summaryrefslogtreecommitdiff
path: root/arch/arm/plat-omap/include/plat
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/plat-omap/include/plat')
-rw-r--r--arch/arm/plat-omap/include/plat/board.h8
-rw-r--r--arch/arm/plat-omap/include/plat/clock.h130
-rw-r--r--arch/arm/plat-omap/include/plat/common.h9
-rw-r--r--arch/arm/plat-omap/include/plat/cpu.h17
-rw-r--r--arch/arm/plat-omap/include/plat/dma.h1
-rw-r--r--arch/arm/plat-omap/include/plat/dsp_common.h40
-rw-r--r--arch/arm/plat-omap/include/plat/gpmc.h42
-rw-r--r--arch/arm/plat-omap/include/plat/iommu.h2
-rw-r--r--arch/arm/plat-omap/include/plat/mailbox.h20
-rw-r--r--arch/arm/plat-omap/include/plat/mux.h224
-rw-r--r--arch/arm/plat-omap/include/plat/nand.h6
-rw-r--r--arch/arm/plat-omap/include/plat/omap-pm.h130
-rw-r--r--arch/arm/plat-omap/include/plat/omap_device.h2
-rw-r--r--arch/arm/plat-omap/include/plat/omap_hwmod.h14
-rw-r--r--arch/arm/plat-omap/include/plat/smp.h1
-rw-r--r--arch/arm/plat-omap/include/plat/uncompress.h6
-rw-r--r--arch/arm/plat-omap/include/plat/usb.h49
17 files changed, 351 insertions, 350 deletions
diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h
index 5cd622039da0..3cf4fa25ab3d 100644
--- a/arch/arm/plat-omap/include/plat/board.h
+++ b/arch/arm/plat-omap/include/plat/board.h
@@ -85,6 +85,14 @@ struct omap_usb_config {
* 6 == 6 wire unidirectional (or TLL)
*/
u8 pins[3];
+
+ struct platform_device *udc_device;
+ struct platform_device *ohci_device;
+ struct platform_device *otg_device;
+
+ u32 (*usb0_init)(unsigned nwires, unsigned is_device);
+ u32 (*usb1_init)(unsigned nwires);
+ u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
};
struct omap_lcd_config {
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index dfc472ca0cc4..fef4696dcf67 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -19,6 +19,22 @@ struct module;
struct clk;
struct clockdomain;
+/**
+ * struct clkops - some clock function pointers
+ * @enable: fn ptr that enables the current clock in hardware
+ * @disable: fn ptr that enables the current clock in hardware
+ * @find_idlest: function returning the IDLEST register for the clock's IP blk
+ * @find_companion: function returning the "companion" clk reg for the clock
+ *
+ * A "companion" clk is an accompanying clock to the one being queried
+ * that must be enabled for the IP module connected to the clock to
+ * become accessible by the hardware. Neither @find_idlest nor
+ * @find_companion should be needed; that information is IP
+ * block-specific; the hwmod code has been created to handle this, but
+ * until hwmod data is ready and drivers have been converted to use PM
+ * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
+ * @find_companion must, unfortunately, remain.
+ */
struct clkops {
int (*enable)(struct clk *);
void (*disable)(struct clk *);
@@ -30,12 +46,45 @@ struct clkops {
#ifdef CONFIG_ARCH_OMAP2PLUS
+/* struct clksel_rate.flags possibilities */
+#define RATE_IN_242X (1 << 0)
+#define RATE_IN_243X (1 << 1)
+#define RATE_IN_3XXX (1 << 2) /* rates common to all OMAP3 */
+#define RATE_IN_3430ES2 (1 << 3) /* 3430ES2 rates only */
+#define RATE_IN_36XX (1 << 4)
+#define RATE_IN_4430 (1 << 5)
+
+#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
+#define RATE_IN_3430ES2PLUS (RATE_IN_3430ES2 | RATE_IN_36XX)
+
+/**
+ * struct clksel_rate - register bitfield values corresponding to clk divisors
+ * @val: register bitfield value (shifted to bit 0)
+ * @div: clock divisor corresponding to @val
+ * @flags: (see "struct clksel_rate.flags possibilities" above)
+ *
+ * @val should match the value of a read from struct clk.clksel_reg
+ * AND'ed with struct clk.clksel_mask, shifted right to bit 0.
+ *
+ * @div is the divisor that should be applied to the parent clock's rate
+ * to produce the current clock's rate.
+ *
+ * XXX @flags probably should be replaced with an struct omap_chip.
+ */
struct clksel_rate {
u32 val;
u8 div;
u8 flags;
};
+/**
+ * struct clksel - available parent clocks, and a pointer to their divisors
+ * @parent: struct clk * to a possible parent clock
+ * @rates: available divisors for this parent clock
+ *
+ * A struct clksel is always associated with one or more struct clks
+ * and one or more struct clksel_rates.
