diff options
Diffstat (limited to 'arch/arm/mach-davinci')
36 files changed, 605 insertions, 675 deletions
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index ab99c3c3b752..f8eecb959413 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -4,12 +4,12 @@ config AINTC bool config CP_INTC - select IRQ_DOMAIN bool + select IRQ_DOMAIN config ARCH_DAVINCI_DMx - select CPU_ARM926T bool + select CPU_ARM926T menu "TI DaVinci Implementations" @@ -32,19 +32,19 @@ config ARCH_DAVINCI_DM646x config ARCH_DAVINCI_DA830 bool "DA830/OMAP-L137/AM17x based system" - select CP_INTC select ARCH_DAVINCI_DA8XX select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1 + select CP_INTC config ARCH_DAVINCI_DA850 bool "DA850/OMAP-L138/AM18x based system" - select CP_INTC select ARCH_DAVINCI_DA8XX select ARCH_HAS_CPUFREQ + select CP_INTC config ARCH_DAVINCI_DA8XX - select CPU_ARM926T bool + select CPU_ARM926T config ARCH_DAVINCI_DM365 bool "DaVinci 365 based system" @@ -52,9 +52,9 @@ config ARCH_DAVINCI_DM365 select ARCH_DAVINCI_DMx config ARCH_DAVINCI_TNETV107X + bool "TNETV107X based system" select CPU_V6 select CP_INTC - bool "TNETV107X based system" comment "DaVinci Board Type" @@ -103,9 +103,9 @@ config MACH_DAVINCI_DM6467_EVM bool "TI DM6467 EVM" default ARCH_DAVINCI_DM646x depends on ARCH_DAVINCI_DM646x - select MACH_DAVINCI_DM6467TEVM select EEPROM_AT24 select I2C + select MACH_DAVINCI_DM6467TEVM help Configure this option to specify the whether the board used for development is a DM6467 EVM @@ -127,8 +127,8 @@ config MACH_DAVINCI_DA830_EVM bool "TI DA830/OMAP-L137/AM17x Reference Platform" default ARCH_DAVINCI_DA830 depends on ARCH_DAVINCI_DA830 - select GPIO_PCF857X select EEPROM_AT24 + select GPIO_PCF857X select I2C help Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. @@ -186,6 +186,13 @@ config DA850_UI_RMII NOTE: Please take care while choosing this option, MII PHY will not be functional if RMII mode is selected. +config DA850_UI_SD_VIDEO_PORT + bool "Video Port Interface" + help + Say Y if you want to use Video Port Interface (VPIF) on the + DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the + UI daughter card that is supplied with the EVM. + endchoice config DA850_WL12XX diff --git a/arch/arm/mach-davinci/aemif.c b/arch/arm/mach-davinci/aemif.c index 1ce70a91f2e9..f091a9010c2f 100644 --- a/arch/arm/mach-davinci/aemif.c +++ b/arch/arm/mach-davinci/aemif.c @@ -15,7 +15,7 @@ #include <linux/module.h> #include <linux/time.h> -#include <mach/aemif.h> +#include <linux/platform_data/mtd-davinci-aemif.h> /* Timing value configuration */ diff --git a/arch/arm/mach-davinci/asp.h b/arch/arm/mach-davinci/asp.h new file mode 100644 index 000000000000..d9b2acd12393 --- /dev/null +++ b/arch/arm/mach-davinci/asp.h @@ -0,0 +1,49 @@ +/* + * TI DaVinci Audio definitions + */ +#ifndef __ASM_ARCH_DAVINCI_ASP_H +#define __ASM_ARCH_DAVINCI_ASP_H + +/* Bases of dm644x and dm355 register banks */ +#define DAVINCI_ASP0_BASE 0x01E02000 +#define DAVINCI_ASP1_BASE 0x01E04000 + +/* Bases of dm365 register banks */ +#define DAVINCI_DM365_ASP0_BASE 0x01D02000 + +/* Bases of dm646x register banks */ +#define DAVINCI_DM646X_MCASP0_REG_BASE 0x01D01000 +#define DAVINCI_DM646X_MCASP1_REG_BASE 0x01D01800 + +/* Bases of da850/da830 McASP0 register banks */ +#define DAVINCI_DA8XX_MCASP0_REG_BASE 0x01D00000 + +/* Bases of da830 McASP1 register banks */ +#define DAVINCI_DA830_MCASP1_REG_BASE 0x01D04000 + +/* EDMA channels of dm644x and dm355 */ +#define DAVINCI_DMA_ASP0_TX 2 +#define DAVINCI_DMA_ASP0_RX 3 +#define DAVINCI_DMA_ASP1_TX 8 +#define DAVINCI_DMA_ASP1_RX 9 + +/* EDMA channels of dm646x */ +#define DAVINCI_DM646X_DMA_MCASP0_AXEVT0 6 +#define DAVINCI_DM646X_DMA_MCASP0_AREVT0 9 +#define DAVINCI_DM646X_DMA_MCASP1_AXEVT1 12 + +/* EDMA channels of da850/da830 McASP0 */ +#define DAVINCI_DA8XX_DMA_MCASP0_AREVT 0 +#define DAVINCI_DA8XX_DMA_MCASP0_AXEVT 1 + +/* EDMA channels of da830 McASP1 */ +#define DAVINCI_DA830_DMA_MCASP1_AREVT 2 +#define DAVINCI_DA830_DMA_MCASP1_AXEVT 3 + +/* Interrupts */ +#define DAVINCI_ASP0_RX_INT IRQ_MBRINT +#define DAVINCI_ASP0_TX_INT IRQ_MBXINT +#define DAVINCI_ASP1_RX_INT IRQ_MBRINT +#define DAVINCI_ASP1_TX_INT IRQ_MBXINT + +#endif /* __ASM_ARCH_DAVINCI_ASP_H */ diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 0031864e7f11..95b5e102ceb1 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -28,11 +28,11 @@ #include <mach/cp_intc.h> #include <mach/mux.h> -#include <mach/nand.h> +#include <linux/platform_data/mtd-davinci.h> #include <mach/da8xx.h> -#include <mach/usb.h> -#include <mach/aemif.h> -#include <mach/spi.h> +#include <linux/platform_data/usb-davinci.h> +#include <linux/platform_data/mtd-davinci-aemif.h> +#include <linux/platform_data/spi-davinci.h> #define DA830_EVM_PHY_ID "" /* diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 0149fb453be3..32ee3f895967 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -40,10 +40,13 @@ #include <mach/cp_intc.h> #include <mach/da8xx.h> -#include <mach/nand.h> +#include <linux/platform_data/mtd-davinci.h> #include <mach/mux.h> -#include <mach/aemif.h> -#include <mach/spi.h> +#include <linux/platform_data/mtd-davinci-aemif.h> +#include <linux/platform_data/spi-davinci.h> + +#include <media/tvp514x.h> +#include <media/adv7343.h> #define DA850_EVM_PHY_ID "davinci_mdio-0:00" #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8) @@ -452,6 +455,15 @@ static void da850_evm_ui_keys_init(unsigned gpio) } } +#ifdef CONFIG_DA850_UI_SD_VIDEO_PORT +static inline void da850_evm_setup_video_port(int video_sel) +{ + gpio_set_value_cansleep(video_sel, 0); +} +#else +static inline void da850_evm_setup_video_port(int video_sel) { } +#endif + static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio, unsigned ngpio, void *c) { @@ -497,6 +509,8 @@ static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio, da850_evm_setup_emac_rmii(sel_a); + da850_evm_setup_video_port(sel_c); + return 0; exp_setup_keys_fail: @@ -1149,6 +1163,169 @@ static __init int da850_evm_init_cpufreq(void) static __init int da850_evm_init_cpufreq(void) { return 0; } #endif +#if defined(CONFIG_DA850_UI_SD_VIDEO_PORT) + +#define TVP5147_CH0 "tvp514x-0" +#define TVP5147_CH1 "tvp514x-1" + +/* VPIF capture configuration */ +static struct tvp514x_platform_data tvp5146_pdata = { + .clk_polarity = 0, + .hs_polarity = 1, + .vs_polarity = 1, +}; + +#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) + +static const struct vpif_input da850_ch0_inputs[] = { + { + .input = { + .index = 0, + .name = "Composite", + .type = V4L2_INPUT_TYPE_CAMERA, + .capabilities = V4L2_IN_CAP_STD, + .std = TVP514X_STD_ALL, + }, + .input_route = INPUT_CVBS_VI2B, + .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC, + .subdev_name = TVP5147_CH0, + }, +}; + +static const struct vpif_input da850_ch1_inputs[] = { + { + .input = { + .index = 0, + .name = "S-Video", + .type = V4L2_INPUT_TYPE_CAMERA, + .capabilities = V4L2_IN_CAP_STD, + .std = TVP514X_STD_ALL, + }, + .input_route = INPUT_SVIDEO_VI2C_VI1C, + .