summaryrefslogtreecommitdiff
path: root/arch/arm/mach-s5pc100
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-s5pc100')
-rw-r--r--arch/arm/mach-s5pc100/Kconfig3
-rw-r--r--arch/arm/mach-s5pc100/Makefile.boot2
-rw-r--r--arch/arm/mach-s5pc100/clock.c209
-rw-r--r--arch/arm/mach-s5pc100/dma.c324
-rw-r--r--arch/arm/mach-s5pc100/include/mach/debug-macro.S2
-rw-r--r--arch/arm/mach-s5pc100/include/mach/dma.h4
-rw-r--r--arch/arm/mach-s5pc100/include/mach/gpio.h7
-rw-r--r--arch/arm/mach-s5pc100/include/mach/memory.h18
-rw-r--r--arch/arm/mach-s5pc100/include/mach/pwm-clock.h56
-rw-r--r--arch/arm/mach-s5pc100/include/mach/regs-fb.h105
-rw-r--r--arch/arm/mach-s5pc100/mach-smdkc100.c63
-rw-r--r--arch/arm/mach-s5pc100/setup-fb-24bpp.c1
-rw-r--r--arch/arm/mach-s5pc100/setup-sdhci.c42
13 files changed, 282 insertions, 554 deletions
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index 608722ff4f28..e538a4c67e9c 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -10,7 +10,7 @@ if ARCH_S5PC100
config CPU_S5PC100
bool
select S5P_EXT_INT
- select S3C_PL330_DMA
+ select SAMSUNG_DMADEV
help
Enable S5PC100 CPU support
@@ -56,6 +56,7 @@ config MACH_SMDKC100
select S3C_DEV_RTC
select S3C_DEV_WDT
select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_IDE
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
diff --git a/arch/arm/mach-s5pc100/Makefile.boot b/arch/arm/mach-s5pc100/Makefile.boot
index ff90aa13bd67..79ece4055b02 100644
--- a/arch/arm/mach-s5pc100/Makefile.boot
+++ b/arch/arm/mach-s5pc100/Makefile.boot
@@ -1,2 +1,2 @@
- zreladdr-y := 0x20008000
+ zreladdr-y += 0x20008000
params_phys-y := 0x20000100
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
index 0305e9b8282d..8d47709da713 100644
--- a/arch/arm/mach-s5pc100/clock.c
+++ b/arch/arm/mach-s5pc100/clock.c
@@ -31,6 +31,10 @@
static struct clk s5p_clk_otgphy = {
.name = "otg_phy",
+};
+
+static struct clk dummy_apb_pclk = {
+ .name = "apb_pclk",
.id = -1,
};
@@ -47,7 +51,6 @@ static struct clksrc_sources clk_src_mout_href = {
static struct clksrc_clk clk_mout_href = {
.clk = {
.name = "mout_href",
- .id = -1,
},
.sources = &clk_src_mout_href,
.reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 1 },
@@ -66,7 +69,6 @@ static struct clksrc_sources clk_src_mout_48m = {
static struct clksrc_clk clk_mout_48m = {
.clk = {
.name = "mout_48m",
- .id = -1,
},
.sources = &clk_src_mout_48m,
.reg_src = { .reg = S5P_CLK_SRC1, .shift = 24, .size = 1 },
@@ -75,7 +77,6 @@ static struct clksrc_clk clk_mout_48m = {
static struct clksrc_clk clk_mout_mpll = {
.clk = {
.name = "mout_mpll",
- .id = -1,
},
.sources = &clk_src_mpll,
.reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
@@ -85,7 +86,6 @@ static struct clksrc_clk clk_mout_mpll = {
static struct clksrc_clk clk_mout_apll = {
.clk = {
.name = "mout_apll",
- .id = -1,
},
.sources = &clk_src_apll,
.reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
@@ -94,7 +94,6 @@ static struct clksrc_clk clk_mout_apll = {
static struct clksrc_clk clk_mout_epll = {
.clk = {
.name = "mout_epll",
- .id = -1,
},
.sources = &clk_src_epll,
.reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
@@ -112,7 +111,6 @@ static struct clksrc_sources clk_src_mout_hpll = {
static struct clksrc_clk clk_mout_hpll = {
.clk = {
.name = "mout_hpll",
- .id = -1,
},
.sources = &clk_src_mout_hpll,
.reg_src = { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 },
@@ -121,7 +119,6 @@ static struct clksrc_clk clk_mout_hpll = {
static struct clksrc_clk clk_div_apll = {
.clk = {
.name = "div_apll",
- .id = -1,
.parent = &clk_mout_apll.clk,
},
.reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 1 },
@@ -130,7 +127,6 @@ static struct clksrc_clk clk_div_apll = {
static struct clksrc_clk clk_div_arm = {
.clk = {
.name = "div_arm",
- .id = -1,
.parent = &clk_div_apll.clk,
},
.reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 },
@@ -139,7 +135,6 @@ static struct clksrc_clk clk_div_arm = {
static struct clksrc_clk clk_div_d0_bus = {
.clk = {
.name = "div_d0_bus",
- .id = -1,
.parent = &clk_div_arm.clk,
},
.reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 3 },
@@ -148,7 +143,6 @@ static struct clksrc_clk clk_div_d0_bus = {
static struct clksrc_clk clk_div_pclkd0 = {
.clk = {
.name = "div_pclkd0",
- .id = -1,
.parent = &clk_div_d0_bus.clk,
},
.reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 3 },
@@ -157,7 +151,6 @@ static struct clksrc_clk clk_div_pclkd0 = {
