diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-rx51-peripherals.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-rx51-peripherals.c | 188 |
1 files changed, 150 insertions, 38 deletions
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 88bd6f7705f0..0c9e0f28ed07 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -39,6 +39,7 @@ #include <sound/tpa6130a2-plat.h> #include <media/radio-si4713.h> #include <media/si4713.h> +#include <linux/leds-lp5523.h> #include <../drivers/staging/iio/light/tsl2563.h> @@ -53,6 +54,7 @@ #define RX51_WL1251_IRQ_GPIO 42 #define RX51_FMTX_RESET_GPIO 163 #define RX51_FMTX_IRQ 53 +#define RX51_LP5523_CHIP_EN_GPIO 41 #define RX51_USB_TRANSCEIVER_RST_GPIO 67 @@ -71,6 +73,64 @@ static struct tsl2563_platform_data rx51_tsl2563_platform_data = { }; #endif +#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) +static struct lp5523_led_config rx51_lp5523_led_config[] = { + { + .chan_nr = 0, + .led_current = 50, + }, { + .chan_nr = 1, + .led_current = 50, + }, { + .chan_nr = 2, + .led_current = 50, + }, { + .chan_nr = 3, + .led_current = 50, + }, { + .chan_nr = 4, + .led_current = 50, + }, { + .chan_nr = 5, + .led_current = 50, + }, { + .chan_nr = 6, + .led_current = 50, + }, { + .chan_nr = 7, + .led_current = 50, + }, { + .chan_nr = 8, + .led_current = 50, + } +}; + +static int rx51_lp5523_setup(void) +{ + return gpio_request_one(RX51_LP5523_CHIP_EN_GPIO, GPIOF_DIR_OUT, + "lp5523_enable"); +} + +static void rx51_lp5523_release(void) +{ + gpio_free(RX51_LP5523_CHIP_EN_GPIO); +} + +static void rx51_lp5523_enable(bool state) +{ + gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state); +} + +static struct lp5523_platform_data rx51_lp5523_platform_data = { + .led_config = rx51_lp5523_led_config, + .num_channels = ARRAY_SIZE(rx51_lp5523_led_config), + .clock_mode = LP5523_CLOCK_AUTO, + .setup_resources = rx51_lp5523_setup, + .release_resources = rx51_lp5523_release, + .enable = rx51_lp5523_enable, +}; +#endif + static struct omap2_mcspi_device_config wl1251_mcspi_config = { .turbo_mode = 0, .single_channel = 1, @@ -288,10 +348,6 @@ static struct twl4030_keypad_data rx51_kp_data = { .rep = 1, }; -static struct twl4030_madc_platform_data rx51_madc_data = { - .irq_line = 1, -}; - /* Enable input logic and pull all lines up when eMMC is on. */ static struct omap_board_mux rx51_mmc2_on_mux[] = { OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), @@ -358,14 +414,17 @@ static struct omap2_hsmmc_info mmc[] __initdata = { {} /* Terminator */ }; -static struct regulator_consumer_supply rx51_vmmc1_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); +static struct regulator_consumer_supply rx51_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), +}; -static struct regulator_consumer_supply rx51_vaux3_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); +static struct regulator_consumer_supply rx51_vaux3_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), +}; -static struct regulator_consumer_supply rx51_vsim_supply = - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"); +static struct regulator_consumer_supply rx51_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"), +}; static struct regulator_consumer_supply rx51_vmmc2_supplies[] = { /* tlv320aic3x analog supplies */ @@ -395,10 +454,6 @@ static struct regulator_consumer_supply rx51_vaux1_consumers[] = { REGULATOR_SUPPLY("vdd", "2-0063"), }; -static struct regulator_consumer_supply rx51_vdac_supply[] = { - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), -}; - static struct regulator_init_data rx51_vaux1 = { .constraints = { .name = "V28", @@ -452,8 +507,8 @@ static struct regulator_init_data rx51_vaux3_mmc = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &rx51_vaux3_supply, + .num_consumer_supplies = ARRAY_SIZE(rx51_vaux3_supply), + .consumer_supplies = rx51_vaux3_supply, }; static struct regulator_init_data rx51_vaux4 = { @@ -479,8 +534,8 @@ static struct regulator_init_data rx51_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &rx51_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc1_supply), + .consumer_supplies = rx51_vmmc1_supply, }; static struct regulator_init_data rx51_vmmc2 = { @@ -500,24 +555,35 @@ static struct regulator_init_data rx51_vmmc2 = { .consumer_supplies = rx51_vmmc2_supplies, }; -static struct regulator_init_data rx51_vsim = { +static struct regulator_init_data rx51_vpll1 = { .constraints = { - .name = "VMMC2_IO_18", + .name = "VPLL", .min_uV = 1800000, .max_uV = 1800000, .apply_uV = true, + .always_on = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, +}; + +static struct regulator_init_data rx51_vpll2 = { + .constraints = { + .name = "VSDI_CSI", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .always_on = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, }, - .num_consumer_supplies = 1, - .consumer_supplies = &rx51_vsim_supply, }; -static struct regulator_init_data rx51_vdac = { +static struct regulator_init_data rx51_vsim = { .constraints = { - .name = "VDAC", + .name = "VMMC2_IO_18", .min_uV = 1800000, .max_uV = 1800000, .apply_uV = true, @@ -526,8 +592,8 @@ static struct regulator_init_data rx51_vdac = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = rx51_vdac_supply, + .num_consumer_supplies = ARRAY_SIZE(rx51_vsim_supply), + .consumer_supplies = rx51_vsim_supply, }; static struct regulator_init_data rx51_vio = { @@ -544,6 +610,43 @@ static struct regulator_init_data rx51_vio = { .consumer_supplies = rx51_vio_supplies, }; +static struct regulator_init_data rx51_vintana1 = { + .constraints = { + .name = "VINTANA1", + .min_uV = 1500000, + .max_uV = 1500000, + .always_on = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, +}; + +static struct regulator_init_data rx51_vintana2 = { + .constraints = { + .name = "VINTANA2", + .min_uV = 2750000, + .max_uV = 2750000, + .apply_uV = true, + .always_on = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, +}; + +static struct regulator_init_data rx51_vintdig = { + .constraints = { + .name = "VINTDIG", + .min_uV = 1500000, + .max_uV = 1500000, + .always_on = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, +}; + static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = { .gpio_reset = RX51_FMTX_RESET_GPIO, }; @@ -600,10 +703,6 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = { .setup = rx51_twlgpio_setup, }; -static struct twl4030_usb_data rx51_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static struct twl4030_ins sleep_on_seq[] __initdata = { /* * Turn off everything @@ -775,14 +874,9 @@ struct twl4030_codec_data rx51_codec_data __initdata = { }; static struct twl4030_platform_data rx51_twldata __initdata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ .gpio = &rx51_gpio_data, .keypad = &rx51_kp_data, - .madc = &rx51_madc_data, - .usb = &rx51_usb_data, .power = &rx51_t2scripts_data, .codec = &rx51_codec_data, @@ -790,8 +884,12 @@ static struct twl4030_platform_data rx51_twldata __initdata = { .vaux2 = &rx51_vaux2, .vaux4 = &rx51_vaux4, .vmmc1 = &rx51_vmmc1, + .vpll1 = &rx51_vpll1, + .vpll2 = &rx51_vpll2, .vsim = &rx51_vsim, - .vdac = &rx51_vdac, + .vintana1 = &rx51_vintana1, + .vintana2 = &rx51_vintana2, + .vintdig = &rx51_vintdig, .vio = &rx51_vio, }; @@ -830,6 +928,12 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { .platform_data = &rx51_tsl2563_platform_data, }, #endif +#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) + { + I2C_BOARD_INFO("lp5523", 0x32), + .platform_data = &rx51_lp5523_platform_data, + }, +#endif { I2C_BOARD_INFO("tpa6130a2", 0x60), .platform_data = &rx51_tpa6130a2_data, @@ -847,6 +951,13 @@ static int __init rx51_i2c_init(void) rx51_twldata.vaux3 = &rx51_vaux3_cam; } rx51_twldata.vmmc2 = &rx51_vmmc2; + omap3_pmic_get_config(&rx51_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, + TWL_COMMON_REGULATOR_VDAC); + + rx51_twldata.vdac->constraints.apply_uV = true; + rx51_twldata.vdac->constraints.name = "VDAC"; + omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata); omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); @@ -973,6 +1084,7 @@ error: void __init rx51_peripherals_init(void) { rx51_i2c_init(); + regulator_has_full_constraints(); gpmc_onenand_init(board_onenand_data); board_smc91x_init(); rx51_add_gpio_keys(); |