diff options
Diffstat (limited to 'arch/arm')
224 files changed, 1524 insertions, 662 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c5408bf1bf43..92622eb5cc0d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -253,6 +253,7 @@ config ARCH_REALVIEW select GENERIC_TIME select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB + select GPIO_PL061 if GPIOLIB help This enables support for ARM Ltd RealView boards. diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 0f23009170a1..c5191b1532e8 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -172,7 +172,7 @@ not_angel: adr r0, LC0 ARM( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip, sp}) THUMB( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip} ) - THUMB( ldr sp, [r0, #28] ) + THUMB( ldr sp, [r0, #32] ) subs r0, r0, r1 @ calculate the delta offset @ if delta is zero, we are @@ -685,8 +685,8 @@ proc_types: W(b) __armv4_mmu_cache_off W(b) __armv4_mmu_cache_flush - .word 0x56056930 - .word 0xff0ffff0 @ PXA935 + .word 0x56056900 + .word 0xffffff00 @ PXA9xx W(b) __armv4_mmu_cache_on W(b) __armv4_mmu_cache_off W(b) __armv4_mmu_cache_flush @@ -697,12 +697,6 @@ proc_types: W(b) __armv4_mmu_cache_off W(b) __armv5tej_mmu_cache_flush - .word 0x56056930 - .word 0xff0ffff0 @ PXA935 - W(b) __armv4_mmu_cache_on - W(b) __armv4_mmu_cache_off - W(b) __armv4_mmu_cache_flush - .word 0x56050000 @ Feroceon .word 0xff0f0000 W(b) __armv4_mmu_cache_on diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c index 6416d5b5020d..dba4c1da63ed 100644 --- a/arch/arm/common/clkdev.c +++ b/arch/arm/common/clkdev.c @@ -18,6 +18,7 @@ #include <linux/string.h> #include <linux/mutex.h> #include <linux/clk.h> +#include <linux/slab.h> #include <asm/clkdev.h> #include <mach/clkdev.h> diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index ee1d3b85eb65..7974baacafce 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -21,7 +21,6 @@ #include <linux/ptrace.h> #include <linux/interrupt.h> #include <linux/mm.h> -#include <linux/slab.h> #include <linux/init.h> #include <linux/ioport.h> #include <linux/irq.h> diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 90ae00b631c2..9dff07c80ddb 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -290,7 +290,7 @@ static int locomo_suspend(struct platform_device *dev, pm_message_t state) save->LCM_GPO = locomo_readl(lchip->base + LOCOMO_GPO); /* GPIO */ locomo_writel(0x00, lchip->base + LOCOMO_GPO); save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT); /* SPI */ - locomo_writel(0x40, lchip->base + LOCOMO_SPICT); + locomo_writel(0x40, lchip->base + LOCOMO_SPI + LOCOMO_SPICT); save->LCM_GPE = locomo_readl(lchip->base + LOCOMO_GPE); /* GPIO */ locomo_writel(0x00, lchip->base + LOCOMO_GPE); save->LCM_ASD = locomo_readl(lchip->base + LOCOMO_ASD); /* ADSTART */ @@ -418,7 +418,7 @@ __locomo_probe(struct device *me, struct resource *mem, int irq) /* Longtime timer */ locomo_writel(0, lchip->base + LOCOMO_LTINT); /* SPI */ - locomo_writel(0, lchip->base + LOCOMO_SPIIE); + locomo_writel(0, lchip->base + LOCOMO_SPI + LOCOMO_SPIIE); locomo_writel(6 + 8 + 320 + 30 - 10, lchip->base + LOCOMO_ASD); r = locomo_readl(lchip->base + LOCOMO_ASD); @@ -707,7 +707,7 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */ if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */ printk(KERN_WARNING "locomo: m62332_senddata Error 1\n"); - return; + goto out; } /* Send Sub address (LSB is channel select) */ @@ -735,7 +735,7 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */ if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */ printk(KERN_WARNING "locomo: m62332_senddata Error 2\n"); - return; + goto out; } /* Send DAC data */ @@ -760,9 +760,9 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */ if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */ printk(KERN_WARNING "locomo: m62332_senddata Error 3\n"); - return; } +out: /* stop */ r = locomo_readl(mapbase + LOCOMO_DAC); r &= ~(LOCOMO_DAC_SCLOEB); diff --git a/arch/arm/configs/bcmring_defconfig b/arch/arm/configs/bcmring_defconfig index 1e12167c89b7..6ac6693299bc 100644 --- a/arch/arm/configs/bcmring_defconfig +++ b/arch/arm/configs/bcmring_defconfig @@ -1,13 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc3 -# Fri Jul 17 12:07:28 2009 +# Linux kernel version: 2.6.34-rc2 +# Mon Mar 29 12:01:41 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y +CONFIG_HAVE_PROC_CPU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,6 +18,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -32,6 +33,12 @@ CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y @@ -43,21 +50,22 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_GROUP_SCHED is not set -# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y @@ -75,19 +83,21 @@ CONFIG_FUTEX=y # CONFIG_EVENTFD is not set CONFIG_SHMEM=y # CONFIG_AIO is not set +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # -# Performance Counters +# Kernel Performance Events And Counters # +CONFIG_PERF_EVENTS=y +CONFIG_PERF_COUNTERS=y # CONFIG_VM_EVENT_COUNTERS is not set # CONFIG_SLUB_DEBUG is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y @@ -115,24 +125,53 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set +CONFIG_ARCH_BCMRING=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set @@ -149,6 +188,7 @@ CONFIG_DEFAULT_IOSCHED="noop" # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set # CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set @@ -157,19 +197,26 @@ CONFIG_DEFAULT_IOSCHED="noop" # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5P6442 is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -CONFIG_ARCH_BCMRING=y # CONFIG_ARCH_FPGA11107 is not set CONFIG_ARCH_BCM11107=y @@ -185,7 +232,7 @@ CONFIG_CPU_V6=y CONFIG_CPU_32v6K=y CONFIG_CPU_32v6=y CONFIG_CPU_ABRT_EV6=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_V6=y CONFIG_CPU_CACHE_V6=y CONFIG_CPU_CACHE_VIPT=y CONFIG_CPU_COPY_V6=y @@ -201,6 +248,8 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_411920 is not set CONFIG_COMMON_CLKDEV=y @@ -222,6 +271,8 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y @@ -229,6 +280,7 @@ CONFIG_AEABI=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set +CONFIG_HW_PERF_EVENTS=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -240,8 +292,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y CONFIG_UACCESS_WITH_MEMCPY=y @@ -335,9 +386,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -433,6 +484,10 @@ CONFIG_MTD_NAND_BCM_UMI_HWCS=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set @@ -444,6 +499,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -452,6 +508,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_NETDEVICES is not set # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -459,6 +516,7 @@ CONFIG_HAVE_IDE=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -508,6 +566,7 @@ CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -519,13 +578,17 @@ CONFIG_LEGACY_PTY_COUNT=64 # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -541,6 +604,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set # @@ -566,14 +630,17 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -589,9 +656,12 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set # CONFIG_FILE_LOCKING is not set # CONFIG_FSNOTIFY is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +# CONFIG_INOTIFY_USER is not set # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -647,6 +717,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -657,7 +728,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # @@ -675,11 +745,12 @@ CONFIG_MSDOS_PARTITION=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set CONFIG_HEADERS_CHECK=y # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set CONFIG_FRAME_POINTER=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -693,6 +764,7 @@ CONFIG_TRACING_SUPPORT=y CONFIG_HAVE_ARCH_KGDB=y # CONFIG_ARM_UNWIND is not set # CONFIG_DEBUG_USER is not set +# CONFIG_OC_ETM is not set # # Security options @@ -700,7 +772,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_BINARY_PRINTF is not set diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig index 95d2becfc664..21f2bff8a363 100644 --- a/arch/arm/configs/imote2_defconfig +++ b/arch/arm/configs/imote2_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc8 -# Sat Feb 13 21:48:53 2010 +# Linux kernel version: 2.6.34-rc2 +# Thu Apr 8 14:49:08 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_HAVE_PROC_CPU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -19,6 +20,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_ARCH_HAS_CPUFREQ=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_ARCH_MTD_XIP=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 @@ -60,11 +62,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -97,10 +94,14 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y @@ -184,6 +185,7 @@ CONFIG_MMU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set @@ -193,7 +195,6 @@ CONFIG_MMU=y # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -210,21 +211,26 @@ CONFIG_MMU=y # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_PNX4008 is not set CONFIG_ARCH_PXA=y # CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5P6442 is not set # CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_BCMRING is not set -# CONFIG_ARCH_U8500 is not set # # Intel PXA2xx/PXA3xx Implementations @@ -253,6 +259,7 @@ CONFIG_ARCH_PXA=y # CONFIG_MACH_EM_X270 is not set # CONFIG_MACH_EXEDA is not set # CONFIG_MACH_CM_X300 is not set +# CONFIG_MACH_CAPC7117 is not set # CONFIG_ARCH_GUMSTIX is not set CONFIG_MACH_INTELMOTE2=y # CONFIG_MACH_STARGATE2 is not set @@ -275,7 +282,11 @@ CONFIG_MACH_INTELMOTE2=y # CONFIG_PXA_EZX is not set # CONFIG_MACH_MP900C is not set # CONFIG_ARCH_PXA_PALM is not set +# CONFIG_MACH_RAUMFELD_RC is not set +# CONFIG_MACH_RAUMFELD_CONNECTOR is not set +# CONFIG_MACH_RAUMFELD_SPEAKER is not set # CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_ICONTROL is not set # CONFIG_ARCH_PXA_ESERIES is not set CONFIG_PXA27x=y CONFIG_PXA_SSP=y @@ -302,6 +313,7 @@ CONFIG_ARM_THUMB=y CONFIG_ARM_L1_CACHE_SHIFT=5 CONFIG_IWMMXT=y CONFIG_XSCALE_PMU=y +CONFIG_CPU_HAS_PMU=y CONFIG_COMMON_CLKDEV=y # @@ -352,7 +364,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug" +CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS2,115200 mem=32M" # CONFIG_XIP_KERNEL is not set CONFIG_KEXEC=y CONFIG_ATAGS_PROC=y @@ -360,24 +372,8 @@ CONFIG_ATAGS_PROC=y # # CPU Power Management # -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=y -CONFIG_CPU_FREQ_DEBUG=y -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=m -CONFIG_CPU_FREQ_GOV_USERSPACE=m -CONFIG_CPU_FREQ_GOV_ONDEMAND=m -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_IDLE_GOV_MENU=y +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set # # Floating point emulation @@ -409,6 +405,7 @@ CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_APM_EMULATION=y CONFIG_PM_RUNTIME=y +CONFIG_PM_OPS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -416,7 +413,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -506,6 +502,7 @@ CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_CT is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_LED=m @@ -622,6 +619,7 @@ CONFIG_IP6_NF_RAW=m # CONFIG_ATM is not set CONFIG_STP=m CONFIG_BRIDGE=m +# CONFIG_BRIDGE_IGMP_SNOOPING is not set # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set @@ -646,32 +644,7 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set -CONFIG_BT=y -CONFIG_BT_L2CAP=y -CONFIG_BT_SCO=y -CONFIG_BT_RFCOMM=y -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=y -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=y - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIBTUSB=m -CONFIG_BT_HCIBTSDIO=m -CONFIG_BT_HCIUART=y -CONFIG_BT_HCIUART_H4=y -# CONFIG_BT_HCIUART_BCSP is not set -# CONFIG_BT_HCIUART_LL is not set -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIVHCI=m -CONFIG_BT_MRVL=m -CONFIG_BT_MRVL_SDIO=m -# CONFIG_BT_ATH3K is not set +# CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y # CONFIG_WIRELESS is not set @@ -687,7 +660,8 @@ CONFIG_FIB_RULES=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_DEVTMPFS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m @@ -703,9 +677,9 @@ CONFIG_MTD=y # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_AFS_PARTS=y +CONFIG_MTD_AR7_PARTS=y # # User Modules And Translation Layers @@ -812,6 +786,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -965,6 +940,7 @@ CONFIG_SERIAL_PXA=y CONFIG_SERIAL_PXA_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -993,6 +969,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_PXA=y # CONFIG_I2C_PXA_SLAVE is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -1006,15 +983,9 @@ CONFIG_I2C_PXA=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -1046,10 +1017,12 @@ CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set @@ -1093,10 +1066,12 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set @@ -1105,22 +1080,25 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TC6393XB is not set CONFIG_PMIC_DA903X=y # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set -# CONFIG_MFD_88PM8607 is not set # CONFIG_AB4500_CORE is not set CONFIG_REGULATOR=y CONFIG_REGULATOR_DEBUG=y +# CONFIG_REGULATOR_DUMMY is not set # CONFIG_REGULATOR_FIXED_VOLTAGE is not set CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_USERSPACE_CONSUMER=y # CONFIG_REGULATOR_BQ24022 is not set # CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_MAX8649 is not set # CONFIG_REGULATOR_MAX8660 is not set CONFIG_REGULATOR_DA903X=y # CONFIG_REGULATOR_LP3971 is not set @@ -1218,6 +1196,7 @@ CONFIG_VIDEO_IR_I2C=y # CONFIG_VIDEO_SAA7191 is not set # CONFIG_VIDEO_TVP514X is not set # CONFIG_VIDEO_TVP5150 is not set +# CONFIG_VIDEO_TVP7002 is not set # CONFIG_VIDEO_VPX3220 is not set # @@ -1264,15 +1243,7 @@ CONFIG_SOC_CAMERA_MT9M111=y CONFIG_VIDEO_PXA27x=y # CONFIG_VIDEO_SH_MOBILE_CEU is not set # CONFIG_V4L_USB_DRIVERS is not set -CONFIG_RADIO_ADAPTERS=y -# CONFIG_I2C_SI4713 is not set -# CONFIG_RADIO_SI4713 is not set -# CONFIG_USB_DSBR is not set -# CONFIG_RADIO_SI470X is not set -# CONFIG_USB_MR800 is not set -CONFIG_RADIO_TEA5764=y -CONFIG_RADIO_TEA5764_XTAL=y -# CONFIG_RADIO_TEF6862 is not set +# CONFIG_RADIO_ADAPTERS is not set # CONFIG_DAB is not set # @@ -1398,8 +1369,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_APPLE=m -# CONFIG_HID_WACOM is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1477,7 +1446,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1489,7 +1457,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set @@ -1529,6 +1496,7 @@ CONFIG_USB_ETH=y # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_NOKIA is not set # CONFIG_USB_G_MULTI is not set # @@ -1555,8 +1523,6 @@ CONFIG_SDIO_UART=m # CONFIG_MMC_PXA=y # CONFIG_MMC_SDHCI is not set -# CONFIG_MMC_AT91 is not set -# CONFIG_MMC_ATMELMCI is not set CONFIG_MMC_SPI=y # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y @@ -1574,11 +1540,11 @@ CONFIG_LEDS_LP3944=y # CONFIG_LEDS_REGULATOR is not set # CONFIG_LEDS_BD2802 is not set # CONFIG_LEDS_LT3593 is not set +CONFIG_LEDS_TRIGGERS=y # # LED Triggers # -CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_BACKLIGHT=y @@ -1656,7 +1622,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # # CONFIG_RTC_DRV_SA1100 is not set -# CONFIG_RTC_DRV_PXA is not set +CONFIG_RTC_DRV_PXA=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set @@ -1681,19 +1647,10 @@ CONFIG_EXT3_FS_XATTR=y CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=m -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_XFS_FS=m -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_DEBUG is not set +# CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set @@ -1716,9 +1673,7 @@ CONFIG_CUSE=m # # CD-ROM/DVD Filesystems # -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y +# CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # @@ -1750,12 +1705,14 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_FS_WBUF_VERIFY=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y CONFIG_JFFS2_COMPRESSION_OPTIONS=y CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_LZO=y @@ -1765,6 +1722,7 @@ CONFIG_JFFS2_RUBIN=y CONFIG_JFFS2_CMODE_PRIORITY=y # CONFIG_JFFS2_CMODE_SIZE is not set # CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=m CONFIG_SQUASHFS=m # CONFIG_SQUASHFS_EMBEDDED is not set @@ -1802,6 +1760,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CEPH_FS is not set CONFIG_CIFS=m CONFIG_CIFS_STATS=y # CONFIG_CIFS_STATS2 is not set @@ -1895,6 +1854,7 @@ CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y +# CONFIG_PROVE_RCU is not set CONFIG_LOCKDEP=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_LOCKDEP is not set @@ -1918,6 +1878,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set @@ -2061,9 +2022,9 @@ CONFIG_CRC32=y CONFIG_CRC7=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_LZO_COMPRESS=m -CONFIG_LZO_DECOMPRESS=m +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y @@ -2075,3 +2036,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig index 216ad00948af..9405e32783de 100644 --- a/arch/arm/configs/n8x0_defconfig +++ b/arch/arm/configs/n8x0_defconfig @@ -1058,7 +1058,6 @@ CONFIG_JFFS2_CMODE_PRIORITY=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig index f5c6e11cf189..881faea03d79 100644 --- a/arch/arm/configs/omap_zoom2_defconfig +++ b/arch/arm/configs/omap_zoom2_defconfig @@ -661,7 +661,7 @@ CONFIG_DEVKMEM=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig index ea9a5012d332..5e55b550a408 100644 --- a/arch/arm/configs/omap_zoom3_defconfig +++ b/arch/arm/configs/omap_zoom3_defconfig @@ -680,7 +680,7 @@ CONFIG_DEVKMEM=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig index 45135ffadc57..473f9e13f08b 100644 --- a/arch/arm/configs/rx51_defconfig +++ b/arch/arm/configs/rx51_defconfig @@ -59,8 +59,6 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -480,7 +478,6 @@ CONFIG_BT_HIDP=m # CONFIG_BT_HCIBFUSB is not set # CONFIG_BT_HCIVHCI is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y CONFIG_CFG80211=y # CONFIG_CFG80211_REG_DEBUG is not set diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 00f46d9ce299..6e8f05c8a1c8 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -149,10 +149,10 @@ #define USER(x...) \ 9999: x; \ - .section __ex_table,"a"; \ + .pushsection __ex_table,"a"; \ .align 3; \ .long 9999b,9001f; \ - .previous + .popsection /* * SMP data memory barrier @@ -193,10 +193,10 @@ .error "Unsupported inc macro argument" .endif - .section __ex_table,"a" + .pushsection __ex_table,"a" .align 3 .long 9999b, \abort - .previous + .popsection .endm .macro usracc, instr, reg, ptr, inc, cond, rept, abort @@ -234,10 +234,10 @@ .error "Unsupported inc macro argument" .endif - .section __ex_table,"a" + .pushsection __ex_table,"a" .align 3 .long 9999b, \abort - .previous + .popsection .endr .endm diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 72da7e045c6b..4656a24058d2 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -15,6 +15,7 @@ #include <asm/glue.h> #include <asm/shmparam.h> #include <asm/cachetype.h> +#include <asm/outercache.h> #define CACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT) @@ -219,12 +220,6 @@ struct cpu_cache_fns { void (*dma_flush_range)(const void *, const void *); }; -struct outer_cache_fns { - void (*inv_range)(unsigned long, unsigned long); - void (*clean_range)(unsigned long, unsigned long); - void (*flush_range)(unsigned long, unsigned long); -}; - /* * Select the calling method */ @@ -281,37 +276,6 @@ extern void dmac_flush_range(const void *, const void *); #endif -#ifdef CONFIG_OUTER_CACHE - -extern struct outer_cache_fns outer_cache; - -static inline void outer_inv_range(unsigned long start, unsigned long end) -{ - if (outer_cache.inv_range) - outer_cache.inv_range(start, end); -} -static inline void outer_clean_range(unsigned long start, unsigned long end) -{ - if (outer_cache.clean_range) - outer_cache.clean_range(start, end); -} -static inline void outer_flush_range(unsigned long start, unsigned long end) -{ - if (outer_cache.flush_range) - outer_cache.flush_range(start, end); -} - -#else - -static inline void outer_inv_range(unsigned long start, unsigned long end) -{ } -static inline void outer_clean_range(unsigned long start, unsigned long end) -{ } -static inline void outer_flush_range(unsigned long start, unsigned long end) -{ } - -#endif - /* * Copy user data from/to a page which is mapped into a different * processes address space. Really, we want to allow our "user @@ -407,6 +371,10 @@ static inline void __flush_icache_all(void) #ifdef CONFIG_ARM_ERRATA_411920 extern void v6_icache_inval_all(void); v6_icache_inval_all(); +#elif defined(CONFIG_SMP) && __LINUX_ARM_ARCH__ >= 7 + asm("mcr p15, 0, %0, c7, c1, 0 @ invalidate I-cache inner shareable\n" + : + : "r" (0)); #else asm("mcr p15, 0, %0, c7, c5, 0 @ invalidate I-cache\n" : diff --git a/arch/arm/include/asm/clkdev.h b/arch/arm/include/asm/clkdev.h index 7a0690da5e63..b56c1389b6fa 100644 --- a/arch/arm/include/asm/clkdev.h +++ b/arch/arm/include/asm/clkdev.h @@ -13,6 +13,7 @@ #define __ASM_CLKDEV_H struct clk; +struct device; struct clk_lookup { struct list_head node; diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index bff056489cc1..51662feb9f1d 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -9,6 +9,8 @@ #include <asm/ptrace.h> #include <asm/user.h> +struct task_struct; + typedef unsigned long elf_greg_t; typedef unsigned long elf_freg_t[3]; diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index bfcc15929a7f..540a044153a5 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -21,14 +21,14 @@ "2: strt %0, [%2]\n" \ " mov %0, #0\n" \ "3:\n" \ - " .section __ex_table,\"a\"\n" \ + " .pushsection __ex_table,\"a\"\n" \ " .align 3\n" \ " .long 1b, 4f, 2b, 4f\n" \ - " .previous\n" \ - " .section .fixup,\"ax\"\n" \ + " .popsection\n" \ + " .pushsection .fixup,\"ax\"\n" \ "4: mov %0, %4\n" \ " b 3b\n" \ - " .previous" \ + " .popsection" \ : "=&r" (ret), "=&r" (oldval) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") @@ -102,14 +102,14 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) " it eq @ explicit IT needed for the 2b label\n" "2: streqt %2, [%3]\n" "3:\n" - " .section __ex_table,\"a\"\n" + " .pushsection __ex_table,\"a\"\n" " .align 3\n" " .long 1b, 4f, 2b, 4f\n" - " .previous\n" - " .section .fixup,\"ax\"\n" + " .popsection\n" + " .pushsection .fixup,\"ax\"\n" "4: mov %0, %4\n" " b 3b\n" - " .previous" + " .popsection" : "=&r" (val) : "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT) : "cc", "memory"); diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h index 7f36d00600b4..feb988a7ec37 100644 --- a/arch/arm/include/asm/highmem.h +++ b/arch/arm/include/asm/highmem.h @@ -11,7 +11,11 @@ #define kmap_prot PAGE_KERNEL -#define flush_cache_kmaps() flush_cache_all() +#define flush_cache_kmaps() \ + do { \ + if (cache_is_vivt()) \ + flush_cache_all(); \ + } while (0) extern pte_t *pkmap_page_table; @@ -21,11 +25,20 @@ extern void *kmap_high(struct page *page); extern void *kmap_high_get(struct page *page); extern void kunmap_high(struct page *page); +extern void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte); +extern void kunmap_high_l1_vipt(struct page *page, pte_t saved_pte); + +/* + * The following functions are already defined by <linux/highmem.h> + * when CONFIG_HIGHMEM is not set. + */ +#ifdef CONFIG_HIGHMEM extern void *kmap(struct page *page); extern void kunmap(struct page *page); extern void *kmap_atomic(struct page *page, enum km_type type); extern void kunmap_atomic(void *kvaddr, enum km_type type); extern void *kmap_atomic_pfn(unsigned long pfn, enum km_type type); extern struct page *kmap_atomic_to_page(const void *ptr); +#endif #endif diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h index 328f14a8b790..237282f7c762 100644 --- a/arch/arm/include/asm/irq.h +++ b/arch/arm/include/asm/irq.h @@ -17,6 +17,7 @@ #ifndef __ASSEMBLY__ struct irqaction; +struct pt_regs; extern void migrate_irqs(void); extern void asm_do_IRQ(unsigned int, struct pt_regs *); diff --git a/arch/arm/include/asm/kmap_types.h b/arch/arm/include/asm/kmap_types.h index c019949a5189..c4b2ea3fbe42 100644 --- a/arch/arm/include/asm/kmap_types.h +++ b/arch/arm/include/asm/kmap_types.h @@ -18,6 +18,7 @@ enum km_type { KM_IRQ1, KM_SOFTIRQ0, KM_SOFTIRQ1, + KM_L1_CACHE, KM_L2_CACHE, KM_TYPE_NR }; diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h new file mode 100644 index 000000000000..25f76bae57ab --- /dev/null +++ b/arch/arm/include/asm/outercache.h @@ -0,0 +1,75 @@ +/* + * arch/arm/include/asm/outercache.h + * + * Copyright (C) 2010 ARM Ltd. + * Written by Catalin Marinas <catalin.marinas@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_OUTERCACHE_H +#define __ASM_OUTERCACHE_H + +struct outer_cache_fns { + void (*inv_range)(unsigned long, unsigned long); + void (*clean_range)(unsigned long, unsigned long); + void (*flush_range)(unsigned long, unsigned long); +#ifdef CONFIG_OUTER_CACHE_SYNC + void (*sync)(void); +#endif +}; + +#ifdef CONFIG_OUTER_CACHE + +extern struct outer_cache_fns outer_cache; + +static inline void outer_inv_range(unsigned long start, unsigned long end) +{ + if (outer_cache.inv_range) + outer_cache.inv_range(start, end); +} +static inline void outer_clean_range(unsigned long start, unsigned long end) +{ + if (outer_cache.clean_range) + outer_cache.clean_range(start, end); +} +static inline void outer_flush_range(unsigned long start, unsigned long end) +{ + if (outer_cache.flush_range) + outer_cache.flush_range(start, end); +} + +#else + +static inline void outer_inv_range(unsigned long start, unsigned long end) +{ } +static inline void outer_clean_range(unsigned long start, unsigned long end) +{ } +static inline void outer_flush_range(unsigned long start, unsigned long end) +{ } + +#endif + +#ifdef CONFIG_OUTER_CACHE_SYNC +static inline void outer_sync(void) +{ + if (outer_cache.sync) + outer_cache.sync(); +} +#else +static inline void outer_sync(void) +{ } +#endif + +#endif /* __ASM_OUTERCACHE_H */ diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h index 7be0978b2625..634f357be6bb 100644 --- a/arch/arm/include/asm/smp_twd.h +++ b/arch/arm/include/asm/smp_twd.h @@ -1,6 +1,23 @@ #ifndef __ASMARM_SMP_TWD_H #define __ASMARM_SMP_TWD_H +#define TWD_TIMER_LOAD 0x00 +#define TWD_TIMER_COUNTER 0x04 +#define TWD_TIMER_CONTROL 0x08 +#define TWD_TIMER_INTSTAT 0x0C + +#define TWD_WDOG_LOAD 0x20 +#define TWD_WDOG_COUNTER 0x24 +#define TWD_WDOG_CONTROL 0x28 +#define TWD_WDOG_INTSTAT 0x2C +#define TWD_WDOG_RESETSTAT 0x30 +#define TWD_WDOG_DISABLE 0x34 + +#define TWD_TIMER_CONTROL_ENABLE (1 << 0) +#define TWD_TIMER_CONTROL_ONESHOT (0 << 1) +#define TWD_TIMER_CONTROL_PERIODIC (1 << 1) +#define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2) + struct clock_event_device; extern void __iomem *twd_base; diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index ca88e6a84707..4ace45ec3ef8 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -60,6 +60,8 @@ #include <linux/linkage.h> #include <linux/irqflags.h> +#include <asm/outercache.h> + #define __exception __attribute__((section(".exception.text"))) struct thread_info; @@ -137,10 +139,12 @@ extern unsigned int user_debug; #define dmb() __asm__ __volatile__ ("" : : : "memory") #endif -#if __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP) -#define mb() dmb() +#ifdef CONFIG_ARCH_HAS_BARRIERS +#include <mach/barriers.h> +#elif __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP) +#define mb() do { dsb(); outer_sync(); } while (0) #define rmb() dmb() -#define wmb() dmb() +#define wmb() mb() #else #define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) #define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) @@ -152,9 +156,9 @@ extern unsigned int user_debug; #define smp_rmb() barrier() #define smp_wmb() barrier() #else -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() +#define smp_mb() dmb() +#define smp_rmb() dmb() +#define smp_wmb() dmb() #endif #define read_barrier_depends() do { } while(0) diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index e085e2c545eb..bd863d8608cd 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -46,6 +46,9 @@ #define TLB_V7_UIS_FULL (1 << 20) #define TLB_V7_UIS_ASID (1 << 21) +/* Inner Shareable BTB operation (ARMv7 MP extensions) */ +#define TLB_V7_IS_BTB (1 << 22) + #define TLB_L2CLEAN_FR (1 << 29) /* Feroceon */ #define TLB_DCLEAN (1 << 30) #define TLB_WB (1 << 31) @@ -183,7 +186,7 @@ #endif #ifdef CONFIG_SMP -#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \ +#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_V7_IS_BTB | \ TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID) #else #define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \ @@ -339,6 +342,12 @@ static inline void local_flush_tlb_all(void) dsb(); isb(); } + if (tlb_flag(TLB_V7_IS_BTB)) { + /* flush the branch target cache */ + asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc"); + dsb(); + isb(); + } } static inline void local_flush_tlb_mm(struct mm_struct *mm) @@ -376,6 +385,12 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm) asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); dsb(); } + if (tlb_flag(TLB_V7_IS_BTB)) { + /* flush the branch target cache */ + asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc"); + dsb(); + isb(); + } } static inline void @@ -416,6 +431,12 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); dsb(); } + if (tlb_flag(TLB_V7_IS_BTB)) { + /* flush the branch target cache */ + asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc"); + dsb(); + isb(); + } } static inline void local_flush_tlb_kernel_page(unsigned long kaddr) @@ -454,6 +475,12 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr) dsb(); isb(); } + if (tlb_flag(TLB_V7_IS_BTB)) { + /* flush the branch target cache */ + asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc"); + dsb(); + isb(); + } } /* diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 1d6bd40a4322..33e4a48fe103 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -229,16 +229,16 @@ do { \ __asm__ __volatile__( \ "1: ldrbt %1,[%2]\n" \ "2:\n" \ - " .section .fixup,\"ax\"\n" \ + " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ "3: mov %0, %3\n" \ " mov %1, #0\n" \ " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ + " .popsection\n" \ + " .pushsection __ex_table,\"a\"\n" \ " .align 3\n" \ " .long 1b, 3b\n" \ - " .previous" \ + " .popsection" \ : "+r" (err), "=&r" (x) \ : "r" (addr), "i" (-EFAULT) \ : "cc") @@ -265,16 +265,16 @@ do { \ __asm__ __volatile__( \ "1: ldrt %1,[%2]\n" \ "2:\n" \ - " .section .fixup,\"ax\"\n" \ + " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ "3: mov %0, %3\n" \ " mov %1, #0\n" \ " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ + " .popsection\n" \ + " .pushsection __ex_table,\"a\"\n" \ " .align 3\n" \ " .long 1b, 3b\n" \ - " .previous" \ + " .popsection" \ : "+r" (err), "=&r" (x) \ : "r" (addr), "i" (-EFAULT) \ : "cc") @@ -310,15 +310,15 @@ do { \ __asm__ __volatile__( \ "1: strbt %1,[%2]\n" \ "2:\n" \ - " .section .fixup,\"ax\"\n" \ + " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ "3: mov %0, %3\n" \ " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ + " .popsection\n" \ + " .pushsection __ex_table,\"a\"\n" \ " .align 3\n" \ " .long 1b, 3b\n" \ - " .previous" \ + " .popsection" \ : "+r" (err) \ : "r" (x), "r" (__pu_addr), "i" (-EFAULT) \ : "cc") @@ -343,15 +343,15 @@ do { \ __asm__ __volatile__( \ "1: strt %1,[%2]\n" \ "2:\n" \ - " .section .fixup,\"ax\"\n" \ + " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ "3: mov %0, %3\n" \ " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ + " .popsection\n" \ + " .pushsection __ex_table,\"a\"\n" \ " .align 3\n" \ " .long 1b, 3b\n" \ - " .previous" \ + " .popsection" \ : "+r" (err) \ : "r" (x), "r" (__pu_addr), "i" (-EFAULT) \ : "cc") @@ -371,16 +371,16 @@ do { \ THUMB( "1: strt " __reg_oper1 ", [%1]\n" ) \ THUMB( "2: strt " __reg_oper0 ", [%1, #4]\n" ) \ "3:\n" \ - " .section .fixup,\"ax\"\n" \ + " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ "4: mov %0, %3\n" \ " b 3b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ + " .popsection\n" \ + " .pushsection __ex_table,\"a\"\n" \ " .align 3\n" \ " .long 1b, 4b\n" \ " .long 2b, 4b\n" \ - " .previous" \ + " .popsection" \ : "+r" (err), "+r" (__pu_addr) \ : "r" (x), "i" (-EFAULT) \ : "cc") diff --git a/arch/arm/include/asm/ucontext.h b/arch/arm/include/asm/ucontext.h index bf65e9f4525d..47f023aa8495 100644 --- a/arch/arm/include/asm/ucontext.h +++ b/arch/arm/include/asm/ucontext.h @@ -59,23 +59,22 @@ struct iwmmxt_sigframe { #endif /* CONFIG_IWMMXT */ #ifdef CONFIG_VFP -#if __LINUX_ARM_ARCH__ < 6 -/* For ARM pre-v6, we use fstmiax and fldmiax. This adds one extra - * word after the registers, and a word of padding at the end for - * alignment. */ #define VFP_MAGIC 0x56465001 -#define VFP_STORAGE_SIZE 152 -#else -#define VFP_MAGIC 0x56465002 -#define VFP_STORAGE_SIZE 144 -#endif struct vfp_sigframe { unsigned long magic; unsigned long size; - union vfp_state storage; -}; + struct user_vfp ufp; + struct user_vfp_exc ufp_exc; +} __attribute__((__aligned__(8))); + +/* + * 8 byte for magic and size, 264 byte for ufp, 12 bytes for ufp_exc, + * 4 bytes padding. + */ +#define VFP_STORAGE_SIZE sizeof(struct vfp_sigframe) + #endif /* CONFIG_VFP */ /* @@ -91,7 +90,7 @@ struct aux_sigframe { #ifdef CONFIG_IWMMXT struct iwmmxt_sigframe iwmmxt; #endif -#if 0 && defined CONFIG_VFP /* Not yet saved. */ +#ifdef CONFIG_VFP struct vfp_sigframe vfp; #endif /* Something that isn't a valid magic number for any coprocessor. */ diff --git a/arch/arm/include/asm/user.h b/arch/arm/include/asm/user.h index df95e050f9dd..05ac4b06876a 100644 --- a/arch/arm/include/asm/user.h +++ b/arch/arm/include/asm/user.h @@ -83,11 +83,21 @@ struct user{ /* * User specific VFP registers. If only VFPv2 is present, registers 16 to 31 - * are ignored by the ptrace system call. + * are ignored by the ptrace system call and the signal handler. */ struct user_vfp { unsigned long long fpregs[32]; unsigned long fpscr; }; +/* + * VFP exception registers exposed to user space during signal delivery. + * Fields not relavant to the current VFP architecture are ignored. + */ +struct user_vfp_exc { + unsigned long fpexc; + unsigned long fpinst; + unsigned long fpinst2; +}; + #endif /* _ARM_USER_H */ diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 6c5cf369183b..7ee48e7f8f31 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -523,16 +523,16 @@ ENDPROC(__und_usr) /* * The out of line fixup for the ldrt above. */ - .section .fixup, "ax" + .pushsection .fixup, "ax" 4: mov pc, r9 - .previous - .section __ex_table,"a" + .popsection + .pushsection __ex_table,"a" .long 1b, 4b #if __LINUX_ARM_ARCH__ >= 7 .long 2b, 4b .long 3b, 4b #endif - .previous + .popsection /* * Check whether the instruction is a co-processor instruction. @@ -676,10 +676,10 @@ do_fpe: * lr = unrecognised FP instruction return address */ - .data + .pushsection .data ENTRY(fp_enter) .word no_fp - .previous + .popsection ENTRY(no_fp) mov pc, lr diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c index c63842766229..0298286ad4ad 100644 --- a/arch/arm/kernel/ftrace.c +++ b/arch/arm/kernel/ftrace.c @@ -62,15 +62,15 @@ int ftrace_modify_code(unsigned long pc, unsigned char *old_code, " movne %0, #2 \n" "3:\n" - ".section .fixup, \"ax\"\n" + ".pushsection .fixup, \"ax\"\n" "4: mov %0, #1 \n" " b 3b \n" - ".previous\n" + ".popsection\n" - ".section __ex_table, \"a\"\n" + ".pushsection __ex_table, \"a\"\n" " .long 1b, 4b \n" " .long 2b, 4b \n" - ".previous\n" + ".popsection\n" : "=r"(err), "=r"(replaced) : "r"(pc), "r"(new), "r"(old), "0"(err), "1"(replaced) diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index b7cb45bb91e8..3b3d2c80509c 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -27,7 +27,6 @@ #include <linux/ioport.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/slab.h> #include <linux/random.h> #include <linux/smp.h> #include <linux/init.h> diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c index 60c62c377fa9..2ba7deb3072e 100644 --- a/arch/arm/kernel/kprobes.c +++ b/arch/arm/kernel/kprobes.c @@ -22,6 +22,7 @@ #include <linux/kernel.h> #include <linux/kprobes.h> #include <linux/module.h> +#include <linux/slab.h> #include <linux/stop_machine.h> #include <linux/stringify.h> #include <asm/traps.h> @@ -393,6 +394,14 @@ void __kprobes jprobe_return(void) /* * Setup an empty pt_regs. Fill SP and PC fields as * they're needed by longjmp_break_handler. + * + * We allocate some slack between the original SP and start of + * our fabricated regs. To be precise we want to have worst case + * covered which is STMFD with all 16 regs so we allocate 2 * + * sizeof(struct_pt_regs)). + * + * This is to prevent any simulated instruction from writing + * over the regs when they are accessing the stack. */ "sub sp, %0, %1 \n\t" "ldr r0, ="__stringify(JPROBE_MAGIC_ADDR)"\n\t" @@ -410,7 +419,7 @@ void __kprobes jprobe_return(void) "ldmia sp, {r0 - pc} \n\t" : : "r" (kcb->jprobe_saved_regs.ARM_sp), - "I" (sizeof(struct pt_regs)), + "I" (sizeof(struct pt_regs) * 2), "J" (offsetof(struct pt_regs, ARM_sp)), "J" (offsetof(struct pt_regs, ARM_pc)), "J" (offsetof(struct pt_regs, ARM_cpsr)) diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index f28c5e9c51ea..c628bdf6c430 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -16,9 +16,9 @@ #include <linux/mm.h> #include <linux/elf.h> #include <linux/vmalloc.h> -#include <linux/slab.h> #include <linux/fs.h> #include <linux/string.h> +#include <linux/gfp.h> #include <asm/pgtable.h> #include <asm/sections.h> diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index ba2adefa53f7..acf5e6fdb6dc 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -16,7 +16,6 @@ #include <linux/mm.h> #include <linux/stddef.h> #include <linux/unistd.h> -#include <linux/slab.h> #include <linux/user.h> #include <linux/delay.h> #include <linux/reboot.h> @@ -356,7 +355,7 @@ EXPORT_SYMBOL(dump_fpu); * the thread function, and r3 points to the exit function. */ extern void kernel_thread_helper(void); -asm( ".section .text\n" +asm( ".pushsection .text\n" " .align\n" " .type kernel_thread_helper, #function\n" "kernel_thread_helper:\n" @@ -364,11 +363,11 @@ asm( ".section .text\n" " mov lr, r3\n" " mov pc, r2\n" " .size kernel_thread_helper, . - kernel_thread_helper\n" -" .previous"); +" .popsection"); #ifdef CONFIG_ARM_UNWIND extern void kernel_thread_exit(long code); -asm( ".section .text\n" +asm( ".pushsection .text\n" " .align\n" " .type kernel_thread_exit, #function\n" "kernel_thread_exit:\n" @@ -378,7 +377,7 @@ asm( ".section .text\n" " nop\n" " .fnend\n" " .size kernel_thread_exit, . - kernel_thread_exit\n" -" .previous"); +" .popsection"); #else #define kernel_thread_exit do_exit #endif diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index e7714f367eb8..907d5a620bca 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -18,6 +18,7 @@ #include <asm/cacheflush.h> #include <asm/ucontext.h> #include <asm/unistd.h> +#include <asm/vfp.h> #include "ptrace.h" #include "signal.h" @@ -175,6 +176,90 @@ static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame) #endif +#ifdef CONFIG_VFP + +static int preserve_vfp_context(struct vfp_sigframe __user *frame) +{ + struct thread_info *thread = current_thread_info(); + struct vfp_hard_struct *h = &thread->vfpstate.hard; + const unsigned long magic = VFP_MAGIC; + const unsigned long size = VFP_STORAGE_SIZE; + int err = 0; + + vfp_sync_hwstate(thread); + __put_user_error(magic, &frame->magic, err); + __put_user_error(size, &frame->size, err); + + /* + * Copy the floating point registers. There can be unused + * registers see asm/hwcap.h for details. + */ + err |= __copy_to_user(&frame->ufp.fpregs, &h->fpregs, + sizeof(h->fpregs)); + /* + * Copy the status and control register. + */ + __put_user_error(h->fpscr, &frame->ufp.fpscr, err); + + /* + * Copy the exception registers. + */ + __put_user_error(h->fpexc, &frame->ufp_exc.fpexc, err); + __put_user_error(h->fpinst, &frame->ufp_exc.fpinst, err); + __put_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err); + + return err ? -EFAULT : 0; +} + +static int restore_vfp_context(struct vfp_sigframe __user *frame) +{ + struct thread_info *thread = current_thread_info(); + struct vfp_hard_struct *h = &thread->vfpstate.hard; + unsigned long magic; + unsigned long size; + unsigned long fpexc; + int err = 0; + + __get_user_error(magic, &frame->magic, err); + __get_user_error(size, &frame->size, err); + + if (err) + return -EFAULT; + if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE) + return -EINVAL; + + /* + * Copy the floating point registers. There can be unused + * registers see asm/hwcap.h for details. + */ + err |= __copy_from_user(&h->fpregs, &frame->ufp.fpregs, + sizeof(h->fpregs)); + /* + * Copy the status and control register. + */ + __get_user_error(h->fpscr, &frame->ufp.fpscr, err); + + /* + * Sanitise and restore the exception registers. + */ + __get_user_error(fpexc, &frame->ufp_exc.fpexc, err); + /* Ensure the VFP is enabled. */ + fpexc |= FPEXC_EN; + /* Ensure FPINST2 is invalid and the exception flag is cleared. */ + fpexc &= ~(FPEXC_EX | FPEXC_FP2V); + h->fpexc = fpexc; + + __get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err); + __get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err); + + if (!err) + vfp_flush_hwstate(thread); + + return err ? -EFAULT : 0; +} + +#endif + /* * Do a signal return; undo the signal stack. These are aligned to 64-bit. */ @@ -233,8 +318,8 @@ static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf) err |= restore_iwmmxt_context(&aux->iwmmxt); #endif #ifdef CONFIG_VFP -// if (err == 0) -// err |= vfp_restore_state(&sf->aux.vfp); + if (err == 0) + err |= restore_vfp_context(&aux->vfp); #endif return err; @@ -348,8 +433,8 @@ setup_sigframe(struct sigframe __user *sf, struct pt_regs *regs, sigset_t *set) err |= preserve_iwmmxt_context(&aux->iwmmxt); #endif #ifdef CONFIG_VFP -// if (err == 0) -// err |= vfp_save_state(&sf->aux.vfp); + if (err == 0) + err |= preserve_vfp_context(&aux->vfp); #endif __put_user_error(0, &aux->end_magic, err); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 577543f3857f..a01194e583ff 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -86,6 +86,12 @@ int __cpuinit __cpu_up(unsigned int cpu) return PTR_ERR(idle); } ci->idle = idle; + } else { + /* + * Since this idle thread is being re-used, call + * init_idle() to reinitialize the thread structure. + */ + init_idle(idle, cpu); } /* diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index ea02a7b1c244..7c5f0c024db7 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -21,23 +21,6 @@ #include <asm/smp_twd.h> #include <asm/hardware/gic.h> -#define TWD_TIMER_LOAD 0x00 -#define TWD_TIMER_COUNTER 0x04 -#define TWD_TIMER_CONTROL 0x08 -#define TWD_TIMER_INTSTAT 0x0C - -#define TWD_WDOG_LOAD 0x20 -#define TWD_WDOG_COUNTER 0x24 -#define TWD_WDOG_CONTROL 0x28 -#define TWD_WDOG_INTSTAT 0x2C -#define TWD_WDOG_RESETSTAT 0x30 -#define TWD_WDOG_DISABLE 0x34 - -#define TWD_TIMER_CONTROL_ENABLE (1 << 0) -#define TWD_TIMER_CONTROL_ONESHOT (0 << 1) -#define TWD_TIMER_CONTROL_PERIODIC (1 << 1) -#define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2) - /* set up by the platform code */ void __iomem *twd_base; diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c index 4350f75e578c..c23501842b98 100644 --- a/arch/arm/kernel/sys_arm.c +++ b/arch/arm/kernel/sys_arm.c @@ -15,7 +15,6 @@ #include <linux/module.h> #include <linux/errno.h> #include <linux/sched.h> -#include <linux/slab.h> #include <linux/mm.h> #include <linux/sem.h> #include <linux/msg.h> @@ -27,6 +26,7 @@ #include <linux/file.h> #include <linux/ipc.h> #include <linux/uaccess.h> +#include <linux/slab.h> /* Fork a new task - this creates a new program thread. * This is called indirectly via a small wrapper diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S index aaf7220d9e30..a673297b0cf1 100644 --- a/arch/arm/lib/backtrace.S +++ b/arch/arm/lib/backtrace.S @@ -110,13 +110,13 @@ no_frame: ldmfd sp!, {r4 - r8, pc} ENDPROC(__backtrace) ENDPROC(c_backtrace) - .section __ex_table,"a" + .pushsection __ex_table,"a" .align 3 .long 1001b, 1006b .long 1002b, 1006b .long 1003b, 1006b .long 1004b, 1006b - .previous + .popsection #define instr r4 #define reg r5 diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S index 1279abd8b886..14a0d988c82c 100644 --- a/arch/arm/lib/clear_user.S +++ b/arch/arm/lib/clear_user.S @@ -45,9 +45,10 @@ USER( strnebt r2, [r0]) mov r0, #0 ldmfd sp!, {r1, pc} ENDPROC(__clear_user) +ENDPROC(__clear_user_std) - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 0 9001: ldmfd sp!, {r0, pc} - .previous + .popsection diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S index e4fe124acedc..66a477a3e3cc 100644 --- a/arch/arm/lib/copy_from_user.S +++ b/arch/arm/lib/copy_from_user.S @@ -90,7 +90,7 @@ ENTRY(__copy_from_user) ENDPROC(__copy_from_user) - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 0 copy_abort_preamble ldmfd sp!, {r1, r2} @@ -100,5 +100,5 @@ ENDPROC(__copy_from_user) bl __memzero ldr r0, [sp], #4 copy_abort_end - .previous + .popsection diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S index 1a71e1584442..d066df686e17 100644 --- a/arch/arm/lib/copy_to_user.S +++ b/arch/arm/lib/copy_to_user.S @@ -93,13 +93,14 @@ WEAK(__copy_to_user) #include "copy_template.S" ENDPROC(__copy_to_user) +ENDPROC(__copy_to_user_std) - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 0 copy_abort_preamble ldmfd sp!, {r1, r2, r3} sub r0, r0, r1 rsb r0, r0, r2 copy_abort_end - .previous + .popsection diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S index fd0e9dcd9fdc..59ff6fdc1e63 100644 --- a/arch/arm/lib/csumpartialcopyuser.S +++ b/arch/arm/lib/csumpartialcopyuser.S @@ -68,7 +68,7 @@ * so properly, we would have to add in whatever registers were loaded before * the fault, which, with the current asm above is not predictable. */ - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 4 9001: mov r4, #-EFAULT ldr r5, [fp, #4] @ *err_ptr @@ -80,4 +80,4 @@ strneb r0, [r1], #1 bne 9002b load_regs - .previous + .popsection diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index a1814d927122..b1631a7dbe75 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -64,9 +64,9 @@ __get_user_bad: mov pc, lr ENDPROC(__get_user_bad) -.section __ex_table, "a" +.pushsection __ex_table, "a" .long 1b, __get_user_bad .long 2b, __get_user_bad .long 3b, __get_user_bad .long 4b, __get_user_bad -.previous +.popsection diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S index 5025c863713d..938fc14f962d 100644 --- a/arch/arm/lib/memmove.S +++ b/arch/arm/lib/memmove.S @@ -74,7 +74,7 @@ ENTRY(memmove) rsb ip, ip, #32 addne pc, pc, ip @ C is always clear here b 7f -6: nop +6: W(nop) W(ldr) r3, [r1, #-4]! W(ldr) r4, [r1, #-4]! W(ldr) r5, [r1, #-4]! @@ -85,7 +85,7 @@ ENTRY(memmove) add pc, pc, ip nop - nop + W(nop) W(str) r3, [r0, #-4]! W(str) r4, [r0, #-4]! W(str) r5, [r0, #-4]! diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index 02fedbf07c0d..5a01a23c6c06 100644 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -81,11 +81,11 @@ __put_user_bad: mov pc, lr ENDPROC(__put_user_bad) -.section __ex_table, "a" +.pushsection __ex_table, "a" .long 1b, __put_user_bad .long 2b, __put_user_bad .long 3b, __put_user_bad .long 4b, __put_user_bad .long 5b, __put_user_bad .long 6b, __put_user_bad -.previous +.popsection diff --git a/arch/arm/lib/strncpy_from_user.S b/arch/arm/lib/strncpy_from_user.S index 1c9814f346c6..f202d7bd1647 100644 --- a/arch/arm/lib/strncpy_from_user.S +++ b/arch/arm/lib/strncpy_from_user.S @@ -33,11 +33,11 @@ ENTRY(__strncpy_from_user) mov pc, lr ENDPROC(__strncpy_from_user) - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 0 9001: mov r3, #0 strb r3, [r0, #0] @ null terminate mov r0, #-EFAULT mov pc, lr - .previous + .popsection diff --git a/arch/arm/lib/strnlen_user.S b/arch/arm/lib/strnlen_user.S index 7855b2906659..0ecbb459c4f1 100644 --- a/arch/arm/lib/strnlen_user.S +++ b/arch/arm/lib/strnlen_user.S @@ -33,8 +33,8 @@ ENTRY(__strnlen_user) mov pc, lr ENDPROC(__strnlen_user) - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 0 9001: mov r0, #0 mov pc, lr - .previous + .popsection diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S index ffdd27498cee..fee9f6f88adb 100644 --- a/arch/arm/lib/uaccess.S +++ b/arch/arm/lib/uaccess.S @@ -279,10 +279,10 @@ USER( strgtbt r3, [r0], #1) @ May fault b .Lc2u_finished ENDPROC(__copy_to_user) - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 0 9001: ldmfd sp!, {r0, r4 - r7, pc} - .previous + .popsection /* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n); * Purpose : copy a block from user memory to kernel memory @@ -545,7 +545,7 @@ USER( ldrgtbt r3, [r1], #1) @ May fault b .Lcfu_finished ENDPROC(__copy_from_user) - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 0 /* * We took an exception. r0 contains a pointer to @@ -559,5 +559,5 @@ ENDPROC(__copy_from_user) blne __memzero mov r0, r4 ldmfd sp!, {r4 - r7, pc} - .previous + .popsection diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c index 6b967ffb6552..e2d2f2cd0c4f 100644 --- a/arch/arm/lib/uaccess_with_memcpy.c +++ b/arch/arm/lib/uaccess_with_memcpy.c @@ -16,6 +16,7 @@ #include <linux/mm.h> #include <linux/sched.h> #include <linux/hardirq.h> /* for in_atomic() */ +#include <linux/gfp.h> #include <asm/current.h> #include <asm/page.h> diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c index b5c5fc6ba3a9..3ef68330452a 100644 --- a/arch/arm/mach-aaec2000/core.c +++ b/arch/arm/mach-aaec2000/core.c @@ -20,6 +20,7 @@ #include <linux/timex.h> #include <linux/signal.h> #include <linux/clk.h> +#include <linux/gfp.h> #include <mach/hardware.h> #include <asm/irq.h> diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 027dd570dcc3..d4004557532a 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -16,8 +16,8 @@ obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_d obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o -obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o - obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT572D940HF) += at572d940hf.o at91sam926x_time.o at572d940hf_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S index 987fab3d846a..9c5b48e68a71 100644 --- a/arch/arm/mach-at91/pm_slowclock.S +++ b/arch/arm/mach-at91/pm_slowclock.S @@ -175,8 +175,6 @@ ENTRY(at91_slow_clock) orr r3, r3, #(1 << 29) /* bit 29 always set */ str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)] - wait_pllalock - /* Save PLLB setting and disable it */ ldr r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)] str r3, .saved_pllbr @@ -184,8 +182,6 @@ ENTRY(at91_slow_clock) mov r3, #AT91_PMC_PLLCOUNT str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)] - wait_pllblock - /* Turn off the main oscillator */ ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)] bic r3, r3, #AT91_PMC_MOSCEN @@ -205,13 +201,25 @@ ENTRY(at91_slow_clock) ldr r3, .saved_pllbr str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)] + tst r3, #(AT91_PMC_MUL & 0xff0000) + bne 1f + tst r3, #(AT91_PMC_MUL & ~0xff0000) + beq 2f +1: wait_pllblock +2: /* Restore PLLA setting */ ldr r3, .saved_pllar str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)] + tst r3, #(AT91_PMC_MUL & 0xff0000) + bne 3f + tst r3, #(AT91_PMC_MUL & ~0xff0000) + beq 4f +3: wait_pllalock +4: #ifdef SLOWDOWN_MASTER_CLOCK /* diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c index 7b20fccb9d4e..29c0a911df26 100644 --- a/arch/arm/mach-bcmring/dma.c +++ b/arch/arm/mach-bcmring/dma.c @@ -28,6 +28,7 @@ #include <linux/interrupt.h> #include <linux/irqreturn.h> #include <linux/proc_fs.h> +#include <linux/slab.h> #include <mach/timer.h> @@ -2220,11 +2221,15 @@ EXPORT_SYMBOL(dma_map_create_descriptor_ring); int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */ int dirtied /* non-zero if any of the pages were modified */ ) { + + int rc = 0; int regionIdx; int segmentIdx; DMA_Region_t *region; DMA_Segment_t *segment; + down(&memMap->lock); + for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) { region = &memMap->region[regionIdx]; @@ -2238,7 +2243,8 @@ int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */ printk(KERN_ERR "%s: vmalloc'd pages are not yet supported\n", __func__); - return -EINVAL; + rc = -EINVAL; + goto out; } case DMA_MEM_TYPE_KMALLOC: @@ -2275,7 +2281,8 @@ int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */ printk(KERN_ERR "%s: Unsupported memory type: %d\n", __func__, region->memType); - return -EINVAL; + rc = -EINVAL; + goto out; } } @@ -2313,9 +2320,10 @@ int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */ memMap->numRegionsUsed = 0; memMap->inUse = 0; +out: up(&memMap->lock); - return 0; + return rc; } EXPORT_SYMBOL(dma_unmap); diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index d15beceb632e..df4ab2105869 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -22,6 +22,7 @@ #include <linux/leds.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/slab.h> #include <linux/mtd/nand.h> #include <linux/input.h> #include <linux/spi/spi.h> diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index 122e61a9f505..e8cb982f5e8e 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -410,7 +410,7 @@ static struct clk_lookup da830_clks[] = { CLK("davinci-mcasp.0", NULL, &mcasp0_clk), CLK("davinci-mcasp.1", NULL, &mcasp1_clk), CLK("davinci-mcasp.2", NULL, &mcasp2_clk), - CLK("musb_hdrc", NULL, &usb20_clk), + CLK(NULL, "usb20", &usb20_clk), CLK(NULL, "aemif", &aemif_clk), CLK(NULL, "aintc", &aintc_clk), CLK(NULL, "secu_mgr", &secu_mgr_clk), diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 27772e18e45b..0d6ee583f65c 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -758,7 +758,6 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = { [IRQ_MMCINT] = 7, [IRQ_DM365_MMCINT1] = 7, [IRQ_DM365_PWMINT3] = 7, - [IRQ_DDRINT] = 4, [IRQ_AEMIFINT] = 2, [IRQ_DM365_SDIOINT1] = 2, [IRQ_TINT0_TINT12] = 7, diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c index 15dd886df04c..53137387aee1 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/mach-davinci/dma.c @@ -23,6 +23,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/slab.h> #include <mach/edma.h> @@ -1266,7 +1267,8 @@ int edma_start(unsigned channel) /* EDMA channel with event association */ pr_debug("EDMA: ER%d %08x\n", j, edma_shadow0_read_array(ctlr, SH_ER, j)); - /* Clear any pending error */ + /* Clear any pending event or error */ + edma_write_array(ctlr, EDMA_ECR, j, mask); edma_write_array(ctlr, EDMA_EMCR, j, mask); /* Clear any SER */ edma_shadow0_write_array(ctlr, SH_SECR, j, mask); diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index cc9be7fee627..03acfd39042b 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -3,7 +3,7 @@ * * Author: Mark A. Greer <mgreer@mvista.com> * - * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under + * 2007, 2009-2010 (c) MontaVista Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. @@ -13,7 +13,9 @@ #include <video/da8xx-fb.h> +#include <linux/platform_device.h> #include <linux/davinci_emac.h> + #include <mach/serial.h> #include <mach/edma.h> #include <mach/i2c.h> @@ -144,6 +146,10 @@ extern const short da850_mmcsd0_pins[]; extern const short da850_nand_pins[]; extern const short da850_nor_pins[]; +#ifdef CONFIG_DAVINCI_MUX int da8xx_pinmux_setup(const short pins[]); +#else +static inline int da8xx_pinmux_setup(const short pins[]) { return 0; } +#endif #endif /* __ASM_ARCH_DAVINCI_DA8XX_H */ diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 42d985beece5..9e0b106b4f5f 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -253,8 +253,6 @@ static void __init timer_init(void) irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq; setup_irq(irq, &t->irqaction); } - - timer32_config(&timers[i]); } } @@ -331,6 +329,7 @@ static void __init davinci_timer_init(void) unsigned int clocksource_id; static char err[] __initdata = KERN_ERR "%s: can't register clocksource!\n"; + int i; clockevent_id = soc_info->timer_info->clockevent_id; clocksource_id = soc_info->timer_info->clocksource_id; @@ -389,6 +388,9 @@ static void __init davinci_timer_init(void) clockevent_davinci.cpumask = cpumask_of(0); clockevents_register_device(&clockevent_davinci); + + for (i=0; i< ARRAY_SIZE(timers); i++) + timer32_config(&timers[i]); } struct sys_timer davinci_timer = { diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c index cc377ae8c428..cf547ad7ebd4 100644 --- a/arch/arm/mach-ep93xx/gpio.c +++ b/arch/arm/mach-ep93xx/gpio.c @@ -25,7 +25,7 @@ #include <mach/hardware.h> /************************************************************************* - * GPIO handling for EP93xx + * Interrupt handling for EP93xx on-chip GPIOs *************************************************************************/ static unsigned char gpio_int_unmasked[3]; static unsigned char gpio_int_enabled[3]; @@ -40,7 +40,7 @@ static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 }; static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 }; static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 }; -void ep93xx_gpio_update_int_params(unsigned port) +static void ep93xx_gpio_update_int_params(unsigned port) { BUG_ON(port > 2); @@ -56,7 +56,7 @@ void ep93xx_gpio_update_int_params(unsigned port) EP93XX_GPIO_REG(int_en_register_offset[port])); } -void ep93xx_gpio_int_mask(unsigned line) +static inline void ep93xx_gpio_int_mask(unsigned line) { gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7)); } diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c index 7a2614828217..bdb3f6706801 100644 --- a/arch/arm/mach-h720x/common.c +++ b/arch/arm/mach-h720x/common.c @@ -14,7 +14,6 @@ */ #include <linux/sched.h> -#include <linux/slab.h> #include <linux/mman.h> #include <linux/init.h> #include <linux/interrupt.h> diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c index 44d4c2e8207b..f77f20255045 100644 --- a/arch/arm/mach-integrator/cpu.c +++ b/arch/arm/mach-integrator/cpu.c @@ -13,7 +13,6 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/cpufreq.h> -#include <linux/slab.h> #include <linux/sched.h> #include <linux/smp.h> #include <linux/init.h> diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 0058c937719e..41b10725cef7 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -21,6 +21,7 @@ #include <linux/amba/bus.h> #include <linux/amba/clcd.h> #include <linux/io.h> +#include <linux/slab.h> #include <asm/clkdev.h> #include <mach/clkdev.h> diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 66ef86d6d9e3..15e6cc5a352f 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -13,7 +13,6 @@ #include <linux/list.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <linux/slab.h> #include <linux/string.h> #include <linux/sysdev.h> #include <linux/amba/bus.h> @@ -21,6 +20,7 @@ #include <linux/amba/clcd.h> #include <linux/amba/mmci.h> #include <linux/io.h> +#include <linux/gfp.h> #include <asm/clkdev.h> #include <mach/clkdev.h> diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index 148d25fc636f..ffbd349363af 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -22,7 +22,6 @@ */ #include <linux/kernel.h> #include <linux/pci.h> -#include <linux/slab.h> #include <linux/ioport.h> #include <linux/interrupt.h> #include <linux/spinlock.h> diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index 4873f26a42e1..6d5a90813d31 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -18,6 +18,7 @@ */ #include <linux/pci.h> +#include <linux/slab.h> #include <linux/delay.h> #include <linux/jiffies.h> #include <asm/irq.h> diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c index 93370a46b620..10384fc37cb2 100644 --- a/arch/arm/mach-iop32x/glantank.c +++ b/arch/arm/mach-iop32x/glantank.c @@ -19,7 +19,6 @@ #include <linux/pci.h> #include <linux/pm.h> #include <linux/string.h> -#include <linux/slab.h> #include <linux/serial_core.h> #include <linux/serial_8250.h> #include <linux/mtd/physmap.h> diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c index a7a08dda7f33..d6ac85ff109d 100644 --- a/arch/arm/mach-iop32x/iq31244.c +++ b/arch/arm/mach-iop32x/iq31244.c @@ -21,7 +21,6 @@ #include <linux/pci.h> #include <linux/pm.h> #include <linux/string.h> -#include <linux/slab.h> #include <linux/serial_core.h> #include <linux/serial_8250.h> #include <linux/mtd/physmap.h> diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c index 0200f80c1e17..c6a0e4ee9d91 100644 --- a/arch/arm/mach-iop32x/iq80321.c +++ b/arch/arm/mach-iop32x/iq80321.c @@ -18,7 +18,6 @@ #include <linux/kernel.h> #include <linux/pci.h> #include <linux/string.h> -#include <linux/slab.h> #include <linux/serial_core.h> #include <linux/serial_8250.h> #include <linux/mtd/physmap.h> diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c index 2a5c637639bb..5d99039286eb 100644 --- a/arch/arm/mach-iop32x/n2100.c +++ b/arch/arm/mach-iop32x/n2100.c @@ -23,7 +23,6 @@ #include <linux/pci.h> #include <linux/pm.h> #include <linux/string.h> -#include <linux/slab.h> #include <linux/serial_core.h> #include <linux/serial_8250.h> #include <linux/mtd/physmap.h> diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c index 394e95a30b75..c6ff5523b380 100644 --- a/arch/arm/mach-iop33x/iq80331.c +++ b/arch/arm/mach-iop33x/iq80331.c @@ -17,7 +17,6 @@ #include <linux/kernel.h> #include <linux/pci.h> #include <linux/string.h> -#include <linux/slab.h> #include <linux/serial_core.h> #include <linux/serial_8250.h> #include <linux/mtd/physmap.h> diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c index a40badf126c2..fbf551409394 100644 --- a/arch/arm/mach-iop33x/iq80332.c +++ b/arch/arm/mach-iop33x/iq80332.c @@ -17,7 +17,6 @@ #include <linux/kernel.h> #include <linux/pci.h> #include <linux/string.h> -#include <linux/slab.h> #include <linux/serial_core.h> #include <linux/serial_8250.h> #include <linux/mtd/physmap.h> diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index c84dfac13882..1a557e0d055b 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -26,7 +26,6 @@ #include <linux/bitops.h> #include <linux/pci.h> #include <linux/ioport.h> -#include <linux/slab.h> #include <linux/delay.h> #include <linux/serial.h> #include <linux/tty.h> diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c index 4467c4224d73..55e5c69352ad 100644 --- a/arch/arm/mach-ixp2000/ixdp2400.c +++ b/arch/arm/mach-ixp2000/ixdp2400.c @@ -23,7 +23,6 @@ #include <linux/bitops.h> #include <linux/pci.h> #include <linux/ioport.h> -#include <linux/slab.h> #include <linux/delay.h> #include <linux/io.h> diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c index 94f68ba9ea50..237b61a85e9a 100644 --- a/arch/arm/mach-ixp2000/ixdp2800.c +++ b/arch/arm/mach-ixp2000/ixdp2800.c @@ -23,7 +23,6 @@ #include <linux/bitops.h> #include <linux/pci.h> #include <linux/ioport.h> -#include <linux/slab.h> #include <linux/delay.h> #include <linux/io.h> diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c