static struct clksrc_clk clk_div_secss = {
.clk = {
.name = "div_secss",
- .id = -1,
.parent = &clk_div_d0_bus.clk,
},
.reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 3 },
@@ -166,7 +159,6 @@ static struct clksrc_clk clk_div_secss = {
static struct clksrc_clk clk_div_apll2 = {
.clk = {
.name = "div_apll2",
- .id = -1,
.parent = &clk_mout_apll.clk,
},
.reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 3 },
@@ -185,7 +177,6 @@ struct clksrc_sources clk_src_mout_am = {
static struct clksrc_clk clk_mout_am = {
.clk = {
.name = "mout_am",
- .id = -1,
},
.sources = &clk_src_mout_am,
.reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 1 },
@@ -194,7 +185,6 @@ static struct clksrc_clk clk_mout_am = {
static struct clksrc_clk clk_div_d1_bus = {
.clk = {
.name = "div_d1_bus",
- .id = -1,
.parent = &clk_mout_am.clk,
},
.reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 3 },
@@ -203,7 +193,6 @@ static struct clksrc_clk clk_div_d1_bus = {
static struct clksrc_clk clk_div_mpll2 = {
.clk = {
.name = "div_mpll2",
- .id = -1,
.parent = &clk_mout_am.clk,
},
.reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 1 },
@@ -212,7 +201,6 @@ static struct clksrc_clk clk_div_mpll2 = {
static struct clksrc_clk clk_div_mpll = {
.clk = {
.name = "div_mpll",
- .id = -1,
.parent = &clk_mout_am.clk,
},
.reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 2 },
@@ -231,7 +219,6 @@ struct clksrc_sources clk_src_mout_onenand = {
static struct clksrc_clk clk_mout_onenand = {
.clk = {
.name = "mout_onenand",
- .id = -1,
},
.sources = &clk_src_mout_onenand,
.reg_src = { .reg = S5P_CLK_SRC0, .shift = 24, .size = 1 },
@@ -240,7 +227,6 @@ static struct clksrc_clk clk_mout_onenand = {
static struct clksrc_clk clk_div_onenand = {
.clk = {
.name = "div_onenand",
- .id = -1,
.parent = &clk_mout_onenand.clk,
},
.reg_div = { .reg = S5P_CLK_DIV1, .shift = 20, .size = 2 },
@@ -249,7 +235,6 @@ static struct clksrc_clk clk_div_onenand = {
static struct clksrc_clk clk_div_pclkd1 = {
.clk = {
.name = "div_pclkd1",
- .id = -1,
.parent = &clk_div_d1_bus.clk,
},
.reg_div = { .reg = S5P_CLK_DIV1, .shift = 16, .size = 3 },
@@ -258,7 +243,6 @@ static struct clksrc_clk clk_div_pclkd1 = {
static struct clksrc_clk clk_div_cam = {
.clk = {
.name = "div_cam",
- .id = -1,
.parent = &clk_div_mpll2.clk,
},
.reg_div = { .reg = S5P_CLK_DIV1, .shift = 24, .size = 5 },
@@ -267,7 +251,6 @@ static struct clksrc_clk clk_div_cam = {
static struct clksrc_clk clk_div_hdmi = {
.clk = {
.name = "div_hdmi",
- .id = -1,
.parent = &clk_mout_hpll.clk,
},
.reg_div = { .reg = S5P_CLK_DIV3, .shift = 28, .size = 4 },
@@ -399,367 +382,329 @@ static int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
static struct clk init_clocks_off[] = {
{
.name = "cssys",
- .id = -1,
.parent = &clk_div_d0_bus.clk,
.enable = s5pc100_d0_0_ctrl,
.ctrlbit = (1 << 6),
}, {
.name = "secss",
- .id = -1,
.parent = &clk_div_d0_bus.clk,
.enable = s5pc100_d0_0_ctrl,
.ctrlbit = (1 << 5),
}, {
.name = "g2d",
- .id = -1,
.parent = &clk_div_d0_bus.clk,
.enable = s5pc100_d0_0_ctrl,
.ctrlbit = (1 << 4),
}, {
.name = "mdma",
- .id = -1,
.parent = &clk_div_d0_bus.clk,
.enable = s5pc100_d0_0_ctrl,
.ctrlbit = (1 << 3),
}, {
.name = "cfcon",
- .id = -1,
.parent = &clk_div_d0_bus.clk,
.enable = s5pc100_d0_0_ctrl,
.ctrlbit = (1 << 2),
}, {
.name = "nfcon",
- .id = -1,
.parent = &clk_div_d0_bus.clk,
.enable = s5pc100_d0_1_ctrl,
.ctrlbit = (1 << 3),
}, {
.name = "onenandc",
- .id = -1,
.parent = &clk_div_d0_bus.clk,
.enable = s5pc100_d0_1_ctrl,
.ctrlbit = (1 << 2),
}, {
.name = "sdm",
- .id = -1,
.parent = &clk_div_d0_bus.clk,
.enable = s5pc100_d0_2_ctrl,
.ctrlbit = (1 << 2),
}, {
.name = "seckey",
- .id = -1,
.parent = &clk_div_d0_bus.clk,
.enable = s5pc100_d0_2_ctrl,
.ctrlbit = (1 << 1),
}, {
.name = "hsmmc",
- .id = 2,
+ .devname = "s3c-sdhci.2",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_0_ctrl,
.ctrlbit = (1 << 7),
}, {
.name = "hsmmc",
- .id = 1,
+ .devname = "s3c-sdhci.1",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_0_ctrl,
.ctrlbit = (1 << 6),
}, {
.name = "hsmmc",
- .id = 0,
+ .devname = "s3c-sdhci.0",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_0_ctrl,
.ctrlbit = (1 << 5),
}, {
.name = "modemif",
- .id = -1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_0_ctrl,
.ctrlbit = (1 << 4),
}, {
.name = "otg",
