1 files changed, 0 insertions, 150 deletions
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
deleted file mode 100644
index 8168ddabaeda..000000000000
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * Support for AM3517/05 Craneboard
- * http://www.mistralsolutions.com/products/craneboard.php
- *
- * Copyright (C) 2010 Mistral Solutions Pvt Ltd. <www.mistralsolutions.com>
- * Author: R.Srinath <srinath@mistralsolutions.com>
- *
- * Based on mach-omap2/board-am3517evm.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as  published by the
- * Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
- * whether express or implied; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/mfd/tps65910.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/omap-gpmc.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "common-board-devices.h"
-#include "board-flash.h"
-
-#include "am35xx-emac.h"
-#include "mux.h"
-#include "control.h"
-
-#define GPIO_USB_POWER		35
-#define GPIO_USB_NRESET		38
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct usbhs_phy_data phy_data[] __initdata = {
-	{
-		.port = 1,
-		.reset_gpio = GPIO_USB_NRESET,
-		.vcc_gpio = GPIO_USB_POWER,
-		.vcc_polarity = 1,
-	},
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-static struct mtd_partition crane_nand_partitions[] = {
-	{
-		.name		= "X-Loader",
-		.offset		= 0,
-		.size		= 4 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "U-Boot",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 14 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "U-Boot Env",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 2 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name		= "Kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 40 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name		= "File System",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct tps65910_board tps65910_pdata = {
-	.irq = 7 + OMAP_INTC_START,
-	.en_ck32k_xtal = true,
-};
-
-static struct i2c_board_info __initdata tps65910_board_info[] = {
-	{
-		I2C_BOARD_INFO("tps65910", 0x2d),
-		.platform_data = &tps65910_pdata,
-	},
-};
-
-static void __init am3517_crane_i2c_init(void)
-{
-	omap_register_i2c_bus(1, 2600, tps65910_board_info,
-			ARRAY_SIZE(tps65910_board_info));
-}
-
-static void __init am3517_crane_init(void)
-{
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_serial_init();
-	omap_sdrc_init(NULL, NULL);
-	board_nand_init(crane_nand_partitions,
-			ARRAY_SIZE(crane_nand_partitions), 0,
-			NAND_BUSWIDTH_16, NULL);
-	am3517_crane_i2c_init();
-
-	/* Configure GPIO for EHCI port */
-	if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) {
-		pr_err("Can not configure mux for GPIO_USB_NRESET %d\n",
-			GPIO_USB_NRESET);
-		return;
-	}
-
-	if (omap_mux_init_gpio(GPIO_USB_POWER, OMAP_PIN_OUTPUT)) {
-		pr_err("Can not configure mux for GPIO_USB_POWER %d\n",
-			GPIO_USB_POWER);
-		return;
-	}
-
-	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
-	usbhs_init(&usbhs_bdata);
-	am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
-}
-
-MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= am35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.init_machine	= am3517_crane_init,
-	.init_late	= am35xx_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END