diff options
Diffstat (limited to 'arch/arm/boot/dts')
736 files changed, 35109 insertions, 14507 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index c558ba75cbcc..011808490fed 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -48,11 +48,13 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ at91-kizbox2.dtb \ at91-sama5d2_xplained.dtb \ at91-sama5d3_xplained.dtb \ + at91-tse850-3.dtb \ sama5d31ek.dtb \ sama5d33ek.dtb \ sama5d34ek.dtb \ sama5d35ek.dtb \ sama5d36ek.dtb \ + sama5d36ek_cmp.dtb \ at91-sama5d4_ma5d4evk.dtb \ at91-sama5d4_xplained.dtb \ at91-sama5d4ek.dtb \ @@ -75,6 +77,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-asus-rt-ac56u.dtb \ bcm4708-asus-rt-ac68u.dtb \ bcm4708-buffalo-wzr-1750dhp.dtb \ + bcm4708-luxul-xap-1510.dtb \ bcm4708-luxul-xwc-1000.dtb \ bcm4708-netgear-r6250.dtb \ bcm4708-netgear-r6300-v2.dtb \ @@ -82,15 +85,22 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm47081-asus-rt-n18u.dtb \ bcm47081-buffalo-wzr-600dhp2.dtb \ bcm47081-buffalo-wzr-900dhp.dtb \ + bcm47081-luxul-xap-1410.dtb \ + bcm47081-luxul-xwr-1200.dtb \ bcm4709-asus-rt-ac87u.dtb \ bcm4709-buffalo-wxr-1900dhp.dtb \ bcm4709-netgear-r7000.dtb \ bcm4709-netgear-r8000.dtb \ + bcm4709-tplink-archer-c9-v1.dtb \ bcm47094-dlink-dir-885l.dtb \ + bcm47094-luxul-xwr-3100.dtb \ + bcm47094-netgear-r8500.dtb \ bcm94708.dtb \ bcm94709.dtb \ bcm953012er.dtb \ bcm953012k.dtb +dtb-$(CONFIG_ARCH_BCM_53573) += \ + bcm47189-tenda-ac9.dtb dtb-$(CONFIG_ARCH_BCM_63XX) += \ bcm963138dvt.dtb dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \ @@ -122,7 +132,8 @@ dtb-$(CONFIG_ARCH_CLPS711X) += \ dtb-$(CONFIG_ARCH_DAVINCI) += \ da850-lcdk.dtb \ da850-enbw-cmc.dtb \ - da850-evm.dtb + da850-evm.dtb \ + da850-lego-ev3.dtb dtb-$(CONFIG_ARCH_DIGICOLOR) += \ cx92755_equinox.dtb dtb-$(CONFIG_ARCH_EFM32) += \ @@ -136,6 +147,7 @@ dtb-$(CONFIG_ARCH_EXYNOS4) += \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ exynos4210-universal_c210.dtb \ + exynos4412-itop-elite.dtb \ exynos4412-odroidu3.dtb \ exynos4412-odroidx.dtb \ exynos4412-odroidx2.dtb \ @@ -330,6 +342,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-aristainetos_7.dtb \ imx6dl-aristainetos2_4.dtb \ imx6dl-aristainetos2_7.dtb \ + imx6dl-colibri-eval-v3.dtb \ imx6dl-cubox-i.dtb \ imx6dl-dfi-fs700-m60.dtb \ imx6dl-gw51xx.dtb \ @@ -340,6 +353,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-gw552x.dtb \ imx6dl-gw553x.dtb \ imx6dl-hummingboard.dtb \ + imx6dl-icore.dtb \ + imx6dl-icore-rqs.dtb \ imx6dl-nit6xlite.dtb \ imx6dl-nitrogen6x.dtb \ imx6dl-phytec-pbab01.dtb \ @@ -348,6 +363,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-sabreauto.dtb \ imx6dl-sabrelite.dtb \ imx6dl-sabresd.dtb \ + imx6dl-savageboard.dtb \ imx6dl-ts4900.dtb \ imx6dl-tx6dl-comtft.dtb \ imx6dl-tx6s-8034.dtb \ @@ -381,16 +397,20 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-gw553x.dtb \ imx6q-h100.dtb \ imx6q-hummingboard.dtb \ + imx6q-icore.dtb \ imx6q-icore-rqs.dtb \ imx6q-marsboard.dtb \ + imx6q-mccmon6.dtb \ imx6q-nitrogen6x.dtb \ imx6q-nitrogen6_max.dtb \ + imx6q-nitrogen6_som2.dtb \ imx6q-novena.dtb \ imx6q-phytec-pbab01.dtb \ imx6q-rex-pro.dtb \ imx6q-sabreauto.dtb \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb \ + imx6q-savageboard.dtb \ imx6q-sbc6x.dtb \ imx6q-tbs2910.dtb \ imx6q-ts4900.dtb \ @@ -416,14 +436,22 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-sabreauto.dtb \ imx6sx-sdb-reva.dtb \ imx6sx-sdb-sai.dtb \ - imx6sx-sdb.dtb + imx6sx-sdb.dtb \ + imx6sx-udoo-neo-basic.dtb \ + imx6sx-udoo-neo-extended.dtb \ + imx6sx-udoo-neo-full.dtb dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-14x14-evk.dtb \ imx6ul-geam-kit.dtb \ + imx6ul-isiot-emmc.dtb \ + imx6ul-isiot-nand.dtb \ + imx6ul-liteboard.dtb \ + imx6ul-opos6uldev.dtb \ imx6ul-pico-hobbit.dtb \ imx6ul-tx6ul-0010.dtb \ imx6ul-tx6ul-0011.dtb \ - imx6ul-tx6ul-mainboard.dtb + imx6ul-tx6ul-mainboard.dtb \ + imx6ull-14x14-evk.dtb dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ imx7d-colibri-eval-v3.dtb \ @@ -442,7 +470,8 @@ dtb-$(CONFIG_SOC_VF610) += \ vf610-cosmic.dtb \ vf610m4-cosmic.dtb \ vf610-twr.dtb \ - vf610-zii-dev-rev-b.dtb + vf610-zii-dev-rev-b.dtb \ + vf610-zii-dev-rev-c.dtb dtb-$(CONFIG_ARCH_MXS) += \ imx23-evk.dtb \ imx23-olinuxino.dtb \ @@ -485,6 +514,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ am3517-evm.dtb \ am3517_mt_ventoux.dtb \ logicpd-torpedo-37xx-devkit.dtb \ + logicpd-som-lv-37xx-devkit.dtb \ omap3430-sdp.dtb \ omap3-beagle.dtb \ omap3-beagle-xm.dtb \ @@ -547,7 +577,9 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-base0033.dtb \ am335x-bone.dtb \ am335x-boneblack.dtb \ + am335x-boneblack-wireless.dtb \ am335x-bonegreen.dtb \ + am335x-bonegreen-wireless.dtb \ am335x-chiliboard.dtb \ am335x-cm-t335.dtb \ am335x-evm.dtb \ @@ -556,11 +588,13 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-lxm.dtb \ am335x-nano.dtb \ am335x-pepper.dtb \ + am335x-phycore-rdk.dtb \ am335x-shc.dtb \ am335x-sbc-t335.dtb \ am335x-sl50.dtb \ am335x-wega-rdk.dtb dtb-$(CONFIG_ARCH_OMAP4) += \ + omap4-droid4-xt894.dtb \ omap4-duovero-parlor.dtb \ omap4-kc1.dtb \ omap4-panda.dtb \ @@ -588,15 +622,18 @@ dtb-$(CONFIG_SOC_DRA7XX) += \ am57xx-cl-som-am57x.dtb \ am57xx-sbc-am57x.dtb \ am572x-idk.dtb \ + am571x-idk.dtb \ dra7-evm.dtb \ dra72-evm.dtb \ - dra72-evm-revc.dtb + dra72-evm-revc.dtb \ + dra71-evm.dtb dtb-$(CONFIG_ARCH_ORION5X) += \ orion5x-kuroboxpro.dtb \ orion5x-lacie-d2-network.dtb \ orion5x-lacie-ethernet-disk-mini-v2.dtb \ orion5x-linkstation-lsgl.dtb \ orion5x-linkstation-lswtgl.dtb \ + orion5x-linkstation-lschl.dtb \ orion5x-lswsgl.dtb \ orion5x-maxtor-shared-storage-2.dtb \ orion5x-netgear-wnr854t.dtb \ @@ -604,7 +641,8 @@ dtb-$(CONFIG_ARCH_ORION5X) += \ dtb-$(CONFIG_ARCH_PRIMA2) += \ prima2-evb.dtb dtb-$(CONFIG_ARCH_OXNAS) += \ - wd-mbwe.dtb + wd-mbwe.dtb \ + cloudengines-pogoplug-series-3.dtb dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8060-dragonboard.dtb \ qcom-apq8064-arrow-sd-600eval.dtb \ @@ -620,7 +658,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8974-lge-nexus5-hammerhead.dtb \ - qcom-msm8974-sony-xperia-honami.dtb + qcom-msm8974-sony-xperia-honami.dtb \ + qcom-mdm9615-wp8548-mangoh-green.dtb dtb-$(CONFIG_ARCH_REALVIEW) += \ arm-realview-pb1176.dtb \ arm-realview-pb11mp.dtb \ @@ -635,11 +674,14 @@ dtb-$(CONFIG_ARCH_REALVIEW) += \ arm-realview-pba8.dtb \ arm-realview-pbx-a9.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ + rk1108-evb.dtb \ rk3036-evb.dtb \ rk3036-kylin.dtb \ rk3066a-bqcurie2.dtb \ rk3066a-marsboard.dtb \ + rk3066a-mk808.dtb \ rk3066a-rayeager.dtb \ + rk3188-px3-evb.dtb \ rk3188-radxarock.dtb \ rk3228-evb.dtb \ rk3229-evb.dtb \ @@ -677,6 +719,8 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ r7s72100-rskrza1.dtb \ r8a73a4-ape6evm.dtb \ r8a7740-armadillo800eva.dtb \ + r8a7743-sk-rzg1m.dtb \ + r8a7745-sk-rzg1e.dtb \ r8a7778-bockw.dtb \ r8a7779-marzen.dtb \ r8a7790-lager.dtb \ @@ -690,12 +734,15 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ sh73a0-kzm9g.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_arria5_socdk.dtb \ + socfpga_arria10_socdk_nand.dtb \ + socfpga_arria10_socdk_qspi.dtb \ socfpga_arria10_socdk_sdmmc.dtb \ socfpga_cyclone5_mcvevk.dtb \ socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_de0_sockit.dtb \ socfpga_cyclone5_sockit.dtb \ socfpga_cyclone5_socrates.dtb \ + socfpga_cyclone5_sodia.dtb \ socfpga_cyclone5_vining_fpga.dtb \ socfpga_vt.dtb dtb-$(CONFIG_ARCH_SPEAR13XX) += \ @@ -712,16 +759,12 @@ dtb-$(CONFIG_ARCH_STI) += \ stih407-b2120.dtb \ stih410-b2120.dtb \ stih410-b2260.dtb \ - stih415-b2000.dtb \ - stih415-b2020.dtb \ - stih416-b2000.dtb \ - stih416-b2020.dtb \ - stih416-b2020e.dtb \ stih418-b2199.dtb dtb-$(CONFIG_ARCH_STM32)+= \ stm32f429-disco.dtb \ stm32f469-disco.dtb \ - stm32429i-eval.dtb + stm32429i-eval.dtb \ + stm32746g-eval.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-ba10-tvbox.dtb \ @@ -756,10 +799,12 @@ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a13-empire-electronix-m712.dtb \ sun5i-a13-hsg-h702.dtb \ sun5i-a13-inet-98v-rev2.dtb \ + sun5i-a13-licheepi-one.dtb \ sun5i-a13-olinuxino.dtb \ sun5i-a13-olinuxino-micro.dtb \ sun5i-a13-q8-tablet.dtb \ sun5i-a13-utoo-p66.dtb \ + sun5i-gr8-chip-pro.dtb \ sun5i-gr8-evb.dtb \ sun5i-r8-chip.dtb dtb-$(CONFIG_MACH_SUN6I) += \ @@ -818,7 +863,10 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a33-sinlinx-sina33.dtb \ sun8i-a83t-allwinner-h8homlet-v2.dtb \ sun8i-a83t-cubietruck-plus.dtb \ + sun8i-h2-plus-orangepi-zero.dtb \ sun8i-h3-bananapi-m2-plus.dtb \ + sun8i-h3-beelink-x2.dtb \ + sun8i-h3-nanopi-m1.dtb \ sun8i-h3-nanopi-neo.dtb \ sun8i-h3-orangepi-2.dtb \ sun8i-h3-orangepi-lite.dtb \ @@ -827,7 +875,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-orangepi-pc-plus.dtb \ sun8i-h3-orangepi-plus.dtb \ sun8i-h3-orangepi-plus2e.dtb \ - sun8i-r16-parrot.dtb + sun8i-r16-parrot.dtb \ + sun8i-v3s-licheepi-zero.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb @@ -897,6 +946,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \ wm8750-apc8750.dtb \ wm8850-w70v2.dtb dtb-$(CONFIG_ARCH_ZYNQ) += \ + zynq-microzed.dtb \ zynq-parallella.dtb \ zynq-zc702.dtb \ zynq-zc706.dtb \ @@ -920,7 +970,10 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \ armada-385-db-ap.dtb \ armada-385-linksys-caiman.dtb \ armada-385-linksys-cobra.dtb \ + armada-385-turris-omnia.dtb \ armada-388-clearfog.dtb \ + armada-388-clearfog-base.dtb \ + armada-388-clearfog-pro.dtb \ armada-388-db.dtb \ armada-388-gp.dtb \ armada-388-rd.dtb @@ -929,6 +982,8 @@ dtb-$(CONFIG_MACH_ARMADA_39X) += \ dtb-$(CONFIG_MACH_ARMADA_XP) += \ armada-xp-axpwifiap.dtb \ armada-xp-db.dtb \ + armada-xp-db-dxbc2.dtb \ + armada-xp-db-xc3-24g4xg.dtb \ armada-xp-gp.dtb \ armada-xp-lenovo-ix4-300d.dtb \ armada-xp-linksys-mamba.dtb \ @@ -953,6 +1008,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt8135-evbp1.dtb dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb dtb-$(CONFIG_ARCH_ASPEED) += aspeed-bmc-opp-palmetto.dtb \ + aspeed-bmc-opp-romulus.dtb \ aspeed-ast2500-evb.dtb endif diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/alpine.dtsi index db8752fc480e..d0eefc3b886c 100644 --- a/arch/arm/boot/dts/alpine.dtsi +++ b/arch/arm/boot/dts/alpine.dtsi @@ -93,7 +93,7 @@ interrupt-controller; reg = <0x0 0xfb001000 0x0 0x1000>, <0x0 0xfb002000 0x0 0x2000>, - <0x0 0xfb004000 0x0 0x1000>, + <0x0 0xfb004000 0x0 0x2000>, <0x0 0xfb006000 0x0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts index a9a97307d66c..501c7527121b 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts @@ -54,16 +54,22 @@ dr_mode = "host"; }; +&davinci_mdio { + phy0: ethernet-phy@0 { + reg = <1>; + }; +}; + &cpsw_emac0 { - phy_id = <&davinci_mdio>, <1>; phy-mode = "rmii"; dual_emac_res_vlan = <1>; + phy-handle = <&phy0>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <7>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <2>; + phy-handle = <&phy1>; }; &phy_sel { diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts index fe002a17c04b..19f53b8569e1 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts @@ -109,9 +109,9 @@ }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <7>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <2>; + phy-handle = <&phy1>; }; &phy_sel { diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts index d0faa7b8c5da..2b9d7f4db23f 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts @@ -114,7 +114,7 @@ &usb1 { status = "okay"; - dr_mode = "otg"; + dr_mode = "host"; }; &cpsw_emac0 { @@ -127,9 +127,9 @@ }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <7>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <2>; + phy-handle = <&phy1>; }; &phy_sel { diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index dd45d172a892..efb5eae290a8 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -364,11 +364,14 @@ }; &davinci_mdio { + status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; + phy1: ethernet-phy@1 { + reg = <7>; + }; }; &mmc1 { @@ -406,3 +409,7 @@ &gpio0 { ti,no-reset-on-init; }; + +&gpio3 { + ti,no-reset-on-init; +}; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 007b5e5a51a9..bf6b26abe35b 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -207,6 +207,8 @@ &usb0 { status = "okay"; dr_mode = "peripheral"; + interrupts-extended = <&intc 18 &tps 0>; + interrupt-names = "mc", "vbus"; }; &usb1 { @@ -310,8 +312,23 @@ * by the hardware problems. (Tip: double-check by performing a current * measurement after shutdown: it should be less than 1 mA.) */ + + interrupts = <7>; /* NMI */ + interrupt-parent = <&intc>; + ti,pmic-shutdown-controller; + charger { + interrupts = <0>, <1>; + interrupt-names = "USB", "AC"; + status = "okay"; + }; + + pwrbutton { + interrupts = <2>; + status = "okay"; + }; + regulators { dcdc1_reg: regulator@0 { regulator-name = "vdds_dpr"; @@ -393,3 +410,8 @@ &sham { status = "okay"; }; + +&rtc { + clocks = <&clk_32768_ck>, <&clkdiv32k_ick>; + clock-names = "ext-clk", "int-clk"; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi new file mode 100644 index 000000000000..325daae40278 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi @@ -0,0 +1,163 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/display/tda998x.h> + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&am33xx_pinmux { + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + >; + }; + + mcasp0_pins: mcasp0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ + AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ + AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + >; + }; +}; + +&lcdc { + status = "okay"; + + /* If you want to get 24 bit RGB and 16 BGR mode instead of + * current 16 bit RGB and 24 BGR modes, set the propety + * below to "crossed" and uncomment the video-ports -property + * in tda19988 node. + */ + blue-and-red-wiring = "straight"; + + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&i2c0 { + tda19988: tda19988 { + compatible = "nxp,tda998x"; + reg = <0x70>; + + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + + /* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */ + /* video-ports = <0x234501>; */ + + #sound-dai-cells = <0>; + audio-ports = < TDA998x_I2S 0x03>; + + ports { + port@0 { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; + }; +}; + +&rtc { + system-power-controller; +}; + +&mcasp0 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + status = "okay"; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; + +/ { + clk_mcasp0_fixed: clk_mcasp0_fixed { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + + clk_mcasp0: clk_mcasp0 { + #clock-cells = <0>; + compatible = "gpio-gate-clock"; + clocks = <&clk_mcasp0_fixed>; + enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */ + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "TI BeagleBone Black"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink0_master>; + simple-audio-card,frame-master = <&dailink0_master>; + + dailink0_master: simple-audio-card,cpu { + sound-dai = <&mcasp0>; + clocks = <&clk_mcasp0>; + }; + + simple-audio-card,codec { + sound-dai = <&tda19988>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts new file mode 100644 index 000000000000..105bd10655f7 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts @@ -0,0 +1,109 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am335x-boneblack-common.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "TI AM335x BeagleBone Black Wireless"; + compatible = "ti,am335x-bone-black-wireless", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; + + wlan_en_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us= <70000>; + + /* WL_EN */ + gpio = <&gpio3 9 0>; + enable-active-high; + }; +}; + +&am33xx_pinmux { + bt_pins: pinmux_bt_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gmii1_txd0.gpio0_28 - BT_EN */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE6 ) /* (L15) gmii1_rxd1.mmc2_clk */ + AM33XX_IOPAD(0x914, PIN_INPUT_PULLUP | MUX_MODE6 ) /* (J16) gmii1_txen.mmc2_cmd */ + AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (J17) gmii1_rxdv.mmc2_dat0 */ + AM33XX_IOPAD(0x91c, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (J18) gmii1_txd3.mmc2_dat1 */ + AM33XX_IOPAD(0x920, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (K15) gmii1_txd2.mmc2_dat2 */ + AM33XX_IOPAD(0x908, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (H16) gmii1_col.mmc2_dat3 */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* gmii1_rxd3.uart3_rxd */ + AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gmii1_rxd2.uart3_txd */ + AM33XX_IOPAD(0x948, PIN_INPUT | MUX_MODE3) /* mdio_data.uart3_ctsn */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* mdio_clk.uart3_rtsn */ + >; + }; + + wl18xx_pins: pinmux_wl18xx_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gmii1_txclk.gpio3_9 WL_EN */ + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_refclk.gpio0_29 WL_IRQ */ + AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gmii1_rxclk.gpio3_10 LS_BUF_EN */ + >; + }; +}; + +&mac { + status = "disabled"; +}; + +&mmc3 { + dmas = <&edma_xbar 12 0 1 + &edma_xbar 13 0 2>; + dma-names = "tx", "rx"; + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + non-removable; + cap-power-off-card; + ti,needs-special-hs-handling; + keep-power-in-suspend; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins &wl18xx_pins>; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio0>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins &bt_pins>; + status = "okay"; +}; + +&gpio3 { + ls_buf_en { + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "LS_BUF_EN"; + }; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 6bbb1fee0868..77273df1a028 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -9,151 +9,9 @@ #include "am33xx.dtsi" #include "am335x-bone-common.dtsi" -#include <dt-bindings/display/tda998x.h> +#include "am335x-boneblack-common.dtsi" / { model = "TI AM335x BeagleBone Black"; compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; }; - -&ldo3_reg { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; -}; - -&mmc1 { - vmmc-supply = <&vmmcsd_fixed>; -}; - -&mmc2 { - vmmc-supply = <&vmmcsd_fixed>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_pins>; - bus-width = <8>; - status = "okay"; -}; - -&am33xx_pinmux { - nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ - AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ - AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ - AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ - >; - }; - nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ - >; - }; - - mcasp0_pins: mcasp0_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ - AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ - AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ - AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ - AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ - >; - }; -}; - -&lcdc { - status = "okay"; - port { - lcdc_0: endpoint@0 { - remote-endpoint = <&hdmi_0>; - }; - }; -}; - -&i2c0 { - tda19988: tda19988 { - compatible = "nxp,tda998x"; - reg = <0x70>; - - pinctrl-names = "default", "off"; - pinctrl-0 = <&nxp_hdmi_bonelt_pins>; - pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; - - #sound-dai-cells = <0>; - audio-ports = < TDA998x_I2S 0x03>; - - ports { - port@0 { - hdmi_0: endpoint@0 { - remote-endpoint = <&lcdc_0>; - }; - }; - }; - }; -}; - -&rtc { - system-power-controller; -}; - -&mcasp0 { - #sound-dai-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mcasp0_pins>; - status = "okay"; - op-mode = <0>; /* MCASP_IIS_MODE */ - tdm-slots = <2>; - serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ - 0 0 1 0 - >; - tx-num-evt = <32>; - rx-num-evt = <32>; -}; - -/ { - clk_mcasp0_fixed: clk_mcasp0_fixed { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24576000>; - }; - - clk_mcasp0: clk_mcasp0 { - #clock-cells = <0>; - compatible = "gpio-gate-clock"; - clocks = <&clk_mcasp0_fixed>; - enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */ - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "TI BeagleBone Black"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&dailink0_master>; - simple-audio-card,frame-master = <&dailink0_master>; - - dailink0_master: simple-audio-card,cpu { - sound-dai = <&mcasp0>; - clocks = <&clk_mcasp0>; - }; - - simple-audio-card,codec { - sound-dai = <&tda19988>; - }; - }; -}; diff --git a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi new file mode 100644 index 000000000000..853e6d3a028d --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&am33xx_pinmux { + uart2_pins: uart2_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */ + AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */ + >; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&rtc { + system-power-controller; +}; diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts new file mode 100644 index 000000000000..9d1a0fd555f3 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts @@ -0,0 +1,126 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am335x-bonegreen-common.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "TI AM335x BeagleBone Green Wireless"; + compatible = "ti,am335x-bone-green-wireless", "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; + + wlan_en_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us= <70000>; + + /* WL_EN */ + gpio = <&gpio0 26 0>; + enable-active-high; + }; +}; + +&am33xx_pinmux { + bt_pins: pinmux_bt_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x878, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad12.gpio1_28 BT_EN */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */ + AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */ + AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */ + AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */ + AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ + AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* gmii1_rxd3.uart3_rxd */ + AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gmii1_rxd2.uart3_txd */ + AM33XX_IOPAD(0x948, PIN_INPUT | MUX_MODE3) /* mdio_data.uart3_ctsn */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* mdio_clk.uart3_rtsn */ + >; + }; + + wl18xx_pins: pinmux_wl18xx_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x828, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN */ + AM33XX_IOPAD(0x82C, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ */ + AM33XX_IOPAD(0x87C, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 LS_BUF_EN */ + >; + }; +}; + +&mac { + status = "disabled"; +}; + +&mmc3 { + dmas = <&edma_xbar 12 0 1 + &edma_xbar 13 0 2>; + dma-names = "tx", "rx"; + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + non-removable; + cap-power-off-card; + ti,needs-special-hs-handling; + keep-power-in-suspend; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins &wl18xx_pins>; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins &bt_pins>; + status = "okay"; +}; + +&gpio1 { + ls_buf_en { + gpio-hog; + gpios = <29 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "LS_BUF_EN"; + }; +}; + +/* BT_AUD_OUT from wl1835 has to be pulled low when WL_EN is activated.*/ +/* in case it isn't, wilink8 ends up in one of the test modes that */ +/* intruces various issues (elp wkaeup timeouts etc.) */ +/* On the BBGW this pin is routed through the level shifter (U21) that */ +/* introduces a pullup on the line and wilink8 ends up in a bad state. */ +/* use a gpio hog to force this pin low. An alternative may be adding */ +/* an external pulldown on U21 pin 4. */ + +&gpio3 { + bt_aud_in { + gpio-hog; + gpios = <16 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "MCASP0_AHCLKR"; + }; +}; diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts index dce3c8657e04..a8b4d969ce2a 100644 --- a/arch/arm/boot/dts/am335x-bonegreen.dts +++ b/arch/arm/boot/dts/am335x-bonegreen.dts @@ -9,45 +9,9 @@ #include "am33xx.dtsi" #include "am335x-bone-common.dtsi" +#include "am335x-bonegreen-common.dtsi" / { model = "TI AM335x BeagleBone Green"; compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; }; - -&ldo3_reg { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; -}; - -&mmc1 { - vmmc-supply = <&vmmcsd_fixed>; -}; - -&mmc2 { - vmmc-supply = <&vmmcsd_fixed>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_pins>; - bus-width = <8>; - status = "okay"; -}; - -&am33xx_pinmux { - uart2_pins: uart2_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */ - AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */ - >; - }; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; - status = "okay"; -}; - -&rtc { - system-power-controller; -}; diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts index 2a624b3c9258..d8769799772e 100644 --- a/arch/arm/boot/dts/am335x-chiliboard.dts +++ b/arch/arm/boot/dts/am335x-chiliboard.dts @@ -185,3 +185,19 @@ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; status = "okay"; }; + +&tps { + interrupt-parent = <&intc>; + interrupts = <7>; /* NNMI */ + + charger { + interrupts = <0>, <1>; + interrupt-names = "USB", "AC"; + status = "okay"; + }; + + pwrbutton { + interrupts = <2>; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi index f9ee5859c154..1b43ebd08b38 100644 --- a/arch/arm/boot/dts/am335x-chilisom.dtsi +++ b/arch/arm/boot/dts/am335x-chilisom.dtsi @@ -124,6 +124,14 @@ &rtc { system-power-controller; + + pinctrl-0 = <&ext_wakeup>; + pinctrl-names = "default"; + + ext_wakeup: ext-wakeup { + pins = "ext_wakeup0"; + input-enable; + }; }; /* NAND Flash */ diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index e82432c79f85..1c37a7c1ea17 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -25,6 +25,10 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; + chosen { + stdout-path = &uart0; + }; + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; @@ -783,3 +787,8 @@ pinctrl-names = "default"; pinctrl-0 = <&dcan1_pins_default>; }; + +&rtc { + clocks = <&clk_32768_ck>, <&clkdiv32k_ick>; + clock-names = "ext-clk", "int-clk"; +}; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 975c36e332a2..9e43c443738a 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -32,6 +32,10 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; + chosen { + stdout-path = &uart0; + }; + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; @@ -715,3 +719,8 @@ blue-and-red-wiring = "crossed"; }; + +&rtc { + clocks = <&clk_32768_ck>, <&clkdiv32k_ick>; + clock-names = "ext-clk", "int-clk"; +}; diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index 85e04c205542..a2ad076822db 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -24,6 +24,10 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; + chosen { + stdout-path = &uart3; + }; + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; @@ -43,52 +47,52 @@ enable-active-high; }; - leds0 { + leds-iio { + status = "disabled"; compatible = "gpio-leds"; - - led0 { + led-out0 { label = "out0"; gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led1 { + led-out1 { label = "out1"; gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led2 { + led-out2 { label = "out2"; gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led3 { + led-out3 { label = "out3"; gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led4 { + led-out4 { label = "out4"; gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led5 { + led-out5 { label = "out5"; gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led6 { + led-out6 { label = "out6"; gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led7 { + led-out7 { label = "out7"; gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>; default-state = "off"; @@ -170,7 +174,6 @@ AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE5) /* (C15) spi0_cs1.mmc0_sdcd */ >; }; @@ -187,6 +190,8 @@ AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */ AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */ AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */ + AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE0) /* (C15) spi0_cs1.spi0_cs1 */ + AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* (B12) mcasp0_aclkr.gpio3[18] */ >; }; @@ -224,6 +229,31 @@ }; }; +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_default>; + + sn65hvs882@1 { + compatible = "pisosr-gpio"; + gpio-controller; + #gpio-cells = <2>; + + load-gpios = <&gpio3 18 GPIO_ACTIVE_LOW>; + + reg = <1>; + spi-max-frequency = <1000000>; + spi-cpol; + }; +}; + +&tscadc { + status = "okay"; + adc { + ti,adc-channels = <1 2 3 4 5 6 7>; + }; +}; + #include "tps65910.dtsi" &tps { diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts index 483d585c8908..807494bc722b 100644 --- a/arch/arm/boot/dts/am335x-nano.dts +++ b/arch/arm/boot/dts/am335x-nano.dts @@ -249,7 +249,8 @@ #address-cells = <2>; #size-cells = <1>; - ranges = <0 0 0x08000000 0x08000000>; /* CS0: NOR 128M */ + ranges = <0 0 0x08000000 0x08000000>, /* CS0: NOR 128M */ + <1 0 0x1c000000 0x01000000>; /* CS1: FRAM 16M */ nor@0,0 { reg = <0 0x00000000 0x08000000>; @@ -342,6 +343,34 @@ reg = <0x04000000 0x04000000>; /* 64MB */ }; }; + + fram@1,0 { + reg = <1 0x00000000 0x01000000>; + bank-width = <2>; + + gpmc,mux-add-data = <2>; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <160>; + gpmc,cs-wr-off-ns = <160>; + gpmc,adv-on-ns = <10>; + gpmc,adv-rd-off-ns = <20>; + gpmc,adv-wr-off-ns = <20>; + gpmc,oe-on-ns = <30>; + gpmc,oe-off-ns = <150>; + gpmc,we-on-ns = <30>; + gpmc,we-off-ns = <150>; + gpmc,rd-cycle-ns = <160>; + gpmc,wr-cycle-ns = <160>; + gpmc,access-ns = <130>; + gpmc,page-burst-access-ns = <10>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; + gpmc,cycle2cycle-delay-ns = <10>; + gpmc,wr-data-mux-bus-ns = <30>; + gpmc,wr-access-ns = <0>; + }; }; &mac { diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi new file mode 100644 index 000000000000..02981eae96b9 --- /dev/null +++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi @@ -0,0 +1,288 @@ +/* + * Copyright (C) 2014-2017 Phytec Messtechnik GmbH + * Author: Wadim Egorov <w.egorov@phytec.de> + * Teresa Remmet <t.remmet@phytec.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/input/input.h> + +/ { + model = "Phytec AM335x PCM-953"; + compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx"; + + /* Power */ + regulators { + vcc3v3: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + vcc1v8: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + }; + + /* User IO */ + user_leds: user_leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_pins>; + + green { + label = "green:user"; + gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "on"; + }; + + yellow { + label = "yellow:user"; + gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; + linux,default-trigger = "gpio"; + default-state = "on"; + }; + }; + + user_buttons: user_buttons { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&user_buttons_pins>; + + button@0 { + label = "home"; + linux,code = <KEY_HOME>; + gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; + gpio-key,wakeup; + }; + + button@1 { + label = "menu"; + linux,code = <KEY_MENU>; + gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; + gpio-key,wakeup; + }; + + }; +}; + +&am33xx_pinmux { + user_buttons_pins: pinmux_user_buttons { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* emu0.gpio3_7 */ + AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* emu1.gpio3_8 */ + >; + }; + + user_leds_pins: pinmux_user_leds { + pinctrl-single,pins = < + AM33XX_IOPAD(0x880, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */ + AM33XX_IOPAD(0x884, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */ + >; + }; +}; + +/* CAN */ +&am33xx_pinmux { + dcan1_pins: pinmux_dcan1 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x980, PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart1_rxd.dcan1_tx_mux2 */ + AM33XX_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.dcan1_rx_mux2 */ + >; + }; +}; + +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; + status = "okay"; +}; + +/* Ethernet */ +&am33xx_pinmux { + ethernet1_pins: pinmux_ethernet1 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ + AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + >; + }; +}; + +&cpsw_emac1 { + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + dual_emac_res_vlan = <2>; + status = "okay"; +}; + +&davinci_mdio { + phy1: ethernet-phy@2 { + reg = <2>; + + /* Register 260 (104h) – RGMII Clock and Control Pad Skew */ + rxc-skew-ps = <1400>; + rxdv-skew-ps = <0>; + txc-skew-ps = <1400>; + txen-skew-ps = <0>; + /* Register 261 (105h) – RGMII RX Data Pad Skew */ + rxd3-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd0-skew-ps = <0>; + /* Register 262 (106h) – RGMII TX Data Pad Skew */ + txd3-skew-ps = <0>; + txd2-skew-ps = <0>; + txd1-skew-ps = <0>; + txd0-skew-ps = <0>; + }; +}; + +&mac { + slaves = <2>; + pinctrl-names = "default"; + pinctrl-0 = <ðernet0_pins ðernet1_pins>; + dual_emac; +}; + +/* Misc */ +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&cb_gpio_pins>; + + cb_gpio_pins: pinmux_cb_gpio { + pinctrl-single,pins = < + AM33XX_IOPAD(0x968, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart0_ctsn.gpio1_8 */ + AM33XX_IOPAD(0x96c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart0_rtsn.gpio1_9 */ + >; + }; +}; + +/* MMC */ +&am33xx_pinmux { + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE7) /* spi0_cs1.mmc0_sdcd */ + >; + }; +}; + +&mmc1 { + vmmc-supply = <&vcc3v3>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +/* UARTs */ +&am33xx_pinmux { + uart0_pins: pinmux_uart0 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + uart1_pins: pinmux_uart1 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ + AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ + AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ + >; + }; + + uart2_pins: pinmux_uart2 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_tx_clk.uart2_rxd */ + AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_rx_clk.uart2_txd */ + >; + }; + + uart3_pins: pinmux_uart3 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd3.uart3_rxd */ + AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd2.uart3_txd */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "okay"; +}; + +/* USB */ +&cppi41dma { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&usb1_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-phycore-rdk.dts b/arch/arm/boot/dts/am335x-phycore-rdk.dts new file mode 100644 index 000000000000..305f0b35d6ea --- /dev/null +++ b/arch/arm/boot/dts/am335x-phycore-rdk.dts @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2014 PHYTEC Messtechnik GmbH + * Author: Wadim Egorov <w.egorov@phytec.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "am335x-phycore-som.dtsi" +#include "am335x-pcm-953.dtsi" + +/* SoM */ +&i2c_eeprom { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +&serial_flash { + status = "okay"; + +}; diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index 75e24add3f13..14533ff6d0ad 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -78,7 +78,7 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <&phy0>; phy-mode = "rmii"; dual_emac_res_vlan = <1>; }; @@ -87,6 +87,10 @@ pinctrl-names = "default"; pinctrl-0 = <&mdio_pins>; status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; }; &mac { @@ -120,6 +124,12 @@ reg = <0x2d>; }; + i2c_tmp102: temp@4b { + compatible = "ti,tmp102"; + reg = <0x4b>; + status = "disabled"; + }; + i2c_eeprom: eeprom@52 { compatible = "atmel,24c32"; pagesize = <32>; @@ -201,43 +211,6 @@ #address-cells = <1>; #size-cells = <1>; - - partition@0 { - label = "xload"; - reg = <0x0 0x20000>; - }; - partition@1 { - label = "xload_backup1"; - reg = <0x20000 0x20000>; - }; - partition@2 { - label = "xload_backup2"; - reg = <0x40000 0x20000>; - }; - partition@3 { - label = "xload_backup3"; - reg = <0x60000 0x20000>; - }; - partition@4 { - label = "barebox"; - reg = <0x80000 0x80000>; - }; - partition@5 { - label = "bareboxenv"; - reg = <0x100000 0x40000>; - }; - partition@6 { - label = "oftree"; - reg = <0x140000 0x40000>; - }; - partition@7 { - label = "kernel"; - reg = <0x180000 0x800000>; - }; - partition@8 { - label = "root"; - reg = <0x980000 0x0>; - }; }; }; @@ -341,33 +314,12 @@ status = "okay"; serial_flash: m25p80@0 { - compatible = "m25p80"; + compatible = "jedec,spi-nor"; spi-max-frequency = <48000000>; reg = <0x0>; m25p,fast-read; status = "disabled"; #address-cells = <1>; #size-cells = <1>; - - partition@0 { - label = "xload"; - reg = <0x0 0x20000>; - }; - partition@1 { - label = "barebox"; - reg = <0x20000 0x80000>; - }; - partition@2 { - label = "bareboxenv"; - reg = <0xa0000 0x20000>; - }; - partition@3 { - label = "oftree"; - reg = <0xc0000 0x20000>; - }; - partition@4 { - label = "kernel"; - reg = <0xe0000 0x0>; - }; }; }; diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index b0dfa6f14cd5..c5d2589c55fc 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -136,6 +136,13 @@ >; }; + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ + AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + >; + }; + uart4_pins: pinmux_uart4_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* gpmc_wait0.uart4_rxd */ @@ -150,13 +157,6 @@ >; }; - i2c1_pins: pinmux_i2c1_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rxd.i2c1_sda */ - AM33XX_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_txdi2c1_scl */ - >; - }; - i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ @@ -262,6 +262,16 @@ >; }; + spi0_pins: pinmux_spi0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_MOSI - spi0_d0.spi0_d0 */ + AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_MISO - spi0_d1.spi0_d1 */ + AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_CLK - spi0_clk.spi0_clk */ + AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_CS0 (NBATTSS) - spi0_cs0.spi0_cs0 */ + AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_CS1 (FPGA_FLASH_NCS) - spi0_cs1.spi0_cs1 */ + >; + }; + lwb_pins: pinmux_lwb_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7) /* SoundPA_en - mcasp0_fsr.gpio3_19 */ @@ -292,16 +302,22 @@ reg = <0x24>; }; + bq32000: rtc@68 { + compatible = "ti,bq32000"; + trickle-resistor-ohms = <1120>; + reg = <0x68>; + }; + eeprom: eeprom@50 { compatible = "at,24c256"; reg = <0x50>; }; -}; -&i2c1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; + gpio_exp: mcp23017@20 { + compatible = "microchip,mcp23017"; + reg = <0x20>; + }; + }; &i2c2 { @@ -321,6 +337,16 @@ DRVDD-supply = <&ldo4_reg>; DVDD-supply = <&ldo3_reg>; }; + + /* Ambient Light Sensor */ + als: isl29023@44 { + compatible = "isil,isl29023"; + reg = <0x44>; + }; +}; + +&rtc { + status = "disabled"; }; &usb { @@ -394,12 +420,32 @@ pinctrl-0 = <&uart0_pins>; }; +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + &uart4 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart4_pins>; }; +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + + flash: n25q032@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q032"; + reg = <1>; + spi-max-frequency = <5000000>; + }; +}; + #include "tps65217.dtsi" &tps { diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi index 02c67365c4e1..8ce541739b24 100644 --- a/arch/arm/boot/dts/am335x-wega.dtsi +++ b/arch/arm/boot/dts/am335x-wega.dtsi @@ -119,11 +119,17 @@ }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <&phy1>; phy-mode = "mii"; dual_emac_res_vlan = <2>; }; +&davinci_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mac { slaves = <2>; pinctrl-names = "default"; @@ -206,7 +212,6 @@ }; &usb0 { - dr_mode = "peripheral"; status = "okay"; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 194d884c9de1..9e96d60976b7 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -16,6 +16,7 @@ interrupt-parent = <&intc>; #address-cells = <1>; #size-cells = <1>; + chosen { }; aliases { i2c0 = &i2c0; @@ -130,6 +131,7 @@ reg = <0x210000 0x2000>; #address-cells = <1>; #size-cells = <1>; + #pinctrl-cells = <1>; ranges = <0 0x210000 0x2000>; am33xx_pinmux: pinmux@800 { @@ -137,15 +139,17 @@ reg = <0x800 0x238>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x7f>; }; scm_conf: scm_conf@0 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x0 0x800>; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0 0x800>; scm_clocks: clocks { #address-cells = <1>; @@ -505,6 +509,8 @@ interrupts = <75 76>; ti,hwmods = "rtc"; + clocks = <&clkdiv32k_ick>; + clock-names = "int-clk"; }; spi0: spi@48030000 { @@ -777,7 +783,6 @@ cpdma_channels = <8>; ale_entries = <1024>; bd_ram_size = <0x2000>; - no_bd_ram = <0>; mac_control = <0x20>; slaves = <2>; active_slave = <0>; @@ -855,6 +860,8 @@ interrupts = <16>; ti,hwmods = "adc_tsc"; status = "disabled"; + dmas = <&edma 53 0>, <&edma 57 0>; + dma-names = "fifo0", "fifo1"; tsc { compatible = "ti,am3359-tsc"; diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index 0db19d39d24c..9fe545dbfa89 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -66,6 +66,7 @@ reg = <0x480025d8 0x24>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <16>; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index a275fa956813..97fcaf415de1 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -16,6 +16,7 @@ interrupt-parent = <&wakeupgen>; #address-cells = <1>; #size-cells = <1>; + chosen { }; memory@0 { device_type = "memory"; @@ -189,6 +190,7 @@ reg = <0x800 0x31c>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <32>; @@ -668,7 +670,6 @@ cpdma_channels = <8>; ale_entries = <1024>; bd_ram_size = <0x2000>; - no_bd_ram = <0>; mac_control = <0x20>; slaves = <2>; active_slave = <0>; @@ -871,6 +872,8 @@ clocks = <&adc_tsc_fck>; clock-names = "fck"; status = "disabled"; + dmas = <&edma 53 0>, <&edma 57 0>; + dma-names = "fifo0", "fifo1"; tsc { compatible = "ti,am3359-tsc"; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 957840cc7b78..a4f31739057f 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -23,6 +23,10 @@ display0 = &lcd0; }; + chosen { + stdout-path = &uart0; + }; + evm_v3_3d: fixedregulator-v3_3d { compatible = "regulator-fixed"; regulator-name = "evm_v3_3d"; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index 25ce611c6568..c1f7f9336e64 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -18,6 +18,10 @@ model = "TI AM437x Industrial Development Kit"; compatible = "ti,am437x-idk-evm","ti,am4372","ti,am43"; + chosen { + stdout-path = &uart0; + }; + v24_0d: fixed-regulator-v24_0d { compatible = "regulator-fixed"; regulator-name = "V24_0D"; @@ -117,6 +121,58 @@ compatible = "fixed-clock"; clock-frequency = <32768>; }; + + leds-iio { + status = "disabled"; + compatible = "gpio-leds"; + led-out0 { + label = "out0"; + gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out1 { + label = "out1"; + gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out2 { + label = "out2"; + gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out3 { + label = "out3"; + gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out4 { + label = "out4"; + gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out5 { + label = "out5"; + gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out6 { + label = "out6"; + gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out7 { + label = "out7"; + gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; }; &am43xx_pinmux { @@ -178,6 +234,24 @@ >; }; + spi1_pins_default: spi1_pins_default { + pinctrl-single,pins = < + AM4372_IOPAD(0x908, PIN_INPUT | MUX_MODE2) /* mii1_col.spi1_sclk */ + AM4372_IOPAD(0x910, PIN_INPUT | MUX_MODE2) /* mii1_rx_er.spi1_d1 */ + AM4372_IOPAD(0x944, PIN_OUTPUT | MUX_MODE2) /* rmii1_ref_clk.spi1_cs0 */ + AM4372_IOPAD(0x90c, PIN_OUTPUT | MUX_MODE7) /* mii1_crs.gpio3_1 */ + >; + }; + + spi1_pins_sleep: spi1_pins_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + ecap0_pins_default: backlight_pins_default { pinctrl-single,pins = < AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */ @@ -290,6 +364,33 @@ pinctrl-0 = <&i2c2_pins_default>; pinctrl-1 = <&i2c2_pins_sleep>; clock-frequency = <100000>; + + tpic2810: tpic2810@60 { + compatible = "ti,tpic2810"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi1_pins_default>; + pinctrl-1 = <&spi1_pins_sleep>; + ti,pindir-d0-out-d1-in; + + sn65hvs882: sn65hvs882@0 { + compatible = "pisosr-gpio"; + gpio-controller; + #gpio-cells = <2>; + + load-gpios = <&gpio3 1 GPIO_ACTIVE_LOW>; + + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpol; + }; }; &epwmss0 { @@ -310,6 +411,10 @@ status = "okay"; }; +&gpio3 { + status = "okay"; +}; + &gpio4 { status = "okay"; }; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 319d94205350..4dc54bee2f36 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -24,6 +24,10 @@ display0 = &lcd0; }; + chosen { + stdout-path = &uart0; + }; + /* fixed 32k external oscillator clock */ clk_32k_rtc: clk_32k_rtc { #clock-cells = <0>; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 9d35c3f07cad..9acd4ccdec4e 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -24,6 +24,10 @@ display0 = &lcd0; }; + chosen { + stdout-path = &uart0; + }; + vmmcsd_fixed: fixedregulator-sd { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts new file mode 100644 index 000000000000..ad68d1eb3bc3 --- /dev/null +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -0,0 +1,81 @@ +/* + * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "dra72x.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "am57xx-idk-common.dtsi" + +/ { + model = "TI AM5718 IDK"; + compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7"; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x40000000>; + }; + + leds { + compatible = "gpio-leds"; + cpu0-led { + label = "status0:red:cpu0"; + gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "cpu0"; + }; + + usr0-led { + label = "status0:green:usr"; + gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + heartbeat-led { + label = "status0:blue:heartbeat"; + gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + + usr1-led { + label = "status1:red:usr"; + gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + usr2-led { + label = "status1:green:usr"; + gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + mmc0-led { + label = "status1:blue:mmc0"; + gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc0"; + }; + }; +}; + +&mmc1 { + status = "okay"; + vmmc-supply = <&ldo1_reg>; + bus-width = <4>; + cd-gpios = <&gpio6 27 0>; /* gpio 219 */ +}; + +&omap_dwc3_2 { + extcon = <&extcon_usb2>; +}; + +&extcon_usb2 { + id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; + vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index 87bbc66f0f21..8350b4b34b08 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -23,11 +23,6 @@ reg = <0x0 0x80000000 0x0 0x80000000>; }; - extcon_usb2: extcon_usb2 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; - }; - status-leds { compatible = "gpio-leds"; cpu0-led { @@ -76,6 +71,11 @@ extcon = <&extcon_usb2>; }; +&extcon_usb2 { + id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; + vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>; +}; + &mmc1 { status = "okay"; vmmc-supply = <&v3_3d>; @@ -83,3 +83,11 @@ bus-width = <4>; cd-gpios = <&gpio6 27 0>; /* gpio 219 */ }; + +&sn65hvs882 { + load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; +}; + +&pcie1 { + gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index 6df7829a2c15..585d792a8fdd 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -22,6 +22,10 @@ display0 = &hdmi0; }; + chosen { + stdout-path = &uart3; + }; + memory@0 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x80000000>; @@ -204,6 +208,7 @@ interrupt-controller; ti,system-power-controller; + ti,palmas-override-powerhold; tps659038_pmic { compatible = "ti,tps659038-pmic"; @@ -420,19 +425,29 @@ <&dra7_pmx_core 0x3f8>; }; +&davinci_mdio { + phy0: ethernet-phy@1 { + reg = <1>; + }; + + phy1: ethernet-phy@2 { + reg = <2>; + }; +}; + &mac { status = "okay"; dual_emac; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <&phy0>; phy-mode = "rgmii"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <2>; + phy-handle = <&phy1>; phy-mode = "rgmii"; dual_emac_res_vlan = <2>; }; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts index ca85570629fd..39a92aff0a0d 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts @@ -22,3 +22,8 @@ vmmc-supply = <&vdd_3v3>; vmmc-aux-supply = <&ldo1_reg>; }; + +/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */ +&phy1 { + max-speed = <100>; +}; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 8c66f2efd283..19a60a11c198 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -22,3 +22,8 @@ &mmc1 { vmmc-supply = <&ldo1_reg>; }; + +/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */ +&phy1 { + max-speed = <100>; +}; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 03cec62260e1..0d341c545b01 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -14,6 +14,10 @@ rtc1 = &rtc; }; + chosen { + stdout-path = &uart3; + }; + vmain: fixedregulator-vmain { compatible = "regulator-fixed"; regulator-name = "VMAIN"; @@ -43,6 +47,58 @@ regulator-always-on; regulator-boot-on; }; + + leds-iio { + status = "disabled"; + compatible = "gpio-leds"; + led-out0 { + label = "out0"; + gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out1 { + label = "out1"; + gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out2 { + label = "out2"; + gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out3 { + label = "out3"; + gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out4 { + label = "out4"; + gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out5 { + label = "out5"; + gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out6 { + label = "out6"; + gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out7 { + label = "out7"; + gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; }; &i2c1 { @@ -57,6 +113,7 @@ #interrupt-cells = <2>; interrupt-controller; ti,system-power-controller; + ti,palmas-override-powerhold; tps659038_pmic { compatible = "ti,tps659038-pmic"; @@ -250,6 +307,35 @@ gpio-controller; #gpio-cells = <2>; }; + + extcon_usb2: tps659038_usb { + compatible = "ti,palmas-usb-vid"; + ti,enable-vbus-detection; + ti,enable-id-detection; + /* ID & VBUS GPIOs provided in board dts */ + }; + }; +}; + +&mcspi3 { + status = "okay"; + ti,pindir-d0-out-d1-in; + + sn65hvs882: sn65hvs882@0 { + compatible = "pisosr-gpio"; + gpio-controller; + #gpio-cells = <2>; + + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpol; + }; + + tpic2810: tpic2810@60 { + compatible = "ti,tpic2810"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; }; }; @@ -294,7 +380,7 @@ }; &usb2 { - dr_mode = "otg"; + dr_mode = "peripheral"; }; &mmc2 { diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 033fa63544f7..c4eef7323367 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -18,17 +18,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -37,11 +37,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -67,7 +67,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x40000000>; /* 1 GB */ }; @@ -86,18 +86,6 @@ status = "okay"; }; - mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - ethernet@70000 { pinctrl-0 = <&ge0_rgmii_pins>; pinctrl-names = "default"; @@ -182,24 +170,6 @@ }; }; }; - - pcie-controller { - status = "okay"; - /* - * The two PCIe units are accessible through - * both standard PCIe slots and mini-PCIe - * slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; }; sound { @@ -261,6 +231,37 @@ }; }; +&pciec { + status = "okay"; + /* + * The two PCIe units are accessible through + * both standard PCIe slots and mini-PCIe + * slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; +}; + +&mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + + &spi0 { pinctrl-0 = <&spi0_pins2>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts index e2a363b1dd8a..db7f3aa38670 100644 --- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts +++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -62,7 +62,7 @@ stdout-path = &uart0; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x20000000>; /* 512 MiB */ }; @@ -72,20 +72,6 @@ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; - pcie-controller { - status = "okay"; - - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; - internal-regs { sata@a0000 { nr-ports = <2>; @@ -262,6 +248,20 @@ }; }; +&pciec { + status = "okay"; + + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; +}; + &pinctrl { sata_l_white_pin: sata-l-white-pin { marvell,pins = "mpp57"; diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index d5e19cd4d256..702f58c9642d 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -54,7 +54,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x20000000>; /* 512 MB */ }; @@ -64,22 +64,6 @@ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; - pcie-controller { - status = "okay"; - - /* Internal mini-PCIe connector */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* Connected on the PCB to a USB 3.0 XHCI controller */ - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; - internal-regs { serial@12000 { status = "okay"; @@ -113,17 +97,6 @@ }; }; - mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; ethernet@70000 { pinctrl-0 = <&ge0_rgmii_pins>; pinctrl-names = "default"; @@ -197,6 +170,34 @@ }; }; +&pciec { + status = "okay"; + + /* Internal mini-PCIe connector */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Connected on the PCB to a USB 3.0 XHCI controller */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; +}; + +&mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &pinctrl { pwr_led_pin: pwr-led-pin { marvell,pins = "mpp63"; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index 39181b3fa90d..b1a96e95e921 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -56,7 +56,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x20000000>; /* 512 MB */ }; @@ -66,22 +66,6 @@ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; - pcie-controller { - status = "okay"; - - /* Connected to Marvell 88SE9170 SATA controller */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* Connected to FL1009 USB 3.0 controller */ - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; - internal-regs { /* RTC is provided by Intersil ISL12057 I2C RTC chip */ @@ -99,14 +83,6 @@ status = "okay"; }; - mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - phy0: ethernet-phy@0 { /* Marvell 88E1318 */ - reg = <0>; - }; - }; - ethernet@74000 { pinctrl-0 = <&ge1_rgmii_pins>; pinctrl-names = "default"; @@ -120,8 +96,11 @@ }; i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; clock-frequency = <100000>; + + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; isl12057: isl12057@68 { @@ -257,6 +236,30 @@ }; }; +&pciec { + status = "okay"; + + /* Connected to Marvell 88SE9170 SATA controller */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Connected to FL1009 USB 3.0 controller */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; +}; + +&mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + phy0: ethernet-phy@0 { /* Marvell 88E1318 */ + reg = <0>; + }; +}; + &pinctrl { power_led_pin: power-led-pin { marvell,pins = "mpp57"; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index 11565752b9f6..d67e7aa42b54 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -56,7 +56,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x20000000>; /* 512 MB */ }; @@ -66,22 +66,6 @@ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; - pcie-controller { - status = "okay"; - - /* Connected to FL1009 USB 3.0 controller */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* Connected to Marvell 88SE9215 SATA controller */ - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; - internal-regs { /* RTC is provided by Intersil ISL12057 I2C RTC chip */ @@ -93,18 +77,6 @@ status = "okay"; }; - mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - phy0: ethernet-phy@0 { /* Marvell 88E1318 */ - reg = <0>; - }; - - phy1: ethernet-phy@1 { /* Marvell 88E1318 */ - reg = <1>; - }; - }; - ethernet@70000 { pinctrl-0 = <&ge0_rgmii_pins>; pinctrl-names = "default"; @@ -126,8 +98,11 @@ }; i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; clock-frequency = <100000>; + + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; isl12057: isl12057@68 { @@ -279,6 +254,34 @@ }; }; +&pciec { + status = "okay"; + + /* Connected to FL1009 USB 3.0 controller */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Connected to Marvell 88SE9215 SATA controller */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; +}; + +&mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + phy0: ethernet-phy@0 { /* Marvell 88E1318 */ + reg = <0>; + }; + + phy1: ethernet-phy@1 { /* Marvell 88E1318 */ + reg = <1>; + }; +}; + &pinctrl { poweroff: poweroff { marvell,pins = "mpp60"; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index fbef730e8d37..8b2fa9a49967 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -16,17 +16,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -35,11 +35,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -67,7 +67,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x20000000>; /* 512 MB */ }; @@ -77,22 +77,6 @@ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; - pcie-controller { - status = "okay"; - - /* Internal mini-PCIe connector */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* Internal mini-PCIe connector */ - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; - internal-regs { serial@12000 { status = "okay"; @@ -102,14 +86,6 @@ status = "okay"; }; - mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - phy0: ethernet-phy@0 { - reg = <0>; - }; - }; - ethernet@70000 { status = "okay"; phy = <&phy0>; @@ -146,7 +122,7 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; - button@1 { + button { label = "Software Button"; linux,code = <KEY_POWER>; gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; @@ -196,7 +172,9 @@ }; }; - dsa@0 { + dsa { + status = "disabled"; + compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; @@ -235,7 +213,74 @@ }; }; }; - }; +}; + +&pciec { + status = "okay"; + + /* Internal mini-PCIe connector */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Internal mini-PCIe connector */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; +}; + +&mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + + switch: switch@10 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan0"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð1>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + &pinctrl { fan_pins: fan-pins { diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts index ae2e1fe50ef6..eb6af53b4954 100644 --- a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts +++ b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts @@ -28,20 +28,7 @@ compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp"; soc { - pcie-controller { - /* SATA AHCI controller 88SE9170 */ - pcie@1,0 { - status = "okay"; - }; - }; - internal-regs { - mdio { - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - ethernet@74000 { status = "okay"; pinctrl-0 = <&ge1_rgmii_pins>; @@ -131,3 +118,17 @@ 1300 0>; }; }; + +&pciec { + /* SATA AHCI controller 88SE9170 */ + pcie@1,0 { + status = "okay"; + }; +}; + +&mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi index 3036e25c5992..e9a5b952afc0 100644 --- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi +++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi @@ -23,7 +23,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x20000000>; /* 512 MB */ }; @@ -32,15 +32,6 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; - pcie-controller { - status = "okay"; - - /* USB 3.0 bridge ASM1042A */ - pcie@2,0 { - status = "okay"; - }; - }; - internal-regs { serial@12000 { status = "okay"; @@ -51,15 +42,6 @@ status = "okay"; }; - mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - phy0: ethernet-phy@0 { - reg = <0>; - }; - }; - ethernet@70000 { status = "okay"; pinctrl-0 = <&ge0_rgmii_pins>; @@ -159,19 +141,19 @@ #address-cells = <1>; #size-cells = <0>; - button@1 { + power { label = "Power button"; linux,code = <KEY_POWER>; gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; debounce-interval = <100>; }; - button@2 { + backup { label = "Backup button"; linux,code = <KEY_OPTION>; gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; debounce-interval = <100>; }; - button@3 { + reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; @@ -208,6 +190,25 @@ }; }; +&pciec { + status = "okay"; + + /* USB 3.0 bridge ASM1042A */ + pcie@2,0 { + status = "okay"; + }; +}; + + +&mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + &pinctrl { pinctrl-0 = <&hdd0_led_sata_pin>, <&hdd1_led_sata_pin>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi index 01cded310cbc..d079a89ee5a2 100644 --- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi +++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi @@ -24,7 +24,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x20000000>; /* 512 MB */ }; @@ -33,15 +33,6 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; - pcie-controller { - status = "okay"; - - /* USB 3.0 Bridge ASM1042A */ - pcie@1,0 { - status = "okay"; - }; - }; - internal-regs { coherency-fabric@20200 { broken-idle; @@ -51,15 +42,6 @@ status = "okay"; }; - mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - phy0: ethernet-phy@0 { - reg = <0>; - }; - }; - ethernet@74000 { status = "okay"; pinctrl-0 = <&ge1_rgmii_pins>; @@ -107,19 +89,19 @@ #address-cells = <1>; #size-cells = <0>; - button@1 { + power { label = "Power button"; linux,code = <KEY_POWER>; gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; debounce-interval = <100>; }; - button@2 { + reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; debounce-interval = <100>; }; - button@3 { + button { label = "USB VBUS error"; linux,code = <KEY_UNKNOWN>; gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; @@ -143,6 +125,24 @@ }; }; +&pciec { + status = "okay"; + + /* USB 3.0 Bridge ASM1042A */ + pcie@1,0 { + status = "okay"; + }; +}; + +&mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + &pinctrl { pinctrl-0 = <&sata_led_pin>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts index a9cc42776874..4978011df5bd 100644 --- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -70,7 +70,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x20000000>; /* 512 MB */ }; @@ -127,12 +127,6 @@ status = "okay"; }; - mdio { - phy1: ethernet-phy@1 { /* Marvell 88E1512 */ - reg = <1>; - }; - }; - ethernet@70000 { status = "okay"; phy = <&phy1>; @@ -192,7 +186,7 @@ pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin>; pinctrl-names = "default"; - sata1_regulator: sata1-regulator { + sata1_regulator: sata1-regulator@1 { compatible = "regulator-fixed"; reg = <1>; regulator-name = "SATA1 Power"; @@ -205,7 +199,7 @@ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; }; - sata2_regulator: sata2-regulator { + sata2_regulator: sata2-regulator@2 { compatible = "regulator-fixed"; reg = <2>; regulator-name = "SATA2 Power"; @@ -220,6 +214,12 @@ }; }; +&mdio { + phy1: ethernet-phy@1 { /* Marvell 88E1512 */ + reg = <1>; + }; +}; + &pinctrl { disk1_led_pin: disk1-led-pin { marvell,pins = "mpp31"; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 3ccedc9dffb2..09495e87b038 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -18,17 +18,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -37,11 +37,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -50,8 +50,6 @@ * 370 and Armada XP SoC. */ -/include/ "skeleton64.dtsi" - #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { @@ -86,7 +84,7 @@ pcie-mem-aperture = <0xf8000000 0x7e00000>; pcie-io-aperture = <0xffe00000 0x100000>; - devbus-bootcs { + devbus_bootcs: devbus-bootcs { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>; ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>; @@ -96,7 +94,7 @@ status = "disabled"; }; - devbus-cs0 { + devbus_cs0: devbus-cs0 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>; ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>; @@ -106,7 +104,7 @@ status = "disabled"; }; - devbus-cs1 { + devbus_cs1: devbus-cs1 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>; ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>; @@ -116,7 +114,7 @@ status = "disabled"; }; - devbus-cs2 { + devbus_cs2: devbus-cs2 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>; ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>; @@ -126,7 +124,7 @@ status = "disabled"; }; - devbus-cs3 { + devbus_cs3: devbus-cs3 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>; ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>; @@ -142,7 +140,7 @@ #size-cells = <1>; ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; - rtc@10300 { + rtc: rtc@10300 { compatible = "marvell,orion-rtc"; reg = <0x10300 0x20>; interrupts = <50>; @@ -214,33 +212,38 @@ msi-controller; }; - coherency-fabric@20200 { + coherencyfab: coherency-fabric@20200 { compatible = "marvell,coherency-fabric"; reg = <0x20200 0xb0>, <0x21010 0x1c>; }; - timer@20300 { + timer: timer@20300 { reg = <0x20300 0x30>, <0x21040 0x30>; interrupts = <37>, <38>, <39>, <40>, <5>, <6>; }; - watchdog@20300 { + watchdog: watchdog@20300 { reg = <0x20300 0x34>, <0x20704 0x4>; }; - pmsu@22000 { + cpurst: cpurst@20800 { + compatible = "marvell,armada-370-cpu-reset"; + reg = <0x20800 0x8>; + }; + + pmsu: pmsu@22000 { compatible = "marvell,armada-370-pmsu"; reg = <0x22000 0x1000>; }; - usb@50000 { + usb0: usb@50000 { compatible = "marvell,orion-ehci"; reg = <0x50000 0x500>; interrupts = <45>; status = "disabled"; }; - usb@51000 { + usb1: usb@51000 { compatible = "marvell,orion-ehci"; reg = <0x51000 0x500>; interrupts = <46>; @@ -254,7 +257,7 @@ status = "disabled"; }; - mdio: mdio { + mdio: mdio@72004 { #address-cells = <1>; #size-cells = <0>; compatible = "marvell,orion-mdio"; @@ -269,7 +272,7 @@ status = "disabled"; }; - sata@a0000 { + sata: sata@a0000 { compatible = "marvell,armada-370-sata"; reg = <0xa0000 0x5000>; interrupts = <55>; @@ -278,7 +281,7 @@ status = "disabled"; }; - nand@d0000 { + nand: nand@d0000 { compatible = "marvell,armada370-nand"; reg = <0xd0000 0x54>; #address-cells = <1>; @@ -288,7 +291,7 @@ status = "disabled"; }; - mvsdio@d4000 { + sdio: mvsdio@d4000 { compatible = "marvell,orion-sdio"; reg = <0xd4000 0x200>; interrupts = <54>; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index b4258105e91f..cc011c8bc36b 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -17,17 +17,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -50,9 +50,11 @@ */ #include "armada-370-xp.dtsi" -/include/ "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; + model = "Marvell Armada 370 family SoC"; compatible = "marvell,armada370", "marvell,armada-370-xp"; @@ -70,7 +72,7 @@ reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>; }; - pcie-controller { + pciec: pcie-controller@82000000 { compatible = "marvell,armada-370-pcie"; status = "disabled"; device_type = "pci"; @@ -89,7 +91,7 @@ 0x82000000 0x2 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ 0x81000000 0x2 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>; - pcie@1,0 { + pcie0: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -106,7 +108,7 @@ status = "disabled"; }; - pcie@2,0 { + pcie2: pcie@2,0 { device_type = "pci"; assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; reg = <0x1000 0 0 0 0>; @@ -125,7 +127,7 @@ }; internal-regs { - L2: l2-cache { + L2: l2-cache@8000 { compatible = "marvell,aurora-outer-cache"; reg = <0x08000 0x1000>; cache-id-part = <0x100>; @@ -134,14 +136,6 @@ wt-override; }; - i2c0: i2c@11000 { - reg = <0x11000 0x20>; - }; - - i2c1: i2c@11100 { - reg = <0x11100 0x20>; - }; - gpio0: gpio@18100 { compatible = "marvell,orion-gpio"; reg = <0x18100 0x40>; @@ -175,22 +169,8 @@ interrupts = <91>; }; - /* - * Default UART pinctrl setting without RTS/CTS, can - * be overwritten on board level if a different - * configuration is used. - */ - uart0: serial@12000 { - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; - }; - - uart1: serial@12100 { - pinctrl-0 = <&uart1_pins>; - pinctrl-names = "default"; - }; - system-controller@18200 { + systemc: system-controller@18200 { compatible = "marvell,armada-370-xp-system-controller"; reg = <0x18200 0x100>; }; @@ -208,37 +188,18 @@ #clock-cells = <1>; }; - thermal@18300 { + thermal: thermal@18300 { compatible = "marvell,armada370-thermal"; reg = <0x18300 0x4 0x18304 0x4>; status = "okay"; }; - sscg@18330 { + sscg: sscg@18330 { reg = <0x18330 0x4>; }; - interrupt-controller@20a00 { - reg = <0x20a00 0x1d0>, <0x21870 0x58>; - }; - - timer@20300 { - compatible = "marvell,armada-370-timer"; - clocks = <&coreclk 2>; - }; - - watchdog@20300 { - compatible = "marvell,armada-370-wdt"; - clocks = <&coreclk 2>; - }; - - cpurst@20800 { - compatible = "marvell,armada-370-cpu-reset"; - reg = <0x20800 0x8>; - }; - - cpu-config@21000 { + cpuconf: cpu-config@21000 { compatible = "marvell,armada-370-cpu-config"; reg = <0x21000 0x8>; }; @@ -253,15 +214,7 @@ status = "disabled"; }; - usb@50000 { - clocks = <&coreclk 0>; - }; - - usb@51000 { - clocks = <&coreclk 0>; - }; - - xor@60800 { + xor0: xor@60800 { compatible = "marvell,orion-xor"; reg = <0x60800 0x100 0x60A00 0x100>; @@ -280,7 +233,7 @@ }; }; - xor@60900 { + xor1: xor@60900 { compatible = "marvell,orion-xor"; reg = <0x60900 0x100 0x60b00 0x100>; @@ -299,15 +252,7 @@ }; }; - ethernet@70000 { - compatible = "marvell,armada-370-neta"; - }; - - ethernet@74000 { - compatible = "marvell,armada-370-neta"; - }; - - crypto@90000 { + cesa: crypto@90000 { compatible = "marvell,armada-370-crypto"; reg = <0x90000 0x10000>; reg-names = "regs"; @@ -342,6 +287,59 @@ }; }; +/* + * Default UART pinctrl setting without RTS/CTS, can be overwritten on + * board level if a different configuration is used. + */ + +&uart0 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; +}; + +&uart1 { + pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; +}; + +&i2c0 { + reg = <0x11000 0x20>; +}; + +&i2c1 { + reg = <0x11100 0x20>; +}; + +&mpic { + reg = <0x20a00 0x1d0>, <0x21870 0x58>; +}; + +&timer { + compatible = "marvell,armada-370-timer"; + clocks = <&coreclk 2>; +}; + +&watchdog { + compatible = "marvell,armada-370-wdt"; + clocks = <&coreclk 2>; +}; + +&usb0 { + clocks = <&coreclk 0>; +}; + +&usb1 { + clocks = <&coreclk 0>; +}; + +ð0 { + compatible = "marvell,armada-370-neta"; +}; + +ð1 { + compatible = "marvell,armada-370-neta"; +}; + &pinctrl { compatible = "marvell,mv88f6710-pinctrl"; diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index cded5f0a262d..bcdbb8ba1d65 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -17,17 +17,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -58,7 +58,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x40000000>; /* 1 GB */ }; @@ -69,138 +69,141 @@ MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000 MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>; - internal-regs { - spi@10600 { - pinctrl-0 = <&spi0_pins>; - pinctrl-names = "default"; - /* - * SPI conflicts with NAND, so we disable it - * here, and select NAND as the enabled device - * by default. - */ - status = "disabled"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "n25q128a13", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; - }; - }; - - i2c@11000 { - status = "okay"; - clock-frequency = <100000>; - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - }; - - i2c@11100 { - status = "okay"; - clock-frequency = <100000>; - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - }; - - serial@12000 { - status = "okay"; - }; - - pinctrl { - sdio_st_pins: sdio-st-pins { - marvell,pins = "mpp44", "mpp45"; - marvell,function = "gpio"; - }; - }; - - sata@a0000 { - status = "okay"; - nr-ports = <2>; - }; - - nand: nand@d0000 { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - num-cs = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partition@0 { - label = "U-Boot"; - reg = <0 0x800000>; - }; - partition@800000 { - label = "Linux"; - reg = <0x800000 0x800000>; - }; - partition@1000000 { - label = "Filesystem"; - reg = <0x1000000 0x3f000000>; - }; - }; - - usb@54000 { - status = "okay"; - }; - - usb3@58000 { - status = "okay"; - }; - - mvsdio@d4000 { - pinctrl-0 = <&sdio_pins &sdio_st_pins>; - pinctrl-names = "default"; - status = "okay"; - cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; - wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; - }; - - mdio { - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy3: ethernet-phy@3 { - reg = <3>; - }; - }; - - ethernet@f0000 { - status = "okay"; - - eth0@c4000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - - eth1@c5000 { - status = "okay"; - phy = <&phy3>; - phy-mode = "gmii"; - }; - }; - }; - - pcie-controller { - status = "okay"; - /* - * The two PCIe units are accessible through - * standard PCIe slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; }; }; +&pciec { + status = "okay"; +}; + +/* + * The two PCIe units are accessible through + * standard PCIe slots on the board. + */ +&pcie0 { + /* Port 0, Lane 0 */ + status = "okay"; +}; + +&pcie1 { + /* Port 1, Lane 0 */ + status = "okay"; +}; + + +&spi0 { + pinctrl-0 = <&spi0_pins>; + pinctrl-names = "default"; + + /* + * SPI conflicts with NAND, so we disable it here, and + * select NAND as the enabled device by default. + */ + + status = "disabled"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a13", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + }; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <100000>; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <100000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; +}; + +&uart0 { + status = "okay"; +}; + +&pinctrl { + sdio_st_pins: sdio-st-pins { + marvell,pins = "mpp44", "mpp45"; + marvell,function = "gpio"; + }; +}; + +&sata { + status = "okay"; + nr-ports = <2>; +}; + +&nand { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x800000>; + }; + partition@800000 { + label = "Linux"; + reg = <0x800000 0x800000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + +&sdio { + pinctrl-0 = <&sdio_pins &sdio_st_pins>; + pinctrl-names = "default"; + status = "okay"; + cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; +}; + +&mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy3: ethernet-phy@3 { + reg = <3>; + }; +}; + +ðernet { + status = "okay"; +}; + + +ð0 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +ð1 { + status = "okay"; + phy = <&phy3>; + phy-mode = "gmii"; +}; diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index cc952cf8ec30..50c5e8417802 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -16,17 +16,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -35,17 +35,16 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/phy/phy.h> @@ -53,6 +52,9 @@ #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { + #address-cells = <1>; + #size-cells = <1>; + model = "Marvell Armada 375 family SoC"; compatible = "marvell,armada375"; @@ -65,7 +67,7 @@ }; clocks { - /* 2 GHz fixed main PLL */ + /* 1 GHz fixed main PLL */ mainpll: mainpll { compatible = "fixed-clock"; #clock-cells = <0>; @@ -84,12 +86,12 @@ #size-cells = <0>; enable-method = "marvell,armada-375-smp"; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; @@ -115,7 +117,7 @@ reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>; }; - devbus-bootcs { + devbus_bootcs: devbus-bootcs { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>; ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>; @@ -125,7 +127,7 @@ status = "disabled"; }; - devbus-cs0 { + devbus_cs0: devbus-cs0 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>; ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>; @@ -135,7 +137,7 @@ status = "disabled"; }; - devbus-cs1 { + devbus_cs1: devbus-cs1 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>; ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>; @@ -145,7 +147,7 @@ status = "disabled"; }; - devbus-cs2 { + devbus_cs2: devbus-cs2 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>; ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>; @@ -155,7 +157,7 @@ status = "disabled"; }; - devbus-cs3 { + devbus_cs3: devbus-cs3 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>; ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>; @@ -182,12 +184,12 @@ prefetch-data = <1>; }; - scu@c000 { + scu: scu@c000 { compatible = "arm,cortex-a9-scu"; reg = <0xc000 0x58>; }; - timer@c600 { + timer0: timer@c600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xc600 0x20>; interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>; @@ -203,7 +205,7 @@ <0xc100 0x100>; }; - mdio { + mdio: mdio@c0054 { #address-cells = <1>; #size-cells = <0>; compatible = "marvell,orion-mdio"; @@ -212,7 +214,7 @@ }; /* Network controller */ - ethernet@f0000 { + ethernet: ethernet@f0000 { compatible = "marvell,armada-375-pp2"; reg = <0xf0000 0xa000>, /* Packet Processor regs */ <0xc0000 0x3060>, /* LMS regs */ @@ -222,20 +224,20 @@ clock-names = "pp_clk", "gop_clk"; status = "disabled"; - eth0: eth0@c4000 { + eth0: eth0 { interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; port-id = <0>; status = "disabled"; }; - eth1: eth1@c5000 { + eth1: eth1 { interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; port-id = <1>; status = "disabled"; }; }; - rtc@10300 { + rtc: rtc@10300 { compatible = "marvell,orion-rtc"; reg = <0x10300 0x20>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; @@ -307,7 +309,7 @@ status = "disabled"; }; - pinctrl { + pinctrl: pinctrl@18000 { compatible = "marvell,mv88f6720-pinctrl"; reg = <0x18000 0x24>; @@ -382,7 +384,7 @@ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; }; - system-controller@18200 { + systemc: system-controller@18200 { compatible = "marvell,armada-375-system-controller"; reg = <0x18200 0x100>; }; @@ -415,7 +417,7 @@ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; }; - timer@20300 { + timer1: timer@20300 { compatible = "marvell,armada-375-timer", "marvell,armada-370-timer"; reg = <0x20300 0x30>, <0x21040 0x30>; interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, @@ -428,24 +430,24 @@ clock-names = "nbclk", "fixed"; }; - watchdog@20300 { + watchdog: watchdog@20300 { compatible = "marvell,armada-375-wdt"; reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>; clocks = <&coreclk 0>, <&refclk>; clock-names = "nbclk", "fixed"; }; - cpurst@20800 { + cpurst: cpurst@20800 { compatible = "marvell,armada-370-cpu-reset"; reg = <0x20800 0x10>; }; - coherency-fabric@21010 { + coherencyfab: coherency-fabric@21010 { compatible = "marvell,armada-375-coherency-fabric"; reg = <0x21010 0x1c>; }; - usb@50000 { + usb0: usb@50000 { compatible = "marvell,orion-ehci"; reg = <0x50000 0x500>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; @@ -455,7 +457,7 @@ status = "disabled"; }; - usb@54000 { + usb1: usb@54000 { compatible = "marvell,orion-ehci"; reg = <0x54000 0x500>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; @@ -463,7 +465,7 @@ status = "disabled"; }; - usb3@58000 { + usb2: usb3@58000 { compatible = "marvell,armada-375-xhci"; reg = <0x58000 0x20000>,<0x5b880 0x80>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; @@ -473,7 +475,7 @@ status = "disabled"; }; - xor@60800 { + xor0: xor@60800 { compatible = "marvell,orion-xor"; reg = <0x60800 0x100 0x60A00 0x100>; @@ -493,7 +495,7 @@ }; }; - xor@60900 { + xor1: xor@60900 { compatible = "marvell,orion-xor"; reg = <0x60900 0x100 0x60b00 0x100>; @@ -513,7 +515,7 @@ }; }; - crypto@90000 { + cesa: crypto@90000 { compatible = "marvell,armada-375-crypto"; reg = <0x90000 0x10000>; reg-names = "regs"; @@ -528,7 +530,7 @@ marvell,crypto-sram-size = <0x800>; }; - sata@a0000 { + sata: sata@a0000 { compatible = "marvell,armada-370-sata"; reg = <0xa0000 0x5000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; @@ -537,7 +539,7 @@ status = "disabled"; }; - nand@d0000 { + nand: nand@d0000 { compatible = "marvell,armada370-nand"; reg = <0xd0000 0x54>; #address-cells = <1>; @@ -547,7 +549,7 @@ status = "disabled"; }; - mvsdio@d4000 { + sdio: mvsdio@d4000 { compatible = "marvell,orion-sdio"; reg = <0xd4000 0x200>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; @@ -559,7 +561,7 @@ status = "disabled"; }; - thermal@e8078 { + thermal: thermal@e8078 { compatible = "marvell,armada375-thermal"; reg = <0xe8078 0x4>, <0xe807c 0x8>; status = "okay"; @@ -580,7 +582,7 @@ }; }; - pcie-controller { + pciec: pcie-controller@82000000 { compatible = "marvell,armada-370-pcie"; status = "disabled"; device_type = "pci"; @@ -599,7 +601,7 @@ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO */>; - pcie@1,0 { + pcie0: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -616,7 +618,7 @@ status = "disabled"; }; - pcie@2,0 { + pcie1: pcie@2,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; reg = <0x1000 0 0 0 0>; diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi index 5102d19cc8f4..e392f6036f39 100644 --- a/arch/arm/boot/dts/armada-380.dtsi +++ b/arch/arm/boot/dts/armada-380.dtsi @@ -17,17 +17,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 8f0e508f64ae..df47bf1ea5eb 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -103,8 +103,56 @@ }; }; - mdio { + mdio@72004 { status = "okay"; + + switch@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð2>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; }; sata@a8000 { @@ -261,6 +309,8 @@ }; dsa@0 { + status = "disabled"; + compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts new file mode 100644 index 000000000000..28eede180e4f --- /dev/null +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -0,0 +1,392 @@ +/* + * Device Tree file for the Turris Omnia + * + * Copyright (C) 2016 Uwe Kleine-König <uwe@kleine-koenig.org> + * Copyright (C) 2016 Tomas Hlavacek <tmshlvkc@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * Schematic available at https://www.turris.cz/doc/_media/rtrom01-schema.pdf + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "armada-385.dtsi" + +/ { + model = "Turris Omnia"; + compatible = "cznic,turris-omnia", "marvell,armada385", "marvell,armada380"; + + chosen { + stdout-path = &uart0; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; /* 1024 MB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; + + internal-regs { + + /* USB part of the PCIe2/USB 2.0 port */ + usb@58000 { + status = "okay"; + }; + + sata@a8000 { + status = "okay"; + }; + + sdhci@d8000 { + pinctrl-names = "default"; + pinctrl-0 = <&sdhci_pins>; + status = "okay"; + + bus-width = <8>; + no-1-8-v; + non-removable; + }; + + usb3@f0000 { + status = "okay"; + }; + + usb3@f8000 { + status = "okay"; + }; + }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + + pcie@3,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + }; + }; +}; + +/* Connected to 88E6176 switch, port 6 */ +ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&ge0_rgmii_pins>; + status = "okay"; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +/* Connected to 88E6176 switch, port 5 */ +ð1 { + pinctrl-names = "default"; + pinctrl-0 = <&ge1_rgmii_pins>; + status = "okay"; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +/* WAN port */ +ð2 { + status = "okay"; + phy-mode = "sgmii"; + phy = <&phy1>; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + i2cmux@70 { + compatible = "nxp,pca9547"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + status = "okay"; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + /* STM32F0 command interface at address 0x2a */ + /* leds device (in STM32F0) at address 0x2b */ + + eeprom@54 { + compatible = "at,24c64"; + reg = <0x54>; + + /* The EEPROM contains data for bootloader. + * Contents: + * struct omnia_eeprom { + * u32 magic; (=0x0341a034 in LE) + * u32 ramsize; (in GiB) + * char regdomain[4]; + * u32 crc32; + * }; + */ + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + /* routed to PCIe0/mSATA connector (CN7A) */ + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + /* routed to PCIe1/USB2 connector (CN61A) */ + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + /* routed to PCIe2 connector (CN62A) */ + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + /* routed to SFP+ */ + }; + + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + + /* ATSHA204A at address 0x64 */ + }; + + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + + /* exposed on pin header */ + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + + pcawan: gpio@71 { + /* + * GPIO expander for SFP+ signals and + * and phy irq + */ + compatible = "nxp,pca9538"; + reg = <0x71>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcawan_pins>; + + interrupt-parent = <&gpio1>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; +}; + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + status = "okay"; + + phy1: phy@1 { + status = "okay"; + compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22"; + reg = <1>; + + /* irq is connected to &pcawan pin 7 */ + }; + + /* Switch MV88E6176 at address 0x10 */ + switch@10 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + dsa,member = <0 0>; + + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + ports@0 { + reg = <0>; + label = "lan0"; + }; + + ports@1 { + reg = <1>; + label = "lan1"; + }; + + ports@2 { + reg = <2>; + label = "lan2"; + }; + + ports@3 { + reg = <3>; + label = "lan3"; + }; + + ports@4 { + reg = <4>; + label = "lan4"; + }; + + ports@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð1>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + /* port 6 is connected to eth0 */ + }; + }; +}; + +&pinctrl { + pcawan_pins: pcawan-pins { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + spi0cs0_pins: spi0cs0-pins { + marvell,pins = "mpp25"; + marvell,function = "spi0"; + }; + + spi0cs1_pins: spi0cs1-pins { + marvell,pins = "mpp26"; + marvell,function = "spi0"; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins &spi0cs0_pins>; + status = "okay"; + + spi-nor@0 { + compatible = "spansion,s25fl164k", "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x00100000>; + label = "U-Boot"; + }; + + partition@100000 { + reg = <0x00100000 0x00700000>; + label = "Rescue system"; + }; + }; + }; + + /* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */ +}; + +&uart0 { + /* Pin header CN10 */ + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart1 { + /* Pin header CN11 */ + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi index 8e67d2c083dd..8e63be33472e 100644 --- a/arch/arm/boot/dts/armada-385.dtsi +++ b/arch/arm/boot/dts/armada-385.dtsi @@ -17,17 +17,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-388-clearfog-base.dts b/arch/arm/boot/dts/armada-388-clearfog-base.dts new file mode 100644 index 000000000000..22ed07fc2979 --- /dev/null +++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts @@ -0,0 +1,109 @@ +/* + * Device Tree file for SolidRun Clearfog Base revision A1 rev 2.0 (88F6828) + * + * Copyright (C) 2015 Russell King + * + * This board is in development; the contents of this file work with + * the A1 rev 2.0 of the board, which does not represent final + * production board. Things will change, don't expect this file to + * remain compatible info the future. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "armada-388-clearfog.dtsi" + +/ { + model = "SolidRun Clearfog Base A1"; + compatible = "solidrun,clearfog-base-a1", + "solidrun,clearfog-a1", "marvell,armada388", + "marvell,armada385", "marvell,armada380"; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&rear_button_pins>; + pinctrl-names = "default"; + + button_0 { + /* The rear SW3 button */ + label = "Rear Button"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + linux,can-disable; + linux,code = <BTN_0>; + }; + }; +}; + +ð1 { + phy = <&phy1>; +}; + +&gpio0 { + phy1_reset { + gpio-hog; + gpios = <19 GPIO_ACTIVE_LOW>; + output-low; + line-name = "phy1-reset"; + }; +}; + +&mdio { + pinctrl-0 = <&mdio_pins µsom_phy_clk_pins &clearfog_phy_pins>; + phy1: ethernet-phy@1 { + /* + * Annoyingly, the marvell phy driver configures the LED + * register, rather than preserving reset-loaded setting. + * We undo that rubbish here. + */ + marvell,reg-init = <3 16 0 0x101e>; + reg = <1>; + }; +}; + +&pinctrl { + /* phy1 reset */ + clearfog_phy_pins: clearfog-phy-pins { + marvell,pins = "mpp19"; + marvell,function = "gpio"; + }; + rear_button_pins: rear-button-pins { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/armada-388-clearfog-pro.dts b/arch/arm/boot/dts/armada-388-clearfog-pro.dts new file mode 100644 index 000000000000..bd85870bbdbb --- /dev/null +++ b/arch/arm/boot/dts/armada-388-clearfog-pro.dts @@ -0,0 +1,55 @@ +/* + * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828) + * + * Copyright (C) 2015 Russell King + * + * This board is in development; the contents of this file work with + * the A1 rev 2.0 of the board, which does not represent final + * production board. Things will change, don't expect this file to + * remain compatible info the future. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include "armada-388-clearfog.dts" + +/ { + model = "SolidRun Clearfog Pro A1"; + compatible = "solidrun,clearfog-pro-a1", + "solidrun,clearfog-a1", "marvell,armada388", + "marvell,armada385", "marvell,armada380"; +}; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts index 71ce201c903e..2745b7416313 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -1,5 +1,5 @@ /* - * Device Tree file for SolidRun Clearfog revision A1 rev 2.0 (88F6828) + * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828) * * Copyright (C) 2015 Russell King * @@ -17,17 +17,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,312 +36,33 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -#include "armada-388.dtsi" -#include "armada-38x-solidrun-microsom.dtsi" +#include "armada-388-clearfog.dtsi" / { model = "SolidRun Clearfog A1"; compatible = "solidrun,clearfog-a1", "marvell,armada388", "marvell,armada385", "marvell,armada380"; - aliases { - /* So that mvebu u-boot can update the MAC addresses */ - ethernet1 = ð0; - ethernet2 = ð1; - ethernet3 = ð2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - soc { internal-regs { - ethernet@30000 { - phy-mode = "sgmii"; - buffer-manager = <&bm>; - bm,pool-long = <2>; - bm,pool-short = <1>; - status = "okay"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - ethernet@34000 { - phy-mode = "sgmii"; - buffer-manager = <&bm>; - bm,pool-long = <3>; - bm,pool-short = <1>; - status = "okay"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - i2c@11000 { - /* Is there anything on this? */ - clock-frequency = <100000>; - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - status = "okay"; - - /* - * PCA9655 GPIO expander, up to 1MHz clock. - * 0-CON3 CLKREQ# - * 1-CON3 PERST# - * 2-CON2 PERST# - * 3-CON3 W_DISABLE - * 4-CON2 CLKREQ# - * 5-USB3 overcurrent - * 6-USB3 power - * 7-CON2 W_DISABLE - * 8-JP4 P1 - * 9-JP4 P4 - * 10-JP4 P5 - * 11-m.2 DEVSLP - * 12-SFP_LOS - * 13-SFP_TX_FAULT - * 14-SFP_TX_DISABLE - * 15-SFP_MOD_DEF0 - */ - expander0: gpio-expander@20 { - /* - * This is how it should be: - * compatible = "onnn,pca9655", - * "nxp,pca9555"; - * but you can't do this because of - * the way I2C works. - */ - compatible = "nxp,pca9555"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x20>; - - pcie1_0_clkreq { - gpio-hog; - gpios = <0 GPIO_ACTIVE_LOW>; - input; - line-name = "pcie1.0-clkreq"; - }; - pcie1_0_w_disable { - gpio-hog; - gpios = <3 GPIO_ACTIVE_LOW>; - output-low; - line-name = "pcie1.0-w-disable"; - }; - pcie2_0_clkreq { - gpio-hog; - gpios = <4 GPIO_ACTIVE_LOW>; - input; - line-name = "pcie2.0-clkreq"; - }; - pcie2_0_w_disable { - gpio-hog; - gpios = <7 GPIO_ACTIVE_LOW>; - output-low; - line-name = "pcie2.0-w-disable"; - }; - usb3_ilimit { - gpio-hog; - gpios = <5 GPIO_ACTIVE_LOW>; - input; - line-name = "usb3-current-limit"; - }; - usb3_power { - gpio-hog; - gpios = <6 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "usb3-power"; - }; - m2_devslp { - gpio-hog; - gpios = <11 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "m.2 devslp"; - }; - sfp_los { - /* SFP loss of signal */ - gpio-hog; - gpios = <12 GPIO_ACTIVE_HIGH>; - input; - line-name = "sfp-los"; - }; - sfp_tx_fault { - /* SFP laser fault */ - gpio-hog; - gpios = <13 GPIO_ACTIVE_HIGH>; - input; - line-name = "sfp-tx-fault"; - }; - sfp_tx_disable { - /* SFP transmit disable */ - gpio-hog; - gpios = <14 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "sfp-tx-disable"; - }; - sfp_mod_def0 { - /* SFP module present */ - gpio-hog; - gpios = <15 GPIO_ACTIVE_LOW>; - input; - line-name = "sfp-mod-def0"; - }; - }; - - /* The MCP3021 is 100kHz clock only */ - mikrobus_adc: mcp3021@4c { - compatible = "microchip,mcp3021"; - reg = <0x4c>; - }; - - /* Also something at 0x64 */ - }; - - i2c@11100 { - /* - * Routed to SFP, mikrobus, and PCIe. - * SFP limits this to 100kHz, and requires - * an AT24C01A/02/04 with address pins tied - * low, which takes addresses 0x50 and 0x51. - * Mikrobus doesn't specify beyond an I2C - * bus being present. - * PCIe uses ARP to assign addresses, or - * 0x63-0x64. - */ - clock-frequency = <100000>; - pinctrl-0 = <&clearfog_i2c1_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - pinctrl@18000 { - clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins { - marvell,pins = "mpp46"; - marvell,function = "ref"; - }; - clearfog_dsa0_pins: clearfog-dsa0-pins { - marvell,pins = "mpp23", "mpp41"; - marvell,function = "gpio"; - }; - clearfog_i2c1_pins: i2c1-pins { - /* SFP, PCIe, mSATA, mikrobus */ - marvell,pins = "mpp26", "mpp27"; - marvell,function = "i2c1"; - }; - clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins { - marvell,pins = "mpp20"; - marvell,function = "gpio"; - }; - clearfog_sdhci_pins: clearfog-sdhci-pins { - marvell,pins = "mpp21", "mpp28", - "mpp37", "mpp38", - "mpp39", "mpp40"; - marvell,function = "sd0"; - }; - clearfog_spi1_cs_pins: spi1-cs-pins { - marvell,pins = "mpp55"; - marvell,function = "spi1"; - }; - mikro_pins: mikro-pins { - /* int: mpp22 rst: mpp29 */ - marvell,pins = "mpp22", "mpp29"; - marvell,function = "gpio"; - }; - mikro_spi_pins: mikro-spi-pins { - marvell,pins = "mpp43"; - marvell,function = "spi1"; - }; - mikro_uart_pins: mikro-uart-pins { - marvell,pins = "mpp24", "mpp25"; - marvell,function = "ua1"; - }; - rear_button_pins: rear-button-pins { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; - }; - - sata@a8000 { - /* pinctrl? */ - status = "okay"; - }; - - sata@e0000 { - /* pinctrl? */ - status = "okay"; - }; - - sdhci@d8000 { - bus-width = <4>; - cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; - no-1-8-v; - pinctrl-0 = <&clearfog_sdhci_pins - &clearfog_sdhci_cd_pins>; - pinctrl-names = "default"; - status = "okay"; - vmmc = <®_3p3v>; - wp-inverted; - }; - - serial@12100 { - /* mikrobus uart */ - pinctrl-0 = <&mikro_uart_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - usb@58000 { - /* CON3, nearest power. */ - status = "okay"; - }; - usb3@f0000 { /* CON2, nearest CPU, USB2 only. */ status = "okay"; }; - - usb3@f8000 { - /* CON7 */ - status = "okay"; - }; }; pcie-controller { - status = "okay"; - /* - * The two PCIe units are accessible through - * the mini-PCIe connectors on the board. - */ - pcie@2,0 { - /* Port 1, Lane 0. CON3, nearest power. */ - reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>; - status = "okay"; - }; pcie@3,0 { /* Port 2, Lane 0. CON2, nearest CPU. */ reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>; @@ -351,6 +72,8 @@ }; dsa@0 { + status = "disabled"; + compatible = "marvell,dsa"; dsa,ethernet = <ð1>; dsa,mii-bus = <&mdio>; @@ -421,26 +144,136 @@ }; }; -&spi1 { +ð1 { + /* ethernet@30000 */ + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&expander0 { /* - * We don't seem to have the W25Q32 on the - * A1 Rev 2.0 boards, so disable SPI. - * CS0: W25Q32 (doesn't appear to be present) - * CS1: - * CS2: mikrobus + * PCA9655 GPIO expander: + * 0-CON3 CLKREQ# + * 1-CON3 PERST# + * 2-CON2 PERST# + * 3-CON3 W_DISABLE + * 4-CON2 CLKREQ# + * 5-USB3 overcurrent + * 6-USB3 power + * 7-CON2 W_DISABLE + * 8-JP4 P1 + * 9-JP4 P4 + * 10-JP4 P5 + * 11-m.2 DEVSLP + * 12-SFP_LOS + * 13-SFP_TX_FAULT + * 14-SFP_TX_DISABLE + * 15-SFP_MOD_DEF0 */ - pinctrl-0 = <&spi1_pins - &clearfog_spi1_cs_pins - &mikro_spi_pins>; - pinctrl-names = "default"; + pcie2_0_clkreq { + gpio-hog; + gpios = <4 GPIO_ACTIVE_LOW>; + input; + line-name = "pcie2.0-clkreq"; + }; + pcie2_0_w_disable { + gpio-hog; + gpios = <7 GPIO_ACTIVE_LOW>; + output-low; + line-name = "pcie2.0-w-disable"; + }; +}; + +&pinctrl { + clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins { + marvell,pins = "mpp46"; + marvell,function = "ref"; + }; + clearfog_dsa0_pins: clearfog-dsa0-pins { + marvell,pins = "mpp23", "mpp41"; + marvell,function = "gpio"; + }; + clearfog_spi1_cs_pins: spi1-cs-pins { + marvell,pins = "mpp55"; + marvell,function = "spi1"; + }; + rear_button_pins: rear-button-pins { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; +}; + +&mdio { status = "okay"; - spi-flash@0 { + switch@4 { + compatible = "marvell,mv88e6085"; #address-cells = <1>; #size-cells = <0>; - compatible = "w25q32", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <3000000>; - status = "disabled"; + reg = <4>; + pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>; + pinctrl-names = "default"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan5"; + }; + + port@1 { + reg = <1>; + label = "lan4"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan2"; + }; + + port@4 { + reg = <4>; + label = "lan1"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð1>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@6 { + /* 88E1512 external phy */ + reg = <6>; + label = "lan6"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; }; }; + +&spi1 { + /* + * Add SPI CS pins for clearfog: + * CS0: W25Q32 (not populated on uSOM) + * CS1: + * CS2: mikrobus + */ + pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>; +}; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi new file mode 100644 index 000000000000..0f5938bede53 --- /dev/null +++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi @@ -0,0 +1,307 @@ +/* + * Device Tree include file for SolidRun Clearfog 88F6828 based boards + * + * Copyright (C) 2015 Russell King + * + * This board is in development; the contents of this file work with + * the A1 rev 2.0 of the board, which does not represent final + * production board. Things will change, don't expect this file to + * remain compatible info the future. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "armada-388.dtsi" +#include "armada-38x-solidrun-microsom.dtsi" + +/ { + aliases { + /* So that mvebu u-boot can update the MAC addresses */ + ethernet1 = ð0; + ethernet2 = ð1; + ethernet3 = ð2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + soc { + internal-regs { + sata@a8000 { + /* pinctrl? */ + status = "okay"; + }; + + sata@e0000 { + /* pinctrl? */ + status = "okay"; + }; + + sdhci@d8000 { + bus-width = <4>; + cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + no-1-8-v; + pinctrl-0 = <µsom_sdhci_pins + &clearfog_sdhci_cd_pins>; + pinctrl-names = "default"; + status = "okay"; + vmmc = <®_3p3v>; + wp-inverted; + }; + + usb@58000 { + /* CON3, nearest power. */ + status = "okay"; + }; + + usb3@f8000 { + /* CON7 */ + status = "okay"; + }; + }; + + pcie-controller { + status = "okay"; + /* + * The two PCIe units are accessible through + * the mini-PCIe connectors on the board. + */ + pcie@2,0 { + /* Port 1, Lane 0. CON3, nearest power. */ + reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>; + status = "okay"; + }; + }; + }; +}; + +ð1 { + /* ethernet@30000 */ + bm,pool-long = <2>; + bm,pool-short = <1>; + buffer-manager = <&bm>; + phy-mode = "sgmii"; + status = "okay"; +}; + +ð2 { + /* ethernet@34000 */ + bm,pool-long = <3>; + bm,pool-short = <1>; + buffer-manager = <&bm>; + phy-mode = "sgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&i2c0 { + /* Is there anything on this? */ + clock-frequency = <100000>; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; + + /* + * PCA9655 GPIO expander, up to 1MHz clock. + * 0-CON3 CLKREQ# + * 1-CON3 PERST# + * 2- + * 3-CON3 W_DISABLE + * 4- + * 5-USB3 overcurrent + * 6-USB3 power + * 7- + * 8-JP4 P1 + * 9-JP4 P4 + * 10-JP4 P5 + * 11-m.2 DEVSLP + * 12-SFP_LOS + * 13-SFP_TX_FAULT + * 14-SFP_TX_DISABLE + * 15-SFP_MOD_DEF0 + */ + expander0: gpio-expander@20 { + /* + * This is how it should be: + * compatible = "onnn,pca9655", "nxp,pca9555"; + * but you can't do this because of the way I2C works. + */ + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + + pcie1_0_clkreq { + gpio-hog; + gpios = <0 GPIO_ACTIVE_LOW>; + input; + line-name = "pcie1.0-clkreq"; + }; + pcie1_0_w_disable { + gpio-hog; + gpios = <3 GPIO_ACTIVE_LOW>; + output-low; + line-name = "pcie1.0-w-disable"; + }; + usb3_ilimit { + gpio-hog; + gpios = <5 GPIO_ACTIVE_LOW>; + input; + line-name = "usb3-current-limit"; + }; + usb3_power { + gpio-hog; + gpios = <6 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb3-power"; + }; + m2_devslp { + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "m.2 devslp"; + }; + sfp_los { + /* SFP loss of signal */ + gpio-hog; + gpios = <12 GPIO_ACTIVE_HIGH>; + input; + line-name = "sfp-los"; + }; + sfp_tx_fault { + /* SFP laser fault */ + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; + input; + line-name = "sfp-tx-fault"; + }; + sfp_tx_disable { + /* SFP transmit disable */ + gpio-hog; + gpios = <14 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "sfp-tx-disable"; + }; + sfp_mod_def0 { + /* SFP module present */ + gpio-hog; + gpios = <15 GPIO_ACTIVE_LOW>; + input; + line-name = "sfp-mod-def0"; + }; + }; + + /* The MCP3021 is 100kHz clock only */ + mikrobus_adc: mcp3021@4c { + compatible = "microchip,mcp3021"; + reg = <0x4c>; + }; + + /* Also something at 0x64 */ +}; + +&i2c1 { + /* + * Routed to SFP, mikrobus, and PCIe. + * SFP limits this to 100kHz, and requires an AT24C01A/02/04 with + * address pins tied low, which takes addresses 0x50 and 0x51. + * Mikrobus doesn't specify beyond an I2C bus being present. + * PCIe uses ARP to assign addresses, or 0x63-0x64. + */ + clock-frequency = <100000>; + pinctrl-0 = <&clearfog_i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pinctrl { + clearfog_i2c1_pins: i2c1-pins { + /* SFP, PCIe, mSATA, mikrobus */ + marvell,pins = "mpp26", "mpp27"; + marvell,function = "i2c1"; + }; + clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins { + marvell,pins = "mpp20"; + marvell,function = "gpio"; + }; + mikro_pins: mikro-pins { + /* int: mpp22 rst: mpp29 */ + marvell,pins = "mpp22", "mpp29"; + marvell,function = "gpio"; + }; + mikro_spi_pins: mikro-spi-pins { + marvell,pins = "mpp43"; + marvell,function = "spi1"; + }; + mikro_uart_pins: mikro-uart-pins { + marvell,pins = "mpp24", "mpp25"; + marvell,function = "ua1"; + }; +}; + +&spi1 { + /* + * Add SPI CS pins for clearfog: + * CS0: W25Q32 (not populated on uSOM) + * CS1: PIC microcontroller (Pro models) + * CS2: mikrobus + */ + pinctrl-0 = <&spi1_pins &mikro_spi_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart1 { + /* mikrobus uart */ + pinctrl-0 = <&mikro_uart_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index de26c762239c..1ac923826445 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -16,17 +16,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -35,11 +35,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts index dd3462ddb6b9..af82f275eac2 100644 --- a/arch/arm/boot/dts/armada-388-rd.dts +++ b/arch/arm/boot/dts/armada-388-rd.dts @@ -17,17 +17,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi index 8c9842237b60..9b508a8161f5 100644 --- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi +++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi @@ -17,17 +17,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -62,45 +62,6 @@ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { - ethernet@70000 { - pinctrl-0 = <&ge0_rgmii_pins>; - pinctrl-names = "default"; - phy = <&phy_dedicated>; - phy-mode = "rgmii-id"; - buffer-manager = <&bm>; - bm,pool-long = <0>; - bm,pool-short = <1>; - status = "okay"; - }; - - mdio@72004 { - /* - * Add the phy clock here, so the phy can be - * accessed to read its IDs prior to binding - * with the driver. - */ - pinctrl-0 = <&mdio_pins µsom_phy_clk_pins>; - pinctrl-names = "default"; - - phy_dedicated: ethernet-phy@0 { - /* - * Annoyingly, the marvell phy driver - * configures the LED register, rather - * than preserving reset-loaded setting. - * We undo that rubbish here. - */ - marvell,reg-init = <3 16 0 0x101e>; - reg = <0>; - }; - }; - - pinctrl@18000 { - microsom_phy_clk_pins: microsom-phy-clk-pins { - marvell,pins = "mpp45"; - marvell,function = "ref"; - }; - }; - rtc@a3800 { /* * If the rtc doesn't work, run "date reset" @@ -108,21 +69,78 @@ */ status = "okay"; }; + }; + }; +}; - serial@12000 { - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; - status = "okay"; - }; +&bm { + status = "okay"; +}; - bm@c8000 { - status = "okay"; - }; - }; +&bm_bppi { + status = "okay"; +}; - bm-bppi { - status = "okay"; - }; +ð0 { + /* ethernet@70000 */ + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; + phy = <&phy_dedicated>; + phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; + status = "okay"; +}; + +&mdio { + /* + * Add the phy clock here, so the phy can be accessed to read its + * IDs prior to binding with the driver. + */ + pinctrl-0 = <&mdio_pins µsom_phy_clk_pins>; + pinctrl-names = "default"; + + phy_dedicated: ethernet-phy@0 { + /* + * Annoyingly, the marvell phy driver configures the LED + * register, rather than preserving reset-loaded setting. + * We undo that rubbish here. + */ + marvell,reg-init = <3 16 0 0x101e>; + reg = <0>; + }; +}; + +&pinctrl { + microsom_phy_clk_pins: microsom-phy-clk-pins { + marvell,pins = "mpp45"; + marvell,function = "ref"; + }; + /* Optional eMMC */ + microsom_sdhci_pins: microsom-sdhci-pins { + marvell,pins = "mpp21", "mpp28", "mpp37", + "mpp38", "mpp39", "mpp40"; + marvell,function = "sd0"; + }; +}; + +&spi1 { + /* The microsom has an optional W25Q32 on board, connected to CS0 */ + pinctrl-0 = <&spi1_pins>; + w25q32: spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25q32", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <3000000>; + status = "disabled"; }; }; + +&uart0 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 2d7668848c5a..79b767507eab 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -17,17 +17,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -661,7 +661,7 @@ }; clocks { - /* 2 GHz fixed main PLL */ + /* 1 GHz fixed main PLL */ mainpll: mainpll { compatible = "fixed-clock"; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts index 34e279d973c8..2afed2ce4741 100644 --- a/arch/arm/boot/dts/armada-390-db.dts +++ b/arch/arm/boot/dts/armada-390-db.dts @@ -16,17 +16,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -35,11 +35,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-390.dtsi b/arch/arm/boot/dts/armada-390.dtsi index 6cd18d8aaac7..0d8a54ad007c 100644 --- a/arch/arm/boot/dts/armada-390.dtsi +++ b/arch/arm/boot/dts/armada-390.dtsi @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-395.dtsi b/arch/arm/boot/dts/armada-395.dtsi index ab5dc49f2bff..bf7e4335e36a 100644 --- a/arch/arm/boot/dts/armada-395.dtsi +++ b/arch/arm/boot/dts/armada-395.dtsi @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts index 268c8349c884..e8604281c3c9 100644 --- a/arch/arm/boot/dts/armada-398-db.dts +++ b/arch/arm/boot/dts/armada-398-db.dts @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-398.dtsi b/arch/arm/boot/dts/armada-398.dtsi index 234a99891a29..1f4e113fc821 100644 --- a/arch/arm/boot/dts/armada-398.dtsi +++ b/arch/arm/boot/dts/armada-398.dtsi @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi index 34cba87f9200..60fbfd5907c7 100644 --- a/arch/arm/boot/dts/armada-39x.dtsi +++ b/arch/arm/boot/dts/armada-39x.dtsi @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -573,7 +573,7 @@ }; clocks { - /* 2 GHz fixed main PLL */ + /* 1 GHz fixed main PLL */ mainpll: mainpll { compatible = "fixed-clock"; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi new file mode 100644 index 000000000000..f6a03dcee5ef --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi @@ -0,0 +1,254 @@ +/* + * Device Tree Include file for Marvell 98dx3236 family SoC + * + * Copyright (C) 2016 Allied Telesis Labs + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Contains definitions specific to the 98dx3236 SoC that are not + * common to all Armada XP SoCs. + */ + +#include "armada-xp.dtsi" + +/ { + model = "Marvell 98DX3236 SoC"; + compatible = "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp"; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "marvell,98dx3236-smp"; + + cpu@0 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <0>; + clocks = <&cpuclk 0>; + clock-latency = <1000000>; + }; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000 + MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000 + MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>; + + /* + * 98DX3236 has 1 x1 PCIe unit Gen2.0 + */ + pciec: pcie-controller@82000000 { + compatible = "marvell,armada-xp-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + msi-parent = <&mpic>; + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */>; + + pcie1: pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + }; + + internal-regs { + coreclk: mvebu-sar@18230 { + compatible = "marvell,mv98dx3236-core-clock"; + }; + + cpuclk: clock-complex@18700 { + compatible = "marvell,mv98dx3236-cpu-clock"; + }; + + corediv-clock@18740 { + status = "disabled"; + }; + + xor@60900 { + status = "disabled"; + }; + + crypto@90000 { + status = "disabled"; + }; + + xor@f0900 { + status = "disabled"; + }; + + xor@f0800 { + compatible = "marvell,orion-xor"; + reg = <0xf0800 0x100 + 0xf0a00 0x100>; + clocks = <&gateclk 22>; + status = "okay"; + + xor10 { + interrupts = <51>; + dmacap,memcpy; + dmacap,xor; + }; + xor11 { + interrupts = <52>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; + }; + + gpio0: gpio@18100 { + compatible = "marvell,orion-gpio"; + reg = <0x18100 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; + }; + + /* does not exist */ + gpio1: gpio@18140 { + compatible = "marvell,orion-gpio"; + reg = <0x18140 0x40>; + status = "disabled"; + }; + + gpio2: gpio@18180 { /* rework some properties */ + compatible = "marvell,orion-gpio"; + reg = <0x18180 0x40>; + ngpios = <1>; /* only gpio #32 */ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <87>; + }; + + nand: nand@d0000 { + clocks = <&dfx_coredivclk 0>; + }; + }; + + dfxr: dfx-registers@ac000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>; + + dfx_coredivclk: corediv-clock@f8268 { + compatible = "marvell,mv98dx3236-corediv-clock"; + reg = <0xf8268 0xc>; + #clock-cells = <1>; + clocks = <&mainpll>; + clock-output-names = "nand"; + }; + + dfx: dfx@0 { + compatible = "marvell,dfx-server"; + reg = <0 0x100000>; + }; + }; + + switch: switch@a8000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>; + + pp0: packet-processor@0 { + compatible = "marvell,prestera-98dx3236"; + reg = <0 0x4000000>; + interrupts = <33>, <34>, <35>; + dfx = <&dfx>; + }; + }; + }; +}; + +&pinctrl { + compatible = "marvell,98dx3236-pinctrl"; + + spi0_pins: spi0-pins { + marvell,pins = "mpp0", "mpp1", + "mpp2", "mpp3"; + marvell,function = "spi0"; + }; +}; + +&sdio { + status = "disabled"; +}; + +&crypto_sram0 { + status = "disabled"; +}; + +&crypto_sram1 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi new file mode 100644 index 000000000000..e1580afdc260 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi @@ -0,0 +1,76 @@ +/* + * Device Tree Include file for Marvell 98dx3336 family SoC + * + * Copyright (C) 2016 Allied Telesis Labs + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Contains definitions specific to the 98dx3236 SoC that are not + * common to all Armada XP SoCs. + */ + +#include "armada-xp-98dx3236.dtsi" + +/ { + model = "Marvell 98DX3336 SoC"; + compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp"; + + cpus { + cpu@1 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <1>; + clocks = <&cpuclk 1>; + clock-latency = <1000000>; + }; + }; + + soc { + internal-regs { + resume@20980 { + compatible = "marvell,98dx3336-resume-ctrl"; + reg = <0x20980 0x10>; + }; + }; + }; +}; + +&pp0 { + compatible = "marvell,prestera-98dx3336"; +}; diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi new file mode 100644 index 000000000000..b9d9b269efb4 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi @@ -0,0 +1,90 @@ +/* + * Device Tree Include file for Marvell 98dx4521 family SoC + * + * Copyright (C) 2016 Allied Telesis Labs + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Contains definitions specific to the 98dx4521 SoC that are not + * common to all Armada XP SoCs. + */ + +#include "armada-xp-98dx3236.dtsi" + +/ { + model = "Marvell 98DX4251 SoC"; + compatible = "marvell,armadaxp-98dx4251", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp"; + + cpus { + cpu@1 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <1>; + clocks = <&cpuclk 1>; + clock-latency = <1000000>; + }; + }; + + soc { + internal-regs { + resume@20980 { + compatible = "marvell,98dx3336-resume-ctrl"; + reg = <0x20980 0x10>; + }; + }; + }; +}; + +&sdio { + status = "okay"; +}; + +&pinctrl { + compatible = "marvell,98dx4251-pinctrl"; + + sdio_pins: sdio-pins { + marvell,pins = "mpp5", "mpp6", "mpp7", + "mpp8", "mpp9", "mpp10"; + marvell,function = "sd0"; + }; +}; + +&pp0 { + compatible = "marvell,prestera-98dx4251"; +}; diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index ce152719bc28..d0c6a01f48a6 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -20,17 +20,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -39,11 +39,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -62,7 +62,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */ }; @@ -73,28 +73,6 @@ MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; - pcie-controller { - status = "okay"; - - /* First mini-PCIe port */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* Second mini-PCIe port */ - pcie@2,0 { - /* Port 0, Lane 1 */ - status = "okay"; - }; - - /* Renesas uPD720202 USB 3.0 controller */ - pcie@3,0 { - /* Port 0, Lane 3 */ - status = "okay"; - }; - }; - internal-regs { /* UART0 */ serial@12000 { @@ -111,16 +89,6 @@ status = "okay"; }; - mdio { - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - ethernet@70000 { pinctrl-0 = <&ge0_rgmii_pins>; pinctrl-names = "default"; @@ -145,7 +113,7 @@ pinctrl-0 = <&keys_pin>; pinctrl-names = "default"; - button@1 { + reset { label = "Factory Reset Button"; linux,code = <KEY_SETUP>; gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; @@ -153,6 +121,38 @@ }; }; +&mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&pciec { + status = "okay"; + + /* First mini-PCIe port */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Second mini-PCIe port */ + pcie@2,0 { + /* Port 0, Lane 1 */ + status = "okay"; + }; + + /* Renesas uPD720202 USB 3.0 controller */ + pcie@3,0 { + /* Port 0, Lane 3 */ + status = "okay"; + }; +}; + &pinctrl { pinctrl-0 = <&phy_int_pin>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts new file mode 100644 index 000000000000..a8130805074e --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts @@ -0,0 +1,151 @@ +/* + * Device Tree file for DB-DXBC2 board + * + * Copyright (C) 2016 Allied Telesis Labs + * + * Based on armada-xp-db.dts + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the default + * 0xd0000000). The 0xf1000000 is the default used by the recent, + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier + * boards were delivered with an older version of the bootloader that + * left internal registers mapped at 0xd0000000. If you are in this + * situation, you should either update your bootloader (preferred + * solution) or the below Device Tree should be adjusted. + */ + +/dts-v1/; +#include "armada-xp-98dx4251.dtsi" + +/ { + model = "Marvell Bobcat2 Evaluation Board"; + compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x20000000>; /* 512 MB */ + }; + +}; + +&devbus_bootcs { + status = "okay"; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <16>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&nand { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; +}; + +&sdio { + pinctrl-0 = <&sdio_pins>; + pinctrl-names = "default"; + status = "okay"; + /* No CD or WP GPIOs */ + broken-cd; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p64"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + m25p,fast-read; + + partition@u-boot { + reg = <0x00000000 0x00100000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x00100000 0x00040000>; + label = "u-boot-env"; + }; + partition@unused { + reg = <0x00140000 0x00ec0000>; + label = "unused"; + }; + + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts new file mode 100644 index 000000000000..4e07cb6ed800 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts @@ -0,0 +1,142 @@ +/* + * Device Tree file for DB-XC3-24G4XG board + * + * Copyright (C) 2016 Allied Telesis Labs + * + * Based on armada-xp-db.dts + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the default + * 0xd0000000). The 0xf1000000 is the default used by the recent, + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier + * boards were delivered with an older version of the bootloader that + * left internal registers mapped at 0xd0000000. If you are in this + * situation, you should either update your bootloader (preferred + * solution) or the below Device Tree should be adjusted. + */ + +/dts-v1/; +#include "armada-xp-98dx3336.dtsi" + +/ { + model = "DB-XC3-24G4XG"; + compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x40000000>; /* 1 GB */ + }; +}; + +&devbus_bootcs { + status = "okay"; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <16>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; +}; + +&nand { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p64"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + m25p,fast-read; + + partition@u-boot { + reg = <0x00000000 0x00100000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x00100000 0x00040000>; + label = "u-boot-env"; + }; + partition@unused { + reg = <0x00140000 0x00ec0000>; + label = "unused"; + }; + + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 075120bc3ec4..a33974254d8c 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -18,17 +18,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -37,11 +37,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -67,7 +67,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0 0x00000000 0 0x80000000>; /* 2 GB */ }; @@ -108,39 +108,6 @@ }; }; - pcie-controller { - status = "okay"; - - /* - * All 6 slots are physically present as - * standard PCIe slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - pcie@2,0 { - /* Port 0, Lane 1 */ - status = "okay"; - }; - pcie@3,0 { - /* Port 0, Lane 2 */ - status = "okay"; - }; - pcie@4,0 { - /* Port 0, Lane 3 */ - status = "okay"; - }; - pcie@9,0 { - /* Port 2, Lane 0 */ - status = "okay"; - }; - pcie@10,0 { - /* Port 3, Lane 0 */ - status = "okay"; - }; - }; - internal-regs { serial@12000 { status = "okay"; @@ -160,24 +127,6 @@ status = "okay"; }; - mdio { - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - - phy2: ethernet-phy@2 { - reg = <25>; - }; - - phy3: ethernet-phy@3 { - reg = <27>; - }; - }; - ethernet@70000 { status = "okay"; phy = <&phy0>; @@ -266,6 +215,57 @@ }; }; +&pciec { + status = "okay"; + + /* + * All 6 slots are physically present as + * standard PCIe slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@2,0 { + /* Port 0, Lane 1 */ + status = "okay"; + }; + pcie@3,0 { + /* Port 0, Lane 2 */ + status = "okay"; + }; + pcie@4,0 { + /* Port 0, Lane 3 */ + status = "okay"; + }; + pcie@9,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + pcie@10,0 { + /* Port 3, Lane 0 */ + status = "okay"; + }; +}; + +&mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + + phy2: ethernet-phy@2 { + reg = <25>; + }; + + phy3: ethernet-phy@3 { + reg = <27>; + }; +}; + &spi0 { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 190e4eccb180..d62bf7bea1df 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -18,17 +18,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -37,11 +37,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -68,7 +68,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; /* * 8 GB of plug-in RAM modules by default.The amount @@ -127,27 +127,6 @@ }; }; - pcie-controller { - status = "okay"; - - /* - * The 3 slots are physically present as - * standard PCIe slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - pcie@9,0 { - /* Port 2, Lane 0 */ - status = "okay"; - }; - pcie@10,0 { - /* Port 3, Lane 0 */ - status = "okay"; - }; - }; - internal-regs { serial@12000 { status = "okay"; @@ -175,24 +154,6 @@ status = "okay"; }; - mdio { - phy0: ethernet-phy@0 { - reg = <16>; - }; - - phy1: ethernet-phy@1 { - reg = <17>; - }; - - phy2: ethernet-phy@2 { - reg = <18>; - }; - - phy3: ethernet-phy@3 { - reg = <19>; - }; - }; - ethernet@70000 { status = "okay"; phy = <&phy0>; @@ -251,6 +212,45 @@ }; }; +&pciec { + status = "okay"; + + /* + * The 3 slots are physically present as + * standard PCIe slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@9,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + pcie@10,0 { + /* Port 3, Lane 0 */ + status = "okay"; + }; +}; + +&mdio { + phy0: ethernet-phy@0 { + reg = <16>; + }; + + phy1: ethernet-phy@1 { + reg = <17>; + }; + + phy2: ethernet-phy@2 { + reg = <18>; + }; + + phy3: ethernet-phy@3 { + reg = <19>; + }; +}; + &spi0 { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index 8af463f26ea1..ce0afba1ce58 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -57,7 +57,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0 0x00000000 0 0x20000000>; /* 512MB */ }; @@ -68,37 +68,11 @@ MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; - pcie-controller { - status = "okay"; - - /* Quad port sata: Marvell 88SX7042 */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* USB 3.0 xHCI controller: NEC D720200F1 */ - pcie@5,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; - internal-regs { serial@12000 { status = "okay"; }; - mdio { - phy0: ethernet-phy@0 { /* Marvell 88E1318 */ - reg = <0>; - }; - - phy1: ethernet-phy@1 { /* Marvell 88E1318 */ - reg = <1>; - }; - }; - ethernet@70000 { pinctrl-0 = <&ge0_rgmii_pins>; pinctrl-names = "default"; @@ -295,6 +269,31 @@ gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; }; }; +&pciec { + status = "okay"; + + /* Quad port sata: Marvell 88SX7042 */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* USB 3.0 xHCI controller: NEC D720200F1 */ + pcie@5,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; +}; + +&mdio { + phy0: ethernet-phy@0 { /* Marvell 88E1318 */ + reg = <0>; + }; + + phy1: ethernet-phy@1 { /* Marvell 88E1318 */ + reg = <1>; + }; +}; &pinctrl { poweroff_pin: poweroff-pin { diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index 076f27f22c3b..42ea8764814c 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -62,7 +62,7 @@ stdout-path = &uart0; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */ }; @@ -73,28 +73,6 @@ MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; - pcie-controller { - status = "okay"; - - /* Etron EJ168 USB 3.0 controller */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* First mini-PCIe port */ - pcie@2,0 { - /* Port 0, Lane 1 */ - status = "okay"; - }; - - /* Second mini-PCIe port */ - pcie@3,0 { - /* Port 0, Lane 3 */ - status = "okay"; - }; - }; - internal-regs { rtc@10300 { @@ -289,13 +267,13 @@ pinctrl-0 = <&keys_pin>; pinctrl-names = "default"; - button@1 { + wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; }; - button@2 { + reset { label = "Factory Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; @@ -323,7 +301,9 @@ 4500 1>; }; - dsa@0 { + dsa { + status = "disabled"; + compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; @@ -369,6 +349,28 @@ }; }; +&pciec { + status = "okay"; + + /* Etron EJ168 USB 3.0 controller */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* First mini-PCIe port */ + pcie@2,0 { + /* Port 0, Lane 1 */ + status = "okay"; + }; + + /* Second mini-PCIe port */ + pcie@3,0 { + /* Port 0, Lane 3 */ + status = "okay"; + }; +}; + &pinctrl { keys_pin: keys-pin { @@ -398,3 +400,54 @@ spi-max-frequency = <40000000>; }; }; + +&mdio { + status = "okay"; + + switch@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "internet"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts index 6522b04f4a8e..977f6b3fc1f8 100644 --- a/arch/arm/boot/dts/armada-xp-matrix.dts +++ b/arch/arm/boot/dts/armada-xp-matrix.dts @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -55,7 +55,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; /* * This board has 4 GB of RAM, but the last 256 MB of @@ -99,18 +99,18 @@ }; }; - pcie-controller { - status = "okay"; - - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - }; - usb@50000 { status = "okay"; }; }; }; }; + +&pciec { + status = "okay"; + + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 6e6d0f04bf2b..07c5090ecd29 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -86,7 +86,7 @@ * configured as x4 or quad x1 lanes. One unit is * x1 only. */ - pcie-controller { + pciec: pcie-controller@82000000 { compatible = "marvell,armada-xp-pcie"; status = "disabled"; device_type = "pci"; @@ -114,7 +114,7 @@ 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>; - pcie@1,0 { + pcie1: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -131,7 +131,7 @@ status = "disabled"; }; - pcie@2,0 { + pcie2: pcie@2,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; reg = <0x1000 0 0 0 0>; @@ -148,7 +148,7 @@ status = "disabled"; }; - pcie@3,0 { + pcie3: pcie@3,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; reg = <0x1800 0 0 0 0>; @@ -165,7 +165,7 @@ status = "disabled"; }; - pcie@4,0 { + pcie4: pcie@4,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; reg = <0x2000 0 0 0 0>; @@ -182,7 +182,7 @@ status = "disabled"; }; - pcie@5,0 { + pcie5: pcie@5,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; reg = <0x2800 0 0 0 0>; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index c5fdc99f0dbe..64e936ae7b22 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -87,7 +87,7 @@ * configured as x4 or quad x1 lanes. One unit is * x4 only. */ - pcie-controller { + pciec: pcie-controller@82000000 { compatible = "marvell,armada-xp-pcie"; status = "disabled"; device_type = "pci"; @@ -129,7 +129,7 @@ 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; - pcie@1,0 { + pcie1: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -146,7 +146,7 @@ status = "disabled"; }; - pcie@2,0 { + pcie2: pcie@2,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; reg = <0x1000 0 0 0 0>; @@ -163,7 +163,7 @@ status = "disabled"; }; - pcie@3,0 { + pcie3: pcie@3,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; reg = <0x1800 0 0 0 0>; @@ -180,7 +180,7 @@ status = "disabled"; }; - pcie@4,0 { + pcie4: pcie@4,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; reg = <0x2000 0 0 0 0>; @@ -197,7 +197,7 @@ status = "disabled"; }; - pcie@5,0 { + pcie5: pcie@5,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; reg = <0x2800 0 0 0 0>; @@ -214,7 +214,7 @@ status = "disabled"; }; - pcie@6,0 { + pcie6: pcie@6,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x84000 0 0x2000>; reg = <0x3000 0 0 0 0>; @@ -231,7 +231,7 @@ status = "disabled"; }; - pcie@7,0 { + pcie7: pcie@7,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x88000 0 0x2000>; reg = <0x3800 0 0 0 0>; @@ -248,7 +248,7 @@ status = "disabled"; }; - pcie@8,0 { + pcie8: pcie@8,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>; reg = <0x4000 0 0 0 0>; @@ -265,7 +265,7 @@ status = "disabled"; }; - pcie@9,0 { + pcie9: pcie@9,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; reg = <0x4800 0 0 0 0>; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 0e24f1a38540..d1383dde43eb 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -104,7 +104,7 @@ * configured as x4 or quad x1 lanes. Two units are * x4/x1. */ - pcie-controller { + pciec: pcie-controller@82000000 { compatible = "marvell,armada-xp-pcie"; status = "disabled"; device_type = "pci"; @@ -150,7 +150,7 @@ 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; - pcie@1,0 { + pcie1: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -167,7 +167,7 @@ status = "disabled"; }; - pcie@2,0 { + pcie2: pcie@2,0 { device_type = "pci"; assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; reg = <0x1000 0 0 0 0>; @@ -184,7 +184,7 @@ status = "disabled"; }; - pcie@3,0 { + pcie3: pcie@3,0 { device_type = "pci"; assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; reg = <0x1800 0 0 0 0>; @@ -201,7 +201,7 @@ status = "disabled"; }; - pcie@4,0 { + pcie4: pcie@4,0 { device_type = "pci"; assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; reg = <0x2000 0 0 0 0>; @@ -218,7 +218,7 @@ status = "disabled"; }; - pcie@5,0 { + pcie5: pcie@5,0 { device_type = "pci"; assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; reg = <0x2800 0 0 0 0>; @@ -235,7 +235,7 @@ status = "disabled"; }; - pcie@6,0 { + pcie6: pcie@6,0 { device_type = "pci"; assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; reg = <0x3000 0 0 0 0>; @@ -252,7 +252,7 @@ status = "disabled"; }; - pcie@7,0 { + pcie7: pcie@7,0 { device_type = "pci"; assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; reg = <0x3800 0 0 0 0>; @@ -269,7 +269,7 @@ status = "disabled"; }; - pcie@8,0 { + pcie8: pcie@8,0 { device_type = "pci"; assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; reg = <0x4000 0 0 0 0>; @@ -286,7 +286,7 @@ status = "disabled"; }; - pcie@9,0 { + pcie9: pcie@9,0 { device_type = "pci"; assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; reg = <0x4800 0 0 0 0>; @@ -303,7 +303,7 @@ status = "disabled"; }; - pcie@10,0 { + pcie10: pcie@10,0 { device_type = "pci"; assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; reg = <0x5000 0 0 0 0>; diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index d19f44c70925..40c6fe21e720 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -56,7 +56,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0 0x00000000 0 0x80000000>; /* 2GB */ }; @@ -67,28 +67,6 @@ MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; - pcie-controller { - status = "okay"; - - /* Connected to first Marvell 88SE9170 SATA controller */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* Connected to second Marvell 88SE9170 SATA controller */ - pcie@2,0 { - /* Port 0, Lane 1 */ - status = "okay"; - }; - - /* Connected to Fresco Logic FL1009 USB 3.0 controller */ - pcie@5,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; - internal-regs { /* RTC is provided by Intersil ISL12057 I2C RTC chip */ @@ -97,7 +75,6 @@ }; i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; clock-frequency = <400000>; status = "okay"; @@ -154,23 +131,19 @@ status = "okay"; }; - mdio { - phy0: ethernet-phy@0 { /* Marvell 88E1318 */ - reg = <0>; - }; - - phy1: ethernet-phy@1 { /* Marvell 88E1318 */ - reg = <1>; - }; - }; - ethernet@70000 { + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; }; ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; @@ -295,6 +268,39 @@ }; }; +&pciec { + status = "okay"; + + /* Connected to first Marvell 88SE9170 SATA controller */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Connected to second Marvell 88SE9170 SATA controller */ + pcie@2,0 { + /* Port 0, Lane 1 */ + status = "okay"; + }; + + /* Connected to Fresco Logic FL1009 USB 3.0 controller */ + pcie@5,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; +}; + +&mdio { + phy0: ethernet-phy@0 { /* Marvell 88E1318 */ + reg = <0>; + }; + + phy1: ethernet-phy@1 { /* Marvell 88E1318 */ + reg = <1>; + }; +}; + + &pinctrl { poweroff: poweroff { marvell,pins = "mpp42"; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index ed3b889d16ce..66b78131a038 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -57,7 +57,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */ }; @@ -98,15 +98,6 @@ }; }; - pcie-controller { - status = "okay"; - /* Internal mini-PCIe connector */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - }; - internal-regs { rtc@10300 { /* No crystal connected to the internal RTC */ @@ -148,31 +139,13 @@ #address-cells = <1>; #size-cells = <0>; - button@1 { + init { label = "Init Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; }; }; - mdio { - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - - phy2: ethernet-phy@2 { - reg = <2>; - }; - - phy3: ethernet-phy@3 { - reg = <3>; - }; - }; - ethernet@70000 { status = "okay"; phy = <&phy0>; @@ -240,6 +213,33 @@ }; }; +&pciec { + status = "okay"; + /* Internal mini-PCIe connector */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; +}; + +&mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + + phy2: ethernet-phy@2 { + reg = <2>; + }; + + phy3: ethernet-phy@3 { + reg = <3>; + }; +}; + &pinctrl { led_pins: led-pins-0 { marvell,pins = "mpp49", "mpp51", "mpp53"; diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index ae286736b90a..d8e05bab0cee 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -70,7 +70,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0 0x00000000 0 0x40000000>; /* 1GB */ }; @@ -81,28 +81,6 @@ MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; - pcie-controller { - status = "okay"; - - /* - * Connected to Marvell 88SX7042 SATA-II controller - * handling the four disks. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* - * Connected to EtronTech EJ168A XHCI controller - * providing the two rear USB 3.0 ports. - */ - pcie@5,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; - internal-regs { /* RTC is provided by Seiko S-35390A below */ @@ -150,16 +128,6 @@ status = "okay"; }; - mdio { - phy0: ethernet-phy@0 { /* Marvell 88E1512 */ - reg = <0>; - }; - - phy1: ethernet-phy@1 { /* Marvell 88E1512 */ - reg = <1>; - }; - }; - ethernet@70000 { status = "okay"; pinctrl-0 = <&ge0_rgmii_pins>; @@ -186,7 +154,7 @@ &sata3_pwr_pin &sata4_pwr_pin>; pinctrl-names = "default"; - sata1_regulator: sata1-regulator { + sata1_regulator: sata1-regulator@1 { compatible = "regulator-fixed"; reg = <1>; regulator-name = "SATA1 Power"; @@ -199,7 +167,7 @@ gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; - sata2_regulator: sata2-regulator { + sata2_regulator: sata2-regulator@2 { compatible = "regulator-fixed"; reg = <2>; regulator-name = "SATA2 Power"; @@ -212,7 +180,7 @@ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; }; - sata3_regulator: sata3-regulator { + sata3_regulator: sata3-regulator@3 { compatible = "regulator-fixed"; reg = <3>; regulator-name = "SATA3 Power"; @@ -225,7 +193,7 @@ gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; }; - sata4_regulator: sata4-regulator { + sata4_regulator: sata4-regulator@4 { compatible = "regulator-fixed"; reg = <4>; regulator-name = "SATA4 Power"; @@ -240,6 +208,39 @@ }; }; +&pciec { + status = "okay"; + + /* + * Connected to Marvell 88SX7042 SATA-II controller + * handling the four disks. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* + * Connected to EtronTech EJ168A XHCI controller + * providing the two rear USB 3.0 ports. + */ + pcie@5,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; +}; + + +&mdio { + phy0: ethernet-phy@0 { /* Marvell 88E1512 */ + reg = <0>; + }; + + phy1: ethernet-phy@1 { /* Marvell 88E1512 */ + reg = <1>; + }; +}; + &pinctrl { sata1_pwr_pin: sata1-pwr-pin { marvell,pins = "mpp42"; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 4a5f99e65b51..fa1e881266ac 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -18,17 +18,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -37,11 +37,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -53,6 +53,9 @@ #include "armada-370-xp.dtsi" / { + #address-cells = <2>; + #size-cells = <2>; + model = "Marvell Armada XP family SoC"; compatible = "marvell,armadaxp", "marvell,armada-370-xp"; @@ -75,7 +78,7 @@ reg = <0x1400 0x500>; }; - L2: l2-cache { + L2: l2-cache@8000 { compatible = "marvell,aurora-system-cache"; reg = <0x08000 0x1000>; cache-id-part = <0x100>; @@ -84,16 +87,6 @@ wt-override; }; - i2c0: i2c@11000 { - compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; - reg = <0x11000 0x100>; - }; - - i2c1: i2c@11100 { - compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; - reg = <0x11100 0x100>; - }; - uart2: serial@12200 { compatible = "snps,dw-apb-uart"; pinctrl-0 = <&uart2_pins>; @@ -118,7 +111,7 @@ status = "disabled"; }; - system-controller@18200 { + systemc: system-controller@18200 { compatible = "marvell,armada-370-xp-system-controller"; reg = <0x18200 0x500>; }; @@ -136,7 +129,7 @@ #clock-cells = <1>; }; - thermal@182b0 { + thermal: thermal@182b0 { compatible = "marvell,armadaxp-thermal"; reg = <0x182b0 0x4 0x184d0 0x4>; @@ -150,27 +143,6 @@ clocks = <&coreclk 1>; }; - interrupt-controller@20a00 { - reg = <0x20a00 0x2d0>, <0x21070 0x58>; - }; - - timer@20300 { - compatible = "marvell,armada-xp-timer"; - clocks = <&coreclk 2>, <&refclk>; - clock-names = "nbclk", "fixed"; - }; - - watchdog@20300 { - compatible = "marvell,armada-xp-wdt"; - clocks = <&coreclk 2>, <&refclk>; - clock-names = "nbclk", "fixed"; - }; - - cpurst@20800 { - compatible = "marvell,armada-370-cpu-reset"; - reg = <0x20800 0x20>; - }; - cpu-config@21000 { compatible = "marvell,armada-xp-cpu-config"; reg = <0x21000 0x8>; @@ -184,15 +156,7 @@ status = "disabled"; }; - usb@50000 { - clocks = <&gateclk 18>; - }; - - usb@51000 { - clocks = <&gateclk 19>; - }; - - usb@52000 { + usb2: usb@52000 { compatible = "marvell,orion-ehci"; reg = <0x52000 0x500>; interrupts = <47>; @@ -200,7 +164,7 @@ status = "disabled"; }; - xor@60900 { + xor1: xor@60900 { compatible = "marvell,orion-xor"; reg = <0x60900 0x100 0x60b00 0x100>; @@ -228,7 +192,7 @@ compatible = "marvell,armada-xp-neta"; }; - crypto@90000 { + cesa: crypto@90000 { compatible = "marvell,armada-xp-crypto"; reg = <0x90000 0x10000>; reg-names = "regs"; @@ -248,7 +212,7 @@ status = "disabled"; }; - xor@f0900 { + xor0: xor@f0900 { compatible = "marvell,orion-xor"; reg = <0xF0900 0x100 0xF0B00 0x100>; @@ -309,6 +273,44 @@ }; }; +&i2c0 { + compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; + reg = <0x11000 0x100>; +}; + +&i2c1 { + compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; + reg = <0x11100 0x100>; +}; + +&mpic { + reg = <0x20a00 0x2d0>, <0x21070 0x58>; +}; + +&timer { + compatible = "marvell,armada-xp-timer"; + clocks = <&coreclk 2>, <&refclk>; + clock-names = "nbclk", "fixed"; +}; + +&watchdog { + compatible = "marvell,armada-xp-wdt"; + clocks = <&coreclk 2>, <&refclk>; + clock-names = "nbclk", "fixed"; +}; + +&cpurst { + reg = <0x20800 0x20>; +}; + +&usb0 { + clocks = <&gateclk 18>; +}; + +&usb1 { + clocks = <&gateclk 19>; +}; + &pinctrl { ge0_gmii_pins: ge0-gmii-pins { marvell,pins = diff --git a/arch/arm/boot/dts/artpec6-devboard.dts b/arch/arm/boot/dts/artpec6-devboard.dts index f823ed382ac7..9dfe845694cf 100644 --- a/arch/arm/boot/dts/artpec6-devboard.dts +++ b/arch/arm/boot/dts/artpec6-devboard.dts @@ -46,6 +46,10 @@ status = "okay"; }; +&pcie { + status = "okay"; +}; + ðernet { status = "okay"; diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi index 3489019cc0dc..767cbe8d8557 100644 --- a/arch/arm/boot/dts/artpec6.dtsi +++ b/arch/arm/boot/dts/artpec6.dtsi @@ -67,7 +67,7 @@ }; }; - syscon { + syscon: syscon@f8000000 { compatible = "axis,artpec6-syscon", "syscon"; reg = <0xf8000000 0x48>; }; @@ -154,6 +154,33 @@ interrupt-parent = <&intc>; }; + pcie: pcie@f8050000 { + compatible = "axis,artpec6-pcie", "snps,dw-pcie"; + reg = <0xf8050000 0x2000 + 0xf8040000 0x1000 + 0xc0000000 0x2000>; + reg-names = "dbi", "phy", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + /* downstream I/O */ + ranges = <0x81000000 0 0 0xc0002000 0 0x00010000 + /* non-prefetchable memory */ + 0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>; + num-lanes = <2>; + bus-range = <0x00 0xff>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + axis,syscon-pcie = <&syscon>; + status = "disabled"; + }; + amba@0 { compatible = "simple-bus"; #address-cells = <0x1>; diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts index 1b7a5ff0e533..d967603dade8 100644 --- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts @@ -23,3 +23,17 @@ &uart5 { status = "okay"; }; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; +}; + +&mac1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts index cc5fcf2940bf..1d2fc1e1dc29 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts @@ -12,14 +12,34 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,38400 earlyprintk"; + bootargs = "console=ttyS4,115200 earlyprintk"; }; memory { - reg = <0x40000000 0x10000000>; + reg = <0x40000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@5f000000 { + no-map; + reg = <0x5f000000 0x01000000>; /* 16M */ + }; }; }; &uart5 { status = "okay"; }; + +&mac0 { + status = "okay"; + + use-ncsi; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts new file mode 100644 index 000000000000..7a3b2b50c884 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -0,0 +1,45 @@ +/dts-v1/; + +#include "aspeed-g5.dtsi" + +/ { + model = "Romulus BMC"; + compatible = "ibm,romulus-bmc", "aspeed,ast2500"; + + aliases { + serial4 = &uart5; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory { + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@bf000000 { + no-map; + reg = <0xbf000000 0x01000000>; /* 16M */ + }; + }; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + use-ncsi; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; +}; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index 22dee5937d5c..0b4932cc02a8 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -41,6 +41,22 @@ reg = <0x1e6c0080 0x80>; }; + mac0: ethernet@1e660000 { + compatible = "faraday,ftgmac100"; + reg = <0x1e660000 0x180>; + interrupts = <2>; + no-hw-checksum; + status = "disabled"; + }; + + mac1: ethernet@1e680000 { + compatible = "faraday,ftgmac100"; + reg = <0x1e680000 0x180>; + interrupts = <3>; + no-hw-checksum; + status = "disabled"; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; @@ -54,6 +70,756 @@ clocks = <&clk_clkin>; }; + syscon: syscon@1e6e2000 { + compatible = "aspeed,g4-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1a8>; + + pinctrl: pinctrl { + compatible = "aspeed,g4-pinctrl"; + + pinctrl_acpi_default: acpi_default { + function = "ACPI"; + groups = "ACPI"; + }; + + pinctrl_adc0_default: adc0_default { + function = "ADC0"; + groups = "ADC0"; + }; + + pinctrl_adc1_default: adc1_default { + function = "ADC1"; + groups = "ADC1"; + }; + + pinctrl_adc10_default: adc10_default { + function = "ADC10"; + groups = "ADC10"; + }; + + pinctrl_adc11_default: adc11_default { + function = "ADC11"; + groups = "ADC11"; + }; + + pinctrl_adc12_default: adc12_default { + function = "ADC12"; + groups = "ADC12"; + }; + + pinctrl_adc13_default: adc13_default { + function = "ADC13"; + groups = "ADC13"; + }; + + pinctrl_adc14_default: adc14_default { + function = "ADC14"; + groups = "ADC14"; + }; + + pinctrl_adc15_default: adc15_default { + function = "ADC15"; + groups = "ADC15"; + }; + + pinctrl_adc2_default: adc2_default { + function = "ADC2"; + groups = "ADC2"; + }; + + pinctrl_adc3_default: adc3_default { + function = "ADC3"; + groups = "ADC3"; + }; + + pinctrl_adc4_default: adc4_default { + function = "ADC4"; + groups = "ADC4"; + }; + + pinctrl_adc5_default: adc5_default { + function = "ADC5"; + groups = "ADC5"; + }; + + pinctrl_adc6_default: adc6_default { + function = "ADC6"; + groups = "ADC6"; + }; + + pinctrl_adc7_default: adc7_default { + function = "ADC7"; + groups = "ADC7"; + }; + + pinctrl_adc8_default: adc8_default { + function = "ADC8"; + groups = "ADC8"; + }; + + pinctrl_adc9_default: adc9_default { + function = "ADC9"; + groups = "ADC9"; + }; + + pinctrl_bmcint_default: bmcint_default { + function = "BMCINT"; + groups = "BMCINT"; + }; + + pinctrl_ddcclk_default: ddcclk_default { + function = "DDCCLK"; + groups = "DDCCLK"; + }; + + pinctrl_ddcdat_default: ddcdat_default { + function = "DDCDAT"; + groups = "DDCDAT"; + }; + + pinctrl_extrst_default: extrst_default { + function = "EXTRST"; + groups = "EXTRST"; + }; + + pinctrl_flack_default: flack_default { + function = "FLACK"; + groups = "FLACK"; + }; + + pinctrl_flbusy_default: flbusy_default { + function = "FLBUSY"; + groups = "FLBUSY"; + }; + + pinctrl_flwp_default: flwp_default { + function = "FLWP"; + groups = "FLWP"; + }; + + pinctrl_gpid_default: gpid_default { + function = "GPID"; + groups = "GPID"; + }; + + pinctrl_gpid0_default: gpid0_default { + function = "GPID0"; + groups = "GPID0"; + }; + + pinctrl_gpid2_default: gpid2_default { + function = "GPID2"; + groups = "GPID2"; + }; + + pinctrl_gpid4_default: gpid4_default { + function = "GPID4"; + groups = "GPID4"; + }; + + pinctrl_gpid6_default: gpid6_default { + function = "GPID6"; + groups = "GPID6"; + }; + + pinctrl_gpie0_default: gpie0_default { + function = "GPIE0"; + groups = "GPIE0"; + }; + + pinctrl_gpie2_default: gpie2_default { + function = "GPIE2"; + groups = "GPIE2"; + }; + + pinctrl_gpie4_default: gpie4_default { + function = "GPIE4"; + groups = "GPIE4"; + }; + + pinctrl_gpie6_default: gpie6_default { + function = "GPIE6"; + groups = "GPIE6"; + }; + + pinctrl_i2c10_default: i2c10_default { + function = "I2C10"; + groups = "I2C10"; + }; + + pinctrl_i2c11_default: i2c11_default { + function = "I2C11"; + groups = "I2C11"; + }; + + pinctrl_i2c12_default: i2c12_default { + function = "I2C12"; + groups = "I2C12"; + }; + + pinctrl_i2c13_default: i2c13_default { + function = "I2C13"; + groups = "I2C13"; + }; + + pinctrl_i2c14_default: i2c14_default { + function = "I2C14"; + groups = "I2C14"; + }; + + pinctrl_i2c3_default: i2c3_default { + function = "I2C3"; + groups = "I2C3"; + }; + + pinctrl_i2c4_default: i2c4_default { + function = "I2C4"; + groups = "I2C4"; + }; + + pinctrl_i2c5_default: i2c5_default { + function = "I2C5"; + groups = "I2C5"; + }; + + pinctrl_i2c6_default: i2c6_default { + function = "I2C6"; + groups = "I2C6"; + }; + + pinctrl_i2c7_default: i2c7_default { + function = "I2C7"; + groups = "I2C7"; + }; + + pinctrl_i2c8_default: i2c8_default { + function = "I2C8"; + groups = "I2C8"; + }; + + pinctrl_i2c9_default: i2c9_default { + function = "I2C9"; + groups = "I2C9"; + }; + + pinctrl_lpcpd_default: lpcpd_default { + function = "LPCPD"; + groups = "LPCPD"; + }; + + pinctrl_lpcpme_default: lpcpme_default { + function = "LPCPME"; + groups = "LPCPME"; + }; + + pinctrl_lpcrst_default: lpcrst_default { + function = "LPCRST"; + groups = "LPCRST"; + }; + + pinctrl_lpcsmi_default: lpcsmi_default { + function = "LPCSMI"; + groups = "LPCSMI"; + }; + + pinctrl_mac1link_default: mac1link_default { + function = "MAC1LINK"; + groups = "MAC1LINK"; + }; + + pinctrl_mac2link_default: mac2link_default { + function = "MAC2LINK"; + groups = "MAC2LINK"; + }; + + pinctrl_mdio1_default: mdio1_default { + function = "MDIO1"; + groups = "MDIO1"; + }; + + pinctrl_mdio2_default: mdio2_default { + function = "MDIO2"; + groups = "MDIO2"; + }; + + pinctrl_ncts1_default: ncts1_default { + function = "NCTS1"; + groups = "NCTS1"; + }; + + pinctrl_ncts2_default: ncts2_default { + function = "NCTS2"; + groups = "NCTS2"; + }; + + pinctrl_ncts3_default: ncts3_default { + function = "NCTS3"; + groups = "NCTS3"; + }; + + pinctrl_ncts4_default: ncts4_default { + function = "NCTS4"; + groups = "NCTS4"; + }; + + pinctrl_ndcd1_default: ndcd1_default { + function = "NDCD1"; + groups = "NDCD1"; + }; + + pinctrl_ndcd2_default: ndcd2_default { + function = "NDCD2"; + groups = "NDCD2"; + }; + + pinctrl_ndcd3_default: ndcd3_default { + function = "NDCD3"; + groups = "NDCD3"; + }; + + pinctrl_ndcd4_default: ndcd4_default { + function = "NDCD4"; + groups = "NDCD4"; + }; + + pinctrl_ndsr1_default: ndsr1_default { + function = "NDSR1"; + groups = "NDSR1"; + }; + + pinctrl_ndsr2_default: ndsr2_default { + function = "NDSR2"; + groups = "NDSR2"; + }; + + pinctrl_ndsr3_default: ndsr3_default { + function = "NDSR3"; + groups = "NDSR3"; + }; + + pinctrl_ndsr4_default: ndsr4_default { + function = "NDSR4"; + groups = "NDSR4"; + }; + + pinctrl_ndtr1_default: ndtr1_default { + function = "NDTR1"; + groups = "NDTR1"; + }; + + pinctrl_ndtr2_default: ndtr2_default { + function = "NDTR2"; + groups = "NDTR2"; + }; + + pinctrl_ndtr3_default: ndtr3_default { + function = "NDTR3"; + groups = "NDTR3"; + }; + + pinctrl_ndtr4_default: ndtr4_default { + function = "NDTR4"; + groups = "NDTR4"; + }; + + pinctrl_ndts4_default: ndts4_default { + function = "NDTS4"; + groups = "NDTS4"; + }; + + pinctrl_nri1_default: nri1_default { + function = "NRI1"; + groups = "NRI1"; + }; + + pinctrl_nri2_default: nri2_default { + function = "NRI2"; + groups = "NRI2"; + }; + + pinctrl_nri3_default: nri3_default { + function = "NRI3"; + groups = "NRI3"; + }; + + pinctrl_nri4_default: nri4_default { + function = "NRI4"; + groups = "NRI4"; + }; + + pinctrl_nrts1_default: nrts1_default { + function = "NRTS1"; + groups = "NRTS1"; + }; + + pinctrl_nrts2_default: nrts2_default { + function = "NRTS2"; + groups = "NRTS2"; + }; + + pinctrl_nrts3_default: nrts3_default { + function = "NRTS3"; + groups = "NRTS3"; + }; + + pinctrl_oscclk_default: oscclk_default { + function = "OSCCLK"; + groups = "OSCCLK"; + }; + + pinctrl_pwm0_default: pwm0_default { + function = "PWM0"; + groups = "PWM0"; + }; + + pinctrl_pwm1_default: pwm1_default { + function = "PWM1"; + groups = "PWM1"; + }; + + pinctrl_pwm2_default: pwm2_default { + function = "PWM2"; + groups = "PWM2"; + }; + + pinctrl_pwm3_default: pwm3_default { + function = "PWM3"; + groups = "PWM3"; + }; + + pinctrl_pwm4_default: pwm4_default { + function = "PWM4"; + groups = "PWM4"; + }; + + pinctrl_pwm5_default: pwm5_default { + function = "PWM5"; + groups = "PWM5"; + }; + + pinctrl_pwm6_default: pwm6_default { + function = "PWM6"; + groups = "PWM6"; + }; + + pinctrl_pwm7_default: pwm7_default { + function = "PWM7"; + groups = "PWM7"; + }; + + pinctrl_rgmii1_default: rgmii1_default { + function = "RGMII1"; + groups = "RGMII1"; + }; + + pinctrl_rgmii2_default: rgmii2_default { + function = "RGMII2"; + groups = "RGMII2"; + }; + + pinctrl_rmii1_default: rmii1_default { + function = "RMII1"; + groups = "RMII1"; + }; + + pinctrl_rmii2_default: rmii2_default { + function = "RMII2"; + groups = "RMII2"; + }; + + pinctrl_rom16_default: rom16_default { + function = "ROM16"; + groups = "ROM16"; + }; + + pinctrl_rom8_default: rom8_default { + function = "ROM8"; + groups = "ROM8"; + }; + + pinctrl_romcs1_default: romcs1_default { + function = "ROMCS1"; + groups = "ROMCS1"; + }; + + pinctrl_romcs2_default: romcs2_default { + function = "ROMCS2"; + groups = "ROMCS2"; + }; + + pinctrl_romcs3_default: romcs3_default { + function = "ROMCS3"; + groups = "ROMCS3"; + }; + + pinctrl_romcs4_default: romcs4_default { + function = "ROMCS4"; + groups = "ROMCS4"; + }; + + pinctrl_rxd1_default: rxd1_default { + function = "RXD1"; + groups = "RXD1"; + }; + + pinctrl_rxd2_default: rxd2_default { + function = "RXD2"; + groups = "RXD2"; + }; + + pinctrl_rxd3_default: rxd3_default { + function = "RXD3"; + groups = "RXD3"; + }; + + pinctrl_rxd4_default: rxd4_default { + function = "RXD4"; + groups = "RXD4"; + }; + + pinctrl_salt1_default: salt1_default { + function = "SALT1"; + groups = "SALT1"; + }; + + pinctrl_salt2_default: salt2_default { + function = "SALT2"; + groups = "SALT2"; + }; + + pinctrl_salt3_default: salt3_default { + function = "SALT3"; + groups = "SALT3"; + }; + + pinctrl_salt4_default: salt4_default { + function = "SALT4"; + groups = "SALT4"; + }; + + pinctrl_sd1_default: sd1_default { + function = "SD1"; + groups = "SD1"; + }; + + pinctrl_sd2_default: sd2_default { + function = "SD2"; + groups = "SD2"; + }; + + pinctrl_sgpmck_default: sgpmck_default { + function = "SGPMCK"; + groups = "SGPMCK"; + }; + + pinctrl_sgpmi_default: sgpmi_default { + function = "SGPMI"; + groups = "SGPMI"; + }; + + pinctrl_sgpmld_default: sgpmld_default { + function = "SGPMLD"; + groups = "SGPMLD"; + }; + + pinctrl_sgpmo_default: sgpmo_default { + function = "SGPMO"; + groups = "SGPMO"; + }; + + pinctrl_sgpsck_default: sgpsck_default { + function = "SGPSCK"; + groups = "SGPSCK"; + }; + + pinctrl_sgpsi0_default: sgpsi0_default { + function = "SGPSI0"; + groups = "SGPSI0"; + }; + + pinctrl_sgpsi1_default: sgpsi1_default { + function = "SGPSI1"; + groups = "SGPSI1"; + }; + + pinctrl_sgpsld_default: sgpsld_default { + function = "SGPSLD"; + groups = "SGPSLD"; + }; + + pinctrl_sioonctrl_default: sioonctrl_default { + function = "SIOONCTRL"; + groups = "SIOONCTRL"; + }; + + pinctrl_siopbi_default: siopbi_default { + function = "SIOPBI"; + groups = "SIOPBI"; + }; + + pinctrl_siopbo_default: siopbo_default { + function = "SIOPBO"; + groups = "SIOPBO"; + }; + + pinctrl_siopwreq_default: siopwreq_default { + function = "SIOPWREQ"; + groups = "SIOPWREQ"; + }; + + pinctrl_siopwrgd_default: siopwrgd_default { + function = "SIOPWRGD"; + groups = "SIOPWRGD"; + }; + + pinctrl_sios3_default: sios3_default { + function = "SIOS3"; + groups = "SIOS3"; + }; + + pinctrl_sios5_default: sios5_default { + function = "SIOS5"; + groups = "SIOS5"; + }; + + pinctrl_siosci_default: siosci_default { + function = "SIOSCI"; + groups = "SIOSCI"; + }; + + pinctrl_spi1_default: spi1_default { + function = "SPI1"; + groups = "SPI1"; + }; + + pinctrl_spi1debug_default: spi1debug_default { + function = "SPI1DEBUG"; + groups = "SPI1DEBUG"; + }; + + pinctrl_spi1passthru_default: spi1passthru_default { + function = "SPI1PASSTHRU"; + groups = "SPI1PASSTHRU"; + }; + + pinctrl_spics1_default: spics1_default { + function = "SPICS1"; + groups = "SPICS1"; + }; + + pinctrl_timer3_default: timer3_default { + function = "TIMER3"; + groups = "TIMER3"; + }; + + pinctrl_timer4_default: timer4_default { + function = "TIMER4"; + groups = "TIMER4"; + }; + + pinctrl_timer5_default: timer5_default { + function = "TIMER5"; + groups = "TIMER5"; + }; + + pinctrl_timer6_default: timer6_default { + function = "TIMER6"; + groups = "TIMER6"; + }; + + pinctrl_timer7_default: timer7_default { + function = "TIMER7"; + groups = "TIMER7"; + }; + + pinctrl_timer8_default: timer8_default { + function = "TIMER8"; + groups = "TIMER8"; + }; + + pinctrl_txd1_default: txd1_default { + function = "TXD1"; + groups = "TXD1"; + }; + + pinctrl_txd2_default: txd2_default { + function = "TXD2"; + groups = "TXD2"; + }; + + pinctrl_txd3_default: txd3_default { + function = "TXD3"; + groups = "TXD3"; + }; + + pinctrl_txd4_default: txd4_default { + function = "TXD4"; + groups = "TXD4"; + }; + + pinctrl_uart6_default: uart6_default { + function = "UART6"; + groups = "UART6"; + }; + + pinctrl_usbcki_default: usbcki_default { + function = "USBCKI"; + groups = "USBCKI"; + }; + + pinctrl_vgabios_rom_default: vgabios_rom_default { + function = "VGABIOS_ROM"; + groups = "VGABIOS_ROM"; + }; + + pinctrl_vgahs_default: vgahs_default { + function = "VGAHS"; + groups = "VGAHS"; + }; + + pinctrl_vgavs_default: vgavs_default { + function = "VGAVS"; + groups = "VGAVS"; + }; + + pinctrl_vpi18_default: vpi18_default { + function = "VPI18"; + groups = "VPI18"; + }; + + pinctrl_vpi24_default: vpi24_default { + function = "VPI24"; + groups = "VPI24"; + }; + + pinctrl_vpi30_default: vpi30_default { + function = "VPI30"; + groups = "VPI30"; + }; + + pinctrl_vpo12_default: vpo12_default { + function = "VPO12"; + groups = "VPO12"; + }; + + pinctrl_vpo24_default: vpo24_default { + function = "VPO24"; + groups = "VPO24"; + }; + + pinctrl_wdtrst1_default: wdtrst1_default { + function = "WDTRST1"; + groups = "WDTRST1"; + }; + + pinctrl_wdtrst2_default: wdtrst2_default { + function = "WDTRST2"; + groups = "WDTRST2"; + }; + + }; + }; + clk_apb: clk_apb@1e6e2008 { #clock-cells = <0>; compatible = "aspeed,g4-apb-clock"; @@ -72,6 +838,16 @@ reg = <0x1e720000 0x8000>; // 32K }; + gpio: gpio@1e780000 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2400-gpio"; + reg = <0x1e780000 0x1000>; + interrupts = <20>; + gpio-ranges = <&pinctrl 0 0 220>; + interrupt-controller; + }; + timer: timer@1e782000 { compatible = "aspeed,ast2400-timer"; reg = <0x1e782000 0x90>; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index dd94d9361fda..b664fe380936 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -32,6 +32,22 @@ reg = <0x1e6c0080 0x80>; }; + mac0: ethernet@1e660000 { + compatible = "faraday,ftgmac100"; + reg = <0x1e660000 0x180>; + interrupts = <2>; + no-hw-checksum; + status = "disabled"; + }; + + mac1: ethernet@1e680000 { + compatible = "faraday,ftgmac100"; + reg = <0x1e680000 0x180>; + interrupts = <3>; + no-hw-checksum; + status = "disabled"; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; @@ -44,6 +60,822 @@ reg = <0x1e6e2070 0x04>; }; + syscon: syscon@1e6e2000 { + compatible = "aspeed,g5-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1a8>; + + pinctrl: pinctrl { + compatible = "aspeed,g5-pinctrl"; + aspeed,external-nodes = <&gfx &lhc>; + + pinctrl_acpi_default: acpi_default { + function = "ACPI"; + groups = "ACPI"; + }; + + pinctrl_adc0_default: adc0_default { + function = "ADC0"; + groups = "ADC0"; + }; + + pinctrl_adc1_default: adc1_default { + function = "ADC1"; + groups = "ADC1"; + }; + + pinctrl_adc10_default: adc10_default { + function = "ADC10"; + groups = "ADC10"; + }; + + pinctrl_adc11_default: adc11_default { + function = "ADC11"; + groups = "ADC11"; + }; + + pinctrl_adc12_default: adc12_default { + function = "ADC12"; + groups = "ADC12"; + }; + + pinctrl_adc13_default: adc13_default { + function = "ADC13"; + groups = "ADC13"; + }; + + pinctrl_adc14_default: adc14_default { + function = "ADC14"; + groups = "ADC14"; + }; + + pinctrl_adc15_default: adc15_default { + function = "ADC15"; + groups = "ADC15"; + }; + + pinctrl_adc2_default: adc2_default { + function = "ADC2"; + groups = "ADC2"; + }; + + pinctrl_adc3_default: adc3_default { + function = "ADC3"; + groups = "ADC3"; + }; + + pinctrl_adc4_default: adc4_default { + function = "ADC4"; + groups = "ADC4"; + }; + + pinctrl_adc5_default: adc5_default { + function = "ADC5"; + groups = "ADC5"; + }; + + pinctrl_adc6_default: adc6_default { + function = "ADC6"; + groups = "ADC6"; + }; + + pinctrl_adc7_default: adc7_default { + function = "ADC7"; + groups = "ADC7"; + }; + + pinctrl_adc8_default: adc8_default { + function = "ADC8"; + groups = "ADC8"; + }; + + pinctrl_adc9_default: adc9_default { + function = "ADC9"; + groups = "ADC9"; + }; + + pinctrl_bmcint_default: bmcint_default { + function = "BMCINT"; + groups = "BMCINT"; + }; + + pinctrl_ddcclk_default: ddcclk_default { + function = "DDCCLK"; + groups = "DDCCLK"; + }; + + pinctrl_ddcdat_default: ddcdat_default { + function = "DDCDAT"; + groups = "DDCDAT"; + }; + + pinctrl_espi_default: espi_default { + function = "ESPI"; + groups = "ESPI"; + }; + + pinctrl_fwspics1_default: fwspics1_default { + function = "FWSPICS1"; + groups = "FWSPICS1"; + }; + + pinctrl_fwspics2_default: fwspics2_default { + function = "FWSPICS2"; + groups = "FWSPICS2"; + }; + + pinctrl_gpid0_default: gpid0_default { + function = "GPID0"; + groups = "GPID0"; + }; + + pinctrl_gpid2_default: gpid2_default { + function = "GPID2"; + groups = "GPID2"; + }; + + pinctrl_gpid4_default: gpid4_default { + function = "GPID4"; + groups = "GPID4"; + }; + + pinctrl_gpid6_default: gpid6_default { + function = "GPID6"; + groups = "GPID6"; + }; + + pinctrl_gpie0_default: gpie0_default { + function = "GPIE0"; + groups = "GPIE0"; + }; + + pinctrl_gpie2_default: gpie2_default { + function = "GPIE2"; + groups = "GPIE2"; + }; + + pinctrl_gpie4_default: gpie4_default { + function = "GPIE4"; + groups = "GPIE4"; + }; + + pinctrl_gpie6_default: gpie6_default { + function = "GPIE6"; + groups = "GPIE6"; + }; + + pinctrl_i2c10_default: i2c10_default { + function = "I2C10"; + groups = "I2C10"; + }; + + pinctrl_i2c11_default: i2c11_default { + function = "I2C11"; + groups = "I2C11"; + }; + + pinctrl_i2c12_default: i2c12_default { + function = "I2C12"; + groups = "I2C12"; + }; + + pinctrl_i2c13_default: i2c13_default { + function = "I2C13"; + groups = "I2C13"; + }; + + pinctrl_i2c14_default: i2c14_default { + function = "I2C14"; + groups = "I2C14"; + }; + + pinctrl_i2c3_default: i2c3_default { + function = "I2C3"; + groups = "I2C3"; + }; + + pinctrl_i2c4_default: i2c4_default { + function = "I2C4"; + groups = "I2C4"; + }; + + pinctrl_i2c5_default: i2c5_default { + function = "I2C5"; + groups = "I2C5"; + }; + + pinctrl_i2c6_default: i2c6_default { + function = "I2C6"; + groups = "I2C6"; + }; + + pinctrl_i2c7_default: i2c7_default { + function = "I2C7"; + groups = "I2C7"; + }; + + pinctrl_i2c8_default: i2c8_default { + function = "I2C8"; + groups = "I2C8"; + }; + + pinctrl_i2c9_default: i2c9_default { + function = "I2C9"; + groups = "I2C9"; + }; + + pinctrl_lad0_default: lad0_default { + function = "LAD0"; + groups = "LAD0"; + }; + + pinctrl_lad1_default: lad1_default { + function = "LAD1"; + groups = "LAD1"; + }; + + pinctrl_lad2_default: lad2_default { + function = "LAD2"; + groups = "LAD2"; + }; + + pinctrl_lad3_default: lad3_default { + function = "LAD3"; + groups = "LAD3"; + }; + + pinctrl_lclk_default: lclk_default { + function = "LCLK"; + groups = "LCLK"; + }; + + pinctrl_lframe_default: lframe_default { + function = "LFRAME"; + groups = "LFRAME"; + }; + + pinctrl_lpchc_default: lpchc_default { + function = "LPCHC"; + groups = "LPCHC"; + }; + + pinctrl_lpcpd_default: lpcpd_default { + function = "LPCPD"; + groups = "LPCPD"; + }; + + pinctrl_lpcplus_default: lpcplus_default { + function = "LPCPLUS"; + groups = "LPCPLUS"; + }; + + pinctrl_lpcpme_default: lpcpme_default { + function = "LPCPME"; + groups = "LPCPME"; + }; + + pinctrl_lpcrst_default: lpcrst_default { + function = "LPCRST"; + groups = "LPCRST"; + }; + + pinctrl_lpcsmi_default: lpcsmi_default { + function = "LPCSMI"; + groups = "LPCSMI"; + }; + + pinctrl_lsirq_default: lsirq_default { + function = "LSIRQ"; + groups = "LSIRQ"; + }; + + pinctrl_mac1link_default: mac1link_default { + function = "MAC1LINK"; + groups = "MAC1LINK"; + }; + + pinctrl_mac2link_default: mac2link_default { + function = "MAC2LINK"; + groups = "MAC2LINK"; + }; + + pinctrl_mdio1_default: mdio1_default { + function = "MDIO1"; + groups = "MDIO1"; + }; + + pinctrl_mdio2_default: mdio2_default { + function = "MDIO2"; + groups = "MDIO2"; + }; + + pinctrl_ncts1_default: ncts1_default { + function = "NCTS1"; + groups = "NCTS1"; + }; + + pinctrl_ncts2_default: ncts2_default { + function = "NCTS2"; + groups = "NCTS2"; + }; + + pinctrl_ncts3_default: ncts3_default { + function = "NCTS3"; + groups = "NCTS3"; + }; + + pinctrl_ncts4_default: ncts4_default { + function = "NCTS4"; + groups = "NCTS4"; + }; + + pinctrl_ndcd1_default: ndcd1_default { + function = "NDCD1"; + groups = "NDCD1"; + }; + + pinctrl_ndcd2_default: ndcd2_default { + function = "NDCD2"; + groups = "NDCD2"; + }; + + pinctrl_ndcd3_default: ndcd3_default { + function = "NDCD3"; + groups = "NDCD3"; + }; + + pinctrl_ndcd4_default: ndcd4_default { + function = "NDCD4"; + groups = "NDCD4"; + }; + + pinctrl_ndsr1_default: ndsr1_default { + function = "NDSR1"; + groups = "NDSR1"; + }; + + pinctrl_ndsr2_default: ndsr2_default { + function = "NDSR2"; + groups = "NDSR2"; + }; + + pinctrl_ndsr3_default: ndsr3_default { + function = "NDSR3"; + groups = "NDSR3"; + }; + + pinctrl_ndsr4_default: ndsr4_default { + function = "NDSR4"; + groups = "NDSR4"; + }; + + pinctrl_ndtr1_default: ndtr1_default { + function = "NDTR1"; + groups = "NDTR1"; + }; + + pinctrl_ndtr2_default: ndtr2_default { + function = "NDTR2"; + groups = "NDTR2"; + }; + + pinctrl_ndtr3_default: ndtr3_default { + function = "NDTR3"; + groups = "NDTR3"; + }; + + pinctrl_ndtr4_default: ndtr4_default { + function = "NDTR4"; + groups = "NDTR4"; + }; + + pinctrl_nri1_default: nri1_default { + function = "NRI1"; + groups = "NRI1"; + }; + + pinctrl_nri2_default: nri2_default { + function = "NRI2"; + groups = "NRI2"; + }; + + pinctrl_nri3_default: nri3_default { + function = "NRI3"; + groups = "NRI3"; + }; + + pinctrl_nri4_default: nri4_default { + function = "NRI4"; + groups = "NRI4"; + }; + + pinctrl_nrts1_default: nrts1_default { + function = "NRTS1"; + groups = "NRTS1"; + }; + + pinctrl_nrts2_default: nrts2_default { + function = "NRTS2"; + groups = "NRTS2"; + }; + + pinctrl_nrts3_default: nrts3_default { + function = "NRTS3"; + groups = "NRTS3"; + }; + + pinctrl_nrts4_default: nrts4_default { + function = "NRTS4"; + groups = "NRTS4"; + }; + + pinctrl_oscclk_default: oscclk_default { + function = "OSCCLK"; + groups = "OSCCLK"; + }; + + pinctrl_pewake_default: pewake_default { + function = "PEWAKE"; + groups = "PEWAKE"; + }; + + pinctrl_pnor_default: pnor_default { + function = "PNOR"; + groups = "PNOR"; + }; + + pinctrl_pwm0_default: pwm0_default { + function = "PWM0"; + groups = "PWM0"; + }; + + pinctrl_pwm1_default: pwm1_default { + function = "PWM1"; + groups = "PWM1"; + }; + + pinctrl_pwm2_default: pwm2_default { + function = "PWM2"; + groups = "PWM2"; + }; + + pinctrl_pwm3_default: pwm3_default { + function = "PWM3"; + groups = "PWM3"; + }; + + pinctrl_pwm4_default: pwm4_default { + function = "PWM4"; + groups = "PWM4"; + }; + + pinctrl_pwm5_default: pwm5_default { + function = "PWM5"; + groups = "PWM5"; + }; + + pinctrl_pwm6_default: pwm6_default { + function = "PWM6"; + groups = "PWM6"; + }; + + pinctrl_pwm7_default: pwm7_default { + function = "PWM7"; + groups = "PWM7"; + }; + + pinctrl_rgmii1_default: rgmii1_default { + function = "RGMII1"; + groups = "RGMII1"; + }; + + pinctrl_rgmii2_default: rgmii2_default { + function = "RGMII2"; + groups = "RGMII2"; + }; + + pinctrl_rmii1_default: rmii1_default { + function = "RMII1"; + groups = "RMII1"; + }; + + pinctrl_rmii2_default: rmii2_default { + function = "RMII2"; + groups = "RMII2"; + }; + + pinctrl_rxd1_default: rxd1_default { + function = "RXD1"; + groups = "RXD1"; + }; + + pinctrl_rxd2_default: rxd2_default { + function = "RXD2"; + groups = "RXD2"; + }; + + pinctrl_rxd3_default: rxd3_default { + function = "RXD3"; + groups = "RXD3"; + }; + + pinctrl_rxd4_default: rxd4_default { + function = "RXD4"; + groups = "RXD4"; + }; + + pinctrl_salt1_default: salt1_default { + function = "SALT1"; + groups = "SALT1"; + }; + + pinctrl_salt10_default: salt10_default { + function = "SALT10"; + groups = "SALT10"; + }; + + pinctrl_salt11_default: salt11_default { + function = "SALT11"; + groups = "SALT11"; + }; + + pinctrl_salt12_default: salt12_default { + function = "SALT12"; + groups = "SALT12"; + }; + + pinctrl_salt13_default: salt13_default { + function = "SALT13"; + groups = "SALT13"; + }; + + pinctrl_salt14_default: salt14_default { + function = "SALT14"; + groups = "SALT14"; + }; + + pinctrl_salt2_default: salt2_default { + function = "SALT2"; + groups = "SALT2"; + }; + + pinctrl_salt3_default: salt3_default { + function = "SALT3"; + groups = "SALT3"; + }; + + pinctrl_salt4_default: salt4_default { + function = "SALT4"; + groups = "SALT4"; + }; + + pinctrl_salt5_default: salt5_default { + function = "SALT5"; + groups = "SALT5"; + }; + + pinctrl_salt6_default: salt6_default { + function = "SALT6"; + groups = "SALT6"; + }; + + pinctrl_salt7_default: salt7_default { + function = "SALT7"; + groups = "SALT7"; + }; + + pinctrl_salt8_default: salt8_default { + function = "SALT8"; + groups = "SALT8"; + }; + + pinctrl_salt9_default: salt9_default { + function = "SALT9"; + groups = "SALT9"; + }; + + pinctrl_scl1_default: scl1_default { + function = "SCL1"; + groups = "SCL1"; + }; + + pinctrl_scl2_default: scl2_default { + function = "SCL2"; + groups = "SCL2"; + }; + + pinctrl_sd1_default: sd1_default { + function = "SD1"; + groups = "SD1"; + }; + + pinctrl_sd2_default: sd2_default { + function = "SD2"; + groups = "SD2"; + }; + + pinctrl_sda1_default: sda1_default { + function = "SDA1"; + groups = "SDA1"; + }; + + pinctrl_sda2_default: sda2_default { + function = "SDA2"; + groups = "SDA2"; + }; + + pinctrl_sgps1_default: sgps1_default { + function = "SGPS1"; + groups = "SGPS1"; + }; + + pinctrl_sgps2_default: sgps2_default { + function = "SGPS2"; + groups = "SGPS2"; + }; + + pinctrl_sioonctrl_default: sioonctrl_default { + function = "SIOONCTRL"; + groups = "SIOONCTRL"; + }; + + pinctrl_siopbi_default: siopbi_default { + function = "SIOPBI"; + groups = "SIOPBI"; + }; + + pinctrl_siopbo_default: siopbo_default { + function = "SIOPBO"; + groups = "SIOPBO"; + }; + + pinctrl_siopwreq_default: siopwreq_default { + function = "SIOPWREQ"; + groups = "SIOPWREQ"; + }; + + pinctrl_siopwrgd_default: siopwrgd_default { + function = "SIOPWRGD"; + groups = "SIOPWRGD"; + }; + + pinctrl_sios3_default: sios3_default { + function = "SIOS3"; + groups = "SIOS3"; + }; + + pinctrl_sios5_default: sios5_default { + function = "SIOS5"; + groups = "SIOS5"; + }; + + pinctrl_siosci_default: siosci_default { + function = "SIOSCI"; + groups = "SIOSCI"; + }; + + pinctrl_spi1_default: spi1_default { + function = "SPI1"; + groups = "SPI1"; + }; + + pinctrl_spi1cs1_default: spi1cs1_default { + function = "SPI1CS1"; + groups = "SPI1CS1"; + }; + + pinctrl_spi1debug_default: spi1debug_default { + function = "SPI1DEBUG"; + groups = "SPI1DEBUG"; + }; + + pinctrl_spi1passthru_default: spi1passthru_default { + function = "SPI1PASSTHRU"; + groups = "SPI1PASSTHRU"; + }; + + pinctrl_spi2ck_default: spi2ck_default { + function = "SPI2CK"; + groups = "SPI2CK"; + }; + + pinctrl_spi2cs0_default: spi2cs0_default { + function = "SPI2CS0"; + groups = "SPI2CS0"; + }; + + pinctrl_spi2cs1_default: spi2cs1_default { + function = "SPI2CS1"; + groups = "SPI2CS1"; + }; + + pinctrl_spi2miso_default: spi2miso_default { + function = "SPI2MISO"; + groups = "SPI2MISO"; + }; + + pinctrl_spi2mosi_default: spi2mosi_default { + function = "SPI2MOSI"; + groups = "SPI2MOSI"; + }; + + pinctrl_timer3_default: timer3_default { + function = "TIMER3"; + groups = "TIMER3"; + }; + + pinctrl_timer4_default: timer4_default { + function = "TIMER4"; + groups = "TIMER4"; + }; + + pinctrl_timer5_default: timer5_default { + function = "TIMER5"; + groups = "TIMER5"; + }; + + pinctrl_timer6_default: timer6_default { + function = "TIMER6"; + groups = "TIMER6"; + }; + + pinctrl_timer7_default: timer7_default { + function = "TIMER7"; + groups = "TIMER7"; + }; + + pinctrl_timer8_default: timer8_default { + function = "TIMER8"; + groups = "TIMER8"; + }; + + pinctrl_txd1_default: txd1_default { + function = "TXD1"; + groups = "TXD1"; + }; + + pinctrl_txd2_default: txd2_default { + function = "TXD2"; + groups = "TXD2"; + }; + + pinctrl_txd3_default: txd3_default { + function = "TXD3"; + groups = "TXD3"; + }; + + pinctrl_txd4_default: txd4_default { + function = "TXD4"; + groups = "TXD4"; + }; + + pinctrl_uart6_default: uart6_default { + function = "UART6"; + groups = "UART6"; + }; + + pinctrl_usbcki_default: usbcki_default { + function = "USBCKI"; + groups = "USBCKI"; + }; + + pinctrl_vgabiosrom_default: vgabiosrom_default { + function = "VGABIOSROM"; + groups = "VGABIOSROM"; + }; + + pinctrl_vgahs_default: vgahs_default { + function = "VGAHS"; + groups = "VGAHS"; + }; + + pinctrl_vgavs_default: vgavs_default { + function = "VGAVS"; + groups = "VGAVS"; + }; + + pinctrl_vpi24_default: vpi24_default { + function = "VPI24"; + groups = "VPI24"; + }; + + pinctrl_vpo_default: vpo_default { + function = "VPO"; + groups = "VPO"; + }; + + pinctrl_wdtrst1_default: wdtrst1_default { + function = "WDTRST1"; + groups = "WDTRST1"; + }; + + pinctrl_wdtrst2_default: wdtrst2_default { + function = "WDTRST2"; + groups = "WDTRST2"; + }; + + }; + }; + clk_hpll: clk_hpll@1e6e2024 { #clock-cells = <0>; compatible = "aspeed,g5-hpll-clock"; @@ -71,11 +903,27 @@ reg = <0x1e6e202c 0x4>; }; + gfx: display@1e6e6000 { + compatible = "aspeed,ast2500-gfx", "syscon"; + reg = <0x1e6e6000 0x1000>; + reg-io-width = <4>; + }; + sram@1e720000 { compatible = "mmio-sram"; reg = <0x1e720000 0x9000>; // 36K }; + gpio: gpio@1e780000 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2500-gpio"; + reg = <0x1e780000 0x1000>; + interrupts = <20>; + gpio-ranges = <&pinctrl 0 0 220>; + interrupt-controller; + }; + timer: timer@1e782000 { compatible = "aspeed,ast2400-timer"; reg = <0x1e782000 0x90>; @@ -86,6 +934,7 @@ clocks = <&clk_apb>; }; + wdt1: wdt@1e785000 { compatible = "aspeed,wdt"; reg = <0x1e785000 0x1c>; @@ -115,6 +964,36 @@ status = "disabled"; }; + lpc: lpc@1e789000 { + compatible = "aspeed,ast2500-lpc", "simple-mfd"; + reg = <0x1e789000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e789000 0x1000>; + + lpc_bmc: lpc-bmc@0 { + compatible = "aspeed,ast2500-lpc-bmc"; + reg = <0x0 0x80>; + }; + + lpc_host: lpc-host@80 { + compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"; + reg = <0x80 0x1e0>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x80 0x1e0>; + + reg-io-width = <4>; + + lhc: lhc@20 { + compatible = "aspeed,ast2500-lhc"; + reg = <0x20 0x24 0x48 0x8>; + }; + }; + }; + uart2: serial@1e78d000 { compatible = "ns16550a"; reg = <0x1e78d000 0x1000>; diff --git a/arch/arm/boot/dts/at91-linea.dtsi b/arch/arm/boot/dts/at91-linea.dtsi new file mode 100644 index 000000000000..0721c8472509 --- /dev/null +++ b/arch/arm/boot/dts/at91-linea.dtsi @@ -0,0 +1,49 @@ +/* + * at91-linea.dtsi - Device Tree Include file for the Axentia Linea Module. + * + * Copyright (C) 2017 Axentia Technologies AB + * + * Author: Peter Rosin <peda@axentia.se> + * + * Licensed under GPLv2 or later. + */ + +#include "sama5d31.dtsi" + +/ { + compatible = "axentia,linea", + "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; + + memory { + reg = <0x20000000 0x4000000>; + }; +}; + +&slow_xtal { + clock-frequency = <32768>; +}; + +&main_xtal { + clock-frequency = <12000000>; +}; + +&i2c0 { + status = "okay"; + + eeprom@51 { + compatible = "st,24c64"; + reg = <0x51>; + pagesize = <32>; + }; +}; + +&nand0 { + status = "okay"; + + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + atmel,has-pmecc; + atmel,pmecc-cap = <4>; + atmel,pmecc-sector-size = <512>; + nand-on-flash-bbt; +}; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 0b9a59d5fdac..9f7f8a7d8ff9 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -148,6 +148,8 @@ uart1: serial@f8020000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_default>; + atmel,use-dma-rx; + atmel,use-dma-tx; status = "okay"; }; @@ -256,6 +258,8 @@ }; uart3: serial@fc008000 { + atmel,use-dma-rx; + atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3_default>; status = "okay"; diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi index a92c6e0ca854..b5a5a91bc2ef 100644 --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi @@ -12,8 +12,8 @@ #include "sama5d4.dtsi" / { - model = "DENX MA5D4"; - compatible = "denx,ma5d4", "atmel,sama5d4", "atmel,sama5"; + model = "Aries/DENX MA5D4"; + compatible = "aries,ma5d4", "denx,ma5d4", "atmel,sama5d4", "atmel,sama5"; memory { reg = <0x20000000 0x10000000>; diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts index eac4ea2744cc..84be29f38dae 100644 --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts @@ -13,8 +13,8 @@ #include "at91-sama5d4_ma5d4.dtsi" / { - model = "DENX MA5D4EVK"; - compatible = "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5"; + model = "Aries/DENX MA5D4EVK"; + compatible = "aries,ma5d4evk", "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5"; chosen { stdout-path = "serial3:115200n8"; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index ed7fce297738..5ab14cedb1db 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -69,6 +69,12 @@ ahb { apb { + uart0: serial@f8004000 { + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; + }; + spi0: spi@f8010000 { cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; status = "okay"; @@ -110,6 +116,8 @@ }; usart3: serial@fc00c000 { + atmel,use-dma-rx; + atmel,use-dma-tx; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts new file mode 100644 index 000000000000..669a2c6bdefc --- /dev/null +++ b/arch/arm/boot/dts/at91-tse850-3.dts @@ -0,0 +1,274 @@ +/* + * at91-tse850-3.dts - Device Tree file for the Axentia TSE-850 3.0 board + * + * Copyright (C) 2017 Axentia Technologies AB + * + * Author: Peter Rosin <peda@axentia.se> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include <dt-bindings/pwm/pwm.h> +#include "at91-linea.dtsi" + +/ { + model = "Axentia TSE-850 3.0"; + compatible = "axentia,tse850v3", "axentia,linea", + "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + pinctrl@fffff200 { + tse850 { + pinctrl_usba_vbus: usba-vbus { + atmel,pins = + <AT91_PIOC 31 + AT91_PERIPH_GPIO + AT91_PINCTRL_DEGLITCH>; + }; + }; + }; + + watchdog@fffffe40 { + status = "okay"; + }; + }; + }; + + sck: oscillator { + compatible = "fixed-clock"; + + #clock-cells = <0>; + clock-frequency = <16000000>; + clock-output-names = "sck"; + }; + + reg_3v3: regulator { + compatible = "regulator-fixed"; + + regulator-name = "3v3-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ana: reg-ana { + compatible = "pwm-regulator"; + + regulator-name = "ANA"; + + pwms = <&pwm0 2 1000 PWM_POLARITY_INVERTED>; + pwm-dutycycle-unit = <1000>; + pwm-dutycycle-range = <100 1000>; + + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <20000000>; + regulator-ramp-delay = <1000>; + }; + + sound { + compatible = "axentia,tse850-pcm5142"; + + axentia,cpu-dai = <&ssc0>; + axentia,audio-codec = <&pcm5142>; + + axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>; + axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>; + axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>; + + axentia,ana-supply = <&ana>; + }; + + dac: dpot-dac { + compatible = "dpot-dac"; + vref-supply = <®_3v3>; + io-channels = <&dpot 0>; + io-channel-names = "dpot"; + #io-channel-cells = <1>; + }; + + envelope-detector { + compatible = "axentia,tse850-envelope-detector"; + io-channels = <&dac 0>; + io-channel-names = "dac"; + + interrupt-parent = <&pioA>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "comp"; + }; + + leds { + compatible = "gpio-leds"; + + ch1-red { + label = "ch-1:red"; + gpios = <&pioA 23 GPIO_ACTIVE_LOW>; + }; + ch1-green { + label = "ch-1:green"; + gpios = <&pioA 22 GPIO_ACTIVE_LOW>; + }; + ch2-red { + label = "ch-2:red"; + gpios = <&pioA 21 GPIO_ACTIVE_LOW>; + }; + ch2-green { + label = "ch-2:green"; + gpios = <&pioA 20 GPIO_ACTIVE_LOW>; + }; + data-red { + label = "data:red"; + gpios = <&pioA 19 GPIO_ACTIVE_LOW>; + }; + data-green { + label = "data:green"; + gpios = <&pioA 18 GPIO_ACTIVE_LOW>; + }; + alarm-red { + label = "alarm:red"; + gpios = <&pioA 17 GPIO_ACTIVE_LOW>; + }; + alarm-green { + label = "alarm:green"; + gpios = <&pioA 16 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&nand0 { + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + barebox@40000 { + label = "bootloader"; + reg = <0x40000 0x60000>; + }; + + bareboxenv@c0000 { + label = "bareboxenv"; + reg = <0xc0000 0x40000>; + }; + + bareboxenv2@100000 { + label = "bareboxenv2"; + reg = <0x100000 0x40000>; + }; + + oftree@180000 { + label = "oftree"; + reg = <0x180000 0x20000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x500000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + + ovlfs@10000000 { + label = "ovlfs"; + reg = <0x10000000 0x10000000>; + }; +}; + +&ssc0 { + #sound-dai-cells = <0>; + + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + jc42@18 { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; + reg = <0x18>; + }; + + dpot: mcp4651-104@28 { + compatible = "microchip,mcp4651-104"; + reg = <0x28>; + #io-channel-cells = <1>; + }; + + pcm5142: pcm5142@4c { + compatible = "ti,pcm5142"; + + reg = <0x4c>; + + AVDD-supply = <®_3v3>; + DVDD-supply = <®_3v3>; + CPVDD-supply = <®_3v3>; + + clocks = <&sck>; + + pll-in = <3>; + pll-out = <6>; + }; + + eeprom@50 { + compatible = "nxp,24c02"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&usart0 { + status = "okay"; + + atmel,use-dma-rx; +}; + +&pwm0 { + status = "okay"; + + pinctrl-0 = <&pinctrl_pwm0_pwml2_1>; + pinctrl-names = "default"; +}; + +&macb1 { + status = "okay"; + + phy-mode = "rgmii"; + + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@3 { + reg = <3>; + + interrupt-parent = <&pioE>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&usb0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + atmel,vbus-gpio = <&pioC 31 GPIO_ACTIVE_HIGH>; +}; + +&usb1 { + status = "okay"; + + num-ports = <1>; + atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>; + atmel,oc-gpio = <&pioC 15 GPIO_ACTIVE_LOW>; +}; + +&usb2 { + status = "okay"; +}; + +&dbgu { + status = "okay"; + + dmas = <0>, <0>; /* Do not use DMA for dbgu */ +}; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 4e913c2ccb79..f057e0b15a6f 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -481,8 +481,8 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A */ - AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA31 periph with pullup */ + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; }; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index a3e363d79122..9e035b21e1b6 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -412,8 +412,8 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */ - AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB15 periph with pullup */ + <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; }; diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts index 2c87f58448e7..b2578feceb08 100644 --- a/arch/arm/boot/dts/at91sam9260ek.dts +++ b/arch/arm/boot/dts/at91sam9260ek.dts @@ -174,14 +174,14 @@ label = "Button 3"; gpios = <&pioA 30 GPIO_ACTIVE_LOW>; linux,code = <0x103>; - gpio-key,wakeup; + wakeup-source; }; btn4 { label = "Button 4"; gpios = <&pioA 31 GPIO_ACTIVE_LOW>; linux,code = <0x104>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 32752d7883f1..3fe77c38bd0d 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -302,8 +302,8 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE>, - <AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index aeb1a36373f4..a1888f6d892b 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -412,8 +412,8 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC30 periph A */ - AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC31 periph with pullup */ + <AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index b3501ae2a3bd..e567d5fd3f9d 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -478,8 +478,8 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */ - AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB13 periph A */ + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 3b3eb3edcb47..f43d7695352d 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -500,8 +500,8 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */ - AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA10 periph with pullup */ + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; }; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 70adf940d98c..f4c129a98f17 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -438,8 +438,8 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>, - <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index ed4e4bd8a8f1..f66bae925705 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -460,8 +460,8 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */ - AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA10 periph A with pullup */ + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; }; diff --git a/arch/arm/boot/dts/axm55xx.dtsi b/arch/arm/boot/dts/axm55xx.dtsi index a9d6d593fc8a..47799f59faa5 100644 --- a/arch/arm/boot/dts/axm55xx.dtsi +++ b/arch/arm/boot/dts/axm55xx.dtsi @@ -62,7 +62,7 @@ #address-cells = <0>; interrupt-controller; reg = <0x20 0x01001000 0 0x1000>, - <0x20 0x01002000 0 0x1000>, + <0x20 0x01002000 0 0x2000>, <0x20 0x01004000 0 0x2000>, <0x20 0x01006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | diff --git a/arch/arm/boot/dts/axp223.dtsi b/arch/arm/boot/dts/axp223.dtsi new file mode 100644 index 000000000000..b91b6c1278c7 --- /dev/null +++ b/arch/arm/boot/dts/axp223.dtsi @@ -0,0 +1,58 @@ +/* + * Copyright 2016 Free Electrons + * + * Quentin Schulz <quentin.schulz@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * AXP223 Integrated Power Management Chip + * http://www.x-powers.com/product/AXP22X.php + * http://dl.linux-sunxi.org/AXP/AXP223-en.pdf + * + * The AXP223 shares most of its logic with the AXP221 but it has some + * differences, for the VBUS driver for example. + */ + +#include "axp22x.dtsi" + +&usb_power_supply { + compatible = "x-powers,axp223-usb-power-supply"; +}; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index fabc9f36c408..8833a4c3cd96 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -91,6 +91,13 @@ #address-cells = <1>; #size-cells = <1>; + otp: otp@0301c800 { + compatible = "brcm,ocotp"; + reg = <0x0301c800 0x2c>; + brcm,ocotp-size = <2048>; + status = "disabled"; + }; + pcie_phy: phy@0301d0a0 { compatible = "brcm,cygnus-pcie-phy"; reg = <0x0301d0a0 0x14>; @@ -108,12 +115,21 @@ }; }; - pinctrl: pinctrl@0x0301d0c8 { + pinctrl: pinctrl@0301d0c8 { compatible = "brcm,cygnus-pinmux"; reg = <0x0301d0c8 0x30>, <0x0301d24c 0x2c>; }; + mailbox: mailbox@03024024 { + compatible = "brcm,iproc-mailbox"; + reg = <0x03024024 0x40>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-controller; + #mbox-cells = <1>; + }; + gpio_crmu: gpio@03024800 { compatible = "brcm,cygnus-crmu-gpio"; reg = <0x03024800 0x50>, @@ -121,6 +137,9 @@ ngpios = <6>; #gpio-cells = <2>; gpio-controller; + interrupt-controller; + interrupt-parent = <&mailbox>; + interrupts = <0>; }; i2c0: i2c@18008000 { diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 7c9e0fae9bb9..832795b0fd0f 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -160,7 +160,7 @@ axi { compatible = "simple-bus"; - ranges = <0x00000000 0x18000000 0x0011ba08>; + ranges = <0x00000000 0x18000000 0x0011c40c>; #address-cells = <1>; #size-cells = <1>; @@ -209,6 +209,15 @@ #dma-cells = <1>; }; + sdio: sdhci@21000 { + compatible = "brcm,sdhci-iproc-cygnus"; + reg = <0x21000 0x100>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + sdhci,auto-cmd12; + clocks = <&lcpll0 BCM_NSP_LCPLL0_SDIO_CLK>; + status = "disabled"; + }; + amac0: ethernet@22000 { compatible = "brcm,nsp-amac"; reg = <0x022000 0x1000>, @@ -227,6 +236,15 @@ status = "disabled"; }; + amac2: ethernet@24000 { + compatible = "brcm,nsp-amac"; + reg = <0x024000 0x1000>, + <0x112000 0x1000>; + reg-names = "amac_base", "idm_base"; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + nand: nand@26000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x026000 0x600>, @@ -241,6 +259,45 @@ brcm,nand-has-wp; }; + qspi: qspi@27200 { + compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"; + reg = <0x027200 0x184>, + <0x027000 0x124>, + <0x11c408 0x004>, + <0x0273a0 0x01c>; + reg-names = "mspi", "bspi", "intr_regs", + "intr_status_reg"; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "spi_lr_fullness_reached", + "spi_lr_session_aborted", + "spi_lr_impatient", + "spi_lr_session_done", + "spi_lr_overhead", + "mspi_done", + "mspi_halted"; + clocks = <&iprocmed>; + clock-names = "iprocmed"; + num-cs = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + gpiob: gpio@30000 { + compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio"; + reg = <0x30000 0x50>; + #gpio-cells = <2>; + gpio-controller; + ngpios = <4>; + interrupt-controller; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + }; + pwm: pwm@31000 { compatible = "brcm,iproc-pwm"; reg = <0x31000 0x28>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts index f7f9db355d98..d0704540db6b 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts @@ -22,7 +22,72 @@ }; &gpio { - pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>; + /* + * This is based on the unreleased schematic for the Model A+. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "SDA0", + "SCL0", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD0", + "RXD0", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "SDA0", + "SCL0", + "NC", /* GPIO30 */ + "NC", /* GPIO31 */ + "CAM_GPIO1", /* GPIO32 */ + "NC", /* GPIO33 */ + "NC", /* GPIO34 */ + "PWR_LOW_N", /* GPIO35 */ + "NC", /* GPIO36 */ + "NC", /* GPIO37 */ + "USB_LIMIT", /* GPIO38 */ + "NC", /* GPIO39 */ + "PWM0_OUT", /* GPIO40 */ + "CAM_GPIO0", /* GPIO41 */ + "NC", /* GPIO42 */ + "NC", /* GPIO43 */ + "NC", /* GPIO44 */ + "PWM1_OUT", /* GPIO45 */ + "HDMI_HPD_N", + "STATUS_LED", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-0 = <&gpioout &alt0 &i2s_alt0>; /* I2S interface */ i2s_alt0: i2s_alt0 { diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts index 8be102f5d826..46d078e29017 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts @@ -15,7 +15,74 @@ }; &gpio { - pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>; + /* + * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf + * RPI00021 sheet 02 + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "SDA0", + "SCL0", + "SDA1", + "SCL1", + "GPIO_GCLK", + "CAM_GPIO1", + "LAN_RUN", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "NC", /* GPIO12 */ + "NC", /* GPIO13 */ + /* Serial port */ + "TXD0", + "RXD0", + "STATUS_LED_N", + "GPIO17", + "GPIO18", + "NC", /* GPIO19 */ + "NC", /* GPIO20 */ + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "NC", /* GPIO26 */ + "CAM_GPIO0", + /* Binary number representing build/revision */ + "CONFIG0", + "CONFIG1", + "CONFIG2", + "CONFIG3", + "NC", /* GPIO32 */ + "NC", /* GPIO33 */ + "NC", /* GPIO34 */ + "NC", /* GPIO35 */ + "NC", /* GPIO36 */ + "NC", /* GPIO37 */ + "NC", /* GPIO38 */ + "NC", /* GPIO39 */ + "PWM0_OUT", + "NC", /* GPIO41 */ + "NC", /* GPIO42 */ + "NC", /* GPIO43 */ + "NC", /* GPIO44 */ + "PWM1_OUT", + "HDMI_HPD_P", + "SD_CARD_DET", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-0 = <&gpioout &alt0 &i2s_alt2>; /* I2S interface */ i2s_alt2: i2s_alt2 { diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts index 35cde65c975e..432088ebb0a1 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts @@ -23,7 +23,73 @@ }; &gpio { - pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>; + /* + * Taken from Raspberry-Pi-B-Plus-V1.2-Schematics.pdf + * RPI-BPLUS sheet 1 + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "SDA0", + "SCL0", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD0", + "RXD0", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "SDA0", + "SCL0", + "NC", /* GPIO30 */ + "LAN_RUN", /* GPIO31 */ + "CAM_GPIO1", /* GPIO32 */ + "NC", /* GPIO33 */ + "NC", /* GPIO34 */ + "PWR_LOW_N", /* GPIO35 */ + "NC", /* GPIO36 */ + "NC", /* GPIO37 */ + "USB_LIMIT", /* GPIO38 */ + "NC", /* GPIO39 */ + "PWM0_OUT", /* GPIO40 */ + "CAM_GPIO0", /* GPIO41 */ + "NC", /* GPIO42 */ + "NC", /* GPIO43 */ + "ETHCLK", /* GPIO44 */ + "PWM1_OUT", /* GPIO45 */ + "HDMI_HPD_N", + "STATUS_LED", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-0 = <&gpioout &alt0 &i2s_alt0>; /* I2S interface */ i2s_alt0: i2s_alt0 { diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts index 84df85ea6296..4133bc2cd9be 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -16,7 +16,73 @@ }; &gpio { - pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>; + /* + * Taken from Raspberry-Pi-Rev-2.0-Model-AB-Schematics.pdf + * RPI00022 sheet 02 + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "SDA0", + "SCL0", + "SDA1", + "SCL1", + "GPIO_GCLK", + "CAM_CLK", + "LAN_RUN", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "NC", /* GPIO12 */ + "NC", /* GPIO13 */ + /* Serial port */ + "TXD0", + "RXD0", + "STATUS_LED_N", + "GPIO17", + "GPIO18", + "NC", /* GPIO19 */ + "NC", /* GPIO20 */ + "CAM_GPIO", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "NC", /* GPIO26 */ + "GPIO27", + "GPIO28", + "GPIO29", + "GPIO30", + "GPIO31", + "NC", /* GPIO32 */ + "NC", /* GPIO33 */ + "NC", /* GPIO34 */ + "NC", /* GPIO35 */ + "NC", /* GPIO36 */ + "NC", /* GPIO37 */ + "NC", /* GPIO38 */ + "NC", /* GPIO39 */ + "PWM0_OUT", + "NC", /* GPIO41 */ + "NC", /* GPIO42 */ + "NC", /* GPIO43 */ + "NC", /* GPIO44 */ + "PWM1_OUT", + "HDMI_HPD_P", + "SD_CARD_DET", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-0 = <&gpioout &alt0 &i2s_alt2>; /* I2S interface */ i2s_alt2: i2s_alt2 { diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 8e626a80fe24..4d56fe3006b0 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -16,7 +16,74 @@ }; &gpio { - pinctrl-0 = <&gpioout &alt0 &alt3>; + /* + * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf + * RPI00021 sheet 02 + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "SDA0", + "SCL0", + "SDA1", + "SCL1", + "GPIO_GCLK", + "CAM_GPIO1", + "LAN_RUN", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "NC", /* GPIO12 */ + "NC", /* GPIO13 */ + /* Serial port */ + "TXD0", + "RXD0", + "STATUS_LED_N", + "GPIO17", + "GPIO18", + "NC", /* GPIO19 */ + "NC", /* GPIO20 */ + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "NC", /* GPIO26 */ + "CAM_GPIO0", + /* Binary number representing build/revision */ + "CONFIG0", + "CONFIG1", + "CONFIG2", + "CONFIG3", + "NC", /* GPIO32 */ + "NC", /* GPIO33 */ + "NC", /* GPIO34 */ + "NC", /* GPIO35 */ + "NC", /* GPIO36 */ + "NC", /* GPIO37 */ + "NC", /* GPIO38 */ + "NC", /* GPIO39 */ + "PWM0_OUT", + "NC", /* GPIO41 */ + "NC", /* GPIO42 */ + "NC", /* GPIO43 */ + "NC", /* GPIO44 */ + "PWM1_OUT", + "HDMI_HPD_P", + "SD_CARD_DET", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-0 = <&gpioout &alt0>; }; &hdmi { diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts index 60e359fafc5b..cc8b832c4c78 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts @@ -26,7 +26,72 @@ }; &gpio { - pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>; + /* + * This is based on the official GPU firmware DT blob. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "SDA0", + "SCL0", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD0", + "RXD0", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "SDA0", + "SCL0", + "NC", /* GPIO30 */ + "NC", /* GPIO31 */ + "CAM_GPIO1", /* GPIO32 */ + "NC", /* GPIO33 */ + "NC", /* GPIO34 */ + "NC", /* GPIO35 */ + "NC", /* GPIO36 */ + "NC", /* GPIO37 */ + "NC", /* GPIO38 */ + "NC", /* GPIO39 */ + "NC", /* GPIO40 */ + "CAM_GPIO0", /* GPIO41 */ + "NC", /* GPIO42 */ + "NC", /* GPIO43 */ + "NC", /* GPIO44 */ + "NC", /* GPIO45 */ + "HDMI_HPD_N", + "STATUS_LED_N", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-0 = <&gpioout &alt0 &i2s_alt0>; /* I2S interface */ i2s_alt0: i2s_alt0 { diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index e9b47b2bbc33..38e6050035bc 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -39,22 +39,21 @@ }; alt0: alt0 { - brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>; + brcm,pins = <4 5 7 8 9 10 11 14 15>; brcm,function = <BCM2835_FSEL_ALT0>; }; - - alt3: alt3 { - brcm,pins = <48 49 50 51 52 53>; - brcm,function = <BCM2835_FSEL_ALT3>; - }; }; &i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_gpio0>; status = "okay"; clock-frequency = <100000>; }; &i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_gpio2>; status = "okay"; clock-frequency = <100000>; }; @@ -64,11 +63,15 @@ }; &sdhci { + pinctrl-names = "default"; + pinctrl-0 = <&emmc_gpio48>; status = "okay"; bus-width = <4>; }; &pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; status = "okay"; }; @@ -84,3 +87,8 @@ power-domains = <&power RPI_POWER_DOMAIN_HDMI>; status = "okay"; }; + +&vec { + power-domains = <&power RPI_POWER_DOMAIN_VEC>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index a78759e73710..0890d97e674d 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -23,3 +23,9 @@ }; }; }; + +/* enable thermal sensor with the correct compatible property set */ +&thermal { + compatible = "brcm,bcm2835-thermal"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts index 39dccf62ac96..bf19e8cfb9e6 100644 --- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts @@ -27,7 +27,7 @@ }; &gpio { - pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>; + pinctrl-0 = <&gpioout &alt0 &i2s_alt0>; /* I2S interface */ i2s_alt0: i2s_alt0 { diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi index 9d0651d8f373..519a44f5d25a 100644 --- a/arch/arm/boot/dts/bcm2836.dtsi +++ b/arch/arm/boot/dts/bcm2836.dtsi @@ -76,3 +76,9 @@ interrupt-parent = <&local_intc>; interrupts = <8>; }; + +/* enable thermal sensor with the correct compatible property set */ +&thermal { + compatible = "brcm,bcm2836-thermal"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 46d46d894a44..a3106aa446c6 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -104,7 +104,7 @@ reg = <0x7e104000 0x10>; }; - mailbox: mailbox@7e00b800 { + mailbox: mailbox@7e00b880 { compatible = "brcm,bcm2835-mbox"; reg = <0x7e00b880 0x40>; interrupts = <0 1>; @@ -132,6 +132,209 @@ interrupt-controller; #interrupt-cells = <2>; + + /* Defines pin muxing groups according to + * BCM2835-ARM-Peripherals.pdf page 102. + * + * While each pin can have its mux selected + * for various functions individually, some + * groups only make sense to switch to a + * particular function together. + */ + dpi_gpio0: dpi_gpio0 { + brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 + 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; + emmc_gpio22: emmc_gpio22 { + brcm,pins = <22 23 24 25 26 27>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + emmc_gpio34: emmc_gpio34 { + brcm,pins = <34 35 36 37 38 39>; + brcm,function = <BCM2835_FSEL_ALT3>; + brcm,pull = <BCM2835_PUD_OFF + BCM2835_PUD_UP + BCM2835_PUD_UP + BCM2835_PUD_UP + BCM2835_PUD_UP + BCM2835_PUD_UP>; + }; + emmc_gpio48: emmc_gpio48 { + brcm,pins = <48 49 50 51 52 53>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + + gpclk0_gpio4: gpclk0_gpio4 { + brcm,pins = <4>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + gpclk1_gpio5: gpclk1_gpio5 { + brcm,pins = <5>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + gpclk1_gpio42: gpclk1_gpio42 { + brcm,pins = <42>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + gpclk1_gpio44: gpclk1_gpio44 { + brcm,pins = <44>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + gpclk2_gpio6: gpclk2_gpio6 { + brcm,pins = <6>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + gpclk2_gpio43: gpclk2_gpio43 { + brcm,pins = <43>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + + i2c0_gpio0: i2c0_gpio0 { + brcm,pins = <0 1>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + i2c0_gpio32: i2c0_gpio32 { + brcm,pins = <32 34>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + i2c0_gpio44: i2c0_gpio44 { + brcm,pins = <44 45>; + brcm,function = <BCM2835_FSEL_ALT1>; + }; + i2c1_gpio2: i2c1_gpio2 { + brcm,pins = <2 3>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + i2c1_gpio44: i2c1_gpio44 { + brcm,pins = <44 45>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; + i2c_slave_gpio18: i2c_slave_gpio18 { + brcm,pins = <18 19 20 21>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + + jtag_gpio4: jtag_gpio4 { + brcm,pins = <4 5 6 12 13>; + brcm,function = <BCM2835_FSEL_ALT4>; + }; + jtag_gpio22: jtag_gpio22 { + brcm,pins = <22 23 24 25 26 27>; + brcm,function = <BCM2835_FSEL_ALT4>; + }; + + pcm_gpio18: pcm_gpio18 { + brcm,pins = <18 19 20 21>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pcm_gpio28: pcm_gpio28 { + brcm,pins = <28 29 30 31>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; + + pwm0_gpio12: pwm0_gpio12 { + brcm,pins = <12>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm0_gpio18: pwm0_gpio18 { + brcm,pins = <18>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + pwm0_gpio40: pwm0_gpio40 { + brcm,pins = <40>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm1_gpio13: pwm1_gpio13 { + brcm,pins = <13>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm1_gpio19: pwm1_gpio19 { + brcm,pins = <19>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + pwm1_gpio41: pwm1_gpio41 { + brcm,pins = <41>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm1_gpio45: pwm1_gpio45 { + brcm,pins = <45>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + + sdhost_gpio48: sdhost_gpio48 { + brcm,pins = <48 49 50 51 52 53>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + + spi0_gpio7: spi0_gpio7 { + brcm,pins = <7 8 9 10 11>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + spi0_gpio35: spi0_gpio35 { + brcm,pins = <35 36 37 38 39>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + spi1_gpio16: spi1_gpio16 { + brcm,pins = <16 17 18 19 20 21>; + brcm,function = <BCM2835_FSEL_ALT4>; + }; + spi2_gpio40: spi2_gpio40 { + brcm,pins = <40 41 42 43 44 45>; + brcm,function = <BCM2835_FSEL_ALT4>; + }; + + uart0_gpio14: uart0_gpio14 { + brcm,pins = <14 15>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + /* Separate from the uart0_gpio14 group + * because it conflicts with spi1_gpio16, and + * people often run uart0 on the two pins + * without flow contrl. + */ + uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 { + brcm,pins = <16 17>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + uart0_gpio30: uart0_gpio30 { + brcm,pins = <30 31>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + uart0_ctsrts_gpio32: uart0_ctsrts_gpio32 { + brcm,pins = <32 33>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + + uart1_gpio14: uart1_gpio14 { + brcm,pins = <14 15>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + uart1_ctsrts_gpio16: uart1_ctsrts_gpio16 { + brcm,pins = <16 17>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + uart1_gpio32: uart1_gpio32 { + brcm,pins = <32 33>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + uart1_ctsrts_gpio30: uart1_ctsrts_gpio30 { + brcm,pins = <30 31>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + uart1_gpio36: uart1_gpio36 { + brcm,pins = <36 37 38 39>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; + uart1_gpio40: uart1_gpio40 { + brcm,pins = <40 41>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + uart1_ctsrts_gpio42: uart1_ctsrts_gpio42 { + brcm,pins = <42 43>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; }; uart0: serial@7e201000 { @@ -187,6 +390,13 @@ interrupts = <2 14>; /* pwa1 */ }; + thermal: thermal@7e212000 { + compatible = "brcm,bcm2835-thermal"; + reg = <0x7e212000 0x8>; + clocks = <&clocks BCM2835_CLOCK_TSENS>; + status = "disabled"; + }; + aux: aux@0x7e215000 { compatible = "brcm,bcm2835-aux"; #clock-cells = <1>; @@ -266,6 +476,14 @@ status = "disabled"; }; + vec: vec@7e806000 { + compatible = "brcm,bcm2835-vec"; + reg = <0x7e806000 0x1000>; + clocks = <&clocks BCM2835_CLOCK_VEC>; + interrupts = <2 27>; + status = "disabled"; + }; + pixelvalve@7e807000 { compatible = "brcm,bcm2835-pixelvalve2"; reg = <0x7e807000 0x100>; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts index 112a5a834ddc..d241cee4bfcc 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts index 3600f56f46f4..b0e62042f62f 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index 9cb186ea2e97..c9ba6b964b38 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x18000000>; }; spi { @@ -136,10 +137,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &usb2 { vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts new file mode 100644 index 000000000000..f591b0f256d8 --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts @@ -0,0 +1,60 @@ +/* + * Copyright 2016 Luxul Inc. + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" + +/ { + compatible = "luxul,xap-1510v1", "brcm,bcm4708"; + model = "Luxul XAP-1510 V1"; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + 5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + 2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts index 1c7e53d60aa4..50d65d8fbd9a 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts @@ -56,10 +56,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &spi_nor { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index 8ce39d58eeb8..b9f66c0fae27 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { @@ -83,10 +84,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &usb3 { vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts index 6229ef283c41..ae0199f6c7a2 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index 70f4bb9d864a..36b628b190d7 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { @@ -119,10 +120,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &spi_nor { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi index eed4dd159995..d0eec099f1f8 100644 --- a/arch/arm/boot/dts/bcm4708.dtsi +++ b/arch/arm/boot/dts/bcm4708.dtsi @@ -34,3 +34,7 @@ }; }; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts index 71b98cfaf944..db8608be0ee7 100644 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index a9c8defed4d3..d51586d95b9a 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; spi { @@ -122,7 +123,3 @@ }; }; }; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts index 184fd9214110..de041b8c3342 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; gpio-keys { diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts new file mode 100644 index 000000000000..9b5759849983 --- /dev/null +++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts @@ -0,0 +1,60 @@ +/* + * Copyright 2017 Luxul Inc. + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm47081.dtsi" + +/ { + compatible = "luxul,xap-1410v1", "brcm,bcm47081", "brcm,bcm4708"; + model = "Luxul XAP-1410 V1"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + 5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + 2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts new file mode 100644 index 000000000000..c544ab302012 --- /dev/null +++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts @@ -0,0 +1,107 @@ +/* + * Copyright 2017 Luxul Inc. + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm47081.dtsi" +#include "bcm5301x-nand-cs0-bch4.dtsi" + +/ { + compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708"; + model = "Luxul XWR-1200 V1"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "bcm53xx:green:power"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + lan3 { + label = "bcm53xx:green:lan3"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + lan4 { + label = "bcm53xx:green:lan4"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + wan { + label = "bcm53xx:green:wan"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + lan2 { + label = "bcm53xx:green:lan2"; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + usb { + label = "bcm53xx:green:usb"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + + 2ghz { + label = "bcm53xx:green:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + 5ghz { + label = "bcm53xx:green:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + lan1 { + label = "bcm53xx:green:lan1"; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +}; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081.dtsi b/arch/arm/boot/dts/bcm47081.dtsi index f720012ee5ed..c5f7619af4a6 100644 --- a/arch/arm/boot/dts/bcm47081.dtsi +++ b/arch/arm/boot/dts/bcm47081.dtsi @@ -24,3 +24,7 @@ }; }; }; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts index 8ade7def2e8a..eaca6876db0f 100644 --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -9,7 +9,7 @@ /dts-v1/; -#include "bcm4708.dtsi" +#include "bcm4709.dtsi" #include "bcm5301x-nand-cs0-bch8.dtsi" / { @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts index 0653e7ef248c..b32957ca9443 100644 --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -9,7 +9,7 @@ /dts-v1/; -#include "bcm4708.dtsi" +#include "bcm4709.dtsi" #include "bcm5301x-nand-cs0-bch8.dtsi" / { @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x18000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts index a22ed144040b..f459a98a72c6 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts @@ -9,7 +9,7 @@ /dts-v1/; -#include "bcm4708.dtsi" +#include "bcm4709.dtsi" #include "bcm5301x-nand-cs0-bch8.dtsi" / { @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { @@ -101,6 +102,10 @@ }; }; -&uart0 { - status = "okay"; +&usb2 { + vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; +}; + +&usb3 { + vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts index ca181516c28a..8e39a84e5bf9 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts @@ -9,7 +9,7 @@ /dts-v1/; -#include "bcm4708.dtsi" +#include "bcm4709.dtsi" #include "bcm5301x-nand-cs0-bch8.dtsi" / { @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { @@ -107,6 +108,54 @@ }; }; +&pcie0 { + #address-cells = <3>; + #size-cells = <2>; + + bridge@0,0,0 { + reg = <0x0000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + wifi@0,1,0 { + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <5735000 5835000>; + }; + }; +}; + +&pcie1 { + #address-cells = <3>; + #size-cells = <2>; + + bridge@1,0,0 { + reg = <0x0000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + bridge@1,1,0 { + reg = <0x0000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + bridge@1,2,2 { + reg = <0x1000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + wifi@1,4,0 { + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <5170000 5730000>; + }; + }; + }; + }; +}; + &usb2 { vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts new file mode 100644 index 000000000000..c67bfaa0c8e8 --- /dev/null +++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts @@ -0,0 +1,110 @@ +/* + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm4709.dtsi" + +/ { + compatible = "tplink,archer-c9-v1", "brcm,bcm4709", "brcm,bcm4708"; + model = "TP-LINK Archer C9 V1"; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + lan { + label = "bcm53xx:blue:lan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wps { + label = "bcm53xx:blue:wps"; + gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + 2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + 5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + usb3 { + label = "bcm53xx:blue:usb3"; + gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + usb2 { + label = "bcm53xx:blue:usb2"; + gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wan-blue { + label = "bcm53xx:blue:wan"; + gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + power { + label = "bcm53xx:blue:power"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>; +}; + +&usb3 { + vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>; +}; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4709.dtsi b/arch/arm/boot/dts/bcm4709.dtsi new file mode 100644 index 000000000000..c645fea2b7f7 --- /dev/null +++ b/arch/arm/boot/dts/bcm4709.dtsi @@ -0,0 +1,12 @@ +/* + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + * + * Licensed under the ISC license. + */ + +#include "bcm4708.dtsi" + +&uart0 { + clock-frequency = <125000000>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index c8c0b3616935..64ded7643e9f 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -9,7 +9,7 @@ /dts-v1/; -#include "bcm4708.dtsi" +#include "bcm47094.dtsi" #include "bcm5301x-nand-cs0-bch1.dtsi" / { @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; nand: nand@18028000 { @@ -105,11 +106,6 @@ }; }; -&uart0 { - status = "okay"; - clock-frequency = <125000000>; -}; - &usb3 { vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts new file mode 100644 index 000000000000..5cf4ab1ebe85 --- /dev/null +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts @@ -0,0 +1,108 @@ +/* + * Copyright 2016 Luxul Inc. + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch4.dtsi" + +/ { + compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708"; + model = "Luxul XWR-3100 V1"; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "bcm53xx:green:power"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + lan3 { + label = "bcm53xx:green:lan3"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + lan4 { + label = "bcm53xx:green:lan4"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + wan { + label = "bcm53xx:green:wan"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + lan1 { + label = "bcm53xx:green:lan1"; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + lan2 { + label = "bcm53xx:green:lan2"; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + usb3 { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + + 2ghz { + label = "bcm53xx:green:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + 5ghz { + label = "bcm53xx:green:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb3 { + vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; +}; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts new file mode 100644 index 000000000000..600795ee1aed --- /dev/null +++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts @@ -0,0 +1,100 @@ +/* + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "netgear,r8500", "brcm,bcm47094", "brcm,bcm4708"; + model = "Netgear R8500"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000 + 0x88000000 0x18000000>; + }; + + leds { + compatible = "gpio-leds"; + + power0 { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + power1 { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + 5ghz-1 { + label = "bcm53xx:white:5ghz-1"; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + 5ghz-2 { + label = "bcm53xx:white:5ghz-2"; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + 2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + usb2 { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + usb3 { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + brightness { + label = "Backlight"; + linux,code = <KEY_BRIGHTNESS_ZERO>; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + + rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi new file mode 100644 index 000000000000..4840a782fc05 --- /dev/null +++ b/arch/arm/boot/dts/bcm47094.dtsi @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + * + * Licensed under the ISC license. + */ + +#include "bcm4708.dtsi" + +/ { + usb3_phy: usb3-phy { + compatible = "brcm,ns-bx-usb3-phy"; + }; +}; + +&uart0 { + clock-frequency = <125000000>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts new file mode 100644 index 000000000000..4403ae8790c2 --- /dev/null +++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts @@ -0,0 +1,74 @@ +/* + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm53573.dtsi" + +/ { + compatible = "tenda,ac9", "brcm,bcm47189", "brcm,bcm53573"; + model = "Tenda AC9"; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + usb { + label = "bcm53xx:blue:usb"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wps { + label = "bcm53xx:blue:wps"; + gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + 5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + system { + label = "bcm53xx:blue:system"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi new file mode 100644 index 000000000000..b4e875df9528 --- /dev/null +++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright 2016 Luxul Inc. + * + * Licensed under the ISC license. + */ + +#include "bcm5301x-nand-cs0.dtsi" + +&nandcs { + nand-ecc-algo = "bch"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; +}; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index ae4b3880616d..4fbb089cf5ad 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -149,6 +149,13 @@ clock-names = "phy-ref-clk"; }; + usb3_phy: usb3-phy { + compatible = "brcm,ns-ax-usb3-phy"; + reg = <0x18105000 0x1000>, <0x18003000 0x1000>; + reg-names = "dmp", "ccb-mii"; + #phy-cells = <0>; + }; + axi@18000000 { compatible = "brcm,bus-axi"; reg = <0x18000000 0x1000>; @@ -236,13 +243,39 @@ #gpio-cells = <2>; }; + pcie0: pcie@12000 { + reg = <0x00012000 0x1000>; + }; + + pcie1: pcie@13000 { + reg = <0x00013000 0x1000>; + }; + usb2: usb2@21000 { reg = <0x00021000 0x1000>; #address-cells = <1>; #size-cells = <1>; + ranges; + + interrupt-parent = <&gic>; + + ehci: ehci@21000 { + #usb-cells = <0>; - phys = <&usb2_phy>; + compatible = "generic-ehci"; + reg = <0x00021000 0x1000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_phy>; + }; + + ohci: ohci@22000 { + #usb-cells = <0>; + + compatible = "generic-ohci"; + reg = <0x00022000 0x1000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + }; }; usb3: usb3@23000 { @@ -250,6 +283,19 @@ #address-cells = <1>; #size-cells = <1>; + ranges; + + interrupt-parent = <&gic>; + + xhci: xhci@23000 { + #usb-cells = <0>; + + compatible = "generic-xhci"; + reg = <0x00023000 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb3_phy>; + phy-names = "usb"; + }; }; spi@29000 { diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi new file mode 100644 index 000000000000..2da04d0a7348 --- /dev/null +++ b/arch/arm/boot/dts/bcm53573.dtsi @@ -0,0 +1,181 @@ +/* + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + * + * Licensed under the ISC license. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + chosen { + stdout-path = &uart0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + }; + }; + + mpcore { + compatible = "simple-bus"; + ranges = <0x00000000 0x18310000 0x00008000>; + #address-cells = <1>; + #size-cells = <1>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x0100>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + alp: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <40000000>; + }; + }; + + axi@18000000 { + compatible = "brcm,bus-axi"; + reg = <0x18000000 0x1000>; + ranges = <0x00000000 0x18000000 0x00100000>; + #address-cells = <1>; + #size-cells = <1>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0x000fffff 0xffff>; + interrupt-map = + /* ChipCommon */ + <0x00000000 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + + /* IEEE 802.11 0 */ + <0x00001000 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + + /* PCIe Controller 0 */ + <0x00002000 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0x00002000 1 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0x00002000 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0x00002000 3 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0x00002000 4 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0x00002000 5 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + + /* USB 2.0 Controller */ + <0x00004000 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + + /* Ethernet Controller 0 */ + <0x00005000 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + + /* IEEE 802.11 1 */ + <0x0000a000 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + + /* Ethernet Controller 1 */ + <0x0000b000 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + + chipcommon: chipcommon@0 { + compatible = "simple-bus"; + reg = <0x00000000 0x1000>; + ranges; + + #address-cells = <1>; + #size-cells = <1>; + + gpio-controller; + #gpio-cells = <2>; + + uart0: serial@0300 { + compatible = "ns16550a"; + reg = <0x0300 0x100>; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&alp>; + status = "okay"; + }; + }; + + usb2: usb2@4000 { + reg = <0x4000 0x1000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + ehci: ehci@4000 { + compatible = "generic-ehci"; + reg = <0x4000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + ehci_port1: port@1 { + reg = <1>; + }; + + ehci_port2: port@2 { + reg = <2>; + }; + }; + + ohci: ohci@d000 { + #usb-cells = <0>; + + compatible = "generic-ohci"; + reg = <0xd000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + ohci_port1: port@1 { + reg = <1>; + }; + + ohci_port2: port@2 { + reg = <2>; + }; + }; + }; + + gmac0: ethernet@5000 { + reg = <0x5000 0x1000>; + }; + + gmac1: ethernet@b000 { + reg = <0xb000 0x1000>; + }; + + pmu@12000 { + compatible = "simple-mfd", "syscon"; + reg = <0x00012000 0x00001000>; + + ilp: ilp { + compatible = "brcm,bcm53573-ilp"; + clocks = <&alp>; + #clock-cells = <0>; + clock-output-names = "ilp"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts index 251a486f2da6..42855a7c1bfa 100644 --- a/arch/arm/boot/dts/bcm94708.dts +++ b/arch/arm/boot/dts/bcm94708.dts @@ -50,7 +50,3 @@ reg = <0x00000000 0x08000000>; }; }; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts index b16cac92904f..95e8be65f2f1 100644 --- a/arch/arm/boot/dts/bcm94709.dts +++ b/arch/arm/boot/dts/bcm94709.dts @@ -50,7 +50,3 @@ reg = <0x00000000 0x08000000>; }; }; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts index 0a9abecf9423..decd86bae901 100644 --- a/arch/arm/boot/dts/bcm953012er.dts +++ b/arch/arm/boot/dts/bcm953012er.dts @@ -70,10 +70,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &spi_nor { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts index 05a985a20378..bfd923096a8c 100644 --- a/arch/arm/boot/dts/bcm953012k.dts +++ b/arch/arm/boot/dts/bcm953012k.dts @@ -54,7 +54,6 @@ &uart0 { clock-frequency = <62499840>; - status = "okay"; }; &uart1 { diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts index a21b0fd21f4e..3f04a40eb90c 100644 --- a/arch/arm/boot/dts/bcm958522er.dts +++ b/arch/arm/boot/dts/bcm958522er.dts @@ -65,7 +65,6 @@ status = "okay"; }; - &amac1 { status = "okay"; }; @@ -125,6 +124,40 @@ }; }; +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts index be7f2f8ecf39..9fd542200d3d 100644 --- a/arch/arm/boot/dts/bcm958525er.dts +++ b/arch/arm/boot/dts/bcm958525er.dts @@ -65,7 +65,6 @@ status = "okay"; }; - &amac1 { status = "okay"; }; @@ -125,6 +124,40 @@ }; }; +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + &sata_phy0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index 959cde911c3c..41e7fd350fcd 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -59,6 +59,12 @@ }; }; +/* XHCI support needed to be complete */ + +&amac0 { + status = "okay"; +}; + &i2c0 { temperature-sensor@4c { compatible = "adi,adt7461a"; @@ -115,12 +121,6 @@ }; }; -/* XHCI, MMC, and Ethernet support needed to be complete */ - -&uart0 { - status = "okay"; -}; - &pcie0 { status = "okay"; }; @@ -129,6 +129,49 @@ status = "okay"; }; +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>; + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; +}; + +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + &sata_phy0 { status = "okay"; }; @@ -141,11 +184,10 @@ status = "okay"; }; -&pinctrl { - pinctrl-names = "default"; - pinctrl-0 = <&nand_sel>; - nand_sel: nand_sel { - function = "nand"; - groups = "nand_grp"; - }; +&sdio { + status = "ok"; +}; + +&uart0 { + status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts index ad2aa87dd15a..477c4860db52 100644 --- a/arch/arm/boot/dts/bcm958622hr.dts +++ b/arch/arm/boot/dts/bcm958622hr.dts @@ -65,6 +65,14 @@ status = "okay"; }; +&amac1 { + status = "okay"; +}; + +&amac2 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -120,6 +128,40 @@ }; }; +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + &srab { compatible = "brcm,bcm58622-srab", "brcm,nsp-srab"; status = "okay"; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index 4ceb8fef8041..c0a499d5ba44 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -65,6 +65,14 @@ status = "okay"; }; +&amac1 { + status = "okay"; +}; + +&amac2 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -120,6 +128,48 @@ }; }; +&sata_phy0 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + &srab { compatible = "brcm,bcm58623-srab", "brcm,nsp-srab"; status = "okay"; @@ -165,14 +215,6 @@ }; }; -&sata_phy0 { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index 442002597063..f7eb5854a224 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -1,7 +1,7 @@ /* * BSD LICENSE * - * Copyright (c) 2016 Broadcom. All rights reserved. + * Copyright(c) 2016 Broadcom. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -59,6 +59,18 @@ }; }; +&amac0 { + status = "okay"; +}; + +&amac1 { + status = "okay"; +}; + +&amac2 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -97,10 +109,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &pcie0 { status = "okay"; }; @@ -118,7 +126,49 @@ }; }; -&amac0 { +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + +&sata_phy0 { + status = "okay"; +}; + +&sata_phy1 { + status = "okay"; +}; + +&sata { status = "okay"; }; @@ -167,14 +217,6 @@ }; }; -&sata_phy0 { - status = "okay"; -}; - -&sata_phy1 { - status = "okay"; -}; - -&sata { +&uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index 05c5f98c8782..f8d47e517e18 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -53,14 +53,6 @@ }; }; -&uart0 { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - &amac0 { status = "okay"; }; @@ -69,27 +61,7 @@ status = "okay"; }; -&pcie0 { - status = "okay"; -}; - -&pcie1 { - status = "okay"; -}; - -&pcie2 { - status = "okay"; -}; - -&sata_phy0 { - status = "okay"; -}; - -&sata_phy1 { - status = "okay"; -}; - -&sata { +&amac2 { status = "okay"; }; @@ -112,30 +84,175 @@ reg = <0x00000000 0x00200000>; read-only; }; - partition@1 { + partition@200000 { label = "nenv"; reg = <0x00200000 0x00400000>; }; - partition@2 { + partition@600000 { label = "nsystem"; reg = <0x00600000 0x00a00000>; }; - partition@3 { + partition@1000000 { label = "nrootfs"; reg = <0x01000000 0x03000000>; }; - partition@4 { + partition@4000000 { label = "ncustfs"; reg = <0x04000000 0x3c000000>; }; }; }; +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie2 { + status = "okay"; +}; + &pinctrl { pinctrl-names = "default"; - pinctrl-0 = <&nand_sel>; + pinctrl-0 = <&nand_sel>, <&gpiobs>, <&pwmc>; + nand_sel: nand_sel { function = "nand"; groups = "nand_grp"; }; + + gpiobs: gpiobs { + function = "gpio_b"; + groups = "gpio_b_0_grp", "gpio_b_1_grp", "gpio_b_2_grp", + "gpio_b_3_grp"; + }; + + pwmc: pwmc { + function = "pwm"; + groups = "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp"; + }; + + emmc_sel: emmc_sel { + function = "emmc"; + groups = "emmc_grp"; + }; +}; + +&pwm { + status = "okay"; +}; + +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + +&sata_phy0 { + status = "okay"; +}; + +&sata_phy1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +/* + * By default the sd slot is functional. For emmc to work add "<&emmc_sel>" + * and delete "<&nand_sel>" in "pinctrl-0" property of pinctrl node. Remove the + * bus-width property here and disable the nand node with status = "disabled";. + * + * Ex: pinctrl-0 = <&emmc_sel>, <&gpiobs>, <&pwmc>; + */ +&sdio { + bus-width = <4>; + no-1-8-v; + status = "ok"; +}; + +&srab { + compatible = "brcm,bcm58625-srab", "brcm,nsp-srab"; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + label = "port0"; + reg = <0>; + }; + + port@1 { + label = "port1"; + reg = <1>; + }; + + port@2 { + label = "port2"; + reg = <2>; + }; + + port@3 { + label = "port3"; + reg = <3>; + }; + + port@4 { + label = "port4"; + reg = <4>; + }; + + port@5 { + ethernet = <&amac0>; + label = "cpu"; + reg = <5>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts index 104afe98a43b..16666324fda8 100644 --- a/arch/arm/boot/dts/bcm988312hr.dts +++ b/arch/arm/boot/dts/bcm988312hr.dts @@ -65,6 +65,14 @@ status = "okay"; }; +&amac1 { + status = "okay"; +}; + +&amac2 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -120,6 +128,40 @@ }; }; +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + &sata_phy0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts index f485308840ab..57aa5f8a7c77 100644 --- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts +++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts @@ -48,7 +48,7 @@ reg = <0x00000000 0x80000000>; }; - choosen { + chosen { bootargs = "earlyprintk"; stdout-path = "serial0:115200n8"; }; @@ -58,7 +58,7 @@ #address-cells = <1>; #size-cells = <0>; - reg_usb0_vbus: regulator@0 { + reg_usb0_vbus: regulator_usb0 { compatible = "regulator-fixed"; regulator-name = "usb0_vbus"; regulator-min-microvolt = <5000000>; @@ -67,7 +67,7 @@ enable-active-high; }; - reg_usb1_vbus: regulator@1 { + reg_usb1_vbus: regulator_usb1 { compatible = "regulator-fixed"; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>; @@ -76,7 +76,7 @@ enable-active-high; }; - reg_usb2_vbus: regulator@2 { + reg_usb2_vbus: regulator_usb2 { compatible = "regulator-fixed"; regulator-name = "usb2_vbus"; regulator-min-microvolt = <5000000>; @@ -85,7 +85,7 @@ enable-active-high; }; - reg_sdio1_vmmc: regulator@3 { + reg_sdio1_vmmc: regulator_sdio1_vmmc { compatible = "regulator-fixed"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -95,7 +95,7 @@ gpio = <&portb 21 GPIO_ACTIVE_HIGH>; }; - reg_sdio1_vqmmc: regulator@4 { + reg_sdio1_vqmmc: regulator_sido1_vqmmc { compatible = "regulator-gpio"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts b/arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts new file mode 100644 index 000000000000..bfde32e37123 --- /dev/null +++ b/arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts @@ -0,0 +1,94 @@ +/* + * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3 + * + * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> + * + * Licensed under GPLv2 or later + */ + +/dts-v1/; +#include "ox820.dtsi" + +/ { + model = "Cloud Engines PogoPlug Series 3"; + + compatible = "cloudengines,pogoplugv3", "oxsemi,ox820"; + + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; + }; + + memory { + /* 128Mbytes DDR */ + reg = <0x60000000 0x8000000>; + }; + + aliases { + serial0 = &uart0; + gpio0 = &gpio0; + gpio1 = &gpio1; + }; + + leds { + compatible = "gpio-leds"; + + blue { + label = "pogoplug:blue"; + gpios = <&gpio0 2 0>; + default-state = "keep"; + }; + + orange { + label = "pogoplug:orange"; + gpios = <&gpio1 16 1>; + default-state = "keep"; + }; + + green { + label = "pogoplug:green"; + gpios = <&gpio1 17 1>; + default-state = "keep"; + }; + }; +}; + +&uart0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; +}; + +&nandc { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-ecc-mode = "soft"; + nand-ecc-algo = "hamming"; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x00e00000>; + read-only; + }; + + partition@e00000 { + label = "ubi"; + reg = <0x00e00000 0x07200000>; + }; + }; +}; + +ða { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_etha_mdio>; +}; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 41de15fe15a2..d15107cba765 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -99,6 +99,7 @@ #size-cells = <1>; compatible = "m25p64"; spi-max-frequency = <30000000>; + m25p,fast-read; reg = <0>; partition@0 { label = "U-Boot-SPL"; @@ -289,3 +290,23 @@ }; }; }; + +&vpif { + pinctrl-names = "default"; + pinctrl-0 = <&vpif_capture_pins>; + status = "okay"; + + /* VPIF capture port */ + port { + vpif_ch0: endpoint@0 { + reg = <0>; + bus-width = <8>; + }; + + vpif_ch1: endpoint@1 { + reg = <1>; + bus-width = <8>; + data-shift = <8>; + }; + }; +}; diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index 7b8ab21fed6c..b837fec70eec 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "da850.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "DA850/AM1808/OMAP-L138 LCDK"; @@ -13,6 +14,7 @@ aliases { serial2 = &serial2; + ethernet0 = ð0; }; chosen { @@ -50,6 +52,62 @@ system-clock-frequency = <24576000>; }; }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + user1 { + label = "GPIO Key USER1"; + linux,code = <BTN_0>; + gpios = <&gpio 36 GPIO_ACTIVE_LOW>; + }; + + user2 { + label = "GPIO Key USER2"; + linux,code = <BTN_1>; + gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + }; + }; + + vga-bridge { + compatible = "ti,ths8135"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vga_bridge_in: endpoint { + remote-endpoint = <&lcdc_out_vga>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + ddc-i2c-bus = <&i2c0>; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_bridge_out>; + }; + }; + }; }; &pmx_core { @@ -104,6 +162,10 @@ status = "okay"; }; +&sata { + status = "okay"; +}; + &mdio { pinctrl-names = "default"; pinctrl-0 = <&mdio_pins>; @@ -122,7 +184,7 @@ bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; - cd-gpios = <&gpio 64 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -158,6 +220,18 @@ rx-num-evt = <32>; }; +&usb_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + &aemif { pinctrl-names = "default"; pinctrl-0 = <&nand_pins>; @@ -219,3 +293,36 @@ }; }; }; + +&prictrl { + status = "okay"; +}; + +&memctrl { + status = "okay"; +}; + +&lcdc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + port { + lcdc_out_vga: endpoint { + remote-endpoint = <&vga_bridge_in>; + }; + }; +}; + +&vpif { + pinctrl-names = "default"; + pinctrl-0 = <&vpif_capture_pins>; + status = "okay"; + + /* VPIF capture port */ + port { + vpif_ch0: endpoint { + bus-width = <8>; + }; + }; +}; diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts new file mode 100644 index 000000000000..112ec92064ce --- /dev/null +++ b/arch/arm/boot/dts/da850-lego-ev3.dts @@ -0,0 +1,313 @@ +/* + * Device tree for LEGO MINDSTORMS EV3 + * + * Copyright (C) 2017 David Lechner <david@lechnology.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation, version 2. + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pwm/pwm.h> + +#include "da850.dtsi" + +/ { + compatible = "lego,ev3", "ti,da850"; + model = "LEGO MINDSTORMS EV3"; + + aliases { + serial1 = &serial1; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x04000000>; + }; + + /* + * The buttons on the EV3 are mapped to keyboard keys. + */ + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + label = "EV3 Brick Buttons"; + pinctrl-names = "default"; + pinctrl-0 = <&button_pins>, <&button_bias>; + + center { + label = "Center"; + linux,code = <KEY_ENTER>; + gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; + }; + + left { + label = "Left"; + linux,code = <KEY_LEFT>; + gpios = <&gpio 102 GPIO_ACTIVE_HIGH>; + }; + + back { + label = "Back"; + linux,code = <KEY_BACKSPACE>; + gpios = <&gpio 106 GPIO_ACTIVE_HIGH>; + }; + + right { + label = "Right"; + linux,code = <KEY_RIGHT>; + gpios = <&gpio 124 GPIO_ACTIVE_HIGH>; + }; + + down { + label = "Down"; + linux,code = <KEY_DOWN>; + gpios = <&gpio 126 GPIO_ACTIVE_HIGH>; + }; + + up { + label = "Up"; + linux,code = <KEY_UP>; + gpios = <&gpio 127 GPIO_ACTIVE_HIGH>; + }; + }; + + /* + * The EV3 has two built-in bi-color LEDs behind the buttons. + */ + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + left_green { + label = "led0:green:brick-status"; + /* GP6[13] */ + gpios = <&gpio 103 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + right_red { + label = "led1:red:brick-status"; + /* GP6[7] */ + gpios = <&gpio 108 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + left_red { + label = "led0:red:brick-status"; + /* GP6[12] */ + gpios = <&gpio 109 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + right_green { + label = "led1:green:brick-status"; + /* GP6[14] */ + gpios = <&gpio 110 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; + + /* + * The EV3 is powered down by turning off the main 5V supply. + */ + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio 107 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&system_power_pin>; + }; + + /* + * This is a 5V current limiting regulator that is shared by USB, + * the sensor (input) ports, the motor (output) ports and the A/DC. + */ + vcc5v: regulator1 { + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v_pins>; + compatible = "regulator-fixed"; + regulator-name = "vcc5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 101 0>; + over-current-gpios = <&gpio 99 GPIO_ACTIVE_LOW>; + enable-active-high; + regulator-boot-on; + }; +}; + +&pmx_core { + status = "okay"; + + spi0_cs3_pin: pinmux_spi0_cs3_pin { + pinctrl-single,bits = < + /* CS3 */ + 0xc 0x01000000 0x0f000000 + >; + }; + + mmc0_cd_pin: pinmux_mmc0_cd { + pinctrl-single,bits = < + /* GP5[14] */ + 0x2C 0x00000080 0x000000f0 + >; + }; + + button_pins: pinmux_button_pins { + pinctrl-single,bits = < + /* GP1[13] */ + 0x8 0x00000800 0x00000f00 + /* GP6[10] */ + 0x34 0x00800000 0x00f00000 + /* GP6[6] */ + 0x38 0x00000080 0x000000f0 + /* GP7[12], GP7[14], GP7[15] */ + 0x40 0x00808800 0x00f0ff00 + >; + }; + + led_pins: pinmux_led_pins { + pinctrl-single,bits = < + /* GP6[12], GP6[13], GP6[14] */ + 0x34 0x00008880 0x0000fff0 + /* GP6[7] */ + 0x38 0x00000008 0x0000000f + >; + }; + + system_power_pin: pinmux_system_power { + pinctrl-single,bits = < + /* GP6[11] */ + 0x34 0x00080000 0x000f0000 + >; + }; + + vcc5v_pins: pinmux_vcc5v { + pinctrl-single,bits = < + /* GP6[5] */ + 0x40 0x00000080 0x000000f0 + /* GP6[3] */ + 0x4c 0x00008000 0x0000f000 + >; + }; +}; + +&pinconf { + status = "okay"; + + /* Buttons have external pulldown resistors */ + button_bias: button-bias-groups { + disable { + groups = "cp5", "cp24", "cp25", "cp28"; + bias-disable; + }; + }; +}; + +/* Input port 1 */ +&serial1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&serial1_rxtx_pins>; +}; + +&rtc0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + /* + * EEPROM contains the first stage bootloader, HW ID and Bluetooth MAC. + */ + eeprom@50 { + compatible = "microchip,24c128"; + pagesize = <64>; + read-only; + reg = <0x50>; + }; +}; + +&wdt { + status = "okay"; +}; + +&mmc0 { + status = "okay"; + max-frequency = <50000000>; + bus-width = <4>; + cd-gpios = <&gpio 94 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin>; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>, <&spi0_cs3_pin>; + + flash@0 { + compatible = "n25q128a13", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + ti,spi-wdelay = <8>; + + /* Partitions are based on the official firmware from LEGO */ + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x40000>; + }; + + partition@40000 { + label = "U-Boot Env"; + reg = <0x40000 0x10000>; + }; + + partition@50000 { + label = "Kernel"; + reg = <0x50000 0x200000>; + }; + + partition@250000 { + label = "Filesystem"; + reg = <0x250000 0xa50000>; + }; + + partition@cb0000 { + label = "Storage"; + reg = <0xcb0000 0x2f0000>; + }; + }; + }; +}; + +&gpio { + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; + vbus-supply = <&vcc5v>; +}; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index f79e1b91c680..92d633d1da68 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -36,6 +36,7 @@ reg = <0x14120 0x50>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <2>; pinctrl-single,bit-per-mux; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xf>; @@ -186,7 +187,54 @@ 0xc 0x88888888 0xffffffff >; }; + lcd_pins: pinmux_lcd_pins { + pinctrl-single,bits = < + /* + * LCD_D[2], LCD_D[3], LCD_D[4], LCD_D[5], + * LCD_D[6], LCD_D[7] + */ + 0x40 0x22222200 0xffffff00 + /* + * LCD_D[10], LCD_D[11], LCD_D[12], LCD_D[13], + * LCD_D[14], LCD_D[15], LCD_D[0], LCD_D[1] + */ + 0x44 0x22222222 0xffffffff + /* LCD_D[8], LCD_D[9] */ + 0x48 0x00000022 0x000000ff + /* LCD_PCLK */ + 0x48 0x02000000 0x0f000000 + /* LCD_AC_ENB_CS, LCD_VSYNC, LCD_HSYNC */ + 0x4c 0x02000022 0x0f0000ff + >; + }; + vpif_capture_pins: vpif_capture_pins { + pinctrl-single,bits = < + /* VP_DIN[2..7], VP_CLKIN1, VP_CLKIN0 */ + 0x38 0x11111111 0xffffffff + /* VP_DIN[10..15,0..1] */ + 0x3c 0x11111111 0xffffffff + /* VP_DIN[8..9] */ + 0x40 0x00000011 0x000000ff + /* VP_CLKIN3, VP_CLKIN2 */ + 0x4c 0x00010100 0x000f0f00 + >; + }; + }; + prictrl: priority-controller@14110 { + compatible = "ti,da850-mstpri"; + reg = <0x14110 0x0c>; + status = "disabled"; + }; + cfgchip: chip-controller@1417c { + compatible = "ti,da830-cfgchip", "syscon", "simple-mfd"; + reg = <0x1417c 0x14>; + + usb_phy: usb-phy { + compatible = "ti,da830-usb-phy"; + #phy-cells = <1>; + status = "disabled"; + }; }; edma0: edma@0 { compatible = "ti,edma3-tpcc"; @@ -229,22 +277,25 @@ interrupt-names = "edm3_tcerrint"; }; serial0: serial@42000 { - compatible = "ns16550a"; + compatible = "ti,da830-uart", "ns16550a"; reg = <0x42000 0x100>; + reg-io-width = <4>; reg-shift = <2>; interrupts = <25>; status = "disabled"; }; serial1: serial@10c000 { - compatible = "ns16550a"; + compatible = "ti,da830-uart", "ns16550a"; reg = <0x10c000 0x100>; + reg-io-width = <4>; reg-shift = <2>; interrupts = <53>; status = "disabled"; }; serial2: serial@10d000 { - compatible = "ns16550a"; + compatible = "ti,da830-uart", "ns16550a"; reg = <0x10d000 0x100>; + reg-io-width = <4>; reg-shift = <2>; interrupts = <61>; status = "disabled"; @@ -280,14 +331,30 @@ mmc0: mmc@40000 { compatible = "ti,da830-mmc"; reg = <0x40000 0x1000>; + cap-sd-highspeed; + cap-mmc-highspeed; interrupts = <16>; dmas = <&edma0 16 0>, <&edma0 17 0>; dma-names = "rx", "tx"; status = "disabled"; }; + vpif: video@217000 { + compatible = "ti,da850-vpif"; + reg = <0x217000 0x1000>; + interrupts = <92>; + status = "disabled"; + + /* VPIF capture port */ + port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; mmc1: mmc@21b000 { compatible = "ti,da830-mmc"; reg = <0x21b000 0x1000>; + cap-sd-highspeed; + cap-mmc-highspeed; interrupts = <72>; dmas = <&edma1 28 0>, <&edma1 29 0>; dma-names = "rx", "tx"; @@ -336,6 +403,8 @@ num-cs = <6>; ti,davinci-spi-intr-line = <1>; interrupts = <20>; + dmas = <&edma0 14 0>, <&edma0 15 0>; + dma-names = "rx", "tx"; status = "disabled"; }; spi1: spi@30e000 { @@ -350,6 +419,22 @@ dma-names = "rx", "tx"; status = "disabled"; }; + usb0: usb@200000 { + compatible = "ti,da830-musb"; + reg = <0x200000 0x10000>; + interrupts = <58>; + interrupt-names = "mc"; + dr_mode = "otg"; + phys = <&usb_phy 0>; + phy-names = "usb-phy"; + status = "disabled"; + }; + sata: sata@218000 { + compatible = "ti,da850-ahci"; + reg = <0x218000 0x2000>, <0x22c018 0x4>; + interrupts = <67>; + status = "disabled"; + }; mdio: mdio@224000 { compatible = "ti,davinci_mdio"; #address-cells = <1>; @@ -372,6 +457,14 @@ >; status = "disabled"; }; + usb1: usb@225000 { + compatible = "ti,da830-ohci"; + reg = <0x225000 0x1000>; + interrupts = <59>; + phys = <&usb_phy 1>; + phy-names = "usb-phy"; + status = "disabled"; + }; gpio: gpio@226000 { compatible = "ti,dm6441-gpio"; gpio-controller; @@ -386,6 +479,11 @@ ti,davinci-gpio-unbanked = <0>; status = "disabled"; }; + pinconf: pin-controller@22c00c { + compatible = "ti,da850-pupd"; + reg = <0x22c00c 0x8>; + status = "disabled"; + }; mcasp0: mcasp@100000 { compatible = "ti,da830-mcasp-audio"; @@ -399,6 +497,14 @@ <&edma0 0 1>; dma-names = "tx", "rx"; }; + + lcdc: display@213000 { + compatible = "ti,da850-tilcdc"; + reg = <0x213000 0x1000>; + interrupts = <52>; + max-pixelclock = <37500>; + status = "disabled"; + }; }; aemif: aemif@68000000 { compatible = "ti,da850-aemif"; @@ -410,4 +516,9 @@ 1 0 0x68000000 0x00008000>; status = "disabled"; }; + memctrl: memory-controller@b0000000 { + compatible = "ti,da850-ddr-controller"; + reg = <0xb0000000 0xe8>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index ff90a6ce6bdc..9708157f5daf 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -12,6 +12,7 @@ interrupt-parent = <&intc>; #address-cells = <1>; #size-cells = <1>; + chosen { }; aliases { i2c0 = &i2c1; @@ -251,7 +252,7 @@ }; uart1: uart@20000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart1"; reg = <0x20000 0x2000>; clock-frequency = <48000000>; @@ -261,7 +262,7 @@ }; uart2: uart@22000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart2"; reg = <0x22000 0x2000>; clock-frequency = <48000000>; @@ -271,7 +272,7 @@ }; uart3: uart@24000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart3"; reg = <0x24000 0x2000>; clock-frequency = <48000000>; @@ -331,10 +332,11 @@ ranges = <0 0x140000 0x20000>; scm_conf: scm_conf@0 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x0 0x800>; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0 0x800>; scm_clocks: clocks { #address-cells = <1>; @@ -373,6 +375,7 @@ reg = <0x800 0x438>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x307ff>; }; @@ -508,7 +511,6 @@ cpdma_channels = <8>; ale_entries = <1024>; bd_ram_size = <0x2000>; - no_bd_ram = <0>; mac_control = <0x20>; slaves = <2>; active_slave = <0>; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index f1e0f771ff29..276211e1ee53 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -12,6 +12,7 @@ interrupt-parent = <&intc>; #address-cells = <1>; #size-cells = <1>; + chosen { }; aliases { i2c0 = &i2c1; @@ -83,6 +84,7 @@ reg = <0x48140000 0x21000>; #address-cells = <1>; #size-cells = <1>; + #pinctrl-cells = <1>; ranges = <0 0x48140000 0x21000>; dm816x_pinmux: pinmux@800 { @@ -90,6 +92,7 @@ reg = <0x800 0x50a>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0xf>; }; @@ -370,7 +373,7 @@ }; uart1: uart@48020000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart1"; reg = <0x48020000 0x2000>; clock-frequency = <48000000>; @@ -380,7 +383,7 @@ }; uart2: uart@48022000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart2"; reg = <0x48022000 0x2000>; clock-frequency = <48000000>; @@ -390,7 +393,7 @@ }; uart3: uart@48024000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart3"; reg = <0x48024000 0x2000>; clock-frequency = <48000000>; diff --git a/arch/arm/boot/dts/dove-cm-a510.dtsi b/arch/arm/boot/dts/dove-cm-a510.dtsi index 59b4056b478f..9b9dfbe07be4 100644 --- a/arch/arm/boot/dts/dove-cm-a510.dtsi +++ b/arch/arm/boot/dts/dove-cm-a510.dtsi @@ -13,17 +13,17 @@ * published by the Free Software Foundation; version 2 of the * License. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/dove-sbc-a510.dts b/arch/arm/boot/dts/dove-sbc-a510.dts index 288e707dea99..2bb85a9b7614 100644 --- a/arch/arm/boot/dts/dove-sbc-a510.dts +++ b/arch/arm/boot/dts/dove-sbc-a510.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; version 2 of the * License. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 132f2be10889..4bc4b575c99b 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -21,6 +21,10 @@ reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */ }; + chosen { + stdout-path = &uart1; + }; + evm_3v3_sd: fixedregulator-sd { compatible = "regulator-fixed"; regulator-name = "evm_3v3_sd"; @@ -151,204 +155,6 @@ }; &dra7_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = <&vtt_pin>; - - vtt_pin: pinmux_vtt_pin { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37b4, PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */ - >; - }; - - i2c1_pins: pinmux_i2c1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda */ - DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl */ - >; - }; - - i2c2_pins: pinmux_i2c2_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ - DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ - >; - }; - - i2c3_pins: pinmux_i2c3_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3688, PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */ - DRA7XX_CORE_IOPAD(0x368c, PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */ - >; - }; - - mcspi1_pins: pinmux_mcspi1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37a4, PIN_INPUT | MUX_MODE0) /* spi1_sclk */ - DRA7XX_CORE_IOPAD(0x37a8, PIN_INPUT | MUX_MODE0) /* spi1_d1 */ - DRA7XX_CORE_IOPAD(0x37ac, PIN_INPUT | MUX_MODE0) /* spi1_d0 */ - DRA7XX_CORE_IOPAD(0x37b0, PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */ - DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */ - DRA7XX_CORE_IOPAD(0x37bc, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */ - >; - }; - - mcspi2_pins: pinmux_mcspi2_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37c0, PIN_INPUT | MUX_MODE0) /* spi2_sclk */ - DRA7XX_CORE_IOPAD(0x37c4, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */ - DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */ - DRA7XX_CORE_IOPAD(0x37cc, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */ - >; - }; - - uart1_pins: pinmux_uart1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37e0, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */ - DRA7XX_CORE_IOPAD(0x37e4, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */ - DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT | MUX_MODE3) /* uart1_ctsn */ - DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT | MUX_MODE3) /* uart1_rtsn */ - >; - }; - - uart2_pins: pinmux_uart2_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT | MUX_MODE0) /* uart2_rxd */ - DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT | MUX_MODE0) /* uart2_txd */ - DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT | MUX_MODE0) /* uart2_ctsn */ - DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT | MUX_MODE0) /* uart2_rtsn */ - >; - }; - - uart3_pins: pinmux_uart3_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */ - DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ - >; - }; - - usb1_pins: pinmux_usb1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ - >; - }; - - usb2_pins: pinmux_usb2_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */ - >; - }; - - nand_flash_x16: nand_flash_x16 { - /* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch - * So NAND flash requires following switch settings: - * SW5.1 (NAND_BOOTn) = ON (LOW) - * SW5.9 (GPMC_WPN) = OFF (HIGH) - */ - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ - DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */ - DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */ - DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */ - DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */ - DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */ - DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */ - DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */ - DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */ - DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */ - DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */ - DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */ - DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */ - DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */ - DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */ - DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */ - DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */ - DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */ - DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0 */ - DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */ - DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */ - DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */ - >; - }; - - cpsw_default: cpsw_default { - pinctrl-single,pins = < - /* Slave 1 */ - DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txc.rgmii0_txc */ - DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txctl.rgmii0_txctl */ - DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3.rgmii0_txd3 */ - DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd2.rgmii0_txd2 */ - DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd1.rgmii0_txd1 */ - DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd0.rgmii0_txd0 */ - DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0) /* rgmii0_rxc.rgmii0_rxc */ - DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0) /* rgmii0_rxctl.rgmii0_rxctl */ - DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd3.rgmii0_rxd3 */ - DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd2.rgmii0_rxd2 */ - DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd1.rgmii0_rxd1 */ - DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd0.rgmii0_rxd0 */ - - /* Slave 2 */ - DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */ - DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ - DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ - DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ - DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ - DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ - DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ - DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ - DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ - DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ - DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ - DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ - >; - - }; - - cpsw_sleep: cpsw_sleep { - pinctrl-single,pins = < - /* Slave 1 */ - DRA7XX_CORE_IOPAD(0x3650, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3654, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3658, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x365c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3660, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3664, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3668, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x366c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3670, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3674, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3678, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x367c, MUX_MODE15) - - /* Slave 2 */ - DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15) - >; - }; - - davinci_mdio_default: davinci_mdio_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */ - DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ - >; - }; - - davinci_mdio_sleep: davinci_mdio_sleep { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15) - >; - }; - dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ @@ -363,36 +169,36 @@ >; }; - atl_pins: pinmux_atl_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */ - DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */ - >; - }; - - mcasp3_pins: pinmux_mcasp3_pins { + mmc1_pins_default: mmc1_pins_default { pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */ - DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */ - DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */ - DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */ + DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ >; }; - mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins { + mmc2_pins_default: mmc2_pins_default { pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3724, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3728, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x372c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3730, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ >; }; }; &i2c1 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; clock-frequency = <400000>; tps659038: tps659038@58 { @@ -581,8 +387,6 @@ &i2c2 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; pcf_hdmi: gpio@26 { @@ -602,45 +406,35 @@ &i2c3 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins>; clock-frequency = <400000>; }; &mcspi1 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mcspi1_pins>; }; &mcspi2 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mcspi2_pins>; }; &uart1 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, <&dra7_pmx_core 0x3e0>; }; &uart2 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; }; &uart3 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; }; &mmc1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_default>; vmmc-supply = <&evm_3v3_sd>; vmmc_aux-supply = <&ldo1_reg>; bus-width = <4>; @@ -653,6 +447,8 @@ &mmc2 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_default>; vmmc-supply = <&evm_3v3_sw>; bus-width = <8>; }; @@ -732,14 +528,10 @@ &usb1 { dr_mode = "peripheral"; - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins>; }; &usb2 { dr_mode = "host"; - pinctrl-names = "default"; - pinctrl-0 = <&usb2_pins>; }; &elm { @@ -747,9 +539,12 @@ }; &gpmc { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&nand_flash_x16>; + /* + * For the existing IOdelay configuration via U-Boot we don't + * support NAND on dra7-evm. Keep it disabled. Enabling it + * requires a different configuration by U-Boot. + */ + status = "disabled"; ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */ nand@0,0 { compatible = "ti,omap2-nand"; @@ -845,9 +640,6 @@ &mac { status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cpsw_default>; - pinctrl-1 = <&cpsw_sleep>; dual_emac; }; @@ -863,12 +655,6 @@ dual_emac_res_vlan = <2>; }; -&davinci_mdio { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&davinci_mdio_default>; - pinctrl-1 = <&davinci_mdio_sleep>; -}; - &dcan1 { status = "ok"; pinctrl-names = "default", "sleep", "active"; @@ -878,9 +664,6 @@ }; &atl { - pinctrl-names = "default"; - pinctrl-0 = <&atl_pins>; - assigned-clocks = <&abe_dpll_sys_clk_mux>, <&atl_gfclk_mux>, <&dpll_abe_ck>, @@ -899,9 +682,6 @@ &mcasp3 { #sound-dai-cells = <0>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&mcasp3_pins>; - pinctrl-1 = <&mcasp3_sleep_pins>; assigned-clocks = <&mcasp3_ahclkx_mux>; assigned-clock-parents = <&atl_clkin2_ck>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index d4fcd68f6349..2c9e56f4aac5 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -18,6 +18,7 @@ compatible = "ti,dra7xx"; interrupt-parent = <&crossbar_mpu>; + chosen { }; aliases { i2c0 = &i2c1; @@ -56,7 +57,7 @@ interrupt-controller; #interrupt-cells = <3>; reg = <0x0 0x48211000 0x0 0x1000>, - <0x0 0x48212000 0x0 0x1000>, + <0x0 0x48212000 0x0 0x2000>, <0x0 0x48214000 0x0 0x2000>, <0x0 0x48216000 0x0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; @@ -171,6 +172,7 @@ reg = <0x1400 0x0468>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <32>; @@ -1376,6 +1378,7 @@ phy-names = "sata-phy"; clocks = <&sata_ref_clk>; ti,hwmods = "sata"; + ports-implemented = <0x1>; }; rtc: rtc@48838000 { @@ -1706,7 +1709,6 @@ cpdma_channels = <8>; ale_entries = <1024>; bd_ram_size = <0x2000>; - no_bd_ram = <0>; mac_control = <0x20>; slaves = <2>; active_slave = <0>; diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts new file mode 100644 index 000000000000..4d57a55473af --- /dev/null +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -0,0 +1,235 @@ +/* + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "dra72-evm-common.dtsi" +#include <dt-bindings/net/ti-dp83867.h> + +/ { + compatible = "ti,dra718-evm", "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7"; + model = "TI DRA718 EVM"; + + memory { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */ + }; + + vpo_sd_1v8_3v3: gpio-regulator-TPS74801 { + compatible = "regulator-gpio"; + + regulator-name = "vddshv8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + vin-supply = <&evm_5v0>; + + gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0 + 3000000 0x1>; + }; + + poweroff: gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>; + input; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + lp8733: lp8733@60 { + compatible = "ti,lp8733"; + reg = <0x60>; + + buck0-in-supply =<&vsys_3v3>; + buck1-in-supply =<&vsys_3v3>; + ldo0-in-supply =<&evm_5v0>; + ldo1-in-supply =<&evm_5v0>; + + lp8733_regulators: regulators { + lp8733_buck0_reg: buck0 { + /* FB_B0 -> LP8733-BUCK1 - VPO_S1_AVS - VDD_CORE_AVS (core, mpu, gpu) */ + regulator-name = "lp8733-buck0"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + lp8733_buck1_reg: buck1 { + /* FB_B1 -> LP8733-BUCK2 - VPO_S2_AVS - VDD_DSP_AVS (DSP/eve/iva) */ + regulator-name = "lp8733-buck1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + regulator-always-on; + }; + + lp8733_ldo0_reg: ldo0 { + /* LDO0 -> LP8733-LDO1 - VPO_L1_3V3 - VDDSHV8 (optional) */ + regulator-name = "lp8733-ldo0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + lp8733_ldo1_reg: ldo1 { + /* LDO1 -> LP8733-LDO2 - VPO_L2_3V3 - VDDA_USB3V3 */ + regulator-name = "lp8733-ldo1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + + lp8732: lp8732@61 { + compatible = "ti,lp8732"; + reg = <0x61>; + + buck0-in-supply =<&vsys_3v3>; + buck1-in-supply =<&vsys_3v3>; + ldo0-in-supply =<&vsys_3v3>; + ldo1-in-supply =<&vsys_3v3>; + + lp8732_regulators: regulators { + lp8732_buck0_reg: buck0 { + /* FB_B0 -> LP8732-BUCK1 - VPO_S3_1V8 - VDDS_1V8 */ + regulator-name = "lp8732-buck0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + lp8732_buck1_reg: buck1 { + /* FB_B1 -> LP8732-BUCK2 - VPO_S4_DDR - VDD_DDR_1V35 */ + regulator-name = "lp8732-buck1"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + lp8732_ldo0_reg: ldo0 { + /* LDO0 -> LP8732-LDO1 - VPO_L3_1V8 - VDA_1V8_PLL */ + regulator-name = "lp8732-ldo0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + lp8732_ldo1_reg: ldo1 { + /* LDO1 -> LP8732-LDO2 - VPO_L4_1V8 - VDA_1V8_PHY */ + regulator-name = "lp8732-ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&pcf_lcd { + interrupt-parent = <&gpio7>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; +}; + +&pcf_gpio_21 { + interrupt-parent = <&gpio7>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; +}; + +&pcf_hdmi { + p0 { + /* + * PM_OEn to High: Disable routing I2C3 to PM_I2C + * With this PM_SEL(p3) should not matter + */ + gpio-hog; + gpios = <0 GPIO_ACTIVE_LOW>; + output-high; + line-name = "pm_oe_n"; + }; +}; + +&mmc1 { + vmmc_aux-supply = <&vpo_sd_1v8_3v3>; +}; + +&mac { + mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>, + <&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */ + <&pcf_hdmi 10 GPIO_ACTIVE_LOW>; /* P12 */ + dual_emac; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <2>; + phy-mode = "rgmii-id"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <3>; + phy-mode = "rgmii-id"; + dual_emac_res_vlan = <2>; +}; + +&davinci_mdio { + dp83867_0: ethernet-phy@2 { + reg = <2>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + ti,impedance-control = <0x1f>; + }; + + dp83867_1: ethernet-phy@3 { + reg = <3>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + ti,impedance-control = <0x1f>; + }; +}; + +/* No Sata on this device */ +&sata_phy { + status = "disabled"; +}; + +&sata { + status = "disabled"; +}; + +/* No RTC on this device */ +&rtc { + status = "disabled"; +}; + +&usb2_phy1 { + phy-supply = <&lp8733_ldo1_reg>; +}; + +&usb2_phy2 { + phy-supply = <&lp8733_ldo1_reg>; +}; + +&dss { + /* Supplied by VDA_1V8_PLL */ + vdda_video-supply = <&lp8732_ldo0_reg>; +}; + +&hdmi { + /* Supplied by VDA_1V8_PHY */ + vdda_video-supply = <&lp8732_ldo1_reg>; +}; diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index c94d8d64710d..ad24544adf0f 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -18,11 +18,53 @@ display0 = &hdmi0; }; + chosen { + stdout-path = &uart1; + }; + + evm_12v0: fixedregulator-evm12v0 { + /* main supply */ + compatible = "regulator-fixed"; + regulator-name = "evm_12v0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + evm_5v0: fixedregulator-evm5v0 { + /* Output 1 of TPS43351QDAPRQ1 on dra72-evm */ + /* Output 1 of LM5140QRWGTQ1 on dra71-evm */ + compatible = "regulator-fixed"; + regulator-name = "evm_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&evm_12v0>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_3v3: fixedregulator-vsys3v3 { + /* Output 2 of TPS43351QDAPRQ1 on dra72-evm */ + /* Output 2 of LM5140QRWGTQ1 on dra71-evm */ + compatible = "regulator-fixed"; + regulator-name = "vsys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&evm_12v0>; + regulator-always-on; + regulator-boot-on; + }; + evm_3v3_sw: fixedregulator-evm_3v3 { + /* TPS22965DSG */ compatible = "regulator-fixed"; regulator-name = "evm_3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_3v3>; + regulator-always-on; + regulator-boot-on; }; aic_dvdd: fixedregulator-aic_dvdd { @@ -39,6 +81,7 @@ regulator-name = "evm_3v3_sd"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vin-supply = <&evm_3v3_sw>; enable-active-high; gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>; }; @@ -69,9 +112,6 @@ tpd12s015: encoder { compatible = "ti,tpd12s015"; - pinctrl-names = "default"; - pinctrl-0 = <&tpd12s015_pins>; - gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>, /* P4, CT CP HPD */ <&pcf_hdmi 5 GPIO_ACTIVE_HIGH>, /* P5, LS OE */ <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ @@ -134,72 +174,6 @@ }; &dra7_pmx_core { - i2c1_pins: pinmux_i2c1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ - DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ - >; - }; - - i2c5_pins: pinmux_i2c5_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ - DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ - >; - }; - - i2c5_pins: pinmux_i2c5_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ - DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ - >; - }; - - nand_default: nand_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ - DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */ - DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */ - DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */ - DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */ - DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */ - DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */ - DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */ - DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */ - DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */ - DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */ - DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */ - DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */ - DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */ - DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */ - DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */ - DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */ - DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */ - DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */ - DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */ - DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */ - DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT | MUX_MODE0) /* gpmc_wait0 */ - >; - }; - - usb1_pins: pinmux_usb1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ - >; - }; - - usb2_pins: pinmux_usb2_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */ - >; - }; - - tps65917_pins_default: tps65917_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */ - >; - }; - mmc1_pins_default: mmc1_pins_default { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ @@ -240,159 +214,19 @@ DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */ >; }; - - hdmi_pins: pinmux_hdmi_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */ - DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */ - >; - }; - - tpd12s015_pins: pinmux_tpd12s015_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */ - >; - }; - - atl_pins: pinmux_atl_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */ - DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */ - >; - }; - - mcasp3_pins: pinmux_mcasp3_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */ - DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */ - DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */ - DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */ - >; - }; - - mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT_PULLDOWN | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE15) - >; - }; }; &i2c1 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; clock-frequency = <400000>; - tps65917: tps65917@58 { - compatible = "ti,tps65917"; - reg = <0x58>; - - pinctrl-names = "default"; - pinctrl-0 = <&tps65917_pins_default>; - - interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ + pcf_lcd: gpio@20 { + compatible = "nxp,pcf8575"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - - ti,system-power-controller; - - tps65917_pmic { - compatible = "ti,tps65917-pmic"; - - tps65917_regulators: regulators { - smps1_reg: smps1 { - /* VDD_MPU */ - regulator-name = "smps1"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-always-on; - regulator-boot-on; - }; - - smps2_reg: smps2 { - /* VDD_CORE */ - regulator-name = "smps2"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1150000>; - regulator-boot-on; - regulator-always-on; - }; - - smps3_reg: smps3 { - /* VDD_GPU IVA DSPEVE */ - regulator-name = "smps3"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-boot-on; - regulator-always-on; - }; - - smps4_reg: smps4 { - /* VDDS1V8 */ - regulator-name = "smps4"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - smps5_reg: smps5 { - /* VDD_DDR */ - regulator-name = "smps5"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo1_reg: ldo1 { - /* LDO1_OUT --> SDIO */ - regulator-name = "ldo1"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - regulator-allow-bypass; - }; - - ldo3_reg: ldo3 { - /* VDDA_1V8_PHY */ - regulator-name = "ldo3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo5_reg: ldo5 { - /* VDDA_1V8_PLL */ - regulator-name = "ldo5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo4_reg: ldo4 { - /* VDDA_3V_USB: VDDA_USBHS33 */ - regulator-name = "ldo4"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - }; - }; - - tps65917_power_button { - compatible = "ti,palmas-pwrbutton"; - interrupt-parent = <&tps65917>; - interrupts = <1 IRQ_TYPE_NONE>; - wakeup-source; - ti,palmas-long-press-seconds = <6>; - }; }; pcf_gpio_21: gpio@21 { @@ -423,8 +257,6 @@ &i2c5 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_pins>; clock-frequency = <400000>; pcf_hdmi: pcf8575@26 { @@ -461,9 +293,12 @@ }; &gpmc { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&nand_default>; + /* + * For the existing IOdelay configuration via U-Boot we don't + * support NAND on dra72-evm. Keep it disabled. Enabling it + * requires a different configuration by U-Boot. + */ + status = "disabled"; ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */ nand@0,0 { /* To use NAND, DIP switch SW5 must be set like so: @@ -548,14 +383,6 @@ }; }; -&usb2_phy1 { - phy-supply = <&ldo4_reg>; -}; - -&usb2_phy2 { - phy-supply = <&ldo4_reg>; -}; - &omap_dwc3_1 { extcon = <&extcon_usb1>; }; @@ -566,14 +393,10 @@ &usb1 { dr_mode = "peripheral"; - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins>; }; &usb2 { dr_mode = "host"; - pinctrl-names = "default"; - pinctrl-0 = <&usb2_pins>; }; &mmc1 { @@ -581,7 +404,6 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins_default>; vmmc-supply = <&evm_3v3_sd>; - vmmc_aux-supply = <&ldo1_reg>; bus-width = <4>; /* * SDCD signal is not being used here - using the fact that GPIO mode @@ -603,71 +425,8 @@ max-frequency = <192000000>; }; -&dra7_pmx_core { - cpsw_default: cpsw_default { - pinctrl-single,pins = < - /* Slave 2 */ - DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */ - DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ - DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ - DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ - DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ - DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ - DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ - DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ - DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ - DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ - DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ - DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ - >; - - }; - - cpsw_sleep: cpsw_sleep { - pinctrl-single,pins = < - /* Slave 2 */ - DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15) - >; - }; - - davinci_mdio_default: davinci_mdio_default { - pinctrl-single,pins = < - /* MDIO */ - DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */ - DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ - >; - }; - - davinci_mdio_sleep: davinci_mdio_sleep { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15) - >; - }; -}; - &mac { status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cpsw_default>; - pinctrl-1 = <&cpsw_sleep>; -}; - -&davinci_mdio { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&davinci_mdio_default>; - pinctrl-1 = <&davinci_mdio_sleep>; }; &dcan1 { @@ -741,16 +500,11 @@ &dss { status = "ok"; - - vdda_video-supply = <&ldo5_reg>; }; &hdmi { status = "ok"; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_pins>; - port { hdmi_out: endpoint { remote-endpoint = <&tpd12s015_in>; @@ -759,9 +513,6 @@ }; &atl { - pinctrl-names = "default"; - pinctrl-0 = <&atl_pins>; - assigned-clocks = <&abe_dpll_sys_clk_mux>, <&atl_gfclk_mux>, <&dpll_abe_ck>, @@ -780,9 +531,6 @@ &mcasp3 { #sound-dai-cells = <0>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&mcasp3_pins>; - pinctrl-1 = <&mcasp3_sleep_pins>; assigned-clocks = <&mcasp3_ahclkx_mux>; assigned-clock-parents = <&atl_clkin2_ck>; diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts index 064b322a7a04..3ecac56bf504 100644 --- a/arch/arm/boot/dts/dra72-evm-revc.dts +++ b/arch/arm/boot/dts/dra72-evm-revc.dts @@ -17,17 +17,22 @@ }; }; -&tps65917_regulators { - ldo2_reg: ldo2 { - /* LDO2_OUT --> VDDA_1V8_PHY2 */ - regulator-name = "ldo2"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; +&i2c1 { + tps65917: tps65917@58 { + reg = <0x58>; + + interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ }; }; +#include "dra72-evm-tps65917.dtsi" + +&ldo2_reg { + /* LDO2_OUT --> VDDA_1V8_PHY2 */ + regulator-always-on; + regulator-boot-on; +}; + &hdmi { vdda-supply = <&ldo2_reg>; }; @@ -59,15 +64,21 @@ &davinci_mdio { dp83867_0: ethernet-phy@2 { reg = <2>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; - ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_NS>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + ti,min-output-impedance; + interrupt-parent = <&gpio6>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; }; dp83867_1: ethernet-phy@3 { reg = <3>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; - ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_NS>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + ti,min-output-impedance; + interrupt-parent = <&gpio6>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; }; }; diff --git a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi new file mode 100644 index 000000000000..e6df676886c0 --- /dev/null +++ b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi @@ -0,0 +1,150 @@ +/* + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Integrated Power Management Chip + * http://www.ti.com/lit/ds/symlink/tps65917-q1.pdf + */ + +&tps65917 { + compatible = "ti,tps65917"; + + interrupt-controller; + #interrupt-cells = <2>; + + ti,system-power-controller; + + tps65917_pmic { + compatible = "ti,tps65917-pmic"; + + smps1-in-supply = <&vsys_3v3>; + smps2-in-supply = <&vsys_3v3>; + smps3-in-supply = <&vsys_3v3>; + smps4-in-supply = <&vsys_3v3>; + smps5-in-supply = <&vsys_3v3>; + ldo1-in-supply = <&vsys_3v3>; + ldo2-in-supply = <&vsys_3v3>; + ldo3-in-supply = <&vsys_3v3>; + ldo4-in-supply = <&evm_5v0>; + ldo5-in-supply = <&vsys_3v3>; + + tps65917_regulators: regulators { + smps1_reg: smps1 { + /* VDD_MPU */ + regulator-name = "smps1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps2_reg: smps2 { + /* VDD_CORE */ + regulator-name = "smps2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + smps3_reg: smps3 { + /* VDD_GPU IVA DSPEVE */ + regulator-name = "smps3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + regulator-always-on; + }; + + smps4_reg: smps4 { + /* VDDS1V8 */ + regulator-name = "smps4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + smps5_reg: smps5 { + /* VDD_DDR */ + regulator-name = "smps5"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + /* LDO1_OUT --> SDIO */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-allow-bypass; + }; + + ldo2_reg: ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-bypass; + }; + + ldo3_reg: ldo3 { + /* VDDA_1V8_PHY */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + /* VDDA_1V8_PLL */ + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldo4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + }; + }; + + tps65917_power_button { + compatible = "ti,palmas-pwrbutton"; + interrupt-parent = <&tps65917>; + interrupts = <1 IRQ_TYPE_NONE>; + wakeup-source; + ti,palmas-long-press-seconds = <6>; + }; +}; + +&usb2_phy1 { + phy-supply = <&ldo4_reg>; +}; + +&usb2_phy2 { + phy-supply = <&ldo4_reg>; +}; + +&dss { + vdda_video-supply = <&ldo5_reg>; +}; + +&mmc1 { + vmmc_aux-supply = <&ldo1_reg>; +}; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index e3a9b6985693..cd9c4ff12654 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -15,16 +15,16 @@ }; }; -&tps65917_regulators { - ldo2_reg: ldo2 { - /* LDO2_OUT --> TP1017 (UNUSED) */ - regulator-name = "ldo2"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-allow-bypass; +&i2c1 { + tps65917: tps65917@58 { + reg = <0x58>; + + interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ }; }; +#include "dra72-evm-tps65917.dtsi" + &hdmi { vdda-supply = <&ldo3_reg>; }; diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts index 2ccbb57fbfa8..c15e7e0c7e08 100644 --- a/arch/arm/boot/dts/ecx-2000.dts +++ b/arch/arm/boot/dts/ecx-2000.dts @@ -99,7 +99,7 @@ interrupt-controller; interrupts = <1 9 0xf04>; reg = <0xfff11000 0x1000>, - <0xfff12000 0x1000>, + <0xfff12000 0x2000>, <0xfff14000 0x2000>, <0xfff16000 0x2000>; }; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index cd119400f440..0124faf175c8 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -8,13 +8,14 @@ * kind, whether express or implied. */ -#include "skeleton.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> / { compatible = "renesas,emev2"; interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; aliases { gpio0 = &gpio0; diff --git a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi index f78c14c82e17..25186ac4188d 100644 --- a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi +++ b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi @@ -17,7 +17,7 @@ mfc_left: region_mfc_left { compatible = "shared-dma-pool"; no-map; - size = <0x1000000>; + size = <0x2400000>; alignment = <0x100000>; }; diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts index be4d6aa379f3..4bd2ee87124e 100644 --- a/arch/arm/boot/dts/exynos3250-artik5-eval.dts +++ b/arch/arm/boot/dts/exynos3250-artik5-eval.dts @@ -28,7 +28,7 @@ vqmmc-supply = <&ldo3_reg>; card-detect-delay = <200>; clock-frequency = <100000000>; - clock-freq-min-max = <400000 100000000>; + max-frequency = <100000000>; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index a70819b1b739..59c89d7662a8 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -310,7 +310,7 @@ card-detect-delay = <200>; vmmc-supply = <&ldo12_reg>; clock-frequency = <100000000>; - clock-freq-min-max = <400000 100000000>; + max-frequency = <100000000>; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 66f04f6ba6bb..cccfe4b791d1 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -435,7 +435,7 @@ card-detect-delay = <200>; vmmc-supply = <&vemmc_reg>; clock-frequency = <100000000>; - clock-freq-min-max = <400000 100000000>; + max-frequency = <100000000>; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi index ec331169c3d9..a149f148e659 100644 --- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi @@ -362,8 +362,14 @@ interrupt-controller; interrupt-parent = <&gic>; - interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>, - <0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; }; @@ -373,8 +379,14 @@ interrupt-controller; interrupt-parent = <&gic>; - interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>, - <0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; }; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 3967ee5f7752..548413e23c47 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -649,7 +649,7 @@ card-detect-delay = <200>; vmmc-supply = <&ldo12_reg>; clock-frequency = <100000000>; - clock-freq-min-max = <400000 100000000>; + max-frequency = <100000000>; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index e9d2556c0dfd..9c28ef4508e0 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -20,6 +20,8 @@ #include "exynos4-cpu-thermal.dtsi" #include "exynos-syscon-restart.dtsi" #include <dt-bindings/clock/exynos3250.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> / { compatible = "samsung,exynos3250"; @@ -211,7 +213,8 @@ rtc: rtc@10070000 { compatible = "samsung,s3c6410-rtc"; reg = <0x10070000 0x100>; - interrupts = <0 73 0>, <0 74 0>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&pmu_system_controller>; status = "disabled"; }; @@ -219,7 +222,7 @@ tmu: tmu@100C0000 { compatible = "samsung,exynos3250-tmu"; reg = <0x100C0000 0x100>; - interrupts = <0 216 0>; + interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_TMU_APBIF>; clock-names = "tmu_apbif"; #include "exynos4412-tmu-sensor-conf.dtsi" @@ -231,17 +234,24 @@ #interrupt-cells = <3>; interrupt-controller; reg = <0x10481000 0x1000>, - <0x10482000 0x1000>, + <0x10482000 0x2000>, <0x10484000 0x2000>, <0x10486000 0x2000>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; mct@10050000 { compatible = "samsung,exynos4210-mct"; reg = <0x10050000 0x800>; - interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>, - <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>; + interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>; clock-names = "fin_pll", "mct"; }; @@ -249,24 +259,24 @@ pinctrl_1: pinctrl@11000000 { compatible = "samsung,exynos3250-pinctrl"; reg = <0x11000000 0x1000>; - interrupts = <0 225 0>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; - interrupts = <0 48 0>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; }; }; pinctrl_0: pinctrl@11400000 { compatible = "samsung,exynos3250-pinctrl"; reg = <0x11400000 0x1000>; - interrupts = <0 240 0>; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; }; jpeg: codec@11830000 { compatible = "samsung,exynos3250-jpeg"; reg = <0x11830000 0x1000>; - interrupts = <0 171 0>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_JPEG>, <&cmu CLK_SCLK_JPEG>; clock-names = "jpeg", "sclk"; power-domains = <&pd_cam>; @@ -280,7 +290,8 @@ sysmmu_jpeg: sysmmu@11A60000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11a60000 0x1000>; - interrupts = <0 156 0>, <0 161 0>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&cmu CLK_SMMUJPEG>, <&cmu CLK_JPEG>; power-domains = <&pd_cam>; @@ -291,7 +302,9 @@ compatible = "samsung,exynos3250-fimd"; reg = <0x11c00000 0x30000>; interrupt-names = "fifo", "vsync", "lcd_sys"; - interrupts = <0 84 0>, <0 85 0>, <0 86 0>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>; clock-names = "sclk_fimd", "fimd"; power-domains = <&pd_lcd0>; @@ -303,7 +316,7 @@ dsi_0: dsi@11C80000 { compatible = "samsung,exynos3250-mipi-dsi"; reg = <0x11C80000 0x10000>; - interrupts = <0 83 0>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; samsung,phy-type = <0>; power-domains = <&pd_lcd0>; phys = <&mipi_phy 1>; @@ -318,7 +331,8 @@ sysmmu_fimd0: sysmmu@11E20000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11e20000 0x1000>; - interrupts = <0 80 0>, <0 81 0>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>; power-domains = <&pd_lcd0>; @@ -328,7 +342,7 @@ hsotg: hsotg@12480000 { compatible = "snps,dwc2"; reg = <0x12480000 0x20000>; - interrupts = <0 141 0>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_USBOTG>; clock-names = "otg"; phys = <&exynos_usbphy 0>; @@ -339,7 +353,7 @@ mshc_0: mshc@12510000 { compatible = "samsung,exynos5420-dw-mshc"; reg = <0x12510000 0x1000>; - interrupts = <0 142 0>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>; clock-names = "biu", "ciu"; fifo-depth = <0x80>; @@ -351,7 +365,7 @@ mshc_1: mshc@12520000 { compatible = "samsung,exynos5420-dw-mshc"; reg = <0x12520000 0x1000>; - interrupts = <0 143 0>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>; clock-names = "biu", "ciu"; fifo-depth = <0x80>; @@ -363,7 +377,7 @@ mshc_2: mshc@12530000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12530000 0x1000>; - interrupts = <0 144 0>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>; clock-names = "biu", "ciu"; fifo-depth = <0x80>; @@ -391,7 +405,7 @@ pdma0: pdma@12680000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x12680000 0x1000>; - interrupts = <0 138 0>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -402,7 +416,7 @@ pdma1: pdma@12690000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x12690000 0x1000>; - interrupts = <0 139 0>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -415,7 +429,7 @@ compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2"; reg = <0x126C0000 0x100>; - interrupts = <0 137 0>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; clock-names = "adc", "sclk"; clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; #io-channel-cells = <1>; @@ -427,7 +441,7 @@ mfc: codec@13400000 { compatible = "samsung,mfc-v7"; reg = <0x13400000 0x10000>; - interrupts = <0 102 0>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; clock-names = "mfc", "sclk_mfc"; clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>; power-domains = <&pd_mfc>; @@ -437,7 +451,8 @@ sysmmu_mfc: sysmmu@13620000 { compatible = "samsung,exynos-sysmmu"; reg = <0x13620000 0x1000>; - interrupts = <0 96 0>, <0 98 0>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&cmu CLK_SMMUMFC_L>, <&cmu CLK_MFC>; power-domains = <&pd_mfc>; @@ -447,7 +462,7 @@ serial_0: serial@13800000 { compatible = "samsung,exynos4210-uart"; reg = <0x13800000 0x100>; - interrupts = <0 109 0>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; pinctrl-names = "default"; @@ -458,7 +473,7 @@ serial_1: serial@13810000 { compatible = "samsung,exynos4210-uart"; reg = <0x13810000 0x100>; - interrupts = <0 110 0>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; pinctrl-names = "default"; @@ -469,7 +484,7 @@ serial_2: serial@13820000 { compatible = "samsung,exynos4210-uart"; reg = <0x13820000 0x100>; - interrupts = <0 111 0>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; pinctrl-names = "default"; @@ -482,7 +497,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x13860000 0x100>; - interrupts = <0 113 0>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_I2C0>; clock-names = "i2c"; pinctrl-names = "default"; @@ -495,7 +510,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x13870000 0x100>; - interrupts = <0 114 0>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_I2C1>; clock-names = "i2c"; pinctrl-names = "default"; @@ -508,7 +523,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x13880000 0x100>; - interrupts = <0 115 0>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_I2C2>; clock-names = "i2c"; pinctrl-names = "default"; @@ -521,7 +536,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x13890000 0x100>; - interrupts = <0 116 0>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_I2C3>; clock-names = "i2c"; pinctrl-names = "default"; @@ -534,7 +549,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x138A0000 0x100>; - interrupts = <0 117 0>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_I2C4>; clock-names = "i2c"; pinctrl-names = "default"; @@ -547,7 +562,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x138B0000 0x100>; - interrupts = <0 118 0>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_I2C5>; clock-names = "i2c"; pinctrl-names = "default"; @@ -560,7 +575,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x138C0000 0x100>; - interrupts = <0 119 0>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_I2C6>; clock-names = "i2c"; pinctrl-names = "default"; @@ -573,7 +588,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x138D0000 0x100>; - interrupts = <0 120 0>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_I2C7>; clock-names = "i2c"; pinctrl-names = "default"; @@ -584,7 +599,7 @@ spi_0: spi@13920000 { compatible = "samsung,exynos4210-spi"; reg = <0x13920000 0x100>; - interrupts = <0 121 0>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma0 7>, <&pdma0 6>; dma-names = "tx", "rx"; #address-cells = <1>; @@ -600,7 +615,7 @@ spi_1: spi@13930000 { compatible = "samsung,exynos4210-spi"; reg = <0x13930000 0x100>; - interrupts = <0 122 0>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma1 7>, <&pdma1 6>; dma-names = "tx", "rx"; #address-cells = <1>; @@ -616,7 +631,7 @@ i2s2: i2s@13970000 { compatible = "samsung,s3c6410-i2s"; reg = <0x13970000 0x100>; - interrupts = <0 126 0>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_I2S>, <&cmu CLK_SCLK_I2S>; clock-names = "iis", "i2s_opclk0"; dmas = <&pdma0 14>, <&pdma0 13>; @@ -629,15 +644,19 @@ pwm: pwm@139D0000 { compatible = "samsung,exynos4210-pwm"; reg = <0x139D0000 0x1000>; - interrupts = <0 104 0>, <0 105 0>, <0 106 0>, - <0 107 0>, <0 108 0>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; #pwm-cells = <3>; status = "disabled"; }; pmu { compatible = "arm,cortex-a7-pmu"; - interrupts = <0 18 0>, <0 19 0>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; }; ppmu_dmc0: ppmu_dmc0@106a0000 { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 5f034eb5a5e2..18def1c774d5 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -21,6 +21,8 @@ #include <dt-bindings/clock/exynos4.h> #include <dt-bindings/clock/exynos-audss-clk.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> #include "exynos-syscon-restart.dtsi" / { @@ -62,8 +64,10 @@ i2s0: i2s@03830000 { compatible = "samsung,s5pv210-i2s"; reg = <0x03830000 0x100>; - clocks = <&clock_audss EXYNOS_I2S_BUS>; - clock-names = "iis"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; #clock-cells = <1>; clock-output-names = "i2s_cdclk0"; dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>; @@ -78,6 +82,11 @@ reg = <0x10000000 0x100>; }; + scu: snoop-control-unit@10500000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x10500000 0x2000>; + }; + memory-controller@12570000 { compatible = "samsung,exynos4210-srom"; reg = <0x12570000 0x14>; @@ -93,18 +102,21 @@ compatible = "samsung,exynos4210-pd"; reg = <0x10023C40 0x20>; #power-domain-cells = <0>; + label = "MFC"; }; pd_g3d: g3d-power-domain@10023C60 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C60 0x20>; #power-domain-cells = <0>; + label = "G3D"; }; pd_lcd0: lcd0-power-domain@10023C80 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C80 0x20>; #power-domain-cells = <0>; + label = "LCD0"; }; pd_tv: tv-power-domain@10023C20 { @@ -112,24 +124,28 @@ reg = <0x10023C20 0x20>; #power-domain-cells = <0>; power-domains = <&pd_lcd0>; + label = "TV"; }; pd_cam: cam-power-domain@10023C00 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C00 0x20>; #power-domain-cells = <0>; + label = "CAM"; }; pd_gps: gps-power-domain@10023CE0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CE0 0x20>; #power-domain-cells = <0>; + label = "GPS"; }; pd_gps_alive: gps-alive-power-domain@10023D00 { compatible = "samsung,exynos4210-pd"; reg = <0x10023D00 0x20>; #power-domain-cells = <0>; + label = "GPS alive"; }; gic: interrupt-controller@10490000 { @@ -168,7 +184,7 @@ dsi_0: dsi@11C80000 { compatible = "samsung,exynos4210-mipi-dsi"; reg = <0x11C80000 0x10000>; - interrupts = <0 79 0>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_lcd0>; phys = <&mipi_phy 1>; phy-names = "dsim"; @@ -191,7 +207,7 @@ fimc_0: fimc@11800000 { compatible = "samsung,exynos4210-fimc"; reg = <0x11800000 0x1000>; - interrupts = <0 84 0>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>; clock-names = "fimc", "sclk_fimc"; power-domains = <&pd_cam>; @@ -203,7 +219,7 @@ fimc_1: fimc@11810000 { compatible = "samsung,exynos4210-fimc"; reg = <0x11810000 0x1000>; - interrupts = <0 85 0>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>; clock-names = "fimc", "sclk_fimc"; power-domains = <&pd_cam>; @@ -215,7 +231,7 @@ fimc_2: fimc@11820000 { compatible = "samsung,exynos4210-fimc"; reg = <0x11820000 0x1000>; - interrupts = <0 86 0>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>; clock-names = "fimc", "sclk_fimc"; power-domains = <&pd_cam>; @@ -227,7 +243,7 @@ fimc_3: fimc@11830000 { compatible = "samsung,exynos4210-fimc"; reg = <0x11830000 0x1000>; - interrupts = <0 87 0>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>; clock-names = "fimc", "sclk_fimc"; power-domains = <&pd_cam>; @@ -239,7 +255,7 @@ csis_0: csis@11880000 { compatible = "samsung,exynos4210-csis"; reg = <0x11880000 0x4000>; - interrupts = <0 78 0>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>; clock-names = "csis", "sclk_csis"; bus-width = <4>; @@ -254,7 +270,7 @@ csis_1: csis@11890000 { compatible = "samsung,exynos4210-csis"; reg = <0x11890000 0x4000>; - interrupts = <0 80 0>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>; clock-names = "csis", "sclk_csis"; bus-width = <2>; @@ -270,7 +286,7 @@ watchdog: watchdog@10060000 { compatible = "samsung,s3c2410-wdt"; reg = <0x10060000 0x100>; - interrupts = <0 43 0>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_WDT>; clock-names = "watchdog"; status = "disabled"; @@ -280,7 +296,8 @@ compatible = "samsung,s3c6410-rtc"; reg = <0x10070000 0x100>; interrupt-parent = <&pmu_system_controller>; - interrupts = <0 44 0>, <0 45 0>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_RTC>; clock-names = "rtc"; status = "disabled"; @@ -289,7 +306,7 @@ keypad: keypad@100A0000 { compatible = "samsung,s5pv210-keypad"; reg = <0x100A0000 0x100>; - interrupts = <0 109 0>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_KEYIF>; clock-names = "keypad"; status = "disabled"; @@ -298,7 +315,7 @@ sdhci_0: sdhci@12510000 { compatible = "samsung,exynos4210-sdhci"; reg = <0x12510000 0x100>; - interrupts = <0 73 0>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>; clock-names = "hsmmc", "mmc_busclk.2"; status = "disabled"; @@ -307,7 +324,7 @@ sdhci_1: sdhci@12520000 { compatible = "samsung,exynos4210-sdhci"; reg = <0x12520000 0x100>; - interrupts = <0 74 0>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>; clock-names = "hsmmc", "mmc_busclk.2"; status = "disabled"; @@ -316,7 +333,7 @@ sdhci_2: sdhci@12530000 { compatible = "samsung,exynos4210-sdhci"; reg = <0x12530000 0x100>; - interrupts = <0 75 0>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>; clock-names = "hsmmc", "mmc_busclk.2"; status = "disabled"; @@ -325,7 +342,7 @@ sdhci_3: sdhci@12540000 { compatible = "samsung,exynos4210-sdhci"; reg = <0x12540000 0x100>; - interrupts = <0 76 0>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>; clock-names = "hsmmc", "mmc_busclk.2"; status = "disabled"; @@ -344,7 +361,7 @@ hsotg: hsotg@12480000 { compatible = "samsung,s3c6400-hsotg"; reg = <0x12480000 0x20000>; - interrupts = <0 71 0>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_USB_DEVICE>; clock-names = "otg"; phys = <&exynos_usbphy 0>; @@ -355,42 +372,42 @@ ehci: ehci@12580000 { compatible = "samsung,exynos4210-ehci"; reg = <0x12580000 0x100>; - interrupts = <0 70 0>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_USB_HOST>; clock-names = "usbhost"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; port@0 { - reg = <0>; - phys = <&exynos_usbphy 1>; - status = "disabled"; + reg = <0>; + phys = <&exynos_usbphy 1>; + status = "disabled"; }; port@1 { - reg = <1>; - phys = <&exynos_usbphy 2>; - status = "disabled"; + reg = <1>; + phys = <&exynos_usbphy 2>; + status = "disabled"; }; port@2 { - reg = <2>; - phys = <&exynos_usbphy 3>; - status = "disabled"; + reg = <2>; + phys = <&exynos_usbphy 3>; + status = "disabled"; }; }; ohci: ohci@12590000 { compatible = "samsung,exynos4210-ohci"; reg = <0x12590000 0x100>; - interrupts = <0 70 0>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_USB_HOST>; clock-names = "usbhost"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; port@0 { - reg = <0>; - phys = <&exynos_usbphy 1>; - status = "disabled"; + reg = <0>; + phys = <&exynos_usbphy 1>; + status = "disabled"; }; }; @@ -423,7 +440,7 @@ mfc: codec@13400000 { compatible = "samsung,mfc-v5"; reg = <0x13400000 0x10000>; - interrupts = <0 94 0>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_mfc>; clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>; clock-names = "mfc", "sclk_mfc"; @@ -434,7 +451,7 @@ serial_0: serial@13800000 { compatible = "samsung,exynos4210-uart"; reg = <0x13800000 0x100>; - interrupts = <0 52 0>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; dmas = <&pdma0 15>, <&pdma0 16>; @@ -445,7 +462,7 @@ serial_1: serial@13810000 { compatible = "samsung,exynos4210-uart"; reg = <0x13810000 0x100>; - interrupts = <0 53 0>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; dmas = <&pdma1 15>, <&pdma1 16>; @@ -456,7 +473,7 @@ serial_2: serial@13820000 { compatible = "samsung,exynos4210-uart"; reg = <0x13820000 0x100>; - interrupts = <0 54 0>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; dmas = <&pdma0 17>, <&pdma0 18>; @@ -467,7 +484,7 @@ serial_3: serial@13830000 { compatible = "samsung,exynos4210-uart"; reg = <0x13830000 0x100>; - interrupts = <0 55 0>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; dmas = <&pdma1 17>, <&pdma1 18>; @@ -480,7 +497,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x13860000 0x100>; - interrupts = <0 58 0>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_I2C0>; clock-names = "i2c"; pinctrl-names = "default"; @@ -493,7 +510,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x13870000 0x100>; - interrupts = <0 59 0>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_I2C1>; clock-names = "i2c"; pinctrl-names = "default"; @@ -506,7 +523,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x13880000 0x100>; - interrupts = <0 60 0>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_I2C2>; clock-names = "i2c"; pinctrl-names = "default"; @@ -519,7 +536,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x13890000 0x100>; - interrupts = <0 61 0>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_I2C3>; clock-names = "i2c"; pinctrl-names = "default"; @@ -532,7 +549,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x138A0000 0x100>; - interrupts = <0 62 0>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_I2C4>; clock-names = "i2c"; pinctrl-names = "default"; @@ -545,7 +562,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x138B0000 0x100>; - interrupts = <0 63 0>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_I2C5>; clock-names = "i2c"; pinctrl-names = "default"; @@ -558,7 +575,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x138C0000 0x100>; - interrupts = <0 64 0>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_I2C6>; clock-names = "i2c"; pinctrl-names = "default"; @@ -571,7 +588,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x138D0000 0x100>; - interrupts = <0 65 0>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_I2C7>; clock-names = "i2c"; pinctrl-names = "default"; @@ -584,7 +601,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-hdmiphy-i2c"; reg = <0x138E0000 0x100>; - interrupts = <0 93 0>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_I2C_HDMI>; clock-names = "i2c"; status = "disabled"; @@ -598,7 +615,7 @@ spi_0: spi@13920000 { compatible = "samsung,exynos4210-spi"; reg = <0x13920000 0x100>; - interrupts = <0 66 0>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma0 7>, <&pdma0 6>; dma-names = "tx", "rx"; #address-cells = <1>; @@ -613,7 +630,7 @@ spi_1: spi@13930000 { compatible = "samsung,exynos4210-spi"; reg = <0x13930000 0x100>; - interrupts = <0 67 0>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma1 7>, <&pdma1 6>; dma-names = "tx", "rx"; #address-cells = <1>; @@ -628,7 +645,7 @@ spi_2: spi@13940000 { compatible = "samsung,exynos4210-spi"; reg = <0x13940000 0x100>; - interrupts = <0 68 0>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma0 9>, <&pdma0 8>; dma-names = "tx", "rx"; #address-cells = <1>; @@ -643,7 +660,11 @@ pwm: pwm@139D0000 { compatible = "samsung,exynos4210-pwm"; reg = <0x139D0000 0x1000>; - interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PWM>; clock-names = "timers"; #pwm-cells = <3>; @@ -660,7 +681,7 @@ pdma0: pdma@12680000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x12680000 0x1000>; - interrupts = <0 35 0>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -671,7 +692,7 @@ pdma1: pdma@12690000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x12690000 0x1000>; - interrupts = <0 36 0>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -682,7 +703,7 @@ mdma1: mdma@12850000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x12850000 0x1000>; - interrupts = <0 34 0>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_MDMA>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -712,7 +733,7 @@ jpeg_codec: jpeg-codec@11840000 { compatible = "samsung,exynos4210-jpeg"; reg = <0x11840000 0x1000>; - interrupts = <0 88 0>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_JPEG>; clock-names = "jpeg"; power-domains = <&pd_cam>; @@ -722,7 +743,7 @@ rotator: rotator@12810000 { compatible = "samsung,exynos4210-rotator"; reg = <0x12810000 0x64>; - interrupts = <0 83 0>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_ROTATOR>; clock-names = "rotator"; iommus = <&sysmmu_rotator>; @@ -731,7 +752,7 @@ hdmi: hdmi@12D00000 { compatible = "samsung,exynos4210-hdmi"; reg = <0x12D00000 0x70000>; - interrupts = <0 92 0>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", "mout_hdmi"; clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, @@ -746,7 +767,7 @@ hdmicec: cec@100B0000 { compatible = "samsung,s5p-cec"; reg = <0x100B0000 0x200>; - interrupts = <0 114 0>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_HDMI_CEC>; clock-names = "hdmicec"; samsung,syscon-phandle = <&pmu_system_controller>; @@ -757,7 +778,7 @@ mixer: mixer@12C10000 { compatible = "samsung,exynos4210-mixer"; - interrupts = <0 91 0>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; reg = <0x12C10000 0x2100>, <0x12c00000 0x300>; power-domains = <&pd_tv>; iommus = <&sysmmu_tv>; @@ -984,7 +1005,7 @@ sss: sss@10830000 { compatible = "samsung,exynos4210-secss"; reg = <0x10830000 0x300>; - interrupts = <0 112 0>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_SSS>; clock-names = "secss"; }; diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index d9b6d25e4abe..f280954b260a 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -537,8 +537,14 @@ interrupt-controller; interrupt-parent = <&gic>; - interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; }; @@ -548,8 +554,14 @@ interrupt-controller; interrupt-parent = <&gic>; - interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 2d9b02967105..f9408188f97f 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -86,6 +86,7 @@ compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; #power-domain-cells = <0>; + label = "LCD1"; }; l2c: l2-cache-controller@10502000 { @@ -109,12 +110,12 @@ #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = <0 &gic 0 57 0>, - <1 &gic 0 69 0>, + interrupt-map = <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>, + <1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>, <2 &combiner 12 6>, <3 &combiner 12 7>, - <4 &gic 0 42 0>, - <5 &gic 0 48 0>; + <4 &gic 0 42 IRQ_TYPE_LEVEL_HIGH>, + <5 &gic 0 48 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -127,18 +128,18 @@ pinctrl_0: pinctrl@11400000 { compatible = "samsung,exynos4210-pinctrl"; reg = <0x11400000 0x1000>; - interrupts = <0 47 0>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_1: pinctrl@11000000 { compatible = "samsung,exynos4210-pinctrl"; reg = <0x11000000 0x1000>; - interrupts = <0 46 0>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; wakup_eint: wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; interrupt-parent = <&gic>; - interrupts = <0 32 0>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -182,7 +183,7 @@ g2d: g2d@12800000 { compatible = "samsung,s5pv210-g2d"; reg = <0x12800000 0x1000>; - interrupts = <0 89 0>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>; clock-names = "sclk_fimg2d", "fimg2d"; power-domains = <&pd_lcd0>; @@ -424,10 +425,22 @@ &combiner { samsung,combiner-nr = <16>; - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; }; &mdma1 { diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi deleted file mode 100644 index 538901123d37..000000000000 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Samsung's Exynos4212 SoC device tree source - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Samsung's Exynos4212 SoC device nodes are listed in this file. Exynos4212 - * based board files can include this file and provide values for board specfic - * bindings. - * - * Note: This file does not include device nodes for all the controllers in - * Exynos4212 SoC. As device tree coverage for Exynos4212 increases, additional - * nodes can be added to this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include "exynos4x12.dtsi" - -/ { - compatible = "samsung,exynos4212", "samsung,exynos4"; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@A00 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0xA00>; - clocks = <&clock CLK_ARM_CLK>; - clock-names = "cpu"; - operating-points-v2 = <&cpu0_opp_table>; - cooling-min-level = <13>; - cooling-max-level = <7>; - #cooling-cells = <2>; /* min followed by max */ - }; - - cpu@A01 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0xA01>; - operating-points-v2 = <&cpu0_opp_table>; - }; - }; - - cpu0_opp_table: opp_table0 { - compatible = "operating-points-v2"; - opp-shared; - - opp00 { - opp-hz = /bits/ 64 <200000000>; - opp-microvolt = <900000>; - clock-latency-ns = <200000>; - }; - opp01 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <900000>; - clock-latency-ns = <200000>; - }; - opp02 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <925000>; - clock-latency-ns = <200000>; - }; - opp03 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <950000>; - clock-latency-ns = <200000>; - }; - opp04 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <975000>; - clock-latency-ns = <200000>; - }; - opp05 { - opp-hz = /bits/ 64 <700000000>; - opp-microvolt = <987500>; - clock-latency-ns = <200000>; - }; - opp06 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <1000000>; - clock-latency-ns = <200000>; - }; - opp07 { - opp-hz = /bits/ 64 <900000000>; - opp-microvolt = <1037500>; - clock-latency-ns = <200000>; - }; - opp08 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <1087500>; - clock-latency-ns = <200000>; - }; - opp09 { - opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <1137500>; - clock-latency-ns = <200000>; - }; - opp10 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1187500>; - clock-latency-ns = <200000>; - }; - opp11 { - opp-hz = /bits/ 64 <1300000000>; - opp-microvolt = <1250000>; - clock-latency-ns = <200000>; - }; - opp12 { - opp-hz = /bits/ 64 <1400000000>; - opp-microvolt = <1287500>; - clock-latency-ns = <200000>; - }; - opp13 { - opp-hz = /bits/ 64 <1500000000>; - opp-microvolt = <1350000>; - clock-latency-ns = <200000>; - turbo-mode; - }; - }; -}; - -&combiner { - samsung,combiner-nr = <18>; -}; - -&gic { - cpu-offset = <0x8000>; -}; diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts new file mode 100644 index 000000000000..d66093084dbb --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts @@ -0,0 +1,235 @@ +/* + * TOPEET's Exynos4412 based itop board device tree source + * + * Copyright (c) 2016 SUMOMO Computer Association + * https://www.sumomo.mobi + * Randy Li <ayaka@soulik.info> + * + * Device tree source file for TOPEET iTop Exynos 4412 core board + * which is based on Samsung's Exynos4412 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/sound/samsung-i2s.h> +#include "exynos4412-itop-scp-core.dtsi" + +/ { + model = "TOPEET iTop 4412 Elite board based on Exynos4412"; + compatible = "topeet,itop4412-elite", "samsung,exynos4412", "samsung,exynos4"; + + chosen { + bootargs = "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootdelay=1 rootwait"; + stdout-path = "serial2:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led2 { + label = "red:system"; + gpios = <&gpx1 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + + led3 { + label = "red:user"; + gpios = <&gpk1 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + home { + label = "GPIO Key Home"; + linux,code = <KEY_HOME>; + gpios = <&gpx1 1 GPIO_ACTIVE_LOW>; + }; + + back { + label = "GPIO Key Back"; + linux,code = <KEY_BACK>; + gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; + }; + + sleep { + label = "GPIO Key Sleep"; + linux,code = <KEY_POWER>; + gpios = <&gpx3 3 GPIO_ACTIVE_LOW>; + }; + + vol-up { + label = "GPIO Key Vol+"; + linux,code = <KEY_UP>; + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; + }; + + vol-down { + label = "GPIO Key Vol-"; + linux,code = <KEY_DOWN>; + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "wm-sound"; + + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&link0_codec>; + simple-audio-card,frame-master = <&link0_codec>; + + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Line", "Line In", + "Line", "Line Out", + "Speaker", "Speaker", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Speaker", "SPK_LP", + "Speaker", "SPK_LN", + "Speaker", "SPK_RP", + "Speaker", "SPK_RN", + "LINPUT1", "Mic Jack", + "LINPUT3", "Mic Jack", + "RINPUT1", "Mic Jack", + "RINPUT2", "Mic Jack"; + + simple-audio-card,cpu { + sound-dai = <&i2s0 0>; + }; + + link0_codec: simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&i2s0 CLK_I2S_CDCLK>; + system-clock-frequency = <11289600>; + }; + }; + + beep { + compatible = "pwm-beeper"; + pwms = <&pwm 0 4000000 PWM_POLARITY_INVERTED>; + }; + + camera: camera { + pinctrl-0 = <&cam_port_a_clk_active>; + pinctrl-names = "default"; + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_CAM0>; + assigned-clock-parents = <&clock CLK_XUSBXTI>; + }; +}; + +&adc { + vdd-supply = <&ldo3_reg>; + status = "okay"; +}; + +&clock_audss { + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>, + <&clock_audss EXYNOS_DOUT_SRP>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>; + assigned-clock-parents = <&clock CLK_FOUT_EPLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>; + assigned-clock-rates = <0>, <0>, <112896000>, <11289600>; +}; + +&ehci { + status = "okay"; + /* In order to reset USB ethernet */ + samsung,vbus-gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; + + port@0 { + status = "okay"; + }; + + port@2 { + status = "okay"; + }; +}; + +&exynos_usbphy { + status = "okay"; +}; + +&fimc_0 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC0>, + <&clock CLK_SCLK_FIMC0>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; + +&hsotg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&i2c_4 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c4_bus>; + pinctrl-names = "default"; + status = "okay"; + + codec: wm8960@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&pmu_system_controller 0>; + clock-names = "MCLK1"; + wlf,shared-lrclk; + #sound-dai-cells = <0>; + }; +}; + +&i2s0 { + pinctrl-0 = <&i2s0_bus>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pinctrl_1 { + ether-reset { + samsung,pins = "gpc0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; +}; + +&pwm { + status = "okay"; + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + samsung,pwm-outputs = <0>; +}; + +&sdhci_2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; + pinctrl-names = "default"; + cd-gpio = <&gpx0 7 GPIO_ACTIVE_LOW>; + cap-sd-highspeed; + vmmc-supply = <&ldo23_reg>; + vqmmc-supply = <&ldo17_reg>; + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi new file mode 100644 index 000000000000..a36cd36a26b8 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi @@ -0,0 +1,501 @@ +/* + * TOPEET's Exynos4412 based itop board device tree source + * + * Copyright (c) 2016 SUMOMO Computer Association + * https://www.sumomo.mobi + * Randy Li <ayaka@soulik.info> + * + * Device tree source file for TOPEET iTop Exynos 4412 SCP package core + * board which is based on Samsung's Exynos4412 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/clock/samsung,s2mps11.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "exynos4412.dtsi" +#include "exynos4412-ppmu-common.dtsi" +#include "exynos-mfc-reserved-memory.dtsi" + +/ { + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x40000000>; + }; + + firmware@0203F000 { + compatible = "samsung,secure-firmware"; + reg = <0x0203F000 0x1000>; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>; + }; + }; + }; + }; + + usb-hub { + compatible = "smsc,usb3503a"; + reset-gpios = <&gpm2 4 GPIO_ACTIVE_LOW>; + connect-gpios = <&gpm3 3 GPIO_ACTIVE_HIGH>; + intn-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsic_reset>; + }; +}; + +&bus_dmc { + devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; + vdd-supply = <&buck1_reg>; + status = "okay"; +}; + +&bus_acp { + devfreq = <&bus_dmc>; + status = "okay"; +}; + +&bus_c2c { + devfreq = <&bus_dmc>; + status = "okay"; +}; + +&bus_leftbus { + devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; + vdd-supply = <&buck3_reg>; + status = "okay"; +}; + +&bus_rightbus { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_fsys { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_peri { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_mfc { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + +&hsotg { + vusb_d-supply = <&ldo15_reg>; + vusb_a-supply = <&ldo12_reg>; +}; + +&i2c_1 { + #address-cells = <1>; + #size-cells = <0>; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c1_bus>; + pinctrl-names = "default"; + status = "okay"; + + s5m8767: s5m8767-pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + s5m8767,pmic-buck-default-dvs-idx = <3>; + + s5m8767,pmic-buck-dvs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>, + <&gpb 6 GPIO_ACTIVE_HIGH>, + <&gpb 7 GPIO_ACTIVE_HIGH>; + + s5m8767,pmic-buck-ds-gpios = <&gpm3 5 GPIO_ACTIVE_HIGH>, + <&gpm3 6 GPIO_ACTIVE_HIGH>, + <&gpm3 7 GPIO_ACTIVE_HIGH>; + + /* VDD_ARM */ + s5m8767,pmic-buck2-dvs-voltage = <1356250>, <1300000>, + <1243750>, <1118750>, + <1068750>, <1012500>, + <956250>, <900000>; + /* VDD_INT */ + s5m8767,pmic-buck3-dvs-voltage = <1000000>, <1000000>, + <925000>, <925000>, + <887500>, <887500>, + <850000>, <850000>; + /* VDD_G3D */ + s5m8767,pmic-buck4-dvs-voltage = <1081250>, <1081250>, + <1025000>, <950000>, + <918750>, <900000>, + <875000>, <831250>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + /* SCP uses 1.5v, POP uses 1.2v */ + ldo2_reg: LDO2 { + regulator-name = "VDDQ_M12"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo3_reg: LDO3 { + regulator-name = "VDDIOAP_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo4_reg: LDO4 { + regulator-name = "VDDQ_PRE"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo5_reg: LDO5 { + regulator-name = "VDD_LDO5"; + op_mode = <0>; /* Always off Mode */ + }; + + ldo6_reg: LDO6 { + regulator-name = "VDD10_MPLL"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD10_XPLL"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo8_reg: LDO8 { + regulator-name = "VDD10_MIPI"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo9_reg: LDO9 { + regulator-name = "VDD33_LCD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD18_MIPI"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD18_ABB1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo12_reg: LDO12 { + regulator-name = "VDD33_UOTG"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo13_reg: LDO13 { + regulator-name = "VDDIOPERI_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo14_reg: LDO14 { + regulator-name = "VDD18_ABB02"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo15_reg: LDO15 { + regulator-name = "VDD10_USH"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo16_reg: LDO16 { + regulator-name = "VDD18_HSIC"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo17_reg: LDO17 { + regulator-name = "VDDIOAP_MMC012_28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <1>; /* Normal Mode */ + }; + + /* Used by HSIC */ + ldo18_reg: LDO18 { + regulator-name = "VDDIOPERI_28"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo19_reg: LDO19 { + regulator-name = "VDD_LDO19"; + op_mode = <0>; /* Always off Mode */ + }; + + ldo20_reg: LDO20 { + regulator-name = "VDD28_CAM"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo21_reg: LDO21 { + regulator-name = "VDD28_AF"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo22_reg: LDO22 { + regulator-name = "VDDA28_2M"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo23_reg: LDO23 { + regulator-name = "VDD28_TF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo24_reg: LDO24 { + regulator-name = "VDD33_A31"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo25_reg: LDO25 { + regulator-name = "VDD18_CAM"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo26_reg: LDO26 { + regulator-name = "VDD18_A31"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo27_reg: LDO27 { + regulator-name = "GPS_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo28_reg: LDO28 { + regulator-name = "DVDD12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + op_mode = <1>; /* Normal Mode */ + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1456250>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <875000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_m12"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd12_5m"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck7_reg: BUCK7 { + regulator-name = "pvdd_buck7"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <2000000>; + regulator-boot-on; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck8_reg: BUCK8 { + regulator-name = "pvdd_buck8"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck9_reg: BUCK9 { + regulator-name = "vddf28_emmc"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3000000>; + op_mode = <1>; /* Normal Mode */ + }; + }; + + s5m8767_osc: clocks { + #clock-cells = <1>; + clock-output-names = "s5m8767_ap", + "s5m8767_cp", "s5m8767_bt"; + }; + + }; +}; + +&mfc { + status = "okay"; +}; + +&mshc_0 { + pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; + pinctrl-names = "default"; + status = "okay"; + vmmc-supply = <&buck9_reg>; + num-slots = <1>; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + bus-width = <8>; + cap-mmc-highspeed; +}; + +&pinctrl_1 { + hsic_reset: hsic-reset { + samsung,pins = "gpm2-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; +}; + +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>; + clock-names = "rtc", "rtc_src"; +}; + +&tmu { + vtmu-supply = <&ldo16_reg>; + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 8aa19ba14436..78f118cb73d4 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -43,16 +43,6 @@ sound: sound { compatible = "simple-audio-card"; - assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, - <&clock_audss EXYNOS_MOUT_I2S>, - <&clock_audss EXYNOS_DOUT_SRP>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>; - assigned-clock-parents = <&clock CLK_FOUT_EPLL>, - <&clock_audss EXYNOS_MOUT_AUDSS>; - assigned-clock-rates = <0>, - <0>, - <192000000>, - <19200000>; simple-audio-card,format = "i2s"; simple-audio-card,bitclock-master = <&link0_codec>; @@ -97,11 +87,11 @@ thermal-zones { cpu_thermal: cpu-thermal { cooling-maps { - map0 { + cooling_map0: map0 { /* Corresponds to 800MHz at freq_table */ cooling-device = <&cpu0 7 7>; }; - map1 { + cooling_map1: map1 { /* Corresponds to 200MHz at freq_table */ cooling-device = <&cpu0 13 13>; }; @@ -157,6 +147,16 @@ status = "okay"; }; +&clock_audss { + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>, + <&clock_audss EXYNOS_DOUT_SRP>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>; + assigned-clock-parents = <&clock CLK_FOUT_EPLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>; + assigned-clock-rates = <0>, <0>, <192000000>, <19200000>; +}; + &cpu0 { cpu0-supply = <&buck2_reg>; }; @@ -503,10 +503,6 @@ pinctrl-0 = <&i2s0_bus>; pinctrl-names = "default"; status = "okay"; - clocks = <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>, - <&clock_audss EXYNOS_SCLK_I2S>; - clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; }; &mixer { diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 99634c54dca9..7504a5aa538e 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -13,6 +13,7 @@ /dts-v1/; #include "exynos4412-odroid-common.dtsi" +#include "exynos4412-prime.dtsi" / { model = "Hardkernel ODROID-U3 board based on Exynos4412"; @@ -47,11 +48,11 @@ cooling-maps { map0 { trip = <&cpu_alert1>; - cooling-device = <&cpu0 7 7>; + cooling-device = <&cpu0 9 9>; }; map1 { trip = <&cpu_alert2>; - cooling-device = <&cpu0 13 13>; + cooling-device = <&cpu0 15 15>; }; map2 { trip = <&cpu_alert0>; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 61906b35ea7a..46b931eec228 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -64,6 +64,11 @@ }; }; +&adc { + vdd-supply = <&ldo10_reg>; + status = "okay"; +}; + /* VDDQ for MSHC (eMMC card) */ &buck8_reg { regulator-name = "BUCK8_VDDQ_MMC4_2.8V"; @@ -95,3 +100,16 @@ &serial_3 { status = "okay"; }; + +&sound { + simple-audio-card,name = "Odroid-X"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Microphone", "Mic Jack", + "Microphone", "DMIC"; + simple-audio-card,routing = + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "IN1", "Mic Jack", + "Mic Jack", "MICBIAS"; +}; diff --git a/arch/arm/boot/dts/exynos4412-odroidx2.dts b/arch/arm/boot/dts/exynos4412-odroidx2.dts index 4d228858f172..d867b2ee95ca 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx2.