1 files changed, 0 insertions, 337 deletions
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
deleted file mode 100644
index 4eb5e6f2f7f5..000000000000
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ /dev/null
@@ -1,337 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-cm-t3517.c
- *
- * Support for the CompuLab CM-T3517 modules
- *
- * Copyright (C) 2010 CompuLab, Ltd.
- * Author: Igor Grinberg <grinberg@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/rtc-v3020.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mmc/host.h>
-#include <linux/can/platform/ti_hecc.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include <linux/platform_data/mtd-nand-omap2.h>
-#include "gpmc.h"
-
-#include "am35xx.h"
-
-#include "mux.h"
-#include "control.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-#include "am35xx-emac.h"
-#include "gpmc-nand.h"
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led cm_t3517_leds[] = {
-	[0] = {
-		.gpio			= 186,
-		.name			= "cm-t3517:green",
-		.default_trigger	= "heartbeat",
-		.active_low		= 0,
-	},
-};
-
-static struct gpio_led_platform_data cm_t3517_led_pdata = {
-	.num_leds	= ARRAY_SIZE(cm_t3517_leds),
-	.leds		= cm_t3517_leds,
-};
-
-static struct platform_device cm_t3517_led_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &cm_t3517_led_pdata,
-	},
-};
-
-static void __init cm_t3517_init_leds(void)
-{
-	platform_device_register(&cm_t3517_led_device);
-}
-#else
-static inline void cm_t3517_init_leds(void) {}
-#endif
-
-#if defined(CONFIG_CAN_TI_HECC) || defined(CONFIG_CAN_TI_HECC_MODULE)
-static struct resource cm_t3517_hecc_resources[] = {
-	{
-		.start	= AM35XX_IPSS_HECC_BASE,
-		.end	= AM35XX_IPSS_HECC_BASE + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 24 + OMAP_INTC_START,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct ti_hecc_platform_data cm_t3517_hecc_pdata = {
-	.scc_hecc_offset	= AM35XX_HECC_SCC_HECC_OFFSET,
-	.scc_ram_offset		= AM35XX_HECC_SCC_RAM_OFFSET,
-	.hecc_ram_offset	= AM35XX_HECC_RAM_OFFSET,
-	.mbx_offset		= AM35XX_HECC_MBOX_OFFSET,
-	.int_line		= AM35XX_HECC_INT_LINE,
-	.version		= AM35XX_HECC_VERSION,
-};
-
-static struct platform_device cm_t3517_hecc_device = {
-	.name		= "ti_hecc",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(cm_t3517_hecc_resources),
-	.resource	= cm_t3517_hecc_resources,
-	.dev		= {
-		.platform_data	= &cm_t3517_hecc_pdata,
-	},
-};
-
-static void cm_t3517_init_hecc(void)
-{
-	platform_device_register(&cm_t3517_hecc_device);
-}
-#else
-static inline void cm_t3517_init_hecc(void) {}
-#endif
-
-#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-static struct omap2_hsmmc_info cm_t3517_mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= 144,
-		.gpio_wp	= 59,
-	},
-	{
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{}	/* Terminator */
-};
-#else
-#define cm_t3517_mmc NULL
-#endif
-
-#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
-#define RTC_IO_GPIO		(153)
-#define RTC_WR_GPIO		(154)
-#define RTC_RD_GPIO		(53)
-#define RTC_CS_GPIO		(163)
-#define RTC_CS_EN_GPIO		(160)
-
-struct v3020_platform_data cm_t3517_v3020_pdata = {
-	.use_gpio	= 1,
-	.gpio_cs	= RTC_CS_GPIO,
-	.gpio_wr	= RTC_WR_GPIO,
-	.gpio_rd	= RTC_RD_GPIO,
-	.gpio_io	= RTC_IO_GPIO,
-};
-
-static struct platform_device cm_t3517_rtc_device = {
-	.name		= "v3020",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &cm_t3517_v3020_pdata,
-	}
-};
-
-static void __init cm_t3517_init_rtc(void)
-{
-	int err;
-
-	err = gpio_request_one(RTC_CS_EN_GPIO, GPIOF_OUT_INIT_HIGH,
-			       "rtc cs en");
-	if (err) {
-		pr_err("CM-T3517: rtc cs en gpio request failed: %d\n", err);
-		return;
-	}
-
-	platform_device_register(&cm_t3517_rtc_device);
-}
-#else
-static inline void cm_t3517_init_rtc(void) {}
-#endif
-
-#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
-#define HSUSB1_RESET_GPIO	(146)
-#define HSUSB2_RESET_GPIO	(147)
-#define USB_HUB_RESET_GPIO	(152)
-
-static struct usbhs_phy_data phy_data[] __initdata = {
