17 files changed, 709 insertions, 482 deletions

diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c
index 18febf92f20a..98bc7edc95a6 100644
--- a/arch/arm/mach-spear3xx/clock.c
+++ b/arch/arm/mach-spear3xx/clock.c
@@ -13,8 +13,8 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <mach/misc_regs.h>
 #include <plat/clock.h>
+#include <mach/misc_regs.h>
 
 /* root clks */
 /* 32 KHz oscillator clock */
@@ -39,18 +39,43 @@ static struct clk rtc_clk = {
 };
 
 /* clock derived from 24 MHz osc clk */
+/* pll masks structure */
+static struct pll_clk_masks pll1_masks = {
+	.mode_mask = PLL_MODE_MASK,
+	.mode_shift = PLL_MODE_SHIFT,
+	.norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK,
+	.norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT,
+	.dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK,
+	.dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT,
+	.div_p_mask = PLL_DIV_P_MASK,
+	.div_p_shift = PLL_DIV_P_SHIFT,
+	.div_n_mask = PLL_DIV_N_MASK,
+	.div_n_shift = PLL_DIV_N_SHIFT,
+};
+
 /* pll1 configuration structure */
 static struct pll_clk_config pll1_config = {
 	.mode_reg = PLL1_CTR,
 	.cfg_reg = PLL1_FRQ,
+	.masks = &pll1_masks,
+};
+
+/* pll rate configuration table, in ascending order of rates */
+struct pll_rate_tbl pll_rtbl[] = {
+	{.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
+	{.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
 };
 
 /* PLL1 clock */
 static struct clk pll1_clk = {
+	.flags = ENABLED_ON_INIT,
 	.pclk = &osc_24m_clk,
 	.en_reg = PLL1_CTR,
 	.en_reg_bit = PLL_ENABLE,
-	.recalc = &pll1_clk_recalc,
+	.calc_rate = &pll_calc_rate,
+	.recalc = &pll_clk_recalc,
+	.set_rate = &pll_clk_set_rate,
+	.rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
 	.private_data = &pll1_config,
 };
 
@@ -76,36 +101,83 @@ static struct clk cpu_clk = {
 	.recalc = &follow_parent,
 };
 
+/* ahb masks structure */
+static struct bus_clk_masks ahb_masks = {
+	.mask = PLL_HCLK_RATIO_MASK,
+	.shift = PLL_HCLK_RATIO_SHIFT,
+};
+
 /* ahb configuration structure */
 static struct bus_clk_config ahb_config = {
 	.reg = CORE_CLK_CFG,
-	.mask = PLL_HCLK_RATIO_MASK,
-	.shift = PLL_HCLK_RATIO_SHIFT,
+	.masks = &ahb_masks,
+};
+
+/* ahb rate configuration table, in ascending order of rates */
+struct bus_rate_tbl bus_rtbl[] = {
+	{.div = 3}, /* == parent divided by 4 */
+	{.div = 2}, /* == parent divided by 3 */
+	{.div = 1}, /* == parent divided by 2 */
+	{.div = 0}, /* == parent divided by 1 */
 };
 
 /* ahb clock */
 static struct clk ahb_clk = {
 	.flags = ALWAYS_ENABLED,
 	.pclk = &pll1_clk,
+	.calc_rate = &bus_calc_rate,
 	.recalc = &bus_clk_recalc,
+	.set_rate = &bus_clk_set_rate,
+	.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
 	.private_data = &ahb_config,
 };
 
-/* uart configurations */
-static struct aux_clk_config uart_config = {
+/* auxiliary synthesizers masks */
+static struct aux_clk_masks aux_masks = {
+	.eq_sel_mask = AUX_EQ_SEL_MASK,
+	.eq_sel_shift = AUX_EQ_SEL_SHIFT,
+	.eq1_mask = AUX_EQ1_SEL,
+	.eq2_mask = AUX_EQ2_SEL,
+	.xscale_sel_mask = AUX_XSCALE_MASK,
+	.xscale_sel_shift = AUX_XSCALE_SHIFT,
+	.yscale_sel_mask = AUX_YSCALE_MASK,
+	.yscale_sel_shift = AUX_YSCALE_SHIFT,
+};
+
+/* uart synth configurations */
+static struct aux_clk_config uart_synth_config = {
 	.synth_reg = UART_CLK_SYNT,
+	.masks = &aux_masks,
+};
+
+/* aux rate configuration table, in ascending order of rates */
+struct aux_rate_tbl aux_rtbl[] = {
+	/* For PLL1 = 332 MHz */
+	{.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
+	{.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
+	{.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
+};
+
+/* uart synth clock */
+static struct clk uart_synth_clk = {
+	.en_reg = UART_CLK_SYNT,
+	.en_reg_bit = AUX_SYNT_ENB,
+	.pclk = &pll1_clk,
+	.calc_rate = &aux_calc_rate,
+	.recalc = &aux_clk_recalc,
+	.set_rate = &aux_clk_set_rate,
+	.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
+	.private_data = &uart_synth_config,
 };
 
 /* uart parents */
 static struct pclk_info uart_pclk_info[] = {
 	{
-		.pclk = &pll1_clk,
-		.pclk_mask = AUX_CLK_PLL1_MASK,
-		.scalable = 1,
+		.pclk = &uart_synth_clk,
+		.pclk_val = AUX_CLK_PLL1_VAL,
 	}, {
 		.pclk = &pll3_48m_clk,
-		.pclk_mask = AUX_CLK_PLL3_MASK,
-		.scalable = 0,
+		.pclk_val = AUX_CLK_PLL3_VAL,
 	},
 };
 
@@ -123,25 +195,35 @@ static struct clk uart_clk = {
 	.en_reg_bit = UART_CLK_ENB,
 	.pclk_sel = &uart_pclk_sel,
 	.pclk_sel_shift = UART_CLK_SHIFT,
-	.recalc = &aux_clk_recalc,
-	.private_data = &uart_config,
+	.recalc = &follow_parent,
 };
 
 /* firda configurations */
-static struct aux_clk_config firda_config = {
+static struct aux_clk_config firda_synth_config = {
 	.synth_reg = FIRDA_CLK_SYNT,
+	.masks = &aux_masks,
+};
+
+/* firda synth clock */
+static struct clk firda_synth_clk = {
+	.en_reg = FIRDA_CLK_SYNT,
+	.en_reg_bit = AUX_SYNT_ENB,
+	.pclk = &pll1_clk,
+	.calc_rate = &aux_calc_rate,
+	.recalc = &aux_clk_recalc,
+	.set_rate = &aux_clk_set_rate,
+	.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
+	.private_data = &firda_synth_config,
 };
 
 /* firda parents */
 static struct pclk_info firda_pclk_info[] = {
 	{
-		.pclk = &pll1_clk,
-		.pclk_mask = AUX_CLK_PLL1_MASK,
-		.scalable = 1,
+		.pclk = &firda_synth_clk,
+		.pclk_val = AUX_CLK_PLL1_VAL,
 	}, {
 		.pclk = &pll3_48m_clk,
-		.pclk_mask = AUX_CLK_PLL3_MASK,
-		.scalable = 0,
+		.pclk_val = AUX_CLK_PLL3_VAL,
 	},
 };
 
@@ -159,73 +241,155 @@ static struct clk firda_clk = {
 	.en_reg_bit = FIRDA_CLK_ENB,
 	.pclk_sel = &firda_pclk_sel,
 	.pclk_sel_shift = FIRDA_CLK_SHIFT,
-	.recalc = &aux_clk_recalc,
-	.private_data = &firda_config,
+	.recalc = &follow_parent,
+};
+
+/* gpt synthesizer masks */
+static struct gpt_clk_masks gpt_masks = {
+	.mscale_sel_mask = GPT_MSCALE_MASK,
+	.mscale_sel_shift = GPT_MSCALE_SHIFT,
+	.nscale_sel_mask = GPT_NSCALE_MASK,
+	.nscale_sel_shift = GPT_NSCALE_SHIFT,
+};
+
+/* gpt rate configuration table, in ascending order of rates */
+struct gpt_rate_tbl gpt_rtbl[] = {
+	/* For pll1 = 332 MHz */
+	{.mscale = 4, .nscale = 0}, /* 41.5 MHz */
+	{.mscale = 2, .nscale = 0}, /* 55.3 MHz */
+	{.mscale = 1, .nscale = 0}, /* 83 MHz */
+};
+
+/* gpt0 synth clk config*/
+static struct gpt_clk_config gpt0_synth_config = {
+	.synth_reg = PRSC1_CLK_CFG,
+	.masks = &gpt_masks,
+};
+
+/* gpt synth clock */
+static struct clk gpt0_synth_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &pll1_clk,
+	.calc_rate = &gpt_calc_rate,
+	.recalc = &gpt_clk_recalc,
+	.set_rate = &gpt_clk_set_rate,
+	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+	.private_data = &gpt0_synth_config,
 };
 
 /* gpt parents */
-static struct pclk_info gpt_pclk_info[] = {
+static struct pclk_info gpt0_pclk_info[] = {
 	{
-		.pclk = &pll1_clk,
-		.pclk_mask = AUX_CLK_PLL1_MASK,
-		.scalable = 1,
+		.pclk = &gpt0_synth_clk,
+		.pclk_val = AUX_CLK_PLL1_VAL,
 	}, {
 		.pclk = &pll3_48m_clk,
-		.pclk_mask = AUX_CLK_PLL3_MASK,
-		.scalable = 0,
+		.pclk_val = AUX_CLK_PLL3_VAL,
 	},
 };
 
 /* gpt parent select structure */
-static struct pclk_sel gpt_pclk_sel = {
-	.pclk_info = gpt_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt_pclk_info),
+static struct pclk_sel gpt0_pclk_sel = {
+	.pclk_info = gpt0_pclk_info,
+	.pclk_count = ARRAY_SIZE(gpt0_pclk_info),
 	.pclk_sel_reg = PERIP_CLK_CFG,
 	.pclk_sel_mask = GPT_CLK_MASK,
 };
 