- .id = -1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_0_ctrl,
.ctrlbit = (1 << 3),
}, {
.name = "usbhost",
- .id = -1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_0_ctrl,
.ctrlbit = (1 << 2),
}, {
- .name = "pdma",
- .id = 1,
+ .name = "dma",
+ .devname = "dma-pl330.1",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_0_ctrl,
.ctrlbit = (1 << 1),
}, {
- .name = "pdma",
- .id = 0,
+ .name = "dma",
+ .devname = "dma-pl330.0",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_0_ctrl,
.ctrlbit = (1 << 0),
}, {
.name = "lcd",
- .id = -1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_1_ctrl,
.ctrlbit = (1 << 0),
}, {
.name = "rotator",
- .id = -1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_1_ctrl,
.ctrlbit = (1 << 1),
}, {
.name = "fimc",
- .id = 0,
+ .devname = "s5p-fimc.0",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_1_ctrl,
.ctrlbit = (1 << 2),
}, {
.name = "fimc",
- .id = 1,
+ .devname = "s5p-fimc.1",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_1_ctrl,
.ctrlbit = (1 << 3),
}, {
.name = "fimc",
- .id = 2,
- .parent = &clk_div_d1_bus.clk,
+ .devname = "s5p-fimc.2",
.enable = s5pc100_d1_1_ctrl,
.ctrlbit = (1 << 4),
}, {
.name = "jpeg",
- .id = -1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_1_ctrl,
.ctrlbit = (1 << 5),
}, {
.name = "mipi-dsim",
- .id = -1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_1_ctrl,
.ctrlbit = (1 << 6),
}, {
.name = "mipi-csis",
- .id = -1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_1_ctrl,
.ctrlbit = (1 << 7),
}, {
.name = "g3d",
- .id = 0,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_0_ctrl,
.ctrlbit = (1 << 8),
}, {
.name = "tv",
- .id = -1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_2_ctrl,
.ctrlbit = (1 << 0),
}, {
.name = "vp",
- .id = -1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_2_ctrl,
.ctrlbit = (1 << 1),
}, {
.name = "mixer",
- .id = -1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_2_ctrl,
.ctrlbit = (1 << 2),
}, {
.name = "hdmi",
- .id = -1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_2_ctrl,
.ctrlbit = (1 << 3),
}, {
.name = "mfc",
- .id = -1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_2_ctrl,
.ctrlbit = (1 << 4),
}, {
.name = "apc",
- .id = -1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_3_ctrl,
.ctrlbit = (1 << 2),
}, {
.name = "iec",
- .id = -1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_3_ctrl,
.ctrlbit = (1 << 3),
}, {
.name = "systimer",
- .id = -1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_3_ctrl,
.ctrlbit = (1 << 7),
}, {
.name = "watchdog",
- .id = -1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_3_ctrl,
.ctrlbit = (1 << 8),
}, {
.name = "rtc",
- .id = -1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_3_ctrl,
.ctrlbit = (1 << 9),
}, {
.name = "i2c",
- .id = 0,
+ .devname = "s3c2440-i2c.0",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_4_ctrl,
.ctrlbit = (1 << 4),
}, {
.name = "i2c",
- .id = 1,
+ .devname = "s3c2440-i2c.1",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_4_ctrl,
.ctrlbit = (1 << 5),
}, {
.name = "spi",
- .id = 0,
+ .devname = "s3c64xx-spi.0",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_4_ctrl,
.ctrlbit = (1 << 6),
}, {
.name = "spi",
- .id = 1,
+ .devname = "s3c64xx-spi.1",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_4_ctrl,
.ctrlbit = (1 << 7),
}, {
.name = "spi",
- .id = 2,
+ .devname = "s3c64xx-spi.2",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_4_ctrl,
.ctrlbit = (1 << 8),
}, {
.name = "irda",
- .id = -1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_4_ctrl,
.ctrlbit = (1 << 9),
}, {
.name = "ccan",
- .id = 0,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_4_ctrl,
.ctrlbit = (1 << 10),
}, {
.name = "ccan",
- .id = 1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_4_ctrl,
.ctrlbit = (1 << 11),
}, {
.name = "hsitx",
- .id = -1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_4_ctrl,
.ctrlbit = (1 << 12),
}, {
.name = "hsirx",
- .id = -1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_4_ctrl,
.ctrlbit = (1 << 13),
}, {
.name = "iis",
- .id = 0,
+ .devname = "samsung-i2s.0",
.parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 0),
}, {
.name = "iis",
- .id = 1,
+ .devname = "samsung-i2s.1",
.parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 1),
}, {
.name = "iis",
- .id = 2,
+ .devname = "samsung-i2s.2",
.parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 2),
