19 files changed, 302 insertions, 35 deletions
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 3f9a9ebc77c3..4c23a68a0917 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -167,9 +167,11 @@ if [ $(words $(ZRELADDR)) -gt 1 -a "$(CONFIG_AUTO_ZRELADDR)" = "" ]; then \
 	false; \
 fi
 
+efi-obj-$(CONFIG_EFI_STUB) := $(objtree)/drivers/firmware/efi/libstub/lib.a
+
 $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
 		$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) \
-		$(bswapsdi2) FORCE
+		$(bswapsdi2) $(efi-obj-y) FORCE
 	@$(check_for_multiple_zreladdr)
 	$(call if_changed,ld)
 	@$(check_for_bad_syms)
diff --git a/arch/arm/boot/compressed/efi-header.S b/arch/arm/boot/compressed/efi-header.S
new file mode 100644
index 000000000000..9d5dc4fda3c1
--- /dev/null
+++ b/arch/arm/boot/compressed/efi-header.S
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2013-2015 Linaro Ltd
+ * Authors: Roy Franz <roy.franz@linaro.org>
+ *          Ard Biesheuvel <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+		.macro	__nop
+#ifdef CONFIG_EFI_STUB
+		@ This is almost but not quite a NOP, since it does clobber the
+		@ condition flags. But it is the best we can do for EFI, since
+		@ PE/COFF expects the magic string "MZ" at offset 0, while the
+		@ ARM/Linux boot protocol expects an executable instruction
+		@ there.
+		.inst	'M' | ('Z' << 8) | (0x1310 << 16)   @ tstne r0, #0x4d000
+#else
+		mov	r0, r0
+#endif
+		.endm
+
+		.macro	__EFI_HEADER
+#ifdef CONFIG_EFI_STUB
+		b	__efi_start
+
+		.set	start_offset, __efi_start - start
+		.org	start + 0x3c
+		@
+		@ The PE header can be anywhere in the file, but for
+		@ simplicity we keep it together with the MSDOS header
+		@ The offset to the PE/COFF header needs to be at offset
+		@ 0x3C in the MSDOS header.
+		@ The only 2 fields of the MSDOS header that are used are this
+		@ PE/COFF offset, and the "MZ" bytes at offset 0x0.
+		@
+		.long	pe_header - start	@ Offset to the PE header.
+
+pe_header:
+		.ascii	"PE\0\0"
+
+coff_header:
+		.short	0x01c2			@ ARM or Thumb
+		.short	2			@ nr_sections
+		.long	0 			@ TimeDateStamp
+		.long	0			@ PointerToSymbolTable
+		.long	1			@ NumberOfSymbols
+		.short	section_table - optional_header
+						@ SizeOfOptionalHeader
+		.short	0x306			@ Characteristics.
+						@ IMAGE_FILE_32BIT_MACHINE |
+						@ IMAGE_FILE_DEBUG_STRIPPED |
+						@ IMAGE_FILE_EXECUTABLE_IMAGE |
+						@ IMAGE_FILE_LINE_NUMS_STRIPPED
+
+optional_header:
+		.short	0x10b			@ PE32 format
+		.byte	0x02			@ MajorLinkerVersion
+		.byte	0x14			@ MinorLinkerVersion
+		.long	_end - __efi_start	@ SizeOfCode
+		.long	0			@ SizeOfInitializedData
+		.long	0			@ SizeOfUninitializedData
+		.long	efi_stub_entry - start	@ AddressOfEntryPoint
+		.long	start_offset		@ BaseOfCode
+		.long	0			@ data
+
+extra_header_fields:
+		.long	0			@ ImageBase
+		.long	0x200			@ SectionAlignment
+		.long	0x200			@ FileAlignment
+		.short	0			@ MajorOperatingSystemVersion
+		.short	0			@ MinorOperatingSystemVersion
+		.short	0			@ MajorImageVersion
+		.short	0			@ MinorImageVersion
+		.short	0			@ MajorSubsystemVersion
+		.short	0			@ MinorSubsystemVersion
+		.long	0			@ Win32VersionValue
+
+		.long	_end - start		@ SizeOfImage
+		.long	start_offset		@ SizeOfHeaders
+		.long	0			@ CheckSum
+		.short	0xa			@ Subsystem (EFI application)
+		.short	0			@ DllCharacteristics
+		.long	0			@ SizeOfStackReserve
+		.long	0			@ SizeOfStackCommit
+		.long	0			@ SizeOfHeapReserve
+		.long	0			@ SizeOfHeapCommit
+		.long	0			@ LoaderFlags
+		.long	0x6			@ NumberOfRvaAndSizes
+
+		.quad	0			@ ExportTable
+		.quad	0			@ ImportTable
+		.quad	0			@ ResourceTable
+		.quad	0			@ ExceptionTable
+		.quad	0			@ CertificationTable
+		.quad	0			@ BaseRelocationTable
+
+section_table:
+		@
+		@ The EFI application loader requires a relocation section
+		@ because EFI applications must be relocatable. This is a
+		@ dummy section as far as we are concerned.
+		@
+		.ascii	".reloc\0\0"
+		.long	0			@ VirtualSize
+		.long	0			@ VirtualAddress
+		.long	0			@ SizeOfRawData
+		.long	0			@ PointerToRawData
+		.long	0			@ PointerToRelocations
+		.long	0			@ PointerToLineNumbers
+		.short	0			@ NumberOfRelocations
+		.short	0			@ NumberOfLineNumbers
+		.long	0x42100040		@ Characteristics
+
+		.ascii	".text\0\0\0"
+		.long	_end - __efi_start	@ VirtualSize
+		.long	__efi_start		@ VirtualAddress
+		.long	_edata - __efi_start	@ SizeOfRawData
+		.long	__efi_start		@ PointerToRawData
+		.long	0			@ PointerToRelocations
+		.long	0			@ PointerToLineNumbers
+		.short	0			@ NumberOfRelocations
+		.short	0			@ NumberOfLineNumbers
+		.long	0xe0500020		@ Characteristics
+
+		.align	9
+__efi_start:
+#endif
+		.endm
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 06e983f59980..af11c2f8f3b7 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -12,6 +12,8 @@
 #include <asm/assembler.h>
 #include <asm/v7m.h>
 