-/* gpt0 configurations */
-static struct aux_clk_config gpt0_config = {
-	.synth_reg = PRSC1_CLK_CFG,
-};
-
 /* gpt0 timer clock */
 static struct clk gpt0_clk = {
 	.flags = ALWAYS_ENABLED,
-	.pclk_sel = &gpt_pclk_sel,
+	.pclk_sel = &gpt0_pclk_sel,
 	.pclk_sel_shift = GPT0_CLK_SHIFT,
-	.recalc = &gpt_clk_recalc,
-	.private_data = &gpt0_config,
+	.recalc = &follow_parent,
 };
 
-/* gpt1 configurations */
-static struct aux_clk_config gpt1_config = {
+/* gpt1 synth clk configurations */
+static struct gpt_clk_config gpt1_synth_config = {
 	.synth_reg = PRSC2_CLK_CFG,
+	.masks = &gpt_masks,
+};
+
+/* gpt1 synth clock */
+static struct clk gpt1_synth_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &pll1_clk,
+	.calc_rate = &gpt_calc_rate,
+	.recalc = &gpt_clk_recalc,
+	.set_rate = &gpt_clk_set_rate,
+	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+	.private_data = &gpt1_synth_config,
+};
+
+static struct pclk_info gpt1_pclk_info[] = {
+	{
+		.pclk = &gpt1_synth_clk,
+		.pclk_val = AUX_CLK_PLL1_VAL,
+	}, {
+		.pclk = &pll3_48m_clk,
+		.pclk_val = AUX_CLK_PLL3_VAL,
+	},
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt1_pclk_sel = {
+	.pclk_info = gpt1_pclk_info,
+	.pclk_count = ARRAY_SIZE(gpt1_pclk_info),
+	.pclk_sel_reg = PERIP_CLK_CFG,
+	.pclk_sel_mask = GPT_CLK_MASK,
 };
 
 /* gpt1 timer clock */
 static struct clk gpt1_clk = {
 	.en_reg = PERIP1_CLK_ENB,
 	.en_reg_bit = GPT1_CLK_ENB,
-	.pclk_sel = &gpt_pclk_sel,
+	.pclk_sel = &gpt1_pclk_sel,
 	.pclk_sel_shift = GPT1_CLK_SHIFT,
-	.recalc = &gpt_clk_recalc,
-	.private_data = &gpt1_config,
+	.recalc = &follow_parent,
 };
 
-/* gpt2 configurations */
-static struct aux_clk_config gpt2_config = {
+/* gpt2 synth clk configurations */
+static struct gpt_clk_config gpt2_synth_config = {
 	.synth_reg = PRSC3_CLK_CFG,
+	.masks = &gpt_masks,
+};
+
+/* gpt1 synth clock */
+static struct clk gpt2_synth_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &pll1_clk,
+	.calc_rate = &gpt_calc_rate,
+	.recalc = &gpt_clk_recalc,
+	.set_rate = &gpt_clk_set_rate,
+	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+	.private_data = &gpt2_synth_config,
+};
+
+static struct pclk_info gpt2_pclk_info[] = {
+	{
+		.pclk = &gpt2_synth_clk,
+		.pclk_val = AUX_CLK_PLL1_VAL,
+	}, {
+		.pclk = &pll3_48m_clk,
+		.pclk_val = AUX_CLK_PLL3_VAL,
+	},
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt2_pclk_sel = {
+	.pclk_info = gpt2_pclk_info,
+	.pclk_count = ARRAY_SIZE(gpt2_pclk_info),
+	.pclk_sel_reg = PERIP_CLK_CFG,
+	.pclk_sel_mask = GPT_CLK_MASK,
 };
 
 /* gpt2 timer clock */
 static struct clk gpt2_clk = {
 	.en_reg = PERIP1_CLK_ENB,
 	.en_reg_bit = GPT2_CLK_ENB,
-	.pclk_sel = &gpt_pclk_sel,
+	.pclk_sel = &gpt2_pclk_sel,
 	.pclk_sel_shift = GPT2_CLK_SHIFT,
-	.recalc = &gpt_clk_recalc,
-	.private_data = &gpt2_config,
+	.recalc = &follow_parent,
 };
 
 /* clock derived from pll3 clk */
@@ -245,26 +409,27 @@ static struct clk usbd_clk = {
 	.recalc = &follow_parent,
 };
 
-/* clcd clock */
-static struct clk clcd_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll3_48m_clk,
-	.recalc = &follow_parent,
+/* clock derived from ahb clk */
+/* apb masks structure */
+static struct bus_clk_masks apb_masks = {
+	.mask = HCLK_PCLK_RATIO_MASK,
+	.shift = HCLK_PCLK_RATIO_SHIFT,
 };
 
-/* clock derived from ahb clk */
 /* apb configuration structure */
 static struct bus_clk_config apb_config = {
 	.reg = CORE_CLK_CFG,
-	.mask = HCLK_PCLK_RATIO_MASK,
-	.shift = HCLK_PCLK_RATIO_SHIFT,
+	.masks = &apb_masks,
 };
 
 /* apb clock */
 static struct clk apb_clk = {
 	.flags = ALWAYS_ENABLED,
 	.pclk = &ahb_clk,
+	.calc_rate = &bus_calc_rate,
 	.recalc = &bus_clk_recalc,
+	.set_rate = &bus_clk_set_rate,
+	.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
 	.private_data = &apb_config,
 };
 
@@ -325,8 +490,17 @@ static struct clk adc_clk = {
 	.recalc = &follow_parent,
 };
 
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+/* emi clock */
+static struct clk emi_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &ahb_clk,
+	.recalc = &follow_parent,
+};
+#endif
+
 /* ssp clock */
-static struct clk ssp_clk = {
+static struct clk ssp0_clk = {
 	.pclk = &apb_clk,
 	.en_reg = PERIP1_CLK_ENB,
 	.en_reg_bit = SSP_CLK_ENB,
@@ -343,14 +517,145 @@ static struct clk gpio_clk = {
 
 static struct clk dummy_apb_pclk;
 
+#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \
+	defined(CONFIG_MACH_SPEAR320)
+/* fsmc clock */
+static struct clk fsmc_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &ahb_clk,
+	.recalc = &follow_parent,
+};
+#endif
+
+/* common clocks to spear310 and spear320 */
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+/* uart1 clock */
+static struct clk uart1_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &apb_clk,
+	.recalc = &follow_parent,
+};
+
+/* uart2 clock */
+static struct clk uart2_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &apb_clk,
+	.recalc = &follow_parent,
+};
+#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
+
+/* common clocks to spear300 and spear320 */
+#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320)
+/* clcd clock */
+static struct clk clcd_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &pll3_48m_clk,
+	.recalc = &follow_parent,
+};
+
+/* sdhci clock */
+static struct clk sdhci_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &ahb_clk,
+	.recalc = &follow_parent,
+};
+#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */
+
+/* spear300 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR300
+/* gpio1 clock */
+static struct clk gpio1_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &apb_clk,
+	.recalc = &follow_parent,
+};
+
+/* keyboard clock */
+static struct clk kbd_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &apb_clk,
+	.recalc = &follow_parent,
+};
+
+#endif
+
+/* spear310 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR310
+/* uart3 clock */
+static struct clk uart3_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &apb_clk,
+	.recalc = &follow_parent,
+};
+
+/* uart4 clock */
+static struct clk uart4_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &apb_clk,
+	.recalc = &follow_parent,
+};
+
+/* uart5 clock */
+static struct clk uart5_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &apb_clk,
+	.recalc = &follow_parent,
+};
+#endif
+
+/* spear320 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR320
+/* can0 clock */
+static struct clk can0_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &apb_clk,
+	.recalc = &follow_parent,
+};
+
+/* can1 clock */
+static struct clk can1_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &apb_clk,
+	.recalc = &follow_parent,
+};
+
+/* i2c1 clock */
+static struct clk i2c1_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &ahb_clk,
+	.recalc = &follow_parent,
+};
+
+/* ssp1 clock */
+static struct clk ssp1_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &apb_clk,
+	.recalc = &follow_parent,
+};
+
+/* ssp2 clock */
+static struct clk ssp2_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &apb_clk,
+	.recalc = &follow_parent,
+};
+
+/* pwm clock */
+static struct clk pwm_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &apb_clk,
+	.recalc = &follow_parent,
+};
+#endif
+
 /* array of all spear 3xx clock lookups */
 static struct clk_lookup spear_clk_lookups[] = {
-	{ .con_id = "apb_pclk",	.clk = &dummy_apb_pclk},
+	{ .con_id = "apb_pclk",		.clk = &dummy_apb_pclk},
 	/* root clks */
 	{ .con_id = "osc_32k_clk",	.clk = &osc_32k_clk},
 	{ .con_id = "osc_24m_clk",	.clk = &osc_24m_clk},
 	/* clock derived from 32 KHz osc clk */
-	{ .dev_id = "rtc",		.clk = &rtc_clk},
+	{ .dev_id = "rtc-spear",	.clk = &rtc_clk},
 	/* clock derived from 24 MHz osc clk */
 	{ .con_id = "pll1_clk",		.clk = &pll1_clk},
 	{ .con_id = "pll3_48m_clk",	.clk = &pll3_48m_clk},
@@ -358,18 +663,22 @@ static struct clk_lookup spear_clk_lookups[] = {
 	/* clock derived from pll1 clk */
 	{ .con_id = "cpu_clk",		.clk = &cpu_clk},
 	{ .con_id = "ahb_clk",		.clk = &ahb_clk},
+	{ .con_id = "uart_synth_clk",	.clk = &uart_synth_clk},
+	{ .con_id = "firda_synth_clk",	.clk = &firda_synth_clk},
+	{ .con_id = "gpt0_synth_clk",	.clk = &gpt0_synth_clk},
+	{ .con_id = "gpt1_synth_clk",	.clk = &gpt1_synth_clk},
+	{ .con_id = "gpt2_synth_clk",	.clk = &gpt2_synth_clk},
 	{ .dev_id = "uart",		.clk = &uart_clk},
 	{ .dev_id = "firda",		.clk = &firda_clk},
 	{ .dev_id = "gpt0",		.clk = &gpt0_clk},
 	{ .dev_id = "gpt1",		.clk = &gpt1_clk},
 	{ .dev_id = "gpt2",		.clk = &gpt2_clk},
 	/* clock derived from pll3 clk */
-	{ .dev_id = "usbh",		.clk = &usbh_clk},
-	{ .dev_id = "usbd",		.clk = &usbd_clk},
-	{ .dev_id = "clcd",		.clk = &clcd_clk},
+	{ .dev_id = "designware_udc",   .clk = &usbd_clk},
+	{ .con_id = "usbh_clk",		.clk = &usbh_clk},
 	/* clock derived from ahb clk */
 	{ .con_id = "apb_clk",		.clk = &apb_clk},
-	{ .dev_id = "i2c",		.clk = &i2c_clk},
+	{ .dev_id = "i2c_designware.0",	.clk = &i2c_clk},
 	{ .dev_id = "dma",		.clk = &dma_clk},
 	{ .dev_id = "jpeg",		.clk = &jpeg_clk},
 	{ .dev_id = "gmac",		.clk = &gmac_clk},
@@ -377,8 +686,50 @@ static struct clk_lookup spear_clk_lookups[] = {
 	{ .dev_id = "c3",		.clk = &c3_clk},
 	/* clock derived from apb clk */
 	{ .dev_id = "adc",		.clk = &adc_clk},
-	{ .dev_id = "ssp",		.clk = &ssp_clk},
+	{ .dev_id = "ssp-pl022.0",	.clk = &ssp0_clk},
 	{ .dev_id = "gpio",		.clk = &gpio_clk},
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+	{ .dev_id = "physmap-flash",	.clk = &emi_clk},
+#endif
+#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \
+	defined(CONFIG_MACH_SPEAR320)
+	{ .con_id = "fsmc",		.clk = &fsmc_clk},
+#endif
+
+/* common clocks to spear310 and spear320 */
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+	{ .dev_id = "uart1",		.clk = &uart1_clk},
+	{ .dev_id = "uart2",		.clk = &uart2_clk},
+#endif
+
+	/* common clock to spear300 and spear320 */
+#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320)
+	{ .dev_id = "clcd",		.clk = &clcd_clk},
+	{ .dev_id = "sdhci",		.clk = &sdhci_clk},
+#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */
+
+	/* spear300 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR300
+	{ .dev_id = "gpio1",		.clk = &gpio1_clk},
+	{ .dev_id = "keyboard",		.clk = &kbd_clk},
+#endif
+
+	/* spear310 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR310
+	{ .dev_id = "uart3",		.clk = &uart3_clk},
+	{ .dev_id = "uart4",		.clk = &uart4_clk},
+	{ .dev_id = "uart5",		.clk = &uart5_clk},
+
+#endif
+	/* spear320 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR320
+	{ .dev_id = "c_can_platform.0",	.clk = &can0_clk},
+	{ .dev_id = "c_can_platform.1",	.clk = &can1_clk},
+	{ .dev_id = "i2c_designware.1",	.clk = &i2c1_clk},
+	{ .dev_id = "ssp-pl022.1",	.clk = &ssp1_clk},
+	{ .dev_id = "ssp-pl022.2",	.clk = &ssp2_clk},
+	{ .dev_id = "pwm",		.clk = &pwm_clk},
+#endif
 };
 