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC, + .subdev_name = TVP5147_CH1, + }, +}; + +static struct vpif_subdev_info da850_vpif_capture_sdev_info[] = { + { + .name = TVP5147_CH0, + .board_info = { + I2C_BOARD_INFO("tvp5146", 0x5d), + .platform_data = &tvp5146_pdata, + }, + }, + { + .name = TVP5147_CH1, + .board_info = { + I2C_BOARD_INFO("tvp5146", 0x5c), + .platform_data = &tvp5146_pdata, + }, + }, +}; + +static struct vpif_capture_config da850_vpif_capture_config = { + .subdev_info = da850_vpif_capture_sdev_info, + .subdev_count = ARRAY_SIZE(da850_vpif_capture_sdev_info), + .chan_config[0] = { + .inputs = da850_ch0_inputs, + .input_count = ARRAY_SIZE(da850_ch0_inputs), + .vpif_if = { + .if_type = VPIF_IF_BT656, + .hd_pol = 1, + .vd_pol = 1, + .fid_pol = 0, + }, + }, + .chan_config[1] = { + .inputs = da850_ch1_inputs, + .input_count = ARRAY_SIZE(da850_ch1_inputs), + .vpif_if = { + .if_type = VPIF_IF_BT656, + .hd_pol = 1, + .vd_pol = 1, + .fid_pol = 0, + }, + }, + .card_name = "DA850/OMAP-L138 Video Capture", +}; + +/* VPIF display configuration */ +static struct vpif_subdev_info da850_vpif_subdev[] = { + { + .name = "adv7343", + .board_info = { + I2C_BOARD_INFO("adv7343", 0x2a), + }, + }, +}; + +static const struct vpif_output da850_ch0_outputs[] = { + { + .output = { + .index = 0, + .name = "Composite", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .capabilities = V4L2_OUT_CAP_STD, + .std = V4L2_STD_ALL, + }, + .subdev_name = "adv7343", + .output_route = ADV7343_COMPOSITE_ID, + }, + { + .output = { + .index = 1, + .name = "S-Video", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .capabilities = V4L2_OUT_CAP_STD, + .std = V4L2_STD_ALL, + }, + .subdev_name = "adv7343", + .output_route = ADV7343_SVIDEO_ID, + }, +}; + +static struct vpif_display_config da850_vpif_display_config = { + .subdevinfo = da850_vpif_subdev, + .subdev_count = ARRAY_SIZE(da850_vpif_subdev), + .chan_config[0] = { + .outputs = da850_ch0_outputs, + .output_count = ARRAY_SIZE(da850_ch0_outputs), + }, + .card_name = "DA850/OMAP-L138 Video Display", +}; + +static __init void da850_vpif_init(void) +{ + int ret; + + ret = da850_register_vpif(); + if (ret) + pr_warn("da850_evm_init: VPIF setup failed: %d\n", ret); + + ret = davinci_cfg_reg_list(da850_vpif_capture_pins); + if (ret) + pr_warn("da850_evm_init: VPIF capture mux setup failed: %d\n", + ret); + + ret = da850_register_vpif_capture(&da850_vpif_capture_config); + if (ret) + pr_warn("da850_evm_init: VPIF capture setup failed: %d\n", ret); + + ret = davinci_cfg_reg_list(da850_vpif_display_pins); + if (ret) + pr_warn("da850_evm_init: VPIF display mux setup failed: %d\n", + ret); + + ret = da850_register_vpif_display(&da850_vpif_display_config); + if (ret) + pr_warn("da850_evm_init: VPIF display setup failed: %d\n", ret); +} + +#else +static __init void da850_vpif_init(void) {} +#endif + #ifdef CONFIG_DA850_WL12XX static void wl12xx_set_power(int index, bool power_on) @@ -1375,6 +1552,8 @@ static __init void da850_evm_init(void) pr_warning("da850_evm_init: suspend registration failed: %d\n", ret); + da850_vpif_init(); + ret = da8xx_register_spi(1, da850evm_spi_info, ARRAY_SIZE(da850evm_spi_info)); if (ret) diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 1c7b1f46a8f3..88ebea89abdf 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -26,11 +26,11 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/i2c.h> +#include <linux/platform_data/i2c-davinci.h> #include <mach/serial.h> -#include <mach/nand.h> -#include <mach/mmc.h> -#include <mach/usb.h> +#include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/mmc-davinci.h> +#include <linux/platform_data/usb-davinci.h> #include "davinci.h" diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 8e7703213b08..2f88103c6459 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -23,11 +23,11 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/i2c.h> +#include <linux/platform_data/i2c-davinci.h> #include <mach/serial.h> -#include <mach/nand.h> -#include <mach/mmc.h> -#include <mach/usb.h> +#include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/mmc-davinci.h> +#include <linux/platform_data/usb-davinci.h> #include "davinci.h" diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 688a9c556dc9..1b4a8adcfdc9 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -33,11 +33,11 @@ #include <mach/mux.h> #include <mach/common.h> -#include <mach/i2c.h> +#include <linux/platform_data/i2c-davinci.h> #include <mach/serial.h> -#include <mach/mmc.h> -#include <mach/nand.h> -#include <mach/keyscan.h> +#include <linux/platform_data/mmc-davinci.h> +#include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/keyscan-davinci.h> #include <media/tvp514x.h> diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index d34ed55912b2..f22572cee49d 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -23,6 +23,7 @@ #include <linux/phy.h> #include <linux/clk.h> #include <linux/videodev2.h> +#include <linux/v4l2-dv-timings.h> #include <linux/export.h> #include <media/tvp514x.h> @@ -31,13 +32,13 @@ #include <asm/mach/arch.h> #include <mach/common.h> -#include <mach/i2c.h> +#include <linux/platform_data/i2c-davinci.h> #include <mach/serial.h> #include <mach/mux.h> -#include <mach/nand.h> -#include <mach/mmc.h> -#include <mach/usb.h> -#include <mach/aemif.h> +#include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/mmc-davinci.h> +#include <linux/platform_data/usb-davinci.h> +#include <linux/platform_data/mtd-davinci-aemif.h> #include "davinci.h" @@ -620,7 +621,7 @@ static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = { { .name = "ntsc", .timings_type = VPBE_ENC_STD, - .timings = {V4L2_STD_525_60}, + .std_id = V4L2_STD_525_60, .interlaced = 1, .xres = 720, .yres = 480, @@ -632,7 +633,7 @@ static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = { { .name = "pal", .timings_type = VPBE_ENC_STD, - .timings = {V4L2_STD_625_50}, + .std_id = V4L2_STD_625_50, .interlaced = 1, .xres = 720, .yres = 576, @@ -647,8 +648,8 @@ static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = { static struct vpbe_enc_mode_info dm644xevm_enc_preset_timing[] = { { .name = "480p59_94", - .timings_type = VPBE_ENC_DV_PRESET, - .timings = {V4L2_DV_480P59_94}, + .timings_type = VPBE_ENC_CUSTOM_TIMINGS, + .dv_timings = V4L2_DV_BT_CEA_720X480P59_94, .interlaced = 0, .xres = 720, .yres = 480, @@ -659,8 +660,8 @@ static struct vpbe_enc_mode_info dm644xevm_enc_preset_timing[] = { }, { .name = "576p50", - .timings_type = VPBE_ENC_DV_PRESET, - .timings = {V4L2_DV_576P50}, + .timings_type = VPBE_ENC_CUSTOM_TIMINGS, + .dv_timings = V4L2_DV_BT_CEA_720X576P50, .interlaced = 0, .xres = 720, .yres = 576, @@ -698,7 +699,7 @@ static struct vpbe_output dm644xevm_vpbe_outputs[] = { .index = 1, .name = "Component", .type = V4L2_OUTPUT_TYPE_ANALOG, - .capabilities = V4L2_OUT_CAP_PRESETS, + .capabilities = V4L2_OUT_CAP_DV_TIMINGS, }, .subdev_name = VPBE_VENC_SUBDEV_NAME, .default_mode = "480p59_94", diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 958679a20e13..1dbf85beed1b 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -26,6 +26,7 @@ #include <linux/i2c/pcf857x.h> #include <media/tvp514x.h> +#include <media/adv7343.