}, {
.name = "ac97",
- .id = -1,
.parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 3),
}, {
.name = "pcm",
- .id = 0,
+ .devname = "samsung-pcm.0",
.parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 4),
}, {
.name = "pcm",
- .id = 1,
+ .devname = "samsung-pcm.1",
.parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 5),
}, {
.name = "spdif",
- .id = -1,
.parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 6),
}, {
.name = "adc",
- .id = -1,
.parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 7),
}, {
.name = "keypad",
- .id = -1,
.parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 8),
}, {
.name = "spi_48m",
- .id = 0,
+ .devname = "s3c64xx-spi.0",
.parent = &clk_mout_48m.clk,
.enable = s5pc100_sclk0_ctrl,
.ctrlbit = (1 << 7),
}, {
.name = "spi_48m",
- .id = 1,
+ .devname = "s3c64xx-spi.1",
.parent = &clk_mout_48m.clk,
.enable = s5pc100_sclk0_ctrl,
.ctrlbit = (1 << 8),
}, {
.name = "spi_48m",
- .id = 2,
+ .devname = "s3c64xx-spi.2",
.parent = &clk_mout_48m.clk,
.enable = s5pc100_sclk0_ctrl,
.ctrlbit = (1 << 9),
}, {
.name = "mmc_48m",
- .id = 0,
+ .devname = "s3c-sdhci.0",
.parent = &clk_mout_48m.clk,
.enable = s5pc100_sclk0_ctrl,
.ctrlbit = (1 << 15),
}, {
.name = "mmc_48m",
- .id = 1,
+ .devname = "s3c-sdhci.1",
.parent = &clk_mout_48m.clk,
.enable = s5pc100_sclk0_ctrl,
.ctrlbit = (1 << 16),
}, {
.name = "mmc_48m",
- .id = 2,
+ .devname = "s3c-sdhci.2",
.parent = &clk_mout_48m.clk,
.enable = s5pc100_sclk0_ctrl,
.ctrlbit = (1 << 17),
@@ -768,33 +713,27 @@ static struct clk init_clocks_off[] = {
static struct clk clk_vclk54m = {
.name = "vclk_54m",
- .id = -1,
.rate = 54000000,
};
static struct clk clk_i2scdclk0 = {
.name = "i2s_cdclk0",
- .id = -1,
};
static struct clk clk_i2scdclk1 = {
.name = "i2s_cdclk1",
- .id = -1,
};
static struct clk clk_i2scdclk2 = {
.name = "i2s_cdclk2",
- .id = -1,
};
static struct clk clk_pcmcdclk0 = {
.name = "pcm_cdclk0",
- .id = -1,
};
static struct clk clk_pcmcdclk1 = {
.name = "pcm_cdclk1",
- .id = -1,
};
static struct clk *clk_src_group1_list[] = {
@@ -836,7 +775,7 @@ struct clksrc_sources clk_src_group3 = {
static struct clksrc_clk clk_sclk_audio0 = {
.clk = {
.name = "sclk_audio",
- .id = 0,
+ .devname = "samsung-pcm.0",
.ctrlbit = (1 << 8),
.enable = s5pc100_sclk1_ctrl,
},
@@ -862,7 +801,7 @@ struct clksrc_sources clk_src_group4 = {
static struct clksrc_clk clk_sclk_audio1 = {
.clk = {
.name = "sclk_audio",
- .id = 1,
+ .devname = "samsung-pcm.1",
.ctrlbit = (1 << 9),
.enable = s5pc100_sclk1_ctrl,
},
@@ -887,7 +826,7 @@ struct clksrc_sources clk_src_group5 = {
static struct clksrc_clk clk_sclk_audio2 = {
.clk = {
.name = "sclk_audio",
- .id = 2,
+ .devname = "samsung-pcm.2",
.ctrlbit = (1 << 10),
.enable = s5pc100_sclk1_ctrl,
},
@@ -976,48 +915,12 @@ struct clksrc_sources clk_src_sclk_spdif = {
.nr_sources = ARRAY_SIZE(clk_sclk_spdif_list),
};
-static int s5pc100_spdif_set_rate(struct clk *clk, unsigned long rate)
-{
- struct clk *pclk;
- int ret;
-
- pclk = clk_get_parent(clk);
- if (IS_ERR(pclk))
- return -EINVAL;
-
- ret = pclk->ops->set_rate(pclk, rate);
- clk_put(pclk);
-
- return ret;
-}
-
-static unsigned long s5pc100_spdif_get_rate(struct clk *clk)
-{
- struct clk *pclk;
- int rate;
-
- pclk = clk_get_parent(clk);
- if (IS_ERR(pclk))
- return -EINVAL;
-
- rate = pclk->ops->get_rate(clk);
- clk_put(pclk);
-
- return rate;
-}
-
-static struct clk_ops s5pc100_sclk_spdif_ops = {
- .set_rate = s5pc100_spdif_set_rate,
- .get_rate = s5pc100_spdif_get_rate,
-};
-
static struct clksrc_clk clk_sclk_spdif = {
.clk = {
.name = "sclk_spdif",
- .id = -1,
.ctrlbit = (1 << 11),
.enable = s5pc100_sclk1_ctrl,
- .ops = &s5pc100_sclk_spdif_ops,
+ .ops = &s5p_sclk_spdif_ops,
},
.sources = &clk_src_sclk_spdif,
.reg_src = { .reg = S5P_CLK_SRC3, .shift = 24, .size = 2 },
@@ -1027,7 +930,7 @@ static struct clksrc_clk clksrcs[] = {
{
.clk = {
.name = "sclk_spi",
- .id = 0,
+ .devname = "s3c64xx-spi.0",
.ctrlbit = (1 << 4),
.enable = s5pc100_sclk0_ctrl,
@@ -1038,7 +941,7 @@ static struct clksrc_clk clksrcs[] = {
}, {
.clk = {
.name = "sclk_spi",
- .id = 1,
+ .devname = "s3c64xx-spi.1",
.ctrlbit = (1 << 5),
.enable = s5pc100_sclk0_ctrl,
@@ -1049,7 +952,7 @@ static struct clksrc_clk clksrcs[] = {
}, {
.clk = {
.name = "sclk_spi",
- .id = 2,
+ .devname = "s3c64xx-spi.2",
.ctrlbit = (1 << 6),
.enable = s5pc100_sclk0_ctrl,