index 30451300751b..91fffb9b2084 100644 --- a/arch/arm/mach-ixp2000/ixdp2x00.c +++ b/arch/arm/mach-ixp2000/ixdp2x00.c @@ -23,7 +23,6 @@ #include <linux/bitops.h> #include <linux/pci.h> #include <linux/ioport.h> -#include <linux/slab.h> #include <linux/delay.h> #include <linux/io.h> diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index 4a12327a09a3..0369ec4242a6 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -23,7 +23,6 @@ #include <linux/bitops.h> #include <linux/pci.h> #include <linux/ioport.h> -#include <linux/slab.h> #include <linux/delay.h> #include <linux/serial.h> #include <linux/tty.h> diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c index 60e9fd08ab80..90771cad06f8 100644 --- a/arch/arm/mach-ixp2000/pci.c +++ b/arch/arm/mach-ixp2000/pci.c @@ -22,7 +22,6 @@ #include <linux/mm.h> #include <linux/init.h> #include <linux/ioport.h> -#include <linux/slab.h> #include <linux/delay.h> #include <linux/io.h> diff --git a/arch/arm/mach-ixp23xx/include/mach/memory.h b/arch/arm/mach-ixp23xx/include/mach/memory.h index 94a3a86cfeb8..6ef65d813f16 100644 --- a/arch/arm/mach-ixp23xx/include/mach/memory.h +++ b/arch/arm/mach-ixp23xx/include/mach/memory.h @@ -19,7 +19,7 @@ */ #define PHYS_OFFSET (0x00000000) -#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)) +#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0) #define __phys_to_bus(x) ((x) + (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET)) #define __bus_to_phys(x) ((x) - (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET)) diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c index 59022becb134..4b0e598a91c9 100644 --- a/arch/arm/mach-ixp23xx/pci.c +++ b/arch/arm/mach-ixp23xx/pci.c @@ -23,7 +23,6 @@ #include <linux/mm.h> #include <linux/init.h> #include <linux/ioport.h> -#include <linux/slab.h> #include <linux/delay.h> #include <linux/io.h> diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c index 6e558a76457d..d8bc86d76f1d 100644 --- a/arch/arm/mach-ixp4xx/avila-setup.c +++ b/arch/arm/mach-ixp4xx/avila-setup.c @@ -17,7 +17,6 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/serial_8250.h> -#include <linux/slab.h> #include <linux/i2c-gpio.h> #include <asm/types.h> #include <asm/setup.h> diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c index 25bf5ad770ea..31a47f6a8939 100644 --- a/arch/arm/mach-ixp4xx/coyote-setup.c +++ b/arch/arm/mach-ixp4xx/coyote-setup.c @@ -14,7 +14,6 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/serial_8250.h> -#include <linux/slab.h> #include <asm/types.h> #include <asm/setup.h> diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c index 59b73a0ddfa9..2583b2a13174 100644 --- a/arch/arm/mach-ixp4xx/gateway7001-setup.c +++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c @@ -17,7 +17,6 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/serial_8250.h> -#include <linux/slab.h> #include <asm/types.h> #include <asm/setup.h> diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c index 0bc7185cb6f7..c67586b79400 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c @@ -27,7 +27,6 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/serial_8250.h> -#include <linux/slab.h> #include <asm/types.h> #include <asm/setup.h> #include <asm/memory.h> diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index bbb768988845..827cbc4402f4 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -14,7 +14,6 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/serial_8250.h> -#include <linux/slab.h> #include <linux/i2c-gpio.h> #include <linux/io.h> #include <linux/mtd/mtd.h> diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c index e8bb25778166..a17ed79207a4 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c @@ -20,7 +20,6 @@ #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/slab.h> #include <mach/npe.h> #define DEBUG_MSG 0 diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c index 7ea782021d1f..4dd74863daa9 100644 --- a/arch/arm/mach-ixp4xx/wg302v2-setup.c +++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c @@ -18,7 +18,6 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/serial_8250.h> -#include <linux/slab.h> #include <asm/types.h> #include <asm/setup.h> diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c index 0358f45766cb..5e6f711b1c67 100644 --- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c +++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c @@ -74,9 +74,9 @@ static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = { .desc = "SWR Button", .active_low = 1, }, { - .code = KEY_F1, + .code = KEY_WPS_BUTTON, .gpio = 46, - .desc = "WPS Button(F1)", + .desc = "WPS Button", .active_low = 1, }, }; diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index a604b2a701aa..dee1eff50d39 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/pci.h> +#include <linux/slab.h> #include <linux/mbus.h> #include <asm/irq.h> #include <asm/mach/pci.h> diff --git a/arch/arm/mach-lh7a40x/clcd.c b/arch/arm/mach-lh7a40x/clcd.c index c472b9e8b37c..7fe4fd347c82 100644 --- a/arch/arm/mach-lh7a40x/clcd.c +++ b/arch/arm/mach-lh7a40x/clcd.c @@ -10,6 +10,7 @@ */ #include <linux/init.h> +#include <linux/gfp.h> #include <linux/device.h> #include <linux/dma-mapping.h> #include <linux/sysdev.h> diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h index a7dcc5307216..85bd8a2d84b5 100644 --- a/arch/arm/mach-mmp/include/mach/uncompress.h +++ b/arch/arm/mach-mmp/include/mach/uncompress.h @@ -14,7 +14,7 @@ #define UART2_BASE (APB_PHYS_BASE + 0x17000) #define UART3_BASE (APB_PHYS_BASE + 0x18000) -static volatile unsigned long *UART = (unsigned long *)UART2_BASE; +static volatile unsigned long *UART; static inline void putc(char c) { @@ -37,6 +37,9 @@ static inline void flush(void) static inline void arch_decomp_setup(void) { + /* default to UART2 */ + UART = (unsigned long *)UART2_BASE; + if (machine_is_avengers_lite()) UART = (unsigned long *)UART3_BASE; } diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 3872af1cf2c3..170f68e46dd5 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -62,6 +62,15 @@ config MACH_MX31_3DS Include support for MX31PDK (3DS) platform. This includes specific configurations for the board and its peripherals. +config MACH_MX31_3DS_MXC_NAND_USE_BBT + bool "Make the MXC NAND driver use the in flash Bad Block Table" + depends on MACH_MX31_3DS + depends on MTD_NAND_MXC + help + Enable this if you want that the MXC NAND driver uses the in flash + Bad Block Table to know what blocks are bad instead of scanning the + entire flash looking for bad block markers. + config MACH_MX31MOBOARD bool "Support mx31moboard platforms (EPFL Mobots group)" select ARCH_MX31 @@ -95,6 +104,7 @@ config MACH_PCM043 config MACH_ARMADILLO5X0 bool "Support Atmark Armadillo-500 Development Base Board" select ARCH_MX31 + select MXC_ULPI if USB_ULPI help Include support for Atmark Armadillo-500 platform. This includes specific configurations for the board and its peripherals. diff --git a/arch/arm/mach-mx3/clock-imx31.c b/arch/arm/mach-mx3/clock-imx31.c index 80dba9966b5e..9a9eb6de6127 100644 --- a/arch/arm/mach-mx3/clock-imx31.c +++ b/arch/arm/mach-mx3/clock-imx31.c @@ -468,6 +468,7 @@ static struct clk ahb_clk = { } DEFINE_CLOCK(perclk_clk, 0, NULL, 0, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL); DEFINE_CLOCK(sdhc1_clk, 0, MXC_CCM_CGR0, 0, NULL, NULL, &perclk_clk); DEFINE_CLOCK(sdhc2_clk, 1, MXC_CCM_CGR0, 2, NULL, NULL, &perclk_clk); @@ -490,7 +491,7 @@ DEFINE_CLOCK(mpeg4_clk, 0, MXC_CCM_CGR1, 0, NULL, NULL, &ahb_clk); DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1, 2, mstick1_get_rate, NULL, &usb_pll_clk); DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1, 4, mstick2_get_rate, NULL, &usb_pll_clk); DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &serial_pll_clk); -DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ckil_clk); DEFINE_CLOCK(wdog_clk, 0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk); DEFINE_CLOCK(pwm_clk, 0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk); DEFINE_CLOCK(usb_clk2, 0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk); @@ -514,7 +515,6 @@ DEFINE_CLOCK(usb_clk1, 0, NULL, 0, usb_get_rate, NULL, &usb_pll_clk) DEFINE_CLOCK(nfc_clk, 0, NULL, 0, nfc_get_rate, NULL, &ahb_clk); DEFINE_CLOCK(scc_clk, 0, NULL, 0, NULL, NULL, &ipg_clk); DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk); -DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL); #define _REGISTER_CLOCK(d, n, c) \ { \ @@ -572,7 +572,6 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "iim", iim_clk) _REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk) _REGISTER_CLOCK(NULL, "mbx", mbx_clk) - _REGISTER_CLOCK("mxc_rtc", NULL, ckil_clk) }; int __init mx31_clocks_init(unsigned long fref) diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index 6adb586515ea..f8911154a9fa 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -575,11 +575,26 @@ struct platform_device imx_ssi_device1 = { .resource = imx_ssi_resources1, }; -static int mx3_devices_init(void) +static struct resource imx_wdt_resources[] = { + { + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device imx_wdt_device0 = { + .name = "imx-wdt", + .id = 0, + .num_resources = ARRAY_SIZE(imx_wdt_resources), + .resource = imx_wdt_resources, +}; + +static int __init mx3_devices_init(void) { if (cpu_is_mx31()) { mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR; mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff; + imx_wdt_resources[0].start = MX31_WDOG_BASE_ADDR; + imx_wdt_resources[0].end = MX31_WDOG_BASE_ADDR + 0x3fff; mxc_register_device(&mxc_rnga_device, NULL); } if (cpu_is_mx35()) { @@ -597,6 +612,8 @@ static int mx3_devices_init(void) imx_ssi_resources0[1].end = MX35_INT_SSI1; imx_ssi_resources1[1].start = MX35_INT_SSI2; imx_ssi_resources1[1].end = MX35_INT_SSI2; + imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR; + imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff; } return 0; diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h index 42cf175eac6b..4f77eb501274 100644 --- a/arch/arm/mach-mx3/devices.h +++ b/arch/arm/mach-mx3/devices.h @@ -25,4 +25,5 @@ extern struct platform_device mxc_spi_device1; extern struct platform_device mxc_spi_device2; extern struct platform_device imx_ssi_device0; extern struct platform_device imx_ssi_device1; - +extern struct platform_device imx_ssi_device1; +extern struct platform_device imx_wdt_device0; diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c index 3d72b0b89705..5f72ec91af2d 100644 --- a/arch/arm/mach-mx3/mach-armadillo5x0.c +++ b/arch/arm/mach-mx3/mach-armadillo5x0.c @@ -36,6 +36,9 @@ #include <linux/input.h> #include <linux/gpio_keys.h> #include <linux/i2c.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <linux/delay.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -52,6 +55,8 @@ #include <mach/ipu.h> #include <mach/mx3fb.h> #include <mach/mxc_nand.h> +#include <mach/mxc_ehci.h> +#include <mach/ulpi.h> #include "devices.h" #include "crm_regs.h" @@ -103,8 +108,158 @@ static int armadillo5x0_pins[] = { /* I2C2 */ MX31_PIN_CSPI2_MOSI__SCL, MX31_PIN_CSPI2_MISO__SDA, + /* OTG */ + MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, + MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, + MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, + MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, + MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, + MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, + MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, + MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, + MX31_PIN_USBOTG_CLK__USBOTG_CLK, + MX31_PIN_USBOTG_DIR__USBOTG_DIR, + MX31_PIN_USBOTG_NXT__USBOTG_NXT, + MX31_PIN_USBOTG_STP__USBOTG_STP, + /* USB host 2 */ + IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC), }; +/* USB */ +#if defined(CONFIG_USB_ULPI) + +#define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4) +#define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6) +#define USBH2_CS IOMUX_TO_GPIO(MX31_PIN_GPIO1_3) + +#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ + PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + +static int usbotg_init(struct platform_device *pdev) +{ + int err; + + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG); + + /* Chip already enabled by hardware */ + /* OTG phy reset*/ + err = gpio_request(OTG_RESET, "USB-OTG-RESET"); + if (err) { + pr_err("Failed to request the usb otg reset gpio\n"); + return err; + } + + err = gpio_direction_output(OTG_RESET, 1/*HIGH*/); + if (err) { + pr_err("Failed to reset the usb otg phy\n"); + goto otg_free_reset; + } + + gpio_set_value(OTG_RESET, 0/*LOW*/); + mdelay(5); + gpio_set_value(OTG_RESET, 1/*HIGH*/); + + return 0; + +otg_free_reset: + gpio_free(OTG_RESET); + return err; +} + +static int usbh2_init(struct platform_device *pdev) +{ + int err; + + mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG); + + mxc_iomux_set_gpr(MUX_PGP_UH2, true); + + + /* Enable the chip */ + err = gpio_request(USBH2_CS, "USB-H2-CS"); + if (err) { + pr_err("Failed to request the usb host 2 CS gpio\n"); + return err; + } + + err = gpio_direction_output(USBH2_CS, 0/*Enabled*/); + if (err) { + pr_err("Failed to drive the usb host 2 CS gpio\n"); + goto h2_free_cs; + } + + /* H2 phy reset*/ + err = gpio_request(USBH2_RESET, "USB-H2-RESET"); + if (err) { + pr_err("Failed to request the usb host 2 reset gpio\n"); + goto h2_free_cs; + } + + err = gpio_direction_output(USBH2_RESET, 1/*HIGH*/); + if (err) { + pr_err("Failed to reset the usb host 2 phy\n"); + goto h2_free_reset; + } + + gpio_set_value(USBH2_RESET, 0/*LOW*/); + mdelay(5); + gpio_set_value(USBH2_RESET, 1/*HIGH*/); + + return 0; + +h2_free_reset: + gpio_free(USBH2_RESET); +h2_free_cs: + gpio_free(USBH2_CS); + return err; +} + +static struct mxc_usbh_platform_data usbotg_pdata = { + .init = usbotg_init, + .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, + .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI, +}; + +static struct mxc_usbh_platform_data usbh2_pdata = { + .init = usbh2_init, + .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, + .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI, +}; +#endif /* CONFIG_USB_ULPI */ + /* RTC over I2C*/ #define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4) @@ -393,6 +548,17 @@ static void __init armadillo5x0_init(void) if (armadillo5x0_i2c_rtc.irq == 0) pr_warning("armadillo5x0_init: failed to get RTC IRQ\n"); i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1); + + /* USB */ +#if defined(CONFIG_USB_ULPI) + usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + + mxc_register_device(&mxc_otg_host, &usbotg_pdata); + mxc_register_device(&mxc_usbh2, &usbh2_pdata); +#endif } static void __init armadillo5x0_timer_init(void) diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c index b88c18ad7698..f54af1e29ca4 100644 --- a/arch/arm/mach-mx3/mach-mx31_3ds.c +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c @@ -23,6 +23,9 @@ #include <linux/gpio.h> #include <linux/smsc911x.h> #include <linux/platform_device.h> +#include <linux/mfd/mc13783.h> +#include <linux/spi/spi.h> +#include <linux/regulator/machine.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -31,26 +34,96 @@ #include <asm/memory.h> #include <asm/mach/map.h> #include <mach/common.h> -#include <mach/board-mx31pdk.h> +#include <mach/board-mx31_3ds.h> #include <mach/imx-uart.h> #include <mach/iomux-mx3.h> +#include <mach/mxc_nand.h> +#include <mach/spi.h> #include "devices.h" /*! - * @file mx31pdk.c + * @file mx31_3ds.c * * @brief This file contains the board-specific initialization routines. * * @ingroup System */ -static int mx31pdk_pins[] = { +static int mx31_3ds_pins[] = { /* UART1 */ MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1, MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1, IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), + /* SPI 1 */ + MX31_PIN_CSPI2_SCLK__SCLK, + MX31_PIN_CSPI2_MOSI__MOSI, + MX31_PIN_CSPI2_MISO__MISO, + MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, + MX31_PIN_CSPI2_SS0__SS0, + MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */ + /* MC13783 IRQ */ + IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO), +}; + +/* Regulators */ +static struct regulator_init_data pwgtx_init = { + .constraints = { + .boot_on = 1, + .always_on = 1, + }, +}; + +static struct mc13783_regulator_init_data mx31_3ds_regulators[] = { + { + .id = MC13783_REGU_PWGT1SPI, /* Power Gate for ARM core. */ + .init_data = &pwgtx_init, + }, { + .id = MC13783_REGU_PWGT2SPI, /* Power Gate for L2 Cache. */ + .init_data = &pwgtx_init, + }, +}; + +/* MC13783 */ +static struct mc13783_platform_data mc13783_pdata __initdata = { + .regulators = mx31_3ds_regulators, + .num_regulators = ARRAY_SIZE(mx31_3ds_regulators), + .flags = MC13783_USE_REGULATOR, +}; + +/* SPI */ +static int spi1_internal_chipselect[] = { + MXC_SPI_CS(0), + MXC_SPI_CS(2), +}; + +static struct spi_imx_master spi1_pdata = { + .chipselect = spi1_internal_chipselect, + .num_chipselect = ARRAY_SIZE(spi1_internal_chipselect), +}; + +static struct spi_board_info mx31_3ds_spi_devs[] __initdata = { + { + .modalias = "mc13783", + .max_speed_hz = 1000000, + .bus_num = 1, + .chip_select = 1, /* SS2 */ + .platform_data = &mc13783_pdata, + .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), + .mode = SPI_CS_HIGH, + }, +}; + +/* + * NAND Flash + */ +static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = { + .width = 1, + .hw_ecc = 1, +#ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT + .flash_bbt = 1, +#endif }; static struct imxuart_platform_data uart_pdata = { @@ -95,7 +168,7 @@ static struct platform_device smsc911x_device = { * LEDs, switches, interrupts for Ethernet. */ -static void mx31pdk_expio_irq_handler(uint32_t irq, struct irq_desc *desc) +static void mx31_3ds_expio_irq_handler(uint32_t irq, struct irq_desc *desc) { uint32_t imr_val; uint32_t int_valid; @@ -163,7 +236,7 @@ static struct irq_chip expio_irq_chip = { .unmask = expio_unmask_irq, }; -static int __init mx31pdk_init_expio(void) +static int __init mx31_3ds_init_expio(void) { int i; int ret; @@ -176,7 +249,7 @@ static int __init mx31pdk_init_expio(void) return -ENODEV; } - pr_info("i.MX31PDK Debug board detected, rev = 0x%04X\n", + pr_info("i.MX31 3DS Debug board detected, rev = 0x%04X\n", __raw_readw(CPLD_CODE_VER_REG)); /* @@ -201,7 +274,7 @@ static int __init mx31pdk_init_expio(void) set_irq_flags(i, IRQF_VALID); } set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW); - set_irq_chained_handler(EXPIO_PARENT_INT, mx31pdk_expio_irq_handler); + set_irq_chained_handler(EXPIO_PARENT_INT, mx31_3ds_expio_irq_handler); return 0; } @@ -209,7 +282,7 @@ static int __init mx31pdk_init_expio(void) /* * This structure defines the MX31 memory map. */ -static struct map_desc mx31pdk_io_desc[] __initdata = { +static struct map_desc mx31_3ds_io_desc[] __initdata = { { .virtual = MX31_CS5_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR), @@ -221,10 +294,10 @@ static struct map_desc mx31pdk_io_desc[] __initdata = { /* * Set up static virtual mappings. */ -static void __init mx31pdk_map_io(void) +static void __init mx31_3ds_map_io(void) { mx31_map_io(); - iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc)); + iotable_init(mx31_3ds_io_desc, ARRAY_SIZE(mx31_3ds_io_desc)); } /*! @@ -232,35 +305,40 @@ static void __init mx31pdk_map_io(void) */ static void __init mxc_board_init(void) { - mxc_iomux_setup_multiple_pins(mx31pdk_pins, ARRAY_SIZE(mx31pdk_pins), - "mx31pdk"); + mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins), + "mx31_3ds"); mxc_register_device(&mxc_uart_device0, &uart_pdata); + mxc_register_device(&mxc_nand_device, &imx31_3ds_nand_flash_pdata); + + mxc_register_device(&mxc_spi_device1, &spi1_pdata); + spi_register_board_info(mx31_3ds_spi_devs, + ARRAY_SIZE(mx31_3ds_spi_devs)); - if (!mx31pdk_init_expio()) + if (!mx31_3ds_init_expio()) platform_device_register(&smsc911x_device); } -static void __init mx31pdk_timer_init(void) +static void __init mx31_3ds_timer_init(void) { mx31_clocks_init(26000000); } -static struct sys_timer mx31pdk_timer = { - .init = mx31pdk_timer_init, +static struct sys_timer mx31_3ds_timer = { + .init = mx31_3ds_timer_init, }; /* * The following uses standard kernel macros defined in arch.h in order to - * initialize __mach_desc_MX31PDK data structure. + * initialize __mach_desc_MX31_3DS data structure. */ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") /* Maintainer: Freescale Semiconductor, Inc. */ .phys_io = MX31_AIPS1_BASE_ADDR, .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31pdk_map_io, + .map_io = mx31_3ds_map_io, .init_irq = mx31_init_irq, .init_machine = mxc_board_init, - .timer = &mx31pdk_timer, + .timer = &mx31_3ds_timer, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c index a7dc5191bf5e..fccb9207b78d 100644 --- a/arch/arm/mach-mx3/mach-mx31moboard.c +++ b/arch/arm/mach-mx3/mach-mx31moboard.c @@ -19,6 +19,7 @@ #include <linux/delay.h> #include <linux/dma-mapping.h> #include <linux/fsl_devices.h> +#include <linux/gfp.h> #include <linux/gpio.h> #include <linux/init.h> #include <linux/interrupt.h> diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c index 11f531559169..2df1ec55a97e 100644 --- a/arch/arm/mach-mx3/mach-pcm037.c +++ b/arch/arm/mach-mx3/mach-pcm037.c @@ -35,7 +35,7 @@ #include <linux/can/platform/sja1000.