diff options
Diffstat (limited to 'arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts')
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 147 |
1 files changed, 136 insertions, 11 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts index fb87a168fe96..a1c5fdf7d68f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts @@ -32,6 +32,13 @@ }; }; + gmac1_clkin: external-gmac1-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac1_clkin"; + #clock-cells = <0>; + }; + leds { compatible = "gpio-leds"; @@ -60,13 +67,55 @@ }; }; - vcc12v_dcin: vcc12v-dcin { + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable>; + post-power-on-delay-ms = <100>; + power-off-delay-us = <5000000>; + reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>; + }; + + vcc12v_dcin: vcc12v-dcin-regulator { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; regulator-always-on; regulator-boot-on; }; + pcie30_avdd0v9: pcie30-avdd0v9-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; + }; + + pcie30_avdd1v8: pcie30-avdd1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + }; + + /* pi6c pcie clock generator */ + vcc3v3_pi6c_03: vcc3v3-pi6c-03-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pi6c_03"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + vcc3v3_pcie: vcc3v3-pcie-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -79,7 +128,7 @@ vin-supply = <&vcc5v0_sys>; }; - vcc3v3_sys: vcc3v3-sys { + vcc3v3_sys: vcc3v3-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; regulator-always-on; @@ -89,7 +138,7 @@ vin-supply = <&vcc12v_dcin>; }; - vcc5v0_sys: vcc5v0-sys { + vcc5v0_sys: vcc5v0-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; regulator-always-on; @@ -99,7 +148,7 @@ vin-supply = <&vcc12v_dcin>; }; - vcc5v0_usb: vcc5v0-usb { + vcc5v0_usb: vcc5v0-usb-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_usb"; regulator-always-on; @@ -109,7 +158,7 @@ vin-supply = <&vcc12v_dcin>; }; - vcc5v0_usb_host: vcc5v0-usb-host { + vcc5v0_usb_host: vcc5v0-usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; @@ -144,7 +193,7 @@ vin-supply = <&vcc5v0_usb>; }; - vcc_cam: vcc-cam { + vcc_cam: vcc-cam-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; @@ -160,7 +209,7 @@ }; }; - vcc_mipi: vcc-mipi { + vcc_mipi: vcc-mipi-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; @@ -207,16 +256,17 @@ &gmac1 { assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>; - assigned-clock-rates = <0>, <125000000>; - clock_in_out = "output"; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>; + clock_in_out = "input"; phy-handle = <&rgmii_phy1>; phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3>; pinctrl-names = "default"; pinctrl-0 = <&gmac1m1_miim &gmac1m1_tx_bus2 &gmac1m1_rx_bus2 &gmac1m1_rgmii_clk + &gmac1m1_clkinout &gmac1m1_rgmii_bus>; status = "okay"; }; @@ -509,7 +559,6 @@ interrupt-parent = <&gpio0>; interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; #clock-cells = <0>; - clock-frequency = <32768>; clock-output-names = "rtcic_32kout"; pinctrl-names = "default"; pinctrl-0 = <&hym8563_int>; @@ -526,6 +575,11 @@ status = "okay"; }; +&i2s2_2ch { + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + &mdio1 { rgmii_phy1: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; @@ -546,6 +600,19 @@ status = "okay"; }; +&pcie30phy { + phy-supply = <&vcc3v3_pi6c_03>; + status = "okay"; +}; + +&pcie3x2 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie30x2m1_pins>; + reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + &pinctrl { cam { vcc_cam_en: vcc_cam_en { @@ -605,6 +672,26 @@ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + bt { + bt_enable: bt-enable { + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake: bt-host-wake { + rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bt_wake: bt-wake { + rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable: wifi-enable { + rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pmu_io_domains { @@ -649,12 +736,50 @@ status = "okay"; }; +&sdmmc2 { + supports-sdio; + bus-width = <4>; + disable-wp; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sys>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + &tsadc { rockchip,hw-tshut-mode = <1>; rockchip,hw-tshut-polarity = <0>; status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk809 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake &bt_wake &bt_enable>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + /* vddio comes from regulator on module, use IO bank voltage instead */ + }; +}; + &uart2 { status = "okay"; }; |