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx2.dts @@ -12,6 +12,7 @@ */ #include "exynos4412-odroidx.dts" +#include "exynos4412-prime.dtsi" / { model = "Hardkernel ODROID-X2 board based on Exynos4412"; @@ -22,27 +23,3 @@ reg = <0x40000000 0x7FF00000>; }; }; - -/* VDDQ for MSHC (eMMC card) */ -&buck8_reg { - regulator-name = "BUCK8_VDDQ_MMC4_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; -}; - -&mshc_0 { - vqmmc-supply = <&buck8_reg>; -}; - -&sound { - simple-audio-card,name = "Odroid-X2"; - simple-audio-card,widgets = - "Headphone", "Headphone Jack", - "Microphone", "Mic Jack", - "Microphone", "DMIC"; - simple-audio-card,routing = - "Headphone Jack", "HPL", - "Headphone Jack", "HPR", - "IN1", "Mic Jack", - "Mic Jack", "MICBIAS"; -}; diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi index a56bf9b1a412..1d27c28564e4 100644 --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi @@ -1,10 +1,10 @@ /* - * Samsung's Exynos4x12 SoCs pin-mux and pin-config device tree source + * Samsung's Exynos4412 SoCs pin-mux and pin-config device tree source * * Copyright (c) 2012 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * Samsung's Exynos4x12 SoCs pin-mux and pin-config optiosn are listed as device + * Samsung's Exynos4412 SoCs pin-mux and pin-config optiosn are listed as device * tree nodes are listed in this file. * * This program is free software; you can redistribute it and/or modify @@ -572,8 +572,14 @@ interrupt-controller; interrupt-parent = <&gic>; - interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; }; @@ -583,8 +589,14 @@ interrupt-controller; interrupt-parent = <&gic>; - interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; }; diff --git a/arch/arm/boot/dts/exynos4412-prime.dtsi b/arch/arm/boot/dts/exynos4412-prime.dtsi new file mode 100644 index 000000000000..e75bc170c89c --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-prime.dtsi @@ -0,0 +1,41 @@ +/* + * Samsung's Exynos4412 Prime SoC device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Exynos4412 Prime SoC revision supports higher CPU frequencies than + * non-Prime version. Therefore we need to update OPPs table and + * thermal maps accordingly. + */ + +&cpu0_opp_1500 { + /delete-property/turbo-mode; +}; + +&cpu0_opp_table { + opp@1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <1350000>; + clock-latency-ns = <200000>; + }; + opp@1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <1350000>; + clock-latency-ns = <200000>; + }; +}; + +&cooling_map0 { + cooling-device = <&cpu0 9 9>; +}; + +&cooling_map1 { + cooling-device = <&cpu0 15 15>; +}; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 40beede46e55..235bbb69ad7c 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -17,11 +17,23 @@ * published by the Free Software Foundation. */ -#include "exynos4x12.dtsi" +#include "exynos4.dtsi" +#include "exynos4412-pinctrl.dtsi" +#include "exynos4-cpu-thermal.dtsi" / { compatible = "samsung,exynos4412", "samsung,exynos4"; + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + pinctrl3 = &pinctrl_3; + fimc-lite0 = &fimc_lite_0; + fimc-lite1 = &fimc_lite_1; + mshc0 = &mshc_0; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -130,7 +142,7 @@ opp-microvolt = <1287500>; clock-latency-ns = <200000>; }; - opp@1500000000 { + cpu0_opp_1500: opp@1500000000 { opp-hz = /bits/ 64 <1500000000>; opp-microvolt = <1350000>; clock-latency-ns = <200000>; @@ -138,19 +150,573 @@ }; }; + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x40000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@2f000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x2f000 0x1000>; + }; + }; + + pd_isp: isp-power-domain@10023CA0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023CA0 0x20>; + #power-domain-cells = <0>; + label = "ISP"; + }; + + l2c: l2-cache-controller@10502000 { + compatible = "arm,pl310-cache"; + reg = <0x10502000 0x1000>; + cache-unified; + cache-level = <2>; + arm,tag-latency = <2 2 1>; + arm,data-latency = <3 2 1>; + arm,double-linefill = <1>; + arm,double-linefill-incr = <0>; + arm,double-linefill-wrap = <1>; + arm,prefetch-drop = <1>; + arm,prefetch-offset = <7>; + }; + + clock: clock-controller@10030000 { + compatible = "samsung,exynos4412-clock"; + reg = <0x10030000 0x20000>; + #clock-cells = <1>; + }; + + mct@10050000 { + compatible = "samsung,exynos4412-mct"; + reg = <0x10050000 0x800>; + interrupt-parent = <&mct_map>; + interrupts = <0>, <1>, <2>, <3>, <4>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; + clock-names = "fin_pll", "mct"; + + mct_map: mct-map { + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>, + <1 &combiner 12 5>, + <2 &combiner 12 6>, + <3 &combiner 12 7>, + <4 &gic 1 12 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + adc: adc@126C0000 { + compatible = "samsung,exynos-adc-v1"; + reg = <0x126C0000 0x100>; + interrupt-parent = <&combiner>; + interrupts = <10 3>; + clocks = <&clock CLK_TSADC>; + clock-names = "adc"; + #io-channel-cells = <1>; + io-channel-ranges; + samsung,syscon-phandle = <&pmu_system_controller>; + status = "disabled"; + }; + + g2d: g2d@10800000 { + compatible = "samsung,exynos4212-g2d"; + reg = <0x10800000 0x1000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>; + clock-names = "sclk_fimg2d", "fimg2d"; + iommus = <&sysmmu_g2d>; + }; + + camera { + clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>, + <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>; + clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; + + /* fimc_[0-3] are configured outside, under phandles */ + fimc_lite_0: fimc-lite@12390000 { + compatible = "samsung,exynos4212-fimc-lite"; + reg = <0x12390000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_isp>; + clocks = <&clock CLK_FIMC_LITE0>; + clock-names = "flite"; + iommus = <&sysmmu_fimc_lite0>; + status = "disabled"; + }; + + fimc_lite_1: fimc-lite@123A0000 { + compatible = "samsung,exynos4212-fimc-lite"; + reg = <0x123A0000 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_isp>; + clocks = <&clock CLK_FIMC_LITE1>; + clock-names = "flite"; + iommus = <&sysmmu_fimc_lite1>; + status = "disabled"; + }; + + fimc_is: fimc-is@12000000 { + compatible = "samsung,exynos4212-fimc-is"; + reg = <0x12000000 0x260000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_isp>; + clocks = <&clock CLK_FIMC_LITE0>, + <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>, + <&clock CLK_PPMUISPMX>, + <&clock CLK_MOUT_MPLL_USER_T>, + <&clock CLK_FIMC_ISP>, <&clock CLK_FIMC_DRC>, + <&clock CLK_FIMC_FD>, <&clock CLK_MCUISP>, + <&clock CLK_GICISP>, <&clock CLK_MCUCTL_ISP>, + <&clock CLK_PWM_ISP>, + <&clock CLK_DIV_ISP0>, <&clock CLK_DIV_ISP1>, + <&clock CLK_DIV_MCUISP0>, + <&clock CLK_DIV_MCUISP1>, + <&clock CLK_UART_ISP_SCLK>, + <&clock CLK_ACLK200>, <&clock CLK_DIV_ACLK200>, + <&clock CLK_ACLK400_MCUISP>, + <&clock CLK_DIV_ACLK400_MCUISP>; + clock-names = "lite0", "lite1", "ppmuispx", + "ppmuispmx", "mpll", "isp", + "drc", "fd", "mcuisp", + "gicisp", "mcuctl_isp", "pwm_isp", + "ispdiv0", "ispdiv1", "mcuispdiv0", + "mcuispdiv1", "uart", "aclk200", + "div_aclk200", "aclk400mcuisp", + "div_aclk400mcuisp"; + iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>, + <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; + iommu-names = "isp", "drc", "fd", "mcuctl"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + pmu@10020000 { + reg = <0x10020000 0x3000>; + }; + + i2c1_isp: i2c-isp@12140000 { + compatible = "samsung,exynos4212-i2c-isp"; + reg = <0x12140000 0x100>; + clocks = <&clock CLK_I2C1_ISP>; + clock-names = "i2c_isp"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + mshc_0: mmc@12550000 { + compatible = "samsung,exynos4412-dw-mshc"; + reg = <0x12550000 0x1000>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <0x80>; + clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>; + clock-names = "biu", "ciu"; + status = "disabled"; + }; + + sysmmu_g2d: sysmmu@10A40000{ + compatible = "samsung,exynos-sysmmu"; + reg = <0x10A40000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 7>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_isp: sysmmu@12260000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12260000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 2>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_ISP>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_drc: sysmmu@12270000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12270000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 3>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_DRC>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_fd: sysmmu@122A0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x122A0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 4>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FD>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_mcuctl: sysmmu@122B0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x122B0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 5>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_ISPCX>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_lite0: sysmmu@123B0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x123B0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 0>; + power-domains = <&pd_isp>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_LITE0>, <&clock CLK_FIMC_LITE0>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_lite1: sysmmu@123C0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x123C0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 1>; + power-domains = <&pd_isp>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_LITE1>, <&clock CLK_FIMC_LITE1>; + #iommu-cells = <0>; + }; + + bus_dmc: bus_dmc { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_DMC>; + clock-names = "bus"; + operating-points-v2 = <&bus_dmc_opp_table>; + status = "disabled"; + }; + + bus_acp: bus_acp { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_ACP>; + clock-names = "bus"; + operating-points-v2 = <&bus_acp_opp_table>; + status = "disabled"; + }; + + bus_c2c: bus_c2c { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_C2C>; + clock-names = "bus"; + operating-points-v2 = <&bus_dmc_opp_table>; + status = "disabled"; + }; + + bus_dmc_opp_table: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <900000>; + }; + opp@134000000 { + opp-hz = /bits/ 64 <134000000>; + opp-microvolt = <900000>; + }; + opp@160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <900000>; + }; + opp@267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <950000>; + }; + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <1050000>; + }; + }; + + bus_acp_opp_table: opp_table2 { + compatible = "operating-points-v2"; + opp-shared; + + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + opp@134000000 { + opp-hz = /bits/ 64 <134000000>; + }; + opp@160000000 { + opp-hz = /bits/ 64 <160000000>; + }; + opp@267000000 { + opp-hz = /bits/ 64 <267000000>; + }; + }; + + bus_leftbus: bus_leftbus { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_GDL>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; + + bus_rightbus: bus_rightbus { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_GDR>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; + + bus_display: bus_display { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_ACLK160>; + clock-names = "bus"; + operating-points-v2 = <&bus_display_opp_table>; + status = "disabled"; + }; + + bus_fsys: bus_fsys { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_ACLK133>; + clock-names = "bus"; + operating-points-v2 = <&bus_fsys_opp_table>; + status = "disabled"; + }; + + bus_peri: bus_peri { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_ACLK100>; + clock-names = "bus"; + operating-points-v2 = <&bus_peri_opp_table>; + status = "disabled"; + }; + + bus_mfc: bus_mfc { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_SCLK_MFC>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; + + bus_leftbus_opp_table: opp_table3 { + compatible = "operating-points-v2"; + opp-shared; + + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <900000>; + }; + opp@134000000 { + opp-hz = /bits/ 64 <134000000>; + opp-microvolt = <925000>; + }; + opp@160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <950000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <1000000>; + }; + }; + + bus_display_opp_table: opp_table4 { + compatible = "operating-points-v2"; + opp-shared; + + opp@160000000 { + opp-hz = /bits/ 64 <160000000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + }; + + bus_fsys_opp_table: opp_table5 { + compatible = "operating-points-v2"; + opp-shared; + + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + opp@134000000 { + opp-hz = /bits/ 64 <134000000>; + }; + }; + + bus_peri_opp_table: opp_table6 { + compatible = "operating-points-v2"; + opp-shared; + + opp@50000000 { + opp-hz = /bits/ 64 <50000000>; + }; + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + }; + pmu { interrupts = <2 2>, <3 2>, <18 2>, <19 2>; }; }; -&pmu_system_controller { - compatible = "samsung,exynos4412-pmu", "syscon"; -}; - &combiner { samsung,combiner-nr = <20>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; +}; + +&exynos_usbphy { + compatible = "samsung,exynos4x12-usb2-phy"; + samsung,sysreg-phandle = <&sys_reg>; +}; + +&fimc_0 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,cam-if; +}; + +&fimc_1 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,cam-if; +}; + +&fimc_2 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,lcd-wb; + samsung,cam-if; +}; + +&fimc_3 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <1920 8192 1366 1920>; + samsung,rotators = <0>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,lcd-wb; }; &gic { cpu-offset = <0x4000>; }; + +&hdmi { + compatible = "samsung,exynos4212-hdmi"; +}; + +&jpeg_codec { + compatible = "samsung,exynos4212-jpeg"; +}; + +&rotator { + compatible = "samsung,exynos4212-rotator"; +}; + +&mixer { + compatible = "samsung,exynos4212-mixer"; + clock-names = "mixer", "hdmi", "sclk_hdmi", "vp"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>; +}; + +&pinctrl_0 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; +}; + +&pinctrl_1 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x11000000 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + + wakup_eint: wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&pinctrl_2 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x03860000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <10 0>; +}; + +&pinctrl_3 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x106E0000 0x1000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; +}; + +&pmu_system_controller { + compatible = "samsung,exynos4412-pmu", "syscon"; + clock-names = "clkout0", "clkout1", "clkout2", "clkout3", + "clkout4", "clkout8", "clkout9"; + clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, + <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, + <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>; + #clock-cells = <1>; +}; + +&tmu { + compatible = "samsung,exynos4412-tmu"; + interrupt-parent = <&combiner>; + interrupts = <2 4>; + reg = <0x100C0000 0x100>; + clocks = <&clock 383>; + clock-names = "tmu_apbif"; + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi b/arch/arm/boot/dts/exynos4415-pinctrl.dtsi deleted file mode 100644 index 76cfd872ead3..000000000000 --- a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi +++ /dev/null @@ -1,575 +0,0 @@ -/* - * Samsung's Exynos4415 SoCs pin-mux and pin-config device tree source - * - * Copyright (c) 2014 Samsung Electronics Co., Ltd. - * - * Samsung's Exynos4415 SoCs pin-mux and pin-config optiosn are listed as device - * tree nodes are listed in this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <dt-bindings/pinctrl/samsung.h> - -&pinctrl_0 { - gpa0: gpa0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpa1: gpa1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpb: gpb { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpc0: gpc0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpc1: gpc1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpd0: gpd0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpd1: gpd1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpf0: gpf0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpf1: gpf1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpf2: gpf2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - uart0_data: uart0-data { - samsung,pins = "gpa0-0", "gpa0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart0_fctl: uart0-fctl { - samsung,pins = "gpa0-2", "gpa0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart1_data: uart1-data { - samsung,pins = "gpa0-4", "gpa0-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart1_fctl: uart1-fctl { - samsung,pins = "gpa0-6", "gpa0-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart2_data: uart2-data { - samsung,pins = "gpa1-0", "gpa1-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart2_fctl: uart2-fctl { - samsung,pins = "gpa1-2", "gpa1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart3_data: uart3-data { - samsung,pins = "gpa1-4", "gpa1-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c2_bus: i2c2-bus { - samsung,pins = "gpa0-6", "gpa0-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c3_bus: i2c3-bus { - samsung,pins = "gpa1-2", "gpa1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - spi0_bus: spi0-bus { - samsung,pins = "gpb-0", "gpb-2", "gpb-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c4_bus: i2c4-bus { - samsung,pins = "gpb-0", "gpb-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - spi1_bus: spi1-bus { - samsung,pins = "gpb-4", "gpb-6", "gpb-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c5_bus: i2c5-bus { - samsung,pins = "gpb-2", "gpb-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2s1_bus: i2s1-bus { - samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", - "gpc0-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2s2_bus: i2s2-bus { - samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", - "gpc1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - pcm2_bus: pcm2-bus { - samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", - "gpc1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c6_bus: i2c6-bus { - samsung,pins = "gpc1-3", "gpc1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - spi2_bus: spi2-bus { - samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_5>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - pwm0_out: pwm0-out { - samsung,pins = "gpd0-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - pwm1_out: pwm1-out { - samsung,pins = "gpd0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - pwm2_out: pwm2-out { - samsung,pins = "gpd0-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - pwm3_out: pwm3-out { - samsung,pins = "gpd0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c7_bus: i2c7-bus { - samsung,pins = "gpd0-2", "gpd0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c0_bus: i2c0-bus { - samsung,pins = "gpd1-0", "gpd1-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c1_bus: i2c1-bus { - samsung,pins = "gpd1-2", "gpd1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; -}; - -&pinctrl_1 { - gpk0: gpk0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpk1: gpk1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpk2: gpk2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpk3: gpk3 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpl0: gpl0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpm0: gpm0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpm1: gpm1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpm2: gpm2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpm3: gpm3 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpm4: gpm4 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpx0: gpx0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - interrupt-parent = <&gic>; - interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>, - <0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>; - #interrupt-cells = <2>; - }; - - gpx1: gpx1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - interrupt-parent = <&gic>; - interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>, - <0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>; - #interrupt-cells = <2>; - }; - - gpx2: gpx2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpx3: gpx3 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - sd0_clk: sd0-clk { - samsung,pins = "gpk0-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd0_cmd: sd0-cmd { - samsung,pins = "gpk0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd0_cd: sd0-cd { - samsung,pins = "gpk0-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd0_rdqs: sd0-rdqs { - samsung,pins = "gpk0-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd0_bus1: sd0-bus-width1 { - samsung,pins = "gpk0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd0_bus4: sd0-bus-width4 { - samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd0_bus8: sd0-bus-width8 { - samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd1_clk: sd1-clk { - samsung,pins = "gpk1-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd1_cmd: sd1-cmd { - samsung,pins = "gpk1-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd1_cd: sd1-cd { - samsung,pins = "gpk1-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd1_bus1: sd1-bus-width1 { - samsung,pins = "gpk1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd1_bus4: sd1-bus-width4 { - samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd2_clk: sd2-clk { - samsung,pins = "gpk2-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd2_cmd: sd2-cmd { - samsung,pins = "gpk2-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd2_cd: sd2-cd { - samsung,pins = "gpk2-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd2_bus1: sd2-bus-width1 { - samsung,pins = "gpk2-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd2_bus4: sd2-bus-width4 { - samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - cam_port_b_io: cam-port-b-io { - samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", - "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", - "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - cam_port_b_clk_active: cam-port-b-clk-active { - samsung,pins = "gpm2-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - cam_port_b_clk_idle: cam-port-b-clk-idle { - samsung,pins = "gpm2-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - fimc_is_i2c0: fimc-is-i2c0 { - samsung,pins = "gpm4-0", "gpm4-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - fimc_is_i2c1: fimc-is-i2c1 { - samsung,pins = "gpm4-2", "gpm4-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - fimc_is_uart: fimc-is-uart { - samsung,pins = "gpm3-5", "gpm3-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; -}; - -&pinctrl_2 { - gpz: gpz { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - i2s0_bus: i2s0-bus { - samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", - "gpz-4", "gpz-5", "gpz-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; -}; diff --git a/arch/arm/boot/dts/exynos4415.dtsi b/arch/arm/boot/dts/exynos4415.dtsi deleted file mode 100644 index 3c40f8a956dd..000000000000 --- a/arch/arm/boot/dts/exynos4415.dtsi +++ /dev/null @@ -1,650 +0,0 @@ -/* - * Samsung's Exynos4415 SoC device tree source - * - * Copyright (c) 2014 Samsung Electronics Co., Ltd. - * - * Samsung's Exynos4415 SoC device nodes are listed in this file. Exynos4415 - * based board files can include this file and provide values for board - * specific bindings. - * - * Note: This file does not include device nodes for all the controllers in - * Exynos4415 SoC. As device tree coverage for Exynos4415 increases, additional - * nodes can be added to this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <dt-bindings/clock/exynos4415.h> -#include <dt-bindings/clock/exynos-audss-clk.h> - -/ { - compatible = "samsung,exynos4415"; - interrupt-parent = <&gic>; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - pinctrl0 = &pinctrl_0; - pinctrl1 = &pinctrl_1; - pinctrl2 = &pinctrl_2; - mshc0 = &mshc_0; - mshc1 = &mshc_1; - mshc2 = &mshc_2; - spi0 = &spi_0; - spi1 = &spi_1; - spi2 = &spi_2; - i2c0 = &i2c_0; - i2c1 = &i2c_1; - i2c2 = &i2c_2; - i2c3 = &i2c_3; - i2c4 = &i2c_4; - i2c5 = &i2c_5; - i2c6 = &i2c_6; - i2c7 = &i2c_7; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@a00 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0xa00>; - clock-frequency = <1600000000>; - }; - - cpu1: cpu@a01 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0xa01>; - clock-frequency = <1600000000>; - }; - - cpu2: cpu@a02 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0xa02>; - clock-frequency = <1600000000>; - }; - - cpu3: cpu@a03 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0xa03>; - clock-frequency = <1600000000>; - }; - }; - - soc: soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - sysram@02020000 { - compatible = "mmio-sram"; - reg = <0x02020000 0x50000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x02020000 0x50000>; - - smp-sysram@0 { - compatible = "samsung,exynos4210-sysram"; - reg = <0x0 0x1000>; - }; - - smp-sysram@4f000 { - compatible = "samsung,exynos4210-sysram-ns"; - reg = <0x4f000 0x1000>; - }; - }; - - pinctrl_2: pinctrl@03860000 { - compatible = "samsung,exynos4415-pinctrl"; - reg = <0x03860000 0x1000>; - interrupts = <0 242 0>; - }; - - chipid@10000000 { - compatible = "samsung,exynos4210-chipid"; - reg = <0x10000000 0x100>; - }; - - sysreg_system_controller: syscon@10010000 { - compatible = "samsung,exynos4-sysreg", "syscon"; - reg = <0x10010000 0x400>; - }; - - pmu_system_controller: system-controller@10020000 { - compatible = "samsung,exynos4415-pmu", "syscon"; - reg = <0x10020000 0x4000>; - }; - - mipi_phy: video-phy@10020710 { - compatible = "samsung,s5pv210-mipi-video-phy"; - #phy-cells = <1>; - syscon = <&pmu_system_controller>; - }; - - pd_cam: cam-power-domain@10024000 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10024000 0x20>; - #power-domain-cells = <0>; - }; - - pd_tv: tv-power-domain@10024020 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10024020 0x20>; - #power-domain-cells = <0>; - }; - - pd_mfc: mfc-power-domain@10024040 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10024040 0x20>; - #power-domain-cells = <0>; - }; - - pd_g3d: g3d-power-domain@10024060 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10024060 0x20>; - #power-domain-cells = <0>; - }; - - pd_lcd0: lcd0-power-domain@10024080 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10024080 0x20>; - #power-domain-cells = <0>; - }; - - pd_isp0: isp0-power-domain@100240A0 { - compatible = "samsung,exynos4210-pd"; - reg = <0x100240A0 0x20>; - #power-domain-cells = <0>; - }; - - pd_isp1: isp1-power-domain@100240E0 { - compatible = "samsung,exynos4210-pd"; - reg = <0x100240E0 0x20>; - #power-domain-cells = <0>; - }; - - cmu: clock-controller@10030000 { - compatible = "samsung,exynos4415-cmu"; - reg = <0x10030000 0x18000>; - #clock-cells = <1>; - }; - - rtc: rtc@10070000 { - compatible = "samsung,s3c6410-rtc"; - reg = <0x10070000 0x100>; - interrupts = <0 73 0>, <0 74 0>; - status = "disabled"; - }; - - mct@10050000 { - compatible = "samsung,exynos4210-mct"; - reg = <0x10050000 0x800>; - interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>, - <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>; - clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>; - clock-names = "fin_pll", "mct"; - }; - - gic: interrupt-controller@10481000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x10481000 0x1000>, - <0x10482000 0x1000>, - <0x10484000 0x2000>, - <0x10486000 0x2000>; - interrupts = <1 9 0xf04>; - }; - - l2c: l2-cache-controller@10502000 { - compatible = "arm,pl310-cache"; - reg = <0x10502000 0x1000>; - cache-unified; - cache-level = <2>; - arm,tag-latency = <2 2 1>; - arm,data-latency = <3 2 1>; - arm,double-linefill = <1>; - arm,double-linefill-incr = <0>; - arm,double-linefill-wrap = <1>; - arm,prefetch-drop = <1>; - arm,prefetch-offset = <7>; - }; - - cmu_dmc: clock-controller@105C0000 { - compatible = "samsung,exynos4415-cmu-dmc"; - reg = <0x105C0000 0x3000>; - #clock-cells = <1>; - }; - - pinctrl_1: pinctrl@11000000 { - compatible = "samsung,exynos4415-pinctrl"; - reg = <0x11000000 0x1000>; - interrupts = <0 225 0>; - - wakeup-interrupt-controller { - compatible = "samsung,exynos4210-wakeup-eint"; - interrupt-parent = <&gic>; - interrupts = <0 48 0>; - }; - }; - - pinctrl_0: pinctrl@11400000 { - compatible = "samsung,exynos4415-pinctrl"; - reg = <0x11400000 0x1000>; - interrupts = <0 240 0>; - }; - - fimd: fimd@11C00000 { - compatible = "samsung,exynos4415-fimd"; - reg = <0x11C00000 0x30000>; - interrupt-names = "fifo", "vsync", "lcd_sys"; - interrupts = <0 84 0>, <0 85 0>, <0 86 0>; - clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>; - clock-names = "sclk_fimd", "fimd"; - samsung,power-domain = <&pd_lcd0>; - iommus = <&sysmmu_fimd0>; - samsung,sysreg = <&sysreg_system_controller>; - status = "disabled"; - }; - - dsi_0: dsi@11C80000 { - compatible = "samsung,exynos4415-mipi-dsi"; - reg = <0x11C80000 0x10000>; - interrupts = <0 83 0>; - samsung,phy-type = <0>; - samsung,power-domain = <&pd_lcd0>; - phys = <&mipi_phy 1>; - phy-names = "dsim"; - clocks = <&cmu CLK_DSIM0>, <&cmu CLK_SCLK_MIPI0>; - clock-names = "bus_clk", "pll_clk"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - sysmmu_fimd0: sysmmu@11E20000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11e20000 0x1000>; - interrupts = <0 80 0>, <0 81 0>; - clock-names = "sysmmu", "master"; - clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>; - power-domains = <&pd_lcd0>; - #iommu-cells = <0>; - }; - - hsotg: hsotg@12480000 { - compatible = "samsung,s3c6400-hsotg"; - reg = <0x12480000 0x20000>; - interrupts = <0 141 0>; - clocks = <&cmu CLK_USBDEVICE>; - clock-names = "otg"; - phys = <&exynos_usbphy 0>; - phy-names = "usb2-phy"; - status = "disabled"; - }; - - mshc_0: mshc@12510000 { - compatible = "samsung,exynos5250-dw-mshc"; - reg = <0x12510000 0x1000>; - interrupts = <0 142 0>; - clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>; - clock-names = "biu", "ciu"; - fifo-depth = <0x80>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - mshc_1: mshc@12520000 { - compatible = "samsung,exynos5250-dw-mshc"; - reg = <0x12520000 0x1000>; - interrupts = <0 143 0>; - clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>; - clock-names = "biu", "ciu"; - fifo-depth = <0x80>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - mshc_2: mshc@12530000 { - compatible = "samsung,exynos5250-dw-mshc"; - reg = <0x12530000 0x1000>; - interrupts = <0 144 0>; - clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>; - clock-names = "biu", "ciu"; - fifo-depth = <0x80>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - ehci: ehci@12580000 { - compatible = "samsung,exynos4210-ehci"; - reg = <0x12580000 0x100>; - interrupts = <0 140 0>; - clocks = <&cmu CLK_USBHOST>; - clock-names = "usbhost"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - phys = <&exynos_usbphy 1>; - status = "disabled"; - }; - port@1 { - reg = <1>; - phys = <&exynos_usbphy 2>; - status = "disabled"; - }; - port@2 { - reg = <2>; - phys = <&exynos_usbphy 3>; - status = "disabled"; - }; - }; - - ohci: ohci@12590000 { - compatible = "samsung,exynos4210-ohci"; - reg = <0x12590000 0x100>; - interrupts = <0 140 0>; - clocks = <&cmu CLK_USBHOST>; - clock-names = "usbhost"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - phys = <&exynos_usbphy 1>; - status = "disabled"; - }; - }; - - exynos_usbphy: exynos-usbphy@125B0000 { - compatible = "samsung,exynos4x12-usb2-phy"; - reg = <0x125B0000 0x100>; - samsung,pmureg-phandle = <&pmu_system_controller>; - samsung,sysreg-phandle = <&sysreg_system_controller>; - clocks = <&cmu CLK_USBDEVICE>, <&xusbxti>; - clock-names = "phy", "ref"; - #phy-cells = <1>; - status = "disabled"; - }; - - amba { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&gic>; - ranges; - - pdma0: pdma@12680000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12680000 0x1000>; - interrupts = <0 138 0>; - clocks = <&cmu CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@12690000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12690000 0x1000>; - interrupts = <0 139 0>; - clocks = <&cmu CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - }; - - adc: adc@126C0000 { - compatible = "samsung,exynos3250-adc", - "samsung,exynos-adc-v2"; - reg = <0x126C0000 0x100>, <0x10020718 0x4>; - interrupts = <0 137 0>; - clock-names = "adc", "sclk"; - clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; - #io-channel-cells = <1>; - io-channel-ranges; - status = "disabled"; - }; - - serial_0: serial@13800000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13800000 0x100>; - interrupts = <0 109 0>; - clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>; - clock-names = "uart", "clk_uart_baud0"; - status = "disabled"; - }; - - serial_1: serial@13810000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13810000 0x100>; - interrupts = <0 110 0>; - clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>; - clock-names = "uart", "clk_uart_baud0"; - status = "disabled"; - }; - - serial_2: serial@13820000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13820000 0x100>; - interrupts = <0 111 0>; - clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>; - clock-names = "uart", "clk_uart_baud0"; - status = "disabled"; - }; - - serial_3: serial@13830000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13830000 0x100>; - interrupts = <0 112 0>; - clocks = <&cmu CLK_UART3>, <&cmu CLK_SCLK_UART3>; - clock-names = "uart", "clk_uart_baud0"; - status = "disabled"; - }; - - i2c_0: i2c@13860000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "samsung,s3c2440-i2c"; - reg = <0x13860000 0x100>; - interrupts = <0 113 0>; - clocks = <&cmu CLK_I2C0>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_bus>; - status = "disabled"; - }; - - i2c_1: i2c@13870000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "samsung,s3c2440-i2c"; - reg = <0x13870000 0x100>; - interrupts = <0 114 0>; - clocks = <&cmu CLK_I2C1>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_bus>; - status = "disabled"; - }; - - i2c_2: i2c@13880000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "samsung,s3c2440-i2c"; - reg = <0x13880000 0x100>; - interrupts = <0 115 0>; - clocks = <&cmu CLK_I2C2>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_bus>; - status = "disabled"; - }; - - i2c_3: i2c@13890000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "samsung,s3c2440-i2c"; - reg = <0x13890000 0x100>; - interrupts = <0 116 0>; - clocks = <&cmu CLK_I2C3>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_bus>; - status = "disabled"; - }; - - i2c_4: i2c@138A0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "samsung,s3c2440-i2c"; - reg = <0x138A0000 0x100>; - interrupts = <0 117 0>; - clocks = <&cmu CLK_I2C4>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_bus>; - status = "disabled"; - }; - - i2c_5: i2c@138B0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "samsung,s3c2440-i2c"; - reg = <0x138B0000 0x100>; - interrupts = <0 118 0>; - clocks = <&cmu CLK_I2C5>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_bus>; - status = "disabled"; - }; - - i2c_6: i2c@138C0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "samsung,s3c2440-i2c"; - reg = <0x138C0000 0x100>; - interrupts = <0 119 0>; - clocks = <&cmu CLK_I2C6>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_bus>; - status = "disabled"; - }; - - i2c_7: i2c@138D0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "samsung,s3c2440-i2c"; - reg = <0x138D0000 0x100>; - interrupts = <0 120 0>; - clocks = <&cmu CLK_I2C7>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c7_bus>; - status = "disabled"; - }; - - spi_0: spi@13920000 { - compatible = "samsung,exynos4210-spi"; - reg = <0x13920000 0x100>; - interrupts = <0 121 0>; - dmas = <&pdma0 7>, <&pdma0 6>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>; - clock-names = "spi", "spi_busclk0"; - samsung,spi-src-clk = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_bus>; - status = "disabled"; - }; - - spi_1: spi@13930000 { - compatible = "samsung,exynos4210-spi"; - reg = <0x13930000 0x100>; - interrupts = <0 122 0>; - dmas = <&pdma1 7>, <&pdma1 6>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>; - clock-names = "spi", "spi_busclk0"; - samsung,spi-src-clk = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi1_bus>; - status = "disabled"; - }; - - spi_2: spi@13940000 { - compatible = "samsung,exynos4210-spi"; - reg = <0x13940000 0x100>; - interrupts = <0 123 0>; - dmas = <&pdma0 9>, <&pdma0 8>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&cmu CLK_SPI2>, <&cmu CLK_SCLK_SPI2>; - clock-names = "spi", "spi_busclk0"; - samsung,spi-src-clk = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_bus>; - status = "disabled"; - }; - - clock_audss: clock-controller@03810000 { - compatible = "samsung,exynos4210-audss-clock"; - reg = <0x03810000 0x0C>; - #clock-cells = <1>; - }; - - i2s0: i2s@3830000 { - compatible = "samsung,s5pv210-i2s"; - reg = <0x03830000 0x100>; - interrupts = <0 124 0>; - clocks = <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_SCLK_I2S>; - clock-names = "iis", "i2s_opclk0"; - dmas = <&pdma1 10>, <&pdma1 9>, <&pdma1 8>; - dma-names = "tx", "rx", "tx-sec"; - pinctrl-names = "default"; - pinctrl-0 = <&i2s0_bus>; - samsung,idma-addr = <0x03000000>; - status = "disabled"; - }; - - pwm: pwm@139D0000 { - compatible = "samsung,exynos4210-pwm"; - reg = <0x139D0000 0x1000>; - interrupts = <0 104 0>, <0 105 0>, <0 106 0>, - <0 107 0>, <0 108 0>; - #pwm-cells = <3>; - status = "disabled"; - }; - - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupts = <0 18 0>, <0 19 0>, <0 20 0>, <0 21 0>; - }; - }; -}; - -#include "exynos4415-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi deleted file mode 100644 index 3394bdcf10ae..000000000000 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ /dev/null @@ -1,578 +0,0 @@ -/* - * Samsung's Exynos4x12 SoCs device tree source - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Samsung's Exynos4x12 SoCs device nodes are listed in this file. Exynos4x12 - * based board files can include this file and provide values for board specfic - * bindings. - * - * Note: This file does not include device nodes for all the controllers in - * Exynos4x12 SoC. As device tree coverage for Exynos4x12 increases, additional - * nodes can be added to this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include "exynos4.dtsi" -#include "exynos4x12-pinctrl.dtsi" -#include "exynos4-cpu-thermal.dtsi" - -/ { - aliases { - pinctrl0 = &pinctrl_0; - pinctrl1 = &pinctrl_1; - pinctrl2 = &pinctrl_2; - pinctrl3 = &pinctrl_3; - fimc-lite0 = &fimc_lite_0; - fimc-lite1 = &fimc_lite_1; - mshc0 = &mshc_0; - }; - - sysram@02020000 { - compatible = "mmio-sram"; - reg = <0x02020000 0x40000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x02020000 0x40000>; - - smp-sysram@0 { - compatible = "samsung,exynos4210-sysram"; - reg = <0x0 0x1000>; - }; - - smp-sysram@2f000 { - compatible = "samsung,exynos4210-sysram-ns"; - reg = <0x2f000 0x1000>; - }; - }; - - pd_isp: isp-power-domain@10023CA0 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10023CA0 0x20>; - #power-domain-cells = <0>; - }; - - l2c: l2-cache-controller@10502000 { - compatible = "arm,pl310-cache"; - reg = <0x10502000 0x1000>; - cache-unified; - cache-level = <2>; - arm,tag-latency = <2 2 1>; - arm,data-latency = <3 2 1>; - arm,double-linefill = <1>; - arm,double-linefill-incr = <0>; - arm,double-linefill-wrap = <1>; - arm,prefetch-drop = <1>; - arm,prefetch-offset = <7>; - }; - - clock: clock-controller@10030000 { - compatible = "samsung,exynos4412-clock"; - reg = <0x10030000 0x20000>; - #clock-cells = <1>; - }; - - mct@10050000 { - compatible = "samsung,exynos4412-mct"; - reg = <0x10050000 0x800>; - interrupt-parent = <&mct_map>; - interrupts = <0>, <1>, <2>, <3>, <4>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; - clock-names = "fin_pll", "mct"; - - mct_map: mct-map { - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = <0 &gic 0 57 0>, - <1 &combiner 12 5>, - <2 &combiner 12 6>, - <3 &combiner 12 7>, - <4 &gic 1 12 0>; - }; - }; - - adc: adc@126C0000 { - compatible = "samsung,exynos-adc-v1"; - reg = <0x126C0000 0x100>; - interrupt-parent = <&combiner>; - interrupts = <10 3>; - clocks = <&clock CLK_TSADC>; - clock-names = "adc"; - #io-channel-cells = <1>; - io-channel-ranges; - samsung,syscon-phandle = <&pmu_system_controller>; - status = "disabled"; - }; - - g2d: g2d@10800000 { - compatible = "samsung,exynos4212-g2d"; - reg = <0x10800000 0x1000>; - interrupts = <0 89 0>; - clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>; - clock-names = "sclk_fimg2d", "fimg2d"; - iommus = <&sysmmu_g2d>; - }; - - camera { - clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>, - <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>; - clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; - - /* fimc_[0-3] are configured outside, under phandles */ - fimc_lite_0: fimc-lite@12390000 { - compatible = "samsung,exynos4212-fimc-lite"; - reg = <0x12390000 0x1000>; - interrupts = <0 105 0>; - power-domains = <&pd_isp>; - clocks = <&clock CLK_FIMC_LITE0>; - clock-names = "flite"; - iommus = <&sysmmu_fimc_lite0>; - status = "disabled"; - }; - - fimc_lite_1: fimc-lite@123A0000 { - compatible = "samsung,exynos4212-fimc-lite"; - reg = <0x123A0000 0x1000>; - interrupts = <0 106 0>; - power-domains = <&pd_isp>; - clocks = <&clock CLK_FIMC_LITE1>; - clock-names = "flite"; - iommus = <&sysmmu_fimc_lite1>; - status = "disabled"; - }; - - fimc_is: fimc-is@12000000 { - compatible = "samsung,exynos4212-fimc-is", "simple-bus"; - reg = <0x12000000 0x260000>; - interrupts = <0 90 0>, <0 95 0>; - power-domains = <&pd_isp>; - clocks = <&clock CLK_FIMC_LITE0>, - <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>, - <&clock CLK_PPMUISPMX>, - <&clock CLK_MOUT_MPLL_USER_T>, - <&clock CLK_FIMC_ISP>, <&clock CLK_FIMC_DRC>, - <&clock CLK_FIMC_FD>, <&clock CLK_MCUISP>, - <&clock CLK_GICISP>, <&clock CLK_MCUCTL_ISP>, - <&clock CLK_PWM_ISP>, - <&clock CLK_DIV_ISP0>, <&clock CLK_DIV_ISP1>, - <&clock CLK_DIV_MCUISP0>, - <&clock CLK_DIV_MCUISP1>, - <&clock CLK_UART_ISP_SCLK>, - <&clock CLK_ACLK200>, <&clock CLK_DIV_ACLK200>, - <&clock CLK_ACLK400_MCUISP>, - <&clock CLK_DIV_ACLK400_MCUISP>; - clock-names = "lite0", "lite1", "ppmuispx", - "ppmuispmx", "mpll", "isp", - "drc", "fd", "mcuisp", - "gicisp", "mcuctl_isp", "pwm_isp", - "ispdiv0", "ispdiv1", "mcuispdiv0", - "mcuispdiv1", "uart", "aclk200", - "div_aclk200", "aclk400mcuisp", - "div_aclk400mcuisp"; - iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>, - <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; - iommu-names = "isp", "drc", "fd", "mcuctl"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - status = "disabled"; - - pmu@10020000 { - reg = <0x10020000 0x3000>; - }; - - i2c1_isp: i2c-isp@12140000 { - compatible = "samsung,exynos4212-i2c-isp"; - reg = <0x12140000 0x100>; - clocks = <&clock CLK_I2C1_ISP>; - clock-names = "i2c_isp"; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - }; - - mshc_0: mmc@12550000 { - compatible = "samsung,exynos4412-dw-mshc"; - reg = <0x12550000 0x1000>; - interrupts = <0 77 0>; - #address-cells = <1>; - #size-cells = <0>; - fifo-depth = <0x80>; - clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>; - clock-names = "biu", "ciu"; - status = "disabled"; - }; - - sysmmu_g2d: sysmmu@10A40000{ - compatible = "samsung,exynos-sysmmu"; - reg = <0x10A40000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <4 7>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_isp: sysmmu@12260000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x12260000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 2>; - power-domains = <&pd_isp>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_ISP>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_drc: sysmmu@12270000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x12270000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 3>; - power-domains = <&pd_isp>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_DRC>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_fd: sysmmu@122A0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x122A0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 4>; - power-domains = <&pd_isp>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_FD>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_mcuctl: sysmmu@122B0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x122B0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 5>; - power-domains = <&pd_isp>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_ISPCX>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_lite0: sysmmu@123B0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x123B0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 0>; - power-domains = <&pd_isp>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_LITE0>, <&clock CLK_FIMC_LITE0>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_lite1: sysmmu@123C0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x123C0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 1>; - power-domains = <&pd_isp>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_LITE1>, <&clock CLK_FIMC_LITE1>; - #iommu-cells = <0>; - }; - - bus_dmc: bus_dmc { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_DMC>; - clock-names = "bus"; - operating-points-v2 = <&bus_dmc_opp_table>; - status = "disabled"; - }; - - bus_acp: bus_acp { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_ACP>; - clock-names = "bus"; - operating-points-v2 = <&bus_acp_opp_table>; - status = "disabled"; - }; - - bus_c2c: bus_c2c { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_C2C>; - clock-names = "bus"; - operating-points-v2 = <&bus_dmc_opp_table>; - status = "disabled"; - }; - - bus_dmc_opp_table: opp_table1 { - compatible = "operating-points-v2"; - opp-shared; - - opp@100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <900000>; - }; - opp@134000000 { - opp-hz = /bits/ 64 <134000000>; - opp-microvolt = <900000>; - }; - opp@160000000 { - opp-hz = /bits/ 64 <160000000>; - opp-microvolt = <900000>; - }; - opp@267000000 { - opp-hz = /bits/ 64 <267000000>; - opp-microvolt = <950000>; - }; - opp@400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <1050000>; - }; - }; - - bus_acp_opp_table: opp_table2 { - compatible = "operating-points-v2"; - opp-shared; - - opp@100000000 { - opp-hz = /bits/ 64 <100000000>; - }; - opp@134000000 { - opp-hz = /bits/ 64 <134000000>; - }; - opp@160000000 { - opp-hz = /bits/ 64 <160000000>; - }; - opp@267000000 { - opp-hz = /bits/ 64 <267000000>; - }; - }; - - bus_leftbus: bus_leftbus { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_GDL>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; - - bus_rightbus: bus_rightbus { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_GDR>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; - - bus_display: bus_display { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_ACLK160>; - clock-names = "bus"; - operating-points-v2 = <&bus_display_opp_table>; - status = "disabled"; - }; - - bus_fsys: bus_fsys { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_ACLK133>; - clock-names = "bus"; - operating-points-v2 = <&bus_fsys_opp_table>; - status = "disabled"; - }; - - bus_peri: bus_peri { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_ACLK100>; - clock-names = "bus"; - operating-points-v2 = <&bus_peri_opp_table>; - status = "disabled"; - }; - - bus_mfc: bus_mfc { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_SCLK_MFC>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; - - bus_leftbus_opp_table: opp_table3 { - compatible = "operating-points-v2"; - opp-shared; - - opp@100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <900000>; - }; - opp@134000000 { - opp-hz = /bits/ 64 <134000000>; - opp-microvolt = <925000>; - }; - opp@160000000 { - opp-hz = /bits/ 64 <160000000>; - opp-microvolt = <950000>; - }; - opp@200000000 { - opp-hz = /bits/ 64 <200000000>; - opp-microvolt = <1000000>; - }; - }; - - bus_display_opp_table: opp_table4 { - compatible = "operating-points-v2"; - opp-shared; - - opp@160000000 { - opp-hz = /bits/ 64 <160000000>; - }; - opp@200000000 { - opp-hz = /bits/ 64 <200000000>; - }; - }; - - bus_fsys_opp_table: opp_table5 { - compatible = "operating-points-v2"; - opp-shared; - - opp@100000000 { - opp-hz = /bits/ 64 <100000000>; - }; - opp@134000000 { - opp-hz = /bits/ 64 <134000000>; - }; - }; - - bus_peri_opp_table: opp_table6 { - compatible = "operating-points-v2"; - opp-shared; - - opp@50000000 { - opp-hz = /bits/ 64 <50000000>; - }; - opp@100000000 { - opp-hz = /bits/ 64 <100000000>; - }; - }; -}; - -&combiner { - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, - <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>; -}; - -&exynos_usbphy { - compatible = "samsung,exynos4x12-usb2-phy"; - samsung,sysreg-phandle = <&sys_reg>; -}; - -&fimc_0 { - compatible = "samsung,exynos4212-fimc"; - samsung,pix-limits = <4224 8192 1920 4224>; - samsung,mainscaler-ext; - samsung,isp-wb; - samsung,cam-if; -}; - -&fimc_1 { - compatible = "samsung,exynos4212-fimc"; - samsung,pix-limits = <4224 8192 1920 4224>; - samsung,mainscaler-ext; - samsung,isp-wb; - samsung,cam-if; -}; - -&fimc_2 { - compatible = "samsung,exynos4212-fimc"; - samsung,pix-limits = <4224 8192 1920 4224>; - samsung,mainscaler-ext; - samsung,isp-wb; - samsung,lcd-wb; - samsung,cam-if; -}; - -&fimc_3 { - compatible = "samsung,exynos4212-fimc"; - samsung,pix-limits = <1920 8192 1366 1920>; - samsung,rotators = <0>; - samsung,mainscaler-ext; - samsung,isp-wb; - samsung,lcd-wb; -}; - -&hdmi { - compatible = "samsung,exynos4212-hdmi"; -}; - -&jpeg_codec { - compatible = "samsung,exynos4212-jpeg"; -}; - -&rotator { - compatible = "samsung,exynos4212-rotator"; -}; - -&mixer { - compatible = "samsung,exynos4212-mixer"; - clock-names = "mixer", "hdmi", "sclk_hdmi", "vp"; - clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, - <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>; -}; - -&pinctrl_0 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x11400000 0x1000>; - interrupts = <0 47 0>; -}; - -&pinctrl_1 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x11000000 0x1000>; - interrupts = <0 46 0>; - - wakup_eint: wakeup-interrupt-controller { - compatible = "samsung,exynos4210-wakeup-eint"; - interrupt-parent = <&gic>; - interrupts = <0 32 0>; - }; -}; - -&pinctrl_2 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x03860000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <10 0>; -}; - -&pinctrl_3 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x106E0000 0x1000>; - interrupts = <0 72 0>; -}; - -&pmu_system_controller { - compatible = "samsung,exynos4212-pmu", "syscon"; - clock-names = "clkout0", "clkout1", "clkout2", "clkout3", - "clkout4", "clkout8", "clkout9"; - clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, - <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, - <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>; - #clock-cells = <1>; -}; - -&tmu { - compatible = "samsung,exynos4412-tmu"; - interrupt-parent = <&combiner>; - interrupts = <2 4>; - reg = <0x100C0000 0x100>; - clocks = <&clock 383>; - clock-names = "tmu_apbif"; - status = "disabled"; -}; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index 8f06609879f5..b74c5379ca26 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -13,6 +13,8 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> #include "exynos-syscon-restart.dtsi" / { @@ -53,25 +55,50 @@ interrupt-controller; samsung,combiner-nr = <32>; reg = <0x10440000 0x1000>; - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, - <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, - <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, + <0 1 IRQ_TYPE_LEVEL_HIGH>, + <0 2 IRQ_TYPE_LEVEL_HIGH>, + <0 3 IRQ_TYPE_LEVEL_HIGH>, + <0 4 IRQ_TYPE_LEVEL_HIGH>, + <0 5 IRQ_TYPE_LEVEL_HIGH>, + <0 6 IRQ_TYPE_LEVEL_HIGH>, + <0 7 IRQ_TYPE_LEVEL_HIGH>, + <0 8 IRQ_TYPE_LEVEL_HIGH>, + <0 9 IRQ_TYPE_LEVEL_HIGH>, + <0 10 IRQ_TYPE_LEVEL_HIGH>, + <0 11 IRQ_TYPE_LEVEL_HIGH>, + <0 12 IRQ_TYPE_LEVEL_HIGH>, + <0 13 IRQ_TYPE_LEVEL_HIGH>, + <0 14 IRQ_TYPE_LEVEL_HIGH>, + <0 15 IRQ_TYPE_LEVEL_HIGH>, + <0 16 IRQ_TYPE_LEVEL_HIGH>, + <0 17 IRQ_TYPE_LEVEL_HIGH>, + <0 18 IRQ_TYPE_LEVEL_HIGH>, + <0 19 IRQ_TYPE_LEVEL_HIGH>, + <0 20 IRQ_TYPE_LEVEL_HIGH>, + <0 21 IRQ_TYPE_LEVEL_HIGH>, + <0 22 IRQ_TYPE_LEVEL_HIGH>, + <0 23 IRQ_TYPE_LEVEL_HIGH>, + <0 24 IRQ_TYPE_LEVEL_HIGH>, + <0 25 IRQ_TYPE_LEVEL_HIGH>, + <0 26 IRQ_TYPE_LEVEL_HIGH>, + <0 27 IRQ_TYPE_LEVEL_HIGH>, + <0 28 IRQ_TYPE_LEVEL_HIGH>, + <0 29 IRQ_TYPE_LEVEL_HIGH>, + <0 30 IRQ_TYPE_LEVEL_HIGH>, + <0 31 IRQ_TYPE_LEVEL_HIGH>; }; gic: interrupt-controller@10481000 { - compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + compatible = "arm,gic-400", "arm,cortex-a15-gic", "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; reg = <0x10481000 0x1000>, - <0x10482000 0x1000>, + <0x10482000 0x2000>, <0x10484000 0x2000>, <0x10486000 0x2000>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; sysreg_system_controller: syscon@10050000 { @@ -82,31 +109,31 @@ serial_0: serial@12C00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; - interrupts = <0 51 0>; + interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>; }; serial_1: serial@12C10000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C10000 0x100>; - interrupts = <0 52 0>; + interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>; }; serial_2: serial@12C20000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C20000 0x100>; - interrupts = <0 53 0>; + interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>; }; serial_3: serial@12C30000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C30000 0x100>; - interrupts = <0 54 0>; + interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>; }; i2c_0: i2c@12C60000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C60000 0x100>; - interrupts = <0 56 0>; + interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; samsung,sysreg-phandle = <&sysreg_system_controller>; @@ -116,7 +143,7 @@ i2c_1: i2c@12C70000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C70000 0x100>; - interrupts = <0 57 0>; + interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; samsung,sysreg-phandle = <&sysreg_system_controller>; @@ -126,7 +153,7 @@ i2c_2: i2c@12C80000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C80000 0x100>; - interrupts = <0 58 0>; + interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; samsung,sysreg-phandle = <&sysreg_system_controller>; @@ -136,7 +163,7 @@ i2c_3: i2c@12C90000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C90000 0x100>; - interrupts = <0 59 0>; + interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; samsung,sysreg-phandle = <&sysreg_system_controller>; @@ -153,7 +180,8 @@ rtc: rtc@101E0000 { compatible = "samsung,s3c6410-rtc"; reg = <0x101E0000 0x100>; - interrupts = <0 43 0>, <0 44 0>; + interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>, + <0 44 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index d5d51916bb74..8f3a80430748 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -523,6 +523,7 @@ status = "okay"; }; +/* eMMC flash */ &mmc_0 { status = "okay"; num-slots = <1>; @@ -536,6 +537,7 @@ cap-mmc-highspeed; }; +/* uSD card */ &mmc_2 { status = "okay"; num-slots = <1>; @@ -553,6 +555,8 @@ /* * On Snow we've got SIP WiFi and so can keep drive strengths low to * reduce EMI. + * + * WiFi SDIO module */ &mmc_3 { status = "okay"; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index f7357d99b47c..79c9c885613a 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -115,18 +115,21 @@ compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; #power-domain-cells = <0>; + label = "GSC"; }; pd_mfc: mfc-power-domain@10044040 { compatible = "samsung,exynos4210-pd"; reg = <0x10044040 0x20>; #power-domain-cells = <0>; + label = "MFC"; }; pd_disp1: disp1-power-domain@100440A0 { compatible = "samsung,exynos4210-pd"; reg = <0x100440A0 0x20>; #power-domain-cells = <0>; + label = "DISP1"; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_ACLK200_DISP1_SUB>, <&clock CLK_MOUT_ACLK300_DISP1_SUB>; @@ -181,8 +184,8 @@ <0x1 0 &combiner 23 4>, <0x2 0 &combiner 25 2>, <0x3 0 &combiner 25 3>, - <0x4 0 &gic 0 120 0>, - <0x5 0 &gic 0 121 0>; + <0x4 0 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>, + <0x5 0 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -195,31 +198,31 @@ pinctrl_0: pinctrl@11400000 { compatible = "samsung,exynos5250-pinctrl"; reg = <0x11400000 0x1000>; - interrupts = <0 46 0>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; wakup_eint: wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; interrupt-parent = <&gic>; - interrupts = <0 32 0>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; }; pinctrl_1: pinctrl@13400000 { compatible = "samsung,exynos5250-pinctrl"; reg = <0x13400000 0x1000>; - interrupts = <0 45 0>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_2: pinctrl@10d10000 { compatible = "samsung,exynos5250-pinctrl"; reg = <0x10d10000 0x1000>; - interrupts = <0 50 0>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_3: pinctrl@03860000 { compatible = "samsung,exynos5250-pinctrl"; reg = <0x03860000 0x1000>; - interrupts = <0 47 0>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; }; pmu_system_controller: system-controller@10040000 { @@ -236,7 +239,7 @@ watchdog@101D0000 { compatible = "samsung,exynos5250-wdt"; reg = <0x101D0000 0x100>; - interrupts = <0 42 0>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_WDT>; clock-names = "watchdog"; samsung,syscon-phandle = <&pmu_system_controller>; @@ -245,7 +248,7 @@ g2d@10850000 { compatible = "samsung,exynos5250-g2d"; reg = <0x10850000 0x1000>; - interrupts = <0 91 0>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_G2D>; clock-names = "fimg2d"; iommus = <&sysmmu_g2d>; @@ -254,7 +257,7 @@ mfc: codec@11000000 { compatible = "samsung,mfc-v6"; reg = <0x11000000 0x10000>; - interrupts = <0 96 0>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_mfc>; clocks = <&clock CLK_MFC>; clock-names = "mfc"; @@ -265,7 +268,7 @@ rotator: rotator@11C00000 { compatible = "samsung,exynos5250-rotator"; reg = <0x11C00000 0x64>; - interrupts = <0 84 0>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_ROTATOR>; clock-names = "rotator"; iommus = <&sysmmu_rotator>; @@ -274,7 +277,7 @@ tmu: tmu@10060000 { compatible = "samsung,exynos5250-tmu"; reg = <0x10060000 0x100>; - interrupts = <0 65 0>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; #include "exynos4412-tmu-sensor-conf.dtsi" @@ -284,7 +287,7 @@ compatible = "snps,dwc-ahci"; samsung,sata-freq = <66>; reg = <0x122F0000 0x1ff>; - interrupts = <0 115 0>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>; clock-names = "sata", "sclk_sata"; phys = <&sata_phy>; @@ -306,7 +309,7 @@ i2c_4: i2c@12CA0000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12CA0000 0x100>; - interrupts = <0 60 0>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock CLK_I2C4>; @@ -319,7 +322,7 @@ i2c_5: i2c@12CB0000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12CB0000 0x100>; - interrupts = <0 61 0>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock CLK_I2C5>; @@ -332,7 +335,7 @@ i2c_6: i2c@12CC0000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12CC0000 0x100>; - interrupts = <0 62 0>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock CLK_I2C6>; @@ -345,7 +348,7 @@ i2c_7: i2c@12CD0000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12CD0000 0x100>; - interrupts = <0 63 0>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock CLK_I2C7>; @@ -358,7 +361,7 @@ i2c_8: i2c@12CE0000 { compatible = "samsung,s3c2440-hdmiphy-i2c"; reg = <0x12CE0000 0x1000>; - interrupts = <0 64 0>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock CLK_I2C_HDMI>; @@ -380,7 +383,7 @@ compatible = "samsung,exynos4210-spi"; status = "disabled"; reg = <0x12d20000 0x100>; - interrupts = <0 66 0>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma0 5 &pdma0 4>; dma-names = "tx", "rx"; @@ -396,7 +399,7 @@ compatible = "samsung,exynos4210-spi"; status = "disabled"; reg = <0x12d30000 0x100>; - interrupts = <0 67 0>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma1 5 &pdma1 4>; dma-names = "tx", "rx"; @@ -412,7 +415,7 @@ compatible = "samsung,exynos4210-spi"; status = "disabled"; reg = <0x12d40000 0x100>; - interrupts = <0 68 0>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma0 7 &pdma0 6>; dma-names = "tx", "rx"; @@ -426,7 +429,7 @@ mmc_0: mmc@12200000 { compatible = "samsung,exynos5250-dw-mshc"; - interrupts = <0 75 0>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; reg = <0x12200000 0x1000>; @@ -438,7 +441,7 @@ mmc_1: mmc@12210000 { compatible = "samsung,exynos5250-dw-mshc"; - interrupts = <0 76 0>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; reg = <0x12210000 0x1000>; @@ -450,7 +453,7 @@ mmc_2: mmc@12220000 { compatible = "samsung,exynos5250-dw-mshc"; - interrupts = <0 77 0>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; reg = <0x12220000 0x1000>; @@ -463,7 +466,7 @@ mmc_3: mmc@12230000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12230000 0x1000>; - interrupts = <0 78 0>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>; @@ -526,7 +529,7 @@ usbdrd_dwc3: dwc3@12000000 { compatible = "synopsys,dwc3"; reg = <0x12000000 0x10000>; - interrupts = <0 72 0>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>; phy-names = "usb2-phy", "usb3-phy"; }; @@ -544,7 +547,7 @@ ehci: usb@12110000 { compatible = "samsung,exynos4210-ehci"; reg = <0x12110000 0x100>; - interrupts = <0 71 0>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_USB2>; clock-names = "usbhost"; @@ -559,7 +562,7 @@ ohci: usb@12120000 { compatible = "samsung,exynos4210-ohci"; reg = <0x12120000 0x100>; - interrupts = <0 71 0>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_USB2>; clock-names = "usbhost"; @@ -591,7 +594,7 @@ pdma0: pdma@121A0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121A0000 0x1000>; - interrupts = <0 34 0>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -602,7 +605,7 @@ pdma1: pdma@121B0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121B0000 0x1000>; - interrupts = <0 35 0>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -613,7 +616,7 @@ mdma0: mdma@10800000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x10800000 0x1000>; - interrupts = <0 33 0>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_MDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -624,7 +627,7 @@ mdma1: mdma@11C10000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x11C10000 0x1000>; - interrupts = <0 124 0>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_MDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -636,7 +639,7 @@ gsc_0: gsc@13e00000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e00000 0x1000>; - interrupts = <0 85 0>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL0>; clock-names = "gscl"; @@ -646,7 +649,7 @@ gsc_1: gsc@13e10000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e10000 0x1000>; - interrupts = <0 86 0>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL1>; clock-names = "gscl"; @@ -656,7 +659,7 @@ gsc_2: gsc@13e20000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e20000 0x1000>; - interrupts = <0 87 0>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL2>; clock-names = "gscl"; @@ -666,7 +669,7 @@ gsc_3: gsc@13e30000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e30000 0x1000>; - interrupts = <0 88 0>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL3>; clock-names = "gscl"; @@ -677,7 +680,7 @@ compatible = "samsung,exynos4212-hdmi"; reg = <0x14530000 0x70000>; power-domains = <&pd_disp1>; - interrupts = <0 95 0>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, <&clock CLK_MOUT_HDMI>; @@ -690,7 +693,7 @@ compatible = "samsung,exynos5250-mixer"; reg = <0x14450000 0x10000>; power-domains = <&pd_disp1>; - interrupts = <0 94 0>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>; clock-names = "mixer", "hdmi", "sclk_hdmi"; @@ -706,7 +709,7 @@ adc: adc@12D10000 { compatible = "samsung,exynos-adc-v1"; reg = <0x12D10000 0x100>; - interrupts = <0 106 0>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_ADC>; clock-names = "adc"; #io-channel-cells = <1>; @@ -718,7 +721,7 @@ sss@10830000 { compatible = "samsung,exynos4210-secss"; reg = <0x10830000 0x300>; - interrupts = <0 112 0>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_SSS>; clock-names = "secss"; }; @@ -1043,21 +1046,29 @@ &serial_0 { clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 13>, <&pdma0 14>; + dma-names = "rx", "tx"; }; &serial_1 { clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 15>, <&pdma1 16>; + dma-names = "rx", "tx"; }; &serial_2 { clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 15>, <&pdma0 16>; + dma-names = "rx", "tx"; }; &serial_3 { clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 17>, <&pdma1 18>; + dma-names = "rx", "tx"; }; #include "exynos5250-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi index a86a4898d077..5e88c9645975 100644 --- a/arch/arm/boot/dts/exynos5260.dtsi +++ b/arch/arm/boot/dts/exynos5260.dtsi @@ -10,6 +10,8 @@ */ #include <dt-bindings/clock/exynos5260-clk.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> / { compatible = "samsung,exynos5260", "samsung,exynos5"; @@ -165,10 +167,11 @@ #size-cells = <0>; interrupt-controller; reg = <0x10481000 0x1000>, - <0x10482000 0x1000>, + <0x10482000 0x2000>, <0x10484000 0x2000>, <0x10486000 0x2000>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; chipid: chipid@10000000 { @@ -181,10 +184,18 @@ reg = <0x100B0000 0x1000>; clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>; clock-names = "fin_pll", "mct"; - interrupts = <0 104 0>, <0 105 0>, <0 106 0>, - <0 107 0>, <0 122 0>, <0 123 0>, - <0 124 0>, <0 125 0>, <0 126 0>, - <0 127 0>, <0 128 0>, <0 129 0>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; }; cci: cci@10F00000 { @@ -210,25 +221,25 @@ pinctrl_0: pinctrl@11600000 { compatible = "samsung,exynos5260-pinctrl"; reg = <0x11600000 0x1000>; - interrupts = <0 79 0>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; interrupt-parent = <&gic>; - interrupts = <0 32 0>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; }; pinctrl_1: pinctrl@12290000 { compatible = "samsung,exynos5260-pinctrl"; reg = <0x12290000 0x1000>; - interrupts = <0 157 0>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_2: pinctrl@128B0000 { compatible = "samsung,exynos5260-pinctrl"; reg = <0x128B0000 0x1000>; - interrupts = <0 243 0>; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; }; pmu_system_controller: system-controller@10D50000 { @@ -239,7 +250,7 @@ uart0: serial@12C00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; - interrupts = <0 146 0>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; status = "disabled"; @@ -248,7 +259,7 @@ uart1: serial@12C10000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C10000 0x100>; - interrupts = <0 147 0>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; status = "disabled"; @@ -257,7 +268,7 @@ uart2: serial@12C20000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C20000 0x100>; - interrupts = <0 148 0>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; status = "disabled"; @@ -266,7 +277,7 @@ uart3: serial@12860000 { compatible = "samsung,exynos4210-uart"; reg = <0x12860000 0x100>; - interrupts = <0 145 0>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>; clock-names = "uart", "clk_uart_baud0"; status = "disabled"; @@ -275,7 +286,7 @@ mmc_0: mmc@12140000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12140000 0x2000>; - interrupts = <0 156 0>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>; @@ -287,7 +298,7 @@ mmc_1: mmc@12150000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12150000 0x2000>; - interrupts = <0 158 0>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>; @@ -299,7 +310,7 @@ mmc_2: mmc@12160000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12160000 0x2000>; - interrupts = <0 159 0>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>; diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index 3c271cb4b2be..c4de1353e5df 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -15,6 +15,7 @@ #include <dt-bindings/clock/maxim,max77802.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/sound/samsung-i2s.h> #include "exynos54xx-odroidxu-leds.dtsi" / { @@ -57,6 +58,61 @@ compatible = "samsung,secure-firmware"; reg = <0x02073000 0x1000>; }; + + sound: sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "Odroid-XU"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Speakers", "Speakers"; + simple-audio-card,routing = + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "Headphone Jack", "MICBIAS", + "IN1", "Headphone Jack", + "Speakers", "SPKL", + "Speakers", "SPKR"; + + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&link0_codec>; + simple-audio-card,frame-master = <&link0_codec>; + + simple-audio-card,cpu { + sound-dai = <&audi2s0 0>; + system-clock-frequency = <19200000>; + }; + + link0_codec: simple-audio-card,codec { + sound-dai = <&max98090>; + clocks = <&audi2s0 CLK_I2S_CDCLK>; + }; + }; +}; + +&audi2s0 { + status = "okay"; +}; + +&clock { + clocks = <&fin_pll>; + assigned-clocks = <&clock CLK_FOUT_EPLL>; + assigned-clock-rates = <192000000>; +}; + +&clock_audss { + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>, + <&clock_audss EXYNOS_DOUT_SRP>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>; + + assigned-clock-parents = <&clock CLK_FOUT_EPLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>; + + assigned-clock-rates = <0>, + <0>, + <96000000>, + <19200000>; }; &cpu0_thermal { @@ -440,6 +496,19 @@ }; }; +&i2c_1 { + status = "okay"; + max98090: max98090@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpj3>; + interrupts = <0 IRQ_TYPE_NONE>; + clocks = <&audi2s0 CLK_I2S_CDCLK>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + }; +}; + &mmc_0 { status = "okay"; mmc-pwrseq = <&emmc_pwrseq>; diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi index a083d23fdee3..ff46a1c27182 100644 --- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi @@ -615,4 +615,13 @@ interrupt-controller; #interrupt-cells = <2>; }; + + audi2s0_bus: audi2s0-bus { + samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", + "gpz-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 137f48464f8b..7eab4bc07cec 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -16,6 +16,7 @@ #include "exynos54xx.dtsi" #include "exynos-syscon-restart.dtsi" #include <dt-bindings/clock/exynos5410.h> +#include <dt-bindings/clock/exynos-audss-clk.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { @@ -82,10 +83,18 @@ #clock-cells = <1>; }; + clock_audss: audss-clock-controller@3810000 { + compatible = "samsung,exynos5410-audss-clock"; + reg = <0x03810000 0x0C>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock CLK_FOUT_EPLL>; + clock-names = "pll_ref", "pll_in"; + }; + tmu_cpu0: tmu@10060000 { compatible = "samsung,exynos5420-tmu"; reg = <0x10060000 0x100>; - interrupts = <GIC_SPI 65 0>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; #include "exynos4412-tmu-sensor-conf.dtsi" @@ -94,7 +103,7 @@ tmu_cpu1: tmu@10064000 { compatible = "samsung,exynos5420-tmu"; reg = <0x10064000 0x100>; - interrupts = <GIC_SPI 183 0>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; #include "exynos4412-tmu-sensor-conf.dtsi" @@ -103,7 +112,7 @@ tmu_cpu2: tmu@10068000 { compatible = "samsung,exynos5420-tmu"; reg = <0x10068000 0x100>; - interrupts = <GIC_SPI 184 0>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; #include "exynos4412-tmu-sensor-conf.dtsi" @@ -112,7 +121,7 @@ tmu_cpu3: tmu@1006c000 { compatible = "samsung,exynos5420-tmu"; reg = <0x1006c000 0x100>; - interrupts = <GIC_SPI 185 0>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; #include "exynos4412-tmu-sensor-conf.dtsi" @@ -121,7 +130,7 @@ mmc_0: mmc@12200000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12200000 0x1000>; - interrupts = <0 75 0>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>; @@ -133,7 +142,7 @@ mmc_1: mmc@12210000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12210000 0x1000>; - interrupts = <0 76 0>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>; @@ -145,7 +154,7 @@ mmc_2: mmc@12220000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12220000 0x1000>; - interrupts = <0 77 0>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>; @@ -157,31 +166,81 @@ pinctrl_0: pinctrl@13400000 { compatible = "samsung,exynos5410-pinctrl"; reg = <0x13400000 0x1000>; - interrupts = <0 45 0>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; interrupt-parent = <&gic>; - interrupts = <0 32 0>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; }; pinctrl_1: pinctrl@14000000 { compatible = "samsung,exynos5410-pinctrl"; reg = <0x14000000 0x1000>; - interrupts = <0 46 0>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_2: pinctrl@10d10000 { compatible = "samsung,exynos5410-pinctrl"; reg = <0x10d10000 0x1000>; - interrupts = <0 50 0>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_3: pinctrl@03860000 { compatible = "samsung,exynos5410-pinctrl"; reg = <0x03860000 0x1000>; - interrupts = <0 47 0>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + }; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + pdma0: pdma@12680000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121A0000 0x1000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@12690000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121B0000 0x1000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + }; + + audi2s0: i2s@03830000 { + compatible = "samsung,exynos5420-i2s"; + reg = <0x03830000 0x100>; + dmas = <&pdma0 10 + &pdma0 9 + &pdma0 8>; + dma-names = "tx", "rx", "tx-sec"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + #clock-cells = <1>; + clock-output-names = "i2s_cdclk0"; + #sound-dai-cells = <1>; + samsung,idma-addr = <0x03000000>; + pinctrl-names = "default"; + pinctrl-0 = <&audi2s0_bus>; + status = "disabled"; }; }; @@ -281,21 +340,29 @@ &serial_0 { clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 13>, <&pdma0 14>; + dma-names = "rx", "tx"; }; &serial_1 { clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 15>, <&pdma1 16>; + dma-names = "rx", "tx"; }; &serial_2 { clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 15>, <&pdma0 16>; + dma-names = "rx", "tx"; }; &serial_3 { clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 17>, <&pdma1 18>; + dma-names = "rx", "tx"; }; &sss { @@ -329,7 +396,7 @@ }; &usbdrd_dwc3_1 { - interrupts = <GIC_SPI 200 0>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; }; &usbdrd_phy1 { diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index ec4a00f1ce01..1f964ec35c5e 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -697,6 +697,7 @@ status = "okay"; }; +/* eMMC flash */ &mmc_0 { status = "okay"; num-slots = <1>; @@ -714,6 +715,7 @@ bus-width = <8>; }; +/* WiFi SDIO module */ &mmc_1 { status = "okay"; num-slots = <1>; @@ -733,6 +735,7 @@ vqmmc-supply = <&buck10_reg>; }; +/* uSD card */ &mmc_2 { status = "okay"; num-slots = <1>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 00c4cfa54839..7dc9dc82afd8 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -193,7 +193,7 @@ mfc: codec@11000000 { compatible = "samsung,mfc-v7"; reg = <0x11000000 0x10000>; - interrupts = <0 96 0>; + interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_MFC>; clock-names = "mfc"; power-domains = <&mfc_pd>; @@ -203,7 +203,7 @@ mmc_0: mmc@12200000 { compatible = "samsung,exynos5420-dw-mshc-smu"; - interrupts = <0 75 0>; + interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; reg = <0x12200000 0x2000>; @@ -215,7 +215,7 @@ mmc_1: mmc@12210000 { compatible = "samsung,exynos5420-dw-mshc-smu"; - interrupts = <0 76 0>; + interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; reg = <0x12210000 0x2000>; @@ -227,7 +227,7 @@ mmc_2: mmc@12220000 { compatible = "samsung,exynos5420-dw-mshc"; - interrupts = <0 77 0>; + interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; reg = <0x12220000 0x1000>; @@ -277,6 +277,7 @@ compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; #power-domain-cells = <0>; + label = "GSC"; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK300_GSCL>, <&clock CLK_GSCL0>, <&clock CLK_GSCL1>; @@ -287,6 +288,7 @@ compatible = "samsung,exynos4210-pd"; reg = <0x10044020 0x20>; #power-domain-cells = <0>; + label = "ISP"; }; mfc_pd: power-domain@10044060 { @@ -297,18 +299,21 @@ <&clock CLK_ACLK333>; clock-names = "oscclk", "clk0","asb0"; #power-domain-cells = <0>; + label = "MFC"; }; msc_pd: power-domain@10044120 { compatible = "samsung,exynos4210-pd"; reg = <0x10044120 0x20>; #power-domain-cells = <0>; + label = "MSC"; }; disp_pd: power-domain@100440C0 { compatible = "samsung,exynos4210-pd"; reg = <0x100440C0 0x20>; #power-domain-cells = <0>; + label = "DISP"; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK200_DISP1>, <&clock CLK_MOUT_USER_ACLK300_DISP1>, @@ -320,37 +325,37 @@ pinctrl_0: pinctrl@13400000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x13400000 0x1000>; - interrupts = <0 45 0>; + interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>; wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; interrupt-parent = <&gic>; - interrupts = <0 32 0>; + interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; }; }; pinctrl_1: pinctrl@13410000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x13410000 0x1000>; - interrupts = <0 78 0>; + interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_2: pinctrl@14000000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x14000000 0x1000>; - interrupts = <0 46 0>; + interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_3: pinctrl@14010000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x14010000 0x1000>; - interrupts = <0 50 0>; + interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_4: pinctrl@03860000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x03860000 0x1000>; - interrupts = <0 47 0>; + interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; }; amba { @@ -363,7 +368,7 @@ adma: adma@03880000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x03880000 0x1000>; - interrupts = <0 110 0>; + interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_audss EXYNOS_ADMA>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -374,7 +379,7 @@ pdma0: pdma@121A0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121A0000 0x1000>; - interrupts = <0 34 0>; + interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -385,7 +390,7 @@ pdma1: pdma@121B0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121B0000 0x1000>; - interrupts = <0 35 0>; + interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -396,7 +401,7 @@ mdma0: mdma@10800000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x10800000 0x1000>; - interrupts = <0 33 0>; + interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_MDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -407,7 +412,7 @@ mdma1: mdma@11C10000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x11C10000 0x1000>; - interrupts = <0 124 0>; + interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_MDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -479,7 +484,7 @@ spi_0: spi@12d20000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d20000 0x100>; - interrupts = <0 68 0>; + interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma0 5 &pdma0 4>; dma-names = "tx", "rx"; @@ -495,7 +500,7 @@ spi_1: spi@12d30000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d30000 0x100>; - interrupts = <0 69 0>; + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma1 5 &pdma1 4>; dma-names = "tx", "rx"; @@ -511,7 +516,7 @@ spi_2: spi@12d40000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d40000 0x100>; - interrupts = <0 70 0>; + interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma0 7 &pdma0 6>; dma-names = "tx", "rx"; @@ -539,7 +544,7 @@ dsi@14500000 { compatible = "samsung,exynos5410-mipi-dsi"; reg = <0x14500000 0x10000>; - interrupts = <0 82 0>; + interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; phys = <&mipi_phy 1>; phy-names = "dsim"; clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>; @@ -552,7 +557,7 @@ adc: adc@12D10000 { compatible = "samsung,exynos-adc-v2"; reg = <0x12D10000 0x100>; - interrupts = <0 106 0>; + interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TSADC>; clock-names = "adc"; #io-channel-cells = <1>; @@ -564,7 +569,7 @@ hsi2c_8: i2c@12E00000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12E00000 0x1000>; - interrupts = <0 87 0>; + interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -577,7 +582,7 @@ hsi2c_9: i2c@12E10000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12E10000 0x1000>; - interrupts = <0 88 0>; + interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -590,7 +595,7 @@ hsi2c_10: i2c@12E20000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12E20000 0x1000>; - interrupts = <0 203 0>; + interrupts = <0 203 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -603,7 +608,7 @@ hdmi: hdmi@14530000 { compatible = "samsung,exynos5420-hdmi"; reg = <0x14530000 0x70000>; - interrupts = <0 95 0>; + interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, <&clock CLK_MOUT_HDMI>; @@ -622,7 +627,7 @@ mixer: mixer@14450000 { compatible = "samsung,exynos5420-mixer"; reg = <0x14450000 0x10000>; - interrupts = <0 94 0>; + interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>; clock-names = "mixer", "hdmi", "sclk_hdmi"; @@ -633,7 +638,7 @@ rotator: rotator@11C00000 { compatible = "samsung,exynos5250-rotator"; reg = <0x11C00000 0x64>; - interrupts = <0 84 0>; + interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_ROTATOR>; clock-names = "rotator"; iommus = <&sysmmu_rotator>; @@ -642,7 +647,7 @@ gsc_0: video-scaler@13e00000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e00000 0x1000>; - interrupts = <0 85 0>; + interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_GSCL0>; clock-names = "gscl"; power-domains = <&gsc_pd>; @@ -652,7 +657,7 @@ gsc_1: video-scaler@13e10000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e10000 0x1000>; - interrupts = <0 86 0>; + interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_GSCL1>; clock-names = "gscl"; power-domains = <&gsc_pd>; @@ -662,7 +667,7 @@ jpeg_0: jpeg@11F50000 { compatible = "samsung,exynos5420-jpeg"; reg = <0x11F50000 0x1000>; - interrupts = <0 89 0>; + interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; clock-names = "jpeg"; clocks = <&clock CLK_JPEG>; iommus = <&sysmmu_jpeg0>; @@ -671,7 +676,7 @@ jpeg_1: jpeg@11F60000 { compatible = "samsung,exynos5420-jpeg"; reg = <0x11F60000 0x1000>; - interrupts = <0 168 0>; + interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; clock-names = "jpeg"; clocks = <&clock CLK_JPEG2>; iommus = <&sysmmu_jpeg1>; @@ -691,7 +696,7 @@ tmu_cpu0: tmu@10060000 { compatible = "samsung,exynos5420-tmu"; reg = <0x10060000 0x100>; - interrupts = <0 65 0>; + interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; #include "exynos4412-tmu-sensor-conf.dtsi" @@ -700,7 +705,7 @@ tmu_cpu1: tmu@10064000 { compatible = "samsung,exynos5420-tmu"; reg = <0x10064000 0x100>; - interrupts = <0 183 0>; + interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; #include "exynos4412-tmu-sensor-conf.dtsi" @@ -709,7 +714,7 @@ tmu_cpu2: tmu@10068000 { compatible = "samsung,exynos5420-tmu-ext-triminfo"; reg = <0x10068000 0x100>, <0x1006c000 0x4>; - interrupts = <0 184 0>; + interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; #include "exynos4412-tmu-sensor-conf.dtsi" @@ -718,7 +723,7 @@ tmu_cpu3: tmu@1006c000 { compatible = "samsung,exynos5420-tmu-ext-triminfo"; reg = <0x1006c000 0x100>, <0x100a0000 0x4>; - interrupts = <0 185 0>; + interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; #include "exynos4412-tmu-sensor-conf.dtsi" @@ -727,7 +732,7 @@ tmu_gpu: tmu@100a0000 { compatible = "samsung,exynos5420-tmu-ext-triminfo"; reg = <0x100a0000 0x100>, <0x10068000 0x4>; - interrupts = <0 215 0>; + interrupts = <0 215 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; #include "exynos4412-tmu-sensor-conf.dtsi" @@ -799,7 +804,7 @@ sysmmu_scaler1r: sysmmu@0x12890000 { compatible = "samsung,exynos-sysmmu"; reg = <0x12890000 0x1000>; - interrupts = <0 186 0>; + interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>; #iommu-cells = <0>; @@ -808,7 +813,7 @@ sysmmu_scaler2r: sysmmu@0x128A0000 { compatible = "samsung,exynos-sysmmu"; reg = <0x128A0000 0x1000>; - interrupts = <0 188 0>; + interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>; #iommu-cells = <0>; @@ -867,7 +872,7 @@ sysmmu_jpeg1: sysmmu@0x11F20000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11F20000 0x1000>; - interrupts = <0 169 0>; + interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>; #iommu-cells = <0>; @@ -1406,21 +1411,29 @@ &serial_0 { clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 13>, <&pdma0 14>; + dma-names = "rx", "tx"; }; &serial_1 { clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 15>, <&pdma1 16>; + dma-names = "rx", "tx"; }; &serial_2 { clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 15>, <&pdma0 16>; + dma-names = "rx", "tx"; }; &serial_3 { clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 17>, <&pdma1 18>; + dma-names = "rx", "tx"; }; &sss { @@ -1445,7 +1458,7 @@ }; &usbdrd_dwc3_1 { - interrupts = <GIC_SPI 73 0>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; }; &usbdrd_phy1 { diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 246d298557f5..05b9afdd6757 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -147,6 +147,11 @@ }; }; +&adc { + vdd-supply = <&ldo4_reg>; + status = "okay"; +}; + &bus_wcore { devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>, <&nocp_mem1_0>, <&nocp_mem1_1>; @@ -293,6 +298,12 @@ regulator-max-microvolt = <1800000>; }; + ldo4_reg: LDO4 { + regulator-name = "vdd_adc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + ldo5_reg: LDO5 { regulator-name = "vdd_ldo5"; regulator-min-microvolt = <1800000>; @@ -499,7 +510,6 @@ &mmc_0 { status = "okay"; mmc-pwrseq = <&emmc_pwrseq>; - cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index e6bffd13cedd..77d35bb92950 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -10,6 +10,8 @@ */ #include <dt-bindings/clock/exynos5440.