 void __init clk_init(void)
diff --git a/arch/arm/mach-spear3xx/include/mach/entry-macro.S b/arch/arm/mach-spear3xx/include/mach/entry-macro.S
index 947625d6b48d..53da4224ba3d 100644
--- a/arch/arm/mach-spear3xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-spear3xx/include/mach/entry-macro.S
@@ -11,9 +11,8 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <mach/hardware.h>
-#include <mach/spear.h>
 #include <asm/hardware/vic.h>
+#include <mach/hardware.h>
 
 		.macro	disable_fiq
 		.endm
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index af7e02c909a3..8e30636909ef 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -14,11 +14,11 @@
 #ifndef __MACH_GENERIC_H
 #define __MACH_GENERIC_H
 
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/amba/bus.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
 #include <plat/padmux.h>
 
 /* spear3xx declarations */
@@ -33,14 +33,14 @@
 /* Add spear3xx family device structure declarations here */
 extern struct amba_device gpio_device;
 extern struct amba_device uart_device;
-extern struct sys_timer spear_sys_timer;
+extern struct sys_timer spear3xx_timer;
 
 /* Add spear3xx family function declarations here */
 void __init clk_init(void);
+void __init spear_setup_timer(void);
 void __init spear3xx_map_io(void);
 void __init spear3xx_init_irq(void);
 void __init spear3xx_init(void);
-void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size);
 
 /* pad mux declarations */
 #define PMX_FIRDA_MASK		(1 << 14)
@@ -129,12 +129,10 @@ extern struct pmx_dev pmx_telecom_camera;
 extern struct pmx_dev pmx_telecom_dac;
 extern struct pmx_dev pmx_telecom_i2s;
 extern struct pmx_dev pmx_telecom_boot_pins;
-extern struct pmx_dev pmx_telecom_sdio_4bit;
-extern struct pmx_dev pmx_telecom_sdio_8bit;
+extern struct pmx_dev pmx_telecom_sdhci_4bit;
+extern struct pmx_dev pmx_telecom_sdhci_8bit;
 extern struct pmx_dev pmx_gpio1;
 
-void spear300_pmx_init(void);
-
 /* Add spear300 machine function declarations here */
 void __init spear300_init(void);
 
@@ -154,8 +152,6 @@ extern struct pmx_dev pmx_fsmc;
 extern struct pmx_dev pmx_rs485_0_1;
 extern struct pmx_dev pmx_tdm0;
 
-void spear310_pmx_init(void);
-
 /* Add spear310 machine function declarations here */
 void __init spear310_init(void);
 
@@ -176,14 +172,14 @@ extern struct pmx_dev pmx_clcd;
 extern struct pmx_dev pmx_emi;
 extern struct pmx_dev pmx_fsmc;
 extern struct pmx_dev pmx_spp;
-extern struct pmx_dev pmx_sdio;
+extern struct pmx_dev pmx_sdhci;
 extern struct pmx_dev pmx_i2s;
 extern struct pmx_dev pmx_uart1;
 extern struct pmx_dev pmx_uart1_modem;
 extern struct pmx_dev pmx_uart2;
 extern struct pmx_dev pmx_touchscreen;
 extern struct pmx_dev pmx_can;
-extern struct pmx_dev pmx_sdio_led;
+extern struct pmx_dev pmx_sdhci_led;
 extern struct pmx_dev pmx_pwm0;
 extern struct pmx_dev pmx_pwm1;
 extern struct pmx_dev pmx_pwm2;
@@ -195,8 +191,6 @@ extern struct pmx_dev pmx_smii0;
 extern struct pmx_dev pmx_smii1;
 extern struct pmx_dev pmx_i2c1;
 
-void spear320_pmx_init(void);
-
 /* Add spear320 machine function declarations here */
 void __init spear320_init(void);
 
diff --git a/arch/arm/mach-spear3xx/include/mach/hardware.h b/arch/arm/mach-spear3xx/include/mach/hardware.h
index 4a86e6a3c444..4660c0d8ec0d 100644
--- a/arch/arm/mach-spear3xx/include/mach/hardware.h
+++ b/arch/arm/mach-spear3xx/include/mach/hardware.h
@@ -14,6 +14,9 @@
 #ifndef __MACH_HARDWARE_H
 #define __MACH_HARDWARE_H
 
+#include <plat/hardware.h>
+#include <mach/spear.h>
+
 /* Vitual to physical translation of statically mapped space */
 #define IO_ADDRESS(x)		(x | 0xF0000000)
 
diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h
index 7f940b818473..a1a7f481866d 100644
--- a/arch/arm/mach-spear3xx/include/mach/irqs.h
+++ b/arch/arm/mach-spear3xx/include/mach/irqs.h
@@ -69,7 +69,7 @@
 #define IRQ_CLCD				IRQ_GEN_RAS_3
 
 /* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define IRQ_SDIO				IRQ_INTRCOMM_RAS_ARM
+#define IRQ_SDHCI				IRQ_INTRCOMM_RAS_ARM
 
 /* GPIO pins virtual irqs */
 #define SPEAR_GPIO_INT_BASE			(VIRQ_START + 9)
@@ -115,7 +115,7 @@
 #define VIRQ_SPP				(VIRQ_START + 2)
 
 /* IRQs sharing IRQ_GEN_RAS_2 */
-#define IRQ_SDIO				IRQ_GEN_RAS_2
+#define IRQ_SDHCI				IRQ_GEN_RAS_2
 
 /* IRQs sharing IRQ_GEN_RAS_3 */
 #define VIRQ_PLGPIO				(VIRQ_START + 3)
diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
index 38d767a1aba0..5bd8cd8d4852 100644
--- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
@@ -14,16 +14,16 @@
 #ifndef __MACH_MISC_REGS_H
 #define __MACH_MISC_REGS_H
 
-#include <mach/spear.h>
+#include <mach/hardware.h>
 
-#define MISC_BASE		VA_SPEAR3XX_ICM3_MISC_REG_BASE
+#define MISC_BASE		IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE)
 
-#define SOC_CFG_CTR		((unsigned int *)(MISC_BASE + 0x000))
-#define DIAG_CFG_CTR		((unsigned int *)(MISC_BASE + 0x004))
-#define PLL1_CTR		((unsigned int *)(MISC_BASE + 0x008))
-#define PLL1_FRQ		((unsigned int *)(MISC_BASE + 0x00C))
-#define PLL1_MOD		((unsigned int *)(MISC_BASE + 0x010))
-#define PLL2_CTR		((unsigned int *)(MISC_BASE + 0x014))
+#define SOC_CFG_CTR		(MISC_BASE + 0x000)
+#define DIAG_CFG_CTR		(MISC_BASE + 0x004)
+#define PLL1_CTR		(MISC_BASE + 0x008)
+#define PLL1_FRQ		(MISC_BASE + 0x00C)
+#define PLL1_MOD		(MISC_BASE + 0x010)
+#define PLL2_CTR		(MISC_BASE + 0x014)
 /* PLL_CTR register masks */
 #define PLL_ENABLE		2
 #define PLL_MODE_SHIFT		4
@@ -33,7 +33,7 @@
 #define PLL_MODE_DITH_DSB	2
 #define PLL_MODE_DITH_SSB	3
 
