diff options
Diffstat (limited to 'arch/arm/mach-integrator')
| -rw-r--r-- | arch/arm/mach-integrator/Makefile | 3 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/core.c | 7 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/cpu.c | 8 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/include/mach/cm.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/include/mach/io.h | 33 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/include/mach/platform.h | 4 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/integrator_ap.c | 21 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/integrator_cp.c | 6 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/leds.c | 161 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/pci_v3.c | 62 |
10 files changed, 152 insertions, 155 deletions
diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile index ebeef966e1f5..5521d18bf19a 100644 --- a/arch/arm/mach-integrator/Makefile +++ b/arch/arm/mach-integrator/Makefile @@ -4,11 +4,10 @@ # Object file lists. -obj-y := core.o lm.o +obj-y := core.o lm.o leds.o obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o -obj-$(CONFIG_LEDS) += leds.o obj-$(CONFIG_PCI) += pci_v3.o pci.o obj-$(CONFIG_CPU_FREQ_INTEGRATOR) += cpu.o obj-$(CONFIG_INTEGRATOR_IMPD1) += impd1.o diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 1772c024e789..ea22a17246d7 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -28,7 +28,6 @@ #include <mach/cm.h> #include <mach/irqs.h> -#include <asm/leds.h> #include <asm/mach-types.h> #include <asm/mach/time.h> #include <asm/pgtable.h> @@ -97,8 +96,8 @@ int __init integrator_init(bool is_cp) * UART0 7 6 * UART1 5 4 */ -#define SC_CTRLC IO_ADDRESS(INTEGRATOR_SC_CTRLC) -#define SC_CTRLS IO_ADDRESS(INTEGRATOR_SC_CTRLS) +#define SC_CTRLC __io_address(INTEGRATOR_SC_CTRLC) +#define SC_CTRLS __io_address(INTEGRATOR_SC_CTRLS) static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl) { @@ -133,8 +132,6 @@ struct amba_pl010_data integrator_uart_data = { .set_mctrl = integrator_uart_set_mctrl, }; -#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL) - static DEFINE_RAW_SPINLOCK(cm_lock); /** diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c index fbb457779895..590c192cdf4d 100644 --- a/arch/arm/mach-integrator/cpu.c +++ b/arch/arm/mach-integrator/cpu.c @@ -25,10 +25,10 @@ static struct cpufreq_driver integrator_driver; -#define CM_ID IO_ADDRESS(INTEGRATOR_HDR_ID) -#define CM_OSC IO_ADDRESS(INTEGRATOR_HDR_OSC) -#define CM_STAT IO_ADDRESS(INTEGRATOR_HDR_STAT) -#define CM_LOCK IO_ADDRESS(INTEGRATOR_HDR_LOCK) +#define CM_ID __io_address(INTEGRATOR_HDR_ID) +#define CM_OSC __io_address(INTEGRATOR_HDR_OSC) +#define CM_STAT __io_address(INTEGRATOR_HDR_STAT) +#define CM_LOCK __io_address(INTEGRATOR_HDR_LOCK) static const struct icst_params lclk_params = { .ref = 24000000, diff --git a/arch/arm/mach-integrator/include/mach/cm.h b/arch/arm/mach-integrator/include/mach/cm.h index 445d57adb043..1a78692e32a4 100644 --- a/arch/arm/mach-integrator/include/mach/cm.h +++ b/arch/arm/mach-integrator/include/mach/cm.h @@ -3,6 +3,8 @@ */ void cm_control(u32, u32); +#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL) + #define CM_CTRL_LED (1 << 0) #define CM_CTRL_nMBDET (1 << 1) #define CM_CTRL_REMAP (1 << 2) diff --git a/arch/arm/mach-integrator/include/mach/io.h b/arch/arm/mach-integrator/include/mach/io.h deleted file mode 100644 index 8de70de3dd0a..000000000000 --- a/arch/arm/mach-integrator/include/mach/io.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-integrator/include/mach/io.