diff options
Diffstat (limited to 'arch/arm/mach-kirkwood')
-rw-r--r-- | arch/arm/mach-kirkwood/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/board-dreamplug.c | 152 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/board-dt.c | 151 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/common.c | 11 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/common.h | 15 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/cpuidle.c | 72 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/include/mach/io.h | 2 |
7 files changed, 217 insertions, 187 deletions
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index acbc5e1db06f..e299a9576bf0 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -21,3 +21,4 @@ obj-$(CONFIG_MACH_T5325) += t5325-setup.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o +obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c new file mode 100644 index 000000000000..985453994dd3 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-dreamplug.c @@ -0,0 +1,152 @@ +/* + * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net> + * + * arch/arm/mach-kirkwood/board-dreamplug.c + * + * Marvell DreamPlug Reference Board Init for drivers not converted to + * flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> +#include <linux/spi/orion_spi.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <mach/kirkwood.h> +#include <mach/bridge-regs.h> +#include <plat/mvsdio.h> +#include "common.h" +#include "mpp.h" + +struct mtd_partition dreamplug_partitions[] = { + { + .name = "u-boot", + .size = SZ_512K, + .offset = 0, + }, + { + .name = "u-boot env", + .size = SZ_64K, + .offset = SZ_512K + SZ_512K, + }, + { + .name = "dtb", + .size = SZ_64K, + .offset = SZ_512K + SZ_512K + SZ_512K, + }, +}; + +static const struct flash_platform_data dreamplug_spi_slave_data = { + .type = "mx25l1606e", + .name = "spi_flash", + .parts = dreamplug_partitions, + .nr_parts = ARRAY_SIZE(dreamplug_partitions), +}; + +static struct spi_board_info __initdata dreamplug_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &dreamplug_spi_slave_data, + .irq = -1, + .max_speed_hz = 50000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct mv643xx_eth_platform_data dreamplug_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv643xx_eth_platform_data dreamplug_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(1), +}; + +static struct mv_sata_platform_data dreamplug_sata_data = { + .n_ports = 1, +}; + +static struct mvsdio_platform_data dreamplug_mvsdio_data = { + /* unfortunately the CD signal has not been connected */ +}; + +static struct gpio_led dreamplug_led_pins[] = { + { + .name = "dreamplug:blue:bluetooth", + .gpio = 47, + .active_low = 1, + }, + { + .name = "dreamplug:green:wifi", + .gpio = 48, + .active_low = 1, + }, + { + .name = "dreamplug:green:wifi_ap", + .gpio = 49, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data dreamplug_led_data = { + .leds = dreamplug_led_pins, + .num_leds = ARRAY_SIZE(dreamplug_led_pins), +}; + +static struct platform_device dreamplug_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &dreamplug_led_data, + } +}; + +static unsigned int dreamplug_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP47_GPIO, /* Bluetooth LED */ + MPP48_GPIO, /* Wifi LED */ + MPP49_GPIO, /* Wifi AP LED */ + 0 +}; + +void __init dreamplug_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(dreamplug_mpp_config); + + spi_register_board_info(dreamplug_spi_slave_info, + ARRAY_SIZE(dreamplug_spi_slave_info)); + kirkwood_spi_init(); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&dreamplug_ge00_data); + kirkwood_ge01_init(&dreamplug_ge01_data); + kirkwood_sata_init(&dreamplug_sata_data); + kirkwood_sdio_init(&dreamplug_mvsdio_data); + + platform_device_register(&dreamplug_leds); +} diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index fbe6405602ed..1c672d9e6656 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -3,7 +3,7 @@ * * arch/arm/mach-kirkwood/board-dt.c * - * Marvell DreamPlug Reference Board Setup + * Flattened Device Tree board initialization * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -12,150 +12,45 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/partitions.h> -#include <linux/ata_platform.h> -#include <linux/mv643xx_eth.h> #include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_fdt.h> -#include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/gpio.h> -#include <linux/leds.h> -#include <linux/mtd/physmap.