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -38,11 +39,11 @@ #include <mach/common.h> #include <mach/serial.h> -#include <mach/i2c.h> -#include <mach/nand.h> +#include <linux/platform_data/i2c-davinci.h> +#include <linux/platform_data/mtd-davinci.h> #include <mach/clock.h> #include <mach/cdce949.h> -#include <mach/aemif.h> +#include <linux/platform_data/mtd-davinci-aemif.h> #include "davinci.h" #include "clock.h" @@ -496,18 +497,49 @@ static struct vpif_subdev_info dm646x_vpif_subdev[] = { }, }; -static const char *output[] = { - "Composite", - "Component", - "S-Video", +static const struct vpif_output dm6467_ch0_outputs[] = { + { + .output = { + .index = 0, + .name = "Composite", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .capabilities = V4L2_OUT_CAP_STD, + .std = V4L2_STD_ALL, + }, + .subdev_name = "adv7343", + .output_route = ADV7343_COMPOSITE_ID, + }, + { + .output = { + .index = 1, + .name = "Component", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .capabilities = V4L2_OUT_CAP_CUSTOM_TIMINGS, + }, + .subdev_name = "adv7343", + .output_route = ADV7343_COMPONENT_ID, + }, + { + .output = { + .index = 2, + .name = "S-Video", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .capabilities = V4L2_OUT_CAP_STD, + .std = V4L2_STD_ALL, + }, + .subdev_name = "adv7343", + .output_route = ADV7343_SVIDEO_ID, + }, }; static struct vpif_display_config dm646x_vpif_display_config = { .set_clock = set_vpif_clock, .subdevinfo = dm646x_vpif_subdev, .subdev_count = ARRAY_SIZE(dm646x_vpif_subdev), - .output = output, - .output_count = ARRAY_SIZE(output), + .chan_config[0] = { + .outputs = dm6467_ch0_outputs, + .output_count = ARRAY_SIZE(dm6467_ch0_outputs), + }, .card_name = "DM646x EVM", }; @@ -601,15 +633,6 @@ static struct vpif_subdev_info vpif_capture_sdev_info[] = { I2C_BOARD_INFO("tvp5146", 0x5d), .platform_data = &tvp5146_pdata, }, - .input = INPUT_CVBS_VI2B, - .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, - .can_route = 1, - .vpif_if = { - .if_type = VPIF_IF_BT656, - .hd_pol = 1, - .vd_pol = 1, - .fid_pol = 0, - }, }, { .name = TVP5147_CH1, @@ -617,15 +640,6 @@ static struct vpif_subdev_info vpif_capture_sdev_info[] = { I2C_BOARD_INFO("tvp5146", 0x5c), .platform_data = &tvp5146_pdata, }, - .input = INPUT_SVIDEO_VI2C_VI1C, - .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, - .can_route = 1, - .vpif_if = { - .if_type = VPIF_IF_BT656, - .hd_pol = 1, - .vd_pol = 1, - .fid_pol = 0, - }, }, }; @@ -635,9 +649,12 @@ static const struct vpif_input dm6467_ch0_inputs[] = { .index = 0, .name = "Composite", .type = V4L2_INPUT_TYPE_CAMERA, + .capabilities = V4L2_IN_CAP_STD, .std = TVP514X_STD_ALL, }, .subdev_name = TVP5147_CH0, + .input_route = INPUT_CVBS_VI2B, + .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC, }, }; @@ -647,9 +664,12 @@ static const struct vpif_input dm6467_ch1_inputs[] = { .index = 0, .name = "S-Video", .type = V4L2_INPUT_TYPE_CAMERA, + .capabilities = V4L2_IN_CAP_STD, .std = TVP514X_STD_ALL, }, .subdev_name = TVP5147_CH1, + .input_route = INPUT_SVIDEO_VI2C_VI1C, + .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC, }, }; @@ -661,10 +681,22 @@ static struct vpif_capture_config dm646x_vpif_capture_cfg = { .chan_config[0] = { .inputs = dm6467_ch0_inputs, .input_count = ARRAY_SIZE(dm6467_ch0_inputs), + .vpif_if = { + .if_type = VPIF_IF_BT656, + .hd_pol = 1, + .vd_pol = 1, + .fid_pol = 0, + }, }, .chan_config[1] = { .inputs = dm6467_ch1_inputs, .input_count = ARRAY_SIZE(dm6467_ch1_inputs), + .vpif_if = { + .if_type = VPIF_IF_BT656, + .hd_pol = 1, + .vd_pol = 1, + .fid_pol = 0, + }, }, }; diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index beecde3a1d2f..43e4a0d663fa 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -26,9 +26,9 @@ #include <mach/common.h> #include <mach/cp_intc.h> #include <mach/da8xx.h> -#include <mach/nand.h> +#include <linux/platform_data/mtd-davinci.h> #include <mach/mux.h> -#include <mach/spi.h> +#include <linux/platform_data/spi-davinci.h> #define MITYOMAPL138_PHY_ID "" diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index f6b9fc70161b..144bf31d68dd 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -31,12 +31,12 @@ #include <asm/mach/arch.h> #include <mach/common.h> -#include <mach/i2c.h> +#include <linux/platform_data/i2c-davinci.h> #include <mach/serial.h> #include <mach/mux.h> -#include <mach/nand.h> -#include <mach/mmc.h> -#include <mach/usb.h> +#include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/mmc-davinci.h> +#include <linux/platform_data/usb-davinci.h> #include "davinci.h" diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 9078acf94bac..6957787fa7f3 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -36,10 +36,10 @@ #include <asm/mach/flash.h> #include <mach/common.h> -#include <mach/i2c.h> +#include <linux/platform_data/i2c-davinci.h> #include <mach/serial.h> #include <mach/mux.h> -#include <mach/usb.h> +#include <linux/platform_data/usb-davinci.h> #include "davinci.h" diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c index ac4e003ad863..be3099733b1f 100644 --- a/arch/arm/mach-davinci/board-tnetv107x-evm.c +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c @@ -88,7 +88,7 @@ static struct davinci_mmc_config mmc_config = { .version = MMC_CTLR_VERSION_1, }; -static const short sdio1_pins[] __initdata = { +static const short sdio1_pins[] __initconst = { TNETV107X_SDIO1_CLK_1, TNETV107X_SDIO1_CMD_1, TNETV107X_SDIO1_DATA0_1, TNETV107X_SDIO1_DATA1_1, TNETV107X_SDIO1_DATA2_1, TNETV107X_SDIO1_DATA3_1, @@ -96,12 +96,12 @@ static const short sdio1_pins[] __initdata = { -1 }; -static const short uart1_pins[] __initdata = { +static const short uart1_pins[] __initconst = { TNETV107X_UART1_RD, TNETV107X_UART1_TD, -1 }; -static const short ssp_pins[] __initdata = { +static const short ssp_pins[] __initconst = { TNETV107X_SSP0_0, TNETV107X_SSP0_1, TNETV107X_SSP0_2, TNETV107X_SSP1_0, TNETV107X_SSP1_1, TNETV107X_SSP1_2, TNETV107X_SSP1_3, -1 diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index deee5c2da754..510648e0394b 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -838,7 +838,7 @@ static const struct mux_config da830_pins[] = { #endif }; -const short da830_emif25_pins[] __initdata = { +const short da830_emif25_pins[] __initconst = { DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3, DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7, DA830_EMA_D_8, DA830_EMA_D_9, DA830_EMA_D_10, DA830_EMA_D_11, @@ -853,19 +853,19 @@ const short da830_emif25_pins[] __initdata = { -1 }; -const short da830_spi0_pins[] __initdata = { +const short da830_spi0_pins[] __initconst = { DA830_SPI0_SOMI_0, DA830_SPI0_SIMO_0, DA830_SPI0_CLK, DA830_NSPI0_ENA, DA830_NSPI0_SCS_0, -1 }; -const short da830_spi1_pins[] __initdata = { +const short da830_spi1_pins[] __initconst = { DA830_SPI1_SOMI_0, DA830_SPI1_SIMO_0, DA830_SPI1_CLK, DA830_NSPI1_ENA, DA830_NSPI1_SCS_0, -1 }; -const short da830_mmc_sd_pins[] __initdata = { +const short da830_mmc_sd_pins[] __initconst = { DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2, DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5, DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK, @@ -873,32 +873,32 @@ const