summaryrefslogtreecommitdiff
path: root/arch/arm/mach-tegra
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-tegra')
-rw-r--r--arch/arm/mach-tegra/Kconfig29
-rw-r--r--arch/arm/mach-tegra/include/mach/debug-macro.S225
2 files changed, 0 insertions, 254 deletions
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 97fcd16e2dab..e426d1b7747e 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -57,35 +57,6 @@ config TEGRA_AHB
which controls AHB bus master arbitration and some
perfomance parameters(priority, prefech size).
-choice
- prompt "Low-level debug console UART"
-
-config TEGRA_DEBUG_UART_AUTO_ODMDATA
- bool "Via ODMDATA"
- help
- Automatically determines which UART to use for low-level debug based
- on the ODMDATA value. This value is part of the BCT, and is written
- to the boot memory device using nvflash, or other flashing tool.
- When bits 19:18 are 3, then bits 17:15 indicate which UART to use;
- 0/1/2/3/4 are UART A/B/C/D/E.
-
-config TEGRA_DEBUG_UARTA
- bool "UART-A"
-
-config TEGRA_DEBUG_UARTB
- bool "UART-B"
-
-config TEGRA_DEBUG_UARTC
- bool "UART-C"
-
-config TEGRA_DEBUG_UARTD
- bool "UART-D"
-
-config TEGRA_DEBUG_UARTE
- bool "UART-E"
-
-endchoice
-
config TEGRA_EMC_SCALING_ENABLE
bool "Enable scaling the memory frequency"
diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S
deleted file mode 100644
index f67fd6df0e2f..000000000000
--- a/arch/arm/mach-tegra/include/mach/debug-macro.S
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/debug-macro.S
- *
- * Copyright (C) 2010,2011 Google, Inc.
- * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved.
- *
- * Author:
- * Colin Cross <ccross@google.com>
- * Erik Gilling <konkers@google.com>
- * Doug Anderson <dianders@chromium.org>
- * Stephen Warren <swarren@nvidia.com>
- *
- * Portions based on mach-omap2's debug-macro.S
- * Copyright (C) 1994-1999 Russell King
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/serial_reg.h>
-
-#define UART_SHIFT 2
-
-/* Physical addresses */
-#define TEGRA_CLK_RESET_BASE 0x60006000
-#define TEGRA_APB_MISC_BASE 0x70000000
-#define TEGRA_UARTA_BASE 0x70006000
-#define TEGRA_UARTB_BASE 0x70006040
-#define TEGRA_UARTC_BASE 0x70006200
-#define TEGRA_UARTD_BASE 0x70006300
-#define TEGRA_UARTE_BASE 0x70006400
-#define TEGRA_PMC_BASE 0x7000e400
-
-#define TEGRA_CLK_RST_DEVICES_L (TEGRA_CLK_RESET_BASE + 0x04)
-#define TEGRA_CLK_RST_DEVICES_H (TEGRA_CLK_RESET_BASE + 0x08)
-#define TEGRA_CLK_RST_DEVICES_U (TEGRA_CLK_RESET_BASE + 0x0c)
-#define TEGRA_CLK_OUT_ENB_L (TEGRA_CLK_RESET_BASE + 0x10)
-#define TEGRA_CLK_OUT_ENB_H (TEGRA_CLK_RESET_BASE + 0x14)
-#define TEGRA_CLK_OUT_ENB_U (TEGRA_CLK_RESET_BASE + 0x18)
-#define TEGRA_PMC_SCRATCH20 (TEGRA_PMC_BASE + 0xa0)
-#define TEGRA_APB_MISC_GP_HIDREV (TEGRA_APB_MISC_BASE + 0x804)
-
-/*
- * Must be 1MB-aligned since a 1MB mapping is used early on.
- * Must not overlap with regions in mach-tegra/io.c:tegra_io_desc[].
- */
-#define UART_VIRTUAL_BASE 0xfe100000
-
-#define checkuart(rp, rv, lhu, bit, uart) \
- /* Load address of CLK_RST register */ \
- movw rp, #TEGRA_CLK_RST_DEVICES_##lhu & 0xffff ; \
- movt rp, #TEGRA_CLK_RST_DEVICES_##lhu >> 16 ; \
- /* Load value from CLK_RST register */ \
- ldr rp, [rp, #0] ; \
- /* Test UART's reset bit */ \
- tst rp, #(1 << bit) ; \
- /* If set, can't use UART; jump to save no UART */ \
- bne 90f ; \
- /* Load address of CLK_OUT_ENB register */ \
- movw rp, #TEGRA_CLK_OUT_ENB_##lhu & 0xffff ; \
- movt rp, #TEGRA_CLK_OUT_ENB_##lhu >> 16 ; \
- /* Load value from CLK_OUT_ENB register */ \
- ldr rp, [rp, #0] ; \
- /* Test UART's clock enable bit */ \
- tst rp, #(1 << bit) ; \
- /* If clear, can't use UART; jump to save no UART */ \
- beq 90f ; \
- /* Passed all tests, load address of UART registers */ \
- movw rp, #TEGRA_UART##uart##_BASE & 0xffff ; \
- movt rp, #TEGRA_UART##uart##_BASE >> 16 ; \
- /* Jump to save UART address */ \
- b 91f
-
- .macro addruart, rp, rv, tmp
- adr \rp, 99f @ actual addr of 99f
- ldr \rv, [\rp] @ linked addr is stored there
- sub \rv, \rv, \rp @ offset between the two
- ldr \rp, [\rp, #4] @ linked tegra_uart_config
- sub \tmp, \rp, \rv @ actual tegra_uart_config
- ldr \rp, [\tmp] @ Load tegra_uart_config
- cmp \rp, #1 @ needs initialization?