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -/* - * WARNING: this has to mirror definitions in platform.h - */ -#define PCI_MEMORY_VADDR 0xe8000000 -#define PCI_CONFIG_VADDR 0xec000000 -#define PCI_V3_VADDR 0xed000000 -#define PCI_IO_VADDR 0xee000000 - -#define __io(a) ((void __iomem *)(PCI_IO_VADDR + (a))) - -#endif diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h index ec467baade09..4c0347526851 100644 --- a/arch/arm/mach-integrator/include/mach/platform.h +++ b/arch/arm/mach-integrator/include/mach/platform.h @@ -324,6 +324,10 @@ */ #define PHYS_PCI_V3_BASE 0x62000000 +#define PCI_MEMORY_VADDR 0xe8000000 +#define PCI_CONFIG_VADDR 0xec000000 +#define PCI_V3_VADDR 0xed000000 + /* ------------------------------------------------------------------------ * Integrator Interrupt Controllers * ------------------------------------------------------------------------ diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index ff1255ae7121..d5b5435a09ae 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -53,6 +53,7 @@ #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/map.h> +#include <asm/mach/pci.h> #include <asm/mach/time.h> #include <plat/fpga-irq.h> @@ -76,7 +77,7 @@ * e8000000 40000000 PCI memory PHYS_PCI_MEM_BASE (max 512M) * ec000000 61000000 PCI config space PHYS_PCI_CONFIG_BASE (max 16M) * ed000000 62000000 PCI V3 regs PHYS_PCI_V3_BASE (max 64k) - * ee000000 60000000 PCI IO PHYS_PCI_IO_BASE (max 16M) + * fee00000 60000000 PCI IO PHYS_PCI_IO_BASE (max 16M) * ef000000 Cache flush * f1000000 10000000 Core module registers * f1100000 11000000 System controller registers @@ -136,25 +137,20 @@ static struct map_desc ap_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = PCI_MEMORY_VADDR, + .virtual = (unsigned long)PCI_MEMORY_VADDR, .pfn = __phys_to_pfn(PHYS_PCI_MEM_BASE), .length = SZ_16M, .type = MT_DEVICE }, { - .virtual = PCI_CONFIG_VADDR, + .virtual = (unsigned long)PCI_CONFIG_VADDR, .pfn = __phys_to_pfn(PHYS_PCI_CONFIG_BASE), .length = SZ_16M, .type = MT_DEVICE }, { - .virtual = PCI_V3_VADDR, + .virtual = (unsigned long)PCI_V3_VADDR, .pfn = __phys_to_pfn(PHYS_PCI_V3_BASE), .length = SZ_64K, .type = MT_DEVICE - }, { - .virtual = PCI_IO_VADDR, - .pfn = __phys_to_pfn(PHYS_PCI_IO_BASE), - .length = SZ_64K, - .type = MT_DEVICE } }; @@ -162,6 +158,7 @@ static void __init ap_map_io(void) { iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc)); vga_base = PCI_MEMORY_VADDR; + pci_map_io_early(__phys_to_pfn(PHYS_PCI_IO_BASE)); } #ifdef CONFIG_PM @@ -259,9 +256,9 @@ static struct physmap_flash_data ap_flash_data = { /* * Where is the timer (VA)? */ -#define TIMER0_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER0_BASE) -#define TIMER1_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER1_BASE) -#define TIMER2_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER2_BASE) +#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE) +#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE) +#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE) static unsigned long timer_reload; diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index f51363e2d6fe..6870a1fbcd78 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -55,7 +55,7 @@ #define INTCP_PA_CLCD_BASE 0xc0000000 -#define INTCP_VA_CTRL_BASE IO_ADDRESS(INTEGRATOR_CP_CTL_BASE) +#define INTCP_VA_CTRL_BASE __io_address(INTEGRATOR_CP_CTL_BASE) #define INTCP_FLASHPROG 0x04 #define CINTEGRATOR_FLASHPROG_FLVPPEN (1 << 0) #define CINTEGRATOR_FLASHPROG_FLWREN (1 << 1) @@ -189,8 +189,8 @@ static struct physmap_flash_data intcp_flash_data = { */ static unsigned int mmc_status(struct device *dev) { - unsigned int status = readl(IO_ADDRESS(0xca000000 + 4)); - writel(8, IO_ADDRESS(INTEGRATOR_CP_CTL_BASE + 8)); + unsigned int status = readl(__io_address(0xca000000 + 4)); + writel(8, __io_address(INTEGRATOR_CP_CTL_BASE + 8)); return status & 8; } diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c index 466defa97842..7a7f6d3273bf 100644 --- a/arch/arm/mach-integrator/leds.c +++ b/arch/arm/mach-integrator/leds.c @@ -1,90 +1,125 @@ /* - * linux/arch/arm/mach-integrator/leds.c + * Driver for the 4 user LEDs found on the Integrator AP/CP baseboard + * Based on Versatile and RealView machine LED code * - * Integrator/AP and Integrator/CP LED control routines - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * License terms: GNU General Public License (GPL) version 2 + * Author: Bryan Wu <bryan.wu@canonical.com> */ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/smp.h> -#include <linux/spinlock.h> #include <linux/io.h> +#include <linux/slab.h> +#include <linux/leds.h> +#include <mach/cm.h> #include <mach/hardware.h> #include <mach/platform.h> -#include <asm/leds.h> -#include <asm/mach-types.h> -#include <mach/cm.h> -static int saved_leds; +#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS) + +#define ALPHA_REG __io_address(INTEGRATOR_DBG_BASE) +#define LEDREG (__io_address(INTEGRATOR_DBG_BASE) + INTEGRATOR_DBG_LEDS_OFFSET) -static void integrator_leds_event(led_event_t ledevt) +struct integrator_led { + struct led_classdev cdev; + u8 mask; +}; + +/* + * The triggers lines up below will only be used if the + * LED triggers are compiled in. + */ +static const struct { + const char *name; + const char *trigger; +} integrator_leds[] = { + { "integrator:green0", "heartbeat", }, + { "integrator:yellow", }, + { "integrator:red", }, + { "integrator:green1", }, + { "integrator:core_module", "cpu0", }, +}; + +static void integrator_led_set(struct led_classdev *cdev, + enum led_brightness b) { - unsigned long flags; - const unsigned int dbg_base = IO_ADDRESS(INTEGRATOR_DBG_BASE); - unsigned int update_alpha_leds; + struct integrator_led *led = container_of(cdev, + struct integrator_led, cdev); + u32 reg = __raw_readl(LEDREG); - // yup, change the LEDs - local_irq_save(flags); - update_alpha_leds = 0; + if (b != LED_OFF) + reg |= led->mask; + else + reg &= ~led->mask; - switch(ledevt) { - case led_idle_start: - cm_control(CM_CTRL_LED, 0); - break; + while (__raw_readl(ALPHA_REG) & 1) + cpu_relax(); - case led_idle_end: - cm_control(CM_CTRL_LED, CM_CTRL_LED); - break; + __raw_writel(reg, LEDREG); +} - case led_timer: - saved_leds ^= GREEN_LED; - update_alpha_leds = 1; - break; +static enum led_brightness integrator_led_get(struct led_classdev *cdev) +{ + struct integrator_led *led = container_of(cdev, + struct integrator_led, cdev); + u32 reg = __raw_readl(LEDREG); - case led_red_on: - saved_leds |= RED_LED; - update_alpha_leds = 1; - break; + return (reg & led->mask) ? LED_FULL : LED_OFF; +} - case led_red_off: - saved_leds &= ~RED_LED; - update_alpha_leds = 1; - break; +static void cm_led_set(struct led_classdev *cdev, + enum led_brightness b) +{ + if (b != LED_OFF) + cm_control(CM_CTRL_LED, CM_CTRL_LED); + else + cm_control(CM_CTRL_LED, 0); +} - default: - break; - } +static enum led_brightness cm_led_get(struct led_classdev *cdev) +{ + u32 reg = readl(CM_CTRL); - if (update_alpha_leds) { - while (__raw_readl(dbg_base + INTEGRATOR_DBG_ALPHA_OFFSET) & 1); - __raw_writel(saved_leds, dbg_base + INTEGRATOR_DBG_LEDS_OFFSET); - } - local_irq_restore(flags); + return (reg & CM_CTRL_LED) ? LED_FULL : LED_OFF; } -static int __init leds_init(void) +static int __init