diff options
Diffstat (limited to 'arch/arm/boot')
| -rw-r--r-- | arch/arm/boot/compressed/head.S | 16 | ||||
| -rw-r--r-- | arch/arm/boot/dts/ls1021a.dtsi | 28 | ||||
| -rw-r--r-- | arch/arm/boot/dts/omap4-droid4-xt894.dts | 27 | ||||
| -rw-r--r-- | arch/arm/boot/dts/rk3288.dtsi | 7 |
4 files changed, 68 insertions, 10 deletions
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 6c7ccb428c07..7135820f76d4 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -1438,7 +1438,21 @@ ENTRY(efi_stub_entry) @ Preserve return value of efi_entry() in r4 mov r4, r0 - bl cache_clean_flush + + @ our cache maintenance code relies on CP15 barrier instructions + @ but since we arrived here with the MMU and caches configured + @ by UEFI, we must check that the CP15BEN bit is set in SCTLR. + @ Note that this bit is RAO/WI on v6 and earlier, so the ISB in + @ the enable path will be executed on v7+ only. + mrc p15, 0, r1, c1, c0, 0 @ read SCTLR + tst r1, #(1 << 5) @ CP15BEN bit set? + bne 0f + orr r1, r1, #(1 << 5) @ CP15 barrier instructions + mcr p15, 0, r1, c1, c0, 0 @ write SCTLR + ARM( .inst 0xf57ff06f @ v7+ isb ) + THUMB( isb ) + +0: bl cache_clean_flush bl cache_off @ Set parameters for booting zImage according to boot protocol diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 89eab1fd1f7f..fe6eecf01da1 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -446,6 +446,34 @@ status = "disabled"; }; + counter0: counter@29d0000 { + compatible = "fsl,ftm-quaddec"; + reg = <0x0 0x29d0000 0x0 0x10000>; + big-endian; + status = "disabled"; + }; + + counter1: counter@29e0000 { + compatible = "fsl,ftm-quaddec"; + reg = <0x0 0x29e0000 0x0 0x10000>; + big-endian; + status = "disabled"; + }; + + counter2: counter@29f0000 { + compatible = "fsl,ftm-quaddec"; + reg = <0x0 0x29f0000 0x0 0x10000>; + big-endian; + status = "disabled"; + }; + + counter3: counter@2a00000 { + compatible = "fsl,ftm-quaddec"; + reg = <0x0 0x2a00000 0x0 0x10000>; + big-endian; + status = "disabled"; + }; + gpio0: gpio@2300000 { compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2300000 0x0 0x10000>; diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index e21ec929f096..714863f8f261 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -214,7 +214,6 @@ width-mm = <50>; height-mm = <89>; - backlight = <&lcd_backlight>; panel-timing { clock-frequency = <0>; /* Calculated by dsi */ @@ -383,20 +382,30 @@ }; &i2c1 { - lm3532@38 { + led-controller@38 { compatible = "ti,lm3532"; + #address-cells = <1>; + #size-cells = <0>; reg = <0x38>; enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; - lcd_backlight: backlight { - compatible = "ti,lm3532-backlight"; + ramp-up-us = <1024>; + ramp-down-us = <8193>; - lcd { - led-sources = <0 1 2>; - ramp-up-msec = <1>; - ramp-down-msec = <0>; - }; + led@0 { + reg = <0>; + led-sources = <2>; + ti,led-mode = <0>; + label = ":backlight"; + linux,default-trigger = "backlight"; + }; + + led@1 { + reg = <1>; + led-sources = <1>; + ti,led-mode = <0>; + label = ":kbd_backlight"; }; }; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index a024d1e7e74c..8ce3dd2264b1 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -616,6 +616,7 @@ dr_mode = "host"; phys = <&usbphy2>; phy-names = "usb2-phy"; + snps,reset-phy-on-wake; status = "disabled"; }; @@ -904,6 +905,8 @@ clocks = <&cru SCLK_OTGPHY0>; clock-names = "phyclk"; #clock-cells = <0>; + resets = <&cru SRST_USBOTG_PHY>; + reset-names = "phy-reset"; }; usbphy1: usb-phy@334 { @@ -912,6 +915,8 @@ clocks = <&cru SCLK_OTGPHY1>; clock-names = "phyclk"; #clock-cells = <0>; + resets = <&cru SRST_USBHOST0_PHY>; + reset-names = "phy-reset"; }; usbphy2: usb-phy@348 { @@ -920,6 +925,8 @@ clocks = <&cru SCLK_OTGPHY2>; clock-names = "phyclk"; #clock-cells = <0>; + resets = <&cru SRST_USBHOST1_PHY>; + reset-names = "phy-reset"; }; }; }; |