diff options
Diffstat (limited to 'arch/arm/mach-omap2')
28 files changed, 205 insertions, 81 deletions
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index 70a81f900bb5..53c39d239d6e 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -97,11 +97,6 @@ __init board_onenand_init(struct mtd_partition *onenand_parts, gpmc_onenand_init(&board_onenand_data); } -#else -void -__init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs) -{ -} #endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */ #if defined(CONFIG_MTD_NAND_OMAP2) || \ diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 8ca14e88a31a..2c5d0ed75285 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -83,11 +83,9 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data tusb_data = { -#if defined(CONFIG_USB_MUSB_OTG) +#ifdef CONFIG_USB_GADGET_MUSB_HDRC .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_PERIPHERAL) - .mode = MUSB_PERIPHERAL, -#else /* defined(CONFIG_USB_MUSB_HOST) */ +#else .mode = MUSB_HOST, #endif .set_power = tusb_set_power, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 79c6909eeb78..580fd17208da 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -81,13 +81,13 @@ static u8 omap3_beagle_version; static struct { int mmc1_gpio_wp; int usb_pwr_level; - int reset_gpio; + int dvi_pd_gpio; int usr_button_gpio; int mmc_caps; } beagle_config = { .mmc1_gpio_wp = -EINVAL, .usb_pwr_level = GPIOF_OUT_INIT_LOW, - .reset_gpio = 129, + .dvi_pd_gpio = -EINVAL, .usr_button_gpio = 4, .mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, }; @@ -126,21 +126,21 @@ static void __init omap3_beagle_init_rev(void) printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX; beagle_config.mmc1_gpio_wp = 29; - beagle_config.reset_gpio = 170; + beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 6: printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3; beagle_config.mmc1_gpio_wp = 23; - beagle_config.reset_gpio = 170; + beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 5: printk(KERN_INFO "OMAP3 Beagle Rev: C4\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C4; beagle_config.mmc1_gpio_wp = 23; - beagle_config.reset_gpio = 170; + beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 0: @@ -274,11 +274,9 @@ static int beagle_twl_gpio_setup(struct device *dev, if (r) pr_err("%s: unable to configure nDVI_PWR_EN\n", __func__); - r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH, - "DVI_LDO_EN"); - if (r) - pr_err("%s: unable to configure DVI_LDO_EN\n", - __func__); + + beagle_config.dvi_pd_gpio = gpio + 2; + } else { /* * REVISIT: need ehci-omap hooks for external VBUS @@ -287,7 +285,7 @@ static int beagle_twl_gpio_setup(struct device *dev, if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) pr_err("%s: unable to configure EHCI_nOC\n", __func__); } - dvi_panel.power_down_gpio = beagle_config.reset_gpio; + dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio; gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level, "nEN_USB_PWR"); @@ -499,7 +497,7 @@ static void __init omap3_beagle_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_init_rev(); - if (beagle_config.mmc1_gpio_wp != -EINVAL) + if (gpio_is_valid(beagle_config.mmc1_gpio_wp)) omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT); mmc[0].caps = beagle_config.mmc_caps; omap_hsmmc_init(mmc); @@ -510,15 +508,13 @@ static void __init omap3_beagle_init(void) platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices)); + if (gpio_is_valid(beagle_config.dvi_pd_gpio)) + omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT); omap_display_init(&beagle_dss_data); omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); - omap_mux_init_gpio(170, OMAP_PIN_INPUT); - /* REVISIT leave DVI powered down until it's needed ... */ - gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD"); - usb_musb_init(NULL); usbhs_init(&usbhs_bdata); omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 8fa2fc3a4c3c..779734d8ba37 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -494,8 +494,8 @@ static void __init