diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-overo.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-overo.c | 104 |
1 files changed, 25 insertions, 79 deletions
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 175e1ab2b04d..4cf7aeabab86 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -46,6 +46,7 @@ #include <plat/common.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> +#include <video/omap-panel-dvi.h> #include <plat/gpmc.h> #include <mach/hardware.h> #include <plat/nand.h> @@ -74,15 +75,16 @@ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) /* fixed regulator for ads7846 */ -static struct regulator_consumer_supply ads7846_supply = - REGULATOR_SUPPLY("vcc", "spi1.0"); +static struct regulator_consumer_supply ads7846_supply[] = { + REGULATOR_SUPPLY("vcc", "spi1.0"), +}; static struct regulator_init_data vads7846_regulator = { .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &ads7846_supply, + .num_consumer_supplies = ARRAY_SIZE(ads7846_supply), + .consumer_supplies = ads7846_supply, }; static struct fixed_voltage_config vads7846 = { @@ -181,16 +183,16 @@ static void overo_panel_disable_dvi(struct omap_dss_device *dssdev) dvi_enabled = 0; } -static struct panel_generic_dpi_data dvi_panel = { - .name = "generic", +static struct panel_dvi_platform_data dvi_panel = { .platform_enable = overo_panel_enable_dvi, .platform_disable = overo_panel_disable_dvi, + .i2c_bus_num = 3, }; static struct omap_dss_device overo_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "generic_dpi_panel", + .driver_name = "dvi", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; @@ -264,14 +266,6 @@ static struct omap_dss_board_info overo_dss_data = { .default_device = &overo_dvi_device, }; -static struct regulator_consumer_supply overo_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); - -static struct regulator_consumer_supply overo_vdds_dsi_supply[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), -}; - static struct mtd_partition overo_nand_partitions[] = { { .name = "xloader", @@ -319,8 +313,8 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct regulator_consumer_supply overo_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply overo_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) @@ -415,8 +409,6 @@ static int overo_twl_gpio_setup(struct device *dev, { omap2_hsmmc_init(mmc); - overo_vmmc1_supply.dev = mmc[0].dev; - #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -433,10 +425,6 @@ static struct twl4030_gpio_platform_data overo_gpio_data = { .setup = overo_twl_gpio_setup, }; -static struct twl4030_usb_data overo_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static struct regulator_init_data overo_vmmc1 = { .constraints = { .min_uV = 1850000, @@ -447,59 +435,23 @@ static struct regulator_init_data overo_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &overo_vmmc1_supply, -}; - -/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ -static struct regulator_init_data overo_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &overo_vdda_dac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_init_data overo_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(overo_vdds_dsi_supply), - .consumer_supplies = overo_vdds_dsi_supply, -}; - -static struct twl4030_codec_audio_data overo_audio_data; - -static struct twl4030_codec_data overo_codec_data = { - .audio_mclk = 26000000, - .audio = &overo_audio_data, + .num_consumer_supplies = ARRAY_SIZE(overo_vmmc1_supply), + .consumer_supplies = overo_vmmc1_supply, }; static struct twl4030_platform_data overo_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, .gpio = &overo_gpio_data, - .usb = &overo_usb_data, - .codec = &overo_codec_data, .vmmc1 = &overo_vmmc1, - .vdac = &overo_vdac, - .vpll2 = &overo_vpll2, }; static int __init overo_i2c_init(void) { + omap3_pmic_get_config(&overo_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + + overo_twldata.vpll2->constraints.name = "VDVI"; + omap3_pmic_init("tps65950", &overo_twldata); /* i2c2 pins are used for gpio */ omap_register_i2c_bus(3, 400, NULL, 0); @@ -527,13 +479,6 @@ static int __init overo_spi_init(void) return 0; } -static void __init overo_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); -} - static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, @@ -563,12 +508,13 @@ static void __init overo_init(void) overo_i2c_init(); omap_display_init(&overo_dss_data); omap_serial_init(); + omap_sdrc_init(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); omap_nand_flash_init(0, overo_nand_partitions, ARRAY_SIZE(overo_nand_partitions)); usb_musb_init(NULL); usbhs_init(&usbhs_bdata); overo_spi_init(); - overo_ads7846_init(); overo_init_smsc911x(); overo_display_init(); overo_init_led(); @@ -611,11 +557,11 @@ static void __init overo_init(void) } MACHINE_START(OVERO, "Gumstix Overo") - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = overo_init_early, - .init_irq = omap_init_irq, + .init_early = omap35xx_init_early, + .init_irq = omap3_init_irq, .init_machine = overo_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END |