diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-3430sdp.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-3430sdp.c | 37 |
1 files changed, 21 insertions, 16 deletions
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index f474a80b8867..4e3742c512b8 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -24,6 +24,7 @@ #include <linux/regulator/machine.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/mmc/host.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -38,15 +39,14 @@ #include <plat/gpmc.h> #include <plat/display.h> -#include <plat/control.h> #include <plat/gpmc-smc91x.h> -#include <mach/board-sdp.h> - +#include "board-flash.h" #include "mux.h" #include "sdram-qimonda-hyb18m512160af-6.h" #include "hsmmc.h" #include "pm.h" +#include "control.h" #define CONFIG_DISABLE_HFCLK 1 @@ -76,7 +76,7 @@ static struct cpuidle_params omap3_cpuidle_params_table[] = { {1, 10000, 30000, 300000}, }; -static int board_keymap[] = { +static uint32_t board_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), KEY(0, 2, KEY_A), @@ -353,12 +353,12 @@ static struct omap2_hsmmc_info mmc[] = { /* 8 bits (default) requires S6.3 == ON, * so the SIM card isn't used; else 4 bits. */ - .wires = 8, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 4, }, { .mmc = 2, - .wires = 8, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 7, }, {} /* Terminator */ @@ -667,6 +667,18 @@ static struct omap_board_mux board_mux[] __initdata = { #define board_mux NULL #endif +/* + * SDP3430 V2 Board CS organization + * Different from SDP3430 V1. Now 4 switches used to specify CS + * + * See also the Switch S8 settings in the comments. + */ +static char chip_sel_3430[][GPMC_CS_NUM] = { + {PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */ + {PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */ + {PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */ +}; + static struct mtd_partition sdp_nor_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -797,24 +809,17 @@ static void __init omap_3430sdp_init(void) omap_serial_init(); usb_musb_init(&musb_board_data); board_smc91x_init(); - sdp_flash_init(sdp_flash_partitions); + board_flash_init(sdp_flash_partitions, chip_sel_3430); sdp3430_display_init(); enable_board_wakeup_source(); usb_ehci_init(&ehci_pdata); } -static void __init omap_3430sdp_map_io(void) -{ - omap2_set_globals_343x(); - omap34xx_map_common_io(); -} - MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") /* Maintainer: Syed Khasim - Texas Instruments Inc */ - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, - .map_io = omap_3430sdp_map_io, + .map_io = omap3_map_io, + .reserve = omap_reserve, .init_irq = omap_3430sdp_init_irq, .init_machine = omap_3430sdp_init, .timer = &omap_timer, |