diff options
Diffstat (limited to 'arch/arm/include/asm')
| -rw-r--r-- | arch/arm/include/asm/cti.h | 179 | ||||
| -rw-r--r-- | arch/arm/include/asm/entry-macro-vic2.S | 57 | ||||
| -rw-r--r-- | arch/arm/include/asm/hardware/cache-l2x0.h | 2 | ||||
| -rw-r--r-- | arch/arm/include/asm/hardware/entry-macro-gic.S | 60 | ||||
| -rw-r--r-- | arch/arm/include/asm/hardware/gic.h | 26 | ||||
| -rw-r--r-- | arch/arm/include/asm/hardware/vic.h | 10 | ||||
| -rw-r--r-- | arch/arm/include/asm/mach/arch.h | 10 | ||||
| -rw-r--r-- | arch/arm/include/asm/perf_event.h | 3 | ||||
| -rw-r--r-- | arch/arm/include/asm/pmu.h | 25 | ||||
| -rw-r--r-- | arch/arm/include/asm/system.h | 1 | ||||
| -rw-r--r-- | arch/arm/include/asm/topology.h | 2 | ||||
| -rw-r--r-- | arch/arm/include/asm/unistd.h | 2 |
12 files changed, 221 insertions, 156 deletions
diff --git a/arch/arm/include/asm/cti.h b/arch/arm/include/asm/cti.h new file mode 100644 index 000000000000..a0ada3ea4358 --- /dev/null +++ b/arch/arm/include/asm/cti.h @@ -0,0 +1,179 @@ +#ifndef __ASMARM_CTI_H +#define __ASMARM_CTI_H + +#include <asm/io.h> + +/* The registers' definition is from section 3.2 of + * Embedded Cross Trigger Revision: r0p0 + */ +#define CTICONTROL 0x000 +#define CTISTATUS 0x004 +#define CTILOCK 0x008 +#define CTIPROTECTION 0x00C +#define CTIINTACK 0x010 +#define CTIAPPSET 0x014 +#define CTIAPPCLEAR 0x018 +#define CTIAPPPULSE 0x01c +#define CTIINEN 0x020 +#define CTIOUTEN 0x0A0 +#define CTITRIGINSTATUS 0x130 +#define CTITRIGOUTSTATUS 0x134 +#define CTICHINSTATUS 0x138 +#define CTICHOUTSTATUS 0x13c +#define CTIPERIPHID0 0xFE0 +#define CTIPERIPHID1 0xFE4 +#define CTIPERIPHID2 0xFE8 +#define CTIPERIPHID3 0xFEC +#define CTIPCELLID0 0xFF0 +#define CTIPCELLID1 0xFF4 +#define CTIPCELLID2 0xFF8 +#define CTIPCELLID3 0xFFC + +/* The below are from section 3.6.4 of + * CoreSight v1.0 Architecture Specification + */ +#define LOCKACCESS 0xFB0 +#define LOCKSTATUS 0xFB4 + +/* write this value to LOCKACCESS will unlock the module, and + * other value will lock the module + */ +#define LOCKCODE 0xC5ACCE55 + +/** + * struct cti - cross trigger interface struct + * @base: mapped virtual address for the cti base + * @irq: irq number for the cti + * @trig_out_for_irq: triger out number which will cause + * the @irq happen + * + * cti struct used to operate cti registers. + */ +struct cti { + void __iomem *base; + int irq; + int trig_out_for_irq; +}; + +/** + * cti_init - initialize the cti instance + * @cti: cti instance + * @base: mapped virtual address for the cti base + * @irq: irq number for the cti + * @trig_out: triger out number which will cause + * the @irq happen + * + * called by machine code to pass the board dependent + * @base, @irq and @trig_out to cti. + */ +static inline void cti_init(struct cti *cti, + void __iomem *base, int irq, int trig_out) +{ + cti->base = base; + cti->irq = irq; + cti->trig_out_for_irq = trig_out; +} + +/** + * cti_map_trigger - use the @chan to map @trig_in to @trig_out + * @cti: cti instance + * @trig_in: trigger in number + * @trig_out: trigger out number + * @channel: channel number + * + * This function maps one trigger in of @trig_in to one trigger + * out of @trig_out using the channel @chan. + */ +static inline void cti_map_trigger(struct cti *cti, + int trig_in, int trig_out, int chan) +{ + void __iomem *base = cti->base; + unsigned long val; + + val = __raw_readl(base + CTIINEN + trig_in * 4); + val |= BIT(chan); + __raw_writel(val, base + CTIINEN + trig_in * 4); + + val = __raw_readl(base + CTIOUTEN + trig_out * 4); + val |= BIT(chan); + __raw_writel(val, base + CTIOUTEN + trig_out * 4); +} + +/** + * cti_enable - enable the cti module + * @cti: cti instance + * + * enable the cti module + */ +static