1 files changed, 143 insertions, 24 deletions

diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 4377a4cf36eb..9a5eb87425fc 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -25,7 +25,6 @@
 #include <linux/mmc/host.h>
 
 #include <plat/mcspi.h>
-#include <plat/mux.h>
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/dma.h>
@@ -33,6 +32,11 @@
 #include <plat/onenand.h>
 #include <plat/gpmc-smc91x.h>
 
+#include <sound/tlv320aic3x.h>
+#include <sound/tpa6130a2-plat.h>
+
+#include <../drivers/staging/iio/light/tsl2563.h>
+
 #include "mux.h"
 #include "hsmmc.h"
 
@@ -45,15 +49,33 @@
 /* list all spi devices here */
 enum {
 	RX51_SPI_WL1251,
+	RX51_SPI_MIPID,		/* LCD panel */
+	RX51_SPI_TSC2005,	/* Touch Controller */
 };
 
 static struct wl12xx_platform_data wl1251_pdata;
 
+#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
+static struct tsl2563_platform_data rx51_tsl2563_platform_data = {
+	.cover_comp_gain = 16,
+};
+#endif
+
 static struct omap2_mcspi_device_config wl1251_mcspi_config = {
 	.turbo_mode	= 0,
 	.single_channel	= 1,
 };
 
+static struct omap2_mcspi_device_config mipid_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,
+};
+
+static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,
+};
+
 static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
 	[RX51_SPI_WL1251] = {
 		.modalias		= "wl1251",
@@ -64,6 +86,22 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
 		.controller_data	= &wl1251_mcspi_config,
 		.platform_data		= &wl1251_pdata,
 	},
+	[RX51_SPI_MIPID] = {
+		.modalias		= "acx565akm",
+		.bus_num		= 1,
+		.chip_select		= 2,
+		.max_speed_hz		= 6000000,
+		.controller_data	= &mipid_mcspi_config,
+	},
+	[RX51_SPI_TSC2005] = {
+		.modalias		= "tsc2005",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		/* .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),*/
+		.max_speed_hz		= 6000000,
+		.controller_data	= &tsc2005_mcspi_config,
+		/* .platform_data = &tsc2005_config,*/
+	},
 };
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
@@ -147,6 +185,10 @@ static void __init rx51_add_gpio_keys(void)
 #endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */
 
 static int board_keymap[] = {
+	/*
+	 * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row
+	 * connected to the ground" matrix state.
+	 */
 	KEY(0, 0, KEY_Q),
 	KEY(0, 1, KEY_O),
 	KEY(0, 2, KEY_P),
@@ -154,6 +196,7 @@ static int board_keymap[] = {
 	KEY(0, 4, KEY_BACKSPACE),
 	KEY(0, 6, KEY_A),
 	KEY(0, 7, KEY_S),
+
 	KEY(1, 0, KEY_W),
 	KEY(1, 1, KEY_D),
 	KEY(1, 2, KEY_F),
@@ -162,6 +205,7 @@ static int board_keymap[] = {
 	KEY(1, 5, KEY_J),
 	KEY(1, 6, KEY_K),
 	KEY(1, 7, KEY_L),
+
 	KEY(2, 0, KEY_E),
 	KEY(2, 1, KEY_DOT),
 	KEY(2, 2, KEY_UP),
@@ -169,6 +213,8 @@ static int board_keymap[] = {
 	KEY(2, 5, KEY_Z),
 	KEY(2, 6, KEY_X),
 	KEY(2, 7, KEY_C),
+	KEY(2, 8, KEY_F9),
+
 	KEY(3, 0, KEY_R),
 	KEY(3, 1, KEY_V),
 	KEY(3, 2, KEY_B),
@@ -177,20 +223,23 @@ static int board_keymap[] = {
 	KEY(3, 5, KEY_SPACE),
 	KEY(3, 6, KEY_SPACE),
 	KEY(3, 7, KEY_LEFT),
+
 	KEY(4, 0, KEY_T),
 	KEY(4, 1, KEY_DOWN),
 	KEY(4, 2, KEY_RIGHT),
 	KEY(4, 4, KEY_LEFTCTRL),
 	KEY(4, 5, KEY_RIGHTALT),
 	KEY(4, 6, KEY_LEFTSHIFT),
+	KEY(4, 8, KEY_F10),
+
 	KEY(5, 0, KEY_Y),
+	KEY(5, 8, KEY_F11),
+
 	KEY(6, 0, KEY_U),
+
 	KEY(7, 0, KEY_I),
 	KEY(7, 1, KEY_F7),
 	KEY(7, 2, KEY_F8),
-	KEY(0xff, 2, KEY_F9),
-	KEY(0xff, 4, KEY_F10),
-	KEY(0xff, 5, KEY_F11),
 };
 
 static struct matrix_keymap_data board_map_data = {
@@ -272,19 +321,42 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
 	{}	/* Terminator */
 };
 
