diff options
Diffstat (limited to 'arch/arm/mach-omap2/clock.c')
| -rw-r--r-- | arch/arm/mach-omap2/clock.c | 1029 |
1 files changed, 217 insertions, 812 deletions
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 759c72a48f7f..a6d0b34b7990 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -2,7 +2,7 @@ * linux/arch/arm/mach-omap2/clock.c * * Copyright (C) 2005-2008 Texas Instruments, Inc. - * Copyright (C) 2004-2008 Nokia Corporation + * Copyright (C) 2004-2010 Nokia Corporation * * Contacts: * Richard Woodruff <r-woodruff2@ti.com> @@ -14,11 +14,10 @@ */ #undef DEBUG -#include <linux/module.h> #include <linux/kernel.h> -#include <linux/device.h> #include <linux/list.h> #include <linux/errno.h> +#include <linux/err.h> #include <linux/delay.h> #include <linux/clk.h> #include <linux/io.h> @@ -28,10 +27,7 @@ #include <plat/clockdomain.h> #include <plat/cpu.h> #include <plat/prcm.h> -#include <asm/div64.h> -#include <plat/sdrc.h> -#include "sdrc.h" #include "clock.h" #include "prm.h" #include "prm-regbits-24xx.h" @@ -39,140 +35,44 @@ #include "cm-regbits-24xx.h" #include "cm-regbits-34xx.h" -/* DPLL rate rounding: minimum DPLL multiplier, divider values */ -#define DPLL_MIN_MULTIPLIER 1 -#define DPLL_MIN_DIVIDER 1 - -/* Possible error results from _dpll_test_mult */ -#define DPLL_MULT_UNDERFLOW -1 +u8 cpu_mask; /* - * Scale factor to mitigate roundoff errors in DPLL rate rounding. - * The higher the scale factor, the greater the risk of arithmetic overflow, - * but the closer the rounded rate to the target rate. DPLL_SCALE_FACTOR - * must be a power of DPLL_SCALE_BASE. + * OMAP2+ specific clock functions */ -#define DPLL_SCALE_FACTOR 64 -#define DPLL_SCALE_BASE 2 -#define DPLL_ROUNDING_VAL ((DPLL_SCALE_BASE / 2) * \ - (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE)) - -/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */ -#define DPLL_FINT_BAND1_MIN 750000 -#define DPLL_FINT_BAND1_MAX 2100000 -#define DPLL_FINT_BAND2_MIN 7500000 -#define DPLL_FINT_BAND2_MAX 21000000 - -/* _dpll_test_fint() return codes */ -#define DPLL_FINT_UNDERFLOW -1 -#define DPLL_FINT_INVALID -2 - -u8 cpu_mask; - -/*------------------------------------------------------------------------- - * OMAP2/3/4 specific clock functions - *-------------------------------------------------------------------------*/ - -void omap2_init_dpll_parent(struct clk *clk) -{ - u32 v; - struct dpll_data *dd; - - dd = clk->dpll_data; - if (!dd) - return; - /* Return bypass rate if DPLL is bypassed */ - v = __raw_readl(dd->control_reg); - v &= dd->enable_mask; - v >>= __ffs(dd->enable_mask); - - /* Reparent in case the dpll is in bypass */ - if (cpu_is_omap24xx()) { - if (v == OMAP2XXX_EN_DPLL_LPBYPASS || - v == OMAP2XXX_EN_DPLL_FRBYPASS) - clk_reparent(clk, dd->clk_bypass); - } else if (cpu_is_omap34xx()) { - if (v == OMAP3XXX_EN_DPLL_LPBYPASS || - v == OMAP3XXX_EN_DPLL_FRBYPASS) - clk_reparent(clk, dd->clk_bypass); - } else if (cpu_is_omap44xx()) { - if (v == OMAP4XXX_EN_DPLL_LPBYPASS || - v == OMAP4XXX_EN_DPLL_FRBYPASS || - v == OMAP4XXX_EN_DPLL_MNBYPASS) - clk_reparent(clk, dd->clk_bypass); - } - return; -} +/* Private functions */ /** - * _omap2xxx_clk_commit - commit clock parent/rate changes in hardware - * @clk: struct clk * - * - * If @clk has the DELAYED_APP flag set, meaning that parent/rate changes - * don't take effect until the VALID_CONFIG bit is written, write the - * VALID_CONFIG bit and wait for the write to complete. No return value. - */ -static void _omap2xxx_clk_commit(struct clk *clk) -{ - if (!cpu_is_omap24xx()) - return; - - if (!(clk->flags & DELAYED_APP)) - return; - - prm_write_mod_reg(OMAP24XX_VALID_CONFIG, OMAP24XX_GR_MOD, - OMAP2_PRCM_CLKCFG_CTRL_OFFSET); - /* OCP barrier */ - prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP2_PRCM_CLKCFG_CTRL_OFFSET); -} - -/* - * _dpll_test_fint - test whether an Fint value is valid for the DPLL - * @clk: DPLL struct clk to test - * @n: divider value (N) to test + * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE + * @clk: struct clk * belonging to the module * - * Tests whether a particular divider @n will result in a valid DPLL - * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter - * Correction". Returns 0 if OK, -1 if the enclosing loop can terminate - * (assuming that it is counting N upwards), or -2 if the enclosing loop - * should skip to the next iteration (again assuming N is increasing). + * If the necessary clocks for the OMAP hardware IP block that + * corresponds to clock @clk are enabled, then wait for the module to + * indicate readiness (i.e., to leave IDLE). This code does not + * belong in the clock code and will be moved in the medium term to + * module-dependent code. No return value. */ -static int _dpll_test_fint(struct clk *clk, u8 n) +static void _omap2_module_wait_ready(struct clk *clk) { - struct dpll_data *dd; - long fint; - int ret = 0; - - dd = clk->dpll_data; - - /* DPLL divider must result in a valid jitter correction val */ - fint = clk->parent->rate / (n + 1); - if (fint < DPLL_FINT_BAND1_MIN) { - - pr_debug("rejecting n=%d due to Fint failure, " - "lowering max_divider\n", n); - dd->max_divider = n; - ret = DPLL_FINT_UNDERFLOW; - - } else if (fint > DPLL_FINT_BAND1_MAX && - fint < DPLL_FINT_BAND2_MIN) { - - pr_debug("rejecting n=%d due to Fint failure\n", n); - ret = DPLL_FINT_INVALID; - - } else if (fint > DPLL_FINT_BAND2_MAX) { - - pr_debug("rejecting n=%d due to Fint failure, " - "boosting min_divider\n", n); - dd->min_divider = n; - ret = DPLL_FINT_INVALID; + void __iomem *companion_reg, *idlest_reg; + u8 other_bit, idlest_bit, idlest_val; + /* Not all modules have multiple clocks that their IDLEST depends on */ + if (clk->ops->find_companion) { + clk->ops->find_companion(clk, &companion_reg, &other_bit); + if (!(__raw_readl(companion_reg) & (1 << other_bit))) + return; } - return ret; + clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val); + + omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), idlest_val, + clk->name); } +/* Public functions */ + /** * omap2_init_clk_clkdm - look up a clockdomain name, store pointer in clk * @clk: OMAP clock struct ptr to use @@ -181,7 +81,6 @@ static int _dpll_test_fint(struct clk *clk, u8 n) * clockdomain pointer, and save it into the struct clk. Intended to be * called during clk_register(). No return value. */ -#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */ void omap2_init_clk_clkdm(struct clk *clk) { struct clockdomain *clkdm; @@ -199,117 +98,6 @@ void omap2_init_clk_clkdm(struct clk *clk) "clkdm %s\n", clk->name, clk->clkdm_name); } } -#endif - -/** - * omap2_init_clksel_parent - set a clksel clk's parent field from the hardware - * @clk: OMAP clock struct ptr to use - * - * Given a pointer to a source-selectable struct clk, read the hardware - * register and determine what its parent is currently set to. Update the - * clk->parent field with the appropriate clk ptr. - */ -void omap2_init_clksel_parent(struct clk *clk) -{ - const struct clksel *clks; - const struct clksel_rate *clkr; - u32 r, found = 0; - - if (!clk->clksel) - return; - - r = __raw_readl(clk->clksel_reg) & clk->clksel_mask; - r >>= __ffs(clk->clksel_mask); - - for (clks = clk->clksel; clks->parent && !found; clks++) { - for (clkr = clks->rates; clkr->div && !found; clkr++) { - if ((clkr->flags & cpu_mask) && (clkr->val == r)) { - if (clk->parent != clks->parent) { - pr_debug("clock: inited %s parent " - "to %s (was %s)\n", - clk->name, clks->parent->name, - ((clk->parent) ? - clk->parent->name : "NULL")); - clk_reparent(clk, clks->parent); - }; - found = 1; - } - } - } - - if (!found) - printk(KERN_ERR "clock: init parent: could not find " - "regval %0x for clock %s\n", r, clk->name); - - return; -} - -/** - * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate - * @clk: struct clk * of a DPLL - * - * DPLLs can be locked or bypassed - basically, enabled or disabled. - * When locked, the DPLL output depends on the M and N values. When - * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock - * or sys_clk. Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and - * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively - * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk. - * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is - * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0 - * if the clock @clk is not a DPLL. - */ -u32 omap2_get_dpll_rate(struct clk *clk) -{ - long long dpll_clk; - u32 dpll_mult, dpll_div, v; - struct dpll_data *dd; - - dd = clk->dpll_data; - if (!dd) - return 0; - - /* Return bypass rate if DPLL is bypassed */ - v = __raw_readl(dd->control_reg); - v &= dd->enable_mask; - v >>= __ffs(dd->enable_mask); - - if (cpu_is_omap24xx()) { - if (v == OMAP2XXX_EN_DPLL_LPBYPASS || - v == OMAP2XXX_EN_DPLL_FRBYPASS) - return dd->clk_bypass->rate; - } else if (cpu_is_omap34xx()) { - if (v == OMAP3XXX_EN_DPLL_LPBYPASS || - v == OMAP3XXX_EN_DPLL_FRBYPASS) - return dd->clk_bypass->rate; - } else if (cpu_is_omap44xx()) { - if (v == OMAP4XXX_EN_DPLL_LPBYPASS || - v == OMAP4XXX_EN_DPLL_FRBYPASS || - v == OMAP4XXX_EN_DPLL_MNBYPASS) - return