diff options
Diffstat (limited to 'arch/arm64/boot/dts/exynos/exynos5433-tm2.dts')
| -rw-r--r-- | arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1087 |
1 files changed, 58 insertions, 1029 deletions
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index f21bdc2ff834..dea0a6f5bc18 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -11,1039 +11,68 @@ * published by the Free Software Foundation. */ -/dts-v1/; -#include "exynos5433.dtsi" -#include <dt-bindings/clock/samsung,s2mps11.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> +#include "exynos5433-tm2-common.dtsi" / { model = "Samsung TM2 board"; compatible = "samsung,tm2", "samsung,exynos5433"; - - aliases { - gsc0 = &gsc_0; - gsc1 = &gsc_1; - gsc2 = &gsc_2; - pinctrl0 = &pinctrl_alive; - pinctrl1 = &pinctrl_aud; - pinctrl2 = &pinctrl_cpif; - pinctrl3 = &pinctrl_ese; - pinctrl4 = &pinctrl_finger; - pinctrl5 = &pinctrl_fsys; - pinctrl6 = &pinctrl_imem; - pinctrl7 = &pinctrl_nfc; - pinctrl8 = &pinctrl_peric; - pinctrl9 = &pinctrl_touch; - serial0 = &serial_0; - serial1 = &serial_1; - serial2 = &serial_2; - serial3 = &serial_3; - spi0 = &spi_0; - spi1 = &spi_1; - spi2 = &spi_2; - spi3 = &spi_3; - spi4 = &spi_4; - mshc0 = &mshc_0; - mshc2 = &mshc_2; - }; - - chosen { - stdout-path = &serial_1; - }; - - memory@20000000 { - device_type = "memory"; - reg = <0x0 0x20000000 0x0 0xc0000000>; - }; - - gpio-keys { - compatible = "gpio-keys"; - - power-key { - gpios = <&gpa2 7 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - label = "power key"; - debounce-interval = <10>; - }; - - volume-up-key { - gpios = <&gpa2 0 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEUP>; - label = "volume-up key"; - debounce-interval = <10>; - }; - - volume-down-key { - gpios = <&gpa2 1 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEDOWN>; - label = "volume-down key"; - debounce-interval = <10>; - }; - - homepage-key { - gpios = <&gpa0 3 GPIO_ACTIVE_LOW>; - linux,code = <KEY_MENU>; - label = "homepage key"; - debounce-interval = <10>; - }; - }; - - i2c_max98504: i2c-gpio-0 { - compatible = "i2c-gpio"; - gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */ - &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - max98504: max98504@31 { - compatible = "maxim,max98504"; - reg = <0x31>; - maxim,rx-path = <1>; - maxim,tx-path = <1>; - maxim,tx-channel-mask = <3>; - maxim,tx-channel-source = <2>; - }; - }; - - sound { - compatible = "samsung,tm2-audio"; - audio-codec = <&wm5110>; - i2s-controller = <&i2s0>; - audio-amplifier = <&max98504>; - mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>; - model = "wm5110"; - samsung,audio-routing = - /* Headphone */ - "HP", "HPOUT1L", - "HP", "HPOUT1R", - - /* Speaker */ - "SPK", "SPKOUT", - "SPKOUT", "HPOUT2L", - "SPKOUT", "HPOUT2R", - - /* Receiver */ - "RCV", "HPOUT3L", - "RCV", "HPOUT3R"; - status = "okay"; - }; -}; - -&adc { - vdd-supply = <&ldo3_reg>; - status = "okay"; - - thermistor-ap { - compatible = "murata,ncp03wf104"; - pullup-uv = <1800000>; - pullup-ohm = <100000>; - pulldown-ohm = <0>; - io-channels = <&adc 0>; - }; - - thermistor-battery { - compatible = "murata,ncp03wf104"; - pullup-uv = <1800000>; - pullup-ohm = <100000>; - pulldown-ohm = <0>; - io-channels = <&adc 1>; - #thermal-sensor-cells = <0>; - }; - - thermistor-charger { - compatible = "murata,ncp03wf104"; - pullup-uv = <1800000>; - pullup-ohm = <100000>; - pulldown-ohm = <0>; - io-channels = <&adc 2>; - }; -}; - -&cmu_aud { - assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>; - assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>; -}; - -&cmu_fsys { - assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>, - <&cmu_top