diff options
Diffstat (limited to 'arch/arm/mach-ux500/include')
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/db5500-regs.h | 20 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/db8500-regs.h | 37 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/hardware.h | 1 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/id.h | 20 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/irqs-board-mop500.h | 5 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/irqs-board-u5500.h | 21 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/irqs-db5500.h | 27 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/irqs-db8500.h | 54 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/irqs.h | 46 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/prcmu-defs.h | 30 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/prcmu-regs.h | 96 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/prcmu.h | 28 |
12 files changed, 198 insertions, 187 deletions
diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h index bd88c1e74060..6ad983294103 100644 --- a/arch/arm/mach-ux500/include/mach/db5500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h @@ -17,6 +17,8 @@ #define U5500_GIC_DIST_BASE 0xA0411000 #define U5500_GIC_CPU_BASE 0xA0410100 #define U5500_DMA_BASE 0x90030000 +#define U5500_STM_BASE 0x90020000 +#define U5500_STM_REG_BASE (U5500_STM_BASE + 0xF000) #define U5500_MCDE_BASE 0xA0400000 #define U5500_MODEM_BASE 0xB0000000 #define U5500_L2CC_BASE 0xA0412000 @@ -29,7 +31,9 @@ #define U5500_NAND0_BASE 0x60000000 #define U5500_NAND1_BASE 0x70000000 #define U5500_TWD_BASE 0xa0410600 +#define U5500_ICN_BASE 0xA0040000 #define U5500_B2R2_BASE 0xa0200000 +#define U5500_BOOT_ROM_BASE 0x90000000 #define U5500_FSMC_BASE (U5500_PER1_BASE + 0x0000) #define U5500_SDI0_BASE (U5500_PER1_BASE + 0x1000) @@ -60,6 +64,7 @@ #define U5500_MSP1_BASE (U5500_PER4_BASE + 0x9000) #define U5500_GPIO2_BASE (U5500_PER4_BASE + 0xA000) #define U5500_CDETECT_BASE (U5500_PER4_BASE + 0xF000) +#define U5500_PRCMU_TCDM_BASE (U5500_PER4_BASE + 0x18000) #define U5500_SPI0_BASE (U5500_PER5_BASE + 0x0000) #define U5500_SPI1_BASE (U5500_PER5_BASE + 0x1000) @@ -83,7 +88,7 @@ #define U5500_HASH0_BASE (U5500_PER6_BASE + 0x1000) #define U5500_HASH1_BASE (U5500_PER6_BASE + 0x2000) #define U5500_PKA_BASE (U5500_PER6_BASE + 0x4000) -#define U5500_PKAM_BASE (U5500_PER6_BASE + 0x5000) +#define U5500_PKAM_BASE (U5500_PER6_BASE + 0x5100) #define U5500_MTU0_BASE (U5500_PER6_BASE + 0x6000) #define U5500_MTU1_BASE (U5500_PER6_BASE + 0x7000) #define U5500_CR_BASE (U5500_PER6_BASE + 0x8000) @@ -114,8 +119,19 @@ #define U5500_MBOX2_LOCAL_START (U5500_MBOX_BASE + 0x20) #define U5500_MBOX2_LOCAL_END (U5500_MBOX_BASE + 0x3F) -#define U5500_ESRAM_BASE 0x40000000 +#define U5500_ACCCON_BASE_SEC (0xBFFF0000) +#define U5500_ACCCON_BASE (0xBFFF1000) +#define U5500_ACCCON_CPUVEC_RESET_ADDR_OFFSET (0x00000020) +#define U5500_ACCCON_ACC_CPU_CTRL_OFFSET (0x000000BC) + +#define U5500_ESRAM_BASE 0x40000000 #define U5500_ESRAM_DMA_LCPA_OFFSET 0x10000 #define