overo_init(void) regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap_hsmmc_init(mmc); overo_i2c_init(); + omap_hsmmc_init(mmc); omap_display_init(&overo_dss_data); omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index ff53deccecab..df2534de3361 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -144,7 +144,6 @@ static struct lis3lv02d_platform_data rx51_lis3lv02d_data = { .release_resources = lis302_release, .st_min_limits = {-32, 3, 3}, .st_max_limits = {-3, 32, 32}, - .irq2 = OMAP_GPIO_IRQ(LIS302_IRQ2_GPIO), }; #endif @@ -1030,7 +1029,6 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = { { I2C_BOARD_INFO("lis3lv02d", 0x1d), .platform_data = &rx51_lis3lv02d_data, - .irq = OMAP_GPIO_IRQ(LIS302_IRQ1_GPIO), }, #endif }; @@ -1056,6 +1054,10 @@ static int __init rx51_i2c_init(void) omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata); omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); +#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) + rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO); + rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO); +#endif omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3, ARRAY_SIZE(rx51_peripherals_i2c_board_info_3)); return 0; diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 4e1a3b0e8cc8..1efdec236ae8 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3514,7 +3514,7 @@ int __init omap3xxx_clk_init(void) struct omap_clk *c; u32 cpu_clkflg = 0; - if (cpu_is_omap3517()) { + if (soc_is_am35xx()) { cpu_mask = RATE_IN_34XX; cpu_clkflg = CK_AM35XX; } else if (cpu_is_omap3630()) { diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 2172f6603848..ba6f9a0a43e9 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -84,6 +84,7 @@ static struct clk slimbus_clk = { static struct clk sys_32k_ck = { .name = "sys_32k_ck", + .clkdm_name = "prm_clkdm", .rate = 32768, .ops = &clkops_null, }; @@ -512,6 +513,7 @@ static struct clk ddrphy_ck = { .name = "ddrphy_ck", .parent = &dpll_core_m2_ck, .ops = &clkops_null, + .clkdm_name = "l3_emif_clkdm", .fixed_div = 2, .recalc = &omap_fixed_divisor_recalc, }; @@ -769,6 +771,7 @@ static const struct clksel dpll_mpu_m2_div[] = { static struct clk dpll_mpu_m2_ck = { .name = "dpll_mpu_m2_ck", .parent = &dpll_mpu_ck, + .clkdm_name = "cm_clkdm", .clksel = dpll_mpu_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_MPU, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, @@ -1149,6 +1152,7 @@ static const struct clksel l3_div_div[] = { static struct clk l3_div_ck = { .name = "l3_div_ck", .parent = &div_core_ck, + .clkdm_name = "cm_clkdm", .clksel = l3_div_div, .clksel_reg = OMAP4430_CM_CLKSEL_CORE, .clksel_mask = OMAP4430_CLKSEL_L3_MASK, @@ -2824,6 +2828,7 @@ static const struct clksel trace_clk_div_div[] = { static struct clk trace_clk_div_ck = { .name = "trace_clk_div_ck", .parent = &pmd_trace_clk_mux_ck, + .clkdm_name = "emu_sys_clkdm", .clksel = trace_clk_div_div, .clksel_reg = OMAP4430_CM_EMU_DEBUGSS_CLKCTRL, .clksel_mask = OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK, @@ -3412,9 +3417,12 @@ int __init omap4xxx_clk_init(void) if (cpu_is_omap443x()) { cpu_mask = RATE_IN_4430; cpu_clkflg = CK_443X; - } else if (cpu_is_omap446x()) { + } else if (cpu_is_omap446x() || cpu_is_omap447x()) { cpu_mask = RATE_IN_4460 | RATE_IN_4430; cpu_clkflg = CK_446X | CK_443X; + + if (cpu_is_omap447x()) + pr_warn("WARNING: OMAP4470 clock data incomplete!\n"); } else { return 0; } diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index f7b58609bad8..6227e9505c2d 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -31,12 +31,16 @@ * * CLKDM_NO_AUTODEPS: Prevent "autodeps" from being added/removed from this * clockdomain. (Currently, this applies to OMAP3 clockdomains only.) + * CLKDM_ACTIVE_WITH_MPU: The PRCM guarantees that this clockdomain is + * active whenever the MPU is active. True for interconnects and + * the WKUP clockdomains. */ #define CLKDM_CAN_FORCE_SLEEP (1 << 0) #define CLKDM_CAN_FORCE_WAKEUP (1 << 1) #define CLKDM_CAN_ENABLE_AUTO (1 << 2) #define CLKDM_CAN_DISABLE_AUTO (1 << 3) #define CLKDM_NO_AUTODEPS (1 << 4) +#define CLKDM_ACTIVE_WITH_MPU (1 << 5) #define