dd->clk_bypass->rate; - } - - v = __raw_readl(dd->mult_div1_reg); - dpll_mult = v & dd->mult_mask; - dpll_mult >>= __ffs(dd->mult_mask); - dpll_div = v & dd->div1_mask; - dpll_div >>= __ffs(dd->div1_mask); - - dpll_clk = (long long)dd->clk_ref->rate * dpll_mult; - do_div(dpll_clk, dpll_div + 1); - - return dpll_clk; -} - -/* - * Used for clocks that have the same value as the parent clock, - * divided by some factor - */ -unsigned long omap2_fixed_divisor_recalc(struct clk *clk) -{ - WARN_ON(!clk->fixed_div); - - return clk->parent->rate / clk->fixed_div; -} /** * omap2_clk_dflt_find_companion - find companion clock to @clk @@ -351,7 +139,8 @@ void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg, * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk * @clk: struct clk * to find IDLEST info for * @idlest_reg: void __iomem ** to return the CM_IDLEST va in - * @idlest_bit: u8 ** to return the CM_IDLEST bit shift in + * @idlest_bit: u8 * to return the CM_IDLEST bit shift in + * @idlest_val: u8 * to return the idle status indicator * * Return the CM_IDLEST register address and bit shift corresponding * to the module that "owns" this clock. This default code assumes @@ -361,40 +150,26 @@ void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg, * CM_IDLEST2). This is not true for all modules. No return value. */ void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg, - u8 *idlest_bit) + u8 *idlest_bit, u8 *idlest_val) { u32 r; r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); *idlest_reg = (__force void __iomem *)r; *idlest_bit = clk->enable_bit; -} -/** - * omap2_module_wait_ready - wait for an OMAP module to leave IDLE - * @clk: struct clk * belonging to the module - * - * If the necessary clocks for the OMAP hardware IP block that - * corresponds to clock @clk are enabled, then wait for the module to - * indicate readiness (i.e., to leave IDLE). This code does not - * belong in the clock code and will be moved in the medium term to - * module-dependent code. No return value. - */ -static void omap2_module_wait_ready(struct clk *clk) -{ - void __iomem *companion_reg, *idlest_reg; - u8 other_bit, idlest_bit; - - /* Not all modules have multiple clocks that their IDLEST depends on */ - if (clk->ops->find_companion) { - clk->ops->find_companion(clk, &companion_reg, &other_bit); - if (!(__raw_readl(companion_reg) & (1 << other_bit))) - return; - } - - clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit); + /* + * 24xx uses 0 to indicate not ready, and 1 to indicate ready. + * 34xx reverses this, just to keep us on our toes + * AM35xx uses both, depending on the module. + */ + if (cpu_is_omap24xx()) + *idlest_val = OMAP24XX_CM_IDLEST_VAL; + else if (cpu_is_omap34xx()) + *idlest_val = OMAP34XX_CM_IDLEST_VAL; + else + BUG(); - omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), clk->name); } int omap2_dflt_clk_enable(struct clk *clk) @@ -416,7 +191,7 @@ int omap2_dflt_clk_enable(struct clk *clk) v = __raw_readl(clk->enable_reg); /* OCP barrier */ if (clk->ops->find_idlest) - omap2_module_wait_ready(clk); + _omap2_module_wait_ready(clk); return 0; } @@ -456,337 +231,109 @@ const struct clkops clkops_omap2_dflt = { .disable = omap2_dflt_clk_disable, }; -/* Enables clock without considering parent dependencies or use count - * REVISIT: Maybe change this to use clk->enable like on omap1? +/** + * omap2_clk_disable - disable a clock, if the system is not using it + * @clk: struct clk * to disable + * + * Decrements the usecount on struct clk @clk. If there are no users + * left, call the clkops-specific clock disable function to disable it + * in hardware. If the clock is part of a clockdomain (which they all + * should be), request that the clockdomain be disabled. (It too has + * a usecount, and so will not be disabled in the hardware until it no + * longer has any users.) If the clock has a parent clock (most of + * them do), then call ourselves, recursing on the parent clock. This + * can cause an entire branch of the clock tree to be powered off by + * simply disabling one clock. Intended to be called with the clockfw_lock + * spinlock held. No return value. */ -static int _omap2_clk_enable(struct clk *clk) -{ - return clk->ops->enable(clk); -} - -/* Disables clock without considering parent dependencies or use count */ -static void _omap2_clk_disable(struct clk *clk) -{ - clk->ops->disable(clk); -} - void omap2_clk_disable(struct clk *clk) { - if (clk->usecount > 0 && !