-#define PLL2_FRQ		((unsigned int *)(MISC_BASE + 0x018))
+#define PLL2_FRQ		(MISC_BASE + 0x018)
 /* PLL FRQ register masks */
 #define PLL_DIV_N_SHIFT		0
 #define PLL_DIV_N_MASK		0xFF
@@ -44,16 +44,16 @@
 #define PLL_DITH_FDBK_M_SHIFT	16
 #define PLL_DITH_FDBK_M_MASK	0xFFFF
 
-#define PLL2_MOD		((unsigned int *)(MISC_BASE + 0x01C))
-#define PLL_CLK_CFG		((unsigned int *)(MISC_BASE + 0x020))
-#define CORE_CLK_CFG		((unsigned int *)(MISC_BASE + 0x024))
+#define PLL2_MOD		(MISC_BASE + 0x01C)
+#define PLL_CLK_CFG		(MISC_BASE + 0x020)
+#define CORE_CLK_CFG		(MISC_BASE + 0x024)
 /* CORE CLK CFG register masks */
 #define PLL_HCLK_RATIO_SHIFT	10
 #define PLL_HCLK_RATIO_MASK	0x3
 #define HCLK_PCLK_RATIO_SHIFT	8
 #define HCLK_PCLK_RATIO_MASK	0x3
 
-#define PERIP_CLK_CFG		((unsigned int *)(MISC_BASE + 0x028))
+#define PERIP_CLK_CFG		(MISC_BASE + 0x028)
 /* PERIP_CLK_CFG register masks */
 #define UART_CLK_SHIFT		4
 #define UART_CLK_MASK		0x1
@@ -63,10 +63,10 @@
 #define GPT1_CLK_SHIFT		11
 #define GPT2_CLK_SHIFT		12
 #define GPT_CLK_MASK		0x1
-#define AUX_CLK_PLL3_MASK	0
-#define AUX_CLK_PLL1_MASK	1
+#define AUX_CLK_PLL3_VAL	0
+#define AUX_CLK_PLL1_VAL	1
 
-#define PERIP1_CLK_ENB		((unsigned int *)(MISC_BASE + 0x02C))
+#define PERIP1_CLK_ENB		(MISC_BASE + 0x02C)
 /* PERIP1_CLK_ENB register masks */
 #define UART_CLK_ENB		3
 #define SSP_CLK_ENB		5
@@ -85,34 +85,35 @@
 #define USBH_CLK_ENB		25
 #define C3_CLK_ENB		31
 
-#define SOC_CORE_ID		((unsigned int *)(MISC_BASE + 0x030))
-#define RAS_CLK_ENB		((unsigned int *)(MISC_BASE + 0x034))
-#define PERIP1_SOF_RST		((unsigned int *)(MISC_BASE + 0x038))
+#define SOC_CORE_ID		(MISC_BASE + 0x030)
+#define RAS_CLK_ENB		(MISC_BASE + 0x034)
+#define PERIP1_SOF_RST		(MISC_BASE + 0x038)
 /* PERIP1_SOF_RST register masks */
 #define JPEG_SOF_RST		8
 
-#define SOC_USER_ID		((unsigned int *)(MISC_BASE + 0x03C))
-#define RAS_SOF_RST		((unsigned int *)(MISC_BASE + 0x040))
-#define PRSC1_CLK_CFG		((unsigned int *)(MISC_BASE + 0x044))
-#define PRSC2_CLK_CFG		((unsigned int *)(MISC_BASE + 0x048))
-#define PRSC3_CLK_CFG		((unsigned int *)(MISC_BASE + 0x04C))
+#define SOC_USER_ID		(MISC_BASE + 0x03C)
+#define RAS_SOF_RST		(MISC_BASE + 0x040)
+#define PRSC1_CLK_CFG		(MISC_BASE + 0x044)
+#define PRSC2_CLK_CFG		(MISC_BASE + 0x048)
+#define PRSC3_CLK_CFG		(MISC_BASE + 0x04C)
 /* gpt synthesizer register masks */
 #define GPT_MSCALE_SHIFT	0
 #define GPT_MSCALE_MASK		0xFFF
 #define GPT_NSCALE_SHIFT	12
 #define GPT_NSCALE_MASK		0xF
 
-#define AMEM_CLK_CFG		((unsigned int *)(MISC_BASE + 0x050))
-#define EXPI_CLK_CFG		((unsigned int *)(MISC_BASE + 0x054))
-#define CLCD_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x05C))
-#define FIRDA_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x060))
-#define UART_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x064))
-#define GMAC_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x068))
-#define RAS1_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x06C))
-#define RAS2_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x070))
-#define RAS3_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x074))
-#define RAS4_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x078))
+#define AMEM_CLK_CFG		(MISC_BASE + 0x050)
+#define EXPI_CLK_CFG		(MISC_BASE + 0x054)
+#define CLCD_CLK_SYNT		(MISC_BASE + 0x05C)
+#define FIRDA_CLK_SYNT		(MISC_BASE + 0x060)
+#define UART_CLK_SYNT		(MISC_BASE + 0x064)
+#define GMAC_CLK_SYNT		(MISC_BASE + 0x068)
+#define RAS1_CLK_SYNT		(MISC_BASE + 0x06C)
+#define RAS2_CLK_SYNT		(MISC_BASE + 0x070)
+#define RAS3_CLK_SYNT		(MISC_BASE + 0x074)
+#define RAS4_CLK_SYNT		(MISC_BASE + 0x078)
 /* aux clk synthesiser register masks for irda to ras4 */
+#define AUX_SYNT_ENB		31
 #define AUX_EQ_SEL_SHIFT	30
 #define AUX_EQ_SEL_MASK		1
 #define AUX_EQ1_SEL		0
@@ -122,42 +123,42 @@
 #define AUX_YSCALE_SHIFT	0
 #define AUX_YSCALE_MASK		0xFFF
 
-#define ICM1_ARB_CFG		((unsigned int *)(MISC_BASE + 0x07C))
-#define ICM2_ARB_CFG		((unsigned int *)(MISC_BASE + 0x080))
-#define ICM3_ARB_CFG		((unsigned int *)(MISC_BASE + 0x084))
-#define ICM4_ARB_CFG		((unsigned int *)(MISC_BASE + 0x088))
-#define ICM5_ARB_CFG		((unsigned int *)(MISC_BASE + 0x08C))
-#define ICM6_ARB_CFG		((unsigned int *)(MISC_BASE + 0x090))
-#define ICM7_ARB_CFG		((unsigned int *)(MISC_BASE + 0x094))
-#define ICM8_ARB_CFG		((unsigned int *)(MISC_BASE + 0x098))
-#define ICM9_ARB_CFG		((unsigned int *)(MISC_BASE + 0x09C))
-#define DMA_CHN_CFG		((unsigned int *)(MISC_BASE + 0x0A0))
-#define USB2_PHY_CFG		((unsigned int *)(MISC_BASE + 0x0A4))
-#define GMAC_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0A8))
-#define EXPI_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0AC))
-#define PRC1_LOCK_CTR		((unsigned int *)(MISC_BASE + 0x0C0))
-#define PRC2_LOCK_CTR		((unsigned int *)(MISC_BASE + 0x0C4))
-#define PRC3_LOCK_CTR		((unsigned int *)(MISC_BASE + 0x0C8))
-#define PRC4_LOCK_CTR		((unsigned int *)(MISC_BASE + 0x0CC))
-#define PRC1_IRQ_CTR		((unsigned int *)(MISC_BASE + 0x0D0))
-#define PRC2_IRQ_CTR		((unsigned int *)(MISC_BASE + 0x0D4))
-#define PRC3_IRQ_CTR		((unsigned int *)(MISC_BASE + 0x0D8))
-#define PRC4_IRQ_CTR		((unsigned int *)(MISC_BASE + 0x0DC))
-#define PWRDOWN_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0E0))
-#define COMPSSTL_1V8_CFG	((unsigned int *)(MISC_BASE + 0x0E4))
-#define COMPSSTL_2V5_CFG	((unsigned int *)(MISC_BASE + 0x0E8))
-#define COMPCOR_3V3_CFG		((unsigned int *)(MISC_BASE + 0x0EC))
-#define SSTLPAD_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0F0))
-#define BIST1_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0F4))
-#define BIST2_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0F8))
-#define BIST3_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0FC))
-#define BIST4_CFG_CTR		((unsigned int *)(MISC_BASE + 0x100))
-#define BIST5_CFG_CTR		((unsigned int *)(MISC_BASE + 0x104))
-#define BIST1_STS_RES		((unsigned int *)(MISC_BASE + 0x108))
-#define BIST2_STS_RES		((unsigned int *)(MISC_BASE + 0x10C))
-#define BIST3_STS_RES		((unsigned int *)(MISC_BASE + 0x110))
-#define BIST4_STS_RES		((unsigned int *)(MISC_BASE + 0x114))
-#define BIST5_STS_RES		((unsigned int *)(MISC_BASE + 0x118))
-#define SYSERR_CFG_CTR		((unsigned int *)(MISC_BASE + 0x11C))
+#define ICM1_ARB_CFG		(MISC_BASE + 0x07C)
+#define ICM2_ARB_CFG		(MISC_BASE + 0x080)
+#define ICM3_ARB_CFG		(MISC_BASE + 0x084)
+#define ICM4_ARB_CFG		(MISC_BASE + 0x088)
+#define ICM5_ARB_CFG		(MISC_BASE + 0x08C)
+#define ICM6_ARB_CFG		(MISC_BASE + 0x090)
+#define ICM7_ARB_CFG		(MISC_BASE + 0x094)
+#define ICM8_ARB_CFG		(MISC_BASE + 0x098)
+#define ICM9_ARB_CFG		(MISC_BASE + 0x09C)
+#define DMA_CHN_CFG		(MISC_BASE + 0x0A0)
+#define USB2_PHY_CFG		(MISC_BASE + 0x0A4)
+#define GMAC_CFG_CTR		(MISC_BASE + 0x0A8)
+#define EXPI_CFG_CTR		(MISC_BASE + 0x0AC)
+#define PRC1_LOCK_CTR		(MISC_BASE + 0x0C0)
+#define PRC2_LOCK_CTR		(MISC_BASE + 0x0C4)
+#define PRC3_LOCK_CTR		(MISC_BASE + 0x0C8)
+#define PRC4_LOCK_CTR		(MISC_BASE + 0x0CC)
+#define PRC1_IRQ_CTR		(MISC_BASE + 0x0D0)
+#define PRC2_IRQ_CTR		(MISC_BASE + 0x0D4)
+#define PRC3_IRQ_CTR		(MISC_BASE + 0x0D8)
+#define PRC4_IRQ_CTR		(MISC_BASE + 0x0DC)
+#define PWRDOWN_CFG_CTR		(MISC_BASE + 0x0E0)
+#define COMPSSTL_1V8_CFG	(MISC_BASE + 0x0E4)
+#define COMPSSTL_2V5_CFG	(MISC_BASE + 0x0E8)
+#define COMPCOR_3V3_CFG		(MISC_BASE + 0x0EC)
+#define SSTLPAD_CFG_CTR		(MISC_BASE + 0x0F0)
+#define BIST1_CFG_CTR		(MISC_BASE + 0x0F4)
+#define BIST2_CFG_CTR		(MISC_BASE + 0x0F8)
+#define BIST3_CFG_CTR		(MISC_BASE + 0x0FC)
+#define BIST4_CFG_CTR		(MISC_BASE + 0x100)
+#define BIST5_CFG_CTR		(MISC_BASE + 0x104)
+#define BIST1_STS_RES		(MISC_BASE + 0x108)
+#define BIST2_STS_RES		(MISC_BASE + 0x10C)
+#define BIST3_STS_RES		(MISC_BASE + 0x110)
+#define BIST4_STS_RES		(MISC_BASE + 0x114)
+#define BIST5_STS_RES		(MISC_BASE + 0x118)
+#define SYSERR_CFG_CTR		(MISC_BASE + 0x11C)
 