@@ -1060,7 +963,6 @@ static struct clksrc_clk clksrcs[] = {
}, {
.clk = {
.name = "uclk1",
- .id = -1,
.ctrlbit = (1 << 3),
.enable = s5pc100_sclk0_ctrl,
@@ -1071,7 +973,6 @@ static struct clksrc_clk clksrcs[] = {
}, {
.clk = {
.name = "sclk_mixer",
- .id = -1,
.ctrlbit = (1 << 6),
.enable = s5pc100_sclk0_ctrl,
@@ -1081,7 +982,6 @@ static struct clksrc_clk clksrcs[] = {
}, {
.clk = {
.name = "sclk_lcd",
- .id = -1,
.ctrlbit = (1 << 0),
.enable = s5pc100_sclk1_ctrl,
@@ -1092,7 +992,7 @@ static struct clksrc_clk clksrcs[] = {
}, {
.clk = {
.name = "sclk_fimc",
- .id = 0,
+ .devname = "s5p-fimc.0",
.ctrlbit = (1 << 1),
.enable = s5pc100_sclk1_ctrl,
@@ -1103,7 +1003,7 @@ static struct clksrc_clk clksrcs[] = {
}, {
.clk = {
.name = "sclk_fimc",
- .id = 1,
+ .devname = "s5p-fimc.1",
.ctrlbit = (1 << 2),
.enable = s5pc100_sclk1_ctrl,
@@ -1114,7 +1014,7 @@ static struct clksrc_clk clksrcs[] = {
}, {
.clk = {
.name = "sclk_fimc",
- .id = 2,
+ .devname = "s5p-fimc.2",
.ctrlbit = (1 << 3),
.enable = s5pc100_sclk1_ctrl,
@@ -1125,7 +1025,7 @@ static struct clksrc_clk clksrcs[] = {
}, {
.clk = {
.name = "sclk_mmc",
- .id = 0,
+ .devname = "s3c-sdhci.0",
.ctrlbit = (1 << 12),
.enable = s5pc100_sclk1_ctrl,
@@ -1136,7 +1036,7 @@ static struct clksrc_clk clksrcs[] = {
}, {
.clk = {
.name = "sclk_mmc",
- .id = 1,
+ .devname = "s3c-sdhci.1",
.ctrlbit = (1 << 13),
.enable = s5pc100_sclk1_ctrl,
@@ -1147,7 +1047,7 @@ static struct clksrc_clk clksrcs[] = {
}, {
.clk = {
.name = "sclk_mmc",
- .id = 2,
+ .devname = "s3c-sdhci.2",
.ctrlbit = (1 << 14),
.enable = s5pc100_sclk1_ctrl,
@@ -1158,7 +1058,6 @@ static struct clksrc_clk clksrcs[] = {
}, {
.clk = {
.name = "sclk_irda",
- .id = 2,
.ctrlbit = (1 << 10),
.enable = s5pc100_sclk0_ctrl,
@@ -1169,7 +1068,6 @@ static struct clksrc_clk clksrcs[] = {
}, {
.clk = {
.name = "sclk_irda",
- .id = -1,
.ctrlbit = (1 << 10),
.enable = s5pc100_sclk0_ctrl,
@@ -1180,7 +1078,6 @@ static struct clksrc_clk clksrcs[] = {
}, {
.clk = {
.name = "sclk_pwi",
- .id = -1,
.ctrlbit = (1 << 1),
.enable = s5pc100_sclk0_ctrl,
@@ -1191,7 +1088,6 @@ static struct clksrc_clk clksrcs[] = {
}, {
.clk = {
.name = "sclk_uhost",
- .id = -1,
.ctrlbit = (1 << 11),
.enable = s5pc100_sclk0_ctrl,
@@ -1291,79 +1187,70 @@ void __init_or_cpufreq s5pc100_setup_clocks(void)
static struct clk init_clocks[] = {
{
.name = "tzic",
- .id = -1,
.parent = &clk_div_d0_bus.clk,
.enable = s5pc100_d0_0_ctrl,
.ctrlbit = (1 << 1),
}, {
.name = "intc",
- .id = -1,
.parent = &clk_div_d0_bus.clk,
.enable = s5pc100_d0_0_ctrl,
.ctrlbit = (1 << 0),
}, {
.name = "ebi",
- .id = -1,
.parent = &clk_div_d0_bus.clk,
.enable = s5pc100_d0_1_ctrl,
.ctrlbit = (1 << 5),
}, {
.name = "intmem",
- .id = -1,
.parent = &clk_div_d0_bus.clk,
.enable = s5pc100_d0_1_ctrl,
.ctrlbit = (1 << 4),
}, {
.name = "sromc",
- .id = -1,
.parent = &clk_div_d0_bus.clk,
.enable = s5pc100_d0_1_ctrl,
.ctrlbit = (1 << 1),
}, {
.name = "dmc",
- .id = -1,
.parent = &clk_div_d0_bus.clk,
.enable = s5pc100_d0_1_ctrl,
.ctrlbit = (1 << 0),
}, {
.name = "chipid",
- .id = -1,
.parent = &clk_div_d0_bus.clk,
.enable = s5pc100_d0_1_ctrl,
.ctrlbit = (1 << 0),
}, {
.name = "gpio",
- .id = -1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_3_ctrl,
.ctrlbit = (1 << 1),
}, {
.name = "uart",
- .id = 0,
+ .devname = "s3c6400-uart.0",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_4_ctrl,
.ctrlbit = (1 << 0),
}, {
.name = "uart",
- .id = 1,
+ .devname = "s3c6400-uart.1",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_4_ctrl,
.ctrlbit = (1 << 1),
}, {
.name = "uart",
- .id = 2,
+ .devname = "s3c6400-uart.2",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_4_ctrl,
.ctrlbit = (1 << 2),
}, {
.name = "uart",
- .id = 3,
+ .devname = "s3c6400-uart.3",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_4_ctrl,
.ctrlbit = (1 << 3),
}, {
.name = "timers",
- .id = -1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_3_ctrl,
.ctrlbit = (1 << 6),
@@ -1394,5 +1281,7 @@ void __init s5pc100_register_clocks(void)
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c24xx_register_clock(&dummy_apb_pclk);
+
s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c
index bf4cd0fb97c6..065a087f5a8b 100644
--- a/arch/arm/mach-s5pc100/dma.c
+++ b/arch/arm/mach-s5pc100/dma.c
@@ -1,4 +1,8 @@
-/*
+/* linux/arch/arm/mach-s5pc100/dma.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
* Copyright (C) 2010 Samsung Electronics Co. Ltd.