(--clk->usecount)) { - _omap2_clk_disable(clk); - if (clk->parent) - omap2_clk_disable(clk->parent); -#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */ - if (clk->clkdm) - omap2_clkdm_clk_disable(clk->clkdm, clk); -#endif - + if (clk->usecount == 0) { + WARN(1, "clock: %s: omap2_clk_disable() called, but usecount " + "already 0?", clk->name); + return; } -} -int omap2_clk_enable(struct clk *clk) -{ - int ret = 0; + pr_debug("clock: %s: decrementing usecount\n", clk->name); - if (clk->usecount++ == 0) { -#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */ - if (clk->clkdm) - omap2_clkdm_clk_enable(clk->clkdm, clk); -#endif + clk->usecount--; - if (clk->parent) { - ret = omap2_clk_enable(clk->parent); - if (ret) - goto err; - } + if (clk->usecount > 0) + return; - ret = _omap2_clk_enable(clk); - if (ret) { - if (clk->parent) - omap2_clk_disable(clk->parent); + pr_debug("clock: %s: disabling in hardware\n", clk->name); - goto err; - } - } - return ret; + clk->ops->disable(clk); -err: -#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */ if (clk->clkdm) omap2_clkdm_clk_disable(clk->clkdm, clk); -#endif - clk->usecount--; - return ret; -} - -/* - * Used for clocks that are part of CLKSEL_xyz governed clocks. - * REVISIT: Maybe change to use clk->enable() functions like on omap1? - */ -unsigned long omap2_clksel_recalc(struct clk *clk) -{ - unsigned long rate; - u32 div = 0; - - pr_debug("clock: recalc'ing clksel clk %s\n", clk->name); - - div = omap2_clksel_get_divisor(clk); - if (div == 0) - return clk->rate; - - rate = clk->parent->rate / div; - - pr_debug("clock: new clock rate is %ld (div %d)\n", rate, div); - - return rate; -} - -/** - * omap2_get_clksel_by_parent - return clksel struct for a given clk & parent - * @clk: OMAP struct clk ptr to inspect - * @src_clk: OMAP struct clk ptr of the parent clk to search for - * - * Scan the struct clksel array associated with the clock to find - * the element associated with the supplied parent clock address. - * Returns a pointer to the struct clksel on success or NULL on error. - */ -static const struct clksel *omap2_get_clksel_by_parent(struct clk *clk, - struct clk *src_clk) -{ - const struct clksel *clks; - - if (!clk->clksel) - return NULL; - - for (clks = clk->clksel; clks->parent; clks++) { - if (clks->parent == src_clk) - break; /* Found the requested parent */ - } - - if (!clks->parent) { - printk(KERN_ERR "clock: Could not find parent clock %s in " - "clksel array of clock %s\n", src_clk->name, - clk->name); - return NULL; - } - return clks; + if (clk->parent) + omap2_clk_disable(clk->parent); } /** - * omap2_clksel_round_rate_div - find divisor for the given clock and rate - * @clk: OMAP struct clk to use - * @target_rate: desired clock rate - * @new_div: ptr to where we should store the divisor + * omap2_clk_enable - request that the system enable a clock + * @clk: struct clk * to enable * - * Finds 'best' divider value in an array based on the source and target - * rates. The divider array must be sorted with smallest divider first. - * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT, - * they are only settable as part of virtual_prcm set. - * - * Returns the rounded clock rate or returns 0xffffffff on error. + * Increments the usecount on struct clk @clk. If there were no users + * previously, then recurse up the clock tree, enabling all of the + * clock's parents and all of the parent clockdomains, and finally, + * enabling @clk's clockdomain, and @clk itself. Intended to be + * called with the clockfw_lock spinlock held. Returns 0 upon success + * or a negative error code upon failure. */ -u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, - u32 *new_div) -{ - unsigned long test_rate; - const struct clksel *clks; - const struct clksel_rate *clkr; - u32 last_div = 0; - - pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n", - clk->name, target_rate); - - *new_div = 1; - - clks = omap2_get_clksel_by_parent(clk, clk->parent); - if (!clks) - return ~0; - - for (clkr = clks->rates; clkr->div; clkr++) { - if (!