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> / { compatible = "samsung,exynos5440", "samsung,exynos5"; @@ -38,10 +40,11 @@ #interrupt-cells = <3>; interrupt-controller; reg = <0x2E1000 0x1000>, - <0x2E2000 0x1000>, + <0x2E2000 0x2000>, <0x2E4000 0x2000>, <0x2E6000 0x2000>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; cpus { @@ -72,26 +75,26 @@ arm-pmu { compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu"; - interrupts = <0 52 4>, - <0 53 4>, - <0 54 4>, - <0 55 4>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; }; timer { compatible = "arm,cortex-a15-timer", "arm,armv7-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; clock-frequency = <50000000>; }; cpufreq@160000 { compatible = "samsung,exynos5440-cpufreq"; reg = <0x160000 0x1000>; - interrupts = <0 57 0>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; operating-points = < /* KHz uV */ 1500000 1100000 @@ -108,7 +111,7 @@ serial_0: serial@B0000 { compatible = "samsung,exynos4210-uart"; reg = <0xB0000 0x1000>; - interrupts = <0 2 0>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_B_125>, <&clock CLK_B_125>; clock-names = "uart", "clk_uart_baud0"; }; @@ -116,7 +119,7 @@ serial_1: serial@C0000 { compatible = "samsung,exynos4210-uart"; reg = <0xC0000 0x1000>; - interrupts = <0 3 0>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_B_125>, <&clock CLK_B_125>; clock-names = "uart", "clk_uart_baud0"; }; @@ -124,7 +127,7 @@ spi_0: spi@D0000 { compatible = "samsung,exynos5440-spi"; reg = <0xD0000 0x100>; - interrupts = <0 4 0>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; samsung,spi-src-clk = <0>; @@ -136,8 +139,14 @@ pin_ctrl: pinctrl@E0000 { compatible = "samsung,exynos5440-pinctrl"; reg = <0xE0000 0x1000>; - interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, - <0 41 0>, <0 42 0>, <0 43 0>, <0 44 0>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; #gpio-cells = <2>; @@ -162,7 +171,7 @@ i2c@F0000 { compatible = "samsung,exynos5440-i2c"; reg = <0xF0000 0x1000>; - interrupts = <0 5 0>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock CLK_B_125>; @@ -172,7 +181,7 @@ i2c@100000 { compatible = "samsung,exynos5440-i2c"; reg = <0x100000 0x1000>; - interrupts = <0 6 0>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock CLK_B_125>; @@ -182,16 +191,16 @@ watchdog@110000 { compatible = "samsung,s3c2410-wdt"; reg = <0x110000 0x1000>; - interrupts = <0 1 0>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_B_125>; clock-names = "watchdog"; }; gmac: ethernet@00230000 { - compatible = "snps,dwmac-3.70a"; + compatible = "snps,dwmac-3.70a", "snps,dwmac"; reg = <0x00230000 0x8000>; interrupt-parent = <&gic>; - interrupts = <0 31 4>; + interrupts = <GIC_SPI 31 4>; interrupt-names = "macirq"; phy-mode = "sgmii"; clocks = <&clock CLK_GMAC0>; @@ -209,7 +218,8 @@ rtc@130000 { compatible = "samsung,s3c6410-rtc"; reg = <0x130000 0x1000>; - interrupts = <0 17 0>, <0 16 0>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_B_125>; clock-names = "rtc"; }; @@ -217,7 +227,7 @@ tmuctrl_0: tmuctrl@160118 { compatible = "samsung,exynos5440-tmu"; reg = <0x160118 0x230>, <0x160368 0x10>; - interrupts = <0 58 0>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; #include "exynos5440-tmu-sensor-conf.dtsi" @@ -226,7 +236,7 @@ tmuctrl_1: tmuctrl@16011C { compatible = "samsung,exynos5440-tmu"; reg = <0x16011C 0x230>, <0x160368 0x10>; - interrupts = <0 58 0>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; #include "exynos5440-tmu-sensor-conf.dtsi" @@ -235,7 +245,7 @@ tmuctrl_2: tmuctrl@160120 { compatible = "samsung,exynos5440-tmu"; reg = <0x160120 0x230>, <0x160368 0x10>; - interrupts = <0 58 0>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; #include "exynos5440-tmu-sensor-conf.dtsi" @@ -259,7 +269,7 @@ sata@210000 { compatible = "snps,exynos5440-ahci"; reg = <0x210000 0x10000>; - interrupts = <0 30 0>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_SATA>; clock-names = "sata"; }; @@ -267,7 +277,7 @@ ohci@220000 { compatible = "samsung,exynos5440-ohci"; reg = <0x220000 0x1000>; - interrupts = <0 29 0>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_USB>; clock-names = "usbhost"; }; @@ -275,7 +285,7 @@ ehci@221000 { compatible = "samsung,exynos5440-ehci"; reg = <0x221000 0x1000>; - interrupts = <0 29 0>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_USB>; clock-names = "usbhost"; }; @@ -285,7 +295,9 @@ reg = <0x290000 0x1000 0x270000 0x1000 0x271000 0x40>; - interrupts = <0 20 0>, <0 21 0>, <0 22 0>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>; clock-names = "pcie", "pcie_bus"; #address-cells = <3>; @@ -306,7 +318,9 @@ reg = <0x2a0000 0x1000 0x272000 0x1000 0x271040 0x40>; - interrupts = <0 23 0>, <0 24 0>, <0 25 0>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>; clock-names = "pcie", "pcie_bus"; #address-cells = <3>; diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi index 9d31cdce1959..0389e8a10d0b 100644 --- a/arch/arm/boot/dts/exynos54xx.dtsi +++ b/arch/arm/boot/dts/exynos54xx.dtsi @@ -62,34 +62,34 @@ <1 &combiner 23 4>, <2 &combiner 25 2>, <3 &combiner 25 3>, - <4 &gic 0 120 0>, - <5 &gic 0 121 0>, - <6 &gic 0 122 0>, - <7 &gic 0 123 0>, - <8 &gic 0 128 0>, - <9 &gic 0 129 0>, - <10 &gic 0 130 0>, - <11 &gic 0 131 0>; + <4 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>, + <5 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>, + <6 &gic 0 122 IRQ_TYPE_LEVEL_HIGH>, + <7 &gic 0 123 IRQ_TYPE_LEVEL_HIGH>, + <8 &gic 0 128 IRQ_TYPE_LEVEL_HIGH>, + <9 &gic 0 129 IRQ_TYPE_LEVEL_HIGH>, + <10 &gic 0 130 IRQ_TYPE_LEVEL_HIGH>, + <11 &gic 0 131 IRQ_TYPE_LEVEL_HIGH>; }; }; watchdog: watchdog@101d0000 { compatible = "samsung,exynos5420-wdt"; reg = <0x101d0000 0x100>; - interrupts = <0 42 0>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; }; sss: sss@10830000 { compatible = "samsung,exynos4210-secss"; reg = <0x10830000 0x300>; - interrupts = <0 112 0>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; }; /* i2c_0-3 are defined in exynos5.dtsi */ hsi2c_4: i2c@12ca0000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12ca0000 0x1000>; - interrupts = <0 60 0>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -98,7 +98,7 @@ hsi2c_5: i2c@12cb0000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12cb0000 0x1000>; - interrupts = <0 61 0>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -107,7 +107,7 @@ hsi2c_6: i2c@12cc0000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12cc0000 0x1000>; - interrupts = <0 62 0>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -116,7 +116,7 @@ hsi2c_7: i2c@12cd0000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12cd0000 0x1000>; - interrupts = <0 63 0>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -131,7 +131,7 @@ usbdrd_dwc3_0: dwc3@12000000 { compatible = "snps,dwc3"; reg = <0x12000000 0x10000>; - interrupts = <0 72 0>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>; phy-names = "usb2-phy", "usb3-phy"; }; @@ -166,7 +166,7 @@ usbhost2: usb@12110000 { compatible = "samsung,exynos4210-ehci"; reg = <0x12110000 0x100>; - interrupts = <0 71 0>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -179,7 +179,7 @@ usbhost1: usb@12120000 { compatible = "samsung,exynos4210-ohci"; reg = <0x12120000 0x100>; - interrupts = <0 71 0>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 01f466816fea..f9ff7f07ae0c 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -665,6 +665,7 @@ status = "okay"; }; +/* eMMC flash */ &mmc_0 { status = "okay"; num-slots = <1>; @@ -683,6 +684,7 @@ bus-width = <8>; }; +/* WiFi SDIO module */ &mmc_1 { status = "okay"; num-slots = <1>; @@ -702,6 +704,7 @@ vqmmc-supply = <&buck10_reg>; }; +/* uSD card */ &mmc_2 { status = "okay"; num-slots = <1>; diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi index c85d07e6db61..541d70094544 100644 --- a/arch/arm/boot/dts/hi3620.dtsi +++ b/arch/arm/boot/dts/hi3620.dtsi @@ -11,10 +11,12 @@ * publishhed by the Free Software Foundation. */ -#include "skeleton.dtsi" #include <dt-bindings/clock/hi3620-clock.h> / { + #address-cells = <1>; + #size-cells = <1>; + aliases { serial0 = &uart0; serial1 = &uart1; @@ -537,6 +539,7 @@ reg = <0x803000 0x188>; #address-cells = <1>; #size-cells = <1>; + #pinctrl-cells = <1>; #gpio-range-cells = <3>; ranges; @@ -558,6 +561,7 @@ reg = <0x803800 0x2dc>; #address-cells = <1>; #size-cells = <1>; + #pinctrl-cells = <1>; ranges; pinctrl-single,register-width = <32>; diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi index 4e9562f806a2..9d5fd5cfefa6 100644 --- a/arch/arm/boot/dts/hip01.dtsi +++ b/arch/arm/boot/dts/hip01.dtsi @@ -11,8 +11,6 @@ * published by the Free Software Foundation. */ -#include "skeleton.dtsi" - / { interrupt-parent = <&gic>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi index fdcc23d203e5..6c712a97e1fe 100644 --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -7,10 +7,12 @@ * publishhed by the Free Software Foundation. */ -#include "skeleton.dtsi" #include <dt-bindings/clock/hix5hd2-clock.h> / { + #address-cells = <1>; + #size-cells = <1>; + aliases { serial0 = &uart0; }; @@ -436,18 +438,20 @@ }; gmac0: ethernet@1840000 { - compatible = "hisilicon,hix5hd2-gmac"; + compatible = "hisilicon,hix5hd2-gmac", "hisilicon,hisi-gmac-v1"; reg = <0x1840000 0x1000>,<0x184300c 0x4>; interrupts = <0 71 4>; clocks = <&clock HIX5HD2_MAC0_CLK>; + clock-names = "mac_core"; status = "disabled"; }; gmac1: ethernet@1841000 { - compatible = "hisilicon,hix5hd2-gmac"; + compatible = "hisilicon,hix5hd2-gmac", "hisilicon,hisi-gmac-v1"; reg = <0x1841000 0x1000>,<0x1843010 0x4>; interrupts = <0 72 4>; clocks = <&clock HIX5HD2_MAC1_CLK>; + clock-names = "mac_core"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/imx1-ads.dts index f50498659cc3..5ea28ee07cf4 100644 --- a/arch/arm/boot/dts/imx1-ads.dts +++ b/arch/arm/boot/dts/imx1-ads.dts @@ -38,7 +38,6 @@ &cspi1 { pinctrl-0 = <&pinctrl_cspi1>; - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi index 22f5d1db5b31..38d712be5685 100644 --- a/arch/arm/boot/dts/imx1.dtsi +++ b/arch/arm/boot/dts/imx1.dtsi @@ -9,7 +9,6 @@ * http://www.gnu.org/copyleft/gpl.html */ -#include "skeleton.dtsi" #include "imx1-pinfunc.h" #include <dt-bindings/clock/imx1-clock.h> @@ -17,6 +16,17 @@ #include <dt-bindings/interrupt-controller/irq.h> / { + #address-cells = <1>; + #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; + aliases { gpio0 = &gpio1; gpio1 = &gpio2; @@ -41,8 +51,9 @@ #size-cells = <0>; #address-cells = <1>; - cpu: cpu@0 { + cpu@0 { device_type = "cpu"; + reg = <0>; compatible = "arm,arm920t"; operating-points = <200000 1900000>; clock-latency = <62500>; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 440ee9a4a158..10d57f9cbb42 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -9,11 +9,21 @@ * http://www.gnu.org/copyleft/gpl.html */ -#include "skeleton.dtsi" #include "imx23-pinfunc.h" / { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&icoll>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { gpio0 = &gpio0; @@ -27,12 +37,13 @@ }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; @@ -464,7 +475,7 @@ reg = <0x80038000 0x2000>; status = "disabled"; }; - }; + }; apbx@80040000 { compatible = "simple-bus"; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index af6af8741fe5..e0ba55016a04 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -9,10 +9,20 @@ * http://www.gnu.org/copyleft/gpl.html */ -#include "skeleton.dtsi" #include "imx25-pinfunc.h" / { + #address-cells = <1>; + #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; + aliases { ethernet0 = &fec; gpio0 = &gpio1; @@ -41,12 +51,13 @@ }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; @@ -558,7 +569,7 @@ reg = <0x53ffc000 0x4000>; clocks = <&clks 81>; clock-names = "ipg"; - interrupts = <25>; + interrupts = <25 56>; }; }; diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts index bba3f41b89ef..5f84b598e0d0 100644 --- a/arch/arm/boot/dts/imx27-apf27dev.dts +++ b/arch/arm/boot/dts/imx27-apf27dev.dts @@ -77,7 +77,6 @@ }; &cspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>; @@ -95,7 +94,6 @@ }; &cspi2 { - fsl,spi-num-chipselects = <3>; cs-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>, <&gpio4 27 GPIO_ACTIVE_LOW>, <&gpio2 17 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts index 27846ff9bb0d..f56535768ee8 100644 --- a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts +++ b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts @@ -81,7 +81,6 @@ &cspi1 { pinctrl-0 = <&pinctrl_cspi1>; - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts index d0ef496a1af8..96f442ba6d22 100644 --- a/arch/arm/boot/dts/imx27-pdk.dts +++ b/arch/arm/boot/dts/imx27-pdk.dts @@ -37,7 +37,6 @@ &cspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi2>; - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi index 1b6248079682..4f3e0f473581 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi @@ -23,7 +23,6 @@ }; &cspi1 { - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>, <&gpio4 27 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts index cf09e72aeb06..2a9198f99a8d 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -69,7 +69,6 @@ &cspi1 { pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>; - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>, <&gpio4 27 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi index b4e955e3be8d..82fec935ce83 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi @@ -75,7 +75,6 @@ &cspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi1>; - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index f818ea483aeb..15d85f1f85fd 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -9,7 +9,6 @@ * http://www.gnu.org/copyleft/gpl.html */ -#include "skeleton.dtsi" #include "imx27-pinfunc.h" #include <dt-bindings/clock/imx27-clock.h> @@ -18,6 +17,17 @@ #include <dt-bindings/interrupt-controller/irq.h> / { + #address-cells = <1>; + #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; + aliases { ethernet0 = &fec; gpio0 = &gpio1; @@ -63,6 +73,7 @@ cpu: cpu@0 { device_type = "cpu"; + reg = <0>; compatible = "arm,arm926ej-s"; operating-points = < /* kHz uV */ diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi index 214bb1506b53..a69856e41ba4 100644 --- a/arch/arm/boot/dts/imx28-m28.dtsi +++ b/arch/arm/boot/dts/imx28-m28.dtsi @@ -12,8 +12,8 @@ #include "imx28.dtsi" / { - model = "DENX M28"; - compatible = "denx,m28", "fsl,imx28"; + model = "Aries/DENX M28"; + compatible = "aries,m28", "denx,m28", "fsl,imx28"; memory { reg = <0x40000000 0x08000000>; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 8d04e57039bc..dbfb8aab505f 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -13,8 +13,8 @@ #include "imx28-m28.dtsi" / { - model = "DENX M28EVK"; - compatible = "denx,m28evk", "fsl,imx28"; + model = "Aries/DENX M28EVK"; + compatible = "aries,m28evk", "denx,m28evk", "fsl,imx28"; apb@80000000 { apbh@80000000 { diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 0ad893bf5f43..148fcf4d3b98 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -10,11 +10,21 @@ */ #include <dt-bindings/gpio/gpio.h> -#include "skeleton.dtsi" #include "imx28-pinfunc.h" / { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&icoll>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; aliases { ethernet0 = &mac0; @@ -38,12 +48,13 @@ }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; @@ -1068,6 +1079,7 @@ }; saif0: saif@80042000 { + #sound-dai-cells = <0>; compatible = "fsl,imx28-saif"; reg = <0x80042000 0x2000>; interrupts = <59>; @@ -1084,6 +1096,7 @@ }; saif1: saif@80046000 { + #sound-dai-cells = <0>; compatible = "fsl,imx28-saif"; reg = <0x80046000 0x2000>; interrupts = <58>; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index 1ce7ae94e7ad..a72031407ebd 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -9,9 +9,18 @@ * http://www.gnu.org/copyleft/gpl.html */ -#include "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; + aliases { serial0 = &uart1; serial1 = &uart2; @@ -21,20 +30,21 @@ }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm1136jf-s"; device_type = "cpu"; + reg = <0>; }; }; - avic: avic-interrupt-controller@60000000 { + avic: interrupt-controller@68000000 { compatible = "fsl,imx31-avic", "fsl,avic"; interrupt-controller; #interrupt-cells = <1>; - reg = <0x60000000 0x100000>; + reg = <0x68000000 0x100000>; }; soc { @@ -118,13 +128,6 @@ interrupts = <19>; clocks = <&clks 25>; }; - - clks: ccm@53f80000{ - compatible = "fsl,imx31-ccm"; - reg = <0x53f80000 0x4000>; - interrupts = <0 31 0x04 0 53 0x04>; - #clock-cells = <1>; - }; }; aips@53f00000 { /* AIPS2 */ @@ -134,6 +137,13 @@ reg = <0x53f00000 0x100000>; ranges; + clks: ccm@53f80000{ + compatible = "fsl,imx31-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <31>, <53>; + #clock-cells = <1>; + }; + gpt: timer@53f90000 { compatible = "fsl,imx31-gpt"; reg = <0x53f90000 0x4000>; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index f812d586c5ce..6d5e6a60bee7 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -8,10 +8,20 @@ * Free Software Foundation. */ -#include "skeleton.dtsi" #include "imx35-pinfunc.h" / { + #address-cells = <1>; + #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; + aliases { ethernet0 = &fec; gpio0 = &gpio1; @@ -25,12 +35,13 @@ }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm1136jf-s"; device_type = "cpu"; + reg = <0>; }; }; diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts index 27d763c7a307..dba2d951aa15 100644 --- a/arch/arm/boot/dts/imx50-evk.dts +++ b/arch/arm/boot/dts/imx50-evk.dts @@ -26,7 +26,6 @@ &cspi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi>; - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 11 0>, <&gpio4 13 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 8fe8beeb68a4..ceae909e2201 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -11,11 +11,21 @@ * http://www.gnu.org/copyleft/gpl.html */ -#include "skeleton.dtsi" #include "imx50-pinfunc.h" #include <dt-bindings/clock/imx5-clock.h> / { + #address-cells = <1>; + #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; + aliases { ethernet0 = &fec; gpio0 = &gpio1; @@ -103,8 +113,8 @@ reg = <0x50004000 0x4000>; interrupts = <1>; clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC1_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC1_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -115,8 +125,8 @@ reg = <0x50008000 0x4000>; interrupts = <2>; clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC2_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC2_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -127,7 +137,7 @@ reg = <0x5000c000 0x4000>; interrupts = <33>; clocks = <&clks IMX5_CLK_UART3_IPG_GATE>, - <&clks IMX5_CLK_UART3_PER_GATE>; + <&clks IMX5_CLK_UART3_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -139,7 +149,7 @@ reg = <0x50010000 0x4000>; interrupts = <36>; clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>, - <&clks IMX5_CLK_ECSPI1_PER_GATE>; + <&clks IMX5_CLK_ECSPI1_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -164,8 +174,8 @@ reg = <0x50020000 0x4000>; interrupts = <3>; clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC3_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC3_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -176,8 +186,8 @@ reg = <0x50024000 0x4000>; interrupts = <4>; clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC4_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC4_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -279,7 +289,7 @@ reg = <0x53fa0000 0x4000>; interrupts = <39>; clocks = <&clks IMX5_CLK_GPT_IPG_GATE>, - <&clks IMX5_CLK_GPT_HF_GATE>; + <&clks IMX5_CLK_GPT_HF_GATE>; clock-names = "ipg", "per"; }; @@ -298,7 +308,7 @@ compatible = "fsl,imx50-pwm", "fsl,imx27-pwm"; reg = <0x53fb4000 0x4000>; clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, - <&clks IMX5_CLK_PWM1_HF_GATE>; + <&clks IMX5_CLK_PWM1_HF_GATE>; clock-names = "ipg", "per"; interrupts = <61>; }; @@ -308,7 +318,7 @@ compatible = "fsl,imx50-pwm", "fsl,imx27-pwm"; reg = <0x53fb8000 0x4000>; clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>, - <&clks IMX5_CLK_PWM2_HF_GATE>; + <&clks IMX5_CLK_PWM2_HF_GATE>; clock-names = "ipg", "per"; interrupts = <94>; }; @@ -318,7 +328,7 @@ reg = <0x53fbc000 0x4000>; interrupts = <31>; clocks = <&clks IMX5_CLK_UART1_IPG_GATE>, - <&clks IMX5_CLK_UART1_PER_GATE>; + <&clks IMX5_CLK_UART1_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -328,7 +338,7 @@ reg = <0x53fc0000 0x4000>; interrupts = <32>; clocks = <&clks IMX5_CLK_UART2_IPG_GATE>, - <&clks IMX5_CLK_UART2_PER_GATE>; + <&clks IMX5_CLK_UART2_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -383,7 +393,7 @@ reg = <0x53ff0000 0x4000>; interrupts = <13>; clocks = <&clks IMX5_CLK_UART4_IPG_GATE>, - <&clks IMX5_CLK_UART4_PER_GATE>; + <&clks IMX5_CLK_UART4_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -401,7 +411,7 @@ reg = <0x63f90000 0x4000>; interrupts = <86>; clocks = <&clks IMX5_CLK_UART5_IPG_GATE>, - <&clks IMX5_CLK_UART5_PER_GATE>; + <&clks IMX5_CLK_UART5_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -420,7 +430,7 @@ reg = <0x63fac000 0x4000>; interrupts = <37>; clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>, - <&clks IMX5_CLK_ECSPI2_PER_GATE>; + <&clks IMX5_CLK_ECSPI2_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -430,7 +440,7 @@ reg = <0x63fb0000 0x4000>; interrupts = <6>; clocks = <&clks IMX5_CLK_SDMA_GATE>, - <&clks IMX5_CLK_SDMA_GATE>; + <&clks IMX5_CLK_SDMA_GATE>; clock-names = "ipg", "ahb"; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin"; }; @@ -442,7 +452,7 @@ reg = <0x63fc0000 0x4000>; interrupts = <38>; clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>, - <&clks IMX5_CLK_CSPI_IPG_GATE>; + <&clks IMX5_CLK_CSPI_IPG_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -492,8 +502,8 @@ reg = <0x63fec000 0x4000>; interrupts = <87>; clocks = <&clks IMX5_CLK_FEC_GATE>, - <&clks IMX5_CLK_FEC_GATE>, - <&clks IMX5_CLK_FEC_GATE>; + <&clks IMX5_CLK_FEC_GATE>, + <&clks IMX5_CLK_FEC_GATE>; clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts index 0f3fe29b816e..a5e6091c8729 100644 --- a/arch/arm/boot/dts/imx51-apf51dev.dts +++ b/arch/arm/boot/dts/imx51-apf51dev.dts @@ -80,7 +80,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>, <&gpio4 25 GPIO_ACTIVE_HIGH>; status = "okay"; @@ -89,7 +88,6 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>, <&gpio3 27 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index f097b4f29ab4..873cf242679c 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -178,7 +178,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>, <&gpio4 25 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi index 16fc69c69ab2..b821066a0d2a 100644 --- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi +++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi @@ -24,7 +24,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index 728212861ece..1305b05c7ed9 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -114,7 +114,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index f46fe9bf0bcb..1ee1d542d9ad 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -10,7 +10,6 @@ * http://www.gnu.org/copyleft/gpl.html */ -#include "skeleton.dtsi" #include "imx51-pinfunc.h" #include <dt-bindings/clock/imx5-clock.h> #include <dt-bindings/gpio/gpio.h> @@ -18,6 +17,17 @@ #include <dt-bindings/interrupt-controller/irq.h> / { + #address-cells = <1>; + #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; + aliases { ethernet0 = &fec; gpio0 = &gpio1; @@ -130,8 +140,8 @@ reg = <0x40000000 0x20000000>; interrupts = <11 10>; clocks = <&clks IMX5_CLK_IPU_GATE>, - <&clks IMX5_CLK_IPU_DI0_GATE>, - <&clks IMX5_CLK_IPU_DI1_GATE>; + <&clks IMX5_CLK_IPU_DI0_GATE>, + <&clks IMX5_CLK_IPU_DI1_GATE>; clock-names = "bus", "di0", "di1"; resets = <&src 2>; @@ -169,8 +179,8 @@ reg = <0x70004000 0x4000>; interrupts = <1>; clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC1_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC1_PER_GATE>; clock-names = "ipg", "ahb", "per"; status = "disabled"; }; @@ -180,8 +190,8 @@ reg = <0x70008000 0x4000>; interrupts = <2>; clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC2_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC2_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -192,7 +202,7 @@ reg = <0x7000c000 0x4000>; interrupts = <33>; clocks = <&clks IMX5_CLK_UART3_IPG_GATE>, - <&clks IMX5_CLK_UART3_PER_GATE>; + <&clks IMX5_CLK_UART3_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -204,7 +214,7 @@ reg = <0x70010000 0x4000>; interrupts = <36>; clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>, - <&clks IMX5_CLK_ECSPI1_PER_GATE>; + <&clks IMX5_CLK_ECSPI1_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -229,8 +239,8 @@ reg = <0x70020000 0x4000>; interrupts = <3>; clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC3_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC3_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -241,8 +251,8 @@ reg = <0x70024000 0x4000>; interrupts = <4>; clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC4_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC4_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -364,7 +374,7 @@ reg = <0x73fa0000 0x4000>; interrupts = <39>; clocks = <&clks IMX5_CLK_GPT_IPG_GATE>, - <&clks IMX5_CLK_GPT_HF_GATE>; + <&clks IMX5_CLK_GPT_HF_GATE>; clock-names = "ipg", "per"; }; @@ -378,7 +388,7 @@ compatible = "fsl,imx51-pwm", "fsl,imx27-pwm"; reg = <0x73fb4000 0x4000>; clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, - <&clks IMX5_CLK_PWM1_HF_GATE>; + <&clks IMX5_CLK_PWM1_HF_GATE>; clock-names = "ipg", "per"; interrupts = <61>; }; @@ -388,7 +398,7 @@ compatible = "fsl,imx51-pwm", "fsl,imx27-pwm"; reg = <0x73fb8000 0x4000>; clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>, - <&clks IMX5_CLK_PWM2_HF_GATE>; + <&clks IMX5_CLK_PWM2_HF_GATE>; clock-names = "ipg", "per"; interrupts = <94>; }; @@ -398,7 +408,7 @@ reg = <0x73fbc000 0x4000>; interrupts = <31>; clocks = <&clks IMX5_CLK_UART1_IPG_GATE>, - <&clks IMX5_CLK_UART1_PER_GATE>; + <&clks IMX5_CLK_UART1_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -408,7 +418,7 @@ reg = <0x73fc0000 0x4000>; interrupts = <32>; clocks = <&clks IMX5_CLK_UART2_IPG_GATE>, - <&clks IMX5_CLK_UART2_PER_GATE>; + <&clks IMX5_CLK_UART2_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -456,7 +466,7 @@ reg = <0x83fac000 0x4000>; interrupts = <37>; clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>, - <&clks IMX5_CLK_ECSPI2_PER_GATE>; + <&clks IMX5_CLK_ECSPI2_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -466,7 +476,7 @@ reg = <0x83fb0000 0x4000>; interrupts = <6>; clocks = <&clks IMX5_CLK_SDMA_GATE>, - <&clks IMX5_CLK_SDMA_GATE>; + <&clks IMX5_CLK_SDMA_GATE>; clock-names = "ipg", "ahb"; #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; @@ -479,7 +489,7 @@ reg = <0x83fc0000 0x4000>; interrupts = <38>; clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>, - <&clks IMX5_CLK_CSPI_IPG_GATE>; + <&clks IMX5_CLK_CSPI_IPG_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -582,8 +592,8 @@ reg = <0x83fec000 0x4000>; interrupts = <87>; clocks = <&clks IMX5_CLK_FEC_GATE>, - <&clks IMX5_CLK_FEC_GATE>, - <&clks IMX5_CLK_FEC_GATE>; + <&clks IMX5_CLK_FEC_GATE>, + <&clks IMX5_CLK_FEC_GATE>; clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi index d259f57bfd98..ec390aa562c3 100644 --- a/arch/arm/boot/dts/imx53-m53.dtsi +++ b/arch/arm/boot/dts/imx53-m53.dtsi @@ -12,8 +12,8 @@ #include "imx53.dtsi" / { - model = "DENX M53"; - compatible = "denx,imx53-m53", "fsl,imx53"; + model = "Aries/DENX M53"; + compatible = "aries,imx53-m53", "denx,imx53-m53", "fsl,imx53"; memory { reg = <0x70000000 0x20000000>, diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index dcee1e0f968f..4347a321c782 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -13,8 +13,8 @@ #include "imx53-m53.dtsi" / { - model = "DENX M53EVK"; - compatible = "denx,imx53-m53evk", "fsl,imx53"; + model = "Aries/DENX M53EVK"; + compatible = "aries,imx53-m53evk", "denx,imx53-m53evk", "fsl,imx53"; display1: display@di1 { compatible = "fsl,imx-parallel-display"; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index c05e7cfd0cbc..40b3e31935d0 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -215,16 +215,16 @@ pinctrl_fec: fecgrp { fsl,pins = < - MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 - MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 - MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 - MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 - MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 - MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 - MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 - MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 - MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 - MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 + MX53_PAD_FEC_MDC__FEC_MDC 0x4 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4 >; }; diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index 379939699164..f4c158cce908 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -90,7 +90,6 @@ ldo7_reg: ldo7 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; - regulator-always-on; }; ldo8_reg: ldo8 { @@ -113,3 +112,7 @@ }; }; }; + +&tve { + dac-supply = <&ldo7_reg>; +}; diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts index 96d7eede412e..479ca4c9e384 100644 --- a/arch/arm/boot/dts/imx53-qsrb.dts +++ b/arch/arm/boot/dts/imx53-qsrb.dts @@ -130,8 +130,6 @@ regulator-name = "VDAC"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2775000>; - regulator-boot-on; - regulator-always-on; }; vgen1_reg: vgen1 { @@ -152,3 +150,7 @@ }; }; }; + +&tve { + dac-supply = <&vdac_reg>; +}; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 9f5190040555..472f6f0f55b3 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -63,7 +63,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index 91a6a9ff50d7..85972f2201c2 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -55,7 +55,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <4>; cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, <&gpio3 24 0>, <&gpio3 25 0>; status = "disabled"; @@ -249,7 +248,6 @@ &cspi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi>; - fsl,spi-num-chipselects = <3>; cs-gpios = <&gpio1 18 0>, <&gpio1 19 0>, <&gpio1 21 0>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 57e75f1639e0..3a3220141988 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -161,7 +161,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <2>; status = "okay"; cs-gpios = < diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi index ba689fbd0e41..524192cf6a0f 100644 --- a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi +++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi @@ -129,7 +129,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <4>; cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, <&gpio2 16 0>, <&gpio2 17 0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 0777b41cdfe8..2e516f4985e4 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -10,7 +10,6 @@ * http://www.gnu.org/copyleft/gpl.html */ -#include "skeleton.dtsi" #include "imx53-pinfunc.h" #include <dt-bindings/clock/imx5-clock.h> #include <dt-bindings/gpio/gpio.h> @@ -18,6 +17,17 @@ #include <dt-bindings/interrupt-controller/irq.h> / { + #address-cells = <1>; + #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; + aliases { ethernet0 = &fec; gpio0 = &gpio1; @@ -131,8 +141,8 @@ reg = <0x18000000 0x08000000>; interrupts = <11 10>; clocks = <&clks IMX5_CLK_IPU_GATE>, - <&clks IMX5_CLK_IPU_DI0_GATE>, - <&clks IMX5_CLK_IPU_DI1_GATE>; + <&clks IMX5_CLK_IPU_DI0_GATE>, + <&clks IMX5_CLK_IPU_DI1_GATE>; clock-names = "bus", "di0", "di1"; resets = <&src 2>; @@ -199,8 +209,8 @@ reg = <0x50004000 0x4000>; interrupts = <1>; clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC1_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC1_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -211,8 +221,8 @@ reg = <0x50008000 0x4000>; interrupts = <2>; clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC2_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC2_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -223,7 +233,7 @@ reg = <0x5000c000 0x4000>; interrupts = <33>; clocks = <&clks IMX5_CLK_UART3_IPG_GATE>, - <&clks IMX5_CLK_UART3_PER_GATE>; + <&clks IMX5_CLK_UART3_PER_GATE>; clock-names = "ipg", "per"; dmas = <&sdma 42 4 0>, <&sdma 43 4 0>; dma-names = "rx", "tx"; @@ -237,7 +247,7 @@ reg = <0x50010000 0x4000>; interrupts = <36>; clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>, - <&clks IMX5_CLK_ECSPI1_PER_GATE>; + <&clks IMX5_CLK_ECSPI1_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -264,8 +274,8 @@ reg = <0x50020000 0x4000>; interrupts = <3>; clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC3_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC3_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -276,8 +286,8 @@ reg = <0x50024000 0x4000>; interrupts = <4>; clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC4_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC4_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -419,7 +429,7 @@ reg = <0x53fa0000 0x4000>; interrupts = <39>; clocks = <&clks IMX5_CLK_GPT_IPG_GATE>, - <&clks IMX5_CLK_GPT_HF_GATE>; + <&clks IMX5_CLK_GPT_HF_GATE>; clock-names = "ipg", "per"; }; @@ -440,11 +450,11 @@ reg = <0x53fa8008 0x4>; gpr = <&gpr>; clocks = <&clks IMX5_CLK_LDB_DI0_SEL>, - <&clks IMX5_CLK_LDB_DI1_SEL>, - <&clks IMX5_CLK_IPU_DI0_SEL>, - <&clks IMX5_CLK_IPU_DI1_SEL>, - <&clks IMX5_CLK_LDB_DI0_GATE>, - <&clks IMX5_CLK_LDB_DI1_GATE>; + <&clks IMX5_CLK_LDB_DI1_SEL>, + <&clks IMX5_CLK_IPU_DI0_SEL>, + <&clks IMX5_CLK_IPU_DI1_SEL>, + <&clks IMX5_CLK_LDB_DI0_GATE>, + <&clks IMX5_CLK_LDB_DI1_GATE>; clock-names = "di0_pll", "di1_pll", "di0_sel", "di1_sel", "di0", "di1"; @@ -486,7 +496,7 @@ compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; reg = <0x53fb4000 0x4000>; clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, - <&clks IMX5_CLK_PWM1_HF_GATE>; + <&clks IMX5_CLK_PWM1_HF_GATE>; clock-names = "ipg", "per"; interrupts = <61>; }; @@ -496,7 +506,7 @@ compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; reg = <0x53fb8000 0x4000>; clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>, - <&clks IMX5_CLK_PWM2_HF_GATE>; + <&clks IMX5_CLK_PWM2_HF_GATE>; clock-names = "ipg", "per"; interrupts = <94>; }; @@ -506,7 +516,7 @@ reg = <0x53fbc000 0x4000>; interrupts = <31>; clocks = <&clks IMX5_CLK_UART1_IPG_GATE>, - <&clks IMX5_CLK_UART1_PER_GATE>; + <&clks IMX5_CLK_UART1_PER_GATE>; clock-names = "ipg", "per"; dmas = <&sdma 18 4 0>, <&sdma 19 4 0>; dma-names = "rx", "tx"; @@ -518,7 +528,7 @@ reg = <0x53fc0000 0x4000>; interrupts = <32>; clocks = <&clks IMX5_CLK_UART2_IPG_GATE>, - <&clks IMX5_CLK_UART2_PER_GATE>; + <&clks IMX5_CLK_UART2_PER_GATE>; clock-names = "ipg", "per"; dmas = <&sdma 12 4 0>, <&sdma 13 4 0>; dma-names = "rx", "tx"; @@ -530,7 +540,7 @@ reg = <0x53fc8000 0x4000>; interrupts = <82>; clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, - <&clks IMX5_CLK_CAN1_SERIAL_GATE>; + <&clks IMX5_CLK_CAN1_SERIAL_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -540,7 +550,7 @@ reg = <0x53fcc000 0x4000>; interrupts = <83>; clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>, - <&clks IMX5_CLK_CAN2_SERIAL_GATE>; + <&clks IMX5_CLK_CAN2_SERIAL_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -603,7 +613,7 @@ reg = <0x53ff0000 0x4000>; interrupts = <13>; clocks = <&clks IMX5_CLK_UART4_IPG_GATE>, - <&clks IMX5_CLK_UART4_PER_GATE>; + <&clks IMX5_CLK_UART4_PER_GATE>; clock-names = "ipg", "per"; dmas = <&sdma 2 4 0>, <&sdma 3 4 0>; dma-names = "rx", "tx"; @@ -635,7 +645,7 @@ reg = <0x63f90000 0x4000>; interrupts = <86>; clocks = <&clks IMX5_CLK_UART5_IPG_GATE>, - <&clks IMX5_CLK_UART5_PER_GATE>; + <&clks IMX5_CLK_UART5_PER_GATE>; clock-names = "ipg", "per"; dmas = <&sdma 16 4 0>, <&sdma 17 4 0>; dma-names = "rx", "tx"; @@ -656,7 +666,7 @@ reg = <0x63fac000 0x4000>; interrupts = <37>; clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>, - <&clks IMX5_CLK_ECSPI2_PER_GATE>; + <&clks IMX5_CLK_ECSPI2_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -666,7 +676,7 @@ reg = <0x63fb0000 0x4000>; interrupts = <6>; clocks = <&clks IMX5_CLK_SDMA_GATE>, - <&clks IMX5_CLK_SDMA_GATE>; + <&clks IMX5_CLK_SDMA_GATE>; clock-names = "ipg", "ahb"; #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; @@ -679,7 +689,7 @@ reg = <0x63fc0000 0x4000>; interrupts = <38>; clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>, - <&clks IMX5_CLK_CSPI_IPG_GATE>; + <&clks IMX5_CLK_CSPI_IPG_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -755,8 +765,8 @@ reg = <0x63fec000 0x4000>; interrupts = <87>; clocks = <&clks IMX5_CLK_FEC_GATE>, - <&clks IMX5_CLK_FEC_GATE>, - <&clks IMX5_CLK_FEC_GATE>; + <&clks IMX5_CLK_FEC_GATE>, + <&clks IMX5_CLK_FEC_GATE>; clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; @@ -766,7 +776,7 @@ reg = <0x63ff0000 0x1000>; interrupts = <92>; clocks = <&clks IMX5_CLK_TVE_GATE>, - <&clks IMX5_CLK_IPU_DI1_SEL>; + <&clks IMX5_CLK_IPU_DI1_SEL>; clock-names = "tve", "di_sel"; status = "disabled"; @@ -782,7 +792,7 @@ reg = <0x63ff4000 0x1000>; interrupts = <9>; clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>, - <&clks IMX5_CLK_VPU_GATE>; + <&clks IMX5_CLK_VPU_GATE>; clock-names = "per", "ahb"; resets = <&src 1>; iram = <&ocram>; @@ -793,7 +803,7 @@ reg = <0x63ff8000 0x4000>; interrupts = <19 20>; clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>, - <&clks IMX5_CLK_SAHARA_IPG_GATE>; + <&clks IMX5_CLK_SAHARA_IPG_GATE>; clock-names = "ipg", "ahb"; }; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts index bb92f309c191..0677625463d6 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts index 3d5ad2cc7e22..805b1318b7f7 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts index d4c4a22db488..32a812b1839e 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts @@ -66,7 +66,6 @@ }; &ecspi2 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts new file mode 100644 index 000000000000..26541538562c --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -0,0 +1,253 @@ +/* + * Copyright 2014-2016 Toradex AG + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx6dl.dtsi" +#include "imx6qdl-colibri.dtsi" + +/ { + model = "Toradex Colibri iMX6DL/S on Colibri Evaluation Board V3"; + compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl", + "fsl,imx6dl"; + + aliases { + i2c0 = &i2c2; + i2c1 = &i2c3; + }; + + aliases { + rtc0 = &rtc_i2c; + rtc1 = &snvs_rtc; + }; + + clocks { + /* Fixed crystal dedicated to mcp251x */ + clk16m: clk@1 { + compatible = "fixed-clock"; + reg = <1>; + #clock-cells = <0>; + clock-frequency = <16000000>; + clock-output-names = "clk16m"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + wakeup { + label = "Wake-Up"; + gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */ + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + + lcd_display: display@di0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_lcdif>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel: panel { + /* + * edt,et057090dhu: EDT 5.7" LCD TFT + * edt,et070080dh6: EDT 7.0" LCD TFT + */ + compatible = "edt,et057090dhu"; + backlight = <&backlight>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; +}; + +&backlight { + brightness-levels = <0 127 191 223 239 247 251 255>; + default-brightness-level = <1>; + status = "okay"; +}; + +/* Colibri SSP */ +&ecspi4 { + status = "okay"; + + mcp251x0: mcp251x@1 { + compatible = "microchip,mcp2515"; + reg = <0>; + clocks = <&clk16m>; + interrupt-parent = <&gpio3>; + interrupts = <27 0x2>; + spi-max-frequency = <10000000>; + status = "okay"; + }; +}; + +&hdmi { + status = "okay"; +}; + +/* + * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) + */ +&i2c3 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + compatible = "st,m41t00"; + reg = <0x68>; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +®_usb_host_vbus { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_host_vbus>; + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +/* Colibri MMC */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc_cd>; + cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */ + status = "okay"; +}; + +&weim { + status = "okay"; + + /* weim memory map: 32MB on CS0, 32MB on CS1, 32MB on CS2 */ + ranges = <0 0 0x08000000 0x02000000 + 1 0 0x0a000000 0x02000000 + 2 0 0x0c000000 0x02000000>; + + /* SRAM on Colibri nEXT_CS0 */ + sram@0,0 { + compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram"; + reg = <0 0 0x00010000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000 + 0x00000000 0x04000040 0x00000000>; + }; + + /* SRAM on Colibri nEXT_CS1 */ + sram@1,0 { + compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram"; + reg = <1 0 0x00010000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000 + 0x00000000 0x04000040 0x00000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-cubox-i.dts b/arch/arm/boot/dts/imx6dl-cubox-i.dts index 2a43917d048e..f10a36b8647d 100644 --- a/arch/arm/boot/dts/imx6dl-cubox-i.dts +++ b/arch/arm/boot/dts/imx6dl-cubox-i.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index d5c966031962..39c2602fa87c 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-icore-rqs.dts b/arch/arm/boot/dts/imx6dl-icore-rqs.dts new file mode 100644 index 000000000000..cf42c2f5cdc7 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-icore-rqs.dts @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2016 Amarula Solutions B.V. + * Copyright (C) 2016 Engicam S.r.l. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-icore-rqs.dtsi" + +/ { + model = "Engicam i.CoreM6 DualLite/Solo RQS Starter Kit"; + compatible = "engicam,imx6-icore-rqs", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/imx6dl-icore.dts new file mode 100644 index 000000000000..6de83c72bd72 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-icore.dts @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2016 Amarula Solutions B.V. + * Copyright (C) 2016 Engicam S.r.l. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-icore.dtsi" + +/ { + model = "Engicam i.CoreM6 DualLite/Solo Starter Kit"; + compatible = "engicam,imx6-icore", "fsl,imx6dl"; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-nit6xlite.dts b/arch/arm/boot/dts/imx6dl-nit6xlite.dts index e0161e46195c..30ce2c0cec2b 100644 --- a/arch/arm/boot/dts/imx6dl-nit6xlite.dts +++ b/arch/arm/boot/dts/imx6dl-nit6xlite.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts index 8398f979b912..ec53d7a09572 100644 --- a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 75d73437adf7..2cb72824e800 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -390,7 +390,7 @@ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 /* AR8035 pin strapping: MODE#3: pull up */ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 /* AR8035 pin strapping: MODE#0: pull down */ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 /* GPIO16 -> AR8035 25MHz */ - MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0 /* RGMII_nRST */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0 /* RGMII_nRST */ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x180b0 /* AR8035 interrupt */ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 >; diff --git a/arch/arm/boot/dts/imx6dl-sabrelite.dts b/arch/arm/boot/dts/imx6dl-sabrelite.dts index 0f06ca5c9146..2f904527a097 100644 --- a/arch/arm/boot/dts/imx6dl-sabrelite.dts +++ b/arch/arm/boot/dts/imx6dl-sabrelite.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-savageboard.dts b/arch/arm/boot/dts/imx6dl-savageboard.dts new file mode 100644 index 000000000000..b95469c520a4 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-savageboard.dts @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2017 Milo Kim <woogyom.kim@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-savageboard.dtsi" + +/ { + model = "Poslab SavageBoard Dual"; + compatible = "poslab,imx6dl-savageboard", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-ts4900.dts b/arch/arm/boot/dts/imx6dl-ts4900.dts index 85eddeb30e21..6ea0b780677d 100644 --- a/arch/arm/boot/dts/imx6dl-ts4900.dts +++ b/arch/arm/boot/dts/imx6dl-ts4900.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts index 063fe7510da5..aac42ac465b6 100644 --- a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts +++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts @@ -105,7 +105,7 @@ pixelclk-active = <1>; }; }; - }; + }; }; &can1 { diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts index b7a72840b7f0..d1f1298ec55a 100644 --- a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts +++ b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts @@ -199,7 +199,7 @@ pixelclk-active = <0>; }; }; - }; + }; }; &ipu1_di0_disp0 { diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 1ade1951e620..7aa120fbdc71 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -137,7 +137,7 @@ &gpio4 { gpio-ranges = <&iomuxc 5 136 1>, <&iomuxc 6 145 1>, <&iomuxc 7 150 1>, <&iomuxc 8 146 1>, <&iomuxc 9 151 1>, <&iomuxc 10 147 1>, - <&iomuxc 11 151 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>, + <&iomuxc 11 152 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>, <&iomuxc 14 149 1>, <&iomuxc 15 154 1>, <&iomuxc 16 39 7>, <&iomuxc 23 56 1>, <&iomuxc 24 61 7>, <&iomuxc 31 46 1>; }; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts index 207b85b91ada..88cc7f51a4e9 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -147,28 +147,6 @@ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; }; }; - - pwmleds { - compatible = "pwm-leds"; - - ledpwm1 { - label = "PWM1"; - pwms = <&pwm1 0 50000>; - max-brightness = <255>; - }; - - ledpwm2 { - label = "PWM2"; - pwms = <&pwm2 0 50000>; - max-brightness = <255>; - }; - - ledpwm3 { - label = "PWM3"; - pwms = <&pwm3 0 50000>; - max-brightness = <255>; - }; - }; }; &backlight { diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts index 78bfc1a307d6..116bebb5e435 100644 --- a/arch/arm/boot/dts/imx6q-b450v3.dts +++ b/arch/arm/boot/dts/imx6q-b450v3.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts index d85388725426..33f5c436c09f 100644 --- a/arch/arm/boot/dts/imx6q-b650v3.dts +++ b/arch/arm/boot/dts/imx6q-b650v3.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -98,3 +98,9 @@ line-name = "PCA9539-P05"; }; }; + +&usbphy1 { + fsl,tx-cal-45-dn-ohms = <55>; + fsl,tx-cal-45-dp-ohms = <55>; + fsl,tx-d-cal = <100>; +}; diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts index 167f7446722a..d78514c92349 100644 --- a/arch/arm/boot/dts/imx6q-b850v3.dts +++ b/arch/arm/boot/dts/imx6q-b850v3.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index 308e11cea1db..14fa6b25dc45 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -13,17 +13,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -133,7 +133,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi index e4a415fd899b..36d6bb39593a 100644 --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -95,7 +95,6 @@ }; &ecspi5 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi5>; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index 59bc5a4dce17..d8a5789a4bc8 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -89,6 +89,14 @@ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-out; + spdif-in; + }; }; &cpu0 { @@ -114,7 +122,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; @@ -183,7 +190,6 @@ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 >; }; @@ -223,6 +229,13 @@ >; }; + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 + MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0 + >; + }; + pinctrl_uart4: uart4grp { fsl,pins = < MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 @@ -260,6 +273,12 @@ status = "okay"; }; +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif>; + status = "okay"; +}; + &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>; diff --git a/arch/arm/boot/dts/imx6q-cubox-i.dts b/arch/arm/boot/dts/imx6q-cubox-i.dts index 353425edcdf4..b68aa0e57f20 100644 --- a/arch/arm/boot/dts/imx6q-cubox-i.dts +++ b/arch/arm/boot/dts/imx6q-cubox-i.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index 908dab68bdca..f28883bbe7b1 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -104,7 +104,6 @@ &ecspi5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi5>; - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio1 12 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts index 6de21ff47c3a..fd2220aa49e2 100644 --- a/arch/arm/boot/dts/imx6q-evi.dts +++ b/arch/arm/boot/dts/imx6q-evi.dts @@ -90,7 +90,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1cs>; @@ -98,7 +97,6 @@ }; &ecspi3 { - fsl,spi-num-chipselects = <3>; cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>, <&gpio4 25 GPIO_ACTIVE_LOW>, <&gpio4 26 GPIO_ACTIVE_LOW>; @@ -108,7 +106,6 @@ }; &ecspi5 { - fsl,spi-num-chipselects = <4>; cs-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>, <&gpio1 13 GPIO_ACTIVE_LOW>, <&gpio1 12 GPIO_ACTIVE_LOW>, @@ -232,10 +229,7 @@ }; &weim { - #address-cells = <2>; - #size-cells = <1>; ranges = <0 0 0x08000000 0x08000000>; - fsl,weim-cs-gpr = <&gpr>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_weimfpga &pinctrl_weimcs>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 747bc104ad00..8e84713f42c0 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -138,7 +138,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts index 65e66f994f88..8f9252889971 100644 --- a/arch/arm/boot/dts/imx6q-h100.dts +++ b/arch/arm/boot/dts/imx6q-h100.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-hummingboard.dts b/arch/arm/boot/dts/imx6q-hummingboard.dts index 1884c16784e2..69a7a0a1cb21 100644 --- a/arch/arm/boot/dts/imx6q-hummingboard.dts +++ b/arch/arm/boot/dts/imx6q-hummingboard.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-icore-rqs.dts b/arch/arm/boot/dts/imx6q-icore-rqs.dts index 005318865f66..e451b4ceb4d8 100644 --- a/arch/arm/boot/dts/imx6q-icore-rqs.dts +++ b/arch/arm/boot/dts/imx6q-icore-rqs.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -45,7 +45,7 @@ #include "imx6qdl-icore-rqs.dtsi" / { - model = "Engicam i.CoreM6 Quad SOM"; + model = "Engicam i.CoreM6 Quad/Dual RQS Starter Kit"; compatible = "engicam,imx6-icore-rqs", "fsl,imx6q"; sound { diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/imx6q-icore.dts new file mode 100644 index 000000000000..59eb7adc2472 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-icore.dts @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2016 Amarula Solutions B.V. + * Copyright (C) 2016 Engicam S.r.l. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-icore.dtsi" + +/ { + model = "Engicam i.CoreM6 Quad/Dual Starter Kit"; + compatible = "engicam,imx6-icore", "fsl,imx6q"; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts index f7995c513b67..432291bedcf1 100644 --- a/arch/arm/boot/dts/imx6q-marsboard.dts +++ b/arch/arm/boot/dts/imx6q-marsboard.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -97,7 +97,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; - fsl,spi-num-chipselects = <1>; status = "okay"; m25p80@0 { diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts new file mode 100644 index 000000000000..eedbe737420c --- /dev/null +++ b/arch/arm/boot/dts/imx6q-mccmon6.dts @@ -0,0 +1,473 @@ +/* + * Copyright 2016-2017 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/dts-v1/; + +#include "imx6q.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Liebherr (LWN) monitor6 i.MX6 Quad Board"; + compatible = "lwn,mccmon6", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x80000000>; + }; + + backlight_lvds: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + pwms = <&pwm2 0 5000000 PWM_POLARITY_INVERTED>; + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100 101 102 103 104 105 106 107 108 109 + 110 111 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 128 129 + 130 131 132 133 134 135 136 137 138 139 + 140 141 142 143 144 145 146 147 148 149 + 150 151 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 168 169 + 170 171 172 173 174 175 176 177 178 179 + 180 181 182 183 184 185 186 187 188 189 + 190 191 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 208 209 + 210 211 212 213 214 215 216 217 218 219 + 220 221 222 223 224 225 226 227 228 229 + 230 231 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 248 249 + 250 251 252 253 254 255>; + default-brightness-level = <50>; + enable-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; + + reg_lvds: regulator-lvds { + compatible = "regulator-fixed"; + regulator-name = "lvds_ppen"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_lvds>; + gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + panel-lvds0 { + compatible = "innolux,g121x1-l03"; + backlight = <&backlight_lvds>; + power-supply = <®_lvds>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&ecspi3 { + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs &pinctrl_ecspi3_flwp>; + status = "okay"; + + s25sl032p: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <40000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pfuze100: pmic@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; +}; + +&pwm2 { + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + uart-has-rtscts; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&weim { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>; + ranges = <0 0 0x08000000 0x08000000>; + status = "okay"; + + nor@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + use-advanced-sector-protection; + fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000 + 0x0000c000 0x1404a38e 0x00000000>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + + pinctrl_backlight: dispgrp { + fsl,pins = < + /* BLEN_OUT */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + >; + }; + + pinctrl_ecspi3_cs: ecspi3csgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 + >; + }; + + pinctrl_ecspi3_flwp: ecspi3flwpgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x80000000 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_reg_lvds: reqlvdsgrp { + fsl,pins = < + /* LVDS_PPEN_OUT */ + MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b1 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 + >; + }; + + pinctrl_weim_cs0: weimcs0grp { + fsl,pins = < + MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1 + >; + }; + + pinctrl_weim_nor: weimnorgrp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1 + MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1 + MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060 + MX6QDL_PAD_EIM_D16__EIM_DATA16 0x1b0b0 + MX6QDL_PAD_EIM_D17__EIM_DATA17 0x1b0b0 + MX6QDL_PAD_EIM_D18__EIM_DATA18 0x1b0b0 + MX6QDL_PAD_EIM_D19__EIM_DATA19 0x1b0b0 + MX6QDL_PAD_EIM_D20__EIM_DATA20 0x1b0b0 + MX6QDL_PAD_EIM_D21__EIM_DATA21 0x1b0b0 + MX6QDL_PAD_EIM_D22__EIM_DATA22 0x1b0b0 + MX6QDL_PAD_EIM_D23__EIM_DATA23 0x1b0b0 + MX6QDL_PAD_EIM_D24__EIM_DATA24 0x1b0b0 + MX6QDL_PAD_EIM_D25__EIM_DATA25 0x1b0b0 + MX6QDL_PAD_EIM_D26__EIM_DATA26 0x1b0b0 + MX6QDL_PAD_EIM_D27__EIM_DATA27 0x1b0b0 + MX6QDL_PAD_EIM_D28__EIM_DATA28 0x1b0b0 + MX6QDL_PAD_EIM_D29__EIM_DATA29 0x1b0b0 + MX6QDL_PAD_EIM_D30__EIM_DATA30 0x1b0b0 + MX6QDL_PAD_EIM_D31__EIM_DATA31 0x1b0b0 + MX6QDL_PAD_EIM_A23__EIM_ADDR23 0xb0b1 + MX6QDL_PAD_EIM_A22__EIM_ADDR22 0xb0b1 + MX6QDL_PAD_EIM_A21__EIM_ADDR21 0xb0b1 + MX6QDL_PAD_EIM_A20__EIM_ADDR20 0xb0b1 + MX6QDL_PAD_EIM_A19__EIM_ADDR19 0xb0b1 + MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0b1 + MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0b1 + MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0b1 + MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1 + MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1 + MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1 + MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1 + MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1 + MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1 + MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1 + MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1 + MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1 + MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1 + MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1 + MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1 + MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1 + MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1 + MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1 + MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts index d417457ca6db..2a3c44f98eed 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts new file mode 100644 index 000000000000..c5d59baa1a07 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts @@ -0,0 +1,53 @@ +/* + * Copyright 2016 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-nitrogen6_som2.dtsi" + +/ { + model = "Boundary Devices i.MX6 Quad Nitrogen6_SOM2 Board"; + compatible = "boundary,imx6q-nitrogen6_som2", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts index d1686339dc48..df8ff397a914 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6x.dts @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts index 1723e89e3acc..0fa32b2f3aec 100644 --- a/arch/arm/boot/dts/imx6q-novena.dts +++ b/arch/arm/boot/dts/imx6q-novena.dts @@ -210,7 +210,6 @@ &ecspi3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3_novena>; - fsl,spi-num-chipselects = <3>; status = "okay"; }; @@ -451,6 +450,10 @@ status = "okay"; }; +&pwm1 { + status = "okay"; +}; + &sata { target-supply = <®_sata>; fsl,transmit-level-mV = <1025>; diff --git a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts index c139ac0ebe15..1f4771304da8 100644 --- a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts +++ b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts @@ -23,5 +23,5 @@ }; &sata { - status = "okay"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 66d10d8d534c..02a7cdfd57c9 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-savageboard.dts b/arch/arm/boot/dts/imx6q-savageboard.dts new file mode 100644 index 000000000000..717ac62fc2cf --- /dev/null +++ b/arch/arm/boot/dts/imx6q-savageboard.dts @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2017 Milo Kim <woogyom.kim@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-savageboard.dtsi" + +/ { + model = "Poslab SavageBoard Quad"; + compatible = "poslab,imx6q-savageboard", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-ts4900.dts b/arch/arm/boot/dts/imx6q-ts4900.dts index 9b81ebc8b0d4..fab76f8cd076 100644 --- a/arch/arm/boot/dts/imx6q-ts4900.dts +++ b/arch/arm/boot/dts/imx6q-ts4900.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts index 65e95ae7509a..71746edc2ee9 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts @@ -105,7 +105,7 @@ pixelclk-active = <1>; }; }; - }; + }; }; &can1 { diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts index 20cd0e7b3e21..f9cd21a41a79 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1010.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1010.dts @@ -199,7 +199,7 @@ pixelclk-active = <0>; }; }; - }; + }; }; &ipu1_di0_disp0 { diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts index 9ed243b704ff..959ff3fb7304 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts @@ -105,7 +105,7 @@ pixelclk-active = <1>; }; }; - }; + }; }; &can1 { diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/imx6q-tx6q-1020.dts index 347b531d3763..b49133d25d80 100644 --- a/arch/arm/boot/dts/imx6q-tx6q-1020.dts +++ b/arch/arm/boot/dts/imx6q-tx6q-1020.dts @@ -199,7 +199,7 @@ pixelclk-active = <0>; }; }; - }; + }; }; &ds1339 { diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts index 61990630a748..69bdd82ce21f 100644 --- a/arch/arm/boot/dts/imx6q-utilite-pro.dts +++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts @@ -59,6 +59,33 @@ rtc1 = &snvs_rtc; }; + encoder { + compatible = "ti,tfp410"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint { + remote-endpoint = <¶llel_display_out>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -68,11 +95,96 @@ label = "Power Button"; gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + + type = "a"; + ddc-i2c-bus = <&i2c_dvi_ddc>; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; + + i2cmux { + compatible = "i2c-mux-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1mux>; + #address-cells = <1>; + #size-cells = <0>; + + mux-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + i2c-parent = <&i2c1>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "at24,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + em3027: rtc@56 { + compatible = "emmicro,em3027"; + reg = <0x56>; + }; + }; + + i2c_dvi_ddc: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + parallel-display { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1>; + + interface-pix-fmt = "rgb24"; + + port@0 { + reg = <0>; + + parallel_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + parallel_display_out: endpoint { + remote-endpoint = <&tfp410_in>; + }; }; }; }; +/* + * A single IPU is not able to drive both display interfaces available on the + * Utilite Pro at high resolution due to its bandwidth limitation. Since the + * tfp410 encoder is wired up to IPU1, sever the link between IPU1 and the + * SoC-internal Designware HDMI encoder forcing the latter to be connected to + * IPU2 instead of IPU1. + */ +/delete-node/&ipu1_di0_hdmi; +/delete-node/&hdmi_mux_0; +/delete-node/&ipu1_di1_hdmi; +/delete-node/&hdmi_mux_1; + &hdmi { ddc-i2c-bus = <&i2c2>; status = "okay"; @@ -82,17 +194,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - - eeprom@50 { - compatible = "at24,24c02"; - reg = <0x50>; - pagesize = <16>; - }; - - em3027: rtc@56 { - compatible = "emmicro,em3027"; - reg = <0x56>; - }; }; &i2c2 { @@ -115,6 +216,12 @@ >; }; + pinctrl_i2c1mux: i2c1muxgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 @@ -122,6 +229,39 @@ >; }; + pinctrl_ipu1: ipu1grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x38 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x38 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x38 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x38 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x38 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x38 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x38 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x38 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x38 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x38 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x38 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x38 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x38 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x38 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x38 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x38 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x38 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x38 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x38 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x38 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x38 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x38 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x38 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x38 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x38 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x38 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x38 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x38 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b0b1 @@ -165,6 +305,10 @@ }; }; +&ipu1_di0_disp0 { + remote-endpoint = <¶llel_display_in>; +}; + &pcie { pcie@0,0 { reg = <0x000000 0 0 0 0>; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 99e323b57261..ba01dd76d887 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -49,7 +49,10 @@ backlight: backlight { compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_bl_on>; pwms = <&pwm4 0 5000000>; + enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -172,7 +175,6 @@ /* Apalis SPI1 */ &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; @@ -181,7 +183,6 @@ /* Apalis SPI2 */ &ecspi2 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; @@ -620,6 +621,12 @@ >; }; + pinctrl_gpio_bl_on: gpioblon { + fsl,pins = < + MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0 + >; + }; + pinctrl_gpio_keys: gpio1io04grp { fsl,pins = < /* Power button */ diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi index edbce222c782..550e100e85fc 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi @@ -176,7 +176,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <3>; cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 10 GPIO_ACTIVE_LOW>, <&gpio4 11 GPIO_ACTIVE_LOW>; @@ -347,13 +346,13 @@ fsl,pins = < MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x100b1 MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1 - MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x100b1 - MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x100b1 - MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x100b1 - MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x100b1 - MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x100b1 - MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x100b1 - MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x100b1 + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x100b1 + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x100b1 + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x100b1 + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x100b1 + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x100b1 + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x100b1 + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x100b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi index 54f4f0193f2b..b2debc0aa720 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi @@ -100,7 +100,6 @@ }; &ecspi4 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 20 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi4>; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index 7fff02c406f2..ec68f1cace31 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -114,7 +114,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <3>; cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH &gpio4 10 GPIO_ACTIVE_HIGH &gpio4 11 GPIO_ACTIVE_HIGH>; @@ -124,7 +123,6 @@ }; &ecspi2 { - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH &gpio2 27 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; @@ -132,7 +130,6 @@ }; &ecspi4 { - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi4>; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi new file mode 100644 index 000000000000..e8078758f26c --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -0,0 +1,889 @@ +/* + * Copyright 2014-2016 Toradex AG + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Toradex Colibri iMX6DL/S Module"; + compatible = "toradex,colibri_imx6dl", "fsl,imx6dl"; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_bl_on>; + pwms = <&pwm3 0 5000000>; + enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */ + status = "disabled"; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_host_vbus: regulator-usb-host-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; + regulator-name = "usb_host_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */ + status = "disabled"; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx6dl-colibri-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "Headphone Jack", "HP_OUT", + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias"; + mux-int-port = <1>; + mux-ext-port = <5>; + }; + + /* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */ + sound_spdif: sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-in; + spdif-out; + status = "disabled"; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux &pinctrl_mic_gnd>; + status = "okay"; +}; + +/* Optional on SODIMM 55/63 */ +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "disabled"; +}; + +/* Optional on SODIMM 178/188 */ +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "disabled"; +}; + +/* Colibri SSP */ +&ecspi4 { + cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + status = "disabled"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + status = "okay"; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi_ddc>; + status = "disabled"; +}; + +/* + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and + * touch screen controller + */ +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + regulator-boot-on; + regulator-always-on; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + /* vgen1: unused */ + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vgen3: unused */ + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + /* STMPE811 touch screen controller */ + stmpe811@41 { + compatible = "st,stmpe811"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_int>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio6>; + interrupt-controller; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + reg = <0>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 7 length fractional part in z */ + st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + }; + }; +}; + +/* + * I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) + */ +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default", "recovery"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_recovery>; + scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + status = "disabled"; +}; + +/* Colibri PWM<B> */ +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "disabled"; +}; + +/* Colibri PWM<D> */ +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "disabled"; +}; + +/* Colibri PWM<A> */ +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "disabled"; +}; + +/* Colibri PWM<C> */ +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "disabled"; +}; + +/* Optional S/PDIF out on SODIMM 137 */ +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif>; + status = "disabled"; +}; + +&ssi1 { + status = "okay"; +}; + +/* Colibri UART_A */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>; + fsl,dte-mode; + uart-has-rtscts; + status = "disabled"; +}; + +/* Colibri UART_B */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_dte>; + fsl,dte-mode; + uart-has-rtscts; + status = "disabled"; +}; + +/* Colibri UART_C */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_dte>; + fsl,dte-mode; + status = "disabled"; +}; + +&usbotg { + pinctrl-names = "default"; + disable-over-current; + dr_mode = "peripheral"; + status = "disabled"; +}; + +/* Colibri MMC */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + vqmmc-supply = <®_3p3v>; + bus-width = <4>; + voltage-ranges = <3300 3300>; + status = "disabled"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + vqmmc-supply = <®_3p3v>; + bus-width = <8>; + voltage-ranges = <3300 3300>; + non-removable; + status = "okay"; +}; + +&weim { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_weim_sram &pinctrl_weim_cs0 + &pinctrl_weim_cs1 &pinctrl_weim_cs2 + &pinctrl_weim_rdnwr &pinctrl_weim_npwe>; + #address-cells = <2>; + #size-cells = <1>; + status = "disabled"; +}; + +&iomuxc { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x130b0 + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 + MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0 + /* SGTL5000 sys_mclk */ + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + >; + }; + + pinctrl_cam_mclk: cammclkgrp { + fsl,pins = < + /* Parallel Camera CAM sys_mclk */ + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0 + >; + }; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 + MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 + MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 + /* SPI CS */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK ((1<<30) | 0x1b0b0) + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_gpio_bl_on: gpioblon { + fsl,pins = < + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b0 + >; + }; + + pinctrl_gpio_keys: gpiokeys { + fsl,pins = < + /* Power button */ + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 + >; + }; + + pinctrl_hdmi_ddc: hdmiddcgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3_recovery: i2c3recoverygrp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1 + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1 + >; + }; + + pinctrl_ipu1_csi0: ipu1csi0grp { /* Parallel Camera */ + fsl,pins = < + MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12 0xb0b1 + MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13 0xb0b1 + MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14 0xb0b1 + MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15 0xb0b1 + MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16 0xb0b1 + MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17 0xb0b1 + MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18 0xb0b1 + MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19 0xb0b1 + MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK 0xb0b1 + MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0xb0b1 + MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0xb0b1 + /* Disable PWM pins on camera interface */ + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x40 + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x40 + >; + }; + + pinctrl_ipu1_lcdif: ipu1lcdifgrp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0xa1 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0xa1 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0xa1 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0xa1 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xa1 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xa1 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xa1 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xa1 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xa1 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xa1 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xa1 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xa1 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xa1 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xa1 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xa1 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xa1 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xa1 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xa1 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xa1 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xa1 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xa1 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xa1 + >; + }; + + pinctrl_mic_gnd: gpiomicgnd { + fsl,pins = < + /* Controls Mic GND, PU or '1' pull Mic GND to GND */ + MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0 + >; + }; + + pinctrl_mmc_cd: gpiommccd { + fsl,pins = < + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x80000000 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 + MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x00040 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x00040 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp { + fsl,pins = < + /* USBH_EN */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x0f058 + >; + }; + + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 + >; + }; + + pinctrl_touch_int: gpiotouchintgrp { + fsl,pins = < + /* STMPE811 interrupt */ + MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x1b0b0 + >; + }; + + pinctrl_uart1_dce: uart1dcegrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + /* DTE mode */ + pinctrl_uart1_dte: uart1dtegrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1 + >; + }; + + /* Additional DTR, DSR, DCD */ + pinctrl_uart1_ctrl: uart1ctrlgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0 + MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0 + MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0 + >; + }; + + pinctrl_uart2_dte: uart2dtegrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart3_dte: uart3dtegrp { + fsl,pins = < + MX6QDL_PAD_SD4_CLK__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_CMD__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbc_det: usbcdetgrp { + fsl,pins = < + /* USBC_DET */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + /* USBC_DET_EN */ + MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x0f058 + /* USBC_DET_OVERWRITE */ + MX6QDL_PAD_RGMII_RXC__GPIO6_IO30 0x0f058 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + /* eMMC reset */ + MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3100mhzgrp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 + /* eMMC reset */ + MX6QDL_PAD_SD3_RST__SD3_RESET 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3200mhzgrp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 + /* eMMC reset */ + MX6QDL_PAD_SD3_RST__SD3_RESET 0x170f9 + >; + }; + + pinctrl_weim_cs0: weimcs0grp { + fsl,pins = < + /* nEXT_CS0 */ + MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1 + >; + }; + + pinctrl_weim_cs1: weimcs1grp { + fsl,pins = < + /* nEXT_CS1 */ + MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0b1 + >; + }; + + pinctrl_weim_cs2: weimcs2grp { + fsl,pins = < + /* nEXT_CS2 */ + MX6QDL_PAD_SD2_DAT1__EIM_CS2_B 0xb0b1 + >; + }; + + pinctrl_weim_sram: weimsramgrp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1 + MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1 + /* Data */ + MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0 + MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0 + MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0 + MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0 + MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0 + MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0 + /* Address */ + MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1 + MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1 + MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1 + MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1 + MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1 + MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1 + MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1 + MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1 + MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1 + MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1 + MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1 + MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1 + MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1 + MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1 + MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1 + MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1 + >; + }; + + pinctrl_weim_rdnwr: weimrdnwr { + fsl,pins = < + MX6QDL_PAD_SD2_CLK__GPIO1_IO10 0x0040 + MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x130b0 + >; + }; + + pinctrl_weim_npwe: weimnpwe { + fsl,pins = < + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x0040 + MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x130b0 + >; + }; + + /* ADDRESS[16:18] [25] used as GPIO */ + pinctrl_weim_gpio_1: weimgpio-1 { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + >; + }; + + /* ADDRESS[19:24] used as GPIO */ + pinctrl_weim_gpio_2: weimgpio-2 { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + >; + }; + + /* DATA[16:31] used as GPIO */ + pinctrl_weim_gpio_3: weimgpio-3 { + fsl,pins = < + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b0 + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x1b0b0 + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0 + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + + /* DQM[0:3] used as GPIO */ + pinctrl_weim_gpio_4: weimgpio-4 { + fsl,pins = < + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0 + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0 + MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0 + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + >; + }; + + /* RDY used as GPIO */ + pinctrl_weim_gpio_5: weimgpio-5 { + fsl,pins = < + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b0 + >; + }; + + /* ADDRESS[16] DATA[30] used as GPIO */ + pinctrl_weim_gpio_6: weimgpio-6 { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index ff41f83551de..14fff4ee6516 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi index b2c083d57598..d78312c63672 100644 --- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi @@ -29,7 +29,6 @@ }; &ecspi3 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 24 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index afec2c7628ef..e8c1edc82e6e 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -56,38 +56,29 @@ status = "okay"; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_3p3v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - reg_5p0v: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "5P0V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - reg_usb_otg_vbus: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; }; }; @@ -158,6 +149,81 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + regulators { + /* VDD_SOC (1+R1/R2 = 1.635) */ + reg_vdd_soc: sw1 { + regulator-name = "vddsoc"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */ + reg_1p8v: sw2 { + regulator-name = "vdd1p8"; + regulator-min-microvolt = <1033310>; + regulator-max-microvolt = <2004000>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_ARM (1+R1/R2 = 1.635) */ + reg_vdd_arm: sw3 { + regulator-name = "vddarm"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_DDR (1+R1/R2 = 2.105) */ + reg_vdd_ddr: sw4 { + regulator-name = "vddddr"; + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <1684000>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */ + reg_2p5v: ldo2 { + regulator-name = "vdd2p5"; + regulator-min-microvolt = <2490375>; + regulator-max-microvolt = <2490375>; + lltc,fb-voltage-divider = <487000 200000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_HIGH (1+R1/R2 = 4.17) */ + reg_3p0v: ldo4 { + regulator-name = "vdd3p0"; + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &i2c3 { @@ -312,6 +378,12 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; + pinctrl_pps: ppsgrp { fsl,pins = < MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index a7100f99123e..91991d63a69c 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -71,57 +71,37 @@ status = "okay"; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_1p0v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "1P0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - /* remove this fixed regulator once ltc3676__sw2 driver available */ - reg_1p8v: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "1P8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; + reg_1p0v: regulator-1p0v { + compatible = "regulator-fixed"; + regulator-name = "1P0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; - reg_3p3v: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - reg_5p0v: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "5P0V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - reg_usb_otg_vbus: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; }; sound { @@ -153,13 +133,12 @@ &clks { assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, - <&clks IMX6QDL_CLK_PLL3_USB_OTG>; + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; }; &ecspi3 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; @@ -233,6 +212,89 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + regulators { + /* VDD_SOC (1+R1/R2 = 1.635) */ + reg_vdd_soc: sw1 { + regulator-name = "vddsoc"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */ + reg_1p8v: sw2 { + regulator-name = "vdd1p8"; + regulator-min-microvolt = <1033310>; + regulator-max-microvolt = <2004000>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_ARM (1+R1/R2 = 1.635) */ + reg_vdd_arm: sw3 { + regulator-name = "vddarm"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_DDR (1+R1/R2 = 2.105) */ + reg_vdd_ddr: sw4 { + regulator-name = "vddddr"; + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <1684000>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */ + reg_2p5v: ldo2 { + regulator-name = "vdd2p5"; + regulator-min-microvolt = <2490375>; + regulator-max-microvolt = <2490375>; + lltc,fb-voltage-divider = <487000 200000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_AUD_1P8: Audio codec */ + reg_aud_1p8v: ldo3 { + regulator-name = "vdd1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + /* VDD_HIGH (1+R1/R2 = 4.17) */ + reg_3p0v: ldo4 { + regulator-name = "vdd3p0"; + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &i2c3 { @@ -467,6 +529,12 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; + pinctrl_pps: ppsgrp { fsl,pins = < MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 8953eba0573d..a208e7e0dc6e 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -72,57 +72,37 @@ status = "okay"; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_1p0v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "1P0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - /* remove when pmic 1p8 regulator available */ - reg_1p8v: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "1P8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; + reg_1p0v: regulator-1p0v { + compatible = "regulator-fixed"; + regulator-name = "1P0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; - reg_3p3v: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - reg_usb_h1_vbus: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - reg_usb_otg_vbus: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; }; sound { @@ -154,9 +134,9 @@ &clks { assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, - <&clks IMX6QDL_CLK_PLL3_USB_OTG>; + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; }; &fec { @@ -226,6 +206,87 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + reg = <0x3c>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + regulators { + /* VDD_SOC (1+R1/R2 = 1.635) */ + reg_vdd_soc: sw1 { + regulator-name = "vddsoc"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */ + reg_1p8v: sw2 { + regulator-name = "vdd1p8"; + regulator-min-microvolt = <1033310>; + regulator-max-microvolt = <2004000>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_ARM (1+R1/R2 = 1.635) */ + reg_vdd_arm: sw3 { + regulator-name = "vddarm"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_DDR (1+R1/R2 = 2.105) */ + reg_vdd_ddr: sw4 { + regulator-name = "vddddr"; + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <1684000>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */ + reg_2p5v: ldo2 { + regulator-name = "vdd2p5"; + regulator-min-microvolt = <2490375>; + regulator-max-microvolt = <2490375>; + lltc,fb-voltage-divider = <487000 200000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_AUD_1P8: Audio codec */ + reg_aud_1p8v: ldo3 { + regulator-name = "vdd1p8a"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + /* VDD_HIGH (1+R1/R2 = 4.17) */ + reg_3p0v: ldo4 { + regulator-name = "vdd3p0"; + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &i2c3 { @@ -456,6 +517,12 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; + pinctrl_pps: ppsgrp { fsl,pins = < MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 6ac41c7ed32e..968fda94d14b 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -144,9 +144,16 @@ &clks { assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, - <&clks IMX6QDL_CLK_PLL3_USB_OTG>; + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&ecspi2 { + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; }; &fec { @@ -499,6 +506,15 @@ >; }; + pinctrl_ecspi2: escpi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 + >; + }; + pinctrl_flexcan1: flexcan1grp { fsl,pins = < MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi index 4b9fef834822..405b40310ddf 100644 --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi @@ -78,34 +78,25 @@ reg = <0x10000000 0x20000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_5p0v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "5P0V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; - reg_usb_h1_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; - reg_usb_otg_vbus: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; }; }; @@ -174,6 +165,89 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + regulators { + /* VDD_SOC (1+R1/R2 = 1.635) */ + reg_vdd_soc: sw1 { + regulator-name = "vddsoc"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_DDR (1+R1/R2 = 2.105) */ + reg_vdd_ddr: sw2 { + regulator-name = "vddddr"; + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <1684000>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_ARM (1+R1/R2 = 1.635) */ + reg_vdd_arm: sw3 { + regulator-name = "vddarm"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_3P3 (1+R1/R2 = 1.281) */ + reg_3p3: sw4 { + regulator-name = "vdd3p3"; + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <3647000>; + lltc,fb-voltage-divider = <200000 56200>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P8a (1+R1/R2 = 2.505): HDMI In core */ + reg_1p8a: ldo2 { + regulator-name = "vdd1p8a"; + regulator-min-microvolt = <1816125>; + regulator-max-microvolt = <1816125>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P8b: HDMI In analog */ + reg_1p8b: ldo3 { + regulator-name = "vdd1p8b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + /* VDD_HIGH (1+R1/R2 = 4.17) */ + reg_3p0: ldo4 { + regulator-name = "vdd3p0"; + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &i2c3 { @@ -308,6 +382,12 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; + pinctrl_pwm2: pwm2grp { fsl,pins = < MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi index 805e23674a94..67613dd7cc92 100644 --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -55,37 +55,28 @@ reg = <0x10000000 0x20000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_1p0v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "1P0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; + reg_1p0v: regulator-1p0v { + compatible = "regulator-fixed"; + regulator-name = "1P0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; - reg_3p3v: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - reg_5p0v: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "5P0V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; }; }; @@ -148,6 +139,81 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + regulators { + /* VDD_SOC (1+R1/R2 = 1.635) */ + reg_vdd_soc: sw1 { + regulator-name = "vddsoc"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P8 (1+R1/R2 = 2.505): ENET-PHY */ + reg_1p8v: sw2 { + regulator-name = "vdd1p8"; + regulator-min-microvolt = <1033310>; + regulator-max-microvolt = <2004000>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_ARM (1+R1/R2 = 1.635) */ + reg_vdd_arm: sw3 { + regulator-name = "vddarm"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_DDR (1+R1/R2 = 2.105) */ + reg_vdd_ddr: sw4 { + regulator-name = "vddddr"; + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <1684000>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */ + reg_2p5v: ldo2 { + regulator-name = "vdd2p5"; + regulator-min-microvolt = <2490375>; + regulator-max-microvolt = <2490375>; + lltc,fb-voltage-divider = <487000 200000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_HIGH (1+R1/R2 = 4.17) */ + reg_3p0v: ldo4 { + regulator-name = "vdd3p0"; + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &i2c3 { @@ -260,6 +326,12 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; + pinctrl_pwm2: pwm2grp { fsl,pins = < MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 @@ -291,7 +363,7 @@ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 >; - }; + }; pinctrl_wdog: wdoggrp { fsl,pins = < diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi index 86cec0527f73..57374dddf98d 100644 --- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi @@ -92,14 +92,6 @@ status = "okay"; }; - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P0V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - reg_5p0v: regulator-5p0v { compatible = "regulator-fixed"; regulator-name = "5P0V"; @@ -179,6 +171,89 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + regulators { + /* VDD_SOC (1+R1/R2 = 1.635) */ + reg_vdd_soc: sw1 { + regulator-name = "vddsoc"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_DDR (1+R1/R2 = 2.105) */ + reg_vdd_ddr: sw2 { + regulator-name = "vddddr"; + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <1684000>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_ARM (1+R1/R2 = 1.635) */ + reg_vdd_arm: sw3 { + regulator-name = "vddarm"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_3P3 (1+R1/R2 = 1.281) */ + reg_3p3v: sw4 { + regulator-name = "vdd3p3"; + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <3647000>; + lltc,fb-voltage-divider = <200000 56200>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P8a (1+R1/R2 = 2.505): Analog Video Decoder */ + reg_1p8a: ldo2 { + regulator-name = "vdd1p8a"; + regulator-min-microvolt = <1816125>; + regulator-max-microvolt = <1816125>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P8b: microSD VDD_1P8 */ + reg_1p8b: ldo3 { + regulator-name = "vdd1p8b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + /* VDD_HIGH (1+R1/R2 = 4.17) */ + reg_3p0v: ldo4 { + regulator-name = "vdd3p0"; + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &i2c3 { @@ -255,7 +330,6 @@ pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; - vmmc-supply = <®_3p3v>; status = "okay"; }; @@ -327,6 +401,12 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; + pinctrl_pps: ppsgrp { fsl,pins = < MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index d6c2358ffad4..988334c889eb 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi index d5c3aa88adbe..5fab5be414fe 100644 --- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -223,7 +223,7 @@ pinctrl-2 = <&pinctrl_usdhc3_200mhz>; vmcc-supply = <®_sd3_vmmc>; cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; - bus-witdh=<4>; + bus-witdh = <4>; no-1-8-v; status = "okay"; }; @@ -234,7 +234,7 @@ pinctrl-1 = <&pinctrl_usdhc4_100mhz>; pinctrl-2 = <&pinctrl_usdhc4_200mhz>; vmcc-supply = <®_sd4_vmmc>; - bus-witdh=<8>; + bus-witdh = <8>; no-1-8-v; non-removable; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi new file mode 100644 index 000000000000..55bebfc9ad94 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi @@ -0,0 +1,265 @@ +/* + * Copyright (C) 2016 Amarula Solutions B.V. + * Copyright (C) 2016 Engicam S.r.l. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + memory { + reg = <0x10000000 0x80000000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + rmii_clk: clock-rmii-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; /* 25MHz for example */ + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_3p3v>; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_3p3v>; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>; + phy-mode = "rmii"; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + disable-over-current; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + no-1-8-v; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b1 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0 + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b020 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b020 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b020 + >; + }; + + pinctrl_gpmi_nand: gpmi-nand { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17070 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10070 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17070 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17070 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17070 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi index 469ef58ce4bc..a9b207751a02 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi @@ -13,17 +13,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi index 3d62401dbd7f..6a410160c9ee 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index 880bd782a5b7..6b81580623ff 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -97,15 +97,6 @@ }; }; - bt_rfkill { - compatible = "rfkill-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_bt_rfkill>; - gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; - name = "bt_rfkill"; - type = <2>; - }; - gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -160,7 +151,7 @@ }; }; - backlight_lcd { + backlight-lcd { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -169,7 +160,7 @@ status = "okay"; }; - backlight_lvds0: backlight_lvds0 { + backlight_lvds0: backlight-lvds0 { compatible = "pwm-backlight"; pwms = <&pwm4 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -178,7 +169,7 @@ status = "okay"; }; - panel_lvds0 { + panel-lvds0 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds0>; @@ -218,7 +209,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; @@ -328,19 +318,6 @@ >; }; - pinctrl_bt_rfkill: bt_rfkillgrp { - fsl,pins = < - /* BT wake */ - MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 - /* BT reset */ - MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0b0b0 - /* BT reg en */ - MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 - /* BT host wake irq */ - MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x100b0 - >; - }; - pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 @@ -374,7 +351,7 @@ >; }; - pinctrl_gpio_keys: gpio_keysgrp { + pinctrl_gpio_keys: gpio-keysgrp { fsl,pins = < /* Home Button: J14 pin 5 */ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 @@ -457,7 +434,7 @@ >; }; - pinctrl_wlan_vmmc: wlan_vmmcgrp { + pinctrl_wlan_vmmc: wlan-vmmcgrp { fsl,pins = < MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b0 >; @@ -537,8 +514,6 @@ status = "okay"; lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; status = "okay"; port@4 { diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index b0b3220a1fd9..bad3c9f9eeac 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -229,7 +229,7 @@ }; }; - backlight_lcd: backlight_lcd { + backlight_lcd: backlight-lcd { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -238,7 +238,7 @@ status = "okay"; }; - backlight_lvds0: backlight_lvds0 { + backlight_lvds0: backlight-lvds0 { compatible = "pwm-backlight"; pwms = <&pwm4 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -247,7 +247,7 @@ status = "okay"; }; - backlight_lvds1: backlight_lvds1 { + backlight_lvds1: backlight-lvds1 { compatible = "pwm-backlight"; pwms = <&pwm2 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -282,7 +282,7 @@ }; }; - panel_lcd { + panel-lcd { compatible = "okaya,rs800480t-7x0gp"; backlight = <&backlight_lcd>; @@ -293,7 +293,7 @@ }; }; - panel_lvds0 { + panel-lvds0 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds0>; @@ -304,7 +304,7 @@ }; }; - panel_lvds1 { + panel-lvds1 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds1>; @@ -319,8 +319,6 @@ compatible = "fsl,imx6q-nitrogen6_max-sgtl5000", "fsl,imx-audio-sgtl5000"; model = "imx6q-nitrogen6_max-sgtl5000"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sgtl5000>; ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = @@ -353,7 +351,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; @@ -402,6 +399,8 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_2p5v>; @@ -447,7 +446,7 @@ }; &iomuxc { - imx6q-nitrogen6_max { + imx6q-nitrogen6-max { pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 @@ -504,7 +503,7 @@ >; }; - pinctrl_gpio_keys: gpio_keysgrp { + pinctrl_gpio_keys: gpio-keysgrp { fsl,pins = < /* Power Button */ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 @@ -720,7 +719,7 @@ >; }; - pinctrl_wlan_vmmc: wlan_vmmcgrp { + pinctrl_wlan_vmmc: wlan-vmmcgrp { fsl,pins = < MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0 MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 @@ -739,8 +738,6 @@ status = "okay"; lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; status = "okay"; port@4 { @@ -753,8 +750,6 @@ }; lvds-channel@1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; status = "okay"; port@4 { diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi new file mode 100644 index 000000000000..559da17297ef --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -0,0 +1,767 @@ +/* + * Copyright 2016 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = &uart2; + }; + + memory { + reg = <0x10000000 0x40000000>; + }; + + backlight_lcd: backlight-lcd { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + backlight_lvds0: backlight-lvds0 { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + backlight_lvds1: backlight-lvds1 { + compatible = "gpio-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight_lvds1>; + gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; + default-on; + status = "okay"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + power { + label = "Power Button"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + + menu { + label = "Menu"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_MENU>; + }; + + home { + label = "Home"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + }; + + back { + label = "Back"; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + lcd_display: display@di0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_j15>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel-lcd { + compatible = "okaya,rs800480t-7x0gp"; + backlight = <&backlight_lcd>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + panel-lvds0 { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds0>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + panel-lvds1 { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds1>; + + port { + panel_in_lvds1: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; + }; + + reg_1p8v: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_2p5v: regulator-2v5 { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_can_xcvr: regulator-can-xcvr { + compatible = "regulator-fixed"; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_xcvr>; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wlan_vmmc: regulator-wlan-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + + sound { + compatible = "fsl,imx6q-nitrogen6_som2-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6q-nitrogen6_som2-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_can_xcvr>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&ecspi1 { + cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + compatible = "microchip,sst25vf016b"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + fsl,err006687-workaround-present; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; + reg = <0x0a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + rtc@68 { + compatible = "st,rv4162"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rv4162>; + reg = <0x68>; + interrupts-extended = <&gpio6 7 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + touchscreen@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&iomuxc { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_backlight_lvds1: backlight-lvds1grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x0b0b0 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_can_xcvr: can-xcvrgrp { + fsl,pins = < + /* Flexcan XCVR enable */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0b0b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x130b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x130b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x030b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + /* Power Button */ + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + /* Menu Button */ + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + /* Home Button */ + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + /* Back Button */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + /* Volume Up Button */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + /* Volume Down Button */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + >; + }; + + pinctrl_i2c3mux: i2c3muxgrp { + fsl,pins = < + /* PCIe I2C enable */ + MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x000b0 + >; + }; + + pinctrl_j15: j15grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + /* PCIe reset */ + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x030b0 + MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x030b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x030b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x030b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x030b1 + >; + }; + + pinctrl_rv4162: rv4162grp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 + >; + }; + + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x130b0 + MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x130b0 + MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x130b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x030b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x030b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071 + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10071 + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17071 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17071 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17071 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17071 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17071 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + + pinctrl_wlan_vmmc: wlan-vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x100b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x030b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x030b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; + + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds1_out: endpoint { + remote-endpoint = <&panel_in_lvds1>; + }; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wlan_vmmc>; + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = <38400000>; + }; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + vmmc-supply = <®_1p8v>; + keep-power-in-suspend; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index db868bc42c0f..70772ebadd4d 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -167,7 +167,7 @@ mux-ext-port = <3>; }; - backlight_lcd: backlight_lcd { + backlight_lcd: backlight-lcd { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -176,7 +176,7 @@ status = "okay"; }; - backlight_lvds: backlight_lvds { + backlight_lvds: backlight-lvds { compatible = "pwm-backlight"; pwms = <&pwm4 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -211,7 +211,7 @@ }; }; - lcd_panel { + panel-lcd { compatible = "okaya,rs800480t-7x0gp"; backlight = <&backlight_lcd>; @@ -222,7 +222,7 @@ }; }; - panel { + panel-lvds0 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds>; @@ -255,7 +255,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; @@ -413,7 +412,7 @@ >; }; - pinctrl_gpio_keys: gpio_keysgrp { + pinctrl_gpio_keys: gpio-keysgrp { fsl,pins = < /* Power Button */ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 @@ -533,7 +532,6 @@ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071 - MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 >; }; @@ -561,7 +559,7 @@ >; }; - pinctrl_wlan_vmmc: wlan_vmmcgrp { + pinctrl_wlan_vmmc: wlan-vmmcgrp { fsl,pins = < MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0 MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 @@ -580,8 +578,6 @@ status = "okay"; lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; status = "okay"; port@4 { diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index e0280cac2484..6e5cb6a99550 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -76,7 +76,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 24 0>; flash@0 { @@ -427,10 +426,10 @@ }; &usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3 + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_cdwp>; cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; - status = "disabled"; + status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi index 17704a5c1bcb..5cf90c24c707 100644 --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi @@ -89,7 +89,6 @@ }; &ecspi2 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; @@ -97,7 +96,6 @@ }; &ecspi3 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index e000e6f12bf5..a2a714d199ea 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -124,7 +124,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; @@ -283,7 +282,7 @@ VD-supply = <®_audio>; VLS-supply = <®_audio>; VLC-supply = <®_audio>; - }; + }; }; @@ -613,8 +612,6 @@ &weim { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>; - #address-cells = <2>; - #size-cells = <1>; ranges = <0 0 0x08000000 0x08000000>; status = "disabled"; /* pin conflict with SPI NOR */ diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 81dd6cd1937d..84131794e97b 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -153,7 +153,7 @@ mux-ext-port = <4>; }; - backlight_lcd: backlight_lcd { + backlight_lcd: backlight-lcd { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -162,7 +162,7 @@ status = "okay"; }; - backlight_lvds: backlight_lvds { + backlight_lvds: backlight-lvds { compatible = "pwm-backlight"; pwms = <&pwm4 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -197,7 +197,7 @@ }; }; - lcd_panel { + panel-lcd { compatible = "okaya,rs800480t-7x0gp"; backlight = <&backlight_lcd>; @@ -208,7 +208,7 @@ }; }; - panel { + panel-lvds0 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds>; @@ -241,7 +241,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; @@ -378,7 +377,7 @@ >; }; - pinctrl_gpio_keys: gpio_keysgrp { + pinctrl_gpio_keys: gpio-keysgrp { fsl,pins = < /* Power Button */ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 @@ -525,8 +524,6 @@ status = "okay"; lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; status = "okay"; port@4 { diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 8e9e0d98db2f..63bf95ed8c88 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -129,8 +129,8 @@ pinctrl-0 = <&pinctrl_gpio_leds>; red { - gpios = <&gpio1 2 0>; - default-state = "on"; + gpios = <&gpio1 2 0>; + default-state = "on"; }; }; @@ -160,7 +160,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 9 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; diff --git a/arch/arm/boot/dts/imx6qdl-savageboard.dtsi b/arch/arm/boot/dts/imx6qdl-savageboard.dtsi new file mode 100644 index 000000000000..a616e3c400d3 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-savageboard.dtsi @@ -0,0 +1,255 @@ +/* + * Copyright (C) 2017 Milo Kim <woogyom.kim@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = &uart1; + }; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + power { + gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; + label = "Power Button"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + panel { + compatible = "avic,tm097tdh02", "hannstar,hsd100pxn1"; + backlight = <&panel_bl>; + power-supply = <®_3p3v>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + panel_bl: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <4>; + power-supply = <®_3p3v>; + pwms = <&pwm1 0 10000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&fec { + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + reg = <0>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +/* SD card */ +&usdhc3 { + bus-width = <4>; + cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd>; + status = "okay"; +}; + +/* eMMC */ +&usdhc4 { + bus-width = <8>; + keep-power-in-suspend; + no-1-8-v; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emmc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_emmc: emmcgrp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + /* PHY reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_sd: sdgrp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + /* CD pin */ + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-ts4900.dtsi b/arch/arm/boot/dts/imx6qdl-ts4900.dtsi index 5c26b26e851a..267c956d8910 100644 --- a/arch/arm/boot/dts/imx6qdl-ts4900.dtsi +++ b/arch/arm/boot/dts/imx6qdl-ts4900.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -95,7 +95,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; @@ -109,7 +108,6 @@ }; &ecspi2 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index ac9529f85593..1691714f13a2 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -221,7 +221,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <2>; cs-gpios = < &gpio2 30 GPIO_ACTIVE_HIGH &gpio3 19 GPIO_ACTIVE_HIGH @@ -429,8 +428,8 @@ pinctrl_edt_ft5x06: edt-ft5x06grp { fsl,pins = < MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 /* Interrupt */ - MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 /* Reset */ - MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 /* Wake */ + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 /* Reset */ + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 /* Wake */ >; }; @@ -481,21 +480,21 @@ pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1 + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x0b000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi index ef7fa62b9898..a32089132263 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi @@ -28,7 +28,7 @@ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 /* RGMII_nRST */ MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x80000000 /* BT_ON */ MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x80000000 /* BT_WAKE */ - MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x80000000 /* BT_HOST_WAKE */ + MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x80000000 /* BT_HOST_WAKE */ >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index 2b9c2be436f9..82dc5744ae19 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -129,8 +129,8 @@ pinctrl_i2c1: i2c1grp { fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index b13b0b2db881..6d7bf6496117 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -13,9 +13,18 @@ #include <dt-bindings/clock/imx6qdl-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; + aliases { ethernet0 = &fec; can0 = &can1; @@ -204,9 +213,9 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_PCIE_AXI>, <&clks IMX6QDL_CLK_LVDS1_GATE>, <&clks IMX6QDL_CLK_PCIE_REF_125M>; @@ -625,8 +634,8 @@ regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1375000>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; regulator-always-on; anatop-reg-offset = <0x110>; anatop-vol-bit-shift = <8>; @@ -653,15 +662,15 @@ regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; - regulator-min-microvolt = <2000000>; + regulator-min-microvolt = <2250000>; regulator-max-microvolt = <2750000>; regulator-always-on; anatop-reg-offset = <0x130>; anatop-vol-bit-shift = <8>; anatop-vol-bit-width = <5>; anatop-min-bit-val = <0>; - anatop-min-voltage = <2000000>; - anatop-max-voltage = <2750000>; + anatop-min-voltage = <2100000>; + anatop-max-voltage = <2875000>; }; reg_arm: regulator-vddcore { @@ -807,7 +816,7 @@ reg = <0x020e0000 0x4000>; }; - ldb: ldb@020e0008 { + ldb: ldb { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb"; @@ -1092,10 +1101,14 @@ }; weim: weim@021b8000 { + #address-cells = <2>; + #size-cells = <1>; compatible = "fsl,imx6q-weim"; reg = <0x021b8000 0x4000>; interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_EIM_SLOW>; + fsl,weim-cs-gpr = <&gpr>; + status = "disabled"; }; ocotp: ocotp@021bc000 { @@ -1153,8 +1166,10 @@ }; vdoa@021e4000 { + compatible = "fsl,imx6q-vdoa"; reg = <0x021e4000 0x4000>; interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_VDOA>; }; uart2: serial@021e8000 { diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi index 886dbf2eca49..24d071f5d9cd 100644 --- a/arch/arm/boot/dts/imx6qp.dtsi +++ b/arch/arm/boot/dts/imx6qp.dtsi @@ -85,5 +85,28 @@ pcie: pcie@0x01000000 { compatible = "fsl,imx6qp-pcie", "snps,dw-pcie"; }; + + aips-bus@02100000 { + mmdc0: mmdc@021b0000 { /* MMDC0 */ + compatible = "fsl,imx6qp-mmdc", "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + }; + }; }; }; + +&fec { + /delete-property/interrupts-extended; + interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>, + <0 119 IRQ_TYPE_LEVEL_HIGH>; +}; + +&ldb { + clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>, + <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>, + <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>, + <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>; + clock-names = "di0_pll", "di1_pll", + "di0_sel", "di1_sel", "di2_sel", "di3_sel", + "di0", "di1"; +}; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index be118820e9f7..0a90eea17018 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -117,7 +117,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 11 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 02378db3f5fc..cc9572ea2860 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -8,11 +8,21 @@ */ #include <dt-bindings/interrupt-controller/irq.h> -#include "skeleton.dtsi" #include "imx6sl-pinfunc.h" #include <dt-bindings/clock/imx6sl-clock.h> / { + #address-cells = <1>; + #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; + aliases { ethernet0 = &fec; gpio0 = &gpio1; @@ -893,8 +903,12 @@ }; weim: weim@021b8000 { + #address-cells = <2>; + #size-cells = <1>; reg = <0x021b8000 0x4000>; interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; + fsl,weim-cs-gpr = <&gpr>; + status = "disabled"; }; ocotp: ocotp@021bc000 { diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index 9b817f3501a6..802da45aa551 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -142,7 +142,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; diff --git a/arch/arm/boot/dts/imx6sx-sdb-sai.dts b/arch/arm/boot/dts/imx6sx-sdb-sai.dts index 0155450d680e..2ac865b7c364 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-sai.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-sai.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index 9d70cfd40aff..da815527a7f8 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -192,10 +192,10 @@ }; &i2c4 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c4>; - status = "okay"; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; codec: wm8962@1a { compatible = "wlf,wm8962"; @@ -290,6 +290,14 @@ status = "okay"; }; +&usbphy1 { + fsl,tx-d-cal = <106>; +}; + +&usbphy2 { + fsl,tx-d-cal = <106>; +}; + &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts new file mode 100644 index 000000000000..0c1fc1a8f913 --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts @@ -0,0 +1,69 @@ +/* + * Copyright (c) 2016 Andreas Färber + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6sx-udoo-neo.dtsi" + +/ { + model = "UDOO Neo Basic"; + compatible = "udoo,neobasic", "fsl,imx6sx"; + + memory { + reg = <0x80000000 0x20000000>; + }; +}; + +&fec1 { + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts new file mode 100644 index 000000000000..5d6c2274ee2b --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts @@ -0,0 +1,54 @@ +/* + * Copyright (c) 2016 Andreas Färber + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6sx-udoo-neo.dtsi" + +/ { + model = "UDOO Neo Extended"; + compatible = "udoo,neoextended", "fsl,imx6sx"; + + memory { + reg = <0x80000000 0x40000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts new file mode 100644 index 000000000000..653ceb29e28b --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts @@ -0,0 +1,69 @@ +/* + * Copyright (c) 2016 Andreas Färber + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6sx-udoo-neo.dtsi" + +/ { + model = "UDOO Neo Full"; + compatible = "udoo,neofull", "fsl,imx6sx"; + + memory { + reg = <0x80000000 0x40000000>; + }; +}; + +&fec1 { + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi new file mode 100644 index 000000000000..49f466fe0b1d --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi @@ -0,0 +1,430 @@ +/* + * Copyright (c) 2016 Andreas Färber + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx6sx.dtsi" + +/ { + compatible = "fsl,imx6sx"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + red { + label = "udoo-neo:red:mmc"; + gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc0"; + }; + + orange { + label = "udoo-neo:orange:user"; + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; + + reg_sdio_pwr: regulator-sdio-pwr { + compatible = "regulator-fixed"; + gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-name = "SDIO_PWR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_otg1_reg>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_otg2_reg>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wlan: regulator-wlan { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + + reg_bt: regulator-bt { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt_reg>; + enable-active-high; + gpio = <&gpio2 17 GPIO_ACTIVE_HIGH>; + regulator-name = "bt_reg"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; +}; + +&cpu0 { + arm-supply = <&sw1a_reg>; + soc-supply = <&sw1c_reg>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-reset-duration = <10>; + phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <100000>; + status = "okay"; + + pmic: pmic@08 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen2_reg: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&iomuxc { + pinctrl_bt_reg: btreggrp { + fsl,pins = + <MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x15059>; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = + <MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0xa0b1>, + <MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1>, + <MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1>, + <MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1>, + <MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1>, + <MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1>, + + <MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x3081>, + <MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0x3081>, + <MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081>, + <MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081>, + <MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081>, + <MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER 0x3081>, + + <MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91>; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = + <MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1>, + <MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1>; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = + <MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1>, + <MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1>; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = + <MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1>, + <MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1>; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = + <MX6SX_PAD_SD3_DATA4__UART3_RX 0x13059>, + <MX6SX_PAD_SD3_DATA5__UART3_TX 0x13059>, + <MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x13059>, + <MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x13059>; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = + <MX6SX_PAD_SD4_DATA4__UART5_RX 0x1b0b1>, + <MX6SX_PAD_SD4_DATA5__UART5_TX 0x1b0b1>; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = + <MX6SX_PAD_CSI_DATA00__UART6_RI_B 0x1b0b1>, + <MX6SX_PAD_CSI_DATA01__UART6_DSR_B 0x1b0b1>, + <MX6SX_PAD_CSI_DATA02__UART6_DTR_B 0x1b0b1>, + <MX6SX_PAD_CSI_DATA03__UART6_DCD_B 0x1b0b1>, + <MX6SX_PAD_CSI_DATA04__UART6_RX 0x1b0b1>, + <MX6SX_PAD_CSI_DATA05__UART6_TX 0x1b0b1>, + <MX6SX_PAD_CSI_DATA06__UART6_RTS_B 0x1b0b1>, + <MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x1b0b1>; + }; + + pinctrl_otg1_reg: otg1grp { + fsl,pins = + <MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0>; + }; + + + pinctrl_otg2_reg: otg2grp { + fsl,pins = + <MX6SX_PAD_NAND_RE_B__GPIO4_IO_12 0x10b0>; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = + <MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059>, + <MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC 0x10b0>; + }; + + pinctrl_usb_otg2: usbot2ggrp { + fsl,pins = + <MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC 0x10b0>; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = + <MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059>, + <MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059>, + <MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059>, + <MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059>, + <MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059>, + <MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059>, + <MX6SX_PAD_SD1_DATA0__GPIO6_IO_2 0x17059>; /* CD */ + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = + <MX6SX_PAD_KEY_COL2__GPIO2_IO_12 0x15059>, + <MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x13059>, + <MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17069>, + <MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17069>, + <MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17069>, + <MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17069>, + <MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17069>, + <MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10069>, + <MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT 0x10059>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* Cortex-M4 serial */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "disabled"; +}; + +&uart3 { /* Bluetooth */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +/* Arduino serial */ +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "disabled"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + uart-has-rtscts; + status = "disabled"; +}; + +&usbotg1 { /* J2 micro USB port */ + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + status = "okay"; +}; + +&usbotg2 { /* J3 host USB port */ + vbus-supply = <®_usb_otg2_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg2>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + vmmc-supply = <®_sdio_pwr>; + bus-width = <4>; + cd-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; + +&usdhc3 { /* Wi-Fi */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + non-removable; + vmmc-supply = <®_wlan>; + cap-power-off-card; + wakeup-source; + keep-power-in-suspend; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wlcore: wlcore@2 { + compatible = "ti,wl1831"; + reg = <2>; + interrupt-parent = <&gpio2>; + interrupts = <16 IRQ_TYPE_EDGE_RISING>; + ref-clock-frequency = <38400000>; + tcxo-clock-frequency = <26000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 1a473e83efbf..dd4ec85ecbaa 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -11,9 +11,19 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "imx6sx-pinfunc.h" -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; + aliases { can0 = &flexcan1; can1 = &flexcan2; @@ -858,7 +868,7 @@ fsl,num-tx-queues=<3>; fsl,num-rx-queues=<3>; status = "disabled"; - }; + }; mlb: mlb@0218c000 { reg = <0x0218c000 0x4000>; @@ -968,10 +978,14 @@ }; weim: weim@021b8000 { + #address-cells = <2>; + #size-cells = <1>; compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim"; reg = <0x021b8000 0x4000>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_EIM_SLOW>; + fsl,weim-cs-gpr = <&gpr>; + status = "disabled"; }; ocotp: ocotp@021bc000 { @@ -1143,7 +1157,7 @@ lcdif1: lcdif@02220000 { compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; reg = <0x02220000 0x4000>; - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 5 IRQ_TYPE_EDGE_RISING>; clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>, <&clks IMX6SX_CLK_LCDIF_APB>, <&clks IMX6SX_CLK_DISPLAY_AXI>; @@ -1154,7 +1168,7 @@ lcdif2: lcdif@02224000 { compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; reg = <0x02224000 0x4000>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>; clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>, <&clks IMX6SX_CLK_LCDIF_APB>, <&clks IMX6SX_CLK_DISPLAY_AXI>; @@ -1181,7 +1195,7 @@ fsl,adck-max-frequency = <30000000>, <40000000>, <20000000>; status = "disabled"; - }; + }; adc2: adc@02284000 { compatible = "fsl,imx6sx-adc", "fsl,vf610-adc"; @@ -1192,7 +1206,7 @@ fsl,adck-max-frequency = <30000000>, <40000000>, <20000000>; status = "disabled"; - }; + }; wdog3: wdog@02288000 { compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts index e281d5087d4a..00f98e5bfcaf 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts @@ -225,7 +225,7 @@ }; &usbotg1 { - dr_mode = "peripheral"; + dr_mode = "otg"; status = "okay"; }; @@ -235,6 +235,14 @@ status = "okay"; }; +&usbphy1 { + fsl,tx-d-cal = <106>; +}; + +&usbphy2 { + fsl,tx-d-cal = <106>; +}; + &usdhc1 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; diff --git a/arch/arm/boot/dts/imx6ul-geam-kit.dts b/arch/arm/boot/dts/imx6ul-geam-kit.dts index 4c4af76143e3..142e60cab65f 100644 --- a/arch/arm/boot/dts/imx6ul-geam-kit.dts +++ b/arch/arm/boot/dts/imx6ul-geam-kit.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6ul-geam.dtsi b/arch/arm/boot/dts/imx6ul-geam.dtsi index 64eb9ed59b9c..940aef67313b 100644 --- a/arch/arm/boot/dts/imx6ul-geam.dtsi +++ b/arch/arm/boot/dts/imx6ul-geam.dtsi @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts new file mode 100644 index 000000000000..f5b422898e61 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2016 Amarula Solutions B.V. + * Copyright (C) 2016 Engicam S.r.l. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6ul-isiot.dtsi" + +/ { + model = "Engicam Is.IoT MX6UL eMMC Starter kit"; + compatible = "engicam,imx6ul-isiot", "fsl,imx6ul"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; + bus-width = <8>; + no-1-8-v; + status = "okay"; +}; + +&iomuxc { + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17070 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17070 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17070 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17070 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17070 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17070 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17070 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17070 + MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17070 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-isiot-nand.dts b/arch/arm/boot/dts/imx6ul-isiot-nand.dts new file mode 100644 index 000000000000..de15e1c75dd1 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-isiot-nand.dts @@ -0,0 +1,79 @@ +/* + * Copyright (C) 2016 Amarula Solutions B.V. + * Copyright (C) 2016 Engicam S.r.l. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6ul-isiot.dtsi" + +/ { + model = "Engicam Is.IoT MX6UL NAND Starter kit"; + compatible = "engicam,imx6ul-isiot", "fsl,imx6ul"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "okay"; +}; + +&iomuxc { + pinctrl_gpmi_nand: gpmi-nand { + fsl,pins = < + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000 + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1 + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi new file mode 100644 index 000000000000..0b43699af3e3 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi @@ -0,0 +1,114 @@ +/* + * Copyright (C) 2016 Amarula Solutions B.V. + * Copyright (C) 2016 Engicam S.r.l. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "imx6ul.dtsi" + +/ { + memory { + reg = <0x80000000 0x20000000>; + }; + + chosen { + stdout-path = &uart1; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + bus-width = <4>; + no-1-8-v; + status = "okay"; +}; + +&iomuxc { + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-liteboard.dts b/arch/arm/boot/dts/imx6ul-liteboard.dts new file mode 100644 index 000000000000..ed1d891d6a89 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-liteboard.dts @@ -0,0 +1,147 @@ +/* + * Copyright 2016 Grinn + * + * Author: Marcin Niestroj <m.niestroj@grinn-global.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6ul-litesom.dtsi" + +/ { + model = "Grinn i.MX6UL liteBoard"; + compatible = "grinn,imx6ul-liteboard", "grinn,imx6ul-litesom", + "fsl,imx6ul"; + + chosen { + stdout-path = &uart1; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_vbus>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio2 8 GPIO_ACTIVE_LOW>; + }; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10071 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + >; + }; + + pinctrl_usb_otg1_vbus: usb-otg1-vbus { + fsl,pins = < + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x79 + >; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ul-litesom.dtsi b/arch/arm/boot/dts/imx6ul-litesom.dtsi new file mode 100644 index 000000000000..039721d3dcb4 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-litesom.dtsi @@ -0,0 +1,82 @@ +/* + * Copyright 2016 Grinn + * + * Author: Marcin Niestroj <m.niestroj@grinn-global.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx6ul.dtsi" + +/ { + model = "Grinn i.MX6UL liteSOM"; + compatible = "grinn,imx6ul-litesom", "fsl,imx6ul"; + + memory { + reg = <0x80000000 0x20000000>; + }; +}; + +&iomuxc { + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059 + MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17059 + >; + }; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + no-1-8-v; + non-removable; + keep-power-in-suspend; + wakeup-source; + bus-width = <8>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi new file mode 100644 index 000000000000..51095df33a90 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi @@ -0,0 +1,192 @@ +/* + * Copyright 2017 Armadeus Systems <support@armadeus.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx6ul.dtsi" + +/ { + memory { + reg = <0x80000000 0>; /* will be filled by U-Boot */ + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + usdhc3_pwrseq: usdhc3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-reset-duration = <1>; + phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + phy-handle = <ðphy1>; + phy-supply = <®_3v3>; + status = "okay"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + interrupt-parent = <&gpio4>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; + }; + }; +}; + +/* Bluetooth */ +&uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart8>; + uart-has-rtscts; + status = "okay"; +}; + +/* eMMC */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + no-1-8-v; + non-removable; + status = "okay"; +}; + +/* WiFi */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + no-1-8-v; + non-removable; + mmc-pwrseq = <&usdhc3_pwrseq>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + brcmf: bcrmf@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio2>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + }; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x130b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x130b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x130b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x130b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + /* INT# */ + MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0 + /* RST# */ + MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x130b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + >; + }; + + pinctrl_uart8: uart8grp { + fsl,pins = < + MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x1b0b0 + /* BT_REG_ON */ + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x130b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059 + MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059 + MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059 + MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x1b0b0 + MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x100b0 + MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x1b0b0 + MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x1b0b0 + MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x1b0b0 + MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x1b0b0 + /* WL_REG_ON */ + MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x130b0 + /* WL_IRQ */ + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-opos6uldev.dts b/arch/arm/boot/dts/imx6ul-opos6uldev.dts new file mode 100644 index 000000000000..0e59ee57fd55 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-opos6uldev.dts @@ -0,0 +1,412 @@ +/* + * Copyright 2017 Armadeus Systems <support@armadeus.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6ul-opos6ul.dtsi" + +/ { + model = "Armadeus Systems OPOS6UL SoM on OPOS6ULDev board"; + compatible = "armadeus,opos6uldev", "armadeus,opos6ul", "fsl,imx6ul"; + + chosen { + stdout-path = &uart1; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 191000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_5v>; + status = "okay"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + user-button { + label = "User button"; + gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + linux,code = <BTN_MISC>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + user-led { + label = "User"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + onewire { + compatible = "w1-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_w1>; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbotg1_vbus: regulator-usbotg1vbus { + compatible = "regulator-fixed"; + regulator-name = "usbotg1vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_vbus>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usbotg2_vbus: regulator-usbotg2vbus { + compatible = "regulator-fixed"; + regulator-name = "usbotg2vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2_vbus>; + gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&adc1 { + vref-supply = <®_3v3>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_5v>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_5v>; + status = "okay"; +}; + +&ecspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>; + status = "okay"; + + spidev0: spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <5000000>; + }; + + spidev1: spi@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <5000000>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock_frequency = <400000>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock_frequency = <400000>; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif>; + display = <&display0>; + lcd-supply = <®_3v3>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <18>; + + display-timings { + timing0: timing0 { + clock-frequency = <33000033>; + hactive = <800>; + vactive = <480>; + hback-porch = <96>; + hfront-porch = <96>; + vback-porch = <20>; + vfront-porch = <21>; + hsync-len = <64>; + vsync-len = <4>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "disabled"; +}; + +&tsc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc>; + xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + measure-delay-time = <0xffff>; + pre-charge-time = <0xffff>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_id>; + vbus-supply = <®_usbotg1_vbus>; + dr_mode = "otg"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usbotg2_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpios>; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x1b0b0 + MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x1b0b0 + MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x1b0b0 + MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x1b0b0 + MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b0b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0 + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0 + >; + }; + + pinctrl_gpios: gpiosgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0b0b0 + MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x0b0b0 + MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x0b0b0 + MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0b0b0 + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x0b0b0 + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0b0b0 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0b0b0 + MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x0b0b0 + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0b0b0 + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0 + MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0 + MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0 + MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0b0 + MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0b0b0 + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0b0b0 + MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x0b0b0 + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 + >; + }; + + pinctrl_lcdif: lcdifgrp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x100b1 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x100b1 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x100b1 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x100b1 + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x100b1 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x100b1 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x100b1 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x100b1 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x100b1 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x100b1 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x100b1 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x100b1 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x100b1 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x100b1 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x100b1 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x100b1 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x100b1 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x100b1 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x100b1 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x100b1 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x100b1 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x100b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6UL_PAD_NAND_ALE__PWM3_OUT 0x1b0b0 + >; + }; + + pinctrl_tsc: tscgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usbotg1_id: usbotg1idgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x1b0b0 + >; + }; + + pinctrl_usbotg1_vbus: usbotg1vbusgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1b0b0 + >; + }; + + pinctrl_usbotg2_vbus: usbotg2vbusgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 + >; + }; + + pinctrl_w1: w1grp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x0b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts index 827d9e8fc74e..7d7254b12a75 100644 --- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts +++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts @@ -14,17 +14,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi index 530e9ca13a74..c784a0b75ca0 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi @@ -285,7 +285,6 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; - fsl,spi-num-chipselects = <2>; cs-gpios = < &gpio1 29 GPIO_ACTIVE_HIGH &gpio1 10 GPIO_ACTIVE_HIGH diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index c5c05fdccc78..b9d7d2d09402 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -11,9 +11,19 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "imx6ul-pinfunc.h" -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; + aliases { ethernet0 = &fec1; ethernet1 = &fec2; @@ -89,11 +99,11 @@ }; intc: interrupt-controller@00a01000 { - compatible = "arm,cortex-a7-gic"; + compatible = "arm,gic-400", "arm,cortex-a7-gic"; #interrupt-cells = <3>; interrupt-controller; reg = <0x00a01000 0x1000>, - <0x00a02000 0x1000>, + <0x00a02000 0x2000>, <0x00a04000 0x2000>, <0x00a06000 0x2000>; }; @@ -532,7 +542,6 @@ anatop-min-bit-val = <0>; anatop-min-voltage = <2625000>; anatop-max-voltage = <3400000>; - anatop-enable-bit = <0>; }; reg_arm: regulator-vddcore { @@ -849,6 +858,12 @@ reg = <0x021b0000 0x4000>; }; + ocotp: ocotp-ctrl@021bc000 { + compatible = "fsl,imx6ul-ocotp", "syscon"; + reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6UL_CLK_OCOTP>; + }; + lcdif: lcdif@021c8000 { compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif"; reg = <0x021c8000 0x4000>; diff --git a/arch/arm/boot/dts/imx6ull-14x14-evk.dts b/arch/arm/boot/dts/imx6ull-14x14-evk.dts new file mode 100644 index 000000000000..4741871434dd --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-14x14-evk.dts @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx6ul-14x14-evk.dts" + +/ { + model = "Freescale i.MX6 UlltraLite 14x14 EVK Board"; + compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull"; +}; + +&clks { + assigned-clocks = <&clks IMX6UL_CLK_PLL3_PFD2>; + assigned-clock-rates = <320000000>; +}; diff --git a/arch/arm/boot/dts/imx6ull-pinfunc.h b/arch/arm/boot/dts/imx6ull-pinfunc.h new file mode 100644 index 000000000000..118202336691 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-pinfunc.h @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __DTS_IMX6ULL_PINFUNC_H +#define __DTS_IMX6ULL_PINFUNC_H + +#include "imx6ul-pinfunc.h" +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX6ULL_PAD_ENET2_RX_DATA0__EPDC_SDDO08 0x00E4 0x0370 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET2_RX_DATA1__EPDC_SDDO09 0x00E8 0x0374 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET2_RX_EN__EPDC_SDDO10 0x00EC 0x0378 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET2_TX_DATA0__EPDC_SDDO11 0x00F0 0x037C 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET2_TX_DATA1__EPDC_SDDO12 0x00F4 0x0380 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET2_TX_EN__EPDC_SDDO13 0x00F8 0x0384 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET2_TX_CLK__EPDC_SDDO14 0x00FC 0x0388 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET2_RX_ER__EPDC_SDDO15 0x0100 0x038C 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_CLK__EPDC_SDCLK 0x0104 0x0390 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_ENABLE__EPDC_SDLE 0x0108 0x0394 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_HSYNC__EPDC_SDOE 0x010C 0x0398 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_VSYNC__EPDC_SDCE0 0x0110 0x039C 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_RESET__EPDC_GDOE 0x0114 0x03A0 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA00__EPDC_SDDO00 0x0118 0x03A4 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA01__EPDC_SDDO01 0x011C 0x03A8 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA02__EPDC_SDDO02 0x0120 0x03AC 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA03__EPDC_SDDO03 0x0124 0x03B0 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA04__EPDC_SDDO04 0x0128 0x03B4 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA05__EPDC_SDDO05 0x012C 0x03B8 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA06__EPDC_SDDO06 0x0130 0x03BC 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA07__EPDC_SDDO07 0x0134 0x03C0 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA14__EPDC_SDSHR 0x0150 0x03DC 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA15__EPDC_GDRL 0x0154 0x03E0 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA16__EPDC_GDCLK 0x0158 0x03E4 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA17__EPDC_GDSP 0x015C 0x03E8 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA21__EPDC_SDCE1 0x016C 0x03F8 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_MCLK__ESAI_TX3_RX2 0x01D4 0x0460 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_PIXCLK__ESAI_TX2_RX3 0x01D8 0x0464 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_VSYNC__ESAI_TX4_RX1 0x01DC 0x0468 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_HSYNC__ESAI_TX1 0x01E0 0x046C 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA00__ESAI_TX_HF_CLK 0x01E4 0x0470 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA01__ESAI_RX_HF_CLK 0x01E8 0x0474 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA02__ESAI_RX_FS 0x01EC 0x0478 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA03__ESAI_RX_CLK 0x01F0 0x047C 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4 0x0480 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0 0x01FC 0x0488 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA07__ESAI_T0 0x0200 0x048C 0x0000 0x9 0x0 + +#endif /* __DTS_IMX6ULL_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi new file mode 100644 index 000000000000..0c182917b863 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull.dtsi @@ -0,0 +1,43 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx6ul.dtsi" +#include "imx6ull-pinfunc.h" diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index a9cc65725f19..a171545478be 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -596,29 +596,29 @@ pinctrl_gpio_lpsr: gpio1-grp { fsl,pins = < - MX7D_PAD_GPIO1_IO01__GPIO1_IO1 0x59 - MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x59 - MX7D_PAD_GPIO1_IO03__GPIO1_IO3 0x59 + MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x59 + MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x59 + MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x59 >; }; pinctrl_i2c1: i2c1-grp { fsl,pins = < - MX7D_PAD_GPIO1_IO05__I2C1_SDA 0x4000007f - MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x4000007f + MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA 0x4000007f + MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL 0x4000007f >; }; pinctrl_cd_usdhc1: usdhc1-cd-grp { fsl,pins = < - MX7D_PAD_GPIO1_IO00__GPIO1_IO0 0x59 /* CD */ + MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x59 /* CD */ >; }; pinctrl_uart1_ctrl2: uart1-ctrl2-grp { fsl,pins = < - MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x14 /* DSR */ - MX7D_PAD_GPIO1_IO06__GPIO1_IO6 0x14 /* RI */ + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14 /* DSR */ + MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x14 /* RI */ >; }; }; diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts index 58b09bf1ba2d..ae45af1ad062 100644 --- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts @@ -261,12 +261,6 @@ >; }; - pinctrl_usbotg1: usbotg1grp { - fsl,pins = < - MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14 /* OTG PWREN */ - >; - }; - pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x59 @@ -283,3 +277,11 @@ >; }; }; + +&iomuxc_lpsr { + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x14 /* OTG PWREN */ + >; + }; +};
\ No newline at end of file diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index ce08f180f213..5d98e2b5d54b 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -712,33 +712,33 @@ pinctrl_hog_2: hoggrp-2 { fsl,pins = < - MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x7d - MX7D_PAD_GPIO1_IO03__CCM_CLKO2 0x7d + MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x7d + MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2 0x7d >; }; pinctrl_backlight_j9: backlightj9grp { fsl,pins = < - MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x7d + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x7d >; }; pinctrl_pwm1: pwm1grp { fsl,pins = < - MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x7d + MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x7d >; }; pinctrl_usbotg1: usbotg1grp { fsl,pins = < - MX7D_PAD_GPIO1_IO04__USB_OTG1_OC 0x7d - MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14 + MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x7d + MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x14 >; }; pinctrl_wdog1: wdog1grp { fsl,pins = < - MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x75 + MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x75 >; }; }; diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h index 3f9f0d9c8094..f6f7e78f8820 100644 --- a/arch/arm/boot/dts/imx7d-pinfunc.h +++ b/arch/arm/boot/dts/imx7d-pinfunc.h @@ -15,57 +15,61 @@ * <mux_reg conf_reg input_reg mux_mode input_val> */ -#define MX7D_PAD_GPIO1_IO00__GPIO1_IO0 0x0000 0x0030 0x0000 0x0 0x0 -#define MX7D_PAD_GPIO1_IO00__PWM4_OUT 0x0000 0x0030 0x0000 0x1 0x0 -#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_ANY 0x0000 0x0030 0x0000 0x2 0x0 -#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x0000 0x0030 0x0000 0x3 0x0 -#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG__RST_B_DEB 0x0000 0x0030 0x0000 0x4 0x0 -#define MX7D_PAD_GPIO1_IO01__GPIO1_IO1 0x0004 0x0034 0x0000 0x0 0x0 -#define MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x0004 0x0034 0x0000 0x1 0x0 -#define MX7D_PAD_GPIO1_IO01__CCM_ENET_REF_CLK3 0x0004 0x0034 0x0000 0x2 0x0 -#define MX7D_PAD_GPIO1_IO01__SAI1_MCLK 0x0004 0x0034 0x0000 0x3 0x0 -#define MX7D_PAD_GPIO1_IO01__ANATOP_24M_OUT 0x0004 0x0034 0x0000 0x4 0x0 -#define MX7D_PAD_GPIO1_IO01__OBSERVE0_OUT 0x0004 0x0034 0x0000 0x6 0x0 -#define MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x0008 0x0038 0x0000 0x0 0x0 -#define MX7D_PAD_GPIO1_IO02__PWM2_OUT 0x0008 0x0038 0x0000 0x1 0x0 -#define MX7D_PAD_GPIO1_IO02__CCM_ENET_REF_CLK1 0x0008 0x0038 0x0564 0x2 0x3 -#define MX7D_PAD_GPIO1_IO02__SAI2_MCLK 0x0008 0x0038 0x0000 0x3 0x0 -#define MX7D_PAD_GPIO1_IO02__CCM_CLKO1 0x0008 0x0038 0x0000 0x5 0x0 -#define MX7D_PAD_GPIO1_IO02__OBSERVE1_OUT 0x0008 0x0038 0x0000 0x6 0x0 -#define MX7D_PAD_GPIO1_IO02__USB_OTG1_ID 0x0008 0x0038 0x0734 0x7 0x3 -#define MX7D_PAD_GPIO1_IO03__GPIO1_IO3 0x000C 0x003C 0x0000 0x0 0x0 -#define MX7D_PAD_GPIO1_IO03__PWM3_OUT 0x000C 0x003C 0x0000 0x1 0x0 -#define MX7D_PAD_GPIO1_IO03__CCM_ENET_REF_CLK2 0x000C 0x003C 0x0570 0x2 0x3 -#define MX7D_PAD_GPIO1_IO03__SAI3_MCLK 0x000C 0x003C 0x0000 0x3 0x0 -#define MX7D_PAD_GPIO1_IO03__CCM_CLKO2 0x000C 0x003C 0x0000 0x5 0x0 -#define MX7D_PAD_GPIO1_IO03__OBSERVE2_OUT 0x000C 0x003C 0x0000 0x6 0x0 -#define MX7D_PAD_GPIO1_IO03__USB_OTG2_ID 0x000C 0x003C 0x0730 0x7 0x3 -#define MX7D_PAD_GPIO1_IO04__GPIO1_IO4 0x0010 0x0040 0x0000 0x0 0x0 -#define MX7D_PAD_GPIO1_IO04__USB_OTG1_OC 0x0010 0x0040 0x072C 0x1 0x1 -#define MX7D_PAD_GPIO1_IO04__FLEXTIMER1_CH4 0x0010 0x0040 0x0594 0x2 0x1 -#define MX7D_PAD_GPIO1_IO04__UART5_CTS_B 0x0010 0x0040 0x0710 0x3 0x4 -#define MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x0010 0x0040 0x05D4 0x4 0x2 -#define MX7D_PAD_GPIO1_IO04__OBSERVE3_OUT 0x0010 0x0040 0x0000 0x6 0x0 -#define MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x0014 0x0044 0x0000 0x0 0x0 -#define MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR 0x0014 0x0044 0x0000 0x1 0x0 -#define MX7D_PAD_GPIO1_IO05__FLEXTIMER1_CH5 0x0014 0x0044 0x0598 0x2 0x1 -#define MX7D_PAD_GPIO1_IO05__UART5_RTS_B 0x0014 0x0044 0x0710 0x3 0x5 -#define MX7D_PAD_GPIO1_IO05__I2C1_SDA 0x0014 0x0044 0x05D8 0x4 0x2 -#define MX7D_PAD_GPIO1_IO05__OBSERVE4_OUT 0x0014 0x0044 0x0000 0x6 0x0 -#define MX7D_PAD_GPIO1_IO06__GPIO1_IO6 0x0018 0x0048 0x0000 0x0 0x0 -#define MX7D_PAD_GPIO1_IO06__USB_OTG2_OC 0x0018 0x0048 0x0728 0x1 0x1 -#define MX7D_PAD_GPIO1_IO06__FLEXTIMER1_CH6 0x0018 0x0048 0x059C 0x2 0x1 -#define MX7D_PAD_GPIO1_IO06__UART5_RX_DATA 0x0018 0x0048 0x0714 0x3 0x4 -#define MX7D_PAD_GPIO1_IO06__I2C2_SCL 0x0018 0x0048 0x05DC 0x4 0x2 -#define MX7D_PAD_GPIO1_IO06__CCM_WAIT 0x0018 0x0048 0x0000 0x5 0x0 -#define MX7D_PAD_GPIO1_IO06__KPP_ROW4 0x0018 0x0048 0x0624 0x6 0x1 -#define MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x001C 0x004C 0x0000 0x0 0x0 -#define MX7D_PAD_GPIO1_IO07__USB_OTG2_PWR 0x001C 0x004C 0x0000 0x1 0x0 -#define MX7D_PAD_GPIO1_IO07__FLEXTIMER1_CH7 0x001C 0x004C 0x05A0 0x2 0x1 -#define MX7D_PAD_GPIO1_IO07__UART5_TX_DATA 0x001C 0x004C 0x0714 0x3 0x5 -#define MX7D_PAD_GPIO1_IO07__I2C2_SDA 0x001C 0x004C 0x05E0 0x4 0x2 -#define MX7D_PAD_GPIO1_IO07__CCM_STOP 0x001C 0x004C 0x0000 0x5 0x0 -#define MX7D_PAD_GPIO1_IO07__KPP_COL4 0x001C 0x004C 0x0604 0x6 0x1 +#define MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x0000 0x0030 0x0000 0x0 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO00__PWM4_OUT 0x0000 0x0030 0x0000 0x1 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_ANY 0x0000 0x0030 0x0000 0x2 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x0000 0x0030 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG__RST_B_DEB 0x0000 0x0030 0x0000 0x4 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x0004 0x0034 0x0000 0x0 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x0004 0x0034 0x0000 0x1 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO01__CCM_ENET_REF_CLK3 0x0004 0x0034 0x0000 0x2 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO01__SAI1_MCLK 0x0004 0x0034 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO01__ANATOP_24M_OUT 0x0004 0x0034 0x0000 0x4 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO01__OBSERVE0_OUT 0x0004 0x0034 0x0000 0x6 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x0008 0x0038 0x0000 0x0 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO02__PWM2_OUT 0x0008 0x0038 0x0000 0x1 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO02__CCM_ENET_REF_CLK1 0x0008 0x0038 0x0564 0x2 0x3 +#define MX7D_PAD_LPSR_GPIO1_IO02__SAI2_MCLK 0x0008 0x0038 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO02__CCM_CLKO1 0x0008 0x0038 0x0000 0x5 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO02__OBSERVE1_OUT 0x0008 0x0038 0x0000 0x6 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO02__USB_OTG1_ID 0x0008 0x0038 0x0734 0x7 0x3 +#define MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x000C 0x003C 0x0000 0x0 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO03__PWM3_OUT 0x000C 0x003C 0x0000 0x1 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO03__CCM_ENET_REF_CLK2 0x000C 0x003C 0x0570 0x2 0x3 +#define MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK 0x000C 0x003C 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2 0x000C 0x003C 0x0000 0x5 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO03__OBSERVE2_OUT 0x000C 0x003C 0x0000 0x6 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO03__USB_OTG2_ID 0x000C 0x003C 0x0730 0x7 0x3 +#define MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x0010 0x0040 0x0000 0x0 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x0010 0x0040 0x072C 0x1 0x1 +#define MX7D_PAD_LPSR_GPIO1_IO04__FLEXTIMER1_CH4 0x0010 0x0040 0x0594 0x2 0x1 +#define MX7D_PAD_LPSR_GPIO1_IO04__UART5_DCE_CTS 0x0010 0x0040 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO04__UART5_DTE_RTS 0x0010 0x0040 0x0710 0x3 0x4 +#define MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL 0x0010 0x0040 0x05D4 0x4 0x2 +#define MX7D_PAD_LPSR_GPIO1_IO04__OBSERVE3_OUT 0x0010 0x0040 0x0000 0x6 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x0014 0x0044 0x0000 0x0 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO05__USB_OTG1_PWR 0x0014 0x0044 0x0000 0x1 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO05__FLEXTIMER1_CH5 0x0014 0x0044 0x0598 0x2 0x1 +#define MX7D_PAD_LPSR_GPIO1_IO05__UART5_DCE_RTS 0x0014 0x0044 0x0710 0x3 0x5 +#define MX7D_PAD_LPSR_GPIO1_IO05__UART5_DTE_CTS 0x0014 0x0044 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA 0x0014 0x0044 0x05D8 0x4 0x2 +#define MX7D_PAD_LPSR_GPIO1_IO05__OBSERVE4_OUT 0x0014 0x0044 0x0000 0x6 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x0018 0x0048 0x0000 0x0 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC 0x0018 0x0048 0x0728 0x1 0x1 +#define MX7D_PAD_LPSR_GPIO1_IO06__FLEXTIMER1_CH6 0x0018 0x0048 0x059C 0x2 0x1 +#define MX7D_PAD_LPSR_GPIO1_IO06__UART5_DCE_RX 0x0018 0x0048 0x0714 0x3 0x4 +#define MX7D_PAD_LPSR_GPIO1_IO06__UART5_DTE_TX 0x0018 0x0048 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO06__I2C2_SCL 0x0018 0x0048 0x05DC 0x4 0x2 +#define MX7D_PAD_LPSR_GPIO1_IO06__CCM_WAIT 0x0018 0x0048 0x0000 0x5 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO06__KPP_ROW4 0x0018 0x0048 0x0624 0x6 0x1 +#define MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x001C 0x004C 0x0000 0x0 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO07__USB_OTG2_PWR 0x001C 0x004C 0x0000 0x1 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO07__FLEXTIMER1_CH7 0x001C 0x004C 0x05A0 0x2 0x1 +#define MX7D_PAD_LPSR_GPIO1_IO07__UART5_DCE_TX 0x001C 0x004C 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO07__UART5_DTE_RX 0x001C 0x004C 0x0714 0x3 0x5 +#define MX7D_PAD_LPSR_GPIO1_IO07__I2C2_SDA 0x001C 0x004C 0x05E0 0x4 0x2 +#define MX7D_PAD_LPSR_GPIO1_IO07__CCM_STOP 0x001C 0x004C 0x0000 0x5 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO07__KPP_COL4 0x001C 0x004C 0x0604 0x6 0x1 #define MX7D_PAD_GPIO1_IO08__GPIO1_IO8 0x0014 0x026C 0x0000 0x0 0x0 #define MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x0014 0x026C 0x0000 0x1 0x0 #define MX7D_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0014 0x026C 0x0000 0x2 0x0 diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 2f33c463cbce..5be01a1bf840 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -111,7 +111,6 @@ }; &ecspi3 { - fsl,spi-num-chipselects = <1>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; @@ -502,12 +501,6 @@ >; }; - pinctrl_pwm1: pwm1grp { - fsl,pins = < - MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x110b0 - >; - }; - pinctrl_tsc2046_pendown: tsc2046_pendown { fsl,pins = < MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x59 @@ -635,11 +628,19 @@ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b >; }; + }; +}; - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x74 - >; - }; +&iomuxc_lpsr { + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x74 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x110b0 + >; }; }; diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts index 0345267f3390..d5237fd0fa65 100644 --- a/arch/arm/boot/dts/imx7s-warp.dts +++ b/arch/arm/boot/dts/imx7s-warp.dts @@ -437,10 +437,12 @@ MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x1b >; }; +}; +&iomuxc_lpsr { pinctrl_wdog: wdoggrp { fsl,pins = < - MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x74 + MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x74 >; }; }; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 2b6cb05bc01a..5d3a43b8de20 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -46,9 +46,19 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "imx7d-pinfunc.h" -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + * Also for U-Boot there must be a pre-existing /memory node. + */ + chosen {}; + memory { device_type = "memory"; reg = <0 0>; }; + aliases { gpio0 = &gpio1; gpio1 = &gpio2; @@ -507,7 +517,6 @@ anatop-min-bit-val = <8>; anatop-min-voltage = <800000>; anatop-max-voltage = <1200000>; - anatop-enable-bit = <31>; }; }; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index 6f16d09dc5a4..e8b249f92fb3 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -10,6 +10,41 @@ compatible = "arm,integrator-ap"; dma-ranges = <0x80000000 0x0 0x80000000>; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + /* + * Since the board has pluggable CPU modules, we + * cannot define a proper compatible here. Let the + * boot loader fill in the apropriate compatible + * string if necessary. + */ + /* compatible = "arm,arm926ej-s"; */ + reg = <0>; + /* + * The documentation in ARM DUI 0138E page 3-12 states + * that the maximum frequency for this clock is 200 MHz + * but painful trial-and-error has proved to me that it + * is actually just hanging the system above 71 MHz. + * Sad but true. + */ + /* kHz uV */ + operating-points = <71000 0 + 66000 0 + 60000 0 + 48000 0 + 36000 0 + 24000 0 + 12000 0>; + clocks = <&cmosc>; + clock-names = "cpu"; + clock-latency = <1000000>; /* 1 ms */ + }; + }; + aliases { arm,timer-primary = &timer2; arm,timer-secondary = &timer1; diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts index 1b5e4b006b72..97f38b57a702 100644 --- a/arch/arm/boot/dts/integratorcp.dts +++ b/arch/arm/boot/dts/integratorcp.dts @@ -13,6 +13,32 @@ bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk"; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + /* + * Since the board has pluggable CPU modules, we + * cannot define a proper compatible here. Let the + * boot loader fill in the apropriate compatible + * string if necessary. + */ + /* compatible = "arm,arm920t"; */ + reg = <0>; + /* + * TBD comment. + */ + /* kHz uV */ + operating-points = <50000 0 + 48000 0>; + clocks = <&cmcore>; + clock-names = "cpu"; + clock-latency = <1000000>; /* 1 ms */ + }; + }; + /* * The Integrator/CP overall clocking architecture can be found in * ARM DUI 0184B page 7-28 "Integrator/CP922T system clocks" which diff --git a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi index ac990f679725..ba828cb59587 100644 --- a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi @@ -138,7 +138,8 @@ netcp: netcp@24000000 { /* NetCP address range */ ranges = <0 0x24000000 0x1000000>; - clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>; + clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>; + clock-names = "pa_clk", "ethss_clk", "cpts"; dma-coherent; ti,navigator-dmas = <&dma_gbe 0>, diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi index 497c417db5b6..0dd4cdd6d40c 100644 --- a/arch/arm/boot/dts/keystone-k2e.dtsi +++ b/arch/arm/boot/dts/keystone-k2e.dtsi @@ -8,6 +8,8 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/reset/ti-syscon.h> + / { compatible = "ti,k2e", "ti,keystone"; model = "Texas Instruments Keystone 2 Edison SoC"; @@ -82,6 +84,29 @@ }; }; + msm_ram: msmram@0c000000 { + compatible = "mmio-sram"; + reg = <0x0c000000 0x200000>; + ranges = <0x0 0x0c000000 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + + sram-bm@1f0000 { + reg = <0x001f0000 0x8000>; + }; + }; + + psc: power-sleep-controller@02350000 { + pscrst: reset-controller { + compatible = "ti,k2e-pscrst", "ti,syscon-reset"; + #reset-cells = <1>; + + ti,reset-bits = < + 0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */ + >; + }; + }; + dspgpio0: keystone_dsp_gpio@02620240 { compatible = "ti,keystone-dsp-gpio"; gpio-controller; diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi index 2919c5190653..f59567fe7d91 100644 --- a/arch/arm/boot/dts/keystone-k2g.dtsi +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -40,12 +40,12 @@ }; gic: interrupt-controller@02561000 { - compatible = "arm,cortex-a15-gic"; + compatible = "arm,gic-400", "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; reg = <0x0 0x02561000 0x0 0x1000>, <0x0 0x02562000 0x0 0x2000>, - <0x0 0x02564000 0x0 0x1000>, + <0x0 0x02564000 0x0 0x2000>, <0x0 0x02566000 0x0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; @@ -72,10 +72,23 @@ soc { #address-cells = <1>; #size-cells = <1>; + #pinctrl-cells = <1>; compatible = "ti,keystone","simple-bus"; ranges = <0x0 0x0 0x0 0xc0000000>; dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>; + msm_ram: msmram@0c000000 { + compatible = "mmio-sram"; + reg = <0x0c000000 0x100000>; + ranges = <0x0 0x0c000000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + + sram-bm@f7000 { + reg = <0x000f7000 0x8000>; + }; + }; + k2g_pinctrl: pinmux@02621000 { compatible = "pinctrl-single"; reg = <0x02621000 0x410>; @@ -89,7 +102,7 @@ }; uart0: serial@02530c00 { - compatible = "ns16550a"; + compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; reg-io-width = <4>; diff --git a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi index f86d6ddb832b..a5ac845464bf 100644 --- a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi @@ -155,7 +155,8 @@ netcp: netcp@2000000 { /* NetCP address range */ ranges = <0 0x2000000 0x100000>; - clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>; + clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>; + clock-names = "pa_clk", "ethss_clk", "cpts"; dma-coherent; ti,navigator-dmas = <&dma_gbe 22>, diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi index 8f67fa8df936..69d449430511 100644 --- a/arch/arm/boot/dts/keystone-k2hk.