diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale')
41 files changed, 3102 insertions, 524 deletions
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 6438db3822f8..44890d56c194 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -33,6 +33,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-qds.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb @@ -47,6 +49,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mq-kontron-pitx-imx8m.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb @@ -57,6 +60,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-thor96.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts index 0516076087ae..a92ecb331cdc 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts @@ -25,6 +25,8 @@ spi1 = &dspi2; mmc0 = &esdhc1; mmc1 = &esdhc; + rtc0 = &rtc; + rtc1 = &ftm_alarm0; }; buttons0 { @@ -115,8 +117,6 @@ status = "okay"; flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "jedec,spi-nor"; m25p,fast-read; spi-max-frequency = <133000000>; @@ -125,49 +125,37 @@ spi-rx-bus-width = <2>; /* 2 SPI Rx lines */ spi-tx-bus-width = <1>; /* 1 SPI Tx line */ - partition@0 { - reg = <0x000000 0x010000>; - label = "rcw"; - read-only; - }; - - partition@10000 { - reg = <0x010000 0x0f0000>; - label = "failsafe bootloader"; - read-only; - }; - - partition@100000 { - reg = <0x100000 0x040000>; - label = "failsafe DP firmware"; - read-only; - }; - - partition@140000 { - reg = <0x140000 0x0a0000>; - label = "failsafe trusted firmware"; - read-only; - }; - - partition@1e0000 { - reg = <0x1e0000 0x020000>; - label = "reserved"; - read-only; - }; - - partition@200000 { - reg = <0x200000 0x010000>; - label = "configuration store"; - }; - - partition@210000 { - reg = <0x210000 0x1d0000>; - label = "bootloader"; - }; - - partition@3e0000 { - reg = <0x3e0000 0x020000>; - label = "bootloader environment"; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x000000 0x010000>; + label = "rcw"; + read-only; + }; + + partition@10000 { + reg = <0x010000 0x1d0000>; + label = "failsafe bootloader"; + read-only; + }; + + partition@200000 { + reg = <0x200000 0x010000>; + label = "configuration store"; + }; + + partition@210000 { + reg = <0x210000 0x1d0000>; + label = "bootloader"; + }; + + partition@3e0000 { + reg = <0x3e0000 0x020000>; + label = "bootloader environment"; + }; }; }; }; @@ -191,7 +179,7 @@ &i2c0 { status = "okay"; - rtc@32 { + rtc: rtc@32 { compatible = "microcrystal,rv8803"; reg = <0x32>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index fbcba9cb8503..bfd14b64567e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -25,6 +25,7 @@ serial1 = &duart1; mmc0 = &esdhc; mmc1 = &esdhc1; + rtc1 = &ftm_alarm0; }; chosen { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index 41ae6e7675ba..9322c6ad8e4a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -21,6 +21,7 @@ serial1 = &duart1; mmc0 = &esdhc; mmc1 = &esdhc1; + rtc1 = &ftm_alarm0; }; chosen { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 262fbad8f0ec..9506f0669ead 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -18,10 +18,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - rtc1 = &ftm_alarm0; - }; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -1027,7 +1023,7 @@ status = "disabled"; fixed-link { - speed = <1000>; + speed = <2500>; full-duplex; }; }; @@ -1114,6 +1110,12 @@ full-duplex; }; }; + + rcec@1f,0 { + reg = <0x00f800 0 0 0 0>; + /* IEP INT_A */ + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + }; }; rcpm: power-controller@1e34040 { diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi index 459dccad8326..afb455210bd0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi @@ -122,6 +122,30 @@ vcc-supply = <&sb_3v3>; }; }; + + sfp0_i2c: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + sfp1_i2c: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + sfp2_i2c: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + sfp3_i2c: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi index 2b63235ca627..17f8e733972a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi @@ -30,6 +30,54 @@ gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; }; }; + + sfp0: sfp-0 { + compatible = "sff,sfp"; + i2c-bus = <&sfp0_i2c>; + mod-def0-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>; + maximum-power-milliwatt = <2000>; + }; + + sfp1: sfp-1 { + compatible = "sff,sfp"; + i2c-bus = <&sfp1_i2c>; + mod-def0-gpio = <&gpio2 9 GPIO_ACTIVE_LOW>; + maximum-power-milliwatt = <2000>; + }; + + sfp2: sfp-2 { + compatible = "sff,sfp"; + i2c-bus = <&sfp2_i2c>; + mod-def0-gpio = <&gpio2 10 GPIO_ACTIVE_LOW>; + maximum-power-milliwatt = <2000>; + }; + + sfp3: sfp-3 { + compatible = "sff,sfp"; + i2c-bus = <&sfp3_i2c>; + mod-def0-gpio = <&gpio2 11 GPIO_ACTIVE_LOW>; + maximum-power-milliwatt = <2000>; + }; +}; + +&dpmac7 { + sfp = <&sfp0>; + managed = "in-band-status"; +}; + +&dpmac8 { + sfp = <&sfp1>; + managed = "in-band-status"; +}; + +&dpmac9 { + sfp = <&sfp2>; + managed = "in-band-status"; +}; + +&dpmac10 { + sfp = <&sfp3>; + managed = "in-band-status"; }; &emdio2 { @@ -44,6 +92,22 @@ status = "okay"; }; +&pcs_mdio7 { + status = "okay"; +}; + +&pcs_mdio8 { + status = "okay"; +}; + +&pcs_mdio9 { + status = "okay"; +}; + +&pcs_mdio10 { + status = "okay"; +}; + &sata0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi new file mode 100644 index 000000000000..9386d1a59e82 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2020 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +#include "imx8-ss-audio.dtsi" +#include "imx8-ss-dma.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi new file mode 100644 index 000000000000..6c8d75ef9250 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2019 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +#include <dt-bindings/clock/imx8-lpcg.h> +#include <dt-bindings/firmware/imx/rsrc.h> + +audio_subsys: bus@59000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x59000000 0x0 0x59000000 0x1000000>; + + audio_ipg_clk: clock-audio-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <120000000>; + clock-output-names = "audio_ipg_clk"; + }; + + dsp_lpcg: clock-controller@59580000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59580000 0x10000>; + #clock-cells = <1>; + clocks = <&audio_ipg_clk>, + <&audio_ipg_clk>, + <&audio_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_7>; + clock-output-names = "dsp_lpcg_adb_clk", + "dsp_lpcg_ipg_clk", + "dsp_lpcg_core_clk"; + power-domains = <&pd IMX_SC_R_DSP>; + }; + + dsp_ram_lpcg: clock-controller@59590000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59590000 0x10000>; + #clock-cells = <1>; + clocks = <&audio_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_4>; + clock-output-names = "dsp_ram_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_DSP_RAM>; + }; + + dsp: dsp@596e8000 { + compatible = "fsl,imx8qxp-dsp"; + reg = <0x596e8000 0x88000>; + clocks = <&dsp_lpcg IMX_LPCG_CLK_5>, + <&dsp_ram_lpcg IMX_LPCG_CLK_4>, + <&dsp_lpcg IMX_LPCG_CLK_7>; + clock-names = "ipg", "ocram", "core"; + power-domains = <&pd IMX_SC_R_MU_13A>, + <&pd IMX_SC_R_MU_13B>, + <&pd IMX_SC_R_DSP>, + <&pd IMX_SC_R_DSP_RAM>; + mbox-names = "txdb0", "txdb1", + "rxdb0", "rxdb1"; + mboxes = <&lsio_mu13 2 0>, + <&lsio_mu13 2 1>, + <&lsio_mu13 3 0>, + <&lsio_mu13 3 1>; + memory-region = <&dsp_reserved>; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi new file mode 100644 index 000000000000..e1e81ca0ca69 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi @@ -0,0 +1,184 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2019 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +#include <dt-bindings/clock/imx8-lpcg.h> +#include <dt-bindings/firmware/imx/rsrc.h> + +conn_subsys: bus@5b000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5b000000 0x0 0x5b000000 0x1000000>; + + conn_axi_clk: clock-conn-axi { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <333333333>; + clock-output-names = "conn_axi_clk"; + }; + + conn_ahb_clk: clock-conn-ahb { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <166666666>; + clock-output-names = "conn_ahb_clk"; + }; + + conn_ipg_clk: clock-conn-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <83333333>; + clock-output-names = "conn_ipg_clk"; + }; + + usdhc1: mmc@5b010000 { + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x5b010000 0x10000>; + clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>, + <&sdhc0_lpcg IMX_LPCG_CLK_5>, + <&sdhc0_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "per", "ahb"; + power-domains = <&pd IMX_SC_R_SDHC_0>; + status = "disabled"; + }; + + usdhc2: mmc@5b020000 { + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x5b020000 0x10000>; + clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>, + <&sdhc1_lpcg IMX_LPCG_CLK_5>, + <&sdhc1_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "per", "ahb"; + power-domains = <&pd IMX_SC_R_SDHC_1>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + usdhc3: mmc@5b030000 { + interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x5b030000 0x10000>; + clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>, + <&sdhc2_lpcg IMX_LPCG_CLK_5>, + <&sdhc2_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "per", "ahb"; + power-domains = <&pd IMX_SC_R_SDHC_2>; + status = "disabled"; + }; + + fec1: ethernet@5b040000 { + reg = <0x5b040000 