CLKDM_CAN_HWSUP (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO) #define CLKDM_CAN_SWSUP (CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP) diff --git a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c index 839145e1cfbe..4972219653ce 100644 --- a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c +++ b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c @@ -88,4 +88,5 @@ struct clockdomain wkup_common_clkdm = { .name = "wkup_clkdm", .pwrdm = { .name = "wkup_pwrdm" }, .dep_bit = OMAP_EN_WKUP_SHIFT, + .flags = CLKDM_ACTIVE_WITH_MPU, }; diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index c53425847493..7f2133abe7d3 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -381,7 +381,7 @@ static struct clockdomain l4_wkup_44xx_clkdm = { .cm_inst = OMAP4430_PRM_WKUP_CM_INST, .clkdm_offs = OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS, .dep_bit = OMAP4430_L4WKUP_STATDEP_SHIFT, - .flags = CLKDM_CAN_HWSUP, + .flags = CLKDM_CAN_HWSUP | CLKDM_ACTIVE_WITH_MPU, }; static struct clockdomain emu_sys_44xx_clkdm = { diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index a7bc096bd407..f24e3f7a2bbc 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -22,4 +22,15 @@ */ #define MAX_MODULE_READY_TIME 2000 +/* + * MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for + * the PRCM to request that a module enter the inactive state in the + * case of OMAP2 & 3. In the case of OMAP4 this is the max duration + * in microseconds for the module to reach the inactive state from + * a functional state. + * XXX FSUSB on OMAP4430 takes ~4ms to idle after reset during + * kernel init. + */ +#define MAX_MODULE_DISABLE_TIME 5000 + #endif diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index 8c86d294b1a3..1a39945d9ff8 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -313,9 +313,9 @@ int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_off omap_test_timeout((_clkctrl_idlest(part, inst, cdoffs, clkctrl_offs) == CLKCTRL_IDLEST_DISABLED), - MAX_MODULE_READY_TIME, i); + MAX_MODULE_DISABLE_TIME, i); - return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; + return (i < MAX_MODULE_DISABLE_TIME) ? 0 : -EBUSY; } /** diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 54d49ddb9b81..5fb47a14f4ba 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -271,9 +271,9 @@ static struct platform_device *create_simple_dss_pdev(const char *pdev_name, goto err; } - r = omap_device_register(pdev); + r = platform_device_add(pdev); if (r) { - pr_err("Could not register omap_device for %s\n", pdev_name); + pr_err("Could not register platform_device for %s\n", pdev_name); goto err; } diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index 845309f146fe..88ffa1e645cd 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -20,6 +20,9 @@ #include <linux/module.h> #include <linux/platform_device.h> + +#include <asm/memblock.h> + #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" #ifdef CONFIG_BRIDGE_DVFS diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 0389b3264abe..00486a8564fd 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -247,6 +247,17 @@ void __init omap3xxx_check_features(void) omap_features |= OMAP3_HAS_SDRC; /* + * am35x fixups: + * - The am35x Chip ID register has bits 12, 7:5, and 3:2 marked as + * reserved and therefore return 0 when read. Unfortunately, + * OMAP3_CHECK_FEATURE() will interpret some of those zeroes to + * mean that a feature is present even though it isn't so clear + * the incorrectly set feature bits. + */ + if (soc_is_am35xx()) + omap_features &= ~(OMAP3_HAS_IVA | OMAP3_HAS_ISP); + + /* * TODO: Get additional info (where applicable) * e.g. Size of L2 cache. */ diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index fdc4303be563..6038a8c84b74 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -149,6 +149,7 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) ct->chip.irq_ack = omap_mask_ack_irq; ct->chip.irq_mask = irq_gc_mask_disable_reg; ct->chip.irq_unmask = irq_gc_unmask_enable_reg; + ct->chip.flags |= IRQCHIP_SKIP_SET_WAKE; ct->regs.enable = INTC_MIR_CLEAR0; ct->regs.disable = INTC_MIR_SET0; diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 80e55c5c9998..9fe6829f4c16 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -41,6 +41,7 @@ #include "control.h" #include "mux.h" #include "prm.h" +#include "common.h" #define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */ #define OMAP_MUX_BASE_SZ 0x5ca @@ -217,8 +218,7 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, return -ENODEV; } -static int __init -omap_mux_get_by_name(const char *muxname, +int __init omap_mux_get_by_name(const char *muxname, struct omap_mux_partition **found_partition, struct omap_mux **found_mux) { diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 69fe060a0b75..471e62a74a16 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -59,6 +59,7 @@ #define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN #define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4) +#define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0) /* Flags for omapX_mux_init */ #define OMAP_PACKAGE_MASK 0xffff @@ -225,8 +226,18 @@ omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads); */ void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state); +int omap_mux_get_by_name(const char *muxname, + struct omap_mux_partition **found_partition, + struct omap_mux **found_mux); #else +static inline int omap_mux_get_by_name(const char *muxname, + struct omap_mux_partition **found_partition, + struct omap_mux **found_mux) +{ + return 0; +} + static inline int omap_mux_init_gpio(int gpio, int val) { return 0; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index bf86f7e8f91f..2d710f50fca2 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -530,7 +530,7 @@ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v) if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) _set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v); if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP) - _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v); + _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART, v); /* XXX test pwrdm_get_wken for this hwmod's subsystem */ @@ -1124,15 +1124,18 @@ static struct omap_hwmod_addr_space * __init _find_mpu_rt_addr_space(struct omap * _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG * @oh: struct omap_hwmod * * - * If module is marked as SWSUP_SIDLE, force the module out of slave - * idle; otherwise, configure it for smart-idle. If module is marked - * as SWSUP_MSUSPEND, force the module out of master standby; - * otherwise, configure it for smart-standby. No return value. + * Ensure that the OCP_SYSCONFIG register for the IP block represented + * by @oh is set to indicate to the PRCM that the IP block is active. + * Usually this means placing the module into smart-idle mode and + * smart-standby, but if there is a bug in the automatic idle handling + * for the IP block, it may need to be placed into the force-idle or + * no-idle variants of these modes. No return value. */ static void _enable_sysc(struct omap_hwmod *oh) { u8 idlemode, sf; u32 v; + bool clkdm_act; if (!oh->class->sysc) return; @@ -1141,8 +1144,16 @@ static void _enable_sysc(struct omap_hwmod *oh) sf = oh->class->sysc->sysc_flags; if (sf & SYSC_HAS_SIDLEMODE) { - idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? - HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART; + clkdm_act = ((oh->clkdm && + oh->clkdm->flags & CLKDM_ACTIVE_WITH_MPU) || + (oh->_clk && oh->_clk->clkdm && + oh->_clk->clkdm->flags & CLKDM_ACTIVE_WITH_MPU)); + if (clkdm_act && !(oh->class->sysc->idlemodes & + (SIDLE_SMART | SIDLE_SMART_WKUP))) + idlemode = HWMOD_IDLEMODE_FORCE; + else + idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? + HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART; _set_slave_idlemode(oh, idlemode, &v); } @@ -1208,8 +1219,13 @@ static void _idle_sysc(struct omap_hwmod *oh) sf = oh->class->sysc->sysc_flags; if (sf & SYSC_HAS_SIDLEMODE) { - idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? - HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART; + /* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */ + if (oh->flags & HWMOD_SWSUP_SIDLE || + !