diff options
Diffstat (limited to 'arch/arm/mach-omap2')
39 files changed, 908 insertions, 609 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 627fa7e41fba..3eed0006d189 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -62,7 +62,7 @@ config SOC_OMAP5 select HAVE_SMP select COMMON_CLK select HAVE_ARM_ARCH_TIMER - select ARM_ERRATA_798181 + select ARM_ERRATA_798181 if SMP config SOC_AM33XX bool "AM33XX support" diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 244d8a5aa54b..c711ad6ac067 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -100,39 +100,52 @@ static struct platform_device sdp2430_flash_device = { .resource = &sdp2430_flash_resource, }; -static struct platform_device *sdp2430_devices[] __initdata = { - &sdp2430_flash_device, -}; - /* LCD */ #define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91 #define SDP2430_LCD_PANEL_ENABLE_GPIO 154 -static struct panel_generic_dpi_data sdp2430_panel_data = { - .name = "nec_nl2432dr22-11b", - .num_gpios = 2, - .gpios = { - SDP2430_LCD_PANEL_ENABLE_GPIO, - SDP2430_LCD_PANEL_BACKLIGHT_GPIO, - }, +static const struct display_timing sdp2430_lcd_videomode = { + .pixelclock = { 0, 5400000, 0 }, + + .hactive = { 0, 240, 0 }, + .hfront_porch = { 0, 3, 0 }, + .hback_porch = { 0, 39, 0 }, + .hsync_len = { 0, 3, 0 }, + + .vactive = { 0, 320, 0 }, + .vfront_porch = { 0, 2, 0 }, + .vback_porch = { 0, 7, 0 }, + .vsync_len = { 0, 1, 0 }, + + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | + DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, }; -static struct omap_dss_device sdp2430_lcd_device = { - .name = "lcd", - .driver_name = "generic_dpi_panel", - .type = OMAP_DISPLAY_TYPE_DPI, - .phy.dpi.data_lines = 16, - .data = &sdp2430_panel_data, +static struct panel_dpi_platform_data sdp2430_lcd_pdata = { + .name = "lcd", + .source = "dpi.0", + + .data_lines = 16, + + .display_timing = &sdp2430_lcd_videomode, + + .enable_gpio = SDP2430_LCD_PANEL_ENABLE_GPIO, + .backlight_gpio = SDP2430_LCD_PANEL_BACKLIGHT_GPIO, }; -static struct omap_dss_device *sdp2430_dss_devices[] = { - &sdp2430_lcd_device, +static struct platform_device sdp2430_lcd_device = { + .name = "panel-dpi", + .id = 0, + .dev.platform_data = &sdp2430_lcd_pdata, }; static struct omap_dss_board_info sdp2430_dss_data = { - .num_devices = ARRAY_SIZE(sdp2430_dss_devices), - .devices = sdp2430_dss_devices, - .default_device = &sdp2430_lcd_device, + .default_display_name = "lcd", +}; + +static struct platform_device *sdp2430_devices[] __initdata = { + &sdp2430_flash_device, + &sdp2430_lcd_device, }; #if IS_ENABLED(CONFIG_SMC91X) diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 23b004afa3f8..d95d0ef1354a 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -126,53 +126,65 @@ static void __init sdp3430_display_init(void) } -static struct panel_sharp_ls037v7dw01_data sdp3430_lcd_data = { - .resb_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO, - .ini_gpio = -1, - .mo_gpio = -1, - .lr_gpio = -1, - .ud_gpio = -1, +static struct panel_sharp_ls037v7dw01_platform_data sdp3430_lcd_pdata = { + .name = "lcd", + .source = "dpi.0", + + .data_lines = 16, + + .resb_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO, + .ini_gpio = -1, + .mo_gpio = -1, + .lr_gpio = -1, + .ud_gpio = -1, +}; + +static struct platform_device sdp3430_lcd_device = { + .name = "panel-sharp-ls037v7dw01", + .id = 0, + .dev.platform_data = &sdp3430_lcd_pdata, }; -static struct omap_dss_device sdp3430_lcd_device = { - .name = "lcd", - .driver_name = "sharp_ls_panel", - .type = OMAP_DISPLAY_TYPE_DPI, - .phy.dpi.data_lines = 16, - .data = &sdp3430_lcd_data, +static struct connector_dvi_platform_data sdp3430_dvi_connector_pdata = { + .name = "dvi", + .source = "tfp410.0", + .i2c_bus_num = -1, }; -static struct tfp410_platform_data dvi_panel = { - .power_down_gpio = -1, - .i2c_bus_num = -1, +static struct platform_device sdp3430_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &sdp3430_dvi_connector_pdata, }; -static struct omap_dss_device sdp3430_dvi_device = { - .name = "dvi", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "tfp410", - .data = &dvi_panel, - .phy.dpi.data_lines = 24, +static struct encoder_tfp410_platform_data sdp3430_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = -1, }; -static struct omap_dss_device sdp3430_tv_device = { - .name = "tv", - .driver_name = "venc", - .type = OMAP_DISPLAY_TYPE_VENC, - .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +static struct platform_device sdp3430_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &sdp3430_tfp410_pdata, }; +static struct connector_atv_platform_data sdp3430_tv_pdata = { + .name = "tv", + .source = "venc.0", + .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, + .invert_polarity = false, +}; -static struct omap_dss_device *sdp3430_dss_devices[] = { - &sdp3430_lcd_device, - &sdp3430_dvi_device, - &sdp3430_tv_device, +static struct platform_device sdp3430_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &sdp3430_tv_pdata, }; static struct omap_dss_board_info sdp3430_dss_data = { - .num_devices = ARRAY_SIZE(sdp3430_dss_devices), - .devices = sdp3430_dss_devices, - .default_device = &sdp3430_lcd_device, + .default_display_name = "lcd", }; static struct omap2_hsmmc_info mmc[] = { @@ -583,6 +595,11 @@ static void __init omap_3430sdp_init(void) omap_hsmmc_init(mmc); omap3430_i2c_init(); omap_display_init(&sdp3430_dss_data); + platform_device_register(&sdp3430_lcd_device); + platform_device_register(&sdp3430_tfp410_device); + platform_device_register(&sdp3430_dvi_connector_device); + platform_device_register(&sdp3430_tv_connector_device); + if (omap_rev() > OMAP3430_REV_ES1_0) gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2; else diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index d63f14b534b5..8cc2c9e9fb03 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -120,56 +120,95 @@ static int __init am3517_evm_i2c_init(void) return 0; } -static struct panel_generic_dpi_data lcd_panel = { - .name = "sharp_lq", - .num_gpios = 3, - .gpios = { - LCD_PANEL_PWR, - LCD_PANEL_BKLIGHT_PWR, - LCD_PANEL_PWM, - }, +static const struct display_timing am3517_evm_lcd_videomode = { + .pixelclock = { 0, 9000000, 0 }, + + .hactive = { 0, 480, 0 }, + .hfront_porch = { 0, 3, 0 }, + .hback_porch = { 0, 2, 0 }, + .hsync_len = { 0, 42, 0 }, + + .vactive = { 0, 272, 0 }, + .vfront_porch = { 0, 3, 0 }, + .vback_porch = { 0, 2, 0 }, + .vsync_len = { 0, 11, 0 }, + + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | + DISPLAY_FLAGS_DE_LOW | DISPLAY_FLAGS_PIXDATA_POSEDGE, +}; + +static struct panel_dpi_platform_data am3517_evm_lcd_pdata = { + .name = "lcd", + .source = "dpi.0", + + .data_lines = 16, + + .display_timing = &am3517_evm_lcd_videomode, + + .enable_gpio = LCD_PANEL_PWR, + .backlight_gpio = LCD_PANEL_BKLIGHT_PWR, +}; + +static struct platform_device am3517_evm_lcd_device = { + .name = "panel-dpi", + .id = 0, + .dev.platform_data = &am3517_evm_lcd_pdata, }; -static struct omap_dss_device am3517_evm_lcd_device = { - .type = OMAP_DISPLAY_TYPE_DPI, - .name = "lcd", - .driver_name = "generic_dpi_panel", - .data = &lcd_panel, - .phy.dpi.data_lines = 16, +static struct connector_dvi_platform_data am3517_evm_dvi_connector_pdata = { + .name = "dvi", + .source = "tfp410.0", + .i2c_bus_num = -1, }; -static struct omap_dss_device am3517_evm_tv_device = { - .type = OMAP_DISPLAY_TYPE_VENC, - .name = "tv", - .driver_name = "venc", - .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +static struct platform_device am3517_evm_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &am3517_evm_dvi_connector_pdata, }; -static struct tfp410_platform_data dvi_panel = { - .power_down_gpio = -1, - .i2c_bus_num = -1, +static struct encoder_tfp410_platform_data am3517_evm_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = -1, }; -static struct omap_dss_device am3517_evm_dvi_device = { - .type = OMAP_DISPLAY_TYPE_DPI, - .name = "dvi", - .driver_name = "tfp410", - .data = &dvi_panel, - .phy.dpi.data_lines = 24, +static struct platform_device am3517_evm_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &am3517_evm_tfp410_pdata, }; -static struct omap_dss_device *am3517_evm_dss_devices[] = { - &am3517_evm_lcd_device, - &am3517_evm_tv_device, - &am3517_evm_dvi_device, +static struct connector_atv_platform_data am3517_evm_tv_pdata = { + .name = "tv", + .source = "venc.0", + .