1 files changed, 58 insertions, 19 deletions

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index a7421a50410b..3a529c77daa8 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -73,7 +73,7 @@ static LIST_HEAD(uart_list);
 
 static struct plat_serial8250_port serial_platform_data0[] = {
 	{
-		.membase	= IO_ADDRESS(OMAP_UART1_BASE),
+		.membase	= OMAP2_IO_ADDRESS(OMAP_UART1_BASE),
 		.mapbase	= OMAP_UART1_BASE,
 		.irq		= 72,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -87,7 +87,7 @@ static struct plat_serial8250_port serial_platform_data0[] = {
 
 static struct plat_serial8250_port serial_platform_data1[] = {
 	{
-		.membase	= IO_ADDRESS(OMAP_UART2_BASE),
+		.membase	= OMAP2_IO_ADDRESS(OMAP_UART2_BASE),
 		.mapbase	= OMAP_UART2_BASE,
 		.irq		= 73,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -101,7 +101,7 @@ static struct plat_serial8250_port serial_platform_data1[] = {
 
 static struct plat_serial8250_port serial_platform_data2[] = {
 	{
-		.membase	= IO_ADDRESS(OMAP_UART3_BASE),
+		.membase	= OMAP2_IO_ADDRESS(OMAP_UART3_BASE),
 		.mapbase	= OMAP_UART3_BASE,
 		.irq		= 74,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -109,10 +109,35 @@ static struct plat_serial8250_port serial_platform_data2[] = {
 		.regshift	= 2,
 		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
+#ifdef CONFIG_ARCH_OMAP4
+		.membase	= IO_ADDRESS(OMAP_UART4_BASE),
+		.mapbase	= OMAP_UART4_BASE,
+		.irq		= 70,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= OMAP24XX_BASE_BAUD * 16,
+	}, {
+#endif
 		.flags		= 0
 	}
 };
 
+#ifdef CONFIG_ARCH_OMAP4
+static struct plat_serial8250_port serial_platform_data3[] = {
+	{
+		.membase	= IO_ADDRESS(OMAP_UART4_BASE),
+		.mapbase	= OMAP_UART4_BASE,
+		.irq		= 70,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= OMAP24XX_BASE_BAUD * 16,
+	}, {
+		.flags		= 0
+	}
+};
+#endif
 static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
 					   int offset)
 {
@@ -460,7 +485,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 		uart->padconf = 0;
 	}
 
-	p->flags |= UPF_SHARE_IRQ;
+	p->irqflags |= IRQF_SHARED;
 	ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
 			  "serial idle", (void *)uart);
 	WARN_ON(ret);
@@ -550,12 +575,22 @@ static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
 			},
 		},
 	},
+#ifdef CONFIG_ARCH_OMAP4
+	{
+		.pdev = {
+			.name			= "serial8250",
+			.id			= 3
+			.dev			= {
+				.platform_data	= serial_platform_data3,
+			},
+		},
+	},
+#endif
 };
 
-void __init omap_serial_init(void)
+void __init omap_serial_early_init(void)
 {
 	int i;
-	const struct omap_uart_config *info;
 	char name[16];
 
 	/*
@@ -564,23 +599,12 @@ void __init omap_serial_init(void)
 	 * if not needed.
 	 */
 
-	info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
-
-	if (info == NULL)
-		return;
-
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
 		struct omap_uart_state *uart = &omap_uart[i];
 		struct platform_device *pdev = &uart->pdev;
 		struct device *dev = &pdev->dev;
 		struct plat_serial8250_port *p = dev->platform_data;
 
-		if (!(info->enabled_uarts & (1 << i))) {
-			p->membase = NULL;
-			p->mapbase = 0;
-			continue;
-		}
-
 		sprintf(name, "uart%d_ick", i+1);
 		uart->ick = clk_get(NULL, name);
 		if (IS_ERR(uart->ick)) {
@@ -595,8 +619,11 @@ void __init omap_serial_init(void)
 			uart->fck = NULL;
 		}
 
-		if (!uart->ick || !uart->fck)
-			continue;
+		/* FIXME: Remove this once the clkdev is ready */
+		if (!cpu_is_omap44xx()) {
+			if (!uart->ick || !uart->fck)
+				continue;
+		}
 
 		uart->num = i;
 		p->private_data = uart;
@@ -607,6 +634,18 @@ void __init omap_serial_init(void)
 			p->irq += 32;
 
 		omap_uart_enable_clocks(uart);
+	}
+}
+
+void __init omap_serial_init(void)
+{
+	int i;
+
+	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
+		struct omap_uart_state *uart = &omap_uart[i];
+		struct platform_device *pdev = &uart->pdev;
+		struct device *dev = &pdev->dev;
+
 		omap_uart_reset(uart);
 		omap_uart_idle_init(uart);