short da830_mmc_sd_pins[] __initdata = { -1 }; -const short da830_uart0_pins[] __initdata = { +const short da830_uart0_pins[] __initconst = { DA830_NUART0_CTS, DA830_NUART0_RTS, DA830_UART0_RXD, DA830_UART0_TXD, -1 }; -const short da830_uart1_pins[] __initdata = { +const short da830_uart1_pins[] __initconst = { DA830_UART1_RXD, DA830_UART1_TXD, -1 }; -const short da830_uart2_pins[] __initdata = { +const short da830_uart2_pins[] __initconst = { DA830_UART2_RXD, DA830_UART2_TXD, -1 }; -const short da830_usb20_pins[] __initdata = { +const short da830_usb20_pins[] __initconst = { DA830_USB0_DRVVBUS, DA830_USB_REFCLKIN, -1 }; -const short da830_usb11_pins[] __initdata = { +const short da830_usb11_pins[] __initconst = { DA830_USB_REFCLKIN, -1 }; -const short da830_uhpi_pins[] __initdata = { +const short da830_uhpi_pins[] __initconst = { DA830_UHPI_HD_0, DA830_UHPI_HD_1, DA830_UHPI_HD_2, DA830_UHPI_HD_3, DA830_UHPI_HD_4, DA830_UHPI_HD_5, DA830_UHPI_HD_6, DA830_UHPI_HD_7, DA830_UHPI_HD_8, DA830_UHPI_HD_9, DA830_UHPI_HD_10, DA830_UHPI_HD_11, @@ -909,14 +909,14 @@ const short da830_uhpi_pins[] __initdata = { -1 }; -const short da830_cpgmac_pins[] __initdata = { +const short da830_cpgmac_pins[] __initconst = { DA830_RMII_TXD_0, DA830_RMII_TXD_1, DA830_RMII_TXEN, DA830_RMII_CRS_DV, DA830_RMII_RXD_0, DA830_RMII_RXD_1, DA830_RMII_RXER, DA830_MDIO_CLK, DA830_MDIO_D, -1 }; -const short da830_emif3c_pins[] __initdata = { +const short da830_emif3c_pins[] __initconst = { DA830_EMB_SDCKE, DA830_EMB_CLK_GLUE, DA830_EMB_CLK, DA830_NEMB_CS_0, DA830_NEMB_CAS, DA830_NEMB_RAS, DA830_NEMB_WE, DA830_EMB_BA_1, DA830_EMB_BA_0, DA830_EMB_A_0, DA830_EMB_A_1, DA830_EMB_A_2, @@ -935,7 +935,7 @@ const short da830_emif3c_pins[] __initdata = { -1 }; -const short da830_mcasp0_pins[] __initdata = { +const short da830_mcasp0_pins[] __initconst = { DA830_AHCLKX0, DA830_ACLKX0, DA830_AFSX0, DA830_AHCLKR0, DA830_ACLKR0, DA830_AFSR0, DA830_AMUTE0, DA830_AXR0_0, DA830_AXR0_1, DA830_AXR0_2, DA830_AXR0_3, @@ -945,7 +945,7 @@ const short da830_mcasp0_pins[] __initdata = { -1 }; -const short da830_mcasp1_pins[] __initdata = { +const short da830_mcasp1_pins[] __initconst = { DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_ACLKR1, DA830_AFSR1, DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_3, @@ -954,24 +954,24 @@ const short da830_mcasp1_pins[] __initdata = { -1 }; -const short da830_mcasp2_pins[] __initdata = { +const short da830_mcasp2_pins[] __initconst = { DA830_AHCLKX2, DA830_ACLKX2, DA830_AFSX2, DA830_AHCLKR2, DA830_ACLKR2, DA830_AFSR2, DA830_AMUTE2, DA830_AXR2_0, DA830_AXR2_1, DA830_AXR2_2, DA830_AXR2_3, -1 }; -const short da830_i2c0_pins[] __initdata = { +const short da830_i2c0_pins[] __initconst = { DA830_I2C0_SDA, DA830_I2C0_SCL, -1 }; -const short da830_i2c1_pins[] __initdata = { +const short da830_i2c1_pins[] __initconst = { DA830_I2C1_SCL, DA830_I2C1_SDA, -1 }; -const short da830_lcdcntl_pins[] __initdata = { +const short da830_lcdcntl_pins[] __initconst = { DA830_LCD_D_0, DA830_LCD_D_1, DA830_LCD_D_2, DA830_LCD_D_3, DA830_LCD_D_4, DA830_LCD_D_5, DA830_LCD_D_6, DA830_LCD_D_7, DA830_LCD_D_8, DA830_LCD_D_9, DA830_LCD_D_10, DA830_LCD_D_11, @@ -981,34 +981,34 @@ const short da830_lcdcntl_pins[] __initdata = { -1 }; -const short da830_pwm_pins[] __initdata = { +const short da830_pwm_pins[] __initconst = { DA830_ECAP0_APWM0, DA830_ECAP1_APWM1, DA830_EPWM0B, DA830_EPWM0A, DA830_EPWMSYNCI, DA830_EPWMSYNC0, DA830_ECAP2_APWM2, DA830_EHRPWMGLUETZ, DA830_EPWM2B, DA830_EPWM2A, DA830_EPWM1B, DA830_EPWM1A, -1 }; -const short da830_ecap0_pins[] __initdata = { +const short da830_ecap0_pins[] __initconst = { DA830_ECAP0_APWM0, -1 }; -const short da830_ecap1_pins[] __initdata = { +const short da830_ecap1_pins[] __initconst = { DA830_ECAP1_APWM1, -1 }; -const short da830_ecap2_pins[] __initdata = { +const short da830_ecap2_pins[] __initconst = { DA830_ECAP2_APWM2, -1 }; -const short da830_eqep0_pins[] __initdata = { +const short da830_eqep0_pins[] __initconst = { DA830_EQEP0I, DA830_EQEP0S, DA830_EQEP0A, DA830_EQEP0B, -1 }; -const short da830_eqep1_pins[] __initdata = { +const short da830_eqep1_pins[] __initconst = { DA830_EQEP1I, DA830_EQEP1S, DA830_EQEP1A, DA830_EQEP1B, -1 }; diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index b44dc844e15e..b90c172d5541 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -347,6 +347,13 @@ static struct clk spi1_clk = { .flags = DA850_CLK_ASYNC3, }; +static struct clk vpif_clk = { + .name = "vpif", + .parent = &pll0_sysclk2, + .lpsc = DA850_LPSC1_VPIF, + .gpsc = 1, +}; + static struct clk sata_clk = { .name = "sata", .parent = &pll0_sysclk2, @@ -397,6 +404,7 @@ static struct clk_lookup da850_clks[] = { CLK(NULL, "usb20", &usb20_clk), CLK("spi_davinci.0", NULL, &spi0_clk), CLK("spi_davinci.1", NULL, &spi1_clk), + CLK("vpif", NULL, &vpif_clk), CLK("ahci", NULL, &sata_clk), CLK(NULL, NULL, NULL), }; @@ -573,20 +581,60 @@ static const struct mux_config da850_pins[] = { MUX_CFG(DA850, GPIO6_10, 13, 20, 15, 8, false) MUX_CFG(DA850, GPIO6_13, 13, 8, 15, 8, false) MUX_CFG(DA850, RTC_ALARM, 0, 28, 15, 2, false) + /* VPIF Capture */ + MUX_CFG(DA850, VPIF_DIN0, 15, 4, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN1, 15, 0, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN2, 14, 28, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN3, 14, 24, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN4, 14, 20, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN5, 14, 16, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN6, 14, 12, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN7, 14, 8, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN8, 16, 4, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN9, 16, 0, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN10, 15, 28, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN11, 15, 24, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN12, 15, 20, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN13, 15, 16, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN14, 15, 12, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN15, 15, 8, 15, 1, false) + MUX_CFG(DA850, VPIF_CLKIN0, 14, 0, 15, 1, false) + MUX_CFG(DA850, VPIF_CLKIN1, 14, 4, 15, 1, false) + MUX_CFG(DA850, VPIF_CLKIN2, 19, 8, 15, 1, false) + MUX_CFG(DA850, VPIF_CLKIN3, 19, 16, 15, 1, false) + /* VPIF Display */ + MUX_CFG(DA850, VPIF_DOUT0, 17, 4, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT1, 17, 0, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT2, 16, 28, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT3, 16, 24, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT4, 16, 20, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT5, 16, 16, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT6, 16, 12, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT7, 16, 8, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT8, 18, 4, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT9, 18, 0, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT10, 17, 28, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT11, 17, 24, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT12, 