+#include "efi-header.S"
+
  AR_CLASS(	.arch	armv7-a	)
  M_CLASS(	.arch	armv7-m	)
 
@@ -126,7 +128,7 @@
 start:
 		.type	start,#function
 		.rept	7
-		mov	r0, r0
+		__nop
 		.endr
    ARM(		mov	r0, r0		)
    ARM(		b	1f		)
@@ -139,7 +141,8 @@ start:
 		.word	0x04030201	@ endianness flag
 
  THUMB(		.thumb			)
-1:
+1:		__EFI_HEADER
+
  ARM_BE8(	setend	be		)	@ go BE8 if compiled for BE8
  AR_CLASS(	mrs	r9, cpsr	)
 #ifdef CONFIG_ARM_VIRT_EXT
@@ -1353,6 +1356,53 @@ __enter_kernel:
 
 reloc_code_end:
 
+#ifdef CONFIG_EFI_STUB
+		.align	2
+_start:		.long	start - .
+
+ENTRY(efi_stub_entry)
+		@ allocate space on stack for passing current zImage address
+		@ and for the EFI stub to return of new entry point of
+		@ zImage, as EFI stub may copy the kernel. Pointer address
+		@ is passed in r2. r0 and r1 are passed through from the
+		@ EFI firmware to efi_entry
+		adr	ip, _start
+		ldr	r3, [ip]
+		add	r3, r3, ip
+		stmfd	sp!, {r3, lr}
+		mov	r2, sp			@ pass zImage address in r2
+		bl	efi_entry
+
+		@ Check for error return from EFI stub. r0 has FDT address
+		@ or error code.
+		cmn	r0, #1
+		beq	efi_load_fail
+
+		@ Preserve return value of efi_entry() in r4
+		mov	r4, r0
+		bl	cache_clean_flush
+		bl	cache_off
+
+		@ Set parameters for booting zImage according to boot protocol
+		@ put FDT address in r2, it was returned by efi_entry()
+		@ r1 is the machine type, and r0 needs to be 0
+		mov	r0, #0
+		mov	r1, #0xFFFFFFFF
+		mov	r2, r4
+
+		@ Branch to (possibly) relocated zImage that is in [sp]
+		ldr	lr, [sp]
+		ldr	ip, =start_offset
+		add	lr, lr, ip
+		mov	pc, lr				@ no mode switch
+
+efi_load_fail:
+		@ Return EFI_LOAD_ERROR to EFI firmware on error.
+		ldr	r0, =0x80000001
+		ldmfd	sp!, {ip, pc}
+ENDPROC(efi_stub_entry)
+#endif
+
 		.align
 		.section ".stack", "aw", %nobits
 .L_user_stack:	.space	4096
diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S
index 2b60b843ac5e..81c493156ce8 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.S
+++ b/arch/arm/boot/compressed/vmlinux.lds.S
@@ -48,6 +48,13 @@ SECTIONS
     *(.rodata)
     *(.rodata.*)
   }
+  .data : {
+    /*
+     * The EFI stub always executes from RAM, and runs strictly before the
+     * decompressor, so we can make an exception for its r/w data, and keep it
+     */
+    *(.data.efistub)
+  }
   .piggydata : {
     *(.piggydata)
   }
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 294cfe40388d..40beede46e55 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -64,73 +64,73 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp00 {
+		opp@200000000 {
 			opp-hz = /bits/ 64 <200000000>;
 			opp-microvolt = <900000>;
 			clock-latency-ns = <200000>;
 		};
-		opp01 {
+		opp@300000000 {
 			opp-hz = /bits/ 64 <300000000>;
 			opp-microvolt = <900000>;
 			clock-latency-ns = <200000>;
 		};
-		opp02 {
+		opp@400000000 {
 			opp-hz = /bits/ 64 <400000000>;
 			opp-microvolt = <925000>;
 			clock-latency-ns = <200000>;