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, + .invert_polarity = false, +}; + +static struct platform_device am3517_evm_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &am3517_evm_tv_pdata, }; static struct omap_dss_board_info am3517_evm_dss_data = { - .num_devices = ARRAY_SIZE(am3517_evm_dss_devices), - .devices = am3517_evm_dss_devices, - .default_device = &am3517_evm_lcd_device, + .default_display_name = "lcd", }; +static void __init am3517_evm_display_init(void) +{ + gpio_request_one(LCD_PANEL_PWM, GPIOF_OUT_INIT_HIGH, "lcd panel pwm"); + + omap_display_init(&am3517_evm_dss_data); + + platform_device_register(&am3517_evm_tfp410_device); + platform_device_register(&am3517_evm_dvi_connector_device); + platform_device_register(&am3517_evm_lcd_device); + platform_device_register(&am3517_evm_tv_connector_device); +} + /* * Board initialization */ @@ -295,7 +334,9 @@ static void __init am3517_evm_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); am3517_evm_i2c_init(); - omap_display_init(&am3517_evm_dss_data); + + am3517_evm_display_init(); + omap_serial_init(); omap_sdrc_init(NULL, NULL); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index d4622ed26252..33d159e2386e 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -190,52 +190,81 @@ static inline void cm_t35_init_nand(void) {} #define CM_T35_LCD_BL_GPIO 58 #define CM_T35_DVI_EN_GPIO 54 -static struct panel_generic_dpi_data lcd_panel = { - .name = "toppoly_tdo35s", - .num_gpios = 1, - .gpios = { - CM_T35_LCD_BL_GPIO, - }, +static const struct display_timing cm_t35_lcd_videomode = { + .pixelclock = { 0, 26000000, 0 }, + + .hactive = { 0, 480, 0 }, + .hfront_porch = { 0, 104, 0 }, + .hback_porch = { 0, 8, 0 }, + .hsync_len = { 0, 8, 0 }, + + .vactive = { 0, 640, 0 }, + .vfront_porch = { 0, 4, 0 }, + .vback_porch = { 0, 2, 0 }, + .vsync_len = { 0, 2, 0 }, + + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | + DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_NEGEDGE, +}; + +static struct panel_dpi_platform_data cm_t35_lcd_pdata = { + .name = "lcd", + .source = "dpi.0", + + .data_lines = 18, + + .display_timing = &cm_t35_lcd_videomode, + + .enable_gpio = -1, + .backlight_gpio = CM_T35_LCD_BL_GPIO, +}; + +static struct platform_device cm_t35_lcd_device = { + .name = "panel-dpi", + .id = 0, + .dev.platform_data = &cm_t35_lcd_pdata, }; -static struct omap_dss_device cm_t35_lcd_device = { - .name = "lcd", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "generic_dpi_panel", - .data = &lcd_panel, - .phy.dpi.data_lines = 18, +static struct connector_dvi_platform_data cm_t35_dvi_connector_pdata = { + .name = "dvi", + .source = "tfp410.0", + .i2c_bus_num = -1, }; -static struct tfp410_platform_data dvi_panel = { - .power_down_gpio = CM_T35_DVI_EN_GPIO, - .i2c_bus_num = -1, +static struct platform_device cm_t35_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &cm_t35_dvi_connector_pdata, }; -static struct omap_dss_device cm_t35_dvi_device = { - .name = "dvi", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "tfp410", - .data = &dvi_panel, - .phy.dpi.data_lines = 24, +static struct encoder_tfp410_platform_data cm_t35_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = CM_T35_DVI_EN_GPIO, }; -static struct omap_dss_device cm_t35_tv_device = { - .name = "tv", - .driver_name = "venc", - .type = OMAP_DISPLAY_TYPE_VENC, - .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +static struct platform_device cm_t35_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &cm_t35_tfp410_pdata, }; -static struct omap_dss_device *cm_t35_dss_devices[] = { - &cm_t35_lcd_device, - &cm_t35_dvi_device, - &cm_t35_tv_device, +static struct connector_atv_platform_data cm_t35_tv_pdata = { + .name = "tv", + .source = "venc.0", + .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, + .invert_polarity = false, +}; + +static struct platform_device cm_t35_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &cm_t35_tv_pdata, }; static struct omap_dss_board_info cm_t35_dss_data = { - .num_devices = ARRAY_SIZE(cm_t35_dss_devices), - .devices = cm_t35_dss_devices, - .default_device = &cm_t35_dvi_device, + .default_display_name = "dvi", }; static struct omap2_mcspi_device_config tdo24m_mcspi_config = { @@ -280,6 +309,11 @@ static void __init cm_t35_init_display(void) pr_err("CM-T35: failed to register DSS device\n"); gpio_free(CM_T35_LCD_EN_GPIO); } + + platform_device_register(&cm_t35_tfp410_device); + platform_device_register(&cm_t35_dvi_connector_device); + platform_device_register(&cm_t35_lcd_device); + platform_device_register(&cm_t35_tv_connector_device); } static struct regulator_consumer_supply cm_t35_vmmc1_supply[] = { diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index f1d91ba5d1ac..cdc4fb9960a9 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -112,50 +112,81 @@ static struct regulator_consumer_supply devkit8000_vio_supply[] = { REGULATOR_SUPPLY("vcc", "spi2.0"), }; -static struct panel_generic_dpi_data lcd_panel = { - .name = "innolux_at070tn83", - /* gpios filled in code */ +static const struct display_timing devkit8000_lcd_videomode = { + .pixelclock = { 0, 40000000, 0 }, + + .hactive = { 0, 800, 0 }, + .hfront_porch = { 0, 1, 0 }, + .hback_porch = { 0, 1, 0 }, + .hsync_len = { 0, 48, 0 }, + + .vactive = { 0, 480, 0 }, + .vfront_porch = { 0, 12, 0 }, + .vback_porch = { 0, 25, 0 }, + .vsync_len = { 0, 3, 0 }, + + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | + DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, }; -static struct omap_dss_device devkit8000_lcd_device = { +static struct panel_dpi_platform_data devkit8000_lcd_pdata = { .name = "lcd", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "generic_dpi_panel", - .data = &lcd_panel, - .phy.dpi.data_lines = 24, + .source = "dpi.0", + + .data_lines = 24, + + .display_timing = &devkit8000_lcd_videomode, + + .enable_gpio = -1, /* filled in code */ + .backlight_gpio = -1, }; -static struct tfp410_platform_data dvi_panel = { - .power_down_gpio = -1, - .i2c_bus_num = 1, +static struct platform_device devkit8000_lcd_device = { + .name = "panel-dpi", + .id = 0, + .dev.platform_data = &devkit8000_lcd_pdata, }; -static struct omap_dss_device devkit8000_dvi_device = { +static struct connector_dvi_platform_data devkit8000_dvi_connector_pdata = { .name = "dvi", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "tfp410", - .data = &dvi_panel, - .phy.dpi.data_lines = 24, + .source = "tfp410.0", + .i2c_bus_num = 1, }; -static struct omap_dss_device devkit8000_tv_device = { - .name = "tv", - .driver_name = "venc", - .type = OMAP_DISPLAY_TYPE_VENC, - .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +static struct platform_device devkit8000_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &devkit8000_dvi_connector_pdata, }; +static struct encoder_tfp410_platform_data devkit8000_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = -1, /* filled in code */ +}; -static struct omap_dss_device *devkit8000_dss_devices[] = { - &devkit8000_lcd_device, - &devkit8000_dvi_device, - &devkit8000_tv_device, +static struct platform_device devkit8000_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &devkit8000_tfp410_pdata, +}; + +static struct connector_atv_platform_data devkit8000_tv_pdata = { + .name = "tv", + .source = "venc.0", + .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, + .invert_polarity = false, +}; + +static struct platform_device devkit8000_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &devkit8000_tv_pdata, }; static struct omap_dss_board_info devkit8000_dss_data = { - .num_devices = ARRAY_SIZE(devkit8000_dss_devices), - .devices = devkit8000_dss_devices, - .default_device = &devkit8000_lcd_device, + .default_display_name = "lcd", }; static uint32_t board_keymap[] = { @@ -204,11 +235,10 @@ static int devkit8000_twl_gpio_setup(struct device *dev, gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */ - lcd_panel.num_gpios = 1; - lcd_panel.gpios[0] = gpio + TWL4030_GPIO_MAX + 0; + devkit8000_lcd_pdata.enable_gpio = gpio + TWL4030_GPIO_MAX + 0; /* gpio + 7 is "DVI_PD" (out, active low) */ - dvi_panel.power_down_gpio = gpio + 7; + devkit8000_tfp410_pdata.power_down_gpio = gpio + 7; return 0; } @@ -413,6 +443,10 @@ static struct platform_device *devkit8000_devices[] __initdata = { &leds_gpio, &keys_gpio, &omap_dm9000_dev, + &devkit8000_lcd_device, + &devkit8000_tfp410_device, + &devkit8000_dvi_connector_device, + &devkit8000_tv_connector_device, }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index e5fbfed69aa2..be5d005ebad2 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -15,6 +15,7 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/irqdomain.h> +#include <linux/clk.h> #include <asm/mach/arch.h> @@ -35,6 +36,21 @@ static struct of_device_id omap_dt_match_table[] __initdata = { { } }; +/* + * Create alias for USB host PHY clock. + * Remove this when clock phandle can be provided via DT + */ +static void __init legacy_init_ehci_clk(char *clkname) +{ + int ret; + + ret = clk_add_alias("main_clk", NULL, clkname, NULL); + if (ret) { + pr_err("%s:Failed to add main_clk alias to %s :%d\n", + __func__, clkname, ret); + } +} + static void __init omap_generic_init(void) { omap_sdrc_init(NULL, NULL); @@ -45,10 +61,15 @@ static void __init