summaryrefslogtreecommitdiff
path: root/arch/arm/mach-orion5x/mss2-setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-orion5x/mss2-setup.c')
-rw-r--r--arch/arm/mach-orion5x/mss2-setup.c274
1 files changed, 0 insertions, 274 deletions
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
deleted file mode 100644
index e105130ba51c..000000000000
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- * Maxtor Shared Storage II Board Setup
- *
- * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include <mach/bridge-regs.h>
-#include "common.h"
-#include "mpp.h"
-
-#define MSS2_NOR_BOOT_BASE 0xff800000
-#define MSS2_NOR_BOOT_SIZE SZ_256K
-
-/*****************************************************************************
- * Maxtor Shared Storage II Info
- ****************************************************************************/
-
-/*
- * Maxtor Shared Storage II hardware :
- * - Marvell 88F5182-A2 C500
- * - Marvell 88E1111 Gigabit Ethernet PHY
- * - RTC M41T81 (@0x68) on I2C bus
- * - 256KB NOR flash
- * - 64MB of RAM
- */
-
-/*****************************************************************************
- * 256KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-static struct physmap_flash_data mss2_nor_flash_data = {
- .width = 1,
-};
-
-static struct resource mss2_nor_flash_resource = {
- .flags = IORESOURCE_MEM,
- .start = MSS2_NOR_BOOT_BASE,
- .end = MSS2_NOR_BOOT_BASE + MSS2_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device mss2_nor_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &mss2_nor_flash_data,
- },
- .resource = &mss2_nor_flash_resource,
- .num_resources = 1,
-};
-
-/****************************************************************************
- * PCI setup
- ****************************************************************************/
-static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq;
-
- /*
- * Check for devices with hard-wired IRQs.
- */
- irq = orion5x_pci_map_irq(dev, slot, pin);
- if (irq != -1)
- return irq;
-
- return -1;
-}
-
-static struct hw_pci mss2_pci __initdata = {
- .nr_controllers = 2,
- .setup = orion5x_pci_sys_setup,
- .scan = orion5x_pci_sys_scan_bus,
- .map_irq = mss2_pci_map_irq,
-};
-
-static int __init mss2_pci_init(void)
-{
- if (machine_is_mss2())
- pci_common_init(&mss2_pci);
-
- return 0;
-}
-subsys_initcall(mss2_pci_init);
-
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data mss2_eth_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-
-static struct mv_sata_platform_data mss2_sata_data = {
- .n_ports = 2,
-};
-
-/*****************************************************************************
- * GPIO buttons
- ****************************************************************************/
-
-#define MSS2_GPIO_KEY_RESET 12
-#define MSS2_GPIO_KEY_POWER 11
-
-static struct gpio_keys_button mss2_buttons[] = {
- {
- .code = KEY_POWER,
- .gpio = MSS2_GPIO_KEY_POWER,
- .desc = "Power",
- .active_low = 1,
- }, {
- .code = KEY_RESTART,
- .gpio = MSS2_GPIO_KEY_RESET,
- .desc = "Reset",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data mss2_button_data = {
- .buttons = mss2_buttons,
- .nbuttons = ARRAY_SIZE(mss2_buttons),
-};
-
-static struct platform_device mss2_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &mss2_button_data,
- },
-};
-
-/*****************************************************************************
- * RTC m41t81 on I2C bus
- ****************************************************************************/
-
-#define MSS2_GPIO_RTC_IRQ 3
-
-static struct i2c_board_info __initdata mss2_i2c_rtc = {
- I2C_BOARD_INFO("m41t81", 0x68),
-};
-
-/*****************************************************************************
- * MSS2 power off method
- ****************************************************************************/
-/*
- * On the Maxtor Shared Storage II, the shutdown process is the following :
- * - Userland modifies U-boot env to tell U-boot to go idle at next boot
- * - The board reboots
- * - U-boot starts and go into an idle mode until the user press "power"
- */
-static void mss2_power_off(void)
-{
- u32 reg;
-
- /*
- * Enable and issue soft reset
- */
- reg = readl(RSTOUTn_MASK);
- reg |= 1 << 2;
- writel(reg, RSTOUTn_MASK);
-
- reg = readl(CPU_SOFT_RESET);
- reg |= 1;
- writel(reg, CPU_SOFT_RESET);
-}
-
-/****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int mss2_mpp_modes[] __initdata = {
- MPP0_GPIO, /* Power LED */
- MPP1_GPIO, /* Error LED */
- MPP2_UNUSED,
- MPP3_GPIO, /* RTC interrupt */
- MPP4_GPIO, /* HDD ind. (Single/Dual)*/
- MPP5_GPIO, /* HD0 5V control */
- MPP6_GPIO, /* HD0 12V control */
- MPP7_GPIO, /* HD1 5V control */
- MPP8_GPIO, /* HD1 12V control */
- MPP9_UNUSED,
- MPP10_GPIO, /* Fan control */
- MPP11_GPIO, /* Power button */
- MPP12_GPIO, /* Reset button */
- MPP13_UNUSED,
- MPP14_SATA_LED, /* SATA 0 active */
- MPP15_SATA_LED, /* SATA 1 active */
- MPP16_UNUSED,
- MPP17_UNUSED,
- MPP18_UNUSED,
- MPP19_UNUSED,
- 0,
-};
-
-static void __init mss2_init(void)
-{
- /* Setup basic Orion functions. Need to be called early. */
- orion5x_init();
-
- orion5x_mpp_conf(mss2_mpp_modes);
-
- /*
- * MPP[20] Unused
- * MPP[21] PCI clock
- * MPP[22] USB 0 over current
- * MPP[23] USB 1 over current
- */
-
- /*
- * Configure peripherals.
- */
- orion5x_ehci0_init();
- orion5x_ehci1_init();
- orion5x_eth_init(&mss2_eth_data);
- orion5x_i2c_init();
- orion5x_sata_init(&mss2_sata_data);
- orion5x_uart0_init();
- orion5x_xor_init();
-
- mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
- ORION_MBUS_DEVBUS_BOOT_ATTR,
- MSS2_NOR_BOOT_BASE,
- MSS2_NOR_BOOT_SIZE);
- platform_device_register(&mss2_nor_flash);
-
- platform_device_register(&mss2_button_device);
-
- if (gpio_request(MSS2_GPIO_RTC_IRQ, "rtc") == 0) {
- if (gpio_direction_input(MSS2_GPIO_RTC_IRQ) == 0)
- mss2_i2c_rtc.irq = gpio_to_irq(MSS2_GPIO_RTC_IRQ);
- else
- gpio_free(MSS2_GPIO_RTC_IRQ);
- }
- i2c_register_board_info(0, &mss2_i2c_rtc, 1);
-
- /* register mss2 specific power-off method */
- pm_power_off = mss2_power_off;
-}
-
-MACHINE_START(MSS2, "Maxtor Shared Storage II")
- /* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
- .atag_offset = 0x100,
- .init_machine = mss2_init,
- .map_io = orion5x_map_io,
- .init_early = orion5x_init_early,
- .init_irq = orion5x_init_irq,
- .init_time = orion5x_timer_init,
- .fixup = tag_fixup_mem32,
- .restart = orion5x_restart,
-MACHINE_END