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> -#include <linux/spi/orion_spi.h> -#include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/kirkwood.h> -#include <plat/mvsdio.h> +#include <asm/mach/map.h> +#include <mach/bridge-regs.h> #include "common.h" -#include "mpp.h" static struct of_device_id kirkwood_dt_match_table[] __initdata = { { .compatible = "simple-bus", }, { } }; -struct mtd_partition dreamplug_partitions[] = { - { - .name = "u-boot", - .size = SZ_512K, - .offset = 0, - }, - { - .name = "u-boot env", - .size = SZ_64K, - .offset = SZ_512K + SZ_512K, - }, - { - .name = "dtb", - .size = SZ_64K, - .offset = SZ_512K + SZ_512K + SZ_512K, - }, -}; - -static const struct flash_platform_data dreamplug_spi_slave_data = { - .type = "mx25l1606e", - .name = "spi_flash", - .parts = dreamplug_partitions, - .nr_parts = ARRAY_SIZE(dreamplug_partitions), -}; - -static struct spi_board_info __initdata dreamplug_spi_slave_info[] = { - { - .modalias = "m25p80", - .platform_data = &dreamplug_spi_slave_data, - .irq = -1, - .max_speed_hz = 50000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -static struct mv643xx_eth_platform_data dreamplug_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -static struct mv643xx_eth_platform_data dreamplug_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(1), -}; - -static struct mv_sata_platform_data dreamplug_sata_data = { - .n_ports = 1, -}; - -static struct mvsdio_platform_data dreamplug_mvsdio_data = { - /* unfortunately the CD signal has not been connected */ -}; - -static struct gpio_led dreamplug_led_pins[] = { - { - .name = "dreamplug:blue:bluetooth", - .gpio = 47, - .active_low = 1, - }, - { - .name = "dreamplug:green:wifi", - .gpio = 48, - .active_low = 1, - }, - { - .name = "dreamplug:green:wifi_ap", - .gpio = 49, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data dreamplug_led_data = { - .leds = dreamplug_led_pins, - .num_leds = ARRAY_SIZE(dreamplug_led_pins), -}; - -static struct platform_device dreamplug_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &dreamplug_led_data, - } -}; - -static unsigned int dreamplug_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP47_GPIO, /* Bluetooth LED */ - MPP48_GPIO, /* Wifi LED */ - MPP49_GPIO, /* Wifi AP LED */ - 0 -}; - -static void __init dreamplug_init(void) +static void __init kirkwood_dt_init(void) { + pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk); + /* - * Basic setup. Needs to be called early. + * Disable propagation of mbus errors to the CPU local bus, + * as this causes mbus errors (which can occur for example + * for PCI aborts) to throw CPU aborts, which we're not set + * up to deal with. */ - kirkwood_mpp_conf(dreamplug_mpp_config); + writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); - spi_register_board_info(dreamplug_spi_slave_info, - ARRAY_SIZE(dreamplug_spi_slave_info)); - kirkwood_spi_init(); + kirkwood_setup_cpu_mbus(); - kirkwood_ehci_init(); - kirkwood_ge00_init(&dreamplug_ge00_data); - kirkwood_ge01_init(&dreamplug_ge01_data); - kirkwood_sata_init(&dreamplug_sata_data); - kirkwood_sdio_init(&dreamplug_mvsdio_data); +#ifdef CONFIG_CACHE_FEROCEON_L2 + kirkwood_l2_init(); +#endif - platform_device_register(&dreamplug_leds); -} + /* internal devices that every board has */ + kirkwood_wdt_init(); + kirkwood_xor0_init(); + kirkwood_xor1_init(); + kirkwood_crypto_init(); -static void __init kirkwood_dt_init(void) -{ - kirkwood_init(); +#ifdef CONFIG_KEXEC + kexec_reinit = kirkwood_enable_pcie; +#endif if (of_machine_is_compatible("globalscale,dreamplug")) dreamplug_init(); diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 77d4852e19f2..a02cae881f2f 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -279,7 +279,7 @@ void __init kirkwood_crypto_init(void) /***************************************************************************** * XOR0 ****************************************************************************/ -static void __init kirkwood_xor0_init(void) +void __init kirkwood_xor0_init(void) { kirkwood_clk_ctrl |= CGC_XOR0; @@ -291,7 +291,7 @@ static void __init kirkwood_xor0_init(void) /***************************************************************************** * XOR1 ****************************************************************************/ -static void __init kirkwood_xor1_init(void) +void __init kirkwood_xor1_init(void) { kirkwood_clk_ctrl |= CGC_XOR1; @@ -303,7 +303,7 @@ static void __init kirkwood_xor1_init(void) /***************************************************************************** * Watchdog ****************************************************************************/ -static void __init kirkwood_wdt_init(void) +void __init kirkwood_wdt_init(void) { orion_wdt_init(kirkwood_tclk); } @@ -392,7 +392,7 @@ void __init kirkwood_audio_init(void) /* * Identify device ID