(oh->class->sysc->idlemodes & + (SIDLE_SMART | SIDLE_SMART_WKUP))) + idlemode = HWMOD_IDLEMODE_FORCE; + else + idlemode = HWMOD_IDLEMODE_SMART; _set_slave_idlemode(oh, idlemode, &v); } diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 950454a3fa31..b7bcba5221ba 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -393,8 +393,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_counter_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0004, .sysc_flags = SYSC_HAS_SIDLEMODE, - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), + .idlemodes = (SIDLE_FORCE | SIDLE_NO), .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -854,6 +853,11 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = { .name = "dss_hdmi", .class = &omap44xx_hdmi_hwmod_class, .clkdm_name = "l3_dss_clkdm", + /* + * HDMI audio requires to use no-idle mode. Hence, + * set idle mode by software. + */ + .flags = HWMOD_SWSUP_SIDLE, .mpu_irqs = omap44xx_dss_hdmi_irqs, .sdma_reqs = omap44xx_dss_hdmi_sdma_reqs, .main_clk = "dss_48mhz_clk", @@ -1924,7 +1928,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp1_sdma_reqs[] = { static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = { { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_clk", .clk = "mcbsp1_sync_mux_ck" }, + { .role = "prcm_fck", .clk = "mcbsp1_sync_mux_ck" }, }; static struct omap_hwmod omap44xx_mcbsp1_hwmod = { @@ -1959,7 +1963,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp2_sdma_reqs[] = { static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = { { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_clk", .clk = "mcbsp2_sync_mux_ck" }, + { .role = "prcm_fck", .clk = "mcbsp2_sync_mux_ck" }, }; static struct omap_hwmod omap44xx_mcbsp2_hwmod = { @@ -1994,7 +1998,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp3_sdma_reqs[] = { static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = { { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_clk", .clk = "mcbsp3_sync_mux_ck" }, + { .role = "prcm_fck", .clk = "mcbsp3_sync_mux_ck" }, }; static struct omap_hwmod omap44xx_mcbsp3_hwmod = { @@ -2029,7 +2033,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp4_sdma_reqs[] = { static struct omap_hwmod_opt_clk mcbsp4_opt_clks[] = { { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_clk", .clk = "mcbsp4_sync_mux_ck" }, + { .role = "prcm_fck", .clk = "mcbsp4_sync_mux_ck" }, }; static struct omap_hwmod omap44xx_mcbsp4_hwmod = { @@ -3860,7 +3864,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = { }; /* usb_host_fs -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_usb_host_fs__l3_main_2 = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_usb_host_fs__l3_main_2 = { .master = &omap44xx_usb_host_fs_hwmod, .slave = &omap44xx_l3_main_2_hwmod, .clk = "l3_div_ck", @@ -3918,7 +3922,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = { }; /* aess -> l4_abe */ -static struct omap_hwmod_ocp_if omap44xx_aess__l4_abe = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_aess__l4_abe = { .master = &omap44xx_aess_hwmod, .slave = &omap44xx_l4_abe_hwmod, .clk = "ocp_abe_iclk", @@ -4009,7 +4013,7 @@ static struct omap_hwmod_addr_space omap44xx_aess_addrs[] = { }; /* l4_abe -> aess */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_aess_hwmod, .clk = "ocp_abe_iclk", @@ -4027,7 +4031,7 @@ static struct omap_hwmod_addr_space omap44xx_aess_dma_addrs[] = { }; /* l4_abe -> aess (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess_dma = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess_dma = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_aess_hwmod, .clk = "ocp_abe_iclk", @@ -5853,7 +5857,7 @@ static struct omap_hwmod_addr_space omap44xx_usb_host_fs_addrs[] = { }; /* l4_cfg -> usb_host_fs */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_fs = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_cfg__usb_host_fs = { .master = &omap44xx_l4_cfg_hwmod, .slave = &omap44xx_usb_host_fs_hwmod, .clk = "l4_div_ck", @@ -6010,13 +6014,13 