- bne 100f @ no; go load the addresses
- mov \rv, #0 @ yes; record init is done
- str \rv, [\tmp]
-
-#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA
- /* Check ODMDATA */
-10: movw \rp, #TEGRA_PMC_SCRATCH20 & 0xffff
- movt \rp, #TEGRA_PMC_SCRATCH20 >> 16
- ldr \rp, [\rp, #0] @ Load PMC_SCRATCH20
- ubfx \rv, \rp, #18, #2 @ 19:18 are console type
- cmp \rv, #2 @ 2 and 3 mean DCC, UART
- beq 11f @ some boards swap the meaning
- cmp \rv, #3 @ so accept either
- bne 90f
-11: ubfx \rv, \rp, #15, #3 @ 17:15 are UART ID
- cmp \rv, #0 @ UART 0?
- beq 20f
- cmp \rv, #1 @ UART 1?
- beq 21f
- cmp \rv, #2 @ UART 2?
- beq 22f
- cmp \rv, #3 @ UART 3?
- beq 23f
- cmp \rv, #4 @ UART 4?
- beq 24f
- b 90f @ invalid
-#endif
-
-#if defined(CONFIG_TEGRA_DEBUG_UARTA) || \
- defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
- /* Check UART A validity */
-20: checkuart(\rp, \rv, L, 6, A)
-#endif
-
-#if defined(CONFIG_TEGRA_DEBUG_UARTB) || \
- defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
- /* Check UART B validity */
-21: checkuart(\rp, \rv, L, 7, B)
-#endif
-
-#if defined(CONFIG_TEGRA_DEBUG_UARTC) || \
- defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
- /* Check UART C validity */
-22: checkuart(\rp, \rv, H, 23, C)
-#endif
-
-#if defined(CONFIG_TEGRA_DEBUG_UARTD) || \
- defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
- /* Check UART D validity */
-23: checkuart(\rp, \rv, U, 1, D)
-#endif
-
-#if defined(CONFIG_TEGRA_DEBUG_UARTE) || \
- defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
- /* Check UART E validity */
-24:
- checkuart(\rp, \rv, U, 2, E)
-#endif
-
- /* No valid UART found */
-90: mov \rp, #0
- /* fall through */
-
- /* Record whichever UART we chose */
-91: str \rp, [\tmp, #4] @ Store in tegra_uart_phys
- cmp \rp, #0 @ Valid UART address?
- bne 92f @ Yes, go process it
- str \rp, [\tmp, #8] @ Store 0 in tegra_uart_virt
- b 100f @ Done
-92: and \rv, \rp, #0xffffff @ offset within 1MB section
- add \rv, \rv, #UART_VIRTUAL_BASE
- str \rv, [\tmp, #8] @ Store in tegra_uart_virt
- movw \rv, #TEGRA_APB_MISC_GP_HIDREV & 0xffff
- movt \rv, #TEGRA_APB_MISC_GP_HIDREV >> 16
- ldr \rv, [\rv, #0] @ Load HIDREV
- ubfx \rv, \rv, #8, #8 @ 15:8 are SoC version
- cmp \rv, #0x20 @ Tegra20?
- moveq \rv, #0x75 @ Tegra20 divisor
- movne \rv, #0xdd @ Tegra30 divisor
- str \rv, [\tmp, #12] @ Save divisor to scratch
- /* uart[UART_LCR] = UART_LCR_WLEN8 | UART_LCR_DLAB; */
- mov \rv, #UART_LCR_WLEN8 | UART_LCR_DLAB
- str \rv, [\rp, #UART_LCR << UART_SHIFT]
- /* uart[UART_DLL] = div & 0xff; */
- ldr \rv, [\tmp, #12]
- and \rv, \rv, #0xff
- str \rv, [\rp, #UART_DLL << UART_SHIFT]
- /* uart[UART_DLM] = div >> 8; */
- ldr \rv, [\tmp, #12]
- lsr \rv, \rv, #8
- str \rv, [\rp, #UART_DLM << UART_SHIFT]
- /* uart[UART_LCR] = UART_LCR_WLEN8; */
- mov \rv, #UART_LCR_WLEN8
- str \rv, [\rp, #UART_LCR << UART_SHIFT]
- b 100f
-
- .align
-99: .word .
- .word tegra_uart_config
- .ltorg
-
- /* Load previously selected UART address */
-100: ldr \rp, [\tmp, #4] @ Load tegra_uart_phys
- ldr \rv, [\tmp, #8] @ Load tegra_uart_virt
- .endm
-
-/*
- * Code below is swiped from <asm/hardware/debug-8250.S>, but add an extra
- * check to make sure that the UART address is actually valid.
- */
-
- .macro senduart, rd, rx
- cmp \rx, #0
- strneb \rd, [\rx, #UART_TX << UART_SHIFT]
-1001:
- .endm
-
- .macro busyuart, rd, rx
- cmp \rx, #0
- beq 1002f
-1001: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT]
- and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
- teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
- bne 1001b
-1002:
- .endm
-
- .macro waituart, rd, rx
-#ifdef FLOW_CONTROL
- cmp \rx, #0
- beq 1002f
-1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT]
- tst \rd, #UART_MSR_CTS
- beq 1001b
-1002:
-#endif
- .endm
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-21 17:37:01 +0300