17, 20, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT13, 17, 16, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT14, 17, 12, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT15, 17, 8, 15, 1, false) + MUX_CFG(DA850, VPIF_CLKO2, 19, 12, 15, 1, false) + MUX_CFG(DA850, VPIF_CLKO3, 19, 20, 15, 1, false) #endif }; -const short da850_i2c0_pins[] __initdata = { +const short da850_i2c0_pins[] __initconst = { DA850_I2C0_SDA, DA850_I2C0_SCL, -1 }; -const short da850_i2c1_pins[] __initdata = { +const short da850_i2c1_pins[] __initconst = { DA850_I2C1_SCL, DA850_I2C1_SDA, -1 }; -const short da850_lcdcntl_pins[] __initdata = { +const short da850_lcdcntl_pins[] __initconst = { DA850_LCD_D_0, DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3, DA850_LCD_D_4, DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7, DA850_LCD_D_8, DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11, @@ -595,6 +643,26 @@ const short da850_lcdcntl_pins[] __initdata = { -1 }; +const short da850_vpif_capture_pins[] __initdata = { + DA850_VPIF_DIN0, DA850_VPIF_DIN1, DA850_VPIF_DIN2, DA850_VPIF_DIN3, + DA850_VPIF_DIN4, DA850_VPIF_DIN5, DA850_VPIF_DIN6, DA850_VPIF_DIN7, + DA850_VPIF_DIN8, DA850_VPIF_DIN9, DA850_VPIF_DIN10, DA850_VPIF_DIN11, + DA850_VPIF_DIN12, DA850_VPIF_DIN13, DA850_VPIF_DIN14, DA850_VPIF_DIN15, + DA850_VPIF_CLKIN0, DA850_VPIF_CLKIN1, DA850_VPIF_CLKIN2, + DA850_VPIF_CLKIN3, + -1 +}; + +const short da850_vpif_display_pins[] __initdata = { + DA850_VPIF_DOUT0, DA850_VPIF_DOUT1, DA850_VPIF_DOUT2, DA850_VPIF_DOUT3, + DA850_VPIF_DOUT4, DA850_VPIF_DOUT5, DA850_VPIF_DOUT6, DA850_VPIF_DOUT7, + DA850_VPIF_DOUT8, DA850_VPIF_DOUT9, DA850_VPIF_DOUT10, + DA850_VPIF_DOUT11, DA850_VPIF_DOUT12, DA850_VPIF_DOUT13, + DA850_VPIF_DOUT14, DA850_VPIF_DOUT15, DA850_VPIF_CLKO2, + DA850_VPIF_CLKO3, + -1 +}; + /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = { [IRQ_DA8XX_COMMTX] = 7, @@ -939,7 +1007,7 @@ static struct platform_device da850_cpufreq_device = { unsigned int da850_max_speed = 300000; -int __init da850_register_cpufreq(char *async_clk) +int da850_register_cpufreq(char *async_clk) { int i; @@ -1064,6 +1132,90 @@ no_ddrpll_mem: return ret; } +/* VPIF resource, platform data */ +static u64 da850_vpif_dma_mask = DMA_BIT_MASK(32); + +static struct resource da850_vpif_resource[] = { + { + .start = DA8XX_VPIF_BASE, + .end = DA8XX_VPIF_BASE + 0xfff, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device da850_vpif_dev = { + .name = "vpif", + .id = -1, + .dev = { + .dma_mask = &da850_vpif_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = da850_vpif_resource, + .num_resources = ARRAY_SIZE(da850_vpif_resource), +}; + +static struct resource da850_vpif_display_resource[] = { + { + .start = IRQ_DA850_VPIFINT, + .end = IRQ_DA850_VPIFINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device da850_vpif_display_dev = { + .name = "vpif_display", + .id = -1, + .dev = { + .dma_mask = &da850_vpif_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = da850_vpif_display_resource, + .num_resources = ARRAY_SIZE(da850_vpif_display_resource), +}; + +static struct resource da850_vpif_capture_resource[] = { + { + .start = IRQ_DA850_VPIFINT, + .end = IRQ_DA850_VPIFINT, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA850_VPIFINT, + .end = IRQ_DA850_VPIFINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device da850_vpif_capture_dev = { + .name = "vpif_capture", + .id = -1, + .dev = { + .dma_mask = &da850_vpif_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = da850_vpif_capture_resource, + .num_resources = ARRAY_SIZE(da850_vpif_capture_resource), +}; + +int __init da850_register_vpif(void) +{ + return platform_device_register(&da850_vpif_dev); +} + +int __init da850_register_vpif_display(struct vpif_display_config + *display_config) +{ + da850_vpif_display_dev.dev.platform_data = display_config; + return platform_device_register(&da850_vpif_display_dev); +} + +int __init da850_register_vpif_capture(struct vpif_capture_config + *capture_config) +{ + da850_vpif_capture_dev.dev.platform_data = capture_config; + return platform_device_register(&da850_vpif_capture_dev); +} + static struct davinci_soc_info davinci_soc_info_da850 = { .io_desc = da850_io_desc, .io_desc_num = ARRAY_SIZE(da850_io_desc), diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h index 8db0fc6809dd..12d544befcfa 100644 --- a/arch/arm/mach-davinci/davinci.h +++ b/arch/arm/mach-davinci/davinci.h @@ -22,10 +22,10 @@ #include <linux/davinci_emac.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> - -#include <mach/asp.h> -#include <mach/keyscan.h> +#include <linux/platform_data/davinci_asp.h> +#include <linux/platform_data/keyscan-davinci.h> #include <mach/hardware.h> +#include <mach/edma.h> #include <media/davinci/vpfe_capture.h> #include <media/davinci/vpif_types.h> diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 783eab6845c4..bd2f72b414bc 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -24,6 +24,7 @@ #include <mach/cpuidle.h> #include "clock.h" +#include "asp.h" #define DA8XX_TPCC_BASE 0x01c00000 #define DA8XX_TPTC0_BASE 0x01c08000 @@ -505,15 +506,8 @@ static struct platform_device da850_mcasp_device = { .resource = da850_mcasp_resources, }; -static struct platform_device davinci_pcm_device = { - .name = "davinci-pcm-audio", - .id = -1, -}; - void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata) { - platform_device_register(&davinci_pcm_device); - /* DA830/OMAP-L137 has 3 instances of McASP */ if (cpu_is_davinci_da830() && id == 1) { da830_mcasp1_device.dev.platform_data = pdata; diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index d2f9666284a7..4c48a36ee567 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -15,12 +15,12 @@ #include <linux/io.h> #include <mach/hardware.h> -#include <mach/i2c.h> +#include <linux/platform_data/i2c-davinci.h> #include <mach/irqs.h> #include <mach/cputype.h> #include <mach/mux.h> #include <mach/edma.h> -#include <mach/mmc.h> +#include <linux/platform_data/mmc-davinci.h> #include <mach/time.h> #include "davinci.h" @@ -313,16 +313,6 @@ static void davinci_init_wdt(void) /*-------------------------------------------------------------------------*/ -static struct platform_device davinci_pcm_device = { - .name = "davinci-pcm-audio", - .id = -1, -}; - -static void davinci_init_pcm(void) -{ - platform_device_register(&davinci_pcm_device); -} - /*-------------------------------------------------------------------------*/ struct davinci_timer_instance davinci_timer_instance[2] = { @@ -345,7 +335,6 @@ static int __init davinci_init_devices(void) /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ - davinci_init_pcm(); davinci_init_wdt(); return 0; diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 678cd99b7336..a255434908db 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -26,13 +26,13 @@ #include <mach/time.h> #include <mach/serial.h> #include <mach/common.h> -#include <mach/asp.h> -#include <mach/spi.h> +#include <linux/platform_data/spi-davinci.h> #include <mach/gpio-davinci.h> #include "davinci.h" #include "clock.h" #include "mux.h" +#include "asp.h" #define DM355_UART2_BASE (IO_PHYS + 0x206000) diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index a50d49de1883..b680c832e0ba 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -29,14 +29,14 @@ #include <mach/time.h> #include <mach/serial.h> #include <mach/common.h> -#include <mach/asp.h> -#include <mach/keyscan.h> -#include <mach/spi.h> +#include <linux/platform_data/keyscan-davinci.h> +#include <linux/platform_data/spi-davinci.h> #include <mach/gpio-davinci.h> #include "davinci.h" #include "clock.h" #include "mux.h" +#include "asp.h" #define DM365_REF_FREQ 24000000 /* 24 MHz on the DM365 EVM */ diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index c8b866657fcb..cd0c8b1e1ecf 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -23,12 +23,12 @@ #include <mach/time.h> #include <mach/serial.h> #include <mach/common.h> -#include <mach/asp.h> #include <mach/gpio-davinci.h> #include "davinci.h" #include "clock.h" #include "mux.h" +#include "asp.h" /* * Device specific clocks @@ -701,7 +701,7 @@ static struct resource dm644x_venc_resources[] = { #define DM644X_VPSS_DACCLKEN BIT(4) static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type, - unsigned int mode) + unsigned int pclock) { int ret = 0; u32 v = DM644X_VPSS_VENCLKEN; @@ -711,27 +711,18 @@ static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type, v |= DM644X_VPSS_DACCLKEN; writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL)); break; - case VPBE_ENC_DV_PRESET: - switch (mode) { - case V4L2_DV_480P59_94: - case V4L2_DV_576P50: + case VPBE_ENC_CUSTOM_TIMINGS: + if (pclock <= 27000000) { v |= DM644X_VPSS_MUXSEL_PLL2_MODE | DM644X_VPSS_DACCLKEN; writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL)); - break; - case V4L2_DV_720P60: - case V4L2_DV_1080I60: - case V4L2_DV_1080P30: + } else { /* * For HD, use external clock source since * HD requires higher clock rate */ v |= DM644X_VPSS_MUXSEL_VPBECLK_MODE; writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL)); - break; - default: - ret = -EINVAL; - break; } break; default: diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 9eb87c1d1edd..97c0f8e555bd 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -24,12 +24,12 @@ #include <mach/time.h> #include <mach/serial.h> #include <mach/common.h> -#include <mach/asp.h> #include <mach/gpio-davinci.h> #include "davinci.h" #include "clock.h" #include "mux.h" +#include "asp.h" #define DAVINCI_VPIF_BASE (0x01C12000) diff --git a/arch/arm/mach-davinci/include/mach/aemif.h b/arch/arm/mach-davinci/include/mach/aemif.h deleted file mode 100644 index 05b293443097..000000000000 --- a/arch/arm/mach-davinci/include/mach/aemif.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * TI DaVinci AEMIF support - * - * Copyright 2010 (C) Texas Instruments, Inc. http://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ -#ifndef _MACH_DAVINCI_AEMIF_H -#define _MACH_DAVINCI_AEMIF_H - -#define NRCSR_OFFSET 0x00 -#define AWCCR_OFFSET 0x04 -#define A1CR_OFFSET 0x10 - -#define ACR_ASIZE_MASK 0x3 -#define ACR_EW_MASK BIT(30) -#define ACR_SS_MASK BIT(31) - -/* All timings in nanoseconds */ -struct davinci_aemif_timing { - u8 wsetup; - u8 wstrobe; - u8 whold; - - u8 rsetup; - u8 rstrobe; - u8 rhold; - - u8 ta; -}; - -int davinci_aemif_setup_timing(struct davinci_aemif_timing *t, - void __iomem *base, unsigned cs); -#endif diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h deleted file mode 100644 index 9aa240909a2c..000000000000 --- a/arch/arm/mach-davinci/include/mach/asp.h +++ /dev/null @@ -1,137 +0,0 @@ -/* - * <mach/asp.h> - DaVinci Audio Serial Port support - */ -#ifndef __ASM_ARCH_DAVINCI_ASP_H -#define __ASM_ARCH_DAVINCI_ASP_H - -#include <mach/irqs.h> -#include <mach/edma.h> - -/* Bases of dm644x and dm355 register banks */ -#define DAVINCI_ASP0_BASE 0x01E02000 -#define DAVINCI_ASP1_BASE 0x01E04000 - -/* Bases of dm365 register banks */ -#define DAVINCI_DM365_ASP0_BASE 0x01D02000 - -/* Bases of dm646x register banks */ -#define DAVINCI_DM646X_MCASP0_REG_BASE 0x01D01000 -#define DAVINCI_DM646X_MCASP1_REG_BASE 0x01D01800 - -/* Bases of da850/da830 McASP0 register banks */ -#define DAVINCI_DA8XX_MCASP0_REG_BASE 0x01D00000 - -/* Bases of da830 McASP1 register banks */ -#define DAVINCI_DA830_MCASP1_REG_BASE 0x01D04000 - -/* EDMA channels of dm644x and dm355 */ -#define DAVINCI_DMA_ASP0_TX 2 -#define DAVINCI_DMA_ASP0_RX 3 -#define DAVINCI_DMA_ASP1_TX 8 -#define DAVINCI_DMA_ASP1_RX 9 - -/* EDMA channels of dm646x */ -#define DAVINCI_DM646X_DMA_MCASP0_AXEVT0 6 -#define DAVINCI_DM646X_DMA_MCASP0_AREVT0 9 -#define DAVINCI_DM646X_DMA_MCASP1_AXEVT1 12 - -/* EDMA channels of da850/da830 McASP0 */ -#define DAVINCI_DA8XX_DMA_MCASP0_AREVT 0 -#define DAVINCI_DA8XX_DMA_MCASP0_AXEVT 1 - -/* EDMA channels of da830 McASP1 */ -#define DAVINCI_DA830_DMA_MCASP1_AREVT 2 -#define DAVINCI_DA830_DMA_MCASP1_AXEVT 3 - -/* Interrupts */ -#define DAVINCI_ASP0_RX_INT IRQ_MBRINT -#define DAVINCI_ASP0_TX_INT IRQ_MBXINT -#define DAVINCI_ASP1_RX_INT IRQ_MBRINT -#define DAVINCI_ASP1_TX_INT IRQ_MBXINT - -struct snd_platform_data { - u32 tx_dma_offset; - u32 rx_dma_offset; - enum dma_event_q asp_chan_q; /* event queue number for ASP channel */ - enum dma_event_q ram_chan_q; /* event queue number for RAM channel */ - unsigned int codec_fmt; - /* - * Allowing this is more efficient and eliminates left and right swaps - * caused by underruns, but will swap the left and right channels - * when compared to previous behavior. - */ - unsigned enable_channel_combine:1; - unsigned sram_size_playback; - unsigned sram_size_capture; - - /* - * If McBSP peripheral gets the clock from an external pin, - * there are three chooses, that are MCBSP_CLKX, MCBSP_CLKR - * and MCBSP_CLKS. - * Depending on different hardware connections it is possible - * to use this setting to change the behaviour of McBSP - * driver. The dm365_clk_input_pin enum is available for dm365 - */ - int clk_input_pin; - - /* - * This flag works when both clock and FS are outputs for the cpu - * and makes clock more accurate (FS is not symmetrical and the - * clock is very fast. - * The clock becoming faster is named - * i2s continuous serial clock (I2S_SCK) and it is an externally - * visible bit clock. - * - * first line : WordSelect - * second line : ContinuousSerialClock - * third line: SerialData - * - * SYMMETRICAL APPROACH: - * _______________________ LEFT - * _| RIGHT |______________________| - * _ _ _ _ _ _ _ _ - * _| |_| |_ x16 _| |_| |_| |_| |_ x16 _| |_| |_ - * _ _ _ _ _ _ _ _ - * _/ \_/ \_ ... _/ \_/ \_/ \_/ \_ ... _/ \_/ \_ - * \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ - * - * ACCURATE CLOCK APPROACH: - * ______________ LEFT - * _| RIGHT |_______________________________| - * _ _ _ _ _ _ _ _ _ - * _| |_ x16 _| |_| |_ x16 _| |_| |_| |_| |_| |_| | - * _ _ _ _ dummy cycles - * _/ \_ ... _/ \_/ \_ ... _/ \__________________ - * \_/ \_/ \_/ \_/ - * - */ - bool i2s_accurate_sck; - - /* McASP specific fields */ - int tdm_slots; - u8 op_mode; - u8 num_serializer; - u8 *serial_dir; - u8 version; - u8 txnumevt; - u8 rxnumevt; -}; - -enum { - MCASP_VERSION_1 = 0, /* DM646x */ - MCASP_VERSION_2, /* DA8xx/OMAPL1x */ -}; - -enum dm365_clk_input_pin { - MCBSP_CLKR = 0, /* DM365 */ - MCBSP_CLKS, -}; - -#define INACTIVE_MODE 0 -#define TX_MODE 1 -#define RX_MODE 2 - -#define DAVINCI_MCASP_IIS_MODE 0 -#define DAVINCI_MCASP_DIT_MODE 1 - -#endif /* __ASM_ARCH_DAVINCI_ASP_H */ diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index a2f1f274f189..aaccdc4528fc 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -16,15 +16,18 @@ #include <linux/platform_device.h> #include <linux/davinci_emac.h> #include <linux/spi/spi.h> +#include <linux/platform_data/davinci_asp.h> +#include <linux/videodev2.h> #include <mach/serial.h> #include <mach/edma.h> -#include <mach/i2c.h> -#include <mach/asp.h> -#include <mach/mmc.h> -#include <mach/usb.h> #include <mach/pm.h> -#include <mach/spi.h> +#include <linux/platform_data/i2c-davinci.h> +#include <linux/platform_data/mmc-davinci.h> +#include <linux/platform_data/usb-davinci.h> +#include <linux/platform_data/spi-davinci.h> + +#include <media/davinci/vpif_types.h> extern void __iomem *da8xx_syscfg0_base; extern void __iomem *da8xx_syscfg1_base; @@ -63,6 +66,7 @@ extern unsigned int da850_max_speed; #define DA8XX_PLL0_BASE 0x01c11000 #define DA8XX_TIMER64P0_BASE 0x01c20000 #define DA8XX_TIMER64P1_BASE 0x01c21000 +#define DA8XX_VPIF_BASE 0x01e17000 #define DA8XX_GPIO_BASE 0x01e26000 #define DA8XX_PSC1_BASE 0x01e27000 #define DA8XX_AEMIF_CS2_BASE 0x60000000 @@ -92,6 +96,11 @@ int da8xx_register_cpuidle(void); void __iomem * __init da8xx_get_mem_ctlr(void); int da850_register_pm(struct platform_device *pdev); int __init da850_register_sata(unsigned long refclkpn); +int __init da850_register_vpif(void); +int __init da850_register_vpif_display + (struct vpif_display_config *display_config); +int __init da850_register_vpif_capture + (struct vpif_capture_config *capture_config); void da8xx_restart(char mode, const char *cmd); extern struct platform_device da8xx_serial_device; @@ -126,6 +135,8 @@ extern const short da830_ecap1_pins[]; extern const short da830_ecap2_pins[]; extern const short da830_eqep0_pins[]; extern const short da830_eqep1_pins[]; +extern const short da850_vpif_capture_pins[]; +extern const short da850_vpif_display_pins[]; extern const short da850_i2c0_pins[]; extern const short da850_i2c1_pins[]; diff --git a/arch/arm/mach-davinci/include/mach/i2c.h b/arch/arm/mach-davinci/include/mach/i2c.h deleted file mode 100644 index 2312d197dfb7..000000000000 --- a/arch/arm/mach-davinci/include/mach/i2c.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * DaVinci I2C controller platform_device info - * - * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com> - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. -*/ - -#ifndef __ASM_ARCH_I2C_H -#define __ASM_ARCH_I2C_H - -/* All frequencies are expressed in kHz */ -struct davinci_i2c_platform_data { - unsigned int bus_freq; /* standard bus frequency (kHz) */ - unsigned int bus_delay; /* post-transaction delay (usec) */ - unsigned int sda_pin; /* GPIO pin ID to use for SDA */ - unsigned int scl_pin; /* GPIO pin ID to use for SCL */ -}; - -/* for board setup code */ -void davinci_init_i2c(struct davinci_i2c_platform_data *); - -#endif /* __ASM_ARCH_I2C_H */ diff --git a/arch/arm/mach-davinci/include/mach/keyscan.h b/arch/arm/mach-davinci/include/mach/keyscan.h deleted file mode 100644 index 7a560e05bda8..000000000000 --- a/arch/arm/mach-davinci/include/mach/keyscan.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments, Inc - * - * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef DAVINCI_KEYSCAN_H -#define DAVINCI_KEYSCAN_H - -#include <linux/io.h> - -enum davinci_matrix_types { - DAVINCI_KEYSCAN_MATRIX_4X4, - DAVINCI_KEYSCAN_MATRIX_5X3, -}; - -struct davinci_ks_platform_data { - int (*device_enable)(struct device *dev); - unsigned short *keymap; - u32 keymapsize; - u8 rep:1; - u8 strobe; - u8 interval; - u8 matrix_type; -}; - -#endif - diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h deleted file mode 100644 index 5ba6b22ce338..000000000000 --- a/arch/arm/mach-davinci/include/mach/mmc.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Board-specific MMC configuration - */ - -#ifndef _DAVINCI_MMC_H -#define _DAVINCI_MMC_H - -#include <linux/types.h> -#include <linux/mmc/host.h> - -struct davinci_mmc_config { - /* get_cd()/get_wp() may sleep */ - int (*get_cd)(int module); - int (*get_ro)(int module); - - void (*set_power)(int module, bool on); - - /* wires == 0 is equivalent to wires == 4 (4-bit parallel) */ - u8 wires; - - u32 max_freq; - - /* any additional host capabilities: OR'd in to mmc->f_caps */ - u32 caps; - - /* Version of the MMC/SD controller */ - u8 version; - - /* Number of sg segments */ - u8 nr_sg; -}; -void davinci_setup_mmc(int module, struct davinci_mmc_config *config); - -enum { - MMC_CTLR_VERSION_1 = 0, /* DM644x and DM355 */ - MMC_CTLR_VERSION_2, /* DA830 */ -}; - -#endif diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index a7e92fca32e6..9e95b8a1edb6 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -928,6 +928,48 @@ enum davinci_da850_index { DA850_GPIO6_10, DA850_GPIO6_13, DA850_RTC_ALARM, + + /* VPIF Capture */ + DA850_VPIF_DIN0, + DA850_VPIF_DIN1, + DA850_VPIF_DIN2, + DA850_VPIF_DIN3, + DA850_VPIF_DIN4, + DA850_VPIF_DIN5, + DA850_VPIF_DIN6, + DA850_VPIF_DIN7, + DA850_VPIF_DIN8, + DA850_VPIF_DIN9, + DA850_VPIF_DIN10, + DA850_VPIF_DIN11, + DA850_VPIF_DIN12, + DA850_VPIF_DIN13, + DA850_VPIF_DIN14, + DA850_VPIF_DIN15, + DA850_VPIF_CLKIN0, + DA850_VPIF_CLKIN1, + DA850_VPIF_CLKIN2, + DA850_VPIF_CLKIN3, + + /* VPIF Display */ + DA850_VPIF_DOUT0, + DA850_VPIF_DOUT1, + DA850_VPIF_DOUT2, + DA850_VPIF_DOUT3, + DA850_VPIF_DOUT4, + DA850_VPIF_DOUT5, + DA850_VPIF_DOUT6, + DA850_VPIF_DOUT7, + DA850_VPIF_DOUT8, + DA850_VPIF_DOUT9, + DA850_VPIF_DOUT10, + DA850_VPIF_DOUT11, + DA850_VPIF_DOUT12, + DA850_VPIF_DOUT13, + DA850_VPIF_DOUT14, + DA850_VPIF_DOUT15, + DA850_VPIF_CLKO2, + DA850_VPIF_CLKO3, }; enum davinci_tnetv107x_index { diff --git a/arch/arm/mach-davinci/include/mach/nand.h b/arch/arm/mach-davinci/include/mach/nand.h deleted file mode 100644 index 1cf555aef896..000000000000 --- a/arch/arm/mach-davinci/include/mach/nand.