omap_generic_init(void) * HACK: call display setup code for selected boards to enable omapdss. * This will be removed when omapdss supports DT. */ - if (of_machine_is_compatible("ti,omap4-panda")) + if (of_machine_is_compatible("ti,omap4-panda")) { omap4_panda_display_init_of(); + legacy_init_ehci_clk("auxclk3_ck"); + + } else if (of_machine_is_compatible("ti,omap4-sdp")) omap_4430sdp_display_init_of(); + else if (of_machine_is_compatible("ti,omap5-uevm")) + legacy_init_ehci_clk("auxclk1_ck"); } #ifdef CONFIG_SOC_OMAP2420 diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 69c0acf5aa63..87e41a8b8d46 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -194,30 +194,48 @@ static struct platform_device h4_flash_device = { .resource = &h4_flash_resource, }; -static struct platform_device *h4_devices[] __initdata = { - &h4_flash_device, +static const struct display_timing cm_t35_lcd_videomode = { + .pixelclock = { 0, 6250000, 0 }, + + .hactive = { 0, 240, 0 }, + .hfront_porch = { 0, 15, 0 }, + .hback_porch = { 0, 60, 0 }, + .hsync_len = { 0, 15, 0 }, + + .vactive = { 0, 320, 0 }, + .vfront_porch = { 0, 1, 0 }, + .vback_porch = { 0, 1, 0 }, + .vsync_len = { 0, 1, 0 }, + + .flags = DISPLAY_FLAGS_HSYNC_HIGH | DISPLAY_FLAGS_VSYNC_HIGH | + DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, }; -static struct panel_generic_dpi_data h4_panel_data = { - .name = "h4", +static struct panel_dpi_platform_data cm_t35_lcd_pdata = { + .name = "lcd", + .source = "dpi.0", + + .data_lines = 16, + + .display_timing = &cm_t35_lcd_videomode, + + .enable_gpio = -1, + .backlight_gpio = -1, }; -static struct omap_dss_device h4_lcd_device = { - .name = "lcd", - .driver_name = "generic_dpi_panel", - .type = OMAP_DISPLAY_TYPE_DPI, - .phy.dpi.data_lines = 16, - .data = &h4_panel_data, +static struct platform_device cm_t35_lcd_device = { + .name = "panel-dpi", + .id = 0, + .dev.platform_data = &cm_t35_lcd_pdata, }; -static struct omap_dss_device *h4_dss_devices[] = { - &h4_lcd_device, +static struct platform_device *h4_devices[] __initdata = { + &h4_flash_device, + &cm_t35_lcd_device, }; static struct omap_dss_board_info h4_dss_data = { - .num_devices = ARRAY_SIZE(h4_dss_devices), - .devices = h4_dss_devices, - .default_device = &h4_lcd_device, + .default_display_name = "lcd", }; /* 2420 Sysboot setup (2430 is different) */ diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 87e65dde8e13..06dbb2d3d38b 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -429,31 +429,39 @@ static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = { .setup = igep_twl_gpio_setup, }; -static struct tfp410_platform_data dvi_panel = { - .i2c_bus_num = 3, - .power_down_gpio = IGEP2_GPIO_DVI_PUP, +static struct connector_dvi_platform_data omap3stalker_dvi_connector_pdata = { + .name = "dvi", + .source = "tfp410.0", + .i2c_bus_num = 3, }; -static struct omap_dss_device igep2_dvi_device = { - .type = OMAP_DISPLAY_TYPE_DPI, - .name = "dvi", - .driver_name = "tfp410", - .data = &dvi_panel, - .phy.dpi.data_lines = 24, +static struct platform_device omap3stalker_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &omap3stalker_dvi_connector_pdata, }; -static struct omap_dss_device *igep2_dss_devices[] = { - &igep2_dvi_device +static struct encoder_tfp410_platform_data omap3stalker_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = IGEP2_GPIO_DVI_PUP, +}; + +static struct platform_device omap3stalker_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &omap3stalker_tfp410_pdata, }; static struct omap_dss_board_info igep2_dss_data = { - .num_devices = ARRAY_SIZE(igep2_dss_devices), - .devices = igep2_dss_devices, - .default_device = &igep2_dvi_device, + .default_display_name = "dvi", }; static struct platform_device *igep_devices[] __initdata = { &igep_vwlan_device, + &omap3stalker_tfp410_device, + &omap3stalker_dvi_connector_device, }; static int igep2_keymap[] = { diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 62e4f701b63b..dd8da2c5399f 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -184,45 +184,70 @@ static inline void __init ldp_init_smsc911x(void) #define LCD_PANEL_RESET_GPIO 55 #define LCD_PANEL_QVGA_GPIO 56 -static struct panel_generic_dpi_data ldp_panel_data = { - .name = "nec_nl2432dr22-11b", - .num_gpios = 4, - /* gpios filled in code */ +static const struct display_timing ldp_lcd_videomode = { + .pixelclock = { 0, 5400000, 0 }, + + .hactive = { 0, 240, 0 }, + .hfront_porch = { 0, 3, 0 }, + .hback_porch = { 0, 39, 0 }, + .hsync_len = { 0, 3, 0 }, + + .vactive = { 0, 320, 0 }, + .vfront_porch = { 0, 2, 0 }, + .vback_porch = { 0, 7, 0 }, + .vsync_len = { 0, 1, 0 }, + + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | + DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, }; -static struct omap_dss_device ldp_lcd_device = { - .name = "lcd", - .driver_name = "generic_dpi_panel", - .type = OMAP_DISPLAY_TYPE_DPI, - .phy.dpi.data_lines = 18, - .data = &ldp_panel_data, +static struct panel_dpi_platform_data ldp_lcd_pdata = { + .name = "lcd", + .source = "dpi.0", + + .data_lines = 18, + + .display_timing = &ldp_lcd_videomode, + + .enable_gpio = -1, /* filled in code */ + .backlight_gpio = -1, /* filled in code */ }; -static struct omap_dss_device *ldp_dss_devices[] = { - &ldp_lcd_device, +static struct platform_device ldp_lcd_device = { + .name = "panel-dpi", + .id = 0, + .dev.platform_data = &ldp_lcd_pdata, }; static struct omap_dss_board_info ldp_dss_data = { - .num_devices = ARRAY_SIZE(ldp_dss_devices), - .devices = ldp_dss_devices, - .default_device = &ldp_lcd_device, + .default_display_name = "lcd", }; static void __init ldp_display_init(void) { - ldp_panel_data.gpios[2] = LCD_PANEL_RESET_GPIO; - ldp_panel_data.gpios[3] = LCD_PANEL_QVGA_GPIO; + int r; + + static struct gpio gpios[] __initdata = { + {LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"}, + {LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"}, + }; + + r = gpio_request_array(gpios, ARRAY_SIZE(gpios)); + if (r) { + pr_err("Cannot request LCD GPIOs, error %d\n", r); + return; + } omap_display_init(&ldp_dss_data); } static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - ldp_panel_data.gpios[0] = gpio + 7; - ldp_panel_data.gpio_invert[0] = true; + /* LCD enable GPIO */ + ldp_lcd_pdata.enable_gpio = gpio + 7; - ldp_panel_data.gpios[1] = gpio + 15; - ldp_panel_data.gpio_invert[1] = true; + /* Backlight enable GPIO */ + ldp_lcd_pdata.backlight_gpio = gpio + 15; return 0; } @@ -322,6 +347,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = { static struct platform_device *ldp_devices[] __initdata = { &ldp_gpio_keys_device, + &ldp_lcd_device, }; #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index f6eeb87e4e95..827d15009a86 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -122,11 +122,7 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data tusb_data = { -#ifdef CONFIG_USB_GADGET_MUSB_HDRC .mode = MUSB_OTG, -#else - .mode = MUSB_HOST, -#endif .set_power = tusb_set_power, .min_power = 25, /* x2 = 50 mA drawn from VBUS as peripheral */ .power = 100, /* Max 100 mA VBUS for host mode */ diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 04c116555412..f26918467efc 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -33,7 +33,7 @@ #include <linux/mtd/nand.h> #include <linux/mmc/host.h> #include <linux/usb/phy.h> -#include <linux/usb/nop-usb-xceiv.h> +#include <linux/usb/usb_phy_gen_xceiv.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> @@ -225,35 +225,46 @@ static struct mtd_partition omap3beagle_nand_partitions[] = { /* DSS */ -static struct tfp410_platform_data dvi_panel = { - .i2c_bus_num = 3, - .power_down_gpio = -1, +static struct connector_dvi_platform_data beagle_dvi_connector_pdata = { + .name = "dvi", + .source = "tfp410.0", + .i2c_bus_num = 3, }; -static struct omap_dss_device beagle_dvi_device = { - .type = OMAP_DISPLAY_TYPE_DPI, - .name = "dvi", - .driver_name = "tfp410", - .data = &dvi_panel, - .phy.dpi.data_lines = 24, +static struct platform_device beagle_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &beagle_dvi_connector_pdata, }; -static struct omap_dss_device beagle_tv_device = { +static struct encoder_tfp410_platform_data beagle_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = -1, +}; + +static struct platform_device beagle_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &beagle_tfp410_pdata, +}; + +static struct connector_atv_platform_data beagle_tv_pdata = { .name = "tv", - .driver_name = "venc", - .type = OMAP_DISPLAY_TYPE_VENC, - .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, + .source = "venc.0", + .