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_iva__l3_main_2, &omap44xx_l3_main_1__l3_main_2, &omap44xx_l4_cfg__l3_main_2, - &omap44xx_usb_host_fs__l3_main_2, + /* &omap44xx_usb_host_fs__l3_main_2, */ &omap44xx_usb_host_hs__l3_main_2, &omap44xx_usb_otg_hs__l3_main_2, &omap44xx_l3_main_1__l3_main_3, &omap44xx_l3_main_2__l3_main_3, &omap44xx_l4_cfg__l3_main_3, - &omap44xx_aess__l4_abe, + /* &omap44xx_aess__l4_abe, */ &omap44xx_dsp__l4_abe, &omap44xx_l3_main_1__l4_abe, &omap44xx_mpu__l4_abe, @@ -6025,8 +6029,8 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_cfg__l4_wkup, &omap44xx_mpu__mpu_private, &omap44xx_l4_cfg__ocp_wp_noc, - &omap44xx_l4_abe__aess, - &omap44xx_l4_abe__aess_dma, + /* &omap44xx_l4_abe__aess, */ + /* &omap44xx_l4_abe__aess_dma, */ &omap44xx_l3_main_2__c2c, &omap44xx_l4_wkup__counter_32k, &omap44xx_l4_cfg__ctrl_module_core, @@ -6132,7 +6136,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_per__uart2, &omap44xx_l4_per__uart3, &omap44xx_l4_per__uart4, - &omap44xx_l4_cfg__usb_host_fs, + /* &omap44xx_l4_cfg__usb_host_fs, */ &omap44xx_l4_cfg__usb_host_hs, &omap44xx_l4_cfg__usb_otg_hs, &omap44xx_l4_cfg__usb_tll_hs, diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c index a05a62f9ee5b..acc216491b8a 100644 --- a/arch/arm/mach-omap2/omap_l3_smx.c +++ b/arch/arm/mach-omap2/omap_l3_smx.c @@ -155,10 +155,11 @@ static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3, u8 multi = error & L3_ERROR_LOG_MULTI; u32 address = omap3_l3_decode_addr(error_addr); - WARN(true, "%s seen by %s %s at address %x\n", + pr_err("%s seen by %s %s at address %x\n", omap3_l3_code_string(code), omap3_l3_initiator_string(initid), multi ? "Multiple Errors" : "", address); + WARN_ON(1); return IRQ_HANDLED; } diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index 4c90477e6f82..d52651a05daa 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -239,21 +239,15 @@ void am35x_set_mode(u8 musb_mode) devconf2 &= ~CONF2_OTGMODE; switch (musb_mode) { -#ifdef CONFIG_USB_MUSB_HDRC_HCD case MUSB_HOST: /* Force VBUS valid, ID = 0 */ devconf2 |= CONF2_FORCE_HOST; break; -#endif -#ifdef CONFIG_USB_GADGET_MUSB_HDRC case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */ devconf2 |= CONF2_FORCE_DEVICE; break; -#endif -#ifdef CONFIG_USB_MUSB_OTG case MUSB_OTG: /* Don't override the VBUS/ID comparators */ devconf2 |= CONF2_NO_OVERRIDE; break; -#endif default: pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode); } diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index a34023d0ca7c..3a595e899724 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -724,6 +724,7 @@ int __init omap3_pm_init(void) ret = request_irq(omap_prcm_event_to_irq("io"), _prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io", omap3_pm_init); + enable_irq(omap_prcm_event_to_irq("io")); if (ret) { pr_err("pm: Failed to request pm_io irq\n"); diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index 9ce765407ad5..21cb74003a56 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -15,6 +15,7 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/irq.h> #include "common.h" #include <plat/cpu.h> @@ -303,8 +304,15 @@ void omap3xxx_prm_restore_irqen(u32 *saved_mask) static int __init omap3xxx_prcm_init(void) { - if (cpu_is_omap34xx()) - return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); - return 0; + int ret = 0; + + if (cpu_is_omap34xx()) { + ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); + if (!ret) + irq_set_status_flags(omap_prcm_event_to_irq("io"), + IRQ_NOAUTOEN); + } + + return ret; } subsys_initcall(omap3xxx_prcm_init); diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 292d4aaca068..c1b93c752d70 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -57,6 +57,7 @@ struct omap_uart_state { struct list_head node; struct omap_hwmod *oh; + struct omap_device_pad default_omap_uart_pads[2]; }; static LIST_HEAD(uart_list); @@ -126,11 +127,70 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX -static void omap_serial_fill_default_pads(struct omap_board_data *bdata) + +#define OMAP_UART_DEFAULT_PAD_NAME_LEN 28 +static char