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> -#include <linux/fsl_devices.h> +#include <linux/gfp.h> #include <media/soc_camera.h> diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c index ccd874225c3b..093c595ca581 100644 --- a/arch/arm/mach-mx3/mx31lite-db.c +++ b/arch/arm/mach-mx3/mx31lite-db.c @@ -28,7 +28,6 @@ #include <linux/types.h> #include <linux/init.h> #include <linux/gpio.h> -#include <linux/platform_device.h> #include <linux/leds.h> #include <linux/platform_device.h> @@ -206,5 +205,6 @@ void __init mx31lite_db_init(void) mxc_register_device(&mxcsdhc_device0, &mmc_pdata); mxc_register_device(&mxc_spi_device0, &spi0_pdata); platform_device_register(&litekit_led_device); + mxc_register_device(&imx_wdt_device0, NULL); } diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index 9fbad2eb3a49..11b906ce7eae 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -20,6 +20,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/slab.h> #include <linux/types.h> #include <linux/usb/otg.h> diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index 3958515d75bf..ffb105e14d88 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -22,6 +22,7 @@ #include <linux/interrupt.h> #include <linux/i2c.h> #include <linux/spi/spi.h> +#include <linux/slab.h> #include <linux/platform_device.h> #include <linux/types.h> diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c index be90c03101cd..1ee6ce4087b8 100644 --- a/arch/arm/mach-mx5/clock-mx51.c +++ b/arch/arm/mach-mx5/clock-mx51.c @@ -16,6 +16,7 @@ #include <linux/io.h> #include <asm/clkdev.h> +#include <asm/div64.h> #include <mach/hardware.h> #include <mach/common.h> @@ -757,7 +758,7 @@ DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET, /* GPT */ DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET, - NULL, NULL, &ipg_perclk, NULL); + NULL, NULL, &ipg_clk, NULL); DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET, NULL, NULL, &ipg_clk, NULL); diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c index 41c769f08c4d..2d37785e3857 100644 --- a/arch/arm/mach-mx5/cpu.c +++ b/arch/arm/mach-mx5/cpu.c @@ -14,9 +14,62 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/module.h> #include <mach/hardware.h> #include <asm/io.h> +static int cpu_silicon_rev = -1; + +#define SI_REV 0x48 + +static void query_silicon_parameter(void) +{ + void __iomem *rom = ioremap(MX51_IROM_BASE_ADDR, MX51_IROM_SIZE); + u32 rev; + + if (!rom) { + cpu_silicon_rev = -EINVAL; + return; + } + + rev = readl(rom + SI_REV); + switch (rev) { + case 0x1: + cpu_silicon_rev = MX51_CHIP_REV_1_0; + break; + case 0x2: + cpu_silicon_rev = MX51_CHIP_REV_1_1; + break; + case 0x10: + cpu_silicon_rev = MX51_CHIP_REV_2_0; + break; + case 0x20: + cpu_silicon_rev = MX51_CHIP_REV_3_0; + break; + default: + cpu_silicon_rev = 0; + } + + iounmap(rom); +} + +/* + * Returns: + * the silicon revision of the cpu + * -EINVAL - not a mx51 + */ +int mx51_revision(void) +{ + if (!cpu_is_mx51()) + return -EINVAL; + + if (cpu_silicon_rev == -1) + query_silicon_parameter(); + + return cpu_silicon_rev; +} +EXPORT_SYMBOL(mx51_revision); + static int __init post_cpu_init(void) { unsigned int reg; diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c index c21e18be7af8..b7677ef80cc4 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-mx5/mm.c @@ -35,11 +35,6 @@ static struct map_desc mxc_io_desc[] __initdata = { .length = MX51_DEBUG_SIZE, .type = MT_DEVICE }, { - .virtual = MX51_TZIC_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX51_TZIC_BASE_ADDR), - .length = MX51_TZIC_SIZE, - .type = MT_DEVICE - }, { .virtual = MX51_AIPS1_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(MX51_AIPS1_BASE_ADDR), .length = MX51_AIPS1_SIZE, @@ -54,11 +49,6 @@ static struct map_desc mxc_io_desc[] __initdata = { .pfn = __phys_to_pfn(MX51_AIPS2_BASE_ADDR), .length = MX51_AIPS2_SIZE, .type = MT_DEVICE - }, { - .virtual = MX51_NFC_AXI_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX51_NFC_AXI_BASE_ADDR), - .length = MX51_NFC_AXI_SIZE, - .type = MT_DEVICE }, }; @@ -69,14 +59,6 @@ static struct map_desc mxc_io_desc[] __initdata = { */ void __init mx51_map_io(void) { - u32 tzic_addr; - - if (mx51_revision() < MX51_CHIP_REV_2_0) - tzic_addr = 0x8FFFC000; - else - tzic_addr = 0xE0003000; - mxc_io_desc[2].pfn = __phys_to_pfn(tzic_addr); - mxc_set_cpu_type(MXC_CPU_MX51); mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG_BASE_ADDR)); @@ -85,5 +67,17 @@ void __init mx51_map_io(void) void __init mx51_init_irq(void) { - tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR)); + unsigned long tzic_addr; + void __iomem *tzic_virt; + + if (mx51_revision() < MX51_CHIP_REV_2_0) + tzic_addr = MX51_TZIC_BASE_ADDR_TO1; + else + tzic_addr = MX51_TZIC_BASE_ADDR; + + tzic_virt = ioremap(tzic_addr, SZ_16K); + if (!tzic_virt) + panic("unable to map TZIC interrupt controller\n"); + + tzic_init_irq(tzic_virt); } diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c index 1d844e228ea9..5b84bcd30271 100644 --- a/arch/arm/mach-netx/fb.c +++ b/arch/arm/mach-netx/fb.c @@ -23,6 +23,7 @@ #include <linux/amba/bus.h> #include <linux/amba/clcd.h> #include <linux/err.h> +#include <linux/gfp.h> #include <asm/irq.h> diff --git a/arch/arm/mach-netx/xc.c b/arch/arm/mach-netx/xc.c index 181a78ba8165..f009b54e8d20 100644 --- a/arch/arm/mach-netx/xc.c +++ b/arch/arm/mach-netx/xc.c @@ -21,6 +21,7 @@ #include <linux/device.h> #include <linux/firmware.h> #include <linux/mutex.h> +#include <linux/slab.h> #include <linux/io.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-nomadik/gpio.c b/arch/arm/mach-nomadik/gpio.c index 9a09b2791e03..66b1c91ccc74 100644 --- a/arch/arm/mach-nomadik/gpio.c +++ b/arch/arm/mach-nomadik/gpio.c @@ -19,6 +19,7 @@ #include <linux/spinlock.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/slab.h> #include <mach/hardware.h> #include <mach/gpio.h> diff --git a/arch/arm/mach-ns9xxx/plat-serial8250.c b/arch/arm/mach-ns9xxx/plat-serial8250.c index 795b15e8982a..463e92465fda 100644 --- a/arch/arm/mach-ns9xxx/plat-serial8250.c +++ b/arch/arm/mach-ns9xxx/plat-serial8250.c @@ -10,6 +10,7 @@ */ #include <linux/platform_device.h> #include <linux/serial_8250.h> +#include <linux/slab.h> #include <mach/regs-board-a9m9750dev.h> #include <mach/board.h> diff --git a/arch/arm/mach-ns9xxx/processor-ns9360.c b/arch/arm/mach-ns9xxx/processor-ns9360.c index abee8338735d..aed1999d24fc 100644 --- a/arch/arm/mach-ns9xxx/processor-ns9360.c +++ b/arch/arm/mach-ns9xxx/processor-ns9360.c @@ -10,7 +10,6 @@ */ #include <linux/io.h> #include <linux/kernel.h> -#include <linux/slab.h> #include <asm/page.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index f9a5cf750b59..e9bdff192f82 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -16,6 +16,7 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/platform_device.h> +#include <linux/slab.h> #include <mach/irqs.h> #include <plat/dma.h> diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 9ad118563f7d..20cfbcc6c60c 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -68,12 +68,6 @@ struct sys_timer omap_timer; * --------------------------------------------------------------------------- */ -#if defined(CONFIG_ARCH_OMAP16XX) -#define TIMER_32K_SYNCHRONIZED 0xfffbc410 -#else -#error OMAP 32KHz timer does not currently work on 15XX! -#endif - /* 16xx specific defines */ #define OMAP1_32K_TIMER_BASE 0xfffb9000 #define OMAP1_32K_TIMER_CR 0x08 @@ -150,15 +144,6 @@ static struct clock_event_device clockevent_32k_timer = { .set_mode = omap_32k_timer_set_mode, }; -/* - * The 32KHz synchronized timer is an additional timer on 16xx. - * It is always running. - */ -static inline unsigned long omap_32k_sync_timer_read(void) -{ - return omap_readl(TIMER_32K_SYNCHRONIZED); -} - static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id) { struct clock_event_device *evt = &clockevent_32k_timer; diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index a8a3d1e23e26..2455dcc744a0 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -59,8 +59,10 @@ config MACH_OMAP3_BEAGLE select OMAP_PACKAGE_CBB config MACH_DEVKIT8000 - bool "DEVKIT8000 board" - depends on ARCH_OMAP3 + bool "DEVKIT8000 board" + depends on ARCH_OMAP3 + select OMAP_PACKAGE_CUS + select OMAP_MUX config MACH_OMAP_LDP bool "OMAP3 LDP board" diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index a0a2a113465c..504d2bd222fe 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -96,6 +96,7 @@ static struct omap_board_mux board_mux[] __initdata = { static void __init omap_sdp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); + omap_serial_init(); zoom_peripherals_init(); board_smc91x_init(); enable_board_wakeup_source(); diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 6ae880585d54..c1c4389fbd8f 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -294,9 +294,9 @@ static struct omap_board_mux board_mux[] __initdata = { static void __init am3517_evm_init(void) { - am3517_evm_i2c_init(); - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + + am3517_evm_i2c_init(); platform_add_devices(am3517_evm_devices, ARRAY_SIZE(am3517_evm_devices)); diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 5bfc13b3176c..47e3af2166d4 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -50,7 +50,6 @@ #include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> -#include <linux/usb/otg.h> #include <linux/dm9000.h> #include <linux/interrupt.h> @@ -269,20 +268,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev, devkit8000_vmmc1_supply.dev = mmc[0].dev; devkit8000_vsim_supply.dev = mmc[0].dev; - /* REVISIT: need ehci-omap hooks for external VBUS - * power switch and overcurrent detect - */ - - gpio_request(gpio + 1, "EHCI_nOC"); - gpio_direction_input(gpio + 1); - - /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ - gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1); - - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - return 0; } @@ -303,7 +288,7 @@ static struct regulator_consumer_supply devkit8000_vpll2_supplies[] = { .dev = &devkit8000_lcd_device.dev, }, { - .supply = "vdss_dsi", + .supply = "vdds_dsi", .dev = &devkit8000_dss_device.dev, } }; @@ -639,17 +624,21 @@ static struct omap_musb_board_data musb_board_data = { static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 147, + .reset_gpio_port[1] = -EINVAL, .reset_gpio_port[2] = -EINVAL }; static void __init devkit8000_init(void) { + omap_serial_init(); + + omap_dm9000_init(); + devkit8000_i2c_init(); platform_add_devices(devkit8000_devices, ARRAY_SIZE(devkit8000_devices)); @@ -659,25 +648,15 @@ static void __init devkit8000_init(void) spi_register_board_info(devkit8000_spi_board_info, ARRAY_SIZE(devkit8000_spi_board_info)); - omap_serial_init(); - - omap_dm9000_init(); - devkit8000_ads7846_init(); - omap_mux_init_gpio(170, OMAP_PIN_INPUT); - - gpio_request(170, "DVI_nPD"); - /* REVISIT leave DVI powered down until it's needed ... */ - gpio_direction_output(170, true); - usb_musb_init(&musb_board_data); usb_ehci_init(&ehci_pdata); devkit8000_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ - omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT); - omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); } static void __init devkit8000_map_io(void) diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 3c7789d45051..d55c57b761a9 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -458,13 +458,13 @@ static struct omap_musb_board_data musb_board_data = { }; static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = IGEP2_GPIO_USBH_NRESET, + .reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET, + .reset_gpio_port[1] = -EINVAL, .reset_gpio_port[2] = -EINVAL, }; diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index da9bcb898991..3ccc34ebdcc7 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -216,7 +216,7 @@ static void __init n8x0_onenand_init(void) {} */ #define N8X0_SLOT_SWITCH_GPIO 96 #define N810_EMMC_VSD_GPIO 23 -#define NN810_EMMC_VIO_GPIO 9 +#define N810_EMMC_VIO_GPIO 9 static int n8x0_mmc_switch_slot(struct device *dev, int slot) { @@ -304,10 +304,10 @@ static void n810_set_power_emmc(struct device *dev, if (power_on) { gpio_set_value(N810_EMMC_VSD_GPIO, 1); msleep(1); - gpio_set_value(NN810_EMMC_VIO_GPIO, 1); + gpio_set_value(N810_EMMC_VIO_GPIO, 1); msleep(1); } else { - gpio_set_value(NN810_EMMC_VIO_GPIO, 0); + gpio_set_value(N810_EMMC_VIO_GPIO, 0); msleep(50); gpio_set_value(N810_EMMC_VSD_GPIO, 0); msleep(50); @@ -468,7 +468,7 @@ static void n8x0_mmc_cleanup(struct device *dev) if (machine_is_nokia_n810()) { gpio_free(N810_EMMC_VSD_GPIO); - gpio_free(NN810_EMMC_VIO_GPIO); + gpio_free(N810_EMMC_VIO_GPIO); } } @@ -529,7 +529,7 @@ void __init n8x0_mmc_init(void) err = gpio_request(N8X0_SLOT_SWITCH_GPIO, "MMC slot switch"); if (err) - return err; + return; gpio_direction_output(N8X0_SLOT_SWITCH_GPIO, 0); @@ -537,17 +537,17 @@ void __init n8x0_mmc_init(void) err = gpio_request(N810_EMMC_VSD_GPIO, "MMC slot 2 Vddf"); if (err) { gpio_free(N8X0_SLOT_SWITCH_GPIO); - return err; + return; } gpio_direction_output(N810_EMMC_VSD_GPIO, 0); - err = gpio_request(NN810_EMMC_VIO_GPIO, "MMC slot 2 Vdd"); + err = gpio_request(N810_EMMC_VIO_GPIO, "MMC slot 2 Vdd"); if (err) { gpio_free(N8X0_SLOT_SWITCH_GPIO); gpio_free(N810_EMMC_VSD_GPIO); - return err; + return; } - gpio_direction_output(NN810_EMMC_VIO_GPIO, 0); + gpio_direction_output(N810_EMMC_VIO_GPIO, 0); } mmc_data[0] = &mmc1_data; diff --git a/arch/arm/mach-omap2/board-sdp-flash.c b/arch/arm/mach-omap2/board-sdp-flash.c index b1b88deec7f2..2d026328e385 100644 --- a/arch/arm/mach-omap2/board-sdp-flash.c +++ b/arch/arm/mach-omap2/board-sdp-flash.c @@ -253,20 +253,20 @@ void __init sdp_flash_init(struct flash_partitions sdp_partition_info[]) } if (norcs > GPMC_CS_NUM) - printk(KERN_INFO "OneNAND: Unable to find configuration " - " in GPMC\n "); + printk(KERN_INFO "NOR: Unable to find configuration " + "in GPMC\n"); else board_nor_init(sdp_partition_info[0], norcs); if (onenandcs > GPMC_CS_NUM) printk(KERN_INFO "OneNAND: Unable to find configuration " - " in GPMC\n "); + "in GPMC\n"); else board_onenand_init(sdp_partition_info[1], onenandcs); if (nandcs > GPMC_CS_NUM) printk(KERN_INFO "NAND: Unable to find configuration " - " in GPMC\n "); + "in GPMC\n"); else board_nand_init(sdp_partition_info[2], nandcs); } diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index bb4018b60642..e15d2e87cfc1 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -96,7 +96,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device zoom_debugboard_serial_device = { .name = "serial8250", - .id = 3, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index ca95d8d64136..6b3984964cc5 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -280,7 +280,6 @@ static void enable_board_wakeup_source(void) void __init zoom_peripherals_init(void) { omap_i2c_init(); - omap_serial_init(); usb_musb_init(&musb_board_data); enable_board_wakeup_source(); } diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index 3b1eac4d5390..e60ca4e47bbd 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -31,6 +31,7 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/cpufreq.h> +#include <linux/slab.h> #include <plat/clock.h> #include <plat/sram.h> diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index d5153b6bd6cb..9cba5560519b 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -895,7 +895,7 @@ static struct clk dpll4_m4x2_ck = { .ops = &clkops_omap2_dflt_wait, .parent = &dpll4_m4_ck, .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, + .enable_bit = OMAP3430_PWRDN_DSS1_SHIFT, .flags = INVERT_ENABLE, .clkdm_name = "dpll4_clkdm", .recalc = &omap3_clkoutx2_recalc, diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 28b107967c86..a5c0c9c8e496 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -2671,10 +2671,10 @@ static struct omap_clk omap44xx_clks[] = { CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_443X), CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_443X), CLK("omap-mcbsp.4", "ick", &dummy_ck, CK_443X), - CLK("omap-mcspi.1", "ick", &dummy_ck, CK_443X), - CLK("omap-mcspi.2", "ick", &dummy_ck, CK_443X), - CLK("omap-mcspi.3", "ick", &dummy_ck, CK_443X), - CLK("omap-mcspi.4", "ick", &dummy_ck, CK_443X), + CLK("omap2_mcspi.1", "ick", &dummy_ck, CK_443X), + CLK("omap2_mcspi.2", "ick", &dummy_ck, CK_443X), + CLK("omap2_mcspi.3", "ick", &dummy_ck, CK_443X), + CLK("omap2_mcspi.4", "ick", &dummy_ck, CK_443X), CLK(NULL, "uart1_ick", &dummy_ck, CK_443X), CLK(NULL, "uart2_ick", &dummy_ck, CK_443X), CLK(NULL, "uart3_ick", &dummy_ck, CK_443X), diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index b87ad66f083e..6e568ec995ee 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -240,7 +240,7 @@ static void _omap2_clkdm_set_hwsup(struct clockdomain *clkdm, int enable) bits = OMAP24XX_CLKSTCTRL_ENABLE_AUTO; else bits = OMAP24XX_CLKSTCTRL_DISABLE_AUTO; - } else if (cpu_is_omap34xx() | cpu_is_omap44xx()) { + } else if (cpu_is_omap34xx() || cpu_is_omap44xx()) { if (enable) bits = OMAP34XX_CLKSTCTRL_ENABLE_AUTO; else @@ -812,7 +812,7 @@ int omap2_clkdm_sleep(struct clockdomain *clkdm) cm_set_mod_reg_bits(OMAP24XX_FORCESTATE, clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL); - } else if (cpu_is_omap34xx() | cpu_is_omap44xx()) { + } else if (cpu_is_omap34xx() || cpu_is_omap44xx()) { u32 bits = (OMAP34XX_CLKSTCTRL_FORCE_SLEEP << __ffs(clkdm->clktrctrl_mask)); @@ -856,7 +856,7 @@ int omap2_clkdm_wakeup(struct clockdomain *clkdm) cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE, clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL); - } else if (cpu_is_omap34xx() | cpu_is_omap44xx()) { + } else if (cpu_is_omap34xx() || cpu_is_omap44xx()) { u32 bits = (OMAP34XX_CLKSTCTRL_FORCE_WAKEUP << __ffs(clkdm->clktrctrl_mask)); diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 23e4d7733610..2271b9bd1f50 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -726,7 +726,7 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, if (!cpu_is_omap44xx()) return; base = OMAP4_MMC5_BASE + OMAP4_MMC_REG_OFFSET; - irq = OMAP44XX_IRQ_MMC4; + irq = OMAP44XX_IRQ_MMC5; break; default: continue; diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 64d74f05abbe..e57fb29ff855 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -39,6 +39,9 @@ static int omap2_nand_gpmc_retime(void) struct gpmc_timings t; int err; + if (!gpmc_nand_data->gpmc_t) + return 0; + memset(&t, 0, sizeof(t)); t.sync_clk = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->sync_clk); t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on); diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S index ff25c7e4e606..50fd74916643 100644 --- a/arch/arm/mach-omap2/include/mach/entry-macro.S +++ b/arch/arm/mach-omap2/include/mach/entry-macro.S @@ -52,7 +52,7 @@ omap_irq_base: .word 0 mrc p15, 0, \tmp, c0, c0, 0 @ get processor revision and \tmp, \tmp, #0x000f0000 @ only check architecture - cmp \tmp, #0x00060000 @ is v6? + cmp \tmp, #0x00070000 @ is v6? beq 2400f @ found v6 so it's omap24xx mrc p15, 0, \tmp, c0, c0, 0 @ get processor revision and \tmp, \tmp, #0x000000f0 @ check cortex 8 or 9 diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c index 6f4b7cc8f4d1..4f63dc6859a4 100644 --- a/arch/arm/mach-omap2/iommu2.c +++ b/arch/arm/mach-omap2/iommu2.c @@ -15,6 +15,7 @@ #include <linux/device.h> #include <linux/jiffies.h> #include <linux/module.h> +#include <linux/slab.h> #include <linux/stringify.h> #include <plat/iommu.h> diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index be8fce395a58..2f3cad6f9402 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -16,6 +16,7 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/platform_device.h> +#include <linux/slab.h> #include <mach/irqs.h> #include <plat/dma.h> diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index b4ca84ee0a95..8b3d26935a39 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -26,6 +26,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/slab.h> #include <linux/spinlock.h> #include <linux/list.h> #include <linux/ctype.h> diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index aa3f65c2ac97..ef0e7a00dd6c 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -33,7 +33,7 @@ ENTRY(omap_secondary_startup) hold: ldr r12,=0x103 dsb - smc @ read from AuxCoreBoot0 + smc #0 @ read from AuxCoreBoot0 mov r0, r0, lsr #9 mrc p15, 0, r4, c0, c0, 5 and r4, r4, #0x0f @@ -52,7 +52,7 @@ ENTRY(omap_modify_auxcoreboot0) stmfd sp!, {r1-r12, lr} ldr r12, =0x104 dsb - smc + smc #0 ldmfd sp!, {r1-r12, pc} END(omap_modify_auxcoreboot0) @@ -60,6 +60,6 @@ ENTRY(omap_auxcoreboot_addr) stmfd sp!, {r2-r12, lr} ldr r12, =0x105 dsb - smc + smc #0 ldmfd