* Jaswinder Singh <jassi.brar@samsung.com>
*
@@ -17,150 +21,246 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
+#include <asm/irq.h>
#include <plat/devs.h>
+#include <plat/irqs.h>
#include <mach/map.h>
#include <mach/irqs.h>
-
-#include <plat/s3c-pl330-pdata.h>
+#include <mach/dma.h>
static u64 dma_dmamask = DMA_BIT_MASK(32);
-static struct resource s5pc100_pdma0_resource[] = {
- [0] = {
- .start = S5PC100_PA_PDMA0,
- .end = S5PC100_PA_PDMA0 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_PDMA0,
- .end = IRQ_PDMA0,
- .flags = IORESOURCE_IRQ,
+struct dma_pl330_peri pdma0_peri[30] = {
+ {
+ .peri_id = (u8)DMACH_UART0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART3_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART3_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = DMACH_IRDA,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0S_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_AC97_MICIN,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_AC97_PCMIN,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_AC97_PCMOUT,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_EXTERNAL,
+ }, {
+ .peri_id = (u8)DMACH_PWM,
+ }, {
+ .peri_id = (u8)DMACH_SPDIF,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_HSI_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_HSI_TX,
+ .rqtype = MEMTODEV,
},
};
-static struct s3c_pl330_platdata s5pc100_pdma0_pdata = {
- .peri = {
- [0] = DMACH_UART0_RX,
- [1] = DMACH_UART0_TX,
- [2] = DMACH_UART1_RX,
- [3] = DMACH_UART1_TX,
- [4] = DMACH_UART2_RX,
- [5] = DMACH_UART2_TX,
- [6] = DMACH_UART3_RX,
- [7] = DMACH_UART3_TX,
- [8] = DMACH_IRDA,
- [9] = DMACH_I2S0_RX,
- [10] = DMACH_I2S0_TX,
- [11] = DMACH_I2S0S_TX,
- [12] = DMACH_I2S1_RX,
- [13] = DMACH_I2S1_TX,
- [14] = DMACH_I2S2_RX,
- [15] = DMACH_I2S2_TX,
- [16] = DMACH_SPI0_RX,
- [17] = DMACH_SPI0_TX,
- [18] = DMACH_SPI1_RX,
- [19] = DMACH_SPI1_TX,
- [20] = DMACH_SPI2_RX,
- [21] = DMACH_SPI2_TX,
- [22] = DMACH_AC97_MICIN,
- [23] = DMACH_AC97_PCMIN,
- [24] = DMACH_AC97_PCMOUT,
- [25] = DMACH_EXTERNAL,
- [26] = DMACH_PWM,
- [27] = DMACH_SPDIF,
- [28] = DMACH_HSI_RX,
- [29] = DMACH_HSI_TX,
- [30] = DMACH_MAX,
- [31] = DMACH_MAX,
- },
+struct dma_pl330_platdata s5pc100_pdma0_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(pdma0_peri),
+ .peri = pdma0_peri,
};
-static struct platform_device s5pc100_device_pdma0 = {
- .name = "s3c-pl330",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5pc100_pdma0_resource),
- .resource = s5pc100_pdma0_resource,
- .dev = {
+struct amba_device s5pc100_device_pdma0 = {
+ .dev = {
+ .init_name = "dma-pl330.0",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pc100_pdma0_pdata,
},
-};
-
-static struct resource s5pc100_pdma1_resource[] = {
- [0] = {
- .start = S5PC100_PA_PDMA1,
- .end = S5PC100_PA_PDMA1 + SZ_4K,
+ .res = {
+ .start = S5PC100_PA_PDMA0,
+ .end = S5PC100_PA_PDMA0 + SZ_4K,
.flags = IORESOURCE_MEM,
},
- [1] = {
- .start = IRQ_PDMA1,
- .end = IRQ_PDMA1,
- .flags = IORESOURCE_IRQ,
- },
+ .irq = {IRQ_PDMA0, NO_IRQ},
+ .periphid = 0x00041330,
};
-static struct s3c_pl330_platdata s5pc100_pdma1_pdata = {
- .peri = {
- [0] = DMACH_UART0_RX,
- [1] = DMACH_UART0_TX,
- [2] = DMACH_UART1_RX,
- [3] = DMACH_UART1_TX,
- [4] = DMACH_UART2_RX,
- [5] = DMACH_UART2_TX,
- [6] = DMACH_UART3_RX,
- [7] = DMACH_UART3_TX,
- [8] = DMACH_IRDA,
- [9] = DMACH_I2S0_RX,
- [10] = DMACH_I2S0_TX,
- [11] = DMACH_I2S0S_TX,
- [12] = DMACH_I2S1_RX,
- [13] = DMACH_I2S1_TX,
- [14] = DMACH_I2S2_RX,
- [15] = DMACH_I2S2_TX,
- [16] = DMACH_SPI0_RX,
- [17] = DMACH_SPI0_TX,
- [18] = DMACH_SPI1_RX,
- [19] = DMACH_SPI1_TX,
- [20] = DMACH_SPI2_RX,
- [21] = DMACH_SPI2_TX,
- [22] = DMACH_PCM0_RX,
- [23] = DMACH_PCM0_TX,
- [24] = DMACH_PCM1_RX,
- [25] = DMACH_PCM1_TX,
- [26] = DMACH_MSM_REQ0,
- [27] = DMACH_MSM_REQ1,
- [28] = DMACH_MSM_REQ2,
- [29] = DMACH_MSM_REQ3,
- [30] = DMACH_MAX,
- [31] = DMACH_MAX,
+struct dma_pl330_peri pdma1_peri[30] = {
+ {
+ .peri_id = (u8)DMACH_UART0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_UART3_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_UART3_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = DMACH_IRDA,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S0S_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_I2S2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_I2S2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI0_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_SPI2_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_SPI2_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM0_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_PCM1_RX,
+ .rqtype = DEVTOMEM,
+ }, {
+ .peri_id = (u8)DMACH_PCM1_TX,
+ .rqtype = MEMTODEV,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ0,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ1,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ2,
+ }, {
+ .peri_id = (u8)DMACH_MSM_REQ3,
},
};
-static struct platform_device s5pc100_device_pdma1 = {
- .name = "s3c-pl330",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5pc100_pdma1_resource),
- .resource = s5pc100_pdma1_resource,
- .dev = {
+struct dma_pl330_platdata s5pc100_pdma1_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(pdma1_peri),
+ .peri = pdma1_peri,
+};
+
+struct amba_device s5pc100_device_pdma1 = {
+ .dev = {
+ .init_name = "dma-pl330.1",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pc100_pdma1_pdata,