+ */
struct clksel {
struct clk *parent;
const struct clksel_rate *rates;
@@ -116,6 +165,60 @@ struct dpll_data {
#endif
+/* struct clk.flags possibilities */
+#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL (1 << 1)
+#define CLOCK_NO_IDLE_PARENT (1 << 2)
+#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */
+#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
+
+/**
+ * struct clk - OMAP struct clk
+ * @node: list_head connecting this clock into the full clock list
+ * @ops: struct clkops * for this clock
+ * @name: the name of the clock in the hardware (used in hwmod data and debug)
+ * @parent: pointer to this clock's parent struct clk
+ * @children: list_head connecting to the child clks' @sibling list_heads
+ * @sibling: list_head connecting this clk to its parent clk's @children
+ * @rate: current clock rate
+ * @enable_reg: register to write to enable the clock (see @enable_bit)
+ * @recalc: fn ptr that returns the clock's current rate
+ * @set_rate: fn ptr that can change the clock's current rate
+ * @round_rate: fn ptr that can round the clock's current rate
+ * @init: fn ptr to do clock-specific initialization
+ * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
+ * @usecount: number of users that have requested this clock to be enabled
+ * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
+ * @flags: see "struct clk.flags possibilities" above
+ * @clksel_reg: for clksel clks, register va containing src/divisor select
+ * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
+ * @clksel: for clksel clks, pointer to struct clksel for this clock
+ * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
+ * @clkdm_name: clockdomain name that this clock is contained in
+ * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
+ * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
+ * @src_offset: bitshift for source selection bitfield (OMAP1 only)
+ *
+ * XXX @rate_offset, @src_offset should probably be removed and OMAP1
+ * clock code converted to use clksel.
+ *
+ * XXX @usecount is poorly named. It should be "enable_count" or
+ * something similar. "users" in the description refers to kernel
+ * code (core code or drivers) that have called clk_enable() and not
+ * yet called clk_disable(); the usecount of parent clocks is also
+ * incremented by the clock code when clk_enable() is called on child
+ * clocks and decremented by the clock code when clk_disable() is
+ * called on child clocks.
+ *
+ * XXX @clkdm, @usecount, @children, @sibling should be marked for
+ * internal use only.
+ *
+ * @children and @sibling are used to optimize parent-to-child clock
+ * tree traversals. (child-to-parent traversals use @parent.)
+ *
+ * XXX The notion of the clock's current rate probably needs to be
+ * separated from the clock's target rate.
+ */
struct clk {
struct list_head node;
const struct clkops *ops;
@@ -129,8 +232,8 @@ struct clk {
int (*set_rate)(struct clk *, unsigned long);
long (*round_rate)(struct clk *, unsigned long);
void (*init)(struct clk *);
- __u8 enable_bit;
- __s8 usecount;
+ u8 enable_bit;
+ s8 usecount;
u8 fixed_div;
u8 flags;
#ifdef CONFIG_ARCH_OMAP2PLUS
@@ -141,8 +244,8 @@ struct clk {
const char *clkdm_name;
struct clockdomain *clkdm;
#else
- __u8 rate_offset;
- __u8 src_offset;
+ u8 rate_offset;
+ u8 src_offset;
#endif
#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
struct dentry *dent; /* For visible tree hierarchy */
@@ -188,23 +291,4 @@ extern const struct clkops clkops_null;
extern struct clk dummy_ck;
-/* Clock flags */
-#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */
-#define CLOCK_IDLE_CONTROL (1 << 1)
-#define CLOCK_NO_IDLE_PARENT (1 << 2)
-#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */
-#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
-
-/* Clksel_rate flags */
-#define RATE_IN_242X (1 << 0)
-#define RATE_IN_243X (1 << 1)
-#define RATE_IN_3XXX (1 << 2) /* rates common to all OMAP3 */
-#define RATE_IN_3430ES2 (1 << 3) /* 3430ES2 rates only */
-#define RATE_IN_36XX (1 << 4)
-#define RATE_IN_4430 (1 << 5)
-
-#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
-
-#define RATE_IN_3430ES2PLUS (RATE_IN_3430ES2 | RATE_IN_36XX)
-
#endif
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index 5e4afbee0fd7..9776b41ad76f 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -58,8 +58,7 @@ struct omap_globals {
void omap2_set_globals_242x(void);
void omap2_set_globals_243x(void);
-void omap2_set_globals_343x(void);
-void omap2_set_globals_36xx(void);
+void omap2_set_globals_3xxx(void);
void omap2_set_globals_443x(void);
/* These get called from omap2_set_globals_xxxx(), do not call these */
@@ -69,6 +68,8 @@ void omap2_set_globals_control(struct omap_globals *);
void omap2_set_globals_prcm(struct omap_globals *);
void omap2_set_globals_uart(struct omap_globals *);
+void omap3_map_io(void);
+
/**
* omap_test_timeout - busy-loop, testing a condition
* @cond: condition to test until it evaluates to true
@@ -89,4 +90,8 @@ void omap2_set_globals_uart(struct omap_globals *);
} \
})
+extern struct device *omap2_get_mpuss_device(void);
+extern struct device *omap2_get_dsp_device(void);
+extern struct device *omap2_get_l3_device(void);
+
#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 75141742300c..2e2ae530fced 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -66,6 +66,8 @@ unsigned int omap_rev(void);
* family. This difference can be handled separately.