sp!, {r2-r12, pc} END(omap_auxcoreboot_addr) diff --git a/arch/arm/mach-omap2/omap44xx-smc.S b/arch/arm/mach-omap2/omap44xx-smc.S index 89bb2b141473..f61c7771ca47 100644 --- a/arch/arm/mach-omap2/omap44xx-smc.S +++ b/arch/arm/mach-omap2/omap44xx-smc.S @@ -27,6 +27,6 @@ ENTRY(omap_smc1) mov r12, r0 mov r0, r1 dsb - smc + smc #0 ldmfd sp!, {r2-r12, pc} END(omap_smc1) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index c6649472ce0d..e436dcb19795 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1511,6 +1511,9 @@ struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh) c = oh->slaves[oh->_mpu_port_index]->_clk; } + if (!c->clkdm) + return NULL; + return c->clkdm->pwrdm.ptr; } diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index c18f7f2f19bc..6cac9817c243 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -25,6 +25,7 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/module.h> +#include <linux/slab.h> #include <plat/clock.h> #include <plat/board.h> diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index fee2efb172e7..ea0000bc5358 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -27,6 +27,7 @@ #include <linux/gpio.h> #include <linux/clk.h> #include <linux/delay.h> +#include <linux/slab.h> #include <plat/sram.h> #include <plat/clockdomain.h> diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 9a0fb385622b..ebfce7d1a5d3 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -222,7 +222,7 @@ void pwrdm_init(struct powerdomain **pwrdm_list) { struct powerdomain **p = NULL; - if (cpu_is_omap24xx() | cpu_is_omap34xx()) { + if (cpu_is_omap24xx() || cpu_is_omap34xx()) { pwrstctrl_reg_offs = OMAP2_PM_PWSTCTRL; pwrstst_reg_offs = OMAP2_PM_PWSTST; } else if (cpu_is_omap44xx()) { diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 9537f6f2352d..07a60f1204ca 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -123,7 +123,7 @@ struct omap3_prcm_regs prcm_context; u32 omap_prcm_get_reset_sources(void) { /* XXX This presumably needs modification for 34XX */ - if (cpu_is_omap24xx() | cpu_is_omap34xx()) + if (cpu_is_omap24xx() || cpu_is_omap34xx()) return prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST) & 0x7f; if (cpu_is_omap44xx()) return prm_read_mod_reg(WKUP_MOD, OMAP4_RM_RSTST) & 0x7f; @@ -157,7 +157,7 @@ void omap_prcm_arch_reset(char mode, const char *cmd) else WARN_ON(1); - if (cpu_is_omap24xx() | cpu_is_omap34xx()) + if (cpu_is_omap24xx() || cpu_is_omap34xx()) prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs, OMAP2_RM_RSTCTRL); if (cpu_is_omap44xx()) diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index da77930480e9..3771254dfa81 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -115,7 +115,6 @@ static struct plat_serial8250_port serial_platform_data2[] = { } }; -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) static struct plat_serial8250_port serial_platform_data3[] = { { .irq = 70, @@ -128,23 +127,12 @@ static struct plat_serial8250_port serial_platform_data3[] = { } }; -static inline void omap2_set_globals_uart4(struct omap_globals *omap2_globals) -{ - serial_platform_data3[0].mapbase = omap2_globals->uart4_phys; -} -#else -static inline void omap2_set_globals_uart4(struct omap_globals *omap2_globals) -{ -} -#endif - void __init omap2_set_globals_uart(struct omap_globals *omap2_globals) { serial_platform_data0[0].mapbase = omap2_globals->uart1_phys; serial_platform_data1[0].mapbase = omap2_globals->uart2_phys; serial_platform_data2[0].mapbase = omap2_globals->uart3_phys; - if (cpu_is_omap3630() || cpu_is_omap44xx()) - omap2_set_globals_uart4(omap2_globals); + serial_platform_data3[0].mapbase = omap2_globals->uart4_phys; } static inline unsigned int __serial_read_reg(struct uart_port *up, @@ -550,7 +538,7 @@ static ssize_t sleep_timeout_store(struct device *dev, unsigned int value; if (sscanf(buf, "%u", &value) != 1) { - printk(KERN_ERR "sleep_timeout_store: Invalid value\n"); + dev_err(dev, "sleep_timeout_store: Invalid value\n"); return -EINVAL; } @@ -664,27 +652,33 @@ void __init omap_serial_early_init(void) struct device *dev = &pdev->dev; struct plat_serial8250_port *p = dev->platform_data; + /* Don't map zero-based physical address */ + if (p->mapbase == 0) { + dev_warn(dev, "no physical address for uart#%d," + " so skipping early_init...\n", i); + continue; + } /* * Module 4KB + L4 interconnect 4KB * Static mapping, never released */ p->membase = ioremap(p->mapbase, SZ_8K); if (!p->membase) { - printk(KERN_ERR "ioremap failed for uart%i\n", i + 1); + dev_err(dev, "ioremap failed for uart%i\n", i + 1); continue; } sprintf(name, "uart%d_ick", i + 1); uart->ick = clk_get(NULL, name); if (IS_ERR(uart->ick)) { - printk(KERN_ERR "Could not get uart%d_ick\n", i + 1); + dev_err(dev, "Could not get uart%d_ick\n", i + 1); uart->ick = NULL; } sprintf(name, "uart%d_fck", i+1); uart->fck = clk_get(NULL, name); if (IS_ERR(uart->fck)) { - printk(KERN_ERR "Could not get uart%d_fck\n", i + 1); + dev_err(dev, "Could not get uart%d_fck\n", i + 1); uart->fck = NULL; } @@ -727,6 +721,13 @@ void __init omap_serial_init_port(int port) pdev = &uart->pdev; dev = &pdev->dev; + /* Don't proceed if there's no clocks available */ + if (unlikely(!uart->ick || !uart->fck)) { + WARN(1, "%s: can't init uart%d, no clocks available\n", + kobject_name(&dev->kobj), port); + return; + } + omap_uart_enable_clocks(uart); omap_uart_reset(uart); diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index bdf96eb523bc..e8706f15a670 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -12,6 +12,7 @@ #include <linux/kernel.h> #include <linux/pci.h> +#include <linux/slab.h> #include <linux/mbus.h> #include <asm/irq.h> #include <asm/mach/pci.h> diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index cb0feca193d4..f9f222ebb7ed 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -77,7 +77,7 @@ static struct gpio_keys_button wrt350n_v2_buttons[] = { .desc = "Reset Button", .active_low = 1, }, { - .code = KEY_WLAN, + .code = KEY_WPS_BUTTON, .gpio = 2, .desc = "WPS Button", .active_low = 1, diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c index 425f7188505e..7fa4bf2e2125 100644 --- a/arch/arm/mach-pnx4008/dma.c +++ b/arch/arm/mach-pnx4008/dma.c @@ -22,6 +22,7 @@ #include <linux/dma-mapping.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/gfp.h> #include <asm/system.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c index 1f0585329be4..ee3c29c57ae3 100644 --- a/arch/arm/mach-pnx4008/pm.c +++ b/arch/arm/mach-pnx4008/pm.c @@ -19,6 +19,7 @@ #include <linux/delay.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/slab.h> #include <asm/cacheflush.h> diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 38fbd0a0e402..5b6ee46fa7f6 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -272,7 +272,6 @@ config MACH_H5000 config MACH_HIMALAYA bool "HTC Himalaya Support" select CPU_PXA26x - select FB_W100 config MACH_MAGICIAN bool "Enable HTC Magician Support" @@ -454,6 +453,13 @@ config PXA_SHARPSL config SHARPSL_PM bool select APM_EMULATION + select SHARPSL_PM_MAX1111 + +config SHARPSL_PM_MAX1111 + bool + depends on !CORGI_SSP_DEPRECATED + select HWMON + select SENSORS_MAX1111 config CORGI_SSP_DEPRECATED bool @@ -547,7 +553,6 @@ config MACH_E740 bool "Toshiba e740" default y depends on ARCH_PXA_ESERIES - select FB_W100 help Say Y here if you intend to run this kernel on a Toshiba e740 family PDA. @@ -556,7 +561,6 @@ config MACH_E750 bool "Toshiba e750" default y depends on ARCH_PXA_ESERIES - select FB_W100 help Say Y here if you intend to run this kernel on a Toshiba e750 family PDA. @@ -573,7 +577,6 @@ config MACH_E800 bool "Toshiba e800" default y depends on ARCH_PXA_ESERIES - select FB_W100 help Say Y here if you intend to run this kernel on a Toshiba e800 family PDA. diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index 1d9bc118ee32..9347254f8bcf 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -13,7 +13,6 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/sched.h> -#include <linux/slab.h> #include <linux/delay.h> #include <linux/platform_device.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c index 149cdd9aee4d..27fa329d9a8b 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c @@ -14,6 +14,7 @@ #include <linux/sched.h> #include <linux/init.h> #include <linux/cpufreq.h> +#include <linux/slab.h> #include <mach/pxa3xx-regs.h> diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c index b2f878bd460b..5161dca8ccc0 100644 --- a/arch/arm/mach-pxa/imote2.c +++ b/arch/arm/mach-pxa/imote2.c @@ -559,10 +559,6 @@ static void __init imote2_init(void) pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - /* SPI chip select directions - all other directions should - * be handled by drivers.*/ - gpio_direction_output(37, 0); - platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices)); pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info); diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index 811743c56147..5f2ba8d9015c 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -2,6 +2,7 @@ #define _COLIBRI_H_ #include <net/ax88796.h> +#include <mach/mfp.h> /* * common settings for all modules diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index 7515757d6911..3d8d8cb09685 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -202,7 +202,7 @@ #define __cpu_is_pxa950(id) \ ({ \ unsigned int _id = (id) >> 4 & 0xfff; \ - id == 0x697; \ + _id == 0x697; \ }) #else #define __cpu_is_pxa950(id) (0) diff --git a/arch/arm/mach-pxa/include/mach/regs-u2d.h b/arch/arm/mach-pxa/include/mach/regs-u2d.h index 44b0b20b69a4..c15c0c57de08 100644 --- a/arch/arm/mach-pxa/include/mach/regs-u2d.h +++ b/arch/arm/mach-pxa/include/mach/regs-u2d.h @@ -166,7 +166,8 @@ #define U2DMACSR_BUSERRTYPE (7 << 10) /* PX Bus Error Type */ #define U2DMACSR_EORINTR (1 << 9) /* End Of Receive */ #define U2DMACSR_REQPEND (1 << 8) /* Request Pending */ -#define U2DMACSR_RASINTR (1 << 4) /* Request After Channel Stopped (read / write 1 clear) */#define U2DMACSR_STOPINTR (1 << 3) /* Stop Interrupt (read only) */ +#define U2DMACSR_RASINTR (1 << 4) /* Request After Channel Stopped (read / write 1 clear) */ +#define U2DMACSR_STOPINTR (1 << 3) /* Stop Interrupt (read only) */ #define U2DMACSR_ENDINTR (1 << 2) /* End Interrupt (read / write 1 clear) */ #define U2DMACSR_STARTINTR (1 << 1) /* Start Interrupt (read / write 1 clear) */ #define U2DMACSR_BUSERRINTR (1 << 0) /* Bus Error Interrupt (read / write 1 clear) */ diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h index 5ef91d9d17e4..759b851ec985 100644 --- a/arch/arm/mach-pxa/include/mach/uncompress.h +++ b/arch/arm/mach-pxa/include/mach/uncompress.h @@ -16,9 +16,9 @@ #define BTUART_BASE (0x40200000) #define STUART_BASE (0x40700000) -static unsigned long uart_base = FFUART_BASE; -static unsigned int uart_shift = 2; -static unsigned int uart_is_pxa = 1; +static unsigned long uart_base; +static unsigned int uart_shift; +static unsigned int uart_is_pxa; static inline unsigned char uart_read(int offset) { @@ -56,6 +56,11 @@ static inline void flush(void) static inline void arch_decomp_setup(void) { + /* initialize to default */ + uart_base = FFUART_BASE; + uart_shift = 2; + uart_is_pxa = 1; + if (machine_is_littleton() || machine_is_intelmote2() || machine_is_csb726() || machine_is_stargate2() || machine_is_cm_x300() || machine_is_balloon3()) diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 843fcca76e26..7a50ed8fce94 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -38,6 +38,7 @@ #include <linux/mtd/physmap.h> #include <linux/usb/gpio_vbus.h> #include <linux/regulator/max1586.h> +#include <linux/slab.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 7693355ee637..166c15f62916 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -14,6 +14,7 @@ #include <linux/module.h> #include <linux/suspend.h> #include <linux/errno.h> +#include <linux/slab.h> #include <mach/pm.h> diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 3184bdc14526..d12667bd9ebe 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -37,8 +37,6 @@ #include <linux/lis3lv02d.h> #include <linux/pda_power.h> #include <linux/power_supply.h> -#include <linux/pda_power.h> -#include <linux/power_supply.h> #include <linux/regulator/max8660.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> @@ -444,7 +442,7 @@ static struct gpio_keys_button gpio_keys_button[] = { .active_low = 0, .wakeup = 0, .debounce_interval = 5, /* ms */ - .desc = "on/off button", + .desc = "on_off button", }, }; @@ -985,7 +983,7 @@ static void __init raumfeld_common_init(void) int i; for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++) - if (!strcmp(gpio_keys_button[i].desc, "on/off button")) + if (!strcmp(gpio_keys_button[i].desc, "on_off button")) gpio_keys_button[i].active_low = 1; } @@ -1011,8 +1009,7 @@ static void __init raumfeld_common_init(void) gpio_direction_output(GPIO_W2W_PDN, 0); /* this can be used to switch off the device */ - ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, - "supply shutdown"); + ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown"); if (ret < 0) pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n"); else diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 19b5109d9808..01bdd7500df4 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -363,7 +363,7 @@ static struct gpio_keys_button spitz_gpio_keys[] = { .type = EV_PWR, .code = KEY_SUSPEND, .gpio = SPITZ_GPIO_ON_KEY, - .desc = "On/Off", + .desc = "On Off", .wakeup = 1, }, /* Two buttons detecting the lid state */ diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index a98a434f0111..2041eb1d90ba 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -764,11 +764,6 @@ static void __init stargate2_init(void) pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - /* spi chip selects */ - gpio_direction_output(37, 0); - gpio_direction_output(24, 0); - gpio_direction_output(39, 0); - platform_add_devices(ARRAY_AND_SIZE(stargate2_devices)); pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info); diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 1dd13346f977..e90114a7e246 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -27,12 +27,14 @@ #include <linux/delay.h> #include <linux/fs.h> #include <linux/init.h> +#include <linux/slab.h> #include <linux/interrupt.h> #include <linux/major.h> #include <linux/module.h> #include <linux/pm.h> #include <linux/sched.h> #include <linux/gpio.h> +#include <linux/jiffies.h> #include <linux/i2c-gpio.h> #include <linux/serial_8250.h> #include <linux/smc91x.h> @@ -453,7 +455,7 @@ static struct i2c_gpio_platform_data i2c_bus_data = { .sda_pin = VIPER_RTC_I2C_SDA_GPIO, .scl_pin = VIPER_RTC_I2C_SCL_GPIO, .udelay = 10, - .timeout = 100, + .timeout = HZ, }; static struct platform_device i2c_bus_device = { @@ -778,7 +780,7 @@ static void __init viper_tpm_init(void) .sda_pin = VIPER_TPM_I2C_SDA_GPIO, .scl_pin = VIPER_TPM_I2C_SCL_GPIO, .udelay = 10, - .timeout = 100, + .timeout = HZ, }; char *errstr; diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 90bd4ef71b2c..d5a95738f85b 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -31,6 +31,7 @@ #include <linux/smsc911x.h> #include <linux/ata_platform.h> #include <linux/amba/mmci.h> +#include <linux/gfp.h> #include <asm/clkdev.h> #include <asm/system.h> @@ -253,7 +254,7 @@ static unsigned int realview_mmc_status(struct device *dev) else mask = 2; - return readl(REALVIEW_SYSMCI) & mask; + return !(readl(REALVIEW_SYSMCI) & mask); } struct mmci_platform_data realview_mmc0_plat_data = { diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c index c47d974d52bd..85883b2e0e49 100644 --- a/arch/arm/mach-rpc/dma.c +++ b/arch/arm/mach-rpc/dma.c @@ -9,7 +9,6 @@ * * DMA functions specific to RiscPC architecture */ -#include <linux/slab.h> #include <linux/mman.h> #include <linux/init.h> #include <linux/interrupt.h> diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index b62bdf18dca4..33ccf7bf766a 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -18,6 +18,7 @@ #include <linux/dmapool.h> #include <linux/sysdev.h> #include <linux/errno.h> +#include <linux/slab.h> #include <linux/delay.h> #include <linux/clk.h> #include <linux/err.h> diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index b17d52f7cc48..fd4c52b7ccb6 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -57,7 +57,7 @@ config SA1100_COLLIE config SA1100_H3100 bool "Compaq iPAQ H3100" select HTC_EGPIO - select CPU_FREQ_SA1100 + select CPU_FREQ_SA1110 help Say Y here if you intend to run this kernel on the Compaq iPAQ H3100 handheld computer. Information about this machine and the @@ -68,7 +68,7 @@ config SA1100_H3100 config SA1100_H3600 bool "Compaq iPAQ H3600/H3700" select HTC_EGPIO - select CPU_FREQ_SA1100 + select CPU_FREQ_SA1110 help Say Y here if you intend to run this kernel on the Compaq iPAQ H3600 handheld computer. Information about this machine and the diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c index 63b32b68b296..7252874d328b 100644 --- a/arch/arm/mach-sa1100/cpu-sa1110.c +++ b/arch/arm/mach-sa1100/cpu-sa1110.c @@ -363,6 +363,9 @@ static int __init sa1110_clk_init(void) struct sdram_params *sdram; const char *name = sdram_name; + if (!cpu_is_sa1110()) + return -ENODEV; + if (!name[0]) { if (machine_is_assabet()) name = "TC59SM716-CL3"; diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c index 9b6dee5d16db..9d490c66891c 100644 --- a/arch/arm/mach-sa1100/jornada720_ssp.c +++ b/arch/arm/mach-sa1100/jornada720_ssp.c @@ -18,7 +18,6 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/sched.h> -#include <linux/slab.h> #include <mach/hardware.h> #include <mach/jornada720.h> diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 0b505d9f22d6..c601a75a333d 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -8,7 +8,6 @@ #include <linux/ioport.h> #include <linux/serial_core.h> #include <linux/platform_device.h> -#include <linux/slab.h> #include <mach/hardware.