diff options
Diffstat (limited to 'arch/arm/boot/dts')
83 files changed, 451 insertions, 144 deletions
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index 18f70b35da4c..204bccfcc110 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -432,7 +432,7 @@ pinctrl-0 = <&mmc0_pins_default>; }; -&gpio0 { +&gpio0_target { /* Do not idle the GPIO used for holding the VTT regulator */ ti,no-reset-on-init; ti,no-idle-on-init; diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 9915c891e05f..7a9eb2b0d45b 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -127,7 +127,7 @@ ranges = <0x0 0x5000 0x1000>; }; - target-module@7000 { /* 0x44e07000, ap 14 20.0 */ + gpio0_target: target-module@7000 { /* 0x44e07000, ap 14 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; ti,hwmods = "gpio1"; reg = <0x7000 0x4>, @@ -2038,7 +2038,9 @@ reg = <0xe000 0x4>, <0xe054 0x4>; reg-names = "rev", "sysc"; - ti,sysc-midle ; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; ti,sysc-sidle = <SYSC_IDLE_FORCE>, <SYSC_IDLE_NO>, <SYSC_IDLE_SMART>; diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index bf3002009b00..76f819f4ba48 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -16,6 +16,37 @@ can = &hecc; }; + cpus { + cpu: cpu@0 { + /* Based on OMAP3630 variants OPP50 and OPP100 */ + operating-points-v2 = <&cpu0_opp_table>; + + clock-latency = <300000>; /* From legacy driver */ + }; + }; + + cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + /* + * AM3517 TRM only lists 600MHz @ 1.2V, but omap36xx + * appear to operate at 300MHz as well. Since AM3517 only + * lists one operating voltage, it will remain fixed at 1.2V + */ + opp50-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1200000>; + opp-supported-hw = <0xffffffff 0xffffffff>; + opp-suspend; + }; + + opp100-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1200000>; + opp-supported-hw = <0xffffffff 0xffffffff>; + }; + }; + ocp@68000000 { am35x_otg_hs: am35x_otg_hs@5c040000 { compatible = "ti,omap3-musb"; diff --git a/arch/arm/boot/dts/am3517_mt_ventoux.dts b/arch/arm/boot/dts/am3517_mt_ventoux.dts index e507e4ae0d88..e7d7124a34ba 100644 --- a/arch/arm/boot/dts/am3517_mt_ventoux.dts +++ b/arch/arm/boot/dts/am3517_mt_ventoux.dts @@ -8,7 +8,7 @@ / { model = "TeeJet Mt.Ventoux"; - compatible = "teejet,mt_ventoux", "ti,omap3"; + compatible = "teejet,mt_ventoux", "ti,am3517", "ti,omap3"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/am3874-iceboard.dts b/arch/arm/boot/dts/am3874-iceboard.dts index 883fb85135d4..1b4b2b0500e4 100644 --- a/arch/arm/boot/dts/am3874-iceboard.dts +++ b/arch/arm/boot/dts/am3874-iceboard.dts @@ -111,13 +111,13 @@ reg = <0x70>; #address-cells = <1>; #size-cells = <0>; + i2c-mux-idle-disconnect; i2c@0 { /* FMC A */ #address-cells = <1>; #size-cells = <0>; reg = <0>; - i2c-mux-idle-disconnect; }; i2c@1 { @@ -125,7 +125,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <1>; - i2c-mux-idle-disconnect; }; i2c@2 { @@ -133,7 +132,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <2>; - i2c-mux-idle-disconnect; }; i2c@3 { @@ -141,7 +139,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <3>; - i2c-mux-idle-disconnect; }; i2c@4 { @@ -149,14 +146,12 @@ #address-cells = <1>; #size-cells = <0>; reg = <4>; - i2c-mux-idle-disconnect; }; i2c@5 { #address-cells = <1>; #size-cells = <0>; reg = <5>; - i2c-mux-idle-disconnect; ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <5000>; }; ina230@41 { compatible = "ti,ina230"; reg = <0x41>; shunt-resistor = <5000>; }; @@ -182,14 +177,12 @@ #address-cells = <1>; #size-cells = <0>; reg = <6>; - i2c-mux-idle-disconnect; }; i2c@7 { #address-cells = <1>; #size-cells = <0>; reg = <7>; - i2c-mux-idle-disconnect; u41: pca9575@20 { compatible = "nxp,pca9575"; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 848e2a8884e2..14bbc438055f 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -337,6 +337,8 @@ ti,hwmods = "dss_dispc"; clocks = <&disp_clk>; clock-names = "fck"; + + max-memory-bandwidth = <230000000>; }; rfbi: rfbi@4832a800 { diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index 0aaacea1d887..820ce3b60bb6 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -186,3 +186,30 @@ pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; }; + +&mac_sw { + pinctrl-names = "default", "sleep"; + status = "okay"; +}; + +&cpsw_port1 { + phy-handle = <ðphy0_sw>; + phy-mode = "rgmii"; + ti,dual-emac-pvid = <1>; +}; + +&cpsw_port2 { + phy-handle = <ðphy1_sw>; + phy-mode = "rgmii"; + ti,dual-emac-pvid = <2>; +}; + +&davinci_mdio_sw { + ethphy0_sw: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1_sw: ethernet-phy@1 { + reg = <1>; + }; +}; diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index ea1c119feaa5..c3d966904d64 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -27,3 +27,8 @@ pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_rev20>; }; + +&mac { + status = "okay"; + dual_emac; +}; diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts index 7935d70874ce..fa0088025b2c 100644 --- a/arch/arm/boot/dts/am574x-idk.dts +++ b/arch/arm/boot/dts/am574x-idk.dts @@ -35,3 +35,8 @@ pinctrl-1 = <&mmc2_pins_default>; pinctrl-2 = <&mmc2_pins_default>; }; + +&mac { + status = "okay"; + dual_emac; +}; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 423855a2a2d6..398721c7201c 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -363,11 +363,6 @@ ext-clk-src; }; -&mac { - status = "okay"; - dual_emac; -}; - &cpsw_emac0 { phy-handle = <ðphy0>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index 09a088f98566..b75af21069f9 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -113,6 +113,7 @@ #address-cells = <1>; #size-cells = <0>; pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>; + bus-width = <4>; mmc-pwrseq = <&wifi_pwrseq>; non-removable; status = "okay"; diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi index 7c3cb7ece6cb..925cb37c22f0 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi +++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi @@ -9,6 +9,14 @@ reg = <0 0x40000000>; }; + leds { + /* + * Since there is no upstream GPIO driver yet, + * remove the incomplete node. + */ + /delete-node/ act; + }; + reg_3v3: fixed-regulator { compatible = "regulator-fixed"; regulator-name = "3V3"; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index ea0e7c19eb4e..37e048771b0f 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -2732,7 +2732,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>; dma-names = "tx", "rx"; - clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 22>, + clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 0>, <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>, <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>; clock-names = "fck", "ahclkx", "ahclkr"; @@ -2768,8 +2768,8 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 22>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 24>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 0>, + <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>, <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>; clock-names = "fck", "ahclkx", "ahclkr"; status = "disabled"; @@ -2786,9 +2786,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x68000 0x2000>, @@ -2804,7 +2803,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2821,9 +2820,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x6c000 0x2000>, @@ -2839,7 +2837,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2856,9 +2854,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x70000 0x2000>, @@ -2874,7 +2871,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2891,9 +2888,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x74000 0x2000>, @@ -2909,7 +2905,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2926,9 +2922,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x78000 0x2000>, @@ -2944,7 +2939,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2961,9 +2956,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x7c000 0x2000>, @@ -2979,7 +2973,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -3085,6 +3079,58 @@ phys = <&phy_gmii_sel 2>; }; }; + + mac_sw: switch@0 { + compatible = "ti,dra7-cpsw-switch","ti,cpsw-switch"; + reg = <0x0 0x4000>; + ranges = <0 0 0x4000>; + clocks = <&gmac_main_clk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + syscon = <&scm_conf>; + status = "disabled"; + + interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx_thresh", "rx", "tx", "misc"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + cpsw_port1: port@1 { + reg = <1>; + label = "port1"; + mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1>; + }; + + cpsw_port2: port@2 { + reg = <2>; + label = "port2"; + mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2>; + }; + }; + + davinci_mdio_sw: mdio@1000 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + clocks = <&gmac_main_clk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <0>; + bus_freq = <1000000>; + reg = <0x1000 0x100>; + }; + + cpts { + clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>; + clock-names = "cpts"; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi index 2a6ce87071f9..9e027b9a5f91 100644 --- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi +++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi @@ -328,6 +328,10 @@ pinctrl-0 = <&pinctrl_pwm3>; }; +&snvs_pwrkey { + status = "okay"; +}; + &ssi2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6-logicpd-som.dtsi b/arch/arm/boot/dts/imx6-logicpd-som.dtsi index 7ceae3573248..547fb141ec0c 100644 --- a/arch/arm/boot/dts/imx6-logicpd-som.dtsi +++ b/arch/arm/boot/dts/imx6-logicpd-som.dtsi @@ -207,6 +207,10 @@ vin-supply = <&sw1c_reg>; }; +&snvs_poweroff { + status = "okay"; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index f3404dd10537..cf628465cd0a 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -230,6 +230,8 @@ accelerometer@1c { compatible = "fsl,mma8451"; reg = <0x1c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mma8451_int>; interrupt-parent = <&gpio6>; interrupts = <31 IRQ_TYPE_LEVEL_LOW>; }; @@ -628,6 +630,12 @@ >; }; + pinctrl_mma8451_int: mma8451intgrp { + fsl,pins = < + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb0b1 + >; + }; + pinctrl_pwm3: pwm1grp { fsl,pins = < MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 710f850e785c..e2e604d6ba0b 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -448,7 +448,7 @@ compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x302d0000 0x10000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, + clocks = <&clks IMX7D_GPT1_ROOT_CLK>, <&clks IMX7D_GPT1_ROOT_CLK>; clock-names = "ipg", "per"; }; @@ -457,7 +457,7 @@ compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x302e0000 