*/
#define OMAP_REVBITS_00 0x00
+#define OMAP_REVBITS_01 0x01
+#define OMAP_REVBITS_02 0x02
#define OMAP_REVBITS_10 0x10
#define OMAP_REVBITS_20 0x20
#define OMAP_REVBITS_30 0x30
@@ -376,6 +378,8 @@ IS_OMAP_TYPE(3517, 0x3517)
#define OMAP3430_REV_ES3_1_2 0x34305034
#define OMAP3630_REV_ES1_0 0x36300034
+#define OMAP3630_REV_ES1_1 0x36300134
+#define OMAP3630_REV_ES1_2 0x36300234
#define OMAP35XX_CLASS 0x35000034
#define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 8))
@@ -411,6 +415,8 @@ IS_OMAP_TYPE(3517, 0x3517)
#define CHIP_IS_OMAP3430ES3_1 (1 << 6)
#define CHIP_IS_OMAP3630ES1 (1 << 7)
#define CHIP_IS_OMAP4430ES1 (1 << 8)
+#define CHIP_IS_OMAP3630ES1_1 (1 << 9)
+#define CHIP_IS_OMAP3630ES1_2 (1 << 10)
#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
@@ -424,11 +430,12 @@ IS_OMAP_TYPE(3517, 0x3517)
*/
#define CHIP_GE_OMAP3430ES2 (CHIP_IS_OMAP3430ES2 | \
CHIP_IS_OMAP3430ES3_0 | \
- CHIP_IS_OMAP3430ES3_1 | \
- CHIP_IS_OMAP3630ES1)
+ CHIP_GE_OMAP3430ES3_1)
#define CHIP_GE_OMAP3430ES3_1 (CHIP_IS_OMAP3430ES3_1 | \
- CHIP_IS_OMAP3630ES1)
-
+ CHIP_IS_OMAP3630ES1 | \
+ CHIP_GE_OMAP3630ES1_1)
+#define CHIP_GE_OMAP3630ES1_1 (CHIP_IS_OMAP3630ES1_1 | \
+ CHIP_IS_OMAP3630ES1_2)
int omap_chip_is(struct omap_chip_id oci);
void omap2_check_revision(void);
@@ -444,6 +451,7 @@ extern u32 omap3_features;
#define OMAP3_HAS_NEON BIT(3)
#define OMAP3_HAS_ISP BIT(4)
#define OMAP3_HAS_192MHZ_CLK BIT(5)
+#define OMAP3_HAS_IO_WAKEUP BIT(6)
#define OMAP3_HAS_FEATURE(feat,flag) \
static inline unsigned int omap3_has_ ##feat(void) \
@@ -457,5 +465,6 @@ OMAP3_HAS_FEATURE(iva, IVA)
OMAP3_HAS_FEATURE(neon, NEON)
OMAP3_HAS_FEATURE(isp, ISP)
OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
+OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
#endif
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h
index 02232ca2c37f..af3a03941add 100644
--- a/arch/arm/plat-omap/include/plat/dma.h
+++ b/arch/arm/plat-omap/include/plat/dma.h
@@ -345,6 +345,7 @@
#define OMAP_DMA_SYNC_BLOCK 0x02
#define OMAP_DMA_SYNC_PACKET 0x03
+#define OMAP_DMA_DST_SYNC_PREFETCH 0x02
#define OMAP_DMA_SRC_SYNC 0x01
#define OMAP_DMA_DST_SYNC 0x00
diff --git a/arch/arm/plat-omap/include/plat/dsp_common.h b/arch/arm/plat-omap/include/plat/dsp_common.h
deleted file mode 100644
index da97736f3efa..000000000000
--- a/arch/arm/plat-omap/include/plat/dsp_common.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * This file is part of OMAP DSP driver (DSP Gateway version 3.3.1)
- *
- * Copyright (C) 2004-2006 Nokia Corporation. All rights reserved.
- *
- * Contact: Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef ASM_ARCH_DSP_COMMON_H
-#define ASM_ARCH_DSP_COMMON_H
-
-#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_OMAP_MMU_FWK)
-extern void omap_dsp_request_mpui(void);
-extern void omap_dsp_release_mpui(void);
-extern int omap_dsp_request_mem(void);
-extern int omap_dsp_release_mem(void);
-#else
-static inline int omap_dsp_request_mem(void)
-{
- return 0;
-}
-#define omap_dsp_release_mem() do {} while (0)
-#endif
-
-#endif /* ASM_ARCH_DSP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index 145838a81ef6..9fd99b9e40ab 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -25,10 +25,26 @@
#define GPMC_CS_NAND_ADDRESS 0x20
#define GPMC_CS_NAND_DATA 0x24
-#define GPMC_CONFIG 0x50
-#define GPMC_STATUS 0x54
-#define GPMC_CS0_BASE 0x60
-#define GPMC_CS_SIZE 0x30
+/* Control Commands */
+#define GPMC_CONFIG_RDY_BSY 0x00000001
+#define GPMC_CONFIG_DEV_SIZE 0x00000002
+#define GPMC_CONFIG_DEV_TYPE 0x00000003
+#define GPMC_SET_IRQ_STATUS 0x00000004
+#define GPMC_CONFIG_WP 0x00000005
+
+#define GPMC_GET_IRQ_STATUS 0x00000006
+#define GPMC_PREFETCH_FIFO_CNT 0x00000007 /* bytes available in FIFO for r/w */
+#define GPMC_PREFETCH_COUNT 0x00000008 /* remaining bytes to be read/write*/
+#define GPMC_STATUS_BUFFER 0x00000009 /* 1: buffer is available to write */
+
+#define GPMC_NAND_COMMAND 0x0000000a
+#define GPMC_NAND_ADDRESS 0x0000000b
+#define GPMC_NAND_DATA 0x0000000c
+
+/* ECC commands */
+#define GPMC_ECC_READ 0 /* Reset Hardware ECC for read */
+#define GPMC_ECC_WRITE 1 /* Reset Hardware ECC for write */
+#define GPMC_ECC_READSYN 2 /* Reset before syndrom is read back */
#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31)
#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30)
@@ -47,7 +63,6 @@
#define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1)
#define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10)
#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0)
-#define GPMC_CONFIG1_DEVICETYPE_NAND GPMC_CONFIG1_DEVICETYPE(2)
#define GPMC_CONFIG1_MUXADDDATA (1 << 9)
#define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4)
#define GPMC_CONFIG1_FCLK_DIV(val) (val & 3)
@@ -56,6 +71,14 @@
#define GPMC_CONFIG1_FCLK_DIV4 (GPMC_CONFIG1_FCLK_DIV(3))
#define GPMC_CONFIG7_CSVALID (1 << 6)
+#define GPMC_DEVICETYPE_NOR 0
+#define GPMC_DEVICETYPE_NAND 2
+#define GPMC_CONFIG_WRITEPROTECT 0x00000010
+#define GPMC_STATUS_BUFF_EMPTY 0x00000001
+#define WR_RD_PIN_MONITORING 0x00600000
+#define GPMC_PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F)
+#define GPMC_PREFETCH_STATUS_COUNT(val) (val & 0x00003fff)
+
/*
* Note that all values in this struct are in nanoseconds, while
* the register values are in gpmc_fck cycles.