 		};
-		opp03 {
+		opp@500000000 {
 			opp-hz = /bits/ 64 <500000000>;
 			opp-microvolt = <950000>;
 			clock-latency-ns = <200000>;
 		};
-		opp04 {
+		opp@600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <975000>;
 			clock-latency-ns = <200000>;
 		};
-		opp05 {
+		opp@700000000 {
 			opp-hz = /bits/ 64 <700000000>;
 			opp-microvolt = <987500>;
 			clock-latency-ns = <200000>;
 		};
-		opp06 {
+		opp@800000000 {
 			opp-hz = /bits/ 64 <800000000>;
 			opp-microvolt = <1000000>;
 			clock-latency-ns = <200000>;
 			opp-suspend;
 		};
-		opp07 {
+		opp@900000000 {
 			opp-hz = /bits/ 64 <900000000>;
 			opp-microvolt = <1037500>;
 			clock-latency-ns = <200000>;
 		};
-		opp08 {
+		opp@1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <1087500>;
 			clock-latency-ns = <200000>;
 		};
-		opp09 {
+		opp@1100000000 {
 			opp-hz = /bits/ 64 <1100000000>;
 			opp-microvolt = <1137500>;
 			clock-latency-ns = <200000>;
 		};
-		opp10 {
+		opp@1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <1187500>;
 			clock-latency-ns = <200000>;
 		};
-		opp11 {
+		opp@1300000000 {
 			opp-hz = /bits/ 64 <1300000000>;
 			opp-microvolt = <1250000>;
 			clock-latency-ns = <200000>;
 		};
-		opp12 {
+		opp@1400000000 {
 			opp-hz = /bits/ 64 <1400000000>;
 			opp-microvolt = <1287500>;
 			clock-latency-ns = <200000>;
 		};
-		opp13 {
+		opp@1500000000 {
 			opp-hz = /bits/ 64 <1500000000>;
 			opp-microvolt = <1350000>;
 			clock-latency-ns = <200000>;
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
index 58adf176425a..a51834e1dd27 100644
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -154,7 +154,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 7b31fdb79ced..dc0cebfe22d7 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -94,7 +94,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 1b66328a8498..18cd4114a23e 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -154,7 +154,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 7c51839ff934..eea90f37bbb8 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -155,7 +155,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 929e0b37bd9e..6c11a2ae35ef 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -145,7 +145,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 8263fc18a7d9..d354d406954d 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -113,14 +113,14 @@
 &clks {
 	assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
 			  <&clks IMX6QDL_PLL4_BYPASS>,
-			  <&clks IMX6QDL_CLK_PLL4_POST_DIV>,
 			  <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+			  <&clks IMX6QDL_CLK_PLL4_POST_DIV>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>,
 				 <&clks IMX6QDL_PLL4_BYPASS_SRC>,
 				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
 				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-	assigned-clock-rates = <0>, <0>, <24576000>;
+	assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>;
 };
 
