diff options
Diffstat (limited to 'arch/arm')
152 files changed, 3543 insertions, 1269 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ade7e924bef5..8a027f9e339e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -330,6 +330,8 @@ config ARCH_AT91 select IRQ_DOMAIN select NEED_MACH_GPIO_H select NEED_MACH_IO_H if PCCARD + select PINCTRL + select PINCTRL_AT91 if USE_OF help This enables support for systems based on Atmel AT91RM9200 and AT91SAM9* processors. @@ -364,6 +366,7 @@ config ARCH_CNS3XXX config ARCH_CLPS711X bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" + select ARCH_REQUIRE_GPIOLIB select ARCH_USES_GETTIMEOFFSET select CLKDEV_LOOKUP select COMMON_CLK @@ -547,6 +550,7 @@ config ARCH_KIRKWOOD select CPU_FEROCEON select GENERIC_CLOCKEVENTS select PCI + select PCI_QUIRKS select PLAT_ORION_LEGACY help Support for the following Marvell Kirkwood series SoCs: @@ -586,6 +590,7 @@ config ARCH_MMP select GPIO_PXA select IRQ_DOMAIN select NEED_MACH_GPIO_H + select PINCTRL select PLAT_PXA select SPARSE_IRQ help @@ -904,6 +909,7 @@ config ARCH_NOMADIK config PLAT_SPEAR bool "ST SPEAr" + select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKDEV_LOOKUP diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 5f914fca911b..c35baf102f6f 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -292,10 +292,10 @@ zinstall uinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ %.dtb: scripts - $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ + $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@ dtbs: scripts - $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ + $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) dtbs # We use MRPROPER_FILES and CLEAN_FILES now archclean: diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index f2aa09eb658e..abfce280f57b 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -15,8 +15,6 @@ ifneq ($(MACHINE),) include $(srctree)/$(MACHINE)/Makefile.boot endif -include $(srctree)/arch/arm/boot/dts/Makefile - # Note: the following conditions must always be true: # ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET) # PARAMS_PHYS must be within 4MB of ZRELADDR @@ -33,7 +31,7 @@ ifeq ($(CONFIG_XIP_KERNEL),y) $(obj)/xipImage: vmlinux FORCE $(call if_changed,objcopy) - $(kecho) ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' + @$(kecho) ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' $(obj)/Image $(obj)/zImage: FORCE @echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)' @@ -48,27 +46,17 @@ $(obj)/xipImage: FORCE $(obj)/Image: vmlinux FORCE $(call if_changed,objcopy) - $(kecho) ' Kernel: $@ is ready' + @$(kecho) ' Kernel: $@ is ready' $(obj)/compressed/vmlinux: $(obj)/Image FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed $@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE $(call if_changed,objcopy) - $(kecho) ' Kernel: $@ is ready' + @$(kecho) ' Kernel: $@ is ready' endif -targets += $(dtb-y) - -# Rule to build device tree blobs -$(obj)/%.dtb: $(src)/dts/%.dts FORCE - $(call if_changed_dep,dtc) - -$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) - -clean-files := *.dtb - ifneq ($(LOADADDR),) UIMAGE_LOADADDR=$(LOADADDR) else @@ -90,7 +78,7 @@ fi $(obj)/uImage: $(obj)/zImage FORCE @$(check_for_multiple_loadaddr) $(call if_changed,uimage) - $(kecho) ' Image $@ is ready' + @$(kecho) ' Image $@ is ready' $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(Q)$(MAKE) $(build)=$(obj)/bootp $@ @@ -98,7 +86,7 @@ $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(obj)/bootpImage: $(obj)/bootp/bootp FORCE $(call if_changed,objcopy) - $(kecho) ' Kernel: $@ is ready' + @$(kecho) ' Kernel: $@ is ready' PHONY += initrd FORCE initrd: diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 90275f036cd1..49ca86e37b8d 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -652,6 +652,15 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size mov pc, lr ENDPROC(__setup_mmu) +@ Enable unaligned access on v6, to allow better code generation +@ for the decompressor C code: +__armv6_mmu_cache_on: + mrc p15, 0, r0, c1, c0, 0 @ read SCTLR + bic r0, r0, #2 @ A (no unaligned access fault) + orr r0, r0, #1 << 22 @ U (v6 unaligned access model) + mcr p15, 0, r0, c1, c0, 0 @ write SCTLR + b __armv4_mmu_cache_on + __arm926ejs_mmu_cache_on: #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH mov r0, #4 @ put dcache in WT mode @@ -694,6 +703,9 @@ __armv7_mmu_cache_on: bic r0, r0, #1 << 28 @ clear SCTLR.TRE orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement orr r0, r0, #0x003c @ write buffer + bic r0, r0, #2 @ A (no unaligned access fault) + orr r0, r0, #1 << 22 @ U (v6 unaligned access model) + @ (needed for ARM1176) #ifdef CONFIG_MMU #ifdef CONFIG_CPU_ENDIAN_BE8 orr r0, r0, #1 << 25 @ big-endian page tables @@ -914,7 +926,7 @@ proc_types: .word 0x0007b000 @ ARMv6 .word 0x000ff000 - W(b) __armv4_mmu_cache_on + W(b) __armv6_mmu_cache_on W(b) __armv4_mmu_cache_off W(b) __armv6_mmu_cache_flush diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f37cf9fa5fa0..262493752234 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1,21 +1,37 @@ ifeq ($(CONFIG_OF),y) -dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \ - at91sam9263ek.dtb \ - at91sam9g20ek_2mmc.dtb \ - at91sam9g20ek.dtb \ - at91sam9g25ek.dtb \ - at91sam9m10g45ek.dtb \ - at91sam9n12ek.dtb \ - ethernut5.dtb \ - evk-pro3.dtb \ - kizbox.dtb \ - tny_a9260.dtb \ - tny_a9263.dtb \ - tny_a9g20.dtb \ - usb_a9260.dtb \ - usb_a9263.dtb \ - usb_a9g20.dtb +# Keep at91 dtb files sorted alphabetically for each SoC +# rm9200 +dtb-$(CONFIG_ARCH_AT91) += at91rm9200ek.dtb +# sam9260 +dtb-$(CONFIG_ARCH_AT91) += animeo_ip.dtb +dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb +dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb +dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb +dtb-$(CONFIG_ARCH_AT91) += tny_a9260.dtb +dtb-$(CONFIG_ARCH_AT91) += usb_a9260.dtb +# sam9263 +dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb +dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb +dtb-$(CONFIG_ARCH_AT91) += usb_a9263.dtb +# sam9g20 +dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek.dtb +dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek_2mmc.dtb +dtb-$(CONFIG_ARCH_AT91) += kizbox.dtb +dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb +dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb +# sam9g45 +dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb +dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb +# sam9n12 +dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb +# sam9x5 +dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb +dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb +dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb +dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb +dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb + dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ dove-cubox.dtb \ @@ -104,4 +120,12 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ wm8505-ref.dtb \ wm8650-mid.dtb +targets += dtbs endif + +# *.dtb used to be generated in the directory above. Clean out the +# old build results so people don't accidentally use them. +dtbs: $(addprefix $(obj)/, $(dtb-y)) + $(Q)rm -f $(obj)/../*.dtb + +clean-files := *.dtb diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts new file mode 100644 index 000000000000..74d92cd29d87 --- /dev/null +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -0,0 +1,178 @@ +/* + * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards + * + * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2 only. + */ + +/dts-v1/; +/include/ "at91sam9260.dtsi" + +/ { + model = "Somfy Animeo IP"; + compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9"; + + aliases { + serial0 = &usart1; + serial1 = &usart2; + serial2 = &usart0; + serial3 = &dbgu; + serial4 = &usart3; + serial5 = &uart0; + serial6 = &uart1; + }; + + chosen { + linux,stdout-path = &usart2; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + usart0: serial@fffb0000 { + pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>; + linux,rs485-enabled-at-boot-time; + status = "okay"; + }; + + usart1: serial@fffb4000 { + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>; + linux,rs485-enabled-at-boot-time; + status = "okay"; + }; + + usart2: serial@fffb8000 { + pinctrl-0 = <&pinctrl_usart2>; + status = "okay"; + }; + + macb0: ethernet@fffc4000 { + pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>; + phy-mode = "mii"; + status = "okay"; + }; + + mmc0: mmc@fffa8000 { + pinctrl-0 = <&pinctrl_mmc0_clk + &pinctrl_mmc0_slot1_cmd_dat0 + &pinctrl_mmc0_slot1_dat1_3>; + status = "okay"; + + slot@1 { + reg = <1>; + bus-width = <4>; + }; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x8000>; + }; + + barebox@8000 { + label = "barebox"; + reg = <0x8000 0x40000>; + }; + + bareboxenv@48000 { + label = "bareboxenv"; + reg = <0x48000 0x8000>; + }; + + user_block@0x50000 { + label = "user_block"; + reg = <0x50000 0xb0000>; + }; + + kernel@100000 { + label = "kernel"; + reg = <0x100000 0x1b0000>; + }; + + root@2b0000 { + label = "root"; + reg = <0x2b0000 0x1D50000>; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + atmel,vbus-gpio = <&pioB 15 1>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + power_green { + label = "power_green"; + gpios = <&pioC 17 0>; + linux,default-trigger = "heartbeat"; + }; + + power_red { + label = "power_red"; + gpios = <&pioA 2 0>; + }; + + tx_green { + label = "tx_green"; + gpios = <&pioC 19 0>; + }; + + tx_red { + label = "tx_red"; + gpios = <&pioC 18 0>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + keyswitch_in { + label = "keyswitch_in"; + gpios = <&pioB 1 0>; + linux,code = <28>; + gpio-key,wakeup; + }; + + error_in { + label = "error_in"; + gpios = <&pioB 2 0>; + linux,code = <29>; + gpio-key,wakeup; + }; + + btn { + label = "btn"; + gpios = <&pioC 23 0>; + linux,code = <31>; + gpio-key,wakeup; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi new file mode 100644 index 000000000000..e154f242c680 --- /dev/null +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -0,0 +1,349 @@ +/* + * at91rm9200.dtsi - Device Tree Include file for AT91RM9200 family SoC + * + * Copyright (C) 2011 Atmel, + * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>, + * 2012 Joachim Eastwood <manabian@gmail.com> + * + * Based on at91sam9260.dtsi + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Atmel AT91RM9200 family SoC"; + compatible = "atmel,at91rm9200"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + serial1 = &usart0; + serial2 = &usart1; + serial3 = &usart2; + serial4 = &usart3; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio3 = &pioD; + tcb0 = &tcb0; + tcb1 = &tcb1; + }; + cpus { + cpu@0 { + compatible = "arm,arm920t"; + }; + }; + + memory { + reg = <0x20000000 0x04000000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + aic: interrupt-controller@fffff000 { + #interrupt-cells = <3>; + compatible = "atmel,at91rm9200-aic"; + interrupt-controller; + reg = <0xfffff000 0x200>; + atmel,external-irqs = <25 26 27 28 29 30 31>; + }; + + ramc0: ramc@ffffff00 { + compatible = "atmel,at91rm9200-sdramc"; + reg = <0xffffff00 0x100>; + }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91rm9200-pmc"; + reg = <0xfffffc00 0x100>; + }; + + st: timer@fffffd00 { + compatible = "atmel,at91rm9200-st"; + reg = <0xfffffd00 0x100>; + interrupts = <1 4 7>; + }; + + tcb0: timer@fffa0000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfffa0000 0x100>; + interrupts = <17 4 0 18 4 0 19 4 0>; + }; + + tcb1: timer@fffa4000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfffa4000 0x100>; + interrupts = <20 4 0 21 4 0 22 4 0>; + }; + + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x800>; + + atmel,mux-mask = < + /* A B */ + 0xffffffff 0xffffffff /* pioA */ + 0xffffffff 0x083fffff /* pioB */ + 0xffff3fff 0x00000000 /* pioC */ + 0x03ff87ff 0x0fffff80 /* pioD */ + >; + + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <0 30 0x1 0x0 /* PA30 periph A */ + 0 31 0x1 0x1>; /* PA31 periph with pullup */ + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <0 17 0x1 0x0 /* PA17 periph A */ + 0 18 0x1 0x0>; /* PA18 periph A */ + }; + + pinctrl_uart0_rts: uart0_rts-0 { + atmel,pins = + <0 20 0x1 0x0>; /* PA20 periph A */ + }; + + pinctrl_uart0_cts: uart0_cts-0 { + atmel,pins = + <0 21 0x1 0x0>; /* PA21 periph A */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <1 20 0x1 0x1 /* PB20 periph A with pullup */ + 1 21 0x1 0x0>; /* PB21 periph A */ + }; + + pinctrl_uart1_rts: uart1_rts-0 { + atmel,pins = + <1 24 0x1 0x0>; /* PB24 periph A */ + }; + + pinctrl_uart1_cts: uart1_cts-0 { + atmel,pins = + <1 26 0x1 0x0>; /* PB26 periph A */ + }; + + pinctrl_uart1_dtr_dsr: uart1_dtr_dsr-0 { + atmel,pins = + <1 19 0x1 0x0 /* PB19 periph A */ + 1 25 0x1 0x0>; /* PB25 periph A */ + }; + + pinctrl_uart1_dcd: uart1_dcd-0 { + atmel,pins = + <1 23 0x1 0x0>; /* PB23 periph A */ + }; + + pinctrl_uart1_ri: uart1_ri-0 { + atmel,pins = + <1 18 0x1 0x0>; /* PB18 periph A */ + }; + }; + + uart2 { + pinctrl_uart2: uart2-0 { + atmel,pins = + <0 22 0x1 0x0 /* PA22 periph A */ + 0 23 0x1 0x1>; /* PA23 periph A with pullup */ + }; + + pinctrl_uart2_rts: uart2_rts-0 { + atmel,pins = + <0 30 0x2 0x0>; /* PA30 periph B */ + }; + + pinctrl_uart2_cts: uart2_cts-0 { + atmel,pins = + <0 31 0x2 0x0>; /* PA31 periph B */ + }; + }; + + uart3 { + pinctrl_uart3: uart3-0 { + atmel,pins = + <0 5 0x2 0x1 /* PA5 periph B with pullup */ + 0 6 0x2 0x0>; /* PA6 periph B */ + }; + + pinctrl_uart3_rts: uart3_rts-0 { + atmel,pins = + <1 0 0x2 0x0>; /* PB0 periph B */ + }; + + pinctrl_uart3_cts: uart3_cts-0 { + atmel,pins = + <1 1 0x2 0x0>; /* PB1 periph B */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <2 2 0x0 0x1 /* PC2 gpio RDY pin pull_up */ + 1 1 0x0 0x1>; /* PB1 gpio CD pin pull_up */ + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffffa00 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <5 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + dbgu: serial@fffff200 { + compatible = "atmel,at91rm9200-usart"; + reg = <0xfffff200 0x200>; + interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; + status = "disabled"; + }; + + usart0: serial@fffc0000 { + compatible = "atmel,at91rm9200-usart"; + reg = <0xfffc0000 0x200>; + interrupts = <6 4 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "disabled"; + }; + + usart1: serial@fffc4000 { + compatible = "atmel,at91rm9200-usart"; + reg = <0xfffc4000 0x200>; + interrupts = <7 4 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "disabled"; + }; + + usart2: serial@fffc8000 { + compatible = "atmel,at91rm9200-usart"; + reg = <0xfffc8000 0x200>; + interrupts = <8 4 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "disabled"; + }; + + usart3: serial@fffcc000 { + compatible = "atmel,at91rm9200-usart"; + reg = <0xfffcc000 0x200>; + interrupts = <23 4 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "disabled"; + }; + + usb1: gadget@fffb0000 { + compatible = "atmel,at91rm9200-udc"; + reg = <0xfffb0000 0x4000>; + interrupts = <11 4 2>; + status = "disabled"; + }; + }; + + nand0: nand@40000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40000000 0x10000000>; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + nand-ecc-mode = "soft"; + gpios = <&pioC 2 0 + 0 + &pioB 1 0 + >; + status = "disabled"; + }; + + usb0: ohci@00300000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00300000 0x100000>; + interrupts = <23 4 2>; + status = "disabled"; + }; + }; + + i2c@0 { + compatible = "i2c-gpio"; + gpios = <&pioA 23 0 /* sda */ + &pioA 24 0 /* scl */ + >; + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts new file mode 100644 index 000000000000..8aa48931e0a2 --- /dev/null +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -0,0 +1,79 @@ +/* + * at91rm9200ek.dts - Device Tree file for Atmel AT91RM9200 evaluation kit + * + * Copyright (C) 2012 Joachim Eastwood <manabian@gmail.com> + * + * Licensed under GPLv2 only + */ +/dts-v1/; +/include/ "at91rm9200.dtsi" + +/ { + model = "Atmel AT91RM9200 evaluation kit"; + compatible = "atmel,at91rm9200ek", "atmel,at91rm9200"; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + dbgu: serial@fffff200 { + status = "okay"; + }; + + usart1: serial@fffc4000 { + pinctrl-0 = + <&pinctrl_uart1 + &pinctrl_uart1_rts + &pinctrl_uart1_cts + &pinctrl_uart1_dtr_dsr + &pinctrl_uart1_dcd + &pinctrl_uart1_ri>; + status = "okay"; + }; + + usb1: gadget@fffb0000 { + atmel,vbus-gpio = <&pioD 4 0>; + status = "okay"; + }; + }; + + usb0: ohci@00300000 { + num-ports = <2>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + ds2 { + label = "green"; + gpios = <&pioB 0 0x1>; + linux,default-trigger = "mmc0"; + }; + + ds4 { + label = "yellow"; + gpios = <&pioB 1 0x1>; + linux,default-trigger = "heartbeat"; + }; + + ds6 { + label = "red"; + gpios = <&pioB 2 0x1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index d410581a5a85..b1d3fab60e0a 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -21,8 +21,8 @@ serial2 = &usart1; serial3 = &usart2; serial4 = &usart3; - serial5 = &usart4; - serial6 = &usart5; + serial5 = &uart0; + serial6 = &uart1; gpio0 = &pioA; gpio1 = &pioB; gpio2 = &pioC; @@ -98,40 +98,250 @@ interrupts = <26 4 0 27 4 0 28 4 0>; }; - pioA: gpio@fffff400 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x600>; + + atmel,mux-mask = < + /* A B */ + 0xffffffff 0xffc00c3b /* pioA */ + 0xffffffff 0x7fff3ccf /* pioB */ + 0xffffffff 0x007fffff /* pioC */ + >; + + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <1 14 0x1 0x0 /* PB14 periph A */ + 1 15 0x1 0x1>; /* PB15 periph with pullup */ + }; + }; - pioB: gpio@fffff600 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <1 4 0x1 0x0 /* PB4 periph A */ + 1 5 0x1 0x0>; /* PB5 periph A */ + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <1 26 0x1 0x0>; /* PB26 periph A */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <1 27 0x1 0x0>; /* PB27 periph A */ + }; + + pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 { + atmel,pins = + <1 24 0x1 0x0 /* PB24 periph A */ + 1 22 0x1 0x0>; /* PB22 periph A */ + }; + + pinctrl_usart0_dcd: usart0_dcd-0 { + atmel,pins = + <1 23 0x1 0x0>; /* PB23 periph A */ + }; + + pinctrl_usart0_ri: usart0_ri-0 { + atmel,pins = + <1 25 0x1 0x0>; /* PB25 periph A */ + }; + }; - pioC: gpio@fffff800 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <4 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <2 6 0x1 0x1 /* PB6 periph A with pullup */ + 2 7 0x1 0x0>; /* PB7 periph A */ + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + <1 28 0x1 0x0>; /* PB28 periph A */ + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + <1 29 0x1 0x0>; /* PB29 periph A */ + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <1 8 0x1 0x1 /* PB8 periph A with pullup */ + 1 9 0x1 0x0>; /* PB9 periph A */ + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + <0 4 0x1 0x0>; /* PA4 periph A */ + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + <0 5 0x1 0x0>; /* PA5 periph A */ + }; + }; + + usart3 { + pinctrl_usart3: usart3-0 { + atmel,pins = + <2 10 0x1 0x1 /* PB10 periph A with pullup */ + 2 11 0x1 0x0>; /* PB11 periph A */ + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + <3 8 0x2 0x0>; /* PB8 periph B */ + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + <3 10 0x2 0x0>; /* PB10 periph B */ + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <0 31 0x2 0x1 /* PA31 periph B with pullup */ + 0 30 0x2 0x0>; /* PA30 periph B */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <2 12 0x1 0x1 /* PB12 periph A with pullup */ + 2 13 0x1 0x0>; /* PB13 periph A */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <2 13 0x0 0x1 /* PC13 gpio RDY pin pull_up */ + 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + }; + }; + + macb { + pinctrl_macb_rmii: macb_rmii-0 { + atmel,pins = + <0 12 0x1 0x0 /* PA12 periph A */ + 0 13 0x1 0x0 /* PA13 periph A */ + 0 14 0x1 0x0 /* PA14 periph A */ + 0 15 0x1 0x0 /* PA15 periph A */ + 0 16 0x1 0x0 /* PA16 periph A */ + 0 17 0x1 0x0 /* PA17 periph A */ + 0 18 0x1 0x0 /* PA18 periph A */ + 0 19 0x1 0x0 /* PA19 periph A */ + 0 20 0x1 0x0 /* PA20 periph A */ + 0 21 0x1 0x0>; /* PA21 periph A */ + }; + + pinctrl_macb_rmii_mii: macb_rmii_mii-0 { + atmel,pins = + <0 22 0x2 0x0 /* PA22 periph B */ + 0 23 0x2 0x0 /* PA23 periph B */ + 0 24 0x2 0x0 /* PA24 periph B */ + 0 25 0x2 0x0 /* PA25 periph B */ + 0 26 0x2 0x0 /* PA26 periph B */ + 0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0>; /* PA29 periph B */ + }; + + pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 { + atmel,pins = + <0 10 0x2 0x0 /* PA10 periph B */ + 0 11 0x2 0x0 /* PA11 periph B */ + 0 24 0x2 0x0 /* PA24 periph B */ + 0 25 0x2 0x0 /* PA25 periph B */ + 0 26 0x2 0x0 /* PA26 periph B */ + 0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0>; /* PA29 periph B */ + }; + }; + + mmc0 { + pinctrl_mmc0_clk: mmc0_clk-0 { + atmel,pins = + <0 8 0x1 0x0>; /* PA8 periph A */ + }; + + pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { + atmel,pins = + <0 7 0x1 0x1 /* PA7 periph A with pullup */ + 0 6 0x1 0x1>; /* PA6 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <0 9 0x1 0x1 /* PA9 periph A with pullup */ + 0 10 0x1 0x1 /* PA10 periph A with pullup */ + 0 11 0x1 0x1>; /* PA11 periph A with pullup */ + }; + + pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { + atmel,pins = + <0 1 0x2 0x1 /* PA1 periph B with pullup */ + 0 0 0x2 0x1>; /* PA0 periph B with pullup */ + }; + + pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { + atmel,pins = + <0 5 0x2 0x1 /* PA5 periph B with pullup */ + 0 4 0x2 0x1 /* PA4 periph B with pullup */ + 0 3 0x2 0x1>; /* PA3 periph B with pullup */ + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; }; dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; }; @@ -141,6 +351,8 @@ interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; }; @@ -150,6 +362,8 @@ interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; @@ -159,6 +373,8 @@ interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; }; @@ -168,24 +384,30 @@ interrupts = <23 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; }; - usart4: serial@fffd4000 { + uart0: serial@fffd4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd4000 0x200>; interrupts = <24 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; status = "disabled"; }; - usart5: serial@fffd8000 { + uart1: serial@fffd8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd8000 0x200>; interrupts = <25 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; status = "disabled"; }; @@ -193,6 +415,8 @@ compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffc4000 0x100>; interrupts = <21 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; }; @@ -212,6 +436,15 @@ status = "disabled"; }; + mmc0: mmc@fffa8000 { + compatible = "atmel,hsmci"; + reg = <0xfffa8000 0x600>; + interrupts = <9 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + adc0: adc@fffe0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; @@ -257,6 +490,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; gpios = <&pioC 13 0 &pioC 14 0 0 diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 3e6e5c1abbf3..66106eecf1ed 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -89,60 +89,243 @@ reg = <0xfffffd10 0x10>; }; - pioA: gpio@fffff200 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff200 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + pinctrl@fffff200 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff200 0xfffff200 0xa00>; - pioB: gpio@fffff400 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + atmel,mux-mask = < + /* A B */ + 0xfffffffb 0xffffe07f /* pioA */ + 0x0007ffff 0x39072fff /* pioB */ + 0xffffffff 0x3ffffff8 /* pioC */ + 0xfffffbff 0xffffffff /* pioD */ + 0xffe00fff 0xfbfcff00 /* pioE */ + >; - pioC: gpio@fffff600 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <4 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <2 30 0x1 0x0 /* PC30 periph A */ + 2 31 0x1 0x1>; /* PC31 periph with pullup */ + }; + }; - pioD: gpio@fffff800 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <4 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <0 26 0x1 0x1 /* PA26 periph A with pullup */ + 0 27 0x1 0x0>; /* PA27 periph A */ + }; - pioE: gpio@fffffa00 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x100>; - interrupts = <4 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <0 28 0x1 0x0>; /* PA28 periph A */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <0 29 0x1 0x0>; /* PA29 periph A */ + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <3 0 0x1 0x1 /* PD0 periph A with pullup */ + 3 1 0x1 0x0>; /* PD1 periph A */ + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + <3 7 0x2 0x0>; /* PD7 periph B */ + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + <3 8 0x2 0x0>; /* PD8 periph B */ + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <3 2 0x1 0x1 /* PD2 periph A with pullup */ + 3 3 0x1 0x0>; /* PD3 periph A */ + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + <3 5 0x2 0x0>; /* PD5 periph B */ + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + <4 6 0x2 0x0>; /* PD6 periph B */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <0 22 0x0 0x1 /* PA22 gpio RDY pin pull_up*/ + 3 15 0x0 0x1>; /* PD15 gpio enable pin pull_up */ + }; + }; + + macb { + pinctrl_macb_rmii: macb_rmii-0 { + atmel,pins = + <2 25 0x2 0x0 /* PC25 periph B */ + 4 21 0x1 0x0 /* PE21 periph A */ + 4 23 0x1 0x0 /* PE23 periph A */ + 4 24 0x1 0x0 /* PE24 periph A */ + 4 25 0x1 0x0 /* PE25 periph A */ + 4 26 0x1 0x0 /* PE26 periph A */ + 4 27 0x1 0x0 /* PE27 periph A */ + 4 28 0x1 0x0 /* PE28 periph A */ + 4 29 0x1 0x0 /* PE29 periph A */ + 4 30 0x1 0x0>; /* PE30 periph A */ + }; + + pinctrl_macb_rmii_mii: macb_rmii_mii-0 { + atmel,pins = + <2 20 0x2 0x0 /* PC20 periph B */ + 2 21 0x2 0x0 /* PC21 periph B */ + 2 22 0x2 0x0 /* PC22 periph B */ + 2 23 0x2 0x0 /* PC23 periph B */ + 2 24 0x2 0x0 /* PC24 periph B */ + 2 25 0x2 0x0 /* PC25 periph B */ + 2 27 0x2 0x0 /* PC27 periph B */ + 4 22 0x2 0x0>; /* PE22 periph B */ + }; + }; + + mmc0 { + pinctrl_mmc0_clk: mmc0_clk-0 { + atmel,pins = + <0 12 0x1 0x0>; /* PA12 periph A */ + }; + + pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { + atmel,pins = + <0 1 0x1 0x1 /* PA1 periph A with pullup */ + 0 0 0x1 0x1>; /* PA0 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <0 3 0x1 0x1 /* PA3 periph A with pullup */ + 0 4 0x1 0x1 /* PA4 periph A with pullup */ + 0 5 0x1 0x1>; /* PA5 periph A with pullup */ + }; + + pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { + atmel,pins = + <0 16 0x1 0x1 /* PA16 periph A with pullup */ + 0 17 0x1 0x1>; /* PA17 periph A with pullup */ + }; + + pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { + atmel,pins = + <0 18 0x1 0x1 /* PA18 periph A with pullup */ + 0 19 0x1 0x1 /* PA19 periph A with pullup */ + 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + }; + }; + + mmc1 { + pinctrl_mmc1_clk: mmc1_clk-0 { + atmel,pins = + <0 6 0x1 0x0>; /* PA6 periph A */ + }; + + pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 { + atmel,pins = + <0 7 0x1 0x1 /* PA7 periph A with pullup */ + 0 8 0x1 0x1>; /* PA8 periph A with pullup */ + }; + + pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { + atmel,pins = + <0 9 0x1 0x1 /* PA9 periph A with pullup */ + 0 10 0x1 0x1 /* PA10 periph A with pullup */ + 0 11 0x1 0x1>; /* PA11 periph A with pullup */ + }; + + pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 { + atmel,pins = + <0 21 0x1 0x1 /* PA21 periph A with pullup */ + 0 22 0x1 0x1>; /* PA22 periph A with pullup */ + }; + + pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 { + atmel,pins = + <0 23 0x1 0x1 /* PA23 periph A with pullup */ + 0 24 0x1 0x1 /* PA24 periph A with pullup */ + 0 25 0x1 0x1>; /* PA25 periph A with pullup */ + }; + }; + + pioA: gpio@fffff200 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioE: gpio@fffffa00 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; }; dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; }; @@ -152,6 +335,8 @@ interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; }; @@ -161,6 +346,8 @@ interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; @@ -170,6 +357,8 @@ interrupts = <9 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; }; @@ -177,6 +366,8 @@ compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; interrupts = <21 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; }; @@ -195,6 +386,24 @@ #size-cells = <0>; status = "disabled"; }; + + mmc0: mmc@fff80000 { + compatible = "atmel,hsmci"; + reg = <0xfff80000 0x600>; + interrupts = <10 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mmc1: mmc@fff84000 { + compatible = "atmel,hsmci"; + reg = <0xfff84000 0x600>; + interrupts = <11 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; nand0: nand@40000000 { @@ -206,6 +415,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; gpios = <&pioA 22 0 &pioD 15 0 0 diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index f86ac4b609fc..1eb08728f527 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -38,6 +38,10 @@ }; usart0: serial@fff8c000 { + pinctrl-0 = < + &pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts>; status = "okay"; }; @@ -50,6 +54,31 @@ atmel,vbus-gpio = <&pioA 25 0>; status = "okay"; }; + + mmc0: mmc@fff80000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_clk + &pinctrl_mmc0_slot0_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioE 18 0>; + wp-gpios = <&pioE 19 0>; + }; + }; + + pinctrl@fffff200 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <5 18 0x0 0x5 /* PE18 gpio CD pin pull up and deglitch */ + 5 19 0x0 0x1>; /* PE19 gpio WP pin pull up */ + }; + }; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi new file mode 100644 index 000000000000..fbe7a7089c2a --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g15.dtsi @@ -0,0 +1,28 @@ +/* + * at91sam9g15.dtsi - Device Tree Include file for AT91SAM9G15 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/include/ "at91sam9x5.dtsi" + +/ { + model = "Atmel AT91SAM9G15 SoC"; + compatible = "atmel, at91sam9g15, atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe0399f 0x00000000 /* pioA */ + 0x00040000 0x00047e3f 0x00000000 /* pioB */ + 0xfdffffff 0x00000000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts new file mode 100644 index 000000000000..86dd3f6d938f --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g15ek.dts @@ -0,0 +1,16 @@ +/* + * at91sam9g15ek.dts - Device Tree file for AT91SAM9G15-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9g15.dtsi" +/include/ "at91sam9x5ek.dtsi" + +/ { + model = "Atmel AT91SAM9G25-EK"; + compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; +}; diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts index f1b2e148ac8c..66467b113126 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts +++ b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts @@ -12,6 +12,32 @@ model = "Atmel at91sam9g20ek 2 mmc"; compatible = "atmel,at91sam9g20ek_2mmc", "atmel,at91sam9g20", "atmel,at91sam9"; + ahb { + apb{ + mmc0: mmc@fffa8000 { + /* clk already mux wuth slot0 */ + pinctrl-0 = < + &pinctrl_board_mmc0_slot0 + &pinctrl_mmc0_slot0_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioC 2 0>; + }; + }; + + pinctrl@fffff400 { + mmc0_slot0 { + pinctrl_board_mmc0_slot0: mmc0_slot0-board { + atmel,pins = + <2 2 0x0 0x5>; /* PC2 gpio CD pin pull up and deglitch */ + }; + }; + }; + }; + }; + leds { compatible = "gpio-leds"; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index e6391a4e6649..32a500a0e481 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -35,6 +35,13 @@ }; usart0: serial@fffb0000 { + pinctrl-0 = + <&pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts + &pinctrl_usart0_dtr_dsr + &pinctrl_usart0_dcd + &pinctrl_usart0_ri>; status = "okay"; }; @@ -51,6 +58,29 @@ atmel,vbus-gpio = <&pioC 5 0>; status = "okay"; }; + + mmc0: mmc@fffa8000 { + pinctrl-0 = < + &pinctrl_board_mmc0_slot1 + &pinctrl_mmc0_clk + &pinctrl_mmc0_slot1_cmd_dat0 + &pinctrl_mmc0_slot1_dat1_3>; + status = "okay"; + slot@1 { + reg = <1>; + bus-width = <4>; + cd-gpios = <&pioC 9 0>; + }; + }; + + pinctrl@fffff400 { + mmc0_slot1 { + pinctrl_board_mmc0_slot1: mmc0_slot1-board { + atmel,pins = + <2 9 0x0 0x5>; /* PC9 gpio CD pin pull up and deglitch */ + }; + }; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi new file mode 100644 index 000000000000..05a718fb83c4 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g25.dtsi @@ -0,0 +1,28 @@ +/* + * at91sam9g25.dtsi - Device Tree Include file for AT91SAM9G25 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/include/ "at91sam9x5.dtsi" + +/ { + model = "Atmel AT91SAM9G25 SoC"; + compatible = "atmel, at91sam9g25, atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe0399f 0xc000001c /* pioA */ + 0x0007ffff 0x8000fe3f 0x00000000 /* pioB */ + 0x80000000 0x07c0ffff 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index 877c08f06763..c5ab16fba059 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -7,55 +7,10 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9x5.dtsi" -/include/ "at91sam9x5cm.dtsi" +/include/ "at91sam9g25.dtsi" +/include/ "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9G25-EK"; compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; - - chosen { - bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; - }; - - ahb { - apb { - dbgu: serial@fffff200 { - status = "okay"; - }; - - usart0: serial@f801c000 { - status = "okay"; - }; - - macb0: ethernet@f802c000 { - phy-mode = "rmii"; - status = "okay"; - }; - - i2c0: i2c@f8010000 { - status = "okay"; - }; - - i2c1: i2c@f8014000 { - status = "okay"; - }; - - i2c2: i2c@f8018000 { - status = "okay"; - }; - }; - - usb0: ohci@00600000 { - status = "okay"; - num-ports = <2>; - atmel,vbus-gpio = <&pioD 19 1 - &pioD 20 1 - >; - }; - - usb1: ehci@00700000 { - status = "okay"; - }; - }; }; diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi new file mode 100644 index 000000000000..f9d14a722794 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g35.dtsi @@ -0,0 +1,28 @@ +/* + * at91sam9g35.dtsi - Device Tree Include file for AT91SAM9G35 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/include/ "at91sam9x5.dtsi" + +/ { + model = "Atmel AT91SAM9G35 SoC"; + compatible = "atmel, at91sam9g35, atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe0399f 0xc000000c /* pioA */ + 0x000406ff 0x00047e3f 0x00000000 /* pioB */ + 0xfdffffff 0x00000000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts new file mode 100644 index 000000000000..95944bdd798d --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g35ek.dts @@ -0,0 +1,16 @@ +/* + * at91sam9g35ek.dts - Device Tree file for AT91SAM9G35-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9g35.dtsi" +/include/ "at91sam9x5ek.dtsi" + +/ { + model = "Atmel AT91SAM9G35-EK"; + compatible = "atmel,at91sam9g35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; +}; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 3add030d61f8..0741caeeced1 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -108,60 +108,243 @@ interrupts = <21 4 0>; }; - pioA: gpio@fffff200 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff200 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + pinctrl@fffff200 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff200 0xfffff200 0xa00>; + + atmel,mux-mask = < + /* A B */ + 0xffffffff 0xffc003ff /* pioA */ + 0xffffffff 0x800f8f00 /* pioB */ + 0xffffffff 0x00000e00 /* pioC */ + 0xffffffff 0xff0c1381 /* pioD */ + 0xffffffff 0x81ffff81 /* pioE */ + >; + + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <1 12 0x1 0x0 /* PB12 periph A */ + 1 13 0x1 0x0>; /* PB13 periph A */ + }; + }; - pioB: gpio@fffff400 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <1 19 0x1 0x1 /* PB19 periph A with pullup */ + 1 18 0x1 0x0>; /* PB18 periph A */ + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <1 17 0x2 0x0>; /* PB17 periph B */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <1 15 0x2 0x0>; /* PB15 periph B */ + }; + }; - pioC: gpio@fffff600 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <4 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + uart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <1 4 0x1 0x1 /* PB4 periph A with pullup */ + 1 5 0x1 0x0>; /* PB5 periph A */ + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + <3 16 0x1 0x0>; /* PD16 periph A */ + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + <3 17 0x1 0x0>; /* PD17 periph A */ + }; + }; - pioD: gpio@fffff800 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <5 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <1 6 0x1 0x1 /* PB6 periph A with pullup */ + 1 7 0x1 0x0>; /* PB7 periph A */ + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + <2 9 0x2 0x0>; /* PC9 periph B */ + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + <2 11 0x2 0x0>; /* PC11 periph B */ + }; + }; - pioE: gpio@fffffa00 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x100>; - interrupts = <5 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + usart3 { + pinctrl_usart3: usart3-0 { + atmel,pins = + <1 8 0x1 0x1 /* PB9 periph A with pullup */ + 1 9 0x1 0x0>; /* PB8 periph A */ + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + <0 23 0x2 0x0>; /* PA23 periph B */ + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + <0 24 0x2 0x0>; /* PA24 periph B */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <2 8 0x0 0x1 /* PC8 gpio RDY pin pull_up*/ + 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + }; + }; + + macb { + pinctrl_macb_rmii: macb_rmii-0 { + atmel,pins = + <0 10 0x1 0x0 /* PA10 periph A */ + 0 11 0x1 0x0 /* PA11 periph A */ + 0 12 0x1 0x0 /* PA12 periph A */ + 0 13 0x1 0x0 /* PA13 periph A */ + 0 14 0x1 0x0 /* PA14 periph A */ + 0 15 0x1 0x0 /* PA15 periph A */ + 0 16 0x1 0x0 /* PA16 periph A */ + 0 17 0x1 0x0 /* PA17 periph A */ + 0 18 0x1 0x0 /* PA18 periph A */ + 0 19 0x1 0x0>; /* PA19 periph A */ + }; + + pinctrl_macb_rmii_mii: macb_rmii_mii-0 { + atmel,pins = + <0 6 0x2 0x0 /* PA6 periph B */ + 0 7 0x2 0x0 /* PA7 periph B */ + 0 8 0x2 0x0 /* PA8 periph B */ + 0 9 0x2 0x0 /* PA9 periph B */ + 0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0 /* PA29 periph B */ + 0 30 0x2 0x0>; /* PA30 periph B */ + }; + }; + + mmc0 { + pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { + atmel,pins = + <0 0 0x1 0x0 /* PA0 periph A */ + 0 1 0x1 0x1 /* PA1 periph A with pullup */ + 0 2 0x1 0x1>; /* PA2 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <0 3 0x1 0x1 /* PA3 periph A with pullup */ + 0 4 0x1 0x1 /* PA4 periph A with pullup */ + 0 5 0x1 0x1>; /* PA5 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 { + atmel,pins = + <0 6 0x1 0x1 /* PA6 periph A with pullup */ + 0 7 0x1 0x1 /* PA7 periph A with pullup */ + 0 8 0x1 0x1 /* PA8 periph A with pullup */ + 0 9 0x1 0x1>; /* PA9 periph A with pullup */ + }; + }; + + mmc1 { + pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { + atmel,pins = + <0 31 0x1 0x0 /* PA31 periph A */ + 0 22 0x1 0x1 /* PA22 periph A with pullup */ + 0 23 0x1 0x1>; /* PA23 periph A with pullup */ + }; + + pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { + atmel,pins = + <0 24 0x1 0x1 /* PA24 periph A with pullup */ + 0 25 0x1 0x1 /* PA25 periph A with pullup */ + 0 26 0x1 0x1>; /* PA26 periph A with pullup */ + }; + + pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 { + atmel,pins = + <0 27 0x1 0x1 /* PA27 periph A with pullup */ + 0 28 0x1 0x1 /* PA28 periph A with pullup */ + 0 29 0x1 0x1 /* PA29 periph A with pullup */ + 0 20 0x1 0x1>; /* PA30 periph A with pullup */ + }; + }; + + pioA: gpio@fffff200 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <5 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioE: gpio@fffffa00 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <5 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; }; dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; }; @@ -171,6 +354,8 @@ interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; }; @@ -180,6 +365,8 @@ interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; @@ -189,6 +376,8 @@ interrupts = <9 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; }; @@ -198,6 +387,8 @@ interrupts = <10 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; }; @@ -205,6 +396,8 @@ compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; interrupts = <25 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; }; @@ -262,6 +455,24 @@ trigger-value = <0x6>; }; }; + + mmc0: mmc@fff80000 { + compatible = "atmel,hsmci"; + reg = <0xfff80000 0x600>; + interrupts = <11 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mmc1: mmc@fffd0000 { + compatible = "atmel,hsmci"; + reg = <0xfffd0000 0x600>; + interrupts = <29 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; nand0: nand@40000000 { @@ -273,6 +484,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; gpios = <&pioC 8 0 &pioC 14 0 0 diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 15e1dd43f625..20c31913c270 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -39,6 +39,10 @@ }; usart1: serial@fff90000 { + pinctrl-0 = + <&pinctrl_usart1 + &pinctrl_usart1_rts + &pinctrl_usart1_cts>; status = "okay"; }; @@ -54,6 +58,50 @@ i2c1: i2c@fff88000 { status = "okay"; }; + + mmc0: mmc@fff80000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 10 0>; + }; + }; + + mmc1: mmc@fffd0000 { + pinctrl-0 = < + &pinctrl_board_mmc1 + &pinctrl_mmc1_slot0_clk_cmd_dat0 + &pinctrl_mmc1_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 11 0>; + wp-gpios = <&pioD 29 0>; + }; + }; + + pinctrl@fffff200 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <3 10 0x0 0x5>; /* PD10 gpio CD pin pull up and deglitch */ + }; + }; + + mmc1 { + pinctrl_board_mmc1: mmc1-board { + atmel,pins = + <3 11 0x0 0x5 /* PD11 gpio CD pin pull up and deglitch */ + 3 29 0x0 0x1>; /* PD29 gpio WP pin pull up */ + }; + }; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 82508d68aa7e..e9efb34f4379 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -84,6 +84,15 @@ reg = <0xfffffe10 0x10>; }; + mmc0: mmc@f0008000 { + compatible = "atmel,hsmci"; + reg = <0xf0008000 0x600>; + interrupts = <12 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; @@ -102,50 +111,186 @@ interrupts = <20 4 0>; }; - pioA: gpio@fffff400 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x800>; - pioB: gpio@fffff600 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe07983 0x00000000 /* pioA */ + 0x00040000 0x00047e0f 0x00000000 /* pioB */ + 0xfdffffff 0x07c00000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; - pioC: gpio@fffff800 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <0 9 0x1 0x0 /* PA9 periph A */ + 0 10 0x1 0x1>; /* PA10 periph with pullup */ + }; + }; - pioD: gpio@fffffa00 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <0 1 0x1 0x1 /* PA1 periph A with pullup */ + 0 0 0x1 0x0>; /* PA0 periph A */ + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <0 2 0x1 0x0>; /* PA2 periph A */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <0 3 0x1 0x0>; /* PA3 periph A */ + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <0 6 0x1 0x1 /* PA6 periph A with pullup */ + 0 5 0x1 0x0>; /* PA5 periph A */ + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <0 8 0x1 0x1 /* PA8 periph A with pullup */ + 0 7 0x1 0x0>; /* PA7 periph A */ + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + <1 0 0x2 0x0>; /* PB0 periph B */ + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + <1 1 0x2 0x0>; /* PB1 periph B */ + }; + }; + + usart3 { + pinctrl_usart3: usart3-0 { + atmel,pins = + <2 23 0x2 0x1 /* PC23 periph B with pullup */ + 2 22 0x2 0x0>; /* PC22 periph B */ + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + <2 24 0x2 0x0>; /* PC24 periph B */ + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + <2 25 0x2 0x0>; /* PC25 periph B */ + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <2 9 0x3 0x1 /* PC9 periph C with pullup */ + 2 8 0x3 0x0>; /* PC8 periph C */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <2 16 0x3 0x1 /* PC17 periph C with pullup */ + 2 17 0x3 0x0>; /* PC16 periph C */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <3 5 0x0 0x1 /* PD5 gpio RDY pin pull_up*/ + 3 4 0x0 0x1>; /* PD4 gpio enable pin pull_up */ + }; + }; + + mmc0 { + pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { + atmel,pins = + <0 17 0x1 0x0 /* PA17 periph A */ + 0 16 0x1 0x1 /* PA16 periph A with pullup */ + 0 15 0x1 0x1>; /* PA15 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <0 18 0x1 0x1 /* PA18 periph A with pullup */ + 0 19 0x1 0x1 /* PA19 periph A with pullup */ + 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 { + atmel,pins = + <0 11 0x2 0x1 /* PA11 periph B with pullup */ + 0 12 0x2 0x1 /* PA12 periph B with pullup */ + 0 13 0x2 0x1 /* PA13 periph B with pullup */ + 0 14 0x2 0x1>; /* PA14 periph B with pullup */ + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffffa00 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; }; dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; }; @@ -155,6 +300,8 @@ interrupts = <5 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; }; @@ -164,6 +311,8 @@ interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; @@ -173,6 +322,8 @@ interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; }; @@ -182,6 +333,8 @@ interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; }; @@ -215,6 +368,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; gpios = <&pioD 5 0 &pioD 4 0 0 diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 912b2c283d6f..0376bf4fd66b 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -45,6 +45,28 @@ i2c1: i2c@f8014000 { status = "okay"; }; + + mmc0: mmc@f0008000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioA 7 0>; + }; + }; + + pinctrl@fffff400 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <0 7 0x0 0x5>; /* PA7 gpio CD pin pull up and deglitch */ + }; + }; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi new file mode 100644 index 000000000000..54eb33ba6d22 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x25.dtsi @@ -0,0 +1,49 @@ +/* + * at91sam9x25.dtsi - Device Tree Include file for AT91SAM9X25 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/include/ "at91sam9x5.dtsi" + +/ { + model = "Atmel AT91SAM9X25 SoC"; + compatible = "atmel, at91sam9x25, atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe03fff 0xc000001c /* pioA */ + 0x0007ffff 0x00047e3f 0x00000000 /* pioB */ + 0x80000000 0xfffd0000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + + macb1 { + pinctrl_macb1_rmii: macb1_rmii-0 { + atmel,pins = + <2 16 0x2 0x0 /* PC16 periph B */ + 2 18 0x2 0x0 /* PC18 periph B */ + 2 19 0x2 0x0 /* PC19 periph B */ + 2 20 0x2 0x0 /* PC20 periph B */ + 2 21 0x2 0x0 /* PC21 periph B */ + 2 27 0x2 0x0 /* PC27 periph B */ + 2 28 0x2 0x0 /* PC28 periph B */ + 2 29 0x2 0x0 /* PC29 periph B */ + 2 30 0x2 0x0 /* PC30 periph B */ + 2 31 0x2 0x0>; /* PC31 periph B */ + }; + }; + }; + + macb1: ethernet@f8030000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb1_rmii>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts new file mode 100644 index 000000000000..af907eaa1f25 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x25ek.dts @@ -0,0 +1,16 @@ +/* + * at91sam9x25ek.dts - Device Tree file for AT91SAM9X25-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9x25.dtsi" +/include/ "at91sam9x5ek.dtsi" + +/ { + model = "Atmel AT91SAM9G25-EK"; + compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; +}; diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi new file mode 100644 index 000000000000..fb102d6126ce --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x35.dtsi @@ -0,0 +1,28 @@ +/* + * at91sam9x35.dtsi - Device Tree Include file for AT91SAM9X35 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/include/ "at91sam9x5.dtsi" + +/ { + model = "Atmel AT91SAM9X35 SoC"; + compatible = "atmel, at91sam9x35, atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe03fff 0xc000000c /* pioA */ + 0x000406ff 0x00047e3f 0x00000000 /* pioB */ + 0xfdffffff 0x00000000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts new file mode 100644 index 000000000000..5ccb607b5414 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x35ek.dts @@ -0,0 +1,16 @@ +/* + * at91sam9x35ek.dts - Device Tree file for AT91SAM9X35-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9x35.dtsi" +/include/ "at91sam9x5ek.dtsi" + +/ { + model = "Atmel AT91SAM9X35-EK"; + compatible = "atmel,at91sam9x35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; +}; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 03fc136421c5..7ee49e8daf98 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -111,50 +111,244 @@ interrupts = <21 4 0>; }; - pioA: gpio@fffff400 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x800>; + + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <0 9 0x1 0x0 /* PA9 periph A */ + 0 10 0x1 0x1>; /* PA10 periph A with pullup */ + }; + }; - pioB: gpio@fffff600 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <0 0 0x1 0x1 /* PA0 periph A with pullup */ + 0 1 0x1 0x0>; /* PA1 periph A */ + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <0 2 0x1 0x0>; /* PA2 periph A */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <0 3 0x1 0x0>; /* PA3 periph A */ + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <0 5 0x1 0x1 /* PA5 periph A with pullup */ + 0 6 0x1 0x0>; /* PA6 periph A */ + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + <3 27 0x3 0x0>; /* PC27 periph C */ + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + <3 28 0x3 0x0>; /* PC28 periph C */ + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <0 7 0x1 0x1 /* PA7 periph A with pullup */ + 0 8 0x1 0x0>; /* PA8 periph A */ + }; + + pinctrl_uart2_rts: uart2_rts-0 { + atmel,pins = + <0 0 0x2 0x0>; /* PB0 periph B */ + }; + + pinctrl_uart2_cts: uart2_cts-0 { + atmel,pins = + <0 1 0x2 0x0>; /* PB1 periph B */ + }; + }; + + usart3 { + pinctrl_uart3: usart3-0 { + atmel,pins = + <3 23 0x2 0x1 /* PC22 periph B with pullup */ + 3 23 0x2 0x0>; /* PC23 periph B */ + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + <3 24 0x2 0x0>; /* PC24 periph B */ + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + <3 25 0x2 0x0>; /* PC25 periph B */ + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <3 8 0x3 0x0 /* PC8 periph C */ + 3 9 0x3 0x1>; /* PC9 periph C with pullup */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <3 16 0x3 0x0 /* PC16 periph C */ + 3 17 0x3 0x1>; /* PC17 periph C with pullup */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <3 4 0x0 0x1 /* PD5 gpio RDY pin pull_up */ + 3 5 0x0 0x1>; /* PD4 gpio enable pin pull_up */ + }; + }; + + macb0 { + pinctrl_macb0_rmii: macb0_rmii-0 { + atmel,pins = + <1 0 0x1 0x0 /* PB0 periph A */ + 1 1 0x1 0x0 /* PB1 periph A */ + 1 2 0x1 0x0 /* PB2 periph A */ + 1 3 0x1 0x0 /* PB3 periph A */ + 1 4 0x1 0x0 /* PB4 periph A */ + 1 5 0x1 0x0 /* PB5 periph A */ + 1 6 0x1 0x0 /* PB6 periph A */ + 1 7 0x1 0x0 /* PB7 periph A */ + 1 9 0x1 0x0 /* PB9 periph A */ + 1 10 0x1 0x0>; /* PB10 periph A */ + }; + + pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 { + atmel,pins = + <1 8 0x1 0x0 /* PA8 periph A */ + 1 11 0x1 0x0 /* PA11 periph A */ + 1 12 0x1 0x0 /* PA12 periph A */ + 1 13 0x1 0x0 /* PA13 periph A */ + 1 14 0x1 0x0 /* PA14 periph A */ + 1 15 0x1 0x0 /* PA15 periph A */ + 1 16 0x1 0x0 /* PA16 periph A */ + 1 17 0x1 0x0>; /* PA17 periph A */ + }; + }; + + mmc0 { + pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { + atmel,pins = + <0 17 0x1 0x0 /* PA17 periph A */ + 0 16 0x1 0x1 /* PA16 periph A with pullup */ + 0 15 0x1 0x1>; /* PA15 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <0 18 0x1 0x1 /* PA18 periph A with pullup */ + 0 19 0x1 0x1 /* PA19 periph A with pullup */ + 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + }; + }; + + mmc1 { + pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { + atmel,pins = + <0 13 0x2 0x0 /* PA13 periph B */ + 0 12 0x2 0x1 /* PA12 periph B with pullup */ + 0 11 0x2 0x1>; /* PA11 periph B with pullup */ + }; + + pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { + atmel,pins = + <0 2 0x2 0x1 /* PA2 periph B with pullup */ + 0 3 0x2 0x1 /* PA3 periph B with pullup */ + 0 4 0x2 0x1>; /* PA4 periph B with pullup */ + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + #gpio-lines = <19>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffffa00 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + #gpio-lines = <22>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; - pioC: gpio@fffff800 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + mmc0: mmc@f0008000 { + compatible = "atmel,hsmci"; + reg = <0xf0008000 0x600>; + interrupts = <12 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; - pioD: gpio@fffffa00 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + mmc1: mmc@f000c000 { + compatible = "atmel,hsmci"; + reg = <0xf000c000 0x600>; + interrupts = <26 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; }; @@ -164,6 +358,8 @@ interrupts = <5 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; }; @@ -173,6 +369,8 @@ interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; @@ -182,6 +380,8 @@ interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; }; @@ -189,6 +389,8 @@ compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf802c000 0x100>; interrupts = <24 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_rmii>; status = "disabled"; }; @@ -273,6 +475,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; gpios = <&pioD 5 0 &pioD 4 0 0 diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi new file mode 100644 index 000000000000..8a7cf1d9cf5d --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -0,0 +1,101 @@ +/* + * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/include/ "at91sam9x5cm.dtsi" + +/ { + model = "Atmel AT91SAM9X5-EK"; + compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; + + chosen { + bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; + }; + + ahb { + apb { + mmc0: mmc@f0008000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 15 0>; + }; + }; + + mmc1: mmc@f000c000 { + pinctrl-0 = < + &pinctrl_board_mmc1 + &pinctrl_mmc1_slot0_clk_cmd_dat0 + &pinctrl_mmc1_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 14 0>; + }; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + usart0: serial@f801c000 { + status = "okay"; + }; + + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + + i2c0: i2c@f8010000 { + status = "okay"; + }; + + i2c1: i2c@f8014000 { + status = "okay"; + }; + + i2c2: i2c@f8018000 { + status = "okay"; + }; + + pinctrl@fffff400 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <3 15 0x0 0x5>; /* PD15 gpio CD pin pull up and deglitch */ + }; + }; + + mmc1 { + pinctrl_board_mmc1: mmc1-board { + atmel,pins = + <3 14 0x0 0x5>; /* PD14 gpio CD pin pull up and deglitch */ + }; + }; + }; + }; + + usb0: ohci@00600000 { + status = "okay"; + num-ports = <2>; + atmel,vbus-gpio = <&pioD 19 1 + &pioD 20 1 + >; + }; + + usb1: ehci@00700000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 4b0e0ca08f40..731086b2fca2 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -203,6 +203,14 @@ reg = <0x80157450 0xC>; }; + thermal@801573c0 { + compatible = "stericsson,db8500-thermal"; + reg = <0x801573c0 0x40>; + interrupts = <21 0x4>, <22 0x4>; + interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH"; + status = "disabled"; + }; + db8500-prcmu-regulators { compatible = "stericsson,db8500-prcmu-regulator"; @@ -660,5 +668,11 @@ ranges = <0 0x50000000 0x4000000>; status = "disabled"; }; + + cpufreq-cooling { + compatible = "stericsson,db8500-cpufreq-cooling"; + status = "disabled"; + }; + }; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 55c57ea6169e..b4587b27ae42 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -799,6 +799,7 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006a000 0x2000>; interrupts = <112 70 71>; + fsl,auart-dma-channel = <8 9>; clocks = <&clks 45>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts new file mode 100644 index 000000000000..387fedb58988 --- /dev/null +++ b/arch/arm/boot/dts/pm9g45.dts @@ -0,0 +1,165 @@ +/* + * pm9g45.dts - Device Tree file for Ronetix pm9g45 board + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ +/dts-v1/; +/include/ "at91sam9g45.dtsi" + +/ { + model = "Ronetix pm9g45"; + compatible = "ronetix,pm9g45", "atmel,at91sam9g45", "atmel,at91sam9"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x70000000 0x8000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + dbgu: serial@ffffee00 { + status = "okay"; + }; + + pinctrl@fffff200 { + + board { + pinctrl_board_nand: nand0-board { + atmel,pins = + <3 3 0x0 0x1 /* PD3 gpio RDY pin pull_up*/ + 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + }; + }; + + mmc { + pinctrl_board_mmc: mmc0-board { + atmel,pins = + <3 6 0x0 0x5>; /* PD6 gpio CD pin pull_up and deglitch */ + }; + }; + }; + + mmc0: mmc@fff80000 { + pinctrl-0 = < + &pinctrl_board_mmc + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 6 0>; + }; + }; + + macb0: ethernet@fffbc000 { + phy-mode = "rmii"; + status = "okay"; + }; + + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + pinctrl-0 = <&pinctrl_board_nand>; + + gpios = <&pioD 3 0 + &pioC 14 0 + 0 + >; + + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x1A0000>; + }; + + kernel@200000 { + label = "bareboxenv2"; + reg = <0x200000 0x300000>; + }; + + kernel@500000 { + label = "root"; + reg = <0x500000 0x400000>; + }; + + data@900000 { + label = "data"; + reg = <0x900000 0x8340000>; + }; + }; + + usb0: ohci@00700000 { + status = "okay"; + num-ports = <2>; + }; + + usb1: ehci@00800000 { + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + led0 { + label = "led0"; + gpios = <&pioD 0 1>; + linux,default-trigger = "nand-disk"; + }; + + led1 { + label = "led1"; + gpios = <&pioD 31 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + right { + label = "SW4"; + gpios = <&pioE 7 1>; + linux,code = <106>; + }; + + up { + label = "SW3"; + gpios = <&pioE 8 1>; + linux,code = <103>; + }; + }; +}; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index 702c0baa6004..c6f85f0bc531 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -99,6 +99,33 @@ status = "okay"; }; + prcmu@80157000 { + thermal@801573c0 { + num-trips = <4>; + + trip0-temp = <70000>; + trip0-type = "active"; + trip0-cdev-num = <1>; + trip0-cdev-name0 = "thermal-cpufreq-0"; + + trip1-temp = <75000>; + trip1-type = "active"; + trip1-cdev-num = <1>; + trip1-cdev-name0 = "thermal-cpufreq-0"; + + trip2-temp = <80000>; + trip2-type = "active"; + trip2-cdev-num = <1>; + trip2-cdev-name0 = "thermal-cpufreq-0"; + + trip3-temp = <85000>; + trip3-type = "critical"; + trip3-cdev-num = <0>; + + status = "okay"; + }; + }; + external-bus@50000000 { status = "okay"; @@ -183,5 +210,9 @@ reg = <0x33>; }; }; + + cpufreq-cooling { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index dd4358bc26e2..2e4c5727468e 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -181,6 +181,10 @@ status = "okay"; }; + gpio@d8400000 { + status = "okay"; + }; + i2c0: i2c@e0280000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index 419ea7413d23..7cd25eb4f8e0 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -70,6 +70,12 @@ status = "disabled"; }; + pinmux: pinmux@e0700000 { + compatible = "st,spear1310-pinmux"; + reg = <0xe0700000 0x1000>; + #gpio-range-cells = <2>; + }; + spi1: spi@5d400000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x5d400000 0x1000>; @@ -179,6 +185,27 @@ thermal@e07008c4 { st,thermal-flags = <0x7000>; }; + + gpiopinctrl: gpio@d8400000 { + compatible = "st,spear-plgpio"; + reg = <0xd8400000 0x1000>; + interrupts = <0 100 0x4>; + #interrupt-cells = <1>; + interrupt-controller; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinmux 0 246>; + status = "disabled"; + + st-plgpio,ngpio = <246>; + st-plgpio,enb-reg = <0xd0>; + st-plgpio,wdata-reg = <0x90>; + st-plgpio,dir-reg = <0xb0>; + st-plgpio,ie-reg = <0x30>; + st-plgpio,rdata-reg = <0x70>; + st-plgpio,mis-reg = <0x10>; + st-plgpio,eit-reg = <0x50>; + }; }; }; }; diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index c9a54e06fb68..045f7123ffac 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -193,6 +193,10 @@ status = "okay"; }; + gpio@e2800000 { + status = "okay"; + }; + i2c0: i2c@e0280000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index d71fe2a68f09..6c09eb0a1b2b 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -24,6 +24,12 @@ status = "disabled"; }; + pinmux: pinmux@e0700000 { + compatible = "st,spear1340-pinmux"; + reg = <0xe0700000 0x1000>; + #gpio-range-cells = <2>; + }; + spi1: spi@5d400000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x5d400000 0x1000>; @@ -51,6 +57,26 @@ thermal@e07008c4 { st,thermal-flags = <0x2a00>; }; + + gpiopinctrl: gpio@e2800000 { + compatible = "st,spear-plgpio"; + reg = <0xe2800000 0x1000>; + interrupts = <0 107 0x4>; + #interrupt-cells = <1>; + interrupt-controller; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinmux 0 252>; + status = "disabled"; + + st-plgpio,ngpio = <250>; + st-plgpio,wdata-reg = <0x40>; + st-plgpio,dir-reg = <0x00>; + st-plgpio,ie-reg = <0x80>; + st-plgpio,rdata-reg = <0x20>; + st-plgpio,mis-reg = <0xa0>; + st-plgpio,eit-reg = <0x60>; + }; }; }; }; diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi index 62fc4fb3e5f9..930303e48df9 100644 --- a/arch/arm/boot/dts/spear310.dtsi +++ b/arch/arm/boot/dts/spear310.dtsi @@ -22,9 +22,10 @@ 0xb0000000 0xb0000000 0x10000000 0xd0000000 0xd0000000 0x30000000>; - pinmux@b4000000 { + pinmux: pinmux@b4000000 { compatible = "st,spear310-pinmux"; reg = <0xb4000000 0x1000>; + #gpio-range-cells = <2>; }; fsmc: flash@44000000 { @@ -75,6 +76,25 @@ reg = <0xb2200000 0x1000>; status = "disabled"; }; + + gpiopinctrl: gpio@b4000000 { + compatible = "st,spear-plgpio"; + reg = <0xb4000000 0x1000>; + #interrupt-cells = <1>; + interrupt-controller; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinmux 0 102>; + status = "disabled"; + + st-plgpio,ngpio = <102>; + st-plgpio,enb-reg = <0x10>; + st-plgpio,wdata-reg = <0x20>; + st-plgpio,dir-reg = <0x30>; + st-plgpio,ie-reg = <0x50>; + st-plgpio,rdata-reg = <0x40>; + st-plgpio,mis-reg = <0x60>; + }; }; }; }; diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index 082328bd64ab..ad4bfc68ee05 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -164,6 +164,10 @@ status = "okay"; }; + gpio@b3000000 { + status = "okay"; + }; + i2c0: i2c@d0180000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi index 1f49d69595a0..67d7ada71275 100644 --- a/arch/arm/boot/dts/spear320.dtsi +++ b/arch/arm/boot/dts/spear320.dtsi @@ -21,9 +21,10 @@ ranges = <0x40000000 0x40000000 0x80000000 0xd0000000 0xd0000000 0x30000000>; - pinmux@b3000000 { + pinmux: pinmux@b3000000 { compatible = "st,spear320-pinmux"; reg = <0xb3000000 0x1000>; + #gpio-range-cells = <2>; }; clcd@90000000 { @@ -90,6 +91,26 @@ reg = <0xa4000000 0x1000>; status = "disabled"; }; + + gpiopinctrl: gpio@b3000000 { + compatible = "st,spear-plgpio"; + reg = <0xb3000000 0x1000>; + #interrupt-cells = <1>; + interrupt-controller; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinmux 0 102>; + status = "disabled"; + + st-plgpio,ngpio = <102>; + st-plgpio,enb-reg = <0x24>; + st-plgpio,wdata-reg = <0x34>; + st-plgpio,dir-reg = <0x44>; + st-plgpio,ie-reg = <0x64>; + st-plgpio,rdata-reg = <0x54>; + st-plgpio,mis-reg = <0x84>; + st-plgpio,eit-reg = <0x94>; + }; }; }; }; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index f0ba901676ac..a20d4ff3fb3c 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -523,12 +523,12 @@ }; temperature-sensor@4c { - compatible = "nct1008"; + compatible = "onnn,nct1008"; reg = <0x4c>; }; magnetometer@c { - compatible = "ak8975"; + compatible = "ak,ak8975"; reg = <0xc>; interrupt-parent = <&gpio>; interrupts = <109 0x04>; /* gpio PN5 */ diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index b1497c7d7d68..df7f2270fc91 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -73,8 +73,8 @@ pinmux: pinmux { compatible = "nvidia,tegra30-pinmux"; - reg = <0x70000868 0xd0 /* Pad control registers */ - 0x70003000 0x3e0>; /* Mux registers */ + reg = <0x70000868 0xd4 /* Pad control registers */ + 0x70003000 0x3e4>; /* Mux registers */ }; serial@70006000 { diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c index df13a3ffff35..9d2d3ba339ff 100644 --- a/arch/arm/common/timer-sp.c +++ b/arch/arm/common/timer-sp.c @@ -162,7 +162,6 @@ static struct clock_event_device sp804_clockevent = { .set_mode = sp804_set_mode, .set_next_event = sp804_set_next_event, .rating = 300, - .cpumask = cpu_all_mask, }; static struct irqaction sp804_timer_irq = { @@ -185,6 +184,7 @@ void __init sp804_clockevents_init(void __iomem *base, unsigned int irq, clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ); evt->name = name; evt->irq = irq; + evt->cpumask = cpu_possible_mask; setup_irq(irq, &sp804_timer_irq); clockevents_config_and_register(evt, rate, 0xf, 0xffffffff); diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig index c285a9d777d9..a8dbc1e05253 100644 --- a/arch/arm/configs/afeb9260_defconfig +++ b/arch/arm/configs/afeb9260_defconfig @@ -79,7 +79,7 @@ CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_RTC_CLASS=y CONFIG_RTC_DEBUG=y diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 67bc571ed0c3..b175577d7abb 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -111,6 +111,7 @@ CONFIG_I2C=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y +CONFIG_PINCTRL_AT91=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_AT91SAM9X_WATCHDOG=y diff --git a/arch/arm/configs/at91sam9260_defconfig b/arch/arm/configs/at91sam9260_defconfig index 505b3765f87e..0ea5d2c97fc4 100644 --- a/arch/arm/configs/at91sam9260_defconfig +++ b/arch/arm/configs/at91sam9260_defconfig @@ -75,7 +75,7 @@ CONFIG_USB_STORAGE_DEBUG=y CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y diff --git a/arch/arm/configs/at91sam9261_defconfig b/arch/arm/configs/at91sam9261_defconfig index 1e8712ef062e..c87beb973b37 100644 --- a/arch/arm/configs/at91sam9261_defconfig +++ b/arch/arm/configs/at91sam9261_defconfig @@ -125,7 +125,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_ATMELMCI=m diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig index d2050cada82d..c5212f43eee6 100644 --- a/arch/arm/configs/at91sam9263_defconfig +++ b/arch/arm/configs/at91sam9263_defconfig @@ -133,7 +133,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_SDIO_UART=m diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig index e1b0e80b54a5..3b1881033ad8 100644 --- a/arch/arm/configs/at91sam9g20_defconfig +++ b/arch/arm/configs/at91sam9g20_defconfig @@ -96,7 +96,7 @@ CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_ATMELMCI=m diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index 4b8a25d9e686..1fd1d1de3220 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -218,7 +218,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_PXA=y diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 67b5abb6f857..4ea7c95719d2 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -144,7 +144,7 @@ CONFIG_USB_GADGET_DEBUG_FS=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m CONFIG_USB_CDC_COMPOSITE=m diff --git a/arch/arm/configs/h7202_defconfig b/arch/arm/configs/h7202_defconfig index 69405a762423..e16d3f372e2a 100644 --- a/arch/arm/configs/h7202_defconfig +++ b/arch/arm/configs/h7202_defconfig @@ -34,8 +34,7 @@ CONFIG_FB_MODE_HELPERS=y CONFIG_USB_GADGET=m CONFIG_USB_ZERO=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_FILE_STORAGE_TEST=y +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_EXT2_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index a691ef4c6008..557dd291288b 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -136,7 +136,7 @@ CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_CDC_COMPOSITE=m CONFIG_USB_GPIO_VBUS=y diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index 00630e6af45c..a07948a87caa 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -240,7 +240,7 @@ CONFIG_USB_GADGET_S3C2410=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_CDC_COMPOSITE=m CONFIG_MMC=y diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index dde2a1af7b39..42eab9a2a0fd 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -214,8 +214,7 @@ CONFIG_USB_TEST=y CONFIG_USB_GADGET=y CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_FILE_STORAGE_TEST=y +CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y diff --git a/arch/arm/configs/prima2_defconfig b/arch/arm/configs/prima2_defconfig index 807d4e2acb17..6a936c7c078a 100644 --- a/arch/arm/configs/prima2_defconfig +++ b/arch/arm/configs/prima2_defconfig @@ -37,7 +37,6 @@ CONFIG_SPI_SIRF=y CONFIG_SPI_SPIDEV=y # CONFIG_HWMON is not set CONFIG_USB_GADGET=y -CONFIG_USB_FILE_STORAGE=m CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y CONFIG_MMC_SDHCI=y diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index df77931a4326..2e0419d1b964 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -214,7 +214,7 @@ CONFIG_USB_GADGET_DUMMY_HCD=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_PXA=y diff --git a/arch/arm/configs/stamp9g20_defconfig b/arch/arm/configs/stamp9g20_defconfig index 52f1488591c7..b845f5519bcc 100644 --- a/arch/arm/configs/stamp9g20_defconfig +++ b/arch/arm/configs/stamp9g20_defconfig @@ -97,7 +97,7 @@ CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=m CONFIG_USB_ZERO=m CONFIG_USB_ETH=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_ATMELMCI=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index da6845493caa..250625d5223f 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -69,6 +69,8 @@ CONFIG_GPIO_TC3589X=y CONFIG_POWER_SUPPLY=y CONFIG_AB8500_BM=y CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y +CONFIG_THERMAL=y +CONFIG_CPU_THERMAL=y CONFIG_MFD_STMPE=y CONFIG_MFD_TC3589X=y CONFIG_AB5500_CORE=y diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index 1d01ddd33122..d36e0d3c86ec 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -139,7 +139,7 @@ CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_GADGET=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m CONFIG_RTC_CLASS=y diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig index 547a3c1e59db..731d4f985310 100644 --- a/arch/arm/configs/zeus_defconfig +++ b/arch/arm/configs/zeus_defconfig @@ -143,7 +143,7 @@ CONFIG_USB_GADGET=m CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m CONFIG_MMC=y diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index f70ae175a3d6..514e398f1a07 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -31,5 +31,6 @@ generic-y += sockios.h generic-y += termbits.h generic-y += termios.h generic-y += timex.h +generic-y += trace_clock.h generic-y += types.h generic-y += unaligned.h diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h index 6b9b077d86b3..afd7e916472f 100644 --- a/arch/arm/include/asm/hardware/sp810.h +++ b/arch/arm/include/asm/hardware/sp810.h @@ -56,6 +56,8 @@ #define SCCTRL_TIMEREN1SEL_REFCLK (0 << 17) #define SCCTRL_TIMEREN1SEL_TIMCLK (1 << 17) +#define SCCTRL_TIMERENnSEL_SHIFT(n) (15 + ((n) * 2)) + static inline void sysctl_soft_reset(void __iomem *base) { /* switch to slow mode */ diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 35c1ed89b936..652b56086de7 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -64,7 +64,7 @@ extern void __raw_readsl(const void __iomem *addr, void *data, int longlen); static inline void __raw_writew(u16 val, volatile void __iomem *addr) { asm volatile("strh %1, %0" - : "+Qo" (*(volatile u16 __force *)addr) + : "+Q" (*(volatile u16 __force *)addr) : "r" (val)); } @@ -72,7 +72,7 @@ static inline u16 __raw_readw(const volatile void __iomem *addr) { u16 val; asm volatile("ldrh %1, %0" - : "+Qo" (*(volatile u16 __force *)addr), + : "+Q" (*(volatile u16 __force *)addr), "=r" (val)); return val; } @@ -374,7 +374,7 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr); #ifdef CONFIG_MMU #define ARCH_HAS_VALID_PHYS_ADDR_RANGE -extern int valid_phys_addr_range(unsigned long addr, size_t size); +extern int valid_phys_addr_range(phys_addr_t addr, size_t size); extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size); extern int devmem_is_allowed(unsigned long pfn); #endif diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h index aeae9c609df4..6d65ba222db9 100644 --- a/arch/arm/include/asm/prom.h +++ b/arch/arm/include/asm/prom.h @@ -11,6 +11,8 @@ #ifndef __ASMARM_PROM_H #define __ASMARM_PROM_H +#define HAVE_ARCH_DEVTREE_FIXUPS + #ifdef CONFIG_OF extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys); diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h index 05b8e82ec9f5..e3f757263438 100644 --- a/arch/arm/include/asm/sched_clock.h +++ b/arch/arm/include/asm/sched_clock.h @@ -10,7 +10,5 @@ extern void sched_clock_postinit(void); extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate); -extern void setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, - unsigned long rate); #endif diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h index 6a6f1e485f41..301c1db3e99b 100644 --- a/arch/arm/include/asm/vfpmacros.h +++ b/arch/arm/include/asm/vfpmacros.h @@ -27,9 +27,9 @@ #if __LINUX_ARM_ARCH__ <= 6 ldr \tmp, =elf_hwcap @ may not have MVFR regs ldr \tmp, [\tmp, #0] - tst \tmp, #HWCAP_VFPv3D16 - ldceql p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} - addne \base, \base, #32*4 @ step over unused register space + tst \tmp, #HWCAP_VFPD32 + ldcnel p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} + addeq \base, \base, #32*4 @ step over unused register space #else VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field @@ -51,9 +51,9 @@ #if __LINUX_ARM_ARCH__ <= 6 ldr \tmp, =elf_hwcap @ may not have MVFR regs ldr \tmp, [\tmp, #0] - tst \tmp, #HWCAP_VFPv3D16 - stceql p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} - addne \base, \base, #32*4 @ step over unused register space + tst \tmp, #HWCAP_VFPD32 + stcnel p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} + addeq \base, \base, #32*4 @ step over unused register space #else VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field diff --git a/arch/arm/include/uapi/asm/hwcap.h b/arch/arm/include/uapi/asm/hwcap.h index f254f6503cce..3688fd15a32d 100644 --- a/arch/arm/include/uapi/asm/hwcap.h +++ b/arch/arm/include/uapi/asm/hwcap.h @@ -18,11 +18,12 @@ #define HWCAP_THUMBEE (1 << 11) #define HWCAP_NEON (1 << 12) #define HWCAP_VFPv3 (1 << 13) -#define HWCAP_VFPv3D16 (1 << 14) +#define HWCAP_VFPv3D16 (1 << 14) /* also set for VFPv4-D16 */ #define HWCAP_TLS (1 << 15) #define HWCAP_VFPv4 (1 << 16) #define HWCAP_IDIVA (1 << 17) #define HWCAP_IDIVT (1 << 18) +#define HWCAP_VFPD32 (1 << 19) /* set if VFP has 32 regs (not 16) */ #define HWCAP_IDIV (HWCAP_IDIVA | HWCAP_IDIVT) diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index e21bac20d90d..fc6692e2b603 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -107,13 +107,6 @@ static void sched_clock_poll(unsigned long wrap_ticks) update_sched_clock(); } -void __init setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, - unsigned long rate) -{ - setup_sched_clock(read, bits, rate); - cd.needs_suspend = true; -} - void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) { unsigned long r, w; @@ -189,18 +182,15 @@ void __init sched_clock_postinit(void) static int sched_clock_suspend(void) { sched_clock_poll(sched_clock_timer.data); - if (cd.needs_suspend) - cd.suspended = true; + cd.suspended = true; return 0; } static void sched_clock_resume(void) { - if (cd.needs_suspend) { - cd.epoch_cyc = read_sched_clock(); - cd.epoch_cyc_copy = cd.epoch_cyc; - cd.suspended = false; - } + cd.epoch_cyc = read_sched_clock(); + cd.epoch_cyc_copy = cd.epoch_cyc; + cd.suspended = false; } static struct syscore_ops sched_clock_ops = { diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 043624219b55..e34c1bdb804d 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -494,8 +494,17 @@ endif comment "Generic Board Type" +config MACH_AT91RM9200_DT + bool "Atmel AT91RM9200 Evaluation Kits with device-tree support" + depends on SOC_AT91RM9200 + select USE_OF + help + Select this if you want to experiment device-tree with + an Atmel RM9200 Evaluation Kit. + config MACH_AT91SAM_DT bool "Atmel AT91SAM Evaluation Kits with device-tree support" + depends on SOC_AT91SAM9 select USE_OF help Select this if you want to experiment device-tree with diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 3bb7a51efc9d..b38a1dcb79b8 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -88,6 +88,7 @@ obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o # AT91SAM board with device-tree +obj-$(CONFIG_MACH_AT91RM9200_DT) += board-rm9200-dt.o obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o # AT91X40 board-specific support diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 5269825194a8..6cceb42a4c33 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -194,6 +194,24 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), CLKDEV_CON_ID("pioD", &pioD_clk), + /* usart lookup table for DT entries */ + CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), + CLKDEV_CON_DEV_ID("usart", "fffc0000.serial", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "fffc4000.serial", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "fffc8000.serial", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "fffcc000.serial", &usart3_clk), + /* tc lookup table for DT entries */ + CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk), + CLKDEV_CON_DEV_ID("t0_clk", "fffa4000.timer", &tc3_clk), + CLKDEV_CON_DEV_ID("t1_clk", "fffa4000.timer", &tc4_clk), + CLKDEV_CON_DEV_ID("t2_clk", "fffa4000.timer", &tc5_clk), + CLKDEV_CON_DEV_ID("hclk", "300000.ohci", &ohci_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -361,10 +379,10 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { 0 /* Advanced Interrupt Controller (IRQ6) */ }; -struct at91_init_soc __initdata at91rm9200_soc = { +AT91_SOC_START(rm9200) .map_io = at91rm9200_map_io, .default_irq_priority = at91rm9200_default_irq_priority, .ioremap_registers = at91rm9200_ioremap_registers, .register_clocks = at91rm9200_register_clocks, .init = at91rm9200_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 1e122bcd7845..3cee0e6ea7c3 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -68,7 +68,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable overcurrent notification */ for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) + if (gpio_is_valid(data->overcurrent_pin[i])) at91_set_gpio_input(data->overcurrent_pin[i], 1); } diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index aaa443b48c91..cafe98836c8a 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -24,6 +24,9 @@ #include <linux/irq.h> #include <linux/clockchips.h> #include <linux/export.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <asm/mach/time.h> @@ -91,7 +94,8 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id) static struct irqaction at91rm9200_timer_irq = { .name = "at91_tick", .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = at91rm9200_timer_interrupt + .handler = at91rm9200_timer_interrupt, + .irq = NR_IRQS_LEGACY + AT91_ID_SYS, }; static cycle_t read_clk32k(struct clocksource *cs) @@ -179,8 +183,60 @@ static struct clock_event_device clkevt = { void __iomem *at91_st_base; EXPORT_SYMBOL_GPL(at91_st_base); +#ifdef CONFIG_OF +static struct of_device_id at91rm9200_st_timer_ids[] = { + { .compatible = "atmel,at91rm9200-st" }, + { /* sentinel */ } +}; + +static int __init of_at91rm9200_st_init(void) +{ + struct device_node *np; + int ret; + + np = of_find_matching_node(NULL, at91rm9200_st_timer_ids); + if (!np) + goto err; + + at91_st_base = of_iomap(np, 0); + if (!at91_st_base) + goto node_err; + + /* Get the interrupts property */ + ret = irq_of_parse_and_map(np, 0); + if (!ret) + goto ioremap_err; + at91rm9200_timer_irq.irq = ret; + + of_node_put(np); + + return 0; + +ioremap_err: + iounmap(at91_st_base); +node_err: + of_node_put(np); +err: + return -EINVAL; +} +#else +static int __init of_at91rm9200_st_init(void) +{ + return -EINVAL; +} +#endif + void __init at91rm9200_ioremap_st(u32 addr) { +#ifdef CONFIG_OF + struct device_node *np; + + np = of_find_matching_node(NULL, at91rm9200_st_timer_ids); + if (np) { + of_node_put(np); + return; + } +#endif at91_st_base = ioremap(addr, 256); if (!at91_st_base) panic("Impossible to ioremap ST\n"); @@ -191,13 +247,16 @@ void __init at91rm9200_ioremap_st(u32 addr) */ void __init at91rm9200_timer_init(void) { + /* For device tree enabled device: initialize here */ + of_at91rm9200_st_init(); + /* Disable all timer interrupts, and clear any pending ones */ at91_st_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS); at91_st_read(AT91_ST_SR); /* Make IRQs happen for the system timer */ - setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq); + setup_irq(at91rm9200_timer_irq.irq, &at91rm9200_timer_irq); /* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used * directly for the clocksource and all clockevents, after adjusting diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index f8202615f4a8..c9e029e44d8a 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -230,11 +230,15 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t1_clk", "fffdc000.timer", &tc4_clk), CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk), CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -390,10 +394,10 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -struct at91_init_soc __initdata at91sam9260_soc = { +AT91_SOC_START(sam9260) .map_io = at91sam9260_map_io, .default_irq_priority = at91sam9260_default_irq_priority, .ioremap_registers = at91sam9260_ioremap_registers, .register_clocks = at91sam9260_register_clocks, .init = at91sam9260_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index aa1e58729885..414bd855fb0c 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -72,7 +72,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable overcurrent notification */ for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) + if (gpio_is_valid(data->overcurrent_pin[i])) at91_set_gpio_input(data->overcurrent_pin[i], 1); } diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 04295c04b3e0..4d262f346fd9 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -334,10 +334,10 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -struct at91_init_soc __initdata at91sam9261_soc = { +AT91_SOC_START(sam9261) .map_io = at91sam9261_map_io, .default_irq_priority = at91sam9261_default_irq_priority, .ioremap_registers = at91sam9261_ioremap_registers, .register_clocks = at91sam9261_register_clocks, .init = at91sam9261_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index b9487696b7be..cd604aad8e96 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -72,7 +72,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable overcurrent notification */ for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) + if (gpio_is_valid(data->overcurrent_pin[i])) at91_set_gpio_input(data->overcurrent_pin[i], 1); } diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index d6f9c23927c4..ed390f6fa232 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -211,7 +211,14 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("hclk", "a00000.ohci", &ohci_clk), CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fff80000.mmc", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fff84000.mmc", &mmc1_clk), CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioCDE_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCDE_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCDE_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -365,10 +372,10 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ1) */ }; -struct at91_init_soc __initdata at91sam9263_soc = { +AT91_SOC_START(sam9263) .map_io = at91sam9263_map_io, .default_irq_priority = at91sam9263_default_irq_priority, .ioremap_registers = at91sam9263_ioremap_registers, .register_clocks = at91sam9263_register_clocks, .init = at91sam9263_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index cb85da2eccea..9c61e59a2104 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -78,7 +78,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable overcurrent notification */ for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) + if (gpio_is_valid(data->overcurrent_pin[i])) at91_set_gpio_input(data->overcurrent_pin[i], 1); } diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 84af1b506d92..c5c2acc4bf22 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -256,10 +256,18 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk), CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk), CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fff80000.mmc", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fffd0000.mmc", &mmc1_clk), CLKDEV_CON_DEV_ID(NULL, "fff84000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi1_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioC_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioDE_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioDE_clk), + CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), @@ -409,10 +417,10 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ0) */ }; -struct at91_init_soc __initdata at91sam9g45_soc = { +AT91_SOC_START(sam9g45) .map_io = at91sam9g45_map_io, .default_irq_priority = at91sam9g45_default_irq_priority, .ioremap_registers = at91sam9g45_ioremap_registers, .register_clocks = at91sam9g45_register_clocks, .init = at91sam9g45_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index b1596072dcc2..fcd233cb33d2 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1841,8 +1841,8 @@ static struct resource sha_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_AESTDESSHA, - .end = AT91SAM9G45_ID_AESTDESSHA, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, .flags = IORESOURCE_IRQ, }, }; @@ -1874,8 +1874,8 @@ static struct resource tdes_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_AESTDESSHA, - .end = AT91SAM9G45_ID_AESTDESSHA, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, .flags = IORESOURCE_IRQ, }, }; @@ -1910,8 +1910,8 @@ static struct resource aes_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_AESTDESSHA, - .end = AT91SAM9G45_ID_AESTDESSHA, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index 732d3d3f4ec5..70b3a99244ab 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -168,13 +168,14 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk), CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb_clk), CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb_clk), + CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk), CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), - CLKDEV_CON_ID("pioA", &pioAB_clk), - CLKDEV_CON_ID("pioB", &pioAB_clk), - CLKDEV_CON_ID("pioC", &pioCD_clk), - CLKDEV_CON_ID("pioD", &pioCD_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCD_clk), /* additional fake clock for macb_hclk */ CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &uhp_clk), CLKDEV_CON_DEV_ID("ohci_clk", "500000.ohci", &uhp_clk), @@ -223,13 +224,10 @@ static void __init at91sam9n12_map_io(void) void __init at91sam9n12_initialize(void) { at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0); - - /* Register GPIO subsystem (using DT) */ - at91_gpio_init(NULL, 0); } -struct at91_init_soc __initdata at91sam9n12_soc = { +AT91_SOC_START(sam9n12) .map_io = at91sam9n12_map_io, .register_clocks = at91sam9n12_register_clocks, .init = at91sam9n12_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 72e908412222..cbe72e44c13f 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -338,10 +338,10 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -struct at91_init_soc __initdata at91sam9rl_soc = { +AT91_SOC_START(sam9rl) .map_io = at91sam9rl_map_io, .default_irq_priority = at91sam9rl_default_irq_priority, .ioremap_registers = at91sam9rl_ioremap_registers, .register_clocks = at91sam9rl_register_clocks, .init = at91sam9rl_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index e5035380dcbc..3c729f0e2d3c 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -229,15 +229,17 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk), CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk), CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "f000c000.mmc", &mmc1_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk), CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), CLKDEV_CON_DEV_ID(NULL, "f8018000.i2c", &twi2_clk), - CLKDEV_CON_ID("pioA", &pioAB_clk), - CLKDEV_CON_ID("pioB", &pioAB_clk), - CLKDEV_CON_ID("pioC", &pioCD_clk), - CLKDEV_CON_ID("pioD", &pioCD_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCD_clk), /* additional fake clock for macb_hclk */ CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb0_clk), CLKDEV_CON_DEV_ID("hclk", "f8030000.ethernet", &macb1_clk), @@ -313,18 +315,11 @@ static void __init at91sam9x5_map_io(void) at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE); } -void __init at91sam9x5_initialize(void) -{ - /* Register GPIO subsystem (using DT) */ - at91_gpio_init(NULL, 0); -} - /* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ -struct at91_init_soc __initdata at91sam9x5_soc = { +AT91_SOC_START(sam9x5) .map_io = at91sam9x5_map_io, .register_clocks = at91sam9x5_register_clocks, - .init = at91sam9x5_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c index e8f45c4e0ea8..3b6a94820fa0 100644 --- a/arch/arm/mach-at91/board-dt.c +++ b/arch/arm/mach-at91/board-dt.c @@ -30,8 +30,6 @@ static const struct of_device_id irq_of_match[] __initconst = { { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init }, - { .compatible = "atmel,at91rm9200-gpio", .data = at91_gpio_of_irq_setup }, - { .compatible = "atmel,at91sam9x5-gpio", .data = at91_gpio_of_irq_setup }, { /*sentinel*/ } }; diff --git a/arch/arm/mach-at91/board-rm9200-dt.c b/arch/arm/mach-at91/board-rm9200-dt.c new file mode 100644 index 000000000000..5f9ce3da3fde --- /dev/null +++ b/arch/arm/mach-at91/board-rm9200-dt.c @@ -0,0 +1,57 @@ +/* + * Setup code for AT91RM9200 Evaluation Kits with Device Tree support + * + * Copyright (C) 2011 Atmel, + * 2011 Nicolas Ferre <nicolas.ferre@atmel.com> + * 2012 Joachim Eastwood <manabian@gmail.com> + * + * Licensed under GPLv2 or later. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> + +#include <asm/setup.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include "at91_aic.h" +#include "generic.h" + + +static const struct of_device_id irq_of_match[] __initconst = { + { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init }, + { /*sentinel*/ } +}; + +static void __init at91rm9200_dt_init_irq(void) +{ + of_irq_init(irq_of_match); +} + +static void __init at91rm9200_dt_device_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char *at91rm9200_dt_board_compat[] __initdata = { + "atmel,at91rm9200", + NULL +}; + +DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)") + .timer = &at91rm9200_timer, + .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, + .init_early = at91rm9200_dt_initialize, + .init_irq = at91rm9200_dt_init_irq, + .init_machine = at91rm9200_dt_device_init, + .dt_compat = at91rm9200_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index b62f560e6c75..fc593d615e7d 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -20,6 +20,7 @@ extern void __init at91_init_sram(int bank, unsigned long base, extern void __init at91rm9200_set_type(int type); extern void __init at91_initialize(unsigned long main_clock); extern void __init at91x40_initialize(unsigned long main_clock); +extern void __init at91rm9200_dt_initialize(void); extern void __init at91_dt_initialize(void); /* Interrupts */ diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index be42cf0e74bd..c5d7e1e9d757 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -23,8 +23,6 @@ #include <linux/io.h> #include <linux/irqdomain.h> #include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/of_gpio.h> #include <asm/mach/irq.h> @@ -33,6 +31,8 @@ #include "generic.h" +#define MAX_NB_GPIO_PER_BANK 32 + struct at91_gpio_chip { struct gpio_chip chip; struct at91_gpio_chip *next; /* Bank sharing same clock */ @@ -46,6 +46,7 @@ struct at91_gpio_chip { #define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip) +static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset); static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip); static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val); static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset); @@ -55,26 +56,27 @@ static int at91_gpiolib_direction_input(struct gpio_chip *chip, unsigned offset); static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset); -#define AT91_GPIO_CHIP(name, nr_gpio) \ +#define AT91_GPIO_CHIP(name) \ { \ .chip = { \ .label = name, \ + .request = at91_gpiolib_request, \ .direction_input = at91_gpiolib_direction_input, \ .direction_output = at91_gpiolib_direction_output, \ .get = at91_gpiolib_get, \ .set = at91_gpiolib_set, \ .dbg_show = at91_gpiolib_dbg_show, \ .to_irq = at91_gpiolib_to_irq, \ - .ngpio = nr_gpio, \ + .ngpio = MAX_NB_GPIO_PER_BANK, \ }, \ } static struct at91_gpio_chip gpio_chip[] = { - AT91_GPIO_CHIP("pioA", 32), - AT91_GPIO_CHIP("pioB", 32), - AT91_GPIO_CHIP("pioC", 32), - AT91_GPIO_CHIP("pioD", 32), - AT91_GPIO_CHIP("pioE", 32), + AT91_GPIO_CHIP("pioA"), + AT91_GPIO_CHIP("pioB"), + AT91_GPIO_CHIP("pioC"), + AT91_GPIO_CHIP("pioD"), + AT91_GPIO_CHIP("pioE"), }; static int gpio_banks; @@ -89,7 +91,7 @@ static unsigned long at91_gpio_caps; static inline void __iomem *pin_to_controller(unsigned pin) { - pin /= 32; + pin /= MAX_NB_GPIO_PER_BANK; if (likely(pin < gpio_banks)) return gpio_chip[pin].regbase; @@ -98,7 +100,7 @@ static inline void __iomem *pin_to_controller(unsigned pin) static inline unsigned pin_to_mask(unsigned pin) { - return 1 << (pin % 32); + return 1 << (pin % MAX_NB_GPIO_PER_BANK); } @@ -713,80 +715,6 @@ postcore_initcall(at91_gpio_debugfs_init); */ static struct lock_class_key gpio_lock_class; -#if defined(CONFIG_OF) -static int at91_gpio_irq_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - struct at91_gpio_chip *at91_gpio = h->host_data; - - irq_set_lockdep_class(virq, &gpio_lock_class); - - /* - * Can use the "simple" and not "edge" handler since it's - * shorter, and the AIC handles interrupts sanely. - */ - irq_set_chip_and_handler(virq, &gpio_irqchip, - handle_simple_irq); - set_irq_flags(virq, IRQF_VALID); - irq_set_chip_data(virq, at91_gpio); - - return 0; -} - -static struct irq_domain_ops at91_gpio_ops = { - .map = at91_gpio_irq_map, - .xlate = irq_domain_xlate_twocell, -}; - -int __init at91_gpio_of_irq_setup(struct device_node *node, - struct device_node *parent) -{ - struct at91_gpio_chip *prev = NULL; - int alias_idx = of_alias_get_id(node, "gpio"); - struct at91_gpio_chip *at91_gpio = &gpio_chip[alias_idx]; - - /* Setup proper .irq_set_type function */ - if (has_pio3()) - gpio_irqchip.irq_set_type = alt_gpio_irq_type; - else - gpio_irqchip.irq_set_type = gpio_irq_type; - - /* Disable irqs of this PIO controller */ - __raw_writel(~0, at91_gpio->regbase + PIO_IDR); - - /* Setup irq domain */ - at91_gpio->domain = irq_domain_add_linear(node, at91_gpio->chip.ngpio, - &at91_gpio_ops, at91_gpio); - if (!at91_gpio->domain) - panic("at91_gpio.%d: couldn't allocate irq domain (DT).\n", - at91_gpio->pioc_idx); - - /* Setup chained handler */ - if (at91_gpio->pioc_idx) - prev = &gpio_chip[at91_gpio->pioc_idx - 1]; - - /* The toplevel handler handles one bank of GPIOs, except - * on some SoC it can handles up to three... - * We only set up the handler for the first of the list. - */ - if (prev && prev->next == at91_gpio) - return 0; - - at91_gpio->pioc_virq = irq_create_mapping(irq_find_host(parent), - at91_gpio->pioc_hwirq); - irq_set_chip_data(at91_gpio->pioc_virq, at91_gpio); - irq_set_chained_handler(at91_gpio->pioc_virq, gpio_irq_handler); - - return 0; -} -#else -int __init at91_gpio_of_irq_setup(struct device_node *node, - struct device_node *parent) -{ - return -EINVAL; -} -#endif - /* * irqdomain initialization: pile up irqdomains on top of AIC range */ @@ -862,6 +790,16 @@ void __init at91_gpio_irq_setup(void) } /* gpiolib support */ +static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset) +{ + struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); + void __iomem *pio = at91_gpio->regbase; + unsigned mask = 1 << offset; + + __raw_writel(mask, pio + PIO_PER); + return 0; +} + static int at91_gpiolib_direction_input(struct gpio_chip *chip, unsigned offset) { @@ -975,81 +913,11 @@ err: return -EINVAL; } -#ifdef CONFIG_OF_GPIO -static void __init of_at91_gpio_init_one(struct device_node *np) -{ - int alias_idx; - struct at91_gpio_chip *at91_gpio; - - if (!np) - return; - - alias_idx = of_alias_get_id(np, "gpio"); - if (alias_idx >= MAX_GPIO_BANKS) { - pr_err("at91_gpio, failed alias idx(%d) > MAX_GPIO_BANKS(%d), ignoring.\n", - alias_idx, MAX_GPIO_BANKS); - return; - } - - at91_gpio = &gpio_chip[alias_idx]; - at91_gpio->chip.base = alias_idx * at91_gpio->chip.ngpio; - - at91_gpio->regbase = of_iomap(np, 0); - if (!at91_gpio->regbase) { - pr_err("at91_gpio.%d, failed to map registers, ignoring.\n", - alias_idx); - return; - } - - /* Get the interrupts property */ - if (of_property_read_u32(np, "interrupts", &at91_gpio->pioc_hwirq)) { - pr_err("at91_gpio.%d, failed to get interrupts property, ignoring.\n", - alias_idx); - goto ioremap_err; - } - - /* Get capabilities from compatibility property */ - if (of_device_is_compatible(np, "atmel,at91sam9x5-gpio")) - at91_gpio_caps |= AT91_GPIO_CAP_PIO3; - - /* Setup clock */ - if (at91_gpio_setup_clk(alias_idx)) - goto ioremap_err; - - at91_gpio->chip.of_node = np; - gpio_banks = max(gpio_banks, alias_idx + 1); - at91_gpio->pioc_idx = alias_idx; - return; - -ioremap_err: - iounmap(at91_gpio->regbase); -} - -static int __init of_at91_gpio_init(void) -{ - struct device_node *np = NULL; - - /* - * This isn't ideal, but it gets things hooked up until this - * driver is converted into a platform_device - */ - for_each_compatible_node(np, NULL, "atmel,at91rm9200-gpio") - of_at91_gpio_init_one(np); - - return gpio_banks > 0 ? 0 : -EINVAL; -} -#else -static int __init of_at91_gpio_init(void) -{ - return -EINVAL; -} -#endif - static void __init at91_gpio_init_one(int idx, u32 regbase, int pioc_hwirq) { struct at91_gpio_chip *at91_gpio = &gpio_chip[idx]; - at91_gpio->chip.base = idx * at91_gpio->chip.ngpio; + at91_gpio->chip.base = idx * MAX_NB_GPIO_PER_BANK; at91_gpio->pioc_hwirq = pioc_hwirq; at91_gpio->pioc_idx = idx; @@ -1079,11 +947,11 @@ void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks) BUG_ON(nr_banks > MAX_GPIO_BANKS); - if (of_at91_gpio_init() < 0) { - /* No GPIO controller found in device tree */ - for (i = 0; i < nr_banks; i++) - at91_gpio_init_one(i, data[i].regbase, data[i].id); - } + if (of_have_populated_dt()) + return; + + for (i = 0; i < nr_banks; i++) + at91_gpio_init_one(i, data[i].regbase, data[i].id); for (i = 0; i < gpio_banks; i++) { at91_gpio = &gpio_chip[i]; diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index c55a4364ffb4..a0d92a960f46 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -70,16 +70,6 @@ struct at91_cf_data { extern void __init at91_add_device_cf(struct at91_cf_data *data); /* MMC / SD */ - /* at91_mci platform config */ -struct at91_mmc_data { - int det_pin; /* card detect IRQ */ - unsigned slot_b:1; /* uses Slot B */ - unsigned wire4:1; /* (SD) supports DAT0..DAT3 */ - int wp_pin; /* (SD) writeprotect detect */ - int vcc_pin; /* power switching (high == on) */ -}; -extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data); - /* atmel-mci platform config */ extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data); diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 0b32c81730a5..19cdd0b5b391 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -10,6 +10,7 @@ #include <linux/mm.h> #include <linux/pm.h> #include <linux/of_address.h> +#include <linux/pinctrl/machine.h> #include <asm/system_misc.h> #include <asm/mach/map.h> @@ -338,6 +339,7 @@ static void at91_dt_rstc(void) } static struct of_device_id ramc_ids[] = { + { .compatible = "atmel,at91rm9200-sdramc" }, { .compatible = "atmel,at91sam9260-sdramc" }, { .compatible = "atmel,at91sam9g45-ddramc" }, { /*sentinel*/ } @@ -436,6 +438,19 @@ end: of_node_put(np); } +void __init at91rm9200_dt_initialize(void) +{ + at91_dt_ramc(); + + /* Init clock subsystem */ + at91_dt_clock_init(); + + /* Register the processor-specific clocks */ + at91_boot_soc.register_clocks(); + + at91_boot_soc.init(); +} + void __init at91_dt_initialize(void) { at91_dt_rstc(); @@ -448,7 +463,8 @@ void __init at91_dt_initialize(void) /* Register the processor-specific clocks */ at91_boot_soc.register_clocks(); - at91_boot_soc.init(); + if (at91_boot_soc.init) + at91_boot_soc.init(); } #endif @@ -463,4 +479,6 @@ void __init at91_initialize(unsigned long main_clock) at91_boot_soc.register_clocks(); at91_boot_soc.init(); + + pinctrl_provide_dummies(); } diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h index a9cfeb153719..9c6d3d4f9a23 100644 --- a/arch/arm/mach-at91/soc.h +++ b/arch/arm/mach-at91/soc.h @@ -5,6 +5,7 @@ */ struct at91_init_soc { + int builtin; unsigned int *default_irq_priority; void (*map_io)(void); void (*ioremap_registers)(void); @@ -22,9 +23,18 @@ extern struct at91_init_soc at91sam9rl_soc; extern struct at91_init_soc at91sam9x5_soc; extern struct at91_init_soc at91sam9n12_soc; +#define AT91_SOC_START(_name) \ +struct at91_init_soc __initdata at91##_name##_soc \ + __used \ + = { \ + .builtin = 1, \ + +#define AT91_SOC_END \ +}; + static inline int at91_soc_is_enabled(void) { - return at91_boot_soc.init != NULL; + return at91_boot_soc.builtin; } #if !defined(CONFIG_SOC_AT91RM9200) diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c index 2c5fb4c7e509..ae305397003c 100644 --- a/arch/arm/mach-cns3xxx/cns3420vb.c +++ b/arch/arm/mach-cns3xxx/cns3420vb.c @@ -24,6 +24,8 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/physmap.h> #include <linux/mtd/partitions.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/usb/ohci_pdriver.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/hardware/gic.h> @@ -32,6 +34,7 @@ #include <asm/mach/time.h> #include <mach/cns3xxx.h> #include <mach/irqs.h> +#include <mach/pm.h> #include "core.h" #include "devices.h" @@ -125,13 +128,52 @@ static struct resource cns3xxx_usb_ehci_resources[] = { static u64 cns3xxx_usb_ehci_dma_mask = DMA_BIT_MASK(32); +static int csn3xxx_usb_power_on(struct platform_device *pdev) +{ + /* + * EHCI and OHCI share the same clock and power, + * resetting twice would cause the 1st controller been reset. + * Therefore only do power up at the first up device, and + * power down at the last down device. + * + * Set USB AHB INCR length to 16 + */ + if (atomic_inc_return(&usb_pwr_ref) == 1) { + cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB); + cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST); + cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST); + __raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)), + MISC_CHIP_CONFIG_REG); + } + + return 0; +} + +static void csn3xxx_usb_power_off(struct platform_device *pdev) +{ + /* + * EHCI and OHCI share the same clock and power, + * resetting twice would cause the 1st controller been reset. + * Therefore only do power up at the first up device, and + * power down at the last down device. + */ + if (atomic_dec_return(&usb_pwr_ref) == 0) + cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST); +} + +static struct usb_ehci_pdata cns3xxx_usb_ehci_pdata = { + .power_on = csn3xxx_usb_power_on, + .power_off = csn3xxx_usb_power_off, +}; + static struct platform_device cns3xxx_usb_ehci_device = { - .name = "cns3xxx-ehci", + .name = "ehci-platform", .num_resources = ARRAY_SIZE(cns3xxx_usb_ehci_resources), .resource = cns3xxx_usb_ehci_resources, .dev = { .dma_mask = &cns3xxx_usb_ehci_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &cns3xxx_usb_ehci_pdata, }, }; @@ -149,13 +191,20 @@ static struct resource cns3xxx_usb_ohci_resources[] = { static u64 cns3xxx_usb_ohci_dma_mask = DMA_BIT_MASK(32); +static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = { + .num_ports = 1, + .power_on = csn3xxx_usb_power_on, + .power_off = csn3xxx_usb_power_off, +}; + static struct platform_device cns3xxx_usb_ohci_device = { - .name = "cns3xxx-ohci", + .name = "ohci-platform", .num_resources = ARRAY_SIZE(cns3xxx_usb_ohci_resources), .resource = cns3xxx_usb_ohci_resources, .dev = { .dma_mask = &cns3xxx_usb_ohci_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &cns3xxx_usb_ohci_pdata, }, }; diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index cd0c8b1e1ecf..14e9947bad6e 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -713,8 +713,7 @@ static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type, break; case VPBE_ENC_CUSTOM_TIMINGS: if (pclock <= 27000000) { - v |= DM644X_VPSS_MUXSEL_PLL2_MODE | - DM644X_VPSS_DACCLKEN; + v |= DM644X_VPSS_DACCLKEN; writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL)); } else { /* diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h index 7bcd0dfce4b1..b47f75038686 100644 --- a/arch/arm/mach-dove/include/mach/pm.h +++ b/arch/arm/mach-dove/include/mach/pm.h @@ -63,7 +63,7 @@ static inline int pmu_to_irq(int pin) static inline int irq_to_pmu(int irq) { - if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS) + if (IRQ_DOVE_PMU_START <= irq && irq < NR_IRQS) return irq - IRQ_DOVE_PMU_START; return -EINVAL; diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index 087711524e8a..bc4344aa1009 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -46,8 +46,20 @@ static void pmu_irq_ack(struct irq_data *d) int pin = irq_to_pmu(d->irq); u32 u; + /* + * The PMU mask register is not RW0C: it is RW. This means that + * the bits take whatever value is written to them; if you write + * a '1', you will set the interrupt. + * + * Unfortunately this means there is NO race free way to clear + * these interrupts. + * + * So, let's structure the code so that the window is as small as + * possible. + */ u = ~(1 << (pin & 31)); - writel(u, PMU_INTERRUPT_CAUSE); + u &= readl_relaxed(PMU_INTERRUPT_CAUSE); + writel_relaxed(u, PMU_INTERRUPT_CAUSE); } static struct irq_chip pmu_irq_chip = { diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c index 21d568b3b149..87e07d6fc615 100644 --- a/arch/arm/mach-exynos/dma.c +++ b/arch/arm/mach-exynos/dma.c @@ -275,6 +275,9 @@ static int __init exynos_dma_init(void) exynos_pdma1_pdata.nr_valid_peri = ARRAY_SIZE(exynos4210_pdma1_peri); exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri; + + if (samsung_rev() == EXYNOS4210_REV_0) + exynos_mdma1_device.res.start = EXYNOS4_PA_S_MDMA1; } else if (soc_is_exynos4212() || soc_is_exynos4412()) { exynos_pdma0_pdata.nr_valid_peri = ARRAY_SIZE(exynos4212_pdma0_peri); diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 8480849affb9..ed4da4544cd2 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -90,6 +90,7 @@ #define EXYNOS4_PA_MDMA0 0x10810000 #define EXYNOS4_PA_MDMA1 0x12850000 +#define EXYNOS4_PA_S_MDMA1 0x12840000 #define EXYNOS4_PA_PDMA0 0x12680000 #define EXYNOS4_PA_PDMA1 0x12690000 #define EXYNOS5_PA_MDMA0 0x10800000 diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c index 82c27230d4a9..86e37cd9376c 100644 --- a/arch/arm/mach-highbank/system.c +++ b/arch/arm/mach-highbank/system.c @@ -28,6 +28,7 @@ void highbank_restart(char mode, const char *cmd) hignbank_set_pwr_soft_reset(); scu_power_mode(scu_base_addr, SCU_PM_POWEROFF); - cpu_do_idle(); + while (1) + cpu_do_idle(); } diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c index 3c1b8ff9a0a6..cc49c7ae186e 100644 --- a/arch/arm/mach-imx/clk-gate2.c +++ b/arch/arm/mach-imx/clk-gate2.c @@ -112,7 +112,7 @@ struct clk *clk_register_gate2(struct device *dev, const char *name, clk = clk_register(dev, &gate->hw); if (IS_ERR(clk)) - kfree(clk); + kfree(gate); return clk; } diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c index 412c583a24b0..576af7446952 100644 --- a/arch/arm/mach-imx/ehci-imx25.c +++ b/arch/arm/mach-imx/ehci-imx25.c @@ -30,7 +30,7 @@ #define MX25_H1_SIC_SHIFT 21 #define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT) #define MX25_H1_PP_BIT (1 << 18) -#define MX25_H1_PM_BIT (1 << 8) +#define MX25_H1_PM_BIT (1 << 16) #define MX25_H1_IPPUE_UP_BIT (1 << 7) #define MX25_H1_IPPUE_DOWN_BIT (1 << 6) #define MX25_H1_TLL_BIT (1 << 5) diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c index 779e16eb65cb..293397852e4e 100644 --- a/arch/arm/mach-imx/ehci-imx35.c +++ b/arch/arm/mach-imx/ehci-imx35.c @@ -30,7 +30,7 @@ #define MX35_H1_SIC_SHIFT 21 #define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT) #define MX35_H1_PP_BIT (1 << 18) -#define MX35_H1_PM_BIT (1 << 8) +#define MX35_H1_PM_BIT (1 << 16) #define MX35_H1_IPPUE_UP_BIT (1 << 7) #define MX35_H1_IPPUE_DOWN_BIT (1 << 6) #define MX35_H1_TLL_BIT (1 << 5) diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index e428f3ab15c7..b3d86d7081a0 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -21,10 +21,9 @@ #include <linux/amba/bus.h> #include <linux/amba/clcd.h> #include <linux/io.h> +#include <linux/platform_data/clk-integrator.h> #include <linux/slab.h> -#include <linux/clkdev.h> -#include <asm/hardware/icst.h> #include <mach/lm.h> #include <mach/impd1.h> #include <asm/sizes.h> @@ -36,45 +35,6 @@ MODULE_PARM_DESC(lmid, "logic module stack position"); struct impd1_module { void __iomem *base; - struct clk vcos[2]; - struct clk_lookup *clks[3]; -}; - -static const struct icst_params impd1_vco_params = { - .ref = 24000000, /* 24 MHz */ - .vco_max = ICST525_VCO_MAX_3V, - .vco_min = ICST525_VCO_MIN, - .vd_min = 12, - .vd_max = 519, - .rd_min = 3, - .rd_max = 120, - .s2div = icst525_s2div, - .idx2s = icst525_idx2s, -}; - -static void impd1_setvco(struct clk *clk, struct icst_vco vco) -{ - struct impd1_module *impd1 = clk->data; - u32 val = vco.v | (vco.r << 9) | (vco.s << 16); - - writel(0xa05f, impd1->base + IMPD1_LOCK); - writel(val, clk->vcoreg); - writel(0, impd1->base + IMPD1_LOCK); - -#ifdef DEBUG - vco.v = val & 0x1ff; - vco.r = (val >> 9) & 0x7f; - vco.s = (val >> 16) & 7; - - pr_debug("IM-PD1: VCO%d clock is %ld Hz\n", - vconr, icst525_hz(&impd1_vco_params, vco)); -#endif -} - -static const struct clk_ops impd1_clk_ops = { - .round = icst_clk_round, - .set = icst_clk_set, - .setvco = impd1_setvco, }; void impd1_tweak_control(struct device *dev, u32 mask, u32 val) @@ -344,10 +304,6 @@ static struct impd1_device impd1_devs[] = { } }; -static struct clk fixed_14745600 = { - .rate = 14745600, -}; - static int impd1_probe(struct lm_device *dev) { struct impd1_module *impd1; @@ -376,23 +332,7 @@ static int impd1_probe(struct lm_device *dev) printk("IM-PD1 found at 0x%08lx\n", (unsigned long)dev->resource.start); - for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) { - impd1->vcos[i].ops = &impd1_clk_ops, - impd1->vcos[i].owner = THIS_MODULE, - impd1->vcos[i].params = &impd1_vco_params, - impd1->vcos[i].data = impd1; - } - impd1->vcos[0].vcoreg = impd1->base + IMPD1_OSC1; - impd1->vcos[1].vcoreg = impd1->base + IMPD1_OSC2; - - impd1->clks[0] = clkdev_alloc(&impd1->vcos[0], NULL, "lm%x:01000", - dev->id); - impd1->clks[1] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00100", - dev->id); - impd1->clks[2] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00200", - dev->id); - for (i = 0; i < ARRAY_SIZE(impd1->clks); i++) - clkdev_add(impd1->clks[i]); + integrator_impd1_clk_init(impd1->base, dev->id); for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) { struct impd1_device *idev = impd1_devs + i; @@ -431,12 +371,9 @@ static int impd1_remove_one(struct device *dev, void *data) static void impd1_remove(struct lm_device *dev) { struct impd1_module *impd1 = lm_get_drvdata(dev); - int i; device_for_each_child(&dev->dev, NULL, impd1_remove_one); - - for (i = 0; i < ARRAY_SIZE(impd1->clks); i++) - clkdev_drop(impd1->clks[i]); + integrator_impd1_clk_exit(dev->id); lm_set_drvdata(dev, NULL); diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 1694f01ce2b6..6d6bde3e15fa 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -410,6 +410,7 @@ void __init ixp4xx_pci_preinit(void) * Enable the IO window to be way up high, at 0xfffffc00 */ local_write_config(PCI_BASE_ADDRESS_5, 4, 0xfffffc01); + local_write_config(0x40, 4, 0x000080FF); /* No TRDY time limit */ } else { printk("PCI: IXP4xx is target - No bus scan performed\n"); } diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index fdf91a160884..8c0c0e2d0727 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -67,15 +67,12 @@ static struct map_desc ixp4xx_io_desc[] __initdata = { .pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS), .length = IXP4XX_PCI_CFG_REGION_SIZE, .type = MT_DEVICE - }, -#ifdef CONFIG_DEBUG_LL - { /* Debug UART mapping */ - .virtual = (unsigned long)IXP4XX_DEBUG_UART_BASE_VIRT, - .pfn = __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS), - .length = IXP4XX_DEBUG_UART_REGION_SIZE, + }, { /* Queue Manager */ + .virtual = (unsigned long)IXP4XX_QMGR_BASE_VIRT, + .pfn = __phys_to_pfn(IXP4XX_QMGR_BASE_PHYS), + .length = IXP4XX_QMGR_REGION_SIZE, .type = MT_DEVICE - } -#endif + }, }; void __init ixp4xx_map_io(void) diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c index b800a031207c..53b8348dfcc2 100644 --- a/arch/arm/mach-ixp4xx/goramo_mlr.c +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -15,6 +15,7 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/pci.h> +#include <asm/system_info.h> #define SLOT_ETHA 0x0B /* IDSEL = AD21 */ #define SLOT_ETHB 0x0C /* IDSEL = AD20 */ @@ -329,7 +330,7 @@ static struct platform_device device_hss_tab[] = { }; -static struct platform_device *device_tab[6] __initdata = { +static struct platform_device *device_tab[7] __initdata = { &device_flash, /* index 0 */ }; diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S index 8c9f8d564492..ff686cbc5df4 100644 --- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S @@ -17,8 +17,8 @@ #else mov \rp, #0 #endif - orr \rv, \rp, #0xff000000 @ virtual - orr \rv, \rv, #0x00b00000 + orr \rv, \rp, #0xfe000000 @ virtual + orr \rv, \rv, #0x00f00000 orr \rp, \rp, #0xc8000000 @ physical .endm diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h index eb68b61ce975..c5bae9c035d5 100644 --- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h +++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h @@ -30,51 +30,43 @@ * * 0x50000000 0x10000000 ioremap'd EXP BUS * - * 0x6000000 0x00004000 ioremap'd QMgr + * 0xC8000000 0x00013000 0xFEF00000 On-Chip Peripherals * - * 0xC0000000 0x00001000 0xffbff000 PCI CFG + * 0xC0000000 0x00001000 0xFEF13000 PCI CFG * - * 0xC4000000 0x00001000 0xffbfe000 EXP CFG + * 0xC4000000 0x00001000 0xFEF14000 EXP CFG * - * 0xC8000000 0x00013000 0xffbeb000 On-Chip Peripherals + * 0x60000000 0x00004000 0xFEF15000 QMgr */ /* * Queue Manager */ -#define IXP4XX_QMGR_BASE_PHYS (0x60000000) -#define IXP4XX_QMGR_REGION_SIZE (0x00004000) +#define IXP4XX_QMGR_BASE_PHYS 0x60000000 +#define IXP4XX_QMGR_BASE_VIRT IOMEM(0xFEF15000) +#define IXP4XX_QMGR_REGION_SIZE 0x00004000 /* - * Expansion BUS Configuration registers + * Peripheral space, including debug UART. Must be section-aligned so that + * it can be used with the low-level debug code. */ -#define IXP4XX_EXP_CFG_BASE_PHYS (0xC4000000) -#define IXP4XX_EXP_CFG_BASE_VIRT IOMEM(0xFFBFE000) -#define IXP4XX_EXP_CFG_REGION_SIZE (0x00001000) +#define IXP4XX_PERIPHERAL_BASE_PHYS 0xC8000000 +#define IXP4XX_PERIPHERAL_BASE_VIRT IOMEM(0xFEF00000) +#define IXP4XX_PERIPHERAL_REGION_SIZE 0x00013000 /* * PCI Config registers */ -#define IXP4XX_PCI_CFG_BASE_PHYS (0xC0000000) -#define IXP4XX_PCI_CFG_BASE_VIRT IOMEM(0xFFBFF000) -#define IXP4XX_PCI_CFG_REGION_SIZE (0x00001000) - -/* - * Peripheral space - */ -#define IXP4XX_PERIPHERAL_BASE_PHYS (0xC8000000) -#define IXP4XX_PERIPHERAL_BASE_VIRT IOMEM(0xFFBEB000) -#define IXP4XX_PERIPHERAL_REGION_SIZE (0x00013000) +#define IXP4XX_PCI_CFG_BASE_PHYS 0xC0000000 +#define IXP4XX_PCI_CFG_BASE_VIRT IOMEM(0xFEF13000) +#define IXP4XX_PCI_CFG_REGION_SIZE 0x00001000 /* - * Debug UART - * - * This is basically a remap of UART1 into a region that is section - * aligned so that it * can be used with the low-level debug code. + * Expansion BUS Configuration registers */ -#define IXP4XX_DEBUG_UART_BASE_PHYS (0xC8000000) -#define IXP4XX_DEBUG_UART_BASE_VIRT IOMEM(0xffb00000) -#define IXP4XX_DEBUG_UART_REGION_SIZE (0x00001000) +#define IXP4XX_EXP_CFG_BASE_PHYS 0xC4000000 +#define IXP4XX_EXP_CFG_BASE_VIRT 0xFEF14000 +#define IXP4XX_EXP_CFG_REGION_SIZE 0x00001000 #define IXP4XX_EXP_CS0_OFFSET 0x00 #define IXP4XX_EXP_CS1_OFFSET 0x04 diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h index 9e7cad2d54cb..4de8da536dbb 100644 --- a/arch/arm/mach-ixp4xx/include/mach/qmgr.h +++ b/arch/arm/mach-ixp4xx/include/mach/qmgr.h @@ -86,7 +86,7 @@ void qmgr_release_queue(unsigned int queue); static inline void qmgr_put_entry(unsigned int queue, u32 val) { - extern struct qmgr_regs __iomem *qmgr_regs; + struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; #if DEBUG_QMGR BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */ @@ -99,7 +99,7 @@ static inline void qmgr_put_entry(unsigned int queue, u32 val) static inline u32 qmgr_get_entry(unsigned int queue) { u32 val; - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; val = __raw_readl(&qmgr_regs->acc[queue][0]); #if DEBUG_QMGR BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */ @@ -112,14 +112,14 @@ static inline u32 qmgr_get_entry(unsigned int queue) static inline int __qmgr_get_stat1(unsigned int queue) { - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; return (__raw_readl(&qmgr_regs->stat1[queue >> 3]) >> ((queue & 7) << 2)) & 0xF; } static inline int __qmgr_get_stat2(unsigned int queue) { - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; BUG_ON(queue >= HALF_QUEUES); return (__raw_readl(&qmgr_regs->stat2[queue >> 4]) >> ((queue & 0xF) << 1)) & 0x3; @@ -145,7 +145,7 @@ static inline int qmgr_stat_empty(unsigned int queue) */ static inline int qmgr_stat_below_low_watermark(unsigned int queue) { - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; if (queue >= HALF_QUEUES) return (__raw_readl(&qmgr_regs->statne_h) >> (queue - HALF_QUEUES)) & 0x01; @@ -172,7 +172,7 @@ static inline int qmgr_stat_above_high_watermark(unsigned int queue) */ static inline int qmgr_stat_full(unsigned int queue) { - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; if (queue >= HALF_QUEUES) return (__raw_readl(&qmgr_regs->statf_h) >> (queue - HALF_QUEUES)) & 0x01; diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c index a17ed79207a4..d4eb09a62863 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c @@ -116,7 +116,11 @@ /* NPE mailbox_status value for reset */ #define RESET_MBOX_STAT 0x0000F0F0 -const char *npe_names[] = { "NPE-A", "NPE-B", "NPE-C" }; +#define NPE_A_FIRMWARE "NPE-A" +#define NPE_B_FIRMWARE "NPE-B" +#define NPE_C_FIRMWARE "NPE-C" + +const char *npe_names[] = { NPE_A_FIRMWARE, NPE_B_FIRMWARE, NPE_C_FIRMWARE }; #define print_npe(pri, npe, fmt, ...) \ printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__) @@ -724,6 +728,9 @@ module_exit(npe_cleanup_module); MODULE_AUTHOR("Krzysztof Halasa"); MODULE_LICENSE("GPL v2"); +MODULE_FIRMWARE(NPE_A_FIRMWARE); +MODULE_FIRMWARE(NPE_B_FIRMWARE); +MODULE_FIRMWARE(NPE_C_FIRMWARE); EXPORT_SYMBOL(npe_names); EXPORT_SYMBOL(npe_running); diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c index 852f7c9f87d0..9d1b6b7c394c 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c @@ -14,7 +14,7 @@ #include <linux/module.h> #include <mach/qmgr.h> -struct qmgr_regs __iomem *qmgr_regs; +static struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; static struct resource *mem_res; static spinlock_t qmgr_lock; static u32 used_sram_bitmap[4]; /* 128 16-dword pages */ @@ -293,12 +293,6 @@ static int qmgr_init(void) if (mem_res == NULL) return -EBUSY; - qmgr_regs = ioremap(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); - if (qmgr_regs == NULL) { - err = -ENOMEM; - goto error_map; - } - /* reset qmgr registers */ for (i = 0; i < 4; i++) { __raw_writel(0x33333333, &qmgr_regs->stat1[i]); @@ -347,8 +341,6 @@ static int qmgr_init(void) error_irq2: free_irq(IRQ_IXP4XX_QM1, NULL); error_irq: - iounmap(qmgr_regs); -error_map: release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); return err; } @@ -359,7 +351,6 @@ static void qmgr_remove(void) free_irq(IRQ_IXP4XX_QM2, NULL); synchronize_irq(IRQ_IXP4XX_QM1); synchronize_irq(IRQ_IXP4XX_QM2); - iounmap(qmgr_regs); release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); } @@ -369,7 +360,6 @@ module_exit(qmgr_remove); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Krzysztof Halasa"); -EXPORT_SYMBOL(qmgr_regs); EXPORT_SYMBOL(qmgr_set_irq); EXPORT_SYMBOL(qmgr_enable_irq); EXPORT_SYMBOL(qmgr_disable_irq); diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index ec544918b12c..74fc5a074fc4 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -207,14 +207,19 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) return 1; } +/* + * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it + * is operating as a root complex this needs to be switched to + * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on + * the device. Decoding setup is handled by the orion code. + */ static void __devinit rc_pci_fixup(struct pci_dev *dev) { - /* - * Prevent enumeration of root complex. - */ if (dev->bus->parent == NULL && dev->devfn == 0) { int i; + dev->class &= 0xff; + dev->class |= PCI_CLASS_BRIDGE_HOST << 8; for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { dev->resource[i].start = 0; dev->resource[i].end = 0; diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index bfa1eab91f41..22ef8a1abe08 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -24,6 +24,7 @@ #include <linux/i2c.h> #include <linux/io.h> #include <linux/pinctrl/machine.h> +#include <linux/platform_data/pinctrl-nomadik.h> #include <asm/hardware/vic.h> #include <asm/sizes.h> #include <asm/mach-types.h> @@ -32,9 +33,7 @@ #include <asm/mach/flash.h> #include <asm/mach/time.h> -#include <plat/gpio-nomadik.h> #include <plat/mtu.h> -#include <plat/pincfg.h> #include <linux/platform_data/mtd-nomadik-nand.h> #include <mach/fsmc.h> diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index b617eaed0ce5..1273931303fb 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -26,8 +26,8 @@ #include <linux/irq.h> #include <linux/dma-mapping.h> #include <linux/platform_data/clk-nomadik.h> +#include <linux/platform_data/pinctrl-nomadik.h> -#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c index 6d14454d4609..0c2f6628299a 100644 --- a/arch/arm/mach-nomadik/i2c-8815nhk.c +++ b/arch/arm/mach-nomadik/i2c-8815nhk.c @@ -4,8 +4,7 @@ #include <linux/i2c-algo-bit.h> #include <linux/i2c-gpio.h> #include <linux/platform_device.h> -#include <plat/gpio-nomadik.h> -#include <plat/pincfg.h> +#include <linux/platform_data/pinctrl-nomadik.h> /* * There are two busses in the 8815NHK. diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 48d5e41dfbfa..378590694447 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -580,6 +580,11 @@ static void __init igep_wlan_bt_init(void) } else return; + /* Make sure that the GPIO pins are muxed correctly */ + omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT); + err = gpio_request_array(igep_wlan_bt_gpios, ARRAY_SIZE(igep_wlan_bt_gpios)); if (err) { diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index b700685762b5..56277a047136 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -45,7 +45,6 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include "common.h" #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index b56d06b48782..95192a062d5d 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -359,7 +359,7 @@ static struct clockdomain iss_44xx_clkdm = { .clkdm_offs = OMAP4430_CM2_CAM_CAM_CDOFFS, .wkdep_srcs = iss_wkup_sleep_deps, .sleepdep_srcs = iss_wkup_sleep_deps, - .flags = CLKDM_CAN_HWSUP_SWSUP, + .flags = CLKDM_CAN_SWSUP, }; static struct clockdomain l3_dss_44xx_clkdm = { diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 48daac2581b4..84551f205e46 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -64,30 +64,36 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, struct spi_board_info *spi_bi = &ads7846_spi_board_info; int err; - err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); - if (err) { - pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); - return; - } + /* + * If a board defines get_pendown_state() function, request the pendown + * GPIO and set the GPIO debounce time. + * If a board does not define the get_pendown_state() function, then + * the ads7846 driver will setup the pendown GPIO itself. + */ + if (board_pdata && board_pdata->get_pendown_state) { + err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); + if (err) { + pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); + return; + } - if (gpio_debounce) - gpio_set_debounce(gpio_pendown, gpio_debounce); + if (gpio_debounce) + gpio_set_debounce(gpio_pendown, gpio_debounce); + + gpio_export(gpio_pendown, 0); + } spi_bi->bus_num = bus_num; spi_bi->irq = gpio_to_irq(gpio_pendown); + ads7846_config.gpio_pendown = gpio_pendown; + if (board_pdata) { board_pdata->gpio_pendown = gpio_pendown; + board_pdata->gpio_pendown_debounce = gpio_debounce; spi_bi->platform_data = board_pdata; - if (board_pdata->get_pendown_state) - gpio_export(gpio_pendown, 0); - } else { - ads7846_config.gpio_pendown = gpio_pendown; } - if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state)) - gpio_free(gpio_pendown); - spi_register_board_info(&ads7846_spi_board_info, 1); } #else diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index cba60e05e32e..c72b5a727720 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -19,6 +19,7 @@ #include <linux/of.h> #include <linux/pinctrl/machine.h> #include <linux/platform_data/omap4-keypad.h> +#include <linux/platform_data/omap_ocp2scp.h> #include <asm/mach-types.h> #include <asm/mach/map.h> @@ -613,6 +614,83 @@ static void omap_init_vout(void) static inline void omap_init_vout(void) {} #endif +#if defined(CONFIG_OMAP_OCP2SCP) || defined(CONFIG_OMAP_OCP2SCP_MODULE) +static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev) +{ + int cnt = 0; + + while (ocp2scp_dev->drv_name != NULL) { + cnt++; + ocp2scp_dev++; + } + + return cnt; +} + +static void omap_init_ocp2scp(void) +{ + struct omap_hwmod *oh; + struct platform_device *pdev; + int bus_id = -1, dev_cnt = 0, i; + struct omap_ocp2scp_dev *ocp2scp_dev; + const char *oh_name, *name; + struct omap_ocp2scp_platform_data *pdata; + + if (!cpu_is_omap44xx()) + return; + + oh_name = "ocp2scp_usb_phy"; + name = "omap-ocp2scp"; + + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("%s: could not find omap_hwmod for %s\n", __func__, + oh_name); + return; + } + + pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + pr_err("%s: No memory for ocp2scp pdata\n", __func__); + return; + } + + ocp2scp_dev = oh->dev_attr; + dev_cnt = count_ocp2scp_devices(ocp2scp_dev); + + if (!dev_cnt) { + pr_err("%s: No devices connected to ocp2scp\n", __func__); + kfree(pdata); + return; + } + + pdata->devices = kzalloc(sizeof(struct omap_ocp2scp_dev *) + * dev_cnt, GFP_KERNEL); + if (!pdata->devices) { + pr_err("%s: No memory for ocp2scp pdata devices\n", __func__); + kfree(pdata); + return; + } + + for (i = 0; i < dev_cnt; i++, ocp2scp_dev++) + pdata->devices[i] = ocp2scp_dev; + + pdata->dev_cnt = dev_cnt; + + pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(*pdata), NULL, + 0, false); + if (IS_ERR(pdev)) { + pr_err("Could not build omap_device for %s %s\n", + name, oh_name); + kfree(pdata->devices); + kfree(pdata); + return; + } +} +#else +static inline void omap_init_ocp2scp(void) { } +#endif + /*-------------------------------------------------------------------------*/ static int __init omap2_init_devices(void) @@ -640,6 +718,7 @@ static int __init omap2_init_devices(void) omap_init_sham(); omap_init_aes(); omap_init_vout(); + omap_init_ocp2scp(); return 0; } diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c index 72e0f01b715c..49a7ffb716a5 100644 --- a/arch/arm/mach-omap2/drm.c +++ b/arch/arm/mach-omap2/drm.c @@ -23,15 +23,20 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/platform_data/omap_drm.h> #include <plat/omap_device.h> #include <plat/omap_hwmod.h> +#include <plat/cpu.h> #if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE) +static struct omap_drm_platform_data platform_data; + static struct platform_device omap_drm_device = { .dev = { .