CLK_MOUT_SCLK_USBHOST30>, - <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>, - <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>, - <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>, - <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>, - <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>, - <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>, - <&cmu_top CLK_DIV_SCLK_USBDRD30>, - <&cmu_top CLK_DIV_SCLK_USBHOST30>; - assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>, - <&cmu_top CLK_MOUT_BUS_PLL_USER>, - <&cmu_top CLK_SCLK_USBDRD30_FSYS>, - <&cmu_top CLK_SCLK_USBHOST30_FSYS>, - <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>, - <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>, - <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>, - <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>; - assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>, - <66700000>, <66700000>; -}; - -&cmu_gscl { - assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>, - <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>; - assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>, - <&cmu_top CLK_ACLK_GSCL_333>; -}; - -&cmu_mfc { - assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>; - assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>; -}; - -&cmu_mscl { - assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>, - <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, - <&cmu_mscl CLK_MOUT_SCLK_JPEG>, - <&cmu_top CLK_MOUT_SCLK_JPEG_A>; - assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>, - <&cmu_top CLK_SCLK_JPEG_MSCL>, - <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, - <&cmu_top CLK_MOUT_BUS_PLL_USER>; -}; - -&cpu0 { - cpu-supply = <&buck3_reg>; -}; - -&cpu4 { - cpu-supply = <&buck2_reg>; -}; - -&decon { - status = "okay"; - - i80-if-timings { - }; -}; - -&dsi { - status = "okay"; - vddcore-supply = <&ldo6_reg>; - vddio-supply = <&ldo7_reg>; - samsung,pll-clock-frequency = <24000000>; - pinctrl-names = "default"; - pinctrl-0 = <&te_irq>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - dsi_out: endpoint { - samsung,burst-clock-frequency = <512000000>; - samsung,esc-clock-frequency = <16000000>; - }; - }; - }; -}; - -&hsi2c_0 { - status = "okay"; - clock-frequency = <2500000>; - - s2mps13-pmic@66 { - compatible = "samsung,s2mps13-pmic"; - interrupt-parent = <&gpa0>; - interrupts = <7 IRQ_TYPE_NONE>; - reg = <0x66>; - samsung,s2mps11-wrstbi-ground; - - s2mps13_osc: clocks { - compatible = "samsung,s2mps13-clk"; - #clock-cells = <1>; - clock-output-names = "s2mps13_ap", "s2mps13_cp", - "s2mps13_bt"; - }; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ALIVE_0.9V_AP"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-always-on; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDDQ_MMC2_2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo3_reg: LDO3 { - regulator-name = "VDD1_E_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo4_reg: LDO4 { - regulator-name = "VDD10_MIF_PLL_1.0V_AP"; - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo5_reg: LDO5 { - regulator-name = "VDD10_DPLL_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo6_reg: LDO6 { - regulator-name = "VDD10_MIPI2L_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo7_reg: LDO7 { - regulator-name = "VDD18_MIPI2L_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo8_reg: LDO8 { - regulator-name = "VDD18_LLI_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo9_reg: LDO9 { - regulator-name = "VDD18_ABB_ETC_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo10_reg: LDO10 { - regulator-name = "VDD33_USB30_3.0V_AP"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo11_reg: LDO11 { - regulator-name = "VDD_INT_M_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo12_reg: LDO12 { - regulator-name = "VDD_KFC_M_1.1V_AP"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - }; - - ldo13_reg: LDO13 { - regulator-name = "VDD_G3D_M_0.95V_AP"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <950000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo14_reg: LDO14 { - regulator-name = "VDDQ_M1_LDO_1.2V_AP"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo15_reg: LDO15 { - regulator-name = "VDDQ_M2_LDO_1.2V_AP"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo16_reg: LDO16 { - regulator-name = "VDDQ_EFUSE"; - regulator-min-microvolt = <1400000>; - regulator-max-microvolt = <3400000>; - regulator-always-on; - }; - - ldo17_reg: LDO17 { - regulator-name = "V_TFLASH_2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo18_reg: LDO18 { - regulator-name = "V_CODEC_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo19_reg: LDO19 { - regulator-name = "VDDA_1.8V_COMP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo20_reg: LDO20 { - regulator-name = "VCC_2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo21_reg: LDO21 { - regulator-name = "VT_CAM_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo22_reg: LDO22 { - regulator-name = "CAM_IO_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo23_reg: LDO23 { - regulator-name = "CAM_SEN_CORE_1.2V_AP"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1200000>; - }; - - ldo24_reg: LDO24 { - regulator-name = "VT_CAM_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo25_reg: LDO25 { - regulator-name = "CAM_SEN_A2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo26_reg: LDO26 { - regulator-name = "CAM_AF_2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo27_reg: LDO27 { - regulator-name = "VCC_3.0V_LCD_AP"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo28_reg: LDO28 { - regulator-name = "VCC_1.8V_LCD_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo29_reg: LDO29 { - regulator-name = "VT_CAM_2.8V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo30_reg: LDO30 { - regulator-name = "TSP_AVDD_3.3V_AP"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo31_reg: LDO31 { - regulator-name = "TSP_VDD_1.85V_AP"; - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <1850000>; - }; - - ldo32_reg: LDO32 { - regulator-name = "VTOUCH_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo33_reg: LDO33 { - regulator-name = "VTOUCH_LED_3.3V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3300000>; - regulator-ramp-delay = <12500>; - }; - - ldo34_reg: LDO34 { - regulator-name = "VCC_1.8V_MHL_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <2100000>; - }; - - ldo35_reg: LDO35 { - regulator-name = "OIS_VM_2.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo36_reg: LDO36 { - regulator-name = "VSIL_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - ldo37_reg: LDO37 { - regulator-name = "VF_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo38_reg: LDO38 { - regulator-name = "VCC_3.0V_MOTOR_AP"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo39_reg: LDO39 { - regulator-name = "V_HRM_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo40_reg: LDO40 { - regulator-name = "V_HRM_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - buck1_reg: BUCK1 { - regulator-name = "VDD_MIF_0.9V_AP"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck2_reg: BUCK2 { - regulator-name = "VDD_EGL_1.0V_AP"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck3_reg: BUCK3 { - regulator-name = "VDD_KFC_1.0V_AP"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck4_reg: BUCK4 { - regulator-name = "VDD_INT_0.95V_AP"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck5_reg: BUCK5 { - regulator-name = "VDD_DISP_CAM0_0.9V_AP"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck6_reg: BUCK6 { - regulator-name = "VDD_G3D_0.9V_AP"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck7_reg: BUCK7 { - regulator-name = "VDD_MEM1_1.2V_AP"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - buck8_reg: BUCK8 { - regulator-name = "VDD_LLDO_1.35V_AP"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - buck9_reg: BUCK9 { - regulator-name = "VDD_MLDO_2.0V_AP"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - buck10_reg: BUCK10 { - regulator-name = "vdd_mem2"; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - }; - }; - }; -}; - -&hsi2c_8 { - status = "okay"; - - max77843@66 { - compatible = "maxim,max77843"; - interrupt-parent = <&gpa1>; - interrupts = <5 IRQ_TYPE_EDGE_FALLING>; - reg = <0x66>; - - muic: max77843-muic { - compatible = "maxim,max77843-muic"; - }; - - regulators { - compatible = "maxim,max77843-regulator"; - safeout1_reg: SAFEOUT1 { - regulator-name = "SAFEOUT1"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <4950000>; - }; - - safeout2_reg: SAFEOUT2 { - regulator-name = "SAFEOUT2"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <4950000>; - }; - - charger_reg: CHARGER { - regulator-name = "CHARGER"; - regulator-min-microamp = <100000>; - regulator-max-microamp = <3150000>; - }; - }; - - haptic: max77843-haptic { - compatible = "maxim,max77843-haptic"; - haptic-supply = <&ldo38_reg>; - pwms = <&pwm 0 33670 0>; - pwm-names = "haptic"; - }; - }; -}; - -&i2s0 { - status = "okay"; -}; - -&mshc_0 { - status = "okay"; - num-slots = <1>; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - cap-mmc-highspeed; - non-removable; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <0 2>; - samsung,dw-mshc-hs400-timing = <0 3>; - samsung,read-strobe-delay = <90>; - fifo-depth = <0x80>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 - &sd0_bus8 &sd0_rdqs>; - bus-width = <8>; - assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>; - assigned-clock-rates = <800000000>; -}; - -&mshc_2 { - status = "okay"; - num-slots = <1>; - cap-sd-highspeed; - disable-wp; - cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>; - cd-inverted; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <0 2>; - fifo-depth = <0x80>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>; - bus-width = <4>; -}; - -&pinctrl_alive { - pinctrl-names = "default"; - pinctrl-0 = <&initial_alive>; - - initial_alive: initial-state { - PIN(IN, gpa0-0, DOWN, LV1); - PIN(IN, gpa0-1, NONE, LV1); - PIN(IN, gpa0-2, DOWN, LV1); - PIN(IN, gpa0-3, NONE, LV1); - PIN(IN, gpa0-4, NONE, LV1); - PIN(IN, gpa0-5, DOWN, LV1); - PIN(IN, gpa0-6, NONE, LV1); - PIN(IN, gpa0-7, NONE, LV1); - - PIN(IN, gpa1-0, UP, LV1); - PIN(IN, gpa1-1, NONE, LV1); - PIN(IN, gpa1-2, NONE, LV1); - PIN(IN, gpa1-3, DOWN, LV1); - PIN(IN, gpa1-4, DOWN, LV1); - PIN(IN, gpa1-5, NONE, LV1); - PIN(IN, gpa1-6, NONE, LV1); - PIN(IN, gpa1-7, NONE, LV1); - - PIN(IN, gpa2-0, NONE, LV1); - PIN(IN, gpa2-1, NONE, LV1); - PIN(IN, gpa2-2, NONE, LV1); - PIN(IN, gpa2-3, DOWN, LV1); - PIN(IN, gpa2-4, NONE, LV1); - PIN(IN, gpa2-5, DOWN, LV1); - PIN(IN, gpa2-6, DOWN, LV1); - PIN(IN, gpa2-7, NONE, LV1); - - PIN(IN, gpa3-0, DOWN, LV1); - PIN(IN, gpa3-1, DOWN, LV1); - PIN(IN, gpa3-2, NONE, LV1); - PIN(IN, gpa3-3, DOWN, LV1); - PIN(IN, gpa3-4, NONE, LV1); - PIN(IN, gpa3-5, DOWN, LV1); - PIN(IN, gpa3-6, DOWN, LV1); - PIN(IN, gpa3-7, DOWN, LV1); - - PIN(IN, gpf1-0, NONE, LV1); - PIN(IN, gpf1-1, NONE, LV1); - PIN(IN, gpf1-2, DOWN, LV1); - PIN(IN, gpf1-4, UP, LV1); - PIN(OUT, gpf1-5, NONE, LV1); - PIN(IN, gpf1-6, DOWN, LV1); - PIN(IN, gpf1-7, DOWN, LV1); - - PIN(IN, gpf2-0, DOWN, LV1); - PIN(IN, gpf2-1, DOWN, LV1); - PIN(IN, gpf2-2, DOWN, LV1); - PIN(IN, gpf2-3, DOWN, LV1); - - PIN(IN, gpf3-0, DOWN, LV1); - PIN(IN, gpf3-1, DOWN, LV1); - PIN(IN, gpf3-2, NONE, LV1); - PIN(IN, gpf3-3, DOWN, LV1); - - PIN(IN, gpf4-0, DOWN, LV1); - PIN(IN, gpf4-1, DOWN, LV1); - PIN(IN, gpf4-2, DOWN, LV1); - PIN(IN, gpf4-3, DOWN, LV1); - PIN(IN, gpf4-4, DOWN, LV1); - PIN(IN, gpf4-5, DOWN, LV1); - PIN(IN, gpf4-6, DOWN, LV1); - PIN(IN, gpf4-7, DOWN, LV1); - - PIN(IN, gpf5-0, DOWN, LV1); - PIN(IN, gpf5-1, DOWN, LV1); - PIN(IN, gpf5-2, DOWN, LV1); - PIN(IN, gpf5-3, DOWN, LV1); - PIN(OUT, gpf5-4, NONE, LV1); - PIN(IN, gpf5-5, DOWN, LV1); - PIN(IN, gpf5-6, DOWN, LV1); - PIN(IN, gpf5-7, DOWN, LV1); - }; - - te_irq: te_irq { - samsung,pins = "gpf1-3"; - samsung,pin-function = <0xf>; - }; -}; - -&pinctrl_cpif { - pinctrl-names = "default"; - pinctrl-0 = <&initial_cpif>; - - initial_cpif: initial-state { - PIN(IN, gpv6-0, DOWN, LV1); - PIN(IN, gpv6-1, DOWN, LV1); - }; -}; - -&pinctrl_ese { - pinctrl-names = "default"; - pinctrl-0 = <&initial_ese>; - - initial_ese: initial-state { - PIN(IN, gpj2-0, DOWN, LV1); - PIN(IN, gpj2-1, DOWN, LV1); - PIN(IN, gpj2-2, DOWN, LV1); - }; -}; - -&pinctrl_fsys { - pinctrl-names = "default"; - pinctrl-0 = <&initial_fsys>; - - initial_fsys: initial-state { - PIN(IN, gpr3-0, NONE, LV1); - PIN(IN, gpr3-1, DOWN, LV1); - PIN(IN, gpr3-2, DOWN, LV1); - PIN(IN, gpr3-3, DOWN, LV1); - PIN(IN, gpr3-7, NONE, LV1); - }; -}; - -&pinctrl_imem { - pinctrl-names = "default"; - pinctrl-0 = <&initial_imem>; - - initial_imem: initial-state { - PIN(IN, gpf0-0, UP, LV1); - PIN(IN, gpf0-1, UP, LV1); - PIN(IN, gpf0-2, DOWN, LV1); - PIN(IN, gpf0-3, UP, LV1); - PIN(IN, gpf0-4, DOWN, LV1); - PIN(IN, gpf0-5, NONE, LV1); - PIN(IN, gpf0-6, DOWN, LV1); - PIN(IN, gpf0-7, UP, LV1); - }; -}; - -&pinctrl_nfc { - pinctrl-names = "default"; - pinctrl-0 = <&initial_nfc>; - - initial_nfc: initial-state { - PIN(IN, gpj0-2, DOWN, LV1); - }; -}; - -&pinctrl_peric { - pinctrl-names = "default"; - pinctrl-0 = <&initial_peric>; - - initial_peric: initial-state { - PIN(IN, gpv7-0, DOWN, LV1); - PIN(IN, gpv7-1, DOWN, LV1); - PIN(IN, gpv7-2, NONE, LV1); - PIN(IN, gpv7-3, DOWN, LV1); - PIN(IN, gpv7-4, DOWN, LV1); - PIN(IN, gpv7-5, DOWN, LV1); - - PIN(IN, gpb0-4, DOWN, LV1); - - PIN(IN, gpc0-2, DOWN, LV1); - PIN(IN, gpc0-5, DOWN, LV1); - PIN(IN, gpc0-7, DOWN, LV1); - - PIN(IN, gpc1-1, DOWN, LV1); - - PIN(IN, gpc3-4, NONE, LV1); - PIN(IN, gpc3-5, NONE, LV1); - PIN(IN, gpc3-6, NONE, LV1); - PIN(IN, gpc3-7, NONE, LV1); - - PIN(OUT, gpg0-0, NONE, LV1); - PIN(FUNC1, gpg0-1, DOWN, LV1); - - PIN(IN, gpd2-5, DOWN, LV1); - - PIN(IN, gpd4-0, NONE, LV1); - PIN(IN, gpd4-1, DOWN, LV1); - PIN(IN, gpd4-2, DOWN, LV1); - PIN(IN, gpd4-3, DOWN, LV1); - PIN(IN, gpd4-4, DOWN, LV1); - - PIN(IN, gpd6-3, DOWN, LV1); - - PIN(IN, gpd8-1, UP, LV1); - - PIN(IN, gpg1-0, DOWN, LV1); - PIN(IN, gpg1-1, DOWN, LV1); - PIN(IN, gpg1-2, DOWN, LV1); - PIN(IN, gpg1-3, DOWN, LV1); - PIN(IN, gpg1-4, DOWN, LV1); - - PIN(IN, gpg2-0, DOWN, LV1); - PIN(IN, gpg2-1, DOWN, LV1); - - PIN(IN, gpg3-0, DOWN, LV1); - PIN(IN, gpg3-1, DOWN, LV1); - PIN(IN, gpg3-5, DOWN, LV1); - PIN(IN, gpg3-7, DOWN, LV1); - }; -}; - -&pinctrl_touch { - pinctrl-names = "default"; - pinctrl-0 = <&initial_touch>; - - initial_touch: initial-state { - PIN(IN, gpj1-2, DOWN, LV1); - }; -}; - -&pwm { - pinctrl-0 = <&pwm0_out>; - pinctrl-names = "default"; - status = "okay"; -}; - -&mic { - status = "okay"; - - i80-if-timings { - }; -}; - -&pmu_system_controller { - assigned-clocks = <&pmu_system_controller 