1 files changed, 12 insertions, 26 deletions

diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c
index 8adf7b1a1dce..d0b15dbafa2e 100644
--- a/arch/arm/mach-omap2/prminst44xx.c
+++ b/arch/arm/mach-omap2/prminst44xx.c
@@ -47,22 +47,14 @@ void omap_prm_base_init(void)
 
 s32 omap4_prmst_get_prm_dev_inst(void)
 {
-	if (prm_dev_inst != PRM_INSTANCE_UNKNOWN)
-		return prm_dev_inst;
-
-	/* This cannot be done way early at boot.. as things are not setup */
-	if (cpu_is_omap44xx())
-		prm_dev_inst = OMAP4430_PRM_DEVICE_INST;
-	else if (soc_is_omap54xx())
-		prm_dev_inst = OMAP54XX_PRM_DEVICE_INST;
-	else if (soc_is_dra7xx())
-		prm_dev_inst = DRA7XX_PRM_DEVICE_INST;
-	else if (soc_is_am43xx())
-		prm_dev_inst = AM43XX_PRM_DEVICE_INST;
-
 	return prm_dev_inst;
 }
 
+void omap4_prminst_set_prm_dev_inst(s32 dev_inst)
+{
+	prm_dev_inst = dev_inst;
+}
+
 /* Read a register in a PRM instance */
 u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx)
 {
@@ -95,12 +87,6 @@ u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst,
 	return v;
 }
 
-/*
- * Address offset (in bytes) between the reset control and the reset
- * status registers: 4 bytes on OMAP4
- */
-#define OMAP4_RST_CTRL_ST_OFFSET		4
-
 /**
  * omap4_prminst_is_hardreset_asserted - read the HW reset line state of
  * submodules contained in the hwmod module
@@ -149,11 +135,11 @@ int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst,
  * omap4_prminst_deassert_hardreset - deassert a submodule hardreset line and
  * wait
  * @shift: register bit shift corresponding to the reset line to deassert
- * @st_shift: status bit offset, not used for OMAP4+
+ * @st_shift: status bit offset corresponding to the reset line
  * @part: PRM partition
  * @inst: PRM instance offset
  * @rstctrl_offs: reset register offset
- * @st_offs: reset status register offset, not used for OMAP4+
+ * @rstst_offs: reset status register offset
  *
  * Some IPs like dsp, ipu or iva contain processors that require an HW
  * reset line to be asserted / deasserted in order to fully enable the
@@ -165,11 +151,11 @@ int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst,
  * of reset, or -EBUSY if the submodule did not exit reset promptly.
  */
 int omap4_prminst_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 inst,
-				     u16 rstctrl_offs, u16 st_offs)
+				     u16 rstctrl_offs, u16 rstst_offs)
 {
 	int c;
 	u32 mask = 1 << shift;
-	u16 rstst_offs = rstctrl_offs + OMAP4_RST_CTRL_ST_OFFSET;
+	u32 st_mask = 1 << st_shift;
 
 	/* Check the current status to avoid de-asserting the line twice */
 	if (omap4_prminst_is_hardreset_asserted(shift, part, inst,
@@ -177,13 +163,13 @@ int omap4_prminst_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 inst,
 		return -EEXIST;
 
 	/* Clear the reset status by writing 1 to the status bit */
-	omap4_prminst_rmw_inst_reg_bits(0xffffffff, mask, part, inst,
+	omap4_prminst_rmw_inst_reg_bits(0xffffffff, st_mask, part, inst,
 					rstst_offs);
 	/* de-assert the reset control line */
 	omap4_prminst_rmw_inst_reg_bits(mask, 0, part, inst, rstctrl_offs);
 	/* wait the status to be set */
-	omap_test_timeout(omap4_prminst_is_hardreset_asserted(shift, part, inst,
-							      rstst_offs),
+	omap_test_timeout(omap4_prminst_is_hardreset_asserted(st_shift, part,
+							      inst, rstst_offs),
 			  MAX_MODULE_HARDRESET_WAIT, c);
 
 	return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;