diff options
Diffstat (limited to 'arch/arm/mach-msm')
| -rw-r--r-- | arch/arm/mach-msm/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/mach-msm/proc_comm.c | 110 | ||||
| -rw-r--r-- | arch/arm/mach-msm/proc_comm.h | 165 |
3 files changed, 276 insertions, 0 deletions
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index d12f23655850..ae96ffff494d 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -1,4 +1,5 @@ obj-y += io.o idle.o irq.o timer.o dma.o +obj-y += proc_comm.o # Common code for board init obj-y += common.o diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c new file mode 100644 index 000000000000..915ee704ed3c --- /dev/null +++ b/arch/arm/mach-msm/proc_comm.c @@ -0,0 +1,110 @@ +/* arch/arm/mach-msm/proc_comm.c + * + * Copyright (C) 2007-2008 Google, Inc. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include <mach/msm_iomap.h> +#include <mach/system.h> + +#include "proc_comm.h" + +#define MSM_A2M_INT(n) (MSM_CSR_BASE + 0x400 + (n) * 4) + +static inline void notify_other_proc_comm(void) +{ + writel(1, MSM_A2M_INT(6)); +} + +#define APP_COMMAND 0x00 +#define APP_STATUS 0x04 +#define APP_DATA1 0x08 +#define APP_DATA2 0x0C + +#define MDM_COMMAND 0x10 +#define MDM_STATUS 0x14 +#define MDM_DATA1 0x18 +#define MDM_DATA2 0x1C + +static DEFINE_SPINLOCK(proc_comm_lock); + +/* The higher level SMD support will install this to + * provide a way to check for and handle modem restart. + */ +int (*msm_check_for_modem_crash)(void); + +/* Poll for a state change, checking for possible + * modem crashes along the way (so we don't wait + * forever while the ARM9 is blowing up). + * + * Return an error in the event of a modem crash and + * restart so the msm_proc_comm() routine can restart + * the operation from the beginning. + */ +static int proc_comm_wait_for(void __iomem *addr, unsigned value) +{ + for (;;) { + if (readl(addr) == value) + return 0; + + if (msm_check_for_modem_crash) + if (msm_check_for_modem_crash()) + return -EAGAIN; + } +} + +int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2) +{ + void __iomem *base = MSM_SHARED_RAM_BASE; + unsigned long flags; + int ret; + + spin_lock_irqsave(&proc_comm_lock, flags); + + for (;;) { + if (proc_comm_wait_for(base + MDM_STATUS, PCOM_READY)) + continue; + + writel(cmd, base + APP_COMMAND); + writel(data1 ? *data1 : 0, base + APP_DATA1); + writel(data2 ? *data2 : 0, base + APP_DATA2); + + notify_other_proc_comm(); + + if (proc_comm_wait_for(base + APP_COMMAND, PCOM_CMD_DONE)) + continue; + + if (readl(base + APP_STATUS) != PCOM_CMD_FAIL) { + if (data1) + *data1 = readl(base + APP_DATA1); + if (data2) + *data2 = readl(base + APP_DATA2); + ret = 0; + } else { + ret = -EIO; + } + break; + } + + writel(PCOM_CMD_IDLE, base + APP_COMMAND); + + spin_unlock_irqrestore(&proc_comm_lock, flags); + + return ret; +} + + diff --git a/arch/arm/mach-msm/proc_comm.h b/arch/arm/mach-msm/proc_comm.h new file mode 100644 index 000000000000..834760f25692 --- /dev/null +++ b/arch/arm/mach-msm/proc_comm.h @@ -0,0 +1,165 @@ +/* arch/arm/mach-msm/proc_comm.h + * + * Copyright (c) 2007 QUALCOMM Incorporated + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _ARCH_ARM_MACH_MSM_PROC_COMM_H_ +#define _ARCH_ARM_MACH_MSM_PROC_COMM_H_ + +enum { + PCOM_CMD_IDLE = 