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, + .invert_polarity = false, }; -static struct omap_dss_device *beagle_dss_devices[] = { - &beagle_dvi_device, - &beagle_tv_device, +static struct platform_device beagle_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &beagle_tv_pdata, }; static struct omap_dss_board_info beagle_dss_data = { - .num_devices = ARRAY_SIZE(beagle_dss_devices), - .devices = beagle_dss_devices, - .default_device = &beagle_dvi_device, + .default_display_name = "dvi", }; #include "sdram-micron-mt46h32m32lf-6.h" @@ -279,7 +290,7 @@ static struct regulator_consumer_supply beagle_vsim_supply[] = { static struct gpio_led gpio_leds[]; /* PHY's VCC regulator might be added later, so flag that we need it */ -static struct nop_usb_xceiv_platform_data hsusb2_phy_data = { +static struct usb_phy_gen_xceiv_platform_data hsusb2_phy_data = { .needs_vcc = true, }; @@ -332,7 +343,11 @@ static int beagle_twl_gpio_setup(struct device *dev, if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) pr_err("%s: unable to configure EHCI_nOC\n", __func__); } - dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio; + beagle_tfp410_pdata.power_down_gpio = beagle_config.dvi_pd_gpio; + + platform_device_register(&beagle_tfp410_device); + platform_device_register(&beagle_dvi_connector_device); + platform_device_register(&beagle_tv_connector_device); /* TWL4030_GPIO_MAX i.e. LED_GPO controls HS USB Port 2 power */ phy_data[0].vcc_gpio = gpio + TWL4030_GPIO_MAX; @@ -547,6 +562,7 @@ static void __init omap3_beagle_init(void) if (gpio_is_valid(beagle_config.dvi_pd_gpio)) omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT); omap_display_init(&beagle_dss_data); + omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 8c026269baca..18143873346c 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -33,7 +33,7 @@ #include <linux/i2c/twl.h> #include <linux/usb/otg.h> #include <linux/usb/musb.h> -#include <linux/usb/nop-usb-xceiv.h> +#include <linux/usb/usb_phy_gen_xceiv.h> #include <linux/smsc911x.h> #include <linux/wl12xx.h> @@ -166,14 +166,6 @@ static inline void __init omap3evm_init_smsc911x(void) { return; } */ #define OMAP3EVM_DVI_PANEL_EN_GPIO 199 -static struct panel_sharp_ls037v7dw01_data omap3_evm_lcd_data = { - .resb_gpio = OMAP3EVM_LCD_PANEL_RESB, - .ini_gpio = OMAP3EVM_LCD_PANEL_INI, - .mo_gpio = OMAP3EVM_LCD_PANEL_QVGA, - .lr_gpio = OMAP3EVM_LCD_PANEL_LR, - .ud_gpio = OMAP3EVM_LCD_PANEL_UD, -}; - #ifdef CONFIG_BROKEN static void __init omap3_evm_display_init(void) { @@ -196,44 +188,65 @@ static void __init omap3_evm_display_init(void) } #endif -static struct omap_dss_device omap3_evm_lcd_device = { - .name = "lcd", - .driver_name = "sharp_ls_panel", - .type = OMAP_DISPLAY_TYPE_DPI, - .phy.dpi.data_lines = 18, - .data = &omap3_evm_lcd_data, +static struct panel_sharp_ls037v7dw01_platform_data omap3_evm_lcd_pdata = { + .name = "lcd", + .source = "dpi.0", + + .data_lines = 18, + + .resb_gpio = OMAP3EVM_LCD_PANEL_RESB, + .ini_gpio = OMAP3EVM_LCD_PANEL_INI, + .mo_gpio = OMAP3EVM_LCD_PANEL_QVGA, + .lr_gpio = OMAP3EVM_LCD_PANEL_LR, + .ud_gpio = OMAP3EVM_LCD_PANEL_UD, +}; + +static struct platform_device omap3_evm_lcd_device = { + .name = "panel-sharp-ls037v7dw01", + .id = 0, + .dev.platform_data = &omap3_evm_lcd_pdata, +}; + +static struct connector_dvi_platform_data omap3_evm_dvi_connector_pdata = { + .name = "dvi", + .source = "tfp410.0", + .i2c_bus_num = -1, +}; + +static struct platform_device omap3_evm_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &omap3_evm_dvi_connector_pdata, }; -static struct omap_dss_device omap3_evm_tv_device = { - .name = "tv", - .driver_name = "venc", - .type = OMAP_DISPLAY_TYPE_VENC, - .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +static struct encoder_tfp410_platform_data omap3_evm_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = OMAP3EVM_DVI_PANEL_EN_GPIO, }; -static struct tfp410_platform_data dvi_panel = { - .power_down_gpio = OMAP3EVM_DVI_PANEL_EN_GPIO, - .i2c_bus_num = -1, +static struct platform_device omap3_evm_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &omap3_evm_tfp410_pdata, }; -static struct omap_dss_device omap3_evm_dvi_device = { - .name = "dvi", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "tfp410", - .data = &dvi_panel, - .phy.dpi.data_lines = 24, +static struct connector_atv_platform_data omap3_evm_tv_pdata = { + .name = "tv", + .source = "venc.0", + .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, + .invert_polarity = false, }; -static struct omap_dss_device *omap3_evm_dss_devices[] = { - &omap3_evm_lcd_device, - &omap3_evm_tv_device, - &omap3_evm_dvi_device, +static struct platform_device omap3_evm_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &omap3_evm_tv_pdata, }; static struct omap_dss_board_info omap3_evm_dss_data = { - .num_devices = ARRAY_SIZE(omap3_evm_dss_devices), - .devices = omap3_evm_dss_devices, - .default_device = &omap3_evm_lcd_device, + .default_display_name = "lcd", }; static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = { @@ -468,7 +481,7 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = { static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = { REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"), /* OMAP ISP */ REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"), /* OMAP ISP */ - REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */ + REGULATOR_SUPPLY("vcc", "usb_phy_gen_xceiv.2"), /* hsusb port 2 */ REGULATOR_SUPPLY("vaux2", NULL), }; @@ -678,6 +691,10 @@ static void __init omap3_evm_init(void) omap3_evm_i2c_init(); omap_display_init(&omap3_evm_dss_data); + platform_device_register(&omap3_evm_lcd_device); + platform_device_register(&omap3_evm_tfp410_device); + platform_device_register(&omap3_evm_dvi_connector_device); + platform_device_register(&omap3_evm_tv_connector_device); omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index b1547a0edfcd..de1bc6bbe585 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -231,34 +231,21 @@ static struct twl4030_keypad_data pandora_kp_data = { .rep = 1, }; -static struct panel_tpo_td043_data lcd_data = { - .nreset_gpio = 157, -}; - -static struct omap_dss_device pandora_lcd_device = { - .name = "lcd", - .driver_name = "tpo_td043mtea1_panel", - .type = OMAP_DISPLAY_TYPE_DPI, - .phy.dpi.data_lines = 24, - .data = &lcd_data, -}; - -static struct omap_dss_device pandora_tv_device = { - .name = "tv", - .driver_name = "venc", - .type = OMAP_DISPLAY_TYPE_VENC, - .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +static struct connector_atv_platform_data pandora_tv_pdata = { + .name = "tv", + .source = "venc.0", + .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, + .invert_polarity = false, }; -static struct omap_dss_device *pandora_dss_devices[] = { - &pandora_lcd_device, - &pandora_tv_device, +static struct platform_device pandora_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &pandora_tv_pdata, }; static struct omap_dss_board_info pandora_dss_data = { - .num_devices = ARRAY_SIZE(pandora_dss_devices), - .devices = pandora_dss_devices, - .default_device = &pandora_lcd_device, + .default_display_name = "lcd", }; static void pandora_wl1251_init_card(struct mmc_card *card) @@ -348,11 +335,11 @@ static struct regulator_consumer_supply pandora_vdds_supplies[] = { }; static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = { - REGULATOR_SUPPLY("vcc", "display0"), + REGULATOR_SUPPLY("vcc", "spi1.1"), }; static struct regulator_consumer_supply pandora_usb_phy_supply[] = { - REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */ + REGULATOR_SUPPLY("vcc", "usb_phy_gen_xceiv.2"), /* hsusb port 2 */ }; /* ads7846 on SPI and 2 nub controllers on I2C */ @@ -529,13 +516,21 @@ static int __init omap3pandora_i2c_init(void) return 0; } +static struct panel_tpo_td043mtea1_platform_data pandora_lcd_pdata = { + .name = "lcd", + .source = "dpi.0", + + .data_lines = 24, + .nreset_gpio = 157, +}; + static struct spi_board_info omap3pandora_spi_board_info[] __initdata = { { - .modalias = "tpo_td043mtea1_panel_spi", + .modalias = "panel-tpo-td043mtea1", .bus_num = 1, .chip_select = 1, .max_speed_hz = 375000, - .platform_data = &pandora_lcd_device, + .platform_data = &pandora_lcd_pdata, } }; @@ -580,6 +575,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = { &pandora_keys_gpio, &pandora_vwlan_device, &pandora_backlight, + &pandora_tv_connector_device, }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index d37e6b187ae4..ba8342fef799 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -93,40 +93,50 @@ static void __init omap3_stalker_display_init(void) { return; } +static struct connector_dvi_platform_data omap3stalker_dvi_connector_pdata = { + .name = "dvi", + .source = "tfp410.0", + .i2c_bus_num = -1, +}; -static struct omap_dss_device omap3_stalker_tv_device = { - .name = "tv", - .driver_name = "venc", - .type = OMAP_DISPLAY_TYPE_VENC, -#if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO) - .