0x10000>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, + clocks = <&clks IMX7D_GPT2_ROOT_CLK>, <&clks IMX7D_GPT2_ROOT_CLK>; clock-names = "ipg", "per"; status = "disabled"; @@ -467,7 +467,7 @@ compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x302f0000 0x10000>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, + clocks = <&clks IMX7D_GPT3_ROOT_CLK>, <&clks IMX7D_GPT3_ROOT_CLK>; clock-names = "ipg", "per"; status = "disabled"; @@ -477,7 +477,7 @@ compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x30300000 0x10000>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, + clocks = <&clks IMX7D_GPT4_ROOT_CLK>, <&clks IMX7D_GPT4_ROOT_CLK>; clock-names = "ipg", "per"; status = "disabled"; diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts index f7a841a28865..2a0a98fe67f0 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts @@ -9,5 +9,5 @@ / { model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit"; - compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3"; + compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts index 7675bc3fa868..57bae2aa910e 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts @@ -9,5 +9,5 @@ / { model = "LogicPD Zoom OMAP35xx Torpedo Development Kit"; - compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3"; + compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3430", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 3fdd0a72f87f..506b118e511a 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -192,3 +192,7 @@ &twl_gpio { ti,use-leds; }; + +&twl_keypad { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi index d1eae47b83f6..08bae935605c 100644 --- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi +++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi @@ -43,11 +43,13 @@ compatible = "motorola,mapphone-cpcap-charger"; interrupts-extended = < &cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0 - &cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0 + &cpcap 22 0 &cpcap 21 0 &cpcap 20 0 &cpcap 19 0 + &cpcap 54 0 >; interrupt-names = "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn", - "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb"; + "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld", + "battdetb"; mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW &gpio3 23 GPIO_ACTIVE_LOW>; io-channels = <&cpcap_adc 0 &cpcap_adc 1 diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts index 3621b7d2b22a..9980c10c6e29 100644 --- a/arch/arm/boot/dts/mt7629-rfb.dts +++ b/arch/arm/boot/dts/mt7629-rfb.dts @@ -66,9 +66,21 @@ pinctrl-1 = <&ephy_leds_pins>; status = "okay"; + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + gmac1: mac@1 { compatible = "mediatek,eth-mac"; reg = <1>; + phy-mode = "gmii"; phy-handle = <&phy0>; }; @@ -78,7 +90,6 @@ phy0: ethernet-phy@0 { reg = <0>; - phy-mode = "gmii"; }; }; }; diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi index 9608bc2ccb3f..867b88103b9d 100644 --- a/arch/arm/boot/dts/mt7629.dtsi +++ b/arch/arm/boot/dts/mt7629.dtsi @@ -468,14 +468,12 @@ compatible = "mediatek,mt7629-sgmiisys", "syscon"; reg = <0x1b128000 0x3000>; #clock-cells = <1>; - mediatek,physpeed = "2500"; }; sgmiisys1: syscon@1b130000 { compatible = "mediatek,mt7629-sgmiisys", "syscon"; reg = <0x1b130000 0x3000>; #clock-cells = <1>; - mediatek,physpeed = "2500"; }; }; }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 1aa99fc1487a..125ed933ca75 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 BeagleBoard xM"; - compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3"; + compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index e3df3c166902..4ed3f93f5841 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 BeagleBoard"; - compatible = "ti,omap3-beagle", "ti,omap3"; + compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-cm-t3530.dts b/arch/arm/boot/dts/omap3-cm-t3530.dts index 76e52c78cbb4..32dbaeaed147 100644 --- a/arch/arm/boot/dts/omap3-cm-t3530.dts +++ b/arch/arm/boot/dts/omap3-cm-t3530.dts @@ -9,7 +9,7 @@ / { model = "CompuLab CM-T3530"; - compatible = "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3"; + compatible = "compulab,omap3-cm-t3530", "ti,omap3430", "ti,omap34xx", "ti,omap3"; /* Regulator to trigger the reset signal of the Wifi module */ mmc2_sdio_reset: regulator-mmc2-sdio-reset { diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts index 6e944dfa0f3d..683819bf0915 100644 --- a/arch/arm/boot/dts/omap3-cm-t3730.dts +++ b/arch/arm/boot/dts/omap3-cm-t3730.dts @@ -9,7 +9,7 @@ / { model = "CompuLab CM-T3730"; - compatible = "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3"; + compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3"; wl12xx_vmmc2: wl12xx_vmmc2 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts index a80fc60bc773..afed85078ad8 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts @@ -11,7 +11,7 @@ #include "omap3-devkit8000-lcd-common.dtsi" / { model = "TimLL OMAP3 Devkit8000 with 4.3'' LCD panel"; - compatible = "timll,omap3-devkit8000", "ti,omap3"; + compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3"; lcd0: display { panel-timing { diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts index 0753776071f8..07c51a105c0d 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts @@ -11,7 +11,7 @@ #include "omap3-devkit8000-lcd-common.dtsi" / { model = "TimLL OMAP3 Devkit8000 with 7.0'' LCD panel"; - compatible = "timll,omap3-devkit8000", "ti,omap3"; + compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3"; lcd0: display { panel-timing { diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index faafc48d8f61..162d0726b008 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -7,7 +7,7 @@ #include "omap3-devkit8000-common.dtsi" / { model = "TimLL OMAP3 Devkit8000"; - compatible = "timll,omap3-devkit8000", "ti,omap3"; + compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3"; aliases { display1 = &dvi0; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index d01fc8744fd7..409a758c99f1 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -11,7 +11,7 @@ / { model = "OMAP3 GTA04"; - compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3"; + compatible = "ti,omap3-gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { @@ -124,6 +124,7 @@ spi-max-frequency = <100000>; spi-cpol; spi-cpha; + spi-cs-high; backlight= <&backlight>; label = "lcd"; diff --git a/arch/arm/boot/dts/omap3-ha-lcd.dts b/arch/arm/boot/dts/omap3-ha-lcd.dts index badb9b3c8897..c9ecbc45c8e2 100644 --- a/arch/arm/boot/dts/omap3-ha-lcd.dts +++ b/arch/arm/boot/dts/omap3-ha-lcd.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 HEAD acoustics LCD-baseboard with TAO3530 SOM"; - compatible = "headacoustics,omap3-ha-lcd", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; + compatible = "headacoustics,omap3-ha-lcd", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3"; }; &omap3_pmx_core { diff --git a/arch/arm/boot/dts/omap3-ha.dts b/arch/arm/boot/dts/omap3-ha.dts index a5365252bfbe..35c4e15abeb7 100644 --- a/arch/arm/boot/dts/omap3-ha.dts +++ b/arch/arm/boot/dts/omap3-ha.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 HEAD acoustics baseboard with TAO3530 SOM"; - compatible = "headacoustics,omap3-ha", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; + compatible = "headacoustics,omap3-ha", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3"; }; &omap3_pmx_core { diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts index 03dcd05fb8a0..d134ce1cffc0 100644 --- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts +++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts @@ -10,7 +10,7 @@ / { model = "IGEPv2 Rev. F (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020-rev-f", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap36xx", "ti,omap3"; /* Regulator to trigger the WL_EN signal of the Wifi module */ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen { diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index 6d0519e3dfd0..e341535a7162 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -10,7 +10,7 @@ / { model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap36xx", "ti,omap3"; vmmcsdio_fixed: fixedregulator-mmcsdio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts index 060acd1e803a..9ca1d0f61964 100644 --- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -10,7 +10,7 @@ / { model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030-rev-g", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap36xx", "ti,omap3"; /* Regulator to trigger the WL_EN signal of the Wifi module */ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen { diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 25170bd3c573..32f31035daa2 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -10,7 +10,7 @@ / { model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap36xx", "ti,omap3"; vmmcsdio_fixed: fixedregulator-mmcsdio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index 9a5fde2d9bce..ec9ba04ef43b 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -10,7 +10,7 @@ / { model = "TI OMAP3430 LDP (Zoom1 Labrador)"; - compatible = "ti,omap3-ldp", "ti,omap3"; + compatible = "ti,omap3-ldp", "ti,omap3430", "ti,omap3"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index c22833d4e568..73d477898ec2 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -7,7 +7,7 @@ / { model = "INCOstartec LILLY-A83X module (DM3730)"; - compatible = "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3"; + compatible = "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3"; chosen { bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0"; diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts index fec335400074..ecb4ef738e07 100644 --- a/arch/arm/boot/dts/omap3-lilly-dbb056.dts +++ b/arch/arm/boot/dts/omap3-lilly-dbb056.dts @@ -8,7 +8,7 @@ / { model = "INCOstartec LILLY-DBB056 (DM3730)"; - compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3"; + compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &twl { diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index 74c0ff2350d3..2495a696cec6 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -12,7 +12,7 @@ / { model = "Nokia N9"; - compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3"; + compatible = "nokia,omap3-n9", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &i2c2 { diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 84a5ade1e865..63659880eeb3 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -155,6 +155,12 @@ pwms = <&pwm9 0 26316 0>; /* 38000 Hz */ }; + rom_rng: rng { + compatible = "nokia,n900-rom-rng"; + clocks = <&rng_ick>; + clock-names = "ick"; + }; + /* controlled (enabled/disabled) directly by bcm2048 and wl1251 */ vctcxo: vctcxo { compatible = "fixed-clock"; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 6681d4519e97..a075b63f3087 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -11,13 +11,6 @@ cpus { cpu@0 { cpu0-supply = <&vcc>; - operating-points = < - /* kHz uV */ - 300000 1012500 - 600000 1200000 - 800000 1325000 - 1000000 1375000 - >; }; }; diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index 9886bf8b90ab..31d47a1fad84 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -12,7 +12,7 @@ / { model = "Nokia N950"; - compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3"; + compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap36xx", "ti,omap3"; keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts index 18338576c41d..7f04dfad8203 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts @@ -14,5 +14,5 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Alto35"; - compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts index f204c8af8281..bc5a04e03336 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Chestnut43"; - compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts index c633f7cee68e..065c31cbf0e2 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Gallop43"; - compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts index fb88ebc9858c..e38c1c51392c 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo35"; - compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts index 76cca00d97b6..e6dc23159c4d 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo43"; - compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-summit.dts b/arch/arm/boot/dts/omap3-overo-storm-summit.dts index cc081a9e4c1e..587c08ce282d 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-summit.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-summit.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Summit"; - compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts index 1de41c0826e0..f57de6010994 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts @@ -14,6 +14,6 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi"; - compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts index 9ed13118ed8e..281af6c113be 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts @@ -14,5 +14,5 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on TobiDuo"; - compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts index 81b957f33c9f..ea509956d7ac 100644 --- a/arch/arm/boot/dts/omap3-pandora-1ghz.dts +++ b/arch/arm/boot/dts/omap3-pandora-1ghz.dts @@ -16,7 +16,7 @@ / { model = "Pandora Handheld Console 1GHz"; - compatible = "openpandora,omap3-pandora-1ghz", "ti,omap36xx", "ti,omap3"; + compatible = "openpandora,omap3-pandora-1ghz", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index ec5891718ae6..150d5be42d27 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -226,6 +226,17 @@ gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* GPIO_164 */ }; + /* wl1251 wifi+bt module */ + wlan_en: fixed-regulator-wg7210_en { + compatible = "regulator-fixed"; + regulator-name = "vwlan"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <50000>; + enable-active-high; + gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; + }; + /* wg7210 (wifi+bt module) 32k clock buffer */ wg7210_32k: fixed-regulator-wg7210_32k { compatible = "regulator-fixed"; @@ -522,9 +533,30 @@ /*wp-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;*/ /* GPIO_127 */ }; -/* mmc3 is probed using pdata-quirks to pass wl1251 card data */ &mmc3 { - status = "disabled"; + vmmc-supply = <&wlan_en>; + + bus-width = <4>; + non-removable; + ti,non-removable; + cap-power-off-card; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins>; + + #address-cells = <1>; + #size-cells = <0>; + + wlan: wifi@1 { + compatible = "ti,wl1251"; + + reg = <1>; + + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_21 */ + + ti,wl1251-has-eeprom; + }; }; /* bluetooth*/ diff --git a/arch/arm/boot/dts/omap3-sbc-t3530.dts b/arch/arm/boot/dts/omap3-sbc-t3530.dts index ae96002abb3b..24bf3fd86641 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3530.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3530.dts @@ -8,7 +8,7 @@ / { model = "CompuLab SBC-T3530 with CM-T3530"; - compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3"; + compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap3430", "ti,omap34xx", "ti,omap3"; aliases { display0 = &dvi0; diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts index 7de6df16fc17..eb3893b9535e 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3730.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts @@ -8,7 +8,7 @@ / { model = "CompuLab SBC-T3730 with CM-T3730"; - compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3"; + compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3"; aliases { display0 = &dvi0; diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts index 40a87330e8c3..b6879cdc5c13 100644 --- a/arch/arm/boot/dts/omap3-sniper.dts +++ b/arch/arm/boot/dts/omap3-sniper.dts @@ -9,7 +9,7 @@ / { model = "LG Optimus Black"; - compatible = "lg,omap3-sniper", "ti,omap36xx", "ti,omap3"; + compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-thunder.dts b/arch/arm/boot/dts/omap3-thunder.dts index 6276e7079b36..64221e3b3477 100644 --- a/arch/arm/boot/dts/omap3-thunder.dts +++ b/arch/arm/boot/dts/omap3-thunder.