-static struct regulator_consumer_supply rx51_vmmc1_supply = {
-	.supply   = "vmmc",
-	.dev_name = "mmci-omap-hs.0",
+static struct regulator_consumer_supply rx51_vmmc1_supply =
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
+
+static struct regulator_consumer_supply rx51_vaux3_supply =
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1");
+
+static struct regulator_consumer_supply rx51_vsim_supply =
+	REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.1");
+
+static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
+	/* tlv320aic3x analog supplies */
+	REGULATOR_SUPPLY("AVDD", "2-0018"),
+	REGULATOR_SUPPLY("DRVDD", "2-0018"),
+	/* tpa6130a2 */
+	REGULATOR_SUPPLY("Vdd", "2-0060"),
+	/* Keep vmmc as last item. It is not iterated for newer boards */
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"),
 };
 
-static struct regulator_consumer_supply rx51_vmmc2_supply = {
-	.supply   = "vmmc",
-	.dev_name = "mmci-omap-hs.1",
+static struct regulator_consumer_supply rx51_vio_supplies[] = {
+	/* tlv320aic3x digital supplies */
+	REGULATOR_SUPPLY("IOVDD", "2-0018"),
+	REGULATOR_SUPPLY("DVDD", "2-0018"),
 };
 
-static struct regulator_consumer_supply rx51_vsim_supply = {
-	.supply   = "vmmc_aux",
-	.dev_name = "mmci-omap-hs.1",
+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+extern struct platform_device rx51_display_device;
+#endif
+
+static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+	{
+		.supply	= "vdds_sdi",
+		.dev	= &rx51_display_device.dev,
+	},
+#endif
 };
 
 static struct regulator_init_data rx51_vaux1 = {
@@ -292,11 +364,14 @@ static struct regulator_init_data rx51_vaux1 = {
 		.name			= "V28",
 		.min_uV			= 2800000,
 		.max_uV			= 2800000,
+		.always_on		= true, /* due battery cover sensor */
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vaux1_consumers),
+	.consumer_supplies	= rx51_vaux1_consumers,
 };
 
 static struct regulator_init_data rx51_vaux2 = {
@@ -338,7 +413,7 @@ static struct regulator_init_data rx51_vaux3_mmc = {
 					| REGULATOR_CHANGE_STATUS,
 	},
 	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &rx51_vmmc2_supply,
+	.consumer_supplies	= &rx51_vaux3_supply,
 };
 
 static struct regulator_init_data rx51_vaux4 = {
@@ -370,9 +445,9 @@ static struct regulator_init_data rx51_vmmc1 = {
 
 static struct regulator_init_data rx51_vmmc2 = {
 	.constraints = {
-		.name			= "VMMC2_30",
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
+		.name			= "V28_A",
+		.min_uV			= 2800000,
+		.max_uV			= 3000000,
 		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
@@ -380,8 +455,8 @@ static struct regulator_init_data rx51_vmmc2 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &rx51_vmmc2_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vmmc2_supplies),
+	.consumer_supplies	= rx51_vmmc2_supplies,
 };
 
 static struct regulator_init_data rx51_vsim = {
@@ -411,6 +486,20 @@ static struct regulator_init_data rx51_vdac = {
 	},
 };
 
+static struct regulator_init_data rx51_vio = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vio_supplies),
+	.consumer_supplies	= rx51_vio_supplies,
+};
+
 static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
 {
 	/* FIXME this gpio setup is just a placeholder for now */
@@ -618,6 +707,16 @@ static struct twl4030_platform_data rx51_twldata __initdata = {
 	.vmmc1			= &rx51_vmmc1,
 	.vsim			= &rx51_vsim,
 	.vdac			= &rx51_vdac,
+	.vio			= &rx51_vio,
+};
+
+static struct aic3x_pdata rx51_aic3x_data __initdata = {
+	.gpio_reset		= 60,
+};
+
+static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata = {
+	.id			= TPA6130A2,
+	.power_gpio		= 98,
 };
 
 static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
@@ -629,18 +728,38 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
 	},
 };
 
+static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+		.platform_data = &rx51_aic3x_data,
+	},
+#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
+	{
+		I2C_BOARD_INFO("tsl2563", 0x29),
+		.platform_data = &rx51_tsl2563_platform_data,
+	},
+#endif
+	{
+		I2C_BOARD_INFO("tpa6130a2", 0x60),
+		.platform_data = &rx51_tpa6130a2_data,
+	}
+};
+
 static int __init rx51_i2c_init(void)
 {
 	if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
-	    system_rev >= SYSTEM_REV_B_USES_VAUX3)
+	    system_rev >= SYSTEM_REV_B_USES_VAUX3) {
 		rx51_twldata.vaux3 = &rx51_vaux3_mmc;
-	else {
+		/* Only older boards use VMMC2 for internal MMC */
+		rx51_vmmc2.num_consumer_supplies--;
+	} else {
 		rx51_twldata.vaux3 = &rx51_vaux3_cam;
-		rx51_twldata.vmmc2 = &rx51_vmmc2;
 	}
+	rx51_twldata.vmmc2 = &rx51_vmmc2;
 	omap_register_i2c_bus(1, 2200, rx51_peripherals_i2c_board_info_1,
-			ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
-	omap_register_i2c_bus(2, 100, NULL, 0);
+			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
+	omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
+			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
 	omap_register_i2c_bus(3, 400, NULL, 0);
 	return 0;
 }