 &ecspi1 {
diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts
index 1a78f013f37a..b75f7b2b7c4a 100644
--- a/arch/arm/boot/dts/omap4-duovero-parlor.dts
+++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts
@@ -189,3 +189,7 @@
 	};
 };
 
+&uart3 {
+	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART3_RX>;
+};
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index 314f59c12162..d0c743853318 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -25,9 +25,9 @@
 		cache-sets = <512>;
 		cache-line-size = <32>;
 		/* At full speed latency must be >=2 */
-		arm,tag-latency = <2>;
-		arm,data-latency = <2 2>;
-		arm,dirty-latency = <2>;
+		arm,tag-latency = <8>;
+		arm,data-latency = <8 8>;
+		arm,dirty-latency = <8>;
 	};
 
 	mtu0: mtu@101e2000 {
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index ad21a4293a33..133375bc8aa5 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -6,6 +6,9 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <dt-bindings/clock/stih407-clks.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/c8sectpfe.h>
 / {
 	soc {
 		sbc_serial0: serial@9530000 {
@@ -35,12 +38,18 @@
 			status = "okay";
 		};
 
-		i2c@9842000 {
+		ssc2: i2c@9842000 {
 			status = "okay";
+			clock-frequency = <100000>;
+			st,i2c-min-scl-pulse-width-us = <0>;
+			st,i2c-min-sda-pulse-width-us = <5>;
 		};
 
-		i2c@9843000 {
+		ssc3: i2c@9843000 {
 			status = "okay";
+			clock-frequency = <100000>;
+			st,i2c-min-scl-pulse-width-us = <0>;
+			st,i2c-min-sda-pulse-width-us = <5>;
 		};
 
 		i2c@9844000 {
@@ -93,5 +102,38 @@
 			phy-mode = "rgmii";
 			fixed-link = <0 1 1000 0 0>;
 		};
+
+		demux@08a20000 {
+			compatible	= "st,stih407-c8sectpfe";
+			status		= "okay";
+			reg		= <0x08a20000 0x10000>,
+					  <0x08a00000 0x4000>;
+			reg-names	= "c8sectpfe", "c8sectpfe-ram";
+			interrupts	= <GIC_SPI 34 IRQ_TYPE_NONE>,
+					  <GIC_SPI 35 IRQ_TYPE_NONE>;
+			interrupt-names	= "c8sectpfe-error-irq",
+					  "c8sectpfe-idle-irq";
+			pinctrl-0	= <&pinctrl_tsin0_serial>;
+			pinctrl-1	= <&pinctrl_tsin0_parallel>;
+			pinctrl-2	= <&pinctrl_tsin3_serial>;
+			pinctrl-3	= <&pinctrl_tsin4_serial_alt3>;
+			pinctrl-4	= <&pinctrl_tsin5_serial_alt1>;
+			pinctrl-names	= "tsin0-serial",
+					  "tsin0-parallel",
+					  "tsin3-serial",
+					  "tsin4-serial",
+					  "tsin5-serial";
+			clocks		= <&clk_s_c0_flexgen CLK_PROC_STFE>;
+			clock-names	= "c8sectpfe";
+
+			/* tsin0 is TSA on NIMA */
+			tsin0: port@0 {
+				tsin-num	= <0>;
+				serial-not-parallel;
+				i2c-bus		= <&ssc2>;
+				reset-gpios	= <&pio15 4 GPIO_ACTIVE_HIGH>;
+				dvb-card	= <STV0367_TDA18212_NIMA_1>;
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
index 2d4250b1faf8..68b479b8772c 100644
--- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
@@ -83,6 +83,7 @@
 		reg = <0x5d>;
 		interrupt-parent = <&pio>;
 		interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */
+		touchscreen-swapped-x-y;
 	};
 };
 
diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
index 40c23a0b7cfc..ec1aa64ded68 100644
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -399,7 +399,7 @@
 
 	/* CPU DFLL clock */
 	clock@0,70110000 {
-		status = "okay";
+		status = "disabled";
 		vdd-cpu-supply = <&vdd_cpu>;
 		nvidia,i2c-fs-rate = <400000>;
 	};
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index 01f40197ea13..3279bf1a17a1 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -110,7 +110,11 @@
 			interrupt-parent = <&vic>;
 			interrupts = <31>; /* Cascaded to vic */
 			clear-mask = <0xffffffff>;
-			valid-mask = <0xffc203f8>;
+			/*
+			 * Valid interrupt lines mask according to
+			 * table 4-36 page 4-50 of ARM DUI 0225D
+			 */
+			valid-mask = <0x0760031b>;
 		};
 
 		dma@10130000 {
@@ -266,8 +270,8 @@
 			};
 			mmc@5000 {
 				compatible = "arm,pl180", "arm,primecell";
-				reg = < 0x5000 0x1000>;
-				interrupts-extended = <&vic 22 &sic 2>;
+				reg = <0x5000 0x1000>;
+				interrupts-extended = <&vic 22 &sic 1>;
 				clocks = <&xtal24mhz>, <&pclk>;
 				clock-names = "mclk", "apb_pclk";
 			};
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts
index b83137f66034..33a8eb28374e 100644
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/versatile-pb.dts
@@ -5,6 +5,16 @@
 	compatible = "arm,versatile-pb";
 
 	amba {
+		/* The Versatile PB is using more SIC IRQ lines than the AB */
+		sic: intc@10003000 {
+			clear-mask = <0xffffffff>;
+			/*
+			 * Valid interrupt lines mask according to
+			 * figure 3-30 page 3-74 of ARM DUI 0224B
+			 */
+			valid-mask = <0x7fe003ff>;
+		};
+
 		gpio2: gpio@101e6000 {
 			compatible = "arm,pl061", "arm,primecell";
 			reg = <0x101e6000 0x1000>;
@@ -67,6 +77,13 @@
 		};
 
 		fpga {
+			mmc@5000 {
+				/*
+				 * Overrides the interrupt assignment from
+				 * the Versatile AB board file.
+				 */
+				interrupts-extended = <&sic 22 &sic 23>;
+			};
 			uart@9000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x9000 0x1000>;
@@ -86,7 +103,8 @@
 			mmc@b000 {
 				compatible = "arm,pl180", "arm,primecell";
 				reg = <0xb000 0x1000>;
-				interrupts-extended = <&vic 23 &sic 2>;
+				interrupt-parent = <&sic>;
+				interrupts = <1>, <2>;
 				clocks = <&xtal24mhz>, <&pclk>;
 				clock-names = "mclk", "apb_pclk";
 			};
diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi
index b1c59a766a13..e12213d16693 100644
--- a/arch/arm/boot/dts/wm8650.dtsi
+++ b/arch/arm/boot/dts/wm8650.dtsi
@@ -187,6 +187,15 @@
 			interrupts = <43>;
 		};
 
+		sdhc@d800a000 {
+			compatible = "wm,wm8505-sdhc";
+			reg = <0xd800a000 0x400>;
+			interrupts = <20>, <21>;
+			clocks = <&clksdhc>;
+			bus-width = <4>;
+			sdon-inverted;
+		};
+
 		fb: fb@d8050800 {
 			compatible = "wm,wm8505-fb";
 			reg = <0xd8050800 0x200>;