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, -#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE) - .u.venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE, -#endif +static struct platform_device omap3stalker_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &omap3stalker_dvi_connector_pdata, }; -static struct tfp410_platform_data dvi_panel = { - .power_down_gpio = DSS_ENABLE_GPIO, - .i2c_bus_num = -1, +static struct encoder_tfp410_platform_data omap3stalker_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = DSS_ENABLE_GPIO, }; -static struct omap_dss_device omap3_stalker_dvi_device = { - .name = "dvi", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "tfp410", - .data = &dvi_panel, - .phy.dpi.data_lines = 24, +static struct platform_device omap3stalker_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &omap3stalker_tfp410_pdata, +}; + +static struct connector_atv_platform_data omap3stalker_tv_pdata = { + .name = "tv", + .source = "venc.0", +#if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO) + .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, +#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE) + .connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE, +#endif + .invert_polarity = false, }; -static struct omap_dss_device *omap3_stalker_dss_devices[] = { - &omap3_stalker_tv_device, - &omap3_stalker_dvi_device, +static struct platform_device omap3stalker_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &omap3stalker_tv_pdata, }; static struct omap_dss_board_info omap3_stalker_dss_data = { - .num_devices = ARRAY_SIZE(omap3_stalker_dss_devices), - .devices = omap3_stalker_dss_devices, - .default_device = &omap3_stalker_dvi_device, + .default_display_name = "dvi", }; static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = { @@ -356,6 +366,9 @@ static struct usbhs_phy_data phy_data[] __initdata = { static struct platform_device *omap3_stalker_devices[] __initdata = { &keys_gpio, + &omap3stalker_tfp410_device, + &omap3stalker_dvi_connector_device, + &omap3stalker_tv_connector_device, }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 5748b5d06c23..f6d384111911 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -72,6 +72,9 @@ #define OVERO_SMSC911X2_CS 4 #define OVERO_SMSC911X2_GPIO 65 +/* whether to register LCD35 instead of LCD43 */ +static bool overo_use_lcd35; + #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) @@ -149,78 +152,94 @@ static inline void __init overo_init_smsc911x(void) { return; } #define OVERO_GPIO_LCD_EN 144 #define OVERO_GPIO_LCD_BL 145 -static struct tfp410_platform_data dvi_panel = { - .i2c_bus_num = 3, - .power_down_gpio = -1, +static struct connector_atv_platform_data overo_tv_pdata = { + .name = "tv", + .source = "venc.0", + .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, + .invert_polarity = false, }; -static struct omap_dss_device overo_dvi_device = { - .name = "dvi", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "tfp410", - .data = &dvi_panel, - .phy.dpi.data_lines = 24, +static struct platform_device overo_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &overo_tv_pdata, }; -static struct omap_dss_device overo_tv_device = { - .name = "tv", - .driver_name = "venc", - .type = OMAP_DISPLAY_TYPE_VENC, - .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +static const struct display_timing overo_lcd43_videomode = { + .pixelclock = { 0, 9200000, 0 }, + + .hactive = { 0, 480, 0 }, + .hfront_porch = { 0, 8, 0 }, + .hback_porch = { 0, 4, 0 }, + .hsync_len = { 0, 41, 0 }, + + .vactive = { 0, 272, 0 }, + .vfront_porch = { 0, 4, 0 }, + .vback_porch = { 0, 2, 0 }, + .vsync_len = { 0, 10, 0 }, + + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | + DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, }; -static struct panel_generic_dpi_data lcd43_panel = { - .name = "samsung_lte430wq_f0c", - .num_gpios = 2, - .gpios = { - OVERO_GPIO_LCD_EN, - OVERO_GPIO_LCD_BL - }, +static struct panel_dpi_platform_data overo_lcd43_pdata = { + .name = "lcd43", + .source = "dpi.0", + + .data_lines = 24, + + .display_timing = &overo_lcd43_videomode, + + .enable_gpio = OVERO_GPIO_LCD_EN, + .backlight_gpio = OVERO_GPIO_LCD_BL, }; -static struct omap_dss_device overo_lcd43_device = { - .name = "lcd43", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "generic_dpi_panel", - .data = &lcd43_panel, - .phy.dpi.data_lines = 24, +static struct platform_device overo_lcd43_device = { + .name = "panel-dpi", + .id = 0, + .dev.platform_data = &overo_lcd43_pdata, }; -#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ - defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) -static struct panel_generic_dpi_data lcd35_panel = { - .num_gpios = 2, - .gpios = { - OVERO_GPIO_LCD_EN, - OVERO_GPIO_LCD_BL - }, +static struct connector_dvi_platform_data overo_dvi_connector_pdata = { + .name = "dvi", + .source = "tfp410.0", + .i2c_bus_num = 3, }; -static struct omap_dss_device overo_lcd35_device = { - .type = OMAP_DISPLAY_TYPE_DPI, - .name = "lcd35", - .driver_name = "lgphilips_lb035q02_panel", - .phy.dpi.data_lines = 24, - .data = &lcd35_panel, +static struct platform_device overo_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &overo_dvi_connector_pdata, }; -#endif -static struct omap_dss_device *overo_dss_devices[] = { - &overo_dvi_device, - &overo_tv_device, -#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ - defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) - &overo_lcd35_device, -#endif - &overo_lcd43_device, +static struct encoder_tfp410_platform_data overo_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = -1, +}; + +static struct platform_device overo_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &overo_tfp410_pdata, }; static struct omap_dss_board_info overo_dss_data = { - .num_devices = ARRAY_SIZE(overo_dss_devices), - .devices = overo_dss_devices, - .default_device = &overo_dvi_device, + .default_display_name = "lcd43", }; +static void __init overo_display_init(void) +{ + omap_display_init(&overo_dss_data); + + if (!overo_use_lcd35) + platform_device_register(&overo_lcd43_device); + platform_device_register(&overo_tfp410_device); + platform_device_register(&overo_dvi_connector_device); + platform_device_register(&overo_tv_connector_device); +} + static struct mtd_partition overo_nand_partitions[] = { { .name = "xloader", @@ -408,24 +427,41 @@ static int __init overo_i2c_init(void) return 0; } +static struct panel_lb035q02_platform_data overo_lcd35_pdata = { + .name = "lcd35", + .source = "dpi.0", + + .data_lines = 24, + + .enable_gpio = OVERO_GPIO_LCD_EN, + .backlight_gpio = OVERO_GPIO_LCD_BL, +}; + +/* + * NOTE: We need to add either the lgphilips panel, or the lcd43 panel. The + * selection is done based on the overo_use_lcd35 field. If new SPI + * devices are added here, extra work is needed to make only the lgphilips panel + * affected by the overo_use_lcd35 field. + */ static struct spi_board_info overo_spi_board_info[] __initdata = { -#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ - defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) { - .modalias = "lgphilips_lb035q02_panel-spi", + .modalias = "panel_lgphilips_lb035q02", .bus_num = 1, .chip_select = 1, .max_speed_hz = 500000, .mode = SPI_MODE_3, + .platform_data = &overo_lcd35_pdata, }, -#endif }; static int __init overo_spi_init(void) { overo_ads7846_init(); - spi_register_board_info(overo_spi_board_info, - ARRAY_SIZE(overo_spi_board_info)); + + if (overo_use_lcd35) { + spi_register_board_info(overo_spi_board_info, + ARRAY_SIZE(overo_spi_board_info)); + } return 0; } @@ -463,11 +499,13 @@ static void __init overo_init(void) { int ret; + if (strstr(boot_command_line, "omapdss.def_disp=lcd35")) + overo_use_lcd35 = true; + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); overo_i2c_init(); omap_hsmmc_init(mmc); - omap_display_init(&overo_dss_data); omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); @@ -484,6 +522,8 @@ static void __init overo_init(void) overo_init_keys(); omap_twl4030_audio_init("overo", NULL); + overo_display_init(); + /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 9c2dd102fbbb..c3270c0f1fce 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -45,6 +45,8 @@ #include <linux/platform_data/tsl2563.h> #include <linux/lis3lv02d.h> +#include <video/omap-panel-data.h> + #if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE) #include <media/ir-rx51.h> #endif @@ -226,6 +228,15 @@ static struct lp55xx_platform_data rx51_lp5523_platform_data = { }; #endif +#define RX51_LCD_RESET_GPIO 90 + +static struct panel_acx565akm_platform_data acx_pdata = { + .name = "lcd", + .source = "sdi.0", + .reset_gpio = RX51_LCD_RESET_GPIO, + .datapairs = 2, +}; + static struct omap2_mcspi_device_config wl1251_mcspi_config = { .turbo_mode = 0, }; @@ -254,6 +265,7 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { .chip_select = 2, .max_speed_hz = 6000000, .controller_data = &mipid_mcspi_config, + .platform_data = &acx_pdata, }, [RX51_SPI_TSC2005] = { .modalias = "tsc2005", diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c index bdd1e3a179e1..43a90c8d6837 100644 --- a/arch/arm/mach-omap2/board-rx51-video.c +++ b/arch/arm/mach-omap2/board-rx51-video.c @@ -29,34 +29,21 @@ #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) -static struct panel_acx565akm_data lcd_data = { - .reset_gpio = RX51_LCD_RESET_GPIO, +static struct connector_atv_platform_data rx51_tv_pdata = { + .name = "tv", + .source = "venc.0", + .connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE, + .invert_polarity = false, }; -static struct omap_dss_device rx51_lcd_device = { - .name = "lcd", - .driver_name = "panel-acx565akm", - .type = OMAP_DISPLAY_TYPE_SDI, - .phy.sdi.datapairs = 2, - .data = &lcd_data, -}; - -static struct omap_dss_device rx51_tv_device = { - .name = "tv", - .type = OMAP_DISPLAY_TYPE_VENC, - .driver_name = "venc", - .phy.venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE, -}; - -static struct omap_dss_device *rx51_dss_devices[] = { - &rx51_lcd_device, - &rx51_tv_device, +static struct platform_device rx51_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &rx51_tv_pdata, }; static struct omap_dss_board_info rx51_dss_board_info = { - .num_devices = ARRAY_SIZE(rx51_dss_devices), - .devices = rx51_dss_devices, - .default_device = &rx51_lcd_device, + .default_display_name = "lcd", }; static int __init rx51_video_init(void) @@ -71,6 +58,8 @@ static int __init rx51_video_init(void) omap_display_init(&rx51_dss_board_info); + platform_device_register(&rx51_tv_connector_device); + return 0; } diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index d2ea68ea678a..7735105561d8 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -85,7 +85,7 @@ static struct omap_board_mux board_mux[] __initdata = { static struct omap_musb_board_data musb_board_data = { .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_PERIPHERAL, + .mode = MUSB_OTG, .power = 0, }; diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index c2a079cb76fc..3d8ecc1e05bd 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -25,32 +25,23 @@ #define LCD_PANEL_RESET_GPIO_PILOT 55 #define LCD_PANEL_QVGA_GPIO 56 -static struct panel_nec_nl8048_data zoom_lcd_data = { - /* res_gpio filled in code */ - .qvga_gpio = LCD_PANEL_QVGA_GPIO, -}; +static struct panel_nec_nl8048hl11_platform_data zoom_lcd_pdata = { + .name = "lcd", + .source = "dpi.0", -static struct omap_dss_device zoom_lcd_device = { - .name = "lcd", - .driver_name = "NEC_8048_panel", - .type = OMAP_DISPLAY_TYPE_DPI, - .phy.dpi.data_lines = 24, - .data = &zoom_lcd_data, -}; + .data_lines = 24, -static struct omap_dss_device *zoom_dss_devices[] = { - &zoom_lcd_device, + .res_gpio = -1, /* filled in code */ + .qvga_gpio = LCD_PANEL_QVGA_GPIO, }; static struct omap_dss_board_info zoom_dss_data = { - .num_devices = ARRAY_SIZE(zoom_dss_devices), - .devices = zoom_dss_devices, - .default_device = &zoom_lcd_device, + .default_display_name = "lcd", }; static void __init zoom_lcd_panel_init(void) { - zoom_lcd_data.res_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ? + zoom_lcd_pdata.res_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ? LCD_PANEL_RESET_GPIO_PROD : LCD_PANEL_RESET_GPIO_PILOT; } @@ -61,19 +52,20 @@ static struct omap2_mcspi_device_config dss_lcd_mcspi_config = { static struct spi_board_info nec_8048_spi_board_info[] __initdata = { [0] = { - .modalias = "nec_8048_spi", + .modalias = "panel-nec-nl8048hl11", .bus_num = 1, .chip_select = 2, .max_speed_hz = 375000, .controller_data = &dss_lcd_mcspi_config, + .platform_data = &zoom_lcd_pdata, }, }; void __init zoom_display_init(void) { omap_display_init(&zoom_dss_data); + zoom_lcd_panel_init(); spi_register_board_info(nec_8048_spi_board_info, ARRAY_SIZE(nec_8048_spi_board_info)); - zoom_lcd_panel_init(); } diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index ff37be1f6f93..03a0516c7f67 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -400,7 +400,7 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) /* Create devices for DPI and SDI */ - pdev = create_simple_dss_pdev("omapdss_dpi", -1, + pdev = create_simple_dss_pdev("omapdss_dpi", 0, board_data, sizeof(*board_data), dss_pdev); if (IS_ERR(pdev)) { pr_err("Could not build platform_device for omapdss_dpi\n"); @@ -408,7 +408,7 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) } if (cpu_is_omap34xx()) { - pdev = create_simple_dss_pdev("omapdss_sdi", -1, + pdev = create_simple_dss_pdev("omapdss_sdi", 0, board_data, sizeof(*board_data), dss_pdev); if (IS_ERR(pdev)) { pr_err("Could not build platform_device for omapdss_sdi\n"); diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c index 393aeefaebb0..bf89effa4c99 100644 --- a/arch/arm/mach-omap2/dss-common.c +++ b/arch/arm/mach-omap2/dss-common.c @@ -25,6 +25,7 @@ #include <linux/kernel.h> #include <linux/gpio.h> +#include <linux/platform_device.h> #include <video/omapdss.h> #include <video/omap-panel-data.h> @@ -37,70 +38,76 @@ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ #define HDMI_GPIO_HPD 63 /* Hotplug detect */ -/* Display DVI */ #define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0 -/* Using generic display panel */ -static struct tfp410_platform_data omap4_dvi_panel = { - .i2c_bus_num = 3, - .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, +/* DVI Connector */ +static struct connector_dvi_platform_data omap4_panda_dvi_connector_pdata = { + .name = "dvi", + .source = "tfp410.0", + .i2c_bus_num = 2, }; -static struct omap_dss_device omap4_panda_dvi_device = { - .type = OMAP_DISPLAY_TYPE_DPI, - .name = "dvi", - .driver_name = "tfp410", - .data = &omap4_dvi_panel, - .phy.dpi.data_lines = 24, - .channel = OMAP_DSS_CHANNEL_LCD2, +static struct platform_device omap4_panda_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &omap4_panda_dvi_connector_pdata, }; -static struct omap_dss_hdmi_data omap4_panda_hdmi_data = { +/* TFP410 DPI-to-DVI chip */ +static struct encoder_tfp410_platform_data omap4_panda_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, +}; + +static struct platform_device omap4_panda_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &omap4_panda_tfp410_pdata, +}; + +/* HDMI Connector */ +static struct connector_hdmi_platform_data omap4_panda_hdmi_connector_pdata = { + .name = "hdmi", + .source = "tpd12s015.0", +}; + +static struct platform_device omap4_panda_hdmi_connector_device = { + .name = "connector-hdmi", + .id = 0, + .dev.platform_data = &omap4_panda_hdmi_connector_pdata, +}; + +/* TPD12S015 HDMI ESD protection & level shifter chip */ +static struct encoder_tpd12s015_platform_data omap4_panda_tpd_pdata = { + .name = "tpd12s015.0", + .source = "hdmi.0", + .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, .ls_oe_gpio = HDMI_GPIO_LS_OE, .hpd_gpio = HDMI_GPIO_HPD, }; -static struct omap_dss_device omap4_panda_hdmi_device = { - .name = "hdmi", - .driver_name = "hdmi_panel", - .type = OMAP_DISPLAY_TYPE_HDMI, - .channel = OMAP_DSS_CHANNEL_DIGIT, - .data = &omap4_panda_hdmi_data, -}; - -static struct omap_dss_device *omap4_panda_dss_devices[] = { - &omap4_panda_dvi_device, - &omap4_panda_hdmi_device, +static struct platform_device omap4_panda_tpd_device = { + .name = "tpd12s015", + .id = 0, + .dev.platform_data = &omap4_panda_tpd_pdata, }; static struct omap_dss_board_info omap4_panda_dss_data = { - .num_devices = ARRAY_SIZE(omap4_panda_dss_devices), - .devices = omap4_panda_dss_devices, - .default_device = &omap4_panda_dvi_device, + .default_display_name = "dvi", }; -void __init omap4_panda_display_init(void) +void __init omap4_panda_display_init_of(void) { omap_display_init(&omap4_panda_dss_data); - /* - * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and - * later have external pull up on the HDMI I2C lines - */ - if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) - omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); - else - omap_hdmi_init(0); - - omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); -} + platform_device_register(&omap4_panda_tfp410_device); + platform_device_register(&omap4_panda_dvi_connector_device); -void __init omap4_panda_display_init_of(void) -{ - omap_display_init(&omap4_panda_dss_data); + platform_device_register(&omap4_panda_tpd_device); + platform_device_register(&omap4_panda_hdmi_connector_device); } @@ -109,93 +116,73 @@ void __init omap4_panda_display_init_of(void) #define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ #define DLP_POWER_ON_GPIO 40 -static struct nokia_dsi_panel_data dsi1_panel = { - .name = "taal", - .reset_gpio = 102, - .use_ext_te = false, - .ext_te_gpio = 101, - .esd_interval = 0, - .pin_config = { - .num_pins = 6, - .pins = { 0, 1, 2, 3, 4, 5 }, - }, -}; - -static struct omap_dss_device sdp4430_lcd_device = { - .name = "lcd", - .driver_name = "taal", - .type = OMAP_DISPLAY_TYPE_DSI, - .data = &dsi1_panel, - .phy.dsi = { - .module = 0, +static struct panel_dsicm_platform_data dsi1_panel = { + .name = "lcd", + .source = "dsi.0", + .reset_gpio = 102, + .use_ext_te = false, + .ext_te_gpio = 101, + .pin_config = { + .num_pins = 6, + .pins = { 0, 1, 2, 3, 4, 5 }, }, - .channel = OMAP_DSS_CHANNEL_LCD, }; -static struct nokia_dsi_panel_data dsi2_panel = { - .name = "taal", - .reset_gpio = 104, - .use_ext_te = false, - .ext_te_gpio = 103, - .esd_interval = 0, - .pin_config = { - .num_pins = 6, - .pins = { 0, 1, 2, 3, 4, 5 }, - }, +static struct platform_device sdp4430_lcd_device = { + .name = "panel-dsi-cm", + .id = 0, + .dev.platform_data = &dsi1_panel, }; -static struct omap_dss_device sdp4430_lcd2_device = { - .name = "lcd2", - .driver_name = "taal", - .type = OMAP_DISPLAY_TYPE_DSI, - .data = &dsi2_panel, - .phy.dsi = { - - .module = 1, +static struct panel_dsicm_platform_data dsi2_panel = { + .name = "lcd2", + .source = "dsi.1", + .reset_gpio = 104, + .use_ext_te = false, + .ext_te_gpio = 103, + .pin_config = { + .num_pins = 6, + .pins = { 0, 1, 2, 3, 4, 5 }, }, - .channel = OMAP_DSS_CHANNEL_LCD2, }; -static struct omap_dss_hdmi_data sdp4430_hdmi_data = { - .