summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts')
-rw-r--r--arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts197
1 files changed, 57 insertions, 140 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
index 5b1bac8f5122..4239c8fda11b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
@@ -26,7 +26,9 @@
chassis-type = "handset";
aliases {
- serial0 = &blsp1_uart2;
+ mmc0 = &sdhc_1; /* eMMC */
+ mmc1 = &sdhc_2; /* SD card */
+ serial0 = &blsp_uart2;
};
chosen {
@@ -43,7 +45,7 @@
button-volume-up {
label = "Volume Up";
- gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
};
@@ -55,21 +57,21 @@
pinctrl-0 = <&gpio_leds_default>;
led-0 {
- gpios = <&msmgpio 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
color = <LED_COLOR_ID_RED>;
default-state = "off";
function = LED_FUNCTION_INDICATOR;
};
led-1 {
- gpios = <&msmgpio 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 9 GPIO_ACTIVE_HIGH>;
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_INDICATOR;
};
led-2 {
- gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
color = <LED_COLOR_ID_BLUE>;
default-state = "off";
function = LED_FUNCTION_INDICATOR;
@@ -78,7 +80,7 @@
usb_id: usb-id {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&msmgpio 117 GPIO_ACTIVE_HIGH>;
+ id-gpio = <&tlmm 117 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb_id_default>;
};
@@ -94,7 +96,7 @@
vdd-supply = <&pm8916_l17>;
vid-supply = <&pm8916_l6>;
- reset-gpios = <&msmgpio 36 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&tlmm 36 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&mag_reset_default>;
@@ -104,7 +106,7 @@
compatible = "kionix,kx023-1025";
reg = <0x1e>;
- interrupt-parent = <&msmgpio>;
+ interrupt-parent = <&tlmm>;
interrupts = <115 IRQ_TYPE_EDGE_RISING>;
vdd-supply = <&pm8916_l17>;
@@ -122,7 +124,7 @@
compatible = "avago,apds9930";
reg = <0x39>;
- interrupt-parent = <&msmgpio>;
+ interrupt-parent = <&tlmm>;
interrupts = <113 IRQ_TYPE_EDGE_FALLING>;
vdd-supply = <&pm8916_l17>;
@@ -146,7 +148,7 @@
regulator-name = "outp";
regulator-min-microvolt = <5400000>;
regulator-max-microvolt = <5400000>;
- enable-gpios = <&msmgpio 97 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&tlmm 97 GPIO_ACTIVE_HIGH>;
regulator-active-discharge = <1>;
};
@@ -154,7 +156,7 @@
regulator-name = "outn";
regulator-min-microvolt = <5400000>;
regulator-max-microvolt = <5400000>;
- enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
regulator-active-discharge = <1>;
};
};
@@ -169,7 +171,7 @@
#address-cells = <1>;
#size-cells = <0>;
- interrupt-parent = <&msmgpio>;
+ interrupt-parent = <&tlmm>;
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
vdd-supply = <&pm8916_l17>;
@@ -199,18 +201,18 @@
compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
reg = <0x28>;
- interrupt-parent = <&msmgpio>;
+ interrupt-parent = <&tlmm>;
interrupts = <21 IRQ_TYPE_EDGE_RISING>;
- enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
- firmware-gpios = <&msmgpio 2 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+ firmware-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&nfc_default>;
};
};
-&blsp1_uart2 {
+&blsp_uart2 {
status = "okay";
};
@@ -218,32 +220,57 @@
status = "okay";
};
+&lpass_codec {
+ status = "okay";
+};
+
+&pm8916_codec {
+ status = "okay";
+ qcom,micbias-lvl = <2800>;
+ qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+ qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+ qcom,hphl-jack-type-normally-open;
+};
+
+&pm8916_l8 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+};
+
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
};
+&pm8916_rpm_regulators {
+ pm8916_l16: l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8916_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+};
+
&pm8916_vib {
status = "okay";
};
&sdhc_1 {
status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
- pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
};
&sdhc_2 {
status = "okay";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdhc2_cd_default>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdhc2_cd_default>;
+ pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
/*
- * The Huawei device tree sets cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>.
+ * The Huawei device tree sets cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>.
* However, gpio38 does not change its state when inserting/removing the
* SD card, it's just low all the time. The Huawei kernel seems to use
* polling for SD card detection instead.
@@ -255,7 +282,7 @@
* Maybe Huawei decided to replace the second SIM card slot with the
* SD card slot and forgot to re-route to gpio38.
*/
- cd-gpios = <&msmgpio 56 GPIO_ACTIVE_LOW>;
+ cd-gpios = <&tlmm 56 GPIO_ACTIVE_LOW>;
};
&sound {
@@ -268,8 +295,8 @@
"AMIC3", "MIC BIAS External1";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&cdc_pdm_lines_act>;
- pinctrl-1 = <&cdc_pdm_lines_sus>;
+ pinctrl-0 = <&cdc_pdm_default>;
+ pinctrl-1 = <&cdc_pdm_sleep>;
primary-dai-link {
link-name = "WCD";
@@ -277,7 +304,7 @@
sound-dai = <&lpass MI2S_PRIMARY>;
};
codec {
- sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
+ sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
};
};
@@ -287,7 +314,7 @@
sound-dai = <&lpass MI2S_TERTIARY>;
};
codec {
- sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
+ sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
};
};
};
@@ -301,13 +328,6 @@
extcon = <&usb_id>;
};
-&wcd_codec {
- qcom,micbias-lvl = <2800>;
- qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
- qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
- qcom,hphl-jack-type-normally-open;
-};
-
&wcnss {
status = "okay";
};
@@ -316,110 +336,7 @@
compatible = "qcom,wcn3620";
};
-&smd_rpm_regulators {
- vdd_l1_l2_l3-supply = <&pm8916_s3>;
- vdd_l4_l5_l6-supply = <&pm8916_s4>;
- vdd_l7-supply = <&pm8916_s4>;
-
- s3 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1300000>;
- };
-
- s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2100000>;
- };
-
- l1 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- l2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- l4 {
- regulator-min-microvolt = <2050000>;
- regulator-max-microvolt = <2050000>;
- };
-
- l5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l8 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- };
-
- l9 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- l10 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2800000>;
- };
-
- l11 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- regulator-allow-set-load;
- regulator-system-load = <200000>;
- };
-
- l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- l13 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
- };
-
- l14 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- l15 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- l16 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l17 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
- l18 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-};
-
-&msmgpio {
+&tlmm {
accel_irq_default: accel-irq-default-state {
pins = "gpio115";
function = "gpio";
@@ -476,7 +393,7 @@
bias-disable;
};
- sdhc2_cd_default: sdhc2-cd-default-state {
+ sdc2_cd_default: sdc2-cd-default-state {
pins = "gpio56";
function = "gpio";
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-23 02:53:10 +0300