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &platform_data, }, .name = "omapdrm", .id = 0, @@ -52,6 +57,8 @@ static int __init omap_init_drm(void) oh->name); } + platform_data.omaprev = GET_OMAP_REVISION(); + return platform_device_register(&omap_drm_device); } diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index b969ab1d258b..87cc6d058de2 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -422,6 +422,38 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v) } /** + * _wait_softreset_complete - wait for an OCP softreset to complete + * @oh: struct omap_hwmod * to wait on + * + * Wait until the IP block represented by @oh reports that its OCP + * softreset is complete. This can be triggered by software (see + * _ocp_softreset()) or by hardware upon returning from off-mode (one + * example is HSMMC). Waits for up to MAX_MODULE_SOFTRESET_WAIT + * microseconds. Returns the number of microseconds waited. + */ +static int _wait_softreset_complete(struct omap_hwmod *oh) +{ + struct omap_hwmod_class_sysconfig *sysc; + u32 softrst_mask; + int c = 0; + + sysc = oh->class->sysc; + + if (sysc->sysc_flags & SYSS_HAS_RESET_STATUS) + omap_test_timeout((omap_hwmod_read(oh, sysc->syss_offs) + & SYSS_RESETDONE_MASK), + MAX_MODULE_SOFTRESET_WAIT, c); + else if (sysc->sysc_flags & SYSC_HAS_RESET_STATUS) { + softrst_mask = (0x1 << sysc->sysc_fields->srst_shift); + omap_test_timeout(!(omap_hwmod_read(oh, sysc->sysc_offs) + & softrst_mask), + MAX_MODULE_SOFTRESET_WAIT, c); + } + + return c; +} + +/** * _set_dmadisable: set OCP_SYSCONFIG.DMADISABLE bit in @v * @oh: struct omap_hwmod * * @@ -1282,6 +1314,18 @@ static void _enable_sysc(struct omap_hwmod *oh) if (!oh->class->sysc) return; + /* + * Wait until reset has completed, this is needed as the IP + * block is reset automatically by hardware in some cases + * (off-mode for example), and the drivers require the + * IP to be ready when they access it + */ + if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET) + _enable_optional_clocks(oh); + _wait_softreset_complete(oh); + if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET) + _disable_optional_clocks(oh); + v = oh->_sysc_cache; sf = oh->class->sysc->sysc_flags; @@ -1804,7 +1848,7 @@ static int _am33xx_disable_module(struct omap_hwmod *oh) */ static int _ocp_softreset(struct omap_hwmod *oh) { - u32 v, softrst_mask; + u32 v; int c = 0; int ret = 0; @@ -1834,19 +1878,7 @@ static int _ocp_softreset(struct omap_hwmod *oh) if (oh->class->sysc->srst_udelay) udelay(oh->class->sysc->srst_udelay); - if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS) - omap_test_timeout((omap_hwmod_read(oh, - oh->class->sysc->syss_offs) - & SYSS_RESETDONE_MASK), - MAX_MODULE_SOFTRESET_WAIT, c); - else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS) { - softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift); - omap_test_timeout(!(omap_hwmod_read(oh, - oh->class->sysc->sysc_offs) - & softrst_mask), - MAX_MODULE_SOFTRESET_WAIT, c); - } - + c = _wait_softreset_complete(oh); if (c == MAX_MODULE_SOFTRESET_WAIT) pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n", oh->name, MAX_MODULE_SOFTRESET_WAIT); @@ -2352,6 +2384,9 @@ static int __init _setup_reset(struct omap_hwmod *oh) if (oh->_state != _HWMOD_STATE_INITIALIZED) return -EINVAL; + if (oh->flags & HWMOD_EXT_OPT_MAIN_CLK) + return -EPERM; + if (oh->rst_lines_cnt == 0) { r = _enable(oh); if (r) { diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 652d0285bd6d..0b1249e00398 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -21,6 +21,7 @@ #include <linux/io.h> #include <linux/platform_data/gpio-omap.h> #include <linux/power/smartreflex.h> +#include <linux/platform_data/omap_ocp2scp.h> #include <plat/omap_hwmod.h> #include <plat/i2c.h> @@ -2125,6 +2126,14 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = { .name = "mcpdm", .class = &omap44xx_mcpdm_hwmod_class, .clkdm_name = "abe_clkdm", + /* + * It's suspected that the McPDM requires an off-chip main + * functional clock, controlled via I2C. This IP block is + * currently reset very early during boot, before I2C is + * available, so it doesn't seem that we have any choice in + * the kernel other than to avoid resetting it. + */ + .flags = HWMOD_EXT_OPT_MAIN_CLK, .mpu_irqs = omap44xx_mcpdm_irqs, .sdma_reqs = omap44xx_mcpdm_sdma_reqs, .main_clk = "mcpdm_fck", @@ -2681,6 +2690,32 @@ static struct omap_hwmod_class omap44xx_ocp2scp_hwmod_class = { .sysc = &omap44xx_ocp2scp_sysc, }; +/* ocp2scp dev_attr */ +static struct resource omap44xx_usb_phy_and_pll_addrs[] = { + { + .name = "usb_phy", + .start = 0x4a0ad080, + .end = 0x4a0ae000, + .flags = IORESOURCE_MEM, + }, + { + /* XXX: Remove this once control module driver is in place */ + .name = "ctrl_dev", + .start = 0x4a002300, + .end = 0x4a002303, + .flags = IORESOURCE_MEM, + }, + { } +}; + +static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = { + { + .drv_name = "omap-usb2", + .res = omap44xx_usb_phy_and_pll_addrs, + }, + { } +}; + /* ocp2scp_usb_phy */ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { .name = "ocp2scp_usb_phy", @@ -2694,6 +2729,7 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { .modulemode = MODULEMODE_HWCTRL, }, }, + .dev_attr = ocp2scp_dev_attr, }; /* diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 635e109f5ad3..a256135d8e48 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -73,6 +73,7 @@ void __init omap4_pmic_init(const char *pmic_type, { /* PMIC part*/ omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); + omap_mux_init_signal("fref_clk0_out.sys_drm_msecure", OMAP_PIN_OUTPUT); omap_pmic_init(1, 400, pmic_type, 7 + OMAP44XX_IRQ_GIC_START, pmic_data); /* Register additional devices on i2c1 bus if needed */ @@ -366,7 +367,7 @@ static struct regulator_init_data omap4_clk32kg_idata = { }; static struct regulator_consumer_supply omap4_vdd1_supply[] = { - REGULATOR_SUPPLY("vcc", "mpu.0"), + REGULATOR_SUPPLY("vcc", "cpu0"), }; static struct regulator_consumer_supply omap4_vdd2_supply[] = { diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 880249b17012..75878c37959b 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -264,7 +264,7 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm) if (initialized) { if (voltdm->pmic->i2c_high_speed != i2c_high_speed) - pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).", + pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).\n", __func__, voltdm->name, i2c_high_speed); return; } diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 5ecbd17b5641..e2c6391863fe 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -28,6 +28,7 @@ #include <linux/mfd/asic3.h> #include <linux/mtd/physmap.h> #include <linux/pda_power.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/regulator/driver.h> #include <linux/regulator/gpio-regulator.h> @@ -556,7 +557,7 @@ static struct platform_device hx4700_lcd = { */ static struct platform_pwm_backlight_data backlight_data = { - .pwm_id = 1, + .pwm_id = -1, /* Superseded by pwm_lookup */ .max_brightness = 200, .dft_brightness = 100, .pwm_period_ns = 30923, @@ -571,6 +572,10 @@ static struct platform_device backlight = { }, }; +static struct pwm_lookup hx4700_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight", NULL), +}; + /* * USB "Transceiver" */ @@ -872,6 +877,7 @@ static void __init hx4700_init(void) pxa_set_stuart_info(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); + pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup)); pxa_set_ficp_info(&ficp_info); pxa27x_set_i2c_power_info(NULL); diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 438f02fe122a..842596d4d31e 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -86,10 +86,7 @@ static void spitz_discharge1(int on) gpio_set_value(SPITZ_GPIO_LED_GREEN, on); } -static unsigned long gpio18_config[] = { - GPIO18_RDY, - GPIO18_GPIO, -}; +static unsigned long gpio18_config = GPIO18_GPIO; static void spitz_presuspend(void) { @@ -112,7 +109,7 @@ static void spitz_presuspend(void) PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0); - pxa2xx_mfp_config(&gpio18_config[0], 1); + pxa2xx_mfp_config(&gpio18_config, 1); gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown"); gpio_free(18); @@ -131,7 +128,6 @@ static void spitz_presuspend(void) static void spitz_postsuspend(void) { - pxa2xx_mfp_config(&gpio18_config[1], 1); } static int spitz_should_wakeup(unsigned int resume_on_alarm) diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index 0a43f3189c21..7a05de794a8c 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -548,7 +548,6 @@ static struct platform_device fsi_ak4648_device = { /* I2C */ static struct pcf857x_platform_data pcf8575_pdata = { .gpio_base = GPIO_PCF8575_BASE, - .irq = intcs_evt2irq(0x3260), /* IRQ19 */ }; static struct i2c_board_info i2c0_devices[] = { @@ -570,6 +569,7 @@ static struct i2c_board_info i2c1_devices[] = { static struct i2c_board_info i2c3_devices[] = { { I2C_BOARD_INFO("pcf8575", 0x20), + .irq = intcs_evt2irq(0x3260), /* IRQ19 */ .platform_data = &pcf8575_pdata, }, }; diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index b8efac4daed8..ece8a2dfb814 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -1445,8 +1445,6 @@ static struct platform_device pinctrl_device = { static struct u300_gpio_platform u300_gpio_plat = { .ports = 7, .gpio_base = 0, - .gpio_irq_base = IRQ_U300_GPIO_BASE, - .pinctrl_device = &pinctrl_device, }; static struct platform_device gpio_device = { @@ -1590,6 +1588,7 @@ static struct platform_device *platform_devs[] __initdata = { &i2c1_device, &keypad_device, &rtc_device, + &pinctrl_device, &gpio_device, &nand_device, &wdog_device, @@ -1804,7 +1803,7 @@ MACHINE_START(U300, "Ericsson AB U335 S335/B335 Prototype Board") /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */ .atag_offset = 0x100, .map_io = u300_map_io, - .nr_irqs = NR_IRQS_U300, + .nr_irqs = 0, .init_irq = u300_init_irq, .handle_irq = vic_handle_irq, .timer = &u300_timer, diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h index e27425a63fa1..21d5e76a6cd3 100644 --- a/arch/arm/mach-u300/include/mach/irqs.h +++ b/arch/arm/mach-u300/include/mach/irqs.h @@ -12,79 +12,69 @@ #ifndef __MACH_IRQS_H #define __MACH_IRQS_H -#define IRQ_U300_INTCON0_START 1 -#define IRQ_U300_INTCON1_START 33 +#define IRQ_U300_INTCON0_START 32 +#define IRQ_U300_INTCON1_START 64 /* These are on INTCON0 - 30 lines */ -#define IRQ_U300_IRQ0_EXT 1 -#define IRQ_U300_IRQ1_EXT 2 -#define IRQ_U300_DMA 3 -#define IRQ_U300_VIDEO_ENC_0 4 -#define IRQ_U300_VIDEO_ENC_1 5 -#define IRQ_U300_AAIF_RX 6 -#define IRQ_U300_AAIF_TX 7 -#define IRQ_U300_AAIF_VGPIO 8 -#define IRQ_U300_AAIF_WAKEUP 9 -#define IRQ_U300_PCM_I2S0_FRAME 10 -#define IRQ_U300_PCM_I2S0_FIFO 11 -#define IRQ_U300_PCM_I2S1_FRAME 12 -#define IRQ_U300_PCM_I2S1_FIFO 13 -#define IRQ_U300_XGAM_GAMCON 14 -#define IRQ_U300_XGAM_CDI 15 -#define IRQ_U300_XGAM_CDICON 16 -#define IRQ_U300_XGAM_PDI 18 -#define IRQ_U300_XGAM_PDICON 19 -#define IRQ_U300_XGAM_GAMEACC 20 -#define IRQ_U300_XGAM_MCIDCT 21 -#define IRQ_U300_APEX 22 -#define IRQ_U300_UART0 23 -#define IRQ_U300_SPI 24 -#define IRQ_U300_TIMER_APP_OS 25 -#define IRQ_U300_TIMER_APP_DD 26 -#define IRQ_U300_TIMER_APP_GP1 27 -#define IRQ_U300_TIMER_APP_GP2 28 -#define IRQ_U300_TIMER_OS 29 -#define IRQ_U300_TIMER_MS 30 -#define IRQ_U300_KEYPAD_KEYBF 31 -#define IRQ_U300_KEYPAD_KEYBR 32 +#define IRQ_U300_IRQ0_EXT 32 +#define IRQ_U300_IRQ1_EXT 33 +#define IRQ_U300_DMA 34 +#define IRQ_U300_VIDEO_ENC_0 35 +#define IRQ_U300_VIDEO_ENC_1 36 +#define IRQ_U300_AAIF_RX 37 +#define IRQ_U300_AAIF_TX 38 +#define IRQ_U300_AAIF_VGPIO 39 +#define IRQ_U300_AAIF_WAKEUP 40 +#define IRQ_U300_PCM_I2S0_FRAME 41 +#define IRQ_U300_PCM_I2S0_FIFO 42 +#define IRQ_U300_PCM_I2S1_FRAME 43 +#define IRQ_U300_PCM_I2S1_FIFO 44 +#define IRQ_U300_XGAM_GAMCON 45 +#define IRQ_U300_XGAM_CDI 46 +#define IRQ_U300_XGAM_CDICON 47 +#define IRQ_U300_XGAM_PDI 49 +#define IRQ_U300_XGAM_PDICON 50 +#define IRQ_U300_XGAM_GAMEACC 51 +#define IRQ_U300_XGAM_MCIDCT 52 +#define IRQ_U300_APEX 53 +#define IRQ_U300_UART0 54 +#define IRQ_U300_SPI 55 +#define IRQ_U300_TIMER_APP_OS 56 +#define IRQ_U300_TIMER_APP_DD 57 +#define IRQ_U300_TIMER_APP_GP1 58 +#define IRQ_U300_TIMER_APP_GP2 59 +#define IRQ_U300_TIMER_OS 60 +#define IRQ_U300_TIMER_MS 61 +#define IRQ_U300_KEYPAD_KEYBF 62 +#define IRQ_U300_KEYPAD_KEYBR 63 /* These are on INTCON1 - 32 lines */ -#define IRQ_U300_GPIO_PORT0 33 -#define IRQ_U300_GPIO_PORT1 34 -#define IRQ_U300_GPIO_PORT2 35 +#define IRQ_U300_GPIO_PORT0 64 +#define IRQ_U300_GPIO_PORT1 65 +#define IRQ_U300_GPIO_PORT2 66 /* These are for DB3150, DB3200 and DB3350 */ -#define IRQ_U300_WDOG 36 -#define IRQ_U300_EVHIST 37 -#define IRQ_U300_MSPRO 38 -#define IRQ_U300_MMCSD_MCIINTR0 39 -#define IRQ_U300_MMCSD_MCIINTR1 40 -#define IRQ_U300_I2C0 41 -#define IRQ_U300_I2C1 42 -#define IRQ_U300_RTC 43 -#define IRQ_U300_NFIF 44 -#define IRQ_U300_NFIF2 45 +#define IRQ_U300_WDOG 67 +#define IRQ_U300_EVHIST 68 +#define IRQ_U300_MSPRO 69 +#define IRQ_U300_MMCSD_MCIINTR0 70 +#define IRQ_U300_MMCSD_MCIINTR1 71 +#define IRQ_U300_I2C0 72 +#define IRQ_U300_I2C1 73 +#define IRQ_U300_RTC 74 +#define IRQ_U300_NFIF 75 +#define IRQ_U300_NFIF2 76 /* The DB3350-specific interrupt lines */ -#define IRQ_U300_ISP_F0 46 -#define IRQ_U300_ISP_F1 47 -#define IRQ_U300_ISP_F2 48 -#define IRQ_U300_ISP_F3 49 -#define IRQ_U300_ISP_F4 50 -#define IRQ_U300_GPIO_PORT3 51 -#define IRQ_U300_SYSCON_PLL_LOCK 52 -#define IRQ_U300_UART1 53 -#define IRQ_U300_GPIO_PORT4 54 -#define IRQ_U300_GPIO_PORT5 55 -#define IRQ_U300_GPIO_PORT6 56 -#define U300_VIC_IRQS_END 57 - -/* Maximum 8*7 GPIO lines */ -#ifdef CONFIG_PINCTRL_COH901 -#define IRQ_U300_GPIO_BASE (U300_VIC_IRQS_END) -#define IRQ_U300_GPIO_END (IRQ_U300_GPIO_BASE + 56) -#else -#define IRQ_U300_GPIO_END (U300_VIC_IRQS_END) -#endif - -#define NR_IRQS_U300 (IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START) +#define IRQ_U300_ISP_F0 77 +#define IRQ_U300_ISP_F1 78 +#define IRQ_U300_ISP_F2 79 +#define IRQ_U300_ISP_F3 80 +#define IRQ_U300_ISP_F4 81 +#define IRQ_U300_GPIO_PORT3 82 +#define IRQ_U300_SYSCON_PLL_LOCK 83 +#define IRQ_U300_UART1 84 +#define IRQ_U300_GPIO_PORT4 85 +#define IRQ_U300_GPIO_PORT5 86 +#define IRQ_U300_GPIO_PORT6 87 +#define U300_VIC_IRQS_END 88 #endif diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c index 070629a95625..33631c9f1218 100644 --- a/arch/arm/mach-ux500/board-mop500-audio.c +++ b/arch/arm/mach-ux500/board-mop500-audio.c @@ -7,9 +7,8 @@ #include <linux/platform_device.h> #include <linux/init.h> #include <linux/gpio.h> +#include <linux/platform_data/pinctrl-nomadik.h> -#include <plat/gpio-nomadik.h> -#include <plat/pincfg.h> #include <plat/ste_dma40.h> #include <mach/devices.h> diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index a267c6d30e37..c34d4efd0d5c 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -9,10 +9,9 @@ #include <linux/bug.h> #include <linux/string.h> #include <linux/pinctrl/machine.h> +#include <linux/platform_data/pinctrl-nomadik.h> #include <asm/mach-types.h> -#include <plat/pincfg.h> -#include <plat/gpio-nomadik.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 416d436111f2..2d16b1dd5fec 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -16,6 +16,7 @@ #include <linux/io.h> #include <linux/i2c.h> #include <linux/platform_data/i2c-nomadik.h> +#include <linux/platform_data/db8500_thermal.h> #include <linux/gpio.h> #include <linux/amba/bus.h> #include <linux/amba/pl022.h> @@ -37,13 +38,13 @@ #include <linux/of_platform.h> #include <linux/leds.h> #include <linux/pinctrl/consumer.h> +#include <linux/platform_data/pinctrl-nomadik.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> #include <plat/ste_dma40.h> -#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/setup.h> @@ -229,6 +230,67 @@ static struct ab8500_platform_data ab8500_platdata = { }; /* + * Thermal Sensor + */ + +static struct resource db8500_thsens_resources[] = { + { + .name = "IRQ_HOTMON_LOW", + .start = IRQ_PRCMU_HOTMON_LOW, + .end = IRQ_PRCMU_HOTMON_LOW, + .flags = IORESOURCE_IRQ, + }, + { + .name = "IRQ_HOTMON_HIGH", + .start = IRQ_PRCMU_HOTMON_HIGH, + .end = IRQ_PRCMU_HOTMON_HIGH, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct db8500_thsens_platform_data db8500_thsens_data = { + .trip_points[0] = { + .temp = 70000, + .type = THERMAL_TRIP_ACTIVE, + .cdev_name = { + [0] = "thermal-cpufreq-0", + }, + }, + .trip_points[1] = { + .temp = 75000, + .type = THERMAL_TRIP_ACTIVE, + .cdev_name = { + [0] = "thermal-cpufreq-0", + }, + }, + .trip_points[2] = { + .temp = 80000, + .type = THERMAL_TRIP_ACTIVE, + .cdev_name = { + [0] = "thermal-cpufreq-0", + }, + }, + .trip_points[3] = { + .temp = 85000, + .type = THERMAL_TRIP_CRITICAL, + }, + .num_trips = 4, +}; + +static struct platform_device u8500_thsens_device = { + .name = "db8500-thermal", + .resource = db8500_thsens_resources, + .num_resources = ARRAY_SIZE(db8500_thsens_resources), + .dev = { + .platform_data = &db8500_thsens_data, + }, +}; + +static struct platform_device u8500_cpufreq_cooling_device = { + .name = "db8500-cpufreq-cooling", +}; + +/* * TPS61052 */ @@ -583,6 +645,8 @@ static struct platform_device *snowball_platform_devs[] __initdata = { &snowball_key_dev, &snowball_sbnet_dev, &snowball_gpio_en_3v3_regulator_dev, + &u8500_thsens_device, + &u8500_cpufreq_cooling_device, }; static void __init mop500_init_machine(void) diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index bcdfe6b1d453..91f028c1264a 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -17,14 +17,14 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/mfd/abx500/ab8500.h> +#include <linux/platform_data/usb-musb-ux500.h> +#include <linux/platform_data/pinctrl-nomadik.h> #include <asm/pmu.h> #include <asm/mach/map.h> -#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> -#include <linux/platform_data/usb-musb-ux500.h> #include <mach/db8500-regs.h> #include "devices-db8500.h" @@ -158,7 +158,7 @@ static void __init db8500_add_gpios(struct device *parent) dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base), IRQ_DB8500_GPIO0, &pdata); - dbx500_add_pinctrl(parent, "pinctrl-db8500"); + dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE); } static int usb_db8500_rx_dma_cfg[] = { @@ -214,9 +214,6 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) db8500_add_gpios(parent); db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); - platform_device_register_data(parent, - "cpufreq-u8500", -1, NULL, 0); - for (i = 0; i < ARRAY_SIZE(platform_devs); i++) platform_devs[i]->dev.parent = parent; @@ -236,9 +233,6 @@ struct device * __init u8500_of_init_devices(void) db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); - platform_device_register_data(parent, - "cpufreq-u8500", -1, NULL, 0); - u8500_dma40_device.dev.parent = parent; /* diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c index dfdd4a54668d..692a77a1c153 100644 --- a/arch/arm/mach-ux500/devices-common.c +++ b/arch/arm/mach-ux500/devices-common.c @@ -11,8 +11,7 @@ #include <linux/irq.h> #include <linux/slab.h> #include <linux/platform_device.h> - -#include <plat/gpio-nomadik.h> +#include <linux/platform_data/pinctrl-nomadik.