 #endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h
index dcca8568a486..63fd98356919 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear.h
@@ -14,124 +14,61 @@
 #ifndef __MACH_SPEAR3XX_H
 #define __MACH_SPEAR3XX_H
 
-#include <mach/hardware.h>
+#include <asm/memory.h>
 #include <mach/spear300.h>
 #include <mach/spear310.h>
 #include <mach/spear320.h>
 
-#define SPEAR3XX_ML_SDRAM_BASE		0x00000000
-#define SPEAR3XX_ML_SDRAM_SIZE		0x40000000
+#define SPEAR3XX_ML_SDRAM_BASE		UL(0x00000000)
 
-#define SPEAR3XX_ICM9_BASE		0xC0000000
-#define SPEAR3XX_ICM9_SIZE		0x10000000
+#define SPEAR3XX_ICM9_BASE		UL(0xC0000000)
 
 /* ICM1 - Low speed connection */
-#define SPEAR3XX_ICM1_2_BASE		0xD0000000
-#define SPEAR3XX_ICM1_2_SIZE		0x10000000
-
-#define SPEAR3XX_ICM1_UART_BASE		0xD0000000
+#define SPEAR3XX_ICM1_2_BASE		UL(0xD0000000)
+#define SPEAR3XX_ICM1_UART_BASE		UL(0xD0000000)
 #define VA_SPEAR3XX_ICM1_UART_BASE	IO_ADDRESS(SPEAR3XX_ICM1_UART_BASE)
-#define SPEAR3XX_ICM1_UART_SIZE		0x00080000
-
-#define SPEAR3XX_ICM1_ADC_BASE		0xD0080000
-#define SPEAR3XX_ICM1_ADC_SIZE		0x00080000
-
-#define SPEAR3XX_ICM1_SSP_BASE		0xD0100000
-#define SPEAR3XX_ICM1_SSP_SIZE		0x00080000
-
-#define SPEAR3XX_ICM1_I2C_BASE		0xD0180000
-#define SPEAR3XX_ICM1_I2C_SIZE		0x00080000
-
-#define SPEAR3XX_ICM1_JPEG_BASE		0xD0800000
-#define SPEAR3XX_ICM1_JPEG_SIZE		0x00800000
-
-#define SPEAR3XX_ICM1_IRDA_BASE		0xD1000000
-#define SPEAR3XX_ICM1_IRDA_SIZE		0x00080000
-
-#define SPEAR3XX_ICM1_SRAM_BASE		0xD2800000
-#define SPEAR3XX_ICM1_SRAM_SIZE		0x05800000
+#define SPEAR3XX_ICM1_ADC_BASE		UL(0xD0080000)
+#define SPEAR3XX_ICM1_SSP_BASE		UL(0xD0100000)
+#define SPEAR3XX_ICM1_I2C_BASE		UL(0xD0180000)
+#define SPEAR3XX_ICM1_JPEG_BASE		UL(0xD0800000)
+#define SPEAR3XX_ICM1_IRDA_BASE		UL(0xD1000000)
+#define SPEAR3XX_ICM1_SRAM_BASE		UL(0xD2800000)
 
 /* ICM2 - Application Subsystem */
-#define SPEAR3XX_ICM2_HWACCEL0_BASE	0xD8800000
-#define SPEAR3XX_ICM2_HWACCEL0_SIZE	0x00800000
-
-#define SPEAR3XX_ICM2_HWACCEL1_BASE	0xD9000000
-#define SPEAR3XX_ICM2_HWACCEL1_SIZE	0x00800000
+#define SPEAR3XX_ICM2_HWACCEL0_BASE	UL(0xD8800000)
+#define SPEAR3XX_ICM2_HWACCEL1_BASE	UL(0xD9000000)
 
 /* ICM4 - High Speed Connection */
-#define SPEAR3XX_ICM4_BASE		0xE0000000
-#define SPEAR3XX_ICM4_SIZE		0x08000000
-
-#define SPEAR3XX_ICM4_MII_BASE		0xE0800000
-#define SPEAR3XX_ICM4_MII_SIZE		0x00800000
-
-#define SPEAR3XX_ICM4_USBD_FIFO_BASE	0xE1000000
-#define SPEAR3XX_ICM4_USBD_FIFO_SIZE	0x00100000
-
-#define SPEAR3XX_ICM4_USBD_CSR_BASE	0xE1100000
-#define SPEAR3XX_ICM4_USBD_CSR_SIZE	0x00100000
-
-#define SPEAR3XX_ICM4_USBD_PLDT_BASE	0xE1200000
-#define SPEAR3XX_ICM4_USBD_PLDT_SIZE	0x00100000
-
-#define SPEAR3XX_ICM4_USB_EHCI0_1_BASE	0xE1800000
-#define SPEAR3XX_ICM4_USB_EHCI0_1_SIZE	0x00100000
-
-#define SPEAR3XX_ICM4_USB_OHCI0_BASE	0xE1900000
-#define SPEAR3XX_ICM4_USB_OHCI0_SIZE	0x00100000
-
-#define SPEAR3XX_ICM4_USB_OHCI1_BASE	0xE2100000
-#define SPEAR3XX_ICM4_USB_OHCI1_SIZE	0x00100000
-
-#define SPEAR3XX_ICM4_USB_ARB_BASE	0xE2800000
-#define SPEAR3XX_ICM4_USB_ARB_SIZE	0x00010000
+#define SPEAR3XX_ICM4_BASE		UL(0xE0000000)
+#define SPEAR3XX_ICM4_MII_BASE		UL(0xE0800000)
+#define SPEAR3XX_ICM4_USBD_FIFO_BASE	UL(0xE1000000)
+#define SPEAR3XX_ICM4_USBD_CSR_BASE	UL(0xE1100000)
+#define SPEAR3XX_ICM4_USBD_PLDT_BASE	UL(0xE1200000)
+#define SPEAR3XX_ICM4_USB_EHCI0_1_BASE	UL(0xE1800000)
+#define SPEAR3XX_ICM4_USB_OHCI0_BASE	UL(0xE1900000)
+#define SPEAR3XX_ICM4_USB_OHCI1_BASE	UL(0xE2100000)
+#define SPEAR3XX_ICM4_USB_ARB_BASE	UL(0xE2800000)
 
 /* ML1 - Multi Layer CPU Subsystem */
-#define SPEAR3XX_ICM3_ML1_2_BASE	0xF0000000
-#define SPEAR3XX_ICM3_ML1_2_SIZE	0x0F000000
-
-#define SPEAR3XX_ML1_TMR_BASE		0xF0000000
-#define SPEAR3XX_ML1_TMR_SIZE		0x00100000
-
-#define SPEAR3XX_ML1_VIC_BASE		0xF1100000
+#define SPEAR3XX_ICM3_ML1_2_BASE	UL(0xF0000000)
+#define SPEAR3XX_ML1_TMR_BASE		UL(0xF0000000)
+#define SPEAR3XX_ML1_VIC_BASE		UL(0xF1100000)
 #define VA_SPEAR3XX_ML1_VIC_BASE	IO_ADDRESS(SPEAR3XX_ML1_VIC_BASE)
-#define SPEAR3XX_ML1_VIC_SIZE		0x00100000
 
