diff options
Diffstat (limited to 'arch/arm/boot/dts')
32 files changed, 237 insertions, 122 deletions
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index b67f5fee1469..dce5be5df97b 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -729,7 +729,7 @@ &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii-txid"; + phy-mode = "rgmii-id"; }; &tscadc { diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 172c0224e7f6..b128998097ce 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -651,13 +651,13 @@ &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii-txid"; + phy-mode = "rgmii-id"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { phy-handle = <ðphy1>; - phy-mode = "rgmii-txid"; + phy-mode = "rgmii-id"; dual_emac_res_vlan = <2>; }; diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts index 5cdaf0cd9401..bfbe27a80006 100644 --- a/arch/arm/boot/dts/am335x-shc.dts +++ b/arch/arm/boot/dts/am335x-shc.dts @@ -213,7 +213,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; bus-width = <0x4>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; cd-inverted; max-frequency = <26000000>; vmmc-supply = <&vmmcsd_fixed>; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi index 1b0d0680c8b6..0d81600ca247 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dtsi +++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi @@ -93,6 +93,7 @@ bm,pool-long = <2>; bm,pool-short = <1>; buffer-manager = <&bm>; + phys = <&comphy1 1>; phy-mode = "sgmii"; status = "okay"; }; @@ -103,6 +104,7 @@ bm,pool-short = <1>; buffer-manager = <&bm>; managed = "in-band-status"; + phys = <&comphy5 2>; phy-mode = "sgmii"; sfp = <&sfp>; status = "okay"; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 746887f7be5a..96c18703e471 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -337,6 +337,43 @@ #clock-cells = <1>; }; + comphy: phy@18300 { + compatible = "marvell,armada-380-comphy"; + reg = <0x18300 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + comphy2: phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + + comphy3: phy@3 { + reg = <3>; + #phy-cells = <1>; + }; + + comphy4: phy@4 { + reg = <4>; + #phy-cells = <1>; + }; + + comphy5: phy@5 { + reg = <5>; + #phy-cells = <1>; + }; + }; + coreclk: mvebu-sar@18600 { compatible = "marvell,armada-380-core-clock"; reg = <0x18600 0x04>; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index f3ac7483afed..5d04dc68cf57 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -144,30 +144,32 @@ status = "okay"; }; - nand@d0000 { + nand-controller@d0000 { status = "okay"; - label = "pxa3xx_nand-0"; - num-cs = <1>; - marvell,nand-keep-config; - nand-on-flash-bbt; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "U-Boot"; - reg = <0 0x800000>; - }; - partition@800000 { - label = "Linux"; - reg = <0x800000 0x800000>; - }; - partition@1000000 { - label = "Filesystem"; - reg = <0x1000000 0x3f000000>; + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + nand-on-flash-bbt; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x800000>; + }; + partition@800000 { + label = "Linux"; + reg = <0x800000 0x800000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 1139e9469a83..b4cca507cf13 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -160,12 +160,15 @@ status = "okay"; }; - nand@d0000 { + nand-controller@d0000 { status = "okay"; - label = "pxa3xx_nand-0"; - num-cs = <1>; - marvell,nand-keep-config; - nand-on-flash-bbt; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + nand-on-flash-bbt; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index bbbb38888bb8..87dcb502f72d 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -81,49 +81,52 @@ }; - nand@d0000 { + nand-controller@d0000 { status = "okay"; - label = "pxa3xx_nand-0"; - num-cs = <1>; - marvell,nand-keep-config; - nand-on-flash-bbt; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x00000000 0x000e0000>; - read-only; - }; - - partition@e0000 { - label = "u-boot-env"; - reg = <0x000e0000 0x00020000>; - read-only; - }; - - partition@100000 { - label = "u-boot-env2"; - reg = <0x00100000 0x00020000>; - read-only; - }; - - partition@120000 { - label = "zImage"; - reg = <0x00120000 0x00400000>; - }; - - partition@520000 { - label = "initrd"; - reg = <0x00520000 0x00400000>; - }; - partition@e00000 { - label = "boot"; - reg = <0x00e00000 