mem; + struct resource res; + int ret; + struct omap_domain_base *mem = NULL; for_each_matching_node_and_match(np, omap_cm_dt_match_table, &match) { data = (struct omap_prcm_init_data *)match->data; - mem = of_iomap(np, 0); - if (!mem) - return -ENOMEM; + ret = of_address_to_resource(np, 0, &res); + if (ret) + return ret; if (data->index == TI_CLKM_CM) - cm_base = mem + data->offset; + mem = &cm_base; if (data->index == TI_CLKM_CM2) - cm2_base = mem + data->offset; + mem = &cm2_base; + + data->mem = ioremap(res.start, resource_size(&res)); - data->mem = mem; + if (mem) { + mem->pa = res.start + data->offset; + mem->va = data->mem + data->offset; + } data->np = np; if (data->init && (data->flags & CM_SINGLE_INSTANCE || - (cm_base && cm2_base))) + (cm_base.va && cm2_base.va))) data->init(data); } diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index 2ab27ade136a..8774e983bea1 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -55,7 +55,7 @@ #define CLKCTRL_IDLEST_INTERFACE_IDLE 0x2 #define CLKCTRL_IDLEST_DISABLED 0x3 -static void __iomem *_cm_bases[OMAP4_MAX_PRCM_PARTITIONS]; +static struct omap_domain_base _cm_bases[OMAP4_MAX_PRCM_PARTITIONS]; /** * omap_cm_base_init - Populates the cm partitions @@ -65,10 +65,11 @@ static void __iomem *_cm_bases[OMAP4_MAX_PRCM_PARTITIONS]; */ static void omap_cm_base_init(void) { - _cm_bases[OMAP4430_PRM_PARTITION] = prm_base; - _cm_bases[OMAP4430_CM1_PARTITION] = cm_base; - _cm_bases[OMAP4430_CM2_PARTITION] = cm2_base; - _cm_bases[OMAP4430_PRCM_MPU_PARTITION] = prcm_mpu_base; + memcpy(&_cm_bases[OMAP4430_PRM_PARTITION], &prm_base, sizeof(prm_base)); + memcpy(&_cm_bases[OMAP4430_CM1_PARTITION], &cm_base, sizeof(cm_base)); + memcpy(&_cm_bases[OMAP4430_CM2_PARTITION], &cm2_base, sizeof(cm2_base)); + memcpy(&_cm_bases[OMAP4430_PRCM_MPU_PARTITION], &prcm_mpu_base, + sizeof(prcm_mpu_base)); } /* Private functions */ @@ -116,8 +117,8 @@ static u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx) { BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || part == OMAP4430_INVALID_PRCM_PARTITION || - !_cm_bases[part]); - return readl_relaxed(_cm_bases[part] + inst + idx); + !_cm_bases[part].va); + return readl_relaxed(_cm_bases[part].va + inst + idx); } /* Write into a register in a CM instance */ @@ -125,8 +126,8 @@ static void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx) { BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || part == OMAP4430_INVALID_PRCM_PARTITION || - !_cm_bases[part]); - writel_relaxed(val, _cm_bases[part] + inst + idx); + !_cm_bases[part].va); + writel_relaxed(val, _cm_bases[part].va + inst + idx); } /* Read-modify-write a register in CM1. Caller must lock */ @@ -475,6 +476,14 @@ static int omap4_clkdm_clk_disable(struct clockdomain *clkdm) return 0; } +static u32 omap4_clkdm_xlate_address(struct clockdomain *clkdm) +{ + u32 addr = _cm_bases[clkdm->prcm_partition].pa + clkdm->cm_inst + + clkdm->clkdm_offs; + + return addr; +} + struct clkdm_ops omap4_clkdm_operations = { .clkdm_add_wkdep = omap4_clkdm_add_wkup_sleep_dep, .clkdm_del_wkdep = omap4_clkdm_del_wkup_sleep_dep, @@ -490,6 +499,7 @@ struct clkdm_ops omap4_clkdm_operations = { .clkdm_deny_idle = omap4_clkdm_deny_idle, .clkdm_clk_enable = omap4_clkdm_clk_enable, .clkdm_clk_disable = omap4_clkdm_clk_disable, + .clkdm_xlate_address = omap4_clkdm_xlate_address, }; struct clkdm_ops am43xx_clkdm_operations = { @@ -499,6 +509,7 @@ struct clkdm_ops am43xx_clkdm_operations = { .clkdm_deny_idle = omap4_clkdm_deny_idle, .clkdm_clk_enable = omap4_clkdm_clk_enable, .clkdm_clk_disable = omap4_clkdm_clk_disable, + .clkdm_xlate_address = omap4_clkdm_xlate_address, }; static struct cm_ll_data omap4xxx_cm_ll_data = { diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 473951203104..93057fb65f44 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -36,130 +36,6 @@ #define L3_MODULES_MAX_LEN 12 #define L3_MODULES 3 -static int __init omap3_l3_init(void) -{ - struct omap_hwmod *oh; - struct platform_device *pdev; - char oh_name[L3_MODULES_MAX_LEN]; - - /* - * To avoid code running on other OMAPs in - * multi-omap builds - */ - if (!(cpu_is_omap34xx()) || of_have_populated_dt()) - return -ENODEV; - - snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main"); - - oh = omap_hwmod_lookup(oh_name); - - if (!oh) - pr_err("could not look up %s\n", oh_name); - - pdev = omap_device_build("omap_l3_smx", 0, oh, NULL, 0); - - WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name); - - return PTR_ERR_OR_ZERO(pdev); -} -omap_postcore_initcall(omap3_l3_init); - -static inline void omap_init_sti(void) {} - -#if IS_ENABLED(CONFIG_SPI_OMAP24XX) - -#include <linux/platform_data/spi-omap2-mcspi.h> - -static int __init omap_mcspi_init(struct omap_hwmod *oh, void *unused) -{ - struct platform_device *pdev; - char *name = "omap2_mcspi"; - struct omap2_mcspi_platform_config *pdata; - static int spi_num; - struct omap2_mcspi_dev_attr *mcspi_attrib = oh->dev_attr; - - pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); - if (!pdata) { - pr_err("Memory allocation for McSPI device failed\n"); - return -ENOMEM; - } - - pdata->num_cs = mcspi_attrib->num_chipselect; - switch (oh->class->rev) { - case OMAP2_MCSPI_REV: - case OMAP3_MCSPI_REV: - pdata->regs_offset = 0; - break; - case OMAP4_MCSPI_REV: - pdata->regs_offset = OMAP4_MCSPI_REG_OFFSET; - break; - default: - pr_err("Invalid McSPI Revision value\n"); - kfree(pdata); - return -EINVAL; - } - - spi_num++; - pdev = omap_device_build(name, spi_num, oh, pdata, sizeof(*pdata)); - WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s\n", - name, oh->name); - kfree(pdata); - return 0; -} - -static void omap_init_mcspi(void) -{ - omap_hwmod_for_each_by_class("mcspi", omap_mcspi_init, NULL); -} - -#else -static inline void omap_init_mcspi(void) {} -#endif - -/** - * omap_init_rng - bind the RNG hwmod to the RNG omap_device - * - * Bind the RNG hwmod to the RNG omap_device. No return value. - */ -static void __init omap_init_rng(void) -{ - struct omap_hwmod *oh; - struct platform_device *pdev; - - oh = omap_hwmod_lookup("rng"); - if (!oh) - return; - - pdev = omap_device_build("omap_rng", -1, oh, NULL, 0); - WARN(IS_ERR(pdev), "Can't build omap_device for omap_rng\n"); -} - -static void __init omap_init_sham(void) -{ - struct omap_hwmod *oh; - struct platform_device *pdev; - - oh = omap_hwmod_lookup("sham"); - if (!oh) - return; - - pdev = omap_device_build("omap-sham", -1, oh, NULL, 0); - WARN(IS_ERR(pdev), "Can't build omap_device for omap-sham\n"); -} - -static void __init omap_init_aes(void) -{ - struct omap_hwmod *oh; - struct platform_device *pdev; - - oh = omap_hwmod_lookup("aes"); - if (!oh) - return; - - pdev = omap_device_build("omap-aes", -1, oh, NULL, 0); - WARN(IS_ERR(pdev), "Can't build omap_device for omap-aes\n"); -} - /*-------------------------------------------------------------------------*/ #if IS_ENABLED(CONFIG_VIDEO_OMAP2_VOUT) @@ -185,54 +61,3 @@ int __init omap_init_vout(void) #else int __init omap_init_vout(void) { return 0; } #endif - -/*-------------------------------------------------------------------------*/ - -static int __init omap2_init_devices(void) -{ - /* Enable dummy states for those platforms without pinctrl support */ - if (!of_have_populated_dt()) - pinctrl_provide_dummies(); - - /* If dtb is there, the devices will be created dynamically */ - if (!of_have_populated_dt()) { - /* - * please keep these calls, and their implementations above, - * in alphabetical order so they're easier to sort through. - */ - omap_init_mcspi(); - omap_init_sham(); - omap_init_aes(); - omap_init_rng(); - } - omap_init_sti(); - - return 0; -} -omap_arch_initcall(omap2_init_devices); - -static int __init omap_gpmc_init(void) -{ - struct omap_hwmod *oh; - struct platform_device *pdev; - char *oh_name = "gpmc"; - - /* - * if the board boots up with a populated DT, do not - * manually add the device from this initcall - */ - if (of_have_populated_dt()) - return -ENODEV; - - oh = omap_hwmod_lookup(oh_name); - if (!oh) { - pr_err("Could not look up %s\n", oh_name); - return -ENODEV; - } - - pdev = omap_device_build("omap-gpmc", -1, oh, NULL, 0); - WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name); - - return PTR_ERR_OR_ZERO(pdev); -} -omap_postcore_initcall(omap_gpmc_init); diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index e58c13a9bea5..0b77a0176018 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -249,6 +249,24 @@ static const struct dma_slave_map omap24xx_sdma_map[] = { { "omap_uart.2", "rx", SDMA_FILTER_PARAM(54) }, { "omap_hsmmc.0", "tx", SDMA_FILTER_PARAM(61) }, { "omap_hsmmc.0", "rx", SDMA_FILTER_PARAM(62) }, + + /* external DMA requests when tusb6010 is used */ + { "musb-tusb", "dmareq0", SDMA_FILTER_PARAM(2) }, + { "musb-tusb", "dmareq1", SDMA_FILTER_PARAM(3) }, + { "musb-tusb", "dmareq2", SDMA_FILTER_PARAM(14) }, /* OMAP2420 only */ + { "musb-tusb", "dmareq3", SDMA_FILTER_PARAM(15) }, /* OMAP2420 only */ + { "musb-tusb", "dmareq4", SDMA_FILTER_PARAM(16) }, /* OMAP2420 only */ + { "musb-tusb", "dmareq5", SDMA_FILTER_PARAM(64) }, /* OMAP2420 only */ +}; + +static const struct dma_slave_map omap24xx_sdma_dt_map[] = { + /* external DMA requests when tusb6010 is used */ + { "musb-hdrc.1.auto", "dmareq0", SDMA_FILTER_PARAM(2) }, + { "musb-hdrc.1.auto", "dmareq1", SDMA_FILTER_PARAM(3) }, + { "musb-hdrc.1.auto", "dmareq2", SDMA_FILTER_PARAM(14) }, /* OMAP2420 only */ + { "musb-hdrc.1.auto", "dmareq3", SDMA_FILTER_PARAM(15) }, /* OMAP2420 only */ + { "musb-hdrc.1.auto", "dmareq4", SDMA_FILTER_PARAM(16) }, /* OMAP2420 only */ + { "musb-hdrc.1.auto", "dmareq5", SDMA_FILTER_PARAM(64) }, /* OMAP2420 only */ }; static const struct dma_slave_map omap3xxx_sdma_map[] = { @@ -346,6 +364,12 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) __func__); return -ENODEV; } + } else { + if (soc_is_omap24xx()) { + /* DMA slave map for drivers not yet converted to DT */ + p.slave_map = omap24xx_sdma_dt_map; + p.slavecnt = ARRAY_SIZE(omap24xx_sdma_dt_map); + } } pdev = omap_device_build(name, 0, oh, &p, sizeof(p)); diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index cb754c46747e..be517b048762 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -153,7 +153,6 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, hc_name = kzalloc(sizeof(char) * (HSMMC_NAME_LEN + 1), GFP_KERNEL); if (!hc_name) { - pr_err("Cannot allocate memory for controller slot name\n"); kfree(hc_name); return -ENOMEM; } @@ -315,10 +314,8 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo, int res; mmc_data = kzalloc(sizeof(*mmc_data), GFP_KERNEL); - if (!mmc_data) { - pr_err("Cannot allocate memory for mmc device!\n"); + if (!mmc_data) return; - } res = omap_hsmmc_pdata_init(hsmmcinfo, mmc_data); if (res < 0) diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 5aafb8449c40..1d739d1a0a65 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -493,67 +493,39 @@ void __init omap3_init_early(void) omap2_set_globals_tap(OMAP343X_CLASS, OMAP2_L4_IO_ADDRESS(0x4830A000)); omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE), OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE)); - /* XXX: remove these once OMAP3 is DT only */ - if (!of_have_populated_dt()) { - omap2_set_globals_control( - OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE)); - omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE)); - omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), - NULL); - } omap2_control_base_init(); omap3xxx_check_revision(); omap3xxx_check_features(); omap2_prcm_base_init(); - /* XXX: remove these once OMAP3 is DT only */ - if (!of_have_populated_dt()) { - omap3xxx_prm_init(NULL); - omap3xxx_cm_init(NULL); - } omap3xxx_voltagedomains_init(); omap3xxx_powerdomains_init(); omap3xxx_clockdomains_init(); omap3xxx_hwmod_init(); omap_hwmod_init_postsetup(); - if (!of_have_populated_dt()) { - omap3_control_legacy_iomap_init(); - if (soc_is_am35xx()) - omap_clk_soc_init = am35xx_clk_legacy_init; - else if (cpu_is_omap3630()) - omap_clk_soc_init = omap36xx_clk_legacy_init; - else if (omap_rev() == OMAP3430_REV_ES1_0) - omap_clk_soc_init = omap3430es1_clk_legacy_init; - else - omap_clk_soc_init = omap3430_clk_legacy_init; - } } void __init omap3430_init_early(void) { omap3_init_early(); - if (of_have_populated_dt()) - omap_clk_soc_init = omap3430_dt_clk_init; + omap_clk_soc_init = omap3430_dt_clk_init; } void __init omap35xx_init_early(void) { omap3_init_early(); - if (of_have_populated_dt()) - omap_clk_soc_init = omap3430_dt_clk_init; + omap_clk_soc_init = omap3430_dt_clk_init; } void __init omap3630_init_early(void) { omap3_init_early(); - if (of_have_populated_dt()) - omap_clk_soc_init = omap3630_dt_clk_init; + omap_clk_soc_init = omap3630_dt_clk_init; } void __init am35xx_init_early(void) { omap3_init_early(); - if (of_have_populated_dt()) - omap_clk_soc_init = am35xx_dt_clk_init; + omap_clk_soc_init = am35xx_dt_clk_init; } void __init omap3_init_late(void) @@ -628,8 +600,7 @@ void __init ti816x_init_early(void) ti816x_clockdomains_init(); dm816x_hwmod_init(); omap_hwmod_init_postsetup(); - if (of_have_populated_dt()) - omap_clk_soc_init = dm816x_dt_clk_init; + omap_clk_soc_init = dm816x_dt_clk_init; } #endif @@ -785,21 +756,19 @@ int __init omap_clk_init(void) omap2_clk_setup_ll_ops(); - if (of_have_populated_dt()) { - ret = omap_control_init(); - if (ret) - return ret; + ret = omap_control_init(); + if (ret) + return ret; - ret = omap_prcm_init(); - if (ret) - return ret; + ret = omap_prcm_init(); + if (ret) + return ret; - of_clk_init(NULL); + of_clk_init(NULL); - ti_dt_clk_init_retry_clks(); + ti_dt_clk_init_retry_clks(); - ti_dt_clockdomains_setup(); - } + ti_dt_clockdomains_setup(); ret = omap_clk_soc_init(); diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index fc04be74e064..4acc0dae27e0 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -53,73 +53,3 @@ void __init omap3_mcbsp_init_pdata_callback( pdata->force_ick_on = omap3_mcbsp_force_ick_on; } - -static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused) -{ - int id, count = 1; - char *name = "omap-mcbsp"; - struct omap_hwmod *oh_device[2]; - struct omap_mcbsp_platform_data *pdata = NULL; - struct platform_device *pdev; - - sscanf(oh->name, "mcbsp%d", &id); - - pdata = kzalloc(sizeof(struct omap_mcbsp_platform_data), GFP_KERNEL); - if (!pdata) { - pr_err("%s: No memory for mcbsp\n", __func__); - return -ENOMEM; - } - - pdata->reg_step = 4; - if (oh->class->rev < MCBSP_CONFIG_TYPE2) { - pdata->reg_size = 2; - } else { - pdata->reg_size = 4; - pdata->has_ccr = true; - } - - if (oh->class->rev == MCBSP_CONFIG_TYPE2) { - /* The FIFO has 128 locations */ - pdata->buffer_size = 0x80; - } else if (oh->class->rev == MCBSP_CONFIG_TYPE3) { - if (id == 2) - /* The FIFO has 1024 + 256 locations */ - pdata->buffer_size = 0x500; - else - /* The FIFO has 128 locations */ - pdata->buffer_size = 0x80; - } else if (oh->class->rev == MCBSP_CONFIG_TYPE4) { - /* The FIFO has 128 locations for all instances */ - pdata->buffer_size = 0x80; - } - - if (oh->class->rev >= MCBSP_CONFIG_TYPE3) - pdata->has_wakeup = true; - - oh_device[0] = oh; - - if (oh->dev_attr) { - oh_device[1] = omap_hwmod_lookup(( - (struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone); - pdata->force_ick_on = omap3_mcbsp_force_ick_on; - count++; - } - pdev = omap_device_build_ss(name, id, oh_device, count, pdata, - sizeof(*pdata)); - kfree(pdata); - if (IS_ERR(pdev)) { - pr_err("%s: Can't build omap_device for %s:%s.\n", __func__, - name, oh->name); - return PTR_ERR(pdev); - } - return 0; -} - -static int __init omap2_mcbsp_init(void) -{ - if (!of_have_populated_dt()) - omap_hwmod_for_each_by_class("mcbsp", omap_init_mcbsp, NULL); - - return 0; -} -omap_arch_initcall(omap2_mcbsp_init); diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 369f95a703ac..33ed5d53fa45 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -58,6 +58,17 @@ static unsigned int irq_banks = DEFAULT_NR_REG_BANKS; static unsigned int max_irqs = DEFAULT_IRQS; static unsigned int omap_secure_apis; +#ifdef CONFIG_CPU_PM +static unsigned int wakeupgen_context[MAX_NR_REG_BANKS]; +#endif + +struct omap_wakeupgen_ops { + void (*save_context)(void); + void (*restore_context)(void); +}; + +static struct omap_wakeupgen_ops *wakeupgen_ops; + /* * Static helper functions. */ @@ -264,6 +275,16 @@ static inline void omap5_irq_save_context(void) } +static inline void am43xx_irq_save_context(void) +{ + u32 i; + + for (i = 0; i < irq_banks; i++) { + wakeupgen_context[i] = wakeupgen_readl(i, 0); + wakeupgen_writel(0, i, CPU0_ID); + } +} + /* * Save WakeupGen interrupt context in SAR BANK3. Restore is done by * ROM code. WakeupGen IP is integrated along with GIC to manage the @@ -280,11 +301,8 @@ static void irq_save_context(void) if (!sar_base) sar_base = omap4_get_sar_ram_base(); - - if (soc_is_omap54xx()) - omap5_irq_save_context(); - else - omap4_irq_save_context(); + if (wakeupgen_ops && wakeupgen_ops->save_context) + wakeupgen_ops->save_context(); } /* @@ -306,6 +324,20 @@ static void irq_sar_clear(void) writel_relaxed(val, sar_base + offset); } +static void am43xx_irq_restore_context(void) +{ + u32 i; + + for (i = 0; i < irq_banks; i++) + wakeupgen_writel(wakeupgen_context[i], i, CPU0_ID); +} + +static void irq_restore_context(void) +{ + if (wakeupgen_ops && wakeupgen_ops->restore_context) + wakeupgen_ops->restore_context(); +} + /* * Save GIC and Wakeupgen interrupt context using secure API * for HS/EMU devices. @@ -319,6 +351,26 @@ static void irq_save_secure_context(void) if (ret != API_HAL_RET_VALUE_OK) pr_err("GIC and Wakeupgen context save failed\n"); } + +/* Define ops for context save and restore for each SoC */ +static struct omap_wakeupgen_ops omap4_wakeupgen_ops = { + .save_context = omap4_irq_save_context, + .restore_context = irq_sar_clear, +}; + +static struct omap_wakeupgen_ops omap5_wakeupgen_ops = { + .save_context = omap5_irq_save_context, + .restore_context = irq_sar_clear, +}; + +static struct omap_wakeupgen_ops am43xx_wakeupgen_ops = { + .save_context = am43xx_irq_save_context, + .restore_context = am43xx_irq_restore_context, +}; +#else +static struct omap_wakeupgen_ops omap4_wakeupgen_ops = {}; +static struct omap_wakeupgen_ops omap5_wakeupgen_ops = {}; +static struct omap_wakeupgen_ops am43xx_wakeupgen_ops = {}; #endif #ifdef CONFIG_HOTPLUG_CPU @@ -359,7 +411,7 @@ static int irq_notifier(struct notifier_block *self, unsigned long cmd, void *v) break; case CPU_CLUSTER_PM_EXIT: if (omap_type() == OMAP2_DEVICE_TYPE_GP) - irq_sar_clear(); + irq_restore_context(); break; } return NOTIFY_OK; @@ -494,9 +546,13 @@ static int __init wakeupgen_init(struct device_node *node, irq_banks = OMAP4_NR_BANKS; max_irqs = OMAP4_NR_IRQS; omap_secure_apis = 1; + wakeupgen_ops = &omap4_wakeupgen_ops; + } else if (soc_is_omap54xx()) { + wakeupgen_ops = &omap5_wakeupgen_ops; } else if (soc_is_am43xx()) { irq_banks = AM43XX_NR_REG_BANKS; max_irqs = AM43XX_IRQS; + wakeupgen_ops = &am43xx_wakeupgen_ops; } domain = irq_domain_add_hierarchy(parent_domain, 0, max_irqs, diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index f989145480c8..ef9ffb8ac912 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -65,7 +65,7 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias, r = clk_get_sys(NULL, clk_name); - if (IS_ERR(r) && of_have_populated_dt()) { + if (IS_ERR(r)) { struct of_phandle_args clkspec; clkspec.np = of_find_node_by_name(NULL, clk_name); @@ -953,9 +953,6 @@ static int __init omap_device_late_init(void) { bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle); - WARN(!of_have_populated_dt(), - "legacy booting deprecated, please update to boot with .dts\n"); - return 0; } omap_late_initcall_sync(omap_device_late_init); diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 8bcea0d83fa0..3b47ded5fa0c 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -141,6 +141,7 @@ #include <linux/cpu.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/bootmem.h> #include <asm/system_misc.h> @@ -182,6 +183,24 @@ #define MOD_CLK_MAX_NAME_LEN 32 /** + * struct clkctrl_provider - clkctrl provider mapping data + * @addr: base address for the provider + * @offset: base offset for the provider + * @clkdm: base clockdomain for provider + * @node: device node associated with the provider + * @link: list link + */ +struct clkctrl_provider { + u32 addr; + u16 offset; + struct clockdomain *clkdm; + struct device_node *node; + struct list_head link; +}; + +static LIST_HEAD(clkctrl_providers); + +/** * struct omap_hwmod_soc_ops - fn ptrs for some SoC-specific operations * @enable_module: function to enable a module (via MODULEMODE) * @disable_module: function to disable a module (via MODULEMODE) @@ -204,6 +223,8 @@ struct omap_hwmod_soc_ops { void (*update_context_lost)(struct omap_hwmod *oh); int (*get_context_lost)(struct omap_hwmod *oh); int (*disable_direct_prcm)(struct omap_hwmod *oh); + u32 (*xlate_clkctrl)(struct omap_hwmod *oh, + struct clkctrl_provider *provider); }; /* soc_ops: adapts the omap_hwmod code to the currently-booted SoC */ @@ -690,6 +711,103 @@ static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh) return clkdm_del_sleepdep(clkdm, init_clkdm); } +static const struct of_device_id ti_clkctrl_match_table[] __initconst = { + { .compatible = "ti,clkctrl" }, + { } +}; + +static int _match_clkdm(struct clockdomain *clkdm, void *user) +{ + struct clkctrl_provider *provider = user; + + if (clkdm_xlate_address(clkdm) == provider->addr) { + pr_debug("%s: Matched clkdm %s for addr %x (%s)\n", __func__, + clkdm->name, provider->addr, + provider->node->parent->name); + provider->clkdm = clkdm; + + return -1; + } + + return 0; +} + +static int _setup_clkctrl_provider(struct device_node *np) +{ + const __be32 *addrp; + struct clkctrl_provider *provider; + + provider = memblock_virt_alloc(sizeof(*provider), 0); + if (!provider) + return -ENOMEM; + + addrp = of_get_address(np, 0, NULL, NULL); + provider->addr = (u32)of_translate_address(np, addrp); + provider->offset = provider->addr & 0xff; + provider->addr &= ~0xff; + provider->node = np; + + clkdm_for_each(_match_clkdm, provider); + + if (!provider->clkdm) { + pr_err("%s: nothing matched for node %s (%x)\n", + __func__, np->parent->name, provider->addr); + memblock_free_early(__pa(provider), sizeof(*provider)); + return -EINVAL; + } + + list_add(&provider->link, &clkctrl_providers); + + return 0; +} + +static int _init_clkctrl_providers(void) +{ + struct device_node *np; + int ret = 0; + + for_each_matching_node(np, ti_clkctrl_match_table) { + ret = _setup_clkctrl_provider(np); + if (ret) + break; + } + + return ret; +} + +static u32 _omap4_xlate_clkctrl(struct omap_hwmod *oh, + struct clkctrl_provider *provider) +{ + return oh->prcm.omap4.clkctrl_offs - + provider->offset - provider->clkdm->clkdm_offs; +} + +static struct clk *_lookup_clkctrl_clk(struct omap_hwmod *oh) +{ + struct clkctrl_provider *provider; + struct clk *clk; + + if (!soc_ops.xlate_clkctrl) + return NULL; + + list_for_each_entry(provider, &clkctrl_providers, link) { + if (provider->clkdm == oh->clkdm) { + struct of_phandle_args clkspec; + + clkspec.np = provider->node; + clkspec.args_count = 2; + clkspec.args[0] = soc_ops.xlate_clkctrl(oh, provider); + clkspec.args[1] = 0; + + clk = of_clk_get_from_provider(&clkspec); + + return clk; + } + } + + return NULL; +} + /** * _init_main_clk - get a struct clk * for the the hwmod's main functional clk * @oh: struct omap_hwmod * @@ -701,22 +819,16 @@ static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh) static int _init_main_clk(struct omap_hwmod *oh) { int ret = 0; - char name[MOD_CLK_MAX_NAME_LEN]; - struct clk *clk; - static const char modck[] = "_mod_ck"; + struct clk *clk = NULL; - if (strlen(oh->name) >= MOD_CLK_MAX_NAME_LEN - strlen(modck)) - pr_warn("%s: warning: cropping name for %s\n", __func__, - oh->name); - - strlcpy(name, oh->name, MOD_CLK_MAX_NAME_LEN - strlen(modck)); - strlcat(name, modck, MOD_CLK_MAX_NAME_LEN); + clk = _lookup_clkctrl_clk(oh); - clk = clk_get(NULL, name); - if (!IS_ERR(clk)) { + if (!IS_ERR_OR_NULL(clk)) { + pr_debug("%s: mapped main_clk %s for %s\n", __func__, + __clk_get_name(clk), oh->name); + oh->main_clk = __clk_get_name(clk); oh->_clk = clk; soc_ops.disable_direct_prcm(oh); - oh->main_clk = kstrdup(name, GFP_KERNEL); } else { if (!oh->main_clk) return 0; @@ -1482,13 +1594,13 @@ static int _init_clkdm(struct omap_hwmod *oh) * _init_clocks - clk_get() all clocks associated with this hwmod. Retrieve as * well the clockdomain. * @oh: struct omap_hwmod * - * @data: not used; pass NULL + * @np: device_node mapped to this hwmod * * Called by omap_hwmod_setup_*() (after omap2_clk_init()). * Resolves all clock names embedded in the hwmod. Returns 0 on * success, or a negative error code on failure. */ -static int _init_clocks(struct omap_hwmod *oh, void *data) +static int _init_clocks(struct omap_hwmod *oh, struct device_node *np) { int ret = 0; @@ -2334,24 +2446,21 @@ static int __init _init(struct omap_hwmod *oh, void *data) { int r, index; struct device_node *np = NULL; + struct device_node *bus; if (oh->_state != _HWMOD_STATE_REGISTERED) return 0; - if (of_have_populated_dt()) { - struct device_node *bus; + bus = of_find_node_by_name(NULL, "ocp"); + if (!bus) + return -ENODEV; - bus = of_find_node_by_name(NULL, "ocp"); - if (!bus) - return -ENODEV; - - r = of_dev_hwmod_lookup(bus, oh, &index, &np); - if (r) - pr_debug("omap_hwmod: %s missing dt data\n", oh->name); - else if (np && index) - pr_warn("omap_hwmod: %s using broken dt data from %s\n", - oh->name, np->name); - } + r = of_dev_hwmod_lookup(bus, oh, &index, &np); + if (r) + pr_debug("omap_hwmod: %s missing dt data\n", oh->name); + else if (np && index) + pr_warn("omap_hwmod: %s using broken dt data from %s\n", + oh->name, np->name); r = _init_mpu_rt_base(oh, NULL, index, np); if (r < 0) { @@ -2360,7 +2469,7 @@ static int __init _init(struct omap_hwmod *oh, void *data) return 0; } - r = _init_clocks(oh, NULL); + r = _init_clocks(oh, np); if (r < 0) { WARN(1, "omap_hwmod: %s: couldn't init clocks\n", oh->name); return -EINVAL; @@ -3722,6 +3831,7 @@ void __init omap_hwmod_init(void) soc_ops.update_context_lost = _omap4_update_context_lost; soc_ops.get_context_lost = _omap4_get_context_lost; soc_ops.disable_direct_prcm = _omap4_disable_direct_prcm; + soc_ops.xlate_clkctrl = _omap4_xlate_clkctrl; } else if (cpu_is_ti814x() || cpu_is_ti816x() || soc_is_am33xx() || soc_is_am43xx()) { soc_ops.enable_module = _omap4_enable_module; @@ -3736,6 +3846,8 @@ void __init omap_hwmod_init(void) WARN(1, "omap_hwmod: unknown SoC type\n"); } + _init_clkctrl_providers(); + inited = true; } diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 1c6ca4d5fa2d..c3276436b0ae 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -3204,8 +3204,7 @@ int __init omap3xxx_hwmod_init(void) * If DT information is missing, enable them only for GP devices. */ - if (of_have_populated_dt()) - bus = of_find_node_by_name(NULL, "ocp"); + bus = of_find_node_by_name(NULL, "ocp"); if (h_sham && omap3xxx_hwmod_is_hs_ip_block_usable(bus, "sham")) { r = omap_hwmod_register_links(h_sham); diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 94f09c720f29..3e2d792fd9df 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -775,6 +775,7 @@ static struct omap_hwmod_dma_info omap44xx_dss_hdmi_sdma_reqs[] = { static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = { { .role = "sys_clk", .clk = "dss_sys_clk" }, + { .role = "hdmi_clk", .clk = "dss_48mhz_clk" }, }; static struct omap_hwmod omap44xx_dss_hdmi_hwmod = { @@ -785,7 +786,7 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = { * HDMI audio requires to use no-idle mode. Hence, * set idle mode by software. */ - .flags = HWMOD_SWSUP_SIDLE, + .flags = HWMOD_SWSUP_SIDLE | HWMOD_OPT_CLKS_NEEDED, .mpu_irqs = omap44xx_dss_hdmi_irqs, .xlate_irq = omap4_xlate_irq, .sdma_reqs = omap44xx_dss_hdmi_sdma_reqs, @@ -858,11 +859,16 @@ static struct omap_hwmod_class omap44xx_venc_hwmod_class = { }; /* dss_venc */ +static struct omap_hwmod_opt_clk dss_venc_opt_clks[] = { + { .role = "tv_clk", .clk = "dss_tv_clk" }, +}; + static struct omap_hwmod omap44xx_dss_venc_hwmod = { .name = "dss_venc", .class = &omap44xx_venc_hwmod_class, .clkdm_name = "l3_dss_clkdm", .main_clk = "dss_tv_clk", + .flags = HWMOD_OPT_CLKS_NEEDED, .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, @@ -870,6 +876,35 @@ static struct omap_hwmod omap44xx_dss_venc_hwmod = { }, }, .parent_hwmod = &omap44xx_dss_hwmod, + .opt_clks = dss_venc_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_venc_opt_clks), +}; + +/* sha0 HIB2 (the 'P' (public) device) */ +static struct omap_hwmod_class_sysconfig omap44xx_sha0_sysc = { + .rev_offs = 0x100, + .sysc_offs = 0x110, + .syss_offs = 0x114, + .sysc_flags = SYSS_HAS_RESET_STATUS, +}; + +static struct omap_hwmod_class omap44xx_sha0_hwmod_class = { + .name = "sham", + .sysc = &omap44xx_sha0_sysc, +}; + +struct omap_hwmod omap44xx_sha0_hwmod = { + .name = "sham", + .class = &omap44xx_sha0_hwmod_class, + .clkdm_name = "l4_secure_clkdm", + .main_clk = "l3_div_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP4_CM_L4SEC_SHA2MD51_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4SEC_SHA2MD51_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, }; /* @@ -953,6 +988,103 @@ static struct omap_hwmod omap44xx_emif2_hwmod = { }; /* + Crypto modules AES0/1 belong to: + PD_L4_PER power domain + CD_L4_SEC clock domain + On the L3, the AES modules are mapped to + L3_CLK2: Peripherals and multimedia sub clock domain +*/ +static struct omap_hwmod_class_sysconfig omap44xx_aes_sysc = { + .rev_offs = 0x80, + .sysc_offs = 0x84, + .syss_offs = 0x88, + .sysc_flags = SYSS_HAS_RESET_STATUS, +}; + +static struct omap_hwmod_class omap44xx_aes_hwmod_class = { + .name = "aes", + .sysc = &omap44xx_aes_sysc, +}; + +static struct omap_hwmod omap44xx_aes1_hwmod = { + .name = "aes1", + .class = &omap44xx_aes_hwmod_class, + .clkdm_name = "l4_secure_clkdm", + .main_clk = "l3_div_ck", + .prcm = { + .omap4 = { + .context_offs = OMAP4_RM_L4SEC_AES1_CONTEXT_OFFSET, + .clkctrl_offs = OMAP4_CM_L4SEC_AES1_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__aes1 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_aes1_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod omap44xx_aes2_hwmod = { + .name = "aes2", + .class = &omap44xx_aes_hwmod_class, + .clkdm_name = "l4_secure_clkdm", + .main_clk = "l3_div_ck", + .prcm = { + .omap4 = { + .context_offs = OMAP4_RM_L4SEC_AES2_CONTEXT_OFFSET, + .clkctrl_offs = OMAP4_CM_L4SEC_AES2_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__aes2 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_aes2_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* + * 'des' class for DES3DES module + */ +static struct omap_hwmod_class_sysconfig omap44xx_des_sysc = { + .rev_offs = 0x30, + .sysc_offs = 0x34, + .syss_offs = 0x38, + .sysc_flags = SYSS_HAS_RESET_STATUS, +}; + +static struct omap_hwmod_class omap44xx_des_hwmod_class = { + .name = "des", + .sysc = &omap44xx_des_sysc, +}; + +static struct omap_hwmod omap44xx_des_hwmod = { + .name = "des", + .class = &omap44xx_des_hwmod_class, + .clkdm_name = "l4_secure_clkdm", + .main_clk = "l3_div_ck", + .prcm = { + .omap4 = { + .context_offs = OMAP4_RM_L4SEC_DES3DES_CONTEXT_OFFSET, + .clkctrl_offs = OMAP4_CM_L4SEC_DES3DES_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +struct omap_hwmod_ocp_if omap44xx_l3_main_2__des = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_des_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* * 'fdif' class * face detection hw accelerator module */ @@ -3882,6 +4014,14 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_venc = { .user = OCP_USER_MPU, }; +/* l3_main_2 -> sham */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__sha0 = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_sha0_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* l4_per -> elm */ static struct omap_hwmod_ocp_if omap44xx_l4_per__elm = { .master = &omap44xx_l4_per_hwmod, @@ -4793,6 +4933,10 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_abe__wd_timer3_dma, &omap44xx_mpu__emif1, &omap44xx_mpu__emif2, + &omap44xx_l3_main_2__aes1, + &omap44xx_l3_main_2__aes2, + &omap44xx_l3_main_2__des, + &omap44xx_l3_main_2__sha0, NULL, }; diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c deleted file mode 100644 index a358a07e18f2..000000000000 --- a/arch/arm/mach-omap2/opp.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - * OMAP SoC specific OPP wrapper function - * - * Copyright (C) 2009-2010 Texas Instruments Incorporated - http://www.ti.com/ - * Nishanth Menon - * Kevin Hilman - * Copyright (C) 2010 Nokia Corporation. - * Eduardo Valentin - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <linux/module.h> -#include <linux/of.h> -#include <linux/pm_opp.h> -#include <linux/cpu.h> - -#include "omap_device.h" - -#include "omap_opp_data.h" - -/* Temp variable to allow multiple calls */ -static u8 __initdata omap_table_init; - -/** - * omap_init_opp_table() - Initialize opp table as per the CPU type - * @opp_def: opp default list for this silicon - * @opp_def_size: number of opp entries for this silicon - * - * Register the initial OPP table with the OPP library based on the CPU - * type. This is meant to be used only by SoC specific registration. - */ -int __init omap_init_opp_table(struct omap_opp_def *opp_def, - u32 opp_def_size) -{ - int i, r; - - if (of_have_populated_dt()) - return -EINVAL; - - if (!opp_def || !opp_def_size) { - pr_err("%s: invalid params!\n", __func__); - return -EINVAL; - } - - /* - * Initialize only if not already initialized even if the previous - * call failed, because, no reason we'd succeed again. - */ - if (omap_table_init) - return -EEXIST; - omap_table_init = 1; - - /* Lets now register with OPP library */ - for (i = 0; i < opp_def_size; i++, opp_def++) { - struct omap_hwmod *oh; - struct device *dev; - - if (!opp_def->hwmod_name) { - pr_err("%s: NULL name of omap_hwmod, failing [%d].\n", - __func__, i); - return -EINVAL; - } - - if (!strncmp(opp_def->hwmod_name, "mpu", 3)) { - /* - * All current OMAPs share voltage rail and - * clock source, so CPU0 is used to represent - * the MPU-SS. - */ - dev = get_cpu_device(0); - } else { - oh = omap_hwmod_lookup(opp_def->hwmod_name); - if (!oh || !oh->od) { - pr_debug("%s: no hwmod or odev for %s, [%d] cannot add OPPs.\n", - __func__, opp_def->hwmod_name, i); - continue; - } - dev = &oh->od->pdev->dev; - } - - r = dev_pm_opp_add(dev, opp_def->freq, opp_def->u_volt); - if (r) { - dev_err(dev, "%s: add OPP %ld failed for %s [%d] result=%d\n", - __func__, opp_def->freq, - opp_def->hwmod_name, i, r); - } else { - if (!opp_def->default_available) - r = dev_pm_opp_disable(dev, opp_def->freq); - if (r) - dev_err(dev, "%s: disable %ld failed for %s [%d] result=%d\n", - __func__, opp_def->freq, - opp_def->hwmod_name, i, r); - } - } - - return 0; -} diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c index fc67add76444..c2d459f5b0da 100644 --- a/arch/arm/mach-omap2/opp3xxx_data.c +++ b/arch/arm/mach-omap2/opp3xxx_data.c @@ -83,89 +83,3 @@ struct omap_volt_data omap36xx_vddcore_volt_data[] = { VOLT_DATA_DEFINE(OMAP3630_VDD_CORE_OPP100_UV, OMAP3630_CONTROL_FUSE_OPP100_VDD2, 0xf9, 0x16), VOLT_DATA_DEFINE(0, 0, 0, 0), }; - -/* OPP data */ - -static struct omap_opp_def __initdata omap34xx_opp_def_list[] = { - /* MPU OPP1 */ - OPP_INITIALIZER("mpu", true, 125000000, OMAP3430_VDD_MPU_OPP1_UV), - /* MPU OPP2 */ - OPP_INITIALIZER("mpu", true, 250000000, OMAP3430_VDD_MPU_OPP2_UV), - /* MPU OPP3 */ - OPP_INITIALIZER("mpu", true, 500000000, OMAP3430_VDD_MPU_OPP3_UV), - /* MPU OPP4 */ - OPP_INITIALIZER("mpu", true, 550000000, OMAP3430_VDD_MPU_OPP4_UV), - /* MPU OPP5 */ - OPP_INITIALIZER("mpu", true, 600000000, OMAP3430_VDD_MPU_OPP5_UV), - - /* - * L3 OPP1 - 41.5 MHz is disabled because: The voltage for that OPP is - * almost the same than the one at 83MHz thus providing very little - * gain for the power point of view. In term of energy it will even - * increase the consumption due to the very negative performance - * impact that frequency will do to the MPU and the whole system in - * general. - */ - OPP_INITIALIZER("l3_main", false, 41500000, OMAP3430_VDD_CORE_OPP1_UV), - /* L3 OPP2 */ - OPP_INITIALIZER("l3_main", true, 83000000, OMAP3430_VDD_CORE_OPP2_UV), - /* L3 OPP3 */ - OPP_INITIALIZER("l3_main", true, 166000000, OMAP3430_VDD_CORE_OPP3_UV), - - /* DSP OPP1 */ - OPP_INITIALIZER("iva", true, 90000000, OMAP3430_VDD_MPU_OPP1_UV), - /* DSP OPP2 */ - OPP_INITIALIZER("iva", true, 180000000, OMAP3430_VDD_MPU_OPP2_UV), - /* DSP OPP3 */ - OPP_INITIALIZER("iva", true, 360000000, OMAP3430_VDD_MPU_OPP3_UV), - /* DSP OPP4 */ - OPP_INITIALIZER("iva", true, 400000000, OMAP3430_VDD_MPU_OPP4_UV), - /* DSP OPP5 */ - OPP_INITIALIZER("iva", true, 430000000, OMAP3430_VDD_MPU_OPP5_UV), -}; - -static struct omap_opp_def __initdata omap36xx_opp_def_list[] = { - /* MPU OPP1 - OPP50 */ - OPP_INITIALIZER("mpu", true, 300000000, OMAP3630_VDD_MPU_OPP50_UV), - /* MPU OPP2 - OPP100 */ - OPP_INITIALIZER("mpu", true, 600000000, OMAP3630_VDD_MPU_OPP100_UV), - /* MPU OPP3 - OPP-Turbo */ - OPP_INITIALIZER("mpu", false, 800000000, OMAP3630_VDD_MPU_OPP120_UV), - /* MPU OPP4 - OPP-SB */ - OPP_INITIALIZER("mpu", false, 1000000000, OMAP3630_VDD_MPU_OPP1G_UV), - - /* L3 OPP1 - OPP50 */ - OPP_INITIALIZER("l3_main", true, 100000000, OMAP3630_VDD_CORE_OPP50_UV), - /* L3 OPP2 - OPP100, OPP-Turbo, OPP-SB */ - OPP_INITIALIZER("l3_main", true, 200000000, OMAP3630_VDD_CORE_OPP100_UV), - - /* DSP OPP1 - OPP50 */ - OPP_INITIALIZER("iva", true, 260000000, OMAP3630_VDD_MPU_OPP50_UV), - /* DSP OPP2 - OPP100 */ - OPP_INITIALIZER("iva", true, 520000000, OMAP3630_VDD_MPU_OPP100_UV), - /* DSP OPP3 - OPP-Turbo */ - OPP_INITIALIZER("iva", false, 660000000, OMAP3630_VDD_MPU_OPP120_UV), - /* DSP OPP4 - OPP-SB */ - OPP_INITIALIZER("iva", false, 800000000, OMAP3630_VDD_MPU_OPP1G_UV), -}; - -/** - * omap3_opp_init() - initialize omap3 opp table - */ -int __init omap3_opp_init(void) -{ - int r = -ENODEV; - - if (!cpu_is_omap34xx()) - return r; - - if (cpu_is_omap3630()) - r = omap_init_opp_table(omap36xx_opp_def_list, - ARRAY_SIZE(omap36xx_opp_def_list)); - else - r = omap_init_opp_table(omap34xx_opp_def_list, - ARRAY_SIZE(omap34xx_opp_def_list)); - - return r; -} -omap_device_initcall(omap3_opp_init); diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c index 1ef7a3e5ce4a..adea43ea1c60 100644 --- a/arch/arm/mach-omap2/opp4xxx_data.c +++ b/arch/arm/mach-omap2/opp4xxx_data.c @@ -63,29 +63,6 @@ struct omap_volt_data omap443x_vdd_core_volt_data[] = { VOLT_DATA_DEFINE(0, 0, 0, 0), }; - -static struct omap_opp_def __initdata omap443x_opp_def_list[] = { - /* MPU OPP1 - OPP50 */ - OPP_INITIALIZER("mpu", true, 300000000, OMAP4430_VDD_MPU_OPP50_UV), - /* MPU OPP2 - OPP100 */ - OPP_INITIALIZER("mpu", true, 