diff options
Diffstat (limited to 'arch/arm64/boot/dts/broadcom')
| -rw-r--r-- | arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 8 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/broadcom/bcm2837.dtsi | 8 | ||||
| l--------- | arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi | 1 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/broadcom/ns2-svk.dts | 38 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/broadcom/ns2.dtsi | 62 |
5 files changed, 108 insertions, 9 deletions
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts index 7841b724e340..c309633a1e87 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts +++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts @@ -2,6 +2,7 @@ #include "bcm2837.dtsi" #include "bcm2835-rpi.dtsi" #include "bcm283x-rpi-smsc9514.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" / { compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; @@ -15,13 +16,6 @@ act { gpios = <&gpio 47 0>; }; - - pwr { - label = "PWR"; - gpios = <&gpio 35 0>; - default-state = "keep"; - linux,default-trigger = "default-on"; - }; }; }; diff --git a/arch/arm64/boot/dts/broadcom/bcm2837.dtsi b/arch/arm64/boot/dts/broadcom/bcm2837.dtsi index 8216bbb29fe0..19f2fe620a21 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2837.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcm2837.dtsi @@ -1,7 +1,7 @@ #include "bcm283x.dtsi" / { - compatible = "brcm,bcm2836"; + compatible = "brcm,bcm2837"; soc { ranges = <0x7e000000 0x3f000000 0x1000000>, @@ -74,3 +74,9 @@ interrupt-parent = <&local_intc>; interrupts = <8>; }; + +/* enable thermal sensor with the correct compatible property set */ +&thermal { + compatible = "brcm,bcm2837-thermal"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi new file mode 120000 index 000000000000..cbeebe312ff8 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi @@ -0,0 +1 @@ +../../../../arm/boot/dts/bcm283x-rpi-usb-host.dtsi
\ No newline at end of file diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts index c4d544244b19..de8d379f44e2 100644 --- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts +++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts @@ -161,6 +161,10 @@ status = "ok"; }; +&sdio1 { + status = "ok"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -192,3 +196,37 @@ groups = "nand_grp"; }; }; + +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi index 773ed593da4d..4fcdeca3a983 100644 --- a/arch/arm64/boot/dts/broadcom/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi @@ -133,6 +133,9 @@ status = "disabled"; + phys = <&pci_phy0>; + phy-names = "pcie-phy"; + msi-parent = <&msi0>; msi0: msi@20020000 { compatible = "brcm,iproc-msi"; @@ -171,6 +174,9 @@ status = "disabled"; + phys = <&pci_phy1>; + phy-names = "pcie-phy"; + msi-parent = <&msi4>; msi4: msi@50020000 { compatible = "brcm,iproc-msi"; @@ -203,6 +209,42 @@ status = "disabled"; }; + pdc0: iproc-pdc0@612c0000 { + compatible = "brcm,iproc-pdc-mbox"; + reg = <0x612c0000 0x445>; /* PDC FS0 regs */ + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + brcm,rx-status-len = <32>; + brcm,use-bcm-hdr; + }; + + pdc1: iproc-pdc1@612e0000 { + compatible = "brcm,iproc-pdc-mbox"; + reg = <0x612e0000 0x445>; /* PDC FS1 regs */ + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + brcm,rx-status-len = <32>; + brcm,use-bcm-hdr; + }; + + pdc2: iproc-pdc2@61300000 { + compatible = "brcm,iproc-pdc-mbox"; + reg = <0x61300000 0x445>; /* PDC FS2 regs */ + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + brcm,rx-status-len = <32>; + brcm,use-bcm-hdr; + }; + + pdc3: iproc-pdc3@61320000 { + compatible = "brcm,iproc-pdc-mbox"; + reg = <0x61320000 0x445>; /* PDC FS3 regs */ + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + brcm,rx-status-len = <32>; + brcm,use-bcm-hdr; + }; + dma0: dma@61360000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x61360000 0x1000>; @@ -260,7 +302,7 @@ <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; - mmu-masters; + #iommu-cells = <1>; }; pinctrl: pinctrl@6501d130 { @@ -577,5 +619,23 @@ brcm,nand-has-wp; }; + + qspi: spi@66470200 { + compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi"; + reg = <0x66470200 0x184>, + <0x66470000 0x124>, + <0x67017408 0x004>, + <0x664703a0 0x01c>; + reg-names = "mspi", "bspi", "intr_regs", + "intr_status_reg"; + interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "spi_l1_intr"; + clocks = <&iprocmed>; + clock-names = "iprocmed"; + num-cs = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; }; |