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 Thunder baseboard with TAO3530 SOM"; - compatible = "technexion,omap3-thunder", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; + compatible = "technexion,omap3-thunder", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3"; }; &omap3_pmx_core { diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index db3a2fe84e99..d240e39f2151 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -9,7 +9,7 @@ / { model = "TI Zoom3"; - compatible = "ti,omap3-zoom3", "ti,omap36xx", "ti,omap3"; + compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index 0abd61108a53..7bfde8aac7ae 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3430 SDP"; - compatible = "ti,omap3430-sdp", "ti,omap3"; + compatible = "ti,omap3430-sdp", "ti,omap3430", "ti,omap3"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index 7b09cbee8bb8..c4dd9801840d 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -16,19 +16,67 @@ / { cpus { cpu: cpu@0 { - /* OMAP343x/OMAP35xx variants OPP1-5 */ - operating-points = < - /* kHz uV */ - 125000 975000 - 250000 1075000 - 500000 1200000 - 550000 1270000 - 600000 1350000 - >; + /* OMAP343x/OMAP35xx variants OPP1-6 */ + operating-points-v2 = <&cpu0_opp_table>; + clock-latency = <300000>; /* From legacy driver */ }; }; + /* see Documentation/devicetree/bindings/opp/opp.txt */ + cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + + opp1-125000000 { + opp-hz = /bits/ 64 <125000000>; + /* + * we currently only select the max voltage from table + * Table 3-3 of the omap3530 Data sheet (SPRS507F). + * Format is: <target min max> + */ + opp-microvolt = <975000 975000 975000>; + /* + * first value is silicon revision bit mask + * second one 720MHz Device Identification bit mask + */ + opp-supported-hw = <0xffffffff 3>; + }; + + opp2-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <1075000 1075000 1075000>; + opp-supported-hw = <0xffffffff 3>; + opp-suspend; + }; + + opp3-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1200000 1200000 1200000>; + opp-supported-hw = <0xffffffff 3>; + }; + + opp4-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-microvolt = <1275000 1275000 1275000>; + opp-supported-hw = <0xffffffff 3>; + }; + + opp5-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1350000 1350000 1350000>; + opp-supported-hw = <0xffffffff 3>; + }; + + opp6-720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1350000 1350000 1350000>; + /* only high-speed grade omap3530 devices */ + opp-supported-hw = <0xffffffff 2>; + turbo-mode; + }; + }; + ocp@68000000 { omap3_pmx_core2: pinmux@480025d8 { compatible = "ti,omap3-padconf", "pinctrl-single"; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 1e552f08f120..c618cb257d00 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -19,16 +19,65 @@ }; cpus { - /* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */ + /* OMAP3630/OMAP37xx variants OPP50 to OPP130 and OPP1G */ cpu: cpu@0 { - operating-points = < - /* kHz uV */ - 300000 1012500 - 600000 1200000 - 800000 1325000 - >; - clock-latency = <300000>; /* From legacy driver */ + operating-points-v2 = <&cpu0_opp_table>; + + vbb-supply = <&abb_mpu_iva>; + clock-latency = <300000>; /* From omap-cpufreq driver */ + }; + }; + + /* see Documentation/devicetree/bindings/opp/opp.txt */ + cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + + opp50-300000000 { + opp-hz = /bits/ 64 <300000000>; + /* + * we currently only select the max voltage from table + * Table 4-19 of the DM3730 Data sheet (SPRS685B) + * Format is: cpu0-supply: <target min max> + * vbb-supply: <target min max> + */ + opp-microvolt = <1012500 1012500 1012500>, + <1012500 1012500 1012500>; + /* + * first value is silicon revision bit mask + * second one is "speed binned" bit mask + */ + opp-supported-hw = <0xffffffff 3>; + opp-suspend; + }; + + opp100-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1200000 1200000 1200000>, + <1200000 1200000 1200000>; + opp-supported-hw = <0xffffffff 3>; + }; + + opp130-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1325000 1325000 1325000>, + <1325000 1325000 1325000>; + opp-supported-hw = <0xffffffff 3>; }; + + opp1g-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1375000 1375000 1375000>, + <1375000 1375000 1375000>; + /* only on am/dm37x with speed-binned bit set */ + opp-supported-hw = <0xffffffff 2>; + turbo-mode; + }; + }; + + opp_supply_mpu_iva: opp_supply { + compatible = "ti,omap-opp-supply"; + ti,absolute-max-voltage-uv = <1375000>; }; ocp@68000000 { diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index 4454449de00c..a40fe8d49da6 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -369,7 +369,7 @@ compatible = "ti,wl1285", "ti,wl1283"; reg = <2>; /* gpio_100 with gpmc_wait2 pad as wakeirq */ - interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>, + interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>, <&omap4_pmx_core 0x4e>; interrupt-names = "irq", "wakeup"; ref-clock-frequency = <26000000>; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 14be2ecb62b1..55ea8b6189af 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -474,7 +474,7 @@ compatible = "ti,wl1271"; reg = <2>; /* gpio_53 with gpmc_ncs3 pad as wakeup */ - interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_RISING>, + interrupts-extended = <&gpio2 21 IRQ_TYPE_LEVEL_HIGH>, <&omap4_pmx_core 0x3a>; interrupt-names = "irq", "wakeup"; ref-clock-frequency = <38400000>; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 3c274965ff40..91480ac1f328 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -512,7 +512,7 @@ compatible = "ti,wl1281"; reg = <2>; interrupt-parent = <&gpio1>; - interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */ + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */ ref-clock-frequency = <26000000>; tcxo-clock-frequency = <26000000>; }; diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi index 6dbbc9b3229c..d0032213101e 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi @@ -69,7 +69,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio2>; - interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* gpio 41 */ + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; /* gpio 41 */ ref-clock-frequency = <38400000>; }; }; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 7fff555ee394..68ac04641bdb 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -362,7 +362,7 @@ pinctrl-names = "default"; pinctrl-0 = <&wlcore_irq_pin>; interrupt-parent = <&gpio1>; - interrupts = <14 IRQ_TYPE_EDGE_RISING>; /* gpio 14 */ + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; /* gpio 14 */ ref-clock-frequency = <26000000>; }; }; diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index fac2e57dcca9..4791834dacb2 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -1146,7 +1146,7 @@ }; }; - gpu_cm: clock-controller@1500 { + gpu_cm: gpu_cm@1500 { compatible = "ti,omap4-cm"; reg = <0x1500 0x100>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index a53657b83288..bda454d12150 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/mfd/dbx500-prcmu.h> #include <dt-bindings/arm/ux500_pm_domains.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/thermal/thermal.h> / { #address-cells = <1>; @@ -59,8 +60,12 @@ * cooling. */ cpu_thermal: cpu-thermal { - polling-delay-passive = <0>; - polling-delay = <1000>; + polling-delay-passive = <250>; + /* + * This sensor fires interrupts to update the thermal + * zone, so no polling is needed. + */ + polling-delay = <0>; thermal-sensors = <&thermal>; @@ -79,7 +84,7 @@ cooling-maps { trip = <&cpu_alert>; - cooling-device = <&CPU0 0 2>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; contribution = <100>; }; }; diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index e4a0d51ec3a8..0a3a7d66737b 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -609,13 +609,13 @@ <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */ bias-disable; drive-push-pull; - slew-rate = <3>; + slew-rate = <1>; }; pins2 { pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */ bias-pull-up; drive-push-pull; - slew-rate = <3>; + slew-rate = <1>; }; }; @@ -637,13 +637,13 @@ <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */ bias-disable; drive-push-pull; - slew-rate = <3>; + slew-rate = <1>; }; pins2 { pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */ bias-pull-up; drive-push-pull; - slew-rate = <3>; + slew-rate = <1>; }; }; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 89d29b50c3f4..91fc0a315c49 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -183,14 +183,12 @@ ov5640: camera@3c { compatible = "ovti,ov5640"; - pinctrl-names = "default"; - pinctrl-0 = <&ov5640_pins>; reg = <0x3c>; clocks = <&clk_ext_camera>; clock-names = "xclk"; DOVDD-supply = <&v2v8>; - powerdown-gpios = <&stmfx_pinctrl 18 GPIO_ACTIVE_HIGH>; - reset-gpios = <&stmfx_pinctrl 19 GPIO_ACTIVE_LOW>; + powerdown-gpios = <&stmfx_pinctrl 18 (GPIO_ACTIVE_HIGH | GPIO_PUSH_PULL)>; + reset-gpios = <&stmfx_pinctrl 19 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; rotation = <180>; status = "okay"; @@ -223,15 +221,8 @@ joystick_pins: joystick { pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; - drive-push-pull; bias-pull-down; }; - - ov5640_pins: camera { - pins = "agpio2", "agpio3"; /* stmfx pins 18 & 19 */ - drive-push-pull; - output-low; - }; }; }; }; diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index 9b11654a0a39..f98e0370c0bc 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -932,7 +932,7 @@ interrupt-names = "int0", "int1"; clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; + bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; status = "disabled"; }; @@ -945,7 +945,7 @@ interrupt-names = "int0", "int1"; clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index ce823c44e98a..4c268b70b735 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -520,6 +520,7 @@ interrupts = <39>; clocks = <&ccu CLK_AHB_EHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -529,6 +530,7 @@ interrupts = <64>; clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -608,6 +610,7 @@ interrupts = <40>; clocks = <&ccu CLK_AHB_EHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -617,6 +620,7 @@ interrupts = <65>; clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index cfb1efc8828c..6befa236ba99 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -391,6 +391,7 @@ interrupts = <39>; clocks = <&ccu CLK_AHB_EHCI>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -400,6 +401,7 @@ interrupts = <40>; clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index bbeb743633c6..ac7638078420 