 /* ICM3 - Basic Subsystem */
-#define SPEAR3XX_ICM3_SMEM_BASE		0xF8000000
-#define SPEAR3XX_ICM3_SMEM_SIZE		0x04000000
-
-#define SPEAR3XX_ICM3_SMI_CTRL_BASE	0xFC000000
-#define SPEAR3XX_ICM3_SMI_CTRL_SIZE	0x00200000
-
-#define SPEAR3XX_ICM3_DMA_BASE		0xFC400000
-#define SPEAR3XX_ICM3_DMA_SIZE		0x00200000
-
-#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE	0xFC600000
-#define SPEAR3XX_ICM3_SDRAM_CTRL_SIZE	0x00200000
-
-#define SPEAR3XX_ICM3_TMR0_BASE		0xFC800000
-#define SPEAR3XX_ICM3_TMR0_SIZE		0x00080000
-
-#define SPEAR3XX_ICM3_WDT_BASE		0xFC880000
-#define SPEAR3XX_ICM3_WDT_SIZE		0x00080000
-
-#define SPEAR3XX_ICM3_RTC_BASE		0xFC900000
-#define SPEAR3XX_ICM3_RTC_SIZE		0x00080000
-
-#define SPEAR3XX_ICM3_GPIO_BASE		0xFC980000
-#define SPEAR3XX_ICM3_GPIO_SIZE		0x00080000
-
-#define SPEAR3XX_ICM3_SYS_CTRL_BASE	0xFCA00000
+#define SPEAR3XX_ICM3_SMEM_BASE		UL(0xF8000000)
+#define SPEAR3XX_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
+#define SPEAR3XX_ICM3_DMA_BASE		UL(0xFC400000)
+#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE	UL(0xFC600000)
+#define SPEAR3XX_ICM3_TMR0_BASE		UL(0xFC800000)
+#define SPEAR3XX_ICM3_WDT_BASE		UL(0xFC880000)
+#define SPEAR3XX_ICM3_RTC_BASE		UL(0xFC900000)
+#define SPEAR3XX_ICM3_GPIO_BASE		UL(0xFC980000)
+#define SPEAR3XX_ICM3_SYS_CTRL_BASE	UL(0xFCA00000)
 #define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE	IO_ADDRESS(SPEAR3XX_ICM3_SYS_CTRL_BASE)
-#define SPEAR3XX_ICM3_SYS_CTRL_SIZE	0x00080000
-
-#define SPEAR3XX_ICM3_MISC_REG_BASE	0xFCA80000
+#define SPEAR3XX_ICM3_MISC_REG_BASE	UL(0xFCA80000)
 #define VA_SPEAR3XX_ICM3_MISC_REG_BASE	IO_ADDRESS(SPEAR3XX_ICM3_MISC_REG_BASE)
-#define SPEAR3XX_ICM3_MISC_REG_SIZE	0x00080000
-
-#define SPEAR3XX_ICM3_TMR1_BASE		0xFCB00000
-#define SPEAR3XX_ICM3_TMR1_SIZE		0x00080000
+#define SPEAR3XX_ICM3_TMR1_BASE		UL(0xFCB00000)
 
 /* Debug uart for linux, will be used for debug and uncompress messages */
 #define SPEAR_DBG_UART_BASE		SPEAR3XX_ICM1_UART_BASE
diff --git a/arch/arm/mach-spear3xx/include/mach/spear300.h b/arch/arm/mach-spear3xx/include/mach/spear300.h
index ccaa76522ee2..c723515f8853 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear300.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear300.h
@@ -17,11 +17,9 @@
 #define __MACH_SPEAR300_H
 
 /* Base address of various IPs */
-#define SPEAR300_TELECOM_BASE		0x50000000
-#define SPEAR300_TELECOM_SIZE		0x10000000
+#define SPEAR300_TELECOM_BASE		UL(0x50000000)
 
 /* Interrupt registers offsets and masks */
-#define SPEAR300_TELECOM_REG_SIZE	0x00010000
 #define INT_ENB_MASK_REG		0x54
 #define INT_STS_MASK_REG		0x58
 #define IT_PERS_S_IRQ_MASK		(1 << 0)
@@ -36,47 +34,20 @@
 
 #define SHIRQ_RAS1_MASK			0x1FF
 
-#define SPEAR300_CLCD_BASE		0x60000000
-#define SPEAR300_CLCD_SIZE		0x10000000
-
-#define SPEAR300_SDIO_BASE		0x70000000
-#define SPEAR300_SDIO_SIZE		0x10000000
-
-#define SPEAR300_NAND_0_BASE		0x80000000
-#define SPEAR300_NAND_0_SIZE		0x04000000
-
-#define SPEAR300_NAND_1_BASE		0x84000000
-#define SPEAR300_NAND_1_SIZE		0x04000000
-
-#define SPEAR300_NAND_2_BASE		0x88000000
-#define SPEAR300_NAND_2_SIZE		0x04000000
-
-#define SPEAR300_NAND_3_BASE		0x8c000000
-#define SPEAR300_NAND_3_SIZE		0x04000000
-
-#define SPEAR300_NOR_0_BASE		0x90000000
-#define SPEAR300_NOR_0_SIZE		0x01000000
-
-#define SPEAR300_NOR_1_BASE		0x91000000
-#define SPEAR300_NOR_1_SIZE		0x01000000
-
-#define SPEAR300_NOR_2_BASE		0x92000000
-#define SPEAR300_NOR_2_SIZE		0x01000000
-
-#define SPEAR300_NOR_3_BASE		0x93000000
-#define SPEAR300_NOR_3_SIZE		0x01000000
-
-#define SPEAR300_FSMC_BASE		0x94000000
-#define SPEAR300_FSMC_SIZE		0x05000000
-
-#define SPEAR300_SOC_CONFIG_BASE	0x99000000
-#define SPEAR300_SOC_CONFIG_SIZE	0x00000008
-
-#define SPEAR300_KEYBOARD_BASE		0xA0000000
-#define SPEAR300_KEYBOARD_SIZE		0x09000000
-
-#define SPEAR300_GPIO_BASE		0xA9000000
-#define SPEAR300_GPIO_SIZE		0x07000000
+#define SPEAR300_CLCD_BASE		UL(0x60000000)
+#define SPEAR300_SDHCI_BASE		UL(0x70000000)
+#define SPEAR300_NAND_0_BASE		UL(0x80000000)
+#define SPEAR300_NAND_1_BASE		UL(0x84000000)
+#define SPEAR300_NAND_2_BASE		UL(0x88000000)
+#define SPEAR300_NAND_3_BASE		UL(0x8c000000)
+#define SPEAR300_NOR_0_BASE		UL(0x90000000)
+#define SPEAR300_NOR_1_BASE		UL(0x91000000)
+#define SPEAR300_NOR_2_BASE		UL(0x92000000)
+#define SPEAR300_NOR_3_BASE		UL(0x93000000)
+#define SPEAR300_FSMC_BASE		UL(0x94000000)
+#define SPEAR300_SOC_CONFIG_BASE	UL(0x99000000)
+#define SPEAR300_KEYBOARD_BASE		UL(0xA0000000)
+#define SPEAR300_GPIO_BASE		UL(0xA9000000)
 
 #endif /* __MACH_SPEAR300_H */
 
diff --git a/arch/arm/mach-spear3xx/include/mach/spear310.h b/arch/arm/mach-spear3xx/include/mach/spear310.h
index b27bb8af3309..1e853479b8cd 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear310.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear310.h
@@ -16,30 +16,18 @@
 #ifndef __MACH_SPEAR310_H
 #define __MACH_SPEAR310_H
 
-#define SPEAR310_NAND_BASE		0x40000000
-#define SPEAR310_NAND_SIZE		0x04000000
+#define SPEAR310_NAND_BASE		UL(0x40000000)
+#define SPEAR310_FSMC_BASE		UL(0x44000000)
+#define SPEAR310_UART1_BASE		UL(0xB2000000)
+#define SPEAR310_UART2_BASE		UL(0xB2080000)
+#define SPEAR310_UART3_BASE		UL(0xB2100000)
+#define SPEAR310_UART4_BASE		UL(0xB2180000)
+#define SPEAR310_UART5_BASE		UL(0xB2200000)
+#define SPEAR310_HDLC_BASE		UL(0xB2800000)
+#define SPEAR310_RS485_0_BASE		UL(0xB3000000)
+#define SPEAR310_RS485_1_BASE		UL(0xB3800000)
+#define SPEAR310_SOC_CONFIG_BASE	UL(0xB4000000)
 
-#define SPEAR310_FSMC_BASE		0x44000000
-#define SPEAR310_FSMC_SIZE		0x01000000
-
-#define SPEAR310_UART1_BASE		0xB2000000
-#define SPEAR310_UART2_BASE		0xB2080000
-#define SPEAR310_UART3_BASE		0xB2100000
-#define SPEAR310_UART4_BASE		0xB2180000
-#define SPEAR310_UART5_BASE		0xB2200000
-#define SPEAR310_UART_SIZE		0x00080000
-
-#define SPEAR310_HDLC_BASE		0xB2800000
-#define SPEAR310_HDLC_SIZE		0x00800000
-
-#define SPEAR310_RS485_0_BASE		0xB3000000
-#define SPEAR310_RS485_0_SIZE		0x00800000
-
-#define SPEAR310_RS485_1_BASE		0xB3800000
-#define SPEAR310_RS485_1_SIZE		0x00800000
-
-#define SPEAR310_SOC_CONFIG_BASE	0xB4000000
-#define SPEAR310_SOC_CONFIG_SIZE	0x00000070
 /* Interrupt registers offsets and masks */
 #define INT_STS_MASK_REG		0x04
 #define SMII0_IRQ_MASK			(1 << 0)
diff --git a/arch/arm/mach-spear3xx/include/mach/spear320.h b/arch/arm/mach-spear3xx/include/mach/spear320.h
index cacf17a958cd..940f0d85d959 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear320.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear320.h
@@ -16,54 +16,25 @@
 #ifndef __MACH_SPEAR320_H
 #define __MACH_SPEAR320_H
 
-#define SPEAR320_EMI_CTRL_BASE		0x40000000
-#define SPEAR320_EMI_CTRL_SIZE		0x08000000
+#define SPEAR320_EMI_CTRL_BASE		UL(0x40000000)
+#define SPEAR320_FSMC_BASE		UL(0x4C000000)
+#define SPEAR320_NAND_BASE		UL(0x50000000)
+#define SPEAR320_I2S_BASE		UL(0x60000000)
+#define SPEAR320_SDHCI_BASE		UL(0x70000000)
+#define SPEAR320_CLCD_BASE		UL(0x90000000)
+#define SPEAR320_PAR_PORT_BASE		UL(0xA0000000)
+#define SPEAR320_CAN0_BASE		UL(0xA1000000)
+#define SPEAR320_CAN1_BASE		UL(0xA2000000)
+#define SPEAR320_UART1_BASE		UL(0xA3000000)
+#define SPEAR320_UART2_BASE		UL(0xA4000000)
+#define SPEAR320_SSP0_BASE		UL(0xA5000000)
+#define SPEAR320_SSP1_BASE		UL(0xA6000000)
+#define SPEAR320_I2C_BASE		UL(0xA7000000)
+#define SPEAR320_PWM_BASE		UL(0xA8000000)
+#define SPEAR320_SMII0_BASE		UL(0xAA000000)
+#define SPEAR320_SMII1_BASE		UL(0xAB000000)
+#define SPEAR320_SOC_CONFIG_BASE	UL(0xB3000000)
 