integrator_leds_init(void) { - if (machine_is_integrator() || machine_is_cintegrator()) - leds_event = integrator_leds_event; + int i; + + for (i = 0; i < ARRAY_SIZE(integrator_leds); i++) { + struct integrator_led *led; + + led = kzalloc(sizeof(*led), GFP_KERNEL); + if (!led) + break; + + + led->cdev.name = integrator_leds[i].name; + + if (i == 4) { /* Setting for LED in core module */ + led->cdev.brightness_set = cm_led_set; + led->cdev.brightness_get = cm_led_get; + } else { + led->cdev.brightness_set = integrator_led_set; + led->cdev.brightness_get = integrator_led_get; + } + + led->cdev.default_trigger = integrator_leds[i].trigger; + led->mask = BIT(i); + + if (led_classdev_register(NULL, &led->cdev) < 0) { + kfree(led); + break; + } + } return 0; } -core_initcall(leds_init); +/* + * Since we may have triggers on any subsystem, defer registration + * until after subsystem_init. + */ +fs_initcall(integrator_leds_init); +#endif diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index b866880e82ac..bbeca59df66b 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -41,61 +41,61 @@ /* * The V3 PCI interface chip in Integrator provides several windows from * local bus memory into the PCI memory areas. Unfortunately, there - * are not really enough windows for our usage, therefore we reuse + * are not really enough windows for our usage, therefore we reuse * one of the windows for access to PCI configuration space. The * memory map is as follows: - * + * * Local Bus Memory Usage - * + * * 40000000 - 4FFFFFFF PCI memory. 256M non-prefetchable * 50000000 - 5FFFFFFF PCI memory. 256M prefetchable * 60000000 - 60FFFFFF PCI IO. 16M * 61000000 - 61FFFFFF PCI Configuration. 16M - * + * * There are three V3 windows, each described by a pair of V3 registers. * These are LB_BASE0/LB_MAP0, LB_BASE1/LB_MAP1 and LB_BASE2/LB_MAP2. * Base0 and Base1 can be used for any type of PCI memory access. Base2 * can be used either for PCI I/O or for I20 accesses. By default, uHAL * uses this only for PCI IO space. - * + * * Normally these spaces are mapped using the following base registers: - * + * * Usage Local Bus Memory Base/Map registers used - * + * * Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0 * Mem 50000000 - 5FFFFFFF LB_BASE1/LB_MAP1 * IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2 * Cfg 61000000 - 61FFFFFF - * + * * This means that I20 and PCI configuration space accesses will fail. - * When PCI configuration accesses are needed (via the uHAL PCI + * When PCI configuration accesses are needed (via the uHAL PCI * configuration space primitives) we must remap the spaces as follows: - * + * * Usage Local Bus Memory Base/Map registers used - * + * * Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0 * Mem 50000000 - 5FFFFFFF LB_BASE0/LB_MAP0 * IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2 * Cfg 61000000 - 61FFFFFF LB_BASE1/LB_MAP1 - * + * * To make this work, the code depends on overlapping windows working. - * The V3 chip translates an address by checking its range within + * The V3 chip translates an address by checking its range within * each of the BASE/MAP pairs in turn (in ascending register number * order). It will use the first matching pair. So, for example, * if the same address is mapped by both LB_BASE0/LB_MAP0 and - * LB_BASE1/LB_MAP1, the V3 will use the translation from + * LB_BASE1/LB_MAP1, the V3 will use the translation from * LB_BASE0/LB_MAP0. - * + * * To allow PCI Configuration space access, the code enlarges the * window mapped by LB_BASE0/LB_MAP0 from 256M to 512M. This occludes * the windows currently