diff options
Diffstat (limited to 'arch/arm/mach-kirkwood/common.c')
| -rw-r--r-- | arch/arm/mach-kirkwood/common.c | 167 |
1 files changed, 165 insertions, 2 deletions
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index eeb00240d784..0f6919838011 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -16,6 +16,7 @@ #include <linux/mv643xx_eth.h> #include <linux/mv643xx_i2c.h> #include <linux/ata_platform.h> +#include <linux/mtd/nand.h> #include <linux/spi/orion_spi.h> #include <net/dsa.h> #include <asm/page.h> @@ -29,6 +30,7 @@ #include <plat/mvsdio.h> #include <plat/mv_xor.h> #include <plat/orion_nand.h> +#include <plat/orion_wdt.h> #include <plat/time.h> #include "common.h" @@ -54,6 +56,13 @@ void __init kirkwood_map_io(void) iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc)); } +/* + * Default clock control bits. Any bit _not_ set in this variable + * will be cleared from the hardware after platform devices have been + * registered. Some reserved bits must be set to 1. + */ +unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED; + /***************************************************************************** * EHCI @@ -95,6 +104,7 @@ static struct platform_device kirkwood_ehci = { void __init kirkwood_ehci_init(void) { + kirkwood_clk_ctrl |= CGC_USB0; platform_device_register(&kirkwood_ehci); } @@ -144,10 +154,14 @@ static struct platform_device kirkwood_ge00 = { .id = 0, .num_resources = 1, .resource = kirkwood_ge00_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) { + kirkwood_clk_ctrl |= CGC_GE0; eth_data->shared = &kirkwood_ge00_shared; kirkwood_ge00.dev.platform_data = eth_data; @@ -202,10 +216,14 @@ static struct platform_device kirkwood_ge01 = { .id = 1, .num_resources = 1, .resource = kirkwood_ge01_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) { + kirkwood_clk_ctrl |= CGC_GE1; eth_data->shared = &kirkwood_ge01_shared; kirkwood_ge01.dev.platform_data = eth_data; @@ -252,6 +270,43 @@ void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq) /***************************************************************************** + * NAND flash + ****************************************************************************/ +static struct resource kirkwood_nand_resource = { + .flags = IORESOURCE_MEM, + .start = KIRKWOOD_NAND_MEM_PHYS_BASE, + .end = KIRKWOOD_NAND_MEM_PHYS_BASE + + KIRKWOOD_NAND_MEM_SIZE - 1, +}; + +static struct orion_nand_data kirkwood_nand_data = { + .cle = 0, + .ale = 1, + .width = 8, +}; + +static struct platform_device kirkwood_nand_flash = { + .name = "orion_nand", + .id = -1, + .dev = { + .platform_data = &kirkwood_nand_data, + }, + .resource = &kirkwood_nand_resource, + .num_resources = 1, +}; + +void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, + int chip_delay) +{ + kirkwood_clk_ctrl |= CGC_RUNIT; + kirkwood_nand_data.parts = parts; + kirkwood_nand_data.nr_parts = nr_parts; + kirkwood_nand_data.chip_delay = chip_delay; + platform_device_register(&kirkwood_nand_flash); +} + + +/***************************************************************************** * SoC RTC ****************************************************************************/ static struct resource kirkwood_rtc_resource = { @@ -295,6 +350,9 @@ static struct platform_device kirkwood_sata = { void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data) { + kirkwood_clk_ctrl |= CGC_SATA0; + if (sata_data->n_ports > 1) + kirkwood_clk_ctrl |= CGC_SATA1; sata_data->dram = &kirkwood_mbus_dram_info; kirkwood_sata.dev.platform_data = sata_data; platform_device_register(&kirkwood_sata); @@ -340,6 +398,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data) else mvsdio_data->clock = 200000000; mvsdio_data->dram = &kirkwood_mbus_dram_info; + kirkwood_clk_ctrl |= CGC_SDIO; kirkwood_sdio.dev.platform_data = mvsdio_data; platform_device_register(&kirkwood_sdio); } @@ -371,6 +430,7 @@ static struct platform_device kirkwood_spi = { void __init kirkwood_spi_init() { + kirkwood_clk_ctrl |= CGC_RUNIT; platform_device_register(&kirkwood_spi); } @@ -386,12 +446,10 @@ static struct mv64xxx_i2c_pdata kirkwood_i2c_pdata = { static struct resource kirkwood_i2c_resources[] = { { - .name = "i2c", .start = I2C_PHYS_BASE, .end = I2C_PHYS_BASE + 0x1f, .flags = IORESOURCE_MEM, }, { - .name = "i2c", .start = IRQ_KIRKWOOD_TWSI, .end = IRQ_KIRKWOOD_TWSI, .flags = IORESOURCE_IRQ, @@ -503,6 +561,43 @@ void __init kirkwood_uart1_init(void) /***************************************************************************** + * Cryptographic Engines and Security Accelerator (CESA) + ****************************************************************************/ + +static struct resource kirkwood_crypto_res[] = { + { + .name = "regs", + .start = CRYPTO_PHYS_BASE, + .end = CRYPTO_PHYS_BASE + 0xffff, + .flags = IORESOURCE_MEM, + }, { + .name = "sram", + .start = KIRKWOOD_SRAM_PHYS_BASE, + .end = KIRKWOOD_SRAM_PHYS_BASE + KIRKWOOD_SRAM_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .name = "crypto interrupt", + .start = IRQ_KIRKWOOD_CRYPTO, + .end = IRQ_KIRKWOOD_CRYPTO, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device kirkwood_crypto_device = { + .name = "mv_crypto", + .id = -1, + .num_resources = ARRAY_SIZE(kirkwood_crypto_res), + .resource = kirkwood_crypto_res, +}; + +void __init kirkwood_crypto_init(void) +{ + kirkwood_clk_ctrl |= CGC_CRYPTO; + platform_device_register(&kirkwood_crypto_device); +} + + +/***************************************************************************** * XOR ****************************************************************************/ static struct mv_xor_platform_shared_data kirkwood_xor_shared_data = { @@ -593,6 +688,7 @@ static struct platform_device kirkwood_xor01_channel = { static void __init kirkwood_xor0_init(void) { + kirkwood_clk_ctrl |= CGC_XOR0; platform_device_register(&kirkwood_xor0_shared); /* @@ -691,6 +787,7 @@ static struct platform_device kirkwood_xor11_channel = { static void __init kirkwood_xor1_init(void) { + kirkwood_clk_ctrl |= CGC_XOR1; platform_device_register(&kirkwood_xor1_shared); /* @@ -709,6 +806,29 @@ static void __init kirkwood_xor1_init(void) /***************************************************************************** + * Watchdog + ****************************************************************************/ +static struct orion_wdt_platform_data kirkwood_wdt_data = { + .tclk = 0, +}; + +static struct platform_device kirkwood_wdt_device = { + .name = "orion_wdt", + .id = -1, + .dev = { + .platform_data = &kirkwood_wdt_data, + }, + .num_resources = 0, +}; + +static void __init kirkwood_wdt_init(void) +{ + kirkwood_wdt_data.tclk = kirkwood_tclk; + platform_device_register(&kirkwood_wdt_device); +} + + +/***************************************************************************** * Time handling ****************************************************************************/ int kirkwood_tclk; @@ -800,6 +920,49 @@ void __init kirkwood_init(void) /* internal devices that every board has */ kirkwood_rtc_init(); + kirkwood_wdt_init(); kirkwood_xor0_init(); kirkwood_xor1_init(); + kirkwood_crypto_init(); +} + +static int __init kirkwood_clock_gate(void) +{ + unsigned int curr = readl(CLOCK_GATING_CTRL); + + printk(KERN_DEBUG "Gating clock of unused units\n"); + printk(KERN_DEBUG "before: 0x%08x\n", curr); + + /* Make sure those units are accessible */ + writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0, CLOCK_GATING_CTRL); + + /* For SATA: first shutdown the phy */ + if (!(kirkwood_clk_ctrl & CGC_SATA0)) { + /* Disable PLL and IVREF */ + writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2); + /* Disable PHY */ + writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL); + } + if (!(kirkwood_clk_ctrl & CGC_SATA1)) { + /* Disable PLL and IVREF */ + writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2); + /* Disable PHY */ + writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL); + } + + /* For PCIe: first shutdown the phy */ + if (!(kirkwood_clk_ctrl & CGC_PEX0)) { + writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL); + while (1) + if (readl(PCIE_STATUS) & 0x1) + break; + writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL); + } + + /* Now gate clock the required units */ + writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL); + printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL)); + + return 0; } +late_initcall(kirkwood_clock_gate); |