U5500_DMA_LCPA_BASE (U5500_ESRAM_BASE + U5500_ESRAM_DMA_LCPA_OFFSET) +#define U5500_MCDE_SIZE 0x1000 +#define U5500_DSI_LINK_SIZE 0x1000 +#define U5500_DSI_LINK_COUNT 0x2 +#define U5500_DSI_LINK1_BASE (U5500_MCDE_BASE + U5500_MCDE_SIZE) +#define U5500_DSI_LINK2_BASE (U5500_DSI_LINK1_BASE + U5500_DSI_LINK_SIZE) + #endif diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h index 16647b255378..049997109cf9 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -15,8 +15,13 @@ #define U8500_ESRAM_BANK2 (U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE) #define U8500_ESRAM_BANK3 (U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE) #define U8500_ESRAM_BANK4 (U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE) -/* Use bank 4 for DMA LCPA */ -#define U8500_DMA_LCPA_BASE U8500_ESRAM_BANK4 +/* + * on V1 DMA uses 4KB for logical parameters position is right after the 64KB + * reserved for security + */ +#define U8500_ESRAM_DMA_LCPA_OFFSET 0x10000 + +#define U8500_DMA_LCPA_BASE (U8500_ESRAM_BANK0 + U8500_ESRAM_DMA_LCPA_OFFSET) #define U8500_DMA_LCPA_BASE_ED (U8500_ESRAM_BANK4 + 0x4000) #define U8500_PER3_BASE 0x80000000 @@ -27,9 +32,12 @@ #define U8500_B2R2_BASE 0x80130000 #define U8500_HSEM_BASE 0x80140000 #define U8500_PER4_BASE 0x80150000 +#define U8500_TPIU_BASE 0x80190000 #define U8500_ICN_BASE 0x81000000 #define U8500_BOOT_ROM_BASE 0x90000000 +/* ASIC ID is at 0xbf4 offset within this region */ +#define U8500_ASIC_ID_BASE 0x9001D000 #define U8500_PER6_BASE 0xa03c0000 #define U8500_PER5_BASE 0xa03e0000 @@ -70,13 +78,15 @@ /* per6 base addresses */ #define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000) -#define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000) -#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000) +#define U8500_HASH0_BASE (U8500_PER6_BASE + 0x1000) +#define U8500_HASH1_BASE (U8500_PER6_BASE + 0x2000) +#define U8500_PKA_BASE (U8500_PER6_BASE + 0x4000) +#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x5100) #define U8500_MTU0_BASE (U8500_PER6_BASE + 0x6000) /* v1 */ #define U8500_MTU1_BASE (U8500_PER6_BASE + 0x7000) /* v1 */ #define U8500_CR_BASE (U8500_PER6_BASE + 0x8000) /* v1 */ -#define U8500_CRYPTO0_BASE (U8500_PER6_BASE + 0xa000) -#define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000) +#define U8500_CRYP0_BASE (U8500_PER6_BASE + 0xa000) +#define U8500_CRYP1_BASE (U8500_PER6_BASE + 0xb000) #define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000) /* per5 base addresses */ @@ -93,7 +103,8 @@ #define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000) #define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) #define U8500_PRCMU_TCDM_BASE_V1 (U8500_PER4_BASE + 0x0f000) -#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) +#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) +#define U8500_PRCMU_TCPM_BASE (U8500_PER4_BASE + 0x60000) /* per3 base addresses */ #define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000) @@ -124,6 +135,7 @@ #define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000) #define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000) #define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000) +#define U8500_MSP3_BASE (U8500_PER1_BASE + 0x5000) #define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000) #define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000) #define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000) @@ -143,4 +155,15 @@ #define U8500_GPIOBANK7_BASE (U8500_GPIO2_BASE + 0x80) #define U8500_GPIOBANK8_BASE U8500_GPIO3_BASE +#define U8500_MCDE_SIZE 0x1000 +#define U8500_DSI_LINK_SIZE 0x1000 +#define U8500_DSI_LINK1_BASE (U8500_MCDE_BASE + U8500_MCDE_SIZE) +#define U8500_DSI_LINK2_BASE (U8500_DSI_LINK1_BASE + U8500_DSI_LINK_SIZE) +#define U8500_DSI_LINK3_BASE (U8500_DSI_LINK2_BASE + U8500_DSI_LINK_SIZE) +#define U8500_DSI_LINK_COUNT 0x3 + +/* Modem and APE physical addresses */ +#define U8500_MODEM_BASE 0xe000000 +#define U8500_APE_BASE 0x6000000 + #endif diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index bf63f2631ba0..2c6f71049f2e 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -35,6 +35,7 @@ #ifndef __ASSEMBLY__ #include <mach/id.h> +extern void __iomem *_PRCMU_BASE; #define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/include/mach/id.h index f1288d10b6ab..02b541a37ee5 100644 --- a/arch/arm/mach-ux500/include/mach/id.h +++ b/arch/arm/mach-ux500/include/mach/id.h @@ -75,6 +75,26 @@ static inline bool __attribute_const__ cpu_is_u8500v2(void) return cpu_is_u8500() && ((dbx500_revision() & 0xf0) == 0xB0); } +static inline bool cpu_is_u8500v20(void) +{ + return cpu_is_u8500() && (dbx500_revision() == 0xB0); +} + +static inline bool cpu_is_u8500v21(void) +{ + return cpu_is_u8500() && (dbx500_revision() == 0xB1); +} + +static inline bool cpu_is_u8500v20_or_later(void) +{ + return cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11(); +} + +static inline bool ux500_is_svp(void) +{ + return false; +} + #define ux500_unknown_soc() BUG() #endif diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h index 97ef55f84934..47969909836c 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h @@ -50,6 +50,11 @@ #define MOP500_IRQ_END MOP500_NR_IRQS +/* + * We may have several boards, but only one will run at a + * time, so the one with most IRQs will bump this ahead, + * but the IRQ_BOARD_START remains the same for either board. + */ #if MOP500_IRQ_END > IRQ_BOARD_END #undef IRQ_BOARD_END #define IRQ_BOARD_END MOP500_IRQ_END diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h b/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h new file mode 100644 index 000000000000..29d972c7717b --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h @@ -0,0 +1,21 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __MACH_IRQS_BOARD_U5500_H +#define __MACH_IRQS_BOARD_U5500_H + +#define AB5500_NR_IRQS 5 +#define IRQ_AB5500_BASE IRQ_BOARD_START +#define IRQ_AB5500_END (IRQ_AB5500_BASE + AB5500_NR_IRQS) + +#define U5500_IRQ_END IRQ_AB5500_END + +#if IRQ_BOARD_END < U5500_IRQ_END +#undef IRQ_BOARD_END +#define IRQ_BOARD_END U5500_IRQ_END +#endif + +#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h index bfa123dbec3b..77239776a6f2 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-db5500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-db5500.h @@ -83,4 +83,31 @@ #define IRQ_DB5500_GPIO6 (IRQ_SHPI_START + 125) #define IRQ_DB5500_GPIO7 (IRQ_SHPI_START + 126) +#ifdef CONFIG_UX500_SOC_DB5500 + +/* + * After the GPIO ones we reserve a range of IRQ:s in which virtual + * IRQ:s representing modem IRQ:s can be allocated + */ +#define IRQ_MODEM_EVENTS_BASE IRQ_SOC_START +#define IRQ_MODEM_EVENTS_NBR 72 +#define IRQ_MODEM_EVENTS_END (IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR) + +/* List of virtual IRQ:s that are allocated from the range above */ +#define MBOX_PAIR0_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 43) +#define MBOX_PAIR1_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 45) +#define MBOX_PAIR2_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 41) + +/* + * We may have several SoCs, but only one will run at a + * time, so the one with most IRQs will bump this ahead, + * but the IRQ_SOC_START remains the same for either SoC. + */ +#if IRQ_SOC_END < IRQ_MODEM_EVENTS_END +#undef IRQ_SOC_END +#define IRQ_SOC_END IRQ_MODEM_EVENTS_END +#endif + +#endif /* CONFIG_UX500_SOC_DB5500 */ + #endif diff --git a/arch/arm/mach-ux500/include/mach/irqs-db8500.h b/arch/arm/mach-ux500/include/mach/irqs-db8500.h index 8b5d9f0a1633..68bc14974608 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-db8500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-db8500.h @@ -93,4 +93,58 @@ #define IRQ_DB8500_GPIO7 (IRQ_SHPI_START + 126) #define IRQ_DB8500_GPIO8 (IRQ_SHPI_START + 127) +#define IRQ_CA_WAKE_REQ_ED (IRQ_SHPI_START + 71) +#define IRQ_AC_READ_NOTIFICATION_0_ED (IRQ_SHPI_START + 66) +#define IRQ_AC_READ_NOTIFICATION_1_ED (IRQ_SHPI_START + 64) +#define IRQ_CA_MSG_PEND_NOTIFICATION_0_ED (IRQ_SHPI_START + 67) +#define IRQ_CA_MSG_PEND_NOTIFICATION_1_ED (IRQ_SHPI_START + 65) + +#define IRQ_CA_WAKE_REQ_V1 (IRQ_SHPI_START + 83) +#define IRQ_AC_READ_NOTIFICATION_0_V1 (IRQ_SHPI_START + 78) +#define IRQ_AC_READ_NOTIFICATION_1_V1 (IRQ_SHPI_START + 76) +#define IRQ_CA_MSG_PEND_NOTIFICATION_0_V1 (IRQ_SHPI_START + 79) +#define IRQ_CA_MSG_PEND_NOTIFICATION_1_V1 (IRQ_SHPI_START + 77) + +#ifdef CONFIG_UX500_SOC_DB8500 + +/* Virtual interrupts corresponding to the PRCMU wakeups. */ +#define IRQ_PRCMU_BASE IRQ_SOC_START +#define NUM_PRCMU_WAKEUPS (IRQ_PRCMU_END - IRQ_PRCMU_BASE) + +#define IRQ_PRCMU_RTC (IRQ_PRCMU_BASE) +#define IRQ_PRCMU_RTT0 (IRQ_PRCMU_BASE + 1) +#define IRQ_PRCMU_RTT1 (IRQ_PRCMU_BASE + 2) +#define IRQ_PRCMU_HSI0 (IRQ_PRCMU_BASE + 3) +#define IRQ_PRCMU_HSI1 (IRQ_PRCMU_BASE + 4) +#define IRQ_PRCMU_CA_WAKE (IRQ_PRCMU_BASE + 5) +#define IRQ_PRCMU_USB (IRQ_PRCMU_BASE + 6) +#define IRQ_PRCMU_ABB (IRQ_PRCMU_BASE + 7) +#define IRQ_PRCMU_ABB_FIFO (IRQ_PRCMU_BASE + 8) +#define IRQ_PRCMU_ARM (IRQ_PRCMU_BASE + 9) +#define IRQ_PRCMU_MODEM_SW_RESET_REQ (IRQ_PRCMU_BASE + 10) +#define IRQ_PRCMU_GPIO0 (IRQ_PRCMU_BASE + 11) +#define