-	{
-		.port = 1,
-		.reset_gpio = HSUSB1_RESET_GPIO,
-		.vcc_gpio = -EINVAL,
-	},
-	{
-		.port = 2,
-		.reset_gpio = HSUSB2_RESET_GPIO,
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_omap_platform_data cm_t3517_ehci_pdata __initdata = {
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-static int __init cm_t3517_init_usbh(void)
-{
-	int err;
-
-	err = gpio_request_one(USB_HUB_RESET_GPIO, GPIOF_OUT_INIT_LOW,
-			       "usb hub rst");
-	if (err) {
-		pr_err("CM-T3517: usb hub rst gpio request failed: %d\n", err);
-	} else {
-		udelay(10);
-		gpio_set_value(USB_HUB_RESET_GPIO, 1);
-		msleep(1);
-	}
-
-	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
-	usbhs_init(&cm_t3517_ehci_pdata);
-
-	return 0;
-}
-#else
-static inline int cm_t3517_init_usbh(void)
-{
-	return 0;
-}
-#endif
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-static struct mtd_partition cm_t3517_nand_partitions[] = {
-	{
-		.name           = "xloader",
-		.offset         = 0,			/* Offset = 0x00000 */
-		.size           = 4 * NAND_BLOCK_SIZE,
-		.mask_flags     = MTD_WRITEABLE
-	},
-	{
-		.name           = "uboot",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size           = 15 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name           = "uboot environment",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
-		.size           = 2 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name           = "linux",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x2A0000 */
-		.size           = 32 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name           = "rootfs",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x6A0000 */
-		.size           = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct omap_nand_platform_data cm_t3517_nand_data = {
-	.parts			= cm_t3517_nand_partitions,
-	.nr_parts		= ARRAY_SIZE(cm_t3517_nand_partitions),
-	.cs			= 0,
-};
-
-static void __init cm_t3517_init_nand(void)
-{
-	if (gpmc_nand_init(&cm_t3517_nand_data, NULL) < 0)
-		pr_err("CM-T3517: NAND initialization failed\n");
-}
-#else
-static inline void cm_t3517_init_nand(void) {}
-#endif
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	/* GPIO186 - Green LED */
-	OMAP3_MUX(SYS_CLKOUT2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-
-	/* RTC GPIOs: */
-	/* IO - GPIO153 */
-	OMAP3_MUX(MCBSP4_DR, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-	/* WR# - GPIO154 */
-	OMAP3_MUX(MCBSP4_DX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-	/* RD# - GPIO53 */
-	OMAP3_MUX(GPMC_NCS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-	/* CS# - GPIO163 */
-	OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-	/* CS EN - GPIO160 */
-	OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-
-	/* HSUSB1 RESET */
-	OMAP3_MUX(UART2_TX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	/* HSUSB2 RESET */
-	OMAP3_MUX(UART2_RX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	/* CM-T3517 USB HUB nRESET */
-	OMAP3_MUX(MCBSP4_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-
-	/* CD - GPIO144 and WP - GPIO59 for MMC1 - SB-T35 */
-	OMAP3_MUX(UART2_CTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(GPMC_CLK, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
-
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static void __init cm_t3517_init(void)
-{
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_serial_init();
-	omap_sdrc_init(NULL, NULL);
-	cm_t3517_init_leds();
-	cm_t3517_init_nand();
-	cm_t3517_init_rtc();
-	cm_t3517_init_usbh();
-	cm_t3517_init_hecc();
-	am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
-	omap_hsmmc_init(cm_t3517_mmc);
-}
-
-MACHINE_START(CM_T3517, "Compulab CM-T3517")
-	.atag_offset	= 0x100,
-	.reserve        = omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= am35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= cm_t3517_init,
-	.init_late	= am35xx_init_late,
-	.init_time	= omap3_gptimer_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END