0x10000>; + interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&enet0_lpcg IMX_LPCG_CLK_4>, + <&enet0_lpcg IMX_LPCG_CLK_2>, + <&enet0_lpcg IMX_LPCG_CLK_1>, + <&enet0_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; + power-domains = <&pd IMX_SC_R_ENET_0>; + status = "disabled"; + }; + + fec2: ethernet@5b050000 { + reg = <0x5b050000 0x10000>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&enet1_lpcg IMX_LPCG_CLK_4>, + <&enet1_lpcg IMX_LPCG_CLK_2>, + <&enet1_lpcg IMX_LPCG_CLK_1>, + <&enet1_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; + power-domains = <&pd IMX_SC_R_ENET_1>; + status = "disabled"; + }; + + /* LPCG clocks */ + sdhc0_lpcg: clock-controller@5b200000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b200000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>, + <&conn_ipg_clk>, <&conn_axi_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "sdhc0_lpcg_per_clk", + "sdhc0_lpcg_ipg_clk", + "sdhc0_lpcg_ahb_clk"; + power-domains = <&pd IMX_SC_R_SDHC_0>; + }; + + sdhc1_lpcg: clock-controller@5b210000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b210000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>, + <&conn_ipg_clk>, <&conn_axi_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "sdhc1_lpcg_per_clk", + "sdhc1_lpcg_ipg_clk", + "sdhc1_lpcg_ahb_clk"; + power-domains = <&pd IMX_SC_R_SDHC_1>; + }; + + sdhc2_lpcg: clock-controller@5b220000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b220000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_SDHC_2 IMX_SC_PM_CLK_PER>, + <&conn_ipg_clk>, <&conn_axi_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "sdhc2_lpcg_per_clk", + "sdhc2_lpcg_ipg_clk", + "sdhc2_lpcg_ahb_clk"; + power-domains = <&pd IMX_SC_R_SDHC_2>; + }; + + enet0_lpcg: clock-controller@5b230000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b230000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>, + <&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "enet0_ipg_root_clk", + "enet0_tx_clk", + "enet0_ahb_clk", + "enet0_ipg_clk", + "enet0_ipg_s_clk"; + power-domains = <&pd IMX_SC_R_ENET_0>; + }; + + enet1_lpcg: clock-controller@5b240000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b240000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>, + <&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "enet1_ipg_root_clk", + "enet1_tx_clk", + "enet1_ahb_clk", + "enet1_ipg_clk", + "enet1_ipg_s_clk"; + power-domains = <&pd IMX_SC_R_ENET_1>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi new file mode 100644 index 000000000000..8b5cad4e2700 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019-2020 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +ddr_subsys: bus@5c000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5c000000 0x0 0x5c000000 0x1000000>; + + ddr-pmu@5c020000 { + compatible = "fsl,imx8-ddr-pmu"; + reg = <0x5c020000 0x10000>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi new file mode 100644 index 000000000000..960a802b8b6e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2019 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +#include <dt-bindings/clock/imx8-lpcg.h> +#include <dt-bindings/firmware/imx/rsrc.h> + +dma_subsys: bus@5a000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5a000000 0x0 0x5a000000 0x1000000>; + + dma_ipg_clk: clock-dma-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <120000000>; + clock-output-names = "dma_ipg_clk"; + }; + + lpuart0: serial@5a060000 { + reg = <0x5a060000 0x1000>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart0_lpcg IMX_LPCG_CLK_4>, + <&uart0_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "baud"; + power-domains = <&pd IMX_SC_R_UART_0>; + status = "disabled"; + }; + + lpuart1: serial@5a070000 { + reg = <0x5a070000 0x1000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart1_lpcg IMX_LPCG_CLK_4>, + <&uart1_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "baud"; + power-domains = <&pd IMX_SC_R_UART_1>; + status = "disabled"; + }; + + lpuart2: serial@5a080000 { + reg = <0x5a080000 0x1000>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart2_lpcg IMX_LPCG_CLK_4>, + <&uart2_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "baud"; + power-domains = <&pd IMX_SC_R_UART_2>; + status = "disabled"; + }; + + lpuart3: serial@5a090000 { + reg = <0x5a090000 0x1000>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart3_lpcg IMX_LPCG_CLK_4>, + <&uart3_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "baud"; + power-domains = <&pd IMX_SC_R_UART_3>; + status = "disabled"; + }; + + uart0_lpcg: clock-controller@5a460000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5a460000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "uart0_lpcg_baud_clk", + "uart0_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_UART_0>; + }; + + uart1_lpcg: clock-controller@5a470000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5a470000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "uart1_lpcg_baud_clk", + "uart1_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_UART_1>; + }; + + uart2_lpcg: clock-controller@5a480000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5a480000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "uart2_lpcg_baud_clk", + "uart2_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_UART_2>; + }; + + uart3_lpcg: clock-controller@5a490000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5a490000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "uart3_lpcg_baud_clk", + "uart3_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_UART_3>; + }; + + i2c0: i2c@5a800000 { + reg = <0x5a800000 0x4000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>; + clock-names = "per"; + assigned-clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_I2C_0>; + status = "disabled"; + }; + + i2c1: i2c@5a810000 { + reg = <0x5a810000 0x4000>; + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>; + clock-names = "per"; + assigned-clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_I2C_1>; + status = "disabled"; + }; + + i2c2: i2c@5a820000 { + reg = <0x5a820000 0x4000>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>; + clock-names = "per"; + assigned-clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_I2C_2>; + status = "disabled"; + }; + + i2c3: i2c@5a830000 { + reg = <0x5a830000 0x4000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>; + clock-names = "per"; + assigned-clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_I2C_3>; + status = "disabled"; + }; + + i2c0_lpcg: clock-controller@5ac00000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5ac00000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "i2c0_lpcg_clk", + "i2c0_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_I2C_0>; + }; + + i2c1_lpcg: clock-controller@5ac10000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5ac10000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "i2c1_lpcg_clk", + "i2c1_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_I2C_1>; + }; + + i2c2_lpcg: clock-controller@5ac20000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5ac20000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "i2c2_lpcg_clk", + "i2c2_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_I2C_2>; + }; + + i2c3_lpcg: clock-controller@5ac30000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5ac30000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "i2c3_lpcg_clk", + "i2c3_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_I2C_3>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi new file mode 100644 index 000000000000..ee4e585a9c39 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi @@ -0,0 +1,311 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2020 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +#include <dt-bindings/clock/imx8-lpcg.h> +#include <dt-bindings/firmware/imx/rsrc.h> + +lsio_subsys: bus@5d000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5d000000 0x0 0x5d000000 0x1000000>; + + lsio_mem_clk: clock-lsio-mem { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + clock-output-names = "lsio_mem_clk"; + }; + + lsio_bus_clk: clock-lsio-bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "lsio_bus_clk"; + }; + + lsio_gpio0: gpio@5d080000 { + reg = <0x5d080000 0x10000>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_0>; + }; + + lsio_gpio1: gpio@5d090000 { + reg = <0x5d090000 0x10000>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_1>; + }; + + lsio_gpio2: gpio@5d0a0000 { + reg = <0x5d0a0000 0x10000>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_2>; + }; + + lsio_gpio3: gpio@5d0b0000 { + reg = <0x5d0b0000 0x10000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_3>; + }; + + lsio_gpio4: gpio@5d0c0000 { + reg = <0x5d0c0000 0x10000>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_4>; + }; + + lsio_gpio5: gpio@5d0d0000 { + reg = <0x5d0d0000 0x10000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_5>; + }; + + lsio_gpio6: gpio@5d0e0000 { + reg = <0x5d0e0000 0x10000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_6>; + }; + + lsio_gpio7: gpio@5d0f0000 { + reg = <0x5d0f0000 0x10000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_7>; + }; + + lsio_mu0: mailbox@5d1b0000 { + reg = <0x5d1b0000 0x10000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lsio_mu1: mailbox@5d1c0000 { + reg = <0x5d1c0000 0x10000>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + }; + + lsio_mu2: mailbox@5d1d0000 { + reg = <0x5d1d0000 0x10000>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lsio_mu3: mailbox@5d1e0000 { + reg = <0x5d1e0000 0x10000>; + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lsio_mu4: mailbox@5d1f0000 { + reg = <0x5d1f0000 0x10000>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lsio_mu13: mailbox@5d280000 { + reg = <0x5d280000 0x10000>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + power-domains = <&pd IMX_SC_R_MU_13A>; + }; + + /* LPCG clocks */ + pwm0_lpcg: clock-controller@5d400000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5d400000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, + <&lsio_bus_clk>, + <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "pwm0_lpcg_ipg_clk", + "pwm0_lpcg_ipg_hf_clk", + "pwm0_lpcg_ipg_s_clk", + "pwm0_lpcg_ipg_slv_clk", + "pwm0_lpcg_ipg_mstr_clk"; + power-domains = <&pd IMX_SC_R_PWM_0>; + }; + + pwm1_lpcg: clock-controller@5d410000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5d410000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>, + <&lsio_bus_clk>, + <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "pwm1_lpcg_ipg_clk", + "pwm1_lpcg_ipg_hf_clk", + "pwm1_lpcg_ipg_s_clk", + "pwm1_lpcg_ipg_slv_clk", + "pwm1_lpcg_ipg_mstr_clk"; + power-domains = <&pd IMX_SC_R_PWM_1>; + }; + + pwm2_lpcg: clock-controller@5d420000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5d420000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>, + <&lsio_bus_clk>, + <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "pwm2_lpcg_ipg_clk", + "pwm2_lpcg_ipg_hf_clk", + "pwm2_lpcg_ipg_s_clk", + "pwm2_lpcg_ipg_slv_clk", + "pwm2_lpcg_ipg_mstr_clk"; + power-domains = <&pd IMX_SC_R_PWM_2>; + }; + + pwm3_lpcg: clock-controller@5d430000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5d430000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>, + <&lsio_bus_clk>, + <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "pwm3_lpcg_ipg_clk", + "pwm3_lpcg_ipg_hf_clk", + "pwm3_lpcg_ipg_s_clk", + "pwm3_lpcg_ipg_slv_clk", + "pwm3_lpcg_ipg_mstr_clk"; + power-domains = <&pd IMX_SC_R_PWM_3>; + }; + + pwm4_lpcg: clock-controller@5d440000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5d440000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_PWM_4 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_4 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_4 IMX_SC_PM_CLK_PER>, + <&lsio_bus_clk>, + <&clk IMX_SC_R_PWM_4 IMX_SC_PM_CLK_PER>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "pwm4_lpcg_ipg_clk", + "pwm4_lpcg_ipg_hf_clk", + "pwm4_lpcg_ipg_s_clk", + "pwm4_lpcg_ipg_slv_clk", + "pwm4_lpcg_ipg_mstr_clk"; + power-domains = <&pd IMX_SC_R_PWM_4>; + }; + + pwm5_lpcg: clock-controller@5d450000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5d450000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_PWM_5 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_5 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_5 IMX_SC_PM_CLK_PER>, + <&lsio_bus_clk>, + <&clk IMX_SC_R_PWM_5 IMX_SC_PM_CLK_PER>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "pwm5_lpcg_ipg_clk", + "pwm5_lpcg_ipg_hf_clk", + "pwm5_lpcg_ipg_s_clk", + "pwm5_lpcg_ipg_slv_clk", + "pwm5_lpcg_ipg_mstr_clk"; + power-domains = <&pd IMX_SC_R_PWM_5>; + }; + + pwm6_lpcg: clock-controller@5d460000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5d460000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_PWM_6 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_6 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_6 IMX_SC_PM_CLK_PER>, + <&lsio_bus_clk>, + <&clk IMX_SC_R_PWM_6 IMX_SC_PM_CLK_PER>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "pwm6_lpcg_ipg_clk", + "pwm6_lpcg_ipg_hf_clk", + "pwm6_lpcg_ipg_s_clk", + "pwm6_lpcg_ipg_slv_clk", + "pwm6_lpcg_ipg_mstr_clk"; + power-domains = <&pd IMX_SC_R_PWM_6>; + }; + + pwm7_lpcg: clock-controller@5d470000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5d470000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_PWM_7 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_7 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_7 IMX_SC_PM_CLK_PER>, + <&lsio_bus_clk>, + <&clk IMX_SC_R_PWM_7 IMX_SC_PM_CLK_PER>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "pwm7_lpcg_ipg_clk", + "pwm7_lpcg_ipg_hf_clk", + "pwm7_lpcg_ipg_s_clk", + "pwm7_lpcg_ipg_slv_clk", + "pwm7_lpcg_ipg_mstr_clk"; + power-domains = <&pd IMX_SC_R_PWM_7>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts new file mode 100644 index 000000000000..5389d6f2beba --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 NXP + * Copyright (c) 2019 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +/dts-v1/; +#include "imx8mm.dtsi" +#include "imx8mm-icore-mx8mm.dtsi" + +/ { + model = "Engicam i.Core MX8M Mini C.TOUCH 2.0"; + compatible = "engicam,icore-mx8mm-ctouch2", "engicam,icore-mx8mm", + "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; +}; + +&fec1 { + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1_gpio: usdhc1gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x41 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + >; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* SD */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>; + cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + max-frequency = <50000000>; + bus-width = <4>; + no-1-8-v; + pm-ignore-notify; + keep-power-in-suspend; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts new file mode 100644 index 000000000000..a4a2ada14835 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 NXP + * Copyright (c) 2019 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +/dts-v1/; +#include "imx8mm.dtsi" +#include "imx8mm-icore-mx8mm.dtsi" + +/ { + model = "Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit"; + compatible = "engicam,icore-mx8mm-edimm2.2", "engicam,icore-mx8mm", + "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; +}; + +&fec1 { + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1_gpio: usdhc1gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x41 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + >; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* SD */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>; + cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + max-frequency = <50000000>; + bus-width = <4>; + no-1-8-v; + pm-ignore-notify; + keep-power-in-suspend; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi new file mode 100644 index 000000000000..b40148d728ea --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi @@ -0,0 +1,232 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 NXP + * Copyright (c) 2019 Engicam srl + * Copyright (c) 2020 Amarula Solutons(India) + */ + +/ { + compatible = "engicam,icore-mx8mm", "fsl,imx8mm"; +}; + +&A53_0 { + cpu-supply = <®_buck4>; +}; + +&A53_1 { + cpu-supply = <®_buck4>; +}; + +&A53_2 { + cpu-supply = <®_buck4>; +}; + +&A53_3 { + cpu-supply = <®_buck4>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + reset-gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@8 { + compatible = "nxp,pf8121a"; + reg = <0x08>; + + regulators { + reg_ldo1: ldo1 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_ldo2: ldo2 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_ldo3: ldo3 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_ldo4: ldo4 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_buck1: buck1 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_buck2: buck2 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_buck3: buck3 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_buck4: buck4 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_buck5: buck5 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_buck6: buck6 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_buck7: buck7 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_vsnvs: vsnvs { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts index c0c384d76147..74c09891600f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts @@ -9,6 +9,53 @@ / { model = "Boundary Devices i.MX8MMini Nitrogen8MM Rev2"; compatible = "boundary,imx8mm-nitrogen8mm", "fsl,imx8mm"; + + reg_vref_1v8: regulator-vref-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vref-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_vref_3v3: regulator-vref-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vref-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_wlan_vmmc: regulator-wlan-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound-wm8960 { + audio-cpu = <&sai1>; + audio-codec = <&wm8960>; + audio-routing = + "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Ext Spk", "SPK_LP", + "Ext Spk", "SPK_LN", + "Ext Spk", "SPK_RP", + "Ext Spk", "SPK_RN", + "RINPUT1", "Mic Jack", + "Mic Jack", "MICB"; + compatible = "fsl,imx-audio-wm8960"; + /* JD2: hp detect high for headphone*/ + hp-det-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + /* Jack is not stuffed */ + mic-det-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + model = "wm8960-audio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sound_wm8960>; + }; }; &A53_0 { @@ -27,6 +74,17 @@ cpu-supply = <®_buck3>; }; +/* J15 */ +&ecspi2 { + assigned-clocks = <&clk IMX8MM_CLK_ECSPI2>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_40M>; + assigned-clock-rates = <40000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; @@ -47,6 +105,12 @@ }; }; +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -156,7 +220,7 @@ #address-cells = <1>; #size-cells = <0>; - i2c3 { + i2c3@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; @@ -173,12 +237,88 @@ }; }; +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + wm8960: codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&clk IMX8MM_CLK_SAI1_ROOT>; + clock-names = "mclk1"; + wlf,shared-lrclk; + #sound-dai-cells = <0>; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + assigned-clocks = <&clk IMX8MM_CLK_PWM2>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_40M>; + assigned-clock-rates = <40000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + status = "okay"; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + status = "okay"; +}; + +/* BT */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + status = "okay"; +}; + /* console */ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - assigned-clocks = <&clk IMX8MM_CLK_UART2>; - assigned-clock-parents = <&clk IMX8MM_CLK_24M>; + status = "okay"; +}; + +/* J15 */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +/* J9 */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; status = "okay"; }; @@ -191,6 +331,8 @@ pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <®_vref_3v3>; + vqmmc-supply = <®_vref_1v8>; status = "okay"; }; @@ -206,6 +348,48 @@ status = "okay"; }; +/* wlan */ +&usdhc3 { + bus-width = <4>; + sdhci-caps-mask = <0x2 0x0>; + non-removable; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + vmmc-supply = <®_wlan_vmmc>; + vqmmc-supply = <®_vref_1v8>; + status = "okay"; +}; + +/* USB OTG port */ +&usbotg1 { + dr_mode = "otg"; + over-current-active-low; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + power-active-high; + status = "okay"; +}; + +/* USB Host port */ +&usbotg2 { + dr_mode = "host"; + over-current-active-low; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2>; + power-active-high; + /* + * FIXME: having USB2 enabled hangs the boot just after: + *[ 1.655941] ci_hdrc ci_hdrc.1: EHCI Host Controller + *[ 1.660880] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 + *[ 1.681505] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 + *[ 1.687730] hub 2-0:1.0: USB hub found + *[ 1.691528] hub 2-0:1.0: 1 port detected + */ + status = "disabled"; +}; + &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; @@ -217,6 +401,15 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x140 + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x19 + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x19 + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x19 + >; + }; + pinctrl_fec1: fec1grp { fsl,pins = < MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 @@ -237,6 +430,17 @@ >; }; + pinctrl_flexspi: flexspigrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2 + MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 + MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 + MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 + MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 + MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 + >; + }; + pinctrl_hog: hoggrp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x09 @@ -258,12 +462,86 @@ >; }; + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + pinctrl_i2c3a_rv4162: i2c3a-rv4162grp { fsl,pins = < MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x1c0 >; }; + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x16 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x16 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT 0x16 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_MCLK_PWM4_OUT 0x16 + >; + }; + + pinctrl_reg_wlan_vmmc: reg-wlan-vmmcgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x16 + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + /* wm8960 */ + MX8MM_IOMUXC_SAI1_MCLK_SAI1_MCLK 0xd6 + MX8MM_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC 0xd6 + MX8MM_IOMUXC_SAI1_TXC_SAI1_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0 0xd6 + MX8MM_IOMUXC_SAI1_RXD0_SAI1_RX_DATA0 0xd6 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + /* Bluetooth PCM */ + MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 + MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 + MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 + >; + }; + + pinctrl_sound_wm8960: sound-wm8960grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x80 + MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x80 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140 + MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 @@ -271,6 +549,36 @@ >; }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x140 + MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x140 + MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x140 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140 + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x16 + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x156 + >; + }; + + pinctrl_usbotg2: usbotg2grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO14_USB2_OTG_PWR 0x16 + MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC 0x15 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 6bf1d15ba16a..a27e02bee6b4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -887,7 +887,7 @@ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MM_CLK_QSPI_ROOT>, <&clk IMX8MM_CLK_QSPI_ROOT>; - clock-names = "fspi", "fspi_en"; + clock-names = "fspi_en", "fspi"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi index de2cd0e3201c..c35eeaff958f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi @@ -262,8 +262,12 @@ &usdhc1 { #address-cells = <1>; #size-cells = <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <&buck4_reg>; + vqmmc-supply = <&buck5_reg>; bus-width = <4>; non-removable; cap-power-off-card; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 16ea50089567..4dac4da38f4c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -898,7 +898,7 @@ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MN_CLK_QSPI_ROOT>, <&clk IMX8MN_CLK_QSPI_ROOT>; - clock-names = "fspi", "fspi_en"; + clock-names = "fspi_en", "fspi"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index 7db4273cc88b..2c28e589677e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -98,6 +98,8 @@ reg = <1>; eee-broken-1000t; reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <80000>; }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts index 122c95ddad30..984a6b9ded8d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts @@ -16,7 +16,7 @@ "phytec,imx8mp-phycore-som", "fsl,imx8mp"; chosen { - stdout-path = &uart2; + stdout-path = &uart1; }; reg_usdhc2_vmmc: regulator-usdhc2 { @@ -33,6 +33,30 @@ }; }; +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + enet-phy-lane-no-swap; + }; + }; +}; + &i2c2 { clock-frequency = <400000>; pinctrl-names = "default", "gpio"; @@ -71,9 +95,9 @@ }; /* debug console */ -&uart2 { +&uart1 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; + pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; @@ -90,6 +114,26 @@ }; &iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f + MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x10 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3 @@ -110,10 +154,10 @@ >; }; - pinctrl_uart2: uart2grp { + pinctrl_uart1: uart1grp { fsl,pins = < - MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49 - MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49 + MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x49 + MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x49 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 4967d72f41f6..c2d51a46cb3c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -18,6 +18,7 @@ aliases { ethernet0 = &fec; + ethernet1 = &eqos; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -312,6 +313,22 @@ status = "disabled"; }; + wdog2: watchdog@30290000 { + compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt"; + reg = <0x30290000 0x10000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_WDOG2_ROOT>; + status = "disabled"; + }; + + wdog3: watchdog@302a0000 { + compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt"; + reg = <0x302a0000 0x10000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_WDOG3_ROOT>; + status = "disabled"; + }; + iomuxc: pinctrl@30330000 { compatible = "fsl,imx8mp-iomuxc"; reg = <0x30330000 0x10000>; @@ -786,6 +803,28 @@ nvmem_macaddr_swap; status = "disabled"; }; + + eqos: ethernet@30bf0000 { + compatible = "nxp,imx8mp-dwmac-eqos", "snps,dwmac-5.10a"; + reg = <0x30bf0000 0x10000>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eth_wake_irq", "macirq"; + clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>, + <&clk IMX8MP_CLK_QOS_ENET_ROOT>, + <&clk IMX8MP_CLK_ENET_QOS_TIMER>, + <&clk IMX8MP_CLK_ENET_QOS>; + clock-names = "stmmaceth", "pclk", "ptp_ref", "tx"; + assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>, + <&clk IMX8MP_CLK_ENET_QOS_TIMER>, + <&clk IMX8MP_CLK_ENET_QOS>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>, + <&clk IMX8MP_SYS_PLL2_100M>, + <&clk IMX8MP_SYS_PLL2_125M>; + assigned-clock-rates = <0>, <100000000>, <125000000>; + intf_mode = <&gpr 0x4>; + status = "disabled"; + }; }; gic: interrupt-controller@38800000 { diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts new file mode 100644 index 000000000000..f593e4ff62e1 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts @@ -0,0 +1,613 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree File for the Kontron pitx-imx8m board. + * + * Copyright (C) 2021 Heiko Thiery <heiko.thiery@gmail.com> + */ + +/dts-v1/; + +#include "imx8mq.dtsi" +#include <dt-bindings/net/ti-dp83867.h> + +/ { + model = "Kontron pITX-imx8m"; + compatible = "kontron,pitx-imx8m", "fsl,imx8mq"; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + spi0 = &qspi0; + spi1 = &ecspi2; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + pcie0_refclk: pcie0-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + pcie1_refclk: pcie1-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + reg_usdhc2_vmmc: regulator-usdhc2-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2>; + regulator-name = "V_3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + off-on-delay-us = <20000>; + enable-active-high; + }; +}; + +&ecspi2 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; + + tpm@0 { + compatible = "infineon,slb9670"; + reg = <0>; + spi-max-frequency = <43000000>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <280>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@8 { + compatible = "fsl,pfuze100"; + fsl,pfuze-support-disable-sw; + reg = <0x8>; + + regulators { + sw1a_reg: sw1ab { + regulator-name = "V_0V9_GPU"; + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + }; + + sw1c_reg: sw1c { + regulator-name = "V_0V9_VPU"; + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + }; + + sw2_reg: sw2 { + regulator-name = "V_1V1_NVCC_DRAM"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + sw3a_reg: sw3ab { + regulator-name = "V_1V0_DRAM"; + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-name = "V_1V8_S0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-name = "NC"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-name = "V_0V9_SNVS"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-name = "V_0V55_VREF_DDR"; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-name = "V_1V5_CSI"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-name = "V_0V9_PHY"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <975000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-name = "V_1V8_PHY"; + regulator-min-microvolt = <1675000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-name = "V_1V8_VDDA"; + regulator-min-microvolt = <1625000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-name = "V_3V3_PHY"; + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3625000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-name = "V_2V8_CAM"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + fan-controller@1b { + compatible = "maxim,max6650"; + reg = <0x1b>; + maxim,fan-microvolt = <5000000>; + }; + + rtc@32 { + compatible = "microcrystal,rv8803"; + reg = <0x32>; + }; + + sensor@4b { + compatible = "national,lm75b"; + reg = <0x4b>; + }; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +/* M.2 B-key slot */ +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>, + <&clk IMX8MQ_CLK_PCIE1_AUX>, + <&clk IMX8MQ_CLK_PCIE1_PHY>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + status = "okay"; +}; + +/* Intel Ethernet Controller I210/I211 */ +&pcie1 { + clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, + <&clk IMX8MQ_CLK_PCIE2_AUX>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&pcie1_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + fsl,max-link-speed = <1>; + status = "okay"; +}; + +&pgc_gpu { + power-supply = <&sw1a_reg>; +}; + +&pgc_vpu { + power-supply = <&sw1c_reg>; +}; + +&qspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + m25p,fast-read; + spi-max-frequency = <50000000>; + }; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clk IMX8MQ_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clk IMX8MQ_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + assigned-clocks = <&clk IMX8MQ_CLK_UART3>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&usb_dwc3_0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>; + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + maximum-speed = "high-speed"; + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vqmmc-supply = <&sw4_reg>; + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + bus-width = <4>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 /* TPM Reset */ + MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x19 /* USB2 Hub Reset */ + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x19 /* GPIO0 */ + MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15 0x19 /* GPIO1 */ + MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17 0x19 /* GPIO2 */ + MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18 0x19 /* GPIO3 */ + MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 /* GPIO4 */ + MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x19 /* GPIO5 */ + MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x19 /* GPIO6 */ + MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x19 /* GPIO7 */ + >; + }; + + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x16 /* PCIE_PERST */ + MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29 0x16 /* W_DISABLE */ + >; + }; + + pinctrl_reg_usdhc2: regusdhc2gpiogrp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23 + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x16 + MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x16 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f + >; + }; + + pinctrl_qspi: qspigrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82 + MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 + MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 + MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 + MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 + MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x19 + MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x19 + MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x19 + >; + }; + + pinctrl_ecspi2_cs: ecspi2csgrp { + fsl,pins = < + MX8MQ_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x19 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49 + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49 + MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49 + MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x49 + MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x49 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 + MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20 0x19 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcd + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xdf + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xdf + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xdf + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xdf + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xdf + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usb0: usb0grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x19 + MX8MQ_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x19 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts index dd217a0760e9..622f3787a186 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts @@ -50,13 +50,6 @@ linux,code = <KEY_VOLUMEDOWN>; }; - hp-det { - label = "HP_DET"; - gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; - wakeup-source; - linux,code = <KEY_HP>; - }; - wwan-wake { label = "WWAN_WAKE"; gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; @@ -163,21 +156,35 @@ #sound-dai-cells = <0>; }; + mic_mux: mic-mux { + compatible = "simple-audio-mux"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_micsel>; + mux-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; + sound-name-prefix = "Mic Mux"; + }; + sound { compatible = "simple-audio-card"; - simple-audio-card,name = "sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hpdet>; + simple-audio-card,aux-devs = <&speaker_amp>, <&mic_mux>; + simple-audio-card,name = "Librem 5 Devkit"; simple-audio-card,format = "i2s"; simple-audio-card,widgets = - "Microphone", "Microphone Jack", - "Headphone", "Headphone Jack", - "Speaker", "Speaker Ext", - "Line", "Line In Jack"; + "Microphone", "Builtin Microphone", + "Microphone", "Headset Microphone", + "Headphone", "Headphones", + "Speaker", "Builtin Speaker"; simple-audio-card,routing = - "MIC_IN", "Microphone Jack", - "Microphone Jack", "Mic Bias", - "LINE_IN", "Line In Jack", - "Headphone Jack", "HP_OUT", - "Speaker Ext", "LINE_OUT"; + "MIC_IN", "Mic Mux OUT", + "Mic Mux IN1", "Headset Microphone", + "Mic Mux IN2", "Builtin Microphone", + "Mic Mux OUT", "Mic Bias", + "Headphones", "HP_OUT", + "Builtin Speaker", "Speaker Amp OUTR", + "Speaker Amp INR", "LINE_OUT"; + simple-audio-card,hp-det-gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; simple-audio-card,cpu { sound-dai = <&sai2>; @@ -207,6 +214,15 @@ }; }; + speaker_amp: speaker-amp { + compatible = "simple-audio-amplifier"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spkamp>; + VCC-supply = <®_3v3_p>; + sound-name-prefix = "Speaker Amp"; + enable-gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; + }; + vibrator { compatible = "gpio-vibrator"; pinctrl-names = "default"; @@ -315,7 +331,6 @@ regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; - regulator-enable-ramp-delay = <200>; rohm,dvs-run-voltage = <900000>; }; @@ -610,7 +625,6 @@ fsl,pins = < MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x16 MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22 0x16 - MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x180 /* HP_DET */ MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8 0x80 /* nWoWWAN */ >; }; @@ -621,6 +635,12 @@ >; }; + pinctrl_hpdet: hpdetgrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0xC0 /* HP_DET */ + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000001f @@ -641,6 +661,18 @@ >; }; + pinctrl_micsel: micselgrp { + fsl,pins = < + MX8MQ_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0xc6 /* MIC_SEL */ + >; + }; + + pinctrl_spkamp: spkamp { + fsl,pins = < + MX8MQ_IOMUXC_SPDIF_TX_GPIO5_IO3 0x81 /* MUTE */ + >; + }; + pinctrl_pmic: pmicgrp { fsl,pins = < MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x80 /* PMIC intr */ diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts index d77fc5df3f06..73bd431cbd6a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts @@ -25,5 +25,5 @@ }; &proximity { - proximity-near-level = <220>; + proximity-near-level = <120>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts index 0d38327043f8..cd3c3edd48fa 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts @@ -28,6 +28,10 @@ ti,termination-current = <144000>; /* uA */ }; +&buck3_reg { + regulator-always-on; +}; + &proximity { proximity-near-level = <25>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index 06a4799b6aeb..460ef0d86540 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -258,6 +258,25 @@ compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "protected0"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "protected1"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "rw"; + reg = <0x40000 0x1C0000>; + }; }; }; @@ -267,8 +286,9 @@ pmic-5v-hog { gpio-hog; - gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + gpios = <1 GPIO_ACTIVE_HIGH>; input; + lane-mapping = "pmic-5v"; }; }; @@ -1051,8 +1071,6 @@ assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; assigned-clock-rates = <24576000>; - assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>; - assigned-clock-rates = <786432000>, <722534400>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts new file mode 100644 index 000000000000..ce9d3f0b98fc --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2019 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +/dts-v1/; + +#include "imx8qm.dtsi" + +/ { + model = "Freescale i.MX8QM MEK"; + compatible = "fsl,imx8qm-mek", "fsl,imx8qm"; + + chosen { + stdout-path = &lpuart0; + }; + + cpus { + /delete-node/ cpu-map; + /delete-node/ cpu@100; + /delete-node/ cpu@101; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x40000000>; + }; + + reg_usdhc2_vmmc: usdhc2-vmmc { + compatible = "regulator-fixed"; + regulator-name = "SD1_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>; + wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + IMX8QM_ENET0_MDC_CONN_ENET0_MDC 0x06000020 + IMX8QM_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 + IMX8QM_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020 + IMX8QM_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020 + IMX8QM_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020 + IMX8QM_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020 + IMX8QM_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020 + IMX8QM_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020 + IMX8QM_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020 + IMX8QM_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020 + IMX8QM_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020 + IMX8QM_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020 + IMX8QM_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020 + IMX8QM_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020 + >; + }; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + IMX8QM_UART0_RX_DMA_UART0_RX 0x06000020 + IMX8QM_UART0_TX_DMA_UART0_TX 0x06000020 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 + IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 + IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 + IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 + IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 + IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 + IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi new file mode 100644 index 000000000000..42637a45701c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019-2020 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +&fec1 { + compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec"; +}; + +&fec2 { + compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec"; +}; + +&usdhc1 { + compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; +}; + +&usdhc2 { + compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi new file mode 100644 index 000000000000..bbe5f5ecfb92 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2019 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +&dma_subsys { + uart4_lpcg: clock-controller@5a4a0000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5a4a0000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_UART_4 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "uart4_lpcg_baud_clk", + "uart4_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_UART_4>; + }; +}; + +&lpuart0 { + compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; +}; + +&lpuart1 { + compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; +}; + +&lpuart2 { + compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; +}; + +&lpuart3 { + compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; +}; + +&i2c0 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; +}; + +&i2c1 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; +}; + +&i2c2 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; +}; + +&i2c3 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi new file mode 100644 index 000000000000..30896610c654 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019-2020 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +&lsio_gpio0 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio1 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio2 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio3 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio4 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio5 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio6 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio7 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; +}; + +&lsio_mu0 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu1 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu2 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu3 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu4 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu13 { + compatible = "fsl,imx8qm-mu", "fsl,imx6sx-mu"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi new file mode 100644 index 000000000000..12cd059b339b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi @@ -0,0 +1,176 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2019 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +#include <dt-bindings/clock/imx8-lpcg.h> +#include <dt-bindings/firmware/imx/rsrc.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/pads-imx8qm.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &lpuart0; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&A53_0>; + }; + core1 { + cpu = <&A53_1>; + }; + core2 { + cpu = <&A53_2>; + }; + core3 { + cpu = <&A53_3>; + }; + }; + + cluster1 { + core0 { + cpu = <&A72_0>; + }; + core1 { + cpu = <&A72_1>; + }; + }; + }; + + A53_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A72_0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&A72_L2>; + }; + + A72_1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x101>; + enable-method = "psci"; + next-level-cache = <&A72_L2>; + }; + + A53_L2: l2-cache0 { + compatible = "cache"; + }; + + A72_L2: l2-cache1 { + compatible = "cache"; + }; + }; + + gic: interrupt-controller@51a00000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */ + <0x0 0x51b00000 0 0xC0000>, /* GICR */ + <0x0 0x52000000 0 0x2000>, /* GICC */ + <0x0 0x52010000 0 0x1000>, /* GICH */ + <0x0 0x52020000 0 0x20000>; /* GICV */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */ + }; + + scu { + compatible = "fsl,imx-scu"; + mbox-names = "tx0", + "rx0", + "gip3"; + mboxes = <&lsio_mu1 0 0 + &lsio_mu1 1 0 + &lsio_mu1 3 3>; + + pd: imx8qx-pd { + compatible = "fsl,imx8qm-scu-pd", "fsl,scu-pd"; + #power-domain-cells = <1>; + }; + + clk: clock-controller { + compatible = "fsl,imx8qxp-clk", "fsl,scu-clk"; + #clock-cells = <2>; + }; + + iomuxc: pinctrl { + compatible = "fsl,imx8qm-iomuxc"; + }; + + }; + + /* sorted in register address */ + #include "imx8-ss-dma.dtsi" + #include "imx8-ss-conn.dtsi" + #include "imx8-ss-lsio.dtsi" +}; + +#include "imx8qm-ss-dma.dtsi" +#include "imx8qm-ss-conn.dtsi" +#include "imx8qm-ss-lsio.