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -545,6 +545,7 @@ clocks = <&ccu CLK_AHB1_EHCI0>; resets = <&ccu RST_AHB1_EHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -555,6 +556,7 @@ clocks = <&ccu CLK_AHB1_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_AHB1_OHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -565,6 +567,7 @@ clocks = <&ccu CLK_AHB1_EHCI1>; resets = <&ccu RST_AHB1_EHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -575,6 +578,7 @@ clocks = <&ccu CLK_AHB1_OHCI1>, <&ccu CLK_USB_OHCI1>; resets = <&ccu RST_AHB1_OHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 49380de754a9..8aebefd6accf 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -380,9 +380,8 @@ compatible = "allwinner,sun7i-a20-csi0"; reg = <0x01c09000 0x1000>; interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI0>, - <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>; - clock-names = "bus", "mod", "isp", "ram"; + clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>; + clock-names = "bus", "isp", "ram"; resets = <&ccu RST_CSI0>; status = "disabled"; }; @@ -623,6 +622,7 @@ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_AHB_EHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -632,6 +632,7 @@ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -714,6 +715,7 @@ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_AHB_EHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -723,6 +725,7 @@ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 52eed0ae3607..f292f96ab39b 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -307,6 +307,7 @@ clocks = <&ccu CLK_BUS_EHCI>; resets = <&ccu RST_BUS_EHCI>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -317,6 +318,7 @@ clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>; resets = <&ccu RST_BUS_OHCI>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index 568b90ece342..3bec3e0a81b2 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -192,6 +192,7 @@ vqmmc-supply = <®_dldo1>; non-removable; wakeup-source; + keep-power-in-suspend; status = "okay"; brcmf: wifi@1 { diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 523be6611c50..74bb053cf23c 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -632,6 +632,7 @@ clocks = <&ccu CLK_BUS_EHCI0>; resets = <&ccu RST_BUS_EHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -643,6 +644,7 @@ clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_OHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -654,6 +656,7 @@ clocks = <&ccu CLK_BUS_EHCI1>; resets = <&ccu RST_BUS_EHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index bde068111b85..c9c2688db66d 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -273,6 +273,7 @@ clocks = <&ccu CLK_BUS_EHCI1>; resets = <&ccu RST_BUS_EHCI1>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -284,6 +285,7 @@ <&ccu CLK_USB_OHCI1>; resets = <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -294,6 +296,7 @@ clocks = <&ccu CLK_BUS_EHCI2>; resets = <&ccu RST_BUS_EHCI2>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -305,6 +308,7 @@ <&ccu CLK_USB_OHCI2>; resets = <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index c34d505c7efe..b9b6fb00be28 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -346,6 +346,7 @@ clocks = <&usb_clocks CLK_BUS_HCI0>; resets = <&usb_clocks RST_USB0_HCI>; phys = <&usbphy1>; + phy-names = "usb"; status = "disabled"; }; @@ -357,6 +358,7 @@ <&usb_clocks CLK_USB_OHCI0>; resets = <&usb_clocks RST_USB0_HCI>; phys = <&usbphy1>; + phy-names = "usb"; status = "disabled"; }; @@ -378,6 +380,7 @@ clocks = <&usb_clocks CLK_BUS_HCI1>; resets = <&usb_clocks RST_USB1_HCI>; phys = <&usbphy2>; + phy-names = "usb"; status = "disabled"; }; @@ -407,6 +410,7 @@ clocks = <&usb_clocks CLK_BUS_HCI2>; resets = <&usb_clocks RST_USB2_HCI>; phys = <&usbphy3>; + phy-names = "usb"; status = "disabled"; }; @@ -418,6 +422,7 @@ <&usb_clocks CLK_USB_OHCI2>; resets = <&usb_clocks RST_USB2_HCI>; phys = <&usbphy3>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index eba190b3f9de..107eeafad20a 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -304,6 +304,7 @@ clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>; resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -315,6 +316,7 @@ <&ccu CLK_USB_OHCI1>; resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -325,6 +327,7 @@ clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>; resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -336,6 +339,7 @@ <&ccu CLK_USB_OHCI2>; resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -346,6 +350,7 @@ clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>; resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; phys = <&usbphy 3>; + phy-names = "usb"; status = "disabled"; }; @@ -357,6 +362,7 @@ <&ccu CLK_USB_OHCI3>; resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; phys = <&usbphy 3>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts index dc8a5f37a1ef..c8ebb23c4e02 100644 --- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts +++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts @@ -602,6 +602,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x70>; + i2c-mux-idle-disconnect; sff0_i2c: i2c@1 { #address-cells = <1>; @@ -640,6 +641,7 @@ reg = <0x71>; #address-cells = <1>; #size-cells = <0>; + i2c-mux-idle-disconnect; sff5_i2c: i2c@1 { #address-cells = <1>; |