diff options
Diffstat (limited to 'arch/arm/boot')
353 files changed, 18882 insertions, 4362 deletions
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 9eca7aee927f..48fab15cfc02 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -88,7 +88,7 @@ $(obj)/bootpImage: $(obj)/bootp/bootp FORCE $(call if_changed,objcopy) @$(kecho) ' Kernel: $@ is ready' -PHONY += initrd FORCE +PHONY += initrd initrd: @test "$(INITRD_PHYS)" != "" || \ (echo This machine does not support INITRD; exit -1) @@ -107,12 +107,4 @@ uinstall: $(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \ $(obj)/uImage System.map "$(INSTALL_PATH)" -zi: - $(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \ - $(obj)/zImage System.map "$(INSTALL_PATH)" - -i: - $(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \ - $(obj)/Image System.map "$(INSTALL_PATH)" - subdir- := bootp compressed dts diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore index 0714e0334e33..86b2f5d28240 100644 --- a/arch/arm/boot/compressed/.gitignore +++ b/arch/arm/boot/compressed/.gitignore @@ -3,11 +3,7 @@ bswapsdi2.S font.c lib1funcs.S hyp-stub.S -piggy.gzip -piggy.lzo -piggy.lzma -piggy.xzkern -piggy.lz4 +piggy_data vmlinux vmlinux.lds diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 43788b1a1ac5..d50430c40045 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -66,11 +66,11 @@ endif CPPFLAGS_vmlinux.lds := -DTEXT_START="$(ZTEXTADDR)" -DBSS_START="$(ZBSSADDR)" -suffix_$(CONFIG_KERNEL_GZIP) = gzip -suffix_$(CONFIG_KERNEL_LZO) = lzo -suffix_$(CONFIG_KERNEL_LZMA) = lzma -suffix_$(CONFIG_KERNEL_XZ) = xzkern -suffix_$(CONFIG_KERNEL_LZ4) = lz4 +compress-$(CONFIG_KERNEL_GZIP) = gzip +compress-$(CONFIG_KERNEL_LZO) = lzo +compress-$(CONFIG_KERNEL_LZMA) = lzma +compress-$(CONFIG_KERNEL_XZ) = xzkern +compress-$(CONFIG_KERNEL_LZ4) = lz4 # Borrowed libfdt files for the ATAG compatibility mode @@ -89,15 +89,12 @@ ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y) OBJS += $(libfdt_objs) atags_to_fdt.o endif -targets := vmlinux vmlinux.lds \ - piggy.$(suffix_y) piggy.$(suffix_y).o \ - lib1funcs.o lib1funcs.S ashldi3.o ashldi3.S bswapsdi2.o \ - bswapsdi2.S font.o font.c head.o misc.o $(OBJS) +targets := vmlinux vmlinux.lds piggy_data piggy.o \ + lib1funcs.o ashldi3.o bswapsdi2.o \ + head.o $(OBJS) -# Make sure files are removed during clean -extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern piggy.lz4 \ - lib1funcs.S ashldi3.S bswapsdi2.S $(libfdt) $(libfdt_hdrs) \ - hyp-stub.S +clean-files += piggy_data lib1funcs.S ashldi3.S bswapsdi2.S \ + $(libfdt) $(libfdt_hdrs) hyp-stub.S KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING @@ -178,17 +175,17 @@ fi efi-obj-$(CONFIG_EFI_STUB) := $(objtree)/drivers/firmware/efi/libstub/lib.a -$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \ +$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \ $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) \ $(bswapsdi2) $(efi-obj-y) FORCE @$(check_for_multiple_zreladdr) $(call if_changed,ld) @$(check_for_bad_syms) -$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE - $(call if_changed,$(suffix_y)) +$(obj)/piggy_data: $(obj)/../Image FORCE + $(call if_changed,$(compress-y)) -$(obj)/piggy.$(suffix_y).o: $(obj)/piggy.$(suffix_y) FORCE +$(obj)/piggy.o: $(obj)/piggy_data CFLAGS_font.o := -Dstatic= diff --git a/arch/arm/boot/compressed/piggy.gzip.S b/arch/arm/boot/compressed/piggy.S index a68adf91a165..f72088495f43 100644 --- a/arch/arm/boot/compressed/piggy.gzip.S +++ b/arch/arm/boot/compressed/piggy.S @@ -1,6 +1,6 @@ .section .piggydata,#alloc .globl input_data input_data: - .incbin "arch/arm/boot/compressed/piggy.gzip" + .incbin "arch/arm/boot/compressed/piggy_data" .globl input_data_end input_data_end: diff --git a/arch/arm/boot/compressed/piggy.lz4.S b/arch/arm/boot/compressed/piggy.lz4.S deleted file mode 100644 index 3d9a575618a3..000000000000 --- a/arch/arm/boot/compressed/piggy.lz4.S +++ /dev/null @@ -1,6 +0,0 @@ - .section .piggydata,#alloc - .globl input_data -input_data: - .incbin "arch/arm/boot/compressed/piggy.lz4" - .globl input_data_end -input_data_end: diff --git a/arch/arm/boot/compressed/piggy.lzma.S b/arch/arm/boot/compressed/piggy.lzma.S deleted file mode 100644 index d7e69cffbc0a..000000000000 --- a/arch/arm/boot/compressed/piggy.lzma.S +++ /dev/null @@ -1,6 +0,0 @@ - .section .piggydata,#alloc - .globl input_data -input_data: - .incbin "arch/arm/boot/compressed/piggy.lzma" - .globl input_data_end -input_data_end: diff --git a/arch/arm/boot/compressed/piggy.lzo.S b/arch/arm/boot/compressed/piggy.lzo.S deleted file mode 100644 index a425ad95959a..000000000000 --- a/arch/arm/boot/compressed/piggy.lzo.S +++ /dev/null @@ -1,6 +0,0 @@ - .section .piggydata,#alloc - .globl input_data -input_data: - .incbin "arch/arm/boot/compressed/piggy.lzo" - .globl input_data_end -input_data_end: diff --git a/arch/arm/boot/compressed/piggy.xzkern.S b/arch/arm/boot/compressed/piggy.xzkern.S deleted file mode 100644 index 5703f300d027..000000000000 --- a/arch/arm/boot/compressed/piggy.xzkern.S +++ /dev/null @@ -1,6 +0,0 @@ - .section .piggydata,#alloc - .globl input_data -input_data: - .incbin "arch/arm/boot/compressed/piggy.xzkern" - .globl input_data_end -input_data_end: diff --git a/arch/arm/boot/compressed/string.c b/arch/arm/boot/compressed/string.c index 36e53ef9200f..689467448736 100644 --- a/arch/arm/boot/compressed/string.c +++ b/arch/arm/boot/compressed/string.c @@ -65,6 +65,15 @@ size_t strlen(const char *s) return sc - s; } +size_t strnlen(const char *s, size_t count) +{ + const char *sc; + + for (sc = s; count-- && *sc != '\0'; ++sc) + /* nothing */; + return sc - s; +} + int memcmp(const void *cs, const void *ct, size_t count) { const unsigned char *su1 = cs, *su2 = ct, *end = su1 + count; diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a4a6d70e8b26..95c1923ce6fa 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -2,6 +2,8 @@ ifeq ($(CONFIG_OF),y) dtb-$(CONFIG_ARCH_ALPINE) += \ alpine-db.dtb +dtb-$(CONFIG_MACH_ARTPEC6) += \ + artpec6-devboard.dtb dtb-$(CONFIG_MACH_ASM9260) += \ alphascale-asm9260-devkit.dtb # Keep at91 dtb files sorted alphabetically for each SoC @@ -60,6 +62,7 @@ dtb-$(CONFIG_ARCH_AXXIA) += \ axm5516-amarillo.dtb dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2835-rpi-b.dtb \ + bcm2835-rpi-a.dtb \ bcm2835-rpi-b-rev2.dtb \ bcm2835-rpi-b-plus.dtb \ bcm2835-rpi-a-plus.dtb \ @@ -79,6 +82,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4709-buffalo-wxr-1900dhp.dtb \ bcm4709-netgear-r7000.dtb \ bcm4709-netgear-r8000.dtb \ + bcm47094-dlink-dir-885l.dtb \ bcm94708.dtb \ bcm94709.dtb \ bcm953012k.dtb @@ -156,7 +160,8 @@ dtb-$(CONFIG_ARCH_INTEGRATOR) += \ dtb-$(CONFIG_ARCH_KEYSTONE) += \ k2hk-evm.dtb \ k2l-evm.dtb \ - k2e-evm.dtb + k2e-evm.dtb \ + keystone-k2g-evm.dtb dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-b3.dtb \ kirkwood-blackarmor-nas220.dtb \ @@ -189,9 +194,12 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-is2.dtb \ kirkwood-km_kirkwood.dtb \ kirkwood-laplug.dtb \ + kirkwood-linkstation-lsqvl.dtb \ + kirkwood-linkstation-lsvl.dtb \ + kirkwood-linkstation-lswsxl.dtb \ + kirkwood-linkstation-lswvl.dtb \ + kirkwood-linkstation-lswxl.dtb \ kirkwood-lschlv2.dtb \ - kirkwood-lswvl.dtb \ - kirkwood-lswxl.dtb \ kirkwood-lsxhl.dtb \ kirkwood-mplcec4.dtb \ kirkwood-mv88f6281gtw-ge.dtb \ @@ -317,12 +325,17 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-udoo.dtb \ imx6dl-wandboard.dtb \ imx6dl-wandboard-revb1.dtb \ + imx6q-apalis-ixora.dtb \ imx6q-apf6dev.dtb \ imx6q-arm2.dtb \ + imx6q-b450v3.dtb \ + imx6q-b650v3.dtb \ + imx6q-b850v3.dtb \ imx6q-cm-fx6.dtb \ imx6q-cubox-i.dtb \ imx6q-dfi-fs700-m60.dtb \ imx6q-dmo-edmqmx6.dtb \ + imx6q-evi.dtb \ imx6q-gk802.dtb \ imx6q-gw51xx.dtb \ imx6q-gw52xx.dtb \ @@ -332,6 +345,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-gw551x.dtb \ imx6q-gw552x.dtb \ imx6q-hummingboard.dtb \ + imx6q-icore-rqs.dtb \ imx6q-nitrogen6x.dtb \ imx6q-nitrogen6_max.dtb \ imx6q-novena.dtb \ @@ -349,7 +363,9 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-tx6q-1110.dtb \ imx6q-udoo.dtb \ imx6q-wandboard.dtb \ - imx6q-wandboard-revb1.dtb + imx6q-wandboard-revb1.dtb \ + imx6qp-sabreauto.dtb \ + imx6qp-sabresd.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ imx6sl-warp.dtb @@ -460,6 +476,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ omap3-sbc-t3517.dtb \ omap3-sbc-t3530.dtb \ omap3-sbc-t3730.dtb \ + omap3-sniper.dtb \ omap3-thunder.dtb \ omap3-zoom3.dtb dtb-$(CONFIG_SOC_TI81XX) += \ @@ -514,6 +531,7 @@ dtb-$(CONFIG_SOC_DRA7XX) += \ dtb-$(CONFIG_ARCH_ORION5X) += \ orion5x-lacie-d2-network.dtb \ orion5x-lacie-ethernet-disk-mini-v2.dtb \ + orion5x-linkstation-lsgl.dtb \ orion5x-linkstation-lswtgl.dtb \ orion5x-lswsgl.dtb \ orion5x-maxtor-shared-storage-2.dtb \ @@ -524,6 +542,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ qcom-apq8064-sony-xperia-yuga.dtb \ + qcom-apq8064-asus-nexus7-flo.dtb \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ @@ -611,6 +630,7 @@ dtb-$(CONFIG_ARCH_STI) += \ stih418-b2199.dtb dtb-$(CONFIG_ARCH_STM32)+= \ stm32f429-disco.dtb \ + stm32f469-disco.dtb \ stm32429i-eval.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ @@ -666,8 +686,10 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ sun7i-a20-hummingbird.dtb \ + sun7i-a20-itead-ibox.dtb \ sun7i-a20-i12-tvbox.dtb \ sun7i-a20-icnova-swac.dtb \ + sun7i-a20-lamobo-r1.dtb \ sun7i-a20-m3.dtb \ sun7i-a20-mk808c.dtb \ sun7i-a20-olimex-som-evb.dtb \ @@ -691,6 +713,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a33-ippo-q8h-v1.2.dtb \ sun8i-a33-q8-tablet.dtb \ sun8i-a33-sinlinx-sina33.dtb \ + sun8i-a83t-allwinner-h8homlet-v2.dtb \ + sun8i-a83t-cubietruck-plus.dtb \ sun8i-h3-orangepi-plus.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ @@ -736,7 +760,9 @@ dtb-$(CONFIG_ARCH_U8500) += \ dtb-$(CONFIG_ARCH_UNIPHIER) += \ uniphier-ph1-ld4-ref.dtb \ uniphier-ph1-ld6b-ref.dtb \ + uniphier-ph1-pro4-ace.dtb \ uniphier-ph1-pro4-ref.dtb \ + uniphier-ph1-pro4-sanji.dtb \ uniphier-ph1-sld3-ref.dtb \ uniphier-ph1-sld8-ref.dtb \ uniphier-proxstream2-gentil.dtb \ @@ -809,6 +835,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt6580-evbp1.dtb \ mt6589-aquaris5.dtb \ mt6592-evb.dtb \ + mt7623-evb.dtb \ mt8127-moose.dtb \ mt8135-evbp1.dtb dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/alpine.dtsi index 9af2d60e9a7f..db8752fc480e 100644 --- a/arch/arm/boot/dts/alpine.dtsi +++ b/arch/arm/boot/dts/alpine.dtsi @@ -155,6 +155,16 @@ ranges = <0x02000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>; bus-range = <0x00 0x00>; + msi-parent = <&msix>; + }; + + msix: msix@fbe00000 { + compatible = "al,alpine-msix"; + reg = <0x0 0xfbe00000 0x0 0x100000>; + interrupt-controller; + msi-controller; + al,msi-base-spi = <96>; + al,msi-num-spis = <64>; }; }; }; diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts index ded1eb64ea52..6c667fb35449 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts @@ -236,7 +236,11 @@ status = "okay"; nand@0,0 { - reg = <0 0 0>; /* CS0, offset 0 */ + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <8>; ti,nand-ecc-opt = "bch8"; ti,nand-xfer-type = "polled"; @@ -257,12 +261,9 @@ gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi index 857d9894103a..95461a28bc98 100644 --- a/arch/arm/boot/dts/am335x-chilisom.dtsi +++ b/arch/arm/boot/dts/am335x-chilisom.dtsi @@ -7,6 +7,7 @@ * published by the Free Software Foundation. */ #include "am33xx.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Grinn AM335x ChiliSOM"; @@ -208,7 +209,11 @@ pinctrl-0 = <&nandflash_pins>; ranges = <0 0 0x08000000 0x01000000>; /* CS0 0 @addr 0x08000000, size 0x01000000 */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <8>; @@ -227,12 +232,9 @@ gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; }; diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts index 42e9b665582a..e835644c5054 100644 --- a/arch/arm/boot/dts/am335x-cm-t335.dts +++ b/arch/arm/boot/dts/am335x-cm-t335.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "am33xx.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "CompuLab CM-T335"; @@ -40,12 +41,51 @@ regulator-max-microvolt = <3300000>; }; + /* Regulator for WiFi */ + vwlan_fixed: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "vwlan_fixed"; + gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */ + enable-active-high; + regulator-boot-off; + }; + backlight { compatible = "pwm-backlight"; pwms = <&ecap0 0 50000 0>; brightness-levels = <0 51 53 56 62 75 101 152 255>; default-brightness-level = <8>; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "cm-t335"; + + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Line", "Line In", + "Headphone", "Headphone Jack"; + + simple-audio-card,routing = + "Headphone Jack", "LHPOUT", + "Headphone Jack", "RHPOUT", + "LLINEIN", "Line In", + "RLINEIN", "Line In", + "MICIN", "Mic Jack"; + + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + + simple-audio-card,cpu { + sound-dai = <&mcasp1>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&tlv320aic23>; + system-clock-frequency = <12000000>; + }; + }; }; &am33xx_pinmux { @@ -134,6 +174,24 @@ >; }; + dcan0_pins: pinmux_dcan0_pins { + pinctrl-single,pins = < + /* uart1_ctsn.dcan0_tx */ + AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2) + /* uart1_rtsn.dcan0_rx */ + AM33XX_IOPAD(0x97C, PIN_INPUT | MUX_MODE2) + >; + }; + + dcan1_pins: pinmux_dcan1_pins { + pinctrl-single,pins = < + /* uart1_rxd.dcan1_tx */ + AM33XX_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2) + /* uart1_txd.dcan1_rx */ + AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE2) + >; + }; + ecap0_pins: pinmux_ecap0_pins { pinctrl-single,pins = < /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ @@ -223,6 +281,21 @@ >; }; + spi0_pins: pinmux_spi0_pins { + pinctrl-single,pins = < + /* spi0_sclk.spi0_sclk */ + AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE0) + /* spi0_d0.spi0_d0 */ + AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0) + /* spi0_d1.spi0_d1 */ + AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE0) + /* spi0_cs0.spi0_cs0 */ + AM33XX_IOPAD(0x95C, PIN_OUTPUT | MUX_MODE0) + /* spi0_cs1.spi0_cs1 */ + AM33XX_IOPAD(0x960, PIN_OUTPUT | MUX_MODE0) + >; + }; + /* wl1271 bluetooth */ bluetooth_pins: pinmux_bluetooth_pins { pinctrl-single,pins = < @@ -230,6 +303,30 @@ AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE7) >; }; + + /* TLV320AIC23B codec */ + mcasp1_pins: pinmux_mcasp1_pins { + pinctrl-single,pins = < + /* MII1_CRS.mcasp1_aclkx */ + AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) + /* MII1_RX_ER.mcasp1_fsx */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) + /* MII1_COL.mcasp1_axr2 */ + AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE4) + /* RMII1_REF_CLK.mcasp1_axr3 */ + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) + >; + }; + + /* wl1271 WiFi */ + wifi_pins: pinmux_wifi_pins { + pinctrl-single,pins = < + /* EMU1.gpio3_8 - WiFi IRQ */ + AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7) + /* XDMA_EVENT_INTR1.gpio0_20 - WiFi enable */ + AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7) + >; + }; }; &uart0 { @@ -264,6 +361,13 @@ status = "okay"; compatible = "emmicro,em3027"; reg = <0x56>; }; + /* Audio codec */ + tlv320aic23: codec@1a { + compatible = "ti,tlv320aic23"; + reg = <0x1a>; + #sound-dai-cells= <0>; + status = "okay"; + }; }; &usb { @@ -302,7 +406,11 @@ status = "okay"; pinctrl-0 = <&nandflash_pins>; ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ nand@0,0 { - reg = <0 0 0>; /* CS0, offset 0 */ + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <8>; @@ -321,12 +429,9 @@ status = "okay"; gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; /* MTD partition table */ @@ -394,3 +499,70 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; }; + +&dcan0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dcan0_pins>; +}; + +&dcan1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; +}; + +/* Touschscreen and analog digital converter */ +&tscadc { + status = "okay"; + tsc { + ti,wires = <4>; + ti,x-plate-resistance = <200>; + ti,coordinate-readouts = <5>; + ti,wire-config = <0x01 0x10 0x23 0x32>; + ti,charge-delay = <0x400>; + }; + + adc { + ti,adc-channels = <4 5 6 7>; + }; +}; + +/* CPU audio */ +&mcasp1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp1_pins>; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 16 serializers */ + num-serializer = <16>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 2 1 0 0 0 0 0 0 0 0 0 0 0 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; + + #sound-dai-cells= <0>; + status = "okay"; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + ti,pindir-d0-out-d1-in = <1>; + /* WLS1271 WiFi */ + wlcore: wlcore@1 { + compatible = "ti,wl1271"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_pins>; + reg = <1>; + spi-max-frequency = <48000000>; + clock-xtal; + ref-clock-frequency = <38400000>; + interrupt-parent = <&gpio3>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + vwlan-supply = <&vwlan_fixed>; + }; +}; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 0d6a68ce434a..28b916210271 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -519,7 +519,11 @@ pinctrl-0 = <&nandflash_pins_s0>; ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <8>; @@ -538,12 +542,9 @@ gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; /* MTD partition table */ diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 54f113546ecc..6c3a9bf3638a 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -11,6 +11,7 @@ /dts-v1/; #include "am33xx.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { cpus { @@ -129,7 +130,11 @@ ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <8>; ti,nand-ecc-opt = "bch8"; gpmc,device-width = <1>; @@ -147,12 +152,9 @@ gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index c20ae6c6f6c7..d4b7f3bd553f 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -8,6 +8,7 @@ */ #include "am33xx.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Phytec AM335x phyCORE"; @@ -165,7 +166,11 @@ pinctrl-0 = <&nandflash_pins>; ranges = <0 0 0x08000000 0x1000000>; /* CS0: NAND */ nandflash: nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <8>; ti,nand-ecc-opt = "bch8"; gpmc,device-nand = "true"; @@ -184,13 +189,10 @@ gpmc,access-ns = <30>; gpmc,rd-cycle-ns = <30>; gpmc,wr-cycle-ns = <30>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <50>; gpmc,cycle2cycle-diffcsen; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <30>; gpmc,wr-data-mux-bus-ns = <0>; diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index 3303c281697b..a6efbe6eda3b 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -19,6 +19,10 @@ }; }; + chosen { + stdout-path = &uart0; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -63,12 +67,28 @@ default-brightness-level = <6>; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + /* audio external oscillator */ + tlv320aic3x_mclk: oscillator@0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; /* 24.576MHz */ + }; + }; + sound { compatible = "ti,da830-evm-audio"; ti,model = "AM335x-SL50"; ti,audio-codec = <&audio_codec>; ti,mcasp-controller = <&mcasp0>; - ti,codec-clock-rate = <12000000>; + + clocks = <&tlv320aic3x_mclk>; + clock-names = "mclk"; + ti,audio-routing = "Headphone Jack", "HPLOUT", "Headphone Jack", "HPROUT", @@ -226,7 +246,7 @@ AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */ - AM33XX_IOPAD(0x99c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ + AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */ >; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 1fafaad516ba..55ca9c7dcf6a 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -866,6 +866,8 @@ gpmc,num-waitpins = <2>; #address-cells = <2>; #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 92068fbf8b57..6e4f5af3d8f8 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -894,21 +894,11 @@ gpmc,num-waitpins = <2>; #address-cells = <2>; #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; status = "disabled"; }; - am43xx_control_usb2phy1: control-phy@44e10620 { - compatible = "ti,control-phy-usb2-am437"; - reg = <0x44e10620 0x4>; - reg-names = "power"; - }; - - am43xx_control_usb2phy2: control-phy@0x44e10628 { - compatible = "ti,control-phy-usb2-am437"; - reg = <0x44e10628 0x4>; - reg-names = "power"; - }; - ocp2scp0: ocp2scp@483a8000 { compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp"; #address-cells = <1>; @@ -919,7 +909,7 @@ usb2_phy1: phy@483a8000 { compatible = "ti,am437x-usb2"; reg = <0x483a8000 0x8000>; - ctrl-module = <&am43xx_control_usb2phy1>; + syscon-phy-power = <&scm_conf 0x620>; clocks = <&usb_phy0_always_on_clk32k>, <&usb_otg_ss0_refclk960m>; clock-names = "wkupclk", "refclk"; @@ -938,7 +928,7 @@ usb2_phy2: phy@483e8000 { compatible = "ti,am437x-usb2"; reg = <0x483e8000 0x8000>; - ctrl-module = <&am43xx_control_usb2phy2>; + syscon-phy-power = <&scm_conf 0x628>; clocks = <&usb_phy1_always_on_clk32k>, <&usb_otg_ss1_refclk960m>; clock-names = "wkupclk", "refclk"; diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts index 8677f4cce9e9..9551c4713173 100644 --- a/arch/arm/boot/dts/am437x-cm-t43.dts +++ b/arch/arm/boot/dts/am437x-cm-t43.dts @@ -146,7 +146,11 @@ pinctrl-0 = <&nand_flash_x8>; ranges = <0 0 0x08000000 0x1000000>; nand@0,0 { - reg = <0 0 0>; + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; @@ -166,17 +170,12 @@ gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; - gpmc,wait-pin = <0>; - #address-cells = <1>; #size-cells = <1>; /* MTD partition table */ diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index ecd09ab6d581..8889be1ca1c3 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -810,9 +810,13 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&nand_flash_x8>; - ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ + ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* device IO registers */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "bch16"; ti,elm-id = <&elm>; nand-bus-width = <8>; @@ -831,11 +835,9 @@ gpmc,access-ns = <30>; gpmc,rd-cycle-ns = <40>; gpmc,wr-cycle-ns = <40>; - gpmc,wait-pin = <0>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; /* MTD partition table */ diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index d580e2b70f9a..83dfafaaba1b 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -18,7 +18,7 @@ / { model = "TI AM43x EPOS EVM"; - compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43"; + compatible = "ti,am43x-epos-evm","ti,am438x","ti,am43"; aliases { display0 = &lcd0; @@ -561,9 +561,13 @@ status = "okay"; /* Disable QSPI when enabling GPMC (NAND) */ pinctrl-names = "default"; pinctrl-0 = <&nand_flash_x8>; - ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */ + ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "bch16"; ti,elm-id = <&elm>; nand-bus-width = <8>; @@ -582,11 +586,9 @@ gpmc,access-ns = <30>; /* tCEA + 4*/ gpmc,rd-cycle-ns = <40>; gpmc,wr-cycle-ns = <40>; - gpmc,wait-pin = <0>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; /* MTD partition table */ diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index a0986c65be0c..0a5fc5d02ce2 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -24,7 +24,7 @@ memory { device_type = "memory"; - reg = <0x80000000 0x80000000>; + reg = <0x0 0x80000000 0x0 0x80000000>; }; vdd_3v3: fixedregulator-vdd_3v3 { @@ -562,8 +562,7 @@ extcon_usb2: tps659038_usb { compatible = "ti,palmas-usb-vid"; ti,enable-vbus-detection; - ti,enable-id-detection; - id-gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>; + vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; }; }; @@ -593,6 +592,11 @@ DRVDD-supply = <&vdd_3v3>; DVDD-supply = <&aic_dvdd>; }; + + eeprom: eeprom@50 { + compatible = "at,24c32"; + reg = <0x50>; + }; }; &i2c3 { diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index 1c06cb76da07..14f912a1b4fd 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -21,7 +21,7 @@ memory { device_type = "memory"; - reg = <0x80000000 0x20000000>; /* 512 MB - minimal configuration */ + reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */ }; leds { diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index 1bc64cda819e..652d85b28aaa 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -53,6 +53,14 @@ regulator-boot-on; }; + veth: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "veth"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + xtal24mhz: xtal24mhz@24M { #clock-cells = <0>; compatible = "fixed-clock"; @@ -106,6 +114,53 @@ clock-frequency = <0>; }; + flash@30000000 { + compatible = "arm,versatile-flash", "cfi-flash"; + reg = <0x30000000 0x4000000>; + bank-width = <4>; + }; + + fpga_flash@38000000 { + compatible = "arm,versatile-flash", "cfi-flash"; + reg = <0x38000000 0x800000>; + bank-width = <4>; + }; + + /* + * The "secure flash" contains things like the boot + * monitor so we don't want people to accidentally + * screw this up. Mark the device tree node disabled + * by default. + */ + secflash@3c000000 { + compatible = "arm,versatile-flash", "cfi-flash"; + reg = <0x3c000000 0x4000000>; + bank-width = <4>; + status = "disabled"; + }; + + /* SMSC 9118 ethernet with PHY and EEPROM */ + ethernet@3a000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <0x3a000000 0x10000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vdd33a-supply = <&veth>; + vddvario-supply = <&veth>; + }; + + usb@3b000000 { + compatible = "nxp,usb-isp1761"; + reg = <0x3b000000 0x20000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + port1-otg; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -176,6 +231,41 @@ label = "versatile:7"; default-state = "off"; }; + oscclk0: osc0@0c { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x0C>; + clocks = <&xtal24mhz>; + }; + oscclk1: osc1@10 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x10>; + clocks = <&xtal24mhz>; + }; + oscclk2: osc2@14 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x14>; + clocks = <&xtal24mhz>; + }; + oscclk3: osc3@18 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x18>; + clocks = <&xtal24mhz>; + }; + oscclk4: osc4@1c { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x1c>; + clocks = <&xtal24mhz>; + }; }; /* Primary DevChip GIC synthesized with the CPU */ @@ -297,6 +387,13 @@ clocks = <&uartclk>, <&pclk>; clock-names = "uartclk", "apb_pclk"; }; + + /* Direct-mapped development chip ROM */ + pb1176_rom@10200000 { + compatible = "direct-mapped"; + reg = <0x10200000 0x4000>; + bank-width = <1>; + }; }; /* These peripherals are inside the FPGA rather than the DevChip */ @@ -306,6 +403,27 @@ compatible = "simple-bus"; ranges; + i2c0: i2c@10002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "arm,versatile-i2c"; + reg = <0x10002000 0x1000>; + + rtc@68 { + compatible = "dallas,ds1338"; + reg = <0x68>; + }; + }; + + fpga_aaci: aaci@10004000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x10004000 0x1000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + fpga_mci: mmcsd@10005000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x10005000 0x1000>; diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts index da755c9851a7..63d6a051839f 100644 --- a/arch/arm/boot/dts/arm-realview-pb11mp.dts +++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts @@ -230,14 +230,14 @@ flash0@40000000 { /* 2 * 32MiB NOR Flash memory */ - compatible = "arm,vexpress-flash", "cfi-flash"; + compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x40000000 0x04000000>; bank-width = <4>; }; flash1@44000000 { // 2 * 32MiB NOR Flash memory - compatible = "arm,vexpress-flash", "cfi-flash"; + compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x44000000 0x04000000>; bank-width = <4>; }; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index bb280de511da..2364fc56ae13 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -168,6 +168,33 @@ spi-max-frequency = <50000000>; }; }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x800000>; + }; + partition@800000 { + label = "Linux"; + reg = <0x800000 0x800000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; + }; }; pcie-controller { diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 3aa980ad64f0..d5e19cd4d256 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -200,7 +200,7 @@ &pinctrl { pwr_led_pin: pwr-led-pin { marvell,pins = "mpp63"; - marvell,function = "gpo"; + marvell,function = "gpio"; }; stat_led_pins: stat-led-pins { diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index faa474874cb8..11565752b9f6 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -297,7 +297,7 @@ backup_led_pin: backup-led-pin { marvell,pins = "mpp63"; - marvell,function = "gpo"; + marvell,function = "gpio"; }; power_led_pin: power-led-pin { diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts index 836bcc07afc5..8ca7a4340c0f 100644 --- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -339,7 +339,7 @@ fan_ctrl_high_pin: fan-ctrl-high-pin { marvell,pins = "mpp63"; - marvell,function = "gpo"; + marvell,function = "gpio"; }; fan_alarm_pin: fan-alarm-pin { diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index 7ccce7529b0c..cc952cf8ec30 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -529,7 +529,7 @@ }; sata@a0000 { - compatible = "marvell,orion-sata"; + compatible = "marvell,armada-370-sata"; reg = <0xa0000 0x5000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gateclk 14>, <&gateclk 20>; diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index acd5b1519edb..2d3fd6e76e2c 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -61,7 +61,8 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { spi1: spi@10680 { @@ -134,18 +135,27 @@ }; }; + /* CON3 */ ethernet@30000 { status = "okay"; phy = <&phy2>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <1>; + bm,pool-short = <3>; }; + /* CON2 */ ethernet@34000 { status = "okay"; phy = <&phy1>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <3>; }; + /* CON4 */ ethernet@70000 { pinctrl-names = "default"; @@ -157,6 +167,13 @@ status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <3>; + }; + + bm@c8000 { + status = "okay"; }; nfc: flash@d0000 { @@ -178,6 +195,10 @@ }; }; + bm-bppi { + status = "okay"; + }; + pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts index c6e180eb3b11..c60206efb583 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -78,6 +78,9 @@ internal-regs { ethernet@30000 { phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <1>; status = "okay"; fixed-link { @@ -88,6 +91,9 @@ ethernet@34000 { phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <3>; + bm,pool-short = <1>; status = "okay"; fixed-link { diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index ff47af57f091..ea93ed727030 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -66,7 +66,8 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { spi@10600 { @@ -99,6 +100,9 @@ status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <3>; }; usb@58000 { @@ -109,6 +113,9 @@ status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; }; mdio@72004 { @@ -129,6 +136,10 @@ status = "okay"; }; + bm@c8000 { + status = "okay"; + }; + flash@d0000 { status = "okay"; num-cs = <1>; @@ -169,6 +180,10 @@ }; }; + bm-bppi { + status = "okay"; + }; + pcie-controller { status = "okay"; /* diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index cd316021d6ce..fd75e5e9550f 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -44,8 +44,8 @@ #include <dt-bindings/gpio/gpio.h> / { - model = "Marvell Armada 385 GP"; - compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380"; + model = "Marvell Armada 388 DB-88F6820-GP"; + compatible = "marvell,a388-gp", "marvell,armada388", "marvell,armada380"; chosen { stdout-path = "serial0:115200n8"; @@ -60,7 +60,8 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { spi@10600 { @@ -133,6 +134,9 @@ status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <3>; }; /* CON4 */ @@ -152,6 +156,9 @@ status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; }; @@ -186,6 +193,10 @@ }; }; + bm@c8000 { + status = "okay"; + }; + sata@e0000 { pinctrl-names = "default"; pinctrl-0 = <&sata2_pins>, <&sata3_pins>; @@ -229,17 +240,21 @@ /* CON5 */ usb3@f0000 { - vcc-supply = <®_usb2_1_vbus>; + usb-phy = <&usb2_1_phy>; status = "okay"; }; /* CON7 */ usb3@f8000 { - vcc-supply = <®_usb3_vbus>; + usb-phy = <&usb3_phy>; status = "okay"; }; }; + bm-bppi { + status = "okay"; + }; + pcie-controller { status = "okay"; /* @@ -273,13 +288,22 @@ }; }; + usb2_1_phy: usb2_1_phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_usb2_1_vbus>; + }; + + usb3_phy: usb3_phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_usb3_vbus>; + }; + reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; regulator-name = "usb3-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - regulator-always-on; gpio = <&expander1 15 GPIO_ACTIVE_HIGH>; }; @@ -299,7 +323,6 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - regulator-always-on; gpio = <&expander0 4 GPIO_ACTIVE_HIGH>; }; @@ -309,7 +332,7 @@ regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; enable-active-high; - regulator-always-on; + regulator-boot-on; gpio = <&expander0 2 GPIO_ACTIVE_HIGH>; }; @@ -318,7 +341,6 @@ regulator-name = "v5.0-sata0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - regulator-always-on; vin-supply = <®_sata0>; }; @@ -327,7 +349,6 @@ regulator-name = "v12.0-sata0"; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; - regulator-always-on; vin-supply = <®_sata0>; }; @@ -337,7 +358,7 @@ regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; enable-active-high; - regulator-always-on; + regulator-boot-on; gpio = <&expander0 3 GPIO_ACTIVE_HIGH>; }; @@ -346,7 +367,6 @@ regulator-name = "v5.0-sata1"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - regulator-always-on; vin-supply = <®_sata1>; }; @@ -355,7 +375,6 @@ regulator-name = "v12.0-sata1"; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; - regulator-always-on; vin-supply = <®_sata1>; }; @@ -363,7 +382,7 @@ compatible = "regulator-fixed"; regulator-name = "pwr_en_sata2"; enable-active-high; - regulator-always-on; + regulator-boot-on; gpio = <&expander0 11 GPIO_ACTIVE_HIGH>; }; @@ -372,7 +391,6 @@ regulator-name = "v5.0-sata2"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - regulator-always-on; vin-supply = <®_sata2>; }; @@ -381,7 +399,6 @@ regulator-name = "v12.0-sata2"; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; - regulator-always-on; vin-supply = <®_sata2>; }; @@ -389,7 +406,7 @@ compatible = "regulator-fixed"; regulator-name = "pwr_en_sata3"; enable-active-high; - regulator-always-on; + regulator-boot-on; gpio = <&expander0 12 GPIO_ACTIVE_HIGH>; }; @@ -398,7 +415,6 @@ regulator-name = "v5.0-sata3"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - regulator-always-on; vin-supply = <®_sata3>; }; @@ -407,7 +423,6 @@ regulator-name = "v12.0-sata3"; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; - regulator-always-on; vin-supply = <®_sata3>; }; }; diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi index 3f792a563c05..8c9842237b60 100644 --- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi +++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi @@ -58,7 +58,8 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { ethernet@70000 { @@ -66,6 +67,9 @@ pinctrl-names = "default"; phy = <&phy_dedicated>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; status = "okay"; }; @@ -110,6 +114,15 @@ pinctrl-names = "default"; status = "okay"; }; + + bm@c8000 { + status = "okay"; + }; }; + + bm-bppi { + status = "okay"; + }; + }; }; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index e8b7f6726772..3312be6c82cc 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -429,6 +429,27 @@ reg = <0x22000 0x1000>; }; + /* + * As a special exception to the "order by + * register address" rule, the eth0 node is + * placed here to ensure that it gets + * registered as the first interface, since + * the network subsystem doesn't allow naming + * interfaces using DT aliases. Without this, + * the ordering of interfaces is different + * from the one used in U-Boot and the + * labeling of interfaces on the boards, which + * is very confusing for users. + */ + eth0: ethernet@70000 { + compatible = "marvell,armada-370-neta"; + reg = <0x70000 0x4000>; + interrupts-extended = <&mpic 8>; + clocks = <&gateclk 4>; + tx-csum-limit = <9800>; + status = "disabled"; + }; + eth1: ethernet@30000 { compatible = "marvell,armada-370-neta"; reg = <0x30000 0x4000>; @@ -493,15 +514,6 @@ }; }; - eth0: ethernet@70000 { - compatible = "marvell,armada-370-neta"; - reg = <0x70000 0x4000>; - interrupts-extended = <&mpic 8>; - clocks = <&gateclk 4>; - tx-csum-limit = <9800>; - status = "disabled"; - }; - mdio: mdio@72004 { #address-cells = <1>; #size-cells = <0>; @@ -540,6 +552,14 @@ status = "disabled"; }; + bm: bm@c8000 { + compatible = "marvell,armada-380-neta-bm"; + reg = <0xc8000 0xac>; + clocks = <&gateclk 13>; + internal-mem = <&bm_bppi>; + status = "disabled"; + }; + sata@e0000 { compatible = "marvell,armada-380-ahci"; reg = <0xe0000 0x2000>; @@ -618,6 +638,17 @@ #size-cells = <1>; ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>; }; + + bm_bppi: bm-bppi { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>; + ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gateclk 13>; + no-memory-wc; + status = "disabled"; + }; }; clocks { diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index ebe1d267406d..62422a90aeb2 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -77,7 +77,8 @@ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000 MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>; devbus-bootcs { status = "okay"; @@ -181,21 +182,33 @@ status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; }; ethernet@74000 { status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <1>; }; ethernet@30000 { status = "okay"; phy = <&phy2>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; }; ethernet@34000 { status = "okay"; phy = <&phy3>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <3>; + }; + + bm@c0000 { + status = "okay"; }; mvsdio@d4000 { @@ -229,6 +242,38 @@ spi-max-frequency = <20000000>; }; }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x800000>; + }; + partition@800000 { + label = "Linux"; + reg = <0x800000 0x800000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + + }; + }; + }; + }; + + bm-bppi { + status = "okay"; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 5730b875c4f5..061f4237760e 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -96,7 +96,8 @@ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000 MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>; devbus-bootcs { status = "okay"; @@ -196,21 +197,29 @@ status = "okay"; phy = <&phy0>; phy-mode = "qsgmii"; + buffer-manager = <&bm>; + bm,pool-long = <0>; }; ethernet@74000 { status = "okay"; phy = <&phy1>; phy-mode = "qsgmii"; + buffer-manager = <&bm>; + bm,pool-long = <1>; }; ethernet@30000 { status = "okay"; phy = <&phy2>; phy-mode = "qsgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; }; ethernet@34000 { status = "okay"; phy = <&phy3>; phy-mode = "qsgmii"; + buffer-manager = <&bm>; + bm,pool-long = <3>; }; /* Front-side USB slot */ @@ -235,6 +244,10 @@ }; }; + bm@c0000 { + status = "okay"; + }; + nand@d0000 { status = "okay"; num-cs = <1>; @@ -243,5 +256,9 @@ nand-on-flash-bbt; }; }; + + bm-bppi { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 853bd392a4fe..ed3b889d16ce 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -67,7 +67,8 @@ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 MBUS_ID(0x01, 0x2f) 0 0 0xe8000000 0x8000000 MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0 0xd1200000 0x100000>; devbus-bootcs { status = "okay"; @@ -176,21 +177,29 @@ status = "okay"; phy = <&phy0>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <0>; }; ethernet@74000 { status = "okay"; phy = <&phy1>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <1>; }; ethernet@30000 { status = "okay"; phy = <&phy2>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; }; ethernet@34000 { status = "okay"; phy = <&phy3>; phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <3>; }; i2c@11000 { status = "okay"; @@ -219,6 +228,14 @@ usb@51000 { status = "okay"; }; + + bm@c0000 { + status = "okay"; + }; + }; + + bm-bppi { + status = "okay"; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index be23196829bb..553349c07f28 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -253,6 +253,14 @@ marvell,crypto-sram-size = <0x800>; }; + bm: bm@c0000 { + compatible = "marvell,armada-380-neta-bm"; + reg = <0xc0000 0xac>; + clocks = <&gateclk 13>; + internal-mem = <&bm_bppi>; + status = "disabled"; + }; + xor@f0900 { compatible = "marvell,orion-xor"; reg = <0xF0900 0x100 @@ -291,6 +299,17 @@ #size-cells = <1>; ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>; }; + + bm_bppi: bm-bppi { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>; + ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gateclk 13>; + no-memory-wc; + status = "disabled"; + }; }; clocks { diff --git a/arch/arm/boot/dts/artpec6-devboard.dts b/arch/arm/boot/dts/artpec6-devboard.dts new file mode 100644 index 000000000000..f823ed382ac7 --- /dev/null +++ b/arch/arm/boot/dts/artpec6-devboard.dts @@ -0,0 +1,64 @@ +/* + * Axis ARTPEC-6 development board. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "artpec6.dtsi" + +/ { + model = "ARTPEC-6 development board"; + compatible = "axis,artpec6-dev-board", "axis,artpec6"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial3:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +ðernet { + status = "okay"; + + phy-handle = <&phy1>; + phy-mode = "gmii"; + + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + phy1: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + device_type = "ethernet-phy"; + reg = <0x0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi new file mode 100644 index 000000000000..30430162b886 --- /dev/null +++ b/arch/arm/boot/dts/artpec6.dtsi @@ -0,0 +1,270 @@ +/* + * Device Tree Source for the Axis ARTPEC-6 SoC + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "skeleton.dtsi" + +/ { + compatible = "axis,artpec6"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + next-level-cache = <&pl310>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + next-level-cache = <&pl310>; + }; + }; + + syscon { + compatible = "axis,artpec6-syscon", "syscon"; + reg = <0xf8000000 0x48>; + }; + + psci { + compatible = "arm,psci-0.2", "arm,psci"; + method = "smc"; + psci_version = <0x84000000>; + cpu_on = <0x84000003>; + system_reset = <0x84000009>; + }; + + scu@faf00000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xfaf00000 0x58>; + }; + + /* Main external clock driving CPU and peripherals */ + ext_clk: ext_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + + /* PLL1 is used by CPU and some peripherals */ + pll1_clk: pll1_clk@f8000000 { + #clock-cells = <0>; + compatible = "axis,artpec6-pll1-clock"; + reg = <0xf8000000 4>; + clocks = <&ext_clk>; + }; + + cpu_clk: cpu_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&pll1_clk>; + clock-output-names = "cpu_clk"; + }; + + cpu_clkdiv2: cpu_clkdiv2 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <2>; + clock-mult = <1>; + clocks = <&cpu_clk>; + }; + + cpu_clkdiv4: cpu_clkdiv4 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <4>; + clock-mult = <1>; + clocks = <&cpu_clk>; + }; + + apb_pclk: apb_pclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <8>; + clock-mult = <1>; + clocks = <&cpu_clk>; + clock-output-names = "apb_pclk"; + }; + + /* PLL2 is used by a number of peripherals, including UDL */ + pll2: pll2 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <24>; + clocks = <&ext_clk>; + }; + + /* PLL2DIV2 is used by the Fractional Clock Divider, for i2s */ + pll2div2: pll2div2 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <2>; + clock-mult = <1>; + clocks = <&pll2>; + }; + + pll2div12: pll2div12 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <12>; + clock-mult = <1>; + clocks = <&pll2>; + }; + + pll2div24: pll2div24 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <24>; + clock-mult = <1>; + clocks = <&pll2>; + clock-output-names = "uart_clk"; + }; + + + gtimer@faf00200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0xfaf00200 0x20>; + interrupts = <GIC_PPI 11 0xf01>; + clocks = <&cpu_clkdiv2>; + }; + + timer@faf00600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xfaf00600 0x20>; + interrupts = <GIC_PPI 13 0xf04>; + clocks = <&cpu_clkdiv2>; + status = "disabled"; + }; + + intc: interrupt-controller@faf01000 { + interrupt-controller; + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + reg = < 0xfaf01000 0x1000 >, < 0xfaf00100 0x0100 >; + }; + + pl310: cache-controller@faf10000 { + compatible = "arm,pl310-cache"; + cache-unified; + cache-level = <2>; + reg = <0xfaf10000 0x1000>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + arm,data-latency = <1 1 1>; + arm,tag-latency = <1 1 1>; + arm,filter-ranges = <0x0 0x80000000>; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; + }; + + amba@0 { + compatible = "simple-bus"; + #address-cells = <0x1>; + #size-cells = <0x1>; + interrupt-parent = <&intc>; + ranges; + dma-ranges = <0x80000000 0x00000000 0x40000000>; + dma-coherent; + + ethernet: ethernet@f8010000 { + clock-names = "phy_ref_clk", "apb_pclk"; + clocks = <&ext_clk>, <&apb_pclk>; + compatible = "snps,dwc-qos-ethernet-4.10"; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf8010000 0x4000>; + + snps,write-requests = <2>; + snps,read-requests = <16>; + snps,txpbl = <8>; + snps,rxpbl = <2>; + + status = "disabled"; + }; + + uart0: serial@f8036000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xf8036000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pll2div24>, <&apb_pclk>; + clock-names = "uart_clk", "apb_pclk"; + status = "disabled"; + }; + uart1: serial@f8037000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xf8037000 0x1000>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pll2div24>, <&apb_pclk>; + clock-names = "uart_clk", "apb_pclk"; + status = "disabled"; + }; + uart2: serial@f8038000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xf8038000 0x1000>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pll2div24>, <&apb_pclk>; + clock-names = "uart_clk", "apb_pclk"; + status = "disabled"; + }; + uart3: serial@f8039000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xf8039000 0x1000>; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pll2div24>, <&apb_pclk>; + clock-names = "uart_clk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index e683856c507c..21c780fab761 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -46,6 +46,7 @@ #include "sama5d2.dtsi" #include "sama5d2-pinfunc.h" #include <dt-bindings/mfd/atmel-flexcom.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel SAMA5D2 Xplained"; @@ -71,11 +72,20 @@ ahb { usb0: gadget@00300000 { + atmel,vbus-gpio = <&pioA 31 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; usb1: ohci@00400000 { num-ports = <3>; + atmel,vbus-gpio = <0 /* &pioA 41 GPIO_ACTIVE_HIGH */ + &pioA 42 GPIO_ACTIVE_HIGH + 0 + >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; status = "okay"; }; @@ -267,7 +277,29 @@ }; }; + adc: adc@fc030000 { + vddana-supply = <&vdd_3v3_lp_reg>; + vref-supply = <&vdd_3v3_lp_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc_default>; + status = "okay"; + }; + pinctrl@fc038000 { + /* + * There is no real pinmux for ADC, if the pin + * is not requested by another peripheral then + * the muxing is done when channel is enabled. + * Requesting pins for ADC is GPIO is + * encouraged to prevent conflicts and to + * disable bias in order to be in the same + * state when the pin is not muxed to the adc. + */ + pinctrl_adc_default: adc_default { + pinmux = <PIN_PD23__GPIO>; + bias-disable; + }; + pinctrl_flx0_default: flx0_default { pinmux = <PIN_PB28__FLEXCOM0_IO0>, <PIN_PB29__FLEXCOM0_IO1>; @@ -292,6 +324,18 @@ bias-disable; }; + pinctrl_key_gpio_default: key_gpio_default { + pinmux = <PIN_PB9__GPIO>; + bias-pull-up; + }; + + pinctrl_led_gpio_default: led_gpio_default { + pinmux = <PIN_PB0__GPIO>, + <PIN_PB5__GPIO>, + <PIN_PB6__GPIO>; + bias-pull-up; + }; + pinctrl_macb0_default: macb0_default { pinmux = <PIN_PB14__GTXCK>, <PIN_PB15__GTXEN>, @@ -308,6 +352,7 @@ pinctrl_macb0_phy_irq: macb0_phy_irq { pinmux = <PIN_PC9__GPIO>; + bias-disable; }; pinctrl_pdmic_default: pdmic_default { @@ -375,7 +420,54 @@ <PIN_PB12__UTXD3>; bias-disable; }; + + pinctrl_usb_default: usb_default { + pinmux = <PIN_PB10__GPIO>; + bias-disable; + }; + + pinctrl_usba_vbus: usba_vbus { + pinmux = <PIN_PA31__GPIO>; + bias-disable; + }; + }; }; }; + + gpio_keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio_default>; + + bp1 { + label = "PB_USER"; + gpios = <&pioA 41 GPIO_ACTIVE_LOW>; + linux,code = <0x104>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_gpio_default>; + status = "okay"; + + red { + label = "red"; + gpios = <&pioA 38 GPIO_ACTIVE_LOW>; + }; + + green { + label = "green"; + gpios = <&pioA 37 GPIO_ACTIVE_LOW>; + }; + + blue { + label = "blue"; + gpios = <&pioA 32 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; }; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index ff888d21c786..f3e2b96c06a3 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -303,6 +303,7 @@ regulator-name = "mmc0-card-supply"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; gpio_keys { diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 569026e8f96c..da84e65b56ef 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -268,5 +268,6 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vcc_3v3_reg>; + regulator-always-on; }; }; diff --git a/arch/arm/boot/dts/axm55xx.dtsi b/arch/arm/boot/dts/axm55xx.dtsi index ea288f0a1d39..a9d6d593fc8a 100644 --- a/arch/arm/boot/dts/axm55xx.dtsi +++ b/arch/arm/boot/dts/axm55xx.dtsi @@ -107,7 +107,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges; diff --git a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi index 32bcd45ef22b..80b6ba4ca50c 100644 --- a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi @@ -121,4 +121,13 @@ clocks { clocks = <&osc>; clock-output-names = "keypad", "adc/touch", "pwm"; }; + + audiopll: audiopll { + #clock-cells = <1>; + compatible = "brcm,cygnus-audiopll"; + reg = <0x180aeb00 0x68>; + clocks = <&osc>; + clock-output-names = "audiopll", "ch0_audio", + "ch1_audio", "ch2_audio"; + }; }; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 10bdef557ba0..def9e783b5c6 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -45,14 +45,14 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x0>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; @@ -62,24 +62,19 @@ }; }; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; + mpcore { compatible = "simple-bus"; ranges = <0x00000000 0x19000000 0x00023000>; #address-cells = <1>; #size-cells = <1>; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - next-level-cache = <&L2>; - reg = <0x0>; - }; - }; - a9pll: arm_clk@00000 { #clock-cells = <0>; compatible = "brcm,nsp-armpll"; @@ -169,6 +164,18 @@ #address-cells = <1>; #size-cells = <1>; + gpioa: gpio@0020 { + compatible = "brcm,nsp-gpio-a"; + reg = <0x0020 0x70>, + <0x3f1c4 0x1c>; + #gpio-cells = <2>; + gpio-controller; + ngpios = <32>; + interrupt-controller; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 0 32>; + }; + uart0: serial@0300 { compatible = "ns16550a"; reg = <0x0300 0x100>; @@ -185,78 +192,6 @@ status = "disabled"; }; - pcie0: pcie@12000 { - compatible = "brcm,iproc-pcie"; - reg = <0x12000 0x1000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>; - - linux,pci-domain = <0>; - - bus-range = <0x00 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - - /* Note: The HW does not support I/O resources. So, - * only the memory resource range is being specified. - */ - ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>; - - status = "disabled"; - }; - - pcie1: pcie@13000 { - compatible = "brcm,iproc-pcie"; - reg = <0x13000 0x1000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>; - - linux,pci-domain = <1>; - - bus-range = <0x00 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - - /* Note: The HW does not support I/O resources. So, - * only the memory resource range is being specified. - */ - ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>; - - status = "disabled"; - }; - - pcie2: pcie@14000 { - compatible = "brcm,iproc-pcie"; - reg = <0x14000 0x1000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>; - - linux,pci-domain = <2>; - - bus-range = <0x00 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - - /* Note: The HW does not support I/O resources. So, - * only the memory resource range is being specified. - */ - ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>; - - status = "disabled"; - }; - nand: nand@26000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x026000 0x600>, @@ -271,6 +206,24 @@ brcm,nand-has-wp; }; + ccbtimer0: timer@34000 { + compatible = "arm,sp804"; + reg = <0x34000 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>; + clock-names = "apb_pclk"; + }; + + ccbtimer1: timer@35000 { + compatible = "arm,sp804"; + reg = <0x35000 0x1000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>; + clock-names = "apb_pclk"; + }; + i2c0: i2c@38000 { compatible = "brcm,iproc-i2c"; reg = <0x38000 0x50>; @@ -280,6 +233,14 @@ clock-frequency = <100000>; }; + watchdog@39000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x39000 0x1000>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>, <&iprocslow>; + clock-names = "wdogclk", "apb_pclk"; + }; + lcpll0: lcpll0@3f100 { #clock-cells = <1>; compatible = "brcm,nsp-lcpll0"; @@ -306,4 +267,76 @@ <0x3f408 0x04>; }; }; + + pcie0: pcie@18012000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18012000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>; + + linux,pci-domain = <0>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>; + + status = "disabled"; + }; + + pcie1: pcie@18013000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18013000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>; + + linux,pci-domain = <1>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>; + + status = "disabled"; + }; + + pcie2: pcie@18014000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18014000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>; + + linux,pci-domain = <2>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>; + + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts new file mode 100644 index 000000000000..ddbbbbd42dda --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts @@ -0,0 +1,24 @@ +/dts-v1/; +#include "bcm2835.dtsi" +#include "bcm2835-rpi.dtsi" + +/ { + compatible = "raspberrypi,model-a", "brcm,bcm2835"; + model = "Raspberry Pi Model A"; + + leds { + act { + gpios = <&gpio 16 1>; + }; + }; +}; + +&gpio { + pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>; + + /* I2S interface */ + i2s_alt2: i2s_alt2 { + brcm,pins = <28 29 30 31>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index 3afb9fefe2d1..76bdbcafab18 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -1,3 +1,5 @@ +#include <dt-bindings/power/raspberrypi-power.h> + / { memory { reg = <0 0x10000000>; @@ -18,6 +20,12 @@ compatible = "raspberrypi,bcm2835-firmware"; mboxes = <&mailbox>; }; + + power: power { + compatible = "raspberrypi,bcm2835-power"; + firmware = <&firmware>; + #power-domain-cells = <1>; + }; }; }; @@ -58,3 +66,11 @@ status = "okay"; bus-width = <4>; }; + +&pwm { + status = "okay"; +}; + +&usb { + power-domains = <&power RPI_POWER_DOMAIN_USB>; +}; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 971e741e5467..8aaf193711bf 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -1,5 +1,6 @@ #include <dt-bindings/pinctrl/bcm2835.h> #include <dt-bindings/clock/bcm2835.h> +#include <dt-bindings/clock/bcm2835-aux.h> #include "skeleton.dtsi" /* This include file covers the common peripherals and configuration between @@ -111,7 +112,7 @@ #interrupt-cells = <2>; }; - uart0: uart@7e201000 { + uart0: serial@7e201000 { compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; reg = <0x7e201000 0x1000>; interrupts = <2 25>; @@ -159,6 +160,44 @@ clocks = <&clocks BCM2835_CLOCK_VPU>; }; + uart1: serial@7e215040 { + compatible = "brcm,bcm2835-aux-uart"; + reg = <0x7e215040 0x40>; + interrupts = <1 29>; + clocks = <&aux BCM2835_AUX_CLOCK_UART>; + status = "disabled"; + }; + + spi1: spi@7e215080 { + compatible = "brcm,bcm2835-aux-spi"; + reg = <0x7e215080 0x40>; + interrupts = <1 29>; + clocks = <&aux BCM2835_AUX_CLOCK_SPI1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@7e2150c0 { + compatible = "brcm,bcm2835-aux-spi"; + reg = <0x7e2150c0 0x40>; + interrupts = <1 29>; + clocks = <&aux BCM2835_AUX_CLOCK_SPI2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pwm: pwm@7e20c000 { + compatible = "brcm,bcm2835-pwm"; + reg = <0x7e20c000 0x28>; + clocks = <&clocks BCM2835_CLOCK_PWM>; + assigned-clocks = <&clocks BCM2835_CLOCK_PWM>; + assigned-clock-rates = <10000000>; + #pwm-cells = <2>; + status = "disabled"; + }; + sdhci: sdhci@7e300000 { compatible = "brcm,bcm2835-sdhci"; reg = <0x7e300000 0x100>; @@ -187,7 +226,7 @@ status = "disabled"; }; - usb@7e980000 { + usb: usb@7e980000 { compatible = "brcm,bcm2835-usb"; reg = <0x7e980000 0x10000>; interrupts = <1 9>; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts new file mode 100644 index 000000000000..6c83538bc2d7 --- /dev/null +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -0,0 +1,111 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for D-Link DIR-885L + * + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708"; + model = "D-Link DIR-885L"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + nand: nand@18028000 { + nandcs@0 { + partition@0 { + label = "firmware"; + reg = <0x00000000 0x08000000>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + power-white { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + usb3-white { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + 2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + 5ghz { + label = "bcm53xx:white:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + /* Switch: router / extender */ + extender { + label = "Extender"; + linux,code = <BTN_0>; + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart0 { + status = "okay"; + clock-frequency = <125000000>; +}; diff --git a/arch/arm/boot/dts/cros-ec-keyboard.dtsi b/arch/arm/boot/dts/cros-ec-keyboard.dtsi index 4e42f30cb318..c0451051777e 100644 --- a/arch/arm/boot/dts/cros-ec-keyboard.dtsi +++ b/arch/arm/boot/dts/cros-ec-keyboard.dtsi @@ -55,6 +55,7 @@ MATRIX_KEY(0x03, 0x04, KEY_F5) MATRIX_KEY(0x03, 0x06, KEY_6) MATRIX_KEY(0x03, 0x08, KEY_MINUS) + MATRIX_KEY(0x03, 0x09, KEY_F13) MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH) MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN) diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts index e070862b1038..cbc17b0794b1 100644 --- a/arch/arm/boot/dts/dm8148-evm.dts +++ b/arch/arm/boot/dts/dm8148-evm.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "dm814x.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "DM8148 EVM"; @@ -35,6 +36,63 @@ phy-mode = "rgmii"; }; +&gpmc { + ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */ + + nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + linux,mtd-name= "micron,mt29f2g16aadwp"; + #address-cells = <1>; + #size-cells = <1>; + ti,nand-ecc-opt = "bch8"; + nand-bus-width = <16>; + gpmc,device-width = <2>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + partition@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + partition@0x80000 { + label = "U-Boot"; + reg = <0x80000 0x1c0000>; + }; + partition@0x1c0000 { + label = "Environment"; + reg = <0x240000 0x40000>; + }; + partition@0x280000 { + label = "Kernel"; + reg = <0x280000 0x500000>; + }; + partition@0x780000 { + label = "Filesystem"; + reg = <0x780000 0xf880000>; + }; + }; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&sd1_pins>; diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/dm814x-clocks.dtsi index 26001585673a..e0ea6a93a22e 100644 --- a/arch/arm/boot/dts/dm814x-clocks.dtsi +++ b/arch/arm/boot/dts/dm814x-clocks.dtsi @@ -41,11 +41,11 @@ reg = <0x0040>; }; - /* Optional auxosc, 20 - 30 MHz range, assume 27 MHz by default */ + /* Optional auxosc, 20 - 30 MHz range, assume 22.5729 MHz by default */ auxosc_ck: auxosc_ck { #clock-cells = <0>; compatible = "fixed-clock"; - clock-frequency = <27000000>; + clock-frequency = <22572900>; }; /* Optional 32768Hz crystal or clock on RTCOSC pins */ diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index a25cd51e39ab..4a6ce8c8bf8f 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -305,6 +305,13 @@ reg = <0x60000 0x1000>; }; + rtc: rtc@c0000 { + compatible = "ti,am3352-rtc", "ti,da830-rtc"; + reg = <0xc0000 0x1000>; + interrupts = <75 76>; + ti,hwmods = "rtc"; + }; + mmc2: mmc@1d8000 { compatible = "ti,omap4-hsmmc"; ti,hwmods = "mmc2"; @@ -548,6 +555,20 @@ reg-names = "gmii-sel"; }; }; + + gpmc: gpmc@50000000 { + compatible = "ti,am3352-gpmc"; + ti,hwmods = "gpmc"; + ti,no-idle-on-init; + reg = <0x50000000 0x2000>; + interrupts = <100>; + gpmc,num-cs = <7>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; }; diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index 169a85578fc9..f50348bdd857 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "dm816x.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "DM8168 EVM"; @@ -85,8 +86,12 @@ ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */ nand@0,0 { + compatible = "ti,omap2-nand"; linux,mtd-name= "micron,mt29f2g16aadwp"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ #address-cells = <1>; #size-cells = <1>; ti,nand-ecc-opt = "bch8"; @@ -106,12 +111,9 @@ gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; partition@0 { diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index c3b8811a3e58..d9309a016117 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -183,6 +183,8 @@ dma-names = "rxtx"; gpmc,num-cs = <6>; gpmc,num-waitpins = <2>; + interrupt-controller; + #interrupt-cells = <2>; }; i2c1: i2c@48028000 { @@ -214,6 +216,13 @@ reg = <0x48200000 0x1000>; }; + rtc: rtc@480c0000 { + compatible = "ti,am3352-rtc", "ti,da830-rtc"; + reg = <0x480c0000 0x1000>; + interrupts = <75 76>; + ti,hwmods = "rtc"; + }; + mailbox: mailbox@480c8000 { compatible = "ti,omap4-mailbox"; reg = <0x480c8000 0x2000>; diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts index 79008069020d..f820573f4a4a 100644 --- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts +++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "dra62x.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "DRA62x J5 Eco EVM"; @@ -35,6 +36,63 @@ phy-mode = "rgmii"; }; +&gpmc { + ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */ + + nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + linux,mtd-name= "micron,mt29f2g16aadwp"; + #address-cells = <1>; + #size-cells = <1>; + ti,nand-ecc-opt = "bch8"; + nand-bus-width = <16>; + gpmc,device-width = <2>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + partition@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + partition@0x80000 { + label = "U-Boot"; + reg = <0x80000 0x1c0000>; + }; + partition@0x1c0000 { + label = "Environment"; + reg = <0x240000 0x40000>; + }; + partition@0x280000 { + label = "Kernel"; + reg = <0x280000 0x500000>; + }; + partition@0x780000 { + label = "Filesystem"; + reg = <0x780000 0xf880000>; + }; + }; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&sd1_pins>; diff --git a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi new file mode 100644 index 000000000000..1c39a8459b39 --- /dev/null +++ b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi @@ -0,0 +1,27 @@ +/* + * Device Tree Source for DRA7x SoC DSPEVE thermal + * + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/thermal/thermal.h> + +dspeve_thermal: dspeve_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&bandgap 3>; + + trips { + dspeve_crit: dspeve_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index cfc24e52244e..d9b87236019d 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -18,7 +18,7 @@ memory { device_type = "memory"; - reg = <0x80000000 0x60000000>; /* 1536 MB */ + reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */ }; evm_3v3_sd: fixedregulator-sd { @@ -741,9 +741,13 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&nand_flash_x16>; - ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ + ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* device IO registers */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <16>; @@ -766,7 +770,6 @@ gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-data-mux-bus-ns = <0>; /* MTD partition table */ /* All SPL-* partitions are sized to minimal length diff --git a/arch/arm/boot/dts/dra7-iva-thermal.dtsi b/arch/arm/boot/dts/dra7-iva-thermal.dtsi new file mode 100644 index 000000000000..dd74a5337d1f --- /dev/null +++ b/arch/arm/boot/dts/dra7-iva-thermal.dtsi @@ -0,0 +1,27 @@ +/* + * Device Tree Source for DRA7x SoC IVA thermal + * + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/thermal/thermal.h> + +iva_thermal: iva_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&bandgap 4>; + + trips { + iva_crit: iva_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index f82aa44c3cee..13ac88279427 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -15,8 +15,8 @@ #define MAX_SOURCES 400 / { - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; compatible = "ti,dra7xx"; interrupt-parent = <&crossbar_mpu>; @@ -57,10 +57,10 @@ compatible = "arm,cortex-a15-gic"; interrupt-controller; #interrupt-cells = <3>; - reg = <0x48211000 0x1000>, - <0x48212000 0x1000>, - <0x48214000 0x2000>, - <0x48216000 0x2000>; + reg = <0x0 0x48211000 0x0 0x1000>, + <0x0 0x48212000 0x0 0x1000>, + <0x0 0x48214000 0x0 0x2000>, + <0x0 0x48216000 0x0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; interrupt-parent = <&gic>; }; @@ -69,7 +69,7 @@ compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu"; interrupt-controller; #interrupt-cells = <3>; - reg = <0x48281000 0x1000>; + reg = <0x0 0x48281000 0x0 0x1000>; interrupt-parent = <&gic>; }; @@ -96,10 +96,10 @@ compatible = "ti,dra7-l3-noc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x0 0x0 0xc0000000>; ti,hwmods = "l3_main_1", "l3_main_2"; - reg = <0x44000000 0x1000000>, - <0x45000000 0x1000>; + reg = <0x0 0x44000000 0x0 0x1000000>, + <0x0 0x45000000 0x0 0x1000>; interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; @@ -156,6 +156,11 @@ compatible = "syscon"; reg = <0x1c04 0x0020>; }; + + scm_conf_pcie: scm_conf@1c24 { + compatible = "syscon"; + reg = <0x1c24 0x0024>; + }; }; cm_core_aon: cm_core_aon@5000 { @@ -1168,14 +1173,6 @@ status = "disabled"; }; - omap_control_sata: control-phy@4a002374 { - compatible = "ti,control-phy-pipe3"; - reg = <0x4a002374 0x4>; - reg-names = "power"; - clocks = <&sys_clkin1>; - clock-names = "sysclk"; - }; - /* OCP2SCP3 */ ocp2scp@4a090000 { compatible = "ti,omap-ocp2scp"; @@ -1190,7 +1187,7 @@ <0x4A096400 0x64>, /* phy_tx */ <0x4A096800 0x40>; /* pll_ctrl */ reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - ctrl-module = <&omap_control_sata>; + syscon-phy-power = <&scm_conf 0x374>; clocks = <&sys_clkin1>, <&sata_ref_clk>; clock-names = "sysclk", "refclk"; syscon-pllreset = <&scm_conf 0x3fc>; @@ -1202,16 +1199,18 @@ reg = <0x4a094000 0x80>, /* phy_rx */ <0x4a094400 0x64>; /* phy_tx */ reg-names = "phy_rx", "phy_tx"; - ctrl-module = <&omap_control_pcie1phy>; + syscon-phy-power = <&scm_conf_pcie 0x1c>; + syscon-pcs = <&scm_conf_pcie 0x10>; clocks = <&dpll_pcie_ref_ck>, <&dpll_pcie_ref_m2ldo_ck>, <&optfclk_pciephy1_32khz>, <&optfclk_pciephy1_clk>, <&optfclk_pciephy1_div_clk>, - <&optfclk_pciephy_div>; + <&optfclk_pciephy_div>, + <&sys_clkin1>; clock-names = "dpll_ref", "dpll_ref_m2", "wkupclk", "refclk", - "div-clk", "phy-div"; + "div-clk", "phy-div", "sysclk"; #phy-cells = <0>; }; @@ -1220,16 +1219,18 @@ reg = <0x4a095000 0x80>, /* phy_rx */ <0x4a095400 0x64>; /* phy_tx */ reg-names = "phy_rx", "phy_tx"; - ctrl-module = <&omap_control_pcie2phy>; + syscon-phy-power = <&scm_conf_pcie 0x20>; + syscon-pcs = <&scm_conf_pcie 0x10>; clocks = <&dpll_pcie_ref_ck>, <&dpll_pcie_ref_m2ldo_ck>, <&optfclk_pciephy2_32khz>, <&optfclk_pciephy2_clk>, <&optfclk_pciephy2_div_clk>, - <&optfclk_pciephy_div>; + <&optfclk_pciephy_div>, + <&sys_clkin1>; clock-names = "dpll_ref", "dpll_ref_m2", "wkupclk", "refclk", - "div-clk", "phy-div"; + "div-clk", "phy-div", "sysclk"; #phy-cells = <0>; status = "disabled"; }; @@ -1245,23 +1246,6 @@ ti,hwmods = "sata"; }; - omap_control_pcie1phy: control-phy@0x4a003c40 { - compatible = "ti,control-phy-pcie"; - reg = <0x4a003c40 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>; - reg-names = "power", "control_sma", "pcie_pcs"; - clocks = <&sys_clkin1>; - clock-names = "sysclk"; - }; - - omap_control_pcie2phy: control-pcie@0x4a003c44 { - compatible = "ti,control-phy-pcie"; - reg = <0x4a003c44 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>; - reg-names = "power", "control_sma", "pcie_pcs"; - clocks = <&sys_clkin1>; - clock-names = "sysclk"; - status = "disabled"; - }; - rtc: rtc@48838000 { compatible = "ti,am3352-rtc"; reg = <0x48838000 0x100>; @@ -1271,24 +1255,6 @@ clocks = <&sys_32k_ck>; }; - omap_control_usb2phy1: control-phy@4a002300 { - compatible = "ti,control-phy-usb2"; - reg = <0x4a002300 0x4>; - reg-names = "power"; - }; - - omap_control_usb3phy1: control-phy@4a002370 { - compatible = "ti,control-phy-pipe3"; - reg = <0x4a002370 0x4>; - reg-names = "power"; - }; - - omap_control_usb2phy2: control-phy@0x4a002e74 { - compatible = "ti,control-phy-usb2-dra7"; - reg = <0x4a002e74 0x4>; - reg-names = "power"; - }; - /* OCP2SCP1 */ ocp2scp@4a080000 { compatible = "ti,omap-ocp2scp"; @@ -1301,7 +1267,7 @@ usb2_phy1: phy@4a084000 { compatible = "ti,omap-usb2"; reg = <0x4a084000 0x400>; - ctrl-module = <&omap_control_usb2phy1>; + syscon-phy-power = <&scm_conf 0x300>; clocks = <&usb_phy1_always_on_clk32k>, <&usb_otg_ss1_refclk960m>; clock-names = "wkupclk", @@ -1310,9 +1276,10 @@ }; usb2_phy2: phy@4a085000 { - compatible = "ti,omap-usb2"; + compatible = "ti,dra7x-usb2-phy2", + "ti,omap-usb2"; reg = <0x4a085000 0x400>; - ctrl-module = <&omap_control_usb2phy2>; + syscon-phy-power = <&scm_conf 0xe74>; clocks = <&usb_phy2_always_on_clk32k>, <&usb_otg_ss2_refclk960m>; clock-names = "wkupclk", @@ -1326,7 +1293,7 @@ <0x4a084800 0x64>, <0x4a084c00 0x40>; reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - ctrl-module = <&omap_control_usb3phy1>; + syscon-phy-power = <&scm_conf 0x370>; clocks = <&usb_phy3_always_on_clk32k>, <&sys_clkin1>, <&usb_otg_ss1_refclk960m>; @@ -1357,7 +1324,6 @@ "otg"; phys = <&usb2_phy1>, <&usb3_phy1>; phy-names = "usb2-phy", "usb3-phy"; - tx-fifo-resize; maximum-speed = "super-speed"; dr_mode = "otg"; snps,dis_u3_susphy_quirk; @@ -1385,7 +1351,6 @@ "otg"; phys = <&usb2_phy2>; phy-names = "usb2-phy"; - tx-fifo-resize; maximum-speed = "high-speed"; dr_mode = "otg"; snps,dis_u3_susphy_quirk; @@ -1413,7 +1378,6 @@ interrupt-names = "peripheral", "host", "otg"; - tx-fifo-resize; maximum-speed = "high-speed"; dr_mode = "otg"; snps,dis_u3_susphy_quirk; @@ -1438,6 +1402,8 @@ gpmc,num-waitpins = <2>; #address-cells = <2>; #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; status = "disabled"; }; @@ -1613,6 +1579,8 @@ #include "omap4-cpu-thermal.dtsi" #include "omap5-gpu-thermal.dtsi" #include "omap5-core-thermal.dtsi" + #include "dra7-dspeve-thermal.dtsi" + #include "dra7-iva-thermal.dtsi" }; }; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 00b12002c07c..6affe2d137da 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -17,7 +17,7 @@ memory { device_type = "memory"; - reg = <0x80000000 0x40000000>; /* 1024 MB */ + reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */ }; aliases { @@ -492,13 +492,17 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&nand_default>; - ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ + ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */ nand@0,0 { /* To use NAND, DIP switch SW5 must be set like so: * SW5.1 (NAND_SELn) = ON (LOW) * SW5.9 (GPMC_WPN) = OFF (HIGH) */ + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* device IO registers */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <16>; @@ -521,7 +525,6 @@ gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-data-mux-bus-ns = <0>; /* MTD partition table */ /* All SPL-* partitions are sized to minimal length diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 8bcc47db1cd1..4220eeffc65a 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -76,7 +76,6 @@ interrupt-names = "peripheral", "host", "otg"; - tx-fifo-resize; maximum-speed = "high-speed"; dr_mode = "otg"; }; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 357bedeebfac..d0bae06b7eb7 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -2146,4 +2146,28 @@ ti,bit-shift = <0>; reg = <0x558>; }; + + ehrpwm0_tbclk: ehrpwm0_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&l4_root_clk_div>; + ti,bit-shift = <20>; + reg = <0x0558>; + }; + + ehrpwm1_tbclk: ehrpwm1_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&l4_root_clk_div>; + ti,bit-shift = <21>; + reg = <0x0558>; + }; + + ehrpwm2_tbclk: ehrpwm2_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&l4_root_clk_div>; + ti,bit-shift = <22>; + reg = <0x0558>; + }; }; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index 57795da616cb..bcce6f50c93d 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -9,6 +9,7 @@ */ #include "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -53,8 +54,8 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, - <0 121 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; }; clocks@e0110000 { @@ -158,7 +159,7 @@ timer@e0180000 { compatible = "renesas,em-sti"; reg = <0xe0180000 0x54>; - interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; clocks = <&sti_sclk>; clock-names = "sclk"; }; @@ -166,7 +167,7 @@ uart0: serial@e1020000 { compatible = "renesas,em-uart"; reg = <0xe1020000 0x38>; - interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&usia_u0_sclk>; clock-names = "sclk"; }; @@ -174,7 +175,7 @@ uart1: serial@e1030000 { compatible = "renesas,em-uart"; reg = <0xe1030000 0x38>; - interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; clocks = <&usib_u1_sclk>; clock-names = "sclk"; }; @@ -182,7 +183,7 @@ uart2: serial@e1040000 { compatible = "renesas,em-uart"; reg = <0xe1040000 0x38>; - interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; clocks = <&usib_u2_sclk>; clock-names = "sclk"; }; @@ -190,7 +191,7 @@ uart3: serial@e1050000 { compatible = "renesas,em-uart"; reg = <0xe1050000 0x38>; - interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; clocks = <&usib_u3_sclk>; clock-names = "sclk"; }; @@ -203,8 +204,8 @@ gpio0: gpio@e0050000 { compatible = "renesas,em-gio"; reg = <0xe0050000 0x2c>, <0xe0050040 0x20>; - interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>, - <0 68 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; #gpio-cells = <2>; @@ -215,8 +216,8 @@ gpio1: gpio@e0050080 { compatible = "renesas,em-gio"; reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>; - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>, - <0 70 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; gpio-ranges = <&pfc 0 32 32>; #gpio-cells = <2>; @@ -227,8 +228,8 @@ gpio2: gpio@e0050100 { compatible = "renesas,em-gio"; reg = <0xe0050100 0x2c>, <0xe0050140 0x20>; - interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>, - <0 72 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; gpio-ranges = <&pfc 0 64 32>; #gpio-cells = <2>; @@ -239,8 +240,8 @@ gpio3: gpio@e0050180 { compatible = "renesas,em-gio"; reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>; - interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>, - <0 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; #gpio-cells = <2>; @@ -251,8 +252,8 @@ gpio4: gpio@e0050200 { compatible = "renesas,em-gio"; reg = <0xe0050200 0x2c>, <0xe0050240 0x20>; - interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>, - <0 76 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; gpio-ranges = <&pfc 0 128 31>; #gpio-cells = <2>; @@ -266,7 +267,7 @@ #size-cells = <0>; compatible = "renesas,iic-emev2"; reg = <0xe0070000 0x28>; - interrupts = <0 32 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>; clocks = <&iic0_sclk>; clock-names = "sclk"; status = "disabled"; @@ -277,7 +278,7 @@ #size-cells = <0>; compatible = "renesas,iic-emev2"; reg = <0xe10a0000 0x28>; - interrupts = <0 33 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>; clocks = <&iic1_sclk>; clock-names = "sclk"; status = "disabled"; diff --git a/arch/arm/boot/dts/exynos-syscon-restart.dtsi b/arch/arm/boot/dts/exynos-syscon-restart.dtsi new file mode 100644 index 000000000000..09a2040054ed --- /dev/null +++ b/arch/arm/boot/dts/exynos-syscon-restart.dtsi @@ -0,0 +1,27 @@ +/* + * Samsung's Exynos SoC syscon reboot/poweroff nodes common definition. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + soc { + compatible = "simple-bus"; + + poweroff: syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmu_system_controller>; + offset = <0x330C>; /* PS_HOLD_CONTROL */ + mask = <0x5200>; /* reset value */ + }; + + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&pmu_system_controller>; + offset = <0x0400>; /* SWRESET */ + mask = <0x1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 443a35085846..9e2840b59ae8 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -43,7 +43,7 @@ linux,code = <KEY_POWER>; label = "power key"; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; }; @@ -67,7 +67,7 @@ interrupt-parent = <&gpx1>; interrupts = <5 0>; reg = <0x25>; - wakeup; + wakeup-source; muic: max77836-muic { compatible = "maxim,max77836-muic"; @@ -185,7 +185,7 @@ interrupt-parent = <&gpx0>; interrupts = <7 0>; reg = <0x66>; - wakeup; + wakeup-source; s2mps14_osc: clocks { compatible = "samsung,s2mps14-clk"; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 3e64d5dcdd60..1f102f3a1ab1 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -43,7 +43,7 @@ linux,code = <KEY_POWER>; label = "power key"; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; }; @@ -58,7 +58,7 @@ interrupt-parent = <&gpx1>; interrupts = <5 0>; reg = <0x25>; - wakeup; + wakeup-source; muic: max77836-muic { compatible = "maxim,max77836-muic"; @@ -246,7 +246,7 @@ interrupt-parent = <&gpx0>; interrupts = <7 0>; reg = <0x66>; - wakeup; + wakeup-source; s2mps14_osc: clocks { compatible = "samsung,s2mps14-clk"; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 18e3deffbf48..137f9015d4e8 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -19,6 +19,7 @@ #include "skeleton.dtsi" #include "exynos4-cpu-thermal.dtsi" +#include "exynos-syscon-restart.dtsi" #include <dt-bindings/clock/exynos3250.h> / { @@ -152,20 +153,6 @@ interrupt-parent = <&gic>; }; - poweroff: syscon-poweroff { - compatible = "syscon-poweroff"; - regmap = <&pmu_system_controller>; - offset = <0x330C>; /* PS_HOLD_CONTROL */ - mask = <0x5200>; /* Reset value */ - }; - - reboot: syscon-reboot { - compatible = "syscon-reboot"; - regmap = <&pmu_system_controller>; - offset = <0x0400>; /* SWRESET */ - mask = <0x1>; - }; - mipi_phy: video-phy@10020710 { compatible = "samsung,s5pv210-mipi-video-phy"; #phy-cells = <1>; @@ -381,7 +368,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 045785c44c04..c679b3cc3c48 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -22,6 +22,7 @@ #include <dt-bindings/clock/exynos4.h> #include <dt-bindings/clock/exynos-audss-clk.h> #include "skeleton.dtsi" +#include "exynos-syscon-restart.dtsi" / { interrupt-parent = <&gic>; @@ -76,6 +77,11 @@ reg = <0x10000000 0x100>; }; + sromc@12570000 { + compatible = "samsung,exynos-srom"; + reg = <0x12570000 0x14>; + }; + mipi_phy: video-phy@10020710 { compatible = "samsung,s5pv210-mipi-video-phy"; #phy-cells = <1>; @@ -158,20 +164,6 @@ interrupt-parent = <&gic>; }; - poweroff: syscon-poweroff { - compatible = "syscon-poweroff"; - regmap = <&pmu_system_controller>; - offset = <0x330C>; /* PS_HOLD_CONTROL */ - mask = <0x5200>; /* reset value */ - }; - - reboot: syscon-reboot { - compatible = "syscon-reboot"; - regmap = <&pmu_system_controller>; - offset = <0x0400>; /* SWRESET */ - mask = <0x1>; - }; - dsi_0: dsi@11C80000 { compatible = "samsung,exynos4210-mipi-dsi"; reg = <0x11C80000 0x10000>; @@ -661,7 +653,7 @@ amba { #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus"; + compatible = "simple-bus"; interrupt-parent = <&gic>; ranges; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 5821ad87e32c..ad7394c1d67a 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -60,35 +60,35 @@ label = "Up"; gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = <KEY_UP>; - gpio-key,wakeup; + wakeup-source; }; down { label = "Down"; gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_DOWN>; - gpio-key,wakeup; + wakeup-source; }; back { label = "Back"; gpios = <&gpx1 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; - gpio-key,wakeup; + wakeup-source; }; home { label = "Home"; gpios = <&gpx1 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; - gpio-key,wakeup; + wakeup-source; }; menu { label = "Menu"; gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 104cbb33d2bb..94ca7d36ab37 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -66,7 +66,7 @@ samsung,keypad-num-rows = <2>; samsung,keypad-num-columns = <8>; linux,keypad-no-autorepeat; - linux,keypad-wakeup; + wakeup-source; pinctrl-names = "default"; pinctrl-0 = <&keypad_rows &keypad_cols>; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index a50be640f1b0..1df2f0bc1d76 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -112,7 +112,7 @@ linux,code = <116>; label = "power"; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; ok-key { diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 4f5d37920c8d..9a75e3effbc9 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -92,7 +92,7 @@ linux,code = <171>; label = "config"; debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; camera-key { @@ -107,7 +107,7 @@ linux,code = <116>; label = "power"; debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; ok-key { diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 395c3ca9601e..5e5d3fecb04c 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -35,7 +35,7 @@ linux,code = <KEY_POWER>; label = "power key"; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index b44bb682e976..bf7b21b817e4 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -48,7 +48,7 @@ linux,code = <KEY_HOME>; label = "home key"; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 9e2e24c6177a..8bca699b7f20 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -423,7 +423,7 @@ samsung,keypad-num-rows = <3>; samsung,keypad-num-columns = <2>; linux,keypad-no-autorepeat; - linux,keypad-wakeup; + wakeup-source; pinctrl-0 = <&keypad_rows &keypad_cols>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index a130ab39fa77..a51069f3c03b 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -45,7 +45,7 @@ samsung,keypad-num-rows = <3>; samsung,keypad-num-columns = <8>; linux,keypad-no-autorepeat; - linux,keypad-wakeup; + wakeup-source; pinctrl-0 = <&keypad_rows &keypad_cols>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index a6f78c3da935..ed017cc7b14f 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -119,7 +119,7 @@ linux,code = <116>; label = "power"; debounce-interval = <10>; - gpio-key,wakeup; + wakeup-source; }; key-ok { @@ -127,7 +127,7 @@ linux,code = <139>; label = "ok"; debounce-inteval = <10>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/exynos4415.dtsi b/arch/arm/boot/dts/exynos4415.dtsi index ad764842fff5..28b04b6795c9 100644 --- a/arch/arm/boot/dts/exynos4415.dtsi +++ b/arch/arm/boot/dts/exynos4415.dtsi @@ -380,7 +380,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; interrupt-parent = <&gic>; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index e2439e87ee4a..92313cac035e 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -14,6 +14,7 @@ */ #include "skeleton.dtsi" +#include "exynos-syscon-restart.dtsi" / { interrupt-parent = <&gic>; @@ -30,6 +31,11 @@ reg = <0x10000000 0x100>; }; + sromc@12250000 { + compatible = "samsung,exynos-srom"; + reg = <0x12250000 0x14>; + }; + combiner: interrupt-controller@10440000 { compatible = "samsung,exynos4210-combiner"; #interrupt-cells = <2>; @@ -88,20 +94,6 @@ status = "disabled"; }; - poweroff: syscon-poweroff { - compatible = "syscon-poweroff"; - regmap = <&pmu_system_controller>; - offset = <0x330C>; /* PS_HOLD_CONTROL */ - mask = <0x5200>; /* reset value */ - }; - - reboot: syscon-reboot { - compatible = "syscon-reboot"; - regmap = <&pmu_system_controller>; - offset = <0x0400>; /* SWRESET */ - mask = <0x1>; - }; - fimd: fimd@14400000 { compatible = "samsung,exynos5250-fimd"; interrupt-parent = <&combiner>; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index c000532c1444..8b2acc74aa76 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -34,42 +34,42 @@ label = "SW-TACT2"; gpios = <&gpx1 4 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; - gpio-key,wakeup; + wakeup-source; }; home { label = "SW-TACT3"; gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; - gpio-key,wakeup; + wakeup-source; }; up { label = "SW-TACT4"; gpios = <&gpx1 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_UP>; - gpio-key,wakeup; + wakeup-source; }; down { label = "SW-TACT5"; gpios = <&gpx1 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_DOWN>; - gpio-key,wakeup; + wakeup-source; }; back { label = "SW-TACT6"; gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; - gpio-key,wakeup; + wakeup-source; }; wakeup { label = "SW-TACT7"; gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index 5cb33ba5e296..95210ef6a6b5 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -37,7 +37,7 @@ label = "Power"; gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; lid-switch { @@ -46,7 +46,7 @@ linux,input-type = <5>; /* EV_SW */ linux,code = <0>; /* SW_LID */ debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index c1edd6d038a9..0f500cb1eb2d 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -37,7 +37,7 @@ label = "Power"; gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; lid-switch { @@ -46,7 +46,7 @@ linux,input-type = <5>; /* EV_SW */ linux,code = <0>; /* SW_LID */ debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 33e2d5f7315b..e653ae04015a 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -674,7 +674,7 @@ amba { #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus"; + compatible = "simple-bus"; interrupt-parent = <&gic>; ranges; @@ -807,7 +807,7 @@ sss@10830000 { compatible = "samsung,exynos4210-secss"; - reg = <0x10830000 0x10000>; + reg = <0x10830000 0x300>; interrupts = <0 112 0>; clocks = <&clock CLK_SSS>; clock-names = "secss"; diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi new file mode 100644 index 000000000000..f9aa6bb55464 --- /dev/null +++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi @@ -0,0 +1,406 @@ +/* + * Exynos5410 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2013 Hardkernel Co., Ltd. + * http://www.hardkernel.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&pinctrl_0 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa2: gpa2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb2: gpb2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb3: gpb3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc3: gpc3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc2: gpc2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm5: gpm5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph0: gph0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph1: gph1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm7: gpm7 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy7: gpy7 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&combiner>; + #interrupt-cells = <2>; + interrupts = <23 0>, + <24 0>, + <25 0>, + <25 1>, + <26 0>, + <26 1>, + <27 0>, + <27 1>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&combiner>; + #interrupt-cells = <2>; + interrupts = <28 0>, + <28 1>, + <29 0>, + <29 1>, + <30 0>, + <30 1>, + <31 0>, + <31 1>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_1 { + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj2: gpj2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj3: gpj3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj4: gpj4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk1: gpk1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk2: gpk2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk3: gpk3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_2 { + gpv0: gpv0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv1: gpv1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv2: gpv2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv3: gpv3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv4: gpv4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_3 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts index cebeaab3abec..a731fbe28ebc 100644 --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos5410.