@@ -108,10 +131,15 @@ extern int gpmc_cs_set_reserved(int cs, int reserved);
extern int gpmc_cs_reserved(int cs);
extern int gpmc_prefetch_enable(int cs, int dma_mode,
unsigned int u32_count, int is_write);
-extern void gpmc_prefetch_reset(void);
-extern int gpmc_prefetch_status(void);
+extern int gpmc_prefetch_reset(int cs);
extern void omap3_gpmc_save_context(void);
extern void omap3_gpmc_restore_context(void);
extern void gpmc_init(void);
+extern int gpmc_read_status(int cmd);
+extern int gpmc_cs_configure(int cs, int cmd, int wval);
+extern int gpmc_nand_read(int cs, int cmd);
+extern int gpmc_nand_write(int cs, int cmd, int wval);
+int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size);
+int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code);
#endif
diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h
index 0752af9d099e..33c7d41cb6a5 100644
--- a/arch/arm/plat-omap/include/plat/iommu.h
+++ b/arch/arm/plat-omap/include/plat/iommu.h
@@ -80,6 +80,7 @@ struct iommu_functions {
int (*enable)(struct iommu *obj);
void (*disable)(struct iommu *obj);
+ void (*set_twl)(struct iommu *obj, bool on);
u32 (*fault_isr)(struct iommu *obj, u32 *ra);
void (*tlb_read_cr)(struct iommu *obj, struct cr_regs *cr);
@@ -143,6 +144,7 @@ extern void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e);
extern u32 iotlb_cr_to_virt(struct cr_regs *cr);
extern int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e);
+extern void iommu_set_twl(struct iommu *obj, bool on);
extern void flush_iotlb_page(struct iommu *obj, u32 da);
extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end);
extern void flush_iotlb_all(struct iommu *obj);
diff --git a/arch/arm/plat-omap/include/plat/mailbox.h b/arch/arm/plat-omap/include/plat/mailbox.h
index 729166b76a7c..997656552109 100644
--- a/arch/arm/plat-omap/include/plat/mailbox.h
+++ b/arch/arm/plat-omap/include/plat/mailbox.h
@@ -3,10 +3,11 @@
#ifndef MAILBOX_H
#define MAILBOX_H
-#include <linux/wait.h>
+#include <linux/spinlock.h>
#include <linux/workqueue.h>
-#include <linux/blkdev.h>
#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/kfifo.h>
typedef u32 mbox_msg_t;
struct omap_mbox;
@@ -42,7 +43,7 @@ struct omap_mbox_ops {
struct omap_mbox_queue {
spinlock_t lock;
- struct request_queue *queue;
+ struct kfifo fifo;
struct work_struct work;
struct tasklet_struct tasklet;
int (*callback)(void *);
@@ -52,19 +53,10 @@ struct omap_mbox_queue {
struct omap_mbox {
char *name;
unsigned int irq;
-
struct omap_mbox_queue *txq, *rxq;
-
struct omap_mbox_ops *ops;
-
- mbox_msg_t seq_snd, seq_rcv;
-
struct device *dev;
-
- struct omap_mbox *next;
void *priv;
-
- void (*err_notify)(void);
};
int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg);
@@ -73,8 +65,8 @@ void omap_mbox_init_seq(struct omap_mbox *);
struct omap_mbox *omap_mbox_get(const char *);
void omap_mbox_put(struct omap_mbox *);
-int omap_mbox_register(struct device *parent, struct omap_mbox *);
-int omap_mbox_unregister(struct omap_mbox *);
+int omap_mbox_register(struct device *parent, struct omap_mbox **);
+int omap_mbox_unregister(void);
static inline void omap_mbox_save_ctx(struct omap_mbox *mbox)
{
diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h
index c7472a28ce24..aeba71796ad9 100644
--- a/arch/arm/plat-omap/include/plat/mux.h
+++ b/arch/arm/plat-omap/include/plat/mux.h
@@ -114,28 +114,11 @@
PU_PD_REG(NA, 0) \
},
-#define MUX_CFG_24XX(desc, reg_offset, mode, \
- pull_en, pull_mode, dbg) \
-{ \
- .name = desc, \
- .debug = dbg, \