and revision. */ -static char * __init kirkwood_id(void) +char * __init kirkwood_id(void) { u32 dev, rev; @@ -435,7 +435,7 @@ static char * __init kirkwood_id(void) } } -static void __init kirkwood_l2_init(void) +void __init kirkwood_l2_init(void) { #ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG); @@ -450,7 +450,6 @@ void __init kirkwood_init(void) { printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk); - kirkwood_i2s_data.tclk = kirkwood_tclk; /* * Disable propagation of mbus errors to the CPU local bus, diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 9071a397136d..fa8e7689c436 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -51,6 +51,21 @@ void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev void kirkwood_audio_init(void); void kirkwood_restart(char, const char *); +/* board init functions for boards not fully converted to fdt */ +#ifdef CONFIG_MACH_DREAMPLUG_DT +void dreamplug_init(void); +#else +static inline void dreamplug_init(void) {}; +#endif + +/* early init functions not converted to fdt yet */ +char *kirkwood_id(void); +void kirkwood_l2_init(void); +void kirkwood_wdt_init(void); +void kirkwood_xor0_init(void); +void kirkwood_xor1_init(void); +void kirkwood_crypto_init(void); + extern int kirkwood_tclk; extern struct sys_timer kirkwood_timer; diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c index 7088180b018b..0f1710941878 100644 --- a/arch/arm/mach-kirkwood/cpuidle.c +++ b/arch/arm/mach-kirkwood/cpuidle.c @@ -20,77 +20,47 @@ #include <linux/io.h> #include <linux/export.h> #include <asm/proc-fns.h> +#include <asm/cpuidle.h> #include <mach/kirkwood.h> #define KIRKWOOD_MAX_STATES 2 -static struct cpuidle_driver kirkwood_idle_driver = { - .name = "kirkwood_idle", - .owner = THIS_MODULE, -}; - -static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device); - /* Actual code that puts the SoC in different idle states */ static int kirkwood_enter_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - struct timeval before, after; - int idle_time; - - local_irq_disable(); - do_gettimeofday(&before); - if (index == 0) - /* Wait for interrupt state */ - cpu_do_idle(); - else if (index == 1) { - /* - * Following write will put DDR in self refresh. - * Note that we have 256 cycles before DDR puts it - * self in self-refresh, so the wait-for-interrupt - * call afterwards won't get the DDR from self refresh - * mode. - */ - writel(0x7, DDR_OPERATION_BASE); - cpu_do_idle(); - } - do_gettimeofday(&after); - local_irq_enable(); - idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + - (after.tv_usec - before.tv_usec); - - /* Update last residency */ - dev->last_residency = idle_time; + writel(0x7, DDR_OPERATION_BASE); + cpu_do_idle(); return index; } +static struct cpuidle_driver kirkwood_idle_driver = { + .name = "kirkwood_idle", + .owner = THIS_MODULE, + .en_core_tk_irqen = 1, + .states[0] = ARM_CPUIDLE_WFI_STATE, + .states[1] = { + .enter = kirkwood_enter_idle, + .exit_latency = 10, + .target_residency = 100000, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "DDR SR", + .desc = "WFI and DDR Self Refresh", + }, + .state_count = KIRKWOOD_MAX_STATES, +}; + +static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device); + /* Initialize CPU idle by registering the idle states */ static int kirkwood_init_cpuidle(void) { struct cpuidle_device *device; - struct cpuidle_driver *driver = &kirkwood_idle_driver; device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id()); device->state_count = KIRKWOOD_MAX_STATES; - driver->state_count = KIRKWOOD_MAX_STATES; - - /* Wait for interrupt state */ - driver->states[0].enter = kirkwood_enter_idle; - driver->states[0].exit_latency = 1; - driver->states[0].target_residency = 10000; - driver->states[0].flags = CPUIDLE_FLAG_TIME_VALID; - strcpy(driver->states[0].name, "WFI"); - strcpy(driver->states[0].desc, "Wait for interrupt"); - - /* Wait for interrupt and DDR self refresh state */ - driver->states[1].enter = kirkwood_enter_idle; - driver->states[1].exit_latency = 10; - driver->states[1].target_residency = 10000; - driver->states[1].flags = CPUIDLE_FLAG_TIME_VALID; - strcpy(driver->states[1].name, "DDR SR"); - strcpy(driver->states[1].desc, "WFI and DDR Self Refresh"); cpuidle_register_driver(&kirkwood_idle_driver); if (cpuidle_register_device(device)) { diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h index 49dd0cb5e166..5d0ab61700d2 100644 --- a/arch/arm/mach-kirkwood/include/mach/io.h +++ b/arch/arm/mach-kirkwood/include/mach/io.h @@ -20,7 +20,5 @@ static inline void __iomem *__io(unsigned long addr) } #define __io(a) __io(a) -#define __mem_pci(a) (a) - #endif |