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, - .ls_oe_gpio = HDMI_GPIO_LS_OE, - .hpd_gpio = HDMI_GPIO_HPD, +static struct platform_device sdp4430_lcd2_device = { + .name = "panel-dsi-cm", + .id = 1, + .dev.platform_data = &dsi2_panel, }; -static struct omap_dss_device sdp4430_hdmi_device = { - .name = "hdmi", - .driver_name = "hdmi_panel", - .type = OMAP_DISPLAY_TYPE_HDMI, - .channel = OMAP_DSS_CHANNEL_DIGIT, - .data = &sdp4430_hdmi_data, +/* HDMI Connector */ +static struct connector_hdmi_platform_data sdp4430_hdmi_connector_pdata = { + .name = "hdmi", + .source = "tpd12s015.0", }; -static struct picodlp_panel_data sdp4430_picodlp_pdata = { - .picodlp_adapter_id = 2, - .emu_done_gpio = 44, - .pwrgood_gpio = 45, +static struct platform_device sdp4430_hdmi_connector_device = { + .name = "connector-hdmi", + .id = 0, + .dev.platform_data = &sdp4430_hdmi_connector_pdata, }; -static struct omap_dss_device sdp4430_picodlp_device = { - .name = "picodlp", - .driver_name = "picodlp_panel", - .type = OMAP_DISPLAY_TYPE_DPI, - .phy.dpi.data_lines = 24, - .channel = OMAP_DSS_CHANNEL_LCD2, - .data = &sdp4430_picodlp_pdata, +/* TPD12S015 HDMI ESD protection & level shifter chip */ +static struct encoder_tpd12s015_platform_data sdp4430_tpd_pdata = { + .name = "tpd12s015.0", + .source = "hdmi.0", + + .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, + .ls_oe_gpio = HDMI_GPIO_LS_OE, + .hpd_gpio = HDMI_GPIO_HPD, }; -static struct omap_dss_device *sdp4430_dss_devices[] = { - &sdp4430_lcd_device, - &sdp4430_lcd2_device, - &sdp4430_hdmi_device, - &sdp4430_picodlp_device, +static struct platform_device sdp4430_tpd_device = { + .name = "tpd12s015", + .id = 0, + .dev.platform_data = &sdp4430_tpd_pdata, }; + static struct omap_dss_board_info sdp4430_dss_data = { - .num_devices = ARRAY_SIZE(sdp4430_dss_devices), - .devices = sdp4430_dss_devices, - .default_device = &sdp4430_lcd_device, + .default_display_name = "lcd", }; /* @@ -204,7 +191,7 @@ static struct omap_dss_board_info sdp4430_dss_data = { * used by picodlp on the 4430sdp platform. Keep this gpio disabled as LCD2 is * selected by default */ -void __init omap_4430sdp_display_init(void) +void __init omap_4430sdp_display_init_of(void) { int r; @@ -219,33 +206,10 @@ void __init omap_4430sdp_display_init(void) pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__); omap_display_init(&sdp4430_dss_data); - /* - * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and - * later have external pull up on the HDMI I2C lines - */ - if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) - omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); - else - omap_hdmi_init(0); - - omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); -} - -void __init omap_4430sdp_display_init_of(void) -{ - int r; - r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, - "display_sel"); - if (r) - pr_err("%s: Could not get display_sel GPIO\n", __func__); - - r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, - "DLP POWER ON"); - if (r) - pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__); + platform_device_register(&sdp4430_lcd_device); + platform_device_register(&sdp4430_lcd2_device); - omap_display_init(&sdp4430_dss_data); + platform_device_register(&sdp4430_tpd_device); + platform_device_register(&sdp4430_hdmi_connector_device); } diff --git a/arch/arm/mach-omap2/dss-common.h b/arch/arm/mach-omap2/dss-common.h index 915f6fff5106..c28fe3c03588 100644 --- a/arch/arm/mach-omap2/dss-common.h +++ b/arch/arm/mach-omap2/dss-common.h @@ -6,9 +6,7 @@ * This file will be removed when DSS supports DT. */ -void __init omap4_panda_display_init(void); void __init omap4_panda_display_init_of(void); -void __init omap_4430sdp_display_init(void); void __init omap_4430sdp_display_init_of(void); #endif diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c index d940e53dd9f2..b456b4471f35 100644 --- a/arch/arm/mach-omap2/i2c.c +++ b/arch/arm/mach-omap2/i2c.c @@ -181,7 +181,7 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata, sizeof(struct omap_i2c_bus_platform_data)); WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name); - return PTR_RET(pdev); + return PTR_ERR_OR_ZERO(pdev); } static int __init omap_i2c_cmdline(void) diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 4ea308114165..75e92952c18e 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -20,8 +20,6 @@ #include "omap44xx.h" - __CPUINIT - /* Physical address needed since MMU not enabled yet on secondary core */ #define AUX_CORE_BOOT0_PA 0x48281800 diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index f993a4188701..f991016e2a6a 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -291,7 +291,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) * @cpu : CPU ID * @power_state: CPU low power state. */ -int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) +int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) { struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu); unsigned int cpu_state = 0; diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 98a11463a843..8708b2a9da45 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -51,7 +51,7 @@ void __iomem *omap4_get_scu_base(void) return scu_base; } -static void __cpuinit omap4_secondary_init(unsigned int cpu) +static void omap4_secondary_init(unsigned int cpu) { /* * Configure ACTRL and enable NS SMP bit access on CPU1 on HS device. @@ -72,7 +72,7 @@ static void __cpuinit omap4_secondary_init(unsigned int cpu) spin_unlock(&boot_lock); } -static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle) { static struct clockdomain *cpu1_clkdm; static bool booted; diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index f8bb3b9b6a76..813c61558a5f 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -323,8 +323,8 @@ static void irq_save_secure_context(void) #endif #ifdef CONFIG_HOTPLUG_CPU -static int __cpuinit irq_cpu_hotplug_notify(struct notifier_block *self, - unsigned long action, void *hcpu) +static int irq_cpu_hotplug_notify(struct notifier_block *self, + unsigned long action, void *hcpu) { unsigned int cpu = (unsigned int)hcpu; diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 5cc92874be7e..f99f68e1e85b 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -129,6 +129,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev) struct device_node *node = pdev->dev.of_node; const char *oh_name; int oh_cnt, i, ret = 0; + bool device_active = false; oh_cnt = of_property_count_strings(node, "ti,hwmods"); if (oh_cnt <= 0) { @@ -152,6 +153,8 @@ static int omap_device_build_from_dt(struct platform_device *pdev) goto odbfd_exit1; } hwmods[i] = oh; + if (oh->flags & HWMOD_INIT_NO_IDLE) + device_active = true; } od = omap_device_alloc(pdev, hwmods, oh_cnt); @@ -172,6 +175,11 @@ static int omap_device_build_from_dt(struct platform_device *pdev) pdev->dev.pm_domain = &omap_device_pm_domain; + if (device_active) { + omap_device_enable(pdev); + pm_runtime_set_active(&pdev->dev); + } + odbfd_exit1: kfree(hwmods); odbfd_exit: @@ -842,6 +850,7 @@ static int __init omap_device_late_idle(struct device *dev, void *data) { struct platform_device *pdev = to_platform_device(dev); struct omap_device *od = to_omap_device(pdev); + int i; if (!od) return 0; @@ -850,6 +859,15 @@ static int __init omap_device_late_idle(struct device *dev, void *data) * If omap_device state is enabled, but has no driver bound, * idle it. */ + + /* + * Some devices (like memory controllers) are always kept + * enabled, and should not be idled even with no drivers. + */ + for (i = 0; i < od->hwmods_cnt; i++) + if (od->hwmods[i]->flags & HWMOD_INIT_NO_IDLE) + return 0; + if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) { if (od->_state == OMAP_DEVICE_STATE_ENABLED) { dev_warn(dev, "%s: enabled but no driver. Idling\n", diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 7341eff63f56..7f4db12b1459 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2386,7 +2386,7 @@ static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data) np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh); if (np) - va_start = of_iomap(np, 0); + va_start = of_iomap(np, oh->mpu_rt_idx); } else { va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start); } diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index aab33fd814c0..e1482a9b3bc2 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -95,6 +95,54 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3; #define MODULEMODE_HWCTRL 1 #define MODULEMODE_SWCTRL 2 +#define DEBUG_OMAP2UART1_FLAGS 0 +#define DEBUG_OMAP2UART2_FLAGS 0 +#define DEBUG_OMAP2UART3_FLAGS 0 +#define DEBUG_OMAP3UART3_FLAGS 0 +#define DEBUG_OMAP3UART4_FLAGS 0 +#define DEBUG_OMAP4UART3_FLAGS 0 +#define DEBUG_OMAP4UART4_FLAGS 0 +#define DEBUG_TI81XXUART1_FLAGS 0 +#define DEBUG_TI81XXUART2_FLAGS 0 +#define DEBUG_TI81XXUART3_FLAGS 0 +#define DEBUG_AM33XXUART1_FLAGS 0 + +#define DEBUG_OMAPUART_FLAGS (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET) + +#if defined(CONFIG_DEBUG_OMAP2UART1) +#undef DEBUG_OMAP2UART1_FLAGS +#define DEBUG_OMAP2UART1_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP2UART2) +#undef DEBUG_OMAP2UART2_FLAGS +#define DEBUG_OMAP2UART2_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP2UART3) +#undef DEBUG_OMAP2UART3_FLAGS +#define DEBUG_OMAP2UART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP3UART3) +#undef DEBUG_OMAP3UART3_FLAGS +#define DEBUG_OMAP3UART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP3UART4) +#undef DEBUG_OMAP3UART4_FLAGS +#define DEBUG_OMAP3UART4_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP4UART3) +#undef DEBUG_OMAP4UART3_FLAGS +#define DEBUG_OMAP4UART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP4UART4) +#undef DEBUG_OMAP4UART4_FLAGS +#define DEBUG_OMAP4UART4_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_TI81XXUART1) +#undef DEBUG_TI81XXUART1_FLAGS +#define DEBUG_TI81XXUART1_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_TI81XXUART2) +#undef DEBUG_TI81XXUART2_FLAGS +#define DEBUG_TI81XXUART2_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_TI81XXUART3) +#undef DEBUG_TI81XXUART3_FLAGS +#define DEBUG_TI81XXUART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_AM33XXUART1) +#undef DEBUG_AM33XXUART1_FLAGS +#define DEBUG_AM33XXUART1_FLAGS DEBUG_OMAPUART_FLAGS +#endif /** * struct omap_hwmod_mux_info - hwmod specific mux configuration @@ -568,6 +616,7 @@ struct omap_hwmod_link { * @voltdm: pointer to voltage domain (filled in at runtime) * @dev_attr: arbitrary device attributes that can be passed to the driver * @_sysc_cache: internal-use hwmod flags + * @mpu_rt_idx: index of device address space for register target (for DT boot) * @_mpu_rt_va: cached register target start address (internal use) * @_mpu_port: cached MPU register target slave (internal use) * @opt_clks_cnt: number of @opt_clks @@ -617,6 +666,7 @@ struct omap_hwmod { struct list_head node; struct omap_hwmod_ocp_if *_mpu_port; u16 flags; + u8 mpu_rt_idx; u8 response_lat; u8 rst_lines_cnt; u8 opt_clks_cnt; diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index d05fc7b54567..56cebb05509e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -512,7 +512,7 @@ struct omap_hwmod omap2xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP2UART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -532,7 +532,7 @@ struct omap_hwmod omap2xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP2UART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -552,7 +552,7 @@ struct omap_hwmod omap2xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP2UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 28bbd56346a9..eb2f3b93b51c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -562,6 +562,7 @@ static struct omap_hwmod am33xx_cpgmac0_hwmod = { .clkdm_name = "cpsw_125mhz_clkdm", .flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY), .main_clk = "cpsw_125mhz_gclk", + .mpu_rt_idx = 1, .prcm = { .omap4 = { .clkctrl_offs = AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET, @@ -1512,7 +1513,7 @@ static struct omap_hwmod am33xx_uart1_hwmod = { .name = "uart1", .class = &uart_class, .clkdm_name = "l4_wkup_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_AM33XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .main_clk = "dpll_per_m2_div4_wkupdm_ck", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index f7a3df2fb579..0c3a427da544 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -490,7 +490,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_TI81XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -509,7 +509,7 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_TI81XXUART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -528,7 +528,8 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP3UART3_FLAGS | DEBUG_TI81XXUART3_FLAGS | + HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, @@ -558,7 +559,7 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { .mpu_irqs = uart4_mpu_irqs, .sdma_reqs = uart4_sdma_reqs, .main_clk = "uart4_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP3UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index d04b5e60fdbe..9c3b504477d7 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2858,8 +2858,7 @@ static struct omap_hwmod omap44xx_uart3_hwmod = { .name = "uart3", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET | - HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP4UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { @@ -2875,7 +2874,7 @@ static struct omap_hwmod omap44xx_uart4_hwmod = { .name = "uart4", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP4UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index f37ae96b70a1..3c70f5c1860f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -1375,7 +1375,7 @@ static struct omap_hwmod omap54xx_uart3_hwmod = { .name = "uart3", .class = &omap54xx_uart_hwmod_class, .clkdm_name = "l4per_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .flags = DEBUG_OMAP4UART3_FLAGS, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { @@ -1391,6 +1391,7 @@ static struct omap_hwmod omap54xx_uart4_hwmod = { .name = "uart4", .class = &omap54xx_uart_hwmod_class, .clkdm_name = "l4per_clkdm", + .flags = DEBUG_OMAP4UART4_FLAGS, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 3a674de6cb63..a388f8c1bcb3 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -208,17 +208,6 @@ static int __init omap_serial_early_init(void) pr_info("%s used as console in debug mode: uart%d clocks will not be gated", uart_name, uart->num); } - - /* - * omap-uart can be used for earlyprintk logs - * So if omap-uart is used as console then prevent - * uart reset and idle to get logs from omap-uart - * until uart console driver is available to take - * care for console messages. - * Idling or resetting omap-uart while printing logs - * early boot logs can stall the boot-up. - */ - oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET; } } while (1); diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 2eb19d4d0aa1..e83a6a4b184a 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -28,7 +28,7 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/usb/phy.h> -#include <linux/usb/nop-usb-xceiv.h> +#include <linux/usb/usb_phy_gen_xceiv.h> #include "soc.h" #include "omap_device.h" @@ -349,7 +349,7 @@ static struct fixed_voltage_config hsusb_reg_config = { /* .init_data filled later */ }; -static const char *nop_name = "nop_usb_xceiv"; /* NOP PHY driver */ +static const char *nop_name = "usb_phy_gen_xceiv"; /* NOP PHY driver */ static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */ /** @@ -460,9 +460,9 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys) pdevinfo.name = nop_name; pdevinfo.id = phy->port; pdevinfo.data = phy->platform_data; - pdevinfo.size_data = sizeof(struct nop_usb_xceiv_platform_data); - - scnprintf(phy_id, MAX_STR, "nop_usb_xceiv.%d", + pdevinfo.size_data = + sizeof(struct usb_phy_gen_xceiv_platform_data); + scnprintf(phy_id, MAX_STR, "usb_phy_gen_xceiv.%d", phy->port); pdev = platform_device_register_full(&pdevinfo); if (IS_ERR(pdev)) { diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 8c4de2708cf2..bc897231bd10 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -38,11 +38,8 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data musb_plat = { -#ifdef CONFIG_USB_GADGET_MUSB_HDRC .mode = MUSB_OTG, -#else - .mode = MUSB_HOST, -#endif + /* .clock is set dynamically */ .config = &musb_config, |