rx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN], + tx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN] __initdata; + +static void __init +omap_serial_fill_uart_tx_rx_pads(struct omap_board_data *bdata, + struct omap_uart_state *uart) +{ + uart->default_omap_uart_pads[0].name = rx_pad_name; + uart->default_omap_uart_pads[0].flags = OMAP_DEVICE_PAD_REMUX | + OMAP_DEVICE_PAD_WAKEUP; + uart->default_omap_uart_pads[0].enable = OMAP_PIN_INPUT | + OMAP_MUX_MODE0; + uart->default_omap_uart_pads[0].idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0; + uart->default_omap_uart_pads[1].name = tx_pad_name; + uart->default_omap_uart_pads[1].enable = OMAP_PIN_OUTPUT | + OMAP_MUX_MODE0; + bdata->pads = uart->default_omap_uart_pads; + bdata->pads_cnt = ARRAY_SIZE(uart->default_omap_uart_pads); +} + +static void __init omap_serial_check_wakeup(struct omap_board_data *bdata, + struct omap_uart_state *uart) { + struct omap_mux_partition *tx_partition = NULL, *rx_partition = NULL; + struct omap_mux *rx_mux = NULL, *tx_mux = NULL; + char *rx_fmt, *tx_fmt; + int uart_nr = bdata->id + 1; + + if (bdata->id != 2) { + rx_fmt = "uart%d_rx.uart%d_rx"; + tx_fmt = "uart%d_tx.uart%d_tx"; + } else { + rx_fmt = "uart%d_rx_irrx.uart%d_rx_irrx"; + tx_fmt = "uart%d_tx_irtx.uart%d_tx_irtx"; + } + + snprintf(rx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, rx_fmt, + uart_nr, uart_nr); + snprintf(tx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, tx_fmt, + uart_nr, uart_nr); + + if (omap_mux_get_by_name(rx_pad_name, &rx_partition, &rx_mux) >= 0 && + omap_mux_get_by_name + (tx_pad_name, &tx_partition, &tx_mux) >= 0) { + u16 tx_mode, rx_mode; + + tx_mode = omap_mux_read(tx_partition, tx_mux->reg_offset); + rx_mode = omap_mux_read(rx_partition, rx_mux->reg_offset); + + /* + * Check if uart is used in default tx/rx mode i.e. in mux mode0 + * if yes then configure rx pin for wake up capability + */ + if (OMAP_MODE_UART(rx_mode) && OMAP_MODE_UART(tx_mode)) + omap_serial_fill_uart_tx_rx_pads(bdata, uart); + } } #else -static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {} +static void __init omap_serial_check_wakeup(struct omap_board_data *bdata, + struct omap_uart_state *uart) +{ +} #endif static char *cmdline_find_option(char *str) @@ -287,8 +347,7 @@ void __init omap_serial_board_init(struct omap_uart_port_info *info) bdata.pads = NULL; bdata.pads_cnt = 0; - if (cpu_is_omap44xx() || cpu_is_omap34xx()) - omap_serial_fill_default_pads(&bdata); + omap_serial_check_wakeup(&bdata, uart); if (!info) omap_serial_init_port(&bdata, NULL); diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 119d5a910f3a..43a979075338 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -32,6 +32,7 @@ #include "twl-common.h" #include "pm.h" #include "voltage.h" +#include "mux.h" static struct i2c_board_info __initdata pmic_i2c_board_info = { .addr = 0x48, @@ -77,6 +78,7 @@ void __init omap4_pmic_init(const char *pmic_type, struct twl6040_platform_data *twl6040_data, int twl6040_irq) { /* PMIC part*/ + omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); strncpy(omap4_i2c1_board_info[0].type, pmic_type, sizeof(omap4_i2c1_board_info[0].type)); omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N; diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index b19d1b43c12e..c4a576856661 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -41,12 +41,10 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data musb_plat = { -#ifdef CONFIG_USB_MUSB_OTG +#ifdef CONFIG_USB_GADGET_MUSB_HDRC .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_HDRC_HCD) +#else .mode = MUSB_HOST, -#elif defined(CONFIG_USB_GADGET_MUSB_HDRC) - .mode = MUSB_PERIPHERAL, #endif /* .clock is set dynamically */ .config = &musb_config, diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index db84a46ce7fd..805bea6edf17 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -300,7 +300,7 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, printk(error, 3, status); return status; } - tusb_resources[2].start = irq + IH_GPIO_BASE; + tusb_resources[2].start = gpio_to_irq(irq); /* set up memory timings ... can speed them up later */ if (!ps_refclk) { |