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Samsung SMDK5410 board based on EXYNOS5410"; compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5"; @@ -61,6 +62,46 @@ disable-wp; }; +&pinctrl_0 { + srom_ctl: srom-ctl { + samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5", + "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3"; + samsung,pin-function = <2>; + samsung,pin-drv = <0>; + }; + + srom_ebi: srom-ebi { + samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3", + "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7", + "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3", + "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7", + "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3", + "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&sromc { + pinctrl-names = "default"; + pinctrl-0 = <&srom_ctl>, <&srom_ebi>; + + ethernet@3,0 { + compatible = "smsc,lan9115"; + reg = <3 0 0x10000>; + phy-mode = "mii"; + interrupt-parent = <&gpx0>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + reg-io-width = <2>; + smsc,irq-push-pull; + smsc,force-internal-phy; + + samsung,srom-page-mode = <1>; + samsung,srom-timing = <9 12 1 9 1 1>; + }; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index fad0779b1b6e..fa558674ac76 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -14,6 +14,7 @@ */ #include "skeleton.dtsi" +#include "exynos-syscon-restart.dtsi" #include <dt-bindings/clock/exynos5410.h> / { @@ -21,6 +22,10 @@ interrupt-parent = <&gic>; aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + pinctrl3 = &pinctrl_3; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -97,25 +102,22 @@ reg = <0x10000000 0x100>; }; + sromc: sromc@12250000 { + compatible = "samsung,exynos-srom"; + reg = <0x12250000 0x14>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x04000000 0x20000 + 1 0 0x05000000 0x20000 + 2 0 0x06000000 0x20000 + 3 0 0x07000000 0x20000>; + }; + pmu_system_controller: system-controller@10040000 { compatible = "samsung,exynos5410-pmu", "syscon"; reg = <0x10040000 0x5000>; }; - poweroff: syscon-poweroff { - compatible = "syscon-poweroff"; - regmap = <&pmu_system_controller>; - offset = <0x330C>; /* PS_HOLD_CONTROL */ - mask = <0x5200>; /* reset value */ - }; - - reboot: syscon-reboot { - compatible = "syscon-reboot"; - regmap = <&pmu_system_controller>; - offset = <0x0400>; /* SWRESET */ - mask = <0x1>; - }; - mct: mct@101C0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0xB00>; @@ -205,6 +207,36 @@ status = "disabled"; }; + pinctrl_0: pinctrl@13400000 { + compatible = "samsung,exynos5410-pinctrl"; + reg = <0x13400000 0x1000>; + interrupts = <0 45 0>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; + }; + + pinctrl_1: pinctrl@14000000 { + compatible = "samsung,exynos5410-pinctrl"; + reg = <0x14000000 0x1000>; + interrupts = <0 46 0>; + }; + + pinctrl_2: pinctrl@10d10000 { + compatible = "samsung,exynos5410-pinctrl"; + reg = <0x10d10000 0x1000>; + interrupts = <0 50 0>; + }; + + pinctrl_3: pinctrl@03860000 { + compatible = "samsung,exynos5410-pinctrl"; + reg = <0x03860000 0x1000>; + interrupts = <0 47 0>; + }; + uart0: serial@12C00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; @@ -233,3 +265,5 @@ }; }; }; + +#include "exynos5410-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 4ecef6981d5c..a103ce8c3985 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos5420.dtsi" +#include "exynos5420-cpus.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> @@ -47,11 +48,19 @@ label = "SW-TACT1"; gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; - gpio-key,wakeup; + wakeup-source; }; }; }; +&cpu0 { + cpu-supply = <&buck2_reg>; +}; + +&cpu4 { + cpu-supply = <&buck6_reg>; +}; + &usbdrd_dwc3_1 { dr_mode = "host"; }; diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi new file mode 100644 index 000000000000..5c052d7ff554 --- /dev/null +++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi @@ -0,0 +1,126 @@ +/* + * SAMSUNG EXYNOS5420 SoC cpu device tree source + * + * Copyright (c) 2015 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This file provides desired ordering for Exynos5420 and Exynos5800 + * boards: CPU[0123] being the A15. + * + * The Exynos5420, 5422 and 5800 actually share the same CPU configuration + * but particular boards choose different booting order. + * + * Exynos5420 and Exynos5800 always boot from Cortex-A15. On Exynos5422 + * booting cluster (big or LITTLE) is chosen by IROM code by reading + * the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting + * from the LITTLE: Cortex-A7. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x0>; + clocks = <&clock CLK_ARM_CLK>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; + operating-points-v2 = <&cluster_a15_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <11>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; + operating-points-v2 = <&cluster_a15_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <11>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x2>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; + operating-points-v2 = <&cluster_a15_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <11>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x3>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; + operating-points-v2 = <&cluster_a15_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <11>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + clocks = <&clock CLK_KFC_CLK>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + operating-points-v2 = <&cluster_a7_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <7>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + operating-points-v2 = <&cluster_a7_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <7>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + operating-points-v2 = <&cluster_a7_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <7>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + operating-points-v2 = <&cluster_a7_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <7>; + #cooling-cells = <2>; /* min followed by max */ + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 35cfb07dc4bb..3981ddb25036 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -15,6 +15,7 @@ #include <dt-bindings/clock/maxim,max77802.h> #include <dt-bindings/regulator/maxim,max77802.h> #include "exynos5420.dtsi" +#include "exynos5420-cpus.dtsi" / { model = "Google Peach Pit Rev 6+"; @@ -64,7 +65,7 @@ label = "Power"; gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; lid-switch { @@ -73,7 +74,7 @@ linux,input-type = <5>; /* EV_SW */ linux,code = <0>; /* SW_LID */ debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; }; @@ -143,6 +144,14 @@ vdd-supply = <&ldo9_reg>; }; +&cpu0 { + cpu-supply = <&buck2_reg>; +}; + +&cpu4 { + cpu-supply = <&buck6_reg>; +}; + &dp { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index ac35aefd320f..0785fedf441e 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos5420.dtsi" +#include "exynos5420-cpus.dtsi" #include <dt-bindings/gpio/gpio.h> / { @@ -89,6 +90,14 @@ }; +&cpu0 { + cpu-supply = <&buck2_reg>; +}; + +&cpu4 { + cpu-supply = <&buck6_reg>; +}; + &dp { pinctrl-names = "default"; pinctrl-0 = <&dp_hpd>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 48a0a55314f5..7b99cb58d82d 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -50,75 +50,121 @@ usbdrdphy1 = &usbdrd_phy1; }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x0>; - clock-frequency = <1800000000>; - cci-control-port = <&cci_control1>; + cluster_a15_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + opp@1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1250000>; + clock-latency-ns = <140000>; }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x1>; - clock-frequency = <1800000000>; - cci-control-port = <&cci_control1>; + opp@1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <1212500>; + clock-latency-ns = <140000>; }; - - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x2>; - clock-frequency = <1800000000>; - cci-control-port = <&cci_control1>; + opp@1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <1175000>; + clock-latency-ns = <140000>; }; - - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x3>; - clock-frequency = <1800000000>; - cci-control-port = <&cci_control1>; + opp@1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1137500>; + clock-latency-ns = <140000>; }; - - cpu4: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x100>; - clock-frequency = <1000000000>; - cci-control-port = <&cci_control0>; + opp@1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1112500>; + clock-latency-ns = <140000>; }; - - cpu5: cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x101>; - clock-frequency = <1000000000>; - cci-control-port = <&cci_control0>; + opp@1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1062500>; + clock-latency-ns = <140000>; }; - - cpu6: cpu@102 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x102>; - clock-frequency = <1000000000>; - cci-control-port = <&cci_control0>; + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1037500>; + clock-latency-ns = <140000>; + }; + opp@1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1012500>; + clock-latency-ns = <140000>; + }; + opp@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = < 987500>; + clock-latency-ns = <140000>; + }; + opp@900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = < 962500>; + clock-latency-ns = <140000>; }; + opp@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = < 937500>; + clock-latency-ns = <140000>; + }; + opp@700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = < 912500>; + clock-latency-ns = <140000>; + }; + }; - cpu7: cpu@103 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x103>; - clock-frequency = <1000000000>; - cci-control-port = <&cci_control0>; + cluster_a7_opp_table: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + opp@1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1275000>; + clock-latency-ns = <140000>; + }; + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1212500>; + clock-latency-ns = <140000>; + }; + opp@1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1162500>; + clock-latency-ns = <140000>; + }; + opp@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1112500>; + clock-latency-ns = <140000>; + }; + opp@900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1062500>; + clock-latency-ns = <140000>; + }; + opp@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1025000>; + clock-latency-ns = <140000>; + }; + opp@700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <975000>; + clock-latency-ns = <140000>; + }; + opp@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <937500>; + clock-latency-ns = <140000>; }; }; + /* + * The 'cpus' node is not present here but instead it is provided + * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi. + */ + cci: cci@10d20000 { compatible = "arm,cci-400"; #address-cells = <1>; @@ -252,8 +298,10 @@ compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; #power-domain-cells = <0>; - clocks = <&clock CLK_GSCL0>, <&clock CLK_GSCL1>; - clock-names = "asb0", "asb1"; + clocks = <&clock CLK_FIN_PLL>, + <&clock CLK_MOUT_USER_ACLK300_GSCL>, + <&clock CLK_GSCL0>, <&clock CLK_GSCL1>; + clock-names = "oscclk", "clk0", "asb0", "asb1"; }; isp_pd: power-domain@10044020 { @@ -327,7 +375,7 @@ amba { #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus"; + compatible = "simple-bus"; interrupt-parent = <&gic>; ranges; @@ -859,7 +907,7 @@ sss: sss@10830000 { compatible = "samsung,exynos4210-secss"; - reg = <0x10830000 0x10000>; + reg = <0x10830000 0x300>; interrupts = <0 112 0>; clocks = <&clock CLK_SSS>; clock-names = "secss"; diff --git a/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi index 2b289d7c0d13..3e4c4ad96d63 100644 --- a/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi +++ b/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi @@ -16,7 +16,7 @@ thermal-zones { cpu0_thermal: cpu0-thermal { thermal-sensors = <&tmu_cpu0 0>; - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; trips { cpu_alert0: cpu-alert-0 { @@ -39,6 +39,23 @@ hysteresis = <0>; /* millicelsius */ type = "critical"; }; + /* + * Exyunos542x support only 4 trip-points + * so for these polling mode is required. + * Start polling at temperature level of last + * interrupt-driven trip: cpu_alert2 + */ + cpu_alert3: cpu-alert-3 { + temperature = <70000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu_alert4: cpu-alert-4 { + temperature = <85000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + }; cooling-maps { map0 { @@ -53,6 +70,33 @@ trip = <&cpu_alert2>; cooling-device = <&fan0 2 3>; }; + /* + * When reaching cpu_alert3, reduce CPU + * by 2 steps. On Exynos5422/5800 that would + * be: 1500 MHz and 1100 MHz. + */ + map3 { + trip = <&cpu_alert3>; + cooling-device = <&cpu0 0 2>; + }; + map4 { + trip = <&cpu_alert3>; + cooling-device = <&cpu4 0 2>; + }; + + /* + * When reaching cpu_alert4, reduce CPU + * further, down to 600 MHz (11 steps for big, + * 7 steps for LITTLE). + */ + map5 { + trip = <&cpu_alert4>; + cooling-device = <&cpu0 3 7>; + }; + map6 { + trip = <&cpu_alert4>; + cooling-device = <&cpu4 3 11>; + }; }; }; }; diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi index b7f60c855459..bf3c6f1ec4ee 100644 --- a/arch/arm/boot/dts/exynos5422-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi @@ -4,78 +4,122 @@ * Copyright (c) 2015 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * The only difference between EXYNOS5422 and EXYNOS5800 is cpu ordering. The - * EXYNOS5422 is booting from Cortex-A7 core while the EXYNOS5800 is booting - * from Cortex-A15 core. + * This file provides desired ordering for Exynos5422: CPU[0123] being the A7. * - * EXYNOS5422 based board files can include this file to provide cpu ordering - * which could boot a cortex-a7 from cpu0. + * The Exynos5420, 5422 and 5800 actually share the same CPU configuration + * but particular boards choose different booting order. + * + * Exynos5420 and Exynos5800 always boot from Cortex-A15. On Exynos5422 + * booting cluster (big or LITTLE) is chosen by IROM code by reading + * the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting + * from the LITTLE: Cortex-A7. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -&cpu0 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x100>; - clock-frequency = <1000000000>; - cci-control-port = <&cci_control0>; -}; +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; -&cpu1 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x101>; - clock-frequency = <1000000000>; - cci-control-port = <&cci_control0>; -}; + cpu0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + clocks = <&clock CLK_KFC_CLK>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + operating-points-v2 = <&cluster_a7_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <11>; + #cooling-cells = <2>; /* min followed by max */ + }; -&cpu2 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x102>; - clock-frequency = <1000000000>; - cci-control-port = <&cci_control0>; -}; + cpu1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + operating-points-v2 = <&cluster_a7_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <11>; + #cooling-cells = <2>; /* min followed by max */ + }; -&cpu3 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x103>; - clock-frequency = <1000000000>; - cci-control-port = <&cci_control0>; -}; + cpu2: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + operating-points-v2 = <&cluster_a7_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <11>; + #cooling-cells = <2>; /* min followed by max */ + }; -&cpu4 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x0>; - clock-frequency = <1800000000>; - cci-control-port = <&cci_control1>; -}; + cpu3: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + operating-points-v2 = <&cluster_a7_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <11>; + #cooling-cells = <2>; /* min followed by max */ + }; -&cpu5 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x1>; - clock-frequency = <1800000000>; - cci-control-port = <&cci_control1>; -}; + cpu4: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + clocks = <&clock CLK_ARM_CLK>; + reg = <0x0>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; + operating-points-v2 = <&cluster_a15_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <15>; + #cooling-cells = <2>; /* min followed by max */ + }; -&cpu6 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x2>; - clock-frequency = <1800000000>; - cci-control-port = <&cci_control1>; -}; + cpu5: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; + operating-points-v2 = <&cluster_a15_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <15>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu6: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x2>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; + operating-points-v2 = <&cluster_a15_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <15>; + #cooling-cells = <2>; /* min followed by max */ + }; -&cpu7 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x3>; - clock-frequency = <1800000000>; - cci-control-port = <&cci_control1>; + cpu7: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x3>; + clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; + operating-points-v2 = <&cluster_a15_opp_table>; + cooling-min-level = <0>; + cooling-max-level = <15>; + #cooling-cells = <2>; /* min followed by max */ + }; + }; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 9134217446b8..1bd507bfa750 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -67,6 +67,14 @@ <19200000>; }; +&cpu0 { + cpu-supply = <&buck6_reg>; +}; + +&cpu4 { + cpu-supply = <&buck2_reg>; +}; + &hdmi { status = "okay"; hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index f18b51f2eeaa..b9342ec5b9cf 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -200,7 +200,7 @@ amba { #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus"; + compatible = "simple-bus"; interrupt-parent = <&gic>; ranges; }; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 064176f201e7..6e9edc1610c4 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -15,6 +15,7 @@ #include <dt-bindings/clock/maxim,max77802.h> #include <dt-bindings/regulator/maxim,max77802.h> #include "exynos5800.dtsi" +#include "exynos5420-cpus.dtsi" / { model = "Google Peach Pi Rev 10+"; @@ -63,7 +64,7 @@ label = "Power"; gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; lid-switch { @@ -72,7 +73,7 @@ linux,input-type = <5>; /* EV_SW */ linux,code = <0>; /* SW_LID */ debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; }; @@ -143,6 +144,14 @@ vdd-supply = <&ldo9_reg>; }; +&cpu0 { + cpu-supply = <&buck2_reg>; +}; + +&cpu4 { + cpu-supply = <&buck6_reg>; +}; + &dp { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi index c0bb3563cac1..8213016803e5 100644 --- a/arch/arm/boot/dts/exynos5800.dtsi +++ b/arch/arm/boot/dts/exynos5800.dtsi @@ -23,6 +23,114 @@ compatible = "samsung,exynos5800-clock"; }; +&cluster_a15_opp_table { + opp@1700000000 { + opp-microvolt = <1250000>; + }; + opp@1600000000 { + opp-microvolt = <1250000>; + }; + opp@1500000000 { + opp-microvolt = <1100000>; + }; + opp@1400000000 { + opp-microvolt = <1100000>; + }; + opp@1300000000 { + opp-microvolt = <1100000>; + }; + opp@1200000000 { + opp-microvolt = <1000000>; + }; + opp@1100000000 { + opp-microvolt = <1000000>; + }; + opp@1000000000 { + opp-microvolt = <1000000>; + }; + opp@900000000 { + opp-microvolt = <1000000>; + }; + opp@800000000 { + opp-microvolt = <900000>; + }; + opp@700000000 { + opp-microvolt = <900000>; + }; + opp@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <900000>; + clock-latency-ns = <140000>; + }; + opp@500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <900000>; + clock-latency-ns = <140000>; + }; + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <900000>; + clock-latency-ns = <140000>; + }; + opp@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <900000>; + clock-latency-ns = <140000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <900000>; + clock-latency-ns = <140000>; + }; +}; + +&cluster_a7_opp_table { + opp@1300000000 { + opp-microvolt = <1250000>; + }; + opp@1200000000 { + opp-microvolt = <1250000>; + }; + opp@1100000000 { + opp-microvolt = <1250000>; + }; + opp@1000000000 { + opp-microvolt = <1100000>; + }; + opp@900000000 { + opp-microvolt = <1100000>; + }; + opp@800000000 { + opp-microvolt = <1100000>; + }; + opp@700000000 { + opp-microvolt = <1000000>; + }; + opp@600000000 { + opp-microvolt = <1000000>; + }; + opp@500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <140000>; + }; + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <140000>; + }; + opp@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <900000>; + clock-latency-ns = <140000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <900000>; + clock-latency-ns = <140000>; + }; +}; + &mfc { compatible = "samsung,mfc-v8"; }; diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi index 6cbb62e5c6a9..c85d07e6db61 100644 --- a/arch/arm/boot/dts/hi3620.dtsi +++ b/arch/arm/boot/dts/hi3620.dtsi @@ -68,7 +68,7 @@ #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus"; + compatible = "simple-bus"; interrupt-parent = <&gic>; ranges = <0 0xfc000000 0x2000000>; diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi index 33130f8461c3..4e9562f806a2 100644 --- a/arch/arm/boot/dts/hip01.dtsi +++ b/arch/arm/boot/dts/hip01.dtsi @@ -43,7 +43,7 @@ amba { #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus"; + compatible = "simple-bus"; ranges; uart0: uart@10001000 { diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi index c52722b14e4a..fdcc23d203e5 100644 --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -34,7 +34,7 @@ amba { #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus"; + compatible = "simple-bus"; ranges; timer0: timer@00002000 { diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 1c6c07538a78..302d1168f424 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -569,7 +569,7 @@ }; }; - iio_hwmon { + iio-hwmon { compatible = "iio-hwmon"; io-channels = <&lradc 8>; }; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts index ed1d0b4578ef..cda6907a27b9 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts @@ -30,7 +30,7 @@ label = "BP1"; gpios = <&gpio3 18 GPIO_ACTIVE_LOW>; linux,code = <BTN_MISC>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index cde329e9b9e3..6b1f4bbe6ec6 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -269,13 +269,36 @@ status = "disabled"; }; - tsc: tsc@50030000 { - compatible = "fsl,imx25-adc", "fsl,imx21-tsc"; - reg = <0x50030000 0x4000>; + tscadc: tscadc@50030000 { + compatible = "fsl,imx25-tsadc"; + reg = <0x50030000 0xc>; interrupts = <46>; clocks = <&clks 119>; clock-names = "ipg"; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; status = "disabled"; + + adc: adc@50030800 { + compatible = "fsl,imx25-gcq"; + reg = <0x50030800 0x60>; + interrupt-parent = <&tscadc>; + interrupts = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + tsc: tcq@50030400 { + compatible = "fsl,imx25-tcq"; + reg = <0x50030400 0x60>; + interrupt-parent = <&tscadc>; + interrupts = <0>; + fsl,wires = <4>; + status = "disabled"; + }; }; ssi1: ssi@50034000 { @@ -497,7 +520,8 @@ compatible = "fsl,imx25-usb", "fsl,imx27-usb"; reg = <0x53ff4000 0x0200>; interrupts = <37>; - clocks = <&clks 70>; + clocks = <&clks 9>, <&clks 70>, <&clks 8>; + clock-names = "ipg", "ahb", "per"; fsl,usbmisc = <&usbmisc 0>; fsl,usbphy = <&usbphy0>; status = "disabled"; @@ -507,7 +531,8 @@ compatible = "fsl,imx25-usb", "fsl,imx27-usb"; reg = <0x53ff4400 0x0200>; interrupts = <35>; - clocks = <&clks 70>; + clocks = <&clks 9>, <&clks 70>, <&clks 8>; + clock-names = "ipg", "ahb", "per"; fsl,usbmisc = <&usbmisc 1>; fsl,usbphy = <&usbphy1>; status = "disabled"; @@ -516,8 +541,6 @@ usbmisc: usbmisc@53ff4600 { #index-cells = <1>; compatible = "fsl,imx25-usbmisc"; - clocks = <&clks 9>, <&clks 70>, <&clks 8>; - clock-names = "ipg", "ahb", "per"; reg = <0x53ff4600 0x00f>; }; diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts index 7ac4f1af16ac..1eaa131e2d18 100644 --- a/arch/arm/boot/dts/imx28-apf28dev.dts +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -225,7 +225,7 @@ label = "User button"; gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; linux,code = <0x100>; - gpio-key,wakeup; + wakeup-source; }; }; }; diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi index 927b391d2058..88594747f454 100644 --- a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi +++ b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi @@ -36,7 +36,7 @@ label = "SW3"; gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; linux,code = <BTN_MISC>; - gpio-key,wakeup; + wakeup-source; }; }; @@ -49,7 +49,7 @@ label = "SW4"; gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; linux,code = <BTN_MISC>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index 4ea89344a5ff..fd20e99c777e 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -130,7 +130,7 @@ compatible = "fixed-clock"; reg = <0>; #clock-cells = <0>; - clock-frequency = <27000000>; + clock-frequency = <26000000>; }; }; @@ -202,7 +202,7 @@ 0x02020049 /* row 2, col 2, KEY_KP9 */ >; gpio-activelow; - linux,wakeup; + wakeup-source; debounce-delay-ms = <100>; col-scan-delay-us = <5000>; linux,no-autorepeat; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index fae7b9069fc4..f637ec900cc8 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -1256,7 +1256,7 @@ }; }; - iio_hwmon { + iio-hwmon { compatible = "iio-hwmon"; io-channels = <&lradc 8>; }; diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts index 75b036700d31..4727bbb804e1 100644 --- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts +++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts @@ -30,7 +30,7 @@ label = "BP1"; gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; linux,code = <BTN_MISC>; - gpio-key,wakeup; + wakeup-source; linux,input-type = <1>; }; }; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index ed3dc3391d1c..14e1320d9f84 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -305,7 +305,8 @@ compatible = "fsl,imx35-usb", "fsl,imx27-usb"; reg = <0x53ff4000 0x0200>; interrupts = <37>; - clocks = <&clks 73>; + clocks = <&clks 9>, <&clks 73>, <&clks 28>; + clock-names = "ipg", "ahb", "per"; fsl,usbmisc = <&usbmisc 0>; fsl,usbphy = <&usbphy0>; status = "disabled"; @@ -315,7 +316,8 @@ compatible = "fsl,imx35-usb", "fsl,imx27-usb"; reg = <0x53ff4400 0x0200>; interrupts = <35>; - clocks = <&clks 73>; + clocks = <&clks 9>, <&clks 73>, <&clks 28>; + clock-names = "ipg", "ahb", "per"; fsl,usbmisc = <&usbmisc 1>; fsl,usbphy = <&usbphy1>; dr_mode = "host"; @@ -325,8 +327,6 @@ usbmisc: usbmisc@53ff4600 { #index-cells = <1>; compatible = "fsl,imx35-usbmisc"; - clocks = <&clks 9>, <&clks 73>, <&clks 28>; - clock-names = "ipg", "ahb", "per"; reg = <0x53ff4600 0x00f>; }; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 649befeb2cf9..018d24eb9965 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -107,7 +107,7 @@ label = "Power Button"; gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi index 321662f53e33..16fc69c69ab2 100644 --- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi +++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi @@ -156,7 +156,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc2>; cap-sdio-irq; - enable-sdio-wakeup; + wakeup-source; keep-power-in-suspend; max-frequency = <50000000>; no-1-8-v; diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index 34599c547459..d270df3e5891 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -41,7 +41,7 @@ label = "BP1"; gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; linux,code = <256>; - gpio-key,wakeup; + wakeup-source; linux,input-type = <1>; }; }; diff --git a/arch/arm/boot/dts/imx51-pinfunc.h b/arch/arm/boot/dts/imx51-pinfunc.h index 9eb92abaeb6d..82eae3c8a3ce 100644 --- a/arch/arm/boot/dts/imx51-pinfunc.h +++ b/arch/arm/boot/dts/imx51-pinfunc.h @@ -536,7 +536,6 @@ #define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7 0x2c4 0x6c4 0x000 0x3 0x0 #define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK 0x2c4 0x6c4 0x000 0x0 0x0 #define MX51_PAD_DISPB2_SER_CLK__GPIO3_7 0x2c4 0x6c4 0x990 0x4 0x1 -#define MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK 0x2c8 0x6c8 0x000 0x2 0x0 #define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16 0x2c8 0x6c8 0x000 0x2 0x0 #define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8 0x2c8 0x6c8 0x000 0x3 0x0 #define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS 0x2c8 0x6c8 0x000 0x0 0x0 diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index 3bc18835fb4b..4486bc47d140 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -69,21 +69,21 @@ label = "Home"; gpios = <&gpio5 10 0>; linux,code = <102>; /* KEY_HOME */ - gpio-key,wakeup; + wakeup-source; }; back { label = "Back"; gpios = <&gpio5 11 0>; linux,code = <158>; /* KEY_BACK */ - gpio-key,wakeup; + wakeup-source; }; program { label = "Program"; gpios = <&gpio5 12 0>; linux,code = <362>; /* KEY_PROGRAM */ - gpio-key,wakeup; + wakeup-source; }; volume-up { diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 53fd75c8ffcf..c05e7cfd0cbc 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -59,22 +59,22 @@ power { label = "Power Button"; - gpios = <&gpio1 8 0>; - linux,code = <116>; /* KEY_POWER */ + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; }; volume-up { label = "Volume Up"; - gpios = <&gpio2 14 0>; - linux,code = <115>; /* KEY_VOLUMEUP */ - gpio-key,wakeup; + gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; }; volume-down { label = "Volume Down"; - gpios = <&gpio2 15 0>; - linux,code = <114>; /* KEY_VOLUMEDOWN */ - gpio-key,wakeup; + gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts index 13e842b0c785..0ecb43d88522 100644 --- a/arch/arm/boot/dts/imx53-tx53-x03x.dts +++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts @@ -231,7 +231,7 @@ interrupts = <26 0>; gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; ti,x-plate-ohms = <660>; - linux,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx53-tx53-x13x.dts b/arch/arm/boot/dts/imx53-tx53-x13x.dts index 64804719f0f4..3cf682a681f4 100644 --- a/arch/arm/boot/dts/imx53-tx53-x13x.dts +++ b/arch/arm/boot/dts/imx53-tx53-x13x.dts @@ -101,7 +101,7 @@ interrupt-parent = <&gpio3>; interrupts = <23 0>; wakeup-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; - linux,wakeup; + wakeup-source; }; }; @@ -126,7 +126,7 @@ interrupt-parent = <&gpio3>; interrupts = <22 0>; wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; - linux,wakeup; + wakeup-source; }; }; @@ -183,13 +183,14 @@ status = "okay"; lvds0: lvds-channel@0 { - fsl,data-mapping = "jeida"; - fsl,data-width = <24>; + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; status = "okay"; display-timings { - native-mode = <&lvds_timing0>; - lvds_timing0: hsd100pxn1 { + native-mode = <&lvds0_timing0>; + + lvds0_timing0: hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; @@ -202,19 +203,36 @@ hsync-active = <0>; vsync-active = <0>; de-active = <1>; - pixelclk-active = <0>; + pixelclk-active = <1>; + }; + + lvds0_timing1: nl12880bc20 { + clock-frequency = <71000000>; + hactive = <1280>; + vactive = <800>; + hback-porch = <50>; + hsync-len = <60>; + hfront-porch = <50>; + vback-porch = <5>; + vsync-len = <13>; + vfront-porch = <5>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; }; }; }; lvds1: lvds-channel@1 { - fsl,data-mapping = "jeida"; - fsl,data-width = <24>; + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; status = "okay"; display-timings { - native-mode = <&lvds_timing1>; - lvds_timing1: hsd100pxn1 { + native-mode = <&lvds1_timing0>; + + lvds1_timing0: hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; @@ -227,7 +245,7 @@ hsync-active = <0>; vsync-active = <0>; de-active = <1>; - pixelclk-active = <0>; + pixelclk-active = <1>; }; }; }; diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index d3e50b22064f..bd3dfefa5778 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -37,7 +37,7 @@ compatible = "fixed-clock"; reg = <0>; #clock-cells = <0>; - clock-frequency = <27000000>; + clock-frequency = <26000000>; }; }; @@ -50,7 +50,7 @@ label = "Power Button"; gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; linux,code = <116>; /* KEY_POWER */ - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts index c275eecc9472..d35a5cdc3229 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts @@ -77,7 +77,7 @@ interrupt-parent = <&gpio3>; interrupts = <22 0>; wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; - linux,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts index f607d4f1d244..8c314eee4fdd 100644 --- a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts +++ b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts @@ -13,7 +13,7 @@ #include "imx6qdl-wandboard-revb1.dtsi" / { - model = "Wandboard i.MX6 Dual Lite Board"; + model = "Wandboard i.MX6 Dual Lite Board rev B1"; compatible = "wand,imx6dl-wandboard", "fsl,imx6dl"; memory { diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts new file mode 100644 index 000000000000..2cba82d0d859 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -0,0 +1,272 @@ +/* + * Copyright 2014-2016 Toradex AG + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx6q.dtsi" +#include "imx6qdl-apalis.dtsi" + +/ { + model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board"; + compatible = "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q", + "fsl,imx6q"; + + aliases { + i2c0 = &i2cddc; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + }; + + aliases { + rtc0 = &rtc_i2c; + rtc1 = &snvs_rtc; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + wakeup { + label = "Wake-Up"; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds_ixora>; + + led4-green { + label = "LED_4_GREEN"; + gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + }; + + led4-red { + label = "LED_4_RED"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + }; + + led5-green { + label = "LED_5_GREEN"; + gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + }; + + led5-red { + label = "LED_5_RED"; + gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + }; + }; + + pwmleds { + compatible = "pwm-leds"; + + ledpwm1 { + label = "PWM1"; + pwms = <&pwm1 0 50000>; + max-brightness = <255>; + }; + + ledpwm2 { + label = "PWM2"; + pwms = <&pwm2 0 50000>; + max-brightness = <255>; + }; + + ledpwm3 { + label = "PWM3"; + pwms = <&pwm3 0 50000>; + max-brightness = <255>; + }; + }; +}; + +&backlight { + brightness-levels = <0 127 191 223 239 247 251 255>; + default-brightness-level = <1>; + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2cddc>; + status = "okay"; +}; + +&i2cddc { + status = "okay"; +}; + +/* GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ +&i2c1 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + compatible = "st,m41t00"; + reg = <0x68>; + }; +}; + +&ldb { + status = "okay"; +}; + +&pcie { + /* active-low meaning opposite of regular PERST# active-low polarity */ + reset-gpio = <&gpio1 28 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +®_usb_otg_vbus { + status = "okay"; +}; + +®_usb_host_vbus { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&sound_spdif { + status = "okay"; +}; + +&spdif { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_host_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + status = "okay"; +}; + +/* SD1 */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd_cd>; + cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&iomuxc { + /* + * Mux the Apalis GPIOs + * GPIO5, 6 used by optional fusion_F0710A kernel module + */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2 + &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4 + &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6 + &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8 + >; + + pinctrl_leds_ixora: ledsixoragrp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 + MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts new file mode 100644 index 000000000000..3101be5bafa7 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-b450v3.dts @@ -0,0 +1,88 @@ +/* + * Copyright 2015 Timesys Corporation. + * Copyright 2015 General Electric Company + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q-bx50v3.dtsi" + +/ { + model = "General Electric B450v3"; + compatible = "ge,imx6q-b450v3", "advantech,imx6q-ba16", "fsl,imx6q"; + + chosen { + stdout-path = &uart3; + }; + + panel-lvds0 { + compatible = "innolux,g121x1-l03"; + backlight = <&backlight_lvds>; + power-supply = <®_lvds>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&ldb { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; + status = "okay"; + + lvds0: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts new file mode 100644 index 000000000000..823f55ccb60f --- /dev/null +++ b/arch/arm/boot/dts/imx6q-b650v3.dts @@ -0,0 +1,88 @@ +/* + * Copyright 2015 Timesys Corporation. + * Copyright 2015 General Electric Company + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q-bx50v3.dtsi" + +/ { + model = "General Electric B650v3"; + compatible = "ge,imx6q-b650v3", "advantech,imx6q-ba16", "fsl,imx6q"; + + chosen { + stdout-path = &uart3; + }; + + panel-lvds0 { + compatible = "innolux,g121x1-l03"; + backlight = <&backlight_lvds>; + power-supply = <®_lvds>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&ldb { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; + status = "okay"; + + lvds0: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts new file mode 100644 index 000000000000..984d00000403 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-b850v3.dts @@ -0,0 +1,157 @@ +/* + * Copyright 2015 Timesys Corporation. + * Copyright 2015 General Electric Company + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q-bx50v3.dtsi" + +/ { + model = "General Electric B850v3"; + compatible = "ge,imx6q-b850v3", "advantech,imx6q-ba16", "fsl,imx6q"; + + chosen { + stdout-path = &uart3; + }; + + panel-lvds0 { + compatible = "auo,b133htn01"; + backlight = <&backlight_lvds>; + ddc-i2c-bus = <&mux2_i2c2>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&ldb { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; + fsl,dual-channel; + status = "okay"; + + lvds0: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; +}; + +&i2c2 { + pca9547_ddc: mux@70 { + compatible = "nxp,pca9547"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + mux2_i2c1: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + }; + + mux2_i2c2: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + }; + + mux2_i2c3: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + }; + + mux2_i2c4: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + }; + + mux2_i2c5: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + }; + + mux2_i2c6: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x5>; + }; + + mux2_i2c7: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6>; + }; + + mux2_i2c8: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + }; + }; +}; + +&hdmi { + ddc-i2c-bus = <&mux2_i2c1>; +}; + +&mux1_i2c1 { + ads7830@4a { + compatible = "ti,ads7830"; + reg = <0x4a>; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi new file mode 100644 index 000000000000..8f6e6035f3f7 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -0,0 +1,632 @@ +/* + * Support for imx6 based Advantech DMS-BA16 Qseven module + * + * Copyright 2015 Timesys Corporation. + * Copyright 2015 General Electric Company + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx6q.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + memory { + reg = <0x10000000 0x40000000>; + }; + + backlight_lvds: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_display>; + pwms = <&pwm1 0 5000000>; + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100 101 102 103 104 105 106 107 108 109 + 110 111 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 128 129 + 130 131 132 133 134 135 136 137 138 139 + 140 141 142 143 144 145 146 147 148 149 + 150 151 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 168 169 + 170 171 172 173 174 175 176 177 178 179 + 180 181 182 183 184 185 186 187 188 189 + 190 191 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 208 209 + 210 211 212 213 214 215 216 217 218 219 + 220 221 222 223 224 225 226 227 228 229 + 230 231 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 248 249 + 250 251 252 253 254 255>; + default-brightness-level = <255>; + enable-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_lvds: regulator-lvds { + compatible = "regulator-fixed"; + regulator-name = "lvds_ppen"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_h1_vbus: regulator-usbh1vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_otg_vbus: regulator-usbotgvbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: n25q032@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0xc0000>; + }; + + partition@c0000 { + label = "env"; + reg = <0xc0000 0x10000>; + }; + + partition@d0000 { + label = "spare"; + reg = <0xd0000 0x130000>; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio7>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + + onkey { + compatible = "dlg,da9063-onkey"; + }; + + regulators { + vdd_bcore1: bcore1 { + regulator-min-microvolt = <1420000>; + regulator-max-microvolt = <1420000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_bcore2: bcore2 { + regulator-min-microvolt = <1420000>; + regulator-max-microvolt = <1420000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_bpro: bpro { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_bmem: bmem { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_bio: bio { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_bperi: bperi { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_ldo1: ldo1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1860000>; + }; + + vdd_ldo2: ldo2 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1860000>; + }; + + vdd_ldo3: ldo3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3440000>; + }; + + vdd_ldo4: ldo4 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3440000>; + }; + + vdd_ldo5: ldo5 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + }; + + vdd_ldo6: ldo6 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + }; + + vdd_ldo7: ldo7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + }; + + vdd_ldo8: ldo8 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + }; + + vdd_ldo9: ldo9 { + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <3600000>; + }; + + vdd_ldo10: ldo10 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + }; + + vdd_ldo11: ldo11 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + + rtc@32 { + compatible = "epson,rx8010"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + reg = <0x32>; + interrupt-parent = <&gpio4>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbhub>; + vbus-supply = <®_usb_h1_vbus>; + reset-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>; + bus-width = <8>; + vmmc-supply = <&vdd_bperi>; + vqmmc-supply = <&vdd_bio>; + non-removable; + keep-power-in-suspend; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 + >; + }; + + pinctrl_display: dispgrp { + fsl,pins = < + /* BLEN_OUT */ + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + /* LVDS_PPEN_OUT */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + /* SPI1 CS */ + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + >; + }; + + pinctrl_ecspi5: ecspi5grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x1b0b0 + MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x1b0b0 + MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x1b0b0 + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + /* FEC Reset */ + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + /* AR8033 Interrupt */ + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* GPIO 0-7 */ + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b0 + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 + MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x1b0b0 + /* SUS_S3_OUT to CPLD */ + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + /* PCIe Reset */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + /* PCIe Wake */ + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + /* PMIC Interrupt */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + /* RTC_INT */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbhub: usbhubgrp { + fsl,pins = < + /* HUB_RESET */ + MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + /* uSDHC2 CD */ + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; + + pinctrl_usdhc3_reset: usdhc3grp-reset { + fsl,pins = < + MX6QDL_PAD_SD3_RST__SD3_RESET 0x170F9 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + /* uSDHC4 CD */ + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0 + /* uSDHC4 SDIO PWR */ + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 + /* uSDHC4 SDIO WP */ + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 + /* uSDHC4 SDIO LED */ + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi new file mode 100644 index 000000000000..bb66dfd5294c --- /dev/null +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -0,0 +1,225 @@ +/* + * Copyright 2015 Timesys Corporation. + * Copyright 2015 General Electric Company + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx6q-ba16.dtsi" + +/ { + clocks { + mclk: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <22000000>; + }; + }; + + reg_wl18xx_vmmc: regulator-wl18xx { + compatible = "regulator-fixed"; + regulator-name = "vwl1807"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca9539 3 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + + reg_wlan: regulator-wlan { + compatible = "regulator-fixed"; + regulator-name = "3P3V_wlan"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio6 14 GPIO_ACTIVE_HIGH>; + }; + + sound { + compatible = "fsl,imx6q-ba16-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6q-ba16-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <4>; + }; +}; + +&ecspi5 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi5>; + status = "okay"; + + m25_eeprom: m25p80@0 { + compatible = "atmel,at25"; + spi-max-frequency = <20000000>; + size = <0x8000>; + pagesize = <64>; + reg = <0>; + address-width = <16>; + }; +}; + +&i2c1 { + pca9547: mux@70 { + compatible = "nxp,pca9547"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + mux1_i2c1: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + ads7830: ads7830@48 { + compatible = "ti,ads7830"; + reg = <0x48>; + }; + + mma8453: mma8453@1c { + compatible = "fsl,mma8453"; + reg = <0x1c>; + }; + }; + + mux1_i2c2: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + eeprom: eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; + + mpl3115: mpl3115@60 { + compatible = "fsl,mpl3115"; + reg = <0x60>; + }; + }; + + mux1_i2c3: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + }; + + mux1_i2c4: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&mclk>; + VDDA-supply = <®_1p8v>; + VDDIO-supply = <®_3p3v>; + }; + }; + + mux1_i2c5: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + + pca9539: pca9539@74 { + compatible = "nxp,pca9539"; + reg = <0x74>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio2>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + }; + }; + + mux1_i2c6: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x5>; + }; + + mux1_i2c7: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6>; + }; + + mux1_i2c8: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + }; + }; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <4>; + vmmc-supply = <®_wl18xx_vmmc>; + no-1-8-v; + non-removable; + wakeup-source; + keep-power-in-suspend; + cap-power-off-card; + max-frequency = <25000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio2>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; + tcxo-clock-frequency = <26000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts new file mode 100644 index 000000000000..4fa56019225e --- /dev/null +++ b/arch/arm/boot/dts/imx6q-evi.dts @@ -0,0 +1,502 @@ +/* + * Copyright 2016 United Western Technologies. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Uniwest Evi"; + compatible = "uniwest,imx6q-evi", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x40000000>; + }; + + reg_usbh1_vbus: regulator-usbhubreset { + compatible = "regulator-fixed"; + regulator-name = "usbh1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + startup-delay-us = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_hubreset>; + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + }; + + reg_usb_otg_vbus: regulator-usbotgvbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotgvbus>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + panel { + compatible = "sharp,lq101k1ly04"; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1cs>; + status = "okay"; +}; + +&ecspi3 { + fsl,spi-num-chipselects = <3>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>, + <&gpio4 25 GPIO_ACTIVE_LOW>, + <&gpio4 26 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3cs>; + status = "okay"; +}; + +&ecspi5 { + fsl,spi-num-chipselects = <4>; + cs-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>, + <&gpio1 13 GPIO_ACTIVE_LOW>, + <&gpio1 12 GPIO_ACTIVE_LOW>, + <&gpio2 9 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi5 &pinctrl_ecspi5cs>; + status = "okay"; + + eeprom: m95m02@1 { + compatible = "st,m95m02", "atmel,at25"; + size = <262144>; + pagesize = <256>; + address-width = <24>; + spi-max-frequency = <5000000>; + reg = <1>; + }; + + pb_rtc: rtc@3 { + compatible = "nxp,rtc-pcf2123"; + spi-max-frequency = <2450000>; + spi-cs-high; + reg = <3>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 0>; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpminand>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + clock-frequency = <100000>; + scl-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; + status = "okay"; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0x0b>; + sbs,poll-retry-count = <100>; + sbs,i2c-retry-count = <100>; + }; +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + status = "okay"; + + port@4 { + reg = <4>; + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usbh1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + dr_mode = "otg"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + non-removable; + status = "okay"; +}; + +&weim { + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x08000000 0x08000000>; + fsl,weim-cs-gpr = <&gpr>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_weimfpga &pinctrl_weimcs>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* pwr mcu alert irq */ + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 + /* remainder ???? */ + MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 + >; + }; + + pinctrl_ecspi1cs: ecspi1csgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x10068 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x10068 + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x1f068 + >; + }; + + pinctrl_ecspi3cs: ecspi3csgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x1b0b0 + MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b0 + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0 + MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0 + >; + }; + + pinctrl_ecspi5: ecspi5grp { + fsl,pins = < + MX6QDL_PAD_SD2_CLK__ECSPI5_SCLK 0x100b1 + MX6QDL_PAD_SD2_CMD__ECSPI5_MOSI 0x100b1 + MX6QDL_PAD_SD2_DAT0__ECSPI5_MISO 0x100b1 + >; + }; + + pinctrl_ecspi5cs: ecspi5csgrp { + fsl,pins = < + MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0 + MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0 + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0 + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x4001b0a8 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 + >; + }; + + pinctrl_gpminand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b8b1 + MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x4001b8b1 + >; + }; + + pinctrl_weimcs: weimcsgrp { + fsl,pins = < + MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1 + MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0b1 + >; + }; + + pinctrl_weimfpga: weimfpgagrp { + fsl,pins = < + /* weim misc */ + MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1 + MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1 + MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060 + MX6QDL_PAD_EIM_BCLK__EIM_BCLK 0xb0b1 + MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0xb0b1 + MX6QDL_PAD_EIM_EB0__EIM_EB0_B 0xb0b1 + MX6QDL_PAD_EIM_EB1__EIM_EB1_B 0xb0b1 + MX6QDL_PAD_EIM_EB2__EIM_EB2_B 0xb0b1 + MX6QDL_PAD_EIM_EB3__EIM_EB3_B 0xb0b1 + /* weim data */ + MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0 + MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0 + MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0 + MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0 + MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0 + MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0 + MX6QDL_PAD_EIM_D16__EIM_DATA16 0x1b0b0 + MX6QDL_PAD_EIM_D17__EIM_DATA17 0x1b0b0 + MX6QDL_PAD_EIM_D18__EIM_DATA18 0x1b0b0 + MX6QDL_PAD_EIM_D19__EIM_DATA19 0x1b0b0 + MX6QDL_PAD_EIM_D20__EIM_DATA20 0x1b0b0 + MX6QDL_PAD_EIM_D21__EIM_DATA21 0x1b0b0 + MX6QDL_PAD_EIM_D22__EIM_DATA22 0x1b0b0 + MX6QDL_PAD_EIM_D23__EIM_DATA23 0x1b0b0 + MX6QDL_PAD_EIM_D24__EIM_DATA24 0x1b0b0 + MX6QDL_PAD_EIM_D25__EIM_DATA25 0x1b0b0 + MX6QDL_PAD_EIM_D26__EIM_DATA26 0x1b0b0 + MX6QDL_PAD_EIM_D27__EIM_DATA27 0x1b0b0 + MX6QDL_PAD_EIM_D28__EIM_DATA28 0x1b0b0 + MX6QDL_PAD_EIM_D29__EIM_DATA29 0x1b0b0 + MX6QDL_PAD_EIM_D30__EIM_DATA30 0x1b0b0 + MX6QDL_PAD_EIM_D31__EIM_DATA31 0x1b0b0 + /* weim address */ + MX6QDL_PAD_EIM_A25__EIM_ADDR25 0xb0b1 + MX6QDL_PAD_EIM_A24__EIM_ADDR24 0xb0b1 + MX6QDL_PAD_EIM_A23__EIM_ADDR23 0xb0b1 + MX6QDL_PAD_EIM_A22__EIM_ADDR22 0xb0b1 + MX6QDL_PAD_EIM_A21__EIM_ADDR21 0xb0b1 + MX6QDL_PAD_EIM_A20__EIM_ADDR20 0xb0b1 + MX6QDL_PAD_EIM_A19__EIM_ADDR19 0xb0b1 + MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0b1 + MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0b1 + MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0b1 + MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1 + MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1 + MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1 + MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1 + MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1 + MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1 + MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1 + MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1 + MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1 + MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1 + MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1 + MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1 + MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1 + MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1 + MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1 + MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_CLK__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD3_CMD__UART2_CTS_B 0x1b0b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0 + /* usbh1_b OC */ + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + >; + }; + + pinctrl_usbh1_hubreset: usbh1hubresetgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + >; + }; + + pinctrl_usbotgvbus: usbotgvbusgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts index 00bd63e63d0c..b715deb4ea46 100644 --- a/arch/arm/boot/dts/imx6q-gk802.dts +++ b/arch/arm/boot/dts/imx6q-gk802.dts @@ -44,7 +44,7 @@ label = "recovery"; gpios = <&gpio3 16 1>; linux,code = <0x198>; /* KEY_RESTART */ - gpio-key,wakeup; + wakeup-source; }; }; }; diff --git a/arch/arm/boot/dts/imx6q-icore-rqs.dts b/arch/arm/boot/dts/imx6q-icore-rqs.dts new file mode 100644 index 000000000000..005318865f66 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-icore-rqs.dts @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2015 Amarula Solutions B.V. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-icore-rqs.dtsi" + +/ { + model = "Engicam i.CoreM6 Quad SOM"; + compatible = "engicam,imx6-icore-rqs", "fsl,imx6q"; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx-audio-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <4>; + }; +}; + +&i2c3 { + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + VDDD-supply = <®_1p8v>; + }; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index 5645d52850a7..0da81bc2c68a 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -91,34 +91,25 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_2p5v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; - reg_3p3v: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; - reg_5p0v: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "5P0V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; }; sound-sgtl5000 { @@ -205,6 +196,10 @@ }; &sata { + fsl,transmit-level-mV = <1104>; + fsl,transmit-boost-mdB = <3330>; + fsl,transmit-atten-16ths = <16>; + fsl,receive-eq-mdB = <3000>; status = "okay"; }; @@ -253,6 +248,9 @@ bus-width = <4>; cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + voltage-ranges = <3300 3300>; + no-1-8-v; status = "okay"; }; @@ -263,6 +261,9 @@ cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + voltage-ranges = <3300 3300>; + no-1-8-v; status = "okay"; }; @@ -270,163 +271,160 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; bus-width = <8>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + voltage-ranges = <3300 3300>; non-removable; no-1-8-v; status = "okay"; }; &iomuxc { - imx6q-tbs2910 { - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b059 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b059 + >; + }; - pinctrl_hdmi: hdmigrp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 - >; - }; + pinctrl_gpio_fan: gpiofangrp { + fsl,pins = < + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x130b1 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 - >; - }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_hdmi: hdmigrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + >; + }; - pinctrl_ir: irgrp { - fsl,pins = < - MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x17059 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x17059 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; - pinctrl_sgtl5000: sgtl5000grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 - MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 - MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 - MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 - >; - }; + pinctrl_ir: irgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x17059 + >; + }; - pinctrl_spdif: spdifgrp { - fsl,pins = <MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x13091 - >; - }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x17059 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 - >; - }; + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 - >; - }; + pinctrl_spdif: spdifgrp { + fsl,pins = <MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x13091 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x17059 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x17059 - MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x17059 - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; - pinctrl_usdhc4: usdhc4grp { - fsl,pins = < - MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 - MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 - MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 - MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 - MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 - MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 - MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 - MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 - MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 - MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 - >; - }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x17059 + >; }; - gpio_fan { - pinctrl_gpio_fan: gpiofangrp { - fsl,pins = < - MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x130b1 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x17059 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x17059 + >; }; - gpio_leds { - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b1 - >; - }; + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; }; }; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts index 88aa1e4c792d..2792da93db1f 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts @@ -77,7 +77,7 @@ interrupt-parent = <&gpio3>; interrupts = <22 0>; wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; - linux,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts index 20bf3c282623..9207d80f9cfb 100644 --- a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts +++ b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts @@ -13,7 +13,7 @@ #include "imx6qdl-wandboard-revb1.dtsi" / { - model = "Wandboard i.MX6 Quad Board"; + model = "Wandboard i.MX6 Quad Board rev B1"; compatible = "wand,imx6q-wandboard", "fsl,imx6q"; memory { diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 0d93c0e8f9ba..cd10c8de1904 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -22,7 +22,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <0>; @@ -162,6 +162,7 @@ }; ipu2_di0_mipi: endpoint@2 { + remote-endpoint = <&mipi_mux_2>; }; ipu2_di0_lvds0: endpoint@3 { @@ -183,6 +184,7 @@ }; ipu2_di1_mipi: endpoint@2 { + remote-endpoint = <&mipi_mux_3>; }; ipu2_di1_lvds0: endpoint@3 { diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi new file mode 100644 index 000000000000..b33e5a95a0f0 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -0,0 +1,984 @@ +/* + * Copyright 2014-2016 Toradex AG + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Toradex Apalis iMX6Q/D Module"; + compatible = "toradex,apalis_imx6q", "fsl,imx6q"; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + status = "disabled"; + }; + + /* DDC_I2C: I2C2_SDA/SCL on MXM3 205/207 */ + i2cddc: i2c@0 { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_ddc>; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH /* sda */ + &gpio2 30 GPIO_ACTIVE_HIGH /* scl */ + >; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + status = "disabled"; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; + + /* on module USB hub */ + reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>; + regulator-name = "usb_host_vbus_hub"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>; + startup-delay-us = <2000>; + enable-active-high; + status = "okay"; + }; + + reg_usb_host_vbus: regulator-usb-host-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; + regulator-name = "usb_host_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_usb_host_vbus_hub>; + status = "disabled"; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx6q-apalis-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <4>; + }; + + sound_spdif: sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-in; + spdif-out; + status = "disabled"; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "disabled"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "disabled"; +}; + +/* Apalis SPI1 */ +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "disabled"; +}; + +/* Apalis SPI2 */ +&ecspi2 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "disabled"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-handle = <ðphy>; + phy-reset-duration = <10>; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@7 { + interrupt-parent = <&gpio1>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; + reg = <7>; + }; + }; +}; + +/* + * GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier + * board) + */ +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "disabled"; +}; + +/* + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and + * touch screen controller + */ +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + regulator-boot-on; + regulator-always-on; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-boot-on; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-boot-on; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + /* STMPE811 touch screen controller */ + stmpe811@41 { + compatible = "st,stmpe811"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_int>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio4>; + interrupt-controller; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + reg = <0>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 7 length fractional part in z */ + st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + }; + }; +}; + +/* + * GEN2_I2C, CAM: I2C3_SDA/SCL on MXM3 201/203 (unused) + */ +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default", "recovery"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_recovery>; + scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; + status = "disabled"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "disabled"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "disabled"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "disabled"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "disabled"; +}; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif>; + status = "disabled"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>; + fsl,dte-mode; + fsl,uart-has-rtscts; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_dte>; + fsl,dte-mode; + fsl,uart-has-rtscts; + status = "disabled"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_dte>; + fsl,dte-mode; + status = "disabled"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5_dte>; + fsl,dte-mode; + status = "disabled"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "disabled"; +}; + +/* MMC1 */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + vqmmc-supply = <®_3p3v>; + bus-width = <8>; + voltage-ranges = <3300 3300>; + status = "disabled"; +}; + +/* SD1 */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + vqmmc-supply = <®_3p3v>; + bus-width = <4>; + voltage-ranges = <3300 3300>; + status = "disabled"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + vqmmc-supply = <®_3p3v>; + bus-width = <8>; + voltage-ranges = <3300 3300>; + non-removable; + status = "okay"; +}; + +&weim { + status = "disabled"; +}; + +&iomuxc { + /* pins used on module */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reset_moci>; + + pinctrl_apalis_gpio1: gpio2io04grp { + fsl,pins = < + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0 + >; + }; + + pinctrl_apalis_gpio2: gpio2io05grp { + fsl,pins = < + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x130b0 + >; + }; + + pinctrl_apalis_gpio3: gpio2io06grp { + fsl,pins = < + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x130b0 + >; + }; + + pinctrl_apalis_gpio4: gpio2io07grp { + fsl,pins = < + MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x130b0 + >; + }; + + pinctrl_apalis_gpio5: gpio6io10grp { + fsl,pins = < + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x130b0 + >; + }; + + pinctrl_apalis_gpio6: gpio6io09grp { + fsl,pins = < + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x130b0 + >; + }; + + pinctrl_apalis_gpio7: gpio1io02grp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b0 + >; + }; + + pinctrl_apalis_gpio8: gpio1io06grp { + fsl,pins = < + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x130b0 + >; + }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 + /* SGTL5000 sys_mclk */ + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_cam_mclk: cammclkgrp { + fsl,pins = < + /* CAM sys_mclk */ + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x100b1 + /* SPI1 cs */ + MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000b1 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + /* SPI2 cs */ + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + /* Ethernet PHY reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x000b0 + /* Ethernet PHY interrupt */ + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x000b1 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_gpio_keys: gpio1io04grp { + fsl,pins = < + /* Power button */ + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + >; + }; + + pinctrl_hdmi_cec: hdmicecgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_i2c_ddc: gpioi2cddcgrp { + fsl,pins = < + /* DDC bitbang */ + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3_recovery: i2c3recoverygrp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1 + MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1 + >; + }; + + pinctrl_ipu1_csi0: ipu1csi0grp { /* parallel camera */ + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0xb0b1 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0xb0b1 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0xb0b1 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0xb0b1 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0xb0b1 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0xb0b1 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0xb0b1 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0xb0b1 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0xb0b1 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0xb0b1 + >; + }; + + pinctrl_ipu1_lcdif: ipu1lcdifgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK 0x61 + /* DE */ + MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15 0x61 + /* HSync */ + MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02 0x61 + /* VSync */ + MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03 0x61 + MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00 0x61 + MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01 0x61 + MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02 0x61 + MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03 0x61 + MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04 0x61 + MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05 0x61 + MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06 0x61 + MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07 0x61 + MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08 0x61 + MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09 0x61 + MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10 0x61 + MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11 0x61 + MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12 0x61 + MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13 0x61 + MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14 0x61 + MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15 0x61 + MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16 0x61 + MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17 0x61 + MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18 0x61 + MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19 0x61 + MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20 0x61 + MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21 0x61 + MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22 0x61 + MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23 0x61 + >; + }; + + pinctrl_ipu2_vdac: ipu2vdacgrp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0xd1 + MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15 0xd1 + MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02 0xd1 + MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03 0xd1 + MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00 0xf9 + MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01 0xf9 + MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02 0xf9 + MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03 0xf9 + MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04 0xf9 + MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05 0xf9 + MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06 0xf9 + MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07 0xf9 + MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08 0xf9 + MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09 0xf9 + MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10 0xf9 + MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11 0xf9 + MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12 0xf9 + MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13 0xf9 + MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14 0xf9 + MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15 0xf9 + >; + }; + + pinctrl_mmc_cd: gpiommccdgrp { + fsl,pins = < + /* MMC1 CD */ + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp { + fsl,pins = < + /* USBH_EN */ + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0f058 + >; + }; + + pinctrl_regulator_usbhub_pwr: gpioregusbhubpwrgrp { + fsl,pins = < + /* USBH_HUB_EN */ + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0f058 + >; + }; + + pinctrl_regulator_usbotg_pwr: gpioregusbotgpwrgrp { + fsl,pins = < + /* USBO1 power en */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0f058 + >; + }; + + pinctrl_reset_moci: gpioresetmocigrp { + fsl,pins = < + /* RESET_MOCI control */ + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0f058 + >; + }; + + pinctrl_sd_cd: gpiosdcdgrp { + fsl,pins = < + /* SD1 CD */ + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0 + >; + }; + + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 + MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 + >; + }; + + pinctrl_touch_int: gpiotouchintgrp { + fsl,pins = < + /* STMPE811 interrupt */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + >; + }; + + pinctrl_uart1_dce: uart1dcegrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + /* DTE mode */ + pinctrl_uart1_dte: uart1dtegrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1 + >; + }; + + /* Additional DTR, DSR, DCD */ + pinctrl_uart1_ctrl: uart1ctrlgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0 + MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0 + MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0 + >; + }; + + pinctrl_uart2_dce: uart2dcegrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + >; + }; + + /* DTE mode */ + pinctrl_uart2_dte: uart2dtegrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart4_dce: uart4dcegrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + /* DTE mode */ + pinctrl_uart4_dte: uart4dtegrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5_dce: uart5dcegrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + /* DTE mode */ + pinctrl_uart5_dte: uart5dtegrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 + MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071 + MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071 + MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17071 + MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17071 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + /* eMMC reset */ + MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3100mhzgrp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 + /* eMMC reset */ + MX6QDL_PAD_SD3_RST__SD3_RESET 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3200mhzgrp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 + /* eMMC reset */ + MX6QDL_PAD_SD3_RST__SD3_RESET 0x170f9 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi index e26ebeb5b45c..a8f3500ee522 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi @@ -94,7 +94,7 @@ label = "User button"; gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; linux,code = <BTN_MISC>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 5cd16f2178b8..9d7ab6cdc9a6 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -320,13 +320,13 @@ pinctrl_pwm3: pwm3grp { fsl,pins = < - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 >; }; pinctrl_pwm4: pwm4grp { fsl,pins = < - MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 9fa8a10c7cc8..8dd74e98ffd6 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -473,7 +473,7 @@ pinctrl_pwm3: pwm3grp { fsl,pins = < - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index e8375e173873..ec3fe7444e15 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -462,7 +462,7 @@ pinctrl_pwm3: pwm3grp { fsl,pins = < - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 66983dc5cbda..367cc49eea0d 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -397,8 +397,9 @@ }; &pwm4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm4>; + pinctrl-names = "default", "state_dio"; + pinctrl-0 = <&pinctrl_pwm4_backlight>; + pinctrl-1 = <&pinctrl_pwm4_dio>; status = "okay"; }; @@ -573,12 +574,20 @@ >; }; - pinctrl_pwm4: pwm4grp { + pinctrl_pwm4_backlight: pwm4grpbacklight { fsl,pins = < + /* LVDS_PWM J6.5 */ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 >; }; + pinctrl_pwm4_dio: pwm4grpdio { + fsl,pins = < + /* DIO3 J16.4 */ + MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi index cca39f194017..f27f184558fb 100644 --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -262,7 +262,7 @@ pinctrl_pwm3: pwm3grp { fsl,pins = < - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index 6dd0b764e036..d6c2358ffad4 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -48,7 +48,7 @@ ir_recv: ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio3 5 1>; + gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>; }; @@ -67,7 +67,7 @@ reg_usbh1_vbus: usb-h1-vbus { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio1 0 0>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>; regulator-name = "usb_h1_vbus"; @@ -78,7 +78,7 @@ reg_usbotg_vbus: usb-otg-vbus { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>; regulator-name = "usb_otg_vbus"; @@ -253,7 +253,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_pcie_reset>; - reset-gpio = <&gpio3 4 0>; + reset-gpio = <&gpio3 4 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi new file mode 100644 index 000000000000..f8d945a56525 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi @@ -0,0 +1,411 @@ +/* + * Copyright (C) 2015 Amarula Solutions B.V. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/imx6qdl-clock.h> + +/ { + memory { + reg = <0x10000000 0x80000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_sd3_vmmc: regulator-sd3-vmmc { + compatible = "regulator-fixed"; + regulator-name = "P3V3_SD3_SWITCHED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 4 GPIO_ACTIVE_LOW>; + enable-active-high; + }; + + reg_sd4_vmmc: regulator-sd4-vmmc { + compatible = "regulator-fixed"; + regulator-name = "P3V3_SD4_SWITCHED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + usb_hub: usb-hub { + compatible = "smsc,usb3503a"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbhub>; + reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + clocks = <&clks IMX6QDL_CLK_LVDS2_GATE>; + clock-names = "refclk"; + }; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-handle = <ð_phy>; + phy-mode = "rgmii"; + status = "okay"; + + mdio { + eth_phy: ethernet-phy { + rxc-skew-ps = <1140>; + txc-skew-ps = <1140>; + txen-skew-ps = <600>; + rxdv-skew-ps = <240>; + rxd0-skew-ps = <420>; + rxd1-skew-ps = <600>; + rxd2-skew-ps = <420>; + rxd3-skew-ps = <240>; + txd0-skew-ps = <60>; + txd1-skew-ps = <60>; + txd2-skew-ps = <60>; + txd3-skew-ps = <240>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + disable-over-current; + clocks = <&clks IMX6QDL_CLK_USBOH3>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + no-1-8-v; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + vmcc-supply = <®_sd3_vmmc>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + bus-witdh=<4>; + no-1-8-v; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc4>; + pinctrl-1 = <&pinctrl_usdhc4_100mhz>; + pinctrl-2 = <&pinctrl_usdhc4_200mhz>; + vmcc-supply = <®_sd4_vmmc>; + bus-witdh=<8>; + no-1-8-v; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl_audmux: audmux { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0 + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1f059 /* PCIe Reset */ + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbhub: usbhubgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1f059 /* HUB USB Reset */ + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17070 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10070 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17070 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17070 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17070 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17070 + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1f059 /* CD */ + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f059 /* PWR */ + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B1 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B1 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B1 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B1 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B1 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B1 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17070 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10070 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17070 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17070 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17070 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17070 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17070 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17070 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17070 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17070 + >; + }; + + pinctrl_usdhc4_100mhz: usdhc4grp_100mhz { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x170B1 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x100B1 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x170B1 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x170B1 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x170B1 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x170B1 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x170B1 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x170B1 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x170B1 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x170B1 + >; + }; + + pinctrl_usdhc4_200mhz: usdhc4grp_200mhz { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x170F9 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x100F9 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x170F9 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x170F9 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x170F9 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x170F9 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x170F9 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x170F9 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x170F9 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x170F9 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi index 6d4069cc9419..86460e46d055 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi @@ -154,6 +154,7 @@ bus-width = <4>; mmc-pwrseq = <&usdhc1_pwrseq>; keep-power-in-suspend; + no-1-8-v; non-removable; vmmc-supply = <®_brcm>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index a35d54fd9cd3..dc74aa395ff5 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -138,7 +138,7 @@ label = "Power Button"; gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; menu { diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index caeed56b74a3..c6c590d1e940 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -119,7 +119,7 @@ label = "Power Button"; gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; menu { diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 1a69a3420ac8..0f1aca450fe6 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -105,7 +105,7 @@ label = "Power Button"; gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; menu { diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index a6d445c17779..0b5c4de74485 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -79,21 +79,21 @@ power { label = "Power Button"; gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; - gpio-key,wakeup; + wakeup-source; linux,code = <KEY_POWER>; }; volume-up { label = "Volume Up"; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - gpio-key,wakeup; + wakeup-source; linux,code = <KEY_VOLUMEUP>; }; volume-down { label = "Volume Down"; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - gpio-key,wakeup; + wakeup-source; linux,code = <KEY_VOLUMEDOWN>; }; }; @@ -238,6 +238,7 @@ regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; + regulator-ramp-delay = <6250>; }; sw3a_reg: sw3a { diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index 13cb7ccfea44..efd06b576f1d 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -41,7 +41,7 @@ compatible = "fixed-clock"; reg = <0>; #clock-cells = <0>; - clock-frequency = <27000000>; + clock-frequency = <26000000>; }; }; @@ -52,7 +52,7 @@ label = "Power Button"; gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; }; }; @@ -227,6 +227,11 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET_REF>, + <&clks IMX6QDL_CLK_ENET_REF>; + clock-names = "ipg", "ahb", "ptp", "enet_out"; phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; phy-supply = <®_3v3_etn>; @@ -276,7 +281,7 @@ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; - linux,wakeup; + wakeup-source; }; touchscreen: tsc2007@48 { @@ -288,7 +293,7 @@ interrupts = <26 0>; gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; ti,x-plate-ohms = <660>; - linux,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index 1211da894ee9..d3e54e40a017 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -34,6 +34,18 @@ gpio = <&gpio7 12 0>; }; }; + + sound { + compatible = "fsl,imx6q-udoo-ac97", + "fsl,imx-audio-ac97"; + model = "fsl,imx6q-udoo-ac97"; + audio-cpu = <&ssi1>; + audio-routing = + "RX", "Mic Jack", + "Headphone Jack", "TX"; + mux-int-port = <1>; + mux-ext-port = <6>; + }; }; &fec { @@ -109,6 +121,36 @@ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 >; }; + + pinctrl_ac97_running: ac97running { + fsl,pins = < + MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x1b0b0 + MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x1b0b0 + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x1b0b0 + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x1b0b0 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + >; + }; + + pinctrl_ac97_warm_reset: ac97warmreset { + fsl,pins = < + MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x1b0b0 + MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x1b0b0 + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x1b0b0 + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x1b0b0 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + >; + }; + + pinctrl_ac97_reset: ac97reset { + fsl,pins = < + MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 + MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x1b0b0 + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x1b0b0 + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x1b0b0 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + >; + }; }; }; @@ -132,3 +174,18 @@ non-removable; status = "okay"; }; + +&audmux { + status = "okay"; +}; + +&ssi1 { + cell-index = <0>; + fsl,mode = "ac97-slave"; + pinctrl-names = "ac97-running", "ac97-reset", "ac97-warm-reset"; + pinctrl-0 = <&pinctrl_ac97_running>; + pinctrl-1 = <&pinctrl_ac97_reset>; + pinctrl-2 = <&pinctrl_ac97_warm_reset>; + ac97-gpios = <&gpio4 19 0 &gpio4 18 0 &gpio2 30 0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index f74d3db4846d..b42822aa14f2 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -261,7 +261,7 @@ clocks = <&clks IMX6QDL_CLK_ECSPI1>, <&clks IMX6QDL_CLK_ECSPI1>; clock-names = "ipg", "per"; - dmas = <&sdma 3 7 1>, <&sdma 4 7 2>; + dmas = <&sdma 3 8 1>, <&sdma 4 8 2>; dma-names = "rx", "tx"; status = "disabled"; }; @@ -275,7 +275,7 @@ clocks = <&clks IMX6QDL_CLK_ECSPI2>, <&clks IMX6QDL_CLK_ECSPI2>; clock-names = "ipg", "per"; - dmas = <&sdma 5 7 1>, <&sdma 6 7 2>; + dmas = <&sdma 5 8 1>, <&sdma 6 8 2>; dma-names = "rx", "tx"; status = "disabled"; }; @@ -289,7 +289,7 @@ clocks = <&clks IMX6QDL_CLK_ECSPI3>, <&clks IMX6QDL_CLK_ECSPI3>; clock-names = "ipg", "per"; - dmas = <&sdma 7 7 1>, <&sdma 8 7 2>; + dmas = <&sdma 7 8 1>, <&sdma 8 8 2>; dma-names = "rx", "tx"; status = "disabled"; }; @@ -303,7 +303,7 @@ clocks = <&clks IMX6QDL_CLK_ECSPI4>, <&clks IMX6QDL_CLK_ECSPI4>; clock-names = "ipg", "per"; - dmas = <&sdma 9 7 1>, <&sdma 10 7 2>; + dmas = <&sdma 9 8 1>, <&sdma 10 8 2>; dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qp-sabreauto.dts b/arch/arm/boot/dts/imx6qp-sabreauto.dts new file mode 100644 index 000000000000..5ce3840d83d3 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-sabreauto.dts @@ -0,0 +1,93 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6qp.dtsi" +#include "imx6qdl-sabreauto.dtsi" + +/ { + model = "Freescale i.MX6 Quad Plus SABRE Automotive Board"; + compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp"; +}; + +&i2c2 { + max7322: gpio@68 { + compatible = "maxim,max7322"; + reg = <0x68>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&iomuxc { + imx6qdl-sabreauto { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_KEY_COL2__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b018 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b018 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b018 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b018 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b018 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b018 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b018 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b018 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b018 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b018 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b018 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b018 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + }; +}; + +&pcie { + status = "disabled"; +}; + +&vgen3_reg { + regulator-always-on; +}; diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts new file mode 100644 index 000000000000..b23458062f5e --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-sabresd.dts @@ -0,0 +1,93 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6qp.dtsi" +#include "imx6qdl-sabresd.dtsi" + +/ { + model = "Freescale i.MX6 Quad Plus SABRE Smart Device Board"; + compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp"; +}; + +&cpu0 { + arm-supply = <&sw2_reg>; +}; + +&iomuxc { + imx6qdl-sabresd { + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059 + MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059 + MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059 + MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10071 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; + }; +}; + +&pcie { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi new file mode 100644 index 000000000000..1ada71437e49 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp.dtsi @@ -0,0 +1,86 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx6q.dtsi" + +/ { + soc { + ocram2: sram@00940000 { + compatible = "mmio-sram"; + reg = <0x00940000 0x20000>; + clocks = <&clks IMX6QDL_CLK_OCRAM>; + }; + + ocram3: sram@00960000 { + compatible = "mmio-sram"; + reg = <0x00960000 0x20000>; + clocks = <&clks IMX6QDL_CLK_OCRAM>; + }; + + ipu1: ipu@02400000 { + compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu"; + clocks = <&clks IMX6QDL_CLK_IPU1>, + <&clks IMX6QDL_CLK_IPU1_DI0>, <&clks IMX6QDL_CLK_IPU1_DI1>, + <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>, + <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>, + <&clks IMX6QDL_CLK_PRG0_APB>; + clock-names = "bus", + "di0", "di1", + "di0_sel", "di1_sel", + "ldb_di0", "ldb_di1", "prg"; + }; + + ipu2: ipu@02800000 { + compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu"; + clocks = <&clks IMX6QDL_CLK_IPU2>, + <&clks IMX6QDL_CLK_IPU2_DI0>, <&clks IMX6QDL_CLK_IPU2_DI1>, + <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>, + <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>, + <&clks IMX6QDL_CLK_PRG1_APB>; + clock-names = "bus", + "di0", "di1", + "di0_sel", "di1_sel", + "ldb_di0", "ldb_di1", "prg"; + }; + + }; +}; diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts index 10c69963100f..058bcdceb81a 100644 --- a/arch/arm/boot/dts/imx6sl-warp.dts +++ b/arch/arm/boot/dts/imx6sl-warp.dts @@ -118,7 +118,7 @@ bus-width = <4>; non-removable; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; mmc-pwrseq = <&usdhc3_pwrseq>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts index 115f3fd78971..96ea936eeeb0 100644 --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -52,7 +52,7 @@ cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; vmmc-supply = <&vcc_sd3>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index 94ac4005d9cd..f1d37306e8bf 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -184,6 +184,13 @@ status = "okay"; }; +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + &i2c4 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -283,7 +290,7 @@ non-removable; no-1-8-v; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; status = "okay"; }; @@ -296,7 +303,7 @@ cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; vmmc-supply = <&vcc_sd3>; status = "okay"; }; @@ -378,6 +385,13 @@ >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1 + MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1 + >; + }; + pinctrl_i2c4: i2c4grp { fsl,pins = < MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x4001b8b1 diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts index 6aaa5ec3d846..720728001d3c 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts @@ -8,7 +8,6 @@ /dts-v1/; -#include <dt-bindings/input/input.h> #include "imx6ul.dtsi" / { @@ -131,7 +130,7 @@ pinctrl-2 = <&pinctrl_usdhc1_200mhz>; cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; vmmc-supply = <®_sd1_vmmc>; status = "okay"; }; @@ -141,7 +140,7 @@ pinctrl-0 = <&pinctrl_usdhc2>; no-1-8-v; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ul-pinfunc.h b/arch/arm/boot/dts/imx6ul-pinfunc.h index 20c7da1affce..0034eeb84542 100644 --- a/arch/arm/boot/dts/imx6ul-pinfunc.h +++ b/arch/arm/boot/dts/imx6ul-pinfunc.h @@ -14,925 +14,925 @@ * The pin function ID is a tuple of * <mux_reg conf_reg input_reg mux_mode input_val> */ -#define MX6UL_PAD_BOOT_MODE0__GPIO5_IO10 0x0014 0x02a0 0x0000 5 0 -#define MX6UL_PAD_BOOT_MODE1__GPIO5_IO11 0x0018 0x02a4 0x0000 5 0 +#define MX6UL_PAD_BOOT_MODE0__GPIO5_IO10 0x0014 0x02a0 0x0000 5 0 +#define MX6UL_PAD_BOOT_MODE1__GPIO5_IO11 0x0018 0x02a4 0x0000 5 0 -#define MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x001c 0x02a8 0x0000 5 0 -#define MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x0020 0x02ac 0x0000 5 0 -#define MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0024 0x02b0 0x0000 5 0 -#define MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0028 0x02b4 0x0000 5 0 -#define MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x002c 0x02b8 0x0000 5 0 -#define MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0030 0x02bc 0x0000 5 0 -#define MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0034 0x02c0 0x0000 5 0 -#define MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0038 0x02c4 0x0000 5 0 -#define MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x003c 0x02c8 0x0000 5 0 -#define MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x0040 0x02cc 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x001c 0x02a8 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x0020 0x02ac 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0024 0x02b0 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0028 0x02b4 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x002c 0x02b8 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0030 0x02bc 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0034 0x02c0 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0038 0x02c4 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x003c 0x02c8 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x0040 0x02cc 0x0000 5 0 -#define MX6UL_PAD_JTAG_MOD__SJC_MOD 0x0044 0x02d0 0x0000 0 0 -#define MX6UL_PAD_JTAG_MOD__GPT2_CLK 0x0044 0x02d0 0x05a0 1 0 -#define MX6UL_PAD_JTAG_MOD__SPDIF_OUT 0x0044 0x02d0 0x0000 2 0 -#define MX6UL_PAD_JTAG_MOD__ENET1_REF_CLK_25M 0x0044 0x02d0 0x0000 3 0 -#define MX6UL_PAD_JTAG_MOD__CCM_PMIC_RDY 0x0044 0x02d0 0x04c0 4 0 -#define MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x0044 0x02d0 0x0000 5 0 -#define MX6UL_PAD_JTAG_MOD__SDMA_EXT_EVENT00 0x0044 0x02d0 0x0000 6 0 -#define MX6UL_PAD_JTAG_TMS__SJC_TMS 0x0048 0x02d4 0x0000 0 0 -#define MX6UL_PAD_JTAG_TMS__GPT2_CAPTURE1 0x0048 0x02d4 0x0598 1 0 -#define MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x0048 0x02d4 0x0000 2 0 -#define MX6UL_PAD_JTAG_TMS__CCM_CLKO1 0x0048 0x02d4 0x0000 3 0 -#define MX6UL_PAD_JTAG_TMS__CCM_WAIT 0x0048 0x02d4 0x0000 4 0 -#define MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x0048 0x02d4 0x0000 5 0 -#define MX6UL_PAD_JTAG_TMS__SDMA_EXT_EVENT01 0x0048 0x02d4 0x0000 6 0 -#define MX6UL_PAD_JTAG_TMS__EPIT1_OUT 0x0048 0x02d4 0x0000 8 0 -#define MX6UL_PAD_JTAG_TDO__SJC_TDO 0x004c 0x02d8 0x0000 0 0 -#define MX6UL_PAD_JTAG_TDO__GPT2_CAPTURE2 0x004c 0x02d8 0x059c 1 0 -#define MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x004c 0x02d8 0x05fc 2 0 -#define MX6UL_PAD_JTAG_TDO__CCM_CLKO2 0x004c 0x02d8 0x0000 3 0 -#define MX6UL_PAD_JTAG_TDO__CCM_STOP 0x004c 0x02d8 0x0000 4 0 -#define MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x004c 0x02d8 0x0000 5 0 -#define MX6UL_PAD_JTAG_TDO__MQS_RIGHT 0x004c 0x02d8 0x0000 6 0 -#define MX6UL_PAD_JTAG_TDO__EPIT2_OUT 0x004c 0x02d8 0x0000 8 0 -#define MX6UL_PAD_JTAG_TDI__SJC_TDI 0x0050 0x02dc 0x0000 0 0 -#define MX6UL_PAD_JTAG_TDI__GPT2_COMPARE1 0x0050 0x02dc 0x0000 1 0 -#define MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x0050 0x02dc 0x05f8 2 0 -#define MX6UL_PAD_JTAG_TDI__PWM6_OUT 0x0050 0x02dc 0x0000 4 0 -#define MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x0050 0x02dc 0x0000 5 0 -#define MX6UL_PAD_JTAG_TDI__MQS_LEFT 0x0050 0x02dc 0x0000 6 0 -#define MX6UL_PAD_JTAG_TDI__SIM1_POWER_FAIL 0x0050 0x02dc 0x0000 8 0 -#define MX6UL_PAD_JTAG_TCK__SJC_TCK 0x0054 0x02e0 0x0000 0 0 -#define MX6UL_PAD_JTAG_TCK__GPT2_COMPARE2 0x0054 0x02e0 0x0000 1 0 -#define MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x0054 0x02e0 0x0000 2 0 -#define MX6UL_PAD_JTAG_TCK__PWM7_OUT 0x0054 0x02e0 0x0000 4 0 -#define MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x0054 0x02e0 0x0000 5 0 -#define MX6UL_PAD_JTAG_TCK__SIM2_POWER_FAIL 0x0054 0x02e0 0x0000 8 0 -#define MX6UL_PAD_JTAG_TRST_B__SJC_TRSTB 0x0058 0x02e4 0x0000 0 0 -#define MX6UL_PAD_JTAG_TRST_B__GPT2_COMPARE3 0x0058 0x02e4 0x0000 1 0 -#define MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x0058 0x02e4 0x0000 2 0 -#define MX6UL_PAD_JTAG_TRST_B__PWM8_OUT 0x0058 0x02e4 0x0000 4 0 -#define MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x0058 0x02e4 0x0000 5 0 -#define MX6UL_PAD_JTAG_TRST_B__CAAM_RNG_OSC_OBS 0x0058 0x02e4 0x0000 8 0 -#define MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x005c 0x02e8 0x05ac 0 1 -#define MX6UL_PAD_GPIO1_IO00__GPT1_CAPTURE1 0x005c 0x02e8 0x058c 1 0 -#define MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x005c 0x02e8 0x04b8 2 0 -#define MX6UL_PAD_GPIO1_IO00__ENET1_REF_CLK1 0x005c 0x02e8 0x0574 3 0 -#define MX6UL_PAD_GPIO1_IO00__MQS_RIGHT 0x005c 0x02e8 0x0000 4 0 -#define MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0x005c 0x02e8 0x0000 5 0 -#define MX6UL_PAD_GPIO1_IO00__ENET1_1588_EVENT0_IN 0x005c 0x02e8 0x0000 6 0 -#define MX6UL_PAD_GPIO1_IO00__SRC_SYSTEM_RESET 0x005c 0x02e8 0x0000 7 0 -#define MX6UL_PAD_GPIO1_IO00__WDOG3_WDOG_B 0x005c 0x02e8 0x0000 8 0 -#define MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x0060 0x02ec 0x05b0 0 1 -#define MX6UL_PAD_GPIO1_IO01__GPT1_COMPARE1 0x0060 0x02ec 0x0000 1 0 -#define MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x0060 0x02ec 0x0664 2 0 -#define MX6UL_PAD_GPIO1_IO01__ENET2_REF_CLK2 0x0060 0x02ec 0x057c 3 0 -#define MX6UL_PAD_GPIO1_IO01__MQS_LEFT 0x0060 0x02ec 0x0000 4 0 -#define MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x0060 0x02ec 0x0000 5 0 -#define MX6UL_PAD_GPIO1_IO01__ENET1_1588_EVENT0_OUT 0x0060 0x02ec 0x0000 6 0 -#define MX6UL_PAD_GPIO1_IO01__SRC_EARLY_RESET 0x0060 0x02ec 0x0000 7 0 -#define MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B 0x0060 0x02ec 0x0000 8 0 -#define MX6UL_PAD_GPIO1_IO02__I2C1_SCL 0x0064 0x02f0 0x05a4 0 0 -#define MX6UL_PAD_GPIO1_IO02__GPT1_COMPARE2 0x0064 0x02f0 0x0000 1 0 -#define MX6UL_PAD_GPIO1_IO02__USB_OTG2_PWR 0x0064 0x02f0 0x0000 2 0 -#define MX6UL_PAD_GPIO1_IO02__ENET1_REF_CLK_25M 0x0064 0x02f0 0x0000 3 0 -#define MX6UL_PAD_GPIO1_IO02__USDHC1_WP 0x0064 0x02f0 0x066c 4 0 -#define MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x0064 0x02f0 0x0000 5 0 -#define MX6UL_PAD_GPIO1_IO02__SDMA_EXT_EVENT00 0x0064 0x02f0 0x0000 6 0 -#define MX6UL_PAD_GPIO1_IO02__SRC_ANY_PU_RESET 0x0064 0x02f0 0x0000 7 0 -#define MX6UL_PAD_GPIO1_IO02__UART1_DCE_TX 0x0064 0x02f0 0x0000 8 0 -#define MX6UL_PAD_GPIO1_IO02__UART1_DTE_RX 0x0064 0x02f0 0x0624 8 0 -#define MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x0068 0x02f4 0x05a8 0 1 -#define MX6UL_PAD_GPIO1_IO03__GPT1_COMPARE3 0x0068 0x02f4 0x0000 1 0 -#define MX6UL_PAD_GPIO1_IO03__USB_OTG2_OC 0x0068 0x02f4 0x0660 2 0 -#define MX6UL_PAD_GPIO1_IO03__USDHC1_CD_B 0x0068 0x02f4 0x0668 4 0 -#define MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x0068 0x02f4 0x0000 5 0 -#define MX6UL_PAD_GPIO1_IO03__CCM_DI0_eXT_CLK 0x0068 0x02f4 0x0000 6 0 -#define MX6UL_PAD_GPIO1_IO03__SRC_TESTER_ACK 0x0068 0x02f4 0x0000 7 0 -#define MX6UL_PAD_GPIO1_IO03__UART1_DTE_TX 0x0068 0x02f4 0x0000 8 0 -#define MX6UL_PAD_GPIO1_IO03__UART1_DCE_RX 0x0068 0x02f4 0x0624 8 1 -#define MX6UL_PAD_GPIO1_IO04__ENET1_REF_CLK1 0x006c 0x02f8 0x0574 0 1 -#define MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x006c 0x02f8 0x0000 1 0 -#define MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR 0x006c 0x02f8 0x0000 2 0 -#define MX6UL_PAD_GPIO1_IO04__USDHC1_RESET_B 0x006c 0x02f8 0x0000 4 0 -#define MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x006c 0x02f8 0x0000 5 0 -#define MX6UL_PAD_GPIO1_IO04__ENET2_1588_EVENT0_IN 0x006c 0x02f8 0x0000 6 0 -#define MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX 0x006c 0x02f8 0x0000 8 0 -#define MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX 0x006c 0x02f8 0x0644 8 2 -#define MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2 0x0070 0x02fc 0x057c 0 1 -#define MX6UL_PAD_GPIO1_IO05__PWM4_OUT 0x0070 0x02fc 0x0000 1 0 -#define MX6UL_PAD_GPIO1_IO05__ANATOP_OTG2_ID 0x0070 0x02fc 0x04bc 2 0 -#define MX6UL_PAD_GPIO1_IO05__CSI_FIELD 0x0070 0x02fc 0x0530 3 0 -#define MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x0070 0x02fc 0x0000 4 0 -#define MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x0070 0x02fc 0x0000 5 0 -#define MX6UL_PAD_GPIO1_IO05__ENET2_1588_EVENT0_OUT 0x0070 0x02fc 0x0000 6 0 -#define MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX 0x0070 0x02fc 0x0644 8 3 -#define MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX 0x0070 0x02fc 0x0000 8 0 -#define MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x0074 0x0300 0x0578 0 0 -#define MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x0074 0x0300 0x0580 1 0 -#define MX6UL_PAD_GPIO1_IO06__USB_OTG_PWR_WAKE 0x0074 0x0300 0x0000 2 0 -#define MX6UL_PAD_GPIO1_IO06__CSI_MCLK 0x0074 0x0300 0x0000 3 0 -#define MX6UL_PAD_GPIO1_IO06__USDHC2_WP 0x0074 0x0300 0x069c 4 0 -#define MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x0074 0x0300 0x0000 5 0 -#define MX6UL_PAD_GPIO1_IO06__CCM_WAIT 0x0074 0x0300 0x0000 6 0 -#define MX6UL_PAD_GPIO1_IO06__CCM_REF_EN_B 0x0074 0x0300 0x0000 7 0 -#define MX6UL_PAD_GPIO1_IO06__UART1_DCE_CTS 0x0074 0x0300 0x0000 8 0 -#define MX6UL_PAD_GPIO1_IO06__UART1_DTE_RTS 0x0074 0x0300 0x0620 8 0 -#define MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x0078 0x0304 0x0000 0 0 -#define MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x0078 0x0304 0x0000 1 0 -#define MX6UL_PAD_GPIO1_IO07__USB_OTG_HOST_MODE 0x0078 0x0304 0x0000 2 0 -#define MX6UL_PAD_GPIO1_IO07__CSI_PIXCLK 0x0078 0x0304 0x0528 3 0 -#define MX6UL_PAD_GPIO1_IO07__USDHC2_CD_B 0x0078 0x0304 0x0674 4 1 -#define MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x0078 0x0304 0x0000 5 0 -#define MX6UL_PAD_GPIO1_IO07__CCM_STOP 0x0078 0x0304 0x0000 6 0 -#define MX6UL_PAD_GPIO1_IO07__UART1_DCE_RTS 0x0078 0x0304 0x0620 8 1 -#define MX6UL_PAD_GPIO1_IO07__UART1_DTE_CTS 0x0078 0x0304 0x0000 8 0 -#define MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x007c 0x0308 0x0000 0 0 -#define MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x007c 0x0308 0x0000 1 0 -#define MX6UL_PAD_GPIO1_IO08__SPDIF_OUT 0x007c 0x0308 0x0000 2 0 -#define MX6UL_PAD_GPIO1_IO08__CSI_VSYNC 0x007c 0x0308 0x052c 3 1 -#define MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT 0x007c 0x0308 0x0000 4 0 -#define MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x007c 0x0308 0x0000 5 0 -#define MX6UL_PAD_GPIO1_IO08__CCM_PMIC_RDY 0x007c 0x0308 0x04c0 6 1 -#define MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x007c 0x0308 0x0640 8 1 -#define MX6UL_PAD_GPIO1_IO08__UART5_DTE_CTS 0x007c 0x0308 0x0000 8 0 -#define MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0x0080 0x030c 0x0000 0 0 -#define MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x0080 0x030c 0x0000 1 0 -#define MX6UL_PAD_GPIO1_IO09__SPDIF_IN 0x0080 0x030c 0x0618 2 0 -#define MX6UL_PAD_GPIO1_IO09__CSI_HSYNC 0x0080 0x030c 0x0524 3 1 -#define MX6UL_PAD_GPIO1_IO09__USDHC2_RESET_B 0x0080 0x030c 0x0000 4 0 -#define MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0080 0x030c 0x0000 5 0 -#define MX6UL_PAD_GPIO1_IO09__USDHC1_RESET_B 0x0080 0x030c 0x0000 6 0 -#define MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x0080 0x030c 0x0000 8 0 -#define MX6UL_PAD_GPIO1_IO09__UART5_DTE_RTS 0x0080 0x030c 0x0640 8 2 -#define MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x0084 0x0310 0x0000 0 0 -#define MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX 0x0084 0x0310 0x0624 0 2 -#define MX6UL_PAD_UART1_TX_DATA__ENET1_RDATA02 0x0084 0x0310 0x0000 1 0 -#define MX6UL_PAD_UART1_TX_DATA__I2C3_SCL 0x0084 0x0310 0x05b4 2 0 -#define MX6UL_PAD_UART1_TX_DATA__CSI_DATA02 0x0084 0x0310 0x0000 3 0 -#define MX6UL_PAD_UART1_TX_DATA__GPT1_COMPARE1 0x0084 0x0310 0x0000 4 0 -#define MX6UL_PAD_UART1_TX_DATA__GPIO1_IO16 0x0084 0x0310 0x0000 5 0 -#define MX6UL_PAD_UART1_TX_DATA__SPDIF_OUT 0x0084 0x0310 0x0000 8 0 -#define MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x0088 0x0314 0x0624 0 3 -#define MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX 0x0088 0x0314 0x0000 0 0 -#define MX6UL_PAD_UART1_RX_DATA__ENET1_RDATA03 0x0088 0x0314 0x0000 1 0 -#define MX6UL_PAD_UART1_RX_DATA__I2C3_SDA 0x0088 0x0314 0x05b8 2 0 -#define MX6UL_PAD_UART1_RX_DATA__CSI_DATA03 0x0088 0x0314 0x0000 3 0 -#define MX6UL_PAD_UART1_RX_DATA__GPT1_CLK 0x0088 0x0314 0x0594 4 0 -#define MX6UL_PAD_UART1_RX_DATA__GPIO1_IO17 0x0088 0x0314 0x0000 5 0 -#define MX6UL_PAD_UART1_RX_DATA__SPDIF_IN 0x0088 0x0314 0x0000 8 0 -#define MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS 0x008c 0x0318 0x0000 0 0 -#define MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS 0x008c 0x0318 0x0620 0 2 -#define MX6UL_PAD_UART1_CTS_B__ENET1_RX_CLK 0x008c 0x0318 0x0000 1 0 -#define MX6UL_PAD_UART1_CTS_B__USDHC1_WP 0x008c 0x0318 0x066c 2 1 -#define MX6UL_PAD_UART1_CTS_B__CSI_DATA04 0x008c 0x0318 0x0000 3 0 -#define MX6UL_PAD_UART1_CTS_B__ENET2_1588_EVENT1_IN 0x008c 0x0318 0x0000 4 0 -#define MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x008c 0x0318 0x0000 5 0 -#define MX6UL_PAD_UART1_CTS_B__USDHC2_WP 0x008c 0x0318 0x0000 8 0 -#define MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS 0x0090 0x031c 0x0620 0 3 -#define MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS 0x0090 0x031c 0x0000 0 0 -#define MX6UL_PAD_UART1_RTS_B__ENET1_TX_ER 0x0090 0x031c 0x0000 1 0 -#define MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B 0x0090 0x031c 0x0668 2 1 -#define MX6UL_PAD_UART1_RTS_B__CSI_DATA05 0x0090 0x031c 0x0000 3 0 -#define MX6UL_PAD_UART1_RTS_B__ENET2_1588_EVENT1_OUT 0x0090 0x031c 0x0000 4 0 -#define MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0090 0x031c 0x0000 5 0 -#define MX6UL_PAD_UART1_RTS_B__USDHC2_CD_B 0x0090 0x031c 0x0000 8 0 -#define MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x0094 0x0320 0x0000 0 0 -#define MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x0094 0x0320 0x062c 0 0 -#define MX6UL_PAD_UART2_TX_DATA__ENET1_TDATA02 0x0094 0x0320 0x0000 1 0 -#define MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x0094 0x0320 0x05bc 2 0 -#define MX6UL_PAD_UART2_TX_DATA__CSI_DATA06 0x0094 0x0320 0x0000 3 0 -#define MX6UL_PAD_UART2_TX_DATA__GPT1_CAPTURE1 0x0094 0x0320 0x058c 4 1 -#define MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x0094 0x0320 0x0000 5 0 -#define MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0 0x0094 0x0320 0x0000 8 0 -#define MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0098 0x0324 0x062c 0 1 -#define MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x0098 0x0324 0x0000 0 0 -#define MX6UL_PAD_UART2_RX_DATA__ENET1_TDATA03 0x0098 0x0324 0x0000 1 0 -#define MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x0098 0x0324 0x05c0 2 0 -#define MX6UL_PAD_UART2_RX_DATA__CSI_DATA07 0x0098 0x0324 0x0000 3 0 -#define MX6UL_PAD_UART2_RX_DATA__GPT1_CAPTURE2 0x0098 0x0324 0x0590 4 0 -#define MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x0098 0x0324 0x0000 5 0 -#define MX6UL_PAD_UART2_RX_DATA__SJC_DONE 0x0098 0x0324 0x0000 7 0 -#define MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x0098 0x0324 0x0000 8 0 -#define MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x009c 0x0328 0x0000 0 0 -#define MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS 0x009c 0x0328 0x0628 0 0 -#define MX6UL_PAD_UART2_CTS_B__ENET1_CRS 0x009c 0x0328 0x0000 1 0 -#define MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x009c 0x0328 0x0000 2 0 -#define MX6UL_PAD_UART2_CTS_B__CSI_DATA08 0x009c 0x0328 0x0000 3 0 -#define MX6UL_PAD_UART2_CTS_B__GPT1_COMPARE2 0x009c 0x0328 0x0000 4 0 -#define MX6UL_PAD_UART2_CTS_B__GPIO1_IO22 0x009c 0x0328 0x0000 5 0 -#define MX6UL_PAD_UART2_CTS_B__SJC_DE_B 0x009c 0x0328 0x0000 7 0 -#define MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x009c 0x0328 0x0000 8 0 -#define MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x00a0 0x032c 0x0628 0 1 -#define MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS 0x00a0 0x032c 0x0000 0 0 -#define MX6UL_PAD_UART2_RTS_B__ENET1_COL 0x00a0 0x032c 0x0000 1 0 -#define MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x00a0 0x032c 0x0588 2 0 -#define MX6UL_PAD_UART2_RTS_B__CSI_DATA09 0x00a0 0x032c 0x0000 3 0 -#define MX6UL_PAD_UART2_RTS_B__GPT1_COMPARE3 0x00a0 0x032c 0x0000 4 0 -#define MX6UL_PAD_UART2_RTS_B__GPIO1_IO23 0x00a0 0x032c 0x0000 5 0 -#define MX6UL_PAD_UART2_RTS_B__SJC_FAIL 0x00a0 0x032c 0x0000 7 0 -#define MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x00a0 0x032c 0x0000 8 0 -#define MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x00a4 0x0330 0x0000 0 0 -#define MX6UL_PAD_UART3_TX_DATA__UART3_DTE_RX 0x00a4 0x0330 0x0634 0 0 -#define MX6UL_PAD_UART3_TX_DATA__ENET2_RDATA02 0x00a4 0x0330 0x0000 1 0 -#define MX6UL_PAD_UART3_TX_DATA__SIM1_PORT0_PD 0x00a4 0x0330 0x0000 2 0 -#define MX6UL_PAD_UART3_TX_DATA__CSI_DATA01 0x00a4 0x0330 0x0000 3 0 -#define MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x00a4 0x0330 0x0000 4 0 -#define MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS 0x00a4 0x0330 0x0628 4 2 -#define MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x00a4 0x0330 0x0000 5 0 -#define MX6UL_PAD_UART3_TX_DATA__SJC_JTAG_ACT 0x00a4 0x0330 0x0000 7 0 -#define MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID 0x00a4 0x0330 0x0000 8 0 -#define MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x00a8 0x0334 0x0634 0 1 -#define MX6UL_PAD_UART3_RX_DATA__UART3_DTE_TX 0x00a8 0x0334 0x0000 0 0 -#define MX6UL_PAD_UART3_RX_DATA__ENET2_RDATA03 0x00a8 0x0334 0x0000 1 0 -#define MX6UL_PAD_UART3_RX_DATA__SIM2_PORT0_PD 0x00a8 0x0334 0x0000 2 0 -#define MX6UL_PAD_UART3_RX_DATA__CSI_DATA00 0x00a8 0x0334 0x0000 3 0 -#define MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x00a8 0x0334 0x0628 4 3 -#define MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS 0x00a8 0x0334 0x0000 4 0 -#define MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x00a8 0x0334 0x0000 5 0 -#define MX6UL_PAD_UART3_RX_DATA__EPIT1_OUT 0x00a8 0x0334 0x0000 8 0 -#define MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x00ac 0x0338 0x0000 0 0 -#define MX6UL_PAD_UART3_CTS_B__UART3_DTE_RTS 0x00ac 0x0338 0x0630 0 0 -#define MX6UL_PAD_UART3_CTS_B__ENET2_RX_CLK 0x00ac 0x0338 0x0000 1 0 -#define MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x00ac 0x0338 0x0000 2 0 -#define MX6UL_PAD_UART3_CTS_B__CSI_DATA10 0x00ac 0x0338 0x0000 3 0 -#define MX6UL_PAD_UART3_CTS_B__ENET1_1588_EVENT1_IN 0x00ac 0x0338 0x0000 4 0 -#define MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x00ac 0x0338 0x0000 5 0 -#define MX6UL_PAD_UART3_CTS_B__EPIT2_OUT 0x00ac 0x0338 0x0000 8 0 -#define MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x00b0 0x033c 0x0630 0 1 -#define MX6UL_PAD_UART3_RTS_B__UART3_DTE_CTS 0x00b0 0x033c 0x0000 0 0 -#define MX6UL_PAD_UART3_RTS_B__ENET2_TX_ER 0x00b0 0x033c 0x0000 1 0 -#define MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x00b0 0x033c 0x0584 2 0 -#define MX6UL_PAD_UART3_RTS_B__CSI_DATA11 0x00b0 0x033c 0x0000 3 0 -#define MX6UL_PAD_UART3_RTS_B__ENET1_1588_EVENT1_OUT 0x00b0 0x033c 0x0000 4 0 -#define MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x00b0 0x033c 0x0000 5 0 -#define MX6UL_PAD_UART3_RTS_B__WDOG1_WDOG_B 0x00b0 0x033c 0x0000 8 0 -#define MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x00b4 0x0340 0x0000 0 0 -#define MX6UL_PAD_UART4_TX_DATA__UART4_DTE_RX 0x00b4 0x0340 0x063c 0 0 -#define MX6UL_PAD_UART4_TX_DATA__ENET2_TDATA02 0x00b4 0x0340 0x0000 1 0 -#define MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x00b4 0x0340 0x05a4 2 1 -#define MX6UL_PAD_UART4_TX_DATA__CSI_DATA12 0x00b4 0x0340 0x0000 3 0 -#define MX6UL_PAD_UART4_TX_DATA__CSU_CSU_ALARM_AUT02 0x00b4 0x0340 0x0000 4 0 -#define MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x00b4 0x0340 0x0000 5 0 -#define MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x00b4 0x0340 0x0000 8 0 -#define MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x00b8 0x0344 0x063c 0 1 -#define MX6UL_PAD_UART4_RX_DATA__UART4_DTE_TX 0x00b8 0x0344 0x0000 0 0 -#define MX6UL_PAD_UART4_RX_DATA__ENET2_TDATA03 0x00b8 0x0344 0x0000 1 0 -#define MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x00b8 0x0344 0x05a8 2 2 -#define MX6UL_PAD_UART4_RX_DATA__CSI_DATA13 0x00b8 0x0344 0x0000 3 0 -#define MX6UL_PAD_UART4_RX_DATA__CSU_CSU_ALARM_AUT01 0x00b8 0x0344 0x0000 4 0 -#define MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x00b8 0x0344 0x0000 5 0 -#define MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0 0x00b8 0x0344 0x0000 8 0 -#define MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x00bc 0x0348 0x0000 5 0 -#define MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x00bc 0x0348 0x0000 8 0 -#define MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x00bc 0x0348 0x0000 0 0 -#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00bc 0x0348 0x0644 0 4 -#define MX6UL_PAD_UART5_TX_DATA__ENET2_CRS 0x00bc 0x0348 0x0000 1 0 -#define MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x00bc 0x0348 0x05ac 2 2 -#define MX6UL_PAD_UART5_TX_DATA__CSI_DATA14 0x00bc 0x0348 0x0000 3 0 -#define MX6UL_PAD_UART5_TX_DATA__CSU_CSU_ALARM_AUT00 0x00bc 0x0348 0x0000 4 0 -#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00c0 0x034c 0x0644 0 5 -#define MX6UL_PAD_UART5_RX_DATA__UART5_DTE_TX 0x00c0 0x034c 0x0000 0 0 -#define MX6UL_PAD_UART5_RX_DATA__ENET2_COL 0x00c0 0x034c 0x0000 1 0 -#define MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x00c0 0x034c 0x05b0 2 2 -#define MX6UL_PAD_UART5_RX_DATA__CSI_DATA15 0x00c0 0x034c 0x0000 3 0 -#define MX6UL_PAD_UART5_RX_DATA__CSU_CSU_INT_DEB 0x00c0 0x034c 0x0000 4 0 -#define MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x00c0 0x034c 0x0000 5 0 -#define MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x00c0 0x034c 0x0000 8 0 -#define MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x00c4 0x0350 0x0000 0 0 -#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DCE_RTS 0x00c4 0x0350 0x0638 1 0 -#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DTE_CTS 0x00c4 0x0350 0x0000 1 0 -#define MX6UL_PAD_ENET1_RX_DATA0__PWM1_OUT 0x00c4 0x0350 0x0000 2 0 -#define MX6UL_PAD_ENET1_RX_DATA0__CSI_DATA16 0x00c4 0x0350 0x0000 3 0 -#define MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x00c4 0x0350 0x0000 4 0 -#define MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0x00c4 0x0350 0x0000 5 0 -#define MX6UL_PAD_ENET1_RX_DATA0__KPP_ROW00 0x00c4 0x0350 0x0000 6 0 -#define MX6UL_PAD_ENET1_RX_DATA0__USDHC1_LCTL 0x00c4 0x0350 0x0000 8 0 -#define MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x00c8 0x0354 0x0000 0 0 -#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DCE_CTS 0x00c8 0x0354 0x0000 1 0 -#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DTE_RTS 0x00c8 0x0354 0x0638 1 1 -#define MX6UL_PAD_ENET1_RX_DATA1__PWM2_OUT 0x00c8 0x0354 0x0000 2 0 -#define MX6UL_PAD_ENET1_RX_DATA1__CSI_DATA17 0x00c8 0x0354 0x0000 3 0 -#define MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x00c8 0x0354 0x0584 4 1 -#define MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0x00c8 0x0354 0x0000 5 0 -#define MX6UL_PAD_ENET1_RX_DATA1__KPP_COL00 0x00c8 0x0354 0x0000 6 0 -#define MX6UL_PAD_ENET1_RX_DATA1__USDHC2_LCTL 0x00c8 0x0354 0x0000 8 0 -#define MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x00cc 0x0358 0x0000 0 0 -#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00cc 0x0358 0x0640 1 3 -#define MX6UL_PAD_ENET1_RX_EN__UART5_DTE_CTS 0x00cc 0x0358 0x0000 1 0 -#define MX6UL_PAD_ENET1_RX_EN__CSI_DATA18 0x00cc 0x0358 0x0000 3 0 -#define MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x00cc 0x0358 0x0000 4 0 -#define MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02 0x00cc 0x0358 0x0000 5 0 -#define MX6UL_PAD_ENET1_RX_EN__KPP_ROW01 0x00cc 0x0358 0x0000 6 0 -#define MX6UL_PAD_ENET1_RX_EN__USDHC1_VSELECT 0x00cc 0x0358 0x0000 8 0 -#define MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x00d0 0x035c 0x0000 0 0 -#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DCE_CTS 0x00d0 0x035c 0x0000 1 0 -#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00d0 0x035c 0x0640 1 4 -#define MX6UL_PAD_ENET1_TX_DATA0__CSI_DATA19 0x00d0 0x035c 0x0000 3 0 -#define MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x00d0 0x035c 0x0588 4 1 -#define MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x00d0 0x035c 0x0000 5 0 -#define MX6UL_PAD_ENET1_TX_DATA0__KPP_COL01 0x00d0 0x035c 0x0000 6 0 -#define MX6UL_PAD_ENET1_TX_DATA0__USDHC2_VSELECT 0x00d0 0x035c 0x0000 8 0 -#define MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x00d4 0x0360 0x0000 0 0 -#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DCE_CTS 0x00d4 0x0360 0x0000 1 0 -#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DTE_RTS 0x00d4 0x0360 0x0648 1 2 -#define MX6UL_PAD_ENET1_TX_DATA1__PWM5_OUT 0x00d4 0x0360 0x0000 2 0 -#define MX6UL_PAD_ENET1_TX_DATA1__CSI_DATA20 0x00d4 0x0360 0x0000 3 0 -#define MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO 0x00d4 0x0360 0x0580 4 1 -#define MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0x00d4 0x0360 0x0000 5 0 -#define MX6UL_PAD_ENET1_TX_DATA1__KPP_ROW02 0x00d4 0x0360 0x0000 6 0 -#define MX6UL_PAD_ENET1_TX_DATA1__WDOG1_WDOG_RST_B_DEB 0x00d4 0x0360 0x0000 8 0 -#define MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x00d8 0x0364 0x0000 0 0 -#define MX6UL_PAD_ENET1_TX_EN__UART6_DCE_RTS 0x00d8 0x0364 0x0648 1 3 -#define MX6UL_PAD_ENET1_TX_EN__UART6_DTE_CTS 0x00d8 0x0364 0x0000 1 0 -#define MX6UL_PAD_ENET1_TX_EN__PWM6_OUT 0x00d8 0x0364 0x0000 2 0 -#define MX6UL_PAD_ENET1_TX_EN__CSI_DATA21 0x00d8 0x0364 0x0000 3 0 -#define MX6UL_PAD_ENET1_TX_EN__ENET2_MDC 0x00d8 0x0364 0x0000 4 0 -#define MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05 0x00d8 0x0364 0x0000 5 0 -#define MX6UL_PAD_ENET1_TX_EN__KPP_COL02 0x00d8 0x0364 0x0000 6 0 -#define MX6UL_PAD_ENET1_TX_EN__WDOG2_WDOG_RST_B_DEB 0x00d8 0x0364 0x0000 8 0 -#define MX6UL_PAD_ENET1_TX_CLK__ENET1_TX_CLK 0x00dc 0x0368 0x0000 0 0 -#define MX6UL_PAD_ENET1_TX_CLK__UART7_DCE_CTS 0x00dc 0x0368 0x0000 1 0 -#define MX6UL_PAD_ENET1_TX_CLK__UART7_DTE_RTS 0x00dc 0x0368 0x0650 1 0 -#define MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x00dc 0x0368 0x0000 2 0 -#define MX6UL_PAD_ENET1_TX_CLK__CSI_DATA22 0x00dc 0x0368 0x0000 3 0 -#define MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x00dc 0x0368 0x0574 4 2 -#define MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06 0x00dc 0x0368 0x0000 5 0 -#define MX6UL_PAD_ENET1_TX_CLK__KPP_ROW03 0x00dc 0x0368 0x0000 6 0 -#define MX6UL_PAD_ENET1_TX_CLK__GPT1_CLK 0x00dc 0x0368 0x0000 8 0 -#define MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x00e0 0x036c 0x0000 0 0 -#define MX6UL_PAD_ENET1_RX_ER__UART7_DCE_RTS 0x00e0 0x036c 0x0650 1 1 -#define MX6UL_PAD_ENET1_RX_ER__UART7_DTE_CTS 0x00e0 0x036c 0x0000 1 0 -#define MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x00e0 0x036c 0x0000 2 0 -#define MX6UL_PAD_ENET1_RX_ER__CSI_DATA23 0x00e0 0x036c 0x0000 3 0 -#define MX6UL_PAD_ENET1_RX_ER__EIM_CRE 0x00e0 0x036c 0x0000 4 0 -#define MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07 0x00e0 0x036c 0x0000 5 0 -#define MX6UL_PAD_ENET1_RX_ER__KPP_COL03 0x00e0 0x036c 0x0000 6 0 -#define MX6UL_PAD_ENET1_RX_ER__GPT1_CAPTURE2 0x00e0 0x036c 0x0000 8 0 -#define MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x00e4 0x0370 0x0000 0 0 -#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX 0x00e4 0x0370 0x0000 1 0 -#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DTE_RX 0x00e4 0x0370 0x064c 1 1 -#define MX6UL_PAD_ENET2_RX_DATA0__SIM1_PORT0_TRXD 0x00e4 0x0370 0x0000 2 0 -#define MX6UL_PAD_ENET2_RX_DATA0__I2C3_SCL 0x00e4 0x0370 0x05b4 3 1 -#define MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO 0x00e4 0x0370 0x0578 4 1 -#define MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x00e4 0x0370 0x0000 5 0 -#define MX6UL_PAD_ENET2_RX_DATA0__KPP_ROW04 0x00e4 0x0370 0x0000 6 0 -#define MX6UL_PAD_ENET2_RX_DATA0__USB_OTG1_PWR 0x00e4 0x0370 0x0000 8 0 -#define MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x00e8 0x0374 0x0000 0 0 -#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX 0x00e8 0x0374 0x064c 1 2 -#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DTE_TX 0x00e8 0x0374 0x0000 1 0 -#define MX6UL_PAD_ENET2_RX_DATA1__SIM1_PORT0_cLK 0x00e8 0x0374 0x0000 2 0 -#define MX6UL_PAD_ENET2_RX_DATA1__I2C3_SDA 0x00e8 0x0374 0x05b8 3 1 -#define MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC 0x00e8 0x0374 0x0000 4 0 -#define MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x00e8 0x0374 0x0000 5 0 -#define MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04 0x00e8 0x0374 0x0000 6 0 -#define MX6UL_PAD_ENET2_RX_DATA1__USB_OTG1_OC 0x00e8 0x0374 0x0000 8 0 -#define MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x00ec 0x0378 0x0000 0 0 -#define MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX 0x00ec 0x0378 0x0000 1 0 -#define MX6UL_PAD_ENET2_RX_EN__UART7_DTE_RX 0x00ec 0x0378 0x0654 1 0 -#define MX6UL_PAD_ENET2_RX_EN__SIM1_PORT0_RST_B 0x00ec 0x0378 0x0000 2 0 -#define MX6UL_PAD_ENET2_RX_EN__I2C4_SCL 0x00ec 0x0378 0x05bc 3 1 -#define MX6UL_PAD_ENET2_RX_EN__EIM_ADDR26 0x00ec 0x0378 0x0000 4 0 -#define MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x00ec 0x0378 0x0000 5 0 -#define MX6UL_PAD_ENET2_RX_EN__KPP_ROW05 0x00ec 0x0378 0x0000 6 0 -#define MX6UL_PAD_ENET2_RX_EN__ENET1_REF_CLK_25M 0x00ec 0x0378 0x0000 8 0 -#define MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x00f0 0x037c 0x0000 0 0 -#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX 0x00f0 0x037c 0x0654 1 1 -#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DTE_TX 0x00f0 0x037c 0x0000 1 0 -#define MX6UL_PAD_ENET2_TX_DATA0__SIM1_PORT0_SVEN 0x00f0 0x037c 0x0000 2 0 -#define MX6UL_PAD_ENET2_TX_DATA0__I2C4_SDA 0x00f0 0x037c 0x05c0 3 1 -#define MX6UL_PAD_ENET2_TX_DATA0__EIM_EB_B02 0x00f0 0x037c 0x0000 4 0 -#define MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x00f0 0x037c 0x0000 5 0 -#define MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05 0x00f0 0x037c 0x0000 6 0 -#define MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x00f4 0x0380 0x0000 0 0 -#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x00f4 0x0380 0x0000 1 0 -#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DTE_RX 0x00f4 0x0380 0x065c 1 0 -#define MX6UL_PAD_ENET2_TX_DATA1__SIM2_PORT0_TRXD 0x00f4 0x0380 0x0000 2 0 -#define MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK 0x00f4 0x0380 0x0564 3 0 -#define MX6UL_PAD_ENET2_TX_DATA1__EIM_EB_B03 0x00f4 0x0380 0x0000 4 0 -#define MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x00f4 0x0380 0x0000 5 0 -#define MX6UL_PAD_ENET2_TX_DATA1__KPP_ROW06 0x00f4 0x0380 0x0000 6 0 -#define MX6UL_PAD_ENET2_TX_DATA1__USB_OTG2_PWR 0x00f4 0x0380 0x0000 8 0 -#define MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x00f8 0x0384 0x0000 0 0 -#define MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x00f8 0x0384 0x065c 1 1 -#define MX6UL_PAD_ENET2_TX_EN__UART8_DTE_TX 0x00f8 0x0384 0x0000 1 0 -#define MX6UL_PAD_ENET2_TX_EN__SIM2_PORT0_cLK 0x00f8 0x0384 0x0000 2 0 -#define MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI 0x00f8 0x0384 0x056c 3 0 -#define MX6UL_PAD_ENET2_TX_EN__EIM_ACLK_FREERUN 0x00f8 0x0384 0x0000 4 0 -#define MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x00f8 0x0384 0x0000 5 0 -#define MX6UL_PAD_ENET2_TX_EN__KPP_COL06 0x00f8 0x0384 0x0000 6 0 -#define MX6UL_PAD_ENET2_TX_EN__USB_OTG2_OC 0x00f8 0x0384 0x0000 8 0 -#define MX6UL_PAD_ENET2_TX_CLK__ENET2_TX_CLK 0x00fc 0x0388 0x0000 0 0 -#define MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x00fc 0x0388 0x0000 1 0 -#define MX6UL_PAD_ENET2_TX_CLK__UART8_DTE_RTS 0x00fc 0x0388 0x0658 1 0 -#define MX6UL_PAD_ENET2_TX_CLK__SIM2_PORT0_RST_B 0x00fc 0x0388 0x0000 2 0 -#define MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO 0x00fc 0x0388 0x0568 3 0 -#define MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x00fc 0x0388 0x057c 4 2 -#define MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x00fc 0x0388 0x0000 5 0 -#define MX6UL_PAD_ENET2_TX_CLK__KPP_ROW07 0x00fc 0x0388 0x0000 6 0 -#define MX6UL_PAD_ENET2_TX_CLK__ANATOP_OTG2_ID 0x00fc 0x0388 0x0000 8 0 -#define MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x0100 0x038c 0x0000 0 0 -#define MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x0100 0x038c 0x0658 1 1 -#define MX6UL_PAD_ENET2_RX_ER__UART8_DTE_CTS 0x0100 0x038c 0x0000 1 0 -#define MX6UL_PAD_ENET2_RX_ER__SIM2_PORT0_SVEN 0x0100 0x038c 0x0000 2 0 -#define MX6UL_PAD_ENET2_RX_ER__ECSPI4_SS0 0x0100 0x038c 0x0000 3 0 -#define MX6UL_PAD_ENET2_RX_ER__EIM_ADDR25 0x0100 0x038c 0x0000 4 0 -#define MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x0100 0x038c 0x0000 5 0 -#define MX6UL_PAD_ENET2_RX_ER__KPP_COL07 0x0100 0x038c 0x0000 6 0 -#define MX6UL_PAD_ENET2_RX_ER__WDOG1_WDOG_ANY 0x0100 0x038c 0x0000 8 0 -#define MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x0104 0x0390 0x0000 0 0 -#define MX6UL_PAD_LCD_CLK__LCDIF_WR_RWN 0x0104 0x0390 0x0000 1 0 -#define MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x0104 0x0390 0x0000 2 0 -#define MX6UL_PAD_LCD_CLK__UART4_DTE_RX 0x0104 0x0390 0x063c 2 2 -#define MX6UL_PAD_LCD_CLK__SAI3_MCLK 0x0104 0x0390 0x0000 3 0 -#define MX6UL_PAD_LCD_CLK__EIM_CS2_B 0x0104 0x0390 0x0000 4 0 -#define MX6UL_PAD_LCD_CLK__GPIO3_IO00 0x0104 0x0390 0x0000 5 0 -#define MX6UL_PAD_LCD_CLK__WDOG1_WDOG_RST_B_DEB 0x0104 0x0390 0x0000 8 0 -#define MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x0108 0x0394 0x0000 0 0 -#define MX6UL_PAD_LCD_ENABLE__LCDIF_RD_E 0x0108 0x0394 0x0000 1 0 -#define MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX 0x0108 0x0394 0x063c 2 3 -#define MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX 0x0108 0x0394 0x0000 2 0 -#define MX6UL_PAD_LCD_ENABLE__SAI3_TX_SYNC 0x0108 0x0394 0x060c 3 0 -#define MX6UL_PAD_LCD_ENABLE__EIM_CS3_B 0x0108 0x0394 0x0000 4 0 -#define MX6UL_PAD_LCD_ENABLE__GPIO3_IO01 0x0108 0x0394 0x0000 5 0 -#define MX6UL_PAD_LCD_ENABLE__ECSPI2_RDY 0x0108 0x0394 0x0000 8 0 -#define MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x010c 0x0398 0x05dc 0 0 -#define MX6UL_PAD_LCD_HSYNC__LCDIF_RS 0x010c 0x0398 0x0000 1 0 -#define MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS 0x010c 0x0398 0x0000 2 0 -#define MX6UL_PAD_LCD_HSYNC__UART4_DTE_RTS 0x010c 0x0398 0x0638 2 2 -#define MX6UL_PAD_LCD_HSYNC__SAI3_TX_BCLK 0x010c 0x0398 0x0608 3 0 -#define MX6UL_PAD_LCD_HSYNC__WDOG3_WDOG_RST_B_DEB 0x010c 0x0398 0x0000 4 0 -#define MX6UL_PAD_LCD_HSYNC__GPIO3_IO02 0x010c 0x0398 0x0000 5 0 -#define MX6UL_PAD_LCD_HSYNC__ECSPI2_SS1 0x010c 0x0398 0x0000 8 0 -#define MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x0110 0x039c 0x0000 0 0 -#define MX6UL_PAD_LCD_VSYNC__LCDIF_BUSY 0x0110 0x039c 0x05dc 1 1 -#define MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS 0x0110 0x039c 0x0638 2 3 -#define MX6UL_PAD_LCD_VSYNC__UART4_DTE_CTS 0x0110 0x039c 0x0000 2 0 -#define MX6UL_PAD_LCD_VSYNC__SAI3_RX_DATA 0x0110 0x039c 0x0000 3 0 -#define MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B 0x0110 0x039c 0x0000 4 0 -#define MX6UL_PAD_LCD_VSYNC__GPIO3_IO03 0x0110 0x039c 0x0000 5 0 -#define MX6UL_PAD_LCD_VSYNC__ECSPI2_SS2 0x0110 0x039c 0x0000 8 0 -#define MX6UL_PAD_LCD_RESET__LCDIF_RESET 0x0114 0x03a0 0x0000 0 0 -#define MX6UL_PAD_LCD_RESET__LCDIF_CS 0x0114 0x03a0 0x0000 1 0 -#define MX6UL_PAD_LCD_RESET__CA7_MX6UL_EVENTI 0x0114 0x03a0 0x0000 2 0 -#define MX6UL_PAD_LCD_RESET__SAI3_TX_DATA 0x0114 0x03a0 0x0000 3 0 -#define MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x0114 0x03a0 0x0000 4 0 -#define MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0114 0x03a0 0x0000 5 0 -#define MX6UL_PAD_LCD_RESET__ECSPI2_SS3 0x0114 0x03a0 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x0118 0x03a4 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA00__PWM1_OUT 0x0118 0x03a4 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA00__ENET1_1588_EVENT2_IN 0x0118 0x03a4 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA00__I2C3_SDA 0x0118 0x03a4 0x05b8 4 2 -#define MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0x0118 0x03a4 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA00__SRC_BT_CFG00 0x0118 0x03a4 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA00__SAI1_MCLK 0x0118 0x03a4 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x011c 0x03a8 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA01__PWM2_OUT 0x011c 0x03a8 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA01__ENET1_1588_EVENT2_OUT 0x011c 0x03a8 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA01__I2C3_SCL 0x011c 0x03a8 0x05b4 4 2 -#define MX6UL_PAD_LCD_DATA01__GPIO3_IO06 0x011c 0x03a8 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA01__SRC_BT_CFG01 0x011c 0x03a8 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA01__SAI1_TX_SYNC 0x011c 0x03a8 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x0120 0x03ac 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA02__PWM3_OUT 0x0120 0x03ac 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA02__ENET1_1588_EVENT3_IN 0x0120 0x03ac 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA02__I2C4_SDA 0x0120 0x03ac 0x05c0 4 2 -#define MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0x0120 0x03ac 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA02__SRC_BT_CFG02 0x0120 0x03ac 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA02__SAI1_TX_BCLK 0x0120 0x03ac 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x0124 0x03b0 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA03__PWM4_OUT 0x0124 0x03b0 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA03__ENET1_1588_EVENT3_OUT 0x0124 0x03b0 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA03__I2C4_SCL 0x0124 0x03b0 0x05bc 4 2 -#define MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0x0124 0x03b0 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA03__SRC_BT_CFG03 0x0124 0x03b0 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA03__SAI1_RX_DATA 0x0124 0x03b0 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x0128 0x03b4 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA04__UART8_DCE_CTS 0x0128 0x03b4 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA04__UART8_DTE_RTS 0x0128 0x03b4 0x0658 1 2 -#define MX6UL_PAD_LCD_DATA04__ENET2_1588_EVENT2_IN 0x0128 0x03b4 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA04__SPDIF_SR_CLK 0x0128 0x03b4 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA04__GPIO3_IO09 0x0128 0x03b4 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA04__SRC_BT_CFG04 0x0128 0x03b4 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA04__SAI1_TX_DATA 0x0128 0x03b4 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x012c 0x03b8 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA05__UART8_DCE_RTS 0x012c 0x03b8 0x0658 1 3 -#define MX6UL_PAD_LCD_DATA05__UART8_DTE_CTS 0x012c 0x03b8 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA05__ENET2_1588_EVENT2_OUT 0x012c 0x03b8 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA05__SPDIF_OUT 0x012c 0x03b8 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x012c 0x03b8 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA05__SRC_BT_CFG05 0x012c 0x03b8 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA05__ECSPI1_SS1 0x012c 0x03b8 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x0130 0x03bc 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA06__UART7_DCE_CTS 0x0130 0x03bc 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA06__UART7_DTE_RTS 0x0130 0x03bc 0x0650 1 2 -#define MX6UL_PAD_LCD_DATA06__ENET2_1588_EVENT3_IN 0x0130 0x03bc 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA06__SPDIF_LOCK 0x0130 0x03bc 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x0130 0x03bc 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA06__SRC_BT_CFG06 0x0130 0x03bc 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA06__ECSPI1_SS2 0x0130 0x03bc 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x0134 0x03c0 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA07__UART7_DCE_RTS 0x0134 0x03c0 0x0650 1 3 -#define MX6UL_PAD_LCD_DATA07__UART7_DTE_CTS 0x0134 0x03c0 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA07__ENET2_1588_EVENT3_OUT 0x0134 0x03c0 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA07__SPDIF_EXT_CLK 0x0134 0x03c0 0x061c 4 0 -#define MX6UL_PAD_LCD_DATA07__GPIO3_IO12 0x0134 0x03c0 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA07__SRC_BT_CFG07 0x0134 0x03c0 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA07__ECSPI1_SS3 0x0134 0x03c0 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x0138 0x03c4 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA08__SPDIF_IN 0x0138 0x03c4 0x0618 1 2 -#define MX6UL_PAD_LCD_DATA08__CSI_DATA16 0x0138 0x03c4 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA08__EIM_DATA00 0x0138 0x03c4 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA08__GPIO3_IO13 0x0138 0x03c4 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA08__SRC_BT_CFG08 0x0138 0x03c4 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX 0x0138 0x03c4 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x013c 0x03c8 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA09__SAI3_MCLK 0x013c 0x03c8 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA09__CSI_DATA17 0x013c 0x03c8 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA09__EIM_DATA01 0x013c 0x03c8 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA09__GPIO3_IO14 0x013c 0x03c8 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA09__SRC_BT_CFG09 0x013c 0x03c8 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX 0x013c 0x03c8 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x0140 0x03cc 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA10__SAI3_RX_SYNC 0x0140 0x03cc 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA10__CSI_DATA18 0x0140 0x03cc 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA10__EIM_DATA02 0x0140 0x03cc 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA10__GPIO3_IO15 0x0140 0x03cc 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA10__SRC_BT_CFG10 0x0140 0x03cc 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX 0x0140 0x03cc 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x0144 0x03d0 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA11__SAI3_RX_BCLK 0x0144 0x03d0 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA11__CSI_DATA19 0x0144 0x03d0 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA11__EIM_DATA03 0x0144 0x03d0 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA11__GPIO3_IO16 0x0144 0x03d0 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA11__SRC_BT_CFG11 0x0144 0x03d0 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX 0x0144 0x03d0 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x0148 0x03d4 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA12__SAI3_TX_SYNC 0x0148 0x03d4 0x060c 1 1 -#define MX6UL_PAD_LCD_DATA12__CSI_DATA20 0x0148 0x03d4 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA12__EIM_DATA04 0x0148 0x03d4 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x0148 0x03d4 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA12__SRC_BT_CFG12 0x0148 0x03d4 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA12__ECSPI1_RDY 0x0148 0x03d4 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x014c 0x03d8 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA13__SAI3_TX_BCLK 0x014c 0x03d8 0x0608 1 1 -#define MX6UL_PAD_LCD_DATA13__CSI_DATA21 0x014c 0x03d8 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA13__EIM_DATA05 0x014c 0x03d8 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA13__GPIO3_IO18 0x014c 0x03d8 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA13__SRC_BT_CFG13 0x014c 0x03d8 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA13__USDHC2_RESET_B 0x014c 0x03d8 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x0150 0x03dc 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA14__SAI3_RX_DATA 0x0150 0x03dc 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA14__CSI_DATA22 0x0150 0x03dc 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA14__EIM_DATA06 0x0150 0x03dc 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA14__GPIO3_IO19 0x0150 0x03dc 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA14__SRC_BT_CFG14 0x0150 0x03dc 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA14__USDHC2_DATA4 0x0150 0x03dc 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x0154 0x03e0 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA15__SAI3_TX_DATA 0x0154 0x03e0 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA15__CSI_DATA23 0x0154 0x03e0 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA15__EIM_DATA07 0x0154 0x03e0 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA15__GPIO3_IO20 0x0154 0x03e0 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA15__SRC_BT_CFG15 0x0154 0x03e0 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA15__USDHC2_DATA5 0x0154 0x03e0 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x0158 0x03e4 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x0158 0x03e4 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA16__UART7_DTE_RX 0x0158 0x03e4 0x0654 1 2 -#define MX6UL_PAD_LCD_DATA16__CSI_DATA01 0x0158 0x03e4 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA16__EIM_DATA08 0x0158 0x03e4 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA16__GPIO3_IO21 0x0158 0x03e4 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA16__SRC_BT_CFG24 0x0158 0x03e4 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA16__USDHC2_DATA6 0x0158 0x03e4 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x015c 0x03e8 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x015c 0x03e8 0x0654 1 3 -#define MX6UL_PAD_LCD_DATA17__UART7_DTE_TX 0x015c 0x03e8 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA17__CSI_DATA00 0x015c 0x03e8 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA17__EIM_DATA09 0x015c 0x03e8 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA17__GPIO3_IO22 0x015c 0x03e8 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA17__SRC_BT_CFG25 0x015c 0x03e8 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA17__USDHC2_DATA7 0x015c 0x03e8 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x0160 0x03ec 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA18__PWM5_OUT 0x0160 0x03ec 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA18__CA7_MX6UL_EVENTO 0x0160 0x03ec 0x0000 2 0 -#define MX6UL_PAD_LCD_DATA18__CSI_DATA10 0x0160 0x03ec 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA18__EIM_DATA10 0x0160 0x03ec 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x0160 0x03ec 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA18__SRC_BT_CFG26 0x0160 0x03ec 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x0160 0x03ec 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA19__EIM_DATA11 0x0164 0x03f0 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x0164 0x03f0 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA19__SRC_BT_CFG27 0x0164 0x03f0 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x0164 0x03f0 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x0164 0x03f0 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA19__PWM6_OUT 0x0164 0x03f0 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA19__WDOG1_WDOG_ANY 0x0164 0x03f0 0x0000 2 0 -#define MX6UL_PAD_LCD_DATA19__CSI_DATA11 0x0164 0x03f0 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA20__EIM_DATA12 0x0168 0x03f4 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA20__GPIO3_IO25 0x0168 0x03f4 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA20__SRC_BT_CFG28 0x0168 0x03f4 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x0168 0x03f4 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x0168 0x03f4 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA20__UART8_DCE_TX 0x0168 0x03f4 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA20__UART8_DTE_RX 0x0168 0x03f4 0x065c 1 2 -#define MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x0168 0x03f4 0x0534 2 0 -#define MX6UL_PAD_LCD_DATA20__CSI_DATA12 0x0168 0x03f4 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x016c 0x03f8 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA21__UART8_DCE_RX 0x016c 0x03f8 0x065c 1 3 -#define MX6UL_PAD_LCD_DATA21__UART8_DTE_TX 0x016c 0x03f8 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA21__ECSPI1_SS0 0x016c 0x03f8 0x0000 2 0 -#define MX6UL_PAD_LCD_DATA21__CSI_DATA13 0x016c 0x03f8 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA21__EIM_DATA13 0x016c 0x03f8 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x016c 0x03f8 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA21__SRC_BT_CFG29 0x016c 0x03f8 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x016c 0x03f8 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x0170 0x03fc 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA22__MQS_RIGHT 0x0170 0x03fc 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x0170 0x03fc 0x053c 2 0 -#define MX6UL_PAD_LCD_DATA22__CSI_DATA14 0x0170 0x03fc 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA22__EIM_DATA14 0x0170 0x03fc 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA22__GPIO3_IO27 0x0170 0x03fc 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA22__SRC_BT_CFG30 0x0170 0x03fc 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x0170 0x03fc 0x0000 8 0 -#define MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x0174 0x0400 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA23__MQS_LEFT 0x0174 0x0400 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x0174 0x0400 0x0538 2 0 -#define MX6UL_PAD_LCD_DATA23__CSI_DATA15 0x0174 0x0400 0x0000 3 0 -#define MX6UL_PAD_LCD_DATA23__EIM_DATA15 0x0174 0x0400 0x0000 4 0 -#define MX6UL_PAD_LCD_DATA23__GPIO3_IO28 0x0174 0x0400 0x0000 5 0 -#define MX6UL_PAD_LCD_DATA23__SRC_BT_CFG31 0x0174 0x0400 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x0174 0x0400 0x0000 8 0 -#define MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0178 0x0404 0x0000 0 0 -#define MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x0178 0x0404 0x0670 1 2 -#define MX6UL_PAD_NAND_RE_B__QSPI_B_SCLK 0x0178 0x0404 0x0000 2 0 -#define MX6UL_PAD_NAND_RE_B__KPP_ROW00 0x0178 0x0404 0x0000 3 0 -#define MX6UL_PAD_NAND_RE_B__EIM_EB_B00 0x0178 0x0404 0x0000 4 0 -#define MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0178 0x0404 0x0000 5 0 -#define MX6UL_PAD_NAND_RE_B__ECSPI3_SS2 0x0178 0x0404 0x0000 8 0 -#define MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x017c 0x0408 0x0000 0 0 -#define MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x017c 0x0408 0x0678 1 2 -#define MX6UL_PAD_NAND_WE_B__QSPI_B_SS0_B 0x017c 0x0408 0x0000 2 0 -#define MX6UL_PAD_NAND_WE_B__KPP_COL00 0x017c 0x0408 0x0000 3 0 -#define MX6UL_PAD_NAND_WE_B__EIM_EB_B01 0x017c 0x0408 0x0000 4 0 -#define MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x017c 0x0408 0x0000 5 0 -#define MX6UL_PAD_NAND_WE_B__ECSPI3_SS3 0x017c 0x0408 0x0000 8 0 -#define MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0180 0x040c 0x0000 0 0 -#define MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x0180 0x040c 0x067c 1 2 -#define MX6UL_PAD_NAND_DATA00__QSPI_B_SS1_B 0x0180 0x040c 0x0000 2 0 -#define MX6UL_PAD_NAND_DATA00__KPP_ROW01 0x0180 0x040c 0x0000 3 0 -#define MX6UL_PAD_NAND_DATA00__EIM_AD08 0x0180 0x040c 0x0000 4 0 -#define MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x0180 0x040c 0x0000 5 0 -#define MX6UL_PAD_NAND_DATA00__ECSPI4_RDY 0x0180 0x040c 0x0000 8 0 -#define MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0184 0x0410 0x0000 0 0 -#define MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x0184 0x0410 0x0680 1 2 -#define MX6UL_PAD_NAND_DATA01__QSPI_B_DQS 0x0184 0x0410 0x0000 2 0 -#define MX6UL_PAD_NAND_DATA01__KPP_COL01 0x0184 0x0410 0x0000 3 0 -#define MX6UL_PAD_NAND_DATA01__EIM_AD09 0x0184 0x0410 0x0000 4 0 -#define MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x0184 0x0410 0x0000 5 0 -#define MX6UL_PAD_NAND_DATA01__ECSPI4_SS1 0x0184 0x0410 0x0000 8 0 -#define MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0188 0x0414 0x0000 0 0 -#define MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x0188 0x0414 0x0684 1 1 -#define MX6UL_PAD_NAND_DATA02__QSPI_B_DATA00 0x0188 0x0414 0x0000 2 0 -#define MX6UL_PAD_NAND_DATA02__KPP_ROW02 0x0188 0x0414 0x0000 3 0 -#define MX6UL_PAD_NAND_DATA02__EIM_AD10 0x0188 0x0414 0x0000 4 0 -#define MX6UL_PAD_NAND_DATA02__GPIO4_IO04 0x0188 0x0414 0x0000 5 0 -#define MX6UL_PAD_NAND_DATA02__ECSPI4_SS2 0x0188 0x0414 0x0000 8 0 -#define MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x018c 0x0418 0x0000 0 0 -#define MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x018c 0x0418 0x0688 1 2 -#define MX6UL_PAD_NAND_DATA03__QSPI_B_DATA01 0x018c 0x0418 0x0000 2 0 -#define MX6UL_PAD_NAND_DATA03__KPP_COL02 0x018c 0x0418 0x0000 3 0 -#define MX6UL_PAD_NAND_DATA03__EIM_AD11 0x018c 0x0418 0x0000 4 0 -#define MX6UL_PAD_NAND_DATA03__GPIO4_IO05 0x018c 0x0418 0x0000 5 0 -#define MX6UL_PAD_NAND_DATA03__ECSPI4_SS3 0x018c 0x0418 0x0000 8 0 -#define MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0190 0x041c 0x0000 0 0 -#define MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x0190 0x041c 0x068c 1 1 -#define MX6UL_PAD_NAND_DATA04__QSPI_B_DATA02 0x0190 0x041c 0x0000 2 0 -#define MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x0190 0x041c 0x0564 3 1 -#define MX6UL_PAD_NAND_DATA04__EIM_AD12 0x0190 0x041c 0x0000 4 0 -#define MX6UL_PAD_NAND_DATA04__GPIO4_IO06 0x0190 0x041c 0x0000 5 0 -#define MX6UL_PAD_NAND_DATA04__UART2_DCE_TX 0x0190 0x041c 0x0000 8 0 -#define MX6UL_PAD_NAND_DATA04__UART2_DTE_RX 0x0190 0x041c 0x062c 8 2 -#define MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0194 0x0420 0x0000 0 0 -#define MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x0194 0x0420 0x0690 1 1 -#define MX6UL_PAD_NAND_DATA05__QSPI_B_DATA03 0x0194 0x0420 0x0000 2 0 -#define MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x0194 0x0420 0x056c 3 1 -#define MX6UL_PAD_NAND_DATA05__EIM_AD13 0x0194 0x0420 0x0000 4 0 -#define MX6UL_PAD_NAND_DATA05__GPIO4_IO07 0x0194 0x0420 0x0000 5 0 -#define MX6UL_PAD_NAND_DATA05__UART2_DCE_RX 0x0194 0x0420 0x062c 8 3 -#define MX6UL_PAD_NAND_DATA05__UART2_DTE_TX 0x0194 0x0420 0x0000 8 0 -#define MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0198 0x0424 0x0000 0 0 -#define MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x0198 0x0424 0x0694 1 1 -#define MX6UL_PAD_NAND_DATA06__SAI2_RX_BCLK 0x0198 0x0424 0x0000 2 0 -#define MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x0198 0x0424 0x0568 3 1 -#define MX6UL_PAD_NAND_DATA06__EIM_AD14 0x0198 0x0424 0x0000 4 0 -#define MX6UL_PAD_NAND_DATA06__GPIO4_IO08 0x0198 0x0424 0x0000 5 0 -#define MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS 0x0198 0x0424 0x0000 8 0 -#define MX6UL_PAD_NAND_DATA06__UART2_DTE_RTS 0x0198 0x0424 0x0628 8 4 -#define MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x019c 0x0428 0x0000 0 0 -#define MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x019c 0x0428 0x0698 1 1 -#define MX6UL_PAD_NAND_DATA07__QSPI_A_SS1_B 0x019c 0x0428 0x0000 2 0 -#define MX6UL_PAD_NAND_DATA07__ECSPI4_SS0 0x019c 0x0428 0x0000 3 0 -#define MX6UL_PAD_NAND_DATA07__EIM_AD15 0x019c 0x0428 0x0000 4 0 -#define MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x019c 0x0428 0x0000 5 0 -#define MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x019c 0x0428 0x0628 8 5 -#define MX6UL_PAD_NAND_DATA07__UART2_DTE_CTS 0x019c 0x0428 0x0000 8 0 -#define MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x01a0 0x042c 0x0000 0 0 -#define MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x01a0 0x042c 0x0000 1 0 -#define MX6UL_PAD_NAND_ALE__QSPI_A_DQS 0x01a0 0x042c 0x0000 2 0 -#define MX6UL_PAD_NAND_ALE__PWM3_OUT 0x01a0 0x042c 0x0000 3 0 -#define MX6UL_PAD_NAND_ALE__EIM_ADDR17 0x01a0 0x042c 0x0000 4 0 -#define MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x01a0 0x042c 0x0000 5 0 -#define MX6UL_PAD_NAND_ALE__ECSPI3_SS1 0x01a0 0x042c 0x0000 8 0 -#define MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x01a4 0x0430 0x0000 0 0 -#define MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B 0x01a4 0x0430 0x0000 1 0 -#define MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x01a4 0x0430 0x0000 2 0 -#define MX6UL_PAD_NAND_WP_B__PWM4_OUT 0x01a4 0x0430 0x0000 3 0 -#define MX6UL_PAD_NAND_WP_B__EIM_BCLK 0x01a4 0x0430 0x0000 4 0 -#define MX6UL_PAD_NAND_WP_B__GPIO4_IO11 0x01a4 0x0430 0x0000 5 0 -#define MX6UL_PAD_NAND_WP_B__ECSPI3_RDY 0x01a4 0x0430 0x0000 8 0 -#define MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x01a8 0x0434 0x0000 0 0 -#define MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x01a8 0x0434 0x0000 1 0 -#define MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x01a8 0x0434 0x0000 2 0 -#define MX6UL_PAD_NAND_READY_B__ECSPI3_SS0 0x01a8 0x0434 0x0000 3 0 -#define MX6UL_PAD_NAND_READY_B__EIM_CS1_B 0x01a8 0x0434 0x0000 4 0 -#define MX6UL_PAD_NAND_READY_B__GPIO4_IO12 0x01a8 0x0434 0x0000 5 0 -#define MX6UL_PAD_NAND_READY_B__UART3_DCE_TX 0x01a8 0x0434 0x0000 8 0 -#define MX6UL_PAD_NAND_READY_B__UART3_DTE_RX 0x01a8 0x0434 0x0634 8 2 -#define MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x01ac 0x0438 0x0000 0 0 -#define MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x01ac 0x0438 0x0000 1 0 -#define MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x01ac 0x0438 0x0000 2 0 -#define MX6UL_PAD_NAND_CE0_B__ECSPI3_SCLK 0x01ac 0x0438 0x0554 3 1 -#define MX6UL_PAD_NAND_CE0_B__EIM_DTACK_B 0x01ac 0x0438 0x0000 4 0 -#define MX6UL_PAD_NAND_CE0_B__GPIO4_IO13 0x01ac 0x0438 0x0000 5 0 -#define MX6UL_PAD_NAND_CE0_B__UART3_DCE_RX 0x01ac 0x0438 0x0634 8 3 -#define MX6UL_PAD_NAND_CE0_B__UART3_DTE_TX 0x01ac 0x0438 0x0000 8 0 -#define MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B 0x01b0 0x043c 0x0000 0 0 -#define MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x01b0 0x043c 0x0000 1 0 -#define MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x01b0 0x043c 0x0000 2 0 -#define MX6UL_PAD_NAND_CE1_B__ECSPI3_MOSI 0x01b0 0x043c 0x055c 3 1 -#define MX6UL_PAD_NAND_CE1_B__EIM_ADDR18 0x01b0 0x043c 0x0000 4 0 -#define MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x01b0 0x043c 0x0000 5 0 -#define MX6UL_PAD_NAND_CE1_B__UART3_DCE_CTS 0x01b0 0x043c 0x0000 8 0 -#define MX6UL_PAD_NAND_CE1_B__UART3_DTE_RTS 0x01b0 0x043c 0x0630 8 2 -#define MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x01b4 0x0440 0x0000 0 0 -#define MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x01b4 0x0440 0x0000 1 0 -#define MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x01b4 0x0440 0x0000 2 0 -#define MX6UL_PAD_NAND_CLE__ECSPI3_MISO 0x01b4 0x0440 0x0558 3 1 -#define MX6UL_PAD_NAND_CLE__EIM_ADDR16 0x01b4 0x0440 0x0000 4 0 -#define MX6UL_PAD_NAND_CLE__GPIO4_IO15 0x01b4 0x0440 0x0000 5 0 -#define MX6UL_PAD_NAND_CLE__UART3_DCE_RTS 0x01b4 0x0440 0x0630 8 3 -#define MX6UL_PAD_NAND_CLE__UART3_DTE_CTS 0x01b4 0x0440 0x0000 8 0 -#define MX6UL_PAD_NAND_DQS__RAWNAND_DQS 0x01b8 0x0444 0x0000 0 0 -#define MX6UL_PAD_NAND_DQS__CSI_FIELD 0x01b8 0x0444 0x0530 1 1 -#define MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x01b8 0x0444 0x0000 2 0 -#define MX6UL_PAD_NAND_DQS__PWM5_OUT 0x01b8 0x0444 0x0000 3 0 -#define MX6UL_PAD_NAND_DQS__EIM_WAIT 0x01b8 0x0444 0x0000 4 0 -#define MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x01b8 0x0444 0x0000 5 0 -#define MX6UL_PAD_NAND_DQS__SDMA_EXT_EVENT01 0x01b8 0x0444 0x0000 6 0 -#define MX6UL_PAD_NAND_DQS__SPDIF_EXT_CLK 0x01b8 0x0444 0x0000 8 0 -#define MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x01bc 0x0448 0x0000 0 0 -#define MX6UL_PAD_SD1_CMD__GPT2_COMPARE1 0x01bc 0x0448 0x0000 1 0 -#define MX6UL_PAD_SD1_CMD__SAI2_RX_SYNC 0x01bc 0x0448 0x0000 2 0 -#define MX6UL_PAD_SD1_CMD__SPDIF_OUT 0x01bc 0x0448 0x0000 3 0 -#define MX6UL_PAD_SD1_CMD__EIM_ADDR19 0x01bc 0x0448 0x0000 4 0 -#define MX6UL_PAD_SD1_CMD__GPIO2_IO16 0x01bc 0x0448 0x0000 5 0 -#define MX6UL_PAD_SD1_CMD__SDMA_EXT_EVENT00 0x01bc 0x0448 0x0000 6 0 -#define MX6UL_PAD_SD1_CMD__USB_OTG1_PWR 0x01bc 0x0448 0x0000 8 0 -#define MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x01c0 0x044c 0x0000 0 0 -#define MX6UL_PAD_SD1_CLK__GPT2_COMPARE2 0x01c0 0x044c 0x0000 1 0 -#define MX6UL_PAD_SD1_CLK__SAI2_MCLK 0x01c0 0x044c 0x0000 2 0 -#define MX6UL_PAD_SD1_CLK__SPDIF_IN 0x01c0 0x044c 0x0618 3 3 -#define MX6UL_PAD_SD1_CLK__EIM_ADDR20 0x01c0 0x044c 0x0000 4 0 -#define MX6UL_PAD_SD1_CLK__GPIO2_IO17 0x01c0 0x044c 0x0000 5 0 -#define MX6UL_PAD_SD1_CLK__USB_OTG1_OC 0x01c0 0x044c 0x0000 8 0 -#define MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x01c4 0x0450 0x0000 0 0 -#define MX6UL_PAD_SD1_DATA0__GPT2_COMPARE3 0x01c4 0x0450 0x0000 1 0 -#define MX6UL_PAD_SD1_DATA0__SAI2_TX_SYNC 0x01c4 0x0450 0x05fc 2 1 -#define MX6UL_PAD_SD1_DATA0__FLEXCAN1_TX 0x01c4 0x0450 0x0000 3 0 -#define MX6UL_PAD_SD1_DATA0__EIM_ADDR21 0x01c4 0x0450 0x0000 4 0 -#define MX6UL_PAD_SD1_DATA0__GPIO2_IO18 0x01c4 0x0450 0x0000 5 0 -#define MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID 0x01c4 0x0450 0x0000 8 0 -#define MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x01c8 0x0454 0x0000 0 0 -#define MX6UL_PAD_SD1_DATA1__GPT2_CLK 0x01c8 0x0454 0x05a0 1 1 -#define MX6UL_PAD_SD1_DATA1__SAI2_TX_BCLK 0x01c8 0x0454 0x05f8 2 1 -#define MX6UL_PAD_SD1_DATA1__FLEXCAN1_RX 0x01c8 0x0454 0x0584 3 3 -#define MX6UL_PAD_SD1_DATA1__EIM_ADDR22 0x01c8 0x0454 0x0000 4 0 -#define MX6UL_PAD_SD1_DATA1__GPIO2_IO19 0x01c8 0x0454 0x0000 5 0 -#define MX6UL_PAD_SD1_DATA1__USB_OTG2_PWR 0x01c8 0x0454 0x0000 8 0 -#define MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x01cc 0x0458 0x0000 0 0 -#define MX6UL_PAD_SD1_DATA2__GPT2_CAPTURE1 0x01cc 0x0458 0x0598 1 1 -#define MX6UL_PAD_SD1_DATA2__SAI2_RX_DATA 0x01cc 0x0458 0x05f4 2 1 -#define MX6UL_PAD_SD1_DATA2__FLEXCAN2_TX 0x01cc 0x0458 0x0000 3 0 -#define MX6UL_PAD_SD1_DATA2__EIM_ADDR23 0x01cc 0x0458 0x0000 4 0 -#define MX6UL_PAD_SD1_DATA2__GPIO2_IO20 0x01cc 0x0458 0x0000 5 0 -#define MX6UL_PAD_SD1_DATA2__CCM_CLKO1 0x01cc 0x0458 0x0000 6 0 -#define MX6UL_PAD_SD1_DATA2__USB_OTG2_OC 0x01cc 0x0458 0x0000 8 0 -#define MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x01d0 0x045c 0x0000 0 0 -#define MX6UL_PAD_SD1_DATA3__GPT2_CAPTURE2 0x01d0 0x045c 0x059c 1 1 -#define MX6UL_PAD_SD1_DATA3__SAI2_TX_DATA 0x01d0 0x045c 0x0000 2 0 -#define MX6UL_PAD_SD1_DATA3__FLEXCAN2_RX 0x01d0 0x045c 0x0588 3 3 -#define MX6UL_PAD_SD1_DATA3__EIM_ADDR24 0x01d0 0x045c 0x0000 4 0 -#define MX6UL_PAD_SD1_DATA3__GPIO2_IO21 0x01d0 0x045c 0x0000 5 0 -#define MX6UL_PAD_SD1_DATA3__CCM_CLKO2 0x01d0 0x045c 0x0000 6 0 -#define MX6UL_PAD_SD1_DATA3__ANATOP_OTG2_ID 0x01d0 0x045c 0x0000 8 0 -#define MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x01d4 0x0460 0x0000 0 0 -#define MX6UL_PAD_CSI_MCLK__USDHC2_CD_B 0x01d4 0x0460 0x0674 1 0 -#define MX6UL_PAD_CSI_MCLK__RAWNAND_CE2_B 0x01d4 0x0460 0x0000 2 0 -#define MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x01d4 0x0460 0x05a8 3 0 -#define MX6UL_PAD_CSI_MCLK__EIM_CS0_B 0x01d4 0x0460 0x0000 4 0 -#define MX6UL_PAD_CSI_MCLK__GPIO4_IO17 0x01d4 0x0460 0x0000 5 0 -#define MX6UL_PAD_CSI_MCLK__SNVS_HP_VIO_5_CTL 0x01d4 0x0460 0x0000 6 0 -#define MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x01d4 0x0460 0x0000 8 0 -#define MX6UL_PAD_CSI_MCLK__UART6_DTE_RX 0x01d4 0x0460 0x064c 8 0 -#define MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x01d8 0x0464 0x0528 0 1 -#define MX6UL_PAD_CSI_PIXCLK__USDHC2_WP 0x01d8 0x0464 0x069c 1 2 -#define MX6UL_PAD_CSI_PIXCLK__RAWNAND_CE3_B 0x01d8 0x0464 0x0000 2 0 -#define MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x01d8 0x0464 0x05a4 3 2 -#define MX6UL_PAD_CSI_PIXCLK__EIM_OE 0x01d8 0x0464 0x0000 4 0 -#define MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18 0x01d8 0x0464 0x0000 5 0 -#define MX6UL_PAD_CSI_PIXCLK__SNVS_HP_VIO_5 0x01d8 0x0464 0x0000 6 0 -#define MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x01d8 0x0464 0x064c 8 3 -#define MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX 0x01d8 0x0464 0x0000 8 0 -#define MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x01dc 0x0468 0x052c 0 0 -#define MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x01dc 0x0468 0x0670 1 0 -#define MX6UL_PAD_CSI_VSYNC__SIM1_PORT1_CLK 0x01dc 0x0468 0x0000 2 0 -#define MX6UL_PAD_CSI_VSYNC__I2C2_SDA 0x01dc 0x0468 0x05b0 3 0 -#define MX6UL_PAD_CSI_VSYNC__EIM_RW 0x01dc 0x0468 0x0000 4 0 -#define MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x01dc 0x0468 0x0000 5 0 -#define MX6UL_PAD_CSI_VSYNC__PWM7_OUT 0x01dc 0x0468 0x0000 6 0 -#define MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS 0x01dc 0x0468 0x0648 8 0 -#define MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS 0x01dc 0x0468 0x0000 8 0 -#define MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x01e0 0x046c 0x0524 0 0 -#define MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x01e0 0x046c 0x0678 1 0 -#define MX6UL_PAD_CSI_HSYNC__SIM1_PORT1_PD 0x01e0 0x046c 0x0000 2 0 -#define MX6UL_PAD_CSI_HSYNC__I2C2_SCL 0x01e0 0x046c 0x05ac 3 0 -#define MX6UL_PAD_CSI_HSYNC__EIM_LBA_B 0x01e0 0x046c 0x0000 4 0 -#define MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x01e0 0x046c 0x0000 5 0 -#define MX6UL_PAD_CSI_HSYNC__PWM8_OUT 0x01e0 0x046c 0x0000 6 0 -#define MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS 0x01e0 0x046c 0x0000 8 0 -#define MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS 0x01e0 0x046c 0x0648 8 1 -#define MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x01e4 0x0470 0x04c4 0 0 -#define MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x01e4 0x0470 0x067c 1 0 -#define MX6UL_PAD_CSI_DATA00__SIM1_PORT1_RST_B 0x01e4 0x0470 0x0000 2 0 -#define MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x01e4 0x0470 0x0544 3 0 -#define MX6UL_PAD_CSI_DATA00__EIM_AD00 0x01e4 0x0470 0x0000 4 0 -#define MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x01e4 0x0470 0x0000 5 0 -#define MX6UL_PAD_CSI_DATA00__SRC_INT_BOOT 0x01e4 0x0470 0x0000 6 0 -#define MX6UL_PAD_CSI_DATA00__UART5_DCE_TX 0x01e4 0x0470 0x0000 8 0 -#define MX6UL_PAD_CSI_DATA00__UART5_DTE_RX 0x01e4 0x0470 0x0644 8 0 -#define MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x01e8 0x0474 0x04c8 0 0 -#define MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x01e8 0x0474 0x0680 1 0 -#define MX6UL_PAD_CSI_DATA01__SIM1_PORT1_SVEN 0x01e8 0x0474 0x0000 2 0 -#define MX6UL_PAD_CSI_DATA01__ECSPI2_SS0 0x01e8 0x0474 0x0000 3 0 -#define MX6UL_PAD_CSI_DATA01__EIM_AD01 0x01e8 0x0474 0x0000 4 0 -#define MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x01e8 0x0474 0x0000 5 0 -#define MX6UL_PAD_CSI_DATA01__SAI1_MCLK 0x01e8 0x0474 0x0000 6 0 -#define MX6UL_PAD_CSI_DATA01__UART5_DCE_RX 0x01e8 0x0474 0x0644 8 1 -#define MX6UL_PAD_CSI_DATA01__UART5_DTE_TX 0x01e8 0x0474 0x0000 8 0 -#define MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x01ec 0x0478 0x04d8 0 1 -#define MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x01ec 0x0478 0x0684 1 2 -#define MX6UL_PAD_CSI_DATA02__SIM1_PORT1_TRXD 0x01ec 0x0478 0x0000 2 0 -#define MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x01ec 0x0478 0x054c 3 1 -#define MX6UL_PAD_CSI_DATA02__EIM_AD02 0x01ec 0x0478 0x0000 4 0 -#define MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x01ec 0x0478 0x0000 5 0 -#define MX6UL_PAD_CSI_DATA02__SAI1_RX_SYNC 0x01ec 0x0478 0x0000 6 0 -#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01ec 0x0478 0x0640 8 5 -#define MX6UL_PAD_CSI_DATA02__UART5_DTE_CTS 0x01ec 0x0478 0x0000 8 0 -#define MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x01f0 0x047c 0x04cc 0 0 -#define MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x01f0 0x047c 0x0688 1 0 -#define MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD 0x01f0 0x047c 0x0000 2 0 -#define MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x01f0 0x047c 0x0548 3 0 -#define MX6UL_PAD_CSI_DATA03__EIM_AD03 0x01f0 0x047c 0x0000 4 0 -#define MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x01f0 0x047c 0x0000 5 0 -#define MX6UL_PAD_CSI_DATA03__SAI1_RX_BCLK 0x01f0 0x047c 0x0000 6 0 -#define MX6UL_PAD_CSI_DATA03__UART5_DCE_CTS 0x01f0 0x047c 0x0000 8 0 -#define MX6UL_PAD_CSI_DATA03__UART5_DTE_RTS 0x01f0 0x047c 0x0640 8 0 -#define MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x01f4 0x0480 0x04dc 0 1 -#define MX6UL_PAD_CSI_DATA04__USDHC2_DATA4 0x01f4 0x0480 0x068c 1 2 -#define MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK 0x01f4 0x0480 0x0000 2 0 -#define MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x01f4 0x0480 0x0534 3 1 -#define MX6UL_PAD_CSI_DATA04__EIM_AD04 0x01f4 0x0480 0x0000 4 0 -#define MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x01f4 0x0480 0x0000 5 0 -#define MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC 0x01f4 0x0480 0x05ec 6 1 -#define MX6UL_PAD_CSI_DATA04__USDHC1_WP 0x01f4 0x0480 0x0000 8 0 -#define MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x01f8 0x0484 0x04e0 0 1 -#define MX6UL_PAD_CSI_DATA05__USDHC2_DATA5 0x01f8 0x0484 0x0690 1 2 -#define MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B 0x01f8 0x0484 0x0000 2 0 -#define MX6UL_PAD_CSI_DATA05__ECSPI1_SS0 0x01f8 0x0484 0x0000 3 0 -#define MX6UL_PAD_CSI_DATA05__EIM_AD05 0x01f8 0x0484 0x0000 4 0 -#define MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x01f8 0x0484 0x0000 5 0 -#define MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x01f8 0x0484 0x05e8 6 1 -#define MX6UL_PAD_CSI_DATA05__USDHC1_CD_B 0x01f8 0x0484 0x0000 8 0 -#define MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x01fc 0x0488 0x04e4 0 1 -#define MX6UL_PAD_CSI_DATA06__USDHC2_DATA6 0x01fc 0x0488 0x0694 1 2 -#define MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN 0x01fc 0x0488 0x0000 2 0 -#define MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x01fc 0x0488 0x053c 3 1 -#define MX6UL_PAD_CSI_DATA06__EIM_AD06 0x01fc 0x0488 0x0000 4 0 -#define MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x01fc 0x0488 0x0000 5 0 -#define MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x01fc 0x0488 0x0000 6 0 -#define MX6UL_PAD_CSI_DATA06__USDHC1_RESET_B 0x01fc 0x0488 0x0000 8 0 -#define MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x0200 0x048c 0x04e8 0 1 -#define MX6UL_PAD_CSI_DATA07__USDHC2_DATA7 0x0200 0x048c 0x0698 1 2 -#define MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD 0x0200 0x048c 0x0000 2 0 -#define MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x0200 0x048c 0x0538 3 1 -#define MX6UL_PAD_CSI_DATA07__EIM_AD07 0x0200 0x048c 0x0000 4 0 -#define MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x0200 0x048c 0x0000 5 0 -#define MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA 0x0200 0x048c 0x0000 6 0 -#define MX6UL_PAD_CSI_DATA07__USDHC1_VSELECT 0x0200 0x048c 0x0000 8 0 +#define MX6UL_PAD_JTAG_MOD__SJC_MOD 0x0044 0x02d0 0x0000 0 0 +#define MX6UL_PAD_JTAG_MOD__GPT2_CLK 0x0044 0x02d0 0x05a0 1 0 +#define MX6UL_PAD_JTAG_MOD__SPDIF_OUT 0x0044 0x02d0 0x0000 2 0 +#define MX6UL_PAD_JTAG_MOD__ENET1_REF_CLK_25M 0x0044 0x02d0 0x0000 3 0 +#define MX6UL_PAD_JTAG_MOD__CCM_PMIC_RDY 0x0044 0x02d0 0x04c0 4 0 +#define MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x0044 0x02d0 0x0000 5 0 +#define MX6UL_PAD_JTAG_MOD__SDMA_EXT_EVENT00 0x0044 0x02d0 0x0000 6 0 +#define MX6UL_PAD_JTAG_TMS__SJC_TMS 0x0048 0x02d4 0x0000 0 0 +#define MX6UL_PAD_JTAG_TMS__GPT2_CAPTURE1 0x0048 0x02d4 0x0598 1 0 +#define MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x0048 0x02d4 0x0000 2 0 +#define MX6UL_PAD_JTAG_TMS__CCM_CLKO1 0x0048 0x02d4 0x0000 3 0 +#define MX6UL_PAD_JTAG_TMS__CCM_WAIT 0x0048 0x02d4 0x0000 4 0 +#define MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x0048 0x02d4 0x0000 5 0 +#define MX6UL_PAD_JTAG_TMS__SDMA_EXT_EVENT01 0x0048 0x02d4 0x0000 6 0 +#define MX6UL_PAD_JTAG_TMS__EPIT1_OUT 0x0048 0x02d4 0x0000 8 0 +#define MX6UL_PAD_JTAG_TDO__SJC_TDO 0x004c 0x02d8 0x0000 0 0 +#define MX6UL_PAD_JTAG_TDO__GPT2_CAPTURE2 0x004c 0x02d8 0x059c 1 0 +#define MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x004c 0x02d8 0x05fc 2 0 +#define MX6UL_PAD_JTAG_TDO__CCM_CLKO2 0x004c 0x02d8 0x0000 3 0 +#define MX6UL_PAD_JTAG_TDO__CCM_STOP 0x004c 0x02d8 0x0000 4 0 +#define MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x004c 0x02d8 0x0000 5 0 +#define MX6UL_PAD_JTAG_TDO__MQS_RIGHT 0x004c 0x02d8 0x0000 6 0 +#define MX6UL_PAD_JTAG_TDO__EPIT2_OUT 0x004c 0x02d8 0x0000 8 0 +#define MX6UL_PAD_JTAG_TDI__SJC_TDI 0x0050 0x02dc 0x0000 0 0 +#define MX6UL_PAD_JTAG_TDI__GPT2_COMPARE1 0x0050 0x02dc 0x0000 1 0 +#define MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x0050 0x02dc 0x05f8 2 0 +#define MX6UL_PAD_JTAG_TDI__PWM6_OUT 0x0050 0x02dc 0x0000 4 0 +#define MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x0050 0x02dc 0x0000 5 0 +#define MX6UL_PAD_JTAG_TDI__MQS_LEFT 0x0050 0x02dc 0x0000 6 0 +#define MX6UL_PAD_JTAG_TDI__SIM1_POWER_FAIL 0x0050 0x02dc 0x0000 8 0 +#define MX6UL_PAD_JTAG_TCK__SJC_TCK 0x0054 0x02e0 0x0000 0 0 +#define MX6UL_PAD_JTAG_TCK__GPT2_COMPARE2 0x0054 0x02e0 0x0000 1 0 +#define MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x0054 0x02e0 0x05f4 2 0 +#define MX6UL_PAD_JTAG_TCK__PWM7_OUT 0x0054 0x02e0 0x0000 4 0 +#define MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x0054 0x02e0 0x0000 5 0 +#define MX6UL_PAD_JTAG_TCK__SIM2_POWER_FAIL 0x0054 0x02e0 0x0000 8 0 +#define MX6UL_PAD_JTAG_TRST_B__SJC_TRSTB 0x0058 0x02e4 0x0000 0 0 +#define MX6UL_PAD_JTAG_TRST_B__GPT2_COMPARE3 0x0058 0x02e4 0x0000 1 0 +#define MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x0058 0x02e4 0x0000 2 0 +#define MX6UL_PAD_JTAG_TRST_B__PWM8_OUT 0x0058 0x02e4 0x0000 4 0 +#define MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x0058 0x02e4 0x0000 5 0 +#define MX6UL_PAD_JTAG_TRST_B__CAAM_RNG_OSC_OBS 0x0058 0x02e4 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x005c 0x02e8 0x05ac 0 1 +#define MX6UL_PAD_GPIO1_IO00__GPT1_CAPTURE1 0x005c 0x02e8 0x058c 1 0 +#define MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x005c 0x02e8 0x04b8 2 0 +#define MX6UL_PAD_GPIO1_IO00__ENET1_REF_CLK1 0x005c 0x02e8 0x0574 3 0 +#define MX6UL_PAD_GPIO1_IO00__MQS_RIGHT 0x005c 0x02e8 0x0000 4 0 +#define MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0x005c 0x02e8 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO00__ENET1_1588_EVENT0_IN 0x005c 0x02e8 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO00__SRC_SYSTEM_RESET 0x005c 0x02e8 0x0000 7 0 +#define MX6UL_PAD_GPIO1_IO00__WDOG3_WDOG_B 0x005c 0x02e8 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x0060 0x02ec 0x05b0 0 1 +#define MX6UL_PAD_GPIO1_IO01__GPT1_COMPARE1 0x0060 0x02ec 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x0060 0x02ec 0x0664 2 0 +#define MX6UL_PAD_GPIO1_IO01__ENET2_REF_CLK2 0x0060 0x02ec 0x057c 3 0 +#define MX6UL_PAD_GPIO1_IO01__MQS_LEFT 0x0060 0x02ec 0x0000 4 0 +#define MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x0060 0x02ec 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO01__ENET1_1588_EVENT0_OUT 0x0060 0x02ec 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO01__SRC_EARLY_RESET 0x0060 0x02ec 0x0000 7 0 +#define MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B 0x0060 0x02ec 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO02__I2C1_SCL 0x0064 0x02f0 0x05a4 0 0 +#define MX6UL_PAD_GPIO1_IO02__GPT1_COMPARE2 0x0064 0x02f0 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO02__USB_OTG2_PWR 0x0064 0x02f0 0x0000 2 0 +#define MX6UL_PAD_GPIO1_IO02__ENET1_REF_CLK_25M 0x0064 0x02f0 0x0000 3 0 +#define MX6UL_PAD_GPIO1_IO02__USDHC1_WP 0x0064 0x02f0 0x066c 4 0 +#define MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x0064 0x02f0 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO02__SDMA_EXT_EVENT00 0x0064 0x02f0 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO02__SRC_ANY_PU_RESET 0x0064 0x02f0 0x0000 7 0 +#define MX6UL_PAD_GPIO1_IO02__UART1_DCE_TX 0x0064 0x02f0 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO02__UART1_DTE_RX 0x0064 0x02f0 0x0624 8 0 +#define MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x0068 0x02f4 0x05a8 0 1 +#define MX6UL_PAD_GPIO1_IO03__GPT1_COMPARE3 0x0068 0x02f4 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO03__USB_OTG2_OC 0x0068 0x02f4 0x0660 2 0 +#define MX6UL_PAD_GPIO1_IO03__USDHC1_CD_B 0x0068 0x02f4 0x0668 4 0 +#define MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x0068 0x02f4 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO03__CCM_DI0_eXT_CLK 0x0068 0x02f4 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO03__SRC_TESTER_ACK 0x0068 0x02f4 0x0000 7 0 +#define MX6UL_PAD_GPIO1_IO03__UART1_DTE_TX 0x0068 0x02f4 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO03__UART1_DCE_RX 0x0068 0x02f4 0x0624 8 1 +#define MX6UL_PAD_GPIO1_IO04__ENET1_REF_CLK1 0x006c 0x02f8 0x0574 0 1 +#define MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x006c 0x02f8 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR 0x006c 0x02f8 0x0000 2 0 +#define MX6UL_PAD_GPIO1_IO04__USDHC1_RESET_B 0x006c 0x02f8 0x0000 4 0 +#define MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x006c 0x02f8 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO04__ENET2_1588_EVENT0_IN 0x006c 0x02f8 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX 0x006c 0x02f8 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX 0x006c 0x02f8 0x0644 8 2 +#define MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2 0x0070 0x02fc 0x057c 0 1 +#define MX6UL_PAD_GPIO1_IO05__PWM4_OUT 0x0070 0x02fc 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO05__ANATOP_OTG2_ID 0x0070 0x02fc 0x04bc 2 0 +#define MX6UL_PAD_GPIO1_IO05__CSI_FIELD 0x0070 0x02fc 0x0530 3 0 +#define MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x0070 0x02fc 0x0000 4 0 +#define MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x0070 0x02fc 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO05__ENET2_1588_EVENT0_OUT 0x0070 0x02fc 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX 0x0070 0x02fc 0x0644 8 3 +#define MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX 0x0070 0x02fc 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x0074 0x0300 0x0578 0 0 +#define MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x0074 0x0300 0x0580 1 0 +#define MX6UL_PAD_GPIO1_IO06__USB_OTG_PWR_WAKE 0x0074 0x0300 0x0000 2 0 +#define MX6UL_PAD_GPIO1_IO06__CSI_MCLK 0x0074 0x0300 0x0000 3 0 +#define MX6UL_PAD_GPIO1_IO06__USDHC2_WP 0x0074 0x0300 0x069c 4 0 +#define MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x0074 0x0300 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO06__CCM_WAIT 0x0074 0x0300 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO06__CCM_REF_EN_B 0x0074 0x0300 0x0000 7 0 +#define MX6UL_PAD_GPIO1_IO06__UART1_DCE_CTS 0x0074 0x0300 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO06__UART1_DTE_RTS 0x0074 0x0300 0x0620 8 0 +#define MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x0078 0x0304 0x0000 0 0 +#define MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x0078 0x0304 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO07__USB_OTG_HOST_MODE 0x0078 0x0304 0x0000 2 0 +#define MX6UL_PAD_GPIO1_IO07__CSI_PIXCLK 0x0078 0x0304 0x0528 3 0 +#define MX6UL_PAD_GPIO1_IO07__USDHC2_CD_B 0x0078 0x0304 0x0674 4 1 +#define MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x0078 0x0304 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO07__CCM_STOP 0x0078 0x0304 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO07__UART1_DCE_RTS 0x0078 0x0304 0x0620 8 1 +#define MX6UL_PAD_GPIO1_IO07__UART1_DTE_CTS 0x0078 0x0304 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x007c 0x0308 0x0000 0 0 +#define MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x007c 0x0308 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO08__SPDIF_OUT 0x007c 0x0308 0x0000 2 0 +#define MX6UL_PAD_GPIO1_IO08__CSI_VSYNC 0x007c 0x0308 0x052c 3 1 +#define MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT 0x007c 0x0308 0x0000 4 0 +#define MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x007c 0x0308 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO08__CCM_PMIC_RDY 0x007c 0x0308 0x04c0 6 1 +#define MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x007c 0x0308 0x0640 8 1 +#define MX6UL_PAD_GPIO1_IO08__UART5_DTE_CTS 0x007c 0x0308 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0x0080 0x030c 0x0000 0 0 +#define MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x0080 0x030c 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO09__SPDIF_IN 0x0080 0x030c 0x0618 2 0 +#define MX6UL_PAD_GPIO1_IO09__CSI_HSYNC 0x0080 0x030c 0x0524 3 1 +#define MX6UL_PAD_GPIO1_IO09__USDHC2_RESET_B 0x0080 0x030c 0x0000 4 0 +#define MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0080 0x030c 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO09__USDHC1_RESET_B 0x0080 0x030c 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x0080 