},
-};
-
-static struct platform_device *s5pc100_dmacs[] __initdata = {
- &s5pc100_device_pdma0,
- &s5pc100_device_pdma1,
+ .res = {
+ .start = S5PC100_PA_PDMA1,
+ .end = S5PC100_PA_PDMA1 + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_PDMA1, NO_IRQ},
+ .periphid = 0x00041330,
};
static int __init s5pc100_dma_init(void)
{
- platform_add_devices(s5pc100_dmacs, ARRAY_SIZE(s5pc100_dmacs));
+ amba_device_register(&s5pc100_device_pdma0, &iomem_resource);
+ amba_device_register(&s5pc100_device_pdma1, &iomem_resource);
return 0;
}
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
index b2ba95ddf8e0..694f75937000 100644
--- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -22,7 +22,7 @@
* aligned and add in the offset when we load the value here.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, = S3C_PA_UART
ldr \rv, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-s5pc100/include/mach/dma.h b/arch/arm/mach-s5pc100/include/mach/dma.h
index 81209eb1409b..201842a3769e 100644
--- a/arch/arm/mach-s5pc100/include/mach/dma.h
+++ b/arch/arm/mach-s5pc100/include/mach/dma.h
@@ -20,7 +20,7 @@
#ifndef __MACH_DMA_H
#define __MACH_DMA_H
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+/* This platform uses the common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
index 29a8a12d9b4f..5e1a924b595f 100644
--- a/arch/arm/mach-s5pc100/include/mach/gpio.h
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -15,11 +15,6 @@
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H __FILE__
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
/* GPIO bank sizes */
#define S5PC100_GPIO_A0_NR (8)
#define S5PC100_GPIO_A1_NR (5)
@@ -146,6 +141,4 @@ enum s5p_gpio_number {
/* define the number of gpios we need to the one after the MP04() range */
#define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1)
-#include <asm-generic/gpio.h>
-
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/memory.h b/arch/arm/mach-s5pc100/include/mach/memory.h
deleted file mode 100644
index bda4e79fd5fc..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/memory.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/memory.h
- *
- * Copyright 2008 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * Based on mach-s3c6400/include/mach/memory.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x20000000)
-
-#endif
diff --git a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
deleted file mode 100644
index b34d2f7aae52..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - pwm clock and timer support
- *
- * Based on mach-s3c6400/include/mach/pwm-clock.h
- */
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
- return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
- return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
- return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
- return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-fb.h b/arch/arm/mach-s5pc100/include/mach/regs-fb.h
deleted file mode 100644
index 07aa4d6054fe..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/regs-fb.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/regs-fb.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Pawel Osciak <p.osciak@samsung.com>
- *
- * Framebuffer register definitions for Samsung S5PC100.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_FB_H
-#define __ASM_ARCH_REGS_FB_H __FILE__
-
-#include <plat/regs-fb-v4.h>
-
-/* VP1 interface timing control */
-#define VP1CON0 (0x118)
-#define VP1_RATECON_EN (1 << 31)
-#define VP1_CLKRATE_MASK (0xff)
-
-#define VP1CON1 (0x11c)
-#define VP1_VTREGCON_EN (1 << 31)
-#define VP1_VBPD_MASK (0xfff)
-#define VP1_VBPD_SHIFT (16)
-
-
-#define WPALCON_H (0x19c)
-#define WPALCON_L (0x1a0)
-
-/* Palette control for WPAL0 and WPAL1 is the same as in S3C64xx, but
- * different for WPAL2-4
- */
-/* In WPALCON_L (aka WPALCON) */
-#define WPALCON_W1PAL_32BPP_A888 (0x7 << 3)
-#define WPALCON_W0PAL_32BPP_A888 (0x7 << 0)
-
-/* To set W2PAL-W4PAL consist of one bit from WPALCON_L and two from WPALCON_H,
- * e.g. W2PAL[2..0] is made of (WPALCON_H[10..9], WPALCON_L[6]).
- */
-#define WPALCON_L_WxPAL_L_MASK (0x1)
-#define WPALCON_L_W2PAL_L_SHIFT (6)
-#define WPALCON_L_W3PAL_L_SHIFT (7)
-#define WPALCON_L_W4PAL_L_SHIFT (8)
-
-#define WPALCON_L_WxPAL_H_MASK (0x3)
-#define WPALCON_H_W2PAL_H_SHIFT (9)
-#define WPALCON_H_W3PAL_H_SHIFT (13)
-#define WPALCON_H_W4PAL_H_SHIFT (17)
-
-/* Per-window alpha value registers */
-/* For window 0 8-bit alpha values are in VIDW0ALPHAx,
- * for windows 1-4 alpha values consist of two parts, the 4 low bits are
- * taken from VIDWxALPHAx and 4 high bits are from VIDOSDxC,
- * e.g. WIN1_ALPHA0_B[7..0] = (VIDOSD1C[3..0], VIDW1ALPHA0[3..0])
- */
-#define VIDWxALPHA0(_win) (0x200 + (_win * 8))
-#define VIDWxALPHA1(_win) (0x204 + (_win * 8))
-
-/* Only for window 0 in VIDW0ALPHAx. */
-#define VIDW0ALPHAx_R(_x) ((_x) << 16)
-#define VIDW0ALPHAx_R_MASK (0xff << 16)
-#define VIDW0ALPHAx_R_SHIFT (16)
-#define VIDW0ALPHAx_G(_x) ((_x) << 8)
-#define VIDW0ALPHAx_G_MASK (0xff << 8)
-#define VIDW0ALPHAx_G_SHIFT (8)
-#define VIDW0ALPHAx_B(_x) ((_x) << 0)
-#define VIDW0ALPHAx_B_MASK (0xff << 0)
-#define VIDW0ALPHAx_B_SHIFT (0)
-
-/* Low 4 bits of alpha0-1 for windows 1-4 */
-#define VIDW14ALPHAx_R_L(_x) ((_x) << 16)
-#define VIDW14ALPHAx_R_L_MASK (0xf << 16)
-#define VIDW14ALPHAx_R_L_SHIFT (16)