mapped by LB_BASE1/LB_MAP1 so that it can * be remapped for use by configuration cycles. - * - * At the end of the PCI Configuration space accesses, + * + * At the end of the PCI Configuration space accesses, * LB_BASE1/LB_MAP1 is reset to map PCI Memory. Finally the window * mapped by LB_BASE0/LB_MAP0 is reduced in size from 512M to 256M to * reveal the now restored LB_BASE1/LB_MAP1 window. - * + * * NOTE: We do not set up I2O mapping. I suspect that this is only * for an intelligent (target) device. Using I2O disables most of * the mappings into PCI memory. @@ -127,8 +127,8 @@ * * returns: configuration address to play on the PCI bus * - * To generate the appropriate PCI configuration cycles in the PCI - * configuration address space, you present the V3 with the following pattern + * To generate the appropriate PCI configuration cycles in the PCI + * configuration address space, you present the V3 with the following pattern * (which is very nearly a type 1 (except that the lower two bits are 00 and * not 01). In order for this mapping to work you need to set up one of * the local to PCI aperatures to 16Mbytes in length translating to @@ -138,7 +138,7 @@ * * Type 0: * - * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 + * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ * | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0| @@ -150,7 +150,7 @@ * * Type 1: * - * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 + * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1| @@ -161,7 +161,7 @@ * 15:11 Device number (5 bits) * 10:8 function number * 7:2 register number - * + * */ static DEFINE_RAW_SPINLOCK(v3_lock); @@ -181,7 +181,7 @@ static DEFINE_RAW_SPINLOCK(v3_lock); #undef V3_LB_BASE_PREFETCH #define V3_LB_BASE_PREFETCH 0 -static unsigned long v3_open_config_window(struct pci_bus *bus, +static void __iomem *v3_open_config_window(struct pci_bus *bus, unsigned int devfn, int offset) { unsigned int address, mapaddress, busnr; @@ -280,7 +280,7 @@ static void v3_close_config_window(void) static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val) { - unsigned long addr; + void __iomem *addr; unsigned long flags; u32 v; @@ -311,7 +311,7 @@ static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where, static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) { - unsigned long addr; + void __iomem *addr; unsigned long flags; raw_spin_lock_irqsave(&v3_lock, flags); @@ -374,12 +374,9 @@ static int __init pci_v3_setup_resources(struct pci_sys_data *sys) } /* - * the IO resource for this bus * the mem resource for this bus * the prefetch mem resource for this bus */ - pci_add_resource_offset(&sys->resources, - &ioport_resource, sys->io_offset); pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset); pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset); @@ -391,9 +388,9 @@ static int __init pci_v3_setup_resources(struct pci_sys_data *sys) * means I can't get additional information on the reason for the pm2fb * problems. I suppose I'll just have to mind-meld with the machine. ;) */ -#define SC_PCI IO_ADDRESS(INTEGRATOR_SC_PCIENABLE) -#define SC_LBFADDR IO_ADDRESS(INTEGRATOR_SC_BASE + 0x20) -#define SC_LBFCODE IO_ADDRESS(INTEGRATOR_SC_BASE + 0x24) +#define SC_PCI __io_address(INTEGRATOR_SC_PCIENABLE) +#define SC_LBFADDR __io_address(INTEGRATOR_SC_BASE + 0x20) +#define SC_LBFCODE __io_address(INTEGRATOR_SC_BASE + 0x24) static int v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) @@ -498,7 +495,6 @@ void __init pci_v3_preinit(void) unsigned int temp; int ret; - pcibios_min_io = 0x6000; pcibios_min_mem = 0x00100000; /* |