0x030c 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO09__UART5_DTE_RTS 0x0080 0x030c 0x0640 8 2 +#define MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x0084 0x0310 0x0000 0 0 +#define MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX 0x0084 0x0310 0x0624 0 2 +#define MX6UL_PAD_UART1_TX_DATA__ENET1_RDATA02 0x0084 0x0310 0x0000 1 0 +#define MX6UL_PAD_UART1_TX_DATA__I2C3_SCL 0x0084 0x0310 0x05b4 2 0 +#define MX6UL_PAD_UART1_TX_DATA__CSI_DATA02 0x0084 0x0310 0x04c4 3 1 +#define MX6UL_PAD_UART1_TX_DATA__GPT1_COMPARE1 0x0084 0x0310 0x0000 4 0 +#define MX6UL_PAD_UART1_TX_DATA__GPIO1_IO16 0x0084 0x0310 0x0000 5 0 +#define MX6UL_PAD_UART1_TX_DATA__SPDIF_OUT 0x0084 0x0310 0x0000 8 0 +#define MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x0088 0x0314 0x0624 0 3 +#define MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX 0x0088 0x0314 0x0000 0 0 +#define MX6UL_PAD_UART1_RX_DATA__ENET1_RDATA03 0x0088 0x0314 0x0000 1 0 +#define MX6UL_PAD_UART1_RX_DATA__I2C3_SDA 0x0088 0x0314 0x05b8 2 0 +#define MX6UL_PAD_UART1_RX_DATA__CSI_DATA03 0x0088 0x0314 0x04c8 3 1 +#define MX6UL_PAD_UART1_RX_DATA__GPT1_CLK 0x0088 0x0314 0x0594 4 0 +#define MX6UL_PAD_UART1_RX_DATA__GPIO1_IO17 0x0088 0x0314 0x0000 5 0 +#define MX6UL_PAD_UART1_RX_DATA__SPDIF_IN 0x0088 0x0314 0x0618 8 1 +#define MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS 0x008c 0x0318 0x0000 0 0 +#define MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS 0x008c 0x0318 0x0620 0 2 +#define MX6UL_PAD_UART1_CTS_B__ENET1_RX_CLK 0x008c 0x0318 0x0000 1 0 +#define MX6UL_PAD_UART1_CTS_B__USDHC1_WP 0x008c 0x0318 0x066c 2 1 +#define MX6UL_PAD_UART1_CTS_B__CSI_DATA04 0x008c 0x0318 0x04d8 3 0 +#define MX6UL_PAD_UART1_CTS_B__ENET2_1588_EVENT1_IN 0x008c 0x0318 0x0000 4 0 +#define MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x008c 0x0318 0x0000 5 0 +#define MX6UL_PAD_UART1_CTS_B__USDHC2_WP 0x008c 0x0318 0x069c 8 1 +#define MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS 0x0090 0x031c 0x0620 0 3 +#define MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS 0x0090 0x031c 0x0000 0 0 +#define MX6UL_PAD_UART1_RTS_B__ENET1_TX_ER 0x0090 0x031c 0x0000 1 0 +#define MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B 0x0090 0x031c 0x0668 2 1 +#define MX6UL_PAD_UART1_RTS_B__CSI_DATA05 0x0090 0x031c 0x04cc 3 1 +#define MX6UL_PAD_UART1_RTS_B__ENET2_1588_EVENT1_OUT 0x0090 0x031c 0x0000 4 0 +#define MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0090 0x031c 0x0000 5 0 +#define MX6UL_PAD_UART1_RTS_B__USDHC2_CD_B 0x0090 0x031c 0x0674 8 2 +#define MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x0094 0x0320 0x0000 0 0 +#define MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x0094 0x0320 0x062c 0 0 +#define MX6UL_PAD_UART2_TX_DATA__ENET1_TDATA02 0x0094 0x0320 0x0000 1 0 +#define MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x0094 0x0320 0x05bc 2 0 +#define MX6UL_PAD_UART2_TX_DATA__CSI_DATA06 0x0094 0x0320 0x04dc 3 0 +#define MX6UL_PAD_UART2_TX_DATA__GPT1_CAPTURE1 0x0094 0x0320 0x058c 4 1 +#define MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x0094 0x0320 0x0000 5 0 +#define MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0 0x0094 0x0320 0x0000 8 0 +#define MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0098 0x0324 0x062c 0 1 +#define MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x0098 0x0324 0x0000 0 0 +#define MX6UL_PAD_UART2_RX_DATA__ENET1_TDATA03 0x0098 0x0324 0x0000 1 0 +#define MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x0098 0x0324 0x05c0 2 0 +#define MX6UL_PAD_UART2_RX_DATA__CSI_DATA07 0x0098 0x0324 0x04e0 3 0 +#define MX6UL_PAD_UART2_RX_DATA__GPT1_CAPTURE2 0x0098 0x0324 0x0590 4 0 +#define MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x0098 0x0324 0x0000 5 0 +#define MX6UL_PAD_UART2_RX_DATA__SJC_DONE 0x0098 0x0324 0x0000 7 0 +#define MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x0098 0x0324 0x0554 8 0 +#define MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x009c 0x0328 0x0000 0 0 +#define MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS 0x009c 0x0328 0x0628 0 0 +#define MX6UL_PAD_UART2_CTS_B__ENET1_CRS 0x009c 0x0328 0x0000 1 0 +#define MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x009c 0x0328 0x0000 2 0 +#define MX6UL_PAD_UART2_CTS_B__CSI_DATA08 0x009c 0x0328 0x04e4 3 0 +#define MX6UL_PAD_UART2_CTS_B__GPT1_COMPARE2 0x009c 0x0328 0x0000 4 0 +#define MX6UL_PAD_UART2_CTS_B__GPIO1_IO22 0x009c 0x0328 0x0000 5 0 +#define MX6UL_PAD_UART2_CTS_B__SJC_DE_B 0x009c 0x0328 0x0000 7 0 +#define MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x009c 0x0328 0x055c 8 0 +#define MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x00a0 0x032c 0x0628 0 1 +#define MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS 0x00a0 0x032c 0x0000 0 0 +#define MX6UL_PAD_UART2_RTS_B__ENET1_COL 0x00a0 0x032c 0x0000 1 0 +#define MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x00a0 0x032c 0x0588 2 0 +#define MX6UL_PAD_UART2_RTS_B__CSI_DATA09 0x00a0 0x032c 0x04e8 3 0 +#define MX6UL_PAD_UART2_RTS_B__GPT1_COMPARE3 0x00a0 0x032c 0x0000 4 0 +#define MX6UL_PAD_UART2_RTS_B__GPIO1_IO23 0x00a0 0x032c 0x0000 5 0 +#define MX6UL_PAD_UART2_RTS_B__SJC_FAIL 0x00a0 0x032c 0x0000 7 0 +#define MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x00a0 0x032c 0x0558 8 0 +#define MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x00a4 0x0330 0x0000 0 0 +#define MX6UL_PAD_UART3_TX_DATA__UART3_DTE_RX 0x00a4 0x0330 0x0634 0 0 +#define MX6UL_PAD_UART3_TX_DATA__ENET2_RDATA02 0x00a4 0x0330 0x0000 1 0 +#define MX6UL_PAD_UART3_TX_DATA__SIM1_PORT0_PD 0x00a4 0x0330 0x0000 2 0 +#define MX6UL_PAD_UART3_TX_DATA__CSI_DATA01 0x00a4 0x0330 0x0000 3 0 +#define MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x00a4 0x0330 0x0000 4 0 +#define MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS 0x00a4 0x0330 0x0628 4 2 +#define MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x00a4 0x0330 0x0000 5 0 +#define MX6UL_PAD_UART3_TX_DATA__SJC_JTAG_ACT 0x00a4 0x0330 0x0000 7 0 +#define MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID 0x00a4 0x0330 0x04b8 8 1 +#define MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x00a8 0x0334 0x0634 0 1 +#define MX6UL_PAD_UART3_RX_DATA__UART3_DTE_TX 0x00a8 0x0334 0x0000 0 0 +#define MX6UL_PAD_UART3_RX_DATA__ENET2_RDATA03 0x00a8 0x0334 0x0000 1 0 +#define MX6UL_PAD_UART3_RX_DATA__SIM2_PORT0_PD 0x00a8 0x0334 0x0000 2 0 +#define MX6UL_PAD_UART3_RX_DATA__CSI_DATA00 0x00a8 0x0334 0x0000 3 0 +#define MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x00a8 0x0334 0x0628 4 3 +#define MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS 0x00a8 0x0334 0x0000 4 0 +#define MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x00a8 0x0334 0x0000 5 0 +#define MX6UL_PAD_UART3_RX_DATA__EPIT1_OUT 0x00a8 0x0334 0x0000 8 0 +#define MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x00ac 0x0338 0x0000 0 0 +#define MX6UL_PAD_UART3_CTS_B__UART3_DTE_RTS 0x00ac 0x0338 0x0630 0 0 +#define MX6UL_PAD_UART3_CTS_B__ENET2_RX_CLK 0x00ac 0x0338 0x0000 1 0 +#define MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x00ac 0x0338 0x0000 2 0 +#define MX6UL_PAD_UART3_CTS_B__CSI_DATA10 0x00ac 0x0338 0x0000 3 0 +#define MX6UL_PAD_UART3_CTS_B__ENET1_1588_EVENT1_IN 0x00ac 0x0338 0x0000 4 0 +#define MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x00ac 0x0338 0x0000 5 0 +#define MX6UL_PAD_UART3_CTS_B__EPIT2_OUT 0x00ac 0x0338 0x0000 8 0 +#define MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x00b0 0x033c 0x0630 0 1 +#define MX6UL_PAD_UART3_RTS_B__UART3_DTE_CTS 0x00b0 0x033c 0x0000 0 0 +#define MX6UL_PAD_UART3_RTS_B__ENET2_TX_ER 0x00b0 0x033c 0x0000 1 0 +#define MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x00b0 0x033c 0x0584 2 0 +#define MX6UL_PAD_UART3_RTS_B__CSI_DATA11 0x00b0 0x033c 0x0000 3 0 +#define MX6UL_PAD_UART3_RTS_B__ENET1_1588_EVENT1_OUT 0x00b0 0x033c 0x0000 4 0 +#define MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x00b0 0x033c 0x0000 5 0 +#define MX6UL_PAD_UART3_RTS_B__WDOG1_WDOG_B 0x00b0 0x033c 0x0000 8 0 +#define MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x00b4 0x0340 0x0000 0 0 +#define MX6UL_PAD_UART4_TX_DATA__UART4_DTE_RX 0x00b4 0x0340 0x063c 0 0 +#define MX6UL_PAD_UART4_TX_DATA__ENET2_TDATA02 0x00b4 0x0340 0x0000 1 0 +#define MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x00b4 0x0340 0x05a4 2 1 +#define MX6UL_PAD_UART4_TX_DATA__CSI_DATA12 0x00b4 0x0340 0x0000 3 0 +#define MX6UL_PAD_UART4_TX_DATA__CSU_CSU_ALARM_AUT02 0x00b4 0x0340 0x0000 4 0 +#define MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x00b4 0x0340 0x0000 5 0 +#define MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x00b4 0x0340 0x0544 8 1 +#define MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x00b8 0x0344 0x063c 0 1 +#define MX6UL_PAD_UART4_RX_DATA__UART4_DTE_TX 0x00b8 0x0344 0x0000 0 0 +#define MX6UL_PAD_UART4_RX_DATA__ENET2_TDATA03 0x00b8 0x0344 0x0000 1 0 +#define MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x00b8 0x0344 0x05a8 2 2 +#define MX6UL_PAD_UART4_RX_DATA__CSI_DATA13 0x00b8 0x0344 0x0000 3 0 +#define MX6UL_PAD_UART4_RX_DATA__CSU_CSU_ALARM_AUT01 0x00b8 0x0344 0x0000 4 0 +#define MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x00b8 0x0344 0x0000 5 0 +#define MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0 0x00b8 0x0344 0x0000 8 0 +#define MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x00bc 0x0348 0x0000 5 0 +#define MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x00bc 0x0348 0x054c 8 0 +#define MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x00bc 0x0348 0x0000 0 0 +#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00bc 0x0348 0x0644 0 4 +#define MX6UL_PAD_UART5_TX_DATA__ENET2_CRS 0x00bc 0x0348 0x0000 1 0 +#define MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x00bc 0x0348 0x05ac 2 2 +#define MX6UL_PAD_UART5_TX_DATA__CSI_DATA14 0x00bc 0x0348 0x0000 3 0 +#define MX6UL_PAD_UART5_TX_DATA__CSU_CSU_ALARM_AUT00 0x00bc 0x0348 0x0000 4 0 +#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00c0 0x034c 0x0644 0 5 +#define MX6UL_PAD_UART5_RX_DATA__UART5_DTE_TX 0x00c0 0x034c 0x0000 0 0 +#define MX6UL_PAD_UART5_RX_DATA__ENET2_COL 0x00c0 0x034c 0x0000 1 0 +#define MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x00c0 0x034c 0x05b0 2 2 +#define MX6UL_PAD_UART5_RX_DATA__CSI_DATA15 0x00c0 0x034c 0x0000 3 0 +#define MX6UL_PAD_UART5_RX_DATA__CSU_CSU_INT_DEB 0x00c0 0x034c 0x0000 4 0 +#define MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x00c0 0x034c 0x0000 5 0 +#define MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x00c0 0x034c 0x0548 8 1 +#define MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x00c4 0x0350 0x0000 0 0 +#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DCE_RTS 0x00c4 0x0350 0x0638 1 0 +#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DTE_CTS 0x00c4 0x0350 0x0000 1 0 +#define MX6UL_PAD_ENET1_RX_DATA0__PWM1_OUT 0x00c4 0x0350 0x0000 2 0 +#define MX6UL_PAD_ENET1_RX_DATA0__CSI_DATA16 0x00c4 0x0350 0x0000 3 0 +#define MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x00c4 0x0350 0x0000 4 0 +#define MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0x00c4 0x0350 0x0000 5 0 +#define MX6UL_PAD_ENET1_RX_DATA0__KPP_ROW00 0x00c4 0x0350 0x0000 6 0 +#define MX6UL_PAD_ENET1_RX_DATA0__USDHC1_LCTL 0x00c4 0x0350 0x0000 8 0 +#define MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x00c8 0x0354 0x0000 0 0 +#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DCE_CTS 0x00c8 0x0354 0x0000 1 0 +#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DTE_RTS 0x00c8 0x0354 0x0638 1 1 +#define MX6UL_PAD_ENET1_RX_DATA1__PWM2_OUT 0x00c8 0x0354 0x0000 2 0 +#define MX6UL_PAD_ENET1_RX_DATA1__CSI_DATA17 0x00c8 0x0354 0x0000 3 0 +#define MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x00c8 0x0354 0x0584 4 1 +#define MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0x00c8 0x0354 0x0000 5 0 +#define MX6UL_PAD_ENET1_RX_DATA1__KPP_COL00 0x00c8 0x0354 0x0000 6 0 +#define MX6UL_PAD_ENET1_RX_DATA1__USDHC2_LCTL 0x00c8 0x0354 0x0000 8 0 +#define MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x00cc 0x0358 0x0000 0 0 +#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00cc 0x0358 0x0640 1 3 +#define MX6UL_PAD_ENET1_RX_EN__UART5_DTE_CTS 0x00cc 0x0358 0x0000 1 0 +#define MX6UL_PAD_ENET1_RX_EN__CSI_DATA18 0x00cc 0x0358 0x0000 3 0 +#define MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x00cc 0x0358 0x0000 4 0 +#define MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02 0x00cc 0x0358 0x0000 5 0 +#define MX6UL_PAD_ENET1_RX_EN__KPP_ROW01 0x00cc 0x0358 0x0000 6 0 +#define MX6UL_PAD_ENET1_RX_EN__USDHC1_VSELECT 0x00cc 0x0358 0x0000 8 0 +#define MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x00d0 0x035c 0x0000 0 0 +#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DCE_CTS 0x00d0 0x035c 0x0000 1 0 +#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00d0 0x035c 0x0640 1 4 +#define MX6UL_PAD_ENET1_TX_DATA0__CSI_DATA19 0x00d0 0x035c 0x0000 3 0 +#define MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x00d0 0x035c 0x0588 4 1 +#define MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x00d0 0x035c 0x0000 5 0 +#define MX6UL_PAD_ENET1_TX_DATA0__KPP_COL01 0x00d0 0x035c 0x0000 6 0 +#define MX6UL_PAD_ENET1_TX_DATA0__USDHC2_VSELECT 0x00d0 0x035c 0x0000 8 0 +#define MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x00d4 0x0360 0x0000 0 0 +#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DCE_CTS 0x00d4 0x0360 0x0000 1 0 +#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DTE_RTS 0x00d4 0x0360 0x0648 1 2 +#define MX6UL_PAD_ENET1_TX_DATA1__PWM5_OUT 0x00d4 0x0360 0x0000 2 0 +#define MX6UL_PAD_ENET1_TX_DATA1__CSI_DATA20 0x00d4 0x0360 0x0000 3 0 +#define MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO 0x00d4 0x0360 0x0580 4 1 +#define MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0x00d4 0x0360 0x0000 5 0 +#define MX6UL_PAD_ENET1_TX_DATA1__KPP_ROW02 0x00d4 0x0360 0x0000 6 0 +#define MX6UL_PAD_ENET1_TX_DATA1__WDOG1_WDOG_RST_B_DEB 0x00d4 0x0360 0x0000 8 0 +#define MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x00d8 0x0364 0x0000 0 0 +#define MX6UL_PAD_ENET1_TX_EN__UART6_DCE_RTS 0x00d8 0x0364 0x0648 1 3 +#define MX6UL_PAD_ENET1_TX_EN__UART6_DTE_CTS 0x00d8 0x0364 0x0000 1 0 +#define MX6UL_PAD_ENET1_TX_EN__PWM6_OUT 0x00d8 0x0364 0x0000 2 0 +#define MX6UL_PAD_ENET1_TX_EN__CSI_DATA21 0x00d8 0x0364 0x0000 3 0 +#define MX6UL_PAD_ENET1_TX_EN__ENET2_MDC 0x00d8 0x0364 0x0000 4 0 +#define MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05 0x00d8 0x0364 0x0000 5 0 +#define MX6UL_PAD_ENET1_TX_EN__KPP_COL02 0x00d8 0x0364 0x0000 6 0 +#define MX6UL_PAD_ENET1_TX_EN__WDOG2_WDOG_RST_B_DEB 0x00d8 0x0364 0x0000 8 0 +#define MX6UL_PAD_ENET1_TX_CLK__ENET1_TX_CLK 0x00dc 0x0368 0x0000 0 0 +#define MX6UL_PAD_ENET1_TX_CLK__UART7_DCE_CTS 0x00dc 0x0368 0x0000 1 0 +#define MX6UL_PAD_ENET1_TX_CLK__UART7_DTE_RTS 0x00dc 0x0368 0x0650 1 0 +#define MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x00dc 0x0368 0x0000 2 0 +#define MX6UL_PAD_ENET1_TX_CLK__CSI_DATA22 0x00dc 0x0368 0x0000 3 0 +#define MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x00dc 0x0368 0x0574 4 2 +#define MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06 0x00dc 0x0368 0x0000 5 0 +#define MX6UL_PAD_ENET1_TX_CLK__KPP_ROW03 0x00dc 0x0368 0x0000 6 0 +#define MX6UL_PAD_ENET1_TX_CLK__GPT1_CLK 0x00dc 0x0368 0x0594 8 1 +#define MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x00e0 0x036c 0x0000 0 0 +#define MX6UL_PAD_ENET1_RX_ER__UART7_DCE_RTS 0x00e0 0x036c 0x0650 1 1 +#define MX6UL_PAD_ENET1_RX_ER__UART7_DTE_CTS 0x00e0 0x036c 0x0000 1 0 +#define MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x00e0 0x036c 0x0000 2 0 +#define MX6UL_PAD_ENET1_RX_ER__CSI_DATA23 0x00e0 0x036c 0x0000 3 0 +#define MX6UL_PAD_ENET1_RX_ER__EIM_CRE 0x00e0 0x036c 0x0000 4 0 +#define MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07 0x00e0 0x036c 0x0000 5 0 +#define MX6UL_PAD_ENET1_RX_ER__KPP_COL03 0x00e0 0x036c 0x0000 6 0 +#define MX6UL_PAD_ENET1_RX_ER__GPT1_CAPTURE2 0x00e0 0x036c 0x0590 8 1 +#define MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x00e4 0x0370 0x0000 0 0 +#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX 0x00e4 0x0370 0x0000 1 0 +#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DTE_RX 0x00e4 0x0370 0x064c 1 1 +#define MX6UL_PAD_ENET2_RX_DATA0__SIM1_PORT0_TRXD 0x00e4 0x0370 0x0000 2 0 +#define MX6UL_PAD_ENET2_RX_DATA0__I2C3_SCL 0x00e4 0x0370 0x05b4 3 1 +#define MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO 0x00e4 0x0370 0x0578 4 1 +#define MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x00e4 0x0370 0x0000 5 0 +#define MX6UL_PAD_ENET2_RX_DATA0__KPP_ROW04 0x00e4 0x0370 0x0000 6 0 +#define MX6UL_PAD_ENET2_RX_DATA0__USB_OTG1_PWR 0x00e4 0x0370 0x0000 8 0 +#define MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x00e8 0x0374 0x0000 0 0 +#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX 0x00e8 0x0374 0x064c 1 2 +#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DTE_TX 0x00e8 0x0374 0x0000 1 0 +#define MX6UL_PAD_ENET2_RX_DATA1__SIM1_PORT0_cLK 0x00e8 0x0374 0x0000 2 0 +#define MX6UL_PAD_ENET2_RX_DATA1__I2C3_SDA 0x00e8 0x0374 0x05b8 3 1 +#define MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC 0x00e8 0x0374 0x0000 4 0 +#define MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x00e8 0x0374 0x0000 5 0 +#define MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04 0x00e8 0x0374 0x0000 6 0 +#define MX6UL_PAD_ENET2_RX_DATA1__USB_OTG1_OC 0x00e8 0x0374 0x0664 8 1 +#define MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x00ec 0x0378 0x0000 0 0 +#define MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX 0x00ec 0x0378 0x0000 1 0 +#define MX6UL_PAD_ENET2_RX_EN__UART7_DTE_RX 0x00ec 0x0378 0x0654 1 0 +#define MX6UL_PAD_ENET2_RX_EN__SIM1_PORT0_RST_B 0x00ec 0x0378 0x0000 2 0 +#define MX6UL_PAD_ENET2_RX_EN__I2C4_SCL 0x00ec 0x0378 0x05bc 3 1 +#define MX6UL_PAD_ENET2_RX_EN__EIM_ADDR26 0x00ec 0x0378 0x0000 4 0 +#define MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x00ec 0x0378 0x0000 5 0 +#define MX6UL_PAD_ENET2_RX_EN__KPP_ROW05 0x00ec 0x0378 0x0000 6 0 +#define MX6UL_PAD_ENET2_RX_EN__ENET1_REF_CLK_25M 0x00ec 0x0378 0x0000 8 0 +#define MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x00f0 0x037c 0x0000 0 0 +#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX 0x00f0 0x037c 0x0654 1 1 +#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DTE_TX 0x00f0 0x037c 0x0000 1 0 +#define MX6UL_PAD_ENET2_TX_DATA0__SIM1_PORT0_SVEN 0x00f0 0x037c 0x0000 2 0 +#define MX6UL_PAD_ENET2_TX_DATA0__I2C4_SDA 0x00f0 0x037c 0x05c0 3 1 +#define MX6UL_PAD_ENET2_TX_DATA0__EIM_EB_B02 0x00f0 0x037c 0x0000 4 0 +#define MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x00f0 0x037c 0x0000 5 0 +#define MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05 0x00f0 0x037c 0x0000 6 0 +#define MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x00f4 0x0380 0x0000 0 0 +#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x00f4 0x0380 0x0000 1 0 +#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DTE_RX 0x00f4 0x0380 0x065c 1 0 +#define MX6UL_PAD_ENET2_TX_DATA1__SIM2_PORT0_TRXD 0x00f4 0x0380 0x0000 2 0 +#define MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK 0x00f4 0x0380 0x0564 3 0 +#define MX6UL_PAD_ENET2_TX_DATA1__EIM_EB_B03 0x00f4 0x0380 0x0000 4 0 +#define MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x00f4 0x0380 0x0000 5 0 +#define MX6UL_PAD_ENET2_TX_DATA1__KPP_ROW06 0x00f4 0x0380 0x0000 6 0 +#define MX6UL_PAD_ENET2_TX_DATA1__USB_OTG2_PWR 0x00f4 0x0380 0x0000 8 0 +#define MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x00f8 0x0384 0x0000 0 0 +#define MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x00f8 0x0384 0x065c 1 1 +#define MX6UL_PAD_ENET2_TX_EN__UART8_DTE_TX 0x00f8 0x0384 0x0000 1 0 +#define MX6UL_PAD_ENET2_TX_EN__SIM2_PORT0_cLK 0x00f8 0x0384 0x0000 2 0 +#define MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI 0x00f8 0x0384 0x056c 3 0 +#define MX6UL_PAD_ENET2_TX_EN__EIM_ACLK_FREERUN 0x00f8 0x0384 0x0000 4 0 +#define MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x00f8 0x0384 0x0000 5 0 +#define MX6UL_PAD_ENET2_TX_EN__KPP_COL06 0x00f8 0x0384 0x0000 6 0 +#define MX6UL_PAD_ENET2_TX_EN__USB_OTG2_OC 0x00f8 0x0384 0x0660 8 1 +#define MX6UL_PAD_ENET2_TX_CLK__ENET2_TX_CLK 0x00fc 0x0388 0x0000 0 0 +#define MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x00fc 0x0388 0x0000 1 0 +#define MX6UL_PAD_ENET2_TX_CLK__UART8_DTE_RTS 0x00fc 0x0388 0x0658 1 0 +#define MX6UL_PAD_ENET2_TX_CLK__SIM2_PORT0_RST_B 0x00fc 0x0388 0x0000 2 0 +#define MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO 0x00fc 0x0388 0x0568 3 0 +#define MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x00fc 0x0388 0x057c 4 2 +#define MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x00fc 0x0388 0x0000 5 0 +#define MX6UL_PAD_ENET2_TX_CLK__KPP_ROW07 0x00fc 0x0388 0x0000 6 0 +#define MX6UL_PAD_ENET2_TX_CLK__ANATOP_OTG2_ID 0x00fc 0x0388 0x04bc 8 1 +#define MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x0100 0x038c 0x0000 0 0 +#define MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x0100 0x038c 0x0658 1 1 +#define MX6UL_PAD_ENET2_RX_ER__UART8_DTE_CTS 0x0100 0x038c 0x0000 1 0 +#define MX6UL_PAD_ENET2_RX_ER__SIM2_PORT0_SVEN 0x0100 0x038c 0x0000 2 0 +#define MX6UL_PAD_ENET2_RX_ER__ECSPI4_SS0 0x0100 0x038c 0x0000 3 0 +#define MX6UL_PAD_ENET2_RX_ER__EIM_ADDR25 0x0100 0x038c 0x0000 4 0 +#define MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x0100 0x038c 0x0000 5 0 +#define MX6UL_PAD_ENET2_RX_ER__KPP_COL07 0x0100 0x038c 0x0000 6 0 +#define MX6UL_PAD_ENET2_RX_ER__WDOG1_WDOG_ANY 0x0100 0x038c 0x0000 8 0 +#define MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x0104 0x0390 0x0000 0 0 +#define MX6UL_PAD_LCD_CLK__LCDIF_WR_RWN 0x0104 0x0390 0x0000 1 0 +#define MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x0104 0x0390 0x0000 2 0 +#define MX6UL_PAD_LCD_CLK__UART4_DTE_RX 0x0104 0x0390 0x063c 2 2 +#define MX6UL_PAD_LCD_CLK__SAI3_MCLK 0x0104 0x0390 0x0000 3 0 +#define MX6UL_PAD_LCD_CLK__EIM_CS2_B 0x0104 0x0390 0x0000 4 0 +#define MX6UL_PAD_LCD_CLK__GPIO3_IO00 0x0104 0x0390 0x0000 5 0 +#define MX6UL_PAD_LCD_CLK__WDOG1_WDOG_RST_B_DEB 0x0104 0x0390 0x0000 8 0 +#define MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x0108 0x0394 0x0000 0 0 +#define MX6UL_PAD_LCD_ENABLE__LCDIF_RD_E 0x0108 0x0394 0x0000 1 0 +#define MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX 0x0108 0x0394 0x063c 2 3 +#define MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX 0x0108 0x0394 0x0000 2 0 +#define MX6UL_PAD_LCD_ENABLE__SAI3_TX_SYNC 0x0108 0x0394 0x060c 3 0 +#define MX6UL_PAD_LCD_ENABLE__EIM_CS3_B 0x0108 0x0394 0x0000 4 0 +#define MX6UL_PAD_LCD_ENABLE__GPIO3_IO01 0x0108 0x0394 0x0000 5 0 +#define MX6UL_PAD_LCD_ENABLE__ECSPI2_RDY 0x0108 0x0394 0x0000 8 0 +#define MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x010c 0x0398 0x05dc 0 0 +#define MX6UL_PAD_LCD_HSYNC__LCDIF_RS 0x010c 0x0398 0x0000 1 0 +#define MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS 0x010c 0x0398 0x0000 2 0 +#define MX6UL_PAD_LCD_HSYNC__UART4_DTE_RTS 0x010c 0x0398 0x0638 2 2 +#define MX6UL_PAD_LCD_HSYNC__SAI3_TX_BCLK 0x010c 0x0398 0x0608 3 0 +#define MX6UL_PAD_LCD_HSYNC__WDOG3_WDOG_RST_B_DEB 0x010c 0x0398 0x0000 4 0 +#define MX6UL_PAD_LCD_HSYNC__GPIO3_IO02 0x010c 0x0398 0x0000 5 0 +#define MX6UL_PAD_LCD_HSYNC__ECSPI2_SS1 0x010c 0x0398 0x0000 8 0 +#define MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x0110 0x039c 0x0000 0 0 +#define MX6UL_PAD_LCD_VSYNC__LCDIF_BUSY 0x0110 0x039c 0x05dc 1 1 +#define MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS 0x0110 0x039c 0x0638 2 3 +#define MX6UL_PAD_LCD_VSYNC__UART4_DTE_CTS 0x0110 0x039c 0x0000 2 0 +#define MX6UL_PAD_LCD_VSYNC__SAI3_RX_DATA 0x0110 0x039c 0x0000 3 0 +#define MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B 0x0110 0x039c 0x0000 4 0 +#define MX6UL_PAD_LCD_VSYNC__GPIO3_IO03 0x0110 0x039c 0x0000 5 0 +#define MX6UL_PAD_LCD_VSYNC__ECSPI2_SS2 0x0110 0x039c 0x0000 8 0 +#define MX6UL_PAD_LCD_RESET__LCDIF_RESET 0x0114 0x03a0 0x0000 0 0 +#define MX6UL_PAD_LCD_RESET__LCDIF_CS 0x0114 0x03a0 0x0000 1 0 +#define MX6UL_PAD_LCD_RESET__CA7_MX6UL_EVENTI 0x0114 0x03a0 0x0000 2 0 +#define MX6UL_PAD_LCD_RESET__SAI3_TX_DATA 0x0114 0x03a0 0x0000 3 0 +#define MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x0114 0x03a0 0x0000 4 0 +#define MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0114 0x03a0 0x0000 5 0 +#define MX6UL_PAD_LCD_RESET__ECSPI2_SS3 0x0114 0x03a0 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x0118 0x03a4 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA00__PWM1_OUT 0x0118 0x03a4 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA00__ENET1_1588_EVENT2_IN 0x0118 0x03a4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA00__I2C3_SDA 0x0118 0x03a4 0x05b8 4 2 +#define MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0x0118 0x03a4 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA00__SRC_BT_CFG00 0x0118 0x03a4 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA00__SAI1_MCLK 0x0118 0x03a4 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x011c 0x03a8 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA01__PWM2_OUT 0x011c 0x03a8 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA01__ENET1_1588_EVENT2_OUT 0x011c 0x03a8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA01__I2C3_SCL 0x011c 0x03a8 0x05b4 4 2 +#define MX6UL_PAD_LCD_DATA01__GPIO3_IO06 0x011c 0x03a8 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA01__SRC_BT_CFG01 0x011c 0x03a8 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA01__SAI1_TX_SYNC 0x011c 0x03a8 0x05ec 8 0 +#define MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x0120 0x03ac 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA02__PWM3_OUT 0x0120 0x03ac 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA02__ENET1_1588_EVENT3_IN 0x0120 0x03ac 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA02__I2C4_SDA 0x0120 0x03ac 0x05c0 4 2 +#define MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0x0120 0x03ac 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA02__SRC_BT_CFG02 0x0120 0x03ac 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA02__SAI1_TX_BCLK 0x0120 0x03ac 0x05e8 8 0 +#define MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x0124 0x03b0 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA03__PWM4_OUT 0x0124 0x03b0 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA03__ENET1_1588_EVENT3_OUT 0x0124 0x03b0 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA03__I2C4_SCL 0x0124 0x03b0 0x05bc 4 2 +#define MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0x0124 0x03b0 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA03__SRC_BT_CFG03 0x0124 0x03b0 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA03__SAI1_RX_DATA 0x0124 0x03b0 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x0128 0x03b4 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA04__UART8_DCE_CTS 0x0128 0x03b4 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA04__UART8_DTE_RTS 0x0128 0x03b4 0x0658 1 2 +#define MX6UL_PAD_LCD_DATA04__ENET2_1588_EVENT2_IN 0x0128 0x03b4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA04__SPDIF_SR_CLK 0x0128 0x03b4 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA04__GPIO3_IO09 0x0128 0x03b4 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA04__SRC_BT_CFG04 0x0128 0x03b4 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA04__SAI1_TX_DATA 0x0128 0x03b4 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x012c 0x03b8 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA05__UART8_DCE_RTS 0x012c 0x03b8 0x0658 1 3 +#define MX6UL_PAD_LCD_DATA05__UART8_DTE_CTS 0x012c 0x03b8 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA05__ENET2_1588_EVENT2_OUT 0x012c 0x03b8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA05__SPDIF_OUT 0x012c 0x03b8 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x012c 0x03b8 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA05__SRC_BT_CFG05 0x012c 0x03b8 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA05__ECSPI1_SS1 0x012c 0x03b8 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x0130 0x03bc 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA06__UART7_DCE_CTS 0x0130 0x03bc 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA06__UART7_DTE_RTS 0x0130 0x03bc 0x0650 1 2 +#define MX6UL_PAD_LCD_DATA06__ENET2_1588_EVENT3_IN 0x0130 0x03bc 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA06__SPDIF_LOCK 0x0130 0x03bc 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x0130 0x03bc 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA06__SRC_BT_CFG06 0x0130 0x03bc 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA06__ECSPI1_SS2 0x0130 0x03bc 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x0134 0x03c0 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA07__UART7_DCE_RTS 0x0134 0x03c0 0x0650 1 3 +#define MX6UL_PAD_LCD_DATA07__UART7_DTE_CTS 0x0134 0x03c0 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA07__ENET2_1588_EVENT3_OUT 0x0134 0x03c0 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA07__SPDIF_EXT_CLK 0x0134 0x03c0 0x061c 4 0 +#define MX6UL_PAD_LCD_DATA07__GPIO3_IO12 0x0134 0x03c0 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA07__SRC_BT_CFG07 0x0134 0x03c0 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA07__ECSPI1_SS3 0x0134 0x03c0 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x0138 0x03c4 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA08__SPDIF_IN 0x0138 0x03c4 0x0618 1 2 +#define MX6UL_PAD_LCD_DATA08__CSI_DATA16 0x0138 0x03c4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA08__EIM_DATA00 0x0138 0x03c4 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA08__GPIO3_IO13 0x0138 0x03c4 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA08__SRC_BT_CFG08 0x0138 0x03c4 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX 0x0138 0x03c4 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x013c 0x03c8 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA09__SAI3_MCLK 0x013c 0x03c8 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA09__CSI_DATA17 0x013c 0x03c8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA09__EIM_DATA01 0x013c 0x03c8 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA09__GPIO3_IO14 0x013c 0x03c8 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA09__SRC_BT_CFG09 0x013c 0x03c8 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX 0x013c 0x03c8 0x0584 8 2 +#define MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x0140 0x03cc 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA10__SAI3_RX_SYNC 0x0140 0x03cc 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA10__CSI_DATA18 0x0140 0x03cc 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA10__EIM_DATA02 0x0140 0x03cc 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA10__GPIO3_IO15 0x0140 0x03cc 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA10__SRC_BT_CFG10 0x0140 0x03cc 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX 0x0140 0x03cc 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x0144 0x03d0 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA11__SAI3_RX_BCLK 0x0144 0x03d0 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA11__CSI_DATA19 0x0144 0x03d0 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA11__EIM_DATA03 0x0144 0x03d0 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA11__GPIO3_IO16 0x0144 0x03d0 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA11__SRC_BT_CFG11 0x0144 0x03d0 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX 0x0144 0x03d0 0x0588 8 2 +#define MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x0148 0x03d4 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA12__SAI3_TX_SYNC 0x0148 0x03d4 0x060c 1 1 +#define MX6UL_PAD_LCD_DATA12__CSI_DATA20 0x0148 0x03d4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA12__EIM_DATA04 0x0148 0x03d4 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x0148 0x03d4 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA12__SRC_BT_CFG12 0x0148 0x03d4 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA12__ECSPI1_RDY 0x0148 0x03d4 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x014c 0x03d8 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA13__SAI3_TX_BCLK 0x014c 0x03d8 0x0608 1 1 +#define MX6UL_PAD_LCD_DATA13__CSI_DATA21 0x014c 0x03d8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA13__EIM_DATA05 0x014c 0x03d8 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA13__GPIO3_IO18 0x014c 0x03d8 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA13__SRC_BT_CFG13 0x014c 0x03d8 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA13__USDHC2_RESET_B 0x014c 0x03d8 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x0150 0x03dc 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA14__SAI3_RX_DATA 0x0150 0x03dc 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA14__CSI_DATA22 0x0150 0x03dc 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA14__EIM_DATA06 0x0150 0x03dc 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA14__GPIO3_IO19 0x0150 0x03dc 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA14__SRC_BT_CFG14 0x0150 0x03dc 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA14__USDHC2_DATA4 0x0150 0x03dc 0x068c 8 0 +#define MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x0154 0x03e0 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA15__SAI3_TX_DATA 0x0154 0x03e0 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA15__CSI_DATA23 0x0154 0x03e0 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA15__EIM_DATA07 0x0154 0x03e0 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA15__GPIO3_IO20 0x0154 0x03e0 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA15__SRC_BT_CFG15 0x0154 0x03e0 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA15__USDHC2_DATA5 0x0154 0x03e0 0x0690 8 0 +#define MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x0158 0x03e4 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x0158 0x03e4 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA16__UART7_DTE_RX 0x0158 0x03e4 0x0654 1 2 +#define MX6UL_PAD_LCD_DATA16__CSI_DATA01 0x0158 0x03e4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA16__EIM_DATA08 0x0158 0x03e4 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA16__GPIO3_IO21 0x0158 0x03e4 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA16__SRC_BT_CFG24 0x0158 0x03e4 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA16__USDHC2_DATA6 0x0158 0x03e4 0x0694 8 0 +#define MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x015c 0x03e8 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x015c 0x03e8 0x0654 1 3 +#define MX6UL_PAD_LCD_DATA17__UART7_DTE_TX 0x015c 0x03e8 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA17__CSI_DATA00 0x015c 0x03e8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA17__EIM_DATA09 0x015c 0x03e8 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA17__GPIO3_IO22 0x015c 0x03e8 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA17__SRC_BT_CFG25 0x015c 0x03e8 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA17__USDHC2_DATA7 0x015c 0x03e8 0x0698 8 0 +#define MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x0160 0x03ec 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA18__PWM5_OUT 0x0160 0x03ec 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA18__CA7_MX6UL_EVENTO 0x0160 0x03ec 0x0000 2 0 +#define MX6UL_PAD_LCD_DATA18__CSI_DATA10 0x0160 0x03ec 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA18__EIM_DATA10 0x0160 0x03ec 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x0160 0x03ec 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA18__SRC_BT_CFG26 0x0160 0x03ec 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x0160 0x03ec 0x0678 8 1 +#define MX6UL_PAD_LCD_DATA19__EIM_DATA11 0x0164 0x03f0 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x0164 0x03f0 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA19__SRC_BT_CFG27 0x0164 0x03f0 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x0164 0x03f0 0x0670 8 1 +#define MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x0164 0x03f0 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA19__PWM6_OUT 0x0164 0x03f0 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA19__WDOG1_WDOG_ANY 0x0164 0x03f0 0x0000 2 0 +#define MX6UL_PAD_LCD_DATA19__CSI_DATA11 0x0164 0x03f0 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA20__EIM_DATA12 0x0168 0x03f4 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA20__GPIO3_IO25 0x0168 0x03f4 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA20__SRC_BT_CFG28 0x0168 0x03f4 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x0168 0x03f4 0x067c 8 1 +#define MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x0168 0x03f4 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA20__UART8_DCE_TX 0x0168 0x03f4 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA20__UART8_DTE_RX 0x0168 0x03f4 0x065c 1 2 +#define MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x0168 0x03f4 0x0534 2 0 +#define MX6UL_PAD_LCD_DATA20__CSI_DATA12 0x0168 0x03f4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x016c 0x03f8 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA21__UART8_DCE_RX 0x016c 0x03f8 0x065c 1 3 +#define MX6UL_PAD_LCD_DATA21__UART8_DTE_TX 0x016c 0x03f8 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA21__ECSPI1_SS0 0x016c 0x03f8 0x0000 2 0 +#define MX6UL_PAD_LCD_DATA21__CSI_DATA13 0x016c 0x03f8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA21__EIM_DATA13 0x016c 0x03f8 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x016c 0x03f8 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA21__SRC_BT_CFG29 0x016c 0x03f8 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x016c 0x03f8 0x0680 8 1 +#define MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x0170 0x03fc 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA22__MQS_RIGHT 0x0170 0x03fc 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x0170 0x03fc 0x053c 2 0 +#define MX6UL_PAD_LCD_DATA22__CSI_DATA14 0x0170 0x03fc 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA22__EIM_DATA14 0x0170 0x03fc 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA22__GPIO3_IO27 0x0170 0x03fc 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA22__SRC_BT_CFG30 0x0170 0x03fc 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x0170 0x03fc 0x0684 8 0 +#define MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x0174 0x0400 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA23__MQS_LEFT 0x0174 0x0400 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x0174 0x0400 0x0538 2 0 +#define MX6UL_PAD_LCD_DATA23__CSI_DATA15 0x0174 0x0400 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA23__EIM_DATA15 0x0174 0x0400 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA23__GPIO3_IO28 0x0174 0x0400 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA23__SRC_BT_CFG31 0x0174 0x0400 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x0174 0x0400 0x0688 8 1 +#define MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0178 0x0404 0x0000 0 0 +#define MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x0178 0x0404 0x0670 1 2 +#define MX6UL_PAD_NAND_RE_B__QSPI_B_SCLK 0x0178 0x0404 0x0000 2 0 +#define MX6UL_PAD_NAND_RE_B__KPP_ROW00 0x0178 0x0404 0x0000 3 0 +#define MX6UL_PAD_NAND_RE_B__EIM_EB_B00 0x0178 0x0404 0x0000 4 0 +#define MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0178 0x0404 0x0000 5 0 +#define MX6UL_PAD_NAND_RE_B__ECSPI3_SS2 0x0178 0x0404 0x0000 8 0 +#define MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x017c 0x0408 0x0000 0 0 +#define MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x017c 0x0408 0x0678 1 2 +#define MX6UL_PAD_NAND_WE_B__QSPI_B_SS0_B 0x017c 0x0408 0x0000 2 0 +#define MX6UL_PAD_NAND_WE_B__KPP_COL00 0x017c 0x0408 0x0000 3 0 +#define MX6UL_PAD_NAND_WE_B__EIM_EB_B01 0x017c 0x0408 0x0000 4 0 +#define MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x017c 0x0408 0x0000 5 0 +#define MX6UL_PAD_NAND_WE_B__ECSPI3_SS3 0x017c 0x0408 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0180 0x040c 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x0180 0x040c 0x067c 1 2 +#define MX6UL_PAD_NAND_DATA00__QSPI_B_SS1_B 0x0180 0x040c 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA00__KPP_ROW01 0x0180 0x040c 0x0000 3 0 +#define MX6UL_PAD_NAND_DATA00__EIM_AD08 0x0180 0x040c 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x0180 0x040c 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA00__ECSPI4_RDY 0x0180 0x040c 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0184 0x0410 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x0184 0x0410 0x0680 1 2 +#define MX6UL_PAD_NAND_DATA01__QSPI_B_DQS 0x0184 0x0410 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA01__KPP_COL01 0x0184 0x0410 0x0000 3 0 +#define MX6UL_PAD_NAND_DATA01__EIM_AD09 0x0184 0x0410 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x0184 0x0410 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA01__ECSPI4_SS1 0x0184 0x0410 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0188 0x0414 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x0188 0x0414 0x0684 1 1 +#define MX6UL_PAD_NAND_DATA02__QSPI_B_DATA00 0x0188 0x0414 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA02__KPP_ROW02 0x0188 0x0414 0x0000 3 0 +#define MX6UL_PAD_NAND_DATA02__EIM_AD10 0x0188 0x0414 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA02__GPIO4_IO04 0x0188 0x0414 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA02__ECSPI4_SS2 0x0188 0x0414 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x018c 0x0418 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x018c 0x0418 0x0688 1 2 +#define MX6UL_PAD_NAND_DATA03__QSPI_B_DATA01 0x018c 0x0418 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA03__KPP_COL02 0x018c 0x0418 0x0000 3 0 +#define MX6UL_PAD_NAND_DATA03__EIM_AD11 0x018c 0x0418 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA03__GPIO4_IO05 0x018c 0x0418 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA03__ECSPI4_SS3 0x018c 0x0418 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0190 0x041c 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x0190 0x041c 0x068c 1 1 +#define MX6UL_PAD_NAND_DATA04__QSPI_B_DATA02 0x0190 0x041c 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x0190 0x041c 0x0564 3 1 +#define MX6UL_PAD_NAND_DATA04__EIM_AD12 0x0190 0x041c 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA04__GPIO4_IO06 0x0190 0x041c 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA04__UART2_DCE_TX 0x0190 0x041c 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA04__UART2_DTE_RX 0x0190 0x041c 0x062c 8 2 +#define MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0194 0x0420 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x0194 0x0420 0x0690 1 1 +#define MX6UL_PAD_NAND_DATA05__QSPI_B_DATA03 0x0194 0x0420 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x0194 0x0420 0x056c 3 1 +#define MX6UL_PAD_NAND_DATA05__EIM_AD13 0x0194 0x0420 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA05__GPIO4_IO07 0x0194 0x0420 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA05__UART2_DCE_RX 0x0194 0x0420 0x062c 8 3 +#define MX6UL_PAD_NAND_DATA05__UART2_DTE_TX 0x0194 0x0420 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0198 0x0424 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x0198 0x0424 0x0694 1 1 +#define MX6UL_PAD_NAND_DATA06__SAI2_RX_BCLK 0x0198 0x0424 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x0198 0x0424 0x0568 3 1 +#define MX6UL_PAD_NAND_DATA06__EIM_AD14 0x0198 0x0424 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA06__GPIO4_IO08 0x0198 0x0424 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS 0x0198 0x0424 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA06__UART2_DTE_RTS 0x0198 0x0424 0x0628 8 4 +#define MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x019c 0x0428 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x019c 0x0428 0x0698 1 1 +#define MX6UL_PAD_NAND_DATA07__QSPI_A_SS1_B 0x019c 0x0428 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA07__ECSPI4_SS0 0x019c 0x0428 0x0000 3 0 +#define MX6UL_PAD_NAND_DATA07__EIM_AD15 0x019c 0x0428 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x019c 0x0428 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x019c 0x0428 0x0628 8 5 +#define MX6UL_PAD_NAND_DATA07__UART2_DTE_CTS 0x019c 0x0428 0x0000 8 0 +#define MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x01a0 0x042c 0x0000 0 0 +#define MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x01a0 0x042c 0x0000 1 0 +#define MX6UL_PAD_NAND_ALE__QSPI_A_DQS 0x01a0 0x042c 0x0000 2 0 +#define MX6UL_PAD_NAND_ALE__PWM3_OUT 0x01a0 0x042c 0x0000 3 0 +#define MX6UL_PAD_NAND_ALE__EIM_ADDR17 0x01a0 0x042c 0x0000 4 0 +#define MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x01a0 0x042c 0x0000 5 0 +#define MX6UL_PAD_NAND_ALE__ECSPI3_SS1 0x01a0 0x042c 0x0000 8 0 +#define MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x01a4 0x0430 0x0000 0 0 +#define MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B 0x01a4 0x0430 0x0000 1 0 +#define MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x01a4 0x0430 0x0000 2 0 +#define MX6UL_PAD_NAND_WP_B__PWM4_OUT 0x01a4 0x0430 0x0000 3 0 +#define MX6UL_PAD_NAND_WP_B__EIM_BCLK 0x01a4 0x0430 0x0000 4 0 +#define MX6UL_PAD_NAND_WP_B__GPIO4_IO11 0x01a4 0x0430 0x0000 5 0 +#define MX6UL_PAD_NAND_WP_B__ECSPI3_RDY 0x01a4 0x0430 0x0000 8 0 +#define MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x01a8 0x0434 0x0000 0 0 +#define MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x01a8 0x0434 0x0000 1 0 +#define MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x01a8 0x0434 0x0000 2 0 +#define MX6UL_PAD_NAND_READY_B__ECSPI3_SS0 0x01a8 0x0434 0x0000 3 0 +#define MX6UL_PAD_NAND_READY_B__EIM_CS1_B 0x01a8 0x0434 0x0000 4 0 +#define MX6UL_PAD_NAND_READY_B__GPIO4_IO12 0x01a8 0x0434 0x0000 5 0 +#define MX6UL_PAD_NAND_READY_B__UART3_DCE_TX 0x01a8 0x0434 0x0000 8 0 +#define MX6UL_PAD_NAND_READY_B__UART3_DTE_RX 0x01a8 0x0434 0x0634 8 2 +#define MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x01ac 0x0438 0x0000 0 0 +#define MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x01ac 0x0438 0x0000 1 0 +#define MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x01ac 0x0438 0x0000 2 0 +#define MX6UL_PAD_NAND_CE0_B__ECSPI3_SCLK 0x01ac 0x0438 0x0554 3 1 +#define MX6UL_PAD_NAND_CE0_B__EIM_DTACK_B 0x01ac 0x0438 0x0000 4 0 +#define MX6UL_PAD_NAND_CE0_B__GPIO4_IO13 0x01ac 0x0438 0x0000 5 0 +#define MX6UL_PAD_NAND_CE0_B__UART3_DCE_RX 0x01ac 0x0438 0x0634 8 3 +#define MX6UL_PAD_NAND_CE0_B__UART3_DTE_TX 0x01ac 0x0438 0x0000 8 0 +#define MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B 0x01b0 0x043c 0x0000 0 0 +#define MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x01b0 0x043c 0x0000 1 0 +#define MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x01b0 0x043c 0x0000 2 0 +#define MX6UL_PAD_NAND_CE1_B__ECSPI3_MOSI 0x01b0 0x043c 0x055c 3 1 +#define MX6UL_PAD_NAND_CE1_B__EIM_ADDR18 0x01b0 0x043c 0x0000 4 0 +#define MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x01b0 0x043c 0x0000 5 0 +#define MX6UL_PAD_NAND_CE1_B__UART3_DCE_CTS 0x01b0 0x043c 0x0000 8 0 +#define MX6UL_PAD_NAND_CE1_B__UART3_DTE_RTS 0x01b0 0x043c 0x0630 8 2 +#define MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x01b4 0x0440 0x0000 0 0 +#define MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x01b4 0x0440 0x0000 1 0 +#define MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x01b4 0x0440 0x0000 2 0 +#define MX6UL_PAD_NAND_CLE__ECSPI3_MISO 0x01b4 0x0440 0x0558 3 1 +#define MX6UL_PAD_NAND_CLE__EIM_ADDR16 0x01b4 0x0440 0x0000 4 0 +#define MX6UL_PAD_NAND_CLE__GPIO4_IO15 0x01b4 0x0440 0x0000 5 0 +#define MX6UL_PAD_NAND_CLE__UART3_DCE_RTS 0x01b4 0x0440 0x0630 8 3 +#define MX6UL_PAD_NAND_CLE__UART3_DTE_CTS 0x01b4 0x0440 0x0000 8 0 +#define MX6UL_PAD_NAND_DQS__RAWNAND_DQS 0x01b8 0x0444 0x0000 0 0 +#define MX6UL_PAD_NAND_DQS__CSI_FIELD 0x01b8 0x0444 0x0530 1 1 +#define MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x01b8 0x0444 0x0000 2 0 +#define MX6UL_PAD_NAND_DQS__PWM5_OUT 0x01b8 0x0444 0x0000 3 0 +#define MX6UL_PAD_NAND_DQS__EIM_WAIT 0x01b8 0x0444 0x0000 4 0 +#define MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x01b8 0x0444 0x0000 5 0 +#define MX6UL_PAD_NAND_DQS__SDMA_EXT_EVENT01 0x01b8 0x0444 0x0000 6 0 +#define MX6UL_PAD_NAND_DQS__SPDIF_EXT_CLK 0x01b8 0x0444 0x061c 8 1 +#define MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x01bc 0x0448 0x0000 0 0 +#define MX6UL_PAD_SD1_CMD__GPT2_COMPARE1 0x01bc 0x0448 0x0000 1 0 +#define MX6UL_PAD_SD1_CMD__SAI2_RX_SYNC 0x01bc 0x0448 0x0000 2 0 +#define MX6UL_PAD_SD1_CMD__SPDIF_OUT 0x01bc 0x0448 0x0000 3 0 +#define MX6UL_PAD_SD1_CMD__EIM_ADDR19 0x01bc 0x0448 0x0000 4 0 +#define MX6UL_PAD_SD1_CMD__GPIO2_IO16 0x01bc 0x0448 0x0000 5 0 +#define MX6UL_PAD_SD1_CMD__SDMA_EXT_EVENT00 0x01bc 0x0448 0x0000 6 0 +#define MX6UL_PAD_SD1_CMD__USB_OTG1_PWR 0x01bc 0x0448 0x0000 8 0 +#define MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x01c0 0x044c 0x0000 0 0 +#define MX6UL_PAD_SD1_CLK__GPT2_COMPARE2 0x01c0 0x044c 0x0000 1 0 +#define MX6UL_PAD_SD1_CLK__SAI2_MCLK 0x01c0 0x044c 0x0000 2 0 +#define MX6UL_PAD_SD1_CLK__SPDIF_IN 0x01c0 0x044c 0x0618 3 3 +#define MX6UL_PAD_SD1_CLK__EIM_ADDR20 0x01c0 0x044c 0x0000 4 0 +#define MX6UL_PAD_SD1_CLK__GPIO2_IO17 0x01c0 0x044c 0x0000 5 0 +#define MX6UL_PAD_SD1_CLK__USB_OTG1_OC 0x01c0 0x044c 0x0664 8 2 +#define MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x01c4 0x0450 0x0000 0 0 +#define MX6UL_PAD_SD1_DATA0__GPT2_COMPARE3 0x01c4 0x0450 0x0000 1 0 +#define MX6UL_PAD_SD1_DATA0__SAI2_TX_SYNC 0x01c4 0x0450 0x05fc 2 1 +#define MX6UL_PAD_SD1_DATA0__FLEXCAN1_TX 0x01c4 0x0450 0x0000 3 0 +#define MX6UL_PAD_SD1_DATA0__EIM_ADDR21 0x01c4 0x0450 0x0000 4 0 +#define MX6UL_PAD_SD1_DATA0__GPIO2_IO18 0x01c4 0x0450 0x0000 5 0 +#define MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID 0x01c4 0x0450 0x04b8 8 2 +#define MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x01c8 0x0454 0x0000 0 0 +#define MX6UL_PAD_SD1_DATA1__GPT2_CLK 0x01c8 0x0454 0x05a0 1 1 +#define MX6UL_PAD_SD1_DATA1__SAI2_TX_BCLK 0x01c8 0x0454 0x05f8 2 1 +#define MX6UL_PAD_SD1_DATA1__FLEXCAN1_RX 0x01c8 0x0454 0x0584 3 3 +#define MX6UL_PAD_SD1_DATA1__EIM_ADDR22 0x01c8 0x0454 0x0000 4 0 +#define MX6UL_PAD_SD1_DATA1__GPIO2_IO19 0x01c8 0x0454 0x0000 5 0 +#define MX6UL_PAD_SD1_DATA1__USB_OTG2_PWR 0x01c8 0x0454 0x0000 8 0 +#define MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x01cc 0x0458 0x0000 0 0 +#define MX6UL_PAD_SD1_DATA2__GPT2_CAPTURE1 0x01cc 0x0458 0x0598 1 1 +#define MX6UL_PAD_SD1_DATA2__SAI2_RX_DATA 0x01cc 0x0458 0x05f4 2 1 +#define MX6UL_PAD_SD1_DATA2__FLEXCAN2_TX 0x01cc 0x0458 0x0000 3 0 +#define MX6UL_PAD_SD1_DATA2__EIM_ADDR23 0x01cc 0x0458 0x0000 4 0 +#define MX6UL_PAD_SD1_DATA2__GPIO2_IO20 0x01cc 0x0458 0x0000 5 0 +#define MX6UL_PAD_SD1_DATA2__CCM_CLKO1 0x01cc 0x0458 0x0000 6 0 +#define MX6UL_PAD_SD1_DATA2__USB_OTG2_OC 0x01cc 0x0458 0x0660 8 2 +#define MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x01d0 0x045c 0x0000 0 0 +#define MX6UL_PAD_SD1_DATA3__GPT2_CAPTURE2 0x01d0 0x045c 0x059c 1 1 +#define MX6UL_PAD_SD1_DATA3__SAI2_TX_DATA 0x01d0 0x045c 0x0000 2 0 +#define MX6UL_PAD_SD1_DATA3__FLEXCAN2_RX 0x01d0 0x045c 0x0588 3 3 +#define MX6UL_PAD_SD1_DATA3__EIM_ADDR24 0x01d0 0x045c 0x0000 4 0 +#define MX6UL_PAD_SD1_DATA3__GPIO2_IO21 0x01d0 0x045c 0x0000 5 0 +#define MX6UL_PAD_SD1_DATA3__CCM_CLKO2 0x01d0 0x045c 0x0000 6 0 +#define MX6UL_PAD_SD1_DATA3__ANATOP_OTG2_ID 0x01d0 0x045c 0x04bc 8 2 +#define MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x01d4 0x0460 0x0000 0 0 +#define MX6UL_PAD_CSI_MCLK__USDHC2_CD_B 0x01d4 0x0460 0x0674 1 0 +#define MX6UL_PAD_CSI_MCLK__RAWNAND_CE2_B 0x01d4 0x0460 0x0000 2 0 +#define MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x01d4 0x0460 0x05a8 3 0 +#define MX6UL_PAD_CSI_MCLK__EIM_CS0_B 0x01d4 0x0460 0x0000 4 0 +#define MX6UL_PAD_CSI_MCLK__GPIO4_IO17 0x01d4 0x0460 0x0000 5 0 +#define MX6UL_PAD_CSI_MCLK__SNVS_HP_VIO_5_CTL 0x01d4 0x0460 0x0000 6 0 +#define MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x01d4 0x0460 0x0000 8 0 +#define MX6UL_PAD_CSI_MCLK__UART6_DTE_RX 0x01d4 0x0460 0x064c 8 0 +#define MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x01d8 0x0464 0x0528 0 1 +#define MX6UL_PAD_CSI_PIXCLK__USDHC2_WP 0x01d8 0x0464 0x069c 1 2 +#define MX6UL_PAD_CSI_PIXCLK__RAWNAND_CE3_B 0x01d8 0x0464 0x0000 2 0 +#define MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x01d8 0x0464 0x05a4 3 2 +#define MX6UL_PAD_CSI_PIXCLK__EIM_OE 0x01d8 0x0464 0x0000 4 0 +#define MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18 0x01d8 0x0464 0x0000 5 0 +#define MX6UL_PAD_CSI_PIXCLK__SNVS_HP_VIO_5 0x01d8 0x0464 0x0000 6 0 +#define MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x01d8 0x0464 0x064c 8 3 +#define MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX 0x01d8 0x0464 0x0000 8 0 +#define MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x01dc 0x0468 0x052c 0 0 +#define MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x01dc 0x0468 0x0670 1 0 +#define MX6UL_PAD_CSI_VSYNC__SIM1_PORT1_CLK 0x01dc 0x0468 0x0000 2 0 +#define MX6UL_PAD_CSI_VSYNC__I2C2_SDA 0x01dc 0x0468 0x05b0 3 0 +#define MX6UL_PAD_CSI_VSYNC__EIM_RW 0x01dc 0x0468 0x0000 4 0 +#define MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x01dc 0x0468 0x0000 5 0 +#define MX6UL_PAD_CSI_VSYNC__PWM7_OUT 0x01dc 0x0468 0x0000 6 0 +#define MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS 0x01dc 0x0468 0x0648 8 0 +#define MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS 0x01dc 0x0468 0x0000 8 0 +#define MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x01e0 0x046c 0x0524 0 0 +#define MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x01e0 0x046c 0x0678 1 0 +#define MX6UL_PAD_CSI_HSYNC__SIM1_PORT1_PD 0x01e0 0x046c 0x0000 2 0 +#define MX6UL_PAD_CSI_HSYNC__I2C2_SCL 0x01e0 0x046c 0x05ac 3 0 +#define MX6UL_PAD_CSI_HSYNC__EIM_LBA_B 0x01e0 0x046c 0x0000 4 0 +#define MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x01e0 0x046c 0x0000 5 0 +#define MX6UL_PAD_CSI_HSYNC__PWM8_OUT 0x01e0 0x046c 0x0000 6 0 +#define MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS 0x01e0 0x046c 0x0000 8 0 +#define MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS 0x01e0 0x046c 0x0648 8 1 +#define MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x01e4 0x0470 0x04c4 0 0 +#define MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x01e4 0x0470 0x067c 1 0 +#define MX6UL_PAD_CSI_DATA00__SIM1_PORT1_RST_B 0x01e4 0x0470 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x01e4 0x0470 0x0544 3 0 +#define MX6UL_PAD_CSI_DATA00__EIM_AD00 0x01e4 0x0470 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x01e4 0x0470 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA00__SRC_INT_BOOT 0x01e4 0x0470 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA00__UART5_DCE_TX 0x01e4 0x0470 0x0000 8 0 +#define MX6UL_PAD_CSI_DATA00__UART5_DTE_RX 0x01e4 0x0470 0x0644 8 0 +#define MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x01e8 0x0474 0x04c8 0 0 +#define MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x01e8 0x0474 0x0680 1 0 +#define MX6UL_PAD_CSI_DATA01__SIM1_PORT1_SVEN 0x01e8 0x0474 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA01__ECSPI2_SS0 0x01e8 0x0474 0x0000 3 0 +#define MX6UL_PAD_CSI_DATA01__EIM_AD01 0x01e8 0x0474 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x01e8 0x0474 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA01__SAI1_MCLK 0x01e8 0x0474 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA01__UART5_DCE_RX 0x01e8 0x0474 0x0644 8 1 +#define MX6UL_PAD_CSI_DATA01__UART5_DTE_TX 0x01e8 0x0474 0x0000 8 0 +#define MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x01ec 0x0478 0x04d8 0 1 +#define MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x01ec 0x0478 0x0684 1 2 +#define MX6UL_PAD_CSI_DATA02__SIM1_PORT1_TRXD 0x01ec 0x0478 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x01ec 0x0478 0x054c 3 1 +#define MX6UL_PAD_CSI_DATA02__EIM_AD02 0x01ec 0x0478 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x01ec 0x0478 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA02__SAI1_RX_SYNC 0x01ec 0x0478 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01ec 0x0478 0x0640 8 5 +#define MX6UL_PAD_CSI_DATA02__UART5_DTE_CTS 0x01ec 0x0478 0x0000 8 0 +#define MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x01f0 0x047c 0x04cc 0 0 +#define MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x01f0 0x047c 0x0688 1 0 +#define MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD 0x01f0 0x047c 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x01f0 0x047c 0x0548 3 0 +#define MX6UL_PAD_CSI_DATA03__EIM_AD03 0x01f0 0x047c 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x01f0 0x047c 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA03__SAI1_RX_BCLK 0x01f0 0x047c 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA03__UART5_DCE_CTS 0x01f0 0x047c 0x0000 8 0 +#define MX6UL_PAD_CSI_DATA03__UART5_DTE_RTS 0x01f0 0x047c 0x0640 8 0 +#define MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x01f4 0x0480 0x04dc 0 1 +#define MX6UL_PAD_CSI_DATA04__USDHC2_DATA4 0x01f4 0x0480 0x068c 1 2 +#define MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK 0x01f4 0x0480 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x01f4 0x0480 0x0534 3 1 +#define MX6UL_PAD_CSI_DATA04__EIM_AD04 0x01f4 0x0480 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x01f4 0x0480 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC 0x01f4 0x0480 0x05ec 6 1 +#define MX6UL_PAD_CSI_DATA04__USDHC1_WP 0x01f4 0x0480 0x066c 8 2 +#define MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x01f8 0x0484 0x04e0 0 1 +#define MX6UL_PAD_CSI_DATA05__USDHC2_DATA5 0x01f8 0x0484 0x0690 1 2 +#define MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B 0x01f8 0x0484 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA05__ECSPI1_SS0 0x01f8 0x0484 0x0000 3 0 +#define MX6UL_PAD_CSI_DATA05__EIM_AD05 0x01f8 0x0484 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x01f8 0x0484 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x01f8 0x0484 0x05e8 6 1 +#define MX6UL_PAD_CSI_DATA05__USDHC1_CD_B 0x01f8 0x0484 0x0668 8 2 +#define MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x01fc 0x0488 0x04e4 0 1 +#define MX6UL_PAD_CSI_DATA06__USDHC2_DATA6 0x01fc 0x0488 0x0694 1 2 +#define MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN 0x01fc 0x0488 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x01fc 0x0488 0x053c 3 1 +#define MX6UL_PAD_CSI_DATA06__EIM_AD06 0x01fc 0x0488 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x01fc 0x0488 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x01fc 0x0488 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA06__USDHC1_RESET_B 0x01fc 0x0488 0x0000 8 0 +#define MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x0200 0x048c 0x04e8 0 1 +#define MX6UL_PAD_CSI_DATA07__USDHC2_DATA7 0x0200 0x048c 0x0698 1 2 +#define MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD 0x0200 0x048c 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x0200 0x048c 0x0538 3 1 +#define MX6UL_PAD_CSI_DATA07__EIM_AD07 0x0200 0x048c 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x0200 0x048c 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA 0x0200 0x048c 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA07__USDHC1_VSELECT 0x0200 0x048c 0x0000 8 0 #endif /* __DTS_IMX6UL_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 99b646506fc9..71778992f03d 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/imx6ul-clock.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "imx6ul-pinfunc.h" #include "skeleton.dtsi" @@ -140,6 +141,39 @@ reg = <0x00900000 0x20000>; }; + dma_apbh: dma-apbh@01804000 { + compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x01804000 0x2000>; + interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>, + <0 13 IRQ_TYPE_LEVEL_HIGH>, + <0 13 IRQ_TYPE_LEVEL_HIGH>, + <0 13 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <4>; + clocks = <&clks IMX6UL_CLK_APBHDMA>; + }; + + gpmi: gpmi-nand@01806000 { + compatible = "fsl,imx6q-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01806000 0x2000>, <0x01808000 0x2000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "bch"; + clocks = <&clks IMX6UL_CLK_GPMI_IO>, + <&clks IMX6UL_CLK_GPMI_APB>, + <&clks IMX6UL_CLK_GPMI_BCH>, + <&clks IMX6UL_CLK_GPMI_BCH_APB>, + <&clks IMX6UL_CLK_PER_BCH>; + clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", + "gpmi_bch_apb", "per1_bch"; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + status = "disabled"; + }; + aips1: aips-bus@02000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; @@ -234,6 +268,126 @@ clock-names = "ipg", "per"; status = "disabled"; }; + + sai1: sai@02028000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai"; + reg = <0x02028000 0x4000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_SAI1_IPG>, + <&clks IMX6UL_CLK_SAI1>, + <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma 35 24 0>, + <&sdma 36 24 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai2: sai@0202c000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai"; + reg = <0x0202c000 0x4000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_SAI2_IPG>, + <&clks IMX6UL_CLK_SAI2>, + <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma 37 24 0>, + <&sdma 38 24 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai3: sai@02030000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai"; + reg = <0x02030000 0x4000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_SAI3_IPG>, + <&clks IMX6UL_CLK_SAI3>, + <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma 39 24 0>, + <&sdma 40 24 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + }; + + tsc: tsc@02040000 { + compatible = "fsl,imx6ul-tsc"; + reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_IPG>, + <&clks IMX6UL_CLK_ADC2>; + clock-names = "tsc", "adc"; + status = "disabled"; + }; + + pwm1: pwm@02080000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x02080000 0x4000>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_PWM1>, + <&clks IMX6UL_CLK_PWM1>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@02084000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x02084000 0x4000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_PWM2>, + <&clks IMX6UL_CLK_PWM2>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@02088000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x02088000 0x4000>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_PWM3>, + <&clks IMX6UL_CLK_PWM3>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@0208c000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x0208c000 0x4000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_PWM4>, + <&clks IMX6UL_CLK_PWM4>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + can1: flexcan@02090000 { + compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; + reg = <0x02090000 0x4000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_CAN1_IPG>, + <&clks IMX6UL_CLK_CAN1_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + can2: flexcan@02094000 { + compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; + reg = <0x02094000 0x4000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_CAN2_IPG>, + <&clks IMX6UL_CLK_CAN2_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; }; gpt1: gpt@02098000 { @@ -317,6 +471,14 @@ status = "disabled"; }; + kpp: kpp@020b8000 { + compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp"; + reg = <0x020b8000 0x4000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_KPP>; + status = "disabled"; + }; + wdog1: wdog@020bc000 { compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; @@ -487,49 +649,65 @@ compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt"; reg = <0x020e8000 0x4000>; interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_DUMMY>, - <&clks IMX6UL_CLK_DUMMY>; + clocks = <&clks IMX6UL_CLK_GPT2_BUS>, + <&clks IMX6UL_CLK_GPT2_SERIAL>; clock-names = "ipg", "per"; }; + sdma: sdma@020ec000 { + compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma", + "fsl,imx35-sdma"; + reg = <0x020ec000 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_SDMA>, + <&clks IMX6UL_CLK_SDMA>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; + }; + pwm5: pwm@020f0000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x020f0000 0x4000>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_DUMMY>, - <&clks IMX6UL_CLK_DUMMY>; + clocks = <&clks IMX6UL_CLK_PWM5>, + <&clks IMX6UL_CLK_PWM5>; clock-names = "ipg", "per"; #pwm-cells = <2>; + status = "disabled"; }; pwm6: pwm@020f4000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x020f4000 0x4000>; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_DUMMY>, - <&clks IMX6UL_CLK_DUMMY>; + clocks = <&clks IMX6UL_CLK_PWM6>, + <&clks IMX6UL_CLK_PWM6>; clock-names = "ipg", "per"; #pwm-cells = <2>; + status = "disabled"; }; pwm7: pwm@020f8000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x020f8000 0x4000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_DUMMY>, - <&clks IMX6UL_CLK_DUMMY>; + clocks = <&clks IMX6UL_CLK_PWM7>, + <&clks IMX6UL_CLK_PWM7>; clock-names = "ipg", "per"; #pwm-cells = <2>; + status = "disabled"; }; pwm8: pwm@020fc000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x020fc000 0x4000>; interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_DUMMY>, - <&clks IMX6UL_CLK_DUMMY>; + clocks = <&clks IMX6UL_CLK_PWM8>, + <&clks IMX6UL_CLK_PWM8>; clock-names = "ipg", "per"; #pwm-cells = <2>; + status = "disabled"; }; }; @@ -590,17 +768,6 @@ status = "disabled"; }; - tsc: tsc@02040000 { - compatible = "fsl,imx6ul-tsc"; - reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_IPG>, - <&clks IMX6UL_CLK_ADC2>; - clock-names = "tsc", "adc"; - status = "disabled"; - }; - usdhc1: usdhc@02190000 { compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; reg = <0x02190000 0x4000>; @@ -672,6 +839,17 @@ reg = <0x021b0000 0x4000>; }; + lcdif: lcdif@021c8000 { + compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif"; + reg = <0x021c8000 0x4000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_LCDIF_PIX>, + <&clks IMX6UL_CLK_LCDIF_APB>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "pix", "axi", "disp_axi"; + status = "disabled"; + }; + qspi: qspi@021e0000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx7d-sbc-imx7.dts b/arch/arm/boot/dts/imx7d-sbc-imx7.dts index d63c597c0783..f8a868552707 100644 --- a/arch/arm/boot/dts/imx7d-sbc-imx7.dts +++ b/arch/arm/boot/dts/imx7d-sbc-imx7.dts @@ -22,7 +22,7 @@ pinctrl-0 = <&pinctrl_usdhc1>; cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; - enable-sdio-wakeup; + wakeup-source; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index b2c453662905..b267f79e3059 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -296,7 +296,7 @@ pinctrl-0 = <&pinctrl_usdhc1>; cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; - enable-sdio-wakeup; + wakeup-source; keep-power-in-suspend; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 25ad30978740..b5a50e0e7ff1 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -119,6 +119,15 @@ clock-output-names = "osc"; }; + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&intc>; + }; + etr@30086000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0x30086000 0x1000>; diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi index 3807d4f46ef7..b82f0e6d9a63 100644 --- a/arch/arm/boot/dts/integrator.dtsi +++ b/arch/arm/boot/dts/integrator.dtsi @@ -57,7 +57,7 @@ }; fpga { - compatible = "arm,amba-bus", "simple-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts new file mode 100644 index 000000000000..5bfd9e7845f2 --- /dev/null +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -0,0 +1,32 @@ +/* + * Device Tree Source for K2G EVM + * + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +/dts-v1/; + +#include "keystone-k2g.dtsi" + +/ { + compatible = "ti,k2g-evm", "ti,k2g", "ti,keystone"; + model = "Texas Instruments K2G General Purpose EVM"; + + memory { + device_type = "memory"; + reg = <0x00000008 0x00000000 0x00000000 0x80000000>; + }; + +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi new file mode 100644 index 000000000000..7ff2796ae925 --- /dev/null +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -0,0 +1,89 @@ +/* + * Device Tree Source for K2G SOC + * + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "skeleton.dtsi" + +/ { + compatible = "ti,k2g","ti,keystone"; + model = "Texas Instruments K2G SoC"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <0>; + }; + }; + + gic: interrupt-controller@02561000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x02561000 0x0 0x1000>, + <0x0 0x02562000 0x0 0x2000>, + <0x0 0x02564000 0x0 0x1000>, + <0x0 0x02566000 0x0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = + <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ti,keystone","simple-bus"; + ranges = <0x0 0x0 0x0 0xc0000000>; + dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>; + + uart0: serial@02530c00 { + compatible = "ns16550a"; + current-speed = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + reg = <0x02530c00 0x100>; + interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>; + clock-frequency = <200000000>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi b/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi new file mode 100644 index 000000000000..6548e68a20d0 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi @@ -0,0 +1,192 @@ +/* + * Device Tree common file for kirkwood-6282 based Buffalo Linkstation + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" +#include "kirkwood-linkstation.dtsi" + +/ { + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_power_hdd0: pmx-power-hdd0 { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + pmx_usb_vbus: pmx-usb-vbus { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; + pmx_led_alarm: pmx-led-alarm { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_led_function_red: pmx-led-function-red { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_led_info: pmx-led-info { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_function_blue: pmx-led-function-blue { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_led_power: pmx-led-power { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_button_function: pmx-button-function { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_power_switch: pmx-power-switch { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_power_auto_switch: pmx-power-auto-switch { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; + }; + + gpio_keys { + function-button { + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + }; + + power-on-switch { + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + + power-auto-switch { + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_leds { + red-alarm-led { + label = "linkstation:red:alarm"; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + }; + + red-function-led { + label = "linkstation:red:function"; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + }; + + amber-info-led { + label = "linkstation:amber:info"; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + }; + + blue-function-led { + label = "linkstation:blue:function"; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + }; + + blue-power-led { + label = "linkstation:blue:power"; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + }; + + gpio_fan { + compatible = "gpio-fan"; + pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; + pinctrl-names = "default"; + + gpios = <&gpio0 17 GPIO_ACTIVE_LOW + &gpio0 16 GPIO_ACTIVE_LOW>; + + gpio-fan,speed-map = <0 3 + 1500 2 + 3250 1 + 5000 0>; + + alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; + }; + + regulators { + usb_power: regulator@1 { + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + + hdd_power0: regulator@2 { + gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi b/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi new file mode 100644 index 000000000000..cf2e69f0d54f --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi @@ -0,0 +1,186 @@ +/* + * Device Tree common file for kirkwood-6281 based 2-Bay Buffalo Linkstation + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" +#include "kirkwood-linkstation.dtsi" + +/ { + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_power_hdd0: pmx-power-hdd0 { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + pmx_power_hdd1: pmx-power-hdd1 { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_usb_vbus: pmx-usb-vbus { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_led_alarm: pmx-led-alarm { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + pmx_led_function_red: pmx-led-function-red { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + pmx_led_function_blue: pmx-led-function-blue { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_led_info: pmx-led-info { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_power: pmx-led-power { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_button_function: pmx-button-function { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_power_switch: pmx-power-switch { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_power_auto_switch: pmx-power-auto-switch { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + }; + + sata@80000 { + nr-ports = <2>; + }; + }; + + gpio_keys { + function-button { + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + power-on-switch { + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + }; + + power-auto-switch { + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_leds { + red-alarm-led { + label = "linkstation:red:alarm"; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + }; + + red-function-led { + label = "linkstation:red:function"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + }; + + amber-info-led { + label = "linkstation:amber:info"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + }; + + blue-function-led { + label = "linkstation:blue:function"; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + }; + + blue-power-led { + label = "linkstation:blue:power"; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; + + regulators { + pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>; + + usb_power: regulator@1 { + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + }; + + hdd_power0: regulator@2 { + gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>; + }; + + hdd_power1: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "HDD1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy1: ethernet-phy@8 { + device_type = "ethernet-phy"; + reg = <8>; + }; +}; + +ð1 { + status = "okay"; + + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts new file mode 100644 index 000000000000..6dc0df2969f0 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts @@ -0,0 +1,135 @@ +/* + * Device Tree file for Buffalo Linkstation LS-QVL + * + * Copyright (C) 2016, Mario Lange <mario_lange@gmx.net> + * + * Based on kirkwood-linkstation-lswvl.dts, + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "kirkwood-linkstation-6282.dtsi" + +/ { + model = "Buffalo Linkstation LS-QVL"; + compatible = "buffalo,lsqvl", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { /* 256 MB */ + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_power_hdd1: pmx-power-hdd1 { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + pmx_led_hdderr0: pmx-led-hdderr0 { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + pmx_led_hdderr1: pmx-led-hdderr1 { + marvell,pins = "mpp35"; + marvell,function = "gpio"; + }; + pmx_led_hdderr2: pmx-led-hdderr2 { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + pmx_led_hdderr3: pmx-led-hdderr3 { + marvell,pins = "mpp25"; + marvell,function = "gpio"; + }; + }; + + sata@80000 { + nr-ports = <2>; + }; + }; + + gpio_leds { + pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm + &pmx_led_info &pmx_led_power + &pmx_led_function_blue + &pmx_led_hdderr0 + &pmx_led_hdderr1 + &pmx_led_hdderr2 + &pmx_led_hdderr3>; + + red-hdderr0-led { + label = "linkstation:red:hdderr0"; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; + + red-hdderr1-led { + label = "linkstation:red:hdderr1"; + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + }; + + red-hdderr2-led { + label = "linkstation:red:hdderr2"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; + + red-hdderr3-led { + label = "linkstation:red:hdderr3"; + gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; + }; + }; + + regulators { + pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>; + + hdd_power1: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "HDD1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts new file mode 100644 index 000000000000..edcba5c44b05 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts @@ -0,0 +1,57 @@ +/* + * Device Tree file for Buffalo Linkstation LS-VL + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "kirkwood-linkstation-6282.dtsi" + +/ { + model = "Buffalo Linkstation LS-VL"; + compatible = "buffalo,lsvl", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { /* 256 MB */ + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts new file mode 100644 index 000000000000..4b6450186af5 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts @@ -0,0 +1,57 @@ +/* + * Device Tree file for Buffalo Linkstation LS-WSXL + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "kirkwood-linkstation-duo-6281.dtsi" + +/ { + model = "Buffalo Linkstation LS-WSXL"; + compatible = "buffalo,lswsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts new file mode 100644 index 000000000000..954ec1d5b6dc --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts @@ -0,0 +1,112 @@ +/* + * Device Tree file for Buffalo Linkstation LS-WVL + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "kirkwood-linkstation-6282.dtsi" + +/ { + model = "Buffalo Linkstation LS-WVL"; + compatible = "buffalo,lswvl","marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { /* 256 MB */ + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_power_hdd1: pmx-power-hdd1 { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + pmx_led_hdderr0: pmx-led-hdderr0 { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + pmx_led_hdderr1: pmx-led-hdderr1 { + marvell,pins = "mpp35"; + marvell,function = "gpio"; + }; + }; + + sata@80000 { + nr-ports = <2>; + }; + }; + + gpio_leds { + pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm + &pmx_led_info &pmx_led_power + &pmx_led_function_blue + &pmx_led_hdderr0 + &pmx_led_hdderr1>; + + red-hdderr0-led { + label = "linkstation:red:hdderr0"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + }; + + red-hdderr1-led { + label = "linkstation:red:hdderr1"; + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + }; + }; + + regulators { + pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>; + + hdd_power1: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "HDD1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts new file mode 100644 index 000000000000..ecd5c12a805d --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts @@ -0,0 +1,116 @@ +/* + * Device Tree file for Buffalo Linkstation LS-WXL + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "kirkwood-linkstation-duo-6281.dtsi" + +/ { + model = "Buffalo Linkstation LS-WXL"; + compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_led_hdderr0: pmx-led-hdderr0 { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + pmx_led_hdderr1: pmx-led-hdderr1 { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + }; + }; + + gpio_leds { + pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm + &pmx_led_info &pmx_led_power + &pmx_led_function_blue + &pmx_led_hdderr0 + &pmx_led_hdderr1>; + + red-hdderr0-led { + label = "linkstation:red:hdderr0"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + + red-hdderr1-led { + label = "linkstation:red:hdderr1"; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio_fan { + compatible = "gpio-fan"; + pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; + pinctrl-names = "default"; + + gpios = <&gpio1 16 GPIO_ACTIVE_LOW + &gpio1 15 GPIO_ACTIVE_LOW>; + + gpio-fan,speed-map = <0 3 + 1500 2 + 3250 1 + 5000 0>; + + alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/kirkwood-linkstation.dtsi new file mode 100644 index 000000000000..69061b6e987b --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linkstation.dtsi @@ -0,0 +1,202 @@ +/* + * Device Tree common file for kirkwood based Buffalo Linkstation + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; + }; + + mbus { + pcie-controller { + status = "okay"; + pcie@1,0 { + status = "okay"; + }; + }; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_power_hdd0: pmx-power-hdd0 { + marvell,function = "gpio"; + }; + pmx_usb_vbus: pmx-usb-vbus { + marvell,function = "gpio"; + }; + pmx_led_alarm: pmx-led-alarm { + marvell,function = "gpio"; + }; + pmx_led_function_red: pmx-led-function-red { + marvell,function = "gpio"; + }; + pmx_led_function_blue: pmx-led-function-blue { + marvell,function = "gpio"; + }; + pmx_led_info: pmx-led-info { + marvell,function = "gpio"; + }; + pmx_led_power: pmx-led-power { + marvell,function = "gpio"; + }; + pmx_button_function: pmx-button-function { + marvell,function = "gpio"; + }; + pmx_power_switch: pmx-power-switch { + marvell,function = "gpio"; + }; + pmx_power_auto_switch: pmx-power-auto-switch { + marvell,function = "gpio"; + }; + }; + + serial@12000 { + status = "okay"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + + spi@10600 { + status = "okay"; + + m25p40@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p40", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x60000>; + label = "uboot"; + read-only; + }; + + partition@60000 { + reg = <0x60000 0x10000>; + label = "dtb"; + read-only; + }; + + partition@70000 { + reg = <0x70000 0x10000>; + label = "uboot_env"; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_button_function &pmx_power_switch + &pmx_power_auto_switch>; + pinctrl-names = "default"; + + function-button { + label = "Function Button"; + linux,code = <KEY_OPTION>; + }; + + power-on-switch { + label = "Power-on Switch"; + linux,code = <KEY_RESERVED>; + linux,input-type = <5>; + }; + + power-auto-switch { + label = "Power-auto Switch"; + linux,code = <KEY_ESC>; + linux,input-type = <5>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm + &pmx_led_info &pmx_led_power + &pmx_led_function_blue>; + pinctrl-names = "default"; + }; + + restart_poweroff { + compatible = "restart-poweroff"; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_power_hdd0 &pmx_usb_vbus>; + pinctrl-names = "default"; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + }; + + hdd_power0: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "HDD0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-lswvl.dts b/arch/arm/boot/dts/kirkwood-lswvl.dts deleted file mode 100644 index 36eec7392ab4..000000000000 --- a/arch/arm/boot/dts/kirkwood-lswvl.dts +++ /dev/null @@ -1,302 +0,0 @@ -/* - * Device Tree file for Buffalo Linkstation LS-WVL/VL - * - * Copyright (C) 2015, 2016 - * Roger Shimizu <rogershimizu@gmail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6282.dtsi" - -/ { - model = "Buffalo Linkstation LS-WVL/VL"; - compatible = "buffalo,lswvl", "buffalo,lsvl", "marvell,kirkwood-88f6282", "marvell,kirkwood"; - - memory { /* 256 MB */ - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; - }; - - mbus { - pcie-controller { - status = "okay"; - pcie@1,0 { - status = "okay"; - }; - }; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_power_hdd0: pmx-power-hdd0 { - marvell,pins = "mpp8"; - marvell,function = "gpio"; - }; - pmx_power_hdd1: pmx-power-hdd1 { - marvell,pins = "mpp9"; - marvell,function = "gpio"; - }; - pmx_usb_vbus: pmx-usb-vbus { - marvell,pins = "mpp12"; - marvell,function = "gpio"; - }; - pmx_fan_high: pmx-fan-high { - marvell,pins = "mpp16"; - marvell,function = "gpio"; - }; - pmx_fan_low: pmx-fan-low { - marvell,pins = "mpp17"; - marvell,function = "gpio"; - }; - pmx_led_hdderr0: pmx-led-hdderr0 { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; - pmx_led_hdderr1: pmx-led-hdderr1 { - marvell,pins = "mpp35"; - marvell,function = "gpio"; - }; - pmx_led_alarm: pmx-led-alarm { - marvell,pins = "mpp36"; - marvell,function = "gpio"; - }; - pmx_led_function_red: pmx-led-function-red { - marvell,pins = "mpp37"; - marvell,function = "gpio"; - }; - pmx_led_info: pmx-led-info { - marvell,pins = "mpp38"; - marvell,function = "gpio"; - }; - pmx_led_function_blue: pmx-led-function-blue { - marvell,pins = "mpp39"; - marvell,function = "gpio"; - }; - pmx_led_power: pmx-led-power { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - pmx_fan_lock: pmx-fan-lock { - marvell,pins = "mpp43"; - marvell,function = "gpio"; - }; - pmx_button_function: pmx-button-function { - marvell,pins = "mpp45"; - marvell,function = "gpio"; - }; - pmx_power_switch: pmx-power-switch { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - pmx_power_auto_switch: pmx-power-auto-switch { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - }; - - serial@12000 { - status = "okay"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; - }; - - spi@10600 { - status = "okay"; - - m25p40@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p40", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - mode = <0>; - - partition@0 { - reg = <0x0 0x60000>; - label = "uboot"; - read-only; - }; - - partition@60000 { - reg = <0x60000 0x10000>; - label = "dtb"; - read-only; - }; - - partition@70000 { - reg = <0x70000 0x10000>; - label = "uboot_env"; - }; - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_button_function &pmx_power_switch - &pmx_power_auto_switch>; - pinctrl-names = "default"; - - button@1 { - label = "Function Button"; - linux,code = <KEY_OPTION>; - gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; - }; - - button@2 { - label = "Power-on Switch"; - linux,code = <KEY_RESERVED>; - linux,input-type = <5>; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - }; - - button@3 { - label = "Power-auto Switch"; - linux,code = <KEY_ESC>; - linux,input-type = <5>; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm - &pmx_led_info &pmx_led_power - &pmx_led_function_blue - &pmx_led_hdderr0 - &pmx_led_hdderr1>; - pinctrl-names = "default"; - - led@1 { - label = "lswvl:red:alarm"; - gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; - }; - - led@2 { - label = "lswvl:red:func"; - gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; - }; - - led@3 { - label = "lswvl:amber:info"; - gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; - }; - - led@4 { - label = "lswvl:blue:func"; - gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; - }; - - led@5 { - label = "lswvl:blue:power"; - gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - led@6 { - label = "lswvl:red:hdderr0"; - gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; - }; - - led@7 { - label = "lswvl:red:hdderr1"; - gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio_fan { - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; - pinctrl-names = "default"; - - gpios = <&gpio0 17 GPIO_ACTIVE_LOW - &gpio0 16 GPIO_ACTIVE_LOW>; - - gpio-fan,speed-map = <0 3 - 1500 2 - 3250 1 - 5000 0>; - - alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; - }; - - restart_poweroff { - compatible = "restart-poweroff"; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>; - pinctrl-names = "default"; - - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; - }; - hdd_power0: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "HDD0 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>; - }; - hdd_power1: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "HDD1 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - device_type = "ethernet-phy"; - reg = <0>; - }; -}; - -ð0 { - status = "okay"; - - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/arch/arm/boot/dts/kirkwood-lswxl.dts b/arch/arm/boot/dts/kirkwood-lswxl.dts deleted file mode 100644 index b13ec20a7088..000000000000 --- a/arch/arm/boot/dts/kirkwood-lswxl.dts +++ /dev/null @@ -1,302 +0,0 @@ -/* - * Device Tree file for Buffalo Linkstation LS-WXL/WSXL - * - * Copyright (C) 2015, 2016 - * Roger Shimizu <rogershimizu@gmail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "Buffalo Linkstation LS-WXL/WSXL"; - compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { /* 128 MB */ - device_type = "memory"; - reg = <0x00000000 0x8000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; - }; - - mbus { - pcie-controller { - status = "okay"; - pcie@1,0 { - status = "okay"; - }; - }; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_power_hdd0: pmx-power-hdd0 { - marvell,pins = "mpp28"; - marvell,function = "gpio"; - }; - pmx_power_hdd1: pmx-power-hdd1 { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - pmx_usb_vbus: pmx-usb-vbus { - marvell,pins = "mpp37"; - marvell,function = "gpio"; - }; - pmx_fan_high: pmx-fan-high { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - pmx_fan_low: pmx-fan-low { - marvell,pins = "mpp48"; - marvell,function = "gpio"; - }; - pmx_led_hdderr0: pmx-led-hdderr0 { - marvell,pins = "mpp8"; - marvell,function = "gpio"; - }; - pmx_led_hdderr1: pmx-led-hdderr1 { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - pmx_led_alarm: pmx-led-alarm { - marvell,pins = "mpp49"; - marvell,function = "gpio"; - }; - pmx_led_function_red: pmx-led-function-red { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; - pmx_led_function_blue: pmx-led-function-blue { - marvell,pins = "mpp36"; - marvell,function = "gpio"; - }; - pmx_led_info: pmx-led-info { - marvell,pins = "mpp38"; - marvell,function = "gpio"; - }; - pmx_led_power: pmx-led-power { - marvell,pins = "mpp39"; - marvell,function = "gpio"; - }; - pmx_fan_lock: pmx-fan-lock { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - pmx_button_function: pmx-button-function { - marvell,pins = "mpp41"; - marvell,function = "gpio"; - }; - pmx_power_switch: pmx-power-switch { - marvell,pins = "mpp42"; - marvell,function = "gpio"; - }; - pmx_power_auto_switch: pmx-power-auto-switch { - marvell,pins = "mpp43"; - marvell,function = "gpio"; - }; - }; - - serial@12000 { - status = "okay"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; - }; - - spi@10600 { - status = "okay"; - - m25p40@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p40", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - mode = <0>; - - partition@0 { - reg = <0x0 0x60000>; - label = "uboot"; - read-only; - }; - - partition@60000 { - reg = <0x60000 0x10000>; - label = "dtb"; - read-only; - }; - - partition@70000 { - reg = <0x70000 0x10000>; - label = "uboot_env"; - }; - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_button_function &pmx_power_switch - &pmx_power_auto_switch>; - pinctrl-names = "default"; - - button@1 { - label = "Function Button"; - linux,code = <KEY_OPTION>; - gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; - }; - - button@2 { - label = "Power-on Switch"; - linux,code = <KEY_RESERVED>; - linux,input-type = <5>; - gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; - }; - - button@3 { - label = "Power-auto Switch"; - linux,code = <KEY_ESC>; - linux,input-type = <5>; - gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm - &pmx_led_info &pmx_led_power - &pmx_led_function_blue - &pmx_led_hdderr0 - &pmx_led_hdderr1>; - pinctrl-names = "default"; - - led@1 { - label = "lswxl:blue:func"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - }; - - led@2 { - label = "lswxl:red:alarm"; - gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - }; - - led@3 { - label = "lswxl:amber:info"; - gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; - }; - - led@4 { - label = "lswxl:blue:power"; - gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - led@5 { - label = "lswxl:red:func"; - gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; - }; - - led@6 { - label = "lswxl:red:hdderr0"; - gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; - }; - - led@7 { - label = "lswxl:red:hdderr1"; - gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio_fan { - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; - pinctrl-names = "default"; - - gpios = <&gpio1 16 GPIO_ACTIVE_LOW - &gpio1 15 GPIO_ACTIVE_LOW>; - - gpio-fan,speed-map = <0 3 - 1500 2 - 3250 1 - 5000 0>; - - alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; - }; - - restart_poweroff { - compatible = "restart-poweroff"; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>; - pinctrl-names = "default"; - - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; - }; - hdd_power0: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "HDD0 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>; - }; - hdd_power1: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "HDD1 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&mdio { - status = "okay"; - - ethphy1: ethernet-phy@8 { - device_type = "ethernet-phy"; - reg = <8>; - }; -}; - -ð1 { - status = "okay"; - - ethernet1-port@0 { - phy-handle = <ðphy1>; - }; -}; diff --git a/arch/arm/boot/dts/kirkwood-openrd-client.dts b/arch/arm/boot/dts/kirkwood-openrd-client.dts index 887b9c1fee43..96ff59d68f44 100644 --- a/arch/arm/boot/dts/kirkwood-openrd-client.dts +++ b/arch/arm/boot/dts/kirkwood-openrd-client.dts @@ -20,6 +20,9 @@ compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood"; ocp@f1000000 { + audio-controller@a0000 { + status = "okay"; + }; i2c@11000 { status = "okay"; clock-frequency = <400000>; @@ -27,6 +30,7 @@ cs42l51: cs42l51@4a { compatible = "cirrus,cs42l51"; reg = <0x4a>; + #sound-dai-cells = <0>; }; }; }; @@ -37,7 +41,7 @@ simple-audio-card,mclk-fs = <256>; simple-audio-card,cpu { - sound-dai = <&audio0>; + sound-dai = <&audio0 0>; }; simple-audio-card,codec { diff --git a/arch/arm/boot/dts/kirkwood-openrd.dtsi b/arch/arm/boot/dts/kirkwood-openrd.dtsi index d3330dadf7ed..24f1d30970a0 100644 --- a/arch/arm/boot/dts/kirkwood-openrd.dtsi +++ b/arch/arm/boot/dts/kirkwood-openrd.dtsi @@ -40,7 +40,7 @@ pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>; pinctrl-names = "default"; - pmx_select28: pmx-select-uart-sd { + pmx_select28: pmx-select-rs232-rs485 { marvell,pins = "mpp28"; marvell,function = "gpio"; }; @@ -48,7 +48,7 @@ marvell,pins = "mpp29"; marvell,function = "gpio"; }; - pmx_select34: pmx-select-rs232-rs484 { + pmx_select34: pmx-select-uart-sd { marvell,pins = "mpp34"; marvell,function = "gpio"; }; @@ -65,6 +65,43 @@ status = "okay"; cd-gpios = <&gpio0 29 9>; }; + gpio@10100 { + p28 { + gpio-hog; + gpios = <28 GPIO_ACTIVE_HIGH>; + /* + * SelRS232or485 selects between RS-232 or RS-485 + * mode for the second UART. + * + * Low: RS-232 + * High: RS-485 + * + * To use the second UART, you need to change also + * the SelUARTorSD. + */ + output-low; + line-name = "SelRS232or485"; + }; + }; + gpio@10140 { + p2 { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + /* + * SelUARTorSD selects between the second UART + * (serial@12100) and SD (mvsdio@90000). + * + * Low: UART + * High: SD + * + * When changing this line make sure the newly + * selected device node is enabled and the + * previously selected device node is disabled. + */ + output-high; /* Select SD by default */ + line-name = "SelUARTorSD"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 7b5a4a18f49c..7445a15e259d 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -381,7 +381,7 @@ audio0: audio-controller@a0000 { compatible = "marvell,kirkwood-audio"; - #sound-dai-cells = <0>; + #sound-dai-cells = <1>; reg = <0xa0000 0x2210>; interrupts = <24>; clocks = <&gate_clk 9>; diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts new file mode 100644 index 000000000000..da8598402ab8 --- /dev/null +++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts @@ -0,0 +1,268 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "omap36xx.dtsi" +#include "logicpd-som-lv.dtsi" +#include "omap-gpmc-smsc9221.dtsi" + +/ { + model = "LogicPD Zoom DM3730 SOM-LV Development Kit"; + compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3"; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_pins>; + + sysboot2 { + label = "gpio3"; + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* gpio_111 / uP_GPIO_3 */ + linux,code = <BTN_0>; + wakeup-source; + }; + }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3logic"; + ti,mcbsp = <&mcbsp2>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins &led_pins_wkup>; + + led1 { + label = "led1"; + gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; /* gpio133 */ + linux,default-trigger = "cpu0"; + }; + + led2 { + label = "led2"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* gpio11 */ + linux,default-trigger = "none"; + }; + }; +}; + +&vaux1 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; +}; + +&vaux4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + +&mcbsp2 { + status = "okay"; +}; + +&charger { + ti,bb-uvolt = <3200000>; + ti,bb-uamp = <150>; +}; + +&gpmc { + ranges = <1 0 0x08000000 0x1000000>; /* CS1: 16MB for LAN9221 */ + + ethernet@gpmc { + pinctrl-names = "default"; + pinctrl-0 = <&lan9221_pins>; + interrupt-parent = <&gpio5>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; /* gpio_152 */ + reg = <1 0 0xff>; + }; +}; + +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + vdds_dsi-supply = <&vpll2>; + vdda_video-supply = <&video_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins1>; + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <16>; + }; + }; +}; + +/ { + aliases { + display0 = &lcd0; + }; + + video_reg: video_reg { + compatible = "regulator-fixed"; + regulator-name = "fixed-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + lcd0: display@0 { + compatible = "panel-dpi"; + label = "28"; + status = "okay"; + /* default-on; */ + pinctrl-names = "default"; + pinctrl-0 = <&lcd_enable_pin>; + enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */ + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + panel-timing { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <3>; + hback-porch = <2>; + hsync-len = <42>; + vback-porch = <3>; + vfront-porch = <2>; + vsync-len = <11>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + + bl: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + pwms = <&twl_pwm 0 5000000>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <7>; + enable-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* gpio_8 */ + }; +}; + +&mmc1 { + interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins &mmc1_cd>; + wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */ + cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>; /* gpio_110 */ + vmmc-supply = <&vmmc1>; + bus-width = <4>; + cap-power-off-card; +}; + +&omap3_pmx_core { + gpio_key_pins: pinmux_gpio_key_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_xclkb.gpio_111 / uP_GPIO_3*/ + >; + }; + + led_pins: pinmux_led_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x215e, PIN_OUTPUT_PULLUP | MUX_MODE4) /* sdmmc2_dat1.gpio_133 / uP_GPIO_0 */ + >; + }; + + lan9221_pins: pinmux_lan9221_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_strobe.gpio_126 sdmmc1_wp*/ + >; + }; + + lcd_enable_pin: pinmux_lcd_enable_pin { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */ + >; + }; + + dss_dpi_pins1: pinmux_dss_dpi_pins1 { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_acbias.dss_acbias */ + + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data15.dss_data15 */ + >; + }; +}; + +&omap3_pmx_wkup { + led_pins_wkup: pinmux_led_pins_wkup { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu0.gpio_11 / uP_GPIO_1 */ + >; + }; + + backlight_pins: pinmux_backlight_pins { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* sys_boot6.gpio_8 */ + >; + }; + + mmc1_cd: pinmux_mmc1_cd { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d11.gpio_110 */ + >; + }; +}; + + +&uart1 { + interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; +}; + +/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */ +&usb_otg_hs { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb_otg_pins>; + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi new file mode 100644 index 000000000000..365f39ff58bb --- /dev/null +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -0,0 +1,265 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/input/input.h> + +/ { + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + wl12xx_vmmc: wl12xx_vmmc { + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio1 3 0>; /* gpio_3 */ + startup-delay-us = <70000>; + enable-active-high; + vin-supply = <&vmmc2>; + }; + + /* HS USB Host PHY on PORT 1 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */ + }; +}; + +&gpmc { + ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */ + + nand@0,0 { + linux,mtd-name = "micron,mt29f4g16abbda3w"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + nand-bus-width = <16>; + ti,nand-ecc-opt = "bch8"; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + gpmc,device-width = <2>; + + gpmc,page-burst-access-ns = <5>; + gpmc,cycle2cycle-delay-ns = <50>; + + #address-cells = <1>; + #size-cells = <1>; + + /* u-boot uses mtdparts=omap2-nand.0:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs) */ + + x-loader@0 { + label = "x-loader"; + reg = <0 0x80000>; + }; + + bootloaders@80000 { + label = "u-boot"; + reg = <0x80000 0x1e0000>; + }; + + bootloaders_env@260000 { + label = "u-boot-env"; + reg = <0x260000 0x20000>; + }; + + kernel@280000 { + label = "kernel"; + reg = <0x280000 0x400000>; + }; + + filesystem@680000 { + label = "fs"; + reg = <0x680000 0>; /* 0 = MTDPART_SIZ_FULL */ + }; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; +}; + +&mmc3 { + interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>; + pinctrl-0 = <&mmc3_pins>; + pinctrl-names = "default"; + vmmc-supply = <&wl12xx_vmmc>; + non-removable; + bus-width = <4>; + cap-power-off-card; + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1273"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */ + ref-clock-frequency = <26000000>; + }; +}; + +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; + + +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_pins>; + + mmc3_pins: pinmux_mm3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat4.sdmmc3_dat0 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */ + OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */ + OMAP3_CORE1_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ + OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */ + OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs2.sdmmc_clk */ + >; + }; + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */ + OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx */ + OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr */ + OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx */ + >; + }; + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */ + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/ + OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ + OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* GPIO_162,BT_EN */ + >; + }; + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ + OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ + OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ + OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ + >; + }; + + hsusb2_pins: pinmux_hsusb2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ + OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ + OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ + >; + }; + + hsusb_otg_pins: pinmux_hsusb_otg_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ + OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ + OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */ + OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */ + OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */ + OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */ + OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */ + OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */ + OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */ + OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */ + OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */ + OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */ + >; + }; + + +}; + +&omap3_pmx_wkup { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_reset_pin>; + hsusb2_reset_pin: pinmux_hsusb1_reset_pin { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */ + >; + }; +}; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_2_pins>; + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; +}; + +&uart2 { + interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&twl { + twl_power: power { + compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle"; + ti,use_poweroff; + }; +}; + +&twl_gpio { + ti,use-leds; +}; diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts index fb13f18c08cc..015f795a8d19 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -11,7 +11,7 @@ #include "omap-gpmc-smsc9221.dtsi" / { - model = "LogicPD Zoom DM3730 Torpedo Development Kit"; + model = "LogicPD Zoom DM3730 Torpedo + Wireless Development Kit"; compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3"; gpio_keys { @@ -71,6 +71,15 @@ linux,default-trigger = "none"; }; }; + + pwm10: dmtimer-pwm@10 { + compatible = "ti,omap-dmtimer-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + ti,timers = <&timer10>; + #pwm-cells = <3>; + }; + }; &vaux1 { @@ -93,7 +102,8 @@ }; &gpmc { - ranges = <1 0 0x08000000 0x1000000>; /* CS1: 16MB for LAN9221 */ + ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */ + 1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */ ethernet@gpmc { pinctrl-names = "default"; @@ -111,6 +121,7 @@ &dss { status = "ok"; vdds_dsi-supply = <&vpll2>; + vdda_video-supply = <&video_reg>; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins1>; port { @@ -126,13 +137,22 @@ display0 = &lcd0; }; + video_reg: video_reg { + pinctrl-names = "default"; + pinctrl-0 = <&panel_pwr_pins>; + compatible = "regulator-fixed"; + regulator-name = "fixed-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */ + }; + lcd0: display@0 { compatible = "panel-dpi"; label = "15"; status = "okay"; /* default-on; */ pinctrl-names = "default"; - enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */ port { lcd_in: endpoint { @@ -158,13 +178,13 @@ }; bl: backlight { - compatible = "gpio-backlight"; + compatible = "pwm-backlight"; pinctrl-names = "default"; pinctrl-0 = <&backlight_pins>; - - gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>, /* gpio_56 */ - <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */ - default-on; + pwms = <&pwm10 0 5000000 0>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <7>; + enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */ }; }; @@ -186,6 +206,12 @@ >; }; + pwm_pins: pinmux_pwm_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* gpmc_ncs5.gpt_10_pwm_evt */ + >; + }; + led_pins: pinmux_led_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4) /* gpio_179 */ @@ -212,37 +238,60 @@ backlight_pins: pinmux_backlight_pins { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs5.gpio_56 */ - OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4) /* mcbsp4_dx.gpio_154 */ + OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_dx.gpio_154 */ + >; + }; + + isp_pins: pinmux_isp_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0) /* cam_hs.cam_hs */ + OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0) /* cam_vs.cam_vs */ + OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0) /* cam_xclka.cam_xclka */ + OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0) /* cam_pclk.cam_pclk */ + + OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */ + OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */ + OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */ + OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0) /* cam_d3.cam_d3 */ + OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0) /* cam_d4.cam_d4 */ + OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0) /* cam_d5.cam_d5 */ + OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6.cam_d6 */ + OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7.cam_d7 */ + >; + }; + + panel_pwr_pins: pinmux_panel_pwr_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */ >; }; dss_dpi_pins1: pinmux_dss_dpi_pins1 { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ - OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ - OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ - OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ - - OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ - OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ - OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ - OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ - OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ - OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ - OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ - OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ - OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ - OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ - OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ - OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ - - OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3) /* dss_data18.dss_data0 */ - OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3) /* dss_data19.dss_data1 */ - OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3) /* dss_data20.dss_data2 */ - OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3) /* dss_data21.dss_data3 */ - OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3) /* dss_data22.dss_data4 */ - OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3) /* dss_data23.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_acbias.dss_acbias */ + + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data17.dss_data17 */ + + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data18.dss_data0 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data19.dss_data1 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data20.dss_data2 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data21.dss_data3 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data22.dss_data4 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data23.dss_data5 */ >; }; }; @@ -268,6 +317,24 @@ }; }; +&i2c2 { + mt9p031@48 { + compatible = "aptina,mt9p031"; + reg = <0x48>; + clocks = <&isp 0>; + vaa-supply = <&vaux4>; + vdd-supply = <&vaux4>; + vdd_io-supply = <&vaux4>; + port { + mt9p031_out: endpoint { + input-clock-frequency = <24000000>; + pixel-clock-frequency = <72000000>; + remote-endpoint = <&ccdc_ep>; + }; + }; + }; +}; + &i2c3 { touchscreen: tsc2004@48 { compatible = "ti,tsc2004"; @@ -289,12 +356,45 @@ }; }; +&mcspi1 { + at25@0 { + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpha; + spi-cpol; + + pagesize = <64>; + size = <32768>; + address-width = <16>; + }; +}; + +&isp { + pinctrl-names = "default"; + pinctrl-0 = <&isp_pins>; + ports { + port@0 { + reg = <0>; + ccdc_ep: endpoint { + remote-endpoint = <&mt9p031_out>; + bus-width = <8>; + hsync-active = <1>; + vsync-active = <1>; + pclk-sample = <0>; + }; + }; + }; +}; + &uart1 { interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; }; /* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */ &usb_otg_hs { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb_otg_pins>; interface-type = <0>; usb-phy = <&usb2_phy>; phys = <&usb2_phy>; diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 00805322367e..5e9a13c0eaf7 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -35,11 +35,15 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */ + ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { - linux,mtd-name = "micron,mt29f4g16abbda3w"; + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + linux,mtd-name = "micron,mt29f4g16abbda3w"; nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; gpmc,sync-clk-ps = <0>; @@ -110,6 +114,11 @@ &i2c3 { clock-frequency = <400000>; + at24@50 { + compatible = "at24,24c02"; + readonly; + reg = <0x50>; + }; }; /* @@ -167,6 +176,31 @@ OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* GPIO_162,BT_EN */ >; }; + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ + OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ + OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ + OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ + >; + }; + hsusb_otg_pins: pinmux_hsusb_otg_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ + OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ + OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */ + OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */ + + OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */ + OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */ + OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */ + OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */ + OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */ + OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */ + OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */ + OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */ + >; + }; }; &uart2 { @@ -175,6 +209,11 @@ pinctrl-0 = <&uart2_pins>; }; +&mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; +}; + &omap3_pmx_core2 { mmc3_core2_pins: pinmux_mmc3_core2_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index c85cf979725e..c58d8da9ea2a 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -13,6 +13,9 @@ #include "skeleton.dtsi" +#include <dt-bindings/clock/lpc32xx-clock.h> +#include <dt-bindings/interrupt-controller/irq.h> + / { compatible = "nxp,lpc3220"; interrupt-parent = <&mic>; @@ -28,6 +31,22 @@ }; }; + clocks { + xtal_32k: xtal_32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xtal_32k"; + }; + + xtal: xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <13000000>; + clock-output-names = "xtal"; + }; + }; + ahb { #address-cells = <1>; #size-cells = <1>; @@ -41,20 +60,24 @@ slc: flash@20020000 { compatible = "nxp,lpc3220-slc"; reg = <0x20020000 0x1000>; + clocks = <&clk LPC32XX_CLK_SLC>; status = "disabled"; }; mlc: flash@200a8000 { compatible = "nxp,lpc3220-mlc"; reg = <0x200a8000 0x11000>; - interrupts = <11 0>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_MLC>; status = "disabled"; }; dma: dma@31000000 { compatible = "arm,pl080", "arm,primecell"; reg = <0x31000000 0x1000>; - interrupts = <0x1c 0>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_DMA>; + clock-names = "apb_pclk"; }; usb { @@ -69,43 +92,60 @@ ohci: ohci@0 { compatible = "nxp,ohci-nxp", "usb-ohci"; reg = <0x0 0x300>; - interrupts = <0x3b 0>; + interrupts = <59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usbclk LPC32XX_USB_CLK_HOST>; status = "disabled"; }; usbd: usbd@0 { compatible = "nxp,lpc3220-udc"; reg = <0x0 0x300>; - interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; + interrupts = <61 IRQ_TYPE_LEVEL_HIGH>, + <62 IRQ_TYPE_LEVEL_HIGH>, + <60 IRQ_TYPE_LEVEL_HIGH>, + <58 IRQ_TYPE_LEVEL_LOW>; + clocks = <&usbclk LPC32XX_USB_CLK_DEVICE>; status = "disabled"; }; i2cusb: i2c@300 { compatible = "nxp,pnx-i2c"; reg = <0x300 0x100>; - interrupts = <0x3f 0>; + interrupts = <63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usbclk LPC32XX_USB_CLK_I2C>; #address-cells = <1>; #size-cells = <0>; pnx,timeout = <0x64>; }; + + usbclk: clock-controller@f00 { + compatible = "nxp,lpc3220-usb-clk"; + reg = <0xf00 0x100>; + #clock-cells = <1>; + }; }; clcd: clcd@31040000 { compatible = "arm,pl110", "arm,primecell"; reg = <0x31040000 0x1000>; - interrupts = <0x0e 0>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_LCD>; + clock-names = "apb_pclk"; status = "disabled"; }; mac: ethernet@31060000 { compatible = "nxp,lpc-eth"; reg = <0x31060000 0x1000>; - interrupts = <0x1d 0>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_MAC>; }; emc: memory-controller@31080000 { compatible = "arm,pl175", "arm,primecell"; reg = <0x31080000 0x1000>; + clocks = <&clk LPC32XX_CLK_DDRAM>, <&clk LPC32XX_CLK_DDRAM>; + clock-names = "mpmcclk", "apb_pclk"; #address-cells = <1>; #size-cells = <1>; @@ -125,7 +165,9 @@ ssp0: ssp@20084000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x20084000 0x1000>; - interrupts = <0x14 0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_SSP0>; + clock-names = "apb_pclk"; }; spi1: spi@20088000 { @@ -136,7 +178,9 @@ ssp1: ssp@2008c000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x2008c000 0x1000>; - interrupts = <0x15 0>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_SSP1>; + clock-names = "apb_pclk"; }; spi2: spi@20090000 { @@ -152,7 +196,10 @@ sd: sd@20098000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x20098000 0x1000>; - interrupts = <0x0f 0>, <0x0d 0>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH>, + <13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_SD>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -166,55 +213,57 @@ /* actually, ns16550a w/ 64 byte fifos! */ compatible = "nxp,lpc3220-uart"; reg = <0x40090000 0x1000>; - interrupts = <9 0>; - clock-frequency = <13000000>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; + clocks = <&clk LPC32XX_CLK_UART5>; status = "disabled"; }; uart3: serial@40080000 { compatible = "nxp,lpc3220-uart"; reg = <0x40080000 0x1000>; - interrupts = <7 0>; - clock-frequency = <13000000>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; + clocks = <&clk LPC32XX_CLK_UART3>; status = "disabled"; }; uart4: serial@40088000 { compatible = "nxp,lpc3220-uart"; reg = <0x40088000 0x1000>; - interrupts = <8 0>; - clock-frequency = <13000000>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; + clocks = <&clk LPC32XX_CLK_UART4>; status = "disabled"; }; uart6: serial@40098000 { compatible = "nxp,lpc3220-uart"; reg = <0x40098000 0x1000>; - interrupts = <10 0>; - clock-frequency = <13000000>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; + clocks = <&clk LPC32XX_CLK_UART6>; status = "disabled"; }; i2c1: i2c@400A0000 { compatible = "nxp,pnx-i2c"; reg = <0x400A0000 0x100>; - interrupts = <0x33 0>; + interrupts = <51 IRQ_TYPE_LEVEL_LOW>; #address-cells = <1>; #size-cells = <0>; pnx,timeout = <0x64>; + clocks = <&clk LPC32XX_CLK_I2C1>; }; i2c2: i2c@400A8000 { compatible = "nxp,pnx-i2c"; reg = <0x400A8000 0x100>; - interrupts = <0x32 0>; + interrupts = <50 IRQ_TYPE_LEVEL_LOW>; #address-cells = <1>; #size-cells = <0>; pnx,timeout = <0x64>; + clocks = <&clk LPC32XX_CLK_I2C2>; }; mpwm: mpwm@400E8000 { @@ -231,6 +280,23 @@ compatible = "simple-bus"; ranges = <0x20000000 0x20000000 0x30000000>; + /* System Control Block */ + scb { + compatible = "simple-bus"; + ranges = <0x0 0x040004000 0x00001000>; + #address-cells = <1>; + #size-cells = <1>; + + clk: clock-controller@0 { + compatible = "nxp,lpc3220-clk"; + reg = <0x00 0x114>; + #clock-cells = <1>; + + clocks = <&xtal_32k>, <&xtal>; + clock-names = "xtal_32k", "xtal"; + }; + }; + /* * MIC Interrupt controller includes: * MIC @40008000 @@ -247,28 +313,29 @@ uart1: serial@40014000 { compatible = "nxp,lpc3220-hsuart"; reg = <0x40014000 0x1000>; - interrupts = <26 0>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; uart2: serial@40018000 { compatible = "nxp,lpc3220-hsuart"; reg = <0x40018000 0x1000>; - interrupts = <25 0>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; uart7: serial@4001c000 { compatible = "nxp,lpc3220-hsuart"; reg = <0x4001c000 0x1000>; - interrupts = <24 0>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; rtc: rtc@40024000 { compatible = "nxp,lpc3220-rtc"; reg = <0x40024000 0x1000>; - interrupts = <0x34 0>; + interrupts = <52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_RTC>; }; gpio: gpio@40028000 { @@ -281,26 +348,33 @@ timer4: timer@4002C000 { compatible = "nxp,lpc3220-timer"; reg = <0x4002C000 0x1000>; - interrupts = <0x3 0>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER4>; + clock-names = "timerclk"; status = "disabled"; }; timer5: timer@40030000 { compatible = "nxp,lpc3220-timer"; reg = <0x40030000 0x1000>; - interrupts = <0x4 0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER5>; + clock-names = "timerclk"; status = "disabled"; }; watchdog: watchdog@4003C000 { compatible = "nxp,pnx4008-wdt"; reg = <0x4003C000 0x1000>; + clocks = <&clk LPC32XX_CLK_WDOG>; }; timer0: timer@40044000 { compatible = "nxp,lpc3220-timer"; reg = <0x40044000 0x1000>; - interrupts = <0x10 0>; + clocks = <&clk LPC32XX_CLK_TIMER0>; + clock-names = "timerclk"; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; }; /* @@ -313,53 +387,63 @@ adc: adc@40048000 { compatible = "nxp,lpc3220-adc"; reg = <0x40048000 0x1000>; - interrupts = <0x27 0>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_ADC>; status = "disabled"; }; tsc: tsc@40048000 { compatible = "nxp,lpc3220-tsc"; reg = <0x40048000 0x1000>; - interrupts = <0x27 0>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_ADC>; status = "disabled"; }; timer1: timer@4004C000 { compatible = "nxp,lpc3220-timer"; reg = <0x4004C000 0x1000>; - interrupts = <0x11 0>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER1>; + clock-names = "timerclk"; }; key: key@40050000 { compatible = "nxp,lpc3220-key"; reg = <0x40050000 0x1000>; - interrupts = <54 0>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; timer2: timer@40058000 { compatible = "nxp,lpc3220-timer"; reg = <0x40058000 0x1000>; - interrupts = <0x12 0>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER2>; + clock-names = "timerclk"; status = "disabled"; }; pwm1: pwm@4005C000 { compatible = "nxp,lpc3220-pwm"; reg = <0x4005C000 0x4>; + clocks = <&clk LPC32XX_CLK_PWM1>; status = "disabled"; }; pwm2: pwm@4005C004 { compatible = "nxp,lpc3220-pwm"; reg = <0x4005C004 0x4>; + clocks = <&clk LPC32XX_CLK_PWM2>; status = "disabled"; }; timer3: timer@40060000 { compatible = "nxp,lpc3220-timer"; reg = <0x40060000 0x1000>; - interrupts = <0x13 0>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER3>; + clock-names = "timerclk"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 2c84ca236473..726372d3adc0 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -457,6 +457,18 @@ reg = <0x0 0x2d24000 0x0 0x4000>; }; + ptp_clock@2d10e00 { + compatible = "fsl,etsec-ptp"; + reg = <0x0 0x2d10e00 0x0 0xb0>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + fsl,tclk-period = <5>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0xaaaaaaab>; + fsl,tmr-fiper1 = <999999990>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <499999999>; + }; + enet0: ethernet@2d10000 { compatible = "fsl,etsec2"; device_type = "network"; @@ -560,5 +572,49 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; }; + + pcie@3400000 { + compatible = "fsl,ls1021a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */ + 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + fsl,pcie-scfg = <&scfg 0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + }; + + pcie@3500000 { + compatible = "fsl,ls1021a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03500000 0x0 0x00010000 /* controller registers */ + 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + fsl,pcie-scfg = <&scfg 1>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; diff --git a/arch/arm/boot/dts/mt2701-pinfunc.h b/arch/arm/boot/dts/mt2701-pinfunc.h new file mode 100644 index 000000000000..e24ebc8d928e --- /dev/null +++ b/arch/arm/boot/dts/mt2701-pinfunc.h @@ -0,0 +1,735 @@ +/* + * Copyright (c) 2015 MediaTek Inc. + * Author: Biao Huang <biao.huang@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __DTS_MT2701_PINFUNC_H +#define __DTS_MT2701_PINFUNC_H + +#include <dt-bindings/pinctrl/mt65xx.h> + +#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_GPIO0 (MTK_PIN_NO(0) | 0) +#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDO (MTK_PIN_NO(0) | 1) +#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDI (MTK_PIN_NO(0) | 2) + +#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_GPIO1 (MTK_PIN_NO(1) | 0) +#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDI (MTK_PIN_NO(1) | 1) +#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDO (MTK_PIN_NO(1) | 2) + +#define MT2701_PIN_2_PWRAP_INT__FUNC_GPIO2 (MTK_PIN_NO(2) | 0) +#define MT2701_PIN_2_PWRAP_INT__FUNC_PWRAP_INT (MTK_PIN_NO(2) | 1) + +#define MT2701_PIN_3_PWRAP_SPI0_CK__FUNC_GPIO3 (MTK_PIN_NO(3) | 0) +#define MT2701_PIN_3_PWRAP_SPI0_CK__FUNC_PWRAP_SPICK_I (MTK_PIN_NO(3) | 1) + +#define MT2701_PIN_4_PWRAP_SPI0_CSN__FUNC_GPIO4 (MTK_PIN_NO(4) | 0) +#define MT2701_PIN_4_PWRAP_SPI0_CSN__FUNC_PWRAP_SPICS_B_I (MTK_PIN_NO(4) | 1) + +#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_GPIO5 (MTK_PIN_NO(5) | 0) +#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_PWRAP_SPICK2_I (MTK_PIN_NO(5) | 1) +#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_ANT_SEL1 (MTK_PIN_NO(5) | 5) + +#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_GPIO6 (MTK_PIN_NO(6) | 0) +#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_PWRAP_SPICS2_B_I (MTK_PIN_NO(6) | 1) +#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_ANT_SEL0 (MTK_PIN_NO(6) | 5) +#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_DBG_MON_A_0 (MTK_PIN_NO(6) | 7) + +#define MT2701_PIN_7_SPI1_CSN__FUNC_GPIO7 (MTK_PIN_NO(7) | 0) +#define MT2701_PIN_7_SPI1_CSN__FUNC_SPI1_CS (MTK_PIN_NO(7) | 1) +#define MT2701_PIN_7_SPI1_CSN__FUNC_KCOL0 (MTK_PIN_NO(7) | 4) +#define MT2701_PIN_7_SPI1_CSN__FUNC_DBG_MON_B_12 (MTK_PIN_NO(7) | 7) + +#define MT2701_PIN_8_SPI1_MI__FUNC_GPIO8 (MTK_PIN_NO(8) | 0) +#define MT2701_PIN_8_SPI1_MI__FUNC_SPI1_MI (MTK_PIN_NO(8) | 1) +#define MT2701_PIN_8_SPI1_MI__FUNC_SPI1_MO (MTK_PIN_NO(8) | 2) +#define MT2701_PIN_8_SPI1_MI__FUNC_KCOL1 (MTK_PIN_NO(8) | 4) +#define MT2701_PIN_8_SPI1_MI__FUNC_DBG_MON_B_13 (MTK_PIN_NO(8) | 7) + +#define MT2701_PIN_9_SPI1_MO__FUNC_GPIO9 (MTK_PIN_NO(9) | 0) +#define MT2701_PIN_9_SPI1_MO__FUNC_SPI1_MO (MTK_PIN_NO(9) | 1) +#define MT2701_PIN_9_SPI1_MO__FUNC_SPI1_MI (MTK_PIN_NO(9) | 2) +#define MT2701_PIN_9_SPI1_MO__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(9) | 3) +#define MT2701_PIN_9_SPI1_MO__FUNC_KCOL2 (MTK_PIN_NO(9) | 4) +#define MT2701_PIN_9_SPI1_MO__FUNC_DBG_MON_B_14 (MTK_PIN_NO(9) | 7) + +#define MT2701_PIN_10_RTC32K_CK__FUNC_GPIO10 (MTK_PIN_NO(10) | 0) +#define MT2701_PIN_10_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(10) | 1) + +#define MT2701_PIN_11_WATCHDOG__FUNC_GPIO11 (MTK_PIN_NO(11) | 0) +#define MT2701_PIN_11_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(11) | 1) + +#define MT2701_PIN_12_SRCLKENA__FUNC_GPIO12 (MTK_PIN_NO(12) | 0) +#define MT2701_PIN_12_SRCLKENA__FUNC_SRCLKENA (MTK_PIN_NO(12) | 1) + +#define MT2701_PIN_13_SRCLKENAI__FUNC_GPIO13 (MTK_PIN_NO(13) | 0) +#define MT2701_PIN_13_SRCLKENAI__FUNC_SRCLKENAI (MTK_PIN_NO(13) | 1) + +#define MT2701_PIN_14_URXD2__FUNC_GPIO14 (MTK_PIN_NO(14) | 0) +#define MT2701_PIN_14_URXD2__FUNC_URXD2 (MTK_PIN_NO(14) | 1) +#define MT2701_PIN_14_URXD2__FUNC_UTXD2 (MTK_PIN_NO(14) | 2) +#define MT2701_PIN_14_URXD2__FUNC_SRCCLKENAI2 (MTK_PIN_NO(14) | 5) +#define MT2701_PIN_14_URXD2__FUNC_DBG_MON_B_30 (MTK_PIN_NO(14) | 7) + +#define MT2701_PIN_15_UTXD2__FUNC_GPIO15 (MTK_PIN_NO(15) | 0) +#define MT2701_PIN_15_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(15) | 1) +#define MT2701_PIN_15_UTXD2__FUNC_URXD2 (MTK_PIN_NO(15) | 2) +#define MT2701_PIN_15_UTXD2__FUNC_DBG_MON_B_31 (MTK_PIN_NO(15) | 7) + +#define MT2701_PIN_18_PCM_CLK__FUNC_GPIO18 (MTK_PIN_NO(18) | 0) +#define MT2701_PIN_18_PCM_CLK__FUNC_PCM_CLK0 (MTK_PIN_NO(18) | 1) +#define MT2701_PIN_18_PCM_CLK__FUNC_MRG_CLK (MTK_PIN_NO(18) | 2) +#define MT2701_PIN_18_PCM_CLK__FUNC_MM_TEST_CK (MTK_PIN_NO(18) | 4) +#define MT2701_PIN_18_PCM_CLK__FUNC_CONN_DSP_JCK (MTK_PIN_NO(18) | 5) +#define MT2701_PIN_18_PCM_CLK__FUNC_WCN_PCM_CLKO (MTK_PIN_NO(18) | 6) +#define MT2701_PIN_18_PCM_CLK__FUNC_DBG_MON_A_3 (MTK_PIN_NO(18) | 7) + +#define MT2701_PIN_19_PCM_SYNC__FUNC_GPIO19 (MTK_PIN_NO(19) | 0) +#define MT2701_PIN_19_PCM_SYNC__FUNC_PCM_SYNC (MTK_PIN_NO(19) | 1) +#define MT2701_PIN_19_PCM_SYNC__FUNC_MRG_SYNC (MTK_PIN_NO(19) | 2) +#define MT2701_PIN_19_PCM_SYNC__FUNC_CONN_DSP_JINTP (MTK_PIN_NO(19) | 5) +#define MT2701_PIN_19_PCM_SYNC__FUNC_WCN_PCM_SYNC (MTK_PIN_NO(19) | 6) +#define MT2701_PIN_19_PCM_SYNC__FUNC_DBG_MON_A_5 (MTK_PIN_NO(19) | 7) + +#define MT2701_PIN_20_PCM_RX__FUNC_GPIO20 (MTK_PIN_NO(20) | 0) +#define MT2701_PIN_20_PCM_RX__FUNC_PCM_RX (MTK_PIN_NO(20) | 1) +#define MT2701_PIN_20_PCM_RX__FUNC_MRG_RX (MTK_PIN_NO(20) | 2) +#define MT2701_PIN_20_PCM_RX__FUNC_MRG_TX (MTK_PIN_NO(20) | 3) +#define MT2701_PIN_20_PCM_RX__FUNC_PCM_TX (MTK_PIN_NO(20) | 4) +#define MT2701_PIN_20_PCM_RX__FUNC_CONN_DSP_JDI (MTK_PIN_NO(20) | 5) +#define MT2701_PIN_20_PCM_RX__FUNC_WCN_PCM_RX (MTK_PIN_NO(20) | 6) +#define MT2701_PIN_20_PCM_RX__FUNC_DBG_MON_A_4 (MTK_PIN_NO(20) | 7) + +#define MT2701_PIN_21_PCM_TX__FUNC_GPIO21 (MTK_PIN_NO(21) | 0) +#define MT2701_PIN_21_PCM_TX__FUNC_PCM_TX (MTK_PIN_NO(21) | 1) +#define MT2701_PIN_21_PCM_TX__FUNC_MRG_TX (MTK_PIN_NO(21) | 2) +#define MT2701_PIN_21_PCM_TX__FUNC_MRG_RX (MTK_PIN_NO(21) | 3) +#define MT2701_PIN_21_PCM_TX__FUNC_PCM_RX (MTK_PIN_NO(21) | 4) +#define MT2701_PIN_21_PCM_TX__FUNC_CONN_DSP_JMS (MTK_PIN_NO(21) | 5) +#define MT2701_PIN_21_PCM_TX__FUNC_WCN_PCM_TX (MTK_PIN_NO(21) | 6) +#define MT2701_PIN_21_PCM_TX__FUNC_DBG_MON_A_2 (MTK_PIN_NO(21) | 7) + +#define MT2701_PIN_22_EINT0__FUNC_GPIO22 (MTK_PIN_NO(22) | 0) +#define MT2701_PIN_22_EINT0__FUNC_UCTS0 (MTK_PIN_NO(22) | 1) +#define MT2701_PIN_22_EINT0__FUNC_KCOL3 (MTK_PIN_NO(22) | 3) +#define MT2701_PIN_22_EINT0__FUNC_CONN_DSP_JDO (MTK_PIN_NO(22) | 4) +#define MT2701_PIN_22_EINT0__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(22) | 5) +#define MT2701_PIN_22_EINT0__FUNC_DBG_MON_A_30 (MTK_PIN_NO(22) | 7) +#define MT2701_PIN_22_EINT0__FUNC_PCIE0_PERST_N (MTK_PIN_NO(22) | 10) + +#define MT2701_PIN_23_EINT1__FUNC_GPIO23 (MTK_PIN_NO(23) | 0) +#define MT2701_PIN_23_EINT1__FUNC_URTS0 (MTK_PIN_NO(23) | 1) +#define MT2701_PIN_23_EINT1__FUNC_KCOL2 (MTK_PIN_NO(23) | 3) +#define MT2701_PIN_23_EINT1__FUNC_CONN_MCU_TDO (MTK_PIN_NO(23) | 4) +#define MT2701_PIN_23_EINT1__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(23) | 5) +#define MT2701_PIN_23_EINT1__FUNC_DBG_MON_A_29 (MTK_PIN_NO(23) | 7) +#define MT2701_PIN_23_EINT1__FUNC_PCIE1_PERST_N (MTK_PIN_NO(23) | 10) + +#define MT2701_PIN_24_EINT2__FUNC_GPIO24 (MTK_PIN_NO(24) | 0) +#define MT2701_PIN_24_EINT2__FUNC_UCTS1 (MTK_PIN_NO(24) | 1) +#define MT2701_PIN_24_EINT2__FUNC_KCOL1 (MTK_PIN_NO(24) | 3) +#define MT2701_PIN_24_EINT2__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(24) | 4) +#define MT2701_PIN_24_EINT2__FUNC_DBG_MON_A_28 (MTK_PIN_NO(24) | 7) +#define MT2701_PIN_24_EINT2__FUNC_PCIE2_PERST_N (MTK_PIN_NO(24) | 10) + +#define MT2701_PIN_25_EINT3__FUNC_GPIO25 (MTK_PIN_NO(25) | 0) +#define MT2701_PIN_25_EINT3__FUNC_URTS1 (MTK_PIN_NO(25) | 1) +#define MT2701_PIN_25_EINT3__FUNC_KCOL0 (MTK_PIN_NO(25) | 3) +#define MT2701_PIN_25_EINT3__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(25) | 4) +#define MT2701_PIN_25_EINT3__FUNC_DBG_MON_A_27 (MTK_PIN_NO(25) | 7) + +#define MT2701_PIN_26_EINT4__FUNC_GPIO26 (MTK_PIN_NO(26) | 0) +#define MT2701_PIN_26_EINT4__FUNC_UCTS3 (MTK_PIN_NO(26) | 1) +#define MT2701_PIN_26_EINT4__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(26) | 2) +#define MT2701_PIN_26_EINT4__FUNC_KROW3 (MTK_PIN_NO(26) | 3) +#define MT2701_PIN_26_EINT4__FUNC_CONN_MCU_TCK0 (MTK_PIN_NO(26) | 4) +#define MT2701_PIN_26_EINT4__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(26) | 5) +#define MT2701_PIN_26_EINT4__FUNC_PCIE2_WAKE_N (MTK_PIN_NO(26) | 6) +#define MT2701_PIN_26_EINT4__FUNC_DBG_MON_A_26 (MTK_PIN_NO(26) | 7) + +#define MT2701_PIN_27_EINT5__FUNC_GPIO27 (MTK_PIN_NO(27) | 0) +#define MT2701_PIN_27_EINT5__FUNC_URTS3 (MTK_PIN_NO(27) | 1) +#define MT2701_PIN_27_EINT5__FUNC_IDDIG_P1 (MTK_PIN_NO(27) | 2) +#define MT2701_PIN_27_EINT5__FUNC_KROW2 (MTK_PIN_NO(27) | 3) +#define MT2701_PIN_27_EINT5__FUNC_CONN_MCU_TDI (MTK_PIN_NO(27) | 4) +#define MT2701_PIN_27_EINT5__FUNC_PCIE1_WAKE_N (MTK_PIN_NO(27) | 6) +#define MT2701_PIN_27_EINT5__FUNC_DBG_MON_A_25 (MTK_PIN_NO(27) | 7) + +#define MT2701_PIN_28_EINT6__FUNC_GPIO28 (MTK_PIN_NO(28) | 0) +#define MT2701_PIN_28_EINT6__FUNC_DRV_VBUS (MTK_PIN_NO(28) | 1) +#define MT2701_PIN_28_EINT6__FUNC_KROW1 (MTK_PIN_NO(28) | 3) +#define MT2701_PIN_28_EINT6__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(28) | 4) +#define MT2701_PIN_28_EINT6__FUNC_PCIE0_WAKE_N (MTK_PIN_NO(28) | 6) +#define MT2701_PIN_28_EINT6__FUNC_DBG_MON_A_24 (MTK_PIN_NO(28) | 7) + +#define MT2701_PIN_29_EINT7__FUNC_GPIO29 (MTK_PIN_NO(29) | 0) +#define MT2701_PIN_29_EINT7__FUNC_IDDIG (MTK_PIN_NO(29) | 1) +#define MT2701_PIN_29_EINT7__FUNC_MSDC1_WP (MTK_PIN_NO(29) | 2) +#define MT2701_PIN_29_EINT7__FUNC_KROW0 (MTK_PIN_NO(29) | 3) +#define MT2701_PIN_29_EINT7__FUNC_CONN_MCU_TMS (MTK_PIN_NO(29) | 4) +#define MT2701_PIN_29_EINT7__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(29) | 5) +#define MT2701_PIN_29_EINT7__FUNC_DBG_MON_A_23 (MTK_PIN_NO(29) | 7) +#define MT2701_PIN_29_EINT7__FUNC_PCIE2_PERST_N (MTK_PIN_NO(29) | 14) + +#define MT2701_PIN_33_I2S1_DATA__FUNC_GPIO33 (MTK_PIN_NO(33) | 0) +#define MT2701_PIN_33_I2S1_DATA__FUNC_I2S1_DATA (MTK_PIN_NO(33) | 1) +#define MT2701_PIN_33_I2S1_DATA__FUNC_I2S1_DATA_BYPS (MTK_PIN_NO(33) | 2) +#define MT2701_PIN_33_I2S1_DATA__FUNC_PCM_TX (MTK_PIN_NO(33) | 3) +#define MT2701_PIN_33_I2S1_DATA__FUNC_IMG_TEST_CK (MTK_PIN_NO(33) | 4) +#define MT2701_PIN_33_I2S1_DATA__FUNC_G1_RXD0 (MTK_PIN_NO(33) | 5) +#define MT2701_PIN_33_I2S1_DATA__FUNC_WCN_PCM_TX (MTK_PIN_NO(33) | 6) +#define MT2701_PIN_33_I2S1_DATA__FUNC_DBG_MON_B_8 (MTK_PIN_NO(33) | 7) + +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_GPIO34 (MTK_PIN_NO(34) | 0) +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_I2S1_DATA_IN (MTK_PIN_NO(34) | 1) +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_PCM_RX (MTK_PIN_NO(34) | 3) +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_VDEC_TEST_CK (MTK_PIN_NO(34) | 4) +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_G1_RXD1 (MTK_PIN_NO(34) | 5) +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_WCN_PCM_RX (MTK_PIN_NO(34) | 6) +#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_DBG_MON_B_7 (MTK_PIN_NO(34) | 7) + +#define MT2701_PIN_35_I2S1_BCK__FUNC_GPIO35 (MTK_PIN_NO(35) | 0) +#define MT2701_PIN_35_I2S1_BCK__FUNC_I2S1_BCK (MTK_PIN_NO(35) | 1) +#define MT2701_PIN_35_I2S1_BCK__FUNC_PCM_CLK0 (MTK_PIN_NO(35) | 3) +#define MT2701_PIN_35_I2S1_BCK__FUNC_G1_RXD2 (MTK_PIN_NO(35) | 5) +#define MT2701_PIN_35_I2S1_BCK__FUNC_WCN_PCM_CLKO (MTK_PIN_NO(35) | 6) +#define MT2701_PIN_35_I2S1_BCK__FUNC_DBG_MON_B_9 (MTK_PIN_NO(35) | 7) + +#define MT2701_PIN_36_I2S1_LRCK__FUNC_GPIO36 (MTK_PIN_NO(36) | 0) +#define MT2701_PIN_36_I2S1_LRCK__FUNC_I2S1_LRCK (MTK_PIN_NO(36) | 1) +#define MT2701_PIN_36_I2S1_LRCK__FUNC_PCM_SYNC (MTK_PIN_NO(36) | 3) +#define MT2701_PIN_36_I2S1_LRCK__FUNC_G1_RXD3 (MTK_PIN_NO(36) | 5) +#define MT2701_PIN_36_I2S1_LRCK__FUNC_WCN_PCM_SYNC (MTK_PIN_NO(36) | 6) +#define MT2701_PIN_36_I2S1_LRCK__FUNC_DBG_MON_B_10 (MTK_PIN_NO(36) | 7) + +#define MT2701_PIN_37_I2S1_MCLK__FUNC_GPIO37 (MTK_PIN_NO(37) | 0) +#define MT2701_PIN_37_I2S1_MCLK__FUNC_I2S1_MCLK (MTK_PIN_NO(37) | 1) +#define MT2701_PIN_37_I2S1_MCLK__FUNC_G1_RXDV (MTK_PIN_NO(37) | 5) +#define MT2701_PIN_37_I2S1_MCLK__FUNC_DBG_MON_B_11 (MTK_PIN_NO(37) | 7) + +#define MT2701_PIN_39_JTMS__FUNC_GPIO39 (MTK_PIN_NO(39) | 0) +#define MT2701_PIN_39_JTMS__FUNC_JTMS (MTK_PIN_NO(39) | 1) +#define MT2701_PIN_39_JTMS__FUNC_CONN_MCU_TMS (MTK_PIN_NO(39) | 2) +#define MT2701_PIN_39_JTMS__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(39) | 3) +#define MT2701_PIN_39_JTMS__FUNC_DFD_TMS_XI (MTK_PIN_NO(39) | 4) + +#define MT2701_PIN_40_JTCK__FUNC_GPIO40 (MTK_PIN_NO(40) | 0) +#define MT2701_PIN_40_JTCK__FUNC_JTCK (MTK_PIN_NO(40) | 1) +#define MT2701_PIN_40_JTCK__FUNC_CONN_MCU_TCK1 (MTK_PIN_NO(40) | 2) +#define MT2701_PIN_40_JTCK__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(40) | 3) +#define MT2701_PIN_40_JTCK__FUNC_DFD_TCK_XI (MTK_PIN_NO(40) | 4) + +#define MT2701_PIN_41_JTDI__FUNC_GPIO41 (MTK_PIN_NO(41) | 0) +#define MT2701_PIN_41_JTDI__FUNC_JTDI (MTK_PIN_NO(41) | 1) +#define MT2701_PIN_41_JTDI__FUNC_CONN_MCU_TDI (MTK_PIN_NO(41) | 2) +#define MT2701_PIN_41_JTDI__FUNC_DFD_TDI_XI (MTK_PIN_NO(41) | 4) + +#define MT2701_PIN_42_JTDO__FUNC_GPIO42 (MTK_PIN_NO(42) | 0) +#define MT2701_PIN_42_JTDO__FUNC_JTDO (MTK_PIN_NO(42) | 1) +#define MT2701_PIN_42_JTDO__FUNC_CONN_MCU_TDO (MTK_PIN_NO(42) | 2) +#define MT2701_PIN_42_JTDO__FUNC_DFD_TDO (MTK_PIN_NO(42) | 4) + +#define MT2701_PIN_43_NCLE__FUNC_GPIO43 (MTK_PIN_NO(43) | 0) +#define MT2701_PIN_43_NCLE__FUNC_NCLE (MTK_PIN_NO(43) | 1) +#define MT2701_PIN_43_NCLE__FUNC_EXT_XCS2 (MTK_PIN_NO(43) | 2) + +#define MT2701_PIN_44_NCEB1__FUNC_GPIO44 (MTK_PIN_NO(44) | 0) +#define MT2701_PIN_44_NCEB1__FUNC_NCEB1 (MTK_PIN_NO(44) | 1) +#define MT2701_PIN_44_NCEB1__FUNC_IDDIG (MTK_PIN_NO(44) | 2) + +#define MT2701_PIN_45_NCEB0__FUNC_GPIO45 (MTK_PIN_NO(45) | 0) +#define MT2701_PIN_45_NCEB0__FUNC_NCEB0 (MTK_PIN_NO(45) | 1) +#define MT2701_PIN_45_NCEB0__FUNC_DRV_VBUS (MTK_PIN_NO(45) | 2) + +#define MT2701_PIN_46_IR__FUNC_GPIO46 (MTK_PIN_NO(46) | 0) +#define MT2701_PIN_46_IR__FUNC_IR (MTK_PIN_NO(46) | 1) + +#define MT2701_PIN_47_NREB__FUNC_GPIO47 (MTK_PIN_NO(47) | 0) +#define MT2701_PIN_47_NREB__FUNC_NREB (MTK_PIN_NO(47) | 1) +#define MT2701_PIN_47_NREB__FUNC_IDDIG_P1 (MTK_PIN_NO(47) | 2) + +#define MT2701_PIN_48_NRNB__FUNC_GPIO48 (MTK_PIN_NO(48) | 0) +#define MT2701_PIN_48_NRNB__FUNC_NRNB (MTK_PIN_NO(48) | 1) +#define MT2701_PIN_48_NRNB__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(48) | 2) + +#define MT2701_PIN_49_I2S0_DATA__FUNC_GPIO49 (MTK_PIN_NO(49) | 0) +#define MT2701_PIN_49_I2S0_DATA__FUNC_I2S0_DATA (MTK_PIN_NO(49) | 1) +#define MT2701_PIN_49_I2S0_DATA__FUNC_I2S0_DATA_BYPS (MTK_PIN_NO(49) | 2) +#define MT2701_PIN_49_I2S0_DATA__FUNC_PCM_TX (MTK_PIN_NO(49) | 3) +#define MT2701_PIN_49_I2S0_DATA__FUNC_WCN_I2S_DO (MTK_PIN_NO(49) | 6) +#define MT2701_PIN_49_I2S0_DATA__FUNC_DBG_MON_B_3 (MTK_PIN_NO(49) | 7) + +#define MT2701_PIN_53_SPI0_CSN__FUNC_GPIO53 (MTK_PIN_NO(53) | 0) +#define MT2701_PIN_53_SPI0_CSN__FUNC_SPI0_CS (MTK_PIN_NO(53) | 1) +#define MT2701_PIN_53_SPI0_CSN__FUNC_SPDIF (MTK_PIN_NO(53) | 3) +#define MT2701_PIN_53_SPI0_CSN__FUNC_ADC_CK (MTK_PIN_NO(53) | 4) +#define MT2701_PIN_53_SPI0_CSN__FUNC_PWM1 (MTK_PIN_NO(53) | 5) +#define MT2701_PIN_53_SPI0_CSN__FUNC_DBG_MON_A_7 (MTK_PIN_NO(53) | 7) + +#define MT2701_PIN_54_SPI0_CK__FUNC_GPIO54 (MTK_PIN_NO(54) | 0) +#define MT2701_PIN_54_SPI0_CK__FUNC_SPI0_CK (MTK_PIN_NO(54) | 1) +#define MT2701_PIN_54_SPI0_CK__FUNC_SPDIF_IN1 (MTK_PIN_NO(54) | 3) +#define MT2701_PIN_54_SPI0_CK__FUNC_ADC_DAT_IN (MTK_PIN_NO(54) | 4) +#define MT2701_PIN_54_SPI0_CK__FUNC_DBG_MON_A_10 (MTK_PIN_NO(54) | 7) + +#define MT2701_PIN_55_SPI0_MI__FUNC_GPIO55 (MTK_PIN_NO(55) | 0) +#define MT2701_PIN_55_SPI0_MI__FUNC_SPI0_MI (MTK_PIN_NO(55) | 1) +#define MT2701_PIN_55_SPI0_MI__FUNC_SPI0_MO (MTK_PIN_NO(55) | 2) +#define MT2701_PIN_55_SPI0_MI__FUNC_MSDC1_WP (MTK_PIN_NO(55) | 3) +#define MT2701_PIN_55_SPI0_MI__FUNC_ADC_WS (MTK_PIN_NO(55) | 4) +#define MT2701_PIN_55_SPI0_MI__FUNC_PWM2 (MTK_PIN_NO(55) | 5) +#define MT2701_PIN_55_SPI0_MI__FUNC_DBG_MON_A_8 (MTK_PIN_NO(55) | 7) + +#define MT2701_PIN_56_SPI0_MO__FUNC_GPIO56 (MTK_PIN_NO(56) | 0) +#define MT2701_PIN_56_SPI0_MO__FUNC_SPI0_MO (MTK_PIN_NO(56) | 1) +#define MT2701_PIN_56_SPI0_MO__FUNC_SPI0_MI (MTK_PIN_NO(56) | 2) +#define MT2701_PIN_56_SPI0_MO__FUNC_SPDIF_IN0 (MTK_PIN_NO(56) | 3) +#define MT2701_PIN_56_SPI0_MO__FUNC_DBG_MON_A_9 (MTK_PIN_NO(56) | 7) + +#define MT2701_PIN_57_SDA1__FUNC_GPIO57 (MTK_PIN_NO(57) | 0) +#define MT2701_PIN_57_SDA1__FUNC_SDA1 (MTK_PIN_NO(57) | 1) + +#define MT2701_PIN_58_SCL1__FUNC_GPIO58 (MTK_PIN_NO(58) | 0) +#define MT2701_PIN_58_SCL1__FUNC_SCL1 (MTK_PIN_NO(58) | 1) + +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_GPIO72 (MTK_PIN_NO(72) | 0) +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_I2S0_DATA_IN (MTK_PIN_NO(72) | 1) +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_PCM_RX (MTK_PIN_NO(72) | 3) +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_PWM0 (MTK_PIN_NO(72) | 4) +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_DISP_PWM (MTK_PIN_NO(72) | 5) +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_WCN_I2S_DI (MTK_PIN_NO(72) | 6) +#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_DBG_MON_B_2 (MTK_PIN_NO(72) | 7) + +#define MT2701_PIN_73_I2S0_LRCK__FUNC_GPIO73 (MTK_PIN_NO(73) | 0) +#define MT2701_PIN_73_I2S0_LRCK__FUNC_I2S0_LRCK (MTK_PIN_NO(73) | 1) +#define MT2701_PIN_73_I2S0_LRCK__FUNC_PCM_SYNC (MTK_PIN_NO(73) | 3) +#define MT2701_PIN_73_I2S0_LRCK__FUNC_WCN_I2S_LRCK (MTK_PIN_NO(73) | 6) +#define MT2701_PIN_73_I2S0_LRCK__FUNC_DBG_MON_B_5 (MTK_PIN_NO(73) | 7) + +#define MT2701_PIN_74_I2S0_BCK__FUNC_GPIO74 (MTK_PIN_NO(74) | 0) +#define MT2701_PIN_74_I2S0_BCK__FUNC_I2S0_BCK (MTK_PIN_NO(74) | 1) +#define MT2701_PIN_74_I2S0_BCK__FUNC_PCM_CLK0 (MTK_PIN_NO(74) | 3) +#define MT2701_PIN_74_I2S0_BCK__FUNC_WCN_I2S_BCK (MTK_PIN_NO(74) | 6) +#define MT2701_PIN_74_I2S0_BCK__FUNC_DBG_MON_B_4 (MTK_PIN_NO(74) | 7) + +#define MT2701_PIN_75_SDA0__FUNC_GPIO75 (MTK_PIN_NO(75) | 0) +#define MT2701_PIN_75_SDA0__FUNC_SDA0 (MTK_PIN_NO(75) | 1) + +#define MT2701_PIN_76_SCL0__FUNC_GPIO76 (MTK_PIN_NO(76) | 0) +#define MT2701_PIN_76_SCL0__FUNC_SCL0 (MTK_PIN_NO(76) | 1) + +#define MT2701_PIN_77_SDA2__FUNC_GPIO77 (MTK_PIN_NO(77) | 0) +#define MT2701_PIN_77_SDA2__FUNC_SDA2 (MTK_PIN_NO(77) | 1) + +#define MT2701_PIN_78_SCL2__FUNC_GPIO78 (MTK_PIN_NO(78) | 0) +#define MT2701_PIN_78_SCL2__FUNC_SCL2 (MTK_PIN_NO(78) | 1) + +#define MT2701_PIN_79_URXD0__FUNC_GPIO79 (MTK_PIN_NO(79) | 0) +#define MT2701_PIN_79_URXD0__FUNC_URXD0 (MTK_PIN_NO(79) | 1) +#define MT2701_PIN_79_URXD0__FUNC_UTXD0 (MTK_PIN_NO(79) | 2) +#define MT2701_PIN_79_URXD0__FUNC_ (MTK_PIN_NO(79) | 5) + +#define MT2701_PIN_80_UTXD0__FUNC_GPIO80 (MTK_PIN_NO(80) | 0) +#define MT2701_PIN_80_UTXD0__FUNC_UTXD0 (MTK_PIN_NO(80) | 1) +#define MT2701_PIN_80_UTXD0__FUNC_URXD0 (MTK_PIN_NO(80) | 2) + +#define MT2701_PIN_81_URXD1__FUNC_GPIO81 (MTK_PIN_NO(81) | 0) +#define MT2701_PIN_81_URXD1__FUNC_URXD1 (MTK_PIN_NO(81) | 1) +#define MT2701_PIN_81_URXD1__FUNC_UTXD1 (MTK_PIN_NO(81) | 2) + +#define MT2701_PIN_82_UTXD1__FUNC_GPIO82 (MTK_PIN_NO(82) | 0) +#define MT2701_PIN_82_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(82) | 1) +#define MT2701_PIN_82_UTXD1__FUNC_URXD1 (MTK_PIN_NO(82) | 2) + +#define MT2701_PIN_83_LCM_RST__FUNC_GPIO83 (MTK_PIN_NO(83) | 0) +#define MT2701_PIN_83_LCM_RST__FUNC_LCM_RST (MTK_PIN_NO(83) | 1) +#define MT2701_PIN_83_LCM_RST__FUNC_VDAC_CK_XI (MTK_PIN_NO(83) | 2) +#define MT2701_PIN_83_LCM_RST__FUNC_DBG_MON_B_1 (MTK_PIN_NO(83) | 7) + +#define MT2701_PIN_84_DSI_TE__FUNC_GPIO84 (MTK_PIN_NO(84) | 0) +#define MT2701_PIN_84_DSI_TE__FUNC_DSI_TE (MTK_PIN_NO(84) | 1) +#define MT2701_PIN_84_DSI_TE__FUNC_DBG_MON_B_0 (MTK_PIN_NO(84) | 7) + +#define MT2701_PIN_91_TDN3__FUNC_GPI91 (MTK_PIN_NO(91) | 0) +#define MT2701_PIN_91_TDN3__FUNC_TDN3 (MTK_PIN_NO(91) | 1) + +#define MT2701_PIN_92_TDP3__FUNC_GPI92 (MTK_PIN_NO(92) | 0) +#define MT2701_PIN_92_TDP3__FUNC_TDP3 (MTK_PIN_NO(92) | 1) + +#define MT2701_PIN_93_TDN2__FUNC_GPI93 (MTK_PIN_NO(93) | 0) +#define MT2701_PIN_93_TDN2__FUNC_TDN2 (MTK_PIN_NO(93) | 1) + +#define MT2701_PIN_94_TDP2__FUNC_GPI94 (MTK_PIN_NO(94) | 0) +#define MT2701_PIN_94_TDP2__FUNC_TDP2 (MTK_PIN_NO(94) | 1) + +#define MT2701_PIN_95_TCN__FUNC_GPI95 (MTK_PIN_NO(95) | 0) +#define MT2701_PIN_95_TCN__FUNC_TCN (MTK_PIN_NO(95) | 1) + +#define MT2701_PIN_96_TCP__FUNC_GPI96 (MTK_PIN_NO(96) | 0) +#define MT2701_PIN_96_TCP__FUNC_TCP (MTK_PIN_NO(96) | 1) + +#define MT2701_PIN_97_TDN1__FUNC_GPI97 (MTK_PIN_NO(97) | 0) +#define MT2701_PIN_97_TDN1__FUNC_TDN1 (MTK_PIN_NO(97) | 1) + +#define MT2701_PIN_98_TDP1__FUNC_GPI98 (MTK_PIN_NO(98) | 0) +#define MT2701_PIN_98_TDP1__FUNC_TDP1 (MTK_PIN_NO(98) | 1) + +#define MT2701_PIN_99_TDN0__FUNC_GPI99 (MTK_PIN_NO(99) | 0) +#define MT2701_PIN_99_TDN0__FUNC_TDN0 (MTK_PIN_NO(99) | 1) + +#define MT2701_PIN_100_TDP0__FUNC_GPI100 (MTK_PIN_NO(100) | 0) +#define MT2701_PIN_100_TDP0__FUNC_TDP0 (MTK_PIN_NO(100) | 1) + +#define MT2701_PIN_101_SPI2_CSN__FUNC_GPIO101 (MTK_PIN_NO(101) | 0) +#define MT2701_PIN_101_SPI2_CSN__FUNC_SPI2_CS (MTK_PIN_NO(101) | 1) +#define MT2701_PIN_101_SPI2_CSN__FUNC_SCL3 (MTK_PIN_NO(101) | 3) +#define MT2701_PIN_101_SPI2_CSN__FUNC_KROW0 (MTK_PIN_NO(101) | 4) + +#define MT2701_PIN_102_SPI2_MI__FUNC_GPIO102 (MTK_PIN_NO(102) | 0) +#define MT2701_PIN_102_SPI2_MI__FUNC_SPI2_MI (MTK_PIN_NO(102) | 1) +#define MT2701_PIN_102_SPI2_MI__FUNC_SPI2_MO (MTK_PIN_NO(102) | 2) +#define MT2701_PIN_102_SPI2_MI__FUNC_SDA3 (MTK_PIN_NO(102) | 3) +#define MT2701_PIN_102_SPI2_MI__FUNC_KROW1 (MTK_PIN_NO(102) | 4) + +#define MT2701_PIN_103_SPI2_MO__FUNC_GPIO103 (MTK_PIN_NO(103) | 0) +#define MT2701_PIN_103_SPI2_MO__FUNC_SPI2_MO (MTK_PIN_NO(103) | 1) +#define MT2701_PIN_103_SPI2_MO__FUNC_SPI2_MI (MTK_PIN_NO(103) | 2) +#define MT2701_PIN_103_SPI2_MO__FUNC_SCL3 (MTK_PIN_NO(103) | 3) +#define MT2701_PIN_103_SPI2_MO__FUNC_KROW2 (MTK_PIN_NO(103) | 4) + +#define MT2701_PIN_104_SPI2_CLK__FUNC_GPIO104 (MTK_PIN_NO(104) | 0) +#define MT2701_PIN_104_SPI2_CLK__FUNC_SPI2_CK (MTK_PIN_NO(104) | 1) +#define MT2701_PIN_104_SPI2_CLK__FUNC_SDA3 (MTK_PIN_NO(104) | 3) +#define MT2701_PIN_104_SPI2_CLK__FUNC_KROW3 (MTK_PIN_NO(104) | 4) + +#define MT2701_PIN_105_MSDC1_CMD__FUNC_GPIO105 (MTK_PIN_NO(105) | 0) +#define MT2701_PIN_105_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(105) | 1) +#define MT2701_PIN_105_MSDC1_CMD__FUNC_ANT_SEL0 (MTK_PIN_NO(105) | 2) +#define MT2701_PIN_105_MSDC1_CMD__FUNC_SDA1 (MTK_PIN_NO(105) | 3) +#define MT2701_PIN_105_MSDC1_CMD__FUNC_I2SOUT_BCK (MTK_PIN_NO(105) | 6) +#define MT2701_PIN_105_MSDC1_CMD__FUNC_DBG_MON_B_27 (MTK_PIN_NO(105) | 7) + +#define MT2701_PIN_106_MSDC1_CLK__FUNC_GPIO106 (MTK_PIN_NO(106) | 0) +#define MT2701_PIN_106_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(106) | 1) +#define MT2701_PIN_106_MSDC1_CLK__FUNC_ANT_SEL1 (MTK_PIN_NO(106) | 2) +#define MT2701_PIN_106_MSDC1_CLK__FUNC_SCL1 (MTK_PIN_NO(106) | 3) +#define MT2701_PIN_106_MSDC1_CLK__FUNC_I2SOUT_LRCK (MTK_PIN_NO(106) | 6) +#define MT2701_PIN_106_MSDC1_CLK__FUNC_DBG_MON_B_28 (MTK_PIN_NO(106) | 7) + +#define MT2701_PIN_107_MSDC1_DAT0__FUNC_GPIO107 (MTK_PIN_NO(107) | 0) +#define MT2701_PIN_107_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(107) | 1) +#define MT2701_PIN_107_MSDC1_DAT0__FUNC_ANT_SEL2 (MTK_PIN_NO(107) | 2) +#define MT2701_PIN_107_MSDC1_DAT0__FUNC_UTXD0 (MTK_PIN_NO(107) | 5) +#define MT2701_PIN_107_MSDC1_DAT0__FUNC_I2SOUT_DATA_OUT (MTK_PIN_NO(107) | 6) +#define MT2701_PIN_107_MSDC1_DAT0__FUNC_DBG_MON_B_26 (MTK_PIN_NO(107) | 7) + +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_GPIO108 (MTK_PIN_NO(108) | 0) +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(108) | 1) +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_ANT_SEL3 (MTK_PIN_NO(108) | 2) +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_PWM0 (MTK_PIN_NO(108) | 3) +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_URXD0 (MTK_PIN_NO(108) | 5) +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_PWM1 (MTK_PIN_NO(108) | 6) +#define MT2701_PIN_108_MSDC1_DAT1__FUNC_DBG_MON_B_25 (MTK_PIN_NO(108) | 7) + +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_GPIO109 (MTK_PIN_NO(109) | 0) +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(109) | 1) +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_ANT_SEL4 (MTK_PIN_NO(109) | 2) +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_SDA2 (MTK_PIN_NO(109) | 3) +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_UTXD1 (MTK_PIN_NO(109) | 5) +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_PWM2 (MTK_PIN_NO(109) | 6) +#define MT2701_PIN_109_MSDC1_DAT2__FUNC_DBG_MON_B_24 (MTK_PIN_NO(109) | 7) + +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_GPIO110 (MTK_PIN_NO(110) | 0) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(110) | 1) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_ANT_SEL5 (MTK_PIN_NO(110) | 2) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_SCL2 (MTK_PIN_NO(110) | 3) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(110) | 4) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_URXD1 (MTK_PIN_NO(110) | 5) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_PWM3 (MTK_PIN_NO(110) | 6) +#define MT2701_PIN_110_MSDC1_DAT3__FUNC_DBG_MON_B_23 (MTK_PIN_NO(110) | 7) + +#define MT2701_PIN_111_MSDC0_DAT7__FUNC_GPIO111 (MTK_PIN_NO(111) | 0) +#define MT2701_PIN_111_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(111) | 1) +#define MT2701_PIN_111_MSDC0_DAT7__FUNC_NLD7 (MTK_PIN_NO(111) | 4) + +#define MT2701_PIN_112_MSDC0_DAT6__FUNC_GPIO112 (MTK_PIN_NO(112) | 0) +#define MT2701_PIN_112_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(112) | 1) +#define MT2701_PIN_112_MSDC0_DAT6__FUNC_NLD6 (MTK_PIN_NO(112) | 4) + +#define MT2701_PIN_113_MSDC0_DAT5__FUNC_GPIO113 (MTK_PIN_NO(113) | 0) +#define MT2701_PIN_113_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(113) | 1) +#define MT2701_PIN_113_MSDC0_DAT5__FUNC_NLD5 (MTK_PIN_NO(113) | 4) + +#define MT2701_PIN_114_MSDC0_DAT4__FUNC_GPIO114 (MTK_PIN_NO(114) | 0) +#define MT2701_PIN_114_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(114) | 1) +#define MT2701_PIN_114_MSDC0_DAT4__FUNC_NLD4 (MTK_PIN_NO(114) | 4) + +#define MT2701_PIN_115_MSDC0_RSTB__FUNC_GPIO115 (MTK_PIN_NO(115) | 0) +#define MT2701_PIN_115_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(115) | 1) +#define MT2701_PIN_115_MSDC0_RSTB__FUNC_NLD8 (MTK_PIN_NO(115) | 4) + +#define MT2701_PIN_116_MSDC0_CMD__FUNC_GPIO116 (MTK_PIN_NO(116) | 0) +#define MT2701_PIN_116_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(116) | 1) +#define MT2701_PIN_116_MSDC0_CMD__FUNC_NALE (MTK_PIN_NO(116) | 4) + +#define MT2701_PIN_117_MSDC0_CLK__FUNC_GPIO117 (MTK_PIN_NO(117) | 0) +#define MT2701_PIN_117_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(117) | 1) +#define MT2701_PIN_117_MSDC0_CLK__FUNC_NWEB (MTK_PIN_NO(117) | 4) + +#define MT2701_PIN_118_MSDC0_DAT3__FUNC_GPIO118 (MTK_PIN_NO(118) | 0) +#define MT2701_PIN_118_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(118) | 1) +#define MT2701_PIN_118_MSDC0_DAT3__FUNC_NLD3 (MTK_PIN_NO(118) | 4) + +#define MT2701_PIN_119_MSDC0_DAT2__FUNC_GPIO119 (MTK_PIN_NO(119) | 0) +#define MT2701_PIN_119_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(119) | 1) +#define MT2701_PIN_119_MSDC0_DAT2__FUNC_NLD2 (MTK_PIN_NO(119) | 4) + +#define MT2701_PIN_120_MSDC0_DAT1__FUNC_GPIO120 (MTK_PIN_NO(120) | 0) +#define MT2701_PIN_120_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(120) | 1) +#define MT2701_PIN_120_MSDC0_DAT1__FUNC_NLD1 (MTK_PIN_NO(120) | 4) + +#define MT2701_PIN_121_MSDC0_DAT0__FUNC_GPIO121 (MTK_PIN_NO(121) | 0) +#define MT2701_PIN_121_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(121) | 1) +#define MT2701_PIN_121_MSDC0_DAT0__FUNC_NLD0 (MTK_PIN_NO(121) | 4) +#define MT2701_PIN_121_MSDC0_DAT0__FUNC_WATCHDOG (MTK_PIN_NO(121) | 5) + +#define MT2701_PIN_122_CEC__FUNC_GPIO122 (MTK_PIN_NO(122) | 0) +#define MT2701_PIN_122_CEC__FUNC_CEC (MTK_PIN_NO(122) | 1) +#define MT2701_PIN_122_CEC__FUNC_SDA2 (MTK_PIN_NO(122) | 4) +#define MT2701_PIN_122_CEC__FUNC_URXD0 (MTK_PIN_NO(122) | 5) + +#define MT2701_PIN_123_HTPLG__FUNC_GPIO123 (MTK_PIN_NO(123) | 0) +#define MT2701_PIN_123_HTPLG__FUNC_HTPLG (MTK_PIN_NO(123) | 1) +#define MT2701_PIN_123_HTPLG__FUNC_SCL2 (MTK_PIN_NO(123) | 4) +#define MT2701_PIN_123_HTPLG__FUNC_UTXD0 (MTK_PIN_NO(123) | 5) + +#define MT2701_PIN_124_HDMISCK__FUNC_GPIO124 (MTK_PIN_NO(124) | 0) +#define MT2701_PIN_124_HDMISCK__FUNC_HDMISCK (MTK_PIN_NO(124) | 1) +#define MT2701_PIN_124_HDMISCK__FUNC_SDA1 (MTK_PIN_NO(124) | 4) +#define MT2701_PIN_124_HDMISCK__FUNC_PWM3 (MTK_PIN_NO(124) | 5) + +#define MT2701_PIN_125_HDMISD__FUNC_GPIO125 (MTK_PIN_NO(125) | 0) +#define MT2701_PIN_125_HDMISD__FUNC_HDMISD (MTK_PIN_NO(125) | 1) +#define MT2701_PIN_125_HDMISD__FUNC_SCL1 (MTK_PIN_NO(125) | 4) +#define MT2701_PIN_125_HDMISD__FUNC_PWM4 (MTK_PIN_NO(125) | 5) + +#define MT2701_PIN_126_I2S0_MCLK__FUNC_GPIO126 (MTK_PIN_NO(126) | 0) +#define MT2701_PIN_126_I2S0_MCLK__FUNC_I2S0_MCLK (MTK_PIN_NO(126) | 1) +#define MT2701_PIN_126_I2S0_MCLK__FUNC_WCN_I2S_MCLK (MTK_PIN_NO(126) | 6) +#define MT2701_PIN_126_I2S0_MCLK__FUNC_DBG_MON_B_6 (MTK_PIN_NO(126) | 7) + +#define MT2701_PIN_199_SPI1_CLK__FUNC_GPIO199 (MTK_PIN_NO(199) | 0) +#define MT2701_PIN_199_SPI1_CLK__FUNC_SPI1_CK (MTK_PIN_NO(199) | 1) +#define MT2701_PIN_199_SPI1_CLK__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(199) | 3) +#define MT2701_PIN_199_SPI1_CLK__FUNC_KCOL3 (MTK_PIN_NO(199) | 4) +#define MT2701_PIN_199_SPI1_CLK__FUNC_DBG_MON_B_15 (MTK_PIN_NO(199) | 7) + +#define MT2701_PIN_200_SPDIF_OUT__FUNC_GPIO200 (MTK_PIN_NO(200) | 0) +#define MT2701_PIN_200_SPDIF_OUT__FUNC_SPDIF_OUT (MTK_PIN_NO(200) | 1) +#define MT2701_PIN_200_SPDIF_OUT__FUNC_G1_TXD3 (MTK_PIN_NO(200) | 5) +#define MT2701_PIN_200_SPDIF_OUT__FUNC_URXD2 (MTK_PIN_NO(200) | 6) +#define MT2701_PIN_200_SPDIF_OUT__FUNC_DBG_MON_B_16 (MTK_PIN_NO(200) | 7) + +#define MT2701_PIN_201_SPDIF_IN0__FUNC_GPIO201 (MTK_PIN_NO(201) | 0) +#define MT2701_PIN_201_SPDIF_IN0__FUNC_SPDIF_IN0 (MTK_PIN_NO(201) | 1) +#define MT2701_PIN_201_SPDIF_IN0__FUNC_G1_TXEN (MTK_PIN_NO(201) | 5) +#define MT2701_PIN_201_SPDIF_IN0__FUNC_UTXD2 (MTK_PIN_NO(201) | 6) +#define MT2701_PIN_201_SPDIF_IN0__FUNC_DBG_MON_B_17 (MTK_PIN_NO(201) | 7) + +#define MT2701_PIN_202_SPDIF_IN1__FUNC_GPIO202 (MTK_PIN_NO(202) | 0) +#define MT2701_PIN_202_SPDIF_IN1__FUNC_SPDIF_IN1 (MTK_PIN_NO(202) | 1) + +#define MT2701_PIN_203_PWM0__FUNC_GPIO203 (MTK_PIN_NO(203) | 0) +#define MT2701_PIN_203_PWM0__FUNC_PWM0 (MTK_PIN_NO(203) | 1) +#define MT2701_PIN_203_PWM0__FUNC_DISP_PWM (MTK_PIN_NO(203) | 2) +#define MT2701_PIN_203_PWM0__FUNC_G1_TXD2 (MTK_PIN_NO(203) | 5) +#define MT2701_PIN_203_PWM0__FUNC_DBG_MON_B_18 (MTK_PIN_NO(203) | 7) +#define MT2701_PIN_203_PWM0__FUNC_I2S2_DATA (MTK_PIN_NO(203) | 9) + +#define MT2701_PIN_204_PWM1__FUNC_GPIO204 (MTK_PIN_NO(204) | 0) +#define MT2701_PIN_204_PWM1__FUNC_PWM1 (MTK_PIN_NO(204) | 1) +#define MT2701_PIN_204_PWM1__FUNC_CLKM3 (MTK_PIN_NO(204) | 2) +#define MT2701_PIN_204_PWM1__FUNC_G1_TXD1 (MTK_PIN_NO(204) | 5) +#define MT2701_PIN_204_PWM1__FUNC_DBG_MON_B_19 (MTK_PIN_NO(204) | 7) +#define MT2701_PIN_204_PWM1__FUNC_I2S3_DATA (MTK_PIN_NO(204) | 9) + +#define MT2701_PIN_205_PWM2__FUNC_GPIO205 (MTK_PIN_NO(205) | 0) +#define MT2701_PIN_205_PWM2__FUNC_PWM2 (MTK_PIN_NO(205) | 1) +#define MT2701_PIN_205_PWM2__FUNC_CLKM2 (MTK_PIN_NO(205) | 2) +#define MT2701_PIN_205_PWM2__FUNC_G1_TXD0 (MTK_PIN_NO(205) | 5) +#define MT2701_PIN_205_PWM2__FUNC_DBG_MON_B_20 (MTK_PIN_NO(205) | 7) + +#define MT2701_PIN_206_PWM3__FUNC_GPIO206 (MTK_PIN_NO(206) | 0) +#define MT2701_PIN_206_PWM3__FUNC_PWM3 (MTK_PIN_NO(206) | 1) +#define MT2701_PIN_206_PWM3__FUNC_CLKM1 (MTK_PIN_NO(206) | 2) +#define MT2701_PIN_206_PWM3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(206) | 3) +#define MT2701_PIN_206_PWM3__FUNC_G1_TXC (MTK_PIN_NO(206) | 5) +#define MT2701_PIN_206_PWM3__FUNC_DBG_MON_B_21 (MTK_PIN_NO(206) | 7) + +#define MT2701_PIN_207_PWM4__FUNC_GPIO207 (MTK_PIN_NO(207) | 0) +#define MT2701_PIN_207_PWM4__FUNC_PWM4 (MTK_PIN_NO(207) | 1) +#define MT2701_PIN_207_PWM4__FUNC_CLKM0 (MTK_PIN_NO(207) | 2) +#define MT2701_PIN_207_PWM4__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(207) | 3) +#define MT2701_PIN_207_PWM4__FUNC_G1_RXC (MTK_PIN_NO(207) | 5) +#define MT2701_PIN_207_PWM4__FUNC_DBG_MON_B_22 (MTK_PIN_NO(207) | 7) + +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_GPIO208 (MTK_PIN_NO(208) | 0) +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_AUD_EXT_CK1 (MTK_PIN_NO(208) | 1) +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_PWM0 (MTK_PIN_NO(208) | 2) +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_ANT_SEL5 (MTK_PIN_NO(208) | 4) +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_DISP_PWM (MTK_PIN_NO(208) | 5) +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_DBG_MON_A_31 (MTK_PIN_NO(208) | 7) +#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_PCIE0_PERST_N (MTK_PIN_NO(208) | 11) + +#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_GPIO209 (MTK_PIN_NO(209) | 0) +#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_AUD_EXT_CK2 (MTK_PIN_NO(209) | 1) +#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_MSDC1_WP (MTK_PIN_NO(209) | 2) +#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_PWM1 (MTK_PIN_NO(209) | 5) +#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_DBG_MON_A_32 (MTK_PIN_NO(209) | 7) +#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_PCIE1_PERST_N (MTK_PIN_NO(209) | 11) + +#define MT2701_PIN_236_EXT_SDIO3__FUNC_GPIO236 (MTK_PIN_NO(236) | 0) +#define MT2701_PIN_236_EXT_SDIO3__FUNC_EXT_SDIO3 (MTK_PIN_NO(236) | 1) +#define MT2701_PIN_236_EXT_SDIO3__FUNC_IDDIG (MTK_PIN_NO(236) | 2) +#define MT2701_PIN_236_EXT_SDIO3__FUNC_DBG_MON_A_1 (MTK_PIN_NO(236) | 7) + +#define MT2701_PIN_237_EXT_SDIO2__FUNC_GPIO237 (MTK_PIN_NO(237) | 0) +#define MT2701_PIN_237_EXT_SDIO2__FUNC_EXT_SDIO2 (MTK_PIN_NO(237) | 1) +#define MT2701_PIN_237_EXT_SDIO2__FUNC_DRV_VBUS (MTK_PIN_NO(237) | 2) + +#define MT2701_PIN_238_EXT_SDIO1__FUNC_GPIO238 (MTK_PIN_NO(238) | 0) +#define MT2701_PIN_238_EXT_SDIO1__FUNC_EXT_SDIO1 (MTK_PIN_NO(238) | 1) +#define MT2701_PIN_238_EXT_SDIO1__FUNC_IDDIG_P1 (MTK_PIN_NO(238) | 2) + +#define MT2701_PIN_239_EXT_SDIO0__FUNC_GPIO239 (MTK_PIN_NO(239) | 0) +#define MT2701_PIN_239_EXT_SDIO0__FUNC_EXT_SDIO0 (MTK_PIN_NO(239) | 1) +#define MT2701_PIN_239_EXT_SDIO0__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(239) | 2) + +#define MT2701_PIN_240_EXT_XCS__FUNC_GPIO240 (MTK_PIN_NO(240) | 0) +#define MT2701_PIN_240_EXT_XCS__FUNC_EXT_XCS (MTK_PIN_NO(240) | 1) + +#define MT2701_PIN_241_EXT_SCK__FUNC_GPIO241 (MTK_PIN_NO(241) | 0) +#define MT2701_PIN_241_EXT_SCK__FUNC_EXT_SCK (MTK_PIN_NO(241) | 1) + +#define MT2701_PIN_242_URTS2__FUNC_GPIO242 (MTK_PIN_NO(242) | 0) +#define MT2701_PIN_242_URTS2__FUNC_URTS2 (MTK_PIN_NO(242) | 1) +#define MT2701_PIN_242_URTS2__FUNC_UTXD3 (MTK_PIN_NO(242) | 2) +#define MT2701_PIN_242_URTS2__FUNC_URXD3 (MTK_PIN_NO(242) | 3) +#define MT2701_PIN_242_URTS2__FUNC_SCL1 (MTK_PIN_NO(242) | 4) +#define MT2701_PIN_242_URTS2__FUNC_DBG_MON_B_32 (MTK_PIN_NO(242) | 7) + +#define MT2701_PIN_243_UCTS2__FUNC_GPIO243 (MTK_PIN_NO(243) | 0) +#define MT2701_PIN_243_UCTS2__FUNC_UCTS2 (MTK_PIN_NO(243) | 1) +#define MT2701_PIN_243_UCTS2__FUNC_URXD3 (MTK_PIN_NO(243) | 2) +#define MT2701_PIN_243_UCTS2__FUNC_UTXD3 (MTK_PIN_NO(243) | 3) +#define MT2701_PIN_243_UCTS2__FUNC_SDA1 (MTK_PIN_NO(243) | 4) +#define MT2701_PIN_243_UCTS2__FUNC_DBG_MON_A_6 (MTK_PIN_NO(243) | 7) + +#define MT2701_PIN_244_HDMI_SDA_RX__FUNC_GPIO244 (MTK_PIN_NO(244) | 0) +#define MT2701_PIN_244_HDMI_SDA_RX__FUNC_HDMI_SDA_RX (MTK_PIN_NO(244) | 1) + +#define MT2701_PIN_245_HDMI_SCL_RX__FUNC_GPIO245 (MTK_PIN_NO(245) | 0) +#define MT2701_PIN_245_HDMI_SCL_RX__FUNC_HDMI_SCL_RX (MTK_PIN_NO(245) | 1) + +#define MT2701_PIN_246_MHL_SENCE__FUNC_GPIO246 (MTK_PIN_NO(246) | 0) + +#define MT2701_PIN_247_HDMI_HPD_CBUS_RX__FUNC_GPIO247 (MTK_PIN_NO(247) | 0) +#define MT2701_PIN_247_HDMI_HPD_CBUS_RX__FUNC_HDMI_HPD_RX (MTK_PIN_NO(247) | 1) + +#define MT2701_PIN_248_HDMI_TESTOUTP_RX__FUNC_GPIO248 (MTK_PIN_NO(248) | 0) +#define MT2701_PIN_248_HDMI_TESTOUTP_RX__FUNC_HDMI_TESTOUTP_RX (MTK_PIN_NO(248) | 1) + +#define MT2701_PIN_249_MSDC0E_RSTB__FUNC_MSDC0E_RSTB (MTK_PIN_NO(249) | 9) + +#define MT2701_PIN_250_MSDC0E_DAT7__FUNC_MSDC3_DAT7 (MTK_PIN_NO(250) | 9) +#define MT2701_PIN_250_MSDC0E_DAT7__FUNC_PCIE0_CLKREQ_N (MTK_PIN_NO(250) | 14) + +#define MT2701_PIN_251_MSDC0E_DAT6__FUNC_MSDC3_DAT6 (MTK_PIN_NO(251) | 9) +#define MT2701_PIN_251_MSDC0E_DAT6__FUNC_PCIE0_WAKE_N (MTK_PIN_NO(251) | 14) + +#define MT2701_PIN_252_MSDC0E_DAT5__FUNC_MSDC3_DAT5 (MTK_PIN_NO(252) | 9) +#define MT2701_PIN_252_MSDC0E_DAT5__FUNC_PCIE1_CLKREQ_N (MTK_PIN_NO(252) | 14) + +#define MT2701_PIN_253_MSDC0E_DAT4__FUNC_MSDC3_DAT4 (MTK_PIN_NO(253) | 9) +#define MT2701_PIN_253_MSDC0E_DAT4__FUNC_PCIE1_WAKE_N (MTK_PIN_NO(253) | 14) + +#define MT2701_PIN_254_MSDC0E_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(254) | 9) +#define MT2701_PIN_254_MSDC0E_DAT3__FUNC_PCIE2_CLKREQ_N (MTK_PIN_NO(254) | 14) + +#define MT2701_PIN_255_MSDC0E_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(255) | 9) +#define MT2701_PIN_255_MSDC0E_DAT2__FUNC_PCIE2_WAKE_N (MTK_PIN_NO(255) | 14) + +#define MT2701_PIN_256_MSDC0E_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(256) | 9) + +#define MT2701_PIN_257_MSDC0E_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(257) | 9) + +#define MT2701_PIN_258_MSDC0E_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(258) | 9) + +#define MT2701_PIN_259_MSDC0E_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(259) | 9) + +#define MT2701_PIN_260_MSDC0E_DSL__FUNC_MSDC3_DSL (MTK_PIN_NO(260) | 9) + +#define MT2701_PIN_261_MSDC1_INS__FUNC_GPIO261 (MTK_PIN_NO(261) | 0) +#define MT2701_PIN_261_MSDC1_INS__FUNC_MSDC1_INS (MTK_PIN_NO(261) | 1) +#define MT2701_PIN_261_MSDC1_INS__FUNC_DBG_MON_B_29 (MTK_PIN_NO(261) | 7) + +#define MT2701_PIN_262_G2_TXEN__FUNC_GPIO262 (MTK_PIN_NO(262) | 0) +#define MT2701_PIN_262_G2_TXEN__FUNC_G2_TXEN (MTK_PIN_NO(262) | 1) + +#define MT2701_PIN_263_G2_TXD3__FUNC_GPIO263 (MTK_PIN_NO(263) | 0) +#define MT2701_PIN_263_G2_TXD3__FUNC_G2_TXD3 (MTK_PIN_NO(263) | 1) +#define MT2701_PIN_263_G2_TXD3__FUNC_ANT_SEL5 (MTK_PIN_NO(263) | 6) + +#define MT2701_PIN_264_G2_TXD2__FUNC_GPIO264 (MTK_PIN_NO(264) | 0) +#define MT2701_PIN_264_G2_TXD2__FUNC_G2_TXD2 (MTK_PIN_NO(264) | 1) +#define MT2701_PIN_264_G2_TXD2__FUNC_ANT_SEL4 (MTK_PIN_NO(264) | 6) + +#define MT2701_PIN_265_G2_TXD1__FUNC_GPIO265 (MTK_PIN_NO(265) | 0) +#define MT2701_PIN_265_G2_TXD1__FUNC_G2_TXD1 (MTK_PIN_NO(265) | 1) +#define MT2701_PIN_265_G2_TXD1__FUNC_ANT_SEL3 (MTK_PIN_NO(265) | 6) + +#define MT2701_PIN_266_G2_TXD0__FUNC_GPIO266 (MTK_PIN_NO(266) | 0) +#define MT2701_PIN_266_G2_TXD0__FUNC_G2_TXD0 (MTK_PIN_NO(266) | 1) +#define MT2701_PIN_266_G2_TXD0__FUNC_ANT_SEL2 (MTK_PIN_NO(266) | 6) + +#define MT2701_PIN_267_G2_TXC__FUNC_GPIO267 (MTK_PIN_NO(267) | 0) +#define MT2701_PIN_267_G2_TXC__FUNC_G2_TXC (MTK_PIN_NO(267) | 1) + +#define MT2701_PIN_268_G2_RXC__FUNC_GPIO268 (MTK_PIN_NO(268) | 0) +#define MT2701_PIN_268_G2_RXC__FUNC_G2_RXC (MTK_PIN_NO(268) | 1) + +#define MT2701_PIN_269_G2_RXD0__FUNC_GPIO269 (MTK_PIN_NO(269) | 0) +#define MT2701_PIN_269_G2_RXD0__FUNC_G2_RXD0 (MTK_PIN_NO(269) | 1) + +#define MT2701_PIN_270_G2_RXD1__FUNC_GPIO270 (MTK_PIN_NO(270) | 0) +#define MT2701_PIN_270_G2_RXD1__FUNC_G2_RXD1 (MTK_PIN_NO(270) | 1) + +#define MT2701_PIN_271_G2_RXD2__FUNC_GPIO271 (MTK_PIN_NO(271) | 0) +#define MT2701_PIN_271_G2_RXD2__FUNC_G2_RXD2 (MTK_PIN_NO(271) | 1) + +#define MT2701_PIN_272_G2_RXD3__FUNC_GPIO272 (MTK_PIN_NO(272) | 0) +#define MT2701_PIN_272_G2_RXD3__FUNC_G2_RXD3 (MTK_PIN_NO(272) | 1) + +#define MT2701_PIN_274_G2_RXDV__FUNC_GPIO274 (MTK_PIN_NO(274) | 0) +#define MT2701_PIN_274_G2_RXDV__FUNC_G2_RXDV (MTK_PIN_NO(274) | 1) + +#define MT2701_PIN_275_MDC__FUNC_GPIO275 (MTK_PIN_NO(275) | 0) +#define MT2701_PIN_275_MDC__FUNC_MDC (MTK_PIN_NO(275) | 1) +#define MT2701_PIN_275_MDC__FUNC_ANT_SEL0 (MTK_PIN_NO(275) | 6) + +#define MT2701_PIN_276_MDIO__FUNC_GPIO276 (MTK_PIN_NO(276) | 0) +#define MT2701_PIN_276_MDIO__FUNC_MDIO (MTK_PIN_NO(276) | 1) +#define MT2701_PIN_276_MDIO__FUNC_ANT_SEL1 (MTK_PIN_NO(276) | 6) + +#define MT2701_PIN_278_JTAG_RESET__FUNC_GPIO278 (MTK_PIN_NO(278) | 0) +#define MT2701_PIN_278_JTAG_RESET__FUNC_JTAG_RESET (MTK_PIN_NO(278) | 1) + +#endif /* __DTS_MT2701_PINFUNC_H */ diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 3766904b60f3..83437683aa60 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -23,6 +23,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "mediatek,mt81xx-tz-smp"; cpu@0 { device_type = "cpu"; @@ -46,6 +47,17 @@ }; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + trustzone-bootinfo@80002000 { + compatible = "mediatek,trustzone-bootinfo"; + reg = <0 0x80002000 0 0x1000>; + }; + }; + system_clk: dummy13m { compatible = "fixed-clock"; clock-frequency = <13000000>; diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts new file mode 100644 index 000000000000..a9ee2d64c6f7 --- /dev/null +++ b/arch/arm/boot/dts/mt7623-evb.dts @@ -0,0 +1,33 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: John Crispin <blogic@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "mt7623.dtsi" + +/ { + model = "MediaTek MT7623 evaluation board"; + compatible = "mediatek,mt7623-evb", "mediatek,mt7623"; + + chosen { + stdout-path = &uart2; + }; + + memory { + reg = <0 0x80000000 0 0x40000000>; + }; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi new file mode 100644 index 000000000000..fd2b614ae6f3 --- /dev/null +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -0,0 +1,147 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: John Crispin <blogic@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "skeleton64.dtsi" + +/ { + compatible = "mediatek,mt7623"; + interrupt-parent = <&sysirq>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "mediatek,mt6589-smp"; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + }; + }; + + system_clk: dummy13m { + compatible = "fixed-clock"; + clock-frequency = <13000000>; + #clock-cells = <0>; + }; + + rtc_clk: dummy32k { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + + uart_clk: dummy26m { + compatible = "fixed-clock"; + clock-frequency = <26000000>; + #clock-cells = <0>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + watchdog: watchdog@10007000 { + compatible = "mediatek,mt7623-wdt", + "mediatek,mt6589-wdt"; + reg = <0 0x10007000 0 0x100>; + }; + + timer: timer@10008000 { + compatible = "mediatek,mt7623-timer", + "mediatek,mt6577-timer"; + reg = <0 0x10008000 0 0x80>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>; + clocks = <&system_clk>, <&rtc_clk>; + clock-names = "system-clk", "rtc-clk"; + }; + + sysirq: interrupt-controller@10200100 { + compatible = "mediatek,mt7623-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10200100 0 0x1c>; + }; + + gic: interrupt-controller@10211000 { + compatible = "arm,cortex-a7-gic"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10211000 0 0x1000>, + <0 0x10212000 0 0x1000>, + <0 0x10214000 0 0x2000>, + <0 0x10216000 0 0x2000>; + }; + + uart0: serial@11002000 { + compatible = "mediatek,mt7623-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11002000 0 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt7623-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x400>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart2: serial@11004000 { + compatible = "mediatek,mt7623-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11004000 0 0x400>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart3: serial@11005000 { + compatible = "mediatek,mt7623-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11005000 0 0x400>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi b/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi new file mode 100644 index 000000000000..e211a3c47a76 --- /dev/null +++ b/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi @@ -0,0 +1,72 @@ +/* + * Device Tree common file for gpio-fan on Buffalo Linkstation + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + gpio_fan { + compatible = "gpio-fan"; + pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; + pinctrl-names = "default"; + + gpio-fan,speed-map = + <0 3 + 1500 2 + 3250 1 + 5000 0>; + }; +}; + +&pinctrl { + pmx_fan_low: pmx-fan-low { + marvell,function = "gpio"; + }; + + pmx_fan_high: pmx-fan-high { + marvell,function = "gpio"; + }; + + pmx_fan_lock: pmx-fan-lock { + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi b/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi new file mode 100644 index 000000000000..68d75e79a360 --- /dev/null +++ b/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi @@ -0,0 +1,105 @@ +/* + * Device Tree common file for gpio-{keys,leds} on Buffalo Linkstation + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/input/input.h> + +/ { + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_power_switch>; + pinctrl-names = "default"; + + power-on-switch { + label = "Power-on Switch"; + linux,code = <KEY_RESERVED>; + linux,input-type = <5>; + }; + + power-auto-switch { + label = "Power-auto Switch"; + linux,code = <KEY_ESC>; + linux,input-type = <5>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_power &pmx_led_alarm &pmx_led_info>; + pinctrl-names = "default"; + + blue-power-led { + label = "linkstation:blue:power"; + default-state = "keep"; + }; + + red-alarm-led { + label = "linkstation:red:alarm"; + }; + + amber-info-led { + label = "linkstation:amber:info"; + }; + }; +}; + +&pinctrl { + pmx_power_switch: pmx-power-switch { + marvell,function = "gpio"; + }; + + pmx_led_power: pmx-leds { + marvell,function = "gpio"; + }; + + pmx_led_alarm: pmx-leds { + marvell,function = "gpio"; + }; + + pmx_led_info: pmx-leds { + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 8ba465d57635..4602866792be 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -384,8 +384,11 @@ /* Chip select 0 */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* NAND I/O window, 4 bytes */ - interrupts = <20>; + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "ham1"; nand-bus-width = <16>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index e5f7f5c92c1a..a8127bc31fd9 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -261,10 +261,14 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x01000000>; + ranges = <0 0 0x30000000 0x01000000>; /* CS0: 16MB for NAND */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <8>; gpmc,device-width = <1>; ti,nand-ecc-opt = "sw"; diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi index 86850bb311eb..b1b8ebf90c1c 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi @@ -204,7 +204,11 @@ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "sw"; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index ac188657a95d..76056ba92ced 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -154,12 +154,16 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x1000000>, /* CS0: 16MB for NAND */ + ranges = <0 0 0x30000000 0x1000000>, /* CS0: 16MB for NAND */ <5 0 0x2c000000 0x01000000>; nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ linux,mtd-name= "hynix,h8kds0un0mer-4em"; - reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 5e2d6433d939..ab9fb8f49ff3 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -492,7 +492,11 @@ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 3caf062f882c..41f5d386f21f 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -18,6 +18,10 @@ reg = <0x80000000 0x20000000>; /* 512 MB */ }; + chosen { + stdout-path = &uart3; + }; + sound { compatible = "ti,omap-twl4030"; ti,model = "igep2"; @@ -95,8 +99,12 @@ &gpmc { nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ linux,mtd-name= "micron,mt29c4g96maz"; - reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index d90f12c39307..d6f839cab649 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -210,8 +210,8 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x20000000>, - <5 0 0x2c000000 0x01000000>; + ranges = <0 0 0x30000000 0x01000000>, /* CS0: 16MB for NAND */ + <5 0 0x2c000000 0x01000000>; /* CS5: 16MB for ethernet */ ethernet@gpmc { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/omap3-igep0030-common.dtsi b/arch/arm/boot/dts/omap3-igep0030-common.dtsi index 640f06603966..e94d9427450c 100644 --- a/arch/arm/boot/dts/omap3-igep0030-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0030-common.dtsi @@ -33,9 +33,28 @@ default-state = "off"; }; }; + + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */ + }; }; &omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_pins>; + + hsusb2_pins: pinmux_hsusb2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ + OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ + OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ + >; + }; + uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1) /* mcbsp3_dx.uart2_cts */ @@ -47,6 +66,20 @@ }; &omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_core2_pins>; + + hsusb2_core2_pins: pinmux_hsusb2_core2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; + leds_core2_pins: pinmux_leds_core2_pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */ @@ -54,7 +87,19 @@ }; }; +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; + &uart2 { pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; }; + +&gpmc { + ranges = <0 0 0x30000000 0x01000000>; /* CS0: 16MB for NAND */ +}; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index 540163025dd3..2f353dadfa40 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -97,12 +97,16 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x01000000>, - <1 0 0x08000000 0x01000000>; + ranges = <0 0 0x30000000 0x1000000>, /* CS0 space, 16MB */ + <1 0 0x08000000 0x1000000>; /* CS1 space, 16MB */ nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ linux,mtd-name= "micron,nand"; - reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index 93f8dfe20f13..eff816e0bc0a 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -362,7 +362,11 @@ <7 0 0x15000000 0x01000000>; nand@0,0 { - reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; /* no elm on omap3 */ diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index f2e213931e09..5c67429a4da7 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -53,3 +53,7 @@ }; }; }; + +&modem { + compatible = "nokia,n9-modem"; +}; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 74d8f7eb5563..b3c26a96a726 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -65,50 +65,51 @@ camera_lens_cover { label = "Camera Lens Cover"; gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */ - linux,input-type = <5>; /* EV_SW */ - linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */ - wakeup-source; + linux,input-type = <EV_SW>; + linux,code = <SW_CAMERA_LENS_COVER>; + linux,can-disable; }; camera_focus { label = "Camera Focus"; gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */ - linux,code = <0x210>; /* KEY_CAMERA_FOCUS */ - wakeup-source; + linux,code = <KEY_CAMERA_FOCUS>; + linux,can-disable; }; camera_capture { label = "Camera Capture"; gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */ - linux,code = <0xd4>; /* KEY_CAMERA */ - wakeup-source; + linux,code = <KEY_CAMERA>; + linux,can-disable; }; lock_button { label = "Lock Button"; gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */ - linux,code = <0x98>; /* KEY_SCREENLOCK */ - wakeup-source; + linux,code = <KEY_SCREENLOCK>; + linux,can-disable; }; keypad_slide { label = "Keypad Slide"; gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */ - linux,input-type = <5>; /* EV_SW */ - linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */ - wakeup-source; + linux,input-type = <EV_SW>; + linux,code = <SW_KEYPAD_SLIDE>; + linux,can-disable; }; proximity_sensor { label = "Proximity Sensor"; gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */ - linux,input-type = <5>; /* EV_SW */ - linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */ + linux,input-type = <EV_SW>; + linux,code = <SW_FRONT_PROXIMITY>; + linux,can-disable; }; }; - isp1704: isp1704 { - compatible = "nxp,isp1704"; + isp1707: isp1707 { + compatible = "nxp,isp1707"; nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>; usb-phy = <&usb2_phy>; }; @@ -522,6 +523,21 @@ amstaos,cover-comp-gain = <16>; }; + adp1653: led-controller@30 { + compatible = "adi,adp1653"; + reg = <0x30>; + enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ + + flash { + flash-timeout-us = <500000>; + flash-max-microamp = <320000>; + led-max-microamp = <50000>; + }; + indicator { + led-max-microamp = <17500>; + }; + }; + lp5523: lp5523@32 { compatible = "national,lp5523"; reg = <0x32>; @@ -618,7 +634,7 @@ ti,termination-current = <100>; ti,resistor-sense = <68>; - ti,usb-charger-detection = <&isp1704>; + ti,usb-charger-detection = <&isp1707>; }; }; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index a2c2b8d8dd2c..858a25048102 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -31,6 +31,14 @@ startup-delay-us = <150>; enable-active-high; }; + + vwlan_fixed: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "VWLAN"; + gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */ + enable-active-high; + regulator-boot-off; + }; }; &omap3_pmx_core { @@ -44,6 +52,55 @@ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ >; }; + + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE4) /* gpio 35 - wlan enable */ + OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 - wlan irq */ + >; + }; + + ssi_pins: pinmux_ssi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ + OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ + OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ + OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ + OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ + OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */ + OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */ + >; + }; + + ssi_pins_idle: pinmux_ssi_pins_idle { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE7) /* ssi1_dat_tx */ + OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE7) /* ssi1_flag_tx */ + OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLDOWN | MUX_MODE7) /* ssi1_rdy_tx */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ + OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE7) /* ssi1_dat_rx */ + OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE7) /* ssi1_flag_rx */ + OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4) /* ssi1_rdy_rx */ + OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE7) /* ssi1_wake */ + >; + }; + + modem_pins1: pinmux_modem_core1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio_34 (ape_rst_rq) */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE4) /* gpio_88 (cmt_rst_rq) */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4) /* gpio_93 (cmt_apeslpx) */ + >; + }; +}; + +&omap3_pmx_core2 { + modem_pins2: pinmux_modem_core2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* gpio_23 (cmt_en) */ + >; + }; }; &i2c1 { @@ -191,3 +248,39 @@ }; }; }; + +&ssi_port1 { + pinctrl-names = "default", "idle"; + pinctrl-0 = <&ssi_pins>; + pinctrl-1 = <&ssi_pins_idle>; + + ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */ + + modem: hsi-client { + pinctrl-names = "default"; + pinctrl-0 = <&modem_pins1 &modem_pins2>; + + hsi-channel-ids = <0>, <1>, <2>, <3>; + hsi-channel-names = "mcsaab-control", + "speech-control", + "speech-data", + "mcsaab-data"; + hsi-speed-kbps = <96000>; + hsi-mode = "frame"; + hsi-flow = "synchronized"; + hsi-arb-mode = "round-robin"; + + interrupts-extended = <&gpio2 2 IRQ_TYPE_EDGE_RISING>; /* gpio 34 */ + + gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>, /* gpio 93 */ + <&gpio3 24 GPIO_ACTIVE_HIGH>, /* gpio 88 */ + <&gpio1 23 GPIO_ACTIVE_HIGH>; /* gpio 23 */ + gpio-names = "cmt_apeslpx", + "cmt_rst_rq", + "cmt_en"; + }; +}; + +&ssi_port2 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index 0885b34d5d7d..7f219a9dc5be 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -17,6 +17,17 @@ compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3"; }; +&omap3_pmx_core { + spi4_pins: pinmux_spi4_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */ + OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */ + OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */ + OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */ + >; + }; +}; + &i2c2 { smia_1: camera@10 { compatible = "nokia,smia"; @@ -53,3 +64,25 @@ }; }; }; + +&mcspi4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi4_pins>; + + wlcore: wlcore@0 { + compatible = "ti,wl1271"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_pins>; + reg = <0>; + spi-max-frequency = <48000000>; + clock-xtal; + ref-clock-frequency = <38400000>; + interrupts-extended = <&gpio2 10 IRQ_TYPE_LEVEL_HIGH>; /* gpio 42 */ + vwlan-supply = <&vwlan_fixed>; + }; +}; + +&modem { + compatible = "nokia,n950-modem"; +}; diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index a29ad16cc9bb..de256fa8da48 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -226,8 +226,12 @@ ranges = <0 0 0x00000000 0x20000000>; nand@0,0 { + compatible = "ti,omap2-nand"; linux,mtd-name= "micron,mt29c4g96maz"; - reg = <0 0 0>; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index 13e9d1f987af..bcf39d606b65 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -546,7 +546,11 @@ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <16>; ti,nand-ecc-opt = "sw"; diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts new file mode 100644 index 000000000000..78a1184cb312 --- /dev/null +++ b/arch/arm/boot/dts/omap3-sniper.dts @@ -0,0 +1,254 @@ +/* + * Copyright (C) 2015-2016 Paul Kocialkowski <contact@paulk.fr> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap36xx.