0x3f200000>; + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + nand-on-flash-bbt; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x000e0000>; + read-only; + }; + + partition@e0000 { + label = "u-boot-env"; + reg = <0x000e0000 0x00020000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env2"; + reg = <0x00100000 0x00020000>; + read-only; + }; + + partition@120000 { + label = "zImage"; + reg = <0x00120000 0x00400000>; + }; + + partition@520000 { + label = "initrd"; + reg = <0x00520000 0x00400000>; + }; + + partition@e00000 { + label = "boot"; + reg = <0x00e00000 0x3f200000>; + }; }; }; }; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 47aa53ba6b92..559659b399d0 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -476,7 +476,7 @@ clocksource: timer@20000 { compatible = "ti,da830-timer"; reg = <0x20000 0x1000>; - interrupts = <12>, <13>; + interrupts = <21>, <22>; interrupt-names = "tint12", "tint34"; clocks = <&pll0_auxclk>; }; diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts index cc0c3cf89eaa..592111c8d6fd 100644 --- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts +++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts @@ -443,7 +443,7 @@ }; display-controller@6a000000 { - status = "disabled"; + status = "okay"; port@0 { reg = <0>; diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts index 5edf858c8b86..a31b17eaf51c 100644 --- a/arch/arm/boot/dts/imx6q-pistachio.dts +++ b/arch/arm/boot/dts/imx6q-pistachio.dts @@ -103,7 +103,7 @@ power { label = "Power Button"; gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; - gpio-key,wakeup; + wakeup-source; linux,code = <KEY_POWER>; }; }; diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts index d8163705363e..4a31a415f88e 100644 --- a/arch/arm/boot/dts/imx6sll-evk.dts +++ b/arch/arm/boot/dts/imx6sll-evk.dts @@ -309,7 +309,7 @@ pinctrl-2 = <&pinctrl_usdhc3_200mhz>; cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; vmmc-supply = <®_sd3_vmmc>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index ecf3f3e5c0a0..5b16e65f7696 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -467,7 +467,7 @@ }; gpt: gpt@2098000 { - compatible = "fsl,imx6sx-gpt", "fsl,imx31-gpt"; + compatible = "fsl,imx6sx-gpt", "fsl,imx6dl-gpt"; reg = <0x02098000 0x4000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_GPT_BUS>, diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 114e41e290e9..b4f2723ecd86 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -719,6 +719,7 @@ fsl,tmr-fiper1 = <999999995>; fsl,tmr-fiper2 = <99990>; fsl,max-adj = <499999999>; + fsl,extts-fifo; }; enet0: ethernet@2d10000 { diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index cc30799a17d2..6f54a8897574 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -282,7 +282,7 @@ compatible = "amlogic,meson6-dwmac", "snps,dwmac"; reg = <0xc9410000 0x10000 0xc1108108 0x4>; - interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts index 624d461178cc..3ca9638fad09 100644 --- a/arch/arm/boot/dts/meson8b-ec100.dts +++ b/arch/arm/boot/dts/meson8b-ec100.dts @@ -283,8 +283,7 @@ cap-sd-highspeed; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vcc_3v3>; }; diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index f1b482db8072..3b0e0f8fbc23 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -227,7 +227,6 @@ /* Realtek RTL8211F (0x001cc916) */ eth_phy: ethernet-phy@0 { reg = <0>; - eee-broken-1000t; interrupt-parent = <&gpio_intc>; /* GPIOH_3 */ interrupts = <17 IRQ_TYPE_LEVEL_LOW>; @@ -279,8 +278,7 @@ cap-sd-highspeed; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&tflash_vdd>; vqmmc-supply = <&tf_io>; diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts index 63fe08b55b17..29d830ae4bf4 100644 --- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts +++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts @@ -212,8 +212,7 @@ cap-sd-highspeed; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vcc_3v3>; }; diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi index ddc7a7bb33c0..f57acf8f66b9 100644 --- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi +++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi @@ -105,7 +105,7 @@ interrupts-extended = < &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0 &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0 - &cpcap 48 1 + &cpcap 48 0 >; interrupt-names = "id_ground", "id_float", "se0conn", "vbusvld", diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 2a8fcc09094d..04f2b53d4d3d 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -751,11 +751,7 @@ vdda-supply = <&vdac>; - #address-cells = <1>; - #size-cells = <0>; - port { - reg = <0>; venc_out: endpoint { remote-endpoint = <&opa_in>; ti,channels = <1>; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 182a53991c90..826920e6b878 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -814,7 +814,7 @@ /* For debugging, it is often good idea to remove this GPIO. It means you can remove back cover (to reboot by removing battery) and still use the MMC card. */ - cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */ + cd-gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */ }; /* most boards use vaux3, only some old versions use vmmc2 instead */ diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 0d9b85317529..e142e6c70a59 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -370,6 +370,19 @@ compatible = "ti,omap2-onenand"; reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */ + /* + * These timings are based on CONFIG_OMAP_GPMC_DEBUG=y reported + * bootloader set values when booted with v4.19 using both N950 + * and N9 devices (OneNAND Manufacturer: Samsung): + * + * gpmc cs0 before gpmc_cs_program_settings: + * cs0 GPMC_CS_CONFIG1: 0xfd001202 + * cs0 GPMC_CS_CONFIG2: 0x00181800 + * cs0 GPMC_CS_CONFIG3: 0x00030300 + * cs0 GPMC_CS_CONFIG4: 0x18001804 + * cs0 GPMC_CS_CONFIG5: 0x03171d1d + * cs0 GPMC_CS_CONFIG6: 0x97080000 + */ gpmc,sync-read; gpmc,sync-write; gpmc,burst-length = <16>; @@ -379,26 +392,27 @@ gpmc,device-width = <2>; gpmc,mux-add-data = <2>; gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <87>; - gpmc,cs-wr-off-ns = <87>; + gpmc,cs-rd-off-ns = <122>; + gpmc,cs-wr-off-ns = <122>; gpmc,adv-on-ns = <0>; - gpmc,adv-rd-off-ns = <10>; - gpmc,adv-wr-off-ns = <10>; - gpmc,oe-on-ns = <15>; - gpmc,oe-off-ns = <87>; + gpmc,adv-rd-off-ns = <15>; + gpmc,adv-wr-off-ns = <15>; + gpmc,oe-on-ns = <20>; + gpmc,oe-off-ns = <122>; gpmc,we-on-ns = <0>; - gpmc,we-off-ns = <87>; - gpmc,rd-cycle-ns = <112>; - gpmc,wr-cycle-ns = <112>; - gpmc,access-ns = <81>; + gpmc,we-off-ns = <122>; + gpmc,rd-cycle-ns = <148>; + gpmc,wr-cycle-ns = <148>; + gpmc,access-ns = <117>; gpmc,page-burst-access-ns = <15>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,wait-monitoring-ns = <0>; - gpmc,clk-activation-ns = <5>; - gpmc,wr-data-mux-bus-ns = <30>; - gpmc,wr-access-ns = <81>; - gpmc,sync-clk-ps = <15000>; + gpmc,clk-activation-ns = <10>; + gpmc,wr-data-mux-bus-ns = <40>; + gpmc,wr-access-ns = <117>; + + gpmc,sync-clk-ps = <15000>; /* TBC; Where this value came? */ /* * MTD partition table corresponding to Nokia's MeeGo 1.2 diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index 838aa3445fbe..e21ec929f096 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -648,6 +648,17 @@ }; }; +/* Configure pwm clock source for timers 8 & 9 */ +&timer8 { + assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; + assigned-clock-parents = <&sys_clkin_ck>; +}; + +&timer9 { + assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; + assigned-clock-parents = <&sys_clkin_ck>; +}; + /* * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for * uart1 wakeirq. diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index bc853ebeda22..61a06f6add3c 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -317,7 +317,8 @@ palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins { pinctrl-single,pins = < - OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1 */ + /* sys_nirq1 is pulled down as the SoC is inverting it for GIC */ + OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) >; }; @@ -385,7 +386,8 @@ palmas: palmas@48 { compatible = "ti,palmas"; - interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ + /* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */ + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>; reg = <0x48>; interrupt-controller; #interrupt-cells = <2>; @@ -651,7 +653,8 @@ pinctrl-names = "default"; pinctrl-0 = <&twl6040_pins>; - interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */ + /* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */ + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_LOW>; /* audpwron gpio defined in the board