IRQ_PRCMU_GPIO1 (IRQ_PRCMU_BASE + 12) +#define IRQ_PRCMU_GPIO2 (IRQ_PRCMU_BASE + 13) +#define IRQ_PRCMU_GPIO3 (IRQ_PRCMU_BASE + 14) +#define IRQ_PRCMU_GPIO4 (IRQ_PRCMU_BASE + 15) +#define IRQ_PRCMU_GPIO5 (IRQ_PRCMU_BASE + 16) +#define IRQ_PRCMU_GPIO6 (IRQ_PRCMU_BASE + 17) +#define IRQ_PRCMU_GPIO7 (IRQ_PRCMU_BASE + 18) +#define IRQ_PRCMU_GPIO8 (IRQ_PRCMU_BASE + 19) +#define IRQ_PRCMU_CA_SLEEP (IRQ_PRCMU_BASE + 20) +#define IRQ_PRCMU_HOTMON_LOW (IRQ_PRCMU_BASE + 21) +#define IRQ_PRCMU_HOTMON_HIGH (IRQ_PRCMU_BASE + 22) +#define IRQ_PRCMU_END (IRQ_PRCMU_BASE + 23) + +/* + * We may have several SoCs, but only one will run at a + * time, so the one with most IRQs will bump this ahead, + * but the IRQ_SOC_START remains the same for either SoC. + */ +#if IRQ_SOC_END < IRQ_PRCMU_END +#undef IRQ_SOC_END +#define IRQ_SOC_END IRQ_PRCMU_END +#endif + +#endif /* CONFIG_UX500_SOC_DB8500 */ #endif diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index ba1294c13c4d..9db68d264c5f 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -10,49 +10,47 @@ #ifndef ASM_ARCH_IRQS_H #define ASM_ARCH_IRQS_H -#include <mach/irqs-db5500.h> -#include <mach/irqs-db8500.h> +#include <mach/hardware.h> -#define IRQ_LOCALTIMER 29 -#define IRQ_LOCALWDOG 30 +#define IRQ_LOCALTIMER 29 +#define IRQ_LOCALWDOG 30 /* Shared Peripheral Interrupt (SHPI) */ #define IRQ_SHPI_START 32 -/* Interrupt numbers generic for shared peripheral */ +/* + * MTU0 preserved for now until plat-nomadik is taught not to use it. Don't + * add any other IRQs here, use the irqs-dbx500.h files. + */ #define IRQ_MTU0 (IRQ_SHPI_START + 4) -/* There are 128 shared peripheral interrupts assigned to - * INTID[160:32]. The first 32 interrupts are reserved. - */ -#define DBX500_NR_INTERNAL_IRQS 161 +#define DBX500_NR_INTERNAL_IRQS 160 /* After chip-specific IRQ numbers we have the GPIO ones */ #define NOMADIK_NR_GPIO 288 #define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + DBX500_NR_INTERNAL_IRQS) #define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - DBX500_NR_INTERNAL_IRQS) -#define IRQ_BOARD_START NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) +#define IRQ_GPIO_END NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) + +#define IRQ_SOC_START IRQ_GPIO_END +/* This will be overridden by SoC-specific irq headers */ +#define IRQ_SOC_END IRQ_SOC_START +#include <mach/irqs-db5500.h> +#include <mach/irqs-db8500.h> + +#define IRQ_BOARD_START IRQ_SOC_END /* This will be overridden by board-specific irq headers */ -#define IRQ_BOARD_END IRQ_BOARD_START +#define IRQ_BOARD_END IRQ_BOARD_START #ifdef CONFIG_MACH_U8500 #include <mach/irqs-board-mop500.h> #endif -/* - * After the board specific IRQ:s we reserve a range of IRQ:s in which virtual - * IRQ:s representing modem IRQ:s can be allocated - */ -#define IRQ_MODEM_EVENTS_BASE (IRQ_BOARD_END + 1) -#define IRQ_MODEM_EVENTS_NBR 72 -#define IRQ_MODEM_EVENTS_END (IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR) - -/* List of virtual IRQ:s that are allocated from the range above */ -#define