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "LG Optimus Black"; + compatible = "lg,omap3-sniper", "ti,omap36xx", "ti,omap3"; + + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; +}; + +&omap3_pmx_core { + pinctrl-names = "default"; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx */ + >; + }; + + dp3t_sel_pins: pinmux_dp3t_sel_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE4) /* gpio_161 */ + OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* gpio_162 */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl */ + OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ + OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ + >; + }; + + lp8720_en_pin: pinmux_lp8720_en_pin { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2080, PIN_OUTPUT | MUX_MODE4) /* gpio_37 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT | MUX_MODE0) /* sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT | MUX_MODE0) /* sdmmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT | MUX_MODE0) /* sdmmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat3 */ + OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat4 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat5 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat6 */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat7 */ + >; + }; + + usb_otg_hs_pins: pinmux_usb_otg_hs_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk */ + OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp */ + OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir */ + OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt */ + OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0 */ + OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1 */ + OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2 */ + OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3 */ + OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4 */ + OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5 */ + OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6 */ + OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7 */ + >; + }; +}; + +&omap3_pmx_wkup { + pinctrl-names = "default"; + + mmc1_cd_pin: pinmux_mmc1_cd_pin { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | MUX_MODE4) /* gpio_10 */ + >; + }; +}; + +&gpio2 { + ti,no-reset-on-init; +}; + +&gpio5 { + ti,no-reset-on-init; +}; + +&gpio6 { + ti,no-reset-on-init; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins &dp3t_sel_pins>; + + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + power { + compatible = "ti,twl4030-power"; + ti,use_poweroff; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + clock-frequency = <400000>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + + clock-frequency = <400000>; + + lp8720@7d { + pinctrl-names = "default"; + pinctrl-0 = <&lp8720_en_pin>; + + compatible = "ti,lp8720"; + reg = <0x7d>; + + enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* gpio_37 */ + + lp8720_ldo1: ldo1 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + }; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins &mmc1_cd_pin>; + + vmmc-supply = <&lp8720_ldo1>; + cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* gpio 10 */ + bus-width = <4>; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + + vmmc-supply = <&vmmc2>; + ti,non-removable; + bus-width = <8>; +}; + +&mmc3 { + status = "disabled"; +}; + +&usb_otg_hs { + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg_hs_pins>; + + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&twl_keypad { + linux,keymap = < + MATRIX_KEY(0x00, 0x00, KEY_VOLUMEUP) + MATRIX_KEY(0x01, 0x00, KEY_VOLUMEDOWN) + MATRIX_KEY(0x02, 0x00, KEY_SELECT) + >; +}; + +/* + * The TWL4030 VAUX2 and VDAC regulators power sensors that are slaves on I2C3. + * When not powered, these sensors cause the I2C3 clock to stay low at all times, + * making it impossible to reach other devices on I2C3. + */ + +&vaux2 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; +}; + +&vdac { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index ae5dbbd9d569..644d3c8ea66a 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -275,10 +275,14 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x01000000>; + ranges = <0 0 0x30000000 0x01000000>; /* CS0: 16MB for NAND */ nand@0,0 { + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ nand-bus-width = <16>; gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */ ti,nand-ecc-opt = "sw"; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index d1ffabb7c74f..b41d07e8e765 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -723,6 +723,8 @@ gpmc,num-waitpins = <4>; #address-cells = <2>; #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; }; usb_otg_hs: usb_otg_hs@480ab000 { diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index 16b0cdfbee9c..a0dc8d854142 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -103,10 +103,14 @@ }; nand@1,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ linux,mtd-name= "micron,mt29f1g08abb"; #address-cells = <1>; #size-cells = <1>; - reg = <1 0 4>; /* CS1, offset 0, IO size 4 */ ti,nand-ecc-opt = "sw"; nand-bus-width = <8>; gpmc,cs-on-ns = <0>; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index 4f6b2d5b1902..387dc31822fe 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -54,6 +54,12 @@ #size-cells = <0>; }; }; + + bandgap { + reg = <0x48002524 0x4>; + compatible = "ti,omap34xx-bandgap"; + #thermal-sensor-cells = <0>; + }; }; }; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 86253de5a97a..f19c87bd6bf3 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -86,6 +86,12 @@ #size-cells = <0>; }; }; + + bandgap { + reg = <0x48002524 0x4>; + compatible = "ti,omap36xx-bandgap"; + #thermal-sensor-cells = <0>; + }; }; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index ca3c17fde5a0..38805ebbe2ba 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -852,18 +852,6 @@ hw-caps-temp-alert; }; - omap_control_usb2phy: control-phy@4a002300 { - compatible = "ti,control-phy-usb2"; - reg = <0x4a002300 0x4>; - reg-names = "power"; - }; - - omap_control_usb3phy: control-phy@4a002370 { - compatible = "ti,control-phy-pipe3"; - reg = <0x4a002370 0x4>; - reg-names = "power"; - }; - usb3: omap_dwc3@4a020000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss"; @@ -885,7 +873,6 @@ phys = <&usb2_phy>, <&usb3_phy>; phy-names = "usb2-phy", "usb3-phy"; dr_mode = "peripheral"; - tx-fifo-resize; }; }; @@ -899,7 +886,7 @@ usb2_phy: usb2phy@4a084000 { compatible = "ti,omap-usb2"; reg = <0x4a084000 0x7c>; - ctrl-module = <&omap_control_usb2phy>; + syscon-phy-power = <&scm_conf 0x300>; clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>; clock-names = "wkupclk", "refclk"; #phy-cells = <0>; @@ -911,7 +898,7 @@ <0x4a084800 0x64>, <0x4a084c00 0x40>; reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - ctrl-module = <&omap_control_usb3phy>; + syscon-phy-power = <&scm_conf 0x370>; clocks = <&usb_phy_cm_clk32k>, <&sys_clkin>, <&usb_otg_ss_refclk960m>; @@ -967,14 +954,6 @@ #thermal-sensor-cells = <1>; }; - omap_control_sata: control-phy@4a002374 { - compatible = "ti,control-phy-pipe3"; - reg = <0x4a002374 0x4>; - reg-names = "power"; - clocks = <&sys_clkin>; - clock-names = "sysclk"; - }; - /* OCP2SCP3 */ ocp2scp@4a090000 { compatible = "ti,omap-ocp2scp"; @@ -989,7 +968,7 @@ <0x4A096400 0x64>, /* phy_tx */ <0x4A096800 0x40>; /* pll_ctrl */ reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - ctrl-module = <&omap_control_sata>; + syscon-phy-power = <&scm_conf 0x374>; clocks = <&sys_clkin>, <&sata_ref_clk>; clock-names = "sysclk", "refclk"; #phy-cells = <0>; diff --git a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts new file mode 100644 index 000000000000..1cf644bfd7ea --- /dev/null +++ b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts @@ -0,0 +1,87 @@ +/* + * Device Tree file for Buffalo Linkstation LS-GL + * (also known as Buffalo Linkstation Pro/Live) + * + * Copyright (C) 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * Based on the board file arch/arm/mach-orion5x/kurobox_pro-setup.c + * Copyright (C) Ronen Shitrit <rshitrit@marvell.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "orion5x-linkstation.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Buffalo Linkstation Pro/Live"; + compatible = "buffalo,lsgl", "marvell,orion5x-88f5182", "marvell,orion5x"; + + memory { /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; +}; + +&pinctrl { + pmx_power_hdd: pmx-power-hdd { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + + pmx_power_usb: pmx-power-usb { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; +}; + +&hdd_power { + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; +}; + +&usb_power { + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; +}; + +&ehci1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts index aae8a7aceab7..0eead400f427 100644 --- a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts @@ -45,9 +45,10 @@ /dts-v1/; +#include "orion5x-linkstation.dtsi" +#include "mvebu-linkstation-gpio-simple.dtsi" +#include "mvebu-linkstation-fan.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include "orion5x-mv88f5182.dtsi" / { model = "Buffalo Linkstation LS-WTGL"; @@ -58,247 +59,93 @@ reg = <0x00000000 0x4000000>; }; - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - linux,stdout-path = &uart0; - }; - - soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, - <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, - <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>; - - internal-regs { - pinctrl: pinctrl@10000 { - pinctrl-names = "default"; - - pmx_led_power: pmx-leds { - marvell,pins = "mpp0"; - marvell,function = "gpio"; - }; - - pmx_led_alarm: pmx-leds { - marvell,pins = "mpp2"; - marvell,function = "gpio"; - }; - - pmx_led_info: pmx-leds { - marvell,pins = "mpp3"; - marvell,function = "gpio"; - }; - - pmx_power_hdd: pmx-power-hdd { - marvell,pins = "mpp1"; - marvell,function = "gpio"; - }; - - pmx_usb_power: pmx-usb-power { - marvell,pins = "mpp9"; - marvell,function = "gpio"; - }; - - pmx_sata0: pmx-sata0 { - marvell,pins = "mpp12"; - marvell,function = "sata0"; - }; - - pmx_sata1: pmx-sata1 { - marvell,pins = "mpp13"; - marvell,function = "sata1"; - }; - - pmx_fan_high: pmx-fan-high { - marvell,pins = "mpp14"; - marvell,function = "gpio"; - }; - - pmx_fan_low: pmx-fan-low { - marvell,pins = "mpp17"; - marvell,function = "gpio"; - }; - - pmx_fan_lock: pmx-fan-lock { - marvell,pins = "mpp6"; - marvell,function = "gpio"; - }; - - pmx_power_switch: pmx-power-switch { - marvell,pins = "mpp8", "mpp10"; - marvell,function = "gpio"; - }; - }; - }; - }; - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_switch>; - pinctrl-names = "default"; - - button@1 { - label = "Power-on Switch"; - linux,code = <KEY_RESERVED>; - linux,input-type = <5>; + power-on-switch { gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; }; - button@2 { - label = "Power-auto Switch"; - linux,code = <KEY_ESC>; - linux,input-type = <5>; + power-auto-switch { gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; }; }; gpio_leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_power &pmx_led_alarm - &pmx_led_info>; - pinctrl-names = "default"; - - led@1 { - label = "lswtgl:blue:power"; + blue-power-led { gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; - default-state = "keep"; }; - led@2 { - label = "lswtgl:red:alarm"; + red-alarm-led { gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; }; - led@3 { - label = "lswtgl:amber:info"; + amber-info-led { gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; }; }; gpio_fan { - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; - pinctrl-names = "default"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW &gpio0 17 GPIO_ACTIVE_LOW>; - gpio-fan,speed-map = <0 3 - 1500 2 - 3250 1 - 5000 0>; - alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; +}; - restart_poweroff { - compatible = "restart-poweroff"; +&pinctrl { + pmx_led_power: pmx-leds { + marvell,pins = "mpp0"; + marvell,function = "gpio"; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_hdd &pmx_usb_power>; - pinctrl-names = "default"; - - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; - }; - - hdd_power: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "HDD Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; - }; + pmx_power_hdd: pmx-power-hdd { + marvell,pins = "mpp1"; + marvell,function = "gpio"; }; -}; - -&devbus_bootcs { - status = "okay"; - devbus,keep-config; - flash@0 { - compatible = "jedec-flash"; - reg = <0 0x40000>; - bank-width = <1>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - header@0 { - reg = <0 0x30000>; - read-only; - }; - - uboot@30000 { - reg = <0x30000 0xF000>; - read-only; - }; + pmx_led_alarm: pmx-leds { + marvell,pins = "mpp2"; + marvell,function = "gpio"; + }; - uboot_env@3F000 { - reg = <0x3F000 0x1000>; - }; - }; + pmx_led_info: pmx-leds { + marvell,pins = "mpp3"; + marvell,function = "gpio"; }; -}; -&mdio { - status = "okay"; + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp6"; + marvell,function = "gpio"; + }; - ethphy: ethernet-phy { - reg = <8>; + pmx_power_switch: pmx-power-switch { + marvell,pins = "mpp8", "mpp10"; + marvell,function = "gpio"; }; -}; -ð { - status = "okay"; + pmx_power_usb: pmx-power-usb { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; - ethernet-port@0 { - phy-handle = <ðphy>; + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp14"; + marvell,function = "gpio"; }; -}; -&ehci0 { - status = "okay"; + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; }; -&i2c { - status = "okay"; - - rtc { - compatible = "ricoh,rs5c372a"; - reg = <0x32>; - }; +&hdd_power { + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; }; -&wdt { - status = "disabled"; +&usb_power { + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; }; &sata { - pinctrl-0 = <&pmx_sata0 &pmx_sata1>; - pinctrl-names = "default"; - status = "okay"; nr-ports = <2>; }; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/orion5x-linkstation.dtsi b/arch/arm/boot/dts/orion5x-linkstation.dtsi new file mode 100644 index 000000000000..ed456ab35fd8 --- /dev/null +++ b/arch/arm/boot/dts/orion5x-linkstation.dtsi @@ -0,0 +1,180 @@ +/* + * Device Tree common file for orion5x based Buffalo Linkstation + * + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "orion5x-mv88f5182.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>; + }; + + restart_poweroff { + compatible = "restart-poweroff"; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_power_usb &pmx_power_hdd>; + pinctrl-names = "default"; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + }; + + hdd_power: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "HDD Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + }; + }; +}; + +&pinctrl { + pmx_power_hdd: pmx-power-hdd { + marvell,function = "gpio"; + }; + + pmx_power_usb: pmx-power-usb { + marvell,function = "gpio"; + }; +}; + +&devbus_bootcs { + status = "okay"; + devbus,keep-config; + + flash@0 { + compatible = "jedec-flash"; + reg = <0 0x40000>; + bank-width = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + header@0 { + reg = <0 0x30000>; + read-only; + }; + + uboot@30000 { + reg = <0x30000 0xF000>; + read-only; + }; + + uboot_env@3F000 { + reg = <0x3F000 0x1000>; + }; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c { + status = "okay"; + + rtc { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + }; +}; + +&wdt { + status = "disabled"; +}; + +&sata { + status = "okay"; + nr-ports = <1>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts index 7d253bb6265a..a00d7ce7802b 100644 --- a/arch/arm/boot/dts/phy3250.dts +++ b/arch/arm/boot/dts/phy3250.dts @@ -25,6 +25,37 @@ reg = <0x80000000 0x4000000>; }; + regulators { + backlight_reg: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "backlight_reg"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio 5 4 0>; + enable-active-high; + regulator-boot-on; + }; + + lcd_reg: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "lcd_reg"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio 5 0 0>; + enable-active-high; + regulator-boot-on; + }; + + sd_reg: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "sd_reg"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio 5 5 0>; + enable-active-high; + }; + }; + ahb { mac: ethernet@31060000 { phy-mode = "rmii"; @@ -140,6 +171,7 @@ cd-gpios = <&gpio 3 1 0>; cd-inverted; bus-width = <4>; + vmmc-supply = <&sd_reg>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi index 7f68a1ee7073..210192c38df3 100644 --- a/arch/arm/boot/dts/pxa27x.dtsi +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -13,6 +13,7 @@ interrupts = <25>; #dma-channels = <32>; #dma-cells = <2>; + #dma-requests = <75>; status = "okay"; }; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi index cf6998a0804d..fec47bcd8292 100644 --- a/arch/arm/boot/dts/pxa3xx.dtsi +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -12,6 +12,7 @@ interrupts = <25>; #dma-channels = <32>; #dma-cells = <2>; + #dma-requests = <100>; status = "okay"; }; @@ -30,7 +31,7 @@ reg = <0x43100000 90>; interrupts = <45>; clocks = <&clks CLK_NAND>; - dmas = <&pdma 97>; + dmas = <&pdma 97 3>; dma-names = "data"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts new file mode 100644 index 000000000000..c535b3f0e5cf --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts @@ -0,0 +1,276 @@ +#include "qcom-apq8064-v2.0.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +/ { + model = "Asus Nexus7(flo)"; + compatible = "asus,nexus7-flo", "qcom,apq8064"; + + aliases { + serial0 = &gsbi7_serial; + serial1 = &gsbi6_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + ext_3p3v: regulator-fixed@1 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "ext_3p3v"; + regulator-type = "voltage"; + startup-delay-us = <0>; + gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + power { + label = "Power"; + gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + volume_up { + label = "Volume Up"; + gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_VOLUMEUP>; + }; + volume_down { + label = "Volume Down"; + gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + soc { + rpm@108000 { + regulators { + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + + + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vin_lvs2-supply = <&pm8921_s1>; + + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + vdd_ncp-supply = <&pm8921_l6>; + + /* Buck SMPS */ + s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + /* msm otg HSUSB_VDDCX */ + s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <4800000>; + }; + + /* + * msm_sdcc.1-sdc-vdd_io + * tabla2x-slim-CDC_VDDA_RX + * tabla2x-slim-CDC_VDDA_TX + * tabla2x-slim-CDC_VDD_CP + * tabla2x-slim-VDDIO_CDC + */ + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <3200000>; + regulator-always-on; + }; + + s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; + + /* mipi_dsi.1-dsi1_pll_vdda */ + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + /* msm_otg-HSUSB_3p3 */ + l3 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + bias-pull-down; + }; + + /* msm_otg-HSUSB_1p8 */ + l4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + /* msm_sdcc.1-sdc_vdd */ + l5 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + bias-pull-down; + }; + + l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + /* mipi_dsi.1-dsi1_avdd */ + l11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + /* pwm_power for backlight */ + l17 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3600000>; + bias-pull-down; + }; + + /* camera, qdsp6 */ + l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + /* + * tabla2x-slim-CDC_VDDA_A_1P2V + * tabla2x-slim-VDDD_CDC_D + */ + l25 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + bias-pull-down; + }; + + lvs1 { + bias-pull-down; + }; + + lvs4 { + bias-pull-down; + }; + + lvs5 { + bias-pull-down; + }; + + lvs6 { + bias-pull-down; + }; + /* + * mipi_dsi.1-dsi1_vddio + * pil_riva-pll_vdd + */ + lvs7 { + bias-pull-down; + }; + }; + }; + + gsbi@16200000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + i2c@16280000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + + trackpad@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + interrupt-parent = <&tlmm_pinmux>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + }; + }; + }; + + + gsbi@12440000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + + i2c@12460000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + }; + }; + }; + + gsbi@16500000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + + serial@16540000 { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&gsbi6_uart_4pins>; + }; + }; + + gsbi@16600000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + serial@16640000 { + status = "ok"; + }; + }; + + /* OTG */ + phy@12500000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + + gadget@12500000 { + status = "okay"; + }; + + /* OTG */ + usb@12500000 { + status = "okay"; + }; + + amba { + /* eMMC */ + sdcc@12400000 { + status = "okay"; + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 21095dad7741..35f1d46edded 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -37,6 +37,18 @@ bias-disable; }; }; + + pcie_pins: pcie_pinmux { + mux { + pins = "gpio27"; + function = "gpio"; + }; + conf { + pins = "gpio27"; + drive-strength = <12>; + bias-disable; + }; + }; }; rpm@108000 { @@ -103,6 +115,11 @@ regulator-max-microvolt = <1900000>; bias-pull-down; }; + + pm8921_lvs6: lvs6 { + bias-pull-down; + }; + }; }; @@ -195,6 +212,16 @@ }; }; + pci@1b500000 { + status = "ok"; + vdda-supply = <&pm8921_s3>; + vdda_phy-supply = <&pm8921_lvs6>; + vdda_refclk-supply = <&v3p3_fixed>; + pinctrl-0 = <&pcie_pins>; + pinctrl-names = "default"; + perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; + }; + amba { /* eMMC */ sdcc1: sdcc@12400000 { diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index fd4d49ef9ef2..2eeb0904eaa7 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -9,6 +9,11 @@ aliases { serial0 = &gsbi7_serial; serial1 = &gsbi6_serial; + i2c0 = &gsbi1_i2c; + i2c1 = &gsbi2_i2c; + i2c2 = &gsbi3_i2c; + i2c3 = &gsbi4_i2c; + spi0 = &gsbi5_spi; }; chosen { @@ -157,7 +162,16 @@ gsbi3: gsbi@16200000 { status = "okay"; qcom,mode = <GSBI_PROT_I2C>; - i2c3: i2c@16280000 { + i2c@16280000 { + status = "okay"; + }; + }; + + gsbi@16300000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + /* CAM I2C MIPI-CSI connector */ + i2c@16380000 { status = "okay"; }; }; @@ -178,6 +192,16 @@ }; }; + gsbi@1a200000 { + qcom,mode = <GSBI_PROT_SPI>; + status = "okay"; + spi4: spi@1a280000 { + status = "okay"; + num-cs = <1>; + cs-gpios = <&tlmm_pinmux 53 0>; + }; + }; + gsbi@16500000 { status = "ok"; qcom,mode = <GSBI_PROT_UART_W_FC>; diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi new file mode 100644 index 000000000000..b57c59d5bc00 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi @@ -0,0 +1,208 @@ + +&tlmm_pinmux { + sdc4_gpios: sdc4-gpios { + pios { + pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; + function = "sdc4"; + }; + }; + + ps_hold: ps_hold { + mux { + pins = "gpio78"; + function = "ps_hold"; + }; + }; + + i2c1_pins: i2c1 { + mux { + pins = "gpio20", "gpio21"; + function = "gsbi1"; + }; + + pinconf { + pins = "gpio20", "gpio21"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c1_pins_sleep: i2c1_pins_sleep { + mux { + pins = "gpio20", "gpio21"; + function = "gpio"; + }; + pinconf { + pins = "gpio20", "gpio21"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + + i2c2_pins: i2c2 { + mux { + pins = "gpio24", "gpio25"; + function = "gsbi2"; + }; + + pinconf { + pins = "gpio24", "gpio25"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c2_pins_sleep: i2c2_pins_sleep { + mux { + pins = "gpio24", "gpio25"; + function = "gpio"; + }; + + pinconf { + pins = "gpio24", "gpio25"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + + i2c3_pins: i2c3 { + mux { + pins = "gpio8", "gpio9"; + function = "gsbi3"; + }; + + pinconf { + pins = "gpio8", "gpio9"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c3_pins_sleep: i2c3_pins_sleep { + mux { + pins = "gpio8", "gpio9"; + function = "gpio"; + }; + pinconf { + pins = "gpio8", "gpio9"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + + i2c4_pins: i2c4 { + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + }; + + pinconf { + pins = "gpio12", "gpio13"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c4_pins_sleep: i2c4_pins_sleep { + mux { + pins = "gpio12", "gpio13"; + function = "gpio"; + }; + pinconf { + pins = "gpio12", "gpio13"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + + spi5_default: spi5_default { + pinmux { + pins = "gpio51", "gpio52", "gpio54"; + function = "gsbi5"; + }; + + pinmux_cs { + function = "gpio"; + pins = "gpio53"; + }; + + pinconf { + pins = "gpio51", "gpio52", "gpio54"; + drive-strength = <16>; + bias-disable; + }; + + pinconf_cs { + pins = "gpio53"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi5_sleep: spi5_sleep { + pinmux { + function = "gpio"; + pins = "gpio51", "gpio52", "gpio53", "gpio54"; + }; + + pinconf { + pins = "gpio51", "gpio52", "gpio53", "gpio54"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + i2c6_pins: i2c6 { + mux { + pins = "gpio16", "gpio17"; + function = "gsbi6"; + }; + + pinconf { + pins = "gpio16", "gpio17"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c6_pins_sleep: i2c6_pins_sleep { + mux { + pins = "gpio16", "gpio17"; + function = "gpio"; + }; + pinconf { + pins = "gpio16", "gpio17"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + + gsbi6_uart_2pins: gsbi6_uart_2pins { + mux { + pins = "gpio14", "gpio15"; + function = "gsbi6"; + }; + }; + + gsbi6_uart_4pins: gsbi6_uart_4pins { + mux { + pins = "gpio14", "gpio15", "gpio16", "gpio17"; + function = "gsbi6"; + }; + }; + + gsbi7_uart_2pins: gsbi7_uart_2pins { + mux { + pins = "gpio82", "gpio83"; + function = "gsbi7"; + }; + }; + + gsbi7_uart_4pins: gsbi7_uart_4pins { + mux { + pins = "gpio82", "gpio83", "gpio84", "gpio85"; + function = "gsbi7"; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index ed521e85e208..65d0e8d98259 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -142,62 +142,6 @@ pinctrl-names = "default"; pinctrl-0 = <&ps_hold>; - - sdc4_gpios: sdc4-gpios { - pios { - pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; - function = "sdc4"; - }; - }; - - ps_hold: ps_hold { - mux { - pins = "gpio78"; - function = "ps_hold"; - }; - }; - - i2c1_pins: i2c1 { - mux { - pins = "gpio20", "gpio21"; - function = "gsbi1"; - }; - }; - - i2c3_pins: i2c3 { - mux { - pins = "gpio8", "gpio9"; - function = "gsbi3"; - }; - }; - - gsbi6_uart_2pins: gsbi6_uart_2pins { - mux { - pins = "gpio14", "gpio15"; - function = "gsbi6"; - }; - }; - - gsbi6_uart_4pins: gsbi6_uart_4pins { - mux { - pins = "gpio14", "gpio15", "gpio16", "gpio17"; - function = "gsbi6"; - }; - }; - - gsbi7_uart_2pins: gsbi7_uart_2pins { - mux { - pins = "gpio82", "gpio83"; - function = "gsbi7"; - }; - }; - - gsbi7_uart_4pins: gsbi7_uart_4pins { - mux { - pins = "gpio82", "gpio83", "gpio84", "gpio85"; - function = "gsbi7"; - }; - }; }; sfpb_wrapper_mutex: syscon@1200000 { @@ -281,10 +225,10 @@ syscon-tcsr = <&tcsr>; - i2c1: i2c@12460000 { + gsbi1_i2c: i2c@12460000 { compatible = "qcom,i2c-qup-v1.1.1"; - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins &i2c1_pins_sleep>; + pinctrl-names = "default", "sleep"; reg = <0x12460000 0x1000>; interrupts = <0 194 IRQ_TYPE_NONE>; clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; @@ -292,6 +236,7 @@ #address-cells = <1>; #size-cells = <0>; }; + }; gsbi2: gsbi@12480000 { @@ -307,9 +252,11 @@ syscon-tcsr = <&tcsr>; - i2c2: i2c@124a0000 { + gsbi2_i2c: i2c@124a0000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x124a0000 0x1000>; + pinctrl-0 = <&i2c2_pins &i2c2_pins_sleep>; + pinctrl-names = "default", "sleep"; interrupts = <0 196 IRQ_TYPE_NONE>; clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; clock-names = "core", "iface"; @@ -328,15 +275,40 @@ #address-cells = <1>; #size-cells = <1>; ranges; - i2c3: i2c@16280000 { + gsbi3_i2c: i2c@16280000 { compatible = "qcom,i2c-qup-v1.1.1"; - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins &i2c3_pins_sleep>; + pinctrl-names = "default", "sleep"; reg = <0x16280000 0x1000>; interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>; clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gsbi4: gsbi@16300000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <4>; + reg = <0x16300000 0x03>; + clocks = <&gcc GSBI4_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gsbi4_i2c: i2c@16380000 { + compatible = "qcom,i2c-qup-v1.1.1"; + pinctrl-0 = <&i2c4_pins &i2c4_pins_sleep>; + pinctrl-names = "default", "sleep"; + reg = <0x16380000 0x1000>; + interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>; + clocks = <&gcc GSBI4_QUP_CLK>, + <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; }; }; @@ -360,6 +332,19 @@ clock-names = "core", "iface"; status = "disabled"; }; + + gsbi5_spi: spi@1a280000 { + compatible = "qcom,spi-qup-v1.1.1"; + reg = <0x1a280000 0x1000>; + interrupts = <0 155 0>; + pinctrl-0 = <&spi5_default &spi5_sleep>; + pinctrl-names = "default", "sleep"; + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; }; gsbi6: gsbi@16500000 { @@ -382,6 +367,17 @@ clock-names = "core", "iface"; status = "disabled"; }; + + gsbi6_i2c: i2c@16580000 { + compatible = "qcom,i2c-qup-v1.1.1"; + pinctrl-0 = <&i2c6_pins &i2c6_pins_sleep>; + pinctrl-names = "default", "sleep"; + reg = <0x16580000 0x1000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>; + clocks = <&gcc GSBI6_QUP_CLK>, + <&gcc GSBI6_H_CLK>; + clock-names = "core", "iface"; + }; }; gsbi7: gsbi@16600000 { @@ -521,6 +517,11 @@ <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ack", "err", "wakeup"; + rpmcc: clock-controller { + compatible = "qcom,rpmcc-apq8064", "qcom,rpmcc"; + #clock-cells = <1>; + }; + regulators { compatible = "qcom,rpm-pm8921-regulators"; @@ -721,7 +722,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -823,3 +824,4 @@ }; }; }; +#include "qcom-apq8064-pins.dtsi" diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 08214cbae16d..a33a09f6821e 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -91,6 +91,20 @@ interrupts = <1 7 0xf04>; }; + clocks { + xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <1 2 0xf08>, diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index fa698635eea0..2601a907947b 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -62,6 +62,18 @@ }; clocks { + cxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + pxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + sleep_clk: sleep_clk { compatible = "fixed-clock"; clock-frequency = <32768>; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index e5f7f33aa467..cd214030b84a 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -42,6 +42,26 @@ interrupts = <1 9 0x304>; }; + clocks { + cxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + pxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + + sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -167,7 +187,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 51a40d84145c..da05e28a81a7 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -251,7 +251,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index dfdafdcb8aae..ef5330578431 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -1,6 +1,6 @@ /dts-v1/; -#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> #include "skeleton.dtsi" @@ -14,10 +14,50 @@ #size-cells = <1>; ranges; + mpss@08000000 { + reg = <0x08000000 0x5100000>; + no-map; + }; + + mba@00d100000 { + reg = <0x0d100000 0x100000>; + no-map; + }; + + reserved@0d200000 { + reg = <0x0d200000 0xa00000>; + no-map; + }; + + adsp@0dc00000 { + reg = <0x0dc00000 0x1900000>; + no-map; + }; + + venus@0f500000 { + reg = <0x0f500000 0x500000>; + no-map; + }; + smem_region: smem@fa00000 { reg = <0xfa00000 0x200000>; no-map; }; + + tz@0fc00000 { + reg = <0x0fc00000 0x160000>; + no-map; + }; + + efs@0fd600000 { + reg = <0x0fd60000 0x1a0000>; + no-map; + }; + + unused@0ff00000 { + reg = <0x0ff00000 0x10100000>; + no-map; + }; }; cpus { @@ -91,6 +131,20 @@ interrupts = <1 7 0xf04>; }; + clocks { + xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <1 2 0xf08>, @@ -109,6 +163,73 @@ hwlocks = <&tcsr_mutex 3>; }; + smp2p-wcnss { + compatible = "qcom,smp2p"; + qcom,smem = <451>, <431>; + + interrupt-parent = <&intc>; + interrupts = <0 143 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 18>; + + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + wcnss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,state-cells = <1>; + }; + + wcnss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smsm { + compatible = "qcom,smsm"; + + #address-cells = <1>; + #size-cells = <0>; + + qcom,ipc-1 = <&apcs 8 13>; + qcom,ipc-2 = <&apcs 8 9>; + qcom,ipc-3 = <&apcs 8 19>; + + apps_smsm: apps@0 { + reg = <0>; + + #qcom,state-cells = <1>; + }; + + modem_smsm: modem@1 { + reg = <1>; + interrupts = <0 26 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + adsp_smsm: adsp@2 { + reg = <2>; + interrupts = <0 157 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@7 { + reg = <7>; + interrupts = <0 144 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -339,6 +460,8 @@ clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; + dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; + dma-names = "tx", "rx"; }; spmi_bus: spmi@fc4cf000 { @@ -356,6 +479,16 @@ interrupt-controller; #interrupt-cells = <4>; }; + + blsp2_dma: dma-controller@f9944000 { + compatible = "qcom,bam-v1.4.0"; + reg = <0xf9944000 0x19000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; }; smd { diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi index 9f357f68713c..0512f645922e 100644 --- a/arch/arm/boot/dts/qcom-pm8841.dtsi +++ b/arch/arm/boot/dts/qcom-pm8841.dtsi @@ -11,7 +11,7 @@ pm8841_mpps: mpps@a000 { compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp"; - reg = <0xa000 0x400>; + reg = <0xa000>; gpio-controller; #gpio-cells = <2>; interrupts = <4 0xa0 0 IRQ_TYPE_NONE>, @@ -22,7 +22,7 @@ temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; - reg = <0x2400 0x100>; + reg = <0x2400>; interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>; }; }; diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index ca53a5947437..d95edb6f6265 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -12,15 +12,15 @@ rtc@6000 { compatible = "qcom,pm8941-rtc"; - reg = <0x6000 0x100>, - <0x6100 0x100>; + reg = <0x6000>, + <0x6100>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; pwrkey@800 { compatible = "qcom,pm8941-pwrkey"; - reg = <0x800 0x100>; + reg = <0x800>; interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; debounce = <15625>; bias-pull-up; @@ -28,7 +28,7 @@ charger@1000 { compatible = "qcom,pm8941-charger"; - reg = <0x1000 0x700>; + reg = <0x1000>; interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>, <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>, <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>, @@ -49,7 +49,7 @@ pm8941_gpios: gpios@c000 { compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio"; - reg = <0xc000 0x2400>; + reg = <0xc000>; gpio-controller; #gpio-cells = <2>; interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, @@ -92,7 +92,7 @@ pm8941_mpps: mpps@a000 { compatible = "qcom,pm8941-mpp", "qcom,spmi-mpp"; - reg = <0xa000 0x800>; + reg = <0xa000>; gpio-controller; #gpio-cells = <2>; interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, @@ -107,7 +107,7 @@ pm8941_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; - reg = <0x2400 0x100>; + reg = <0x2400>; interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; io-channels = <&pm8941_vadc VADC_DIE_TEMP>; io-channel-names = "thermal"; @@ -116,7 +116,7 @@ pm8941_vadc: vadc@3100 { compatible = "qcom,spmi-vadc"; - reg = <0x3100 0x100>; + reg = <0x3100>; interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; @@ -141,7 +141,7 @@ pm8941_iadc: iadc@3600 { compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc"; - reg = <0x3600 0x100>; + reg = <0x3600>; interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>; qcom,external-resistor-micro-ohms = <10000>; }; @@ -161,7 +161,7 @@ pm8941_wled: wled@d800 { compatible = "qcom,pm8941-wled"; - reg = <0xd800 0x100>; + reg = <0xd800>; label = "backlight"; status = "disabled"; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index 4657d7fb5bce..89e46ebef1bc 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -10,6 +10,7 @@ */ #include <dt-bindings/clock/r7s72100-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -152,12 +153,12 @@ scif0: serial@e8007000 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe8007000 64>; - interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>, - <0 191 IRQ_TYPE_LEVEL_HIGH>, - <0 192 IRQ_TYPE_LEVEL_HIGH>, - <0 189 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -165,12 +166,12 @@ scif1: serial@e8007800 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe8007800 64>; - interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>, - <0 195 IRQ_TYPE_LEVEL_HIGH>, - <0 196 IRQ_TYPE_LEVEL_HIGH>, - <0 193 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -178,12 +179,12 @@ scif2: serial@e8008000 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe8008000 64>; - interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, - <0 199 IRQ_TYPE_LEVEL_HIGH>, - <0 200 IRQ_TYPE_LEVEL_HIGH>, - <0 197 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF2>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -191,12 +192,12 @@ scif3: serial@e8008800 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe8008800 64>; - interrupts = <0 202 IRQ_TYPE_LEVEL_HIGH>, - <0 203 IRQ_TYPE_LEVEL_HIGH>, - <0 204 IRQ_TYPE_LEVEL_HIGH>, - <0 201 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF3>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -204,12 +205,12 @@ scif4: serial@e8009000 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe8009000 64>; - interrupts = <0 206 IRQ_TYPE_LEVEL_HIGH>, - <0 207 IRQ_TYPE_LEVEL_HIGH>, - <0 208 IRQ_TYPE_LEVEL_HIGH>, - <0 205 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF4>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -217,12 +218,12 @@ scif5: serial@e8009800 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe8009800 64>; - interrupts = <0 210 IRQ_TYPE_LEVEL_HIGH>, - <0 211 IRQ_TYPE_LEVEL_HIGH>, - <0 212 IRQ_TYPE_LEVEL_HIGH>, - <0 209 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF5>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -230,12 +231,12 @@ scif6: serial@e800a000 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe800a000 64>; - interrupts = <0 214 IRQ_TYPE_LEVEL_HIGH>, - <0 215 IRQ_TYPE_LEVEL_HIGH>, - <0 216 IRQ_TYPE_LEVEL_HIGH>, - <0 213 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF6>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -243,12 +244,12 @@ scif7: serial@e800a800 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe800a800 64>; - interrupts = <0 218 IRQ_TYPE_LEVEL_HIGH>, - <0 219 IRQ_TYPE_LEVEL_HIGH>, - <0 220 IRQ_TYPE_LEVEL_HIGH>, - <0 217 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF7>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -256,9 +257,9 @@ spi0: spi@e800c800 { compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz"; reg = <0xe800c800 0x24>; - interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>, - <0 239 IRQ_TYPE_LEVEL_HIGH>, - <0 240 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; clocks = <&mstp10_clks R7S72100_CLK_SPI0>; power-domains = <&cpg_clocks>; @@ -271,9 +272,9 @@ spi1: spi@e800d000 { compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz"; reg = <0xe800d000 0x24>; - interrupts = <0 241 IRQ_TYPE_LEVEL_HIGH>, - <0 242 IRQ_TYPE_LEVEL_HIGH>, - <0 243 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; clocks = <&mstp10_clks R7S72100_CLK_SPI1>; power-domains = <&cpg_clocks>; @@ -286,9 +287,9 @@ spi2: spi@e800d800 { compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz"; reg = <0xe800d800 0x24>; - interrupts = <0 244 IRQ_TYPE_LEVEL_HIGH>, - <0 245 IRQ_TYPE_LEVEL_HIGH>, - <0 246 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; clocks = <&mstp10_clks R7S72100_CLK_SPI2>; power-domains = <&cpg_clocks>; @@ -301,9 +302,9 @@ spi3: spi@e800e000 { compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz"; reg = <0xe800e000 0x24>; - interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>, - <0 248 IRQ_TYPE_LEVEL_HIGH>, - <0 249 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; clocks = <&mstp10_clks R7S72100_CLK_SPI3>; power-domains = <&cpg_clocks>; @@ -316,9 +317,9 @@ spi4: spi@e800e800 { compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz"; reg = <0xe800e800 0x24>; - interrupts = <0 250 IRQ_TYPE_LEVEL_HIGH>, - <0 251 IRQ_TYPE_LEVEL_HIGH>, - <0 252 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; clocks = <&mstp10_clks R7S72100_CLK_SPI4>; power-domains = <&cpg_clocks>; @@ -342,14 +343,14 @@ #size-cells = <0>; compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; reg = <0xfcfee000 0x44>; - interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>, - <0 158 IRQ_TYPE_EDGE_RISING>, - <0 159 IRQ_TYPE_EDGE_RISING>, - <0 160 IRQ_TYPE_LEVEL_HIGH>, - <0 161 IRQ_TYPE_LEVEL_HIGH>, - <0 162 IRQ_TYPE_LEVEL_HIGH>, - <0 163 IRQ_TYPE_LEVEL_HIGH>, - <0 164 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R7S72100_CLK_I2C0>; clock-frequency = <100000>; power-domains = <&cpg_clocks>; @@ -361,14 +362,14 @@ #size-cells = <0>; compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; reg = <0xfcfee400 0x44>; - interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>, - <0 166 IRQ_TYPE_EDGE_RISING>, - <0 167 IRQ_TYPE_EDGE_RISING>, - <0 168 IRQ_TYPE_LEVEL_HIGH>, - <0 169 IRQ_TYPE_LEVEL_HIGH>, - <0 170 IRQ_TYPE_LEVEL_HIGH>, - <0 171 IRQ_TYPE_LEVEL_HIGH>, - <0 172 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R7S72100_CLK_I2C1>; clock-frequency = <100000>; power-domains = <&cpg_clocks>; @@ -380,14 +381,14 @@ #size-cells = <0>; compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; reg = <0xfcfee800 0x44>; - interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>, - <0 174 IRQ_TYPE_EDGE_RISING>, - <0 175 IRQ_TYPE_EDGE_RISING>, - <0 176 IRQ_TYPE_LEVEL_HIGH>, - <0 177 IRQ_TYPE_LEVEL_HIGH>, - <0 178 IRQ_TYPE_LEVEL_HIGH>, - <0 179 IRQ_TYPE_LEVEL_HIGH>, - <0 180 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R7S72100_CLK_I2C2>; clock-frequency = <100000>; power-domains = <&cpg_clocks>; @@ -399,14 +400,14 @@ #size-cells = <0>; compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; reg = <0xfcfeec00 0x44>; - interrupts = <0 181 IRQ_TYPE_LEVEL_HIGH>, - <0 182 IRQ_TYPE_EDGE_RISING>, - <0 183 IRQ_TYPE_EDGE_RISING>, - <0 184 IRQ_TYPE_LEVEL_HIGH>, - <0 185 IRQ_TYPE_LEVEL_HIGH>, - <0 186 IRQ_TYPE_LEVEL_HIGH>, - <0 187 IRQ_TYPE_LEVEL_HIGH>, - <0 188 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R7S72100_CLK_I2C3>; clock-frequency = <100000>; power-domains = <&cpg_clocks>; @@ -416,7 +417,7 @@ mtu2: timer@fcff0000 { compatible = "renesas,mtu2-r7s72100", "renesas,mtu2"; reg = <0xfcff0000 0x400>; - interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "tgi0a"; clocks = <&mstp3_clks R7S72100_CLK_MTU2>; clock-names = "fck"; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index cb4f7b2798fe..6583a1dfca1f 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -29,6 +29,7 @@ reg = <0>; clock-frequency = <1500000000>; power-domains = <&pd_a2sl>; + next-level-cache = <&L2_CA15>; }; }; @@ -39,10 +40,26 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + L2_CA15: cache-controller@0 { + compatible = "cache"; + clocks = <&cpg_clocks R8A73A4_CLK_Z>; + power-domains = <&pd_a3sm>; + cache-unified; + cache-level = <2>; + }; + + L2_CA7: cache-controller@1 { + compatible = "cache"; + clocks = <&cpg_clocks R8A73A4_CLK_Z2>; + power-domains = <&pd_a3km>; + cache-unified; + cache-level = <2>; }; dbsc1: memory-controller@e6790000 { @@ -69,27 +86,27 @@ dma0: dma-controller@e6700020 { compatible = "renesas,shdma-r8a73a4"; reg = <0 0xe6700020 0 0x89e0>; - interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH - 0 200 IRQ_TYPE_LEVEL_HIGH - 0 201 IRQ_TYPE_LEVEL_HIGH - 0 202 IRQ_TYPE_LEVEL_HIGH - 0 203 IRQ_TYPE_LEVEL_HIGH - 0 204 IRQ_TYPE_LEVEL_HIGH - 0 205 IRQ_TYPE_LEVEL_HIGH - 0 206 IRQ_TYPE_LEVEL_HIGH - 0 207 IRQ_TYPE_LEVEL_HIGH - 0 208 IRQ_TYPE_LEVEL_HIGH - 0 209 IRQ_TYPE_LEVEL_HIGH - 0 210 IRQ_TYPE_LEVEL_HIGH - 0 211 IRQ_TYPE_LEVEL_HIGH - 0 212 IRQ_TYPE_LEVEL_HIGH - 0 213 IRQ_TYPE_LEVEL_HIGH - 0 214 IRQ_TYPE_LEVEL_HIGH - 0 215 IRQ_TYPE_LEVEL_HIGH - 0 216 IRQ_TYPE_LEVEL_HIGH - 0 217 IRQ_TYPE_LEVEL_HIGH - 0 218 IRQ_TYPE_LEVEL_HIGH - 0 219 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -106,7 +123,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x428>; - interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A73A4_CLK_IIC5>; power-domains = <&pd_a3sp>; @@ -116,7 +133,7 @@ cmt1: timer@e6130000 { compatible = "renesas,cmt-48-r8a73a4", "renesas,cmt-48-gen2"; reg = <0 0xe6130000 0 0x1004>; - interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_CMT1>; clock-names = "fck"; power-domains = <&pd_c5>; @@ -131,38 +148,38 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, - <0 1 IRQ_TYPE_LEVEL_HIGH>, - <0 2 IRQ_TYPE_LEVEL_HIGH>, - <0 3 IRQ_TYPE_LEVEL_HIGH>, - <0 4 IRQ_TYPE_LEVEL_HIGH>, - <0 5 IRQ_TYPE_LEVEL_HIGH>, - <0 6 IRQ_TYPE_LEVEL_HIGH>, - <0 7 IRQ_TYPE_LEVEL_HIGH>, - <0 8 IRQ_TYPE_LEVEL_HIGH>, - <0 9 IRQ_TYPE_LEVEL_HIGH>, - <0 10 IRQ_TYPE_LEVEL_HIGH>, - <0 11 IRQ_TYPE_LEVEL_HIGH>, - <0 12 IRQ_TYPE_LEVEL_HIGH>, - <0 13 IRQ_TYPE_LEVEL_HIGH>, - <0 14 IRQ_TYPE_LEVEL_HIGH>, - <0 15 IRQ_TYPE_LEVEL_HIGH>, - <0 16 IRQ_TYPE_LEVEL_HIGH>, - <0 17 IRQ_TYPE_LEVEL_HIGH>, - <0 18 IRQ_TYPE_LEVEL_HIGH>, - <0 19 IRQ_TYPE_LEVEL_HIGH>, - <0 20 IRQ_TYPE_LEVEL_HIGH>, - <0 21 IRQ_TYPE_LEVEL_HIGH>, - <0 22 IRQ_TYPE_LEVEL_HIGH>, - <0 23 IRQ_TYPE_LEVEL_HIGH>, - <0 24 IRQ_TYPE_LEVEL_HIGH>, - <0 25 IRQ_TYPE_LEVEL_HIGH>, - <0 26 IRQ_TYPE_LEVEL_HIGH>, - <0 27 IRQ_TYPE_LEVEL_HIGH>, - <0 28 IRQ_TYPE_LEVEL_HIGH>, - <0 29 IRQ_TYPE_LEVEL_HIGH>, - <0 30 IRQ_TYPE_LEVEL_HIGH>, - <0 31 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A73A4_CLK_IRQC>; power-domains = <&pd_c4>; }; @@ -172,32 +189,32 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0200 0 0x200>; - interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>, - <0 33 IRQ_TYPE_LEVEL_HIGH>, - <0 34 IRQ_TYPE_LEVEL_HIGH>, - <0 35 IRQ_TYPE_LEVEL_HIGH>, - <0 36 IRQ_TYPE_LEVEL_HIGH>, - <0 37 IRQ_TYPE_LEVEL_HIGH>, - <0 38 IRQ_TYPE_LEVEL_HIGH>, - <0 39 IRQ_TYPE_LEVEL_HIGH>, - <0 40 IRQ_TYPE_LEVEL_HIGH>, - <0 41 IRQ_TYPE_LEVEL_HIGH>, - <0 42 IRQ_TYPE_LEVEL_HIGH>, - <0 43 IRQ_TYPE_LEVEL_HIGH>, - <0 44 IRQ_TYPE_LEVEL_HIGH>, - <0 45 IRQ_TYPE_LEVEL_HIGH>, - <0 46 IRQ_TYPE_LEVEL_HIGH>, - <0 47 IRQ_TYPE_LEVEL_HIGH>, - <0 48 IRQ_TYPE_LEVEL_HIGH>, - <0 49 IRQ_TYPE_LEVEL_HIGH>, - <0 50 IRQ_TYPE_LEVEL_HIGH>, - <0 51 IRQ_TYPE_LEVEL_HIGH>, - <0 52 IRQ_TYPE_LEVEL_HIGH>, - <0 53 IRQ_TYPE_LEVEL_HIGH>, - <0 54 IRQ_TYPE_LEVEL_HIGH>, - <0 55 IRQ_TYPE_LEVEL_HIGH>, - <0 56 IRQ_TYPE_LEVEL_HIGH>, - <0 57 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A73A4_CLK_IRQC>; power-domains = <&pd_c4>; }; @@ -237,7 +254,7 @@ compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>, <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>; - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>; power-domains = <&pd_c5>; }; @@ -247,7 +264,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x428>; - interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_IIC0>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -258,7 +275,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x428>; - interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_IIC1>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -269,7 +286,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6520000 0 0x428>; - interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_IIC2>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -280,7 +297,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6530000 0 0x428>; - interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A73A4_CLK_IIC3>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -291,7 +308,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6540000 0 0x428>; - interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A73A4_CLK_IIC4>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -302,7 +319,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6550000 0 0x428>; - interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_IIC6>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -313,7 +330,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6560000 0 0x428>; - interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_IIC7>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -324,7 +341,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic"; reg = <0 0xe6570000 0 0x428>; - interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks R8A73A4_CLK_IIC8>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -333,9 +350,9 @@ scifb0: serial@e6c20000 { compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6c20000 0 0x100>; - interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFB0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -343,9 +360,9 @@ scifb1: serial@e6c30000 { compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6c30000 0 0x100>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFB1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -353,9 +370,9 @@ scifa0: serial@e6c40000 { compatible = "renesas,scifa-r8a73a4", "renesas,scifa"; reg = <0 0xe6c40000 0 0x100>; - interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -363,9 +380,9 @@ scifa1: serial@e6c50000 { compatible = "renesas,scifa-r8a73a4", "renesas,scifa"; reg = <0 0xe6c50000 0 0x100>; - interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -373,9 +390,9 @@ scifb2: serial@e6ce0000 { compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6ce0000 0 0x100>; - interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFB2>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -383,9 +400,9 @@ scifb3: serial@e6cf0000 { compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6cf0000 0 0x100>; - interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A73A4_CLK_SCIFB3>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_c4>; status = "disabled"; }; @@ -393,7 +410,7 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee100000 0 0x100>; - interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_SDHI0>; power-domains = <&pd_a3sp>; cap-sd-highspeed; @@ -403,7 +420,7 @@ sdhi1: sd@ee120000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee120000 0 0x100>; - interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_SDHI1>; power-domains = <&pd_a3sp>; cap-sd-highspeed; @@ -413,7 +430,7 @@ sdhi2: sd@ee140000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee140000 0 0x100>; - interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_SDHI2>; power-domains = <&pd_a3sp>; cap-sd-highspeed; @@ -423,7 +440,7 @@ mmcif0: mmc@ee200000 { compatible = "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; - interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_MMCIF0>; power-domains = <&pd_a3sp>; reg-io-width = <4>; @@ -433,7 +450,7 @@ mmcif1: mmc@ee220000 { compatible = "renesas,sh-mmcif"; reg = <0 0xee220000 0 0x80>; - interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_MMCIF1>; power-domains = <&pd_a3sp>; reg-io-width = <4>; @@ -449,7 +466,7 @@ <0 0xf1002000 0 0x1000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; - interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; bsc: bus@fec10000 { diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 6ef954766eef..995fbda74b7a 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -11,6 +11,7 @@ /include/ "skeleton.dtsi" #include <dt-bindings/clock/r8a7740-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -41,7 +42,7 @@ L2: cache-controller { compatible = "arm,pl310-cache"; reg = <0xf0100000 0x1000>; - interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_a3sm>; arm,data-latency = <3 3 3>; arm,tag-latency = <2 2 2>; @@ -58,7 +59,7 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; }; ptm { @@ -69,7 +70,7 @@ cmt1: timer@e6138000 { compatible = "renesas,cmt-48-r8a7740", "renesas,cmt-48"; reg = <0xe6138000 0x170>; - interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_CMT1>; clock-names = "fck"; power-domains = <&pd_c5>; @@ -89,14 +90,14 @@ <0xe6900020 1>, <0xe6900040 1>, <0xe6900060 1>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_INTCA>; power-domains = <&pd_a4s>; }; @@ -111,14 +112,14 @@ <0xe6900024 1>, <0xe6900044 1>, <0xe6900064 1>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_INTCA>; power-domains = <&pd_a4s>; }; @@ -133,14 +134,14 @@ <0xe6900028 1>, <0xe6900048 1>, <0xe6900068 1>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_INTCA>; power-domains = <&pd_a4s>; }; @@ -155,14 +156,14 @@ <0xe690002c 1>, <0xe690004c 1>, <0xe690006c 1>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH - 0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_INTCA>; power-domains = <&pd_a4s>; }; @@ -171,7 +172,7 @@ compatible = "renesas,gether-r8a7740"; reg = <0xe9a00000 0x800>, <0xe9a01800 0x800>; - interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_GETHER>; power-domains = <&pd_a4s>; phy-mode = "mii"; @@ -185,10 +186,10 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic"; reg = <0xfff20000 0x425>; - interrupts = <0 201 IRQ_TYPE_LEVEL_HIGH - 0 202 IRQ_TYPE_LEVEL_HIGH - 0 203 IRQ_TYPE_LEVEL_HIGH - 0 204 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7740_CLK_IIC0>; power-domains = <&pd_a4r>; status = "disabled"; @@ -199,10 +200,10 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic"; reg = <0xe6c20000 0x425>; - interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH - 0 71 IRQ_TYPE_LEVEL_HIGH - 0 72 IRQ_TYPE_LEVEL_HIGH - 0 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_IIC1>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -211,9 +212,9 @@ scifa0: serial@e6c40000 { compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6c40000 0x100>; - interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -221,9 +222,9 @@ scifa1: serial@e6c50000 { compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6c50000 0x100>; - interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -231,9 +232,9 @@ scifa2: serial@e6c60000 { compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6c60000 0x100>; - interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA2>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -241,9 +242,9 @@ scifa3: serial@e6c70000 { compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6c70000 0x100>; - interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA3>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -251,9 +252,9 @@ scifa4: serial@e6c80000 { compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6c80000 0x100>; - interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA4>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -261,9 +262,9 @@ scifa5: serial@e6cb0000 { compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6cb0000 0x100>; - interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA5>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -271,9 +272,9 @@ scifa6: serial@e6cc0000 { compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6cc0000 0x100>; - interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA6>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -281,9 +282,9 @@ scifa7: serial@e6cd0000 { compatible = "renesas,scifa-r8a7740", "renesas,scifa"; reg = <0xe6cd0000 0x100>; - interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA7>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -291,9 +292,9 @@ scifb: serial@e6c30000 { compatible = "renesas,scifb-r8a7740", "renesas,scifb"; reg = <0xe6c30000 0x100>; - interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFB>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -329,8 +330,8 @@ mmcif0: mmc@e6bd0000 { compatible = "renesas,mmcif-r8a7740", "renesas,sh-mmcif"; reg = <0xe6bd0000 0x100>; - interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH - 0 57 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_MMC>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -339,9 +340,9 @@ sdhi0: sd@e6850000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6850000 0x100>; - interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH - 0 118 IRQ_TYPE_LEVEL_HIGH - 0 119 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_SDHI0>; power-domains = <&pd_a3sp>; cap-sd-highspeed; @@ -352,9 +353,9 @@ sdhi1: sd@e6860000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6860000 0x100>; - interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH - 0 122 IRQ_TYPE_LEVEL_HIGH - 0 123 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_SDHI1>; power-domains = <&pd_a3sp>; cap-sd-highspeed; @@ -365,9 +366,9 @@ sdhi2: sd@e6870000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6870000 0x100>; - interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH - 0 126 IRQ_TYPE_LEVEL_HIGH - 0 127 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7740_CLK_SDHI2>; power-domains = <&pd_a3sp>; cap-sd-highspeed; @@ -379,7 +380,7 @@ #sound-dai-cells = <1>; compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2"; reg = <0xfe1f0000 0x400>; - interrupts = <0 9 0x4>; + interrupts = <GIC_SPI 9 0x4>; clocks = <&mstp3_clks R8A7740_CLK_FSI>; power-domains = <&pd_a4mp>; status = "disabled"; @@ -388,9 +389,9 @@ tmu0: timer@fff80000 { compatible = "renesas,tmu-r8a7740", "renesas,tmu"; reg = <0xfff80000 0x2c>; - interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, - <0 199 IRQ_TYPE_LEVEL_HIGH>, - <0 200 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7740_CLK_TMU0>; clock-names = "fck"; power-domains = <&pd_a4r>; @@ -403,9 +404,9 @@ tmu1: timer@fff90000 { compatible = "renesas,tmu-r8a7740", "renesas,tmu"; reg = <0xfff90000 0x2c>; - interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>, - <0 171 IRQ_TYPE_LEVEL_HIGH>, - <0 172 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7740_CLK_TMU1>; clock-names = "fck"; power-domains = <&pd_a4r>; diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index a52b359e2ae2..21e3b9dda2da 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -126,11 +126,19 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + scif0_pins: serial0 { renesas,groups = "scif0_data_a", "scif0_ctrl"; renesas,function = "scif0"; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk"; + renesas,function = "scif_clk"; + }; + mmc_pins: mmc { renesas,groups = "mmc_data8", "mmc_ctrl"; renesas,function = "mmc"; @@ -217,3 +225,8 @@ status = "okay"; }; + +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 791aafd310a5..f83a348fc07a 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -17,6 +17,7 @@ /include/ "skeleton.dtsi" #include <dt-bindings/clock/r8a7778-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -51,7 +52,7 @@ ether: ethernet@fde00000 { compatible = "renesas,ether-r8a7778"; reg = <0xfde00000 0x400>; - interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7778_CLK_ETHER>; power-domains = <&cpg_clocks>; phy-mode = "rmii"; @@ -79,17 +80,17 @@ <0xfe780024 4>, <0xfe780044 4>, <0xfe780064 4>; - interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH - 0 28 IRQ_TYPE_LEVEL_HIGH - 0 29 IRQ_TYPE_LEVEL_HIGH - 0 30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; sense-bitfield-width = <2>; }; gpio0: gpio@ffc40000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc40000 0x2c>; - interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; @@ -100,7 +101,7 @@ gpio1: gpio@ffc41000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc41000 0x2c>; - interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 32 32>; @@ -111,7 +112,7 @@ gpio2: gpio@ffc42000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc42000 0x2c>; - interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 64 32>; @@ -122,7 +123,7 @@ gpio3: gpio@ffc43000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc43000 0x2c>; - interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; @@ -133,7 +134,7 @@ gpio4: gpio@ffc44000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc44000 0x2c>; - interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 128 27>; @@ -151,7 +152,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc70000 0x1000>; - interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -162,7 +163,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc71000 0x1000>; - interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C1>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -173,7 +174,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc72000 0x1000>; - interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C2>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -184,7 +185,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc73000 0x1000>; - interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C3>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -193,9 +194,9 @@ tmu0: timer@ffd80000 { compatible = "renesas,tmu-r8a7778", "renesas,tmu"; reg = <0xffd80000 0x30>; - interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>, - <0 33 IRQ_TYPE_LEVEL_HIGH>, - <0 34 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_TMU0>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -208,9 +209,9 @@ tmu1: timer@ffd81000 { compatible = "renesas,tmu-r8a7778", "renesas,tmu"; reg = <0xffd81000 0x30>; - interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>, - <0 37 IRQ_TYPE_LEVEL_HIGH>, - <0 38 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_TMU1>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -223,9 +224,9 @@ tmu2: timer@ffd82000 { compatible = "renesas,tmu-r8a7778", "renesas,tmu"; reg = <0xffd82000 0x30>; - interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>, - <0 41 IRQ_TYPE_LEVEL_HIGH>, - <0 42 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_TMU2>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -285,72 +286,84 @@ }; rcar_sound,ssi { - ssi3: ssi@3 { interrupts = <0 0x85 IRQ_TYPE_LEVEL_HIGH>; }; - ssi4: ssi@4 { interrupts = <0 0x85 IRQ_TYPE_LEVEL_HIGH>; }; - ssi5: ssi@5 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; }; - ssi6: ssi@6 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; }; - ssi7: ssi@7 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; }; - ssi8: ssi@8 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; }; - ssi9: ssi@9 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi3: ssi@3 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; }; + ssi4: ssi@4 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; }; + ssi5: ssi@5 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi6: ssi@6 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi7: ssi@7 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi8: ssi@8 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi9: ssi@9 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; }; }; scif0: serial@ffe40000 { - compatible = "renesas,scif-r8a7778", "renesas,scif"; + compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe40000 0x100>; - interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7778_CLK_SCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF0>, + <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif1: serial@ffe41000 { - compatible = "renesas,scif-r8a7778", "renesas,scif"; + compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe41000 0x100>; - interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7778_CLK_SCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF1>, + <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif2: serial@ffe42000 { - compatible = "renesas,scif-r8a7778", "renesas,scif"; + compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe42000 0x100>; - interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7778_CLK_SCIF2>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF2>, + <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif3: serial@ffe43000 { - compatible = "renesas,scif-r8a7778", "renesas,scif"; + compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe43000 0x100>; - interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7778_CLK_SCIF3>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF3>, + <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif4: serial@ffe44000 { - compatible = "renesas,scif-r8a7778", "renesas,scif"; + compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe44000 0x100>; - interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7778_CLK_SCIF4>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF4>, + <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif5: serial@ffe45000 { - compatible = "renesas,scif-r8a7778", "renesas,scif"; + compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe45000 0x100>; - interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7778_CLK_SCIF5>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_SCIF5>, + <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -358,7 +371,7 @@ mmcif: mmc@ffe4e000 { compatible = "renesas,sh-mmcif"; reg = <0xffe4e000 0x100>; - interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7778_CLK_MMC>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -367,7 +380,7 @@ sdhi0: sd@ffe4c000 { compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4c000 0x100>; - interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7778_CLK_SDHI0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -376,7 +389,7 @@ sdhi1: sd@ffe4d000 { compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4d000 0x100>; - interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7778_CLK_SDHI1>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -385,7 +398,7 @@ sdhi2: sd@ffe4f000 { compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4f000 0x100>; - interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7778_CLK_SDHI2>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -394,7 +407,7 @@ hspi0: spi@fffc7000 { compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc7000 0x18>; - interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_HSPI>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -405,7 +418,7 @@ hspi1: spi@fffc8000 { compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc8000 0x18>; - interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_HSPI>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -416,7 +429,7 @@ hspi2: spi@fffc6000 { compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc6000 0x18>; - interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_HSPI>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -437,6 +450,15 @@ clock-output-names = "extal"; }; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + status = "disabled"; + }; + /* Special CPG clocks */ cpg_clocks: cpg_clocks@ffc80000 { compatible = "renesas,r8a7778-cpg-clocks"; diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index fe396c8d58db..e111d35d02ae 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -165,6 +165,9 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + du_pins: du { du0 { renesas,groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0"; @@ -176,6 +179,11 @@ }; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk_b"; + renesas,function = "scif_clk"; + }; + ethernet_pins: ethernet { intc { renesas,groups = "intc_irq1_b"; @@ -222,6 +230,11 @@ status = "okay"; }; +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 6afa909865b5..a0cc08e6295b 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -74,7 +74,7 @@ gpio0: gpio@ffc40000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc40000 0x2c>; - interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; @@ -85,7 +85,7 @@ gpio1: gpio@ffc41000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc41000 0x2c>; - interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 32 32>; @@ -96,7 +96,7 @@ gpio2: gpio@ffc42000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc42000 0x2c>; - interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 64 32>; @@ -107,7 +107,7 @@ gpio3: gpio@ffc43000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc43000 0x2c>; - interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; @@ -118,7 +118,7 @@ gpio4: gpio@ffc44000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc44000 0x2c>; - interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 128 32>; @@ -129,7 +129,7 @@ gpio5: gpio@ffc45000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc45000 0x2c>; - interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 160 32>; @@ -140,7 +140,7 @@ gpio6: gpio@ffc46000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc46000 0x2c>; - interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 192 9>; @@ -159,10 +159,10 @@ <0xfe780044 4>, <0xfe780064 4>, <0xfe780000 4>; - interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH - 0 28 IRQ_TYPE_LEVEL_HIGH - 0 29 IRQ_TYPE_LEVEL_HIGH - 0 30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; sense-bitfield-width = <2>; }; @@ -171,7 +171,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc70000 0x1000>; - interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -182,7 +182,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc71000 0x1000>; - interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C1>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -193,7 +193,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc72000 0x1000>; - interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C2>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -204,68 +204,80 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc73000 0x1000>; - interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C3>; power-domains = <&cpg_clocks>; status = "disabled"; }; scif0: serial@ffe40000 { - compatible = "renesas,scif-r8a7779", "renesas,scif"; + compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe40000 0x100>; - interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7779_CLK_SCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF0>, + <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif1: serial@ffe41000 { - compatible = "renesas,scif-r8a7779", "renesas,scif"; + compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe41000 0x100>; - interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7779_CLK_SCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF1>, + <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif2: serial@ffe42000 { - compatible = "renesas,scif-r8a7779", "renesas,scif"; + compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe42000 0x100>; - interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7779_CLK_SCIF2>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF2>, + <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif3: serial@ffe43000 { - compatible = "renesas,scif-r8a7779", "renesas,scif"; + compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe43000 0x100>; - interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7779_CLK_SCIF3>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF3>, + <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif4: serial@ffe44000 { - compatible = "renesas,scif-r8a7779", "renesas,scif"; + compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe44000 0x100>; - interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7779_CLK_SCIF4>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF4>, + <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; scif5: serial@ffe45000 { - compatible = "renesas,scif-r8a7779", "renesas,scif"; + compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif", + "renesas,scif"; reg = <0xffe45000 0x100>; - interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7779_CLK_SCIF5>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF5>, + <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -283,9 +295,9 @@ tmu0: timer@ffd80000 { compatible = "renesas,tmu-r8a7779", "renesas,tmu"; reg = <0xffd80000 0x30>; - interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>, - <0 33 IRQ_TYPE_LEVEL_HIGH>, - <0 34 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_TMU0>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -298,9 +310,9 @@ tmu1: timer@ffd81000 { compatible = "renesas,tmu-r8a7779", "renesas,tmu"; reg = <0xffd81000 0x30>; - interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>, - <0 37 IRQ_TYPE_LEVEL_HIGH>, - <0 38 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_TMU1>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -313,9 +325,9 @@ tmu2: timer@ffd82000 { compatible = "renesas,tmu-r8a7779", "renesas,tmu"; reg = <0xffd82000 0x30>; - interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>, - <0 41 IRQ_TYPE_LEVEL_HIGH>, - <0 42 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_TMU2>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -328,7 +340,7 @@ sata: sata@fc600000 { compatible = "renesas,sata-r8a7779", "renesas,rcar-sata"; reg = <0xfc600000 0x2000>; - interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7779_CLK_SATA>; power-domains = <&cpg_clocks>; }; @@ -336,7 +348,7 @@ sdhi0: sd@ffe4c000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4c000 0x100>; - interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -345,7 +357,7 @@ sdhi1: sd@ffe4d000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4d000 0x100>; - interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI1>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -354,7 +366,7 @@ sdhi2: sd@ffe4e000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4e000 0x100>; - interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI2>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -363,7 +375,7 @@ sdhi3: sd@ffe4f000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4f000 0x100>; - interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI3>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -372,7 +384,7 @@ hspi0: spi@fffc7000 { compatible = "renesas,hspi-r8a7779", "renesas,hspi"; reg = <0xfffc7000 0x18>; - interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&mstp0_clks R8A7779_CLK_HSPI>; @@ -383,7 +395,7 @@ hspi1: spi@fffc8000 { compatible = "renesas,hspi-r8a7779", "renesas,hspi"; reg = <0xfffc8000 0x18>; - interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&mstp0_clks R8A7779_CLK_HSPI>; @@ -394,7 +406,7 @@ hspi2: spi@fffc6000 { compatible = "renesas,hspi-r8a7779", "renesas,hspi"; reg = <0xfffc6000 0x18>; - interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&mstp0_clks R8A7779_CLK_HSPI>; @@ -405,7 +417,7 @@ du: display@fff80000 { compatible = "renesas,du-r8a7779"; reg = <0 0xfff80000 0 0x40000>; - interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7779_CLK_DU>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -441,6 +453,15 @@ clock-output-names = "extal"; }; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + status = "disabled"; + }; + /* Special CPG clocks */ cpg_clocks: clocks@ffc80000 { compatible = "renesas,r8a7779-cpg-clocks"; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 052dcee4790d..aa6ca92a9485 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -3,6 +3,7 @@ * * Copyright (C) 2013-2014 Renesas Solutions Corp. * Copyright (C) 2014 Cogent Embedded, Inc. + * Copyright (C) 2015-2016 Renesas Electronics Corporation * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -49,6 +50,7 @@ aliases { serial0 = &scif0; serial1 = &scifa1; + i2c8 = "i2cexio"; }; chosen { @@ -252,6 +254,23 @@ #clock-cells = <0>; clock-frequency = <148500000>; }; + + /* + * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. + * We use the I2C demuxer, so the desired IP core can be selected at runtime + * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0). + * Note: For testing the I2C slave feature, it is convenient to connect this + * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and + * instantiate the slave device at runtime according to the documentation. + * You can then communicate with the slave via IIC3. + */ + i2cexio: i2c@8 { + compatible = "i2c-demux-pinctrl"; + i2c-parent = <&iic0>, <&i2c0>; + i2c-bus-name = "i2c-exio"; + #address-cells = <1>; + #size-cells = <0>; + }; }; &du { @@ -291,6 +310,9 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + du_pins: du { renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0"; renesas,function = "du"; @@ -301,6 +323,11 @@ renesas,function = "scif0"; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk"; + renesas,function = "scif_clk"; + }; + ether_pins: ether { renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; renesas,function = "eth"; @@ -342,6 +369,11 @@ renesas,function = "msiof1"; }; + i2c0_pins: i2c0 { + renesas,groups = "i2c0"; + renesas,function = "i2c0"; + }; + iic0_pins: iic0 { renesas,groups = "iic0"; renesas,function = "iic0"; @@ -485,6 +517,11 @@ status = "okay"; }; +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + &msiof1 { pinctrl-0 = <&msiof1_pins>; pinctrl-names = "default"; @@ -524,10 +561,14 @@ cpu0-supply = <&vdd_dvfs>; }; +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "i2c-exio"; +}; + &iic0 { - status = "okay"; pinctrl-0 = <&iic0_pins>; - pinctrl-names = "default"; + pinctrl-names = "i2c-exio"; }; &iic1 { diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 7dfd393bfc7e..38b706399a6b 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -52,6 +52,7 @@ voltage-tolerance = <1>; /* 1% */ clocks = <&cpg_clocks R8A7790_CLK_Z>; clock-latency = <300000>; /* 300 us */ + next-level-cache = <&L2_CA15>; /* kHz - uV - OPPs unknown yet */ operating-points = <1400000 1000000>, @@ -67,6 +68,7 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1300000000>; + next-level-cache = <&L2_CA15>; }; cpu2: cpu@2 { @@ -74,6 +76,7 @@ compatible = "arm,cortex-a15"; reg = <2>; clock-frequency = <1300000000>; + next-level-cache = <&L2_CA15>; }; cpu3: cpu@3 { @@ -81,6 +84,7 @@ compatible = "arm,cortex-a15"; reg = <3>; clock-frequency = <1300000000>; + next-level-cache = <&L2_CA15>; }; cpu4: cpu@4 { @@ -88,6 +92,7 @@ compatible = "arm,cortex-a7"; reg = <0x100>; clock-frequency = <780000000>; + next-level-cache = <&L2_CA7>; }; cpu5: cpu@5 { @@ -95,6 +100,7 @@ compatible = "arm,cortex-a7"; reg = <0x101>; clock-frequency = <780000000>; + next-level-cache = <&L2_CA7>; }; cpu6: cpu@6 { @@ -102,6 +108,7 @@ compatible = "arm,cortex-a7"; reg = <0x102>; clock-frequency = <780000000>; + next-level-cache = <&L2_CA7>; }; cpu7: cpu@7 { @@ -109,9 +116,41 @@ compatible = "arm,cortex-a7"; reg = <0x103>; clock-frequency = <780000000>; + next-level-cache = <&L2_CA7>; }; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + }; + }; + }; + + L2_CA15: cache-controller@0 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + }; + + L2_CA7: cache-controller@1 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + }; + gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -121,13 +160,13 @@ <0 0xf1002000 0 0x1000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; - interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6050000 0 0x50>; - interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; @@ -140,7 +179,7 @@ gpio1: gpio@e6051000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6051000 0 0x50>; - interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 32 30>; @@ -153,7 +192,7 @@ gpio2: gpio@e6052000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6052000 0 0x50>; - interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 64 30>; @@ -166,7 +205,7 @@ gpio3: gpio@e6053000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6053000 0 0x50>; - interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; @@ -179,7 +218,7 @@ gpio4: gpio@e6054000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6054000 0 0x50>; - interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 128 32>; @@ -192,7 +231,7 @@ gpio5: gpio@e6055000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6055000 0 0x50>; - interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 160 32>; @@ -202,27 +241,30 @@ power-domains = <&cpg_clocks>; }; - thermal@e61f0000 { - compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal"; + thermal: thermal@e61f0000 { + compatible = "renesas,thermal-r8a7790", + "renesas,rcar-gen2-thermal", + "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks R8A7790_CLK_THERMAL>; power-domains = <&cpg_clocks>; + #thermal-sensor-cells = <0>; }; timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; cmt0: timer@ffca0000 { compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2"; reg = <0 0xffca0000 0 0x1004>; - interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, - <0 143 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_CMT0>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -235,14 +277,14 @@ cmt1: timer@e6130000 { compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2"; reg = <0 0xe6130000 0 0x1004>; - interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, - <0 121 IRQ_TYPE_LEVEL_HIGH>, - <0 122 IRQ_TYPE_LEVEL_HIGH>, - <0 123 IRQ_TYPE_LEVEL_HIGH>, - <0 124 IRQ_TYPE_LEVEL_HIGH>, - <0 125 IRQ_TYPE_LEVEL_HIGH>, - <0 126 IRQ_TYPE_LEVEL_HIGH>, - <0 127 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_CMT1>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -257,10 +299,10 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, - <0 1 IRQ_TYPE_LEVEL_HIGH>, - <0 2 IRQ_TYPE_LEVEL_HIGH>, - <0 3 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7790_CLK_IRQC>; power-domains = <&cpg_clocks>; }; @@ -268,22 +310,22 @@ dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x20000>; - interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH - 0 200 IRQ_TYPE_LEVEL_HIGH - 0 201 IRQ_TYPE_LEVEL_HIGH - 0 202 IRQ_TYPE_LEVEL_HIGH - 0 203 IRQ_TYPE_LEVEL_HIGH - 0 204 IRQ_TYPE_LEVEL_HIGH - 0 205 IRQ_TYPE_LEVEL_HIGH - 0 206 IRQ_TYPE_LEVEL_HIGH - 0 207 IRQ_TYPE_LEVEL_HIGH - 0 208 IRQ_TYPE_LEVEL_HIGH - 0 209 IRQ_TYPE_LEVEL_HIGH - 0 210 IRQ_TYPE_LEVEL_HIGH - 0 211 IRQ_TYPE_LEVEL_HIGH - 0 212 IRQ_TYPE_LEVEL_HIGH - 0 213 IRQ_TYPE_LEVEL_HIGH - 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -299,22 +341,22 @@ dmac1: dma-controller@e6720000 { compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; reg = <0 0xe6720000 0 0x20000>; - interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH - 0 216 IRQ_TYPE_LEVEL_HIGH - 0 217 IRQ_TYPE_LEVEL_HIGH - 0 218 IRQ_TYPE_LEVEL_HIGH - 0 219 IRQ_TYPE_LEVEL_HIGH - 0 308 IRQ_TYPE_LEVEL_HIGH - 0 309 IRQ_TYPE_LEVEL_HIGH - 0 310 IRQ_TYPE_LEVEL_HIGH - 0 311 IRQ_TYPE_LEVEL_HIGH - 0 312 IRQ_TYPE_LEVEL_HIGH - 0 313 IRQ_TYPE_LEVEL_HIGH - 0 314 IRQ_TYPE_LEVEL_HIGH - 0 315 IRQ_TYPE_LEVEL_HIGH - 0 316 IRQ_TYPE_LEVEL_HIGH - 0 317 IRQ_TYPE_LEVEL_HIGH - 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -330,20 +372,20 @@ audma0: dma-controller@ec700000 { compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <0 346 IRQ_TYPE_LEVEL_HIGH - 0 320 IRQ_TYPE_LEVEL_HIGH - 0 321 IRQ_TYPE_LEVEL_HIGH - 0 322 IRQ_TYPE_LEVEL_HIGH - 0 323 IRQ_TYPE_LEVEL_HIGH - 0 324 IRQ_TYPE_LEVEL_HIGH - 0 325 IRQ_TYPE_LEVEL_HIGH - 0 326 IRQ_TYPE_LEVEL_HIGH - 0 327 IRQ_TYPE_LEVEL_HIGH - 0 328 IRQ_TYPE_LEVEL_HIGH - 0 329 IRQ_TYPE_LEVEL_HIGH - 0 330 IRQ_TYPE_LEVEL_HIGH - 0 331 IRQ_TYPE_LEVEL_HIGH - 0 332 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -359,20 +401,20 @@ audma1: dma-controller@ec720000 { compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; reg = <0 0xec720000 0 0x10000>; - interrupts = <0 347 IRQ_TYPE_LEVEL_HIGH - 0 333 IRQ_TYPE_LEVEL_HIGH - 0 334 IRQ_TYPE_LEVEL_HIGH - 0 335 IRQ_TYPE_LEVEL_HIGH - 0 336 IRQ_TYPE_LEVEL_HIGH - 0 337 IRQ_TYPE_LEVEL_HIGH - 0 338 IRQ_TYPE_LEVEL_HIGH - 0 339 IRQ_TYPE_LEVEL_HIGH - 0 340 IRQ_TYPE_LEVEL_HIGH - 0 