600000000, OMAP4430_VDD_MPU_OPP100_UV), - /* MPU OPP3 - OPP-Turbo */ - OPP_INITIALIZER("mpu", true, 800000000, OMAP4430_VDD_MPU_OPPTURBO_UV), - /* MPU OPP4 - OPP-SB */ - OPP_INITIALIZER("mpu", true, 1008000000, OMAP4430_VDD_MPU_OPPNITRO_UV), - /* L3 OPP1 - OPP50 */ - OPP_INITIALIZER("l3_main_1", true, 100000000, OMAP4430_VDD_CORE_OPP50_UV), - /* L3 OPP2 - OPP100, OPP-Turbo, OPP-SB */ - OPP_INITIALIZER("l3_main_1", true, 200000000, OMAP4430_VDD_CORE_OPP100_UV), - /* IVA OPP1 - OPP50 */ - OPP_INITIALIZER("iva", true, 133000000, OMAP4430_VDD_IVA_OPP50_UV), - /* IVA OPP2 - OPP100 */ - OPP_INITIALIZER("iva", true, 266100000, OMAP4430_VDD_IVA_OPP100_UV), - /* IVA OPP3 - OPP-Turbo */ - OPP_INITIALIZER("iva", false, 332000000, OMAP4430_VDD_IVA_OPPTURBO_UV), - /* TODO: add DSP, aess, fdif, gpu */ -}; - #define OMAP4460_VDD_MPU_OPP50_UV 1025000 #define OMAP4460_VDD_MPU_OPP100_UV 1200000 #define OMAP4460_VDD_MPU_OPPTURBO_UV 1313000 @@ -122,59 +99,3 @@ struct omap_volt_data omap446x_vdd_core_volt_data[] = { VOLT_DATA_DEFINE(OMAP4460_VDD_CORE_OPP100_OV_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP100OV, 0xf9, 0x16), VOLT_DATA_DEFINE(0, 0, 0, 0), }; - -static struct omap_opp_def __initdata omap446x_opp_def_list[] = { - /* MPU OPP1 - OPP50 */ - OPP_INITIALIZER("mpu", true, 350000000, OMAP4460_VDD_MPU_OPP50_UV), - /* MPU OPP2 - OPP100 */ - OPP_INITIALIZER("mpu", true, 700000000, OMAP4460_VDD_MPU_OPP100_UV), - /* MPU OPP3 - OPP-Turbo */ - OPP_INITIALIZER("mpu", true, 920000000, OMAP4460_VDD_MPU_OPPTURBO_UV), - /* - * MPU OPP4 - OPP-Nitro + Disabled as the reference schematics - * recommends TPS623631 - confirm and enable the opp in board file - * XXX: May be we should enable these based on mpu capability and - * Exception board files disable it... - */ - OPP_INITIALIZER("mpu", false, 1200000000, OMAP4460_VDD_MPU_OPPNITRO_UV), - /* MPU OPP4 - OPP-Nitro SpeedBin */ - OPP_INITIALIZER("mpu", false, 1500000000, OMAP4460_VDD_MPU_OPPNITRO_UV), - /* L3 OPP1 - OPP50 */ - OPP_INITIALIZER("l3_main_1", true, 100000000, OMAP4460_VDD_CORE_OPP50_UV), - /* L3 OPP2 - OPP100 */ - OPP_INITIALIZER("l3_main_1", true, 200000000, OMAP4460_VDD_CORE_OPP100_UV), - /* IVA OPP1 - OPP50 */ - OPP_INITIALIZER("iva", true, 133000000, OMAP4460_VDD_IVA_OPP50_UV), - /* IVA OPP2 - OPP100 */ - OPP_INITIALIZER("iva", true, 266100000, OMAP4460_VDD_IVA_OPP100_UV), - /* - * IVA OPP3 - OPP-Turbo + Disabled as the reference schematics - * recommends Phoenix VCORE2 which can supply only 600mA - so the ones - * above this OPP frequency, even though OMAP is capable, should be - * enabled by board file which is sure of the chip power capability - */ - OPP_INITIALIZER("iva", false, 332000000, OMAP4460_VDD_IVA_OPPTURBO_UV), - /* IVA OPP4 - OPP-Nitro */ - OPP_INITIALIZER("iva", false, 430000000, OMAP4460_VDD_IVA_OPPNITRO_UV), - /* IVA OPP5 - OPP-Nitro SpeedBin*/ - OPP_INITIALIZER("iva", false, 500000000, OMAP4460_VDD_IVA_OPPNITRO_UV), - - /* TODO: add DSP, aess, fdif, gpu */ -}; - -/** - * omap4_opp_init() - initialize omap4 opp table - */ -int __init omap4_opp_init(void) -{ - int r = -ENODEV; - - if (cpu_is_omap443x()) - r = omap_init_opp_table(omap443x_opp_def_list, - ARRAY_SIZE(omap443x_opp_def_list)); - else if (cpu_is_omap446x()) - r = omap_init_opp_table(omap446x_opp_def_list, - ARRAY_SIZE(omap446x_opp_def_list)); - return r; -} -omap_device_initcall(omap4_opp_init); diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 63027e60cc20..366158a54fcd 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -71,7 +71,7 @@ void omap_pm_get_oscillator(u32 *tstart, u32 *tshut) } #endif -int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused) +int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused) { clkdm_allow_idle(clkdm); return 0; diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c deleted file mode 100644 index d2adfebd3b3f..000000000000 --- a/arch/arm/mach-omap2/pmu.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * OMAP2 ARM Performance Monitoring Unit (PMU) Support - * - * Copyright (C) 2012 Texas Instruments, Inc. - * - * Contacts: - * Jon Hunter <jon-hunter@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#include <linux/of.h> - -#include <asm/system_info.h> - -#include "soc.h" -#include "omap_hwmod.h" -#include "omap_device.h" - -static char *omap2_pmu_oh_names[] = {"mpu"}; -static char *omap3_pmu_oh_names[] = {"mpu", "debugss"}; -static char *omap4430_pmu_oh_names[] = {"l3_main_3", "l3_instr", "debugss"}; -static struct platform_device *omap_pmu_dev; - -/** - * omap2_init_pmu - creates and registers PMU platform device - * @oh_num: Number of OMAP HWMODs required to create PMU device - * @oh_names: Array of OMAP HWMODS names required to create PMU device - * - * Uses OMAP HWMOD framework to create and register an ARM PMU device - * from a list of HWMOD names passed. Currently supports OMAP2, OMAP3 - * and OMAP4 devices. - */ -static int __init omap2_init_pmu(unsigned oh_num, char *oh_names[]) -{ - int i; - struct omap_hwmod *oh[3]; - char *dev_name = cpu_architecture() == CPU_ARCH_ARMv6 ? - "armv6-pmu" : "armv7-pmu"; - - if ((!oh_num) || (oh_num > 3)) - return -EINVAL; - - for (i = 0; i < oh_num; i++) { - oh[i] = omap_hwmod_lookup(oh_names[i]); - if (!oh[i]) { - pr_err("Could not look up %s hwmod\n", oh_names[i]); - return -ENODEV; - } - } - - omap_pmu_dev = omap_device_build_ss(dev_name, -1, oh, oh_num, NULL, 0); - WARN(IS_ERR(omap_pmu_dev), "Can't build omap_device for %s.\n", - dev_name); - - return PTR_ERR_OR_ZERO(omap_pmu_dev); -} - -static int __init omap_init_pmu(void) -{ - unsigned oh_num; - char **oh_names; - - /* XXX Remove this check when the CTI driver is available */ - if (cpu_is_omap443x()) { - pr_info("ARM PMU: not yet supported on OMAP4430 due to missing CTI driver\n"); - return 0; - } - - if (of_have_populated_dt()) - return 0; - - /* - * To create an ARM-PMU device the following HWMODs - * are required for the various OMAP2+ devices. - * - * OMAP24xx: mpu - * OMAP3xxx: mpu, debugss - * OMAP4430: l3_main_3, l3_instr, debugss - * OMAP4460/70: mpu, debugss - */ - if (cpu_is_omap443x()) { - oh_num = ARRAY_SIZE(omap4430_pmu_oh_names); - oh_names = omap4430_pmu_oh_names; - } else if (cpu_is_omap34xx() || cpu_is_omap44xx()) { - oh_num = ARRAY_SIZE(omap3_pmu_oh_names); - oh_names = omap3_pmu_oh_names; - } else { - oh_num = ARRAY_SIZE(omap2_pmu_oh_names); - oh_names = omap2_pmu_oh_names; - } - - return omap2_init_pmu(oh_num, oh_names); -} -omap_subsys_initcall(omap_init_pmu); diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index c8f590b7c32d..ee7041d523cf 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -526,10 +526,16 @@ struct omap_prcm_irq_setup { .priority = _priority \ } +struct omap_domain_base { + u32 pa; + void __iomem *va; +}; + /** * struct omap_prcm_init_data - PRCM driver init data * @index: clock memory mapping index to be used * @mem: IO mem pointer for this module + * @phys: IO mem physical base address for this module * @offset: module base address offset from the IO base * @flags: PRCM module init flags * @device_inst_offset: device instance offset within the module address space @@ -539,6 +545,7 @@ struct omap_prcm_irq_setup { struct omap_prcm_init_data { int index; void __iomem *mem; + u32 phys; s16 offset; u16 flags; s32 device_inst_offset; diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.c b/arch/arm/mach-omap2/prcm_mpu44xx.c index cdbee6326d29..9c782f5c3f94 100644 --- a/arch/arm/mach-omap2/prcm_mpu44xx.c +++ b/arch/arm/mach-omap2/prcm_mpu44xx.c @@ -24,7 +24,7 @@ * prcm_mpu_base: the virtual address of the start of the PRCM_MPU IP * block registers */ -void __iomem *prcm_mpu_base; +struct omap_domain_base prcm_mpu_base; /* PRCM_MPU low-level functions */ @@ -58,5 +58,5 @@ u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg) */ void __init omap2_set_globals_prcm_mpu(void __iomem *prcm_mpu) { - prcm_mpu_base = prcm_mpu; + prcm_mpu_base.va = prcm_mpu; } diff --git a/arch/arm/mach-omap2/prcm_mpu_44xx_54xx.h b/arch/arm/mach-omap2/prcm_mpu_44xx_54xx.h index ca149e70bed0..f565f7f73175 100644 --- a/arch/arm/mach-omap2/prcm_mpu_44xx_54xx.h +++ b/arch/arm/mach-omap2/prcm_mpu_44xx_54xx.h @@ -24,7 +24,9 @@ #define __ARCH_ARM_MACH_OMAP2_PRCM_MPU_44XX_54XX_H #ifndef __ASSEMBLER__ -extern void __iomem *prcm_mpu_base; +#include "prcm-common.h" + +extern struct omap_domain_base prcm_mpu_base; extern u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 idx); extern void omap4_prcm_mpu_write_inst_reg(u32 val, s16 inst, u16 idx); diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index 233bc84fbc0e..94dc3565add8 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -16,7 +16,7 @@ #include "prcm-common.h" # ifndef __ASSEMBLER__ -extern void __iomem *prm_base; +extern struct omap_domain_base prm_base; extern u16 prm_features; extern void omap2_set_globals_prm(void __iomem *prm); int omap_prcm_init(void); diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h index f57e29b0e041..6775e10883fb 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h @@ -55,12 +55,12 @@ /* Power/reset management domain register get/set */ static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx) { - return readl_relaxed(prm_base + module + idx); + return readl_relaxed(prm_base.va + module + idx); } static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx) { - writel_relaxed(val, prm_base + module + idx); + writel_relaxed(val, prm_base.va + module + idx); } /* Read-modify-write a register in a PRM module. Caller must lock */ diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c index dcb5001d77da..d2c5bcabdbeb 100644 --- a/arch/arm/mach-omap2/prm33xx.c +++ b/arch/arm/mach-omap2/prm33xx.c @@ -30,13 +30,13 @@ /* Read a register in a PRM instance */ static u32 am33xx_prm_read_reg(s16 inst, u16 idx) { - return readl_relaxed(prm_base + inst + idx); + return readl_relaxed(prm_base.va + inst + idx); } /* Write into a register in a PRM instance */ static void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx) { - writel_relaxed(val, prm_base + inst + idx); + writel_relaxed(val, prm_base.va + inst + idx); } /* Read-modify-write a register in PRM. Caller must lock */ diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c index 718981bb80cd..382e236fbfd9 100644 --- a/arch/arm/mach-omap2/prm3xxx.c +++ b/arch/arm/mach-omap2/prm3xxx.c @@ -676,7 +676,7 @@ static struct prm_ll_data omap3xxx_prm_ll_data = { int __init omap3xxx_prm_init(const struct omap_prcm_init_data *data) { omap2_clk_legacy_provider_init(TI_CLKM_PRM, - prm_base + OMAP3430_IVA2_MOD); + prm_base.va + OMAP3430_IVA2_MOD); if (omap3_has_io_wakeup()) prm_features |= PRM_HAS_IO_WAKEUP; @@ -690,6 +690,8 @@ static const struct of_device_id omap3_prm_dt_match_table[] = { static int omap3xxx_prm_late_init(void) { + struct device_node *np; + int irq_num; int ret; if (!(prm_features & PRM_HAS_IO_WAKEUP)) @@ -702,16 +704,11 @@ static int omap3xxx_prm_late_init(void) omap3_prcm_irq_setup.reconfigure_io_chain = omap3430_pre_es3_1_reconfigure_io_chain; - if (of_have_populated_dt()) { - struct device_node *np; - int irq_num; - - np = of_find_matching_node(NULL, omap3_prm_dt_match_table); - if (np) { - irq_num = of_irq_get(np, 0); - if (irq_num >= 0) - omap3_prcm_irq_setup.irq = irq_num; - } + np = of_find_matching_node(NULL, omap3_prm_dt_match_table); + if (np) { + irq_num = of_irq_get(np, 0); + if (irq_num >= 0) + omap3_prcm_irq_setup.irq = irq_num; } omap3xxx_prm_enable_io_wakeup(); diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 30768003f854..87e86a4a9ead 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -91,13 +91,13 @@ static struct prm_reset_src_map omap44xx_prm_reset_src_map[] = { /* Read a register in a CM/PRM instance in the PRM module */ static u32 omap4_prm_read_inst_reg(s16 inst, u16 reg) { - return readl_relaxed(prm_base + inst + reg); + return readl_relaxed(prm_base.va + inst + reg); } /* Write into a register in a CM/PRM instance in the PRM module */ static void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg) { - writel_relaxed(val, prm_base + inst + reg); + writel_relaxed(val, prm_base.va + inst + reg); } /* Read-modify-write a register in a PRM module. Caller must lock */ @@ -337,27 +337,6 @@ static void omap44xx_prm_reconfigure_io_chain(void) } /** - * omap44xx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches - * - * Activates the I/O wakeup event latches and allows events logged by - * those latches to signal a wakeup event to the PRCM. For I/O wakeups - * to occur, WAKEUPENABLE bits must be set in the pad mux registers, and - * omap44xx_prm_reconfigure_io_chain() must be called. No return value. - */ -static void __init omap44xx_prm_enable_io_wakeup(void) -{ - s32 inst = omap4_prmst_get_prm_dev_inst(); - - if (inst == PRM_INSTANCE_UNKNOWN) - return; - - omap4_prm_rmw_inst_reg_bits(OMAP4430_GLOBAL_WUEN_MASK, - OMAP4430_GLOBAL_WUEN_MASK, - inst, - omap4_prcm_irq_setup.pm_ctrl); -} - -/** * omap44xx_prm_read_reset_sources - return the last SoC reset source * * Return a u32 representing the last reset sources of the SoC. The @@ -689,8 +668,6 @@ struct pwrdm_ops omap4_pwrdm_operations = { .pwrdm_has_voltdm = omap4_check_vcvp, }; -static int omap44xx_prm_late_init(void); - /* * XXX document */ @@ -698,7 +675,6 @@ static struct prm_ll_data omap44xx_prm_ll_data = { .read_reset_sources = &omap44xx_prm_read_reset_sources, .was_any_context_lost_old = &omap44xx_prm_was_any_context_lost_old, .clear_context_loss_flags_old = &omap44xx_prm_clear_context_loss_flags_old, - .late_init = &omap44xx_prm_late_init, .assert_hardreset = omap4_prminst_assert_hardreset, .deassert_hardreset = omap4_prminst_deassert_hardreset, .is_hardreset_asserted = omap4_prminst_is_hardreset_asserted, @@ -735,41 +711,6 @@ int __init omap44xx_prm_init(const struct omap_prcm_init_data *data) return prm_register(&omap44xx_prm_ll_data); } -static int omap44xx_prm_late_init(void) -{ - int irq_num; - - if (!