inline void cti_enable(struct cti *cti) +{ + __raw_writel(0x1, cti->base + CTICONTROL); +} + +/** + * cti_disable - disable the cti module + * @cti: cti instance + * + * enable the cti module + */ +static inline void cti_disable(struct cti *cti) +{ + __raw_writel(0, cti->base + CTICONTROL); +} + +/** + * cti_irq_ack - clear the cti irq + * @cti: cti instance + * + * clear the cti irq + */ +static inline void cti_irq_ack(struct cti *cti) +{ + void __iomem *base = cti->base; + unsigned long val; + + val = __raw_readl(base + CTIINTACK); + val |= BIT(cti->trig_out_for_irq); + __raw_writel(val, base + CTIINTACK); +} + +/** + * cti_unlock - unlock cti module + * @cti: cti instance + * + * unlock the cti module, or else any writes to the cti + * module is not allowed. + */ +static inline void cti_unlock(struct cti *cti) +{ + void __iomem *base = cti->base; + unsigned long val; + + val = __raw_readl(base + LOCKSTATUS); + + if (val & 1) { + val = LOCKCODE; + __raw_writel(val, base + LOCKACCESS); + } +} + +/** + * cti_lock - lock cti module + * @cti: cti instance + * + * lock the cti module, so any writes to the cti + * module will be not allowed. + */ +static inline void cti_lock(struct cti *cti) +{ + void __iomem *base = cti->base; + unsigned long val; + + val = __raw_readl(base + LOCKSTATUS); + + if (!(val & 1)) { + val = ~LOCKCODE; + __raw_writel(val, base + LOCKACCESS); + } +} +#endif diff --git a/arch/arm/include/asm/entry-macro-vic2.S b/arch/arm/include/asm/entry-macro-vic2.S deleted file mode 100644 index 3ceb85e43850..000000000000 --- a/arch/arm/include/asm/entry-macro-vic2.S +++ /dev/null @@ -1,57 +0,0 @@ -/* arch/arm/include/asm/entry-macro-vic2.S - * - * Originally arch/arm/mach-s3c6400/include/mach/entry-macro.S - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * Low-level IRQ helper macros for a device with two VICs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. -*/ - -/* This should be included from <mach/entry-macro.S> with the necessary - * defines for virtual addresses and IRQ bases for the two vics. - * - * The code needs the following defined: - * IRQ_VIC0_BASE IRQ number of VIC0's first IRQ - * IRQ_VIC1_BASE IRQ number of VIC1's first IRQ - * VA_VIC0 Virtual address of VIC0 - * VA_VIC1 Virtual address of VIC1 - * - * Note, code assumes VIC0's virtual address is an ARM immediate constant - * away from VIC1. -*/ - -#include <asm/hardware/vic.h> - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =VA_VIC0 - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - @ check the vic0 - mov \irqnr, #IRQ_VIC0_BASE + 31 - ldr \irqstat, [ \base, # VIC_IRQ_STATUS ] - teq \irqstat, #0 - - @ otherwise try vic1 - addeq \tmp, \base, #(VA_VIC1 - VA_VIC0) - addeq \irqnr, \irqnr, #(IRQ_VIC1_BASE - IRQ_VIC0_BASE) - ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] - teqeq \irqstat, #0 - - clzne \irqstat, \irqstat - subne \irqnr, \irqnr, \irqstat - .endm diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 1db1143a9483..7df239bcdf27 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -20,6 +20,8 @@ #ifndef __ASM_ARM_HARDWARE_L2X0_H #define __ASM_ARM_HARDWARE_L2X0_H +#include <linux/errno.h> + #define L2X0_CACHE_ID 0x000 #define L2X0_CACHE_TYPE 0x004 #define L2X0_CTRL 0x100 diff --git a/arch/arm/include/asm/hardware/entry-macro-gic.S b/arch/arm/include/asm/hardware/entry-macro-gic.S deleted file mode 100644 index 74ebc803904d..000000000000 --- a/arch/arm/include/asm/hardware/entry-macro-gic.S +++ /dev/null @@ -1,60 +0,0 @@ -/* - * arch/arm/include/asm/hardware/entry-macro-gic.S - * - * Low-level IRQ helper macros for GIC - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <asm/hardware/gic.h> - -#ifndef HAVE_GET_IRQNR_PREAMBLE - .macro get_irqnr_preamble, base, tmp - ldr \base, =gic_cpu_base_addr - ldr \base, [\base] - .endm -#endif - -/* - * The interrupt numbering scheme is defined in the - * interrupt controller spec. To wit: - * - * Interrupts 0-15 are IPI - * 16-31 are local. We allow 30 to be used for the watchdog. - * 32-1020 are global - * 1021-1022 are reserved - * 1023 is "spurious" (no interrupt) - * - * A simple read from the controller will tell us the number of the highest - * priority enabled interrupt. We then just need to check whether it is in the - * valid range for an IRQ (30-1020 inclusive). - */ - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - ldr \irqstat, [\base, #GIC_CPU_INTACK] - /* bits 12-10 = src CPU, 9-0 = int # */ - - ldr \tmp, =1021 - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #15 - cmpcc \irqnr, \irqnr - cmpne \irqnr, \tmp - cmpcs \irqnr, \irqnr - .endm - -/* We assume that irqstat (the raw value of the IRQ acknowledge - * register) is preserved from the macro above. - * If there is an IPI, we immediately signal end of interrupt on the - * controller, since this requires the original irqstat value which - * we won't easily be able to recreate later. - */ - - .macro test_for_ipi, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #16 - strcc \irqstat, [\base, #GIC_CPU_EOI] - cmpcs \irqnr, \irqnr - .endm diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h index 3e91f22046f5..4bdfe0018696 100644 --- a/arch/arm/include/asm/hardware/gic.h +++ b/arch/arm/include/asm/hardware/gic.h @@ -36,30 +36,22 @@ #include <linux/irqdomain.h> struct device_node; -extern void __iomem *gic_cpu_base_addr; extern struct irq_chip gic_arch_extn; -void gic_init(unsigned int, int, void __iomem *, void __iomem *); +void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *, + u32 offset); int gic_of_init(struct device_node *node, struct device_node *parent); void gic_secondary_init(unsigned int); +void gic_handle_irq(struct pt_regs *regs); void gic_cascade_irq(unsigned int gic_nr, unsigned int irq); void gic_raise_softirq(const struct cpumask *mask, unsigned int irq); -struct gic_chip_data { - void __iomem *dist_base; - void __iomem *cpu_base; -#ifdef CONFIG_CPU_PM - u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)]; - u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)]; - u32 saved_spi_target[DIV_ROUND_UP(1020, 4)]; - u32 __percpu *saved_ppi_enable; - u32 __percpu *saved_ppi_conf; -#endif -#ifdef CONFIG_IRQ_DOMAIN - struct irq_domain domain; -#endif - unsigned int gic_irqs; -}; +static inline void gic_init(unsigned int nr, int start, + void __iomem *dist , void __iomem *cpu) +{ + gic_init_bases(nr, start, dist, cpu, 0); +} + #endif #endif diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h index 5d72550a8097..f42ebd619590 100644 --- a/arch/arm/include/asm/hardware/vic.h +++ b/arch/arm/include/asm/hardware/vic.h @@ -41,7 +41,15 @@ #define VIC_PL192_VECT_ADDR 0xF00 #ifndef __ASSEMBLY__ +#include <linux/compiler.h> +#include <linux/types.h> + +struct device_node; +struct pt_regs; + void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources); -#endif +int vic_of_init(struct device_node *node, struct device_node *parent); +void vic_handle_irq(struct pt_regs *regs); +#endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 7d19425dd496..bcb0c883e21e 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -13,6 +13,7 @@ struct tag; struct meminfo; struct sys_timer; +struct pt_regs; struct machine_desc { unsigned int nr; /* architecture number */ @@ -30,10 +31,10 @@ struct machine_desc { unsigned int video_start; /* start of video RAM */ unsigned int video_end; /* end of video RAM */ - unsigned int reserve_lp0 :1; /* never has lp0 */ - unsigned int reserve_lp1 :1; /* never has lp1 */ - unsigned int reserve_lp2 :1; /* never has lp2 */ - unsigned int soft_reboot :1; /* soft reboot */ + unsigned char reserve_lp0 :1; /* never has lp0 */ + unsigned char reserve_lp1 :1; /* never has lp1 */ + unsigned char reserve_lp2 :1; /* never has lp2 */ + char restart_mode; /* default restart mode */ void (*fixup)(struct tag *, char **, struct meminfo *); void (*reserve)(void);/* reserve mem blocks */ @@ -45,6 +46,7 @@ struct machine_desc { #ifdef CONFIG_MULTI_IRQ_HANDLER void (*handle_irq)(struct pt_regs *); #endif + void (*restart)(char, const char *); }; /* diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index 0f8e3827a89b..99cfe3607989 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -32,7 +32,4 @@ enum arm_perf_pmu_ids { extern enum arm_perf_pmu_ids armpmu_get_pmu_id(void); -extern int -armpmu_get_max_events(void); - #endif /* __ARM_PERF_EVENT_H__ */ diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index 71d99b83cdb9..b5a5be2536c1 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -27,13 +27,22 @@ enum arm_pmu_type { /* * struct arm_pmu_platdata - ARM PMU platform data * - * @handle_irq: an optional handler which will be called from the interrupt and - * passed the address of the low level handler, and can be used to implement - * any platform specific handling before or after calling it. + * @handle_irq: an optional handler which will be called from the + * interrupt and passed the address of the low level handler, + * and can be used to implement any platform specific handling + * before or after calling it. + * @enable_irq: an optional handler which will be called after + * request_irq and be used to handle some platform specific + * irq enablement + * @disable_irq: an optional handler which will be called before + * free_irq and be used to handle some platform specific + * irq disablement */ struct arm_pmu_platdata { irqreturn_t (*handle_irq)(int irq, void *dev, irq_handler_t pmu_handler); + void (*enable_irq)(int irq); + void (*disable_irq)(int irq); }; #ifdef CONFIG_CPU_HAS_PMU @@ -55,16 +64,6 @@ reserve_pmu(enum arm_pmu_type type); extern void release_pmu(enum arm_pmu_type type); -/** - * init_pmu() - Initialise the PMU. - * - * Initialise the system ready for PMU enabling. This should typically set the - * IRQ affinity and nothing else. The users (oprofile/perf events etc) will do - * the actual hardware initialisation. - */ -extern int -init_pmu(enum arm_pmu_type type); - #else /* CONFIG_CPU_HAS_PMU */ #include <linux/err.h> diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 984014b92647..fe7de7571bac 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -101,6 +101,7 @@ extern int __pure cpu_architecture(void); extern void cpu_init(void); void arm_machine_restart(char mode, const char *cmd); +void soft_restart(unsigned long); extern void (*arm_pm_restart)(char str, const char *cmd); #define UDBG_UNDEFINED (1 << 0) diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h index a7e457ed27c3..58b8b84adcd2 100644 --- a/arch/arm/include/asm/topology.h +++ b/arch/arm/include/asm/topology.h @@ -25,7 +25,7 @@ extern struct cputopo_arm cpu_topology[NR_CPUS]; void init_cpu_topology(void); void store_cpu_topology(unsigned int cpuid); -const struct cpumask *cpu_coregroup_mask(unsigned int cpu); +const struct cpumask *cpu_coregroup_mask(int cpu); #else diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index c60a2944f95b..4a1123783806 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -402,6 +402,8 @@ #define __NR_syncfs (__NR_SYSCALL_BASE+373) #define __NR_sendmmsg (__NR_SYSCALL_BASE+374) #define __NR_setns (__NR_SYSCALL_BASE+375) +#define __NR_process_vm_readv (__NR_SYSCALL_BASE+376) +#define __NR_process_vm_writev (__NR_SYSCALL_BASE+377) /* * The following SWIs are ARM private. |