0>; - assigned-clock-parents = <&xxti>; -}; - -&serial_1 { - status = "okay"; -}; - -&spi_1 { - cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; - status = "okay"; - - wm5110: wm5110-codec@0 { - compatible = "wlf,wm5110"; - reg = <0x0>; - spi-max-frequency = <20000000>; - interrupt-parent = <&gpa0>; - interrupts = <4 IRQ_TYPE_NONE>; - clocks = <&pmu_system_controller 0>, - <&s2mps13_osc S2MPS11_CLK_BT>; - clock-names = "mclk1", "mclk2"; - - gpio-controller; - #gpio-cells = <2>; - - wlf,micd-detect-debounce = <300>; - wlf,micd-bias-start-time = <0x1>; - wlf,micd-rate = <0x7>; - wlf,micd-dbtime = <0x1>; - wlf,micd-force-micbias; - wlf,micd-configs = <0x0 1 0>; - wlf,hpdet-channel = <1>; - wlf,gpsw = <0x1>; - wlf,inmode = <2 0 2 0>; - - wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>; - wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>; - - /* core supplies */ - AVDD-supply = <&ldo18_reg>; - DBVDD1-supply = <&ldo18_reg>; - CPVDD-supply = <&ldo18_reg>; - DBVDD2-supply = <&ldo18_reg>; - DBVDD3-supply = <&ldo18_reg>; - - controller-data { - samsung,spi-feedback-delay = <0>; - }; - }; -}; - -&timer { - clock-frequency = <24000000>; -}; - -&tmu_atlas0 { - vtmu-supply = <&ldo3_reg>; - status = "okay"; -}; - -&tmu_apollo { - vtmu-supply = <&ldo3_reg>; - status = "okay"; -}; - -&tmu_g3d { - vtmu-supply = <&ldo3_reg>; - status = "okay"; -}; - -&usbdrd30 { - vdd33-supply = <&ldo10_reg>; - vdd10-supply = <&ldo6_reg>; - status = "okay"; -}; - -&usbdrd_dwc3_0 { - dr_mode = "otg"; -}; - -&usbdrd30_phy { - vbus-supply = <&safeout1_reg>; - status = "okay"; }; -&xxti { - clock-frequency = <24000000>; +&cmu_disp { + /* + * TM2 and TM2e differ only by DISP_PLL rate, but define all assigned + * clocks properties for DISP CMU for each board to keep them together + * for easier review and maintenance. + */ + assigned-clocks = <&cmu_disp CLK_FOUT_DISP_PLL>, + <&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>, + <&cmu_disp CLK_MOUT_ACLK_DISP_333_USER>, + <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>, + <&cmu_disp CLK_MOUT_SCLK_DSIM0>, + <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>, + <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK>, + <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER>, + <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER>, + <&cmu_disp CLK_MOUT_DISP_PLL>, + <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>, + <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>, + <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>; + assigned-clock-parents = <0>, <0>, + <&cmu_mif CLK_ACLK_DISP_333>, + <&cmu_mif CLK_SCLK_DSIM0_DISP>, + <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>, + <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, + <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>, + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY>, + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY>, + <&cmu_disp CLK_FOUT_DISP_PLL>, + <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>, + <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>, + <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>; + assigned-clock-rates = <250000000>, <400000000>; +}; + +&hsi2c_9 { + status = "okay"; + + touchkey@20 { + compatible = "cypress,tm2-touchkey"; + reg = <0x20>; + interrupt-parent = <&gpa3>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + vcc-supply = <&ldo32_reg>; + vdd-supply = <&ldo33_reg>; + }; +}; + +&ldo31_reg { + regulator-name = "TSP_VDD_1.85V_AP"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; +}; + +&ldo38_reg { + regulator-name = "VCC_3.0V_MOTOR_AP"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; }; |