summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap1/timer32k.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap1/timer32k.c')
-rw-r--r--arch/arm/mach-omap1/timer32k.c100
1 files changed, 95 insertions, 5 deletions
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 780fdf03c3ce..410d17d1d443 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -45,15 +45,13 @@
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/io.h>
+#include <linux/sched_clock.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
-#include <plat/counter-32k.h>
-
-#include <mach/hardware.h>
-
+#include "hardware.h"
#include "common.h"
/*
@@ -159,6 +157,98 @@ static __init void omap_init_32k_timer(void)
OMAP_32K_TICKS_PER_SEC, 1, 0xfffffffe);
}
+/* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
+#define OMAP2_32KSYNCNT_REV_OFF 0x0
+#define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30)
+#define OMAP2_32KSYNCNT_CR_OFF_LOW 0x10
+#define OMAP2_32KSYNCNT_CR_OFF_HIGH 0x30
+
+/*
+ * 32KHz clocksource ... always available, on pretty most chips except
+ * OMAP 730 and 1510. Other timers could be used as clocksources, with
+ * higher resolution in free-running counter modes (e.g. 12 MHz xtal),
+ * but systems won't necessarily want to spend resources that way.
+ */
+static void __iomem *sync32k_cnt_reg;
+
+static u64 notrace omap_32k_read_sched_clock(void)
+{
+ return sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0;
+}
+
+/**
+ * omap_read_persistent_clock64 - Return time from a persistent clock.
+ *
+ * Reads the time from a source which isn't disabled during PM, the
+ * 32k sync timer. Convert the cycles elapsed since last read into
+ * nsecs and adds to a monotonically increasing timespec64.
+ */
+static struct timespec64 persistent_ts;
+static cycles_t cycles;
+static unsigned int persistent_mult, persistent_shift;
+
+static void omap_read_persistent_clock64(struct timespec64 *ts)
+{
+ unsigned long long nsecs;
+ cycles_t last_cycles;
+
+ last_cycles = cycles;
+ cycles = sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0;
+
+ nsecs = clocksource_cyc2ns(cycles - last_cycles,
+ persistent_mult, persistent_shift);
+
+ timespec64_add_ns(&persistent_ts, nsecs);
+
+ *ts = persistent_ts;
+}
+
+/**
+ * omap_init_clocksource_32k - setup and register counter 32k as a
+ * kernel clocksource
+ * @pbase: base addr of counter_32k module
+ * @size: size of counter_32k to map
+ *
+ * Returns 0 upon success or negative error code upon failure.
+ *
+ */
+static int __init omap_init_clocksource_32k(void __iomem *vbase)
+{
+ int ret;
+
+ /*
+ * 32k sync Counter IP register offsets vary between the
+ * highlander version and the legacy ones.
+ * The 'SCHEME' bits(30-31) of the revision register is used
+ * to identify the version.
+ */
+ if (readl_relaxed(vbase + OMAP2_32KSYNCNT_REV_OFF) &
+ OMAP2_32KSYNCNT_REV_SCHEME)
+ sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_HIGH;
+ else
+ sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_LOW;
+
+ /*
+ * 120000 rough estimate from the calculations in
+ * __clocksource_update_freq_scale.
+ */
+ clocks_calc_mult_shift(&persistent_mult, &persistent_shift,
+ 32768, NSEC_PER_SEC, 120000);
+
+ ret = clocksource_mmio_init(sync32k_cnt_reg, "32k_counter", 32768,
+ 250, 32, clocksource_mmio_readl_up);
+ if (ret) {
+ pr_err("32k_counter: can't register clocksource\n");
+ return ret;
+ }
+
+ sched_clock_register(omap_32k_read_sched_clock, 32, 32768);
+ register_persistent_clock(omap_read_persistent_clock64);
+ pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
+
+ return 0;
+}
+
/*
* ---------------------------------------------------------------------------
* Timer initialization
@@ -180,7 +270,7 @@ int __init omap_32k_timer_init(void)
sync32k_ick = clk_get(NULL, "omap_32ksync_ick");
if (!IS_ERR(sync32k_ick))
- clk_enable(sync32k_ick);
+ clk_prepare_enable(sync32k_ick);
ret = omap_init_clocksource_32k(base);
}