(clkr->flags & cpu_mask)) - continue; - - /* Sanity check */ - if (clkr->div <= last_div) - pr_err("clock: clksel_rate table not sorted " - "for clock %s", clk->name); - - last_div = clkr->div; - - test_rate = clk->parent->rate / clkr->div; - - if (test_rate <= target_rate) - break; /* found it */ - } - - if (!clkr->div) { - pr_err("clock: Could not find divisor for target " - "rate %ld for clock %s parent %s\n", target_rate, - clk->name, clk->parent->name); - return ~0; - } - - *new_div = clkr->div; - - pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div, - (clk->parent->rate / clkr->div)); - - return (clk->parent->rate / clkr->div); -} - -/** - * omap2_clksel_round_rate - find rounded rate for the given clock and rate - * @clk: OMAP struct clk to use - * @target_rate: desired clock rate - * - * Compatibility wrapper for OMAP clock framework - * Finds best target rate based on the source clock and possible dividers. - * rates. The divider array must be sorted with smallest divider first. - * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT, - * they are only settable as part of virtual_prcm set. - * - * Returns the rounded clock rate or returns 0xffffffff on error. - */ -long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate) -{ - u32 new_div; - - return omap2_clksel_round_rate_div(clk, target_rate, &new_div); -} - - -/* Given a clock and a rate apply a clock specific rounding function */ -long omap2_clk_round_rate(struct clk *clk, unsigned long rate) +int omap2_clk_enable(struct clk *clk) { - if (clk->round_rate) - return clk->round_rate(clk, rate); + int ret; - if (clk->flags & RATE_FIXED) - printk(KERN_ERR "clock: generic omap2_clk_round_rate called " - "on fixed-rate clock %s\n", clk->name); + pr_debug("clock: %s: incrementing usecount\n", clk->name); - return clk->rate; -} - -/** - * omap2_clksel_to_divisor() - turn clksel field value into integer divider - * @clk: OMAP struct clk to use - * @field_val: register field value to find - * - * Given a struct clk of a rate-selectable clksel clock, and a register field - * value to search for, find the corresponding clock divisor. The register - * field value should be pre-masked and shifted down so the LSB is at bit 0 - * before calling. Returns 0 on error - */ -u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val) -{ - const struct clksel *clks; - const struct clksel_rate *clkr; + clk->usecount++; - clks = omap2_get_clksel_by_parent(clk, clk->parent); - if (!clks) + if (clk->usecount > 1) return 0; - for (clkr = clks->rates; clkr->div; clkr++) { - if ((clkr->flags & cpu_mask) && (clkr->val == field_val)) - break; - } + pr_debug("clock: %s: enabling in hardware\n", clk->name); - if (!clkr->div) { - printk(KERN_ERR "clock: Could not find fieldval %d for " - "clock %s parent %s\n", field_val, clk->name, - clk->parent->name); - return 0; + if (clk->parent) { + ret = omap2_clk_enable(clk->parent); + if (ret) { + WARN(1, "clock: %s: could not enable parent %s: %d\n", + clk->name, clk->parent->name, ret); + goto oce_err1; + } } - return clkr->div; -} - -/** - * omap2_divisor_to_clksel() - turn clksel integer divisor into a field value - * @clk: OMAP struct clk to use - * @div: integer divisor to search for - * - * Given a struct clk of a rate-selectable clksel clock, and a clock divisor, - * find the corresponding register field value. The return register value is - * the value before left-shifting. Returns ~0 on error - */ -u32 omap2_divisor_to_clksel(struct clk *clk, u32 div) -{ - const struct clksel *clks; - const struct clksel_rate *clkr; - - /* should never happen */ - WARN_ON(div == 0); - - clks = omap2_get_clksel_by_parent(clk, clk->parent); - if (!clks) - return ~0; - - for (clkr = clks->rates; clkr->div; clkr++) { - if ((clkr->flags & cpu_mask) && (clkr->div == div)) - break; + if (clk->clkdm) { + ret = omap2_clkdm_clk_enable(clk->clkdm, clk); + if (ret) { + WARN(1, "clock: %s: could not enable clockdomain %s: " + "%d\n", clk->name, clk->clkdm->name, ret); + goto oce_err2; + } } - if (!clkr->div) { - printk(KERN_ERR "clock: Could not find divisor %d for " - "clock %s parent %s\n", div, clk->name, - clk->parent->name); - return ~0; + ret = clk->ops->enable(clk); + if (ret) { + WARN(1, "clock: %s: could not enable: %d\n", clk->name, ret); + goto oce_err3; } - return clkr->val; -} - -/** - * omap2_clksel_get_divisor - get current divider applied to parent clock. - * @clk: OMAP struct clk to use. - * - * Returns the integer divisor upon success or 0 on error. - */ -u32 omap2_clksel_get_divisor(struct clk *clk) -{ - u32 v; - - if (!clk->clksel_mask) - return 0; - - v = __raw_readl(clk->clksel_reg) & clk->clksel_mask; - v >>= __ffs(clk->clksel_mask); - - return omap2_clksel_to_divisor(clk, v); -} - -int omap2_clksel_set_rate(struct clk *clk, unsigned long rate) -{ - u32 v, field_val, validrate, new_div = 0; - - if (!clk->clksel_mask) - return -EINVAL; - - validrate = omap2_clksel_round_rate_div(clk, rate, &new_div); - if (validrate != rate) - return -EINVAL; - - field_val = omap2_divisor_to_clksel(clk, new_div); - if (field_val == ~0) - return -EINVAL; - - v = __raw_readl(clk->clksel_reg); - v &= ~clk->clksel_mask; - v |= field_val << __ffs(clk->clksel_mask); - __raw_writel(v, clk->clksel_reg); - v = __raw_readl(clk->clksel_reg); /* OCP barrier */ - - clk->rate = clk->parent->rate / new_div; + return 0; - _omap2xxx_clk_commit(clk); +oce_err3: + if (clk->clkdm) + omap2_clkdm_clk_disable(clk->clkdm, clk); +oce_err2: + if (clk->parent) + omap2_clk_disable(clk->parent); +oce_err1: + clk->usecount--; - return 0; + return ret; } - /* Set the clock rate for a clock source */ int omap2_clk_set_rate(struct clk *clk, unsigned long rate) { @@ -794,11 +341,6 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate) pr_debug("clock: set_rate for clock %s to rate %ld\n", clk->name, rate); - /* CONFIG_PARTICIPANT clocks are changed only in sets via the - rate table mechanism, driven by mpu_speed */ - if (clk->flags & CONFIG_PARTICIPANT) - return -EINVAL; - /* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */ if (clk->set_rate) ret = clk->set_rate(clk, rate); @@ -806,289 +348,152 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate) return ret; } -/* - * Converts encoded control register address into a full address - * On error, the return value (parent_div) will be 0. - */ -static u32 _omap2_clksel_get_src_field(struct clk *src_clk, struct clk *clk, - u32 *field_val) -{ - const struct clksel *clks; - const struct clksel_rate *clkr; - - clks = omap2_get_clksel_by_parent(clk, src_clk); - if (!clks) - return 0; - - for (clkr = clks->rates; clkr->div; clkr++) { - if (clkr->flags & cpu_mask && clkr->flags & DEFAULT_RATE) - break; /* Found the default rate for this platform */ - } - - if (!clkr->div) { - printk(KERN_ERR "clock: Could not find default rate for " - "clock %s parent %s\n", clk->name, - src_clk->parent->name); - return 0; - } - - /* Should never happen. Add a clksel mask to the struct clk. */ - WARN_ON(clk->clksel_mask == 0); - - *field_val = clkr->val; - - return clkr->div; -} - int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) { - u32 field_val, v, parent_div; - - if (clk->flags & CONFIG_PARTICIPANT) - return -EINVAL; - if (!clk->clksel) return -EINVAL; - parent_div = _omap2_clksel_get_src_field(new_parent, clk, &field_val); - if (!parent_div) - return -EINVAL; - - /* Set new source value (previous dividers if any in effect) */ - v = __raw_readl(clk->clksel_reg); - v &= ~clk->clksel_mask; - v |= field_val << __ffs(clk->clksel_mask); - __raw_writel(v, clk->clksel_reg); - v = __raw_readl(clk->clksel_reg); /* OCP barrier */ - - _omap2xxx_clk_commit(clk); - - clk_reparent(clk, new_parent); - - /* CLKSEL clocks follow their parents' rates, divided by a divisor */ - clk->rate = new_parent->rate; - - if (parent_div > 0) - clk->rate /= parent_div; - - pr_debug("clock: set parent of %s to %s (new rate %ld)\n", - clk->name, clk->parent->name, clk->rate); + if (clk->parent == new_parent) + return 0; - return 0; + return omap2_clksel_set_parent(clk, new_parent); } -/* DPLL rate rounding code */ +/* OMAP3/4 non-CORE DPLL clkops */ -/** - * omap2_dpll_set_rate_tolerance: set the error tolerance during rate rounding - * @clk: struct clk * of the DPLL - * @tolerance: maximum rate error tolerance - * - * Set the maximum DPLL rate error tolerance for the rate rounding - * algorithm. The rate tolerance is an attempt to balance DPLL power - * saving (the least divider value "n") vs. rate fidelity (the least - * difference between the desired DPLL target rate and the rounded - * rate out of the algorithm). So, increasing the tolerance is likely - * to decrease DPLL power consumption and increase DPLL rate error. - * Returns -EINVAL if provided a null clock ptr or a clk that is not a - * DPLL; or 0 upon success. - */ -int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance) -{ - if (!clk || !clk->dpll_data) - return -EINVAL; - - clk->dpll_data->rate_tolerance = tolerance; +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) - return 0; -} +const struct clkops clkops_omap3_noncore_dpll_ops = { + .enable = omap3_noncore_dpll_enable, + .disable = omap3_noncore_dpll_disable, +}; -static unsigned long _dpll_compute_new_rate(unsigned long parent_rate, - unsigned int m, unsigned int n) -{ - unsigned long long num; +#endif - num = (unsigned long long)parent_rate * m; - do_div(num, n); - return num; -} /* - * _dpll_test_mult - test a DPLL multiplier value - * @m: pointer to the DPLL m (multiplier) value under test - * @n: current DPLL n (divider) value under test - * @new_rate: pointer to storage for the resulting rounded rate - * @target_rate: the desired DPLL