diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi | 222 |
1 files changed, 222 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi new file mode 100644 index 000000000000..56d787785fd5 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi @@ -0,0 +1,222 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pazquel board device tree source + * + * Copyright 2021 Google LLC. + */ + +/* This file must be included after sc7180-trogdor.dtsi */ +#include <arm/cros-ec-keyboard.dtsi> + +&ap_sar_sensor { + compatible = "semtech,sx9324"; + semtech,ph0-pin = <1 3 3>; + semtech,ph1-pin = <3 1 3>; + semtech,ph2-pin = <1 3 3>; + semtech,ph3-pin = <0 0 0>; + semtech,ph01-resolution = <1024>; + semtech,ph23-resolution = <1024>; + semtech,startup-sensor = <1>; + semtech,ph01-proxraw-strength = <3>; + semtech,ph23-proxraw-strength = <1>; + semtech,avg-pos-strength = <128>; + semtech,input-analog-gain = <0>; + semtech,cs-idle-sleep = "gnd"; + + /delete-property/ svdd-supply; + vdd-supply = <&pp1800_prox>; +}; + +/delete-node/&trackpad; +&ap_tp_i2c { + status = "okay"; + trackpad: trackpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <&pp3300_fp_tp>; + post-power-on-delay-ms = <100>; + hid-descr-addr = <0x0001>; + + wakeup-source; + }; +}; + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + CROS_STD_MAIN_KEYMAP + >; +}; + +&panel { + compatible = "edp-panel"; +}; + +&pp3300_dx_edp { + gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; +}; + +&en_pp3300_dx_edp { + pinmux { + pins = "gpio67"; + }; + + pinconf { + pins = "gpio67"; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "TP_INT_ODL", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "AP_TP_I2C_SDA", + "AP_TP_I2C_SCL", + "TS_RESET_L", + "TS_INT_L", + "", + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "", + "", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "HUB_RST_L", + "", + "", + "", + "", + "", + "AMP_EN", + "P_SENSOR_INT_L", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "", + "HP_IRQ", + "", + "", + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "", + "", + "", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DIN", + "", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "EN_PP3300_DX_EDP", + "AP_SPI_CS0_L", + "", + "", + "", + "", + "", + "", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "CODEC_PWR_EN", + "HUB_EN", + "", + "", + "", + "", + "", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "EDP_BRIJ_EN", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; +}; |