-#define SPEAR320_FSMC_BASE		0x4C000000
-#define SPEAR320_FSMC_SIZE		0x01000000
-
-#define SPEAR320_I2S_BASE		0x60000000
-#define SPEAR320_I2S_SIZE		0x10000000
-
-#define SPEAR320_SDIO_BASE		0x70000000
-#define SPEAR320_SDIO_SIZE		0x10000000
-
-#define SPEAR320_CLCD_BASE		0x90000000
-#define SPEAR320_CLCD_SIZE		0x10000000
-
-#define SPEAR320_PAR_PORT_BASE		0xA0000000
-#define SPEAR320_PAR_PORT_SIZE		0x01000000
-
-#define SPEAR320_CAN0_BASE		0xA1000000
-#define SPEAR320_CAN0_SIZE		0x01000000
-
-#define SPEAR320_CAN1_BASE		0xA2000000
-#define SPEAR320_CAN1_SIZE		0x01000000
-
-#define SPEAR320_UART1_BASE		0xA3000000
-#define SPEAR320_UART2_BASE		0xA4000000
-#define SPEAR320_UART_SIZE		0x01000000
-
-#define SPEAR320_SSP0_BASE		0xA5000000
-#define SPEAR320_SSP0_SIZE		0x01000000
-
-#define SPEAR320_SSP1_BASE		0xA6000000
-#define SPEAR320_SSP1_SIZE		0x01000000
-
-#define SPEAR320_I2C_BASE		0xA7000000
-#define SPEAR320_I2C_SIZE		0x01000000
-
-#define SPEAR320_PWM_BASE		0xA8000000
-#define SPEAR320_PWM_SIZE		0x01000000
-
-#define SPEAR320_SMII0_BASE		0xAA000000
-#define SPEAR320_SMII0_SIZE		0x01000000
-
-#define SPEAR320_SMII1_BASE		0xAB000000
-#define SPEAR320_SMII1_SIZE		0x01000000
-
-#define SPEAR320_SOC_CONFIG_BASE	0xB4000000
-#define SPEAR320_SOC_CONFIG_SIZE	0x00000070
 /* Interrupt registers offsets and masks */
 #define INT_STS_MASK_REG		0x04
 #define INT_CLR_MASK_REG		0x04
@@ -74,7 +45,7 @@
 #define EMI_IRQ_MASK			(1 << 7)
 #define CLCD_IRQ_MASK			(1 << 8)
 #define SPP_IRQ_MASK			(1 << 9)
-#define SDIO_IRQ_MASK			(1 << 10)
+#define SDHCI_IRQ_MASK			(1 << 10)
 #define CAN_U_IRQ_MASK			(1 << 11)
 #define CAN_L_IRQ_MASK			(1 << 12)
 #define UART1_IRQ_MASK			(1 << 13)
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index 5aa2d54ebfaa..2697e65adf86 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -15,9 +15,9 @@
 #include <linux/amba/pl061.h>
 #include <linux/ptrace.h>
 #include <asm/irq.h>
-#include <mach/generic.h>
-#include <mach/spear.h>
 #include <plat/shirq.h>
+#include <mach/generic.h>
+#include <mach/hardware.h>
 
 /* pad multiplexing support */
 /* muxing registers */
@@ -310,7 +310,7 @@ struct pmx_dev pmx_telecom_boot_pins = {
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_telecom_sdio_4bit_modes[] = {
+struct pmx_dev_mode pmx_telecom_sdhci_4bit_modes[] = {
 	{
 		.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
 			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
@@ -323,14 +323,14 @@ struct pmx_dev_mode pmx_telecom_sdio_4bit_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_telecom_sdio_4bit = {
-	.name = "telecom_sdio_4bit",
-	.modes = pmx_telecom_sdio_4bit_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_sdio_4bit_modes),
+struct pmx_dev pmx_telecom_sdhci_4bit = {
+	.name = "telecom_sdhci_4bit",
+	.modes = pmx_telecom_sdhci_4bit_modes,
+	.mode_count = ARRAY_SIZE(pmx_telecom_sdhci_4bit_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_telecom_sdio_8bit_modes[] = {
+struct pmx_dev_mode pmx_telecom_sdhci_8bit_modes[] = {
 	{
 		.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
 			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
@@ -342,10 +342,10 @@ struct pmx_dev_mode pmx_telecom_sdio_8bit_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_telecom_sdio_8bit = {
-	.name = "telecom_sdio_8bit",
-	.modes = pmx_telecom_sdio_8bit_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_sdio_8bit_modes),
+struct pmx_dev pmx_telecom_sdhci_8bit = {
+	.name = "telecom_sdhci_8bit",
+	.modes = pmx_telecom_sdhci_8bit_modes,
+	.mode_count = ARRAY_SIZE(pmx_telecom_sdhci_8bit_modes),
 	.enb_on_reset = 1,
 };
 
@@ -370,26 +370,6 @@ struct pmx_driver pmx_driver = {
 	.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
 };
 
-/* Add spear300 specific devices here */
-/* arm gpio1 device registration */
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-	.irq_base	= SPEAR_GPIO1_INT_BASE,
-};
-
-struct amba_device gpio1_device = {
-	.dev = {
-		.init_name = "gpio1",
-		.platform_data = &gpio1_plat_data,
-	},
-	.res = {
-		.start = SPEAR300_GPIO_BASE,
-		.end = SPEAR300_GPIO_BASE + SPEAR300_GPIO_SIZE - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {VIRQ_GPIO1, NO_IRQ},
-};
-
 /* spear3xx shared irq */
 struct shirq_dev_config shirq_ras1_config[] = {
 	{
@@ -443,6 +423,26 @@ struct spear_shirq shirq_ras1 = {
 	},
 };
 
+/* Add spear300 specific devices here */
+/* arm gpio1 device registration */
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= SPEAR_GPIO1_INT_BASE,
+};
+
+struct amba_device gpio1_device = {
+	.dev = {
+		.init_name = "gpio1",
+		.platform_data = &gpio1_plat_data,
+	},
+	.res = {
+		.start = SPEAR300_GPIO_BASE,
+		.end = SPEAR300_GPIO_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {VIRQ_GPIO1, NO_IRQ},
+};
+
 /* spear300 routines */
 void __init spear300_init(void)
 {
@@ -452,17 +452,21 @@ void __init spear300_init(void)
 	spear3xx_init();
 
 	/* shared irq registration */
-	shirq_ras1.regs.base =
-		ioremap(SPEAR300_TELECOM_BASE, SPEAR300_TELECOM_REG_SIZE);
+	shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SZ_4K);
 	if (shirq_ras1.regs.base) {
 		ret = spear_shirq_register(&shirq_ras1);
 		if (ret)
 			printk(KERN_ERR "Error registering Shared IRQ\n");
 	}
-}
 
-void spear300_pmx_init(void)
-{
-	spear_pmx_init(&pmx_driver, SPEAR300_SOC_CONFIG_BASE,
-			SPEAR300_SOC_CONFIG_SIZE);
+	/* pmx initialization */
+	pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
+	if (pmx_driver.base) {
+		ret = pmx_register(&pmx_driver);
+		if (ret)
+			printk(KERN_ERR "padmux: registeration failed. err no"
+					": %d\n", ret);
+		/* Free Mapping, device selection already done */
+		iounmap(pmx_driver.base);
+	}
 }
diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c
index bb21db152a23..42d2253ef540 100644
--- a/arch/arm/mach-spear3xx/spear300_evb.c
+++ b/arch/arm/mach-spear3xx/spear300_evb.c
@@ -14,7 +14,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
 
 /* padmux devices to enable */
 static struct pmx_dev *pmx_devs[] = {
@@ -28,7 +28,7 @@ static struct pmx_dev *pmx_devs[] = {
 	/* spear300 specific devices */
 	&pmx_fsmc_2_chips,
 	&pmx_clcd,
-	&pmx_telecom_sdio_4bit,
+	&pmx_telecom_sdhci_4bit,
 	&pmx_gpio1,
 };
 
@@ -51,14 +51,13 @@ static void __init spear300_evb_init(void)
 {
 	unsigned int i;
 
-	/* call spear300 machine init function */
-	spear300_init();
-
-	/* padmux initialization */
+	/* padmux initialization, must be done before spear300_init */
 	pmx_driver.mode = &photo_frame_mode;
 	pmx_driver.devs = pmx_devs;
 	pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
-	spear300_pmx_init();
+
+	/* call spear300 machine init function */
+	spear300_init();
 
 	/* Add Platform Devices */
 	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
@@ -72,6 +71,6 @@ MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
 	.boot_params	=	0x00000100,
 	.map_io		=	spear3xx_map_io,
 	.init_irq	=	spear3xx_init_irq,
-	.timer		=	&spear_sys_timer,
+	.timer		=	&spear3xx_timer,
 	.init_machine	=	spear300_evb_init,
 MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index 53b41b52d7ee..5c0a67b60c2a 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -13,9 +13,9 @@
 
 #include <linux/ptrace.h>
 #include <asm/irq.h>
-#include <mach/generic.h>
-#include <mach/spear.h>
 #include <plat/shirq.h>
+#include <mach/generic.h>
+#include <mach/hardware.h>
 
 /* pad multiplexing support */
 /* muxing registers */
@@ -139,8 +139,6 @@ struct pmx_driver pmx_driver = {
 	.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
 };
 
-/* Add spear310 specific devices here */
-
 /* spear3xx shared irq */
 struct shirq_dev_config shirq_ras1_config[] = {
 	{
@@ -257,6 +255,8 @@ struct spear_shirq shirq_intrcomm_ras = {
 	},
 };
 
+/* Add spear310 specific devices here */
+
 /* spear310 routines */
 void __init spear310_init(void)
 {
@@ -267,7 +267,7 @@ void __init spear310_init(void)
 	spear3xx_init();
 
 	/* shared irq registration */
-	base = ioremap(SPEAR310_SOC_CONFIG_BASE, SPEAR310_SOC_CONFIG_SIZE);
+	base = ioremap(SPEAR310_SOC_CONFIG_BASE, SZ_4K);
 	if (base) {
 		/* shirq 1 */
 		shirq_ras1.regs.base = base;
@@ -293,10 +293,11 @@ void __init spear310_init(void)
 		if (ret)
 			printk(KERN_ERR "Error registering Shared IRQ 4\n");
 	}
-}
 
