diff options
Diffstat (limited to 'arch/arm/mm/proc-arm6_7.S')
| -rw-r--r-- | arch/arm/mm/proc-arm6_7.S | 404 |
1 files changed, 404 insertions, 0 deletions
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S new file mode 100644 index 000000000000..0ee214b824ff --- /dev/null +++ b/arch/arm/mm/proc-arm6_7.S @@ -0,0 +1,404 @@ +/* + * linux/arch/arm/mm/proc-arm6,7.S + * + * Copyright (C) 1997-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * These are the low level assembler for performing cache and TLB + * functions on the ARM610 & ARM710. + */ +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/assembler.h> +#include <asm/constants.h> +#include <asm/pgtable.h> +#include <asm/procinfo.h> +#include <asm/ptrace.h> + +ENTRY(cpu_arm6_dcache_clean_area) +ENTRY(cpu_arm7_dcache_clean_area) + mov pc, lr + +/* + * Function: arm6_7_data_abort () + * + * Params : r2 = address of aborted instruction + * : sp = pointer to registers + * + * Purpose : obtain information about current aborted instruction + * + * Returns : r0 = address of abort + * : r1 = FSR + */ + +ENTRY(cpu_arm7_data_abort) + mrc p15, 0, r1, c5, c0, 0 @ get FSR + mrc p15, 0, r0, c6, c0, 0 @ get FAR + ldr r8, [r0] @ read arm instruction + tst r8, #1 << 20 @ L = 1 -> write? + orreq r1, r1, #1 << 8 @ yes. + and r7, r8, #15 << 24 + add pc, pc, r7, lsr #22 @ Now branch to the relevant processing routine + nop + +/* 0 */ b .data_unknown +/* 1 */ mov pc, lr @ swp +/* 2 */ b .data_unknown +/* 3 */ b .data_unknown +/* 4 */ b .data_arm_lateldrpostconst @ ldr rd, [rn], #m +/* 5 */ b .data_arm_lateldrpreconst @ ldr rd, [rn, #m] +/* 6 */ b .data_arm_lateldrpostreg @ ldr rd, [rn], rm +/* 7 */ b .data_arm_lateldrprereg @ ldr rd, [rn, rm] +/* 8 */ b .data_arm_ldmstm @ ldm*a rn, <rlist> +/* 9 */ b .data_arm_ldmstm @ ldm*b rn, <rlist> +/* a */ b .data_unknown +/* b */ b .data_unknown +/* c */ mov pc, lr @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m +/* d */ mov pc, lr @ ldc rd, [rn, #m] +/* e */ b .data_unknown +/* f */ +.data_unknown: @ Part of jumptable + mov r0, r2 + mov r1, r8 + mov r2, sp + bl baddataabort + b ret_from_exception + +ENTRY(cpu_arm6_data_abort) + mrc p15, 0, r1, c5, c0, 0 @ get FSR + mrc p15, 0, r0, c6, c0, 0 @ get FAR + ldr r8, [r2] @ read arm instruction + tst r8, #1 << 20 @ L = 1 -> write? + orreq r1, r1, #1 << 8 @ yes. + and r7, r8, #14 << 24 + teq r7, #8 << 24 @ was it ldm/stm + movne pc, lr + +.data_arm_ldmstm: + tst r8, #1 << 21 @ check writeback bit + moveq pc, lr @ no writeback -> no fixup + mov r7, #0x11 + orr r7, r7, #0x1100 + and r6, r8, r7 + and r2, r8, r7, lsl #1 + add r6, r6, r2, lsr #1 + and r2, r8, r7, lsl #2 + add r6, r6, r2, lsr #2 + and r2, r8, r7, lsl #3 + add r6, r6, r2, lsr #3 + add r6, r6, r6, lsr #8 + add r6, r6, r6, lsr #4 + and r6, r6, #15 @ r6 = no. of registers to transfer. + and r5, r8, #15 << 16 @ Extract 'n' from instruction + ldr r7, [sp, r5, lsr #14] @ Get register 'Rn' + tst r8, #1 << 23 @ Check U bit + subne r7, r7, r6, lsl #2 @ Undo increment + addeq r7, r7, r6, lsl #2 @ Undo decrement + str r7, [sp, r5, lsr #14] @ Put register 'Rn' + mov pc, lr + +.data_arm_apply_r6_and_rn: + and r5, r8, #15 << 16 @ Extract 'n' from instruction + ldr r7, [sp, r5, lsr #14] @ Get register 'Rn' + tst r8, #1 << 23 @ Check U bit + subne r7, r7, r6 @ Undo incrmenet + addeq r7, r7, r6 @ Undo decrement + str r7, [sp, r5, lsr #14] @ Put register 'Rn' + mov pc, lr + +.data_arm_lateldrpreconst: + tst r8, #1 << 21 @ check writeback bit + moveq pc, lr @ no writeback -> no fixup +.data_arm_lateldrpostconst: + movs r2, r8, lsl #20 @ Get offset + moveq pc, lr @ zero -> no fixup + and r5, r8, #15 << 16 @ Extract 'n' from instruction + ldr r7, [sp, r5, lsr #14] @ Get register 'Rn' + tst r8, #1 << 23 @ Check U bit + subne r7, r7, r2, lsr #20 @ Undo increment + addeq r7, r7, r2, lsr #20 @ Undo decrement + str r7, [sp, r5, lsr #14] @ Put register 'Rn' + mov pc, lr + +.data_arm_lateldrprereg: + tst r8, #1 << 21 @ check writeback bit + moveq pc, lr @ no writeback -> no fixup +.data_arm_lateldrpostreg: + and r7, r8, #15 @ Extract 'm' from instruction + ldr r6, [sp, r7, lsl #2] @ Get register 'Rm' + mov r5, r8, lsr #7 @ get shift count + ands r5, r5, #31 + and r7, r8, #0x70 @ get shift type + orreq r7, r7, #8 @ shift count = 0 + add pc, pc, r7 + nop + + mov r6, r6, lsl r5 @ 0: LSL #!0 + b .data_arm_apply_r6_and_rn + b .data_arm_apply_r6_and_rn @ 1: LSL #0 + nop + b .data_unknown @ 2: MUL? + nop + b .data_unknown @ 3: MUL? + nop + mov r6, r6, lsr r5 @ 4: LSR #!0 + b .data_arm_apply_r6_and_rn + mov r6, r6, lsr #32 @ 5: LSR #32 + b .data_arm_apply_r6_and_rn + b .data_unknown @ 6: MUL? + nop + b .data_unknown @ 7: MUL? + nop + mov r6, r6, asr r5 @ 8: ASR #!0 + b .data_arm_apply_r6_and_rn + mov r6, r6, asr #32 @ 9: ASR #32 + b .data_arm_apply_r6_and_rn + b .data_unknown @ A: MUL? + nop + b .data_unknown @ B: MUL? + nop + mov r6, r6, ror r5 @ C: ROR #!0 + b .data_arm_apply_r6_and_rn + mov r6, r6, rrx @ D: RRX + b .data_arm_apply_r6_and_rn + b .data_unknown @ E: MUL? + nop + b .data_unknown @ F: MUL? + +/* + * Function: arm6_7_proc_init (void) + * : arm6_7_proc_fin (void) + * + * Notes : This processor does not require these + */ +ENTRY(cpu_arm6_proc_init) +ENTRY(cpu_arm7_proc_init) + mov pc, lr + +ENTRY(cpu_arm6_proc_fin) +ENTRY(cpu_arm7_proc_fin) + mov r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE + msr cpsr_c, r0 + mov r0, #0x31 @ ....S..DP...M + mcr p15, 0, r0, c1, c0, 0 @ disable caches + mov pc, lr + +ENTRY(cpu_arm6_do_idle) +ENTRY(cpu_arm7_do_idle) + mov pc, lr + +/* + * Function: arm6_7_switch_mm(unsigned long pgd_phys) + * Params : pgd_phys Physical address of page table + * Purpose : Perform a task switch, saving the old processes state, and restoring + * the new. + */ +ENTRY(cpu_arm6_switch_mm) +ENTRY(cpu_arm7_switch_mm) + mov r1, #0 + mcr p15, 0, r1, c7, c0, 0 @ flush cache + mcr p15, 0, r0, c2, c0, 0 @ update page table ptr + mcr p15, 0, r1, c5, c0, 0 @ flush TLBs + mov pc, lr + +/* + * Function: arm6_7_set_pte(pte_t *ptep, pte_t pte) + * Params : r0 = Address to set + * : r1 = value to set + * Purpose : Set a PTE and flush it out of any WB cache + */ + .align 5 +ENTRY(cpu_arm6_set_pte) +ENTRY(cpu_arm7_set_pte) + str r1, [r0], #-2048 @ linux version + + eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY + + bic r2, r1, #PTE_SMALL_AP_MASK + bic r2, r2, #PTE_TYPE_MASK + orr r2, r2, #PTE_TYPE_SMALL + + tst r1, #L_PTE_USER @ User? + orrne r2, r2, #PTE_SMALL_AP_URO_SRW + + tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty? + orreq r2, r2, #PTE_SMALL_AP_UNO_SRW + + tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young + movne r2, #0 + + str r2, [r0] @ hardware version + mov pc, lr + +/* + * Function: _arm6_7_reset + * Params : r0 = address to jump to + * Notes : This sets up everything for a reset + */ +ENTRY(cpu_arm6_reset) +ENTRY(cpu_arm7_reset) + mov r1, #0 + mcr p15, 0, r1, c7, c0, 0 @ flush cache + mcr p15, 0, r1, c5, c0, 0 @ flush TLB + mov r1, #0x30 + mcr p15, 0, r1, c1, c0, 0 @ turn off MMU etc + mov pc, r0 + + __INIT + + .type __arm6_setup, #function +__arm6_setup: mov r0, #0 + mcr p15, 0, r0, c7, c0 @ flush caches on v3 + mcr p15, 0, r0, c5, c0 @ flush TLBs on v3 + mov r0, #0x3d @ . ..RS BLDP WCAM + orr r0, r0, #0x100 @ . ..01 0011 1101 + mov pc, lr + .size __arm6_setup, . - __arm6_setup + + .type __arm7_setup, #function +__arm7_setup: mov r0, #0 + mcr p15, 0, r0, c7, c0 @ flush caches on v3 + mcr p15, 0, r0, c5, c0 @ flush TLBs on v3 + mcr p15, 0, r0, c3, c0 @ load domain access register + mov r0, #0x7d @ . ..RS BLDP WCAM + orr r0, r0, #0x100 @ . ..01 0111 1101 + mov pc, lr + .size __arm7_setup, . - __arm7_setup + + __INITDATA + +/* + * Purpose : Function pointers used to access above functions - all calls + * come through these + */ + .type arm6_processor_functions, #object +ENTRY(arm6_processor_functions) + .word cpu_arm6_data_abort + .word cpu_arm6_proc_init + .word cpu_arm6_proc_fin + .word cpu_arm6_reset + .word cpu_arm6_do_idle + .word cpu_arm6_dcache_clean_area + .word cpu_arm6_switch_mm + .word cpu_arm6_set_pte + .size arm6_processor_functions, . - arm6_processor_functions + +/* + * Purpose : Function pointers used to access above functions - all calls + * come through these + */ + .type arm7_processor_functions, #object +ENTRY(arm7_processor_functions) + .word cpu_arm7_data_abort + .word cpu_arm7_proc_init + .word cpu_arm7_proc_fin + .word cpu_arm7_reset + .word cpu_arm7_do_idle + .word cpu_arm7_dcache_clean_area + .word cpu_arm7_switch_mm + .word cpu_arm7_set_pte + .size arm7_processor_functions, . - arm7_processor_functions + + .section ".rodata" + + .type cpu_arch_name, #object +cpu_arch_name: .asciz "armv3" + .size cpu_arch_name, . - cpu_arch_name + + .type cpu_elf_name, #object +cpu_elf_name: .asciz "v3" + .size cpu_elf_name, . - cpu_elf_name + + .type cpu_arm6_name, #object +cpu_arm6_name: .asciz "ARM6" + .size cpu_arm6_name, . - cpu_arm6_name + + .type cpu_arm610_name, #object +cpu_arm610_name: + .asciz "ARM610" + .size cpu_arm610_name, . - cpu_arm610_name + + .type cpu_arm7_name, #object +cpu_arm7_name: .asciz "ARM7" + .size cpu_arm7_name, . - cpu_arm7_name + + .type cpu_arm710_name, #object +cpu_arm710_name: + .asciz "ARM710" + .size cpu_arm710_name, . - cpu_arm710_name + + .align + + .section ".proc.info", #alloc, #execinstr + + .type __arm6_proc_info, #object +__arm6_proc_info: + .long 0x41560600 + .long 0xfffffff0 + .long 0x00000c1e + b __arm6_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_26BIT + .long cpu_arm6_name + .long arm6_processor_functions + .long v3_tlb_fns + .long v3_user_fns + .long v3_cache_fns + .size __arm6_proc_info, . - __arm6_proc_info + + .type __arm610_proc_info, #object +__arm610_proc_info: + .long 0x41560610 + .long 0xfffffff0 + .long 0x00000c1e + b __arm6_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_26BIT + .long cpu_arm610_name + .long arm6_processor_functions + .long v3_tlb_fns + .long v3_user_fns + .long v3_cache_fns + .size __arm610_proc_info, . - __arm610_proc_info + + .type __arm7_proc_info, #object +__arm7_proc_info: + .long 0x41007000 + .long 0xffffff00 + .long 0x00000c1e + b __arm7_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_26BIT + .long cpu_arm7_name + .long arm7_processor_functions + .long v3_tlb_fns + .long v3_user_fns + .long v3_cache_fns + .size __arm7_proc_info, . - __arm7_proc_info + + .type __arm710_proc_info, #object +__arm710_proc_info: + .long 0x41007100 + .long 0xfff8ff00 + .long PMD_TYPE_SECT | \ + PMD_SECT_BUFFERABLE | \ + PMD_SECT_CACHEABLE | \ + PMD_BIT4 | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + b __arm7_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP | HWCAP_26BIT + .long cpu_arm710_name + .long arm7_processor_functions + .long v3_tlb_fns + .long v3_user_fns + .long v3_cache_fns + .size __arm710_proc_info, . - __arm710_proc_info |