specific dts */ diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index 5e21fb430a65..e78d3718f145 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -181,6 +181,13 @@ OMAP5_IOPAD(0x0042, PIN_INPUT_PULLDOWN | MUX_MODE6) /* llib_wakereqin.gpio1_wk15 */ >; }; + + palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins { + pinctrl-single,pins = < + /* sys_nirq1 is pulled down as the SoC is inverting it for GIC */ + OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) + >; + }; }; &omap5_pmx_core { @@ -414,8 +421,11 @@ palmas: palmas@48 { compatible = "ti,palmas"; - interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ reg = <0x48>; + pinctrl-0 = <&palmas_sys_nirq_pins>; + pinctrl-names = "default"; + /* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */ + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; ti,system-power-controller; diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi index 9c7e309d9c2c..0960348002ad 100644 --- a/arch/arm/boot/dts/omap5-l4.dtsi +++ b/arch/arm/boot/dts/omap5-l4.dtsi @@ -1046,8 +1046,6 @@ <SYSC_IDLE_SMART>, <SYSC_IDLE_SMART_WKUP>; ti,syss-mask = <1>; - ti,no-reset-on-init; - ti,no-idle-on-init; /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ clocks = <&l4per_clkctrl OMAP5_UART3_CLKCTRL 0>; clock-names = "fck"; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 24e6c2b67473..de981d629bdd 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -1660,15 +1660,12 @@ du: display@feb00000 { compatible = "renesas,du-r8a7743"; - reg = <0 0xfeb00000 0 0x40000>, - <0 0xfeb90000 0 0x1c>; - reg-names = "du", "lvds.0"; + reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 726>; - clock-names = "du.0", "du.1", "lvds.0"; + <&cpg CPG_MOD 723>; + clock-names = "du.0", "du.1"; status = "disabled"; ports { @@ -1683,6 +1680,33 @@ port@1 { reg = <1>; du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a7743-lvds"; + reg = <0 0xfeb90000 0 0x1c>; + clocks = <&cpg CPG_MOD 726>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 726>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { }; }; }; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 4acb501dd3f8..3ed49898f4b2 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -719,7 +719,6 @@ pm_qos = <&qos_lcdc0>, <&qos_lcdc1>, <&qos_cif0>, - <&qos_cif1>, <&qos_ipp>, <&qos_rga>; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 353d90f99b40..13304b8c5139 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -216,6 +216,7 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; + clock-output-names = "osc24M"; }; osc32k: clk-32k { diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts index 5d23667dc2d2..25540b7694d5 100644 --- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts +++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts @@ -53,7 +53,7 @@ aliases { serial0 = &uart0; - /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ + ethernet0 = &emac; ethernet1 = &sdiowifi; }; diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index 4dd4d13aa8f5..a1acd872bcf2 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -13,10 +13,25 @@ stdout-path = "serial0:115200n8"; }; - memory@80000000 { + /* + * Note that recent version of the device tree compiler (starting with + * version 1.4.2) warn about this node containing a reg property, but + * missing a unit-address. However, the bootloader on these Chromebook + * devices relies on the full name of this node to be exactly /memory. + * Adding the unit-address causes the bootloader to create a /memory + * node and write the memory bank configuration to that node, which in + * turn leads the kernel to believe that the device has 2 GiB of + * memory instead of the amount detected by the bootloader. + * + * The name of this node is effectively ABI and must not be changed. + */ + memory { + device_type = "memory"; reg = <0x0 0x80000000 0x0 0x80000000>; }; + /delete-node/ memory@80000000; + host1x@50000000 { hdmi@54280000 { status = "okay"; diff --git a/arch/arm/boot/dts/vf610-bk4.dts b/arch/arm/boot/dts/vf610-bk4.dts index fe496f220871..3fa0cbe456db 100644 --- a/arch/arm/boot/dts/vf610-bk4.dts +++ b/arch/arm/boot/dts/vf610-bk4.dts @@ -133,11 +133,11 @@ bus-num = <3>; status = "okay"; spi-slave; + #address-cells = <0>; - slave@0 { + slave { compatible = "lwn,bk4"; spi-max-frequency = <30000000>; - reg = <0>; }; }; |