-void spear310_pmx_init(void)
-{
-	spear_pmx_init(&pmx_driver, SPEAR310_SOC_CONFIG_BASE,
-			SPEAR310_SOC_CONFIG_SIZE);
+	/* pmx initialization */
+	pmx_driver.base = base;
+	ret = pmx_register(&pmx_driver);
+	if (ret)
+		printk(KERN_ERR "padmux: registeration failed. err no: %d\n",
+				ret);
 }
diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c
index 7facf6643199..2d7f333bd67b 100644
--- a/arch/arm/mach-spear3xx/spear310_evb.c
+++ b/arch/arm/mach-spear3xx/spear310_evb.c
@@ -14,7 +14,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
 
 /* padmux devices to enable */
 static struct pmx_dev *pmx_devs[] = {
@@ -58,14 +58,13 @@ static void __init spear310_evb_init(void)
 {
 	unsigned int i;
 
-	/* call spear310 machine init function */
-	spear310_init();
-
-	/* padmux initialization */
+	/* padmux initialization, must be done before spear310_init */
 	pmx_driver.mode = NULL;
 	pmx_driver.devs = pmx_devs;
 	pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
-	spear310_pmx_init();
+
+	/* call spear310 machine init function */
+	spear310_init();
 
 	/* Add Platform Devices */
 	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
@@ -79,6 +78,6 @@ MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
 	.boot_params	=	0x00000100,
 	.map_io		=	spear3xx_map_io,
 	.init_irq	=	spear3xx_init_irq,
-	.timer		=	&spear_sys_timer,
+	.timer		=	&spear3xx_timer,
 	.init_machine	=	spear310_evb_init,
 MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index 88b465284c36..741c1f414cbd 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -13,9 +13,9 @@
 
 #include <linux/ptrace.h>
 #include <asm/irq.h>
-#include <mach/generic.h>
-#include <mach/spear.h>
 #include <plat/shirq.h>
+#include <mach/generic.h>
+#include <mach/hardware.h>
 
 /* pad multiplexing support */
 /* muxing registers */
@@ -110,7 +110,7 @@ struct pmx_dev pmx_spp = {
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_sdio_modes[] = {
+struct pmx_dev_mode pmx_sdhci_modes[] = {
 	{
 		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE |
 			SMALL_PRINTERS_MODE,
@@ -118,10 +118,10 @@ struct pmx_dev_mode pmx_sdio_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_sdio = {
-	.name = "sdio",
-	.modes = pmx_sdio_modes,
-	.mode_count = ARRAY_SIZE(pmx_sdio_modes),
+struct pmx_dev pmx_sdhci = {
+	.name = "sdhci",
+	.modes = pmx_sdhci_modes,
+	.mode_count = ARRAY_SIZE(pmx_sdhci_modes),
 	.enb_on_reset = 1,
 };
 
@@ -215,17 +215,17 @@ struct pmx_dev pmx_can = {
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_sdio_led_modes[] = {
+struct pmx_dev_mode pmx_sdhci_led_modes[] = {
 	{
 		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
 		.mask = PMX_SSP_CS_MASK,
 	},
 };
 
-struct pmx_dev pmx_sdio_led = {
-	.name = "sdio_led",
-	.modes = pmx_sdio_led_modes,
-	.mode_count = ARRAY_SIZE(pmx_sdio_led_modes),
+struct pmx_dev pmx_sdhci_led = {
+	.name = "sdhci_led",
+	.modes = pmx_sdhci_led_modes,
+	.mode_count = ARRAY_SIZE(pmx_sdhci_led_modes),
 	.enb_on_reset = 1,
 };
 
@@ -384,8 +384,6 @@ struct pmx_driver pmx_driver = {
 	.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
 };
 
-/* Add spear320 specific devices here */
-
 /* spear3xx shared irq */
 struct shirq_dev_config shirq_ras1_config[] = {
 	{
@@ -510,6 +508,8 @@ struct spear_shirq shirq_intrcomm_ras = {
 	},
 };
 
+/* Add spear320 specific devices here */
+
 /* spear320 routines */
 void __init spear320_init(void)
 {
@@ -520,7 +520,7 @@ void __init spear320_init(void)
 	spear3xx_init();
 
 	/* shared irq registration */
-	base = ioremap(SPEAR320_SOC_CONFIG_BASE, SPEAR320_SOC_CONFIG_SIZE);
+	base = ioremap(SPEAR320_SOC_CONFIG_BASE, SZ_4K);
 	if (base) {
 		/* shirq 1 */
 		shirq_ras1.regs.base = base;
@@ -540,10 +540,11 @@ void __init spear320_init(void)
 		if (ret)
 			printk(KERN_ERR "Error registering Shared IRQ 4\n");
 	}
-}
 
-void spear320_pmx_init(void)
-{
-	spear_pmx_init(&pmx_driver, SPEAR320_SOC_CONFIG_BASE,
-			SPEAR320_SOC_CONFIG_SIZE);
+	/* pmx initialization */
+	pmx_driver.base = base;
+	ret = pmx_register(&pmx_driver);
+	if (ret)
+		printk(KERN_ERR "padmux: registeration failed. err no: %d\n",
+				ret);
 }
diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c
index 62ac685a4135..8213e4b66c14 100644
--- a/arch/arm/mach-spear3xx/spear320_evb.c
+++ b/arch/arm/mach-spear3xx/spear320_evb.c
@@ -14,7 +14,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
 
 /* padmux devices to enable */
 static struct pmx_dev *pmx_devs[] = {
@@ -26,7 +26,7 @@ static struct pmx_dev *pmx_devs[] = {
 
 	/* spear320 specific devices */
 	&pmx_fsmc,
-	&pmx_sdio,
+	&pmx_sdhci,
 	&pmx_i2s,
 	&pmx_uart1,
 	&pmx_uart2,
@@ -55,14 +55,13 @@ static void __init spear320_evb_init(void)
 {
 	unsigned int i;
 
-	/* call spear320 machine init function */
-	spear320_init();
-
-	/* padmux initialization */
+	/* padmux initialization, must be done before spear320_init */
 	pmx_driver.mode = &auto_net_mii_mode;
 	pmx_driver.devs = pmx_devs;
 	pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
-	spear320_pmx_init();
+
+	/* call spear320 machine init function */
+	spear320_init();
 
 	/* Add Platform Devices */
 	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
@@ -76,6 +75,6 @@ MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
 	.boot_params	=	0x00000100,
 	.map_io		=	spear3xx_map_io,
 	.init_irq	=	spear3xx_init_irq,
-	.timer		=	&spear_sys_timer,
+	.timer		=	&spear3xx_timer,
 	.init_machine	=	spear320_evb_init,
 MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index 52f553c8c46d..d3ba8ca1bc59 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -19,7 +19,7 @@
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
 
 /* Add spear3xx machines common devices here */
 /* gpio device registration */
@@ -35,7 +35,7 @@ struct amba_device gpio_device = {
 	},
 	.res = {
 		.start = SPEAR3XX_ICM3_GPIO_BASE,
-		.end = SPEAR3XX_ICM3_GPIO_BASE + SPEAR3XX_ICM3_GPIO_SIZE - 1,
+		.end = SPEAR3XX_ICM3_GPIO_BASE + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	.irq = {IRQ_BASIC_GPIO, NO_IRQ},
@@ -48,7 +48,7 @@ struct amba_device uart_device = {
 	},
 	.res = {
 		.start = SPEAR3XX_ICM1_UART_BASE,
-		.end = SPEAR3XX_ICM1_UART_BASE + SPEAR3XX_ICM1_UART_SIZE - 1,
+		.end = SPEAR3XX_ICM1_UART_BASE + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	.irq = {IRQ_UART, NO_IRQ},
@@ -71,22 +71,22 @@ struct map_desc spear3xx_io_desc[] __initdata = {
 	{
 		.virtual	= VA_SPEAR3XX_ICM1_UART_BASE,
 		.pfn		= __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE),
-		.length		= SPEAR3XX_ICM1_UART_SIZE,
+		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
 		.virtual	= VA_SPEAR3XX_ML1_VIC_BASE,
 		.pfn		= __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE),
-		.length		= SPEAR3XX_ML1_VIC_SIZE,
+		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
 		.virtual	= VA_SPEAR3XX_ICM3_SYS_CTRL_BASE,
 		.pfn		= __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE),
-		.length		= SPEAR3XX_ICM3_SYS_CTRL_SIZE,
+		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
 		.virtual	= VA_SPEAR3XX_ICM3_MISC_REG_BASE,
 		.pfn		= __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE),
-		.length		= SPEAR3XX_ICM3_MISC_REG_SIZE,
+		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	},
 };
@@ -523,26 +523,35 @@ struct pmx_dev pmx_plgpio_45_46_49_50 = {
 	.mode_count = ARRAY_SIZE(pmx_plgpio_45_46_49_50_modes),
 	.enb_on_reset = 1,
 };
+#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
 
-#endif
-
-/* spear padmux initialization function */
-void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size)
+static void __init spear3xx_timer_init(void)
 {
-	int ret = 0;
+	char pclk_name[] = "pll3_48m_clk";
+	struct clk *gpt_clk, *pclk;
+
+	/* get the system timer clock */
+	gpt_clk = clk_get_sys("gpt0", NULL);
+	if (IS_ERR(gpt_clk)) {
+		pr_err("%s:couldn't get clk for gpt\n", __func__);
+		BUG();
+	}
 
-	/* pad mux initialization */
-	pmx_driver->base = ioremap(base, size);
-	if (!pmx_driver->base) {
-		ret = -ENOMEM;
-		goto pmx_fail;
+	/* get the suitable parent clock for timer*/
+	pclk = clk_get(NULL, pclk_name);
+	if (IS_ERR(pclk)) {
+		pr_err("%s:couldn't get %s as parent for gpt\n",
+				__func__, pclk_name);
+		BUG();
 	}
 
-	ret = pmx_register(pmx_driver);
-	iounmap(pmx_driver->base);
+	clk_set_parent(gpt_clk, pclk);
+	clk_put(gpt_clk);
+	clk_put(pclk);
 
-pmx_fail:
-	if (ret)
-		printk(KERN_ERR "padmux: registration failed. err no: %d\n",
-				ret);
+	spear_setup_timer();
 }
+
+struct sys_timer spear3xx_timer = {
+	.init = spear3xx_timer_init,
+};