MBOX_PAIR0_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 43) -#define MBOX_PAIR1_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 45) -#define MBOX_PAIR2_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 41) +#ifdef CONFIG_MACH_U5500 +#include <mach/irqs-board-u5500.h> +#endif -#define NR_IRQS IRQ_MODEM_EVENTS_END +#define NR_IRQS IRQ_BOARD_END #endif /* ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-ux500/include/mach/prcmu-defs.h b/arch/arm/mach-ux500/include/mach/prcmu-defs.h deleted file mode 100644 index 848ba64b561f..000000000000 --- a/arch/arm/mach-ux500/include/mach/prcmu-defs.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright (C) STMicroelectronics 2009 - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Sundar Iyer <sundar.iyer@stericsson.com> - * Author: Martin Persson <martin.persson@stericsson.com> - * - * License Terms: GNU General Public License v2 - * - * PRCM Unit definitions - */ - -#ifndef __MACH_PRCMU_DEFS_H -#define __MACH_PRCMU_DEFS_H - -enum prcmu_cpu_opp { - CPU_OPP_INIT = 0x00, - CPU_OPP_NO_CHANGE = 0x01, - CPU_OPP_100 = 0x02, - CPU_OPP_50 = 0x03, - CPU_OPP_MAX = 0x04, - CPU_OPP_EXT_CLK = 0x07 -}; -enum prcmu_ape_opp { - APE_OPP_NO_CHANGE = 0x00, - APE_OPP_100 = 0x02, - APE_OPP_50 = 0x03, -}; - -#endif /* __MACH_PRCMU_DEFS_H */ diff --git a/arch/arm/mach-ux500/include/mach/prcmu-regs.h b/arch/arm/mach-ux500/include/mach/prcmu-regs.h deleted file mode 100644 index 455467e88791..000000000000 --- a/arch/arm/mach-ux500/include/mach/prcmu-regs.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * Copyright (C) STMicroelectronics 2009 - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com> - * Author: Sundar Iyer <sundar.iyer@stericsson.com> - * - * License Terms: GNU General Public License v2 - * - * PRCM Unit registers - */ - -#ifndef __MACH_PRCMU_REGS_H -#define __MACH_PRCMU_REGS_H - -#include <mach/hardware.h> - -#define _PRCMU_BASE IO_ADDRESS(U8500_PRCMU_BASE) - -#define PRCM_ARM_PLLDIVPS (_PRCMU_BASE + 0x118) -#define PRCM_ARM_CHGCLKREQ (_PRCMU_BASE + 0x114) -#define PRCM_PLLARM_ENABLE (_PRCMU_BASE + 0x98) -#define PRCM_ARMCLKFIX_MGT (_PRCMU_BASE + 0x0) -#define PRCM_A9_RESETN_CLR (_PRCMU_BASE + 0x1f4) -#define PRCM_A9_RESETN_SET (_PRCMU_BASE + 0x1f0) -#define PRCM_ARM_LS_CLAMP (_PRCMU_BASE + 0x30c) -#define PRCM_SRAM_A9 (_PRCMU_BASE + 0x308) - -/* ARM WFI Standby signal register */ -#define PRCM_ARM_WFI_STANDBY (_PRCMU_BASE + 0x130) -#define PRCMU_IOCR (_PRCMU_BASE + 0x310) - -/* CPU mailbox registers */ -#define PRCM_MBOX_CPU_VAL (_PRCMU_BASE + 0x0fc) -#define PRCM_MBOX_CPU_SET (_PRCMU_BASE + 0x100) -#define PRCM_MBOX_CPU_CLR (_PRCMU_BASE + 0x104) - -/* Dual A9 core interrupt management unit registers */ -#define PRCM_A9_MASK_REQ (_PRCMU_BASE + 0x328) -#define PRCM_A9_MASK_ACK (_PRCMU_BASE + 0x32c) -#define PRCM_ARMITMSK31TO0 (_PRCMU_BASE + 0x11c) -#define PRCM_ARMITMSK63TO32 (_PRCMU_BASE + 0x120) -#define PRCM_ARMITMSK95TO64 (_PRCMU_BASE + 0x124) -#define PRCM_ARMITMSK127TO96 (_PRCMU_BASE + 0x128) -#define PRCM_POWER_STATE_VAL (_PRCMU_BASE + 0x25C) -#define PRCM_ARMITVAL31TO0 (_PRCMU_BASE + 0x260) -#define PRCM_ARMITVAL63TO32 (_PRCMU_BASE + 0x264) -#define PRCM_ARMITVAL95TO64 (_PRCMU_BASE + 0x268) -#define PRCM_ARMITVAL127TO96 (_PRCMU_BASE + 0x26C) - -#define PRCM_HOSTACCESS_REQ (_PRCMU_BASE + 0x334) -#define ARM_WAKEUP_MODEM 0x1 - -#define PRCM_ARM_IT1_CLEAR (_PRCMU_BASE + 0x48C) -#define PRCM_ARM_IT1_VAL (_PRCMU_BASE + 0x494) -#define PRCM_HOLD_EVT (_PRCMU_BASE + 0x174) - -#define PRCM_ITSTATUS0 (_PRCMU_BASE + 0x148) -#define PRCM_ITSTATUS1 (_PRCMU_BASE + 0x150) -#define PRCM_ITSTATUS2 (_PRCMU_BASE + 0x158) -#define PRCM_ITSTATUS3 (_PRCMU_BASE + 0x160) -#define PRCM_ITSTATUS4 (_PRCMU_BASE + 0x168) -#define PRCM_ITSTATUS5 (_PRCMU_BASE + 0x484) -#define PRCM_ITCLEAR5 (_PRCMU_BASE + 0x488) -#define PRCM_ARMIT_MASKXP70_IT (_PRCMU_BASE + 0x1018) - -/* System reset register */ -#define PRCM_APE_SOFTRST (_PRCMU_BASE + 0x228) - -/* Level shifter and clamp control registers */ -#define PRCM_MMIP_LS_CLAMP_SET (_PRCMU_BASE + 0x420) -#define PRCM_MMIP_LS_CLAMP_CLR (_PRCMU_BASE + 0x424) - -/* PRCMU clock/PLL/reset registers */ -#define PRCM_PLLDSI_FREQ (_PRCMU_BASE + 0x500) -#define PRCM_PLLDSI_ENABLE (_PRCMU_BASE + 0x504) -#define PRCM_LCDCLK_MGT (_PRCMU_BASE + 0x044) -#define PRCM_MCDECLK_MGT (_PRCMU_BASE + 0x064) -#define PRCM_HDMICLK_MGT (_PRCMU_BASE + 0x058) -#define PRCM_TVCLK_MGT (_PRCMU_BASE + 0x07c) -#define PRCM_DSI_PLLOUT_SEL (_PRCMU_BASE + 0x530) -#define PRCM_DSITVCLK_DIV (_PRCMU_BASE + 0x52C) -#define PRCM_APE_RESETN_SET (_PRCMU_BASE + 0x1E4) -#define PRCM_APE_RESETN_CLR (_PRCMU_BASE + 0x1E8) - -/* ePOD and memory power signal control registers */ -#define PRCM_EPOD_C_SET (_PRCMU_BASE + 0x410) -#define PRCM_SRAM_LS_SLEEP (_PRCMU_BASE + 0x304) - -/* Debug power control unit registers */ -#define PRCM_POWER_STATE_SET (_PRCMU_BASE + 0x254) - -/* Miscellaneous unit registers */ -#define PRCM_DSI_SW_RESET (_PRCMU_BASE + 0x324) - -#endif /* __MACH_PRCMU_REGS_H */ diff --git a/arch/arm/mach-ux500/include/mach/prcmu.h b/arch/arm/mach-ux500/include/mach/prcmu.h deleted file mode 100644 index c49e456162ef..000000000000 --- a/arch/arm/mach-ux500/include/mach/prcmu.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (C) STMicroelectronics 2009 - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com> - * Author: Sundar Iyer <sundar.iyer@stericsson.com> - * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> - * - * License Terms: GNU General Public License v2 - * - * PRCM Unit f/w API - */ -#ifndef __MACH_PRCMU_H -#define __MACH_PRCMU_H -#include <mach/prcmu-defs.h> - -void __init prcmu_early_init(void); -int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); -int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); -int prcmu_set_ape_opp(enum prcmu_ape_opp opp); -int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp); -int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp, - enum prcmu_cpu_opp cpu_opp); -int prcmu_get_ape_opp(void); -int prcmu_get_cpu_opp(void); -bool prcmu_has_arm_maxopp(void); - -#endif /* __MACH_PRCMU_H */ |