(prm_features & PRM_HAS_IO_WAKEUP)) - return 0; - - /* OMAP4+ is DT only now */ - if (!of_have_populated_dt()) - return 0; - - irq_num = of_irq_get(prm_init_data->np, 0); - /* - * Already have OMAP4 IRQ num. For all other platforms, we need - * IRQ numbers from DT - */ - if (irq_num < 0 && !(prm_init_data->flags & PRM_IRQ_DEFAULT)) { - if (irq_num == -EPROBE_DEFER) - return irq_num; - - /* Have nothing to do */ - return 0; - } - - /* Once OMAP4 DT is filled as well */ - if (irq_num >= 0) { - omap4_prcm_irq_setup.irq = irq_num; - omap4_prcm_irq_setup.xlate_irq = NULL; - } - - omap44xx_prm_enable_io_wakeup(); - - return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup); -} - static void __exit omap44xx_prm_exit(void) { prm_unregister(&omap44xx_prm_ll_data); diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index dc11841ca334..09180a59b1c9 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -66,7 +66,7 @@ static struct irq_chip_generic **prcm_irq_chips; static struct omap_prcm_irq_setup *prcm_irq_setup; /* prm_base: base virtual address of the PRM IP block */ -void __iomem *prm_base; +struct omap_domain_base prm_base; u16 prm_features; @@ -267,10 +267,9 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) { int nr_regs; u32 mask[OMAP_PRCM_MAX_NR_PENDING_REG]; - int offset, i; + int offset, i, irq; struct irq_chip_generic *gc; struct irq_chip_type *ct; - unsigned int irq; if (!irq_setup) return -EINVAL; @@ -325,7 +324,7 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) for (i = 0; i < irq_setup->nr_regs; i++) { gc = irq_alloc_generic_chip("PRCM", 1, - irq_setup->base_irq + i * 32, prm_base, + irq_setup->base_irq + i * 32, prm_base.va, handle_level_irq); if (!gc) { @@ -344,10 +343,8 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) prcm_irq_chips[i] = gc; } - if (of_have_populated_dt()) { - int irq = omap_prcm_event_to_irq("io"); - omap_pcs_legacy_init(irq, irq_setup->reconfigure_io_chain); - } + irq = omap_prcm_event_to_irq("io"); + omap_pcs_legacy_init(irq, irq_setup->reconfigure_io_chain); return 0; @@ -364,7 +361,7 @@ err: */ void __init omap2_set_globals_prm(void __iomem *prm) { - prm_base = prm; + prm_base.va = prm; } /** @@ -755,19 +752,22 @@ int __init omap2_prm_base_init(void) struct device_node *np; const struct of_device_id *match; struct omap_prcm_init_data *data; - void __iomem *mem; + struct resource res; + int ret; for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) { data = (struct omap_prcm_init_data *)match->data; - mem = of_iomap(np, 0); - if (!mem) - return -ENOMEM; + ret = of_address_to_resource(np, 0, &res); + if (ret) + return ret; - if (data->index == TI_CLKM_PRM) - prm_base = mem + data->offset; + data->mem = ioremap(res.start, resource_size(&res)); - data->mem = mem; + if (data->index == TI_CLKM_PRM) { + prm_base.va = data->mem + data->offset; + prm_base.pa = res.start + data->offset; + } data->np = np; diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c index d0b15dbafa2e..48b8127b4e99 100644 --- a/arch/arm/mach-omap2/prminst44xx.c +++ b/arch/arm/mach-omap2/prminst44xx.c @@ -29,7 +29,7 @@ #include "prcm_mpu44xx.h" #include "soc.h" -static void __iomem *_prm_bases[OMAP4_MAX_PRCM_PARTITIONS]; +static struct omap_domain_base _prm_bases[OMAP4_MAX_PRCM_PARTITIONS]; static s32 prm_dev_inst = PRM_INSTANCE_UNKNOWN; @@ -41,8 +41,10 @@ static s32 prm_dev_inst = PRM_INSTANCE_UNKNOWN; */ void omap_prm_base_init(void) { - _prm_bases[OMAP4430_PRM_PARTITION] = prm_base; - _prm_bases[OMAP4430_PRCM_MPU_PARTITION] = prcm_mpu_base; + memcpy(&_prm_bases[OMAP4430_PRM_PARTITION], &prm_base, + sizeof(prm_base)); + memcpy(&_prm_bases[OMAP4430_PRCM_MPU_PARTITION], &prcm_mpu_base, + sizeof(prcm_mpu_base)); } s32 omap4_prmst_get_prm_dev_inst(void) @@ -60,8 +62,8 @@ u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx) { BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || part == OMAP4430_INVALID_PRCM_PARTITION || - !_prm_bases[part]); - return readl_relaxed(_prm_bases[part] + inst + idx); + !_prm_bases[part].va); + return readl_relaxed(_prm_bases[part].va + inst + idx); } /* Write into a register in a PRM instance */ @@ -69,8 +71,8 @@ void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx) { BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || part == OMAP4430_INVALID_PRCM_PARTITION || - !_prm_bases[part]); - writel_relaxed(val, _prm_bases[part] + inst + idx); + !_prm_bases[part].va); + writel_relaxed(val, _prm_bases[part].va + inst + idx); } /* Read-modify-write a register in PRM. Caller must lock */ diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index d7cff2632d1e..eef6935e0403 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -44,13 +44,9 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data, while (volt_data[count].volt_nominal) count++; - nvalue_table = kzalloc(sizeof(struct omap_sr_nvalue_table)*count, - GFP_KERNEL); - - if (!nvalue_table) { - pr_err("OMAP: SmartReflex: cannot allocate memory for n-value table\n"); + nvalue_table = kcalloc(count, sizeof(*nvalue_table), GFP_KERNEL); + if (!nvalue_table) return; - } for (i = 0, j = 0; i < count; i++) { u32 v; @@ -102,12 +98,9 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user) char *name = "smartreflex"; static int i; - sr_data = kzalloc(sizeof(struct omap_sr_data), GFP_KERNEL); - if (!sr_data) { - pr_err("%s: Unable to allocate memory for %s sr_data\n", - __func__, oh->name); + sr_data = kzalloc(sizeof(*sr_data), GFP_KERNEL); + if (!sr_data) return -ENOMEM; - } sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr; if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) { diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 07dd692c4737..ece09c9461f7 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -68,6 +68,9 @@ static struct omap_dm_timer clkev; static struct clock_event_device clockevent_gpt; +/* Clockevent hwmod for am335x and am437x suspend */ +static struct omap_hwmod *clockevent_gpt_hwmod; + #ifdef CONFIG_SOC_HAS_REALTIME_COUNTER static unsigned long arch_timer_freq; @@ -125,6 +128,23 @@ static int omap2_gp_timer_set_periodic(struct clock_event_device *evt) return 0; } +static void omap_clkevt_idle(struct clock_event_device *unused) +{ + if (!clockevent_gpt_hwmod) + return; + + omap_hwmod_idle(clockevent_gpt_hwmod); +} + +static void omap_clkevt_unidle(struct clock_event_device *unused) +{ + if (!clockevent_gpt_hwmod) + return; + + omap_hwmod_enable(clockevent_gpt_hwmod); + __omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW); +} + static struct clock_event_device clockevent_gpt = { .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, @@ -232,37 +252,29 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, const char **timer_name, int posted) { - char name[10]; /* 10 = sizeof("gptXX_Xck0") */ const char *oh_name = NULL; struct device_node *np; struct omap_hwmod *oh; - struct resource irq, mem; struct clk *src; int r = 0; - if (of_have_populated_dt()) { - np = omap_get_timer_dt(omap_timer_match, property); - if (!np) - return -ENODEV; + np = omap_get_timer_dt(omap_timer_match, property); + if (!np) + return -ENODEV; - of_property_read_string_index(np, "ti,hwmods", 0, &oh_name); - if (!oh_name) - return -ENODEV; + of_property_read_string_index(np, "ti,hwmods", 0, &oh_name); + if (!oh_name) + return -ENODEV; - timer->irq = irq_of_parse_and_map(np, 0); - if (!timer->irq) - return -ENXIO; + timer->irq = irq_of_parse_and_map(np, 0); + if (!timer->irq) + return -ENXIO; - timer->io_base = of_iomap(np, 0); + timer->io_base = of_iomap(np, 0); - of_node_put(np); - } else { - if (omap_dm_timer_reserve_systimer(timer->id)) - return -ENODEV; + timer->fclk = of_clk_get_by_name(np, "fck"); - sprintf(name, "timer%d", timer->id); - oh_name = name; - } + of_node_put(np); oh = omap_hwmod_lookup(oh_name); if (!oh) @@ -270,29 +282,14 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, *timer_name = oh->name; - if (!of_have_populated_dt()) { - r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL, - &irq); - if (r) - return -ENXIO; - timer->irq = irq.start; - - r = omap_hwmod_get_resource_byname(oh, IORESOURCE_MEM, NULL, - &mem); - if (r) - return -ENXIO; - - /* Static mapping, never released */ - timer->io_base = ioremap(mem.start, mem.end - mem.start); - } - if (!timer->io_base) return -ENXIO; omap_hwmod_setup_one(oh_name); /* After the dmtimer is using hwmod these clocks won't be needed */ - timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh)); + if (IS_ERR_OR_NULL(timer->fclk)) + timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh)); if (IS_ERR(timer->fclk)) return PTR_ERR(timer->fclk); @@ -358,6 +355,14 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, 3, /* Timer internal resynch latency */ 0xffffffff); + if (soc_is_am33xx() || soc_is_am43xx()) { + clockevent_gpt.suspend = omap_clkevt_idle; + clockevent_gpt.resume = omap_clkevt_unidle; + + clockevent_gpt_hwmod = + omap_hwmod_lookup(clockevent_gpt.name); + } + pr_info("OMAP clockevent source: %s at %lu Hz\n", clockevent_gpt.name, clkev.rate); } @@ -405,18 +410,15 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void) const char *oh_name = "counter_32k"; /* - * If device-tree is present, then search the DT blob - * to see if the 32kHz counter is supported. + * See if the 32kHz counter is supported. */ - if (of_have_populated_dt()) { - np = omap_get_timer_dt(omap_counter_match, NULL); - if (!np) - return -ENODEV; - - of_property_read_string_index(np, "ti,hwmods", 0, &oh_name); - if (!oh_name) - return -ENODEV; - } + np = omap_get_timer_dt(omap_counter_match, NULL); + if (!np) + return -ENODEV; + + of_property_read_string_index(np, "ti,hwmods", 0, &oh_name); + if (!oh_name) + return -ENODEV; /* * First check hwmod data is available for sync32k counter @@ -434,18 +436,6 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void) return ret; } - if (!of_have_populated_dt()) { - void __iomem *vbase; - - vbase = omap_hwmod_get_mpu_rt_va(oh); - - ret = omap_init_clocksource_32k(vbase); - if (ret) { - pr_warn("%s: failed to initialize counter_32k as a clocksource (%d)\n", - __func__, ret); - omap_hwmod_idle(oh); - } - } return ret; } @@ -497,7 +487,7 @@ void __init omap_init_time(void) __omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon", 2, "timer_sys_ck", NULL, false); - clocksource_probe(); + timer_probe(); } #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX) @@ -506,7 +496,7 @@ void __init omap3_secure_sync32k_timer_init(void) __omap_sync32k_timer_init(12, "secure_32k_fck", "ti,timer-secure", 2, "timer_sys_ck", NULL, false); - clocksource_probe(); + timer_probe(); } #endif /* CONFIG_ARCH_OMAP3 */ @@ -517,7 +507,7 @@ void __init omap3_gptimer_timer_init(void) __omap_sync32k_timer_init(2, "timer_sys_ck", NULL, 1, "timer_sys_ck", "ti,timer-alwon", true); if (of_have_populated_dt()) - clocksource_probe(); + timer_probe(); } #endif @@ -532,7 +522,7 @@ static void __init omap4_sync32k_timer_init(void) void __init omap4_local_timer_init(void) { omap4_sync32k_timer_init(); - clocksource_probe(); + timer_probe(); } #endif @@ -656,101 +646,11 @@ void __init omap5_realtime_timer_init(void) omap4_sync32k_timer_init(); realtime_counter_init(); - clocksource_probe(); + timer_probe(); } #endif /* CONFIG_SOC_OMAP5 || CONFIG_SOC_DRA7XX */ /** - * omap_timer_init - build and register timer device with an - * associated timer hwmod - * @oh: timer hwmod pointer to be used to build timer device - * @user: parameter that can be passed from calling hwmod API - * - * Called by omap_hwmod_for_each_by_class to register each of the timer - * devices present in the system. The number of timer devices is known - * by parsing through the hwmod database for a given class name. At the - * end of function call memory is allocated for timer device and it is - * registered to the framework ready to be proved by the driver. - */ -static int __init omap_timer_init(struct omap_hwmod *oh, void *unused) -{ - int id; - int ret = 0; - char *name = "omap_timer"; - struct dmtimer_platform_data *pdata; - struct platform_device *pdev; - struct omap_timer_capability_dev_attr *timer_dev_attr; - - pr_debug("%s: %s\n", __func__, oh->name); - - /* on secure device, do not register secure timer */ - timer_dev_attr = oh->dev_attr; - if (omap_type() != OMAP2_DEVICE_TYPE_GP && timer_dev_attr) - if (timer_dev_attr->timer_capability == OMAP_TIMER_SECURE) - return ret; - - pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); - if (!pdata) { - pr_err("%s: No memory for [%s]\n", __func__, oh->name); - return -ENOMEM; - } - - /* - * Extract the IDs from name field in hwmod database - * and use the same for constructing ids' for the - * timer devices. In a way, we are avoiding usage of - * static variable witin the function to do the same. - * CAUTION: We have to be careful and make sure the - * name in hwmod database does not change in which case - * we might either make corresponding change here or - * switch back static variable mechanism. - */ - sscanf(oh->name, "timer%2d", &id); - - if (timer_dev_attr) - pdata->timer_capability = timer_dev_attr->timer_capability; - - pdata->timer_errata = omap_dm_timer_get_errata(); - pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count; - - pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata)); - - if (IS_ERR(pdev)) { - pr_err("%s: Can't build omap_device for %s: %s.