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h index 7fbf0ba336e1..96fa4ac89e2e 100644 --- a/arch/arm/mach-ux500/devices-common.h +++ b/arch/arm/mach-ux500/devices-common.h @@ -129,12 +129,18 @@ void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num, int irq, struct nmk_gpio_platform_data *pdata); static inline void -dbx500_add_pinctrl(struct device *parent, const char *name) +dbx500_add_pinctrl(struct device *parent, const char *name, + resource_size_t base) { + struct resource res[] = { + DEFINE_RES_MEM(base, SZ_8K), + }; struct platform_device_info pdevinfo = { .parent = parent, .name = name, .id = -1, + .res = res, + .num_res = ARRAY_SIZE(res), }; platform_device_register_full(&pdevinfo); diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 560e0df728f8..359f782c747d 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -589,7 +589,7 @@ void __init v2m_dt_init_early(void) return; /* Confirm board type against DT property, if available */ - if (of_property_read_u32(allnodes, "arm,hbi", &dt_hbi) == 0) { + if (of_property_read_u32(of_allnodes, "arm,hbi", &dt_hbi) == 0) { int site = v2m_get_master_site(); u32 id = readl(v2m_sysreg_base + (site == SYS_CFG_SITE_DB2 ? V2M_SYS_PROCID1 : V2M_SYS_PROCID0)); diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 023f443784ec..b820edaf3184 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -745,7 +745,7 @@ do_alignment_t32_to_handler(unsigned long *pinstr, struct pt_regs *regs, static int do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { - union offset_union offset; + union offset_union uninitialized_var(offset); unsigned long instr = 0, instrptr; int (*handler)(unsigned long addr, unsigned long instr, struct pt_regs *regs); unsigned int type; diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index ce8cb1970d7a..10062ceadd1c 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -11,18 +11,6 @@ #include <linux/random.h> #include <asm/cachetype.h> -static inline unsigned long COLOUR_ALIGN_DOWN(unsigned long addr, - unsigned long pgoff) -{ - unsigned long base = addr & ~(SHMLBA-1); - unsigned long off = (pgoff << PAGE_SHIFT) & (SHMLBA-1); - - if (base + off <= addr) - return base + off; - - return base - off; -} - #define COLOUR_ALIGN(addr,pgoff) \ ((((addr)+SHMLBA-1)&~(SHMLBA-1)) + \ (((pgoff)<<PAGE_SHIFT) & (SHMLBA-1))) @@ -69,9 +57,9 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, { struct mm_struct *mm = current->mm; struct vm_area_struct *vma; - unsigned long start_addr; int do_align = 0; int aliasing = cache_is_vipt_aliasing(); + struct vm_unmapped_area_info info; /* * We only need to do colour alignment if either the I or D @@ -104,46 +92,14 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, (!vma || addr + len <= vma->vm_start)) return addr; } - if (len > mm->cached_hole_size) { - start_addr = addr = mm->free_area_cache; - } else { - start_addr = addr = mm->mmap_base; - mm->cached_hole_size = 0; - } -full_search: - if (do_align) - addr = COLOUR_ALIGN(addr, pgoff); - else - addr = PAGE_ALIGN(addr); - - for (vma = find_vma(mm, addr); ; vma = vma->vm_next) { - /* At this point: (!vma || addr < vma->vm_end). */ - if (TASK_SIZE - len < addr) { - /* - * Start a new search - just in case we missed - * some holes. - */ - if (start_addr != TASK_UNMAPPED_BASE) { - start_addr = addr = TASK_UNMAPPED_BASE; - mm->cached_hole_size = 0; - goto full_search; - } - return -ENOMEM; - } - if (!vma || addr + len <= vma->vm_start) { - /* - * Remember the place where we stopped the search: - */ - mm->free_area_cache = addr + len; - return addr; - } - if (addr + mm->cached_hole_size < vma->vm_start) - mm->cached_hole_size = vma->vm_start - addr; - addr = vma->vm_end; - if (do_align) - addr = COLOUR_ALIGN(addr, pgoff); - } + info.flags = 0; + info.length = len; + info.low_limit = mm->mmap_base; + info.high_limit = TASK_SIZE; + info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0; + info.align_offset = pgoff << PAGE_SHIFT; + return vm_unmapped_area(&info); } unsigned long @@ -156,6 +112,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, unsigned long addr = addr0; int do_align = 0; int aliasing = cache_is_vipt_aliasing(); + struct vm_unmapped_area_info info; /* * We only need to do colour alignment if either the I or D @@ -187,70 +144,27 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, return addr; } - /* check if free_area_cache is useful for us */ - if (len <= mm->cached_hole_size) { - mm->cached_hole_size = 0; - mm->free_area_cache = mm->mmap_base; - } - - /* either no address requested or can't fit in requested address hole */ - addr = mm->free_area_cache; - if (do_align) { - unsigned long base = COLOUR_ALIGN_DOWN(addr - len, pgoff); - addr = base + len; - } - - /* make sure it can fit in the remaining address space */ - if (addr > len) { - vma = find_vma(mm, addr-len); - if (!vma || addr <= vma->vm_start) - /* remember the address as a hint for next time */ - return (mm->free_area_cache = addr-len); - } - - if (mm->mmap_base < len) - goto bottomup; - - addr = mm->mmap_base - len; - if (do_align) - addr = COLOUR_ALIGN_DOWN(addr, pgoff); - - do { - /* - * Lookup failure means no vma is above this address, - * else if new region fits below vma->vm_start, - * return with success: - */ - vma = find_vma(mm, addr); - if (!vma || addr+len <= vma->vm_start) - /* remember the address as a hint for next time */ - return (mm->free_area_cache = addr); + info.flags = VM_UNMAPPED_AREA_TOPDOWN; + info.length = len; + info.low_limit = PAGE_SIZE; + info.high_limit = mm->mmap_base; + info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0; + info.align_offset = pgoff << PAGE_SHIFT; + addr = vm_unmapped_area(&info); - /* remember the largest hole we saw so far */ - if (addr + mm->cached_hole_size < vma->vm_start) - mm->cached_hole_size = vma->vm_start - addr; - - /* try just below the current vma->vm_start */ - addr = vma->vm_start - len; - if (do_align) - addr = COLOUR_ALIGN_DOWN(addr, pgoff); - } while (len < vma->vm_start); - -bottomup: /* * A failed mmap() very likely causes application failure, * so fall back to the bottom-up function here. This scenario * can happen with large stack limits and large mmap() * allocations. */ - mm->cached_hole_size = ~0UL; - mm->free_area_cache = TASK_UNMAPPED_BASE; - addr = arch_get_unmapped_area(filp, addr0, len, pgoff, flags); - /* - * Restore the topdown base: - */ - mm->free_area_cache = mm->mmap_base; - mm->cached_hole_size = ~0UL; + if (addr & ~PAGE_MASK) { + VM_BUG_ON(addr != -ENOMEM); + info.flags = 0; + info.low_limit = mm->mmap_base; + info.high_limit = TASK_SIZE; + addr = vm_unmapped_area(&info); + } return addr; } @@ -279,7 +193,7 @@ void arch_pick_mmap_layout(struct mm_struct *mm) * You really shouldn't be using read() or write() on /dev/mem. This * might go away in the future. */ -int valid_phys_addr_range(unsigned long addr, size_t size) +int valid_phys_addr_range(phys_addr_t addr, size_t size) { if (addr < PHYS_OFFSET) return 0; diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 86b8b480634f..09c5233f4dfc 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -89,7 +89,7 @@ ENTRY(cpu_v6_dcache_clean_area) mov pc, lr /* - * cpu_arm926_switch_mm(pgd_phys, tsk) + * cpu_v6_switch_mm(pgd_phys, tsk) * * Set the translation table base pointer to be pgd_phys * diff --git a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h deleted file mode 100644 index c08a54d9d889..000000000000 --- a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * Structures and registers for GPIO access in the Nomadik SoC - * - * Copyright (C) 2008 STMicroelectronics - * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com> - * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PLAT_NOMADIK_GPIO -#define __PLAT_NOMADIK_GPIO - -/* - * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving - * the "gpio" namespace for generic and cross-machine functions - */ - -/* Register in the logic block */ -#define NMK_GPIO_DAT 0x00 -#define NMK_GPIO_DATS 0x04 -#define NMK_GPIO_DATC 0x08 -#define NMK_GPIO_PDIS 0x0c -#define NMK_GPIO_DIR 0x10 -#define NMK_GPIO_DIRS 0x14 -#define NMK_GPIO_DIRC 0x18 -#define NMK_GPIO_SLPC 0x1c -#define NMK_GPIO_AFSLA 0x20 -#define NMK_GPIO_AFSLB 0x24 -#define NMK_GPIO_LOWEMI 0x28 - -#define NMK_GPIO_RIMSC 0x40 -#define NMK_GPIO_FIMSC 0x44 -#define NMK_GPIO_IS 0x48 -#define NMK_GPIO_IC 0x4c -#define NMK_GPIO_RWIMSC 0x50 -#define NMK_GPIO_FWIMSC 0x54 -#define NMK_GPIO_WKS 0x58 - -/* Alternate functions: function C is set in hw by setting both A and B */ -#define NMK_GPIO_ALT_GPIO 0 -#define NMK_GPIO_ALT_A 1 -#define NMK_GPIO_ALT_B 2 -#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) - -#define NMK_GPIO_ALT_CX_SHIFT 2 -#define NMK_GPIO_ALT_C1 ((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C2 ((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C3 ((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C4 ((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) - -/* Pull up/down values */ -enum nmk_gpio_pull { - NMK_GPIO_PULL_NONE, - NMK_GPIO_PULL_UP, - NMK_GPIO_PULL_DOWN, -}; - -/* Sleep mode */ -enum nmk_gpio_slpm { - NMK_GPIO_SLPM_INPUT, - NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT, - NMK_GPIO_SLPM_NOCHANGE, - NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE, -}; - -extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode); -extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull); -#ifdef CONFIG_PINCTRL_NOMADIK -extern int nmk_gpio_set_mode(int gpio, int gpio_mode); -#else -static inline int nmk_gpio_set_mode(int gpio, int gpio_mode) -{ - return -ENODEV; -} -#endif -extern int nmk_gpio_get_mode(int gpio); - -extern void nmk_gpio_wakeups_suspend(void); -extern void nmk_gpio_wakeups_resume(void); - -extern void nmk_gpio_clocks_enable(void); -extern void nmk_gpio_clocks_disable(void); - -extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up); - -/* - * Platform data to register a block: only the initial gpio/irq number. - */ -struct nmk_gpio_platform_data { - char *name; - int first_gpio; - int first_irq; - int num_gpio; - u32 (*get_secondary_status)(unsigned int bank); - void (*set_ioforce)(bool enable); - bool supports_sleepmode; -}; - -#endif /* __PLAT_NOMADIK_GPIO */ diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h deleted file mode 100644 index 3b8ec60af351..000000000000 --- a/arch/arm/plat-nomadik/include/plat/pincfg.h +++ /dev/null @@ -1,173 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License, version 2 - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * - * Based on arch/arm/mach-pxa/include/mach/mfp.h: - * Copyright (C) 2007 Marvell International Ltd. - * eric miao <eric.miao@marvell.com> - */ - -#ifndef __PLAT_PINCFG_H -#define __PLAT_PINCFG_H - -/* - * pin configurations are represented by 32-bit integers: - * - * bit 0.. 8 - Pin Number (512 Pins Maximum) - * bit 9..10 - Alternate Function Selection - * bit 11..12 - Pull up/down state - * bit 13 - Sleep mode behaviour - * bit 14 - Direction - * bit 15 - Value (if output) - * bit 16..18 - SLPM pull up/down state - * bit 19..20 - SLPM direction - * bit 21..22 - SLPM Value (if output) - * bit 23..25 - PDIS value (if input) - * bit 26 - Gpio mode - * bit 27 - Sleep mode - * - * to facilitate the definition, the following macros are provided - * - * PIN_CFG_DEFAULT - default config (0): - * pull up/down = disabled - * sleep mode = input/wakeup - * direction = input - * value = low - * SLPM direction = same as normal - * SLPM pull = same as normal - * SLPM value = same as normal - * - * PIN_CFG - default config with alternate function - */ - -typedef unsigned long pin_cfg_t; - -#define PIN_NUM_MASK 0x1ff -#define PIN_NUM(x) ((x) & PIN_NUM_MASK) - -#define PIN_ALT_SHIFT 9 -#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT) -#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT) -#define PIN_GPIO (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT) -#define PIN_ALT_A (NMK_GPIO_ALT_A << PIN_ALT_SHIFT) -#define PIN_ALT_B (NMK_GPIO_ALT_B << PIN_ALT_SHIFT) -#define PIN_ALT_C (NMK_GPIO_ALT_C << PIN_ALT_SHIFT) - -#define PIN_PULL_SHIFT 11 -#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT) -#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT) -#define PIN_PULL_NONE (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT) -#define PIN_PULL_UP (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT) -#define PIN_PULL_DOWN (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT) - -#define PIN_SLPM_SHIFT 13 -#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT) -#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT) -#define PIN_SLPM_MAKE_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) -#define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT) -/* These two replace the above in DB8500v2+ */ -#define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT) -#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT) -#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE - -#define PIN_SLPM_GPIO PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */ -#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */ - -#define PIN_DIR_SHIFT 14 -#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT) -#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT) -#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT) -#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT) - -#define PIN_VAL_SHIFT 15 -#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT) -#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT) -#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT) -#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT) - -#define PIN_SLPM_PULL_SHIFT 16 -#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL(x) \ - (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_NONE \ - ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_UP \ - ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_DOWN \ - ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT) - -#define PIN_SLPM_DIR_SHIFT 19 -#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR(x) \ - (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT) - -#define PIN_SLPM_VAL_SHIFT 21 -#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL(x) \ - (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT) - -#define PIN_SLPM_PDIS_SHIFT 23 -#define PIN_SLPM_PDIS_MASK (0x3 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS(x) \ - (((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_NO_CHANGE (0 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_DISABLED (1 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_ENABLED (2 << PIN_SLPM_PDIS_SHIFT) - -#define PIN_LOWEMI_SHIFT 25 -#define PIN_LOWEMI_MASK (0x1 << PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI(x) (((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI_DISABLED (0 << PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI_ENABLED (1 << PIN_LOWEMI_SHIFT) - -#define PIN_GPIOMODE_SHIFT 26 -#define PIN_GPIOMODE_MASK (0x1 << PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE(x) (((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE_DISABLED (0 << PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE_ENABLED (1 << PIN_GPIOMODE_SHIFT) - -#define PIN_SLEEPMODE_SHIFT 27 -#define PIN_SLEEPMODE_MASK (0x1 << PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE(x) (((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE_DISABLED (0 << PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE_ENABLED (1 << PIN_SLEEPMODE_SHIFT) - - -/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */ -#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN) -#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP) -#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE) -#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW) -#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH) - -#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN) -#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP) -#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE) -#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW) -#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH) - -#define PIN_CFG_DEFAULT (0) - -#define PIN_CFG(num, alt) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt)) - -#define PIN_CFG_INPUT(num, alt, pull) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull)) - -#define PIN_CFG_OUTPUT(num, alt, val) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val)) - -extern int nmk_config_pin(pin_cfg_t cfg, bool sleep); -extern int nmk_config_pins(pin_cfg_t *cfgs, int num); -extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num); - -#endif diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index a5683a84c6ee..6013831a043e 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -26,12 +26,14 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/i2c.h> +#include <linux/i2c-omap.h> #include <linux/slab.h> #include <linux/err.h> #include <linux/clk.h> #include <mach/irqs.h> #include <plat/i2c.h> +#include <plat/omap-pm.h> #include <plat/omap_device.h> #define OMAP_I2C_SIZE 0x3f @@ -127,6 +129,16 @@ static inline int omap1_i2c_add_bus(int bus_id) #ifdef CONFIG_ARCH_OMAP2PLUS +/* + * XXX This function is a temporary compatibility wrapper - only + * needed until the I2C driver can be converted to call + * omap_pm_set_max_dev_wakeup_lat() and handle a return code. + */ +static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t) +{ + omap_pm_set_max_mpu_wakeup_lat(dev, t); +} + static inline int omap2_i2c_add_bus(int bus_id) { int l; @@ -158,6 +170,15 @@ static inline int omap2_i2c_add_bus(int bus_id) dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr; pdata->flags = dev_attr->flags; + /* + * When waiting for completion of a i2c transfer, we need to + * set a wake up latency constraint for the MPU. This is to + * ensure quick enough wakeup from idle, when transfer + * completes. + * Only omap3 has support for constraints + */ + if (cpu_is_omap34xx()) + pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat; pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(struct omap_i2c_bus_platform_data), NULL, 0, 0); diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index 8b4e4f2da2f5..346af5b490be 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -126,6 +126,7 @@ struct omap_mmc_platform_data { /* we can put the features above into this variable */ #define HSMMC_HAS_PBIAS (1 << 0) #define HSMMC_HAS_UPDATED_RESET (1 << 1) +#define HSMMC_HAS_HSPE_SUPPORT (1 << 2) unsigned features; int switch_pin; /* gpio (card detect) */ diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index 1957a8516e93..ff9b0aab5281 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -30,35 +30,6 @@ */ #define OMAP_SERIAL_NAME "ttyO" -#define OMAP_MODE13X_SPEED 230400 - -#define OMAP_UART_SCR_TX_EMPTY 0x08 - -/* WER = 0x7F - * Enable module level wakeup in WER reg - */ -#define OMAP_UART_WER_MOD_WKUP 0X7F - -/* Enable XON/XOFF flow control on output */ -#define OMAP_UART_SW_TX 0x04 - -/* Enable XON/XOFF flow control on input */ -#define OMAP_UART_SW_RX 0x04 - -#define OMAP_UART_SYSC_RESET 0X07 -#define OMAP_UART_TCR_TRIG 0X0F -#define OMAP_UART_SW_CLR 0XF0 -#define OMAP_UART_FIFO_CLR 0X06 - -#define OMAP_UART_DMA_CH_FREE -1 - -#define OMAP_MAX_HSUART_PORTS 6 - -#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA - -#define UART_ERRATA_i202_MDR1_ACCESS BIT(0) -#define UART_ERRATA_i291_DMA_FORCEIDLE BIT(1) - struct omap_uart_port_info { bool dma_enabled; /* To specify DMA Mode */ unsigned int uartclk; /* UART clock rate */ @@ -77,30 +48,4 @@ struct omap_uart_port_info { void (*enable_wakeup)(struct device *, bool); }; -struct uart_omap_dma { - u8 uart_dma_tx; - u8 uart_dma_rx; - int rx_dma_channel; - int tx_dma_channel; - dma_addr_t rx_buf_dma_phys; - dma_addr_t tx_buf_dma_phys; - unsigned int uart_base; - /* - * Buffer for rx dma.It is not required for tx because the buffer - * comes from port structure. - */ - unsigned char *rx_buf; - unsigned int prev_rx_dma_pos; - int tx_buf_size; - int tx_dma_used; - int rx_dma_used; - spinlock_t tx_lock; - spinlock_t rx_lock; - /* timer to poll activity on rx dma */ - struct timer_list rx_timer; - unsigned int rx_buf_size; - unsigned int rx_poll_rate; - unsigned int rx_timeout; -}; - #endif /* __OMAP_SERIAL_H__ */ diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index b3349f7b1a2c..1db029438022 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -443,6 +443,11 @@ struct omap_hwmod_omap4_prcm { * in order to complete the reset. Optional clocks will be disabled * again after the reset. * HWMOD_16BIT_REG: Module has 16bit registers + * HWMOD_EXT_OPT_MAIN_CLK: The only main functional clock source for + * this IP block comes from an off-chip source and is not always + * enabled. This prevents the hwmod code from being able to + * enable and reset the IP block early. XXX Eventually it should + * be possible to query the clock framework for this information. */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -453,6 +458,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_NO_IDLEST (1 << 6) #define HWMOD_CONTROL_OPT_CLKS_IN_RESET (1 << 7) #define HWMOD_16BIT_REG (1 << 8) +#define HWMOD_EXT_OPT_MAIN_CLK (1 << 9) /* * omap_hwmod._int_flags definitions diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index 65fce44dce34..b780470d03ea 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -109,15 +109,6 @@ #define OMAP5UART4 OMAP4UART4 #define ZOOM_UART 95 /* Only on zoom2/3 */ -/* This is only used by 8250.c for omap1510 */ -#define is_omap_port(pt) ({int __ret = 0; \ - if ((pt)->port.mapbase == OMAP1_UART1_BASE || \ - (pt)->port.mapbase == OMAP1_UART2_BASE || \ - (pt)->port.mapbase == OMAP1_UART3_BASE) \ - __ret = 1; \ - __ret; \ - }) - #ifndef __ASSEMBLER__ struct omap_board_data; diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index db98e7021f0d..0abd1c469887 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -473,12 +473,13 @@ int s3c2410_dma_enqueue(enum dma_ch channel, void *id, pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n", chan->number, __func__, buf); - if (chan->end == NULL) + if (chan->end == NULL) { pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n", chan->number, __func__, chan); - - chan->end->next = buf; - chan->end = buf; + } else { + chan->end->next = buf; + chan->end = buf; + } } /* if necessary, update the next buffer field */ diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig index f8db7b2deb36..87dbd81bdf51 100644 --- a/arch/arm/plat-spear/Kconfig +++ b/arch/arm/plat-spear/Kconfig @@ -12,6 +12,7 @@ config ARCH_SPEAR13XX bool "ST SPEAr13xx with Device Tree" select ARM_GIC select CPU_V7 + select GPIO_SPEAR_SPICS select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 select PINCTRL diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile index cd60a81163e9..32d05c8219dc 100644 --- a/arch/arm/tools/Makefile +++ b/arch/arm/tools/Makefile @@ -5,6 +5,6 @@ # include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types - $(kecho) ' Generating $@' + @$(kecho) ' Generating $@' @mkdir -p $(dir $@) $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index c834b32af275..3b44e0dd0a93 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -701,11 +701,14 @@ static int __init vfp_init(void) elf_hwcap |= HWCAP_VFPv3; /* - * Check for VFPv3 D16. CPUs in this configuration - * only have 16 x 64bit registers. + * Check for VFPv3 D16 and VFPv4 D16. CPUs in + * this configuration only have 16 x 64bit + * registers. */ if (((fmrx(MVFR0) & MVFR0_A_SIMD_MASK)) == 1) - elf_hwcap |= HWCAP_VFPv3D16; + elf_hwcap |= HWCAP_VFPv3D16; /* also v4-D16 */ + else + elf_hwcap |= HWCAP_VFPD32; } #endif /* diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 59bcb96ac369..f57609275449 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -166,3 +166,14 @@ void free_xenballooned_pages(int nr_pages, struct page **pages) *pages = NULL; } EXPORT_SYMBOL_GPL(free_xenballooned_pages); + +/* In the hypervisor.S file. */ +EXPORT_SYMBOL_GPL(HYPERVISOR_event_channel_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_grant_table_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_xen_version); +EXPORT_SYMBOL_GPL(HYPERVISOR_console_io); +EXPORT_SYMBOL_GPL(HYPERVISOR_sched_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_hvm_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_memory_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_physdev_op); +EXPORT_SYMBOL_GPL(privcmd_call); |