diff options
Diffstat (limited to 'arch/arm/mach-mx5/board-cpuimx51sd.c')
| -rw-r--r-- | arch/arm/mach-mx5/board-cpuimx51sd.c | 31 |
1 files changed, 18 insertions, 13 deletions
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c index ad931895d8b6..29b180823bf5 100644 --- a/arch/arm/mach-mx5/board-cpuimx51sd.c +++ b/arch/arm/mach-mx5/board-cpuimx51sd.c @@ -42,6 +42,7 @@ #include "devices-imx51.h" #include "devices.h" +#include "cpu_op-mx51.h" #define USBH1_RST IMX_GPIO_NR(2, 28) #define ETH_RST IMX_GPIO_NR(2, 31) @@ -109,7 +110,7 @@ static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = { /* Touchscreen */ /* IRQ */ - _MX51_PAD_CSI1_D8__GPIO3_12 | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP | + _MX51_PAD_GPIO_NAND__GPIO_NAND | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP | PAD_CTL_PKE | PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS), }; @@ -118,15 +119,9 @@ static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static int ts_get_pendown_state(void) -{ - return gpio_get_value(TSC2007_IRQGPIO) ? 0 : 1; -} - static struct tsc2007_platform_data tsc2007_info = { .model = 2007, .x_plate_ohms = 180, - .get_pendown_state = ts_get_pendown_state, }; static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = { @@ -167,7 +162,10 @@ static int initialize_otg_port(struct platform_device *pdev) v |= MX51_USB_PLL_DIV_19_2_MHZ; __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); iounmap(usb_base); - return 0; + + mdelay(10); + + return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY); } static int initialize_usbh1_port(struct platform_device *pdev) @@ -186,13 +184,16 @@ static int initialize_usbh1_port(struct platform_device *pdev) __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET); iounmap(usb_base); - return 0; + + mdelay(10); + + return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_ITC_NO_THRESHOLD); } static struct mxc_usbh_platform_data dr_utmi_config = { .init = initialize_otg_port, .portsc = MXC_EHCI_UTMI_16BIT, - .flags = MXC_EHCI_INTERNAL_PHY, }; static struct fsl_usb2_platform_data usb_pdata = { @@ -203,7 +204,6 @@ static struct fsl_usb2_platform_data usb_pdata = { static struct mxc_usbh_platform_data usbh1_config = { .init = initialize_usbh1_port, .portsc = MXC_EHCI_MODE_ULPI, - .flags = (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD), }; static int otg_mode_host; @@ -242,7 +242,7 @@ static struct mcp251x_platform_data mcp251x_info = { static struct spi_board_info cpuimx51sd_spi_device[] = { { .modalias = "mcp2515", - .max_speed_hz = 6500000, + .max_speed_hz = 10000000, .bus_num = 0, .mode = SPI_MODE_0, .chip_select = 0, @@ -269,6 +269,10 @@ static void __init eukrea_cpuimx51sd_init(void) mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads, ARRAY_SIZE(eukrea_cpuimx51sd_pads)); +#if defined(CONFIG_CPU_FREQ_IMX) + get_cpu_op = mx51_get_cpu_op; +#endif + imx51_add_imx_uart(0, &uart_pdata); imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info); @@ -329,7 +333,8 @@ MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD") /* Maintainer: Eric Bénard <eric@eukrea.com> */ .boot_params = MX51_PHYS_OFFSET + 0x100, .map_io = mx51_map_io, + .init_early = imx51_init_early, .init_irq = mx51_init_irq, - .init_machine = eukrea_cpuimx51sd_init, .timer = &mxc_timer, + .init_machine = eukrea_cpuimx51sd_init, MACHINE_END |