- .mux_reg = reg_offset, \
- .mask = mode, \
- .pull_val = pull_en, \
- .pu_pd_val = pull_mode, \
-},
-
-/* 24xx/34xx mux bit defines */
-#define OMAP2_PULL_ENA (1 << 3)
-#define OMAP2_PULL_UP (1 << 4)
-#define OMAP2_ALTELECTRICALSEL (1 << 5)
-
struct pin_config {
char *name;
const unsigned int mux_reg;
unsigned char debug;
-#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2)
const unsigned char mask_offset;
const unsigned char mask;
@@ -147,7 +130,6 @@ struct pin_config {
const char *pu_pd_name;
const unsigned int pu_pd_reg;
const unsigned char pu_pd_val;
-#endif
#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
const char *mux_reg_name;
@@ -191,6 +173,10 @@ enum omap7xx_index {
SPI_7XX_4,
SPI_7XX_5,
SPI_7XX_6,
+
+ /* UART */
+ UART_7XX_1,
+ UART_7XX_2,
};
enum omap1xxx_index {
@@ -446,208 +432,6 @@ enum omap1xxx_index {
};
-enum omap24xx_index {
- /* 24xx I2C */
- M19_24XX_I2C1_SCL,
- L15_24XX_I2C1_SDA,
- J15_24XX_I2C2_SCL,
- H19_24XX_I2C2_SDA,
-
- /* 24xx Menelaus interrupt */
- W19_24XX_SYS_NIRQ,
-
- /* 24xx clock */
- W14_24XX_SYS_CLKOUT,
-
- /* 24xx GPMC chipselects, wait pin monitoring */
- E2_GPMC_NCS2,
- L2_GPMC_NCS7,
- L3_GPMC_WAIT0,
- N7_GPMC_WAIT1,
- M1_GPMC_WAIT2,
- P1_GPMC_WAIT3,
-
- /* 242X McBSP */
- Y15_24XX_MCBSP2_CLKX,
- R14_24XX_MCBSP2_FSX,
- W15_24XX_MCBSP2_DR,
- V15_24XX_MCBSP2_DX,
-
- /* 24xx GPIO */
- M21_242X_GPIO11,
- P21_242X_GPIO12,
- AA10_242X_GPIO13,
- AA6_242X_GPIO14,
- AA4_242X_GPIO15,
- Y11_242X_GPIO16,
- AA12_242X_GPIO17,
- AA8_242X_GPIO58,
- Y20_24XX_GPIO60,
- W4__24XX_GPIO74,
- N15_24XX_GPIO85,
- M15_24XX_GPIO92,
- P20_24XX_GPIO93,
- P18_24XX_GPIO95,
- M18_24XX_GPIO96,
- L14_24XX_GPIO97,
- J15_24XX_GPIO99,
- V14_24XX_GPIO117,
- P14_24XX_GPIO125,
-
- /* 242x DBG GPIO */
- V4_242X_GPIO49,
- W2_242X_GPIO50,
- U4_242X_GPIO51,
- V3_242X_GPIO52,
- V2_242X_GPIO53,
- V6_242X_GPIO53,
- T4_242X_GPIO54,
- Y4_242X_GPIO54,
- T3_242X_GPIO55,
- U2_242X_GPIO56,
-
- /* 24xx external DMA requests */
- AA10_242X_DMAREQ0,
- AA6_242X_DMAREQ1,
- E4_242X_DMAREQ2,
- G4_242X_DMAREQ3,
- D3_242X_DMAREQ4,
- E3_242X_DMAREQ5,
-
- /* UART3 */
- K15_24XX_UART3_TX,
- K14_24XX_UART3_RX,
-
- /* MMC/SDIO */
- G19_24XX_MMC_CLKO,
- H18_24XX_MMC_CMD,
- F20_24XX_MMC_DAT0,
- H14_24XX_MMC_DAT1,
- E19_24XX_MMC_DAT2,
- D19_24XX_MMC_DAT3,
- F19_24XX_MMC_DAT_DIR0,
- E20_24XX_MMC_DAT_DIR1,
- F18_24XX_MMC_DAT_DIR2,
- E18_24XX_MMC_DAT_DIR3,
- G18_24XX_MMC_CMD_DIR,
- H15_24XX_MMC_CLKI,
-
- /* Full speed USB */
- J20_24XX_USB0_PUEN,
- J19_24XX_USB0_VP,
- K20_24XX_USB0_VM,
- J18_24XX_USB0_RCV,
- K19_24XX_USB0_TXEN,
- J14_24XX_USB0_SE0,
- K18_24XX_USB0_DAT,
-
- N14_24XX_USB1_SE0,
- W12_24XX_USB1_SE0,
- P15_24XX_USB1_DAT,
- R13_24XX_USB1_DAT,
- W20_24XX_USB1_TXEN,
- P13_24XX_USB1_TXEN,
- V19_24XX_USB1_RCV,
- V12_24XX_USB1_RCV,
-
- AA10_24XX_USB2_SE0,
- Y11_24XX_USB2_DAT,
- AA12_24XX_USB2_TXEN,
- AA6_24XX_USB2_RCV,
- AA4_24XX_USB2_TLLSE0,
-
- /* Keypad GPIO*/
- T19_24XX_KBR0,
- R19_24XX_KBR1,
- V18_24XX_KBR2,
- M21_24XX_KBR3,
- E5__24XX_KBR4,
- M18_24XX_KBR5,
- R20_24XX_KBC0,
- M14_24XX_KBC1,
- H19_24XX_KBC2,
- V17_24XX_KBC3,
- P21_24XX_KBC4,
- L14_24XX_KBC5,
- N19_24XX_KBC6,
-
- /* 24xx Menelaus Keypad GPIO */
- B3__24XX_KBR5,
- AA4_24XX_KBC2,
- B13_24XX_KBC6,
-
- /* 2430 USB */
- AD9_2430_USB0_PUEN,
- Y11_2430_USB0_VP,
- AD7_2430_USB0_VM,
- AE7_2430_USB0_RCV,
- AD4_2430_USB0_TXEN,
- AF9_2430_USB0_SE0,
- AE6_2430_USB0_DAT,
- AD24_2430_USB1_SE0,
- AB24_2430_USB1_RCV,
- Y25_2430_USB1_TXEN,
- AA26_2430_USB1_DAT,
-
- /* 2430 HS-USB */