rate - * @parent_rate: the DPLL's parent clock rate - * - * This code tests a DPLL multiplier value, ensuring that the - * resulting rate will not be higher than the target_rate, and that - * the multiplier value itself is valid for the DPLL. Initially, the - * integer pointed to by the m argument should be prescaled by - * multiplying by DPLL_SCALE_FACTOR. The code will replace this with - * a non-scaled m upon return. This non-scaled m will result in a - * new_rate as close as possible to target_rate (but not greater than - * target_rate) given the current (parent_rate, n, prescaled m) - * triple. Returns DPLL_MULT_UNDERFLOW in the event that the - * non-scaled m attempted to underflow, which can allow the calling - * function to bail out early; or 0 upon success. + * OMAP2+ clock reset and init functions */ -static int _dpll_test_mult(int *m, int n, unsigned long *new_rate, - unsigned long target_rate, - unsigned long parent_rate) + +#ifdef CONFIG_OMAP_RESET_CLOCKS +void omap2_clk_disable_unused(struct clk *clk) { - int r = 0, carry = 0; + u32 regval32, v; - /* Unscale m and round if necessary */ - if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL) - carry = 1; - *m = (*m / DPLL_SCALE_FACTOR) + carry; + v = (clk->flags & INVERT_ENABLE) ? (1 << clk->enable_bit) : 0; - /* - * The new rate must be <= the target rate to avoid programming - * a rate that is impossible for the hardware to handle - */ - *new_rate = _dpll_compute_new_rate(parent_rate, *m, n); - if (*new_rate > target_rate) { - (*m)--; - *new_rate = 0; - } + regval32 = __raw_readl(clk->enable_reg); + if ((regval32 & (1 << clk->enable_bit)) == v) + return; - /* Guard against m underflow */ - if (*m < DPLL_MIN_MULTIPLIER) { - *m = DPLL_MIN_MULTIPLIER; - *new_rate = 0; - r = DPLL_MULT_UNDERFLOW; + printk(KERN_DEBUG "Disabling unused clock \"%s\"\n", clk->name); + if (cpu_is_omap34xx()) { + omap2_clk_enable(clk); + omap2_clk_disable(clk); + } else { + clk->ops->disable(clk); } - - if (*new_rate == 0) - *new_rate = _dpll_compute_new_rate(parent_rate, *m, n); - - return r; + if (clk->clkdm != NULL) + pwrdm_clkdm_state_switch(clk->clkdm); } +#endif /** - * omap2_dpll_round_rate - round a target rate for an OMAP DPLL - * @clk: struct clk * for a DPLL - * @target_rate: desired DPLL clock rate + * omap2_clk_switch_mpurate_at_boot - switch ARM MPU rate by boot-time argument + * @mpurate_ck_name: clk name of the clock to change rate * - * Given a DPLL, a desired target rate, and a rate tolerance, round - * the target rate to a possible, programmable rate for this DPLL. - * Rate tolerance is assumed to be set by the caller before this - * function is called. Attempts to select the minimum possible n - * within the tolerance to reduce power consumption. Stores the - * computed (m, n) in the DPLL's dpll_data structure so set_rate() - * will not need to call this (expensive) function again. Returns ~0 - * if the target rate cannot be rounded, either because the rate is - * too low or because the rate tolerance is set too tightly; or the - * rounded rate upon success. + * Change the ARM MPU clock rate to the rate specified on the command + * line, if one was specified. @mpurate_ck_name should be + * "virt_prcm_set" on OMAP2xxx and "dpll1_ck" on OMAP34xx/OMAP36xx. + * XXX Does not handle voltage scaling - on OMAP2xxx this is currently + * handled by the virt_prcm_set clock, but this should be handled by + * the OPP layer. XXX This is intended to be handled by the OPP layer + * code in the near future and should be removed from the clock code. + * Returns -EINVAL if 'mpurate' is zero or if clk_set_rate() rejects + * the rate, -ENOENT if the struct clk referred to by @mpurate_ck_name + * cannot be found, or 0 upon success. */ -long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate) +int __init omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name) { - int m, n, r, e, scaled_max_m; - unsigned long scaled_rt_rp, new_rate; - int min_e = -1, min_e_m = -1, min_e_n = -1; - struct dpll_data *dd; + struct clk *mpurate_ck; + int r; - if (!clk || !clk->dpll_data) - return ~0; - - dd = clk->dpll_data; - - pr_debug("clock: starting DPLL round_rate for clock %s, target rate " - "%ld\n", clk->name, target_rate); - - scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR); - scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR; - - dd->last_rounded_rate = 0; - - for (n = dd->min_divider; n <= dd->max_divider; n++) { - - /* Is the (input clk, divider) pair valid for the DPLL? */ - r = _dpll_test_fint(clk, n); - if (r == DPLL_FINT_UNDERFLOW) - break; - else if (r == DPLL_FINT_INVALID) - continue; - - /* Compute the scaled DPLL multiplier, based on the divider */ - m = scaled_rt_rp * n; - - /* - * Since we're counting n up, a m overflow means we - * can bail out completely (since as n increases in - * the next iteration, there's no way that m can - * increase beyond the current m) - */ - if (m > scaled_max_m) - break; - - r = _dpll_test_mult(&m, n, &new_rate, target_rate, - dd->clk_ref->rate); - - /* m can't be set low enough for this n - try with a larger n */ - if (r == DPLL_MULT_UNDERFLOW) - continue; - - e = target_rate - new_rate; - pr_debug("clock: n = %d: m = %d: rate error is %d " - "(new_rate = %ld)\n", n, m, e, new_rate); - - if (min_e == -1 || - min_e >= (int)(abs(e) - dd->rate_tolerance)) { - min_e = e; - min_e_m = m; - min_e_n = n; - - pr_debug("clock: found new least error %d\n", min_e); + if (!mpurate) + return -EINVAL; - /* We found good settings -- bail out now */ - if (min_e <= dd->rate_tolerance) - break; - } - } + mpurate_ck = clk_get(NULL, mpurate_ck_name); + if (WARN(IS_ERR(mpurate_ck), "Failed to get %s.\n", mpurate_ck_name)) + return -ENOENT; - if (min_e < 0) { - pr_debug("clock: error: target rate or tolerance too low\n"); - return ~0; + r = clk_set_rate(mpurate_ck, mpurate); + if (IS_ERR_VALUE(r)) { + WARN(1, "clock: %s: unable to set MPU rate to %d: %d\n", + mpurate_ck->name, mpurate, r); + return -EINVAL; } - dd->last_rounded_m = min_e_m; - dd->last_rounded_n = min_e_n; - dd->last_rounded_rate = _dpll_compute_new_rate(dd->clk_ref->rate, - min_e_m, min_e_n); + calibrate_delay(); + recalculate_root_clocks(); - pr_debug("clock: final least error: e = %d, m = %d, n = %d\n", - min_e, min_e_m, min_e_n); - pr_debug("clock: final rate: %ld (target rate: %ld)\n", - dd->last_rounded_rate, target_rate); + clk_put(mpurate_ck); - return dd->last_rounded_rate; + return 0; } -/*------------------------------------------------------------------------- - * Omap2 clock reset and init functions - *-------------------------------------------------------------------------*/ - -#ifdef CONFIG_OMAP_RESET_CLOCKS -void omap2_clk_disable_unused(struct clk *clk) +/** + * omap2_clk_print_new_rates - print summary of current clock tree rates + * @hfclkin_ck_name: clk name for the off-chip HF oscillator + * @core_ck_name: clk name for the on-chip CORE_CLK + * @mpu_ck_name: clk name for the ARM MPU clock + * + * Prints a short message to the console with the HFCLKIN oscillator + * rate, the rate of the CORE clock, and the rate of the ARM MPU clock. + * Called by the boot-time MPU rate switching code. XXX This is intended + * to be handled by the OPP layer code in the near future and should be + * removed from the clock code. No return value. + */ +void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name, + const char *core_ck_name, + const char *mpu_ck_name) { - u32 regval32, v; + struct clk *hfclkin_ck, *core_ck, *mpu_ck; + unsigned long hfclkin_rate; - v = (clk->flags & INVERT_ENABLE) ? (1 << clk->enable_bit) : 0; + mpu_ck = clk_get(NULL, mpu_ck_name); + if (WARN(IS_ERR(mpu_ck), "clock: failed to get %s.\n", mpu_ck_name)) + return; - regval32 = __raw_readl(clk->enable_reg); - if ((regval32 & (1 << clk->enable_bit)) == v) + core_ck = clk_get(NULL, core_ck_name); + if (WARN(IS_ERR(core_ck), "clock: failed to get %s.\n", core_ck_name)) return; - printk(KERN_DEBUG "Disabling unused clock \"%s\"\n", clk->name); - if (cpu_is_omap34xx()) { - omap2_clk_enable(clk); - omap2_clk_disable(clk); - } else - _omap2_clk_disable(clk); - if (clk->clkdm != NULL) - pwrdm_clkdm_state_switch(clk->clkdm); -} + hfclkin_ck = clk_get(NULL, hfclkin_ck_name); + if (WARN(IS_ERR(hfclkin_ck), "Failed to get %s.\n", hfclkin_ck_name)) + return; + + hfclkin_rate = clk_get_rate(hfclkin_ck); + + pr_info("Switched to new clocking rate (Crystal/Core/MPU): " + "%ld.%01ld/%ld/%ld MHz\n", + (hfclkin_rate / 1000000), + ((hfclkin_rate / 100000) % 10), + (clk_get_rate(core_ck) / 1000000), + (clk_get_rate(mpu_ck) / 1000000)); +} + +/* Common data */ + +struct clk_functions omap2_clk_functions = { + .clk_enable = omap2_clk_enable, + .clk_disable = omap2_clk_disable, + .clk_round_rate = omap2_clk_round_rate, + .clk_set_rate = omap2_clk_set_rate, + .clk_set_parent = omap2_clk_set_parent, + .clk_disable_unused = omap2_clk_disable_unused, +#ifdef CONFIG_CPU_FREQ + /* These will be removed when the OPP code is integrated */ + .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table, + .clk_exit_cpufreq_table = omap2_clk_exit_cpufreq_table, #endif +}; + |