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c index 962f9de454de..5f55012b7c9e 100644 --- a/arch/arm/mach-u300/dummyspichip.c +++ b/arch/arm/mach-u300/dummyspichip.c @@ -15,6 +15,7 @@ #include <linux/mutex.h> #include <linux/spi/spi.h> #include <linux/dma-mapping.h> +#include <linux/slab.h> /* * WARNING! Do not include this pl022-specific controller header * for any generic driver. It is only done in this dummy chip diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c index 109f5a6e71c7..77fbb1e0e528 100644 --- a/arch/arm/mach-u300/mmc.c +++ b/arch/arm/mach-u300/mmc.c @@ -20,6 +20,7 @@ #include <linux/regulator/machine.h> #include <linux/gpio.h> #include <linux/amba/mmci.h> +#include <linux/slab.h> #include "mmc.h" #include "padmux.h" diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 9ddb49b1cb71..3b1a4ee01815 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -32,6 +32,7 @@ #include <linux/clockchips.h> #include <linux/cnt32_to_63.h> #include <linux/io.h> +#include <linux/gfp.h> #include <asm/clkdev.h> #include <asm/system.h> diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index 7161ba23b58a..334f0df4e948 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -16,7 +16,6 @@ */ #include <linux/kernel.h> #include <linux/pci.h> -#include <linux/slab.h> #include <linux/ioport.h> #include <linux/interrupt.h> #include <linux/spinlock.h> diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c index 48876122df91..e2958eb567f9 100644 --- a/arch/arm/mach-w90x900/dev.c +++ b/arch/arm/mach-w90x900/dev.c @@ -18,6 +18,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/slab.h> #include <linux/mtd/physmap.h> #include <linux/mtd/mtd.h> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index c4ed9f93f646..5bd7c89a6045 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -736,6 +736,12 @@ config NEEDS_SYSCALL_FOR_CMPXCHG config OUTER_CACHE bool +config OUTER_CACHE_SYNC + bool + help + The outer cache has a outer_cache_fns.sync function pointer + that can be used to drain the write buffer of the outer cache. + config CACHE_FEROCEON_L2 bool "Enable the Feroceon L2 cache controller" depends on ARCH_KIRKWOOD || ARCH_MV78XX0 @@ -757,6 +763,7 @@ config CACHE_L2X0 REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || ARCH_NOMADIK || ARCH_OMAP4 default y select OUTER_CACHE + select OUTER_CACHE_SYNC help This option enables the L2x0 PrimeCell. @@ -781,3 +788,9 @@ config ARM_L1_CACHE_SHIFT int default 6 if ARM_L1_CACHE_SHIFT_6 default 5 + +config ARCH_HAS_BARRIERS + bool + help + This option allows the use of custom mandatory barriers + included via the mach/barriers.h file. diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index edddd66faac6..a2ab51fa73e2 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -166,15 +166,15 @@ union offset_union { THUMB( "1: "ins" %1, [%2]\n" ) \ THUMB( " add %2, %2, #1\n" ) \ "2:\n" \ - " .section .fixup,\"ax\"\n" \ + " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ "3: mov %0, #1\n" \ " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ + " .popsection\n" \ + " .pushsection __ex_table,\"a\"\n" \ " .align 3\n" \ " .long 1b, 3b\n" \ - " .previous\n" \ + " .popsection\n" \ : "=r" (err), "=&r" (val), "=r" (addr) \ : "0" (err), "2" (addr)) @@ -226,16 +226,16 @@ union offset_union { " mov %1, %1, "NEXT_BYTE"\n" \ "2: "ins" %1, [%2]\n" \ "3:\n" \ - " .section .fixup,\"ax\"\n" \ + " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ "4: mov %0, #1\n" \ " b 3b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ + " .popsection\n" \ + " .pushsection __ex_table,\"a\"\n" \ " .align 3\n" \ " .long 1b, 4b\n" \ " .long 2b, 4b\n" \ - " .previous\n" \ + " .popsection\n" \ : "=r" (err), "=&r" (v), "=&r" (a) \ : "0" (err), "1" (v), "2" (a)); \ if (err) \ @@ -266,18 +266,18 @@ union offset_union { " mov %1, %1, "NEXT_BYTE"\n" \ "4: "ins" %1, [%2]\n" \ "5:\n" \ - " .section .fixup,\"ax\"\n" \ + " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ "6: mov %0, #1\n" \ " b 5b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ + " .popsection\n" \ + " .pushsection __ex_table,\"a\"\n" \ " .align 3\n" \ " .long 1b, 6b\n" \ " .long 2b, 6b\n" \ " .long 3b, 6b\n" \ " .long 4b, 6b\n" \ - " .previous\n" \ + " .popsection\n" \ : "=r" (err), "=&r" (v), "=&r" (a) \ : "0" (err), "1" (v), "2" (a)); \ if (err) \ diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 07334632d3e2..21ad68ba22ba 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -93,6 +93,15 @@ static inline void l2x0_flush_line(unsigned long addr) } #endif +static void l2x0_cache_sync(void) +{ + unsigned long flags; + + spin_lock_irqsave(&l2x0_lock, flags); + cache_sync(); + spin_unlock_irqrestore(&l2x0_lock, flags); +} + static inline void l2x0_inv_all(void) { unsigned long flags; @@ -225,6 +234,7 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) outer_cache.inv_range = l2x0_inv_range; outer_cache.clean_range = l2x0_clean_range; outer_cache.flush_range = l2x0_flush_range; + outer_cache.sync = l2x0_cache_sync; printk(KERN_INFO "L2X0 cache controller enabled\n"); } diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index 9d89c67a1cc3..e46ecd847138 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -211,6 +211,9 @@ v6_dma_inv_range: mcrne p15, 0, r1, c7, c15, 1 @ clean & invalidate unified line #endif 1: +#ifdef CONFIG_SMP + str r0, [r0] @ write for ownership +#endif #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c6, 1 @ invalidate D line #else @@ -231,6 +234,9 @@ v6_dma_inv_range: v6_dma_clean_range: bic r0, r0, #D_CACHE_LINE_SIZE - 1 1: +#ifdef CONFIG_SMP + ldr r2, [r0] @ read for ownership +#endif #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c10, 1 @ clean D line #else @@ -251,6 +257,10 @@ v6_dma_clean_range: ENTRY(v6_dma_flush_range) bic r0, r0, #D_CACHE_LINE_SIZE - 1 1: +#ifdef CONFIG_SMP + ldr r2, [r0] @ read for ownership + str r2, [r0] @ write for ownership +#endif #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line #else @@ -273,7 +283,9 @@ ENTRY(v6_dma_map_area) add r1, r1, r0 teq r2, #DMA_FROM_DEVICE beq v6_dma_inv_range - b v6_dma_clean_range + teq r2, #DMA_TO_DEVICE + beq v6_dma_clean_range + b v6_dma_flush_range ENDPROC(v6_dma_map_area) /* @@ -283,9 +295,6 @@ ENDPROC(v6_dma_map_area) * - dir - DMA direction */ ENTRY(v6_dma_unmap_area) - add r1, r1, r0 - teq r2, #DMA_TO_DEVICE - bne v6_dma_inv_range mov pc, lr ENDPROC(v6_dma_unmap_area) diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index bcd64f265870..06a90dcfc60a 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -167,7 +167,11 @@ ENTRY(v7_coherent_user_range) cmp r0, r1 blo 1b mov r0, #0 +#ifdef CONFIG_SMP + mcr p15, 0, r0, c7, c1, 6 @ invalidate BTB Inner Shareable +#else mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB +#endif dsb isb mov pc, lr diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index 8bca4dea6dfa..f55fa1044f72 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -41,14 +41,7 @@ static void v6_copy_user_highpage_nonaliasing(struct page *to, kfrom = kmap_atomic(from, KM_USER0); kto = kmap_atomic(to, KM_USER1); copy_page(kto, kfrom); -#ifdef CONFIG_HIGHMEM - /* - * kmap_atomic() doesn't set the page virtual address, and - * kunmap_atomic() takes care of cache flushing already. - */ - if (page_address(to) != NULL) -#endif - __cpuc_flush_dcache_area(kto, PAGE_SIZE); + __cpuc_flush_dcache_area(kto, PAGE_SIZE); kunmap_atomic(kto, KM_USER1); kunmap_atomic(kfrom, KM_USER0); } diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 0da7eccf7749..13fa536d82e6 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -11,7 +11,7 @@ */ #include <linux/module.h> #include <linux/mm.h> -#include <linux/slab.h> +#include <linux/gfp.h> #include <linux/errno.h> #include <linux/list.h> #include <linux/init.h> @@ -464,6 +464,11 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset, vaddr += offset; op(vaddr, len, dir); kunmap_high(page); + } else if (cache_is_vipt()) { + pte_t saved_pte; + vaddr = kmap_high_l1_vipt(page, &saved_pte); + op(vaddr + offset, len, dir); + kunmap_high_l1_vipt(page, saved_pte); } } else { vaddr = page_address(page) + offset; diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index c9b97e9836a2..0d414c28eb2c 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -16,6 +16,7 @@ #include <linux/vmalloc.h> #include <linux/init.h> #include <linux/pagemap.h> +#include <linux/gfp.h> #include <asm/bugs.h> #include <asm/cacheflush.h> diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index e34f095e2090..c6844cb9b508 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -13,6 +13,7 @@ #include <asm/cacheflush.h> #include <asm/cachetype.h> +#include <asm/highmem.h> #include <asm/smp_plat.h> #include <asm/system.h> #include <asm/tlbflush.h> @@ -152,21 +153,25 @@ void copy_to_user_page(struct vm_area_struct *vma, struct page *page, void __flush_dcache_page(struct address_space *mapping, struct page *page) { - void *addr = page_address(page); - /* * Writeback any data associated with the kernel mapping of this * page. This ensures that data in the physical page is mutually * coherent with the kernels mapping. */ -#ifdef CONFIG_HIGHMEM - /* - * kmap_atomic() doesn't set the page virtual address, and - * kunmap_atomic() takes care of cache flushing already. - */ - if (addr) -#endif - __cpuc_flush_dcache_area(addr, PAGE_SIZE); + if (!PageHighMem(page)) { + __cpuc_flush_dcache_area(page_address(page), PAGE_SIZE); + } else { + void *addr = kmap_high_get(page); + if (addr) { + __cpuc_flush_dcache_area(addr, PAGE_SIZE); + kunmap_high(page); + } else if (cache_is_vipt()) { + pte_t saved_pte; + addr = kmap_high_l1_vipt(page, &saved_pte); + __cpuc_flush_dcache_area(addr, PAGE_SIZE); + kunmap_high_l1_vipt(page, saved_pte); + } + } /* * If this is a page cache page, and we have an aliasing VIPT cache, diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c index 2be1ec7c1b41..77b030f5ec09 100644 --- a/arch/arm/mm/highmem.c +++ b/arch/arm/mm/highmem.c @@ -79,7 +79,8 @@ void kunmap_atomic(void *kvaddr, enum km_type type) unsigned int idx = type + KM_TYPE_NR * smp_processor_id(); if (kvaddr >= (void *)FIXADDR_START) { - __cpuc_flush_dcache_area((void *)vaddr, PAGE_SIZE); + if (cache_is_vivt()) + __cpuc_flush_dcache_area((void *)vaddr, PAGE_SIZE); #ifdef CONFIG_DEBUG_HIGHMEM BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx)); set_pte_ext(TOP_PTE(vaddr), __pte(0), 0); @@ -124,3 +125,87 @@ struct page *kmap_atomic_to_page(const void *ptr) pte = TOP_PTE(vaddr); return pte_page(*pte); } + +#ifdef CONFIG_CPU_CACHE_VIPT + +#include <linux/percpu.h> + +/* + * The VIVT cache of a highmem page is always flushed before the page + * is unmapped. Hence unmapped highmem pages need no cache maintenance + * in that case. + * + * However unmapped pages may still be cached with a VIPT cache, and + * it is not possible to perform cache maintenance on them using physical + * addresses unfortunately. So we have no choice but to set up a temporary + * virtual mapping for that purpose. + * + * Yet this VIPT cache maintenance may be triggered from DMA support + * functions which are possibly called from interrupt context. As we don't + * want to keep interrupt disabled all the time when such maintenance is + * taking place, we therefore allow for some reentrancy by preserving and + * restoring the previous fixmap entry before the interrupted context is + * resumed. If the reentrancy depth is 0 then there is no need to restore + * the previous fixmap, and leaving the current one in place allow it to + * be reused the next time without a TLB flush (common with DMA). + */ + +static DEFINE_PER_CPU(int, kmap_high_l1_vipt_depth); + +void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte) +{ + unsigned int idx, cpu = smp_processor_id(); + int *depth = &per_cpu(kmap_high_l1_vipt_depth, cpu); + unsigned long vaddr, flags; + pte_t pte, *ptep; + + idx = KM_L1_CACHE + KM_TYPE_NR * cpu; + vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); + ptep = TOP_PTE(vaddr); + pte = mk_pte(page, kmap_prot); + + if (!in_interrupt()) + preempt_disable(); + + raw_local_irq_save(flags); + (*depth)++; + if (pte_val(*ptep) == pte_val(pte)) { + *saved_pte = pte; + } else { + *saved_pte = *ptep; + set_pte_ext(ptep, pte, 0); + local_flush_tlb_kernel_page(vaddr); + } + raw_local_irq_restore(flags); + + return (void *)vaddr; +} + +void kunmap_high_l1_vipt(struct page *page, pte_t saved_pte) +{ + unsigned int idx, cpu = smp_processor_id(); + int *depth = &per_cpu(kmap_high_l1_vipt_depth, cpu); + unsigned long vaddr, flags; + pte_t pte, *ptep; + + idx = KM_L1_CACHE + KM_TYPE_NR * cpu; + vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); + ptep = TOP_PTE(vaddr); + pte = mk_pte(page, kmap_prot); + + BUG_ON(pte_val(*ptep) != pte_val(pte)); + BUG_ON(*depth <= 0); + + raw_local_irq_save(flags); + (*depth)--; + if (*depth != 0 && pte_val(pte) != pte_val(saved_pte)) { + set_pte_ext(ptep, saved_pte, 0); + local_flush_tlb_kernel_page(vaddr); + } + raw_local_irq_restore(flags); + + if (!in_interrupt()) + preempt_enable(); +} + +#endif /* CONFIG_CPU_CACHE_VIPT */ diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 7829cb5425f5..0ed29bfeba1c 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -17,6 +17,7 @@ #include <linux/initrd.h> #include <linux/sort.h> #include <linux/highmem.h> +#include <linux/gfp.h> #include <asm/mach-types.h> #include <asm/sections.h> @@ -85,9 +86,6 @@ void show_mem(void) printk("Mem-info:\n"); show_free_areas(); for_each_online_node(node) { - pg_data_t *n = NODE_DATA(node); - struct page *map = pgdat_page_nr(n, 0) - n->node_start_pfn; - for_each_nodebank (i,mi,node) { struct membank *bank = &mi->bank[i]; unsigned int pfn1, pfn2; @@ -96,8 +94,8 @@ void show_mem(void) pfn1 = bank_pfn_start(bank); pfn2 = bank_pfn_end(bank); - page = map + pfn1; - end = map + pfn2; + page = pfn_to_page(pfn1); + end = pfn_to_page(pfn2 - 1) + 1; do { total++; @@ -602,9 +600,6 @@ void __init mem_init(void) reserved_pages = free_pages = 0; for_each_online_node(node) { - pg_data_t *n = NODE_DATA(node); - struct page *map = pgdat_page_nr(n, 0) - n->node_start_pfn; - for_each_nodebank(i, &meminfo, node) { struct membank *bank = &meminfo.bank[i]; unsigned int pfn1, pfn2; @@ -613,8 +608,8 @@ void __init mem_init(void) pfn1 = bank_pfn_start(bank); pfn2 = bank_pfn_end(bank); - page = map + pfn1; - end = map + pfn2; + page = pfn_to_page(pfn1); + end = pfn_to_page(pfn2 - 1) + 1; do { if (PageReserved(page)) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 9d4da6ac28eb..241c24a1c18f 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -420,6 +420,10 @@ static void __init build_mem_type_table(void) user_pgprot |= L_PTE_SHARED; kern_pgprot |= L_PTE_SHARED; vecs_pgprot |= L_PTE_SHARED; + mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_S; + mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED; + mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S; + mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED; mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S; #endif @@ -1050,10 +1054,12 @@ void setup_mm_for_reboot(char mode) pgd_t *pgd; int i; - if (current->mm && current->mm->pgd) - pgd = current->mm->pgd; - else - pgd = init_mm.pgd; + /* + * We need to access to user-mode page tables here. For kernel threads + * we don't have any user-mode mappings so we use the context that we + * "borrowed". + */ + pgd = current->active_mm->pgd; base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT; if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 9bfeb6b9509a..33b327379f07 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -65,6 +65,15 @@ void flush_dcache_page(struct page *page) } EXPORT_SYMBOL(flush_dcache_page); +void copy_to_user_page(struct vm_area_struct *vma, struct page *page, + unsigned long uaddr, void *dst, const void *src, + unsigned long len) +{ + memcpy(dst, src, len); + if (vma->vm_flags & VM_EXEC) + __cpuc_coherent_user_range(uaddr, uaddr + len); +} + void __iomem *__arm_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size, unsigned int mtype) { @@ -87,8 +96,8 @@ void __iomem *__arm_ioremap(unsigned long phys_addr, size_t size, } EXPORT_SYMBOL(__arm_ioremap); -void __iomem *__arm_ioremap(unsigned long phys_addr, size_t size, - unsigned int mtype, void *caller) +void __iomem *__arm_ioremap_caller(unsigned long phys_addr, size_t size, + unsigned int mtype, void *caller) { return __arm_ioremap(phys_addr, size, mtype); } diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index 2690146161ba..be5f58e153bf 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ #include <linux/mm.h> +#include <linux/gfp.h> #include <linux/highmem.h> #include <asm/pgalloc.h> diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index ee7700242c19..5c47760c2064 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -45,7 +45,7 @@ ENTRY(cpu_sa1100_proc_init) mcr p15, 0, r0, c9, c0, 5 @ Allow read-buffer operations from userland mov pc, lr - .previous + .section .text /* * cpu_sa1100_proc_fin() diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index 0cb1848bd876..f3f288a9546d 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -50,7 +50,11 @@ ENTRY(v7wbi_flush_user_tlb_range) cmp r0, r1 blo 1b mov ip, #0 +#ifdef CONFIG_SMP + mcr p15, 0, ip, c7, c1, 6 @ flush BTAC/BTB Inner Shareable +#else mcr p15, 0, ip, c7, c5, 6 @ flush BTAC/BTB +#endif dsb mov pc, lr ENDPROC(v7wbi_flush_user_tlb_range) @@ -79,7 +83,11 @@ ENTRY(v7wbi_flush_kern_tlb_range) cmp r0, r1 blo 1b mov r2, #0 +#ifdef CONFIG_SMP + mcr p15, 0, r2, c7, c1, 6 @ flush BTAC/BTB Inner Shareable +#else mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB +#endif dsb isb mov pc, lr diff --git a/arch/arm/nwfpe/entry.S b/arch/arm/nwfpe/entry.S index 48bca0db4607..cafa18354339 100644 --- a/arch/arm/nwfpe/entry.S +++ b/arch/arm/nwfpe/entry.S @@ -111,12 +111,12 @@ next: @ to fault. Emit the appropriate exception gunk to fix things up. @ ??? For some reason, faults can happen at .Lx2 even with a @ plain LDR instruction. Weird, but it seems harmless. - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 2 .Lfix: mov pc, r9 @ let the user eat segfaults - .previous + .popsection - .section __ex_table,"a" + .pushsection __ex_table,"a" .align 3 .long .Lx1, .Lfix - .previous + .popsection diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c index d983cd6c788c..0c2cc5cd4d83 100644 --- a/arch/arm/plat-mxc/audmux-v2.c +++ b/arch/arm/plat-mxc/audmux-v2.c @@ -24,6 +24,7 @@ #include <linux/io.h> #include <linux/clk.h> #include <linux/debugfs.h> +#include <linux/slab.h> #include <mach/audmux.h> #include <mach/hardware.h> diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h index 2bbd6ed17f50..da92933a233b 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h @@ -8,8 +8,8 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__ -#define __ASM_ARCH_MXC_BOARD_MX31PDK_H__ +#ifndef __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ +#define __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ /* Definitions for components on the Debug board */ @@ -56,4 +56,4 @@ #define MXC_MAX_EXP_IO_LINES 16 -#endif /* __ASM_ARCH_MXC_BOARD_MX31PDK_H__ */ +#endif /* __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h index 07be8ad7ec37..7c4870bd5a21 100644 --- a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h +++ b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h @@ -31,7 +31,13 @@ #define DMA_MODE_WRITE 1 #define DMA_MODE_MASK 1 -#define DMA_BASE IO_ADDRESS(DMA_BASE_ADDR) +#define MX1_DMA_REG(offset) MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR + (offset)) + +/* DMA Interrupt Mask Register */ +#define MX1_DMA_DIMR MX1_DMA_REG(0x08) + +/* Channel Control Register */ +#define MX1_DMA_CCR(x) MX1_DMA_REG(0x8c + ((x) << 6)) #define IMX_DMA_MEMSIZE_32 (0 << 4) #define IMX_DMA_MEMSIZE_8 (1 << 4) diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h index 771532b6b4a6..5aad344d5651 100644 --- a/arch/arm/plat-mxc/include/mach/mx51.h +++ b/arch/arm/plat-mxc/include/mach/mx51.h @@ -14,7 +14,7 @@ * FB100000 70000000 1M SPBA 0 * FB000000 73F00000 1M AIPS 1 * FB200000 83F00000 1M AIPS 2 - * FA100000 8FFFC000 16K TZIC (interrupt controller) + * 8FFFC000 16K TZIC (interrupt controller) * 90000000 256M CSD0 SDRAM/DDR * A0000000 256M CSD1 SDRAM/DDR * B0000000 128M CS0 Flash @@ -23,11 +23,17 @@ * C8000000 64M CS3 Flash * CC000000 32M CS4 SRAM * CE000000 32M CS5 SRAM - * F9000000 CFFF0000 64K NFC (NAND Flash AXI) + * CFFF0000 64K NFC (NAND Flash AXI) * */ /* + * IROM + */ +#define MX51_IROM_BASE_ADDR 0x0 +#define MX51_IROM_SIZE SZ_64K + +/* * IRAM */ #define MX51_IRAM_BASE_ADDR 0x1FFE0000 /* internal ram */ @@ -40,7 +46,6 @@ * NFC */ #define MX51_NFC_AXI_BASE_ADDR 0xCFFF0000 /* NAND flash AXI */ -#define MX51_NFC_AXI_BASE_ADDR_VIRT 0xF9000000 #define MX51_NFC_AXI_SIZE SZ_64K /* @@ -49,9 +54,8 @@ #define MX51_GPU_BASE_ADDR 0x20000000 #define MX51_GPU2D_BASE_ADDR 0xD0000000 -#define MX51_TZIC_BASE_ADDR 0x8FFFC000 -#define MX51_TZIC_BASE_ADDR_VIRT 0xFA100000 -#define MX51_TZIC_SIZE SZ_16K +#define MX51_TZIC_BASE_ADDR_TO1 0x8FFFC000 +#define MX51_TZIC_BASE_ADDR 0xE0000000 #define MX51_DEBUG_BASE_ADDR 0x60000000 #define MX51_DEBUG_BASE_ADDR_VIRT 0xFA200000 @@ -232,12 +236,10 @@ #define MX51_IO_ADDRESS(x) \ (void __iomem *) \ (MX51_IS_MODULE(x, IRAM) ? MX51_IRAM_IO_ADDRESS(x) : \ - MX51_IS_MODULE(x, TZIC) ? MX51_TZIC_IO_ADDRESS(x) : \ MX51_IS_MODULE(x, DEBUG) ? MX51_DEBUG_IO_ADDRESS(x) : \ MX51_IS_MODULE(x, SPBA0) ? MX51_SPBA0_IO_ADDRESS(x) : \ MX51_IS_MODULE(x, AIPS1) ? MX51_AIPS1_IO_ADDRESS(x) : \ - MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) : \ - MX51_IS_MODULE(x, NFC_AXI) ? MX51_NFC_AXI_IO_ADDRESS(x) : \ + MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) : \ 0xDEADBEEF) /* @@ -246,9 +248,6 @@ #define MX51_IRAM_IO_ADDRESS(x) \ (((x) - MX51_IRAM_BASE_ADDR) + MX51_IRAM_BASE_ADDR_VIRT) -#define MX51_TZIC_IO_ADDRESS(x) \ - (((x) - MX51_TZIC_BASE_ADDR) + MX51_TZIC_BASE_ADDR_VIRT) - #define MX51_DEBUG_IO_ADDRESS(x) \ (((x) - MX51_DEBUG_BASE_ADDR) + MX51_DEBUG_BASE_ADDR_VIRT) @@ -261,9 +260,6 @@ #define MX51_AIPS2_IO_ADDRESS(x) \ (((x) - MX51_AIPS2_BASE_ADDR) + MX51_AIPS2_BASE_ADDR_VIRT) -#define MX51_NFC_AXI_IO_ADDRESS(x) \ - (((x) - MX51_NFC_AXI_BASE_ADDR) + MX51_NFC_AXI_BASE_ADDR_VIRT) - #define MX51_IS_MEM_DEVICE_NONSHARED(x) 0 /* @@ -443,12 +439,7 @@ #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) -extern unsigned int system_rev; - -static inline unsigned int mx51_revision(void) -{ - return system_rev; -} +extern int mx51_revision(void); #endif #endif /* __ASM_ARCH_MXC_MX51_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index 52e476a150ca..b6d3d0fddc48 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -66,6 +66,7 @@ static inline void flush(void) #define MX2X_UART1_BASE_ADDR 0x1000a000 #define MX3X_UART1_BASE_ADDR 0x43F90000 #define MX3X_UART2_BASE_ADDR 0x43F94000 +#define MX51_UART1_BASE_ADDR 0x73fbc000 static __inline__ void __arch_decomp_setup(unsigned long arch_id) { @@ -101,6 +102,9 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) case MACH_TYPE_MAGX_ZN5: uart_base = MX3X_UART2_BASE_ADDR; break; + case MACH_TYPE_MX51_BABBAGE: + uart_base = MX51_UART1_BASE_ADDR; + break; default: break; } diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c index 4ff6dfe04283..c36f2630ed93 100644 --- a/arch/arm/plat-mxc/pwm.c +++ b/arch/arm/plat-mxc/pwm.c @@ -11,6 +11,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/platform_device.h> +#include <linux/slab.h> #include <linux/err.h> #include <linux/clk.h> #include <linux/io.h> diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 088c1a03b946..f12f0e39ddf2 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -44,9 +44,6 @@ #define NO_LENGTH_CHECK 0xffffffff -unsigned char omap_bootloader_tag[512]; -int omap_bootloader_tag_len; - struct omap_board_config_kernel *omap_board_config; int omap_board_config_size; @@ -100,10 +97,17 @@ EXPORT_SYMBOL(omap_get_var_config); #include <linux/clocksource.h> +/* + * offset_32k holds the init time counter value. It is then subtracted + * from every counter read to achieve a counter that counts time from the + * kernel boot (needed for sched_clock()). + */ +static u32 offset_32k __read_mostly; + #ifdef CONFIG_ARCH_OMAP16XX static cycle_t omap16xx_32k_read(struct clocksource *cs) { - return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED); + return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED) - offset_32k; } #else #define omap16xx_32k_read NULL @@ -112,7 +116,7 @@ static cycle_t omap16xx_32k_read(struct clocksource *cs) #ifdef CONFIG_ARCH_OMAP2420 static cycle_t omap2420_32k_read(struct clocksource *cs) { - return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10); + return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10) - offset_32k; } #else #define omap2420_32k_read NULL @@ -121,7 +125,7 @@ static cycle_t omap2420_32k_read(struct clocksource *cs) #ifdef CONFIG_ARCH_OMAP2430 static cycle_t omap2430_32k_read(struct clocksource *cs) { - return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10); + return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10) - offset_32k; } #else #define omap2430_32k_read NULL @@ -130,7 +134,7 @@ static cycle_t omap2430_32k_read(struct clocksource *cs) #ifdef CONFIG_ARCH_OMAP3 static cycle_t omap34xx_32k_read(struct clocksource *cs) { - return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10); + return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10) - offset_32k; } #else #define omap34xx_32k_read NULL @@ -139,7 +143,7 @@ static cycle_t omap34xx_32k_read(struct clocksource *cs) #ifdef CONFIG_ARCH_OMAP4 static cycle_t omap44xx_32k_read(struct clocksource *cs) { - return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10); + return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10) - offset_32k; } #else #define omap44xx_32k_read NULL @@ -227,6 +231,8 @@ static int __init omap_init_clocksource_32k(void) clocksource_32k.mult = clocksource_hz2mult(32768, clocksource_32k.shift); + offset_32k = clocksource_32k.read(&clocksource_32k); + if (clocksource_register(&clocksource_32k)) printk(err, clocksource_32k.name); } diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 4a4cd8774aaa..95677d17cd1c 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/slab.h> #include <mach/hardware.h> #include <asm/mach-types.h> diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 2ab224c8e16c..1d959965ff52 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -29,6 +29,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/io.h> +#include <linux/slab.h> #include <asm/system.h> #include <mach/hardware.h> @@ -936,6 +937,15 @@ void omap_start_dma(int lch) { u32 l; + /* + * The CPC/CDAC register needs to be initialized to zero + * before starting dma transfer. + */ + if (cpu_is_omap15xx()) + dma_write(0, CPC(lch)); + else + dma_write(0, CDAC(lch)); + if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { int next_lch, cur_lch; char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT]; diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 76a347b3ce07..45a225d09125 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -798,7 +798,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_MPUIO: reg += OMAP_MPUIO_GPIO_INT_EDGE; l = __raw_readl(reg); - if (trigger & IRQ_TYPE_EDGE_BOTH) + if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) bank->toggle_mask |= 1 << gpio; if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; @@ -812,7 +812,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_GPIO_1510: reg += OMAP1510_GPIO_INT_CONTROL; l = __raw_readl(reg); - if (trigger & IRQ_TYPE_EDGE_BOTH) + if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) bank->toggle_mask |= 1 << gpio; if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; @@ -846,7 +846,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_GPIO_7XX: reg += OMAP7XX_GPIO_INT_CONTROL; l = __raw_readl(reg); - if (trigger & IRQ_TYPE_EDGE_BOTH) + if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) bank->toggle_mask |= 1 << gpio; if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index b65088a869e9..401701977dbb 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -345,8 +345,6 @@ #define INT_34XX_MMC3_IRQ 94 #define INT_34XX_GPT12_IRQ 95 -#define INT_34XX_BENCH_MPU_EMUL 3 - #define INT_35XX_HECC0_IRQ 24 #define INT_35XX_HECC1_IRQ 28 #define INT_35XX_EMAC_C0_RXTHRESH_IRQ 67 diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index 39748354ce45..7de903d7c1ce 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -59,7 +59,7 @@ #define OMAP44XX_MCBSP1_BASE 0x49022000 #define OMAP44XX_MCBSP2_BASE 0x49024000 #define OMAP44XX_MCBSP3_BASE 0x49026000 -#define OMAP44XX_MCBSP4_BASE 0x48074000 +#define OMAP44XX_MCBSP4_BASE 0x48096000 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h index 6ba88d2630d9..f8efd5466b1d 100644 --- a/arch/arm/plat-omap/include/plat/nand.h +++ b/arch/arm/plat-omap/include/plat/nand.h @@ -29,4 +29,11 @@ struct omap_nand_platform_data { /* size (4 KiB) for IO mapping */ #define NAND_IO_SIZE SZ_4K +#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) extern int gpmc_nand_init(struct omap_nand_platform_data *d); +#else +static inline int gpmc_nand_init(struct omap_nand_platform_data *d) +{ + return 0; +} +#endif diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h index 2302474a3748..b3ef1a7f53cc 100644 --- a/arch/arm/plat-omap/include/plat/omap44xx.h +++ b/arch/arm/plat-omap/include/plat/omap44xx.h @@ -32,7 +32,7 @@ #define OMAP4430_PRM_BASE 0x4a306000 #define OMAP44XX_GPMC_BASE 0x50000000 #define OMAP443X_SCM_BASE 0x4a002000 -#define OMAP443X_CTRL_BASE OMAP443X_SCM_BASE +#define OMAP443X_CTRL_BASE 0x4a100000 #define OMAP44XX_IC_BASE 0x48200000 #define OMAP44XX_IVA_INTC_BASE 0x40000000 #define IRQ_SIR_IRQ 0x0040 diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 440b4164f2f6..36d6ea56ab51 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -294,8 +294,8 @@ struct omap_hwmod_class_sysconfig { u16 rev_offs; u16 sysc_offs; u16 syss_offs; + u16 sysc_flags; u8 idlemodes; - u8 sysc_flags; u8 clockact; struct omap_hwmod_sysc_fields *sysc_fields; }; diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 568578db93b6..876ca8d5e927 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -46,7 +46,7 @@ struct ehci_hcd_omap_platform_data { struct omap_musb_board_data { u8 interface_type; u8 mode; - u8 power; + u16 power; }; enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI}; diff --git a/arch/arm/plat-omap/iommu-debug.c b/arch/arm/plat-omap/iommu-debug.c index afd1c27cff7c..e6c0d536899c 100644 --- a/arch/arm/plat-omap/iommu-debug.c +++ b/arch/arm/plat-omap/iommu-debug.c @@ -13,6 +13,7 @@ #include <linux/err.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/slab.h> #include <linux/uaccess.h> #include <linux/platform_device.h> #include <linux/debugfs.h> diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index 905ed832df56..0e137663349c 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -13,6 +13,7 @@ #include <linux/err.h> #include <linux/module.h> +#include <linux/slab.h> #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/clk.h> diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c index 936aef1971cd..65c6d1ff7237 100644 --- a/arch/arm/plat-omap/iovmm.c +++ b/arch/arm/plat-omap/iovmm.c @@ -11,6 +11,7 @@ */ #include <linux/err.h> +#include <linux/slab.h> #include <linux/vmalloc.h> #include <linux/device.h> #include <linux/scatterlist.h> diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index 4229cec53140..08a2df766289 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -25,6 +25,7 @@ #include <linux/interrupt.h> #include <linux/device.h> #include <linux/delay.h> +#include <linux/slab.h> #include <plat/mailbox.h> diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 52dfcc81511e..e1d0440fd4a8 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -23,6 +23,7 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/io.h> +#include <linux/slab.h> #include <plat/dma.h> #include <plat/mcbsp.h> diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index 590435894848..0f5197479513 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -79,6 +79,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> +#include <linux/slab.h> #include <linux/err.h> #include <linux/io.h> diff --git a/arch/arm/plat-pxa/dma.c b/arch/arm/plat-pxa/dma.c index 2975798d411f..2d3c19d7c7b1 100644 --- a/arch/arm/plat-pxa/dma.c +++ b/arch/arm/plat-pxa/dma.c @@ -14,6 +14,7 @@ #include <linux/module.h> #include <linux/init.h> +#include <linux/slab.h> #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/errno.h> @@ -244,7 +245,7 @@ static void pxa_dma_init_debugfs(void) dbgfs_chan = kmalloc(sizeof(*dbgfs_state) * num_dma_channels, GFP_KERNEL); - if (!dbgfs_state) + if (!dbgfs_chan) goto err_alloc; chandir = debugfs_create_dir("channels", dbgfs_root); diff --git a/arch/arm/plat-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c index 51dc5c8106c0..0732c6c8d511 100644 --- a/arch/arm/plat-pxa/pwm.c +++ b/arch/arm/plat-pxa/pwm.c @@ -14,6 +14,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/platform_device.h> +#include <linux/slab.h> #include <linux/err.h> #include <linux/clk.h> #include <linux/io.h> diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c index 2d42efb9f4e9..1ecc15bfe9d4 100644 --- a/arch/arm/plat-s3c24xx/cpu-freq.c +++ b/arch/arm/plat-s3c24xx/cpu-freq.c @@ -23,6 +23,7 @@ #include <linux/sysdev.h> #include <linux/kobject.h> #include <linux/sysfs.h> +#include <linux/slab.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index 8c6de1c9968f..9265f09bfa58 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -20,6 +20,7 @@ #include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/slab.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c index 963fb0b4379e..b1908e56da1b 100644 --- a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c +++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c @@ -17,6 +17,7 @@ #include <linux/cpufreq.h> #include <linux/seq_file.h> #include <linux/io.h> +#include <linux/slab.h> #include <mach/map.h> #include <mach/regs-mem.h> diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c index 24993dce10b5..0b46d3895d62 100644 --- a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c +++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c @@ -21,6 +21,7 @@ #include <linux/delay.h> #include <linux/clk.h> #include <linux/err.h> +#include <linux/slab.h> #include <linux/amba/pl093.h> diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index 0b5833b9ac5b..210030d5cfe1 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <linux/sched.h> #include <linux/list.h> +#include <linux/slab.h> #include <linux/err.h> #include <linux/clk.h> #include <linux/interrupt.h> diff --git a/arch/arm/plat-samsung/dev-fb.c b/arch/arm/plat-samsung/dev-fb.c index a90198fc4b0f..002a15f313f3 100644 --- a/arch/arm/plat-samsung/dev-fb.c +++ b/arch/arm/plat-samsung/dev-fb.c @@ -15,6 +15,7 @@ #include <linux/string.h> #include <linux/platform_device.h> #include <linux/fb.h> +#include <linux/gfp.h> #include <mach/irqs.h> #include <mach/map.h> diff --git a/arch/arm/plat-samsung/dev-i2c0.c b/arch/arm/plat-samsung/dev-i2c0.c index 4c761529b949..3a601c16f03c 100644 --- a/arch/arm/plat-samsung/dev-i2c0.c +++ b/arch/arm/plat-samsung/dev-i2c0.c @@ -11,6 +11,7 @@ * published by the Free Software Foundation. */ +#include <linux/gfp.h> #include <linux/kernel.h> #include <linux/string.h> #include <linux/platform_device.h> diff --git a/arch/arm/plat-samsung/dev-i2c1.c b/arch/arm/plat-samsung/dev-i2c1.c index d44f79110506..858ee2a0414c 100644 --- a/arch/arm/plat-samsung/dev-i2c1.c +++ b/arch/arm/plat-samsung/dev-i2c1.c @@ -11,6 +11,7 @@ * published by the Free Software Foundation. */ +#include <linux/gfp.h> #include <linux/kernel.h> #include <linux/string.h> #include <linux/platform_device.h> diff --git a/arch/arm/plat-samsung/dev-nand.c b/arch/arm/plat-samsung/dev-nand.c index a52fb6cf618f..3a7b8891ba4f 100644 --- a/arch/arm/plat-samsung/dev-nand.c +++ b/arch/arm/plat-samsung/dev-nand.c @@ -6,6 +6,7 @@ * published by the Free Software Foundation. */ +#include <linux/gfp.h> #include <linux/kernel.h> #include <linux/platform_device.h> diff --git a/arch/arm/plat-samsung/dev-usb.c b/arch/arm/plat-samsung/dev-usb.c index 88165657fa53..0e0a3bf5c982 100644 --- a/arch/arm/plat-samsung/dev-usb.c +++ b/arch/arm/plat-samsung/dev-usb.c @@ -11,6 +11,7 @@ * published by the Free Software Foundation. */ +#include <linux/gfp.h> #include <linux/kernel.h> #include <linux/string.h> #include <linux/platform_device.h> diff --git a/arch/arm/plat-samsung/pm-check.c b/arch/arm/plat-samsung/pm-check.c index 0b5bb774192a..e4baf76f374a 100644 --- a/arch/arm/plat-samsung/pm-check.c +++ b/arch/arm/plat-samsung/pm-check.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/crc32.h> #include <linux/ioport.h> +#include <linux/slab.h> #include <plat/pm.h> diff --git a/arch/arm/plat-samsung/pwm.c b/arch/arm/plat-samsung/pwm.c index f2d11390d01c..2eeb49fa056d 100644 --- a/arch/arm/plat-samsung/pwm.c +++ b/arch/arm/plat-samsung/pwm.c @@ -14,6 +14,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/platform_device.h> +#include <linux/slab.h> #include <linux/err.h> #include <linux/clk.h> #include <linux/io.h> diff --git a/arch/arm/plat-stmp3xxx/dma.c b/arch/arm/plat-stmp3xxx/dma.c index ef88f25fb870..b4dcf8c0477d 100644 --- a/arch/arm/plat-stmp3xxx/dma.c +++ b/arch/arm/plat-stmp3xxx/dma.c @@ -15,6 +15,7 @@ * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ +#include <linux/gfp.h> #include <linux/kernel.h> #include <linux/device.h> #include <linux/dmapool.h> diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 31c2f4c30a95..8f10d24ae625 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Sat Feb 20 14:16:15 2010 +# Last update: Sat May 1 10:36:42 2010 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -2663,7 +2663,7 @@ reb01 MACH_REB01 REB01 2675 aquila MACH_AQUILA AQUILA 2676 spark_sls_hw2 MACH_SPARK_SLS_HW2 SPARK_SLS_HW2 2677 sheeva_esata MACH_ESATA_SHEEVAPLUG ESATA_SHEEVAPLUG 2678 -surf7x30 MACH_SURF7X30 SURF7X30 2679 +msm7x30_surf MACH_MSM7X30_SURF MSM7X30_SURF 2679 micro2440 MACH_MICRO2440 MICRO2440 2680 am2440 MACH_AM2440 AM2440 2681 tq2440 MACH_TQ2440 TQ2440 2682 @@ -2678,3 +2678,129 @@ vc088x MACH_VC088X VC088X 2690 mioa702 MACH_MIOA702 MIOA702 2691 hpmin MACH_HPMIN HPMIN 2692 ak880xak MACH_AK880XAK AK880XAK 2693 +arm926tomap850 MACH_ARM926TOMAP850 ARM926TOMAP850 2694 +lkevm MACH_LKEVM LKEVM 2695 +mw6410 MACH_MW6410 MW6410 2696 +terastation_wxl MACH_TERASTATION_WXL TERASTATION_WXL 2697 +cpu8000e MACH_CPU8000E CPU8000E 2698 +catania MACH_CATANIA CATANIA 2699 +tokyo MACH_TOKYO TOKYO 2700 +msm7201a_surf MACH_MSM7201A_SURF MSM7201A_SURF 2701 +msm7201a_ffa MACH_MSM7201A_FFA MSM7201A_FFA 2702 +msm7x25_surf MACH_MSM7X25_SURF MSM7X25_SURF 2703 +msm7x25_ffa MACH_MSM7X25_FFA MSM7X25_FFA 2704 +msm7x27_surf MACH_MSM7X27_SURF MSM7X27_SURF 2705 +msm7x27_ffa MACH_MSM7X27_FFA MSM7X27_FFA 2706 +msm7x30_ffa MACH_MSM7X30_FFA MSM7X30_FFA 2707 +qsd8x50_surf MACH_QSD8X50_SURF QSD8X50_SURF 2708 +qsd8x50_comet MACH_QSD8X50_COMET QSD8X50_COMET 2709 +qsd8x50_ffa MACH_QSD8X50_FFA QSD8X50_FFA 2710 +qsd8x50a_surf MACH_QSD8X50A_SURF QSD8X50A_SURF 2711 +qsd8x50a_ffa MACH_QSD8X50A_FFA QSD8X50A_FFA 2712 +adx_xgcp10 MACH_ADX_XGCP10 ADX_XGCP10 2713 +mcgwumts2a MACH_MCGWUMTS2A MCGWUMTS2A 2714 +mobikt MACH_MOBIKT MOBIKT 2715 +mx53_evk MACH_MX53_EVK MX53_EVK 2716 +igep0030 MACH_IGEP0030 IGEP0030 2717 +axell_h40_h50_ctrl MACH_AXELL_H40_H50_CTRL AXELL_H40_H50_CTRL 2718 +dtcommod MACH_DTCOMMOD DTCOMMOD 2719 +gould MACH_GOULD GOULD 2720 +siberia MACH_SIBERIA SIBERIA 2721 +sbc3530 MACH_SBC3530 SBC3530 2722 +qarm MACH_QARM QARM 2723 +mips MACH_MIPS MIPS 2724 +mx27grb MACH_MX27GRB MX27GRB 2725 +sbc8100 MACH_SBC8100 SBC8100 2726 +saarb MACH_SAARB SAARB 2727 +omap3mini MACH_OMAP3MINI OMAP3MINI 2728 +cnmbook7se MACH_CNMBOOK7SE CNMBOOK7SE 2729 +catan MACH_CATAN CATAN 2730 +harmony MACH_HARMONY HARMONY 2731 +tonga MACH_TONGA TONGA 2732 +cybook_orizon MACH_CYBOOK_ORIZON CYBOOK_ORIZON 2733 +htcrhodiumcdma MACH_HTCRHODIUMCDMA HTCRHODIUMCDMA 2734 +epc_g45 MACH_EPC_G45 EPC_G45 2735 +epc_lpc3250 MACH_EPC_LPC3250 EPC_LPC3250 2736 +mxc91341evb MACH_MXC91341EVB MXC91341EVB 2737 +rtw1000 MACH_RTW1000 RTW1000 2738 +bobcat MACH_BOBCAT BOBCAT 2739 +trizeps6 MACH_TRIZEPS6 TRIZEPS6 2740 +msm7x30_fluid MACH_MSM7X30_FLUID MSM7X30_FLUID 2741 +nedap9263 MACH_NEDAP9263 NEDAP9263 2742 +netgear_ms2110 MACH_NETGEAR_MS2110 NETGEAR_MS2110 2743 +bmx MACH_BMX BMX 2744 +netstream MACH_NETSTREAM NETSTREAM 2745 +vpnext_rcu MACH_VPNEXT_RCU VPNEXT_RCU 2746 +vpnext_mpu MACH_VPNEXT_MPU VPNEXT_MPU 2747 +bcmring_tablet_v1 MACH_BCMRING_TABLET_V1 BCMRING_TABLET_V1 2748 +sgarm10 MACH_SGARM10 SGARM10 2749 +cm_t3517 MACH_CM_T3517 CM_T3517 2750 +omap3_cps MACH_OMAP3_CPS OMAP3_CPS 2751 +axar1500_receiver MACH_AXAR1500_RECEIVER AXAR1500_RECEIVER 2752 +wbd222 MACH_WBD222 WBD222 2753 +mt65xx MACH_MT65XX MT65XX 2754 +msm8x60_surf MACH_MSM8X60_SURF MSM8X60_SURF 2755 +msm8x60_sim MACH_MSM8X60_SIM MSM8X60_SIM 2756 +vmc300 MACH_VMC300 VMC300 2757 +tcc8000_sdk MACH_TCC8000_SDK TCC8000_SDK 2758 +nanos MACH_NANOS NANOS 2759 +stamp9g10 MACH_STAMP9G10 STAMP9G10 2760 +stamp9g45 MACH_STAMP9G45 STAMP9G45 2761 +h6053 MACH_H6053 H6053 2762 +smint01 MACH_SMINT01 SMINT01 2763 +prtlvt2 MACH_PRTLVT2 PRTLVT2 2764 +ap420 MACH_AP420 AP420 2765 +htcshift MACH_HTCSHIFT HTCSHIFT 2766 +davinci_dm365_fc MACH_DAVINCI_DM365_FC DAVINCI_DM365_FC 2767 +msm8x55_surf MACH_MSM8X55_SURF MSM8X55_SURF 2768 +msm8x55_ffa MACH_MSM8X55_FFA MSM8X55_FFA 2769 +esl_vamana MACH_ESL_VAMANA ESL_VAMANA 2770 +sbc35 MACH_SBC35 SBC35 2771 +mpx6446 MACH_MPX6446 MPX6446 2772 +oreo_controller MACH_OREO_CONTROLLER OREO_CONTROLLER 2773 +kopin_models MACH_KOPIN_MODELS KOPIN_MODELS 2774 +ttc_vision2 MACH_TTC_VISION2 TTC_VISION2 2775 +cns3420vb MACH_CNS3420VB CNS3420VB 2776 +lpc2 MACH_LPC2 LPC2 2777 +olympus MACH_OLYMPUS OLYMPUS 2778 +vortex MACH_VORTEX VORTEX 2779 +s5pc200 MACH_S5PC200 S5PC200 2780 +ecucore_9263 MACH_ECUCORE_9263 ECUCORE_9263 2781 +smdkc200 MACH_SMDKC200 SMDKC200 2782 +emsiso_sx27 MACH_EMSISO_SX27 EMSISO_SX27 2783 +apx_som9g45_ek MACH_APX_SOM9G45_EK APX_SOM9G45_EK 2784 +songshan MACH_SONGSHAN SONGSHAN 2785 +tianshan MACH_TIANSHAN TIANSHAN 2786 +vpx500 MACH_VPX500 VPX500 2787 +am3517sam MACH_AM3517SAM AM3517SAM 2788 +skat91_sim508 MACH_SKAT91_SIM508 SKAT91_SIM508 2789 +skat91_s3e MACH_SKAT91_S3E SKAT91_S3E 2790 +omap4_panda MACH_OMAP4_PANDA OMAP4_PANDA 2791 +df7220 MACH_DF7220 DF7220 2792 +nemini MACH_NEMINI NEMINI 2793 +t8200 MACH_T8200 T8200 2794 +apf51 MACH_APF51 APF51 2795 +dr_rc_unit MACH_DR_RC_UNIT DR_RC_UNIT 2796 +bordeaux MACH_BORDEAUX BORDEAUX 2797 +catania_b MACH_CATANIA_B CATANIA_B 2798 +mx51_ocean MACH_MX51_OCEAN MX51_OCEAN 2799 +ti8168evm MACH_TI8168EVM TI8168EVM 2800 +neocoreomap MACH_NEOCOREOMAP NEOCOREOMAP 2801 +withings_wbp MACH_WITHINGS_WBP WITHINGS_WBP 2802 +dbps MACH_DBPS DBPS 2803 +sbc9261 MACH_SBC9261 SBC9261 2804 +pcbfp0001 MACH_PCBFP0001 PCBFP0001 2805 +speedy MACH_SPEEDY SPEEDY 2806 +chrysaor MACH_CHRYSAOR CHRYSAOR 2807 +tango MACH_TANGO TANGO 2808 +synology_dsx11 MACH_SYNOLOGY_DSX11 SYNOLOGY_DSX11 2809 +hanlin_v3ext MACH_HANLIN_V3EXT HANLIN_V3EXT 2810 +hanlin_v5 MACH_HANLIN_V5 HANLIN_V5 2811 +hanlin_v3plus MACH_HANLIN_V3PLUS HANLIN_V3PLUS 2812 +iriver_story MACH_IRIVER_STORY IRIVER_STORY 2813 +irex_iliad MACH_IREX_ILIAD IREX_ILIAD 2814 +irex_dr1000 MACH_IREX_DR1000 IREX_DR1000 2815 +teton_bga MACH_TETON_BGA TETON_BGA 2816 +snapper9g45 MACH_SNAPPER9G45 SNAPPER9G45 2817 +tam3517 MACH_TAM3517 TAM3517 2818 +pdc100 MACH_PDC100 PDC100 2819 diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 7f3f59fcaa21..315a540c7ce5 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -428,26 +428,6 @@ static void vfp_pm_init(void) static inline void vfp_pm_init(void) { } #endif /* CONFIG_PM */ -/* - * Synchronise the hardware VFP state of a thread other than current with the - * saved one. This function is used by the ptrace mechanism. - */ -#ifdef CONFIG_SMP -void vfp_sync_hwstate(struct thread_info *thread) -{ -} - -void vfp_flush_hwstate(struct thread_info *thread) -{ - /* - * On SMP systems, the VFP state is automatically saved at every - * context switch. We mark the thread VFP state as belonging to a - * non-existent CPU so that the saved one will be reloaded when - * needed. - */ - thread->vfpstate.hard.cpu = NR_CPUS; -} -#else void vfp_sync_hwstate(struct thread_info *thread) { unsigned int cpu = get_cpu(); @@ -490,9 +470,18 @@ void vfp_flush_hwstate(struct thread_info *thread) last_VFP_context[cpu] = NULL; } +#ifdef CONFIG_SMP + /* + * For SMP we still have to take care of the case where the thread + * migrates to another CPU and then back to the original CPU on which + * the last VFP user is still the same thread. Mark the thread VFP + * state as belonging to a non-existent CPU so that the saved one will + * be reloaded in the above case. + */ + thread->vfpstate.hard.cpu = NR_CPUS; +#endif put_cpu(); } -#endif #include <linux/smp.h> @@ -545,7 +534,7 @@ static int __init vfp_init(void) */ elf_hwcap |= HWCAP_VFP; #ifdef CONFIG_VFPv3 - if (VFP_arch >= 3) { + if (VFP_arch >= 2) { elf_hwcap |= HWCAP_VFPv3; /* |