341 IRQ_TYPE_LEVEL_HIGH - 0 342 IRQ_TYPE_LEVEL_HIGH - 0 343 IRQ_TYPE_LEVEL_HIGH - 0 344 IRQ_TYPE_LEVEL_HIGH - 0 345 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -388,8 +430,8 @@ usb_dmac0: dma-controller@e65a0000 { compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH - 0 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>; power-domains = <&cpg_clocks>; @@ -400,8 +442,8 @@ usb_dmac1: dma-controller@e65b0000 { compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH - 0 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>; power-domains = <&cpg_clocks>; @@ -414,7 +456,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7790"; reg = <0 0xe6508000 0 0x40>; - interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C0>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <110>; @@ -426,7 +468,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7790"; reg = <0 0xe6518000 0 0x40>; - interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C1>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <6>; @@ -438,7 +480,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7790"; reg = <0 0xe6530000 0 0x40>; - interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C2>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <6>; @@ -450,7 +492,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7790"; reg = <0 0xe6540000 0 0x40>; - interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C3>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <110>; @@ -462,7 +504,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; - interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC0>; dmas = <&dmac0 0x61>, <&dmac0 0x62>; dma-names = "tx", "rx"; @@ -475,7 +517,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; - interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC1>; dmas = <&dmac0 0x65>, <&dmac0 0x66>; dma-names = "tx", "rx"; @@ -488,7 +530,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; reg = <0 0xe6520000 0 0x425>; - interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC2>; dmas = <&dmac0 0x69>, <&dmac0 0x6a>; dma-names = "tx", "rx"; @@ -501,7 +543,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x425>; - interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>; dmas = <&dmac0 0x77>, <&dmac0 0x78>; dma-names = "tx", "rx"; @@ -512,7 +554,7 @@ mmcif0: mmc@ee200000 { compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; - interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>; dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; dma-names = "tx", "rx"; @@ -525,7 +567,7 @@ mmcif1: mmc@ee220000 { compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; reg = <0 0xee220000 0 0x80>; - interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>; dmas = <&dmac0 0xe1>, <&dmac0 0xe2>; dma-names = "tx", "rx"; @@ -543,7 +585,7 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee100000 0 0x328>; - interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI0>; dmas = <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx"; @@ -554,7 +596,7 @@ sdhi1: sd@ee120000 { compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee120000 0 0x328>; - interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI1>; dmas = <&dmac1 0xc9>, <&dmac1 0xca>; dma-names = "tx", "rx"; @@ -565,7 +607,7 @@ sdhi2: sd@ee140000 { compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee140000 0 0x100>; - interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI2>; dmas = <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx"; @@ -576,7 +618,7 @@ sdhi3: sd@ee160000 { compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee160000 0 0x100>; - interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI3>; dmas = <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx"; @@ -585,11 +627,12 @@ }; scifa0: serial@e6c40000 { - compatible = "renesas,scifa-r8a7790", "renesas,scifa"; + compatible = "renesas,scifa-r8a7790", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c40000 0 64>; - interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -597,11 +640,12 @@ }; scifa1: serial@e6c50000 { - compatible = "renesas,scifa-r8a7790", "renesas,scifa"; + compatible = "renesas,scifa-r8a7790", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c50000 0 64>; - interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -609,11 +653,12 @@ }; scifa2: serial@e6c60000 { - compatible = "renesas,scifa-r8a7790", "renesas,scifa"; + compatible = "renesas,scifa-r8a7790", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c60000 0 64>; - interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -621,11 +666,12 @@ }; scifb0: serial@e6c20000 { - compatible = "renesas,scifb-r8a7790", "renesas,scifb"; + compatible = "renesas,scifb-r8a7790", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c20000 0 64>; - interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -633,11 +679,12 @@ }; scifb1: serial@e6c30000 { - compatible = "renesas,scifb-r8a7790", "renesas,scifb"; + compatible = "renesas,scifb-r8a7790", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c30000 0 64>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -645,11 +692,12 @@ }; scifb2: serial@e6ce0000 { - compatible = "renesas,scifb-r8a7790", "renesas,scifb"; + compatible = "renesas,scifb-r8a7790", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6ce0000 0 64>; - interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -657,11 +705,13 @@ }; scif0: serial@e6e60000 { - compatible = "renesas,scif-r8a7790", "renesas,scif"; + compatible = "renesas,scif-r8a7790", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e60000 0 64>; - interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7790_CLK_SCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7790_CLK_SCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -669,11 +719,13 @@ }; scif1: serial@e6e68000 { - compatible = "renesas,scif-r8a7790", "renesas,scif"; + compatible = "renesas,scif-r8a7790", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e68000 0 64>; - interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7790_CLK_SCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7790_CLK_SCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -681,11 +733,13 @@ }; hscif0: serial@e62c0000 { - compatible = "renesas,hscif-r8a7790", "renesas,hscif"; + compatible = "renesas,hscif-r8a7790", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c0000 0 96>; - interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -693,11 +747,13 @@ }; hscif1: serial@e62c8000 { - compatible = "renesas,hscif-r8a7790", "renesas,hscif"; + compatible = "renesas,hscif-r8a7790", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c8000 0 96>; - interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -707,7 +763,7 @@ ether: ethernet@ee700000 { compatible = "renesas,ether-r8a7790"; reg = <0 0xee700000 0 0x400>; - interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_ETHER>; power-domains = <&cpg_clocks>; phy-mode = "rmii"; @@ -717,9 +773,10 @@ }; avb: ethernet@e6800000 { - compatible = "renesas,etheravb-r8a7790"; + compatible = "renesas,etheravb-r8a7790", + "renesas,etheravb-rcar-gen2"; reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; - interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -730,7 +787,7 @@ sata0: sata@ee300000 { compatible = "renesas,sata-r8a7790"; reg = <0 0xee300000 0 0x2000>; - interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_SATA0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -739,16 +796,16 @@ sata1: sata@ee500000 { compatible = "renesas,sata-r8a7790"; reg = <0 0xee500000 0 0x2000>; - interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_SATA1>; power-domains = <&cpg_clocks>; status = "disabled"; }; hsusb: usb@e6590000 { - compatible = "renesas,usbhs-r8a7790"; + compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs"; reg = <0 0xe6590000 0 0x100>; - interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; @@ -783,7 +840,7 @@ vin0: video@e6ef0000 { compatible = "renesas,vin-r8a7790"; reg = <0 0xe6ef0000 0 0x1000>; - interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_VIN0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -792,7 +849,7 @@ vin1: video@e6ef1000 { compatible = "renesas,vin-r8a7790"; reg = <0 0xe6ef1000 0 0x1000>; - interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_VIN1>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -801,7 +858,7 @@ vin2: video@e6ef2000 { compatible = "renesas,vin-r8a7790"; reg = <0 0xe6ef2000 0 0x1000>; - interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_VIN2>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -810,7 +867,7 @@ vin3: video@e6ef3000 { compatible = "renesas,vin-r8a7790"; reg = <0 0xe6ef3000 0 0x1000>; - interrupts = <0 191 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_VIN3>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -819,7 +876,7 @@ vsp1@fe920000 { compatible = "renesas,vsp1"; reg = <0 0xfe920000 0 0x8000>; - interrupts = <0 266 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>; power-domains = <&cpg_clocks>; @@ -832,7 +889,7 @@ vsp1@fe928000 { compatible = "renesas,vsp1"; reg = <0 0xfe928000 0 0x8000>; - interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>; power-domains = <&cpg_clocks>; @@ -846,7 +903,7 @@ vsp1@fe930000 { compatible = "renesas,vsp1"; reg = <0 0xfe930000 0 0x8000>; - interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>; power-domains = <&cpg_clocks>; @@ -860,7 +917,7 @@ vsp1@fe938000 { compatible = "renesas,vsp1"; reg = <0 0xfe938000 0 0x8000>; - interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>; power-domains = <&cpg_clocks>; @@ -877,9 +934,9 @@ <0 0xfeb90000 0 0x1c>, <0 0xfeb94000 0 0x1c>; reg-names = "du", "lvds.0", "lvds.1"; - interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>, - <0 268 IRQ_TYPE_LEVEL_HIGH>, - <0 269 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_DU0>, <&mstp7_clks R8A7790_CLK_DU1>, <&mstp7_clks R8A7790_CLK_DU2>, @@ -913,7 +970,7 @@ can0: can@e6e80000 { compatible = "renesas,can-r8a7790"; reg = <0 0xe6e80000 0 0x1000>; - interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_RCAN0>, <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; @@ -924,7 +981,7 @@ can1: can@e6e88000 { compatible = "renesas,can-r8a7790"; reg = <0 0xe6e88000 0 0x1000>; - interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_RCAN1>, <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; @@ -935,7 +992,7 @@ jpu: jpeg-codec@fe980000 { compatible = "renesas,jpu-r8a7790"; reg = <0 0xfe980000 0 0x10300>; - interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_JPU>; power-domains = <&cpg_clocks>; }; @@ -986,6 +1043,15 @@ clock-output-names = "audio_clk_c"; }; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + status = "disabled"; + }; + /* External USB clock - can be overridden by the board */ usb_extal_clk: usb_extal_clk { compatible = "fixed-clock"; @@ -1401,7 +1467,7 @@ qspi: spi@e6b10000 { compatible = "renesas,qspi-r8a7790", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; - interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>; dmas = <&dmac0 0x17>, <&dmac0 0x18>; dma-names = "tx", "rx"; @@ -1415,7 +1481,7 @@ msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7790"; reg = <0 0xe6e20000 0 0x0064>; - interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>; dmas = <&dmac0 0x51>, <&dmac0 0x52>; dma-names = "tx", "rx"; @@ -1428,7 +1494,7 @@ msiof1: spi@e6e10000 { compatible = "renesas,msiof-r8a7790"; reg = <0 0xe6e10000 0 0x0064>; - interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>; dmas = <&dmac0 0x55>, <&dmac0 0x56>; dma-names = "tx", "rx"; @@ -1441,7 +1507,7 @@ msiof2: spi@e6e00000 { compatible = "renesas,msiof-r8a7790"; reg = <0 0xe6e00000 0 0x0064>; - interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>; dmas = <&dmac0 0x41>, <&dmac0 0x42>; dma-names = "tx", "rx"; @@ -1454,7 +1520,7 @@ msiof3: spi@e6c90000 { compatible = "renesas,msiof-r8a7790"; reg = <0 0xe6c90000 0 0x0064>; - interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>; dmas = <&dmac0 0x45>, <&dmac0 0x46>; dma-names = "tx", "rx"; @@ -1467,7 +1533,7 @@ xhci: usb@ee000000 { compatible = "renesas,xhci-r8a7790"; reg = <0 0xee000000 0 0xc00>; - interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SSUSB>; power-domains = <&cpg_clocks>; phys = <&usb2 1>; @@ -1476,11 +1542,11 @@ }; pci0: pci@ee090000 { - compatible = "renesas,pci-r8a7790"; + compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2"; device_type = "pci"; reg = <0 0xee090000 0 0xc00>, <0 0xee080000 0 0x1100>; - interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_EHCI>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -1491,9 +1557,9 @@ #interrupt-cells = <1>; ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; usb@0,1 { reg = <0x800 0 0 0 0>; @@ -1511,11 +1577,11 @@ }; pci1: pci@ee0b0000 { - compatible = "renesas,pci-r8a7790"; + compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2"; device_type = "pci"; reg = <0 0xee0b0000 0 0xc00>, <0 0xee0a0000 0 0x1100>; - interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_EHCI>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -1526,19 +1592,19 @@ #interrupt-cells = <1>; ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>; interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; }; pci2: pci@ee0d0000 { - compatible = "renesas,pci-r8a7790"; + compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2"; device_type = "pci"; clocks = <&mstp7_clks R8A7790_CLK_EHCI>; power-domains = <&cpg_clocks>; reg = <0 0xee0d0000 0 0xc00>, <0 0xee0c0000 0 0x1100>; - interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; bus-range = <2 2>; @@ -1547,9 +1613,9 @@ #interrupt-cells = <1>; ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; usb@0,1 { reg = <0x800 0 0 0 0>; @@ -1567,7 +1633,7 @@ }; pciec: pcie@fe000000 { - compatible = "renesas,pcie-r8a7790"; + compatible = "renesas,pcie-r8a7790", "renesas,pcie-rcar-gen2"; reg = <0 0xfe000000 0 0x80000>; #address-cells = <3>; #size-cells = <2>; @@ -1580,12 +1646,12 @@ /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000 0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>; - interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>, - <0 117 IRQ_TYPE_LEVEL_HIGH>, - <0 118 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; power-domains = <&cpg_clocks>; @@ -1664,52 +1730,52 @@ rcar_sound,src { src0: src@0 { - interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; src1: src@1 { - interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x87>, <&audma1 0x9c>; dma-names = "rx", "tx"; }; src2: src@2 { - interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x89>, <&audma1 0x9e>; dma-names = "rx", "tx"; }; src3: src@3 { - interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8b>, <&audma1 0xa0>; dma-names = "rx", "tx"; }; src4: src@4 { - interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8d>, <&audma1 0xb0>; dma-names = "rx", "tx"; }; src5: src@5 { - interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8f>, <&audma1 0xb2>; dma-names = "rx", "tx"; }; src6: src@6 { - interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x91>, <&audma1 0xb4>; dma-names = "rx", "tx"; }; src7: src@7 { - interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x93>, <&audma1 0xb6>; dma-names = "rx", "tx"; }; src8: src@8 { - interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x95>, <&audma1 0xb8>; dma-names = "rx", "tx"; }; src9: src@9 { - interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x97>, <&audma1 0xba>; dma-names = "rx", "tx"; }; @@ -1717,52 +1783,52 @@ rcar_sound,ssi { ssi0: ssi@0 { - interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi1: ssi@1 { - interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi2: ssi@2 { - interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi3: ssi@3 { - interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi4: ssi@4 { - interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi5: ssi@5 { - interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi6: ssi@6 { - interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi7: ssi@7 { - interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi8: ssi@8 { - interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi9: ssi@9 { - interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; dma-names = "rx", "tx", "rxu", "txu"; }; @@ -1772,8 +1838,8 @@ ipmmu_sy0: mmu@e6280000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; - interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>, - <0 224 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1781,7 +1847,7 @@ ipmmu_sy1: mmu@e6290000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; - interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1789,8 +1855,8 @@ ipmmu_ds: mmu@e6740000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; - interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, - <0 199 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1798,7 +1864,7 @@ ipmmu_mp: mmu@ec680000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; - interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1806,8 +1872,8 @@ ipmmu_mx: mmu@fe951000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; - interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, - <0 221 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1815,7 +1881,7 @@ ipmmu_rt: mmu@ffc80000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xffc80000 0 0x1000>; - interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 45256f3cc835..0ad71b81d3a2 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -320,6 +320,9 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + i2c2_pins: i2c2 { renesas,groups = "i2c2"; renesas,function = "i2c2"; @@ -340,6 +343,11 @@ renesas,function = "scif1"; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk"; + renesas,function = "scif_clk"; + }; + ether_pins: ether { renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; renesas,function = "eth"; @@ -440,6 +448,11 @@ status = "okay"; }; +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index 01d239c3eaaa..6c08314427d6 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -8,6 +8,17 @@ * kind, whether express or implied. */ +/* + * SSI-AK4642 + * + * JP3: 2-1: AK4642 + * 2-3: ADV7511 + * + * This command is required before playback/capture: + * + * amixer set "LINEOUT Mixer DACL" on + */ + /dts-v1/; #include "r8a7791.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -78,6 +89,53 @@ states = <3300000 1 1800000 0>; }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + x3_clk: x3-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; + + x16_clk: x16-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; + + x14_clk: x14-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + clock-output-names = "audio_clock"; + }; + + sound { + compatible = "simple-audio-card"; + + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&soundcodec>; + simple-audio-card,frame-master = <&soundcodec>; + + simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + soundcodec: simple-audio-card,codec { + sound-dai = <&ak4642>; + clocks = <&x14_clk>; + }; + }; }; &extal_clk { @@ -85,11 +143,19 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + scif0_pins: serial0 { renesas,groups = "scif0_data_d"; renesas,function = "scif0"; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk"; + renesas,function = "scif_clk"; + }; + ether_pins: ether { renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; renesas,function = "eth"; @@ -139,6 +205,21 @@ renesas,groups = "can0_data"; renesas,function = "can0"; }; + + du_pins: du { + renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + renesas,function = "du"; + }; + + ssi_pins: sound { + renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; + renesas,function = "ssi"; + }; + + audio_clk_pins: audio_clk { + renesas,groups = "audio_clk_a"; + renesas,function = "audio_clk"; + }; }; &scif0 { @@ -148,6 +229,11 @@ status = "okay"; }; +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + ðer { pinctrl-0 = <ðer_pins &phy1_pins>; pinctrl-names = "default"; @@ -229,6 +315,12 @@ status = "okay"; clock-frequency = <400000>; + ak4642: codec@12 { + compatible = "asahi-kasei,ak4642"; + #sound-dai-cells = <0>; + reg = <0x12>; + }; + composite-in@20 { compatible = "adi,adv7180"; reg = <0x20>; @@ -241,6 +333,38 @@ }; }; }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio3>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; }; &sata0 { @@ -303,3 +427,44 @@ status = "okay"; }; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&mstp7_clks R8A7791_CLK_DU0>, + <&mstp7_clks R8A7791_CLK_DU1>, + <&mstp7_clks R8A7791_CLK_LVDS0>, + <&x3_clk>, <&x16_clk>; + clock-names = "du.0", "du.1", "lvds.0", + "dclkin.0", "dclkin.1"; + + ports { + port@1 { + endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; +}; + +&rcar_sound { + pinctrl-0 = <&ssi_pins &audio_clk_pins>; + pinctrl-names = "default"; + status = "okay"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + rcar_sound,dai { + dai0 { + playback = <&ssi0>; + capture = <&ssi1>; + }; + }; +}; + +&ssi1 { + shared-pin; +}; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 2a369ddcb6fd..6439f0569fe2 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -51,6 +51,7 @@ voltage-tolerance = <1>; /* 1% */ clocks = <&cpg_clocks R8A7791_CLK_Z>; clock-latency = <300000>; /* 300 us */ + next-level-cache = <&L2_CA15>; /* kHz - uV - OPPs unknown yet */ operating-points = <1500000 1000000>, @@ -66,9 +67,35 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1500000000>; + next-level-cache = <&L2_CA15>; }; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + }; + }; + }; + + L2_CA15: cache-controller@0 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + }; + gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -78,13 +105,13 @@ <0 0xf1002000 0 0x1000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; - interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; }; gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; reg = <0 0xe6050000 0 0x50>; - interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; @@ -97,7 +124,7 @@ gpio1: gpio@e6051000 { compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; reg = <0 0xe6051000 0 0x50>; - interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 32 26>; @@ -110,7 +137,7 @@ gpio2: gpio@e6052000 { compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; reg = <0 0xe6052000 0 0x50>; - interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 64 32>; @@ -123,7 +150,7 @@ gpio3: gpio@e6053000 { compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; reg = <0 0xe6053000 0 0x50>; - interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; @@ -136,7 +163,7 @@ gpio4: gpio@e6054000 { compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; reg = <0 0xe6054000 0 0x50>; - interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 128 32>; @@ -149,7 +176,7 @@ gpio5: gpio@e6055000 { compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; reg = <0 0xe6055000 0 0x50>; - interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 160 32>; @@ -162,7 +189,7 @@ gpio6: gpio@e6055400 { compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; reg = <0 0xe6055400 0 0x50>; - interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 192 32>; @@ -175,7 +202,7 @@ gpio7: gpio@e6055800 { compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; reg = <0 0xe6055800 0 0x50>; - interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 224 26>; @@ -185,27 +212,30 @@ power-domains = <&cpg_clocks>; }; - thermal@e61f0000 { - compatible = "renesas,thermal-r8a7791", "renesas,rcar-thermal"; + thermal: thermal@e61f0000 { + compatible = "renesas,thermal-r8a7791", + "renesas,rcar-gen2-thermal", + "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks R8A7791_CLK_THERMAL>; power-domains = <&cpg_clocks>; + #thermal-sensor-cells = <0>; }; timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; cmt0: timer@ffca0000 { compatible = "renesas,cmt-48-r8a7791", "renesas,cmt-48-gen2"; reg = <0 0xffca0000 0 0x1004>; - interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, - <0 143 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_CMT0>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -218,14 +248,14 @@ cmt1: timer@e6130000 { compatible = "renesas,cmt-48-r8a7791", "renesas,cmt-48-gen2"; reg = <0 0xe6130000 0 0x1004>; - interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, - <0 121 IRQ_TYPE_LEVEL_HIGH>, - <0 122 IRQ_TYPE_LEVEL_HIGH>, - <0 123 IRQ_TYPE_LEVEL_HIGH>, - <0 124 IRQ_TYPE_LEVEL_HIGH>, - <0 125 IRQ_TYPE_LEVEL_HIGH>, - <0 126 IRQ_TYPE_LEVEL_HIGH>, - <0 127 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_CMT1>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -240,16 +270,16 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, - <0 1 IRQ_TYPE_LEVEL_HIGH>, - <0 2 IRQ_TYPE_LEVEL_HIGH>, - <0 3 IRQ_TYPE_LEVEL_HIGH>, - <0 12 IRQ_TYPE_LEVEL_HIGH>, - <0 13 IRQ_TYPE_LEVEL_HIGH>, - <0 14 IRQ_TYPE_LEVEL_HIGH>, - <0 15 IRQ_TYPE_LEVEL_HIGH>, - <0 16 IRQ_TYPE_LEVEL_HIGH>, - <0 17 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7791_CLK_IRQC>; power-domains = <&cpg_clocks>; }; @@ -257,22 +287,22 @@ dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x20000>; - interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH - 0 200 IRQ_TYPE_LEVEL_HIGH - 0 201 IRQ_TYPE_LEVEL_HIGH - 0 202 IRQ_TYPE_LEVEL_HIGH - 0 203 IRQ_TYPE_LEVEL_HIGH - 0 204 IRQ_TYPE_LEVEL_HIGH - 0 205 IRQ_TYPE_LEVEL_HIGH - 0 206 IRQ_TYPE_LEVEL_HIGH - 0 207 IRQ_TYPE_LEVEL_HIGH - 0 208 IRQ_TYPE_LEVEL_HIGH - 0 209 IRQ_TYPE_LEVEL_HIGH - 0 210 IRQ_TYPE_LEVEL_HIGH - 0 211 IRQ_TYPE_LEVEL_HIGH - 0 212 IRQ_TYPE_LEVEL_HIGH - 0 213 IRQ_TYPE_LEVEL_HIGH - 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -288,22 +318,22 @@ dmac1: dma-controller@e6720000 { compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac"; reg = <0 0xe6720000 0 0x20000>; - interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH - 0 216 IRQ_TYPE_LEVEL_HIGH - 0 217 IRQ_TYPE_LEVEL_HIGH - 0 218 IRQ_TYPE_LEVEL_HIGH - 0 219 IRQ_TYPE_LEVEL_HIGH - 0 308 IRQ_TYPE_LEVEL_HIGH - 0 309 IRQ_TYPE_LEVEL_HIGH - 0 310 IRQ_TYPE_LEVEL_HIGH - 0 311 IRQ_TYPE_LEVEL_HIGH - 0 312 IRQ_TYPE_LEVEL_HIGH - 0 313 IRQ_TYPE_LEVEL_HIGH - 0 314 IRQ_TYPE_LEVEL_HIGH - 0 315 IRQ_TYPE_LEVEL_HIGH - 0 316 IRQ_TYPE_LEVEL_HIGH - 0 317 IRQ_TYPE_LEVEL_HIGH - 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -319,20 +349,20 @@ audma0: dma-controller@ec700000 { compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <0 346 IRQ_TYPE_LEVEL_HIGH - 0 320 IRQ_TYPE_LEVEL_HIGH - 0 321 IRQ_TYPE_LEVEL_HIGH - 0 322 IRQ_TYPE_LEVEL_HIGH - 0 323 IRQ_TYPE_LEVEL_HIGH - 0 324 IRQ_TYPE_LEVEL_HIGH - 0 325 IRQ_TYPE_LEVEL_HIGH - 0 326 IRQ_TYPE_LEVEL_HIGH - 0 327 IRQ_TYPE_LEVEL_HIGH - 0 328 IRQ_TYPE_LEVEL_HIGH - 0 329 IRQ_TYPE_LEVEL_HIGH - 0 330 IRQ_TYPE_LEVEL_HIGH - 0 331 IRQ_TYPE_LEVEL_HIGH - 0 332 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -348,20 +378,20 @@ audma1: dma-controller@ec720000 { compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac"; reg = <0 0xec720000 0 0x10000>; - interrupts = <0 347 IRQ_TYPE_LEVEL_HIGH - 0 333 IRQ_TYPE_LEVEL_HIGH - 0 334 IRQ_TYPE_LEVEL_HIGH - 0 335 IRQ_TYPE_LEVEL_HIGH - 0 336 IRQ_TYPE_LEVEL_HIGH - 0 337 IRQ_TYPE_LEVEL_HIGH - 0 338 IRQ_TYPE_LEVEL_HIGH - 0 339 IRQ_TYPE_LEVEL_HIGH - 0 340 IRQ_TYPE_LEVEL_HIGH - 0 341 IRQ_TYPE_LEVEL_HIGH - 0 342 IRQ_TYPE_LEVEL_HIGH - 0 343 IRQ_TYPE_LEVEL_HIGH - 0 344 IRQ_TYPE_LEVEL_HIGH - 0 345 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -377,8 +407,8 @@ usb_dmac0: dma-controller@e65a0000 { compatible = "renesas,r8a7791-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH - 0 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7791_CLK_USBDMAC0>; power-domains = <&cpg_clocks>; @@ -389,8 +419,8 @@ usb_dmac1: dma-controller@e65b0000 { compatible = "renesas,r8a7791-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH - 0 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7791_CLK_USBDMAC1>; power-domains = <&cpg_clocks>; @@ -404,7 +434,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7791"; reg = <0 0xe6508000 0 0x40>; - interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C0>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <6>; @@ -416,7 +446,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7791"; reg = <0 0xe6518000 0 0x40>; - interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C1>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <6>; @@ -428,7 +458,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7791"; reg = <0 0xe6530000 0 0x40>; - interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C2>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <6>; @@ -440,7 +470,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7791"; reg = <0 0xe6540000 0 0x40>; - interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C3>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <6>; @@ -452,7 +482,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7791"; reg = <0 0xe6520000 0 0x40>; - interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C4>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <6>; @@ -465,7 +495,7 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7791"; reg = <0 0xe6528000 0 0x40>; - interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C5>; power-domains = <&cpg_clocks>; i2c-scl-internal-delay-ns = <110>; @@ -478,7 +508,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x425>; - interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>; dmas = <&dmac0 0x77>, <&dmac0 0x78>; dma-names = "tx", "rx"; @@ -491,7 +521,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; - interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_IIC0>; dmas = <&dmac0 0x61>, <&dmac0 0x62>; dma-names = "tx", "rx"; @@ -504,7 +534,7 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; - interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_IIC1>; dmas = <&dmac0 0x65>, <&dmac0 0x66>; dma-names = "tx", "rx"; @@ -520,7 +550,7 @@ mmcif0: mmc@ee200000 { compatible = "renesas,mmcif-r8a7791", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; - interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>; dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; dma-names = "tx", "rx"; @@ -533,7 +563,7 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee100000 0 0x328>; - interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI0>; dmas = <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx"; @@ -544,7 +574,7 @@ sdhi1: sd@ee140000 { compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee140000 0 0x100>; - interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI1>; dmas = <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx"; @@ -555,7 +585,7 @@ sdhi2: sd@ee160000 { compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee160000 0 0x100>; - interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI2>; dmas = <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx"; @@ -564,11 +594,12 @@ }; scifa0: serial@e6c40000 { - compatible = "renesas,scifa-r8a7791", "renesas,scifa"; + compatible = "renesas,scifa-r8a7791", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c40000 0 64>; - interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -576,11 +607,12 @@ }; scifa1: serial@e6c50000 { - compatible = "renesas,scifa-r8a7791", "renesas,scifa"; + compatible = "renesas,scifa-r8a7791", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c50000 0 64>; - interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -588,11 +620,12 @@ }; scifa2: serial@e6c60000 { - compatible = "renesas,scifa-r8a7791", "renesas,scifa"; + compatible = "renesas,scifa-r8a7791", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c60000 0 64>; - interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -600,11 +633,12 @@ }; scifa3: serial@e6c70000 { - compatible = "renesas,scifa-r8a7791", "renesas,scifa"; + compatible = "renesas,scifa-r8a7791", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c70000 0 64>; - interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -612,11 +646,12 @@ }; scifa4: serial@e6c78000 { - compatible = "renesas,scifa-r8a7791", "renesas,scifa"; + compatible = "renesas,scifa-r8a7791", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c78000 0 64>; - interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1f>, <&dmac0 0x20>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -624,11 +659,12 @@ }; scifa5: serial@e6c80000 { - compatible = "renesas,scifa-r8a7791", "renesas,scifa"; + compatible = "renesas,scifa-r8a7791", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c80000 0 64>; - interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x23>, <&dmac0 0x24>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -636,11 +672,12 @@ }; scifb0: serial@e6c20000 { - compatible = "renesas,scifb-r8a7791", "renesas,scifb"; + compatible = "renesas,scifb-r8a7791", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c20000 0 64>; - interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -648,11 +685,12 @@ }; scifb1: serial@e6c30000 { - compatible = "renesas,scifb-r8a7791", "renesas,scifb"; + compatible = "renesas,scifb-r8a7791", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c30000 0 64>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -660,11 +698,12 @@ }; scifb2: serial@e6ce0000 { - compatible = "renesas,scifb-r8a7791", "renesas,scifb"; + compatible = "renesas,scifb-r8a7791", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6ce0000 0 64>; - interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -672,11 +711,13 @@ }; scif0: serial@e6e60000 { - compatible = "renesas,scif-r8a7791", "renesas,scif"; + compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e60000 0 64>; - interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_SCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_SCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -684,11 +725,13 @@ }; scif1: serial@e6e68000 { - compatible = "renesas,scif-r8a7791", "renesas,scif"; + compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e68000 0 64>; - interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_SCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_SCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -696,11 +739,13 @@ }; scif2: serial@e6e58000 { - compatible = "renesas,scif-r8a7791", "renesas,scif"; + compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e58000 0 64>; - interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_SCIF2>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_SCIF2>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -708,11 +753,13 @@ }; scif3: serial@e6ea8000 { - compatible = "renesas,scif-r8a7791", "renesas,scif"; + compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ea8000 0 64>; - interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_SCIF3>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_SCIF3>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -720,11 +767,13 @@ }; scif4: serial@e6ee0000 { - compatible = "renesas,scif-r8a7791", "renesas,scif"; + compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ee0000 0 64>; - interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_SCIF4>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_SCIF4>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -732,11 +781,13 @@ }; scif5: serial@e6ee8000 { - compatible = "renesas,scif-r8a7791", "renesas,scif"; + compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ee8000 0 64>; - interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_SCIF5>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_SCIF5>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -744,11 +795,13 @@ }; hscif0: serial@e62c0000 { - compatible = "renesas,hscif-r8a7791", "renesas,hscif"; + compatible = "renesas,hscif-r8a7791", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c0000 0 96>; - interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -756,11 +809,13 @@ }; hscif1: serial@e62c8000 { - compatible = "renesas,hscif-r8a7791", "renesas,hscif"; + compatible = "renesas,hscif-r8a7791", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c8000 0 96>; - interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -768,11 +823,13 @@ }; hscif2: serial@e62d0000 { - compatible = "renesas,hscif-r8a7791", "renesas,hscif"; + compatible = "renesas,hscif-r8a7791", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62d0000 0 96>; - interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -782,7 +839,7 @@ ether: ethernet@ee700000 { compatible = "renesas,ether-r8a7791"; reg = <0 0xee700000 0 0x400>; - interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_ETHER>; power-domains = <&cpg_clocks>; phy-mode = "rmii"; @@ -795,7 +852,7 @@ compatible = "renesas,etheravb-r8a7791", "renesas,etheravb-rcar-gen2"; reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; - interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_ETHERAVB>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -806,7 +863,7 @@ sata0: sata@ee300000 { compatible = "renesas,sata-r8a7791"; reg = <0 0xee300000 0 0x2000>; - interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_SATA0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -815,16 +872,16 @@ sata1: sata@ee500000 { compatible = "renesas,sata-r8a7791"; reg = <0 0xee500000 0 0x2000>; - interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_SATA1>; power-domains = <&cpg_clocks>; status = "disabled"; }; hsusb: usb@e6590000 { - compatible = "renesas,usbhs-r8a7791"; + compatible = "renesas,usbhs-r8a7791", "renesas,rcar-gen2-usbhs"; reg = <0 0xe6590000 0 0x100>; - interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_HSUSB>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; @@ -859,7 +916,7 @@ vin0: video@e6ef0000 { compatible = "renesas,vin-r8a7791"; reg = <0 0xe6ef0000 0 0x1000>; - interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_VIN0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -868,7 +925,7 @@ vin1: video@e6ef1000 { compatible = "renesas,vin-r8a7791"; reg = <0 0xe6ef1000 0 0x1000>; - interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_VIN1>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -877,7 +934,7 @@ vin2: video@e6ef2000 { compatible = "renesas,vin-r8a7791"; reg = <0 0xe6ef2000 0 0x1000>; - interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_VIN2>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -886,7 +943,7 @@ vsp1@fe928000 { compatible = "renesas,vsp1"; reg = <0 0xfe928000 0 0x8000>; - interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>; power-domains = <&cpg_clocks>; @@ -900,7 +957,7 @@ vsp1@fe930000 { compatible = "renesas,vsp1"; reg = <0 0xfe930000 0 0x8000>; - interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>; power-domains = <&cpg_clocks>; @@ -914,7 +971,7 @@ vsp1@fe938000 { compatible = "renesas,vsp1"; reg = <0 0xfe938000 0 0x8000>; - interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>; power-domains = <&cpg_clocks>; @@ -930,8 +987,8 @@ reg = <0 0xfeb00000 0 0x40000>, <0 0xfeb90000 0 0x1c>; reg-names = "du", "lvds.0"; - interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>, - <0 268 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_DU0>, <&mstp7_clks R8A7791_CLK_DU1>, <&mstp7_clks R8A7791_CLK_LVDS0>; @@ -958,7 +1015,7 @@ can0: can@e6e80000 { compatible = "renesas,can-r8a7791"; reg = <0 0xe6e80000 0 0x1000>; - interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_RCAN0>, <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; @@ -969,7 +1026,7 @@ can1: can@e6e88000 { compatible = "renesas,can-r8a7791"; reg = <0 0xe6e88000 0 0x1000>; - interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_RCAN1>, <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; @@ -980,7 +1037,7 @@ jpu: jpeg-codec@fe980000 { compatible = "renesas,jpu-r8a7791"; reg = <0 0xfe980000 0 0x10300>; - interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_JPU>; power-domains = <&cpg_clocks>; }; @@ -1031,6 +1088,15 @@ status = "disabled"; }; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + status = "disabled"; + }; + /* External USB clock - can be overridden by the board */ usb_extal_clk: usb_extal_clk { compatible = "fixed-clock"; @@ -1432,7 +1498,7 @@ qspi: spi@e6b10000 { compatible = "renesas,qspi-r8a7791", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; - interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>; dmas = <&dmac0 0x17>, <&dmac0 0x18>; dma-names = "tx", "rx"; @@ -1446,7 +1512,7 @@ msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7791"; reg = <0 0xe6e20000 0 0x0064>; - interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; dmas = <&dmac0 0x51>, <&dmac0 0x52>; dma-names = "tx", "rx"; @@ -1459,7 +1525,7 @@ msiof1: spi@e6e10000 { compatible = "renesas,msiof-r8a7791"; reg = <0 0xe6e10000 0 0x0064>; - interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>; dmas = <&dmac0 0x55>, <&dmac0 0x56>; dma-names = "tx", "rx"; @@ -1472,7 +1538,7 @@ msiof2: spi@e6e00000 { compatible = "renesas,msiof-r8a7791"; reg = <0 0xe6e00000 0 0x0064>; - interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>; dmas = <&dmac0 0x41>, <&dmac0 0x42>; dma-names = "tx", "rx"; @@ -1485,7 +1551,7 @@ xhci: usb@ee000000 { compatible = "renesas,xhci-r8a7791"; reg = <0 0xee000000 0 0xc00>; - interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SSUSB>; power-domains = <&cpg_clocks>; phys = <&usb2 1>; @@ -1494,11 +1560,11 @@ }; pci0: pci@ee090000 { - compatible = "renesas,pci-r8a7791"; + compatible = "renesas,pci-r8a7791", "renesas,pci-rcar-gen2"; device_type = "pci"; reg = <0 0xee090000 0 0xc00>, <0 0xee080000 0 0x1100>; - interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_EHCI>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -1509,9 +1575,9 @@ #interrupt-cells = <1>; ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; usb@0,1 { reg = <0x800 0 0 0 0>; @@ -1529,11 +1595,11 @@ }; pci1: pci@ee0d0000 { - compatible = "renesas,pci-r8a7791"; + compatible = "renesas,pci-r8a7791", "renesas,pci-rcar-gen2"; device_type = "pci"; reg = <0 0xee0d0000 0 0xc00>, <0 0xee0c0000 0 0x1100>; - interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_EHCI>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -1544,9 +1610,9 @@ #interrupt-cells = <1>; ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; usb@0,1 { reg = <0x800 0 0 0 0>; @@ -1564,7 +1630,7 @@ }; pciec: pcie@fe000000 { - compatible = "renesas,pcie-r8a7791"; + compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2"; reg = <0 0xfe000000 0 0x80000>; #address-cells = <3>; #size-cells = <2>; @@ -1577,12 +1643,12 @@ /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000 0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>; - interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>, - <0 117 IRQ_TYPE_LEVEL_HIGH>, - <0 118 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_PCIEC>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; power-domains = <&cpg_clocks>; @@ -1592,8 +1658,8 @@ ipmmu_sy0: mmu@e6280000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; - interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>, - <0 224 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1601,7 +1667,7 @@ ipmmu_sy1: mmu@e6290000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; - interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1609,8 +1675,8 @@ ipmmu_ds: mmu@e6740000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; - interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, - <0 199 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1618,7 +1684,7 @@ ipmmu_mp: mmu@ec680000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; - interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1626,8 +1692,8 @@ ipmmu_mx: mmu@fe951000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; - interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, - <0 221 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1635,7 +1701,7 @@ ipmmu_rt: mmu@ffc80000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xffc80000 0 0x1000>; - interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1643,8 +1709,8 @@ ipmmu_gp: mmu@e62a0000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; - interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>, - <0 261 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1721,52 +1787,52 @@ rcar_sound,src { src0: src@0 { - interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; src1: src@1 { - interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x87>, <&audma1 0x9c>; dma-names = "rx", "tx"; }; src2: src@2 { - interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x89>, <&audma1 0x9e>; dma-names = "rx", "tx"; }; src3: src@3 { - interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8b>, <&audma1 0xa0>; dma-names = "rx", "tx"; }; src4: src@4 { - interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8d>, <&audma1 0xb0>; dma-names = "rx", "tx"; }; src5: src@5 { - interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8f>, <&audma1 0xb2>; dma-names = "rx", "tx"; }; src6: src@6 { - interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x91>, <&audma1 0xb4>; dma-names = "rx", "tx"; }; src7: src@7 { - interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x93>, <&audma1 0xb6>; dma-names = "rx", "tx"; }; src8: src@8 { - interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x95>, <&audma1 0xb8>; dma-names = "rx", "tx"; }; src9: src@9 { - interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x97>, <&audma1 0xba>; dma-names = "rx", "tx"; }; @@ -1774,52 +1840,52 @@ rcar_sound,ssi { ssi0: ssi@0 { - interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi1: ssi@1 { - interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi2: ssi@2 { - interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi3: ssi@3 { - interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi4: ssi@4 { - interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi5: ssi@5 { - interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi6: ssi@6 { - interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi7: ssi@7 { - interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi8: ssi@8 { - interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi9: ssi@9 { - interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; dma-names = "rx", "tx", "rxu", "txu"; }; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index baa59fe84298..87e89ec9dd47 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -8,6 +8,34 @@ * kind, whether express or implied. */ +/* + * SSI-AK4643 + * + * SW1: 1: AK4643 + * 2: CN22 + * 3: ADV7511 + * + * This command is required when Playback/Capture + * + * amixer set "LINEOUT Mixer DACL" on + * amixer set "DVC Out" 100% + * amixer set "DVC In" 100% + * + * You can use Mute + * + * amixer set "DVC Out Mute" on + * amixer set "DVC In Mute" on + * + * You can use Volume Ramp + * + * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" + * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" + * amixer set "DVC Out Ramp" on + * aplay xxx.wav & + * amixer set "DVC Out" 80% // Volume Down + * amixer set "DVC Out" 100% // Volume Up + */ + /dts-v1/; #include "r8a7793.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -31,6 +59,176 @@ device_type = "memory"; reg = <0 0x40000000 0 0x40000000>; }; + + gpio-keys { + compatible = "gpio-keys"; + + key-1 { + gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "SW2-1"; + wakeup-source; + debounce-interval = <20>; + }; + key-2 { + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "SW2-2"; + wakeup-source; + debounce-interval = <20>; + }; + key-3 { + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW2-3"; + wakeup-source; + debounce-interval = <20>; + }; + key-4 { + gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_4>; + label = "SW2-4"; + wakeup-source; + debounce-interval = <20>; + }; + key-a { + gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_A>; + label = "SW30"; + wakeup-source; + debounce-interval = <20>; + }; + key-b { + gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_B>; + label = "SW31"; + wakeup-source; + debounce-interval = <20>; + }; + key-c { + gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_C>; + label = "SW32"; + wakeup-source; + debounce-interval = <20>; + }; + key-d { + gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_D>; + label = "SW33"; + wakeup-source; + debounce-interval = <20>; + }; + key-e { + gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_E>; + label = "SW34"; + wakeup-source; + debounce-interval = <20>; + }; + key-f { + gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_F>; + label = "SW35"; + wakeup-source; + debounce-interval = <20>; + }; + key-g { + gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_G>; + label = "SW36"; + wakeup-source; + debounce-interval = <20>; + }; + }; + + leds { + compatible = "gpio-leds"; + led6 { + gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; + label = "LED6"; + }; + led7 { + gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + label = "LED7"; + }; + led8 { + gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; + label = "LED8"; + }; + }; + + audio_clock: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + clock-output-names = "audio_clock"; + }; + + rsnd_ak4643: sound { + compatible = "simple-audio-card"; + + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcodec>; + simple-audio-card,frame-master = <&sndcodec>; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&ak4643>; + clocks = <&audio_clock>; + }; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + x2_clk: x2-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; + + x13_clk: x13-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&mstp7_clks R8A7793_CLK_DU0>, + <&mstp7_clks R8A7793_CLK_DU1>, + <&mstp7_clks R8A7793_CLK_LVDS0>, + <&x13_clk>, <&x2_clk>; + clock-names = "du.0", "du.1", "lvds.0", + "dclkin.0", "dclkin.1"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + port@1 { + lvds_connector: endpoint { + }; + }; + }; }; &extal_clk { @@ -38,6 +236,19 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + i2c2_pins: i2c2 { + renesas,groups = "i2c2"; + renesas,function = "i2c2"; + }; + + du_pins: du { + renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + renesas,function = "du"; + }; + scif0_pins: serial0 { renesas,groups = "scif0_data_d"; renesas,function = "scif0"; @@ -48,6 +259,11 @@ renesas,function = "scif1"; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk"; + renesas,function = "scif_clk"; + }; + ether_pins: ether { renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; renesas,function = "eth"; @@ -62,6 +278,16 @@ renesas,groups = "qspi_ctrl", "qspi_data4"; renesas,function = "qspi"; }; + + sound_pins: sound { + renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; + renesas,function = "ssi"; + }; + + sound_clk_pins: sound_clk { + renesas,groups = "audio_clk_a"; + renesas,function = "audio_clk"; + }; }; ðer { @@ -98,6 +324,11 @@ status = "okay"; }; +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + &qspi { pinctrl-0 = <&qspi_pins>; pinctrl-names = "default"; @@ -136,3 +367,76 @@ }; }; }; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <100000>; + + ak4643: codec@12 { + compatible = "asahi-kasei,ak4643"; + #sound-dai-cells = <0>; + reg = <0x12>; + }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio3>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + + eeprom@50 { + compatible = "renesas,r1ex24002", "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + status = "okay"; + + rcar_sound,dai { + dai0 { + playback = <&ssi0 &src2 &dvc0>; + capture = <&ssi1 &src3 &dvc1>; + }; + }; +}; + +&ssi1 { + shared-pin; +}; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index aef9e69d6c26..b48215945241 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -19,6 +19,15 @@ #size-cells = <2>; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; spi0 = &qspi; }; @@ -42,9 +51,35 @@ < 937500 1000000>, < 750000 1000000>, < 375000 1000000>; + next-level-cache = <&L2_CA15>; }; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + }; + }; + }; + + L2_CA15: cache-controller@0 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + }; + gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -54,13 +89,13 @@ <0 0xf1002000 0 0x1000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; - interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; }; gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; reg = <0 0xe6050000 0 0x50>; - interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; @@ -73,7 +108,7 @@ gpio1: gpio@e6051000 { compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; reg = <0 0xe6051000 0 0x50>; - interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 32 26>; @@ -86,7 +121,7 @@ gpio2: gpio@e6052000 { compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; reg = <0 0xe6052000 0 0x50>; - interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 64 32>; @@ -99,7 +134,7 @@ gpio3: gpio@e6053000 { compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; reg = <0 0xe6053000 0 0x50>; - interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; @@ -112,7 +147,7 @@ gpio4: gpio@e6054000 { compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; reg = <0 0xe6054000 0 0x50>; - interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 128 32>; @@ -125,7 +160,7 @@ gpio5: gpio@e6055000 { compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; reg = <0 0xe6055000 0 0x50>; - interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 160 32>; @@ -138,7 +173,7 @@ gpio6: gpio@e6055400 { compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; reg = <0 0xe6055400 0 0x50>; - interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 192 32>; @@ -151,7 +186,7 @@ gpio7: gpio@e6055800 { compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; reg = <0 0xe6055800 0 0x50>; - interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 224 26>; @@ -161,27 +196,30 @@ power-domains = <&cpg_clocks>; }; - thermal@e61f0000 { - compatible = "renesas,thermal-r8a7793", "renesas,rcar-thermal"; + thermal: thermal@e61f0000 { + compatible = "renesas,thermal-r8a7793", + "renesas,rcar-gen2-thermal", + "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks R8A7793_CLK_THERMAL>; power-domains = <&cpg_clocks>; + #thermal-sensor-cells = <0>; }; timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; cmt0: timer@ffca0000 { compatible = "renesas,cmt-48-r8a7793", "renesas,cmt-48-gen2"; reg = <0 0xffca0000 0 0x1004>; - interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, - <0 143 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7793_CLK_CMT0>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -194,14 +232,14 @@ cmt1: timer@e6130000 { compatible = "renesas,cmt-48-r8a7793", "renesas,cmt-48-gen2"; reg = <0 0xe6130000 0 0x1004>; - interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, - <0 121 IRQ_TYPE_LEVEL_HIGH>, - <0 122 IRQ_TYPE_LEVEL_HIGH>, - <0 123 IRQ_TYPE_LEVEL_HIGH>, - <0 124 IRQ_TYPE_LEVEL_HIGH>, - <0 125 IRQ_TYPE_LEVEL_HIGH>, - <0 126 IRQ_TYPE_LEVEL_HIGH>, - <0 127 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7793_CLK_CMT1>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -216,44 +254,39 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, - <0 1 IRQ_TYPE_LEVEL_HIGH>, - <0 2 IRQ_TYPE_LEVEL_HIGH>, - <0 3 IRQ_TYPE_LEVEL_HIGH>, - <0 12 IRQ_TYPE_LEVEL_HIGH>, - <0 13 IRQ_TYPE_LEVEL_HIGH>, - <0 14 IRQ_TYPE_LEVEL_HIGH>, - <0 15 IRQ_TYPE_LEVEL_HIGH>, - <0 16 IRQ_TYPE_LEVEL_HIGH>, - <0 17 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7793_CLK_IRQC>; power-domains = <&cpg_clocks>; }; - pfc: pfc@e6060000 { - compatible = "renesas,pfc-r8a7793"; - reg = <0 0xe6060000 0 0x250>; - }; - dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x20000>; - interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH - 0 200 IRQ_TYPE_LEVEL_HIGH - 0 201 IRQ_TYPE_LEVEL_HIGH - 0 202 IRQ_TYPE_LEVEL_HIGH - 0 203 IRQ_TYPE_LEVEL_HIGH - 0 204 IRQ_TYPE_LEVEL_HIGH - 0 205 IRQ_TYPE_LEVEL_HIGH - 0 206 IRQ_TYPE_LEVEL_HIGH - 0 207 IRQ_TYPE_LEVEL_HIGH - 0 208 IRQ_TYPE_LEVEL_HIGH - 0 209 IRQ_TYPE_LEVEL_HIGH - 0 210 IRQ_TYPE_LEVEL_HIGH - 0 211 IRQ_TYPE_LEVEL_HIGH - 0 212 IRQ_TYPE_LEVEL_HIGH - 0 213 IRQ_TYPE_LEVEL_HIGH - 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -269,22 +302,22 @@ dmac1: dma-controller@e6720000 { compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac"; reg = <0 0xe6720000 0 0x20000>; - interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH - 0 216 IRQ_TYPE_LEVEL_HIGH - 0 217 IRQ_TYPE_LEVEL_HIGH - 0 218 IRQ_TYPE_LEVEL_HIGH - 0 219 IRQ_TYPE_LEVEL_HIGH - 0 308 IRQ_TYPE_LEVEL_HIGH - 0 309 IRQ_TYPE_LEVEL_HIGH - 0 310 IRQ_TYPE_LEVEL_HIGH - 0 311 IRQ_TYPE_LEVEL_HIGH - 0 312 IRQ_TYPE_LEVEL_HIGH - 0 313 IRQ_TYPE_LEVEL_HIGH - 0 314 IRQ_TYPE_LEVEL_HIGH - 0 315 IRQ_TYPE_LEVEL_HIGH - 0 316 IRQ_TYPE_LEVEL_HIGH - 0 317 IRQ_TYPE_LEVEL_HIGH - 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -297,12 +330,190 @@ dma-channels = <15>; }; + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC0>; + clock-names = "fck"; + power-domains = <&cpg_clocks>; + #dma-cells = <1>; + dma-channels = <13>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC1>; + clock-names = "fck"; + power-domains = <&cpg_clocks>; + #dma-cells = <1>; + dma-channels = <13>; + }; + + /* The memory map in the User's Manual maps the cores to bus numbers */ + i2c0: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7793"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7793_CLK_I2C0>; + power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c1: i2c@e6518000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7793"; + reg = <0 0xe6518000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7793_CLK_I2C1>; + power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6530000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7793"; + reg = <0 0xe6530000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7793_CLK_I2C2>; + power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e6540000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7793"; + reg = <0 0xe6540000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7793_CLK_I2C3>; + power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c4: i2c@e6520000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7793"; + reg = <0 0xe6520000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7793_CLK_I2C4>; + power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c5: i2c@e6528000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7793"; + reg = <0 0xe6528000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7793_CLK_I2C5>; + power-domains = <&cpg_clocks>; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c6: i2c@e60b0000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>; + dmas = <&dmac0 0x77>, <&dmac0 0x78>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + i2c7: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7793_CLK_IIC0>; + dmas = <&dmac0 0x61>, <&dmac0 0x62>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + i2c8: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7793_CLK_IIC1>; + dmas = <&dmac0 0x65>, <&dmac0 0x66>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + pfc: pfc@e6060000 { + compatible = "renesas,pfc-r8a7793"; + reg = <0 0xe6060000 0 0x250>; + }; + scifa0: serial@e6c40000 { - compatible = "renesas,scifa-r8a7793", "renesas,scifa"; + compatible = "renesas,scifa-r8a7793", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c40000 0 64>; - interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -310,11 +521,12 @@ }; scifa1: serial@e6c50000 { - compatible = "renesas,scifa-r8a7793", "renesas,scifa"; + compatible = "renesas,scifa-r8a7793", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c50000 0 64>; - interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -322,11 +534,12 @@ }; scifa2: serial@e6c60000 { - compatible = "renesas,scifa-r8a7793", "renesas,scifa"; + compatible = "renesas,scifa-r8a7793", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c60000 0 64>; - interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFA2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -334,11 +547,12 @@ }; scifa3: serial@e6c70000 { - compatible = "renesas,scifa-r8a7793", "renesas,scifa"; + compatible = "renesas,scifa-r8a7793", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c70000 0 64>; - interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7793_CLK_SCIFA3>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -346,11 +560,12 @@ }; scifa4: serial@e6c78000 { - compatible = "renesas,scifa-r8a7793", "renesas,scifa"; + compatible = "renesas,scifa-r8a7793", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c78000 0 64>; - interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7793_CLK_SCIFA4>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1f>, <&dmac0 0x20>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -358,11 +573,12 @@ }; scifa5: serial@e6c80000 { - compatible = "renesas,scifa-r8a7793", "renesas,scifa"; + compatible = "renesas,scifa-r8a7793", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c80000 0 64>; - interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7793_CLK_SCIFA5>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x23>, <&dmac0 0x24>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -370,11 +586,12 @@ }; scifb0: serial@e6c20000 { - compatible = "renesas,scifb-r8a7793", "renesas,scifb"; + compatible = "renesas,scifb-r8a7793", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c20000 0 64>; - interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -382,11 +599,12 @@ }; scifb1: serial@e6c30000 { - compatible = "renesas,scifb-r8a7793", "renesas,scifb"; + compatible = "renesas,scifb-r8a7793", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c30000 0 64>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -394,11 +612,12 @@ }; scifb2: serial@e6ce0000 { - compatible = "renesas,scifb-r8a7793", "renesas,scifb"; + compatible = "renesas,scifb-r8a7793", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6ce0000 0 64>; - interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -406,11 +625,13 @@ }; scif0: serial@e6e60000 { - compatible = "renesas,scif-r8a7793", "renesas,scif"; + compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e60000 0 64>; - interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_SCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_SCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -418,11 +639,13 @@ }; scif1: serial@e6e68000 { - compatible = "renesas,scif-r8a7793", "renesas,scif"; + compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e68000 0 64>; - interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_SCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_SCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -430,11 +653,13 @@ }; scif2: serial@e6e58000 { - compatible = "renesas,scif-r8a7793", "renesas,scif"; + compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e58000 0 64>; - interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_SCIF2>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_SCIF2>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -442,11 +667,13 @@ }; scif3: serial@e6ea8000 { - compatible = "renesas,scif-r8a7793", "renesas,scif"; + compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ea8000 0 64>; - interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_SCIF3>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_SCIF3>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -454,11 +681,13 @@ }; scif4: serial@e6ee0000 { - compatible = "renesas,scif-r8a7793", "renesas,scif"; + compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ee0000 0 64>; - interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_SCIF4>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_SCIF4>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -466,11 +695,13 @@ }; scif5: serial@e6ee8000 { - compatible = "renesas,scif-r8a7793", "renesas,scif"; + compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ee8000 0 64>; - interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_SCIF5>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_SCIF5>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -478,11 +709,13 @@ }; hscif0: serial@e62c0000 { - compatible = "renesas,hscif-r8a7793", "renesas,hscif"; + compatible = "renesas,hscif-r8a7793", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c0000 0 96>; - interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -490,11 +723,13 @@ }; hscif1: serial@e62c8000 { - compatible = "renesas,hscif-r8a7793", "renesas,hscif"; + compatible = "renesas,hscif-r8a7793", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c8000 0 96>; - interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -502,11 +737,13 @@ }; hscif2: serial@e62d0000 { - compatible = "renesas,hscif-r8a7793", "renesas,hscif"; + compatible = "renesas,hscif-r8a7793", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62d0000 0 96>; - interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -516,7 +753,7 @@ ether: ethernet@ee700000 { compatible = "renesas,ether-r8a7793"; reg = <0 0xee700000 0 0x400>; - interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7793_CLK_ETHER>; power-domains = <&cpg_clocks>; phy-mode = "rmii"; @@ -528,7 +765,7 @@ qspi: spi@e6b10000 { compatible = "renesas,qspi-r8a7793", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; - interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_QSPI_MOD>; dmas = <&dmac0 0x17>, <&dmac0 0x18>; dma-names = "tx", "rx"; @@ -544,8 +781,8 @@ reg = <0 0xfeb00000 0 0x40000>, <0 0xfeb90000 0 0x1c>; reg-names = "du", "lvds.0"; - interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>, - <0 268 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7793_CLK_DU0>, <&mstp7_clks R8A7793_CLK_DU1>, <&mstp7_clks R8A7793_CLK_LVDS0>; @@ -583,6 +820,38 @@ clock-output-names = "extal"; }; + /* + * The external audio clocks are configured as 0 Hz fixed frequency clocks by + * default. Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "audio_clk_a"; + }; + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "audio_clk_b"; + }; + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "audio_clk_c"; + }; + + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + status = "disabled"; + }; + /* Special CPG clocks */ cpg_clocks: cpg_clocks@e6150000 { compatible = "renesas,r8a7793-cpg-clocks", @@ -671,6 +940,14 @@ clock-mult = <1>; clock-output-names = "p"; }; + m2_clk: m2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7793_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "m2"; + }; rclk_clk: rclk_clk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; @@ -770,10 +1047,11 @@ mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; - clocks = <&extal_clk>; + clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>; #clock-cells = <1>; - clock-indices = <R8A7793_CLK_THERMAL>; - clock-output-names = "thermal"; + clock-indices = <R8A7793_CLK_AUDIO_DMAC0 R8A7793_CLK_AUDIO_DMAC1 + R8A7793_CLK_THERMAL>; + clock-output-names = "audmac0", "audmac1", "thermal"; }; mstp7_clks: mstp7_clks@e615014c { compatible = "renesas,r8a7793-mstp-clocks", @@ -820,19 +1098,61 @@ reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, - <&cpg_clocks R8A7793_CLK_QSPI>; + <&cpg_clocks R8A7793_CLK_QSPI>, <&hp_clk>, + <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, + <&hp_clk>, <&hp_clk>; #clock-cells = <1>; clock-indices = < R8A7793_CLK_GPIO7 R8A7793_CLK_GPIO6 R8A7793_CLK_GPIO5 R8A7793_CLK_GPIO4 R8A7793_CLK_GPIO3 R8A7793_CLK_GPIO2 R8A7793_CLK_GPIO1 R8A7793_CLK_GPIO0 - R8A7793_CLK_QSPI_MOD + R8A7793_CLK_QSPI_MOD R8A7793_CLK_I2C5 + R8A7793_CLK_IICDVFS R8A7793_CLK_I2C4 + R8A7793_CLK_I2C3 R8A7793_CLK_I2C2 + R8A7793_CLK_I2C1 R8A7793_CLK_I2C0 >; clock-output-names = "gpio7", "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0", - "qspi_mod"; + "qspi_mod", "i2c5", "i2c6", "i2c4", + "i2c3", "i2c2", "i2c1", "i2c0"; + }; + mstp10_clks: mstp10_clks@e6150998 { + compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>; + clocks = <&p_clk>, + <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&p_clk>, + <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, + <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, + <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, + <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, + <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, + <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>, + <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>; + + #clock-cells = <1>; + clock-indices = < + R8A7793_CLK_SSI_ALL + R8A7793_CLK_SSI9 R8A7793_CLK_SSI8 R8A7793_CLK_SSI7 R8A7793_CLK_SSI6 R8A7793_CLK_SSI5 + R8A7793_CLK_SSI4 R8A7793_CLK_SSI3 R8A7793_CLK_SSI2 R8A7793_CLK_SSI1 R8A7793_CLK_SSI0 + R8A7793_CLK_SCU_ALL + R8A7793_CLK_SCU_DVC1 R8A7793_CLK_SCU_DVC0 + R8A7793_CLK_SCU_CTU1_MIX1 R8A7793_CLK_SCU_CTU0_MIX0 + R8A7793_CLK_SCU_SRC9 R8A7793_CLK_SCU_SRC8 R8A7793_CLK_SCU_SRC7 R8A7793_CLK_SCU_SRC6 R8A7793_CLK_SCU_SRC5 + R8A7793_CLK_SCU_SRC4 R8A7793_CLK_SCU_SRC3 R8A7793_CLK_SCU_SRC2 R8A7793_CLK_SCU_SRC1 R8A7793_CLK_SCU_SRC0 + >; + clock-output-names = + "ssi-all", + "ssi9", "ssi8", "ssi7", "ssi6", "ssi5", + "ssi4", "ssi3", "ssi2", "ssi1", "ssi0", + "scu-all", + "scu-dvc1", "scu-dvc0", + "scu-ctu1-mix1", "scu-ctu0-mix0", + "scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5", + "scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0"; }; mstp11_clks: mstp11_clks@e615099c { compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -849,8 +1169,8 @@ ipmmu_sy0: mmu@e6280000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; - interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>, - <0 224 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -858,7 +1178,7 @@ ipmmu_sy1: mmu@e6290000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; - interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -866,8 +1186,8 @@ ipmmu_ds: mmu@e6740000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; - interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, - <0 199 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -875,7 +1195,7 @@ ipmmu_mp: mmu@ec680000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; - interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -883,8 +1203,8 @@ ipmmu_mx: mmu@fe951000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; - interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, - <0 221 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -892,7 +1212,7 @@ ipmmu_rt: mmu@ffc80000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xffc80000 0 0x1000>; - interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -900,9 +1220,166 @@ ipmmu_gp: mmu@e62a0000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; - interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>, - <0 261 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; + + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a7793", "renesas,rcar_sound-gen2"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&mstp10_clks R8A7793_CLK_SSI_ALL>, + <&mstp10_clks R8A7793_CLK_SSI9>, <&mstp10_clks R8A7793_CLK_SSI8>, + <&mstp10_clks R8A7793_CLK_SSI7>, <&mstp10_clks R8A7793_CLK_SSI6>, + <&mstp10_clks R8A7793_CLK_SSI5>, <&mstp10_clks R8A7793_CLK_SSI4>, + <&mstp10_clks R8A7793_CLK_SSI3>, <&mstp10_clks R8A7793_CLK_SSI2>, + <&mstp10_clks R8A7793_CLK_SSI1>, <&mstp10_clks R8A7793_CLK_SSI0>, + <&mstp10_clks R8A7793_CLK_SCU_SRC9>, <&mstp10_clks R8A7793_CLK_SCU_SRC8>, + <&mstp10_clks R8A7793_CLK_SCU_SRC7>, <&mstp10_clks R8A7793_CLK_SCU_SRC6>, + <&mstp10_clks R8A7793_CLK_SCU_SRC5>, <&mstp10_clks R8A7793_CLK_SCU_SRC4>, + <&mstp10_clks R8A7793_CLK_SCU_SRC3>, <&mstp10_clks R8A7793_CLK_SCU_SRC2>, + <&mstp10_clks R8A7793_CLK_SCU_SRC1>, <&mstp10_clks R8A7793_CLK_SCU_SRC0>, + <&mstp10_clks R8A7793_CLK_SCU_DVC0>, <&mstp10_clks R8A7793_CLK_SCU_DVC1>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", + "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", "src.5", + "src.4", "src.3", "src.2", "src.1", "src.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&cpg_clocks>; + + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc@0 { + dmas = <&audma0 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc@1 { + dmas = <&audma0 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,src { + src0: src@0 { + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src@1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src@2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src@3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src@4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src@5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src@6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src@7 { + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src@8 { + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src@9 { + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi@0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi@1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi@2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi@3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi@4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi@5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi@6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi@7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi@8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi@9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index 2394e4883786..ca9bc4fff287 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -103,6 +103,9 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + du_pins: du { renesas,groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_dotclkout0"; renesas,function = "du"; @@ -113,6 +116,11 @@ renesas,function = "scif2"; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk"; + renesas,function = "scif_clk"; + }; + ether_pins: ether { renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; renesas,function = "eth"; @@ -138,6 +146,13 @@ status = "okay"; }; +&pfc { + qspi_pins: spi0 { + renesas,groups = "qspi_ctrl", "qspi_data4"; + renesas,function = "qspi"; + }; +}; + ðer { pinctrl-0 = <ðer_pins &phy1_pins>; pinctrl-names = "default"; @@ -197,3 +212,47 @@ status = "okay"; }; + +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spansion,s25fl512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <30000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + spi-cpol; + spi-cpha; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "loader"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "system"; + reg = <0x00040000 0x00040000>; + read-only; + }; + partition@80000 { + label = "user"; + reg = <0x00080000 0x03f80000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index 5153e3af25d9..66f077a3ca41 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -64,6 +64,61 @@ states = <3300000 1 1800000 0>; }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb1>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; + + x2_clk: x2-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; + + x3_clk: x3-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; }; &extal_clk { @@ -71,11 +126,19 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + scif2_pins: serial2 { renesas,groups = "scif2_data"; renesas,function = "scif2"; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk"; + renesas,function = "scif_clk"; + }; + ether_pins: ether { renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; renesas,function = "eth"; @@ -129,6 +192,11 @@ status = "okay"; }; +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + ðer { pinctrl-0 = <ðer_pins &phy1_pins>; pinctrl-names = "default"; @@ -164,6 +232,38 @@ }; }; }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio5>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_rgb0>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; }; &mmcif0 { @@ -258,3 +358,25 @@ &usbphy { status = "okay"; }; + +&du { + status = "okay"; + + clocks = <&mstp7_clks R8A7794_CLK_DU0>, + <&mstp7_clks R8A7794_CLK_DU0>, + <&x2_clk>, <&x3_clk>; + clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + port@1 { + endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 6c78f1fae90f..eacb2b291361 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -40,6 +40,7 @@ compatible = "arm,cortex-a7"; reg = <0>; clock-frequency = <1000000000>; + next-level-cache = <&L2_CA7>; }; cpu1: cpu@1 { @@ -47,9 +48,16 @@ compatible = "arm,cortex-a7"; reg = <1>; clock-frequency = <1000000000>; + next-level-cache = <&L2_CA7>; }; }; + L2_CA7: cache-controller@1 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + }; + gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -59,13 +67,13 @@ <0 0xf1002000 0 0x1000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; - interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; }; gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; reg = <0 0xe6050000 0 0x50>; - interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; @@ -78,7 +86,7 @@ gpio1: gpio@e6051000 { compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; reg = <0 0xe6051000 0 0x50>; - interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 32 26>; @@ -91,7 +99,7 @@ gpio2: gpio@e6052000 { compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; reg = <0 0xe6052000 0 0x50>; - interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 64 32>; @@ -104,7 +112,7 @@ gpio3: gpio@e6053000 { compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; reg = <0 0xe6053000 0 0x50>; - interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; @@ -117,7 +125,7 @@ gpio4: gpio@e6054000 { compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; reg = <0 0xe6054000 0 0x50>; - interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 128 32>; @@ -130,7 +138,7 @@ gpio5: gpio@e6055000 { compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; reg = <0 0xe6055000 0 0x50>; - interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 160 28>; @@ -143,7 +151,7 @@ gpio6: gpio@e6055400 { compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; reg = <0 0xe6055400 0 0x50>; - interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 192 26>; @@ -156,8 +164,8 @@ cmt0: timer@ffca0000 { compatible = "renesas,cmt-48-gen2"; reg = <0 0xffca0000 0 0x1004>; - interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, - <0 143 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7794_CLK_CMT0>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -170,14 +178,14 @@ cmt1: timer@e6130000 { compatible = "renesas,cmt-48-gen2"; reg = <0 0xe6130000 0 0x1004>; - interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, - <0 121 IRQ_TYPE_LEVEL_HIGH>, - <0 122 IRQ_TYPE_LEVEL_HIGH>, - <0 123 IRQ_TYPE_LEVEL_HIGH>, - <0 124 IRQ_TYPE_LEVEL_HIGH>, - <0 125 IRQ_TYPE_LEVEL_HIGH>, - <0 126 IRQ_TYPE_LEVEL_HIGH>, - <0 127 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_CMT1>; clock-names = "fck"; power-domains = <&cpg_clocks>; @@ -189,10 +197,10 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; irqc0: interrupt-controller@e61c0000 { @@ -200,16 +208,16 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, - <0 1 IRQ_TYPE_LEVEL_HIGH>, - <0 2 IRQ_TYPE_LEVEL_HIGH>, - <0 3 IRQ_TYPE_LEVEL_HIGH>, - <0 12 IRQ_TYPE_LEVEL_HIGH>, - <0 13 IRQ_TYPE_LEVEL_HIGH>, - <0 14 IRQ_TYPE_LEVEL_HIGH>, - <0 15 IRQ_TYPE_LEVEL_HIGH>, - <0 16 IRQ_TYPE_LEVEL_HIGH>, - <0 17 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7794_CLK_IRQC>; power-domains = <&cpg_clocks>; }; @@ -222,22 +230,22 @@ dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x20000>; - interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH - 0 200 IRQ_TYPE_LEVEL_HIGH - 0 201 IRQ_TYPE_LEVEL_HIGH - 0 202 IRQ_TYPE_LEVEL_HIGH - 0 203 IRQ_TYPE_LEVEL_HIGH - 0 204 IRQ_TYPE_LEVEL_HIGH - 0 205 IRQ_TYPE_LEVEL_HIGH - 0 206 IRQ_TYPE_LEVEL_HIGH - 0 207 IRQ_TYPE_LEVEL_HIGH - 0 208 IRQ_TYPE_LEVEL_HIGH - 0 209 IRQ_TYPE_LEVEL_HIGH - 0 210 IRQ_TYPE_LEVEL_HIGH - 0 211 IRQ_TYPE_LEVEL_HIGH - 0 212 IRQ_TYPE_LEVEL_HIGH - 0 213 IRQ_TYPE_LEVEL_HIGH - 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -253,22 +261,22 @@ dmac1: dma-controller@e6720000 { compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac"; reg = <0 0xe6720000 0 0x20000>; - interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH - 0 216 IRQ_TYPE_LEVEL_HIGH - 0 217 IRQ_TYPE_LEVEL_HIGH - 0 218 IRQ_TYPE_LEVEL_HIGH - 0 219 IRQ_TYPE_LEVEL_HIGH - 0 308 IRQ_TYPE_LEVEL_HIGH - 0 309 IRQ_TYPE_LEVEL_HIGH - 0 310 IRQ_TYPE_LEVEL_HIGH - 0 311 IRQ_TYPE_LEVEL_HIGH - 0 312 IRQ_TYPE_LEVEL_HIGH - 0 313 IRQ_TYPE_LEVEL_HIGH - 0 314 IRQ_TYPE_LEVEL_HIGH - 0 315 IRQ_TYPE_LEVEL_HIGH - 0 316 IRQ_TYPE_LEVEL_HIGH - 0 317 IRQ_TYPE_LEVEL_HIGH - 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -282,11 +290,12 @@ }; scifa0: serial@e6c40000 { - compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + compatible = "renesas,scifa-r8a7794", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c40000 0 64>; - interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -294,11 +303,12 @@ }; scifa1: serial@e6c50000 { - compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + compatible = "renesas,scifa-r8a7794", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c50000 0 64>; - interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -306,11 +316,12 @@ }; scifa2: serial@e6c60000 { - compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + compatible = "renesas,scifa-r8a7794", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c60000 0 64>; - interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -318,11 +329,12 @@ }; scifa3: serial@e6c70000 { - compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + compatible = "renesas,scifa-r8a7794", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c70000 0 64>; - interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -330,11 +342,12 @@ }; scifa4: serial@e6c78000 { - compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + compatible = "renesas,scifa-r8a7794", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c78000 0 64>; - interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1f>, <&dmac0 0x20>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -342,11 +355,12 @@ }; scifa5: serial@e6c80000 { - compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + compatible = "renesas,scifa-r8a7794", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c80000 0 64>; - interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x23>, <&dmac0 0x24>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -354,11 +368,12 @@ }; scifb0: serial@e6c20000 { - compatible = "renesas,scifb-r8a7794", "renesas,scifb"; + compatible = "renesas,scifb-r8a7794", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c20000 0 64>; - interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -366,11 +381,12 @@ }; scifb1: serial@e6c30000 { - compatible = "renesas,scifb-r8a7794", "renesas,scifb"; + compatible = "renesas,scifb-r8a7794", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6c30000 0 64>; - interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -378,11 +394,12 @@ }; scifb2: serial@e6ce0000 { - compatible = "renesas,scifb-r8a7794", "renesas,scifb"; + compatible = "renesas,scifb-r8a7794", + "renesas,rcar-gen2-scifb", "renesas,scifb"; reg = <0 0xe6ce0000 0 64>; - interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -390,11 +407,13 @@ }; scif0: serial@e6e60000 { - compatible = "renesas,scif-r8a7794", "renesas,scif"; + compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e60000 0 64>; - interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_SCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -402,11 +421,13 @@ }; scif1: serial@e6e68000 { - compatible = "renesas,scif-r8a7794", "renesas,scif"; + compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e68000 0 64>; - interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_SCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -414,11 +435,13 @@ }; scif2: serial@e6e58000 { - compatible = "renesas,scif-r8a7794", "renesas,scif"; + compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6e58000 0 64>; - interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_SCIF2>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF2>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -426,11 +449,13 @@ }; scif3: serial@e6ea8000 { - compatible = "renesas,scif-r8a7794", "renesas,scif"; + compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ea8000 0 64>; - interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_SCIF3>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF3>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -438,11 +463,13 @@ }; scif4: serial@e6ee0000 { - compatible = "renesas,scif-r8a7794", "renesas,scif"; + compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ee0000 0 64>; - interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_SCIF4>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF4>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -450,11 +477,13 @@ }; scif5: serial@e6ee8000 { - compatible = "renesas,scif-r8a7794", "renesas,scif"; + compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif", + "renesas,scif"; reg = <0 0xe6ee8000 0 64>; - interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_SCIF5>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF5>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -462,11 +491,13 @@ }; hscif0: serial@e62c0000 { - compatible = "renesas,hscif-r8a7794", "renesas,hscif"; + compatible = "renesas,hscif-r8a7794", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c0000 0 96>; - interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -474,11 +505,13 @@ }; hscif1: serial@e62c8000 { - compatible = "renesas,hscif-r8a7794", "renesas,hscif"; + compatible = "renesas,hscif-r8a7794", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62c8000 0 96>; - interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -486,11 +519,13 @@ }; hscif2: serial@e62d0000 { - compatible = "renesas,hscif-r8a7794", "renesas,hscif"; + compatible = "renesas,hscif-r8a7794", + "renesas,rcar-gen2-hscif", "renesas,hscif"; reg = <0 0xe62d0000 0 96>; - interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>; - clock-names = "sci_ick"; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; dma-names = "tx", "rx"; power-domains = <&cpg_clocks>; @@ -500,7 +535,7 @@ ether: ethernet@ee700000 { compatible = "renesas,ether-r8a7794"; reg = <0 0xee700000 0 0x400>; - interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7794_CLK_ETHER>; power-domains = <&cpg_clocks>; phy-mode = "rmii"; @@ -509,11 +544,23 @@ status = "disabled"; }; + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a7794", + "renesas,etheravb-rcar-gen2"; + reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7794_CLK_ETHERAVB>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + /* The memory map in the User's Manual maps the cores to bus numbers */ i2c0: i2c@e6508000 { compatible = "renesas,i2c-r8a7794"; reg = <0 0xe6508000 0 0x40>; - interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C0>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -525,7 +572,7 @@ i2c1: i2c@e6518000 { compatible = "renesas,i2c-r8a7794"; reg = <0 0xe6518000 0 0x40>; - interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C1>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -537,7 +584,7 @@ i2c2: i2c@e6530000 { compatible = "renesas,i2c-r8a7794"; reg = <0 0xe6530000 0 0x40>; - interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C2>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -549,7 +596,7 @@ i2c3: i2c@e6540000 { compatible = "renesas,i2c-r8a7794"; reg = <0 0xe6540000 0 0x40>; - interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C3>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -561,7 +608,7 @@ i2c4: i2c@e6520000 { compatible = "renesas,i2c-r8a7794"; reg = <0 0xe6520000 0 0x40>; - interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C4>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -573,7 +620,7 @@ i2c5: i2c@e6528000 { compatible = "renesas,i2c-r8a7794"; reg = <0 0xe6528000 0 0x40>; - interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C5>; power-domains = <&cpg_clocks>; #address-cells = <1>; @@ -585,7 +632,7 @@ mmcif0: mmc@ee200000 { compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; - interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>; dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; dma-names = "tx", "rx"; @@ -597,7 +644,7 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7794"; reg = <0 0xee100000 0 0x200>; - interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_SDHI0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -606,7 +653,7 @@ sdhi1: sd@ee140000 { compatible = "renesas,sdhi-r8a7794"; reg = <0 0xee140000 0 0x100>; - interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_SDHI1>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -615,7 +662,7 @@ sdhi2: sd@ee160000 { compatible = "renesas,sdhi-r8a7794"; reg = <0 0xee160000 0 0x100>; - interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_SDHI2>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -624,7 +671,7 @@ qspi: spi@e6b10000 { compatible = "renesas,qspi-r8a7794", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; - interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>; dmas = <&dmac0 0x17>, <&dmac0 0x18>; dma-names = "tx", "rx"; @@ -638,7 +685,7 @@ vin0: video@e6ef0000 { compatible = "renesas,vin-r8a7794"; reg = <0 0xe6ef0000 0 0x1000>; - interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7794_CLK_VIN0>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -647,18 +694,18 @@ vin1: video@e6ef1000 { compatible = "renesas,vin-r8a7794"; reg = <0 0xe6ef1000 0 0x1000>; - interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7794_CLK_VIN1>; power-domains = <&cpg_clocks>; status = "disabled"; }; pci0: pci@ee090000 { - compatible = "renesas,pci-r8a7794"; + compatible = "renesas,pci-r8a7794", "renesas,pci-rcar-gen2"; device_type = "pci"; reg = <0 0xee090000 0 0xc00>, <0 0xee080000 0 0x1100>; - interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_EHCI>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -669,9 +716,9 @@ #interrupt-cells = <1>; ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; usb@0,1 { reg = <0x800 0 0 0 0>; @@ -689,11 +736,11 @@ }; pci1: pci@ee0d0000 { - compatible = "renesas,pci-r8a7794"; + compatible = "renesas,pci-r8a7794", "renesas,pci-rcar-gen2"; device_type = "pci"; reg = <0 0xee0d0000 0 0xc00>, <0 0xee0c0000 0 0x1100>; - interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_EHCI>; power-domains = <&cpg_clocks>; status = "disabled"; @@ -704,9 +751,9 @@ #interrupt-cells = <1>; ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; usb@0,1 { reg = <0x800 0 0 0 0>; @@ -724,9 +771,9 @@ }; hsusb: usb@e6590000 { - compatible = "renesas,usbhs-r8a7794"; + compatible = "renesas,usbhs-r8a7794", "renesas,rcar-gen2-usbhs"; reg = <0 0xe6590000 0 0x100>; - interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_HSUSB>; power-domains = <&cpg_clocks>; renesas,buswait = <4>; @@ -759,8 +806,8 @@ compatible = "renesas,du-r8a7794"; reg = <0 0xfeb00000 0 0x40000>; reg-names = "du"; - interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>, - <0 268 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_DU0>, <&mstp7_clks R8A7794_CLK_DU0>; clock-names = "du.0", "du.1"; @@ -797,6 +844,15 @@ clock-output-names = "extal"; }; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + status = "disabled"; + }; + /* Special CPG clocks */ cpg_clocks: cpg_clocks@e6150000 { compatible = "renesas,r8a7794-cpg-clocks", @@ -1068,13 +1124,14 @@ mstp8_clks: mstp8_clks@e6150990 { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; - clocks = <&zg_clk>, <&zg_clk>, <&p_clk>; + clocks = <&zg_clk>, <&zg_clk>, <&hp_clk>, <&p_clk>; #clock-cells = <1>; clock-indices = < - R8A7794_CLK_VIN1 R8A7794_CLK_VIN0 R8A7794_CLK_ETHER + R8A7794_CLK_VIN1 R8A7794_CLK_VIN0 + R8A7794_CLK_ETHERAVB R8A7794_CLK_ETHER >; clock-output-names = - "vin1", "vin0", "ether"; + "vin1", "vin0", "etheravb", "ether"; }; mstp9_clks: mstp9_clks@e6150994 { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -1111,8 +1168,8 @@ ipmmu_sy0: mmu@e6280000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; - interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>, - <0 224 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1120,7 +1177,7 @@ ipmmu_sy1: mmu@e6290000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; - interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1128,8 +1185,8 @@ ipmmu_ds: mmu@e6740000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; - interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, - <0 199 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1137,7 +1194,7 @@ ipmmu_mp: mmu@ec680000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; - interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1145,8 +1202,8 @@ ipmmu_mx: mmu@fe951000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; - interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, - <0 221 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; @@ -1154,8 +1211,8 @@ ipmmu_gp: mmu@e62a0000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; - interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>, - <0 261 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts index 28a033666017..b3d6ec87f615 100644 --- a/arch/arm/boot/dts/rk3036-evb.dts +++ b/arch/arm/boot/dts/rk3036-evb.dts @@ -47,6 +47,20 @@ compatible = "rockchip,rk3036-evb", "rockchip,rk3036"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_xfer>, <&emac_mdio>; + phy = <&phy0>; + phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */ + phy-reset-duration = <10>; /* millisecond */ + + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + &i2c1 { status = "okay"; diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index 992f9cadbc04..6251d109eff4 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -46,6 +46,58 @@ model = "Rockchip RK3036 KylinBoard"; compatible = "rockchip,rk3036-kylin", "rockchip,rk3036"; + leds: gpio-leds { + compatible = "gpio-leds"; + + work { + gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + label = "kylin:red:led"; + pinctrl-names = "default"; + pinctrl-0 = <&led_ctl>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_wake_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - SDIO_RESET_L_WL_RST + * - SDIO_RESET_L_BT_EN + */ + reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>, /* WL_REG_ON */ + <&gpio0 27 GPIO_ACTIVE_LOW>, /* WL_RST */ + <&gpio2 9 GPIO_ACTIVE_LOW>; /* BT_EN */ + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "rockchip,rt5616-codec"; + simple-audio-card,mclk-fs = <512>; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "MIC1", "Microphone Jack", + "MIC2", "Microphone Jack", + "Microphone Jack", "micbias1", + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR"; + + simple-audio-card,cpu { + sound-dai = <&i2s>; + }; + + simple-audio-card,codec { + sound-dai = <&rt5616>; + }; + }; + vcc_sys: vsys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; @@ -60,6 +112,20 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_xfer>, <&emac_mdio>; + phy = <&phy0>; + phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */ + phy-reset-duration = <10>; /* millisecond */ + + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + &emmc { status = "okay"; }; @@ -257,6 +323,19 @@ &i2c2 { status = "okay"; + + rt5616: rt5616@1b { + compatible = "rt5616"; + reg = <0x1b>; + clocks = <&cru SCLK_I2S_OUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + }; +}; + +&i2s { + #sound-dai-cells = <0>; + status = "okay"; }; &sdio { @@ -264,13 +343,34 @@ broken-cd; bus-width = <4>; + cap-sd-highspeed; cap-sdio-irq; default-sample-phase = <90>; keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; non-removable; num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; +}; + +&uart0 { + status = "okay"; }; &uart2 { @@ -286,12 +386,30 @@ }; &pinctrl { + leds { + led_ctl: led-ctl { + rockchip,pins = <2 30 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int: pmic-int { rockchip,pins = <2 2 RK_FUNC_GPIO &pcfg_pull_default>; }; }; + sdio { + bt_wake_h: bt-wake-h { + rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + sdmmc { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <2 28 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + sleep { global_pwroff: global-pwroff { rockchip,pins = <2 7 RK_FUNC_1 &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index b9567c1e0687..d0f4bb7e1e50 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -60,6 +60,7 @@ serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; + spi = &spi; }; memory { @@ -94,7 +95,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -105,6 +106,7 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; + arm,pl330-broken-no-flushp; clocks = <&cru ACLK_DMAC2>; clock-names = "apb_pclk"; }; @@ -161,7 +163,7 @@ }; usb_otg: usb@10180000 { - compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", + compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb", "snps,dwc2"; reg = <0x10180000 0x40000>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; @@ -176,7 +178,7 @@ }; usb_host: usb@101c0000 { - compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", + compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb", "snps,dwc2"; reg = <0x101c0000 0x40000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; @@ -186,6 +188,27 @@ status = "disabled"; }; + emac: ethernet@10200000 { + compatible = "rockchip,rk3036-emac", "snps,arc-emac"; + reg = <0x10200000 0x4000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + rockchip,grf = <&grf>; + clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>; + clock-names = "hclk", "macref", "macclk"; + /* + * Fix the emac parent clock is DPLL instead of APLL. + * since that will cause some unstable things if the cpufreq + * is working. (e.g: the accurate 50MHz what mac_ref need) + */ + assigned-clocks = <&cru SCLK_MACPLL>; + assigned-clock-parents = <&cru PLL_DPLL>; + max-speed = <100>; + phy-mode = "rmii"; + status = "disabled"; + }; + sdmmc: dwmmc@10214000 { compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x10214000 0x4000>; @@ -211,7 +234,7 @@ }; emmc: dwmmc@1021c000 { - compatible = "rockchip,rk3288-dw-mshc"; + compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x1021c000 0x4000>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; broken-cd; @@ -241,8 +264,8 @@ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S>, <&cru SCLK_I2S>; + clock-names = "i2s_clk", "i2s_hclk"; + clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>; dmas = <&pdma 0>, <&pdma 1>; dma-names = "tx", "rx"; pinctrl-names = "default"; @@ -327,7 +350,7 @@ }; i2c1: i2c@20056000 { - compatible = "rockchip,rk3288-i2c"; + compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c"; reg = <0x20056000 0x1000>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -340,7 +363,7 @@ }; i2c2: i2c@2005a000 { - compatible = "rockchip,rk3288-i2c"; + compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c"; reg = <0x2005a000 0x1000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -395,7 +418,7 @@ }; i2c0: i2c@20072000 { - compatible = "rockchip,rk3288-i2c"; + compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c"; reg = <0x20072000 0x1000>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -407,6 +430,21 @@ status = "disabled"; }; + spi: spi@20074000 { + compatible = "rockchip,rockchip-spi"; + reg = <0x20074000 0x1000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks =<&cru PCLK_SPI>, <&cru SCLK_SPI>; + clock-names = "apb-pclk","spi_pclk"; + dmas = <&pdma 8>, <&pdma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_txd &spi_rxd &spi_clk &spi_cs0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pinctrl: pinctrl { compatible = "rockchip,rk3036-pinctrl"; rockchip,grf = <&grf>; @@ -556,6 +594,24 @@ }; }; + emac { + emac_xfer: emac-xfer { + rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_default>, /* crs_dvalid */ + <2 13 RK_FUNC_1 &pcfg_pull_default>, /* tx_en */ + <2 14 RK_FUNC_1 &pcfg_pull_default>, /* mac_clk */ + <2 15 RK_FUNC_1 &pcfg_pull_default>, /* rx_err */ + <2 16 RK_FUNC_1 &pcfg_pull_default>, /* rxd1 */ + <2 17 RK_FUNC_1 &pcfg_pull_default>, /* rxd0 */ + <2 18 RK_FUNC_1 &pcfg_pull_default>, /* txd1 */ + <2 19 RK_FUNC_1 &pcfg_pull_default>; /* txd0 */ + }; + + emac_mdio: emac-mdio { + rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_default>, /* mac_md */ + <2 25 RK_FUNC_1 &pcfg_pull_default>; /* mac_mdclk */ + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>, @@ -579,12 +635,12 @@ i2s { i2s_bus: i2s-bus { - rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_none>, - <1 1 RK_FUNC_1 &pcfg_pull_none>, - <1 2 RK_FUNC_1 &pcfg_pull_none>, - <1 3 RK_FUNC_1 &pcfg_pull_none>, - <1 4 RK_FUNC_1 &pcfg_pull_none>, - <1 5 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_default>, + <1 1 RK_FUNC_1 &pcfg_pull_default>, + <1 2 RK_FUNC_1 &pcfg_pull_default>, + <1 3 RK_FUNC_1 &pcfg_pull_default>, + <1 4 RK_FUNC_1 &pcfg_pull_default>, + <1 5 RK_FUNC_1 &pcfg_pull_default>; }; }; @@ -618,5 +674,29 @@ }; /* no rts / cts for uart2 */ }; + + spi { + spi_txd:spi-txd { + rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>; + }; + + spi_rxd:spi-rxd { + rockchip,pins = <1 28 RK_FUNC_3 &pcfg_pull_default>; + }; + + spi_clk:spi-clk { + rockchip,pins = <2 0 RK_FUNC_2 &pcfg_pull_default>; + }; + + spi_cs0:spi-cs0 { + rockchip,pins = <1 30 RK_FUNC_3 &pcfg_pull_default>; + + }; + + spi_cs1:spi-cs1 { + rockchip,pins = <1 31 RK_FUNC_3 &pcfg_pull_default>; + + }; + }; }; }; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index 38c91a839795..6d2a5b3a84a8 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -53,6 +53,18 @@ reg = <0x60000000 0x40000000>; }; + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm3 0 1000>; + regulator-name = "vdd_log"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + voltage-table = <1000000 100>, + <1200000 42>; + status = "okay"; + }; + vcc_sd0: fixed-regulator { compatible = "regulator-fixed"; regulator-name = "sdmmc-supply"; @@ -74,7 +86,7 @@ linux,code = <116>; label = "GPIO Key Power"; linux,input-type = <1>; - gpio-key,wakeup = <1>; + wakeup-source; debounce-interval = <100>; }; button@1 { @@ -82,7 +94,6 @@ linux,code = <104>; label = "GPIO Key Vol-"; linux,input-type = <1>; - gpio-key,wakeup = <0>; debounce-interval = <100>; }; /* VOL+ comes somehow thru the ADC */ @@ -203,6 +214,10 @@ disable-wp; }; +&pwm3 { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts index 7cdc308bfac5..a2b763e949b4 100644 --- a/arch/arm/boot/dts/rk3066a-marsboard.dts +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts @@ -52,6 +52,18 @@ reg = <0x60000000 0x40000000>; }; + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm3 0 1000>; + regulator-name = "vdd_log"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + voltage-table = <1000000 100>, + <1200000 42>; + status = "okay"; + }; + vcc_sd0: sdmmc-regulator { compatible = "regulator-fixed"; regulator-name = "sdmmc-supply"; @@ -194,6 +206,10 @@ }; }; +&pwm3 { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index 341c1f87936a..05533005a809 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -65,7 +65,7 @@ #size-cells = <0>; button@0 { - gpio-key,wakeup = <1>; + wakeup-source; gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <116>; @@ -74,6 +74,18 @@ }; }; + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm3 0 1000>; + regulator-name = "vdd_log"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + voltage-table = <1000000 100>, + <1200000 42>; + status = "okay"; + }; + vsys: vsys-regulator { compatible = "regulator-fixed"; regulator-name = "vsys"; @@ -431,6 +443,10 @@ status = "okay"; }; +&pwm3 { + status = "okay"; +}; + &saradc { vref-supply = <&vcc_25>; status = "okay"; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 58bac5053858..cb0a552e0b18 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -61,11 +61,13 @@ reg = <0x0>; operating-points = < /* kHz uV */ - 1008000 1075000 - 816000 1025000 - 600000 1025000 - 504000 1000000 - 312000 975000 + 1416000 1300000 + 1200000 1175000 + 1008000 1125000 + 816000 1125000 + 600000 1100000 + 504000 1100000 + 312000 1075000 >; clock-latency = <40000>; clocks = <&cru ARMCLK>; @@ -188,6 +190,16 @@ clock-names = "timer", "pclk"; }; + tsadc: tsadc@20060000 { + compatible = "rockchip,rk3066-tsadc"; + reg = <0x20060000 0x100>; + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "saradc", "apb_pclk"; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + status = "disabled"; + }; + usbphy: phy { compatible = "rockchip,rk3066a-usb-phy", "rockchip,rk3288-usb-phy"; rockchip,grf = <&grf>; @@ -200,6 +212,7 @@ reg = <0x17c>; clocks = <&cru SCLK_OTGPHY0>; clock-names = "phyclk"; + #clock-cells = <0>; }; usbphy1: usb-phy1 { @@ -207,6 +220,7 @@ reg = <0x188>; clocks = <&cru SCLK_OTGPHY1>; clock-names = "phyclk"; + #clock-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 66fa87d1e2c2..0b6924c97b6b 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -63,7 +63,7 @@ linux,code = <116>; label = "GPIO Key Power"; linux,input-type = <1>; - gpio-key,wakeup = <1>; + wakeup-source; debounce-interval = <100>; }; }; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 348d46b7ada5..9271833958f9 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -171,6 +171,7 @@ reg = <0x10c>; clocks = <&cru SCLK_OTGPHY0>; clock-names = "phyclk"; + #clock-cells = <0>; }; usbphy1: usb-phy1 { @@ -178,6 +179,7 @@ reg = <0x11c>; clocks = <&cru SCLK_OTGPHY1>; clock-names = "phyclk"; + #clock-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/rk3228.dtsi b/arch/arm/boot/dts/rk3228.dtsi index 119ff12ab440..4dae42a01509 100644 --- a/arch/arm/boot/dts/rk3228.dtsi +++ b/arch/arm/boot/dts/rk3228.dtsi @@ -96,7 +96,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 4faabdb65868..78d47f7d2938 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -110,7 +110,7 @@ linux,code = <116>; label = "GPIO Key Power"; linux,input-type = <1>; - gpio-key,wakeup = <1>; + wakeup-source; debounce-interval = <100>; }; }; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 4e3fd9aefe34..98c586a43c73 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -91,7 +91,7 @@ #size-cells = <0>; button@0 { - gpio-key,wakeup = <1>; + wakeup-source; gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <116>; @@ -408,6 +408,11 @@ output-low; }; + pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma { + bias-pull-up; + drive-strength = <12>; + }; + act8846 { pwr_hold: pwr-hold { rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>; @@ -457,6 +462,25 @@ }; sdmmc { + /* + * Default drive strength isn't enough to achieve even + * high-speed mode on firefly board so bump up to 12ma. + */ + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, + <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, + <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, + <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + }; + sdmmc_pwr: sdmmc-pwr { rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index 65c475642d5a..2ff9689d2e1b 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -74,7 +74,7 @@ linux,code = <116>; label = "GPIO Key Power"; linux,input-type = <1>; - gpio-key,wakeup = <1>; + wakeup-source; debounce-interval = <100>; }; }; diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts index 17f13c73fe5e..510a1d0d7abb 100644 --- a/arch/arm/boot/dts/rk3288-r89.dts +++ b/arch/arm/boot/dts/rk3288-r89.dts @@ -73,7 +73,7 @@ linux,code = <116>; label = "GPIO Key Power"; linux,input-type = <1>; - gpio-key,wakeup = <1>; + wakeup-source; debounce-interval = <100>; }; }; diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index 1ece66f3e162..e1ee9f949035 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -61,6 +61,31 @@ clock-output-names = "ext_gmac"; }; + io_domains: io-domains { + compatible = "rockchip,rk3288-io-voltage-domain"; + rockchip,grf = <&grf>; + + audio-supply = <&vcc_io>; + bb-supply = <&vcc_io>; + dvp-supply = <&vcc_18>; + flash0-supply = <&vcc_flash>; + flash1-supply = <&vccio_pmu>; + gpio30-supply = <&vccio_pmu>; + gpio1830 = <&vcc_io>; + lcdc-supply = <&vcc_io>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vcc_18>; + }; + + vcc_flash: flash-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <150>; + vin-supply = <&vcc_io>; + }; + vcc_sys: vsys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; @@ -85,6 +110,7 @@ pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_flash>; status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index c5453a0b07fc..dd3ad2e93a6d 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -49,6 +49,22 @@ stdout-path = "serial2:115200n8"; }; + gpio-leds { + compatible = "gpio-leds"; + + heartbeat { + gpios = <&gpio7 15 GPIO_ACTIVE_LOW>; + label = "rock2:green:state1"; + linux,default-trigger = "heartbeat"; + }; + + mmc { + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + label = "rock2:blue:state2"; + linux,default-trigger = "mmc0"; + }; + }; + ir: ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; @@ -70,6 +86,15 @@ #sound-dai-cells = <0>; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&hym8563>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable>; + reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + }; + vcc_usb_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -95,6 +120,21 @@ }; }; +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk &sdio0_int>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_18>; + status = "okay"; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed; @@ -119,7 +159,7 @@ }; &i2c0 { - hym8563@51 { + hym8563: hym8563@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; @@ -161,6 +201,12 @@ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + sdio { + wifi_enable: wifi-enable { + rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &spdif { diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index 136d650dd05f..610769d99522 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -108,7 +108,7 @@ lid { label = "Lid"; gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; - gpio-key,wakeup; + wakeup-source; linux,code = <0>; /* SW_LID */ linux,input-type = <5>; /* EV_SW */ debounce-interval = <1>; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 9fce91ffff6f..412809c60d01 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -64,7 +64,7 @@ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; debounce-interval = <100>; - gpio-key,wakeup; + wakeup-source; }; }; @@ -340,11 +340,6 @@ i2c-scl-rising-time-ns = <1000>; }; -&power { - assigned-clocks = <&cru SCLK_EDP_24M>; - assigned-clock-parents = <&xin24m>; -}; - &pwm1 { status = "okay"; }; @@ -421,7 +416,7 @@ status = "okay"; assigned-clocks = <&cru SCLK_USBPHY480M_SRC>; - assigned-clock-parents = <&cru SCLK_OTGPHY0>; + assigned-clock-parents = <&usbphy0>; dr_mode = "host"; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 8ac49f3efc17..31f7e20ef418 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -134,7 +134,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -145,6 +145,7 @@ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; + arm,pl330-broken-no-flushp; clocks = <&cru ACLK_DMAC2>; clock-names = "apb_pclk"; }; @@ -155,6 +156,7 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; + arm,pl330-broken-no-flushp; clocks = <&cru ACLK_DMAC1>; clock-names = "apb_pclk"; status = "disabled"; @@ -166,6 +168,7 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; + arm,pl330-broken-no-flushp; clocks = <&cru ACLK_DMAC1>; clock-names = "apb_pclk"; }; @@ -630,6 +633,9 @@ #address-cells = <1>; #size-cells = <0>; + assigned-clocks = <&cru SCLK_EDP_24M>; + assigned-clock-parents = <&xin24m>; + /* * Note: Although SCLK_* are the working clocks * of device without including on the NOC, needed for @@ -815,6 +821,10 @@ reg = <0>; remote-endpoint = <&hdmi_in_vopb>; }; + vopb_out_mipi: endpoint@2 { + reg = <2>; + remote-endpoint = <&mipi_in_vopb>; + }; }; }; @@ -848,6 +858,10 @@ reg = <0>; remote-endpoint = <&hdmi_in_vopl>; }; + vopl_out_mipi: endpoint@2 { + reg = <2>; + remote-endpoint = <&mipi_in_vopl>; + }; }; }; @@ -861,6 +875,37 @@ status = "disabled"; }; + mipi_dsi: mipi@ff960000 { + compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"; + reg = <0xff960000 0x4000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_MIPI_DSI0>; + clock-names = "ref", "pclk"; + rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + mipi_in: port { + #address-cells = <1>; + #size-cells = <0>; + mipi_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_mipi>; + }; + mipi_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_mipi>; + }; + }; + }; + }; + hdmi: hdmi@ff980000 { compatible = "rockchip,rk3288-dw-hdmi"; reg = <0xff980000 0x20000>; @@ -926,6 +971,7 @@ reg = <0x320>; clocks = <&cru SCLK_OTGPHY0>; clock-names = "phyclk"; + #clock-cells = <0>; }; usbphy1: usb-phy1 { @@ -933,6 +979,7 @@ reg = <0x334>; clocks = <&cru SCLK_OTGPHY1>; clock-names = "phyclk"; + #clock-cells = <0>; }; usbphy2: usb-phy2 { @@ -940,6 +987,7 @@ reg = <0x348>; clocks = <&cru SCLK_OTGPHY2>; clock-names = "phyclk"; + #clock-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 99eeea70223b..99bbcc2c9b89 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -67,7 +67,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -78,6 +78,7 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; + arm,pl330-broken-no-flushp; clocks = <&cru ACLK_DMA1>; clock-names = "apb_pclk"; }; @@ -88,6 +89,7 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; + arm,pl330-broken-no-flushp; clocks = <&cru ACLK_DMA1>; clock-names = "apb_pclk"; status = "disabled"; @@ -99,6 +101,7 @@ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; + arm,pl330-broken-no-flushp; clocks = <&cru ACLK_DMA2>; clock-names = "apb_pclk"; }; diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts index aa64faa72970..da24ab570b0e 100644 --- a/arch/arm/boot/dts/s5pv210-aquila.dts +++ b/arch/arm/boot/dts/s5pv210-aquila.dts @@ -257,7 +257,7 @@ linux,code = <KEY_POWER>; label = "power"; debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; }; }; @@ -268,7 +268,7 @@ &keypad { linux,input-no-autorepeat; - linux,input-wakeup; + wakeup-source; samsung,keypad-num-rows = <3>; samsung,keypad-num-columns = <3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts index 3b76eeeb8410..0a33d402138e 100644 --- a/arch/arm/boot/dts/s5pv210-goni.dts +++ b/arch/arm/boot/dts/s5pv210-goni.dts @@ -239,7 +239,7 @@ linux,code = <KEY_POWER>; label = "power"; debounce-interval = <1>; - gpio-key,wakeup; + wakeup-source; }; }; }; @@ -250,7 +250,7 @@ &keypad { linux,input-no-autorepeat; - linux,input-wakeup; + wakeup-source; samsung,keypad-num-rows = <3>; samsung,keypad-num-columns = <3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts index da7d210df670..54fcc3fc82e2 100644 --- a/arch/arm/boot/dts/s5pv210-smdkv210.dts +++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts @@ -59,7 +59,7 @@ &keypad { linux,input-no-autorepeat; - linux,input-wakeup; + wakeup-source; samsung,keypad-num-rows = <8>; samsung,keypad-num-columns = <8>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 8344a0ee2b86..ffc36bd24d2f 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -130,7 +130,7 @@ amba { #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus"; + compatible = "simple-bus"; ranges; pdma0: dma@e0900000 { diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 3f750f6170f2..78996bdbd3df 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -88,12 +88,6 @@ #clock-cells = <0>; clock-frequency = <0>; }; - - adc_op_clk: adc_op_clk{ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000>; - }; }; ns_sram: sram@00200000 { @@ -263,6 +257,44 @@ cache-level = <2>; }; + nand0: nand@80000000 { + compatible = "atmel,sama5d2-nand"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = < /* EBI CS3 */ + 0x80000000 0x08000000 + /* SMC PMECC regs */ + 0xf8014070 0x00000490 + /* SMC PMECC Error Location regs */ + 0xf8014500 0x00000200 + /* ROM Galois tables */ + 0x00040000 0x00018000 + >; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + atmel,nand-has-dma; + atmel,has-pmecc; + atmel,pmecc-lookup-table-offset = <0x0 0x8000>; + status = "disabled"; + + nfc@c0000000 { + compatible = "atmel,sama5d4-nfc"; + #address-cells = <1>; + #size-cells = <1>; + reg = < /* NFC Command Registers */ + 0xc0000000 0x08000000 + /* NFC HSMC regs */ + 0xf8014000 0x00000070 + /* NFC SRAM banks */ + 0x00100000 0x00100000 + >; + clocks = <&hsmc_clk>; + atmel,write-by-sram; + }; + }; + sdmmc0: sdio-host@a0000000 { compatible = "atmel,sama5d2-sdhci"; reg = <0xa0000000 0x300>; @@ -880,6 +912,13 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x100>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(35))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(36))>; + dma-names = "tx", "rx"; clocks = <&uart0_clk>; clock-names = "usart"; status = "disabled"; @@ -889,6 +928,13 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x100>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(37))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(38))>; + dma-names = "tx", "rx"; clocks = <&uart1_clk>; clock-names = "usart"; status = "disabled"; @@ -898,6 +944,13 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x100>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(39))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(40))>; + dma-names = "tx", "rx"; clocks = <&uart2_clk>; clock-names = "usart"; status = "disabled"; @@ -1016,6 +1069,13 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xfc008000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(41))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(42))>; + dma-names = "tx", "rx"; clocks = <&uart3_clk>; clock-names = "usart"; status = "disabled"; @@ -1024,6 +1084,13 @@ uart4: serial@fc00c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc00c000 0x100>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(43))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(44))>; + dma-names = "tx", "rx"; interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&uart4_clk>; clock-names = "usart"; @@ -1085,6 +1152,18 @@ status = "disabled"; }; + adc: adc@fc030000 { + compatible = "atmel,sama5d2-adc"; + reg = <0xfc030000 0x100>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&adc_clk>; + clock-names = "adc_clk"; + atmel,min-sample-rate-hz = <200000>; + atmel,max-sample-rate-hz = <20000000>; + atmel,startup-time-ms = <4>; + status = "disabled"; + }; + pioA: pinctrl@fc038000 { compatible = "atmel,sama5d2-pinctrl"; reg = <0xfc038000 0x600>; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 3a6056f9f0d2..bf825ca4f6f7 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -58,7 +58,7 @@ L2: cache-controller { compatible = "arm,pl310-cache"; reg = <0xf0100000 0x1000>; - interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_a3sm>; arm,data-latency = <3 3 3>; arm,tag-latency = <2 2 2>; @@ -70,8 +70,8 @@ sbsc2: memory-controller@fb400000 { compatible = "renesas,sbsc-sh73a0"; reg = <0xfb400000 0x400>; - interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>, - <0 38 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "sec", "temp"; power-domains = <&pd_a4bc1>; }; @@ -79,22 +79,22 @@ sbsc1: memory-controller@fe400000 { compatible = "renesas,sbsc-sh73a0"; reg = <0xfe400000 0x400>; - interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>, - <0 36 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "sec", "temp"; power-domains = <&pd_a4bc0>; }; pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>, - <0 56 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; }; cmt1: timer@e6138000 { compatible = "renesas,cmt-48-sh73a0", "renesas,cmt-48"; reg = <0xe6138000 0x200>; - interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_CMT1>; clock-names = "fck"; power-domains = <&pd_c5>; @@ -113,14 +113,14 @@ <0xe6900020 1>, <0xe6900040 1>, <0xe6900060 1>; - interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH - 0 2 IRQ_TYPE_LEVEL_HIGH - 0 3 IRQ_TYPE_LEVEL_HIGH - 0 4 IRQ_TYPE_LEVEL_HIGH - 0 5 IRQ_TYPE_LEVEL_HIGH - 0 6 IRQ_TYPE_LEVEL_HIGH - 0 7 IRQ_TYPE_LEVEL_HIGH - 0 8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks SH73A0_CLK_INTCA0>; power-domains = <&pd_a4s>; control-parent; @@ -135,14 +135,14 @@ <0xe6900024 1>, <0xe6900044 1>, <0xe6900064 1>; - interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH - 0 10 IRQ_TYPE_LEVEL_HIGH - 0 11 IRQ_TYPE_LEVEL_HIGH - 0 12 IRQ_TYPE_LEVEL_HIGH - 0 13 IRQ_TYPE_LEVEL_HIGH - 0 14 IRQ_TYPE_LEVEL_HIGH - 0 15 IRQ_TYPE_LEVEL_HIGH - 0 16 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks SH73A0_CLK_INTCA0>; power-domains = <&pd_a4s>; control-parent; @@ -157,14 +157,14 @@ <0xe6900028 1>, <0xe6900048 1>, <0xe6900068 1>; - interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH - 0 18 IRQ_TYPE_LEVEL_HIGH - 0 19 IRQ_TYPE_LEVEL_HIGH - 0 20 IRQ_TYPE_LEVEL_HIGH - 0 21 IRQ_TYPE_LEVEL_HIGH - 0 22 IRQ_TYPE_LEVEL_HIGH - 0 23 IRQ_TYPE_LEVEL_HIGH - 0 24 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks SH73A0_CLK_INTCA0>; power-domains = <&pd_a4s>; control-parent; @@ -179,14 +179,14 @@ <0xe690002c 1>, <0xe690004c 1>, <0xe690006c 1>; - interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH - 0 26 IRQ_TYPE_LEVEL_HIGH - 0 27 IRQ_TYPE_LEVEL_HIGH - 0 28 IRQ_TYPE_LEVEL_HIGH - 0 29 IRQ_TYPE_LEVEL_HIGH - 0 30 IRQ_TYPE_LEVEL_HIGH - 0 31 IRQ_TYPE_LEVEL_HIGH - 0 32 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks SH73A0_CLK_INTCA0>; power-domains = <&pd_a4s>; control-parent; @@ -197,10 +197,10 @@ #size-cells = <0>; compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic"; reg = <0xe6820000 0x425>; - interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH - 0 168 IRQ_TYPE_LEVEL_HIGH - 0 169 IRQ_TYPE_LEVEL_HIGH - 0 170 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks SH73A0_CLK_IIC0>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -211,10 +211,10 @@ #size-cells = <0>; compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic"; reg = <0xe6822000 0x425>; - interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH - 0 52 IRQ_TYPE_LEVEL_HIGH - 0 53 IRQ_TYPE_LEVEL_HIGH - 0 54 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_IIC1>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -225,10 +225,10 @@ #size-cells = <0>; compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic"; reg = <0xe6824000 0x425>; - interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH - 0 172 IRQ_TYPE_LEVEL_HIGH - 0 173 IRQ_TYPE_LEVEL_HIGH - 0 174 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks SH73A0_CLK_IIC2>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -239,10 +239,10 @@ #size-cells = <0>; compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic"; reg = <0xe6826000 0x425>; - interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH - 0 184 IRQ_TYPE_LEVEL_HIGH - 0 185 IRQ_TYPE_LEVEL_HIGH - 0 186 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks SH73A0_CLK_IIC3>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -253,10 +253,10 @@ #size-cells = <0>; compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic"; reg = <0xe6828000 0x425>; - interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH - 0 188 IRQ_TYPE_LEVEL_HIGH - 0 189 IRQ_TYPE_LEVEL_HIGH - 0 190 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks SH73A0_CLK_IIC4>; power-domains = <&pd_c5>; status = "disabled"; @@ -265,8 +265,8 @@ mmcif: mmc@e6bd0000 { compatible = "renesas,sh-mmcif"; reg = <0xe6bd0000 0x100>; - interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH - 0 141 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_MMCIF0>; power-domains = <&pd_a3sp>; reg-io-width = <4>; @@ -276,7 +276,7 @@ msiof0: spi@e6e20000 { compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof"; reg = <0xe6e20000 0x0064>; - interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks SH73A0_CLK_MSIOF0>; power-domains = <&pd_a3sp>; #address-cells = <1>; @@ -287,7 +287,7 @@ msiof1: spi@e6e10000 { compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof"; reg = <0xe6e10000 0x0064>; - interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_MSIOF1>; power-domains = <&pd_a3sp>; #address-cells = <1>; @@ -298,7 +298,7 @@ msiof2: spi@e6e00000 { compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof"; reg = <0xe6e00000 0x0064>; - interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_MSIOF2>; power-domains = <&pd_a3sp>; #address-cells = <1>; @@ -309,7 +309,7 @@ msiof3: spi@e6c90000 { compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof"; reg = <0xe6c90000 0x0064>; - interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_MSIOF3>; power-domains = <&pd_a3sp>; #address-cells = <1>; @@ -320,9 +320,9 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee100000 0x100>; - interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH - 0 84 IRQ_TYPE_LEVEL_HIGH - 0 85 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_SDHI0>; power-domains = <&pd_a3sp>; cap-sd-highspeed; @@ -333,8 +333,8 @@ sdhi1: sd@ee120000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee120000 0x100>; - interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH - 0 89 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_SDHI1>; power-domains = <&pd_a3sp>; toshiba,mmc-wrprotect-disable; @@ -345,8 +345,8 @@ sdhi2: sd@ee140000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee140000 0x100>; - interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH - 0 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_SDHI2>; power-domains = <&pd_a3sp>; toshiba,mmc-wrprotect-disable; @@ -357,9 +357,9 @@ scifa0: serial@e6c40000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c40000 0x100>; - interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -367,9 +367,9 @@ scifa1: serial@e6c50000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c50000 0x100>; - interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA1>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -377,9 +377,9 @@ scifa2: serial@e6c60000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c60000 0x100>; - interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA2>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -387,9 +387,9 @@ scifa3: serial@e6c70000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c70000 0x100>; - interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA3>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -397,9 +397,9 @@ scifa4: serial@e6c80000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c80000 0x100>; - interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA4>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -407,9 +407,9 @@ scifa5: serial@e6cb0000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6cb0000 0x100>; - interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA5>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -417,9 +417,9 @@ scifa6: serial@e6cc0000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6cc0000 0x100>; - interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_SCIFA6>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -427,9 +427,9 @@ scifa7: serial@e6cd0000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6cd0000 0x100>; - interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFA7>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -437,9 +437,9 @@ scifb: serial@e6c30000 { compatible = "renesas,scifb-sh73a0", "renesas,scifb"; reg = <0xe6c30000 0x100>; - interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks SH73A0_CLK_SCIFB>; - clock-names = "sci_ick"; + clock-names = "fck"; power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -579,7 +579,7 @@ #sound-dai-cells = <1>; compatible = "renesas,fsi2-sh73a0", "renesas,sh_fsi2"; reg = <0xec230000 0x400>; - interrupts = <0 146 0x4>; + interrupts = <GIC_SPI 146 0x4>; power-domains = <&pd_a4mp>; status = "disabled"; }; @@ -591,7 +591,7 @@ #size-cells = <1>; ranges = <0 0 0x20000000>; reg = <0xfec10000 0x400>; - interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&zb_clk>; power-domains = <&pd_a4s>; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 3ed4abdaaa9c..b89cbde3b289 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -69,7 +69,7 @@ ranges; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -656,6 +656,26 @@ status = "disabled"; }; + eccmgr: eccmgr@ffd08140 { + compatible = "altr,socfpga-ecc-manager"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + l2-ecc@ffd08140 { + compatible = "altr,socfpga-l2-ecc"; + reg = <0xffd08140 0x4>; + interrupts = <0 36 1>, <0 37 1>; + }; + + ocram-ecc@ffd08144 { + compatible = "altr,socfpga-ocram-ecc"; + reg = <0xffd08144 0x4>; + iram = <&ocram>; + interrupts = <0 178 1>, <0 179 1>; + }; + }; + L2: l2-cache@fffef000 { compatible = "arm,pl310-cache"; reg = <0xfffef000 0x1000>; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index cce9e50acf68..1c5e139e4d05 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -63,7 +63,7 @@ ranges; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index e48857249ce7..84101e4eebbf 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -161,7 +161,7 @@ linux,code = <0x100>; gpios = <&gpio0 7 0x4>; debounce-interval = <20>; - gpio-key,wakeup = <1>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index c611f5606dfe..6565f3cb866f 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -223,7 +223,7 @@ linux,code = <0x100>; gpios = <&gpio1 1 0x4>; debounce-interval = <20>; - gpio-key,wakeup = <1>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts index 0aa6fef5ce22..0d0da1f65f0e 100644 --- a/arch/arm/boot/dts/spear320-hmi.dts +++ b/arch/arm/boot/dts/spear320-hmi.dts @@ -141,7 +141,7 @@ linux,code = <0x100>; gpios = <&stmpegpio 3 0x4>; debounce-interval = <20>; - gpio-key,wakeup = <1>; + wakeup-source; }; button@2 { @@ -149,7 +149,7 @@ linux,code = <0x200>; gpios = <&stmpegpio 2 0x4>; debounce-interval = <20>; - gpio-key,wakeup = <1>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi index b7b4211c5353..55f9d0cc90f3 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi @@ -37,7 +37,6 @@ }; soc { - /* Add Synaptics touch screen, TC35893 keypad etc here */ i2c@80004000 { tc35893@44 { compatible = "toshiba,tc35893"; @@ -159,6 +158,33 @@ vddio-supply = <&db8500_vsmps2_reg>; }; }; + + i2c@80110000 { + synaptics@4b { + /* Synaptics RMI4 TM1217 touchscreen */ + compatible = "syna,rmi4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4b>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&synaptics_tvk_mode>; + interrupt-parent = <&gpio2>; + interrupts = <20 IRQ_TYPE_EDGE_FALLING>; + + rmi-f01@1 { + reg = <0x1>; + syna,nosleep = <1>; + }; + rmi-f11@11 { + reg = <0x11>; + touchscreen-inverted-x; + syna,sensor-type = <1>; + }; + }; + }; + pinctrl { /* Pull up this GPIO pin */ tc35893 { @@ -212,6 +238,15 @@ }; }; }; + synaptics { + synaptics_tvk_mode: synaptics_tvk { + /* Touchscreen uses GPIO 84 */ + tvk_cfg1 { + pins = "GPIO84_C2"; + ste,config = <&gpio_in_pu>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 27a333eb8987..e2be53343064 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -721,7 +721,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts index 9c73ac2842ad..2f5107ffeef0 100644 --- a/arch/arm/boot/dts/ste-u300.dts +++ b/arch/arm/boot/dts/ste-u300.dts @@ -384,7 +384,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index 6964fc9e97cf..6bfc5959dac3 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -58,18 +58,68 @@ }; memory { - reg = <0xc0000000 0x2000000>; + reg = <0x00000000 0x2000000>; }; aliases { serial0 = &usart1; }; + + leds { + compatible = "gpio-leds"; + green { + gpios = <&gpiog 6 1>; + linux,default-trigger = "heartbeat"; + }; + orange { + gpios = <&gpiog 7 1>; + }; + red { + gpios = <&gpiog 10 1>; + }; + blue { + gpios = <&gpiog 12 1>; + }; + }; + + usbotg_hs_phy: usbphy { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + clocks = <&rcc 0 30>; + clock-names = "main_clk"; + }; }; &clk_hse { clock-frequency = <25000000>; }; +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_mii>; + pinctrl-names = "default"; + phy-mode = "mii-id"; + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + &usart1 { + pinctrl-0 = <&usart1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "host"; + phys = <&usbotg_hs_phy>; + phy-names = "usb2-phy"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts index f0b731db6f53..01408073dd53 100644 --- a/arch/arm/boot/dts/stm32f429-disco.dts +++ b/arch/arm/boot/dts/stm32f429-disco.dts @@ -64,6 +64,17 @@ aliases { serial0 = &usart1; }; + + leds { + compatible = "gpio-leds"; + red { + gpios = <&gpiog 14 0>; + }; + green { + gpios = <&gpiog 13 0>; + linux,default-trigger = "heartbeat"; + }; + }; }; &clk_hse { @@ -71,5 +82,7 @@ }; &usart1 { + pinctrl-0 = <&usart1_pins_a>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index 5e1e234e8c0a..35df462559ca 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -46,6 +46,7 @@ */ #include "armv7-m.dtsi" +#include <dt-bindings/pinctrl/stm32f429-pinfunc.h> / { clocks { @@ -57,6 +58,8 @@ }; soc { + dma-ranges = <0xc0000000 0x0 0x10000000>; + timer2: timer@40000000 { compatible = "st,stm32-timer"; reg = <0x40000000 0x400>; @@ -168,6 +171,160 @@ status = "disabled"; }; + syscfg: system-config@40013800 { + compatible = "syscon"; + reg = <0x40013800 0x400>; + }; + + pin-controller { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32f429-pinctrl"; + ranges = <0 0x40020000 0x3000>; + pins-are-numbered; + + gpioa: gpio@40020000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x0 0x400>; + clocks = <&rcc 0 0>; + st,bank-name = "GPIOA"; + }; + + gpiob: gpio@40020400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x400 0x400>; + clocks = <&rcc 0 1>; + st,bank-name = "GPIOB"; + }; + + gpioc: gpio@40020800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x800 0x400>; + clocks = <&rcc 0 2>; + st,bank-name = "GPIOC"; + }; + + gpiod: gpio@40020c00 { + gpio-controller; + #gpio-cells = <2>; + reg = <0xc00 0x400>; + clocks = <&rcc 0 3>; + st,bank-name = "GPIOD"; + }; + + gpioe: gpio@40021000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&rcc 0 4>; + st,bank-name = "GPIOE"; + }; + + gpiof: gpio@40021400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1400 0x400>; + clocks = <&rcc 0 5>; + st,bank-name = "GPIOF"; + }; + + gpiog: gpio@40021800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1800 0x400>; + clocks = <&rcc 0 6>; + st,bank-name = "GPIOG"; + }; + + gpioh: gpio@40021c00 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1c00 0x400>; + clocks = <&rcc 0 7>; + st,bank-name = "GPIOH"; + }; + + gpioi: gpio@40022000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&rcc 0 8>; + st,bank-name = "GPIOI"; + }; + + gpioj: gpio@40022400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2400 0x400>; + clocks = <&rcc 0 9>; + st,bank-name = "GPIOJ"; + }; + + gpiok: gpio@40022800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2800 0x400>; + clocks = <&rcc 0 10>; + st,bank-name = "GPIOK"; + }; + + usart1_pins_a: usart1@0 { + pins1 { + pinmux = <STM32F429_PA9_FUNC_USART1_TX>; + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32F429_PA10_FUNC_USART1_RX>; + bias-disable; + }; + }; + + usbotg_hs_pins_a: usbotg_hs@0 { + pins { + pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>, + <STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>, + <STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>, + <STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>, + <STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>, + <STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>, + <STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>, + <STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>, + <STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>, + <STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>, + <STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>, + <STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>; + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + ethernet0_mii: mii@0 { + pins { + pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>, + <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>, + <STM32F429_PC2_FUNC_ETH_MII_TXD2>, + <STM32F429_PB8_FUNC_ETH_MII_TXD3>, + <STM32F429_PC3_FUNC_ETH_MII_TX_CLK>, + <STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>, + <STM32F429_PA2_FUNC_ETH_MDIO>, + <STM32F429_PC1_FUNC_ETH_MDC>, + <STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>, + <STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>, + <STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>, + <STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>, + <STM32F429_PH6_FUNC_ETH_MII_RXD2>, + <STM32F429_PH7_FUNC_ETH_MII_RXD3>; + slew-rate = <2>; + }; + }; + }; + rcc: rcc@40023810 { #clock-cells = <2>; compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; @@ -175,6 +332,62 @@ clocks = <&clk_hse>; }; + dma1: dma-controller@40026000 { + compatible = "st,stm32-dma"; + reg = <0x40026000 0x400>; + interrupts = <11>, + <12>, + <13>, + <14>, + <15>, + <16>, + <17>, + <47>; + clocks = <&rcc 0 21>; + #dma-cells = <4>; + }; + + dma2: dma-controller@40026400 { + compatible = "st,stm32-dma"; + reg = <0x40026400 0x400>; + interrupts = <56>, + <57>, + <58>, + <59>, + <60>, + <68>, + <69>, + <70>; + clocks = <&rcc 0 22>; + #dma-cells = <4>; + st,mem2mem; + }; + + ethernet0: dwmac@40028000 { + compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; + reg = <0x40028000 0x8000>; + reg-names = "stmmaceth"; + interrupts = <61>, <62>; + interrupt-names = "macirq", "eth_wake_irq"; + clock-names = "stmmaceth", "tx-clk", "rx-clk"; + clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <8>; + snps,mixed-burst; + dma-ranges; + status = "disabled"; + }; + + usbotg_hs: usb@40040000 { + compatible = "snps,dwc2"; + dma-ranges; + reg = <0x40040000 0x40000>; + interrupts = <77>; + clocks = <&rcc 0 29>; + clock-names = "otg"; + status = "disabled"; + }; + rng: rng@50060800 { compatible = "st,stm32-rng"; reg = <0x50060800 0x400>; diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts new file mode 100644 index 000000000000..e911af836471 --- /dev/null +++ b/arch/arm/boot/dts/stm32f469-disco.dts @@ -0,0 +1,75 @@ +/* + * Copyright 2016 - Lee Jones <lee.jones@linaro.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "stm32f429.dtsi" + +/ { + model = "STMicroelectronics STM32F469i-DISCO board"; + compatible = "st,stm32f469i-disco", "st,stm32f469"; + + chosen { + bootargs = "root=/dev/ram rdinit=/linuxrc"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x00000000 0x800000>; + }; + + aliases { + serial0 = &usart3; + }; +}; + +&clk_hse { + clock-frequency = <8000000>; +}; + +&usart3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts index 53660894ea95..023b03efa5ff 100644 --- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -45,6 +45,7 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Chuwi V7 CW0825"; @@ -88,6 +89,15 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; status = "okay"; + + ft5306de4: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&pio>; + interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <768>; + }; }; &lradc { diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts index 43f58fbe161c..9103864fef90 100644 --- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts +++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts @@ -87,6 +87,30 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; +}; + +®_usb0_vbus { + status = "okay"; +}; + ®_usb2_vbus { gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ status = "okay"; @@ -102,7 +126,17 @@ allwinner,pins = "PH6"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 77c31dab86b1..04b0d2d1ae6c 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -48,6 +48,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "INet-97F Rev 02"; @@ -93,6 +94,15 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; status = "okay"; + + ft5406ee8: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&pio>; + interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + }; }; &lradc { diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts index ca49b0d0ce1e..bba4f9cf9bf5 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts @@ -253,6 +253,15 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; status = "okay"; + + ft5406ee8: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&pio>; + interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + }; }; &lradc { diff --git a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts index 985e15503378..4e798f014c99 100644 --- a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts +++ b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts @@ -1,5 +1,6 @@ /* * Copyright 2015 Josef Gajdusek <atx@atx.name> + * Copyright 2015 - Marcus Cooper <codekipper@gmail.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,22 +43,11 @@ /dts-v1/; #include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> +#include "sunxi-itead-core-common.dtsi" / { model = "Iteaduino Plus A10"; compatible = "itead,iteaduino-plus-a10", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; }; &ahci { @@ -65,18 +55,6 @@ status = "okay"; }; -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - &emac { pinctrl-names = "default"; pinctrl-0 = <&emac_pins_a>; @@ -89,12 +67,7 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - axp209: pmic@34 { - reg = <0x34>; interrupts = <0>; }; }; @@ -135,68 +108,13 @@ status = "okay"; }; -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - ®_ahci_5v { status = "okay"; }; -#include "axp209.dtsi" - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1450000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-int-dll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_usb1_vbus { - status = "okay"; -}; - -®_usb2_vbus { - status = "okay"; -}; - &spi0 { pinctrl-names = "default"; pinctrl-0 = <&spi0_pins_a>, <&spi0_cs0_pins_a>; status = "okay"; }; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - -&usbphy { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts index ddf0683cbc6a..ee46ea854832 100644 --- a/arch/arm/boot/dts/sun4i-a10-mk802.dts +++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts @@ -44,6 +44,7 @@ #include "sun4i-a10.dtsi" #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "MK802"; @@ -84,7 +85,25 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + usb2_vbus_pin_mk802: usb2_vbus_pin@0 { allwinner,pins = "PH12"; allwinner,function = "gpio_out"; @@ -93,6 +112,10 @@ }; }; +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -109,7 +132,17 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts index 530ab28e9ca2..f6898c6b84d4 100644 --- a/arch/arm/boot/dts/sun5i-r8-chip.dts +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts @@ -70,6 +70,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &ehci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index b6ad7850fac6..1867af24ff52 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -709,6 +709,16 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + mmc3_8bit_emmc_pins: mmc3@1 { + allwinner,pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", + "PC13", "PC14", "PC15", + "PC24"; + allwinner,function = "mmc3"; + allwinner,drive = <SUN4I_PINCTRL_40_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + gmac_pins_mii_a: gmac_mii@0 { allwinner,pins = "PA0", "PA1", "PA2", "PA3", "PA8", "PA9", "PA11", diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi index ea69fb8ad4d8..4ec0c8679b2e 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi @@ -61,12 +61,14 @@ }; /* eMMC on core board */ -&mmc2 { +&mmc3 { pinctrl-names = "default"; - pinctrl-0 = <&mmc2_8bit_emmc_pins>; + pinctrl-0 = <&mmc3_8bit_emmc_pins>; vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; bus-width = <8>; non-removable; + cap-mmc-hw-reset; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts new file mode 100644 index 000000000000..661c21d9bdbd --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts @@ -0,0 +1,125 @@ +/* + * Copyright 2015 - Marcus Cooper <codekipper@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-itead-core-common.dtsi" + +/ { + model = "Itead Ibox A20"; + compatible = "itead,itead-ibox-a20", "allwinner,sun7i-a20"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_itead_core>; + + green { + label = "itead_core:green:usr"; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + blue { + label = "itead_core:blue:usr"; + gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; +}; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + axp209: pmic@34 { + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&pio { + led_pins_itead_core: led_pins@0 { + allwinner,pins = "PH20","PH21"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_ahci_5v { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts new file mode 100644 index 000000000000..5ee43d8bf174 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -0,0 +1,287 @@ +/* + * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Lamobo R1"; + compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + serial1 = &uart3; + serial2 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_lamobo_r1>; + + green { + label = "lamobo_r1:green:usr"; + gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_lamobo_r1>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ + }; +}; + +&ahci_pwr_pin_a { + allwinner,pins = "PB3"; +}; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 { + allwinner,pins = "PH10"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + gmac_power_pin_lamobo_r1: gmac_power_pin@0 { + allwinner,pins = "PH23"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_lamobo_r1: led_pins@0 { + allwinner,pins = "PH24"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +#include "axp209.dtsi" + +®_ahci_5v { + gpio = <&pio 1 3 0>; /* PB3 */ + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>, + <&spi0_cs0_pins_a>, + <&spi0_cs1_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_b>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts index c9e648d17a1e..90ff4a267025 100644 --- a/arch/arm/boot/dts/sun7i-a20-mk808c.dts +++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts @@ -53,6 +53,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "mk808c"; @@ -125,6 +126,30 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -145,7 +170,17 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts index c3c626b2cfa2..23aacce4d6c7 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts @@ -198,6 +198,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 { allwinner,pins = "PC3"; @@ -219,6 +223,20 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; ®_ahci_5v { @@ -254,6 +272,10 @@ regulator-name = "avcc"; }; +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -268,7 +290,17 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH04 */ + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH05 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 6f88fb0ddbc7..7e05e09e61c7 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -381,7 +381,7 @@ allwinner,pins = "PC5", "PC6", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", - "PC15"; + "PC15", "PC16"; allwinner,function = "mmc2"; allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts index 13ce68f06dd6..fef6abc0a703 100644 --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -68,7 +68,7 @@ }; &lradc { - vref-supply = <®_vcc3v0>; + vref-supply = <®_dcdc1>; status = "okay"; button@200 { @@ -96,7 +96,7 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ cd-inverted; @@ -106,13 +106,16 @@ &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_pins>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <8>; non-removable; + cap-mmc-hw-reset; status = "okay"; }; &mmc2_8bit_pins { + /* Increase drive strength for DDR modes */ + allwinner,drive = <SUN4I_PINCTRL_40_MA>; /* eMMC is missing pull-ups */ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; @@ -132,6 +135,76 @@ &r_rsb { status = "okay"; + + axp22x: pmic@3a3 { + compatible = "x-powers,axp223"; + reg = <0x3a3>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + }; +}; + +#include "axp22x.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-io"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2350000>; + regulator-max-microvolt = <2650000>; + regulator-name = "vdd-dll"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; }; &uart0 { diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts new file mode 100644 index 000000000000..342e1d33fa1c --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts @@ -0,0 +1,64 @@ +/* + * Copyright 2015 Vishnu Patekar + * Vishnu Patekar <vishnupatekar0510@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a83t.dtsi" + +/ { + model = "Allwinner A83T H8Homlet Proto Dev Board v2.0"; + compatible = "allwinner,h8homlet-v2", "allwinner,sun8i-a83t"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_b>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts new file mode 100644 index 000000000000..88b1e0970b8d --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -0,0 +1,65 @@ +/* + * Copyright 2015 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a83t.dtsi" + +/ { + model = "Cubietech Cubietruck Plus"; + compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_b>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi new file mode 100644 index 000000000000..d3473f81b12f --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -0,0 +1,228 @@ +/* + * Copyright 2015 Vishnu Patekar + * + * Vishnu Patekar <vishnupatekar0510@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + + */ + +#include "skeleton.dtsi" + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + + cpu@2 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <2>; + }; + + cpu@3 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <3>; + }; + + cpu@100 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x100>; + }; + + cpu@101 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x101>; + }; + + cpu@102 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x102>; + }; + + cpu@103 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x103>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* TODO: PRCM block has a mux for this. */ + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + /* + * This is called "internal OSC" in some places. + * It is an internal RC-based oscillator. + * TODO: Its controls are in the PRCM block. + */ + osc16M: osc16M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <16000000>; + clock-output-names = "osc16M"; + }; + + osc16Md512: osc16Md512_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <512>; + clock-mult = <1>; + clocks = <&osc16M>; + clock-output-names = "osc16M-d512"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pio: pinctrl@01c20800 { + compatible = "allwinner,sun8i-a83t-pinctrl"; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x01c20800 0x400>; + clocks = <&osc24M>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <3>; + #gpio-cells = <3>; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PF2", "PF4"; + allwinner,function = "uart0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + uart0_pins_b: uart0@1 { + allwinner,pins = "PB9", "PB10"; + allwinner,function = "uart0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0xa0>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; + }; + + watchdog@01c20ca0 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x01c20ca0 0x20>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + gic: interrupt-controller@01c81000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x1000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index e67df590535f..79f40c3e6101 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -45,6 +45,7 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/sun4i-a10.h> / { @@ -58,6 +59,62 @@ chosen { stdout-path = "serial0:115200n8"; }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_opc>, <&leds_r_opc>; + + status_led { + label = "orangepi-plus:red:status"; + gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; + }; + + pwr_led { + label = "orangepi-plus:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + r_gpio_keys { + compatible = "gpio-keys"; + input-name = "sw4"; + + pinctrl-names = "default"; + pinctrl-0 = <&sw_r_opc>; + + sw4@0 { + label = "sw4"; + linux,code = <BTN_0>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pio { + leds_opc: led_pins@0 { + allwinner,pins = "PA15"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&r_pio { + leds_r_opc: led_pins@0 { + allwinner,pins = "PL10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + sw_r_opc: key_pins@0 { + allwinner,pins = "PL03"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; &mmc0 { diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 1524130e43c9..dadb7f60c062 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -276,6 +276,33 @@ clocks = <&osc24M>, <&pll6 1>, <&pll5>; clock-output-names = "mbus"; }; + + apb0: apb0_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "apb0"; + }; + + apb0_gates: clk@01f01428 { + compatible = "allwinner,sun8i-h3-apb0-gates-clk", + "allwinner,sun4i-a10-gates-clk"; + reg = <0x01f01428 0x4>; + #clock-cells = <1>; + clocks = <&apb0>; + clock-indices = <0>, <1>; + clock-output-names = "apb0_pio", "apb0_ir"; + }; + + ir_clk: ir_clk@01f01454 { + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01f01454 0x4>; + #clock-cells = <0>; + clocks = <&osc32k>, <&osc24M>; + clock-output-names = "ir"; + }; }; soc { @@ -359,7 +386,7 @@ gpio-controller; #gpio-cells = <3>; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <3>; uart0_pins_a: uart0@0 { allwinner,pins = "PA4", "PA5"; @@ -493,5 +520,40 @@ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; }; + + apb0_reset: reset@01f014b0 { + reg = <0x01f014b0 0x4>; + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + + ir: ir@01f02000 { + compatible = "allwinner,sun5i-a13-ir"; + clocks = <&apb0_gates 1>, <&ir_clk>; + clock-names = "apb", "ir"; + resets = <&apb0_reset 1>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x01f02000 0x40>; + status = "disabled"; + }; + + r_pio: pinctrl@01f02c00 { + compatible = "allwinner,sun8i-h3-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 0>; + resets = <&apb0_reset 0>; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + ir_pins_a: ir@0 { + allwinner,pins = "PL11"; + allwinner,function = "s_cir_rx"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi index 1a69231d2da5..9d2b7e2f5975 100644 --- a/arch/arm/boot/dts/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -56,7 +56,6 @@ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - /* backlight is powered by AXP223 DC1SW */ }; chosen { @@ -67,7 +66,7 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ cd-inverted; @@ -92,6 +91,82 @@ &r_rsb { status = "okay"; + + axp22x: pmic@3a3 { + compatible = "x-powers,axp223"; + reg = <0x3a3>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + }; +}; + +#include "axp22x.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-io"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2350000>; + regulator-max-microvolt = <2650000>; + regulator-name = "vdd-dll"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dc1sw { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-lcd"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; }; &r_uart { @@ -99,3 +174,7 @@ pinctrl-0 = <&r_uart_pins_a>; status = "okay"; }; + +&simplefb_lcd { + vcc-lcd-supply = <®_dc1sw>; +}; diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index 382bd9fc5647..eb2ccd0a3bd5 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -111,9 +111,15 @@ vmmc-supply = <®_vcc3v0>; bus-width = <8>; non-removable; + cap-mmc-hw-reset; status = "okay"; }; +&mmc2_8bit_pins { + /* Increase drive strength for DDR modes */ + allwinner,drive = <SUN4I_PINCTRL_40_MA>; +}; + &r_ir { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index c0060e4f7379..d7a20d92b114 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -109,17 +109,6 @@ status = "okay"; }; -&i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins_a>; - status = "okay"; -}; - -&i2c3_pins_a { - /* Enable internal pull-up */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; -}; - &ohci0 { status = "okay"; }; @@ -174,9 +163,15 @@ vmmc-supply = <®_vcc3v0>; bus-width = <8>; non-removable; + cap-mmc-hw-reset; status = "okay"; }; +&mmc2_8bit_pins { + /* Increase drive strength for DDR modes */ + allwinner,drive = <SUN4I_PINCTRL_40_MA>; +}; + ®_usb1_vbus { pinctrl-0 = <&usb1_vbus_pin_optimus>; gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ @@ -206,17 +201,6 @@ status = "okay"; }; -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; - status = "okay"; -}; - -&uart4_pins_a { - /* Enable internal pull-up */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; -}; - &usbphy1 { phy-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index e838f206f2a0..f68b3242b33a 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -543,7 +543,7 @@ }; mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>, <&mmc0_clk 1>, <&mmc0_clk 2>; @@ -557,7 +557,7 @@ }; mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c10000 0x1000>; clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>, <&mmc1_clk 1>, <&mmc1_clk 2>; @@ -571,7 +571,7 @@ }; mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c11000 0x1000>; clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>, <&mmc2_clk 1>, <&mmc2_clk 2>; @@ -585,7 +585,7 @@ }; mmc3: mmc@01c12000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c12000 0x1000>; clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>, <&mmc3_clk 1>, <&mmc3_clk 2>; @@ -704,7 +704,8 @@ mmc2_8bit_pins: mmc2_8bit { allwinner,pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", - "PC13", "PC14", "PC15"; + "PC13", "PC14", "PC15", + "PC16"; allwinner,function = "mmc2"; allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; diff --git a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi new file mode 100644 index 000000000000..2565d5137a17 --- /dev/null +++ b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi @@ -0,0 +1,136 @@ +/* + * Copyright 2015 - Marcus Cooper <codekipper@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sunxi-common-regulators.dtsi" + +/ { + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-common32.dtsi b/arch/arm/boot/dts/uniphier-common32.dtsi index ea9301aaa461..61a095598206 100644 --- a/arch/arm/boot/dts/uniphier-common32.dtsi +++ b/arch/arm/boot/dts/uniphier-common32.dtsi @@ -45,6 +45,13 @@ /include/ "skeleton.dtsi" / { + clocks { + refclk: ref { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + }; + soc: soc { compatible = "simple-bus"; #address-cells = <1>; @@ -52,12 +59,6 @@ ranges; interrupt-parent = <&intc>; - extbus: extbus { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - }; - serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -98,9 +99,17 @@ clocks = <&uart_clk>; }; - system-bus-controller@58c00000 { - compatible = "socionext,uniphier-system-bus-controller"; - reg = <0x58c00000 0x400>, <0x59800000 0x2000>; + system_bus: system-bus@58c00000 { + compatible = "socionext,uniphier-system-bus"; + status = "disabled"; + reg = <0x58c00000 0x400>; + #address-cells = <2>; + #size-cells = <1>; + }; + + smpctrl@59800000 { + compatible = "socionext,uniphier-smpctrl"; + reg = <0x59801000 0x400>; }; timer@60000200 { diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts index f1e9d40149ab..ec94b7a661f2 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts @@ -72,14 +72,6 @@ }; }; -&extbus { - ranges = <1 0x00000000 0x42000000 0x02000000>; -}; - -&support_card { - ranges = <0x00000000 1 0x01f00000 0x00100000>; -}; - ðsc { interrupts = <0 49 4>; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi index 34f0d8dcd814..dadd86070c98 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi @@ -173,6 +173,10 @@ }; +&refclk { + clock-frequency = <24576000>; +}; + &serial3 { interrupts = <0 29 4>; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts index 5baa9fc9c888..b8134c6e094b 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts @@ -74,14 +74,6 @@ }; }; -&extbus { - ranges = <1 0x00000000 0x42000000 0x02000000>; -}; - -&support_card { - ranges = <0x00000000 1 0x01f00000 0x00100000>; -}; - ðsc { interrupts = <0 52 4>; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ace.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-ace.dts new file mode 100644 index 000000000000..d34358632bec --- /dev/null +++ b/arch/arm/boot/dts/uniphier-ph1-pro4-ace.dts @@ -0,0 +1,113 @@ +/* + * Device Tree Source for UniPhier PH1-Pro4 Ace Board + * + * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "uniphier-ph1-pro4.dtsi" + +/ { + model = "UniPhier PH1-Pro4 Ace Board"; + compatible = "socionext,ph1-pro4-ace", "socionext,ph1-pro4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + eeprom@54 { + compatible = "st,24c64"; + reg = <0x54>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts index 24626687d4df..95f631a3de35 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts @@ -74,14 +74,6 @@ }; }; -&extbus { - ranges = <1 0x00000000 0x42000000 0x02000000>; -}; - -&support_card { - ranges = <0x00000000 1 0x01f00000 0x00100000>; -}; - ðsc { interrupts = <0 50 4>; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts new file mode 100644 index 000000000000..7c3a1fcc9f3c --- /dev/null +++ b/arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts @@ -0,0 +1,108 @@ +/* + * Device Tree Source for UniPhier PH1-Pro4 Sanji Board + * + * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "uniphier-ph1-pro4.dtsi" + +/ { + model = "UniPhier PH1-Pro4 Sanji Board"; + compatible = "socionext,ph1-pro4-sanji", "socionext,ph1-pro4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + eeprom@54 { + compatible = "st,24c64"; + reg = <0x54>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi index d78142fb35c4..20f3f2ae7fa4 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi @@ -195,6 +195,10 @@ }; }; +&refclk { + clock-frequency = <25000000>; +}; + &pinctrl { compatible = "socionext,ph1-pro4-pinctrl", "syscon"; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi index 2f389ea75e01..24f6f664b269 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi @@ -189,6 +189,10 @@ }; }; +&refclk { + clock-frequency = <20000000>; +}; + &pinctrl { compatible = "socionext,ph1-pro5-pinctrl", "syscon"; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts index b7a032156789..acb420492b36 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts @@ -73,14 +73,6 @@ }; }; -&extbus { - ranges = <1 0x00000000 0x42000000 0x02000000>; -}; - -&support_card { - ranges = <0x00000000 1 0x01f00000 0x00100000>; -}; - ðsc { interrupts = <0 49 4>; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi index 691a17d765c2..03292f443305 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi @@ -68,6 +68,12 @@ }; clocks { + refclk: ref { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + arm_timer_clk: arm_timer_clk { #clock-cells = <0>; compatible = "fixed-clock"; @@ -94,12 +100,6 @@ ranges; interrupt-parent = <&intc>; - extbus: extbus { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - }; - timer@20000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x20000200 0x20>; @@ -216,9 +216,17 @@ clock-frequency = <400000>; }; - system-bus-controller@58c00000 { - compatible = "socionext,uniphier-system-bus-controller"; - reg = <0x58c00000 0x400>, <0x59800000 0x2000>; + system_bus: system-bus@58c00000 { + compatible = "socionext,uniphier-system-bus"; + status = "disabled"; + reg = <0x58c00000 0x400>; + #address-cells = <2>; + #size-cells = <1>; + }; + + smpctrl@59800000 { + compatible = "socionext,uniphier-smpctrl"; + reg = <0x59801000 0x400>; }; usb0: usb@5a800100 { diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts index fc7250c61674..d594f40e7f76 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts @@ -72,14 +72,6 @@ }; }; -&extbus { - ranges = <1 0x00000000 0x42000000 0x02000000>; -}; - -&support_card { - ranges = <0x00000000 1 0x01f00000 0x00100000>; -}; - ðsc { interrupts = <0 48 4>; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi index 7d06a1c487d8..6bfd29a05575 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi @@ -172,6 +172,10 @@ }; }; +&refclk { + clock-frequency = <25000000>; +}; + &serial3 { interrupts = <0 29 4>; }; diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi index f67445f4f10d..24592798a368 100644 --- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi +++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi @@ -63,6 +63,11 @@ function = "i2c3"; }; + pinctrl_i2c4: i2c4_grp { + groups = "i2c4"; + function = "i2c4"; + }; + pinctrl_uart0: uart0_grp { groups = "uart0"; function = "uart0"; diff --git a/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts b/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts index 9d7ec5c204dd..bf2619e4d489 100644 --- a/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts +++ b/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts @@ -63,6 +63,7 @@ serial1 = &serial1; serial2 = &serial2; i2c0 = &i2c0; + i2c2 = &i2c2; i2c4 = &i2c4; i2c5 = &i2c5; i2c6 = &i2c6; @@ -75,4 +76,13 @@ &i2c0 { status = "okay"; + + eeprom@54 { + compatible = "st,24c64"; + reg = <0x54>; + }; +}; + +&i2c2 { + status = "okay"; }; diff --git a/arch/arm/boot/dts/uniphier-proxstream2.dtsi b/arch/arm/boot/dts/uniphier-proxstream2.dtsi index 6bd353f2d77e..4ac484c6ce4e 100644 --- a/arch/arm/boot/dts/uniphier-proxstream2.dtsi +++ b/arch/arm/boot/dts/uniphier-proxstream2.dtsi @@ -200,6 +200,10 @@ }; }; +&refclk { + clock-frequency = <25000000>; +}; + &pinctrl { compatible = "socionext,proxstream2-pinctrl", "syscon"; }; diff --git a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi index 3d29d2806cc0..f7df0881c5e0 100644 --- a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi +++ b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi @@ -43,7 +43,7 @@ */ &i2c0 { - eeprom { + eeprom@50 { compatible = "microchip,24lc128"; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi index da271e3b922a..51ecc9b9c0ce 100644 --- a/arch/arm/boot/dts/uniphier-support-card.dtsi +++ b/arch/arm/boot/dts/uniphier-support-card.dtsi @@ -42,11 +42,15 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -&extbus { +&system_bus { + status = "okay"; + ranges = <1 0x00000000 0x42000000 0x02000000>; + support_card: support_card { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; + ranges = <0x00000000 1 0x01f00000 0x00100000>; ethsc: ethernet@00000000 { compatible = "smsc,lan9118", "smsc,lan9115"; diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index 6fd7efbead34..d23320af5ea7 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -148,7 +148,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index 21b02874bea3..7a556b92e55c 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -66,7 +66,7 @@ }; iofpga@3,00000000 { - compatible = "arm,amba-bus", "simple-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0 3 0 0x200000>; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index e712c0af149b..47e4a115adef 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -65,7 +65,7 @@ }; iofpga@7,00000000 { - compatible = "arm,amba-bus", "simple-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0 7 0 0x20000>; diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi index ed65e0f7dfc0..4d8b7f693535 100644 --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi @@ -1,10 +1,42 @@ /* * Copyright 2014 Toradex AG * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ / { @@ -18,38 +50,36 @@ clock-frequency = <16000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - sys_5v0_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; - /* USBH_PEN */ - usbh_vbus_reg: regulator@1 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1_reg>; - reg = <1>; - regulator-name = "usbh_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; - vin-supply = <&sys_5v0_reg>; - }; + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; /* USBH_PEN resp. USBH_P_EN */ + vin-supply = <®_5v0>; }; }; &bl { brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; + power-supply = <®_3v3>; status = "okay"; }; @@ -100,6 +130,10 @@ status = "okay"; }; +®_module_3v3 { + vin-supply = <®_3v3>; +}; + &uart0 { status = "okay"; }; @@ -113,7 +147,7 @@ }; &usbh1 { - vbus-supply = <&usbh_vbus_reg>; + vbus-supply = <®_usbh_vbus>; }; &iomuxc { diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index 6e556be42ccd..fda7f28101e1 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -1,26 +1,77 @@ /* * Copyright 2014 Toradex AG * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ / { bl: backlight { compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_bl_on>; pwms = <&pwm0 0 5000000 0>; + enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; status = "disabled"; }; + + reg_module_3v3: regulator-module-3v3 { + compatible = "regulator-fixed"; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_module_3v3_avdd: regulator-module-3v3-avdd { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_AVDD_AUDIO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &adc0 { status = "okay"; + vref-supply = <®_module_3v3_avdd>; }; &adc1 { status = "okay"; + vref-supply = <®_module_3v3_avdd>; }; &can0 { @@ -35,6 +86,13 @@ status = "disabled"; }; +&clks { + assigned-clocks = <&clks VF610_CLK_ENET_SEL>, + <&clks VF610_CLK_ENET_TS_SEL>; + assigned-clock-parents = <&clks VF610_CLK_ENET_50M>, + <&clks VF610_CLK_ENET_50M>; +}; + &dspi1 { bus-num = <1>; pinctrl-names = "default"; @@ -50,10 +108,12 @@ pinctrl-0 = <&pinctrl_esdhc1>; bus-width = <4>; cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + disable-wp; }; &fec1 { phy-mode = "rmii"; + phy-supply = <®_module_3v3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; }; @@ -195,6 +255,12 @@ >; }; + pinctrl_gpio_bl_on: gpio_bl_on { + fsl,pins = < + VF610_PAD_PTC0__GPIO_45 0x22ef + >; + }; + pinctrl_i2c0: i2c0grp { fsl,pins = < VF610_PAD_PTB14__I2C0_SCL 0x37ff @@ -239,6 +305,8 @@ fsl,pins = < VF610_PAD_PTB10__UART0_TX 0x21a2 VF610_PAD_PTB11__UART0_RX 0x21a1 + VF610_PAD_PTB12__UART0_RTS 0x21a2 + VF610_PAD_PTB13__UART0_CTS 0x21a1 >; }; diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts index c3173fc9e833..b3aeab58f718 100644 --- a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts @@ -1,10 +1,42 @@ /* * Copyright 2014 Toradex AG * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi index 84f091d1fcf2..3fe1f48c2aec 100644 --- a/arch/arm/boot/dts/vf500-colibri.dtsi +++ b/arch/arm/boot/dts/vf500-colibri.dtsi @@ -1,10 +1,42 @@ /* * Copyright 2014 Toradex AG * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "vf500.dtsi" diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi index e976d2fa1527..9d372720ad3f 100644 --- a/arch/arm/boot/dts/vf500.dtsi +++ b/arch/arm/boot/dts/vf500.dtsi @@ -1,10 +1,42 @@ /* * Copyright 2013 Freescale Semiconductor, Inc. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "skeleton.dtsi" @@ -43,6 +75,15 @@ clocks = <&clks VF610_CLK_PLATFORM_BUS>; }; }; + + aips-bus@40080000 { + pmu@40089000 { + compatible = "arm,cortex-a5-pmu"; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a5_cpu>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts index 10ebe99e2751..dbca4f86fdbb 100644 --- a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts @@ -1,10 +1,42 @@ /* * Copyright 2014 Toradex AG * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -14,4 +46,4 @@ / { model = "Toradex Colibri VF61 on Colibri Evaluation Board"; compatible = "toradex,vf610-colibri_vf61-on-eval", "toradex,vf610-colibri_vf61", "fsl,vf610"; -};
\ No newline at end of file +}; diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi index 2d7eab755210..ab4a29f95593 100644 --- a/arch/arm/boot/dts/vf610-colibri.dtsi +++ b/arch/arm/boot/dts/vf610-colibri.dtsi @@ -1,10 +1,42 @@ /* * Copyright 2014 Toradex AG * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "vf610.dtsi" diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 5438ee4be2ec..cdc100732514 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -1,10 +1,42 @@ /* * Copyright 2013 Freescale Semiconductor, Inc. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -96,6 +128,10 @@ &clks { clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>; clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext"; + assigned-clocks = <&clks VF610_CLK_ENET_SEL>, + <&clks VF610_CLK_ENET_TS_SEL>; + assigned-clock-parents = <&clks VF610_CLK_ENET_EXT>, + <&clks VF610_CLK_ENET_EXT>; }; &dspi0 { diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 58bc6e448be5..0cfc060f94d7 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -1,10 +1,42 @@ /* * Copyright 2013 Freescale Semiconductor, Inc. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "vf500.dtsi" diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index a9ceb5bac40e..5c0975451d4e 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -1,10 +1,42 @@ /* * Copyright 2013 Freescale Semiconductor, Inc. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "vf610-pinfunc.h" @@ -16,6 +48,8 @@ aliases { can0 = &can0; can1 = &can1; + ethernet0 = &fec0; + ethernet1 = &fec1; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -174,6 +208,34 @@ status = "disabled"; }; + sai0: sai@4002f000 { + compatible = "fsl,vf610-sai"; + reg = <0x4002f000 0x1000>; + interrupts = <84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_SAI0>, + <&clks VF610_CLK_SAI0_DIV>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 0 17>, + <&edma0 0 16>; + status = "disabled"; + }; + + sai1: sai@40030000 { + compatible = "fsl,vf610-sai"; + reg = <0x40030000 0x1000>; + interrupts = <85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_SAI1>, + <&clks VF610_CLK_SAI1_DIV>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 0 19>, + <&edma0 0 18>; + status = "disabled"; + }; + sai2: sai@40031000 { compatible = "fsl,vf610-sai"; reg = <0x40031000 0x1000>; @@ -188,6 +250,20 @@ status = "disabled"; }; + sai3: sai@40032000 { + compatible = "fsl,vf610-sai"; + reg = <0x40032000 0x1000>; + interrupts = <87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_SAI3>, + <&clks VF610_CLK_SAI3_DIV>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 9>, + <&edma0 1 8>; + status = "disabled"; + }; + pit: pit@40037000 { compatible = "fsl,vf610-pit"; reg = <0x40037000 0x1000>; @@ -558,6 +634,24 @@ status = "disabled"; }; + dac0: dac@400cc000 { + compatible = "fsl,vf610-dac"; + reg = <0x400cc000 1000>; + interrupts = <55 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dac"; + clocks = <&clks VF610_CLK_DAC0>; + status = "disabled"; + }; + + dac1: dac@400cd000 { + compatible = "fsl,vf610-dac"; + reg = <0x400cd000 1000>; + interrupts = <56 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dac"; + clocks = <&clks VF610_CLK_DAC1>; + status = "disabled"; + }; + fec0: ethernet@400d0000 { compatible = "fsl,mvf600-fec"; reg = <0x400d0000 0x1000>; @@ -629,5 +723,10 @@ status = "disabled"; }; }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 16>, <&adc1 16>; + }; }; }; diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts index 9efd16cb2859..307ed201d658 100644 --- a/arch/arm/boot/dts/zynq-parallella.dts +++ b/arch/arm/boot/dts/zynq-parallella.dts @@ -34,7 +34,7 @@ }; chosen { - bootargs = "earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait"; + bootargs = "earlycon root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait"; stdout-path = "serial0:115200n8"; }; }; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index cb64209bca08..e96959b2e67a 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -30,7 +30,7 @@ }; chosen { - bootargs = "earlyprintk"; + bootargs = "earlycon"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index abf5d238ae04..be6a986bbbd8 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -30,7 +30,7 @@ }; chosen { - bootargs = "earlyprintk"; + bootargs = "earlycon"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts index b9f2522012e8..7250c1eac7f9 100644 --- a/arch/arm/boot/dts/zynq-zed.dts +++ b/arch/arm/boot/dts/zynq-zed.dts @@ -29,7 +29,7 @@ }; chosen { - bootargs = "earlyprintk"; + bootargs = "earlycon"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts index 16c9cacd668d..d9e0f3e70671 100644 --- a/arch/arm/boot/dts/zynq-zybo.dts +++ b/arch/arm/boot/dts/zynq-zybo.dts @@ -29,10 +29,15 @@ }; chosen { - bootargs = "earlyprintk"; + bootargs = "earlycon"; stdout-path = "serial0:115200n8"; }; + usb_phy0: phy0 { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio0 46 1>; + }; }; &clkc { @@ -56,3 +61,9 @@ &uart1 { status = "okay"; }; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; +}; |