- AD9_2430_USB0HS_DATA3,
- Y11_2430_USB0HS_DATA4,
- AD7_2430_USB0HS_DATA5,
- AE7_2430_USB0HS_DATA6,
- AD4_2430_USB0HS_DATA2,
- AF9_2430_USB0HS_DATA0,
- AE6_2430_USB0HS_DATA1,
- AE8_2430_USB0HS_CLK,
- AD8_2430_USB0HS_DIR,
- AE5_2430_USB0HS_STP,
- AE9_2430_USB0HS_NXT,
- AC7_2430_USB0HS_DATA7,
-
- /* 2430 McBSP */
- AD6_2430_MCBSP_CLKS,
-
- AB2_2430_MCBSP1_CLKR,
- AD5_2430_MCBSP1_FSR,
- AA1_2430_MCBSP1_DX,
- AF3_2430_MCBSP1_DR,
- AB3_2430_MCBSP1_FSX,
- Y9_2430_MCBSP1_CLKX,
-
- AC10_2430_MCBSP2_FSX,
- AD16_2430_MCBSP2_CLX,
- AE13_2430_MCBSP2_DX,
- AD13_2430_MCBSP2_DR,
- AC10_2430_MCBSP2_FSX_OFF,
- AD16_2430_MCBSP2_CLX_OFF,
- AE13_2430_MCBSP2_DX_OFF,
- AD13_2430_MCBSP2_DR_OFF,
-
- AC9_2430_MCBSP3_CLKX,
- AE4_2430_MCBSP3_FSX,
- AE2_2430_MCBSP3_DR,
- AF4_2430_MCBSP3_DX,
-
- N3_2430_MCBSP4_CLKX,
- AD23_2430_MCBSP4_DR,
- AB25_2430_MCBSP4_DX,
- AC25_2430_MCBSP4_FSX,
-
- AE16_2430_MCBSP5_CLKX,
- AF12_2430_MCBSP5_FSX,
- K7_2430_MCBSP5_DX,
- M1_2430_MCBSP5_DR,
-
- /* 2430 McSPI*/
- Y18_2430_MCSPI1_CLK,
- AD15_2430_MCSPI1_SIMO,
- AE17_2430_MCSPI1_SOMI,
- U1_2430_MCSPI1_CS0,
-
- /* Touchscreen GPIO */
- AF19_2430_GPIO_85,
-
-};
-
struct omap_mux_cfg {
struct pin_config *pins;
unsigned long size;
diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h
index f8efd5466b1d..6562cd082bb1 100644
--- a/arch/arm/plat-omap/include/plat/nand.h
+++ b/arch/arm/plat-omap/include/plat/nand.h
@@ -21,13 +21,11 @@ struct omap_nand_platform_data {
int (*dev_ready)(struct omap_nand_platform_data *);
int dma_channel;
unsigned long phys_base;
- void __iomem *gpmc_cs_baseaddr;
- void __iomem *gpmc_baseaddr;
int devsize;
};
-/* size (4 KiB) for IO mapping */
-#define NAND_IO_SIZE SZ_4K
+/* minimum size for IO mapping */
+#define NAND_IO_SIZE 4
#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
extern int gpmc_nand_init(struct omap_nand_platform_data *d);
diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h
index 3ee41d711492..728fbb9dd549 100644
--- a/arch/arm/plat-omap/include/plat/omap-pm.h
+++ b/arch/arm/plat-omap/include/plat/omap-pm.h
@@ -1,8 +1,8 @@
/*
* omap-pm.h - OMAP power management interface
*
- * Copyright (C) 2008-2009 Texas Instruments, Inc.
- * Copyright (C) 2008-2009 Nokia Corporation
+ * Copyright (C) 2008-2010 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
* Paul Walmsley
*
* Interface developed by (in alphabetical order): Karthik Dasu, Jouni
@@ -16,6 +16,7 @@
#include <linux/device.h>
#include <linux/cpufreq.h>
+#include <linux/clk.h>
#include "powerdomain.h"
@@ -89,7 +90,7 @@ void omap_pm_if_exit(void);
* @t: maximum MPU wakeup latency in microseconds
*
* Request that the maximum interrupt latency for the MPU to be no
- * greater than 't' microseconds. "Interrupt latency" in this case is
+ * greater than @t microseconds. "Interrupt latency" in this case is
* defined as the elapsed time from the occurrence of a hardware or
* timer interrupt to the time when the device driver's interrupt
* service routine has been entered by the MPU.
@@ -105,15 +106,19 @@ void omap_pm_if_exit(void);
* elapsed from when a device driver enables a hardware device with
* clk_enable(), to when the device is ready for register access or
* other use. To control this device wakeup latency, use
- * set_max_dev_wakeup_lat()
+ * omap_pm_set_max_dev_wakeup_lat()
*
- * Multiple calls to set_max_mpu_wakeup_lat() will replace the
+ * Multiple calls to omap_pm_set_max_mpu_wakeup_lat() will replace the
* previous t value. To remove the latency target for the MPU, call
* with t = -1.