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts index a3f8cf195974..47bb68823b24 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts @@ -13,13 +13,13 @@ compatible = "einfochips,imx8qxp-ai_ml", "fsl,imx8qxp"; aliases { - serial1 = &adma_lpuart1; - serial2 = &adma_lpuart2; - serial3 = &adma_lpuart3; + serial1 = &lpuart1; + serial2 = &lpuart2; + serial3 = &lpuart3; }; chosen { - stdout-path = &adma_lpuart2; + stdout-path = &lpuart2; }; memory@80000000 { @@ -82,7 +82,7 @@ }; /* BT */ -&adma_lpuart0 { +&lpuart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart0>; uart-has-rtscts; @@ -90,21 +90,21 @@ }; /* LS-UART0 */ -&adma_lpuart1 { +&lpuart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart1>; status = "okay"; }; /* Debug */ -&adma_lpuart2 { +&lpuart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart2>; status = "okay"; }; /* PCI-E UART */ -&adma_lpuart3 { +&lpuart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart3>; status = "okay"; @@ -133,7 +133,7 @@ &usdhc1 { #address-cells = <1>; #size-cells = <0>; - assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>; + assigned-clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -151,7 +151,7 @@ /* SD */ &usdhc2 { - assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>; + assigned-clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi index c7336f387605..144fc9e82da7 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi @@ -26,7 +26,7 @@ }; }; -&adma_i2c1 { +&i2c1 { status = "okay"; /* M41T0M6 real time clock on carrier board */ @@ -37,17 +37,17 @@ }; /* Colibri UART_B */ -&adma_lpuart0 { +&lpuart0 { status= "okay"; }; /* Colibri UART_C */ -&adma_lpuart2 { +&lpuart2 { status= "okay"; }; /* Colibri UART_A */ -&adma_lpuart3 { +&lpuart3 { status= "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi index f38acff0d25c..89d70e030433 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi @@ -10,7 +10,7 @@ compatible = "toradex,colibri-imx8x", "fsl,imx8qxp"; chosen { - stdout-path = &adma_lpuart3; + stdout-path = &lpuart3; }; reg_module_3v3: regulator-module-3v3 { @@ -22,7 +22,7 @@ }; /* On-module I2C */ -&adma_i2c0 { +&i2c0 { #address-cells = <1>; #size-cells = <0>; clock-frequency = <100000>; @@ -49,7 +49,7 @@ }; /* Colibri I2C */ -&adma_i2c1 { +&i2c1 { #address-cells = <1>; #size-cells = <0>; clock-frequency = <100000>; @@ -58,19 +58,19 @@ }; /* Colibri UART_B */ -&adma_lpuart0 { +&lpuart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart0>; }; /* Colibri UART_C */ -&adma_lpuart2 { +&lpuart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart2>; }; /* Colibri UART_A */ -&adma_lpuart3 { +&lpuart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart3>, <&pinctrl_lpuart3_ctrl>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index 46437d3c7a04..863232a47004 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -12,7 +12,7 @@ compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp"; chosen { - stdout-path = &adma_lpuart0; + stdout-path = &lpuart0; }; memory@80000000 { @@ -30,11 +30,30 @@ }; }; -&adma_dsp { +&dsp { status = "okay"; }; -&adma_i2c1 { +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; +}; + +&i2c1 { #address-cells = <1>; #size-cells = <0>; clock-frequency = <100000>; @@ -110,31 +129,12 @@ }; }; -&adma_lpuart0 { +&lpuart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart0>; status = "okay"; }; -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec1>; - phy-mode = "rgmii-id"; - phy-handle = <ðphy0>; - fsl,magic-packet; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy0: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - }; - }; -}; - &scu_key { status = "okay"; }; @@ -173,7 +173,7 @@ }; &usdhc1 { - assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>; + assigned-clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -185,7 +185,7 @@ }; &usdhc2 { - assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>; + assigned-clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi new file mode 100644 index 000000000000..dc1daa8dc72f --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2020 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +&lpuart0 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; +}; + +&lpuart1 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; +}; + +&lpuart2 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; +}; + +&lpuart3 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; +}; + +&i2c0 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; +}; + +&i2c1 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; +}; + +&i2c2 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; +}; + +&i2c3 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi new file mode 100644 index 000000000000..f5f58959f65c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2020 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +&usdhc1 { + compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; +}; + +&usdhc2 { + compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; +}; + +&usdhc3 { + compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; +}; + +&fec1 { + compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec"; +}; + +&fec2 { + compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi new file mode 100644 index 000000000000..11395479ffc0 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2020 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +&lsio_gpio0 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio1 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio2 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio3 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio4 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio5 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio6 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio7 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; +}; + +&lsio_mu0 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu1 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu2 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu3 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu4 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu13 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index e46faac1fe71..1e6b4995091e 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -1,11 +1,12 @@ // SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2016 Freescale Semiconductor, Inc. - * Copyright 2017-2018 NXP + * Copyright 2017-2020 NXP * Dong Aisheng <aisheng.dong@nxp.com> */ #include <dt-bindings/clock/imx8-clock.h> +#include <dt-bindings/clock/imx8-lpcg.h> #include <dt-bindings/firmware/imx/rsrc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -29,10 +30,10 @@ gpio5 = &lsio_gpio5; gpio6 = &lsio_gpio6; gpio7 = &lsio_gpio7; - i2c0 = &adma_i2c0; - i2c1 = &adma_i2c1; - i2c2 = &adma_i2c2; - i2c3 = &adma_i2c3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; mmc0 = &usdhc1; mmc1 = &usdhc2; mmc2 = &usdhc3; @@ -41,10 +42,10 @@ mu2 = &lsio_mu2; mu3 = &lsio_mu3; mu4 = &lsio_mu4; - serial0 = &adma_lpuart0; - serial1 = &adma_lpuart1; - serial2 = &adma_lpuart2; - serial3 = &adma_lpuart3; + serial0 = &lpuart0; + serial1 = &lpuart1; + serial2 = &lpuart2; + serial3 = &lpuart3; }; cpus { @@ -58,7 +59,7 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&A35_L2>; - clocks = <&clk IMX_A35_CLK>; + clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>; operating-points-v2 = <&a35_opp_table>; #cooling-cells = <2>; }; @@ -69,7 +70,7 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&A35_L2>; - clocks = <&clk IMX_A35_CLK>; + clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>; operating-points-v2 = <&a35_opp_table>; #cooling-cells = <2>; }; @@ -80,7 +81,7 @@ reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&A35_L2>; - clocks = <&clk IMX_A35_CLK>; + clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>; operating-points-v2 = <&a35_opp_table>; #cooling-cells = <2>; }; @@ -91,7 +92,7 @@ reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&A35_L2>; - clocks = <&clk IMX_A35_CLK>; + clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>; operating-points-v2 = <&a35_opp_table>; #cooling-cells = <2>; }; @@ -158,9 +159,14 @@ &lsio_mu1 1 0 &lsio_mu1 3 3>; + pd: imx8qx-pd { + compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd"; + #power-domain-cells = <1>; + }; + clk: clock-controller { compatible = "fsl,imx8qxp-clk"; - #clock-cells = <1>; + #clock-cells = <2>; clocks = <&xtal32k &xtal24m>; clock-names = "xtal_32KHz", "xtal_24Mhz"; }; @@ -175,11 +181,6 @@ #size-cells = <1>; }; - pd: imx8qx-pd { - compatible = "fsl,imx8qxp-scu-pd"; - #power-domain-cells = <1>; - }; - scu_key: scu-key { compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; linux,keycodes = <KEY_POWER>; @@ -223,380 +224,6 @@ clock-output-names = "xtal_24MHz"; }; - adma_subsys: bus@59000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x59000000 0x0 0x59000000 0x2000000>; - - adma_lpcg: clock-controller@59000000 { - compatible = "fsl,imx8qxp-lpcg-adma"; - reg = <0x59000000 0x2000000>; - #clock-cells = <1>; - }; - - adma_dsp: dsp@596e8000 { - compatible = "fsl,imx8qxp-dsp"; - reg = <0x596e8000 0x88000>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_DSP_IPG_CLK>, - <&adma_lpcg IMX_ADMA_LPCG_OCRAM_IPG_CLK>, - <&adma_lpcg IMX_ADMA_LPCG_DSP_CORE_CLK>; - clock-names = "ipg", "ocram", "core"; - power-domains = <&pd IMX_SC_R_MU_13A>, - <&pd IMX_SC_R_MU_13B>, - <&pd IMX_SC_R_DSP>, - <&pd IMX_SC_R_DSP_RAM>; - mbox-names = "txdb0", "txdb1", - "rxdb0", "rxdb1"; - mboxes = <&lsio_mu13 2 0>, - <&lsio_mu13 2 1>, - <&lsio_mu13 3 0>, - <&lsio_mu13 3 1>; - memory-region = <&dsp_reserved>; - status = "disabled"; - }; - - adma_lpuart0: serial@5a060000 { - compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; - reg = <0x5a060000 0x1000>; - interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_IPG_CLK>, - <&adma_lpcg IMX_ADMA_LPCG_UART0_BAUD_CLK>; - clock-names = "ipg", "baud"; - power-domains = <&pd IMX_SC_R_UART_0>; - status = "disabled"; - }; - - adma_lpuart1: serial@5a070000 { - compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; - reg = <0x5a070000 0x1000>; - interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_IPG_CLK>, - <&adma_lpcg IMX_ADMA_LPCG_UART1_BAUD_CLK>; - clock-names = "ipg", "baud"; - power-domains = <&pd IMX_SC_R_UART_1>; - status = "disabled"; - }; - - adma_lpuart2: serial@5a080000 { - compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; - reg = <0x5a080000 0x1000>; - interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_IPG_CLK>, - <&adma_lpcg IMX_ADMA_LPCG_UART2_BAUD_CLK>; - clock-names = "ipg", "baud"; - power-domains = <&pd IMX_SC_R_UART_2>; - status = "disabled"; - }; - - adma_lpuart3: serial@5a090000 { - compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; - reg = <0x5a090000 0x1000>; - interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_IPG_CLK>, - <&adma_lpcg IMX_ADMA_LPCG_UART3_BAUD_CLK>; - clock-names = "ipg", "baud"; - power-domains = <&pd IMX_SC_R_UART_3>; - status = "disabled"; - }; - - adma_i2c0: i2c@5a800000 { - compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; - reg = <0x5a800000 0x4000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C0_CLK>; - clock-names = "per"; - assigned-clocks = <&clk IMX_ADMA_I2C0_CLK>; - assigned-clock-rates = <24000000>; - power-domains = <&pd IMX_SC_R_I2C_0>; - status = "disabled"; - }; - - adma_i2c1: i2c@5a810000 { - compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; - reg = <0x5a810000 0x4000>; - interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C1_CLK>; - clock-names = "per"; - assigned-clocks = <&clk IMX_ADMA_I2C1_CLK>; - assigned-clock-rates = <24000000>; - power-domains = <&pd IMX_SC_R_I2C_1>; - status = "disabled"; - }; - - adma_i2c2: i2c@5a820000 { - compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; - reg = <0x5a820000 0x4000>; - interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C2_CLK>; - clock-names = "per"; - assigned-clocks = <&clk IMX_ADMA_I2C2_CLK>; - assigned-clock-rates = <24000000>; - power-domains = <&pd IMX_SC_R_I2C_2>; - status = "disabled"; - }; - - adma_i2c3: i2c@5a830000 { - compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; - reg = <0x5a830000 0x4000>; - interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C3_CLK>; - clock-names = "per"; - assigned-clocks = <&clk IMX_ADMA_I2C3_CLK>; - assigned-clock-rates = <24000000>; - power-domains = <&pd IMX_SC_R_I2C_3>; - status = "disabled"; - }; - }; - - conn_subsys: bus@5b000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x5b000000 0x0 0x5b000000 0x1000000>; - - conn_lpcg: clock-controller@5b200000 { - compatible = "fsl,imx8qxp-lpcg-conn"; - reg = <0x5b200000 0xb0000>; - #clock-cells = <1>; - }; - - usdhc1: mmc@5b010000 { - compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; - interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x5b010000 0x10000>; - clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>, - <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>, - <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>; - clock-names = "ipg", "per", "ahb"; - power-domains = <&pd IMX_SC_R_SDHC_0>; - status = "disabled"; - }; - - usdhc2: mmc@5b020000 { - compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; - interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x5b020000 0x10000>; - clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC1_IPG_CLK>, - <&conn_lpcg IMX_CONN_LPCG_SDHC1_PER_CLK>, - <&conn_lpcg IMX_CONN_LPCG_SDHC1_HCLK>; - clock-names = "ipg", "per", "ahb"; - power-domains = <&pd IMX_SC_R_SDHC_1>; - fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; - status = "disabled"; - }; - - usdhc3: mmc@5b030000 { - compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; - interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x5b030000 0x10000>; - clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC2_IPG_CLK>, - <&conn_lpcg IMX_CONN_LPCG_SDHC2_PER_CLK>, - <&conn_lpcg IMX_CONN_LPCG_SDHC2_HCLK>; - clock-names = "ipg", "per", "ahb"; - power-domains = <&pd IMX_SC_R_SDHC_2>; - status = "disabled"; - }; - - fec1: ethernet@5b040000 { - compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec"; - reg = <0x5b040000 0x10000>; - interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&conn_lpcg IMX_CONN_LPCG_ENET0_IPG_CLK>, - <&conn_lpcg IMX_CONN_LPCG_ENET0_AHB_CLK>, - <&conn_lpcg IMX_CONN_LPCG_ENET0_TX_CLK>, - <&conn_lpcg IMX_CONN_LPCG_ENET0_ROOT_CLK>; - clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; - power-domains = <&pd IMX_SC_R_ENET_0>; - status = "disabled"; - }; - - fec2: ethernet@5b050000 { - compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec"; - reg = <0x5b050000 0x10000>; - interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&conn_lpcg IMX_CONN_LPCG_ENET1_IPG_CLK>, - <&conn_lpcg IMX_CONN_LPCG_ENET1_AHB_CLK>, - <&conn_lpcg IMX_CONN_LPCG_ENET1_TX_CLK>, - <&conn_lpcg IMX_CONN_LPCG_ENET1_ROOT_CLK>; - clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; - power-domains = <&pd IMX_SC_R_ENET_1>; - status = "disabled"; - }; - }; - - ddr_subsyss: bus@5c000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x5c000000 0x0 0x5c000000 0x1000000>; - - ddr-pmu@5c020000 { - compatible = "fsl,imx8-ddr-pmu"; - reg = <0x5c020000 0x10000>; - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - lsio_subsys: bus@5d000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x5d000000 0x0 0x5d000000 0x1000000>; - - lsio_gpio0: gpio@5d080000 { - compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; - reg = <0x5d080000 0x10000>; - interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - power-domains = <&pd IMX_SC_R_GPIO_0>; - }; - - lsio_gpio1: gpio@5d090000 { - compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; - reg = <0x5d090000 0x10000>; - interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - power-domains = <&pd IMX_SC_R_GPIO_1>; - }; - - lsio_gpio2: gpio@5d0a0000 { - compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; - reg = <0x5d0a0000 0x10000>; - interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - power-domains = <&pd IMX_SC_R_GPIO_2>; - }; - - lsio_gpio3: gpio@5d0b0000 { - compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; - reg = <0x5d0b0000 0x10000>; - interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - power-domains = <&pd IMX_SC_R_GPIO_3>; - }; - - lsio_gpio4: gpio@5d0c0000 { - compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; - reg = <0x5d0c0000 0x10000>; - interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - power-domains = <&pd IMX_SC_R_GPIO_4>; - }; - - lsio_gpio5: gpio@5d0d0000 { - compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; - reg = <0x5d0d0000 0x10000>; - interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - power-domains = <&pd IMX_SC_R_GPIO_5>; - }; - - lsio_gpio6: gpio@5d0e0000 { - compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; - reg = <0x5d0e0000 0x10000>; - interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - power-domains = <&pd IMX_SC_R_GPIO_6>; - }; - - lsio_gpio7: gpio@5d0f0000 { - compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; - reg = <0x5d0f0000 0x10000>; - interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - power-domains = <&pd IMX_SC_R_GPIO_7>; - }; - - lsio_mu0: mailbox@5d1b0000 { - compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1b0000 0x10000>; - interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - status = "disabled"; - }; - - lsio_mu1: mailbox@5d1c0000 { - compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1c0000 0x10000>; - interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - }; - - lsio_mu2: mailbox@5d1d0000 { - compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1d0000 0x10000>; - interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - status = "disabled"; - }; - - lsio_mu3: mailbox@5d1e0000 { - compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1e0000 0x10000>; - interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - status = "disabled"; - }; - - lsio_mu4: mailbox@5d1f0000 { - compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1f0000 0x10000>; - interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - status = "disabled"; - }; - - lsio_mu13: mailbox@5d280000 { - compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d280000 0x10000>; - interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - power-domains = <&pd IMX_SC_R_MU_13A>; - }; - - lsio_lpcg: clock-controller@5d400000 { - compatible = "fsl,imx8qxp-lpcg-lsio"; - reg = <0x5d400000 0x400000>; - #clock-cells = <1>; - }; - }; - thermal_zones: thermal-zones { cpu-thermal0 { polling-delay-passive = <250>; @@ -629,4 +256,14 @@ }; }; }; + + /* sorted in register address */ + #include "imx8-ss-adma.dtsi" + #include "imx8-ss-conn.dtsi" + #include "imx8-ss-ddr.dtsi" + #include "imx8-ss-lsio.dtsi" }; + +#include "imx8qxp-ss-adma.dtsi" +#include "imx8qxp-ss-conn.dtsi" +#include "imx8qxp-ss-lsio.dtsi" |