\n", - __func__, name, oh->name); - ret = -EINVAL; - } - - kfree(pdata); - - return ret; -} - -/** - * omap2_dm_timer_init - top level regular device initialization - * - * Uses dedicated hwmod api to parse through hwmod database for - * given class name and then build and register the timer device. - */ -static int __init omap2_dm_timer_init(void) -{ - int ret; - - /* If dtb is there, the devices will be created dynamically */ - if (of_have_populated_dt()) - return -ENODEV; - - ret = omap_hwmod_for_each_by_class("timer", omap_timer_init, NULL); - if (unlikely(ret)) { - pr_err("%s: device registration failed.\n", __func__); - return -EINVAL; - } - - return 0; -} -omap_arch_initcall(omap2_dm_timer_init); - -/** * omap2_override_clocksource - clocksource override with user configuration * * Allows user to override default clocksource, using kernel parameter diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c index ff0a68cf7439..0084b6c77cf1 100644 --- a/arch/arm/mach-omap2/wd_timer.c +++ b/arch/arm/mach-omap2/wd_timer.c @@ -102,31 +102,3 @@ int omap2_wd_timer_reset(struct omap_hwmod *oh) return (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : omap2_wd_timer_disable(oh); } - -static int __init omap_init_wdt(void) -{ - int id = -1; - struct platform_device *pdev; - struct omap_hwmod *oh; - char *oh_name = "wd_timer2"; - char *dev_name = "omap_wdt"; - struct omap_wd_timer_platform_data pdata; - - if (!cpu_class_is_omap2() || of_have_populated_dt()) - return 0; - - oh = omap_hwmod_lookup(oh_name); - if (!oh) { - pr_err("Could not look up wd_timer%d hwmod\n", id); - return -EINVAL; - } - - pdata.read_reset_sources = prm_read_reset_sources; - - pdev = omap_device_build(dev_name, id, oh, &pdata, - sizeof(struct omap_wd_timer_platform_data)); - WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n", - dev_name, oh->name); - return 0; -} -omap_subsys_initcall(omap_init_wdt); diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig index 85e874a97337..7426211bddaf 100644 --- a/arch/arm/mach-prima2/Kconfig +++ b/arch/arm/mach-prima2/Kconfig @@ -27,7 +27,6 @@ config ARCH_ATLAS7 bool "CSR SiRFSoC ATLAS7 ARM Cortex A7 Platform" default y select ARM_GIC - select CPU_V7 select ATLAS7_TIMER select HAVE_ARM_SCU if SMP select HAVE_SMP diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index d452a49c0396..1467c1d1e541 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -27,7 +27,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/types.h> -#include <linux/i2c/pcf857x.h> +#include <linux/platform_data/pcf857x.h> #include <linux/i2c/pxa-i2c.h> #include <linux/mtd/nand.h> #include <linux/mtd/physmap.h> diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h index 5f6b850ebe33..c48b54d0f331 100644 --- a/arch/arm/mach-pxa/include/mach/magician.h +++ b/arch/arm/mach-pxa/include/mach/magician.h @@ -24,6 +24,7 @@ #define GPIO10_MAGICIAN_GSM_IRQ 10 #define GPIO11_MAGICIAN_GSM_OUT1 11 #define GPIO13_MAGICIAN_CPLD_IRQ 13 +#define GPIO14_MAGICIAN_TSC2046_CS 14 #define GPIO18_MAGICIAN_UNKNOWN 18 #define GPIO22_MAGICIAN_VIBRA_EN 22 #define GPIO26_MAGICIAN_GSM_POWER 26 diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index 051c554776a6..fae38fdc8d8e 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -27,7 +27,7 @@ #include <linux/i2c.h> #include <linux/leds.h> #include <linux/mfd/da903x.h> -#include <linux/i2c/max732x.h> +#include <linux/platform_data/max732x.h> #include <linux/i2c/pxa-i2c.h> #include <asm/types.h> diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index b413e36506af..7f3566c93733 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -54,6 +54,10 @@ #include "devices.h" #include "generic.h" +#include <linux/spi/spi.h> +#include <linux/spi/pxa2xx_spi.h> +#include <linux/spi/ads7846.h> + static unsigned long magician_pin_config[] __initdata = { /* SDRAM and Static Memory I/O Signals */ @@ -85,7 +89,7 @@ static unsigned long magician_pin_config[] __initdata = { /* SSP 2 TSC2046 touchscreen */ GPIO19_SSP2_SCLK, - GPIO14_SSP2_SFRM, + MFP_CFG_OUT(GPIO14, AF0, DRIVE_HIGH), /* frame as GPIO */ GPIO89_SSP2_TXD, GPIO88_SSP2_RXD, @@ -675,6 +679,37 @@ static struct platform_device bq24022 = { }; /* + * fixed regulator for ads7846 + */ + +static struct regulator_consumer_supply ads7846_supply = + REGULATOR_SUPPLY("vcc", "spi2.0"); + +static struct regulator_init_data vads7846_regulator = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &ads7846_supply, +}; + +static struct fixed_voltage_config vads7846 = { + .supply_name = "vads7846", + .microvolts = 3300000, /* probably */ + .gpio = -EINVAL, + .startup_delay = 0, + .init_data = &vads7846_regulator, +}; + +static struct platform_device vads7846_device = { + .name = "reg-fixed-voltage", + .id = -1, + .dev = { + .platform_data = &vads7846, + }, +}; + +/* * Vcore regulator MAX1587A */ @@ -852,6 +887,49 @@ static struct i2c_pxa_platform_data magician_i2c_power_info = { }; /* + * Touchscreen + */ + +static struct ads7846_platform_data ads7846_pdata = { + .model = 7846, + .x_plate_ohms = 317, + .y_plate_ohms = 500, + .pressure_max = 1023, /* with x plate ohms it will overflow 255 */ + .debounce_max = 3, /* first readout is always bad */ + .debounce_tol = 30, + .debounce_rep = 0, + .gpio_pendown = GPIO115_MAGICIAN_nPEN_IRQ, + .keep_vref_on = 1, + .wakeup = true, + .vref_delay_usecs = 100, + .penirq_recheck_delay_usecs = 100, +}; + +struct pxa2xx_spi_chip tsc2046_chip_info = { + .tx_threshold = 1, + .rx_threshold = 2, + .timeout = 64, + /* NOTICE must be GPIO, incompatibility with hw PXA SPI framing */ + .gpio_cs = GPIO14_MAGICIAN_TSC2046_CS, +}; + +static struct pxa2xx_spi_master magician_spi_info = { + .num_chipselect = 1, + .enable_dma = 1, +}; + +static struct spi_board_info ads7846_spi_board_info[] __initdata = { + { + .modalias = "ads7846", + .bus_num = 2, + .max_speed_hz = 2500000, + .platform_data = &ads7846_pdata, + .controller_data = &tsc2046_chip_info, + .irq = PXA_GPIO_TO_IRQ(GPIO115_MAGICIAN_nPEN_IRQ), + }, +}; + +/* * Platform devices */ @@ -865,6 +943,7 @@ static struct platform_device *devices[] __initdata = { &power_supply, &strataflash, &leds_gpio, + &vads7846_device, }; static struct gpio magician_global_gpios[] = { @@ -922,6 +1001,9 @@ static void __init magician_init(void) } else pr_err("LCD detection: CPLD mapping failed\n"); + pxa2xx_set_spi_info(2, &magician_spi_info); + spi_register_board_info(ARRAY_AND_SIZE(ads7846_spi_board_info)); + regulator_register_always_on(0, "power", pwm_backlight_supply, ARRAY_SIZE(pwm_backlight_supply), 5000000); diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index e7450fb49d24..f2237f471750 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -107,10 +107,8 @@ static int __init pxa_pm_init(void) sleep_save = kmalloc_array(pxa_cpu_pm_fns->save_count, sizeof(*sleep_save), GFP_KERNEL); - if (!sleep_save) { - printk(KERN_ERR "failed to alloc memory for pm save\n"); + if (!sleep_save) return -ENOMEM; - } suspend_set_ops(&pxa_pm_ops); return 0; diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c index eba595fac8ca..60cb59a7ebd1 100644 --- a/arch/arm/mach-pxa/pxa3xx-ulpi.c +++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c @@ -286,11 +286,9 @@ static int pxa3xx_u2d_probe(struct platform_device *pdev) struct resource *r; int err; - u2d = kzalloc(sizeof(struct pxa3xx_u2d_ulpi), GFP_KERNEL); - if (!u2d) { - dev_err(&pdev->dev, "failed to allocate memory\n"); + u2d = kzalloc(sizeof(*u2d), GFP_KERNEL); + if (!u2d) return -ENOMEM; - } u2d->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(u2d->clk)) { diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 7b6610e9dae4..2d45d18b1a5e 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -26,7 +26,7 @@ #include <linux/mtd/partitions.h> #include <linux/i2c/pxa-i2c.h> -#include <linux/i2c/pcf857x.h> +#include <linux/platform_data/pcf857x.h> #include <linux/platform_data/at24.h> #include <linux/smc91x.h> #include <linux/gpio.h> diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index ef0500a4c8ad..e41cabc4dc2b 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c @@ -55,7 +55,7 @@ static void __init rockchip_timer_init(void) } of_clk_init(NULL); - clocksource_probe(); + timer_probe(); } static void __init rockchip_dt_init(void) @@ -70,6 +70,7 @@ static const char * const rockchip_board_dt_compat[] = { "rockchip,rk3188", "rockchip,rk3228", "rockchip,rk3288", + "rockchip,rv1108", NULL, }; diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c index 6b279d037774..bdb5ec1cf560 100644 --- a/arch/arm/mach-rpc/ecard.c +++ b/arch/arm/mach-rpc/ecard.c @@ -761,19 +761,21 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot) return ec; } -static ssize_t ecard_show_irq(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t irq_show(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); return sprintf(buf, "%u\n", ec->irq); } +static DEVICE_ATTR_RO(irq); -static ssize_t ecard_show_dma(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t dma_show(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); return sprintf(buf, "%u\n", ec->dma); } +static DEVICE_ATTR_RO(dma); -static ssize_t ecard_show_resources(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t resource_show(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); char *str = buf; @@ -787,35 +789,39 @@ static ssize_t ecard_show_resources(struct device *dev, struct device_attribute return str - buf; } +static DEVICE_ATTR_RO(resource); -static ssize_t ecard_show_vendor(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t vendor_show(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); return sprintf(buf, "%u\n", ec->cid.manufacturer); } +static DEVICE_ATTR_RO(vendor); -static ssize_t ecard_show_device(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t device_show(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); return sprintf(buf, "%u\n", ec->cid.product); } +static DEVICE_ATTR_RO(device); -static ssize_t ecard_show_type(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t type_show(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); return sprintf(buf, "%s\n", ec->easi ? "EASI" : "IOC"); } - -static struct device_attribute ecard_dev_attrs[] = { - __ATTR(device, S_IRUGO, ecard_show_device, NULL), - __ATTR(dma, S_IRUGO, ecard_show_dma, NULL), - __ATTR(irq, S_IRUGO, ecard_show_irq, NULL), - __ATTR(resource, S_IRUGO, ecard_show_resources, NULL), - __ATTR(type, S_IRUGO, ecard_show_type, NULL), - __ATTR(vendor, S_IRUGO, ecard_show_vendor, NULL), - __ATTR_NULL, +static DEVICE_ATTR_RO(type); + +static struct attribute *ecard_dev_attrs[] = { + &dev_attr_device.attr, + &dev_attr_dma.attr, + &dev_attr_irq.attr, + &dev_attr_resource.attr, + &dev_attr_type.attr, + &dev_attr_vendor.attr, + NULL, }; - +ATTRIBUTE_GROUPS(ecard_dev); int ecard_request_resources(struct expansion_card *ec) { @@ -1120,7 +1126,7 @@ static int ecard_match(struct device *_dev, struct device_driver *_drv) struct bus_type ecard_bus_type = { .name = "ecard", - .dev_attrs = ecard_dev_attrs, + .dev_groups = ecard_dev_groups, .match = ecard_match, .probe = ecard_drv_probe, .remove = ecard_drv_remove, diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 4b1690acb6a5..f07da82ebfea 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -394,7 +394,7 @@ config MACH_SMDK2416 config MACH_S3C2416_DT bool "Samsung S3C2416 machine using devicetree" - select CLKSRC_OF + select TIMER_OF select USE_OF select PINCTRL select PINCTRL_S3C24XX diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 459214fa20b4..afd1f20be49e 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -40,7 +40,6 @@ config CPU_S3C6410 config S3C64XX_PL080 def_bool DMADEVICES - select ARM_AMBA select AMBA_PL08X config S3C64XX_SETUP_SDHCI @@ -336,7 +335,7 @@ config MACH_WLF_CRAGG_6410 config MACH_S3C64XX_DT bool "Samsung S3C6400/S3C6410 machine using Device Tree" - select CLKSRC_OF + select TIMER_OF select CPU_S3C6400 select CPU_S3C6410 select PINCTRL diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c index 45a195501b78..699429f28b73 100644 --- a/arch/arm/mach-shmobile/pm-rmobile.c +++ b/arch/arm/mach-shmobile/pm-rmobile.c @@ -130,7 +130,7 @@ static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd) struct generic_pm_domain *genpd = &rmobile_pd->genpd; struct dev_power_governor *gov = rmobile_pd->gov; - genpd->flags = GENPD_FLAG_PM_CLK; + genpd->flags |= GENPD_FLAG_PM_CLK; genpd->dev_ops.active_wakeup = rmobile_pd_active_wakeup; genpd->power_off = rmobile_pd_power_down; genpd->power_on = rmobile_pd_power_up; @@ -140,14 +140,6 @@ static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd) pm_genpd_init(genpd, gov ? : &simple_qos_governor, false); } -static int rmobile_pd_suspend_busy(void) -{ - /* - * This domain should not be turned off. - */ - return -EBUSY; -} - static int rmobile_pd_suspend_console(void) { /* @@ -260,8 +252,7 @@ static void __init rmobile_setup_pm_domain(struct device_node *np, * only be turned off if the CPU is not in use. */ pr_debug("PM domain %s contains CPU\n", name); - pd->gov = &pm_domain_always_on_gov; - pd->suspend = rmobile_pd_suspend_busy; + pd->genpd.flags |= GENPD_FLAG_ALWAYS_ON; break; case PD_CONSOLE: @@ -277,8 +268,7 @@ static void __init rmobile_setup_pm_domain(struct device_node *np, * is not in use. */ pr_debug("PM domain %s contains Coresight-ETM\n", name); - pd->gov = &pm_domain_always_on_gov; - pd->suspend = rmobile_pd_suspend_busy; + pd->genpd.flags |= GENPD_FLAG_ALWAYS_ON; break; case PD_MEMCTL: @@ -287,8 +277,7 @@ static void __init rmobile_setup_pm_domain(struct device_node *np, * should only be turned off if memory is not in use. */ pr_debug("PM domain %s contains MEMCTL\n", name); - pd->gov = &pm_domain_always_on_gov; - pd->suspend = rmobile_pd_suspend_busy; + pd->genpd.flags |= GENPD_FLAG_ALWAYS_ON; break; case PD_NORMAL: diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index 52d466b75973..a6e74f481dea 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -113,7 +113,7 @@ void __init rcar_gen2_timer_init(void) #endif /* CONFIG_ARM_ARCH_TIMER */ of_clk_init(NULL); - clocksource_probe(); + timer_probe(); } struct memory_reserve_config { diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c index ca2f6a82a414..31c43cabf362 100644 --- a/arch/arm/mach-spear/spear13xx.c +++ b/arch/arm/mach-spear/spear13xx.c @@ -124,5 +124,5 @@ void __init spear13xx_timer_init(void) clk_put(pclk); spear_setup_of_timer(); - clocksource_probe(); + timer_probe(); } diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig index 2d1419eb0896..0d1889bbde58 100644 --- a/arch/arm/mach-stm32/Kconfig +++ b/arch/arm/mach-stm32/Kconfig @@ -15,6 +15,11 @@ config MACH_STM32F429 depends on ARCH_STM32 default y +config MACH_STM32F469 + bool "STMicrolectronics STM32F469" + depends on ARCH_STM32 + default y + config MACH_STM32F746 bool "STMicrolectronics STM32F746" depends on ARCH_STM32 diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index f44e3acb5c90..7ab353fb25f2 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -42,7 +42,7 @@ static void __init sun6i_timer_init(void) of_clk_init(NULL); if (IS_ENABLED(CONFIG_RESET_CONTROLLER)) sun6i_reset_init(); - clocksource_probe(); + timer_probe(); } DT_MACHINE_START(SUN6I_DT, "Allwinner sun6i (A31) Family") diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index a4910ea6811a..048f15e8c669 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -407,7 +407,7 @@ static const char * u300_board_compat[] = { DT_MACHINE_START(U300_DT, "U300 S335/B335 (Device Tree)") .map_io = u300_map_io, .init_irq = u300_init_irq_dt, - .init_time = clocksource_probe, + .init_time = timer_probe, .init_machine = u300_init_machine_dt, .restart = u300_restart, .dt_compat = u300_board_compat, diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index ed118648313f..6aba9ebf8041 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -150,7 +150,7 @@ static void __init zynq_timer_init(void) { zynq_clock_init(); of_clk_init(NULL); - clocksource_probe(); + timer_probe(); } static struct map_desc zynq_cortex_a9_scu_map __initdata = { diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index c6c4c9c8824b..877a0e3fd17d 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -1045,8 +1045,8 @@ config ARM_L1_CACHE_SHIFT default 5 config ARM_DMA_MEM_BUFFERABLE - bool "Use non-cacheable memory for DMA" if (CPU_V6 || CPU_V6K) && !CPU_V7 - default y if CPU_V6 || CPU_V6K || CPU_V7 + bool "Use non-cacheable memory for DMA" if (CPU_V6 || CPU_V6K || CPU_V7M) && !CPU_V7 + default y if CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M help Historically, the kernel has used strongly ordered mappings to provide DMA coherent memory. With the advent of ARMv7, mapping @@ -1061,6 +1061,10 @@ config ARM_DMA_MEM_BUFFERABLE and therefore turning this on may result in unpredictable driver behaviour. Therefore, we offer this as an option. + On some of the beefier ARMv7-M machines (with DMA and write + buffers) you likely want this enabled, while those that + didn't need it until now also won't need it in the future. + You are recommended say 'Y' here and debug any affected drivers. config ARM_HEAVY_MB diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index b3dea80715b4..950d19babb5f 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -2,9 +2,8 @@ # Makefile for the linux arm-specific parts of the memory manager. # -obj-y := dma-mapping.o extable.o fault.o init.o \ - iomap.o - +obj-y := extable.o fault.o init.o iomap.o +obj-y += dma-mapping$(MMUEXT).o obj-$(CONFIG_MMU) += fault-armv.o flush.o idmap.o ioremap.o \ mmap.o pgd.o mmu.o pageattr.o diff --git a/arch/arm/mm/dma-mapping-nommu.c b/arch/arm/mm/dma-mapping-nommu.c new file mode 100644 index 000000000000..90ee354d803e --- /dev/null +++ b/arch/arm/mm/dma-mapping-nommu.c @@ -0,0 +1,228 @@ +/* + * Based on linux/arch/arm/mm/dma-mapping.c + * + * Copyright (C) 2000-2004 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/export.h> +#include <linux/mm.h> +#include <linux/dma-mapping.h> +#include <linux/scatterlist.h> + +#include <asm/cachetype.h> +#include <asm/cacheflush.h> +#include <asm/outercache.h> +#include <asm/cp15.h> + +#include "dma.h" + +/* + * dma_noop_ops is used if + * - MMU/MPU is off + * - cpu is v7m w/o cache support + * - device is coherent + * otherwise arm_nommu_dma_ops is used. + * + * arm_nommu_dma_ops rely on consistent DMA memory (please, refer to + * [1] on how to declare such memory). + * + * [1] Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt + */ + +static void *arm_nommu_dma_alloc(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp, + unsigned long attrs) + +{ + const struct dma_map_ops *ops = &dma_noop_ops; + + /* + * We are here because: + * - no consistent DMA region has been defined, so we can't + * continue. + * - there is no space left in consistent DMA region, so we + * only can fallback to generic allocator if we are + * advertised that consistency is not required. + */ + + if (attrs & DMA_ATTR_NON_CONSISTENT) + return ops->alloc(dev, size, dma_handle, gfp, attrs); + + WARN_ON_ONCE(1); + return NULL; +} + +static void arm_nommu_dma_free(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t dma_addr, + unsigned long attrs) +{ + const struct dma_map_ops *ops = &dma_noop_ops; + + if (attrs & DMA_ATTR_NON_CONSISTENT) + ops->free(dev, size, cpu_addr, dma_addr, attrs); + else + WARN_ON_ONCE(1); + + return; +} + +static void __dma_page_cpu_to_dev(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) +{ + dmac_map_area(__va(paddr), size, dir); + + if (dir == DMA_FROM_DEVICE) + outer_inv_range(paddr, paddr + size); + else + outer_clean_range(paddr, paddr + size); +} + +static void __dma_page_dev_to_cpu(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) +{ + if (dir != DMA_TO_DEVICE) { + outer_inv_range(paddr, paddr + size); + dmac_unmap_area(__va(paddr), size, dir); + } +} + +static dma_addr_t arm_nommu_dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction dir, + unsigned long attrs) +{ + dma_addr_t handle = page_to_phys(page) + offset; + + __dma_page_cpu_to_dev(handle, size, dir); + + return handle; +} + +static void arm_nommu_dma_unmap_page(struct device *dev, dma_addr_t handle, + size_t size, enum dma_data_direction dir, + unsigned long attrs) +{ + __dma_page_dev_to_cpu(handle, size, dir); +} + + +static int arm_nommu_dma_map_sg(struct device *dev, struct scatterlist *sgl, + int nents, enum dma_data_direction dir, + unsigned long attrs) +{ + int i; + struct scatterlist *sg; + + for_each_sg(sgl, sg, nents, i) { + sg_dma_address(sg) = sg_phys(sg); + sg_dma_len(sg) = sg->length; + __dma_page_cpu_to_dev(sg_dma_address(sg), sg_dma_len(sg), dir); + } + + return nents; +} + +static void arm_nommu_dma_unmap_sg(struct device *dev, struct scatterlist *sgl, + int nents, enum dma_data_direction dir, + unsigned long attrs) +{ + struct scatterlist *sg; + int i; + + for_each_sg(sgl, sg, nents, i) + __dma_page_dev_to_cpu(sg_dma_address(sg), sg_dma_len(sg), dir); +} + +static void arm_nommu_dma_sync_single_for_device(struct device *dev, + dma_addr_t handle, size_t size, enum dma_data_direction dir) +{ + __dma_page_cpu_to_dev(handle, size, dir); +} + +static void arm_nommu_dma_sync_single_for_cpu(struct device *dev, + dma_addr_t handle, size_t size, enum dma_data_direction dir) +{ + __dma_page_cpu_to_dev(handle, size, dir); +} + +static void arm_nommu_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sgl, + int nents, enum dma_data_direction dir) +{ + struct scatterlist *sg; + int i; + + for_each_sg(sgl, sg, nents, i) + __dma_page_cpu_to_dev(sg_dma_address(sg), sg_dma_len(sg), dir); +} + +static void arm_nommu_dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sgl, + int nents, enum dma_data_direction dir) +{ + struct scatterlist *sg; + int i; + + for_each_sg(sgl, sg, nents, i) + __dma_page_dev_to_cpu(sg_dma_address(sg), sg_dma_len(sg), dir); +} + +const struct dma_map_ops arm_nommu_dma_ops = { + .alloc = arm_nommu_dma_alloc, + .free = arm_nommu_dma_free, + .map_page = arm_nommu_dma_map_page, + .unmap_page = arm_nommu_dma_unmap_page, + .map_sg = arm_nommu_dma_map_sg, + .unmap_sg = arm_nommu_dma_unmap_sg, + .sync_single_for_device = arm_nommu_dma_sync_single_for_device, + .sync_single_for_cpu = arm_nommu_dma_sync_single_for_cpu, + .sync_sg_for_device = arm_nommu_dma_sync_sg_for_device, + .sync_sg_for_cpu = arm_nommu_dma_sync_sg_for_cpu, +}; +EXPORT_SYMBOL(arm_nommu_dma_ops); + +static const struct dma_map_ops *arm_nommu_get_dma_map_ops(bool coherent) +{ + return coherent ? &dma_noop_ops : &arm_nommu_dma_ops; +} + +void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size, + const struct iommu_ops *iommu, bool coherent) +{ + const struct dma_map_ops *dma_ops; + + if (IS_ENABLED(CONFIG_CPU_V7M)) { + /* + * Cache support for v7m is optional, so can be treated as + * coherent if no cache has been detected. Note that it is not + * enough to check if MPU is in use or not since in absense of + * MPU system memory map is used. + */ + dev->archdata.dma_coherent = (cacheid) ? coherent : true; + } else { + /* + * Assume coherent DMA in case MMU/MPU has not been set up. + */ + dev->archdata.dma_coherent = (get_cr() & CR_M) ? coherent : true; + } + + dma_ops = arm_nommu_get_dma_map_ops(dev->archdata.dma_coherent); + + set_dma_ops(dev, dma_ops); +} + +void arch_teardown_dma_ops(struct device *dev) +{ +} + +#define PREALLOC_DMA_DEBUG_ENTRIES 4096 + +static int __init dma_debug_do_init(void) +{ + dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); + return 0; +} +core_initcall(dma_debug_do_init); diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index c742dfd2967b..e7380bafbfa6 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -180,6 +180,11 @@ static void arm_dma_sync_single_for_device(struct device *dev, __dma_page_cpu_to_dev(page, offset, size, dir); } +static int arm_dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return dma_addr == ARM_MAPPING_ERROR; +} + const struct dma_map_ops arm_dma_ops = { .alloc = arm_dma_alloc, .free = arm_dma_free, @@ -193,6 +198,8 @@ const struct dma_map_ops arm_dma_ops = { .sync_single_for_device = arm_dma_sync_single_for_device, .sync_sg_for_cpu = arm_dma_sync_sg_for_cpu, .sync_sg_for_device = arm_dma_sync_sg_for_device, + .mapping_error = arm_dma_mapping_error, + .dma_supported = arm_dma_supported, }; EXPORT_SYMBOL(arm_dma_ops); @@ -211,6 +218,8 @@ const struct dma_map_ops arm_coherent_dma_ops = { .get_sgtable = arm_dma_get_sgtable, .map_page = arm_coherent_dma_map_page, .map_sg = arm_dma_map_sg, + .mapping_error = arm_dma_mapping_error, + .dma_supported = arm_dma_supported, }; EXPORT_SYMBOL(arm_coherent_dma_ops); @@ -344,8 +353,6 @@ static void __dma_free_buffer(struct page *page, size_t size) } } -#ifdef CONFIG_MMU - static void *__alloc_from_contiguous(struct device *dev, size_t size, pgprot_t prot, struct page **ret_page, const void *caller, bool want_vaddr, @@ -647,22 +654,6 @@ static inline pgprot_t __get_dma_pgprot(unsigned long attrs, pgprot_t prot) return prot; } -#define nommu() 0 - -#else /* !CONFIG_MMU */ - -#define nommu() 1 - -#define __get_dma_pgprot(attrs, prot) __pgprot(0) -#define __alloc_remap_buffer(dev, size, gfp, prot, ret, c, wv) NULL -#define __alloc_from_pool(size, ret_page) NULL -#define __alloc_from_contiguous(dev, size, prot, ret, c, wv, coherent_flag, gfp) NULL -#define __free_from_pool(cpu_addr, size) do { } while (0) -#define __free_from_contiguous(dev, page, cpu_addr, size, wv) do { } while (0) -#define __dma_free_remap(cpu_addr, size) do { } while (0) - -#endif /* CONFIG_MMU */ - static void *__alloc_simple_buffer(struct device *dev, size_t size, gfp_t gfp, struct page **ret_page) { @@ -799,13 +790,13 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp &= ~(__GFP_COMP); args.gfp = gfp; - *handle = DMA_ERROR_CODE; + *handle = ARM_MAPPING_ERROR; allowblock = gfpflags_allow_blocking(gfp); cma = allowblock ? dev_get_cma_area(dev) : false; if (cma) buf->allocator = &cma_allocator; - else if (nommu() || is_coherent) + else if (is_coherent) buf->allocator = &simple_allocator; else if (allowblock) buf->allocator = &remap_allocator; @@ -854,8 +845,7 @@ static int __arm_dma_mmap(struct device *dev, struct vm_area_struct *vma, void *cpu_addr, dma_addr_t dma_addr, size_t size, unsigned long attrs) { - int ret = -ENXIO; -#ifdef CONFIG_MMU + int ret; unsigned long nr_vma_pages = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; unsigned long nr_pages = PAGE_ALIGN(size) >> PAGE_SHIFT; unsigned long pfn = dma_to_pfn(dev, dma_addr); @@ -870,10 +860,6 @@ static int __arm_dma_mmap(struct device *dev, struct vm_area_struct *vma, vma->vm_end - vma->vm_start, vma->vm_page_prot); } -#else - ret = vm_iomap_memory(vma, vma->vm_start, - (vma->vm_end - vma->vm_start)); -#endif /* CONFIG_MMU */ return ret; } @@ -892,9 +878,7 @@ int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma, void *cpu_addr, dma_addr_t dma_addr, size_t size, unsigned long attrs) { -#ifdef CONFIG_MMU vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot); -#endif /* CONFIG_MMU */ return __arm_dma_mmap(dev, vma, cpu_addr, dma_addr, size, attrs); } @@ -1177,11 +1161,10 @@ void arm_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, * during bus mastering, then you would pass 0x00ffffff as the mask * to this function. */ -int dma_supported(struct device *dev, u64 mask) +int arm_dma_supported(struct device *dev, u64 mask) { return __dma_supported(dev, mask, false); } -EXPORT_SYMBOL(dma_supported); #define PREALLOC_DMA_DEBUG_ENTRIES 4096 @@ -1254,7 +1237,7 @@ static inline dma_addr_t __alloc_iova(struct dma_iommu_mapping *mapping, if (i == mapping->nr_bitmaps) { if (extend_iommu_mapping(mapping)) { spin_unlock_irqrestore(&mapping->lock, flags); - return DMA_ERROR_CODE; + return ARM_MAPPING_ERROR; } start = bitmap_find_next_zero_area(mapping->bitmaps[i], @@ -1262,7 +1245,7 @@ static inline dma_addr_t __alloc_iova(struct dma_iommu_mapping *mapping, if (start > mapping->bits) { spin_unlock_irqrestore(&mapping->lock, flags); - return DMA_ERROR_CODE; + return ARM_MAPPING_ERROR; } bitmap_set(mapping->bitmaps[i], start, count); @@ -1445,7 +1428,7 @@ __iommu_create_mapping(struct device *dev, struct page **pages, size_t size, int i; dma_addr = __alloc_iova(mapping, size); - if (dma_addr == DMA_ERROR_CODE) + if (dma_addr == ARM_MAPPING_ERROR) return dma_addr; iova = dma_addr; @@ -1472,7 +1455,7 @@ __iommu_create_mapping(struct device *dev, struct page **pages, size_t size, fail: iommu_unmap(mapping->domain, dma_addr, iova-dma_addr); __free_iova(mapping, dma_addr, size); - return DMA_ERROR_CODE; + return ARM_MAPPING_ERROR; } static int __iommu_remove_mapping(struct device *dev, dma_addr_t iova, size_t size) @@ -1533,7 +1516,7 @@ static void *__iommu_alloc_simple(struct device *dev, size_t size, gfp_t gfp, return NULL; *handle = __iommu_create_mapping(dev, &page, size, attrs); - if (*handle == DMA_ERROR_CODE) + if (*handle == ARM_MAPPING_ERROR) goto err_mapping; return addr; @@ -1561,7 +1544,7 @@ static void *__arm_iommu_alloc_attrs(struct device *dev, size_t size, struct page **pages; void *addr = NULL; - *handle = DMA_ERROR_CODE; + *handle = ARM_MAPPING_ERROR; size = PAGE_ALIGN(size); if (coherent_flag == COHERENT || !gfpflags_allow_blocking(gfp)) @@ -1582,7 +1565,7 @@ static void *__arm_iommu_alloc_attrs(struct device *dev, size_t size, return NULL; *handle = __iommu_create_mapping(dev, pages, size, attrs); - if (*handle == DMA_ERROR_CODE) + if (*handle == ARM_MAPPING_ERROR) goto err_buffer; if (attrs & DMA_ATTR_NO_KERNEL_MAPPING) @@ -1732,10 +1715,10 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg, int prot; size = PAGE_ALIGN(size); - *handle = DMA_ERROR_CODE; + *handle = ARM_MAPPING_ERROR; iova_base = iova = __alloc_iova(mapping, size); - if (iova == DMA_ERROR_CODE) + if (iova == ARM_MAPPING_ERROR) return -ENOMEM; for (count = 0, s = sg; count < (size >> PAGE_SHIFT); s = sg_next(s)) { @@ -1775,7 +1758,7 @@ static int __iommu_map_sg(struct device *dev, struct scatterlist *sg, int nents, for (i = 1; i < nents; i++) { s = sg_next(s); - s->dma_address = DMA_ERROR_CODE; + s->dma_address = ARM_MAPPING_ERROR; s->dma_length = 0; if (s->offset || (size & ~PAGE_MASK) || size + s->length > max) { @@ -1950,7 +1933,7 @@ static dma_addr_t arm_coherent_iommu_map_page(struct device *dev, struct page *p int ret, prot, len = PAGE_ALIGN(size + offset); dma_addr = __alloc_iova(mapping, len); - if (dma_addr == DMA_ERROR_CODE) + if (dma_addr == ARM_MAPPING_ERROR) return dma_addr; prot = __dma_info_to_prot(dir, attrs); @@ -1962,7 +1945,7 @@ static dma_addr_t arm_coherent_iommu_map_page(struct device *dev, struct page *p return dma_addr + offset; fail: __free_iova(mapping, dma_addr, len); - return DMA_ERROR_CODE; + return ARM_MAPPING_ERROR; } /** @@ -2056,7 +2039,7 @@ static dma_addr_t arm_iommu_map_resource(struct device *dev, size_t len = PAGE_ALIGN(size + offset); dma_addr = __alloc_iova(mapping, len); - if (dma_addr == DMA_ERROR_CODE) + if (dma_addr == ARM_MAPPING_ERROR) return dma_addr; prot = __dma_info_to_prot(dir, attrs) | IOMMU_MMIO; @@ -2068,7 +2051,7 @@ static dma_addr_t arm_iommu_map_resource(struct device *dev, return dma_addr + offset; fail: __free_iova(mapping, dma_addr, len); - return DMA_ERROR_CODE; + return ARM_MAPPING_ERROR; } /** @@ -2140,6 +2123,9 @@ const struct dma_map_ops iommu_ops = { .map_resource = arm_iommu_map_resource, .unmap_resource = arm_iommu_unmap_resource, + + .mapping_error = arm_dma_mapping_error, + .dma_supported = arm_dma_supported, }; const struct dma_map_ops iommu_coherent_ops = { @@ -2156,6 +2142,9 @@ const struct dma_map_ops iommu_coherent_ops = { .map_resource = arm_iommu_map_resource, .unmap_resource = arm_iommu_unmap_resource, + + .mapping_error = arm_dma_mapping_error, + .dma_supported = arm_dma_supported, }; /** @@ -2311,7 +2300,14 @@ int arm_iommu_attach_device(struct device *dev, } EXPORT_SYMBOL_GPL(arm_iommu_attach_device); -static void __arm_iommu_detach_device(struct device *dev) +/** + * arm_iommu_detach_device + * @dev: valid struct device pointer + * + * Detaches the provided device from a previously attached map. + * This voids the dma operations (dma_map_ops pointer) + */ +void arm_iommu_detach_device(struct device *dev) { struct dma_iommu_mapping *mapping; @@ -2324,22 +2320,10 @@ static void __arm_iommu_detach_device(struct device *dev) iommu_detach_device(mapping->domain, dev); kref_put(&mapping->kref, release_iommu_mapping); to_dma_iommu_mapping(dev) = NULL; + set_dma_ops(dev, NULL); pr_debug("Detached IOMMU controller from %s device.\n", dev_name(dev)); } - -/** - * arm_iommu_detach_device - * @dev: valid struct device pointer - * - * Detaches the provided device from a previously attached map. - * This voids the dma operations (dma_map_ops pointer) - */ -void arm_iommu_detach_device(struct device *dev) -{ - __arm_iommu_detach_device(dev); - set_dma_ops(dev, NULL); -} EXPORT_SYMBOL_GPL(arm_iommu_detach_device); static const struct dma_map_ops *arm_get_iommu_dma_map_ops(bool coherent) @@ -2379,7 +2363,7 @@ static void arm_teardown_iommu_dma_ops(struct device *dev) if (!mapping) return; - __arm_iommu_detach_device(dev); + arm_iommu_detach_device(dev); arm_iommu_release_mapping(mapping); } @@ -2430,9 +2414,13 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size, dev->dma_ops = xen_dma_ops; } #endif + dev->archdata.dma_ops_setup = true; } void arch_teardown_dma_ops(struct device *dev) { + if (!dev->archdata.dma_ops_setup) + return; + arm_teardown_iommu_dma_ops(dev); } diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 2239fde10b80..f0701d8d24df 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -90,7 +90,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, vma = find_vma(mm, addr); if (TASK_SIZE - len >= addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma))) return addr; } @@ -141,7 +141,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, addr = PAGE_ALIGN(addr); vma = find_vma(mm, addr); if (TASK_SIZE - len >= addr && - (!vma || addr + len <= vma->vm_start)) + (!vma || addr + len <= vm_start_gap(vma))) return addr; } diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 31af3cb59a60..e46a6a446cdd 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -1218,15 +1218,15 @@ void __init adjust_lowmem_bounds(void) high_memory = __va(arm_lowmem_limit - 1) + 1; + if (!memblock_limit) + memblock_limit = arm_lowmem_limit; + /* * Round the memblock limit down to a pmd size. This * helps to ensure that we will allocate memory from the * last full pmd, which should be mapped. */ - if (memblock_limit) - memblock_limit = round_down(memblock_limit, PMD_SIZE); - if (!memblock_limit) - memblock_limit = arm_lowmem_limit; + memblock_limit = round_down(memblock_limit, PMD_SIZE); if (!IS_ENABLED(CONFIG_HIGHMEM) || cache_is_vipt_aliasing()) { if (memblock_end_of_DRAM() > arm_lowmem_limit) { diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index 0d40c285bd86..f944836da8a2 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -25,11 +25,6 @@ ldr \rd, [\rn, #VMA_VM_FLAGS] .endm - .macro tsk_mm, rd, rn - ldr \rd, [\rn, #TI_TASK] - ldr \rd, [\rd, #TSK_ACTIVE_MM] - .endm - /* * act_mm - get current->active_mm */ @@ -37,7 +32,10 @@ bic \rd, sp, #8128 bic \rd, \rd, #63 ldr \rd, [\rd, #TI_TASK] - ldr \rd, [\rd, #TSK_ACTIVE_MM] + .if (TSK_ACTIVE_MM > IMM12_MASK) + add \rd, \rd, #TSK_ACTIVE_MM & ~IMM12_MASK + .endif + ldr \rd, [\rd, #TSK_ACTIVE_MM & IMM12_MASK] .endm /* diff --git a/arch/arm/probes/kprobes/core.c b/arch/arm/probes/kprobes/core.c index ad1f4e6a9e33..52d1cd14fda4 100644 --- a/arch/arm/probes/kprobes/core.c +++ b/arch/arm/probes/kprobes/core.c @@ -182,7 +182,8 @@ void __kprobes kprobes_remove_breakpoint(void *addr, unsigned int insn) .addr = addr, .insn = insn, }; - stop_machine(__kprobes_remove_breakpoint, &p, cpu_online_mask); + stop_machine_cpuslocked(__kprobes_remove_breakpoint, &p, + cpu_online_mask); } void __kprobes arch_disarm_kprobe(struct kprobe *p) diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c index f0325d96b97a..785d2a562a23 100644 --- a/arch/arm/xen/mm.c +++ b/arch/arm/xen/mm.c @@ -185,23 +185,6 @@ EXPORT_SYMBOL_GPL(xen_destroy_contiguous_region); const struct dma_map_ops *xen_dma_ops; EXPORT_SYMBOL(xen_dma_ops); -static const struct dma_map_ops xen_swiotlb_dma_ops = { - .alloc = xen_swiotlb_alloc_coherent, - .free = xen_swiotlb_free_coherent, - .sync_single_for_cpu = xen_swiotlb_sync_single_for_cpu, - .sync_single_for_device = xen_swiotlb_sync_single_for_device, - .sync_sg_for_cpu = xen_swiotlb_sync_sg_for_cpu, - .sync_sg_for_device = xen_swiotlb_sync_sg_for_device, - .map_sg = xen_swiotlb_map_sg_attrs, - .unmap_sg = xen_swiotlb_unmap_sg_attrs, - .map_page = xen_swiotlb_map_page, - .unmap_page = xen_swiotlb_unmap_page, - .dma_supported = xen_swiotlb_dma_supported, - .set_dma_mask = xen_swiotlb_set_dma_mask, - .mmap = xen_swiotlb_dma_mmap, - .get_sgtable = xen_swiotlb_get_sgtable, -}; - int __init xen_mm_init(void) { struct gnttab_cache_flush cflush; diff --git a/arch/arm/xen/p2m.c b/arch/arm/xen/p2m.c index 0ed01f2d5ee4..e71eefa2e427 100644 --- a/arch/arm/xen/p2m.c +++ b/arch/arm/xen/p2m.c @@ -144,17 +144,17 @@ bool __set_phys_to_machine_multi(unsigned long pfn, return true; } - p2m_entry = kzalloc(sizeof(struct xen_p2m_entry), GFP_NOWAIT); - if (!p2m_entry) { - pr_warn("cannot allocate xen_p2m_entry\n"); + p2m_entry = kzalloc(sizeof(*p2m_entry), GFP_NOWAIT); + if (!p2m_entry) return false; - } + p2m_entry->pfn = pfn; p2m_entry->nr_pages = nr_pages; p2m_entry->mfn = mfn; write_lock_irqsave(&p2m_lock, irqflags); - if ((rc = xen_add_phys_to_mach_entry(p2m_entry)) < 0) { + rc = xen_add_phys_to_mach_entry(p2m_entry); + if (rc < 0) { write_unlock_irqrestore(&p2m_lock, irqflags); return false; } |