-#define VIDW14ALPHAx_G_L(_x) ((_x) << 8)
-#define VIDW14ALPHAx_G_L_MASK (0xf << 8)
-#define VIDW14ALPHAx_G_L_SHIFT (8)
-#define VIDW14ALPHAx_B_L(_x) ((_x) << 0)
-#define VIDW14ALPHAx_B_L_MASK (0xf << 0)
-#define VIDW14ALPHAx_B_L_SHIFT (0)
-
-
-/* Per-window blending equation control registers */
-#define BLENDEQx(_win) (0x244 + ((_win) * 4))
-#define BLENDEQ1 (0x244)
-#define BLENDEQ2 (0x248)
-#define BLENDEQ3 (0x24c)
-#define BLENDEQ4 (0x250)
-
-#define BLENDEQx_Q_FUNC(_x) ((_x) << 18)
-#define BLENDEQx_Q_FUNC_MASK (0xf << 18)
-#define BLENDEQx_P_FUNC(_x) ((_x) << 12)
-#define BLENDEQx_P_FUNC_MASK (0xf << 12)
-#define BLENDEQx_B_FUNC(_x) ((_x) << 6)
-#define BLENDEQx_B_FUNC_MASK (0xf << 6)
-#define BLENDEQx_A_FUNC(_x) ((_x) << 0)
-#define BLENDEQx_A_FUNC_MASK (0xf << 0)
-
-#define BLENDCON (0x260)
-#define BLENDCON_8BIT_ALPHA (1 << 0)
-
-
-#endif /* __ASM_ARCH_REGS_FB_H */
-
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 0525cb3ef406..26f5c91c9427 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -29,7 +29,6 @@
#include <asm/mach/map.h>
#include <mach/map.h>
-#include <mach/regs-fb.h>
#include <mach/regs-gpio.h>
#include <video/platform_lcd.h>
@@ -51,6 +50,8 @@
#include <plat/keypad.h>
#include <plat/ts.h>
#include <plat/audio.h>
+#include <plat/backlight.h>
+#include <plat/regs-fb-v4.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -179,45 +180,6 @@ static struct samsung_keypad_platdata smdkc100_keypad_data __initdata = {
.cols = 8,
};
-static int smdkc100_backlight_init(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(S5PC100_GPD(0), "Backlight");
- if (ret) {
- printk(KERN_ERR "failed to request GPF for PWM-OUT0\n");
- return ret;
- }
-
- /* Configure GPIO pin with S5PC100_GPD_TOUT_0 */
- s3c_gpio_cfgpin(S5PC100_GPD(0), S3C_GPIO_SFN(2));
-
- return 0;
-}
-
-static void smdkc100_backlight_exit(struct device *dev)
-{
- s3c_gpio_cfgpin(S5PC100_GPD(0), S3C_GPIO_OUTPUT);
- gpio_free(S5PC100_GPD(0));
-}
-
-static struct platform_pwm_backlight_data smdkc100_backlight_data = {
- .pwm_id = 0,
- .max_brightness = 255,
- .dft_brightness = 255,
- .pwm_period_ns = 78770,
- .init = smdkc100_backlight_init,
- .exit = smdkc100_backlight_exit,
-};
-
-static struct platform_device smdkc100_backlight_device = {
- .name = "pwm-backlight",
- .dev = {
- .parent = &s3c_device_timer[0].dev,
- .platform_data = &smdkc100_backlight_data,
- },
-};
-
static struct platform_device *smdkc100_devices[] __initdata = {
&s3c_device_adc,
&s3c_device_cfcon,
@@ -239,14 +201,16 @@ static struct platform_device *smdkc100_devices[] __initdata = {
&s5p_device_fimc1,
&s5p_device_fimc2,
&s5pc100_device_spdif,
- &s3c_device_timer[0],
- &smdkc100_backlight_device,
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
+/* LCD Backlight data */
+static struct samsung_bl_gpio_info smdkc100_bl_gpio_info = {
+ .no = S5PC100_GPD(0),
+ .func = S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data smdkc100_bl_data = {
+ .pwm_id = 0,
};
static void __init smdkc100_map_io(void)
@@ -258,7 +222,7 @@ static void __init smdkc100_map_io(void)
static void __init smdkc100_machine_init(void)
{
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
/* I2C */
s3c_i2c0_set_platdata(NULL);
@@ -276,12 +240,15 @@ static void __init smdkc100_machine_init(void)
/* LCD init */
gpio_request(S5PC100_GPH0(6), "GPH0");
smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0);
+
+ samsung_bl_set(&smdkc100_bl_gpio_info, &smdkc100_bl_data);
+
platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
}
MACHINE_START(SMDKC100, "SMDKC100")
/* Maintainer: Byungho Min <bhmin@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5pc100_init_irq,
.map_io = smdkc100_map_io,
.init_machine = smdkc100_machine_init,
diff --git a/arch/arm/mach-s5pc100/setup-fb-24bpp.c b/arch/arm/mach-s5pc100/setup-fb-24bpp.c
index d31c0f3fe222..8978e4cf9ed5 100644
--- a/arch/arm/mach-s5pc100/setup-fb-24bpp.c
+++ b/arch/arm/mach-s5pc100/setup-fb-24bpp.c
@@ -15,7 +15,6 @@
#include <linux/fb.h>
#include <linux/gpio.h>
-#include <mach/regs-fb.h>
#include <mach/map.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c
index be25879bb2ee..6418c6e8a7b7 100644
--- a/arch/arm/mach-s5pc100/setup-sdhci.c
+++ b/arch/arm/mach-s5pc100/setup-sdhci.c
@@ -11,17 +11,7 @@
* published by the Free Software Foundation.
*/
-#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
@@ -31,35 +21,3 @@ char *s5pc100_hsmmc_clksrcs[4] = {
[2] = "sclk_mmc", /* mmc_bus */
/* [3] = "48m", - note not successfully used yet */
};
-
-
-void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card)
-{
- u32 ctrl2, ctrl3;
-
- /* don't need to alter anything according to card-type */
-
- writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
- ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
- ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
- ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
- S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
- S3C_SDHCI_CTRL2_ENFBCLKRX |
- S3C_SDHCI_CTRL2_DFCNT_NONE |
- S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
- if (ios->clock < 25 * 1000000)
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
- S3C_SDHCI_CTRL3_FCSEL2 |
- S3C_SDHCI_CTRL3_FCSEL1 |
- S3C_SDHCI_CTRL3_FCSEL0);
- else
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
- writel(ctrl2, r + S3C_SDHCI_CONTROL2);
- writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-27 08:24:48 +0300