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - * mach-davinci/nand.h - * - * Copyright © 2006 Texas Instruments. - * - * Ported to 2.6.23 Copyright © 2008 by - * Sander Huijsen <Shuijsen@optelecom-nkf.com> - * Troy Kisky <troy.kisky@boundarydevices.com> - * Dirk Behme <Dirk.Behme@gmail.com> - * - * -------------------------------------------------------------------------- - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ARCH_ARM_DAVINCI_NAND_H -#define __ARCH_ARM_DAVINCI_NAND_H - -#include <linux/mtd/nand.h> - -#define NANDFCR_OFFSET 0x60 -#define NANDFSR_OFFSET 0x64 -#define NANDF1ECC_OFFSET 0x70 - -/* 4-bit ECC syndrome registers */ -#define NAND_4BIT_ECC_LOAD_OFFSET 0xbc -#define NAND_4BIT_ECC1_OFFSET 0xc0 -#define NAND_4BIT_ECC2_OFFSET 0xc4 -#define NAND_4BIT_ECC3_OFFSET 0xc8 -#define NAND_4BIT_ECC4_OFFSET 0xcc -#define NAND_ERR_ADD1_OFFSET 0xd0 -#define NAND_ERR_ADD2_OFFSET 0xd4 -#define NAND_ERR_ERRVAL1_OFFSET 0xd8 -#define NAND_ERR_ERRVAL2_OFFSET 0xdc - -/* NOTE: boards don't need to use these address bits - * for ALE/CLE unless they support booting from NAND. - * They're used unless platform data overrides them. - */ -#define MASK_ALE 0x08 -#define MASK_CLE 0x10 - -struct davinci_nand_pdata { /* platform_data */ - uint32_t mask_ale; - uint32_t mask_cle; - - /* for packages using two chipselects */ - uint32_t mask_chipsel; - - /* board's default static partition info */ - struct mtd_partition *parts; - unsigned nr_parts; - - /* none == NAND_ECC_NONE (strongly *not* advised!!) - * soft == NAND_ECC_SOFT - * else == NAND_ECC_HW, according to ecc_bits - * - * All DaVinci-family chips support 1-bit hardware ECC. - * Newer ones also support 4-bit ECC, but are awkward - * using it with large page chips. - */ - nand_ecc_modes_t ecc_mode; - u8 ecc_bits; - - /* e.g. NAND_BUSWIDTH_16 */ - unsigned options; - /* e.g. NAND_BBT_USE_FLASH */ - unsigned bbt_options; - - /* Main and mirror bbt descriptor overrides */ - struct nand_bbt_descr *bbt_td; - struct nand_bbt_descr *bbt_md; - - /* Access timings */ - struct davinci_aemif_timing *timing; -}; - -#endif /* __ARCH_ARM_DAVINCI_NAND_H */ diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 405318e35bf6..40a0027838e8 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -166,6 +166,7 @@ #define DA830_LPSC1_McASP1 8 #define DA850_LPSC1_SATA 8 #define DA830_LPSC1_McASP2 9 +#define DA850_LPSC1_VPIF 9 #define DA8XX_LPSC1_SPI1 10 #define DA8XX_LPSC1_I2C 11 #define DA8XX_LPSC1_UART1 12 diff --git a/arch/arm/mach-davinci/include/mach/spi.h b/arch/arm/mach-davinci/include/mach/spi.h deleted file mode 100644 index 7af305b37868..000000000000 --- a/arch/arm/mach-davinci/include/mach/spi.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * Copyright 2009 Texas Instruments. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ARCH_ARM_DAVINCI_SPI_H -#define __ARCH_ARM_DAVINCI_SPI_H - -#include <mach/edma.h> - -#define SPI_INTERN_CS 0xFF - -enum { - SPI_VERSION_1, /* For DM355/DM365/DM6467 */ - SPI_VERSION_2, /* For DA8xx */ -}; - -/** - * davinci_spi_platform_data - Platform data for SPI master device on DaVinci - * - * @version: version of the SPI IP. Different DaVinci devices have slightly - * varying versions of the same IP. - * @num_chipselect: number of chipselects supported by this SPI master - * @intr_line: interrupt line used to connect the SPI IP to the ARM interrupt - * controller withn the SoC. Possible values are 0 and 1. - * @chip_sel: list of GPIOs which can act as chip-selects for the SPI. - * SPI_INTERN_CS denotes internal SPI chip-select. Not necessary - * to populate if all chip-selects are internal. - * @cshold_bug: set this to true if the SPI controller on your chip requires - * a write to CSHOLD bit in between transfers (like in DM355). - * @dma_event_q: DMA event queue to use if SPI_IO_TYPE_DMA is used for any - * device on the bus. - */ -struct davinci_spi_platform_data { - u8 version; - u8 num_chipselect; - u8 intr_line; - u8 *chip_sel; - bool cshold_bug; - enum dma_event_q dma_event_q; -}; - -/** - * davinci_spi_config - Per-chip-select configuration for SPI slave devices - * - * @wdelay: amount of delay between transmissions. Measured in number of - * SPI module clocks. - * @odd_parity: polarity of parity flag at the end of transmit data stream. - * 0 - odd parity, 1 - even parity. - * @parity_enable: enable transmission of parity at end of each transmit - * data stream. - * @io_type: type of IO transfer. Choose between polled, interrupt and DMA. - * @timer_disable: disable chip-select timers (setup and hold) - * @c2tdelay: chip-select setup time. Measured in number of SPI module clocks. - * @t2cdelay: chip-select hold time. Measured in number of SPI module clocks. - * @t2edelay: transmit data finished to SPI ENAn pin inactive time. Measured - * in number of SPI clocks. - * @c2edelay: chip-select active to SPI ENAn signal active time. Measured in - * number of SPI clocks. - */ -struct davinci_spi_config { - u8 wdelay; - u8 odd_parity; - u8 parity_enable; -#define SPI_IO_TYPE_INTR 0 -#define SPI_IO_TYPE_POLL 1 -#define SPI_IO_TYPE_DMA 2 - u8 io_type; - u8 timer_disable; - u8 c2tdelay; - u8 t2cdelay; - u8 t2edelay; - u8 c2edelay; -}; - -#endif /* __ARCH_ARM_DAVINCI_SPI_H */ diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h index 83e5926f3c46..1656a02e3eda 100644 --- a/arch/arm/mach-davinci/include/mach/tnetv107x.h +++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h @@ -36,8 +36,8 @@ #include <linux/input/matrix_keypad.h> #include <linux/mfd/ti_ssp.h> -#include <mach/mmc.h> -#include <mach/nand.h> +#include <linux/platform_data/mmc-davinci.h> +#include <linux/platform_data/mtd-davinci.h> #include <mach/serial.h> struct tnetv107x_device_info { diff --git a/arch/arm/mach-davinci/include/mach/usb.h b/arch/arm/mach-davinci/include/mach/usb.h deleted file mode 100644 index e0bc4abe69c2..000000000000 --- a/arch/arm/mach-davinci/include/mach/usb.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * USB related definitions - * - * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_USB_H -#define __ASM_ARCH_USB_H - -/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */ -#define CFGCHIP2_PHYCLKGD (1 << 17) -#define CFGCHIP2_VBUSSENSE (1 << 16) -#define CFGCHIP2_RESET (1 << 15) -#define CFGCHIP2_OTGMODE (3 << 13) -#define CFGCHIP2_NO_OVERRIDE (0 << 13) -#define CFGCHIP2_FORCE_HOST (1 << 13) -#define CFGCHIP2_FORCE_DEVICE (2 << 13) -#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13) -#define CFGCHIP2_USB1PHYCLKMUX (1 << 12) -#define CFGCHIP2_USB2PHYCLKMUX (1 << 11) -#define CFGCHIP2_PHYPWRDN (1 << 10) -#define CFGCHIP2_OTGPWRDN (1 << 9) -#define CFGCHIP2_DATPOL (1 << 8) -#define CFGCHIP2_USB1SUSPENDM (1 << 7) -#define CFGCHIP2_PHY_PLLON (1 << 6) /* override PLL suspend */ -#define CFGCHIP2_SESENDEN (1 << 5) /* Vsess_end comparator */ -#define CFGCHIP2_VBDTCTEN (1 << 4) /* Vbus comparator */ -#define CFGCHIP2_REFFREQ (0xf << 0) -#define CFGCHIP2_REFFREQ_12MHZ (1 << 0) -#define CFGCHIP2_REFFREQ_24MHZ (2 << 0) -#define CFGCHIP2_REFFREQ_48MHZ (3 << 0) - -struct da8xx_ohci_root_hub; - -typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub, - unsigned port); - -/* Passed as the platform data to the OHCI driver */ -struct da8xx_ohci_root_hub { - /* Switch the port power on/off */ - int (*set_power)(unsigned port, int on); - /* Read the port power status */ - int (*get_power)(unsigned port); - /* Read the port over-current indicator */ - int (*get_oci)(unsigned port); - /* Over-current indicator change notification (pass NULL to disable) */ - int (*ocic_notify)(da8xx_ocic_handler_t handler); - - /* Time from power on to power good (in 2 ms units) */ - u8 potpgt; -}; - -void davinci_setup_usb(unsigned mA, unsigned potpgt_ms); - -#endif /* ifndef __ASM_ARCH_USB_H */ diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index 23d2b6d9fa63..f77b95336e2b 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -10,7 +10,7 @@ #include <mach/common.h> #include <mach/irqs.h> #include <mach/cputype.h> -#include <mach/usb.h> +#include <linux/platform_data/usb-davinci.h> #define DAVINCI_USB_OTG_BASE 0x01c64000 |