*
- * No return value.
+ * XXX This constraint will be deprecated soon in favor of the more
+ * general omap_pm_set_max_dev_wakeup_lat()
+ *
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
*/
-void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
+int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
/**
@@ -123,8 +128,8 @@ void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
* @r: minimum throughput (in KiB/s)
*
* Request that the minimum data throughput on the OCP interconnect
- * attached to device 'dev' interconnect agent 'tbus_id' be no less
- * than 'r' KiB/s.
+ * attached to device @dev interconnect agent @tbus_id be no less
+ * than @r KiB/s.
*
* It is expected that the OMAP PM or bus code will use this
* information to set the interconnect clock to run at the lowest
@@ -138,40 +143,44 @@ void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
* code will also need to add an minimum L3 interconnect speed
* constraint,
*
- * Multiple calls to set_min_bus_tput() will replace the previous rate
- * value for this device. To remove the interconnect throughput
- * restriction for this device, call with r = 0.
+ * Multiple calls to omap_pm_set_min_bus_tput() will replace the
+ * previous rate value for this device. To remove the interconnect
+ * throughput restriction for this device, call with r = 0.
*
- * No return value.
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
*/
-void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r);
+int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r);
/**
* omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency
- * @dev: struct device *
+ * @req_dev: struct device * requesting the constraint, or NULL if none
+ * @dev: struct device * to set the constraint one
* @t: maximum device wakeup latency in microseconds
*
- * Request that the maximum amount of time necessary for a device to
- * become accessible after its clocks are enabled should be no greater
- * than 't' microseconds. Specifically, this represents the time from
- * when a device driver enables device clocks with clk_enable(), to
- * when the register reads and writes on the device will succeed.
- * This function should be called before clk_disable() is called,
- * since the power state transition decision may be made during
- * clk_disable().
+ * Request that the maximum amount of time necessary for a device @dev
+ * to become accessible after its clocks are enabled should be no
+ * greater than @t microseconds. Specifically, this represents the
+ * time from when a device driver enables device clocks with
+ * clk_enable(), to when the register reads and writes on the device
+ * will succeed. This function should be called before clk_disable()
+ * is called, since the power state transition decision may be made
+ * during clk_disable().
*
* It is intended that underlying PM code will use this information to
* determine what power state to put the powerdomain enclosing this
* device into.
*
- * Multiple calls to set_max_dev_wakeup_lat() will replace the
- * previous wakeup latency values for this device. To remove the wakeup
- * latency restriction for this device, call with t = -1.
+ * Multiple calls to omap_pm_set_max_dev_wakeup_lat() will replace the
+ * previous wakeup latency values for this device. To remove the
+ * wakeup latency restriction for this device, call with t = -1.
*
- * No return value.
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
*/
-void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t);
+int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev,
+ long t);
/**
@@ -198,10 +207,71 @@ void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t);
* value for this device. To remove the maximum DMA latency for this
* device, call with t = -1.
*
- * No return value.
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
*/
-void omap_pm_set_max_sdma_lat(struct device *dev, long t);
+int omap_pm_set_max_sdma_lat(struct device *dev, long t);
+
+/**
+ * omap_pm_set_min_clk_rate - set minimum clock rate requested by @dev
+ * @dev: struct device * requesting the constraint
+ * @clk: struct clk * to set the minimum rate constraint on
+ * @r: minimum rate in Hz
+ *
+ * Request that the minimum clock rate on the device @dev's clk @clk
+ * be no less than @r Hz.
+ *
+ * It is expected that the OMAP PM code will use this information to
+ * find an OPP or clock setting that will satisfy this clock rate
+ * constraint, along with any other applicable system constraints on
+ * the clock rate or corresponding voltage, etc.
+ *
+ * omap_pm_set_min_clk_rate() differs from the clock code's
+ * clk_set_rate() in that it considers other constraints before taking
+ * any hardware action, and may change a system OPP rather than just a
+ * clock rate. clk_set_rate() is intended to be a low-level
+ * interface.
+ *
+ * omap_pm_set_min_clk_rate() is easily open to abuse. A better API
+ * would be something like "omap_pm_set_min_dev_performance()";
+ * however, there is no easily-generalizable concept of performance
+ * that applies to all devices. Only a device (and possibly the
+ * device subsystem) has both the subsystem-specific knowledge, and
+ * the hardware IP block-specific knowledge, to translate a constraint
+ * on "touchscreen sampling accuracy" or "number of pixels or polygons
+ * rendered per second" to a clock rate. This translation can be
+ * dependent on the hardware IP block's revision, or firmware version,
+ * and the driver is the only code on the system that has this
+ * information and can know how to translate that into a clock rate.
+ *
+ * The intended use-case for this function is for userspace or other
+ * kernel code to communicate a particular performance requirement to
+ * a subsystem; then for the subsystem to communicate that requirement
+ * to something that is meaningful to the device driver; then for the
+ * device driver to convert that requirement to a clock rate, and to
+ * then call omap_pm_set_min_clk_rate().
+ *
+ * Users of this function (such as device drivers) should not simply
+ * call this function with some high clock rate to ensure "high
+ * performance." Rather, the device driver should take a performance
+ * constraint from its subsystem, such as "render at least X polygons
+ * per second," and use some formula or table to convert that into a
+ * clock rate constraint given the hardware type and hardware
+ * revision. Device drivers or subsystems should not assume that they
+ * know how to make a power/performance tradeoff - some device use
+ * cases may tolerate a lower-fidelity device function for lower power
+ * consumption; others may demand a higher-fidelity device function,
+ * no matter what the power consumption.