0x0, + PCOM_CMD_DONE, + PCOM_RESET_APPS, + PCOM_RESET_CHIP, + PCOM_CONFIG_NAND_MPU, + PCOM_CONFIG_USB_CLKS, + PCOM_GET_POWER_ON_STATUS, + PCOM_GET_WAKE_UP_STATUS, + PCOM_GET_BATT_LEVEL, + PCOM_CHG_IS_CHARGING, + PCOM_POWER_DOWN, + PCOM_USB_PIN_CONFIG, + PCOM_USB_PIN_SEL, + PCOM_SET_RTC_ALARM, + PCOM_NV_READ, + PCOM_NV_WRITE, + PCOM_GET_UUID_HIGH, + PCOM_GET_UUID_LOW, + PCOM_GET_HW_ENTROPY, + PCOM_RPC_GPIO_TLMM_CONFIG_REMOTE, + PCOM_CLKCTL_RPC_ENABLE, + PCOM_CLKCTL_RPC_DISABLE, + PCOM_CLKCTL_RPC_RESET, + PCOM_CLKCTL_RPC_SET_FLAGS, + PCOM_CLKCTL_RPC_SET_RATE, + PCOM_CLKCTL_RPC_MIN_RATE, + PCOM_CLKCTL_RPC_MAX_RATE, + PCOM_CLKCTL_RPC_RATE, + PCOM_CLKCTL_RPC_PLL_REQUEST, + PCOM_CLKCTL_RPC_ENABLED, + PCOM_VREG_SWITCH, + PCOM_VREG_SET_LEVEL, + PCOM_GPIO_TLMM_CONFIG_GROUP, + PCOM_GPIO_TLMM_UNCONFIG_GROUP, + PCOM_NV_WRITE_BYTES_4_7, + PCOM_CONFIG_DISP, + PCOM_GET_FTM_BOOT_COUNT, + PCOM_RPC_GPIO_TLMM_CONFIG_EX, + PCOM_PM_MPP_CONFIG, + PCOM_GPIO_IN, + PCOM_GPIO_OUT, + PCOM_RESET_MODEM, + PCOM_RESET_CHIP_IMM, + PCOM_PM_VID_EN, + PCOM_VREG_PULLDOWN, + PCOM_NUM_CMDS, +}; + +enum { + PCOM_INVALID_STATUS = 0x0, + PCOM_READY, + PCOM_CMD_RUNNING, + PCOM_CMD_SUCCESS, + PCOM_CMD_FAIL, +}; + +/* List of VREGs that support the Pull Down Resistor setting. */ +enum { + PM_VREG_PDOWN_MSMA_ID, + PM_VREG_PDOWN_MSMP_ID, + PM_VREG_PDOWN_MSME1_ID, /* Not supported in Panoramix */ + PM_VREG_PDOWN_MSMC1_ID, /* Not supported in PM6620 */ + PM_VREG_PDOWN_MSMC2_ID, /* Supported in PM7500 only */ + PM_VREG_PDOWN_GP3_ID, /* Supported in PM7500 only */ + PM_VREG_PDOWN_MSME2_ID, /* Supported in PM7500 and Panoramix only */ + PM_VREG_PDOWN_GP4_ID, /* Supported in PM7500 only */ + PM_VREG_PDOWN_GP1_ID, /* Supported in PM7500 only */ + PM_VREG_PDOWN_TCXO_ID, + PM_VREG_PDOWN_PA_ID, + PM_VREG_PDOWN_RFTX_ID, + PM_VREG_PDOWN_RFRX1_ID, + PM_VREG_PDOWN_RFRX2_ID, + PM_VREG_PDOWN_SYNT_ID, + PM_VREG_PDOWN_WLAN_ID, + PM_VREG_PDOWN_USB_ID, + PM_VREG_PDOWN_MMC_ID, + PM_VREG_PDOWN_RUIM_ID, + PM_VREG_PDOWN_MSMC0_ID, /* Supported in PM6610 only */ + PM_VREG_PDOWN_GP2_ID, /* Supported in PM7500 only */ + PM_VREG_PDOWN_GP5_ID, /* Supported in PM7500 only */ + PM_VREG_PDOWN_GP6_ID, /* Supported in PM7500 only */ + PM_VREG_PDOWN_RF_ID, + PM_VREG_PDOWN_RF_VCO_ID, + PM_VREG_PDOWN_MPLL_ID, + PM_VREG_PDOWN_S2_ID, + PM_VREG_PDOWN_S3_ID, + PM_VREG_PDOWN_RFUBM_ID, + + /* new for HAN */ + PM_VREG_PDOWN_RF1_ID, + PM_VREG_PDOWN_RF2_ID, + PM_VREG_PDOWN_RFA_ID, + PM_VREG_PDOWN_CDC2_ID, + PM_VREG_PDOWN_RFTX2_ID, + PM_VREG_PDOWN_USIM_ID, + PM_VREG_PDOWN_USB2P6_ID, + PM_VREG_PDOWN_USB3P3_ID, + PM_VREG_PDOWN_INVALID_ID, + + /* backward compatible enums only */ + PM_VREG_PDOWN_CAM_ID = PM_VREG_PDOWN_GP1_ID, + PM_VREG_PDOWN_MDDI_ID = PM_VREG_PDOWN_GP2_ID, + PM_VREG_PDOWN_RUIM2_ID = PM_VREG_PDOWN_GP3_ID, + PM_VREG_PDOWN_AUX_ID = PM_VREG_PDOWN_GP4_ID, + PM_VREG_PDOWN_AUX2_ID = PM_VREG_PDOWN_GP5_ID, + PM_VREG_PDOWN_BT_ID = PM_VREG_PDOWN_GP6_ID, + + PM_VREG_PDOWN_MSME_ID = PM_VREG_PDOWN_MSME1_ID, + PM_VREG_PDOWN_MSMC_ID = PM_VREG_PDOWN_MSMC1_ID, + PM_VREG_PDOWN_RFA1_ID = PM_VREG_PDOWN_RFRX2_ID, + PM_VREG_PDOWN_RFA2_ID = PM_VREG_PDOWN_RFTX2_ID, + PM_VREG_PDOWN_XO_ID = PM_VREG_PDOWN_TCXO_ID +}; + +/* gpio info for PCOM_RPC_GPIO_TLMM_CONFIG_EX */ + +#define GPIO_ENABLE 0 +#define GPIO_DISABLE 1 + +#define GPIO_INPUT 0 +#define GPIO_OUTPUT 1 + +#define GPIO_NO_PULL 0 +#define GPIO_PULL_DOWN 1 +#define GPIO_KEEPER 2 +#define GPIO_PULL_UP 3 + +#define GPIO_2MA 0 +#define GPIO_4MA 1 +#define GPIO_6MA 2 +#define GPIO_8MA 3 +#define GPIO_10MA 4 +#define GPIO_12MA 5 +#define GPIO_14MA 6 +#define GPIO_16MA 7 + +#define PCOM_GPIO_CFG(gpio, func, dir, pull, drvstr) \ + ((((gpio) & 0x3FF) << 4) | \ + ((func) & 0xf) | \ + (((dir) & 0x1) << 14) | \ + (((pull) & 0x3) << 15) | \ + (((drvstr) & 0xF) << 17)) + +int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2); + +#endif |