+ *
+ * Multiple calls to omap_pm_set_min_clk_rate() will replace the
+ * previous rate value for the device @dev. To remove the minimum clock
+ * rate constraint for the device, call with r = 0.
+ *
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
+ */
+int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r);
/*
* DSP Bridge-specific constraints
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index 3694b622c4ac..25cd9ac3b095 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -101,6 +101,8 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
int omap_device_register(struct omap_device *od);
int omap_early_device_register(struct omap_device *od);
+void __iomem *omap_device_get_rt_va(struct omap_device *od);
+
/* OMAP PM interface */
int omap_device_align_pm_lat(struct platform_device *pdev,
u32 new_wakeup_lat_limit);
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 0eccc09ac4a9..a4e508dfaba2 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -1,7 +1,7 @@
/*
* omap_hwmod macros, structures
*
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Nokia Corporation
* Paul Walmsley
*
* Created in collaboration with (alphabetical order): Benoît Cousson,
@@ -419,7 +419,7 @@ struct omap_hwmod_class {
* @slaves: ptr to array of OCP ifs that this hwmod can respond on
* @dev_attr: arbitrary device attributes that can be passed to the driver
* @_sysc_cache: internal-use hwmod flags
- * @_rt_va: cached register target start address (internal use)
+ * @_mpu_rt_va: cached register target start address (internal use)
* @_mpu_port_index: cached MPU register target slave ID (internal use)
* @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6)
* @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift
@@ -460,7 +460,7 @@ struct omap_hwmod {
struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */
void *dev_attr;
u32 _sysc_cache;
- void __iomem *_rt_va;
+ void __iomem *_mpu_rt_va;
struct list_head node;
u16 flags;
u8 _mpu_port_index;
@@ -482,11 +482,14 @@ int omap_hwmod_init(struct omap_hwmod **ohs);
int omap_hwmod_register(struct omap_hwmod *oh);
int omap_hwmod_unregister(struct omap_hwmod *oh);
struct omap_hwmod *omap_hwmod_lookup(const char *name);
-int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh));
-int omap_hwmod_late_init(void);
+int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
+ void *data);
+int omap_hwmod_late_init(u8 skip_setup_idle);
int omap_hwmod_enable(struct omap_hwmod *oh);
+int _omap_hwmod_enable(struct omap_hwmod *oh);
int omap_hwmod_idle(struct omap_hwmod *oh);
+int _omap_hwmod_idle(struct omap_hwmod *oh);
int omap_hwmod_shutdown(struct omap_hwmod *oh);
int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
@@ -504,6 +507,7 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh);
int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
+void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh);
int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
struct omap_hwmod *init_oh);
diff --git a/arch/arm/plat-omap/include/plat/smp.h b/arch/arm/plat-omap/include/plat/smp.h
index 8983d54c4fd2..6a3ff65c0303 100644
--- a/arch/arm/plat-omap/include/plat/smp.h
+++ b/arch/arm/plat-omap/include/plat/smp.h
@@ -30,6 +30,7 @@
extern void omap_secondary_startup(void);
extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
extern void omap_auxcoreboot_addr(u32 cpu_addr);
+extern u32 omap_read_auxcoreboot0(void);
/*
* We use Soft IRQ1 as the IPI
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index bbedd71943f6..ddf723be48dc 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -25,6 +25,8 @@
#include <plat/serial.h>
+#define MDR1_MODE_MASK 0x07
+
static volatile u8 *uart_base;
static int uart_shift;
@@ -42,6 +44,10 @@ static void putc(int c)
if (!uart_base)
return;
+ /* Check for UART 16x mode */
+ if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0)
+ return;
+
while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
barrier();
uart_base[UART_TX << uart_shift] = c;
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 98eef5360e6d..2a9427c8cc48 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -81,7 +81,34 @@ extern void usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata);
#endif
-void omap_usb_init(struct omap_usb_config *pdata);
+
+/*
+ * FIXME correct answer depends on hmc_mode,
+ * as does (on omap1) any nonzero value for config->otg port number
+ */
+#ifdef CONFIG_USB_GADGET_OMAP
+#define is_usb0_device(config) 1
+#else
+#define is_usb0_device(config) 0
+#endif
+
+void omap_otg_init(struct omap_usb_config *config);
+
+#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)
+void omap1_usb_init(struct omap_usb_config *pdata);
+#else
+static inline void omap1_usb_init(struct omap_usb_config *pdata)
+{
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE)
+void omap2_usbfs_init(struct omap_usb_config *pdata);
+#else
+static inline omap2_usbfs_init(struct omap_usb_config *pdata)
+{
+}
+#endif
/*-------------------------------------------------------------------------*/
@@ -192,4 +219,24 @@ void omap_usb_init(struct omap_usb_config *pdata);
# define USB0PUENACTLOI (1 << 16)
# define USBSTANDBYCTRL (1 << 15)
+#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB)
+u32 omap1_usb0_init(unsigned nwires, unsigned is_device);
+u32 omap1_usb1_init(unsigned nwires);
+u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup);
+#else
+static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device)
+{
+ return 0;
+}
+static inline u32 omap1_usb1_init(unsigned nwires)
+{
+ return 0;
+
+}
+static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
+{
+ return 0;
+}
+#endif
+
#endif /* __ASM_ARCH_OMAP_USB_H */
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-29 07:36:36 +0300