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk.dtsi @@ -8,6 +8,8 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/reset/ti-syscon.h> + / { compatible = "ti,k2hk", "ti,keystone"; model = "Texas Instruments Keystone 2 Kepler/Hawking SoC"; @@ -46,6 +48,36 @@ soc { /include/ "keystone-k2hk-clocks.dtsi" + msm_ram: msmram@0c000000 { + compatible = "mmio-sram"; + reg = <0x0c000000 0x600000>; + ranges = <0x0 0x0c000000 0x600000>; + #address-cells = <1>; + #size-cells = <1>; + + sram-bm@5f0000 { + reg = <0x5f0000 0x8000>; + }; + }; + + psc: power-sleep-controller@02350000 { + pscrst: reset-controller { + compatible = "ti,k2hk-pscrst", "ti,syscon-reset"; + #reset-cells = <1>; + + ti,reset-bits = < + 0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */ + 0xa40 8 0xa40 8 0x840 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 1: dsp1 */ + 0xa44 8 0xa44 8 0x844 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 2: dsp2 */ + 0xa48 8 0xa48 8 0x848 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 3: dsp3 */ + 0xa4c 8 0xa4c 8 0x84c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 4: dsp4 */ + 0xa50 8 0xa50 8 0x850 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 5: dsp5 */ + 0xa54 8 0xa54 8 0x854 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 6: dsp6 */ + 0xa58 8 0xa58 8 0x858 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 7: dsp7 */ + >; + }; + }; + dspgpio0: keystone_dsp_gpio@02620240 { compatible = "ti,keystone-dsp-gpio"; gpio-controller; diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi index 5acbd0dcc2ab..b6f26824e83a 100644 --- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi @@ -137,7 +137,8 @@ netcp: netcp@26000000 { /* NetCP address range */ ranges = <0 0x26000000 0x1000000>; - clocks = <&clkosr>, <&papllclk>, <&clkcpgmac>, <&chipclk12>; + clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>, <&clkosr>; + clock-names = "pa_clk", "ethss_clk", "cpts", "osr_clk"; dma-coherent; ti,navigator-dmas = <&dma_gbe 0>, diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi index 2ee3d0ac2816..b58e7ebc0919 100644 --- a/arch/arm/boot/dts/keystone-k2l.dtsi +++ b/arch/arm/boot/dts/keystone-k2l.dtsi @@ -8,6 +8,8 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/reset/ti-syscon.h> + / { compatible = "ti,k2l", "ti,keystone"; model = "Texas Instruments Keystone 2 Lamarr SoC"; @@ -35,7 +37,7 @@ /include/ "keystone-k2l-clocks.dtsi" uart2: serial@02348400 { - compatible = "ns16550a"; + compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; reg-io-width = <4>; @@ -45,7 +47,7 @@ }; uart3: serial@02348800 { - compatible = "ns16550a"; + compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; reg-io-width = <4>; @@ -59,6 +61,7 @@ reg = <0x02620690 0xc>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <2>; pinctrl-single,bit-per-mux; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x1>; @@ -203,6 +206,32 @@ }; }; + msm_ram: msmram@0c000000 { + compatible = "mmio-sram"; + reg = <0x0c000000 0x200000>; + ranges = <0x0 0x0c000000 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + + sram-bm@1f8000 { + reg = <0x001f8000 0x8000>; + }; + }; + + psc: power-sleep-controller@02350000 { + pscrst: reset-controller { + compatible = "ti,k2l-pscrst", "ti,syscon-reset"; + #reset-cells = <1>; + + ti,reset-bits = < + 0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */ + 0xa40 8 0xa40 8 0x840 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 1: dsp1 */ + 0xa44 8 0xa44 8 0x844 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 2: dsp2 */ + 0xa48 8 0xa48 8 0x848 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 3: dsp3 */ + >; + }; + }; + dspgpio0: keystone_dsp_gpio@02620240 { compatible = "ti,keystone-dsp-gpio"; gpio-controller; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index 02708ba2d4f4..8dd74f48a6d3 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -30,12 +30,12 @@ }; gic: interrupt-controller { - compatible = "arm,cortex-a15-gic"; + compatible = "arm,gic-400", "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; reg = <0x0 0x02561000 0x0 0x1000>, <0x0 0x02562000 0x0 0x2000>, - <0x0 0x02564000 0x0 0x1000>, + <0x0 0x02564000 0x0 0x2000>, <0x0 0x02566000 0x0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; @@ -83,6 +83,11 @@ reg = <0x02310000 0x200>; }; + psc: power-sleep-controller@02350000 { + compatible = "syscon", "simple-mfd"; + reg = <0x02350000 0x1000>; + }; + devctrl: device-state-control@02620000 { compatible = "ti,keystone-devctrl", "syscon"; reg = <0x02620000 0x1000>; @@ -98,7 +103,7 @@ /include/ "keystone-clocks.dtsi" uart0: serial@02530c00 { - compatible = "ns16550a"; + compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; reg-io-width = <4>; @@ -108,7 +113,7 @@ }; uart1: serial@02531000 { - compatible = "ns16550a"; + compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; reg-io-width = <4>; diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts index 41acbb6dd6ab..4d2b15d6244a 100644 --- a/arch/arm/boot/dts/kirkwood-dir665.dts +++ b/arch/arm/boot/dts/kirkwood-dir665.dts @@ -194,6 +194,8 @@ }; dsa { + status = "disabled"; + compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; @@ -241,6 +243,53 @@ &mdio { status = "okay"; + + switch@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <ð0port>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; }; /* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set diff --git a/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi b/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi index 6548e68a20d0..b9125e5ed076 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi b/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi index cf2e69f0d54f..29d929535453 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts index 6dc0df2969f0..9cc05203baee 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts +++ b/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts @@ -17,17 +17,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts index edcba5c44b05..ff37e76ab551 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts +++ b/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts index 4b6450186af5..f602c059c718 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts +++ b/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts index 954ec1d5b6dc..ef8fc1a077f8 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts +++ b/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts index ecd5c12a805d..ce41d553b693 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts +++ b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/kirkwood-linkstation.dtsi index 36c54c9dfa30..b459042a904a 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation.dtsi +++ b/arch/arm/boot/dts/kirkwood-linkstation.dtsi @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts index 345fcac48dc7..df7851820507 100644 --- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts +++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts @@ -70,6 +70,8 @@ }; dsa { + status = "disabled"; + compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; @@ -207,6 +209,53 @@ &mdio { status = "okay"; + + switch@10 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <16>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "ethernet1"; + }; + + port@1 { + reg = <1>; + label = "ethernet2"; + }; + + port@2 { + reg = <2>; + label = "ethernet3"; + }; + + port@3 { + reg = <3>; + label = "ethernet4"; + }; + + port@4 { + reg = <4>; + label = "internet"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð0port>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; }; &uart0 { diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index 172a38c0b8a9..327023a477b8 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -112,6 +112,8 @@ }; dsa { + status = "disabled"; + compatible = "marvell,dsa"; #address-cells = <1>; #size-cells = <0>; @@ -159,6 +161,53 @@ &mdio { status = "okay"; + + switch@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð0port>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; }; ð0 { diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts index 6f771a99cb02..9ec5a65561e9 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts +++ b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts @@ -19,11 +19,6 @@ model = "Marvell RD88f6281 Reference design, with A0 or higher SoC"; compatible = "marvell,rd88f6281-a", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood"; - dsa { - switch@0 { - reg = <10 0>; /* MDIO address 10, switch 0 in tree */ - }; - }; }; &mdio { @@ -34,6 +29,10 @@ }; }; +&switch { + reg = <10>; +}; + ð1 { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts index 1a797381d3d4..6a4a65ec7944 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts +++ b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts @@ -33,3 +33,14 @@ ð1 { status = "disabled"; }; + +&switch { + reg = <0>; + + ports { + port@4 { + reg = <4>; + label = "wan"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi index d5aacf137e40..91f5da5dae5f 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi @@ -54,6 +54,8 @@ }; dsa { + status = "disabled"; + compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; @@ -115,6 +117,48 @@ &mdio { status = "okay"; + + switch: switch@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð0port>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + }; + }; }; ð0 { diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts index 1e9a72100a45..330aada6d33f 100644 --- a/arch/arm/boot/dts/kirkwood-topkick.dts +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -4,7 +4,7 @@ #include "kirkwood-6282.dtsi" / { - model = "Univeral Scientific Industrial Co. Topkick-1281P2"; + model = "Universal Scientific Industrial Co. Topkick-1281P2"; compatible = "usi,topkick-1281P2", "usi,topkick", "marvell,kirkwood-88f6282", "marvell,kirkwood"; memory { diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts index da8598402ab8..38faa90007d7 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts @@ -158,7 +158,7 @@ &mmc1 { interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins &mmc1_cd>; + pinctrl-0 = <&mmc1_pins>; wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */ cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>; /* gpio_110 */ vmmc-supply = <&vmmc1>; @@ -193,7 +193,8 @@ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ - OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_strobe.gpio_126 sdmmc1_wp*/ + OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_strobe.gpio_126 */ + OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d11.gpio_110 */ >; }; @@ -242,12 +243,6 @@ OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* sys_boot6.gpio_8 */ >; }; - - mmc1_cd: pinmux_mmc1_cd { - pinctrl-single,pins = < - OMAP3_WKUP_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d11.gpio_110 */ - >; - }; }; diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index b5841fab51c1..d81fe433e3c8 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -479,6 +479,8 @@ compatible = "nxp,lpc3220-pwm"; reg = <0x4005C000 0x4>; clocks = <&clk LPC32XX_CLK_PWM1>; + assigned-clocks = <&clk LPC32XX_CLK_PWM1>; + assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>; status = "disabled"; }; @@ -486,6 +488,8 @@ compatible = "nxp,lpc3220-pwm"; reg = <0x4005C004 0x4>; clocks = <&clk LPC32XX_CLK_PWM2>; + assigned-clocks = <&clk LPC32XX_CLK_PWM2>; + assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 368e21934285..45ea57fafa18 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -47,6 +47,7 @@ #include "skeleton64.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> / { compatible = "fsl,ls1021a"; @@ -70,14 +71,15 @@ #address-cells = <1>; #size-cells = <0>; - cpu@f00 { + cpu0: cpu@f00 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0xf00>; clocks = <&cluster1_clk>; + #cooling-cells = <2>; }; - cpu@f01 { + cpu1: cpu@f01 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0xf01>; @@ -108,11 +110,11 @@ ranges; gic: interrupt-controller@1400000 { - compatible = "arm,cortex-a7-gic"; + compatible = "arm,gic-400", "arm,cortex-a7-gic"; #interrupt-cells = <3>; interrupt-controller; reg = <0x0 0x1401000 0x0 0x1000>, - <0x0 0x1402000 0x0 0x1000>, + <0x0 0x1402000 0x0 0x2000>, <0x0 0x1404000 0x0 0x2000>, <0x0 0x1406000 0x0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; @@ -251,6 +253,84 @@ }; }; + tmu: tmu@1f00000 { + compatible = "fsl,qoriq-tmu"; + reg = <0x0 0x1f00000 0x0 0x10000>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>; + fsl,tmu-calibration = <0x00000000 0x0000000f + 0x00000001 0x00000017 + 0x00000002 0x0000001e + 0x00000003 0x00000026 + 0x00000004 0x0000002e + 0x00000005 0x00000035 + 0x00000006 0x0000003d + 0x00000007 0x00000044 + 0x00000008 0x0000004c + 0x00000009 0x00000053 + 0x0000000a 0x0000005b + 0x0000000b 0x00000064 + + 0x00010000 0x00000011 + 0x00010001 0x0000001c + 0x00010002 0x00000024 + 0x00010003 0x0000002b + 0x00010004 0x00000034 + 0x00010005 0x00000039 + 0x00010006 0x00000042 + 0x00010007 0x0000004c + 0x00010008 0x00000051 + 0x00010009 0x0000005a + 0x0001000a 0x00000063 + + 0x00020000 0x00000013 + 0x00020001 0x00000019 + 0x00020002 0x00000024 + 0x00020003 0x0000002c + 0x00020004 0x00000035 + 0x00020005 0x0000003d + 0x00020006 0x00000046 + 0x00020007 0x00000050 + 0x00020008 0x00000059 + + 0x00030000 0x00000002 + 0x00030001 0x0000000d + 0x00030002 0x00000019 + 0x00030003 0x00000024>; + #thermal-sensor-cells = <1>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert: cpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit: cpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; + dspi0: dspi@2100000 { compatible = "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/mps2-an385.dts b/arch/arm/boot/dts/mps2-an385.dts index 31c374d72a6f..aebbebfc25d1 100644 --- a/arch/arm/boot/dts/mps2-an385.dts +++ b/arch/arm/boot/dts/mps2-an385.dts @@ -59,7 +59,7 @@ stdout-path = "serial0:9600n8"; }; - memory { + memory@21000000 { device_type = "memory"; reg = <0x21000000 0x1000000>; }; diff --git a/arch/arm/boot/dts/mps2-an399.dts b/arch/arm/boot/dts/mps2-an399.dts index 5e7e5ca2edbf..349abf70b2a5 100644 --- a/arch/arm/boot/dts/mps2-an399.dts +++ b/arch/arm/boot/dts/mps2-an399.dts @@ -59,7 +59,7 @@ stdout-path = "serial0:9600n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x1000000>; }; diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/mps2.dtsi index efb8a03cb970..23467390558d 100644 --- a/arch/arm/boot/dts/mps2.dtsi +++ b/arch/arm/boot/dts/mps2.dtsi @@ -42,10 +42,12 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" #include "armv7-m.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; + oscclk0: clk-osc0 { compatible = "fixed-clock"; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts index 082ca8807c62..a4837985b7a7 100644 --- a/arch/arm/boot/dts/mt2701-evb.dts +++ b/arch/arm/boot/dts/mt2701-evb.dts @@ -24,6 +24,60 @@ }; }; +&auxadc { + status = "okay"; +}; + +&pio { + spi_pins_a: spi0@0 { + pins_spi { + pinmux = <MT2701_PIN_53_SPI0_CSN__FUNC_SPI0_CS>, + <MT2701_PIN_54_SPI0_CK__FUNC_SPI0_CK>, + <MT2701_PIN_55_SPI0_MI__FUNC_SPI0_MI>, + <MT2701_PIN_56_SPI0_MO__FUNC_SPI0_MO>; + bias-disable; + }; + }; + + spi_pins_b: spi1@0 { + pins_spi { + pinmux = <MT2701_PIN_7_SPI1_CSN__FUNC_SPI1_CS>, + <MT2701_PIN_8_SPI1_MI__FUNC_SPI1_MI>, + <MT2701_PIN_9_SPI1_MO__FUNC_SPI1_MO>, + <MT2701_PIN_199_SPI1_CLK__FUNC_SPI1_CK>; + bias-disable; + }; + }; + + spi_pins_c: spi2@0 { + pins_spi { + pinmux = <MT2701_PIN_101_SPI2_CSN__FUNC_SPI2_CS>, + <MT2701_PIN_102_SPI2_MI__FUNC_SPI2_MI>, + <MT2701_PIN_103_SPI2_MO__FUNC_SPI2_MO>, + <MT2701_PIN_104_SPI2_CLK__FUNC_SPI2_CK>; + bias-disable; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_a>; + status = "disabled"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_b>; + status = "disabled"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_c>; + status = "disabled"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 18596a2c58a1..803721050116 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -12,8 +12,11 @@ * GNU General Public License for more details. */ +#include <dt-bindings/clock/mt2701-clk.h> +#include <dt-bindings/power/mt2701-power.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/mt2701-resets.h> #include "skeleton64.dtsi" #include "mt2701-pinfunc.h" @@ -71,10 +74,48 @@ #clock-cells = <0>; }; - uart_clk: dummy26m { + clk26m: oscillator@0 { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <26000000>; + clock-output-names = "clk26m"; + }; + + rtc32k: oscillator@1 { + compatible = "fixed-clock"; #clock-cells = <0>; + clock-frequency = <32000>; + clock-output-names = "rtc32k"; + }; + + thermal-zones { + cpu_thermal: cpu_thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + + thermal-sensors = <&thermal 0>; + sustainable-power = <1000>; + + trips { + threshold: trip-point@0 { + temperature = <68000>; + hysteresis = <2000>; + type = "passive"; + }; + + target: trip-point@1 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu_crit@0 { + temperature = <115000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; }; timer { @@ -86,17 +127,24 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; - pio: pinctrl@10005000 { - compatible = "mediatek,mt2701-pinctrl"; - reg = <0 0x1000b000 0 0x1000>; - mediatek,pctl-regmap = <&syscfg_pctl_a>; - pins-are-numbered; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + topckgen: syscon@10000000 { + compatible = "mediatek,mt2701-topckgen", "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg: syscon@10001000 { + compatible = "mediatek,mt2701-infracfg", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pericfg: syscon@10003000 { + compatible = "mediatek,mt2701-pericfg", "syscon"; + reg = <0 0x10003000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; }; syscfg_pctl_a: syscfg@10005000 { @@ -104,6 +152,17 @@ reg = <0 0x10005000 0 0x1000>; }; + scpsys: scpsys@10006000 { + compatible = "mediatek,mt2701-scpsys", "syscon"; + #power-domain-cells = <1>; + reg = <0 0x10006000 0 0x1000>; + infracfg = <&infracfg>; + clocks = <&topckgen CLK_TOP_MM_SEL>, + <&topckgen CLK_TOP_MFG_SEL>, + <&topckgen CLK_TOP_ETHIF_SEL>; + clock-names = "mm", "mfg", "ethif"; + }; + watchdog: watchdog@10007000 { compatible = "mediatek,mt2701-wdt", "mediatek,mt6589-wdt"; @@ -119,6 +178,29 @@ clock-names = "system-clk", "rtc-clk"; }; + pio: pinctrl@1000b000 { + compatible = "mediatek,mt2701-pinctrl"; + reg = <0 0x1000b000 0 0x1000>; + mediatek,pctl-regmap = <&syscfg_pctl_a>; + pins-are-numbered; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + }; + + smi_common: smi@1000c000 { + compatible = "mediatek,mt2701-smi-common"; + reg = <0 0x1000c000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_SMI>, + <&mmsys CLK_MM_SMI_COMMON>, + <&infracfg CLK_INFRA_SMI>; + clock-names = "apb", "smi", "async"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>; + }; + sysirq: interrupt-controller@10200100 { compatible = "mediatek,mt2701-sysirq", "mediatek,mt6577-sysirq"; @@ -128,23 +210,49 @@ reg = <0 0x10200100 0 0x1c>; }; + iommu: mmsys_iommu@10205000 { + compatible = "mediatek,mt2701-m4u"; + reg = <0 0x10205000 0 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_M4U>; + clock-names = "bclk"; + mediatek,larbs = <&larb0 &larb1 &larb2>; + #iommu-cells = <1>; + }; + + apmixedsys: syscon@10209000 { + compatible = "mediatek,mt2701-apmixedsys", "syscon"; + reg = <0 0x10209000 0 0x1000>; + #clock-cells = <1>; + }; + gic: interrupt-controller@10211000 { compatible = "arm,cortex-a7-gic"; interrupt-controller; #interrupt-cells = <3>; interrupt-parent = <&gic>; reg = <0 0x10211000 0 0x1000>, - <0 0x10212000 0 0x1000>, + <0 0x10212000 0 0x2000>, <0 0x10214000 0 0x2000>, <0 0x10216000 0 0x2000>; }; + auxadc: adc@11001000 { + compatible = "mediatek,mt2701-auxadc"; + reg = <0 0x11001000 0 0x1000>; + clocks = <&pericfg CLK_PERI_AUXADC>; + clock-names = "main"; + #io-channel-cells = <1>; + status = "disabled"; + }; + uart0: serial@11002000 { compatible = "mediatek,mt2701-uart", "mediatek,mt6577-uart"; reg = <0 0x11002000 0 0x400>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -153,7 +261,8 @@ "mediatek,mt6577-uart"; reg = <0 0x11003000 0 0x400>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -162,7 +271,8 @@ "mediatek,mt6577-uart"; reg = <0 0x11004000 0 0x400>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -171,7 +281,148 @@ "mediatek,mt6577-uart"; reg = <0 0x11005000 0 0x400>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + spi0: spi@1100a000 { + compatible = "mediatek,mt2701-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100a000 0 0x100>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI0_SEL>, + <&pericfg CLK_PERI_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + thermal: thermal@1100b000 { + #thermal-sensor-cells = <0>; + compatible = "mediatek,mt2701-thermal"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>; + clock-names = "therm", "auxadc"; + resets = <&pericfg MT2701_PERI_THERM_SW_RST>; + reset-names = "therm"; + mediatek,auxadc = <&auxadc>; + mediatek,apmixedsys = <&apmixedsys>; + }; + + nandc: nfi@1100d000 { + compatible = "mediatek,mt2701-nfc"; + reg = <0 0x1100d000 0 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_NFI>, + <&pericfg CLK_PERI_NFI_PAD>; + clock-names = "nfi_clk", "pad_clk"; + status = "disabled"; + ecc-engine = <&bch>; + #address-cells = <1>; + #size-cells = <0>; + }; + + bch: ecc@1100e000 { + compatible = "mediatek,mt2701-ecc"; + reg = <0 0x1100e000 0 0x1000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_NFI_ECC>; + clock-names = "nfiecc_clk"; + status = "disabled"; + }; + + spi1: spi@11016000 { + compatible = "mediatek,mt2701-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11016000 0 0x100>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI1_SEL>, + <&pericfg CLK_PERI_SPI1>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; status = "disabled"; }; + + spi2: spi@11017000 { + compatible = "mediatek,mt2701-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11017000 0 0x1000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI2_SEL>, + <&pericfg CLK_PERI_SPI2>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + mmsys: syscon@14000000 { + compatible = "mediatek,mt2701-mmsys", "syscon"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + + larb0: larb@14010000 { + compatible = "mediatek,mt2701-smi-larb"; + reg = <0 0x14010000 0 0x1000>; + mediatek,smi = <&smi_common>; + clocks = <&mmsys CLK_MM_SMI_LARB0>, + <&mmsys CLK_MM_SMI_LARB0>; + clock-names = "apb", "smi"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>; + }; + + imgsys: syscon@15000000 { + compatible = "mediatek,mt2701-imgsys", "syscon"; + reg = <0 0x15000000 0 0x1000>; + #clock-cells = <1>; + }; + + larb2: larb@15001000 { + compatible = "mediatek,mt2701-smi-larb"; + reg = <0 0x15001000 0 0x1000>; + mediatek,smi = <&smi_common>; + clocks = <&imgsys CLK_IMG_SMI_COMM>, + <&imgsys CLK_IMG_SMI_COMM>; + clock-names = "apb", "smi"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; + }; + + vdecsys: syscon@16000000 { + compatible = "mediatek,mt2701-vdecsys", "syscon"; + reg = <0 0x16000000 0 0x1000>; + #clock-cells = <1>; + }; + + larb1: larb@16010000 { + compatible = "mediatek,mt2701-smi-larb"; + reg = <0 0x16010000 0 0x1000>; + mediatek,smi = <&smi_common>; + clocks = <&vdecsys CLK_VDEC_CKGEN>, + <&vdecsys CLK_VDEC_LARB>; + clock-names = "apb", "smi"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>; + }; + + hifsys: syscon@1a000000 { + compatible = "mediatek,mt2701-hifsys", "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + }; + + ethsys: syscon@1b000000 { + compatible = "mediatek,mt2701-ethsys", "syscon"; + reg = <0 0x1b000000 0 0x1000>; + #clock-cells = <1>; + }; + + bdpsys: syscon@1c000000 { + compatible = "mediatek,mt2701-bdpsys", "syscon"; + reg = <0 0x1c000000 0 0x1000>; + #clock-cells = <1>; + }; }; diff --git a/arch/arm/boot/dts/mt6580.dtsi b/arch/arm/boot/dts/mt6580.dtsi index 06fdf6c2d5fd..a349dba5ff79 100644 --- a/arch/arm/boot/dts/mt6580.dtsi +++ b/arch/arm/boot/dts/mt6580.dtsi @@ -91,7 +91,7 @@ #interrupt-cells = <3>; interrupt-parent = <&gic>; reg = <0x10211000 0x1000>, - <0x10212000 0x1000>, + <0x10212000 0x2000>, <0x10214000 0x2000>, <0x10216000 0x2000>; }; diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi index 88b3cb128698..0d6f60af7640 100644 --- a/arch/arm/boot/dts/mt6589.dtsi +++ b/arch/arm/boot/dts/mt6589.dtsi @@ -102,7 +102,7 @@ #interrupt-cells = <3>; interrupt-parent = <&gic>; reg = <0x10211000 0x1000>, - <0x10212000 0x1000>, + <0x10212000 0x2000>, <0x10214000 0x2000>, <0x10216000 0x2000>; }; diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts index a9ee2d64c6f7..b60b41cad592 100644 --- a/arch/arm/boot/dts/mt7623-evb.dts +++ b/arch/arm/boot/dts/mt7623-evb.dts @@ -1,6 +1,6 @@ /* * Copyright (c) 2016 MediaTek Inc. - * Author: John Crispin <blogic@openwrt.org> + * Author: John Crispin <john@phrozen.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index fd2b614ae6f3..402579ab70d2 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -1,6 +1,6 @@ /* * Copyright (c) 2016 MediaTek Inc. - * Author: John Crispin <blogic@openwrt.org> + * Author: John Crispin <john@phrozen.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -104,7 +104,7 @@ #interrupt-cells = <3>; interrupt-parent = <&gic>; reg = <0 0x10211000 0 0x1000>, - <0 0x10212000 0 0x1000>, + <0 0x10212000 0 0x2000>, <0 0x10214000 0 0x2000>, <0 0x10216000 0 0x2000>; }; diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi index 52086c8018e2..916c095d11b9 100644 --- a/arch/arm/boot/dts/mt8127.dtsi +++ b/arch/arm/boot/dts/mt8127.dtsi @@ -129,7 +129,7 @@ #interrupt-cells = <3>; interrupt-parent = <&gic>; reg = <0 0x10211000 0 0x1000>, - <0 0x10212000 0 0x1000>, + <0 0x10212000 0 0x2000>, <0 0x10214000 0 0x2000>, <0 0x10216000 0 0x2000>; }; diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi index 1d7f92bdcb9c..a97b4ee4ae79 100644 --- a/arch/arm/boot/dts/mt8135.dtsi +++ b/arch/arm/boot/dts/mt8135.dtsi @@ -221,7 +221,7 @@ #interrupt-cells = <3>; interrupt-parent = <&gic>; reg = <0 0x10211000 0 0x1000>, - <0 0x10212000 0 0x1000>, + <0 0x10212000 0 0x2000>, <0 0x10214000 0 0x2000>, <0 0x10216000 0 0x2000>; }; diff --git a/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi b/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi index e211a3c47a76..e172029a0c4d 100644 --- a/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi +++ b/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi b/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi index 68d75e79a360..c2d87ba6190a 100644 --- a/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi +++ b/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 4f793a025a72..f1d6de8b3c19 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -17,6 +17,7 @@ interrupt-parent = <&intc>; #address-cells = <1>; #size-cells = <1>; + chosen { }; aliases { serial0 = &uart1; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index fb712b9aa874..aba542d63d6d 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -38,6 +38,7 @@ reg = <0x0 0x1000>; #address-cells = <1>; #size-cells = <1>; + #pinctrl-cells = <1>; ranges = <0 0x0 0x1000>; omap2420_pmx: pinmux@30 { @@ -46,6 +47,7 @@ reg = <0x30 0x0113>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; pinctrl-single,register-width = <8>; pinctrl-single,function-mask = <0x3f>; }; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 455aaea407dd..84635eeb99cd 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -38,6 +38,7 @@ reg = <0x2000 0x1000>; #address-cells = <1>; #size-cells = <1>; + #pinctrl-cells = <1>; ranges = <0 0x2000 0x1000>; omap2430_pmx: pinmux@30 { @@ -46,6 +47,7 @@ reg = <0x30 0x0154>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; pinctrl-single,register-width = <8>; pinctrl-single,function-mask = <0x3f>; }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 85e297ed0ea1..673cee2234b2 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -27,6 +27,7 @@ aliases { display0 = &dvi0; display1 = &tv0; + ethernet = ðernet; }; leds { @@ -348,6 +349,21 @@ &usbhsehci { phys = <0 &hsusb2_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + hub@2 { + compatible = "usb424,9514"; + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@1 { + compatible = "usb424,ec00"; + reg = <1>; + }; + }; }; &vaux2 { diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 54c4c07bbe4a..e268efde6c6d 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -126,27 +126,6 @@ #address-cells = <1>; #size-cells = <1>; - - partition@0 { - label = "SPL"; - reg = <0 0x100000>; - }; - partition@80000 { - label = "U-Boot"; - reg = <0x100000 0x180000>; - }; - partition@1c0000 { - label = "Environment"; - reg = <0x280000 0x100000>; - }; - partition@280000 { - label = "Kernel"; - reg = <0x380000 0x300000>; - }; - partition@780000 { - label = "Filesystem"; - reg = <0x680000 0x1f980000>; - }; }; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 87ca50b53002..b64cfda8dbb7 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -47,7 +47,7 @@ compatible = "gpio-leds"; heartbeat { label = "debug::sleep"; - gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio162 */ + gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* 162 */ linux,default-trigger = "default-on"; pinctrl-names = "default"; pinctrl-0 = <&debug_leds>; @@ -625,6 +625,7 @@ reg = <0x55>; }; + /* Stereo headphone amplifier */ tpa6130a2: tpa6130a2@60 { compatible = "ti,tpa6130a2"; reg = <0x60>; @@ -734,6 +735,8 @@ vmmc_aux-supply = <&vsim>; bus-width = <8>; non-removable; + no-sdio; + no-sd; }; &mmc3 { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 353d818ce5a6..a3ff4933dbc1 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -17,6 +17,7 @@ interrupt-parent = <&intc>; #address-cells = <1>; #size-cells = <1>; + chosen { }; aliases { i2c0 = &i2c1; @@ -106,6 +107,7 @@ reg = <0x30 0x238>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <16>; @@ -145,6 +147,7 @@ reg = <0xa00 0x5c>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <16>; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index e41c52d3b113..834fdf13601f 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -34,6 +34,7 @@ reg = <0x480025d8 0x24>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <16>; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 718fa88407cd..d1a3e56b50ce 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -66,6 +66,7 @@ reg = <0x480025a0 0x5c>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <16>; diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts new file mode 100644 index 000000000000..f3ccb4ceed9e --- /dev/null +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -0,0 +1,188 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap443x.dtsi" + +/ { + model = "Motorola Droid 4 XT894"; + compatible = "motorola,droid4", "ti,omap4430", "ti,omap4"; + + chosen { + stdout-path = &uart3; + }; + + /* + * We seem to have only 1021 MB accessible, 1021 - 1022 is locked, + * then 1023 - 1024 seems to contain mbm. For SRAM, see the notes + * below about SRAM and L3_ICLK2 being unused by default, + */ + memory { + device_type = "memory"; + reg = <0x80000000 0x3fd00000>; /* 1021 MB */ + }; + + /* CPCAP really supports 1650000 to 3400000 range */ + vmmc: regulator-mmc { + compatible = "regulator-fixed"; + regulator-name = "vmmc"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + /* CPCAP really supports 3000000 to 3100000 range */ + vemmc: regulator-emmc { + compatible = "regulator-fixed"; + regulator-name = "vemmc"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + /* CPCAP really supports 1650000 to 1950000 range */ + wl12xx_vmmc: regulator-wl12xx { + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1650000>; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; /* gpio94 */ + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +/* L3_2 interconnect is unused, SRAM, GPMC and L3_ICLK2 disabled */ +&gpmc { + status = "disabled"; +}; + +&mmc1 { + vmmc-supply = <&vmmc>; + bus-width = <4>; + cd-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */ +}; + +&mmc2 { + vmmc-supply = <&vemmc>; + bus-width = <8>; + non-removable; +}; + +&mmc3 { + vmmc-supply = <&wl12xx_vmmc>; + interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core 0xde>; + + non-removable; + bus-width = <4>; + cap-power-off-card; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1283"; + reg = <2>; + interrupt-parent = <&gpio4>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; /* gpio100 */ + ref-clock-frequency = <26000000>; + tcxo-clock-frequency = <26000000>; + }; +}; + +/* L3_2 interconnect is unused, SRAM, GPMC and L3_ICLK2 disabled */ +&ocmcram { + status = "disabled"; +}; + +&omap4_pmx_core { + usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins { + /* gpio_60 */ + pinctrl-single,pins = < + OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) + >; + }; + + usb_ulpi_pins: pinmux_usb_ulpi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x196, MUX_MODE7) + OMAP4_IOPAD(0x198, MUX_MODE7) + OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0) + >; + }; + + /* usb0_otg_dp and usb0_otg_dm */ + usb_utmi_pins: pinmux_usb_utmi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0) + OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0) + OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) + >; + }; + + /* uart3_tx_irtx and uart3_rx_irrx */ + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x196, MUX_MODE7) + OMAP4_IOPAD(0x198, MUX_MODE7) + OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1ba, MUX_MODE2) + OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2) + OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) + >; + }; +}; + +&omap4_pmx_wkup { + usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins { + /* gpio_wk0 */ + pinctrl-single,pins = < + OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3) + >; + }; +}; + +&uart3 { + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core 0x17c>; +}; + +/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */ +&usb_otg_hs { + interface-type = <1>; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 1673689e6705..edbc4090297d 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -16,6 +16,7 @@ aliases { display0 = &dvi0; display1 = &hdmi0; + ethernet = ðernet; }; leds: leds { @@ -520,6 +521,21 @@ &usbhsehci { phys = <&hsusb1_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + hub@1 { + compatible = "usb424,9514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@1 { + compatible = "usb424,ec00"; + reg = <1>; + }; + }; }; &dss { diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 0ced079b7ae3..578c53f08309 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -15,6 +15,7 @@ interrupt-parent = <&wakeupgen>; #address-cells = <1>; #size-cells = <1>; + chosen { }; aliases { i2c0 = &i2c1; @@ -184,6 +185,7 @@ reg = <0x40 0x0196>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <16>; @@ -256,6 +258,7 @@ reg = <0x1e040 0x0038>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <16>; diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts index 8fc19218057e..fef2a446b61c 100644 --- a/arch/arm/boot/dts/omap5-igep0050.dts +++ b/arch/arm/boot/dts/omap5-igep0050.dts @@ -19,6 +19,10 @@ reg = <0x0 0x80000000 0 0x7f000000>; /* 2032 MB */ }; + aliases { + ethernet = ðernet; + }; + gpio_keys { compatible = "gpio-keys"; pinctrl-0 = <&power_button_pin>; @@ -116,3 +120,20 @@ OMAP5_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */ >; }; + +&usbhsehci { + #address-cells = <1>; + #size-cells = <0>; + + hub@2 { + compatible = "usb424,3503"; + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@3 { + compatible = "usb424,7500"; + reg = <3>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 53d31a87b44b..0d42c46f13e7 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -18,6 +18,10 @@ reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */ }; + aliases { + ethernet = ðernet; + }; + leds { compatible = "gpio-leds"; led1 { @@ -27,12 +31,98 @@ default-state = "off"; }; }; + + evm_keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&evm_keys_pins>; + + #address-cells = <7>; + #size-cells = <0>; + + btn1 { + label = "BTN1"; + linux,code = <169>; + gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 */ + wakeup-source; + autorepeat; + debounce_interval = <50>; + }; + }; + + evm_leds { + compatible = "gpio-leds"; + + led1 { + label = "omap5:red:led"; + gpios = <&gpio9 17 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led2 { + label = "omap5:green:led"; + gpios = <&gpio9 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led3 { + label = "omap5:blue:led"; + gpios = <&gpio9 19 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc2"; + default-state = "off"; + }; + + led4 { + label = "omap5:green:led1"; + gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led5 { + label = "omap5:green:led2"; + gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + default-state = "off"; + }; + + led6 { + label = "omap5:green:led3"; + gpios = <&gpio9 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led7 { + label = "omap5:green:led4"; + gpios = <&gpio9 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + default-state = "off"; + }; + + led8 { + label = "omap5:green:led5"; + gpios = <&gpio9 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; }; &hdmi { vdda-supply = <&ldo4_reg>; }; +&i2c1 { + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; +}; + &i2c5 { pinctrl-names = "default"; pinctrl-0 = <&i2c5_pins>; @@ -48,6 +138,12 @@ }; &omap5_pmx_core { + evm_keys_pins: pinmux_evm_keys_gpio_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x0b6, PIN_INPUT | MUX_MODE6) /* gpio3_83 */ + >; + }; + i2c5_pins: pinmux_i2c5_pins { pinctrl-single,pins = < OMAP5_IOPAD(0x1c6, PIN_INPUT | MUX_MODE0) /* i2c5_scl */ @@ -72,6 +168,23 @@ >; }; +&usbhsehci { + #address-cells = <1>; + #size-cells = <0>; + + hub@2 { + compatible = "usb424,3503"; + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + ethernet: usbether@3 { + compatible = "usb424,9730"; + reg = <3>; + }; +}; + &wlcore { compatible = "ti,wl1837"; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 25262118ec3d..222155ca8ad7 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -17,6 +17,7 @@ compatible = "ti,omap5"; interrupt-parent = <&wakeupgen>; + chosen { }; aliases { i2c0 = &i2c1; @@ -91,7 +92,7 @@ interrupt-controller; #interrupt-cells = <3>; reg = <0 0x48211000 0 0x1000>, - <0 0x48212000 0 0x1000>, + <0 0x48212000 0 0x2000>, <0 0x48214000 0 0x2000>, <0 0x48216000 0 0x2000>; interrupt-parent = <&gic>; @@ -171,6 +172,7 @@ reg = <0x40 0x01b6>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <16>; @@ -270,6 +272,7 @@ reg = <0xc840 0x003c>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <16>; @@ -985,6 +988,7 @@ phy-names = "sata-phy"; clocks = <&sata_ref_clk>; ti,hwmods = "sata"; + ports-implemented = <0x1>; }; dss: dss@58000000 { diff --git a/arch/arm/boot/dts/orion5x-kuroboxpro.dts b/arch/arm/boot/dts/orion5x-kuroboxpro.dts index 1a672b098d0b..e28b568e741a 100644 --- a/arch/arm/boot/dts/orion5x-kuroboxpro.dts +++ b/arch/arm/boot/dts/orion5x-kuroboxpro.dts @@ -17,17 +17,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/orion5x-linkstation-lschl.dts b/arch/arm/boot/dts/orion5x-linkstation-lschl.dts new file mode 100644 index 000000000000..ee751995c8d0 --- /dev/null +++ b/arch/arm/boot/dts/orion5x-linkstation-lschl.dts @@ -0,0 +1,171 @@ +/* + * Device Tree file for Buffalo Linkstation LS-CHLv3 + * + * Copyright (C) 2016 Ash Hughes <ashley.hughes@blueyonder.co.uk> + * Copyright (C) 2015-2017 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "orion5x-linkstation.dtsi" +#include "mvebu-linkstation-gpio-simple.dtsi" +#include "mvebu-linkstation-fan.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Buffalo Linkstation LiveV3 (LS-CHL)"; + compatible = "buffalo,lschl", "marvell,orion5x-88f5182", "marvell,orion5x"; + + memory { /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + gpio_keys { + func { + label = "Function Button"; + linux,code = <KEY_OPTION>; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + power-on-switch { + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + }; + + power-auto-switch { + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_leds { + pinctrl-0 = <&pmx_led_power &pmx_led_alarm &pmx_led_info &pmx_led_func>; + blue-power-led { + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + }; + + red-alarm-led { + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + }; + + amber-info-led { + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + }; + + func { + label = "lschl:func:blue:top"; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_fan { + gpios = <&gpio0 14 GPIO_ACTIVE_LOW + &gpio0 16 GPIO_ACTIVE_LOW>; + + alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + }; +}; + +&pinctrl { + pmx_led_power: pmx-leds { + marvell,pins = "mpp0"; + marvell,function = "gpio"; + }; + + pmx_power_hdd: pmx-power-hdd { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + + pmx_led_alarm: pmx-leds { + marvell,pins = "mpp2"; + marvell,function = "gpio"; + }; + + pmx_led_info: pmx-leds { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp6"; + marvell,function = "gpio"; + }; + + pmx_power_switch: pmx-power-switch { + marvell,pins = "mpp8", "mpp10", "mpp15"; + marvell,function = "gpio"; + }; + + pmx_power_usb: pmx-power-usb { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + + pmx_led_func: pmx-leds { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; + + pmx_sw_init: pmx-sw-init { + marvell,pins = "mpp7"; + marvell,function = "gpio"; + }; +}; + +&hdd_power { + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; +}; + +&usb_power { + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; +}; + diff --git a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts index 51dc734cd5b9..9f6fedd39170 100644 --- a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts @@ -18,17 +18,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -37,11 +37,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts index 0eead400f427..7f77ce8cc1fc 100644 --- a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/orion5x-linkstation.dtsi b/arch/arm/boot/dts/orion5x-linkstation.dtsi index ed456ab35fd8..e9991c83d7b7 100644 --- a/arch/arm/boot/dts/orion5x-linkstation.dtsi +++ b/arch/arm/boot/dts/orion5x-linkstation.dtsi @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/orion5x-lswsgl.dts b/arch/arm/boot/dts/orion5x-lswsgl.dts index 6b47a52ceb9c..ea966ec03dd0 100644 --- a/arch/arm/boot/dts/orion5x-lswsgl.dts +++ b/arch/arm/boot/dts/orion5x-lswsgl.dts @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi index ce13705c38d4..46aa6db8353a 100644 --- a/arch/arm/boot/dts/ox810se.dtsi +++ b/arch/arm/boot/dts/ox810se.dtsi @@ -7,6 +7,8 @@ */ /include/ "skeleton.dtsi" +#include <dt-bindings/clock/oxsemi,ox810se.h> +#include <dt-bindings/reset/oxsemi,ox810se.h> / { compatible = "oxsemi,ox810se"; @@ -242,7 +244,7 @@ current-speed = <115200>; no-loopback-test; status = "disabled"; - resets = <&reset 17>; + resets = <&reset RESET_UART1>; }; uart1: serial@300000 { @@ -256,7 +258,7 @@ current-speed = <115200>; no-loopback-test; status = "disabled"; - resets = <&reset 18>; + resets = <&reset RESET_UART2>; }; uart2: serial@900000 { @@ -270,7 +272,7 @@ current-speed = <115200>; no-loopback-test; status = "disabled"; - resets = <&reset 22>; + resets = <&reset RESET_UART3>; }; uart3: serial@a00000 { @@ -284,7 +286,7 @@ current-speed = <115200>; no-loopback-test; status = "disabled"; - resets = <&reset 23>; + resets = <&reset RESET_UART4>; }; }; diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi new file mode 100644 index 000000000000..459207536a46 --- /dev/null +++ b/arch/arm/boot/dts/ox820.dtsi @@ -0,0 +1,298 @@ +/* + * ox820.dtsi - Device tree file for Oxford Semiconductor OX820 SoC + * + * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> + * + * Licensed under GPLv2 or later + */ + +/include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/oxsemi,ox820.h> +#include <dt-bindings/reset/oxsemi,ox820.h> + +/ { + compatible = "oxsemi,ox820"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "oxsemi,ox820-smp"; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,arm11mpcore"; + clocks = <&armclk>; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,arm11mpcore"; + clocks = <&armclk>; + reg = <1>; + }; + }; + + memory { + /* Max 512MB @ 0x60000000 */ + reg = <0x60000000 0x20000000>; + }; + + clocks { + osc: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + gmacclk: gmacclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + sysclk: sysclk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clocks = <&osc>; + }; + + plla: plla { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <850000000>; + }; + + armclk: armclk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clocks = <&plla>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + interrupt-parent = <&gic>; + + nandc: nand-controller@41000000 { + compatible = "oxsemi,ox820-nand"; + reg = <0x41000000 0x100000>; + clocks = <&stdclk CLK_820_NAND>; + resets = <&reset RESET_NAND>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + etha: ethernet@40400000 { + compatible = "oxsemi,ox820-dwmac", "snps,dwmac"; + reg = <0x40400000 0x2000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq"; + mac-address = [000000000000]; /* Filled in by U-Boot */ + phy-mode = "rgmii"; + + clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>; + clock-names = "gmac", "stmmaceth"; + resets = <&reset RESET_MAC>; + + /* Regmap for sys registers */ + oxsemi,sys-ctrl = <&sys>; + + status = "disabled"; + }; + + apb-bridge@44000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0x44000000 0x1000000>; + + pinctrl: pinctrl { + compatible = "oxsemi,ox820-pinctrl"; + + /* Regmap for sys registers */ + oxsemi,sys-ctrl = <&sys>; + + pinctrl_uart0: uart0 { + uart0 { + pins = "gpio30", "gpio31"; + function = "fct5"; + }; + }; + + pinctrl_uart0_modem: uart0_modem { + uart0_modem_a { + pins = "gpio24", "gpio24", "gpio26", "gpio27"; + function = "fct4"; + }; + uart0_modem_b { + pins = "gpio28", "gpio29"; + function = "fct5"; + }; + }; + + pinctrl_uart1: uart1 { + uart1 { + pins = "gpio7", "gpio8"; + function = "fct4"; + }; + }; + + pinctrl_uart1_modem: uart1_modem { + uart1_modem { + pins = "gpio5", "gpio6", "gpio40", "gpio41", "gpio42", "gpio43"; + function = "fct4"; + }; + }; + + pinctrl_etha_mdio: etha_mdio { + etha_mdio { + pins = "gpio3", "gpio4"; + function = "fct1"; + }; + }; + + pinctrl_nand: nand { + nand { + pins = "gpio12", "gpio13", "gpio14", "gpio15", + "gpio16", "gpio17", "gpio18", "gpio19", + "gpio20", "gpio21", "gpio22", "gpio23", + "gpio24"; + function = "fct1"; + }; + }; + }; + + gpio0: gpio@000000 { + compatible = "oxsemi,ox820-gpio"; + reg = <0x000000 0x100000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <32>; + oxsemi,gpio-bank = <0>; + gpio-ranges = <&pinctrl 0 0 32>; + }; + + gpio1: gpio@100000 { + compatible = "oxsemi,ox820-gpio"; + reg = <0x100000 0x100000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <18>; + oxsemi,gpio-bank = <1>; + gpio-ranges = <&pinctrl 0 32 18>; + }; + + uart0: serial@200000 { + compatible = "ns16550a"; + reg = <0x200000 0x100000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <0>; + fifo-size = <16>; + reg-io-width = <1>; + current-speed = <115200>; + no-loopback-test; + status = "disabled"; + clocks = <&sysclk>; + resets = <&reset RESET_UART1>; + }; + + uart1: serial@300000 { + compatible = "ns16550a"; + reg = <0x200000 0x100000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <0>; + fifo-size = <16>; + reg-io-width = <1>; + current-speed = <115200>; + no-loopback-test; + status = "disabled"; + clocks = <&sysclk>; + resets = <&reset RESET_UART2>; + }; + + rps@400000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0x400000 0x100000>; + + intc: interrupt-controller@0 { + compatible = "oxsemi,ox820-rps-irq", "oxsemi,ox810se-rps-irq"; + interrupt-controller; + reg = <0 0x200>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + valid-mask = <0xFFFFFFFF>; + clear-mask = <0>; + }; + + timer0: timer@200 { + compatible = "oxsemi,ox820-rps-timer"; + reg = <0x200 0x40>; + clocks = <&sysclk>; + interrupt-parent = <&intc>; + interrupts = <4>; + }; + }; + + sys: sys-ctrl@e00000 { + compatible = "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd"; + reg = <0xe00000 0x200000>; + + reset: reset-controller { + compatible = "oxsemi,ox820-reset", "oxsemi,ox810se-reset"; + #reset-cells = <1>; + }; + + stdclk: stdclk { + compatible = "oxsemi,ox820-stdclk", "oxsemi,ox810se-stdclk"; + #clock-cells = <1>; + }; + }; + }; + + apb-bridge@47000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0x47000000 0x1000000>; + + scu: scu@0 { + compatible = "arm,arm11mp-scu"; + reg = <0x0 0x100>; + }; + + local-timer@600 { + compatible = "arm,arm11mp-twd-timer"; + reg = <0x600 0x20>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3)|IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&armclk>; + }; + + gic: gic@1000 { + compatible = "arm,arm11mp-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x1000 0x1000>, + <0x100 0x500>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi new file mode 100644 index 000000000000..f9f4726396a0 --- /dev/null +++ b/arch/arm/boot/dts/pxa25x.dtsi @@ -0,0 +1,117 @@ +/* + * Copyright (C) 2016 Robert Jarzmik <robert.jarzmik@free.fr> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include "pxa2xx.dtsi" +#include "dt-bindings/clock/pxa-clock.h" + +/ { + model = "Marvell PXA25x family SoC"; + compatible = "marvell,pxa250"; + + clocks { + /* + * The muxing of external clocks/internal dividers for osc* clock + * sources has been hidden under the carpet by now. + */ + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clks: pxa2xx_clks@41300004 { + compatible = "marvell,pxa250-core-clocks"; + #clock-cells = <1>; + status = "okay"; + }; + + /* timer oscillator */ + clktimer: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <3686400>; + clock-output-names = "ostimer"; + }; + }; + + pxabus { + pdma: dma-controller@40000000 { + compatible = "marvell,pdma-1.0"; + reg = <0x40000000 0x10000>; + interrupts = <25>; + #dma-channels = <16>; + #dma-cells = <2>; + #dma-requests = <40>; + status = "okay"; + }; + + pxairq: interrupt-controller@40d00000 { + marvell,intc-priority; + marvell,intc-nr-irqs = <32>; + }; + + pinctrl: pinctrl@40e00000 { + reg = <0x40e00054 0x20 0x40e0000c 0xc 0x40e0010c 4 + 0x40f00020 0x10>; + compatible = "marvell,pxa25x-pinctrl"; + }; + + gpio: gpio@40e00000 { + compatible = "intel,pxa25x-gpio"; + gpio-ranges = <&pinctrl 0 0 84>; + clocks = <&clks CLK_NONE>; + }; + + pwm0: pwm@40b00000 { + compatible = "marvell,pxa250-pwm"; + reg = <0x40b00000 0x10>; + #pwm-cells = <1>; + clocks = <&clks CLK_PWM0>; + }; + + pwm1: pwm@40b00010 { + compatible = "marvell,pxa250-pwm"; + reg = <0x40b00010 0x10>; + #pwm-cells = <1>; + clocks = <&clks CLK_PWM1>; + }; + }; + + timer@40a00000 { + compatible = "marvell,pxa-timer"; + reg = <0x40a00000 0x20>; + interrupts = <26>; + clocks = <&clktimer>; + status = "okay"; + }; + + pxa250_opp_table: opp_table0 { + compatible = "operating-points-v2"; + + opp@99532800 { + opp-hz = /bits/ 64 <99532800>; + opp-microvolt = <1000000 950000 1650000>; + clock-latency-ns = <20>; + }; + opp@199065600 { + opp-hz = /bits/ 64 <199065600>; + opp-microvolt = <1000000 950000 1650000>; + clock-latency-ns = <20>; + }; + opp@298598400 { + opp-hz = /bits/ 64 <298598400>; + opp-microvolt = <1100000 1045000 1650000>; + clock-latency-ns = <20>; + }; + opp@398131200 { + opp-hz = /bits/ 64 <398131200>; + opp-microvolt = <1300000 1235000 1650000>; + clock-latency-ns = <20>; + }; + }; +}; diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi index 9e73dc6b3ed3..e0fab48ba6fa 100644 --- a/arch/arm/boot/dts/pxa27x.dtsi +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -137,4 +137,44 @@ clocks = <&clks CLK_OSTIMER>; status = "okay"; }; + + pxa270_opp_table: opp_table0 { + compatible = "operating-points-v2"; + + opp@104000000 { + opp-hz = /bits/ 64 <104000000>; + opp-microvolt = <900000 900000 1705000>; + clock-latency-ns = <20>; + }; + opp@156000000 { + opp-hz = /bits/ 64 <156000000>; + opp-microvolt = <1000000 1000000 1705000>; + clock-latency-ns = <20>; + }; + opp@208000000 { + opp-hz = /bits/ 64 <208000000>; + opp-microvolt = <1180000 1180000 1705000>; + clock-latency-ns = <20>; + }; + opp@312000000 { + opp-hz = /bits/ 64 <312000000>; + opp-microvolt = <1250000 1250000 1705000>; + clock-latency-ns = <20>; + }; + opp@416000000 { + opp-hz = /bits/ 64 <416000000>; + opp-microvolt = <1350000 1350000 1705000>; + clock-latency-ns = <20>; + }; + opp@520000000 { + opp-hz = /bits/ 64 <520000000>; + opp-microvolt = <1450000 1450000 1705000>; + clock-latency-ns = <20>; + }; + opp@624000000 { + opp-hz = /bits/ 64 <624000000>; + opp-microvolt = <1550000 1550000 1705000>; + clock-latency-ns = <20>; + }; + }; }; diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi index 3ff077ca4400..e4ebcde17837 100644 --- a/arch/arm/boot/dts/pxa2xx.dtsi +++ b/arch/arm/boot/dts/pxa2xx.dtsi @@ -54,8 +54,8 @@ reg = <0x40e00000 0x10000>; gpio-controller; #gpio-cells = <0x2>; - interrupts = <10>; - interrupt-names = "gpio_mux"; + interrupts = <8>, <9>, <10>; + interrupt-names = "gpio0", "gpio1", "gpio_mux"; interrupt-controller; #interrupt-cells = <0x2>; ranges; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi index 9d6f3aacedb7..7a0cc4ea819a 100644 --- a/arch/arm/boot/dts/pxa3xx.dtsi +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -138,6 +138,7 @@ reg = <0x40e10000 0xffff>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x7>; }; diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index 6c0038398ef2..39d9e6ddefed 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -51,6 +51,29 @@ regulator-boot-on; }; + /* GPIO controlled ethernet power regulator */ + dragon_veth: xc622a331mrg { + compatible = "regulator-fixed"; + regulator-name = "XC6222A331MR-G"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vph>; + gpio = <&pm8058_gpio 40 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_veth_gpios>; + regulator-always-on; + }; + + /* VDDvario fixed regulator */ + dragon_vario: nds332p { + compatible = "regulator-fixed"; + regulator-name = "NDS332P"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&pm8058_s3>; + }; + /* This is a levelshifter for SDCC5 */ dragon_vio_txb: txb0104rgyr { compatible = "regulator-fixed"; @@ -167,6 +190,44 @@ bias-pull-up; }; }; + + dragon_ebi2_pins: ebi2 { + /* + * Pins used by EBI2 on the Dragonboard, actually only + * CS2 is used by a real peripheral. CS0 is just + * routed to a test point. + */ + mux0 { + pins = + /* "gpio39", CS1A_N this is not good to mux */ + "gpio40", /* CS2A_N */ + "gpio134"; /* CS0_N testpoint TP29 */ + function = "ebi2cs"; + }; + mux1 { + pins = + /* EBI2_ADDR_7 downto EBI2_ADDR_0 address bus */ + "gpio123", "gpio124", "gpio125", "gpio126", + "gpio127", "gpio128", "gpio129", "gpio130", + /* EBI2_DATA_15 downto EBI2_DATA_0 data bus */ + "gpio135", "gpio136", "gpio137", "gpio138", + "gpio139", "gpio140", "gpio141", "gpio142", + "gpio143", "gpio144", "gpio145", "gpio146", + "gpio147", "gpio148", "gpio149", "gpio150", + "gpio151", /* EBI2_OE_N */ + "gpio153", /* EBI2_ADV */ + "gpio157"; /* EBI2_WE_N */ + function = "ebi2"; + }; + }; + + /* Interrupt line for the KXSD9 accelerometer */ + dragon_kxsd9_gpios: kxsd9 { + irq { + pins = "gpio57"; /* IRQ line */ + bias-pull-up; + }; + }; }; qcom,ssbi@500000 { @@ -201,6 +262,15 @@ }; gpio@150 { + dragon_ethernet_gpios: ethernet-gpios { + pinconf { + pins = "gpio7"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + }; dragon_bmp085_gpios: bmp085-gpios { pinconf { pins = "gpio16"; @@ -210,6 +280,15 @@ power-source = <PM8058_GPIO_S3>; }; }; + dragon_mpu3050_gpios: mpu3050-gpios { + pinconf { + pins = "gpio17"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + }; dragon_sdcc3_gpios: sdcc3-gpios { pinconf { pins = "gpio22"; @@ -238,6 +317,14 @@ power-source = <PM8058_GPIO_S3>; }; }; + dragon_veth_gpios: veth-gpios { + pinconf { + pins = "gpio40"; + function = "normal"; + bias-disable; + drive-push-pull; + }; + }; }; led@48 { @@ -299,8 +386,8 @@ ak8975@0c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; - /* GPIO33 has interrupt 224 on the PM8058 */ - interrupt-parent = <&pm8058_gpio>; + /* FIXME: GPIO33 has interrupt 224 on the PM8058 */ + interrupt-parent = <&pm8058>; interrupts = <224 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&dragon_ak8975_gpios>; @@ -310,8 +397,8 @@ bmp085@77 { compatible = "bosch,bmp085"; reg = <0x77>; - /* GPIO16 has interrupt 207 on the PM8058 */ - interrupt-parent = <&pm8058_gpio>; + /* FIXME: GPIO16 has interrupt 207 on the PM8058 */ + interrupt-parent = <&pm8058>; interrupts = <207 IRQ_TYPE_EDGE_RISING>; reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -319,6 +406,90 @@ vddd-supply = <&pm8058_lvs0>; // 1.8V vdda-supply = <&pm8058_l14>; // 2.85V }; + mpu3050@68 { + compatible = "invensense,mpu3050"; + reg = <0x68>; + /* + * GPIO17 has interrupt 208 on the + * PM8058, it is pulled high by a 10k + * resistor to VLOGIC so needs to be + * active low/falling edge. + */ + interrupts-extended = <&pm8058 208 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_mpu3050_gpios>; + vlogic-supply = <&pm8058_lvs0>; // 1.8V + vdd-supply = <&pm8058_l14>; // 2.85V + + /* + * The MPU-3050 acts as a hub for the + * accelerometer. + */ + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + + kxsd9@18 { + compatible = "kionix,kxsd9"; + reg = <0x18>; + interrupt-parent = <&tlmm>; + interrupts = <57 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_kxsd9_gpios>; + iovdd-supply = <&pm8058_lvs0>; // 1.8V + vdd-supply = <&pm8058_l14>; // 2.85V + }; + }; + }; + }; + }; + + external-bus@1a100000 { + /* The EBI2 will instantiate first, then populate its children */ + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_ebi2_pins>; + + /* + * An on-board SMSC LAN9221 chip for "debug ethernet", + * which is actually just an ordinary ethernet on the + * EBI2. This has a 25MHz chrystal next to it, so no + * clocking is needed. + */ + ethernet-ebi2@2,0 { + compatible = "smsc,lan9221", "smsc,lan9115"; + reg = <2 0x0 0x100>; + /* + * GPIO7 has interrupt 198 on the PM8058 + * The second interrupt is the PME interrupt + * for network wakeup, connected to the TLMM. + */ + interrupts-extended = <&pm8058 198 IRQ_TYPE_EDGE_FALLING>, + <&tlmm 29 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; + vdd33a-supply = <&dragon_veth>; + vddvario-supply = <&dragon_vario>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_ethernet_gpios>; + phy-mode = "mii"; + reg-io-width = <2>; + smsc,force-external-phy; + /* IRQ on edge falling = active low */ + smsc,irq-active-low; + smsc,irq-push-pull; + + /* + * SLOW chipselect config + * Delay 9 cycles (140ns@64MHz) between SMSC + * LAN9221 Ethernet controller reads and writes + * on CS2. + */ + qcom,xmem-recovery-cycles = <0>; + qcom,xmem-write-hold-cycles = <3>; + qcom,xmem-write-delta-cycles = <31>; + qcom,xmem-read-delta-cycles = <28>; + qcom,xmem-write-wait-cycles = <9>; + qcom,xmem-read-wait-cycles = <9>; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts index 39ae2bc8cb08..8f5de029bca9 100644 --- a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts +++ b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts @@ -39,6 +39,17 @@ }; + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; + soc { rpm@108000 { regulators { @@ -74,6 +85,14 @@ bias-pull-down; }; + s2 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + regulator-always-on; + }; + s3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1400000>; @@ -121,6 +140,16 @@ bias-pull-down; }; + /** + * 1.8v required on LS expansion + * for mezzanine boards + */ + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + l23 { regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; @@ -347,5 +376,45 @@ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_HIGH>; }; }; + + riva-pil@3204000 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>; + }; + + hdmi-tx@4a00000 { + status = "okay"; + core-vdda-supply = <&pm8921_hdmi_switch>; + hdmi-mux-supply = <&vcc3v3>; + + hpd-gpio = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + + hdmi-phy@4a00400 { + status = "okay"; + core-vdda-supply = <&pm8921_hdmi_switch>; + }; + + mdp@5100000 { + status = "okay"; + + ports { + port@3 { + endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts index b72e09506448..e39440a86739 100644 --- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts +++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts @@ -15,6 +15,20 @@ stdout-path = "serial0:115200n8"; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ramoops@88d00000{ + compatible = "ramoops"; + reg = <0x88d00000 0x100000>; + record-size = <0x00020000>; + console-size = <0x00020000>; + ftrace-size = <0x00020000>; + }; + }; + ext_3p3v: regulator-fixed@1 { compatible = "regulator-fixed"; regulator-min-microvolt = <3300000>; @@ -99,6 +113,7 @@ l2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; + regulator-always-on; }; /* msm_otg-HSUSB_3p3 */ @@ -133,13 +148,14 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; bias-pull-down; + regulator-always-on; }; /* pwm_power for backlight */ l17 { regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3600000>; - bias-pull-down; + regulator-max-microvolt = <3000000>; + regulator-always-on; }; /* camera, qdsp6 */ @@ -184,6 +200,63 @@ }; }; + mdp@5100000 { + status = "okay"; + ports { + port@1 { + mdp_dsi1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi0: mdss_dsi@4700000 { + status = "okay"; + vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/ + vdd-supply = <&pm8921_l8>; + vddio-supply = <&pm8921_lvs7>; + avdd-supply = <&pm8921_l11>; + vcss-supply = <&ext_3p3v>; + + panel@0 { + reg = <0>; + compatible = "jdi,lt070me05000"; + + vddp-supply = <&pm8921_l17>; + iovcc-supply = <&pm8921_lvs7>; + + enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>; + dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + ports { + port@0 { + dsi0_in: endpoint { + remote-endpoint = <&mdp_dsi1_out>; + }; + }; + + port@1 { + dsi0_out: endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; + }; + + dsi-phy@4700200 { + status = "okay"; + vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/ + }; + gsbi@16200000 { status = "okay"; qcom,mode = <GSBI_PROT_I2C>; diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 2eeb0904eaa7..881ce707311a 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -43,6 +43,17 @@ }; }; + hdmi-out { + compatible = "hdmi-connector"; + type = "d"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; + soc { pinctrl@800000 { card_detect: card_detect { @@ -329,5 +340,46 @@ mmc-pwrseq = <&sdcc4_pwrseq>; }; }; + + hdmi-tx@4a00000 { + status = "okay"; + + core-vdda-supply = <&pm8921_hdmi_switch>; + hdmi-mux-supply = <&ext_3p3v>; + + hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>; + + ports { + port@0 { + endpoint { + remote-endpoint = <&mdp_dtv_out>; + }; + }; + + port@1 { + endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + + hdmi-phy@4a00400 { + status = "okay"; + + core-vdda-supply = <&pm8921_hdmi_switch>; + }; + + mdp@5100000 { + status = "okay"; + + ports { + port@3 { + endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi index 6b801e7e57a2..173ab7c299ce 100644 --- a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi @@ -284,4 +284,41 @@ bias-disable = <0>; }; }; + + riva_fm_pin_a: riva-fm-active { + pins = "gpio14", "gpio15"; + function = "riva_fm"; + }; + + riva_bt_pin_a: riva-bt-active { + pins = "gpio16", "gpio17"; + function = "riva_bt"; + }; + + riva_wlan_pin_a: riva-wlan-active { + pins = "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; + function = "riva_wlan"; + + drive-strength = <6>; + bias-pull-down; + }; + + hdmi_pinctrl: hdmi-pinctrl { + mux { + pins = "gpio70", "gpio71", "gpio72"; + function = "hdmi"; + }; + + pinconf_ddc { + pins = "gpio70", "gpio71"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf_hpd { + pins = "gpio72"; + bias-pull-down; + drive-strength = <16>; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts index ebd675ca94b4..a34ba3555454 100644 --- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts +++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts @@ -390,5 +390,12 @@ pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>; }; }; + + riva-pil@3204000 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 1dbe697b2e90..14a6f5ed02de 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/clock/qcom,gcc-msm8960.h> #include <dt-bindings/reset/qcom,gcc-msm8960.h> #include <dt-bindings/clock/qcom,mmcc-msm8960.h> +#include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/soc/qcom,gsbi.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -21,13 +22,18 @@ reg = <0x80000000 0x200000>; no-map; }; + + wcnss_mem: wcnss@8f000000 { + reg = <0x8f000000 0x700000>; + no-map; + }; }; cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + CPU0: cpu@0 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; @@ -38,7 +44,7 @@ cpu-idle-states = <&CPU_SPC>; }; - cpu@1 { + CPU1: cpu@1 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; @@ -49,7 +55,7 @@ cpu-idle-states = <&CPU_SPC>; }; - cpu@2 { + CPU2: cpu@2 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; @@ -60,7 +66,7 @@ cpu-idle-states = <&CPU_SPC>; }; - cpu@3 { + CPU3: cpu@3 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; @@ -179,7 +185,7 @@ }; clocks { - cxo_board { + cxo_board: cxo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; @@ -303,6 +309,9 @@ firmware { scm { compatible = "qcom,scm-apq8064"; + + clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>; + clock-names = "core"; }; }; @@ -627,6 +636,33 @@ clock-names = "core"; }; + ssbi@c00000 { + compatible = "qcom,ssbi"; + reg = <0x00c00000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + + pm8821: pmic@1 { + compatible = "qcom,pm8821"; + interrupt-parent = <&tlmm_pinmux>; + interrupts = <76 IRQ_TYPE_LEVEL_LOW>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pm8821_mpps: mpps@50 { + compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp"; + reg = <0x50>; + interrupts = <24 IRQ_TYPE_NONE>, + <25 IRQ_TYPE_NONE>, + <26 IRQ_TYPE_NONE>, + <27 IRQ_TYPE_NONE>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; + qcom,ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x00500000 0x1000>; @@ -1060,6 +1096,231 @@ reg = <0x1a400000 0x100>; }; + gpu: adreno-3xx@4300000 { + compatible = "qcom,adreno-3xx"; + reg = <0x04300000 0x20000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <GIC_SPI 80 0>; + interrupt-names = "kgsl_3d0_irq"; + clock-names = + "core_clk", + "iface_clk", + "mem_clk", + "mem_iface_clk"; + clocks = + <&mmcc GFX3D_CLK>, + <&mmcc GFX3D_AHB_CLK>, + <&mmcc GFX3D_AXI_CLK>, + <&mmcc MMSS_IMEM_AHB_CLK>; + qcom,chipid = <0x03020002>; + + iommus = <&gfx3d 0 + &gfx3d 1 + &gfx3d 2 + &gfx3d 3 + &gfx3d 4 + &gfx3d 5 + &gfx3d 6 + &gfx3d 7 + &gfx3d 8 + &gfx3d 9 + &gfx3d 10 + &gfx3d 11 + &gfx3d 12 + &gfx3d 13 + &gfx3d 14 + &gfx3d 15 + &gfx3d 16 + &gfx3d 17 + &gfx3d 18 + &gfx3d 19 + &gfx3d 20 + &gfx3d 21 + &gfx3d 22 + &gfx3d 23 + &gfx3d 24 + &gfx3d 25 + &gfx3d 26 + &gfx3d 27 + &gfx3d 28 + &gfx3d 29 + &gfx3d 30 + &gfx3d 31 + &gfx3d1 0 + &gfx3d1 1 + &gfx3d1 2 + &gfx3d1 3 + &gfx3d1 4 + &gfx3d1 5 + &gfx3d1 6 + &gfx3d1 7 + &gfx3d1 8 + &gfx3d1 9 + &gfx3d1 10 + &gfx3d1 11 + &gfx3d1 12 + &gfx3d1 13 + &gfx3d1 14 + &gfx3d1 15 + &gfx3d1 16 + &gfx3d1 17 + &gfx3d1 18 + &gfx3d1 19 + &gfx3d1 20 + &gfx3d1 21 + &gfx3d1 22 + &gfx3d1 23 + &gfx3d1 24 + &gfx3d1 25 + &gfx3d1 26 + &gfx3d1 27 + &gfx3d1 28 + &gfx3d1 29 + &gfx3d1 30 + &gfx3d1 31>; + + qcom,gpu-pwrlevels { + compatible = "qcom,gpu-pwrlevels"; + qcom,gpu-pwrlevel@0 { + qcom,gpu-freq = <450000000>; + }; + qcom,gpu-pwrlevel@1 { + qcom,gpu-freq = <27000000>; + }; + }; + }; + + mmss_sfpb: syscon@5700000 { + compatible = "syscon"; + reg = <0x5700000 0x70>; + }; + + dsi0: mdss_dsi@4700000 { + compatible = "qcom,mdss-dsi-ctrl"; + label = "MDSS DSI CTRL->0"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 82 0>; + reg = <0x04700000 0x200>; + reg-names = "dsi_ctrl"; + + clocks = <&mmcc DSI_M_AHB_CLK>, + <&mmcc DSI_S_AHB_CLK>, + <&mmcc AMP_AHB_CLK>, + <&mmcc DSI_CLK>, + <&mmcc DSI1_BYTE_CLK>, + <&mmcc DSI_PIXEL_CLK>, + <&mmcc DSI1_ESC_CLK>; + clock-names = "iface_clk", "bus_clk", "core_mmss_clk", + "src_clk", "byte_clk", "pixel_clk", + "core_clk"; + + assigned-clocks = <&mmcc DSI1_BYTE_SRC>, + <&mmcc DSI1_ESC_SRC>, + <&mmcc DSI_SRC>, + <&mmcc DSI_PIXEL_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, + <&dsi0_phy 0>, + <&dsi0_phy 1>, + <&dsi0_phy 1>; + syscon-sfpb = <&mmss_sfpb>; + phys = <&dsi0_phy>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + + dsi0_phy: dsi-phy@4700200 { + compatible = "qcom,dsi-phy-28nm-8960"; + #clock-cells = <1>; + + reg = <0x04700200 0x100>, + <0x04700300 0x200>, + <0x04700500 0x5c>; + reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator"; + clock-names = "iface_clk"; + clocks = <&mmcc DSI_M_AHB_CLK>; + }; + + + mdp_port0: iommu@7500000 { + compatible = "qcom,apq8064-iommu"; + #iommu-cells = <1>; + clock-names = + "smmu_pclk", + "iommu_clk"; + clocks = + <&mmcc SMMU_AHB_CLK>, + <&mmcc MDP_AXI_CLK>; + reg = <0x07500000 0x100000>; + interrupts = + <GIC_SPI 63 0>, + <GIC_SPI 64 0>; + qcom,ncb = <2>; + }; + + mdp_port1: iommu@7600000 { + compatible = "qcom,apq8064-iommu"; + #iommu-cells = <1>; + clock-names = + "smmu_pclk", + "iommu_clk"; + clocks = + <&mmcc SMMU_AHB_CLK>, + <&mmcc MDP_AXI_CLK>; + reg = <0x07600000 0x100000>; + interrupts = + <GIC_SPI 61 0>, + <GIC_SPI 62 0>; + qcom,ncb = <2>; + }; + + gfx3d: iommu@7c00000 { + compatible = "qcom,apq8064-iommu"; + #iommu-cells = <1>; + clock-names = + "smmu_pclk", + "iommu_clk"; + clocks = + <&mmcc SMMU_AHB_CLK>, + <&mmcc GFX3D_AXI_CLK>; + reg = <0x07c00000 0x100000>; + interrupts = + <GIC_SPI 69 0>, + <GIC_SPI 70 0>; + qcom,ncb = <3>; + }; + + gfx3d1: iommu@7d00000 { + compatible = "qcom,apq8064-iommu"; + #iommu-cells = <1>; + clock-names = + "smmu_pclk", + "iommu_clk"; + clocks = + <&mmcc SMMU_AHB_CLK>, + <&mmcc GFX3D_AXI_CLK>; + reg = <0x07d00000 0x100000>; + interrupts = + <GIC_SPI 210 0>, + <GIC_SPI 211 0>; + qcom,ncb = <3>; + }; + pcie: pci@1b500000 { compatible = "qcom,pcie-apq8064", "snps,dw-pcie"; reg = <0x1b500000 0x1000 @@ -1095,6 +1356,347 @@ reset-names = "axi", "ahb", "por", "pci", "phy"; status = "disabled"; }; + + hdmi: hdmi-tx@4a00000 { + compatible = "qcom,hdmi-tx-8960"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pinctrl>; + reg = <0x04a00000 0x2f0>; + reg-names = "core_physical"; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mmcc HDMI_APP_CLK>, + <&mmcc HDMI_M_AHB_CLK>, + <&mmcc HDMI_S_AHB_CLK>; + clock-names = "core_clk", + "master_iface_clk", + "slave_iface_clk"; + + phys = <&hdmi_phy>; + phy-names = "hdmi-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + hdmi_in: endpoint { + }; + }; + + port@1 { + reg = <1>; + hdmi_out: endpoint { + }; + }; + }; + }; + + hdmi_phy: hdmi-phy@4a00400 { + compatible = "qcom,hdmi-phy-8960"; + reg = <0x4a00400 0x60>, + <0x4a00500 0x100>; + reg-names = "hdmi_phy", + "hdmi_pll"; + + clocks = <&mmcc HDMI_S_AHB_CLK>; + clock-names = "slave_iface_clk"; + }; + + mdp: mdp@5100000 { + compatible = "qcom,mdp4"; + reg = <0x05100000 0xf0000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mmcc MDP_CLK>, + <&mmcc MDP_AHB_CLK>, + <&mmcc MDP_AXI_CLK>, + <&mmcc MDP_LUT_CLK>, + <&mmcc HDMI_TV_CLK>, + <&mmcc MDP_TV_CLK>; + clock-names = "core_clk", + "iface_clk", + "bus_clk", + "lut_clk", + "hdmi_clk", + "tv_clk"; + + iommus = <&mdp_port0 0 + &mdp_port0 2 + &mdp_port1 0 + &mdp_port1 2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp_lvds_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + mdp_dsi1_out: endpoint { + }; + }; + + port@2 { + reg = <2>; + mdp_dsi2_out: endpoint { + }; + }; + + port@3 { + reg = <3>; + mdp_dtv_out: endpoint { + }; + }; + }; + }; + + riva: riva-pil@3204000 { + compatible = "qcom,riva-pil"; + + reg = <0x03200800 0x1000>, <0x03202000 0x2000>, <0x03204000 0x100>; + reg-names = "ccu", "dxe", "pmu"; + + interrupts-extended = <&intc GIC_SPI 199 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smsm 6 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal"; + + memory-region = <&wcnss_mem>; + + vddcx-supply = <&pm8921_s3>; + vddmx-supply = <&pm8921_l24>; + vddpx-supply = <&pm8921_s4>; + + status = "disabled"; + + iris { + compatible = "qcom,wcn3660"; + + clocks = <&cxo_board>; + clock-names = "xo"; + + vddxo-supply = <&pm8921_l4>; + vddrfa-supply = <&pm8921_s2>; + vddpa-supply = <&pm8921_l10>; + vdddig-supply = <&pm8921_lvs2>; + }; + + smd-edge { + interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&l2cc 8 25>; + qcom,smd-edge = <6>; + + label = "riva"; + + wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&riva>; + + bt { + compatible = "qcom,wcnss-bt"; + }; + + wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", "tx-rings-empty"; + }; + }; + }; + }; + + etb@1a01000 { + compatible = "coresight-etb10", "arm,primecell"; + reg = <0x1a01000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + port { + etb_in: endpoint { + slave-mode; + remote-endpoint = <&replicator_out0>; + }; + }; + }; + + tpiu@1a03000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0x1a03000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + port { + tpiu_in: endpoint { + slave-mode; + remote-endpoint = <&replicator_out1>; + }; + }; + }; + + replicator { + compatible = "arm,coresight-replicator"; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = <&etb_in>; + }; + }; + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = <&tpiu_in>; + }; + }; + port@2 { + reg = <0>; + replicator_in: endpoint { + slave-mode; + remote-endpoint = <&funnel_out>; + }; + }; + }; + }; + + funnel@1a04000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0x1a04000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* + * Not described input ports: + * 2 - connected to STM component + * 3 - not-connected + * 6 - not-connected + * 7 - not-connected + */ + port@0 { + reg = <0>; + funnel_in0: endpoint { + slave-mode; + remote-endpoint = <&etm0_out>; + }; + }; + port@1 { + reg = <1>; + funnel_in1: endpoint { + slave-mode; + remote-endpoint = <&etm1_out>; + }; + }; + port@4 { + reg = <4>; + funnel_in4: endpoint { + slave-mode; + remote-endpoint = <&etm2_out>; + }; + }; + port@5 { + reg = <5>; + funnel_in5: endpoint { + slave-mode; + remote-endpoint = <&etm3_out>; + }; + }; + port@8 { + reg = <0>; + funnel_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; + }; + + etm@1a1c000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x1a1c000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU0>; + + port { + etm0_out: endpoint { + remote-endpoint = <&funnel_in0>; + }; + }; + }; + + etm@1a1d000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x1a1d000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU1>; + + port { + etm1_out: endpoint { + remote-endpoint = <&funnel_in1>; + }; + }; + }; + + etm@1a1e000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x1a1e000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU2>; + + port { + etm2_out: endpoint { + remote-endpoint = <&funnel_in4>; + }; + }; + }; + + etm@1a1f000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x1a1f000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU3>; + + port { + etm3_out: endpoint { + remote-endpoint = <&funnel_in5>; + }; + }; + }; }; }; #include "qcom-apq8064-pins.dtsi" diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 39eb7a4ed16a..80d48867107f 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -182,13 +182,13 @@ }; clocks { - xo_board { + xo_board: xo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; }; - sleep_clk { + sleep_clk: sleep_clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; @@ -416,8 +416,10 @@ reg-names = "hc_mem", "core_mem"; interrupts = <0 123 0>, <0 138 0>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; - clock-names = "core", "iface"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; status = "disabled"; }; @@ -427,8 +429,10 @@ reg-names = "hc_mem", "core_mem"; interrupts = <0 125 0>, <0 221 0>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>; - clock-names = "core", "iface"; + clocks = <&gcc GCC_SDCC2_APPS_CLK>, + <&gcc GCC_SDCC2_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 2e375576ffd0..76f4e8921d58 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -65,13 +65,13 @@ cxo_board { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <19200000>; + clock-frequency = <25000000>; }; pxo_board { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <27000000>; + clock-frequency = <25000000>; }; sleep_clk: sleep_clk { diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts new file mode 100644 index 000000000000..26160c324802 --- /dev/null +++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts @@ -0,0 +1,281 @@ +/* + * Device Tree Source for mangOH Green Board with WP8548 Module + * + * Copyright (C) 2016 BayLibre, SAS. + * Author : Neil Armstrong <narmstrong@baylibre.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/input/input.h> + +#include "qcom-mdm9615-wp8548.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "MangOH Green with WP8548 Module"; + compatible = "swir,mangoh-green-wp8548", "swir,wp8548", "qcom,mdm9615"; + + aliases { + spi0 = &gsbi3_spi; + serial0 = &gsbi4_serial; + serial1 = &gsbi5_serial; + i2c0 = &gsbi5_i2c; + mmc0 = &sdcc1; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; +}; + +&msmgpio { + /* MangOH GPIO Mapping : + * - 2 : GPIOEXP_INT2 + * - 7 : IOT1_GPIO2 + * - 8 : IOT0_GPIO4 + * - 13: IOT0_GPIO3 + * - 21: IOT1_GPIO4 + * - 22: IOT2_GPIO1 + * - 23: IOT2_GPIO2 + * - 24: IOT2_GPIO3 + * - 25: IOT1_GPIO1 + * - 32: IOT1_GPIO3 + * - 33: IOT0_GPIO2 + * - 42: IOT0_GPIO1 and SD Card Detect + */ + + gpioext1_pins: gpioext1_pins { + pins { + pins = "gpio2"; + function = "gpio"; + input-enable; + bias-disable; + }; + }; + + sdc_cd_pins: sdc_cd_pins { + pins { + pins = "gpio42"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; +}; + +&gsbi3_spi { + spi@0 { + compatible = "swir,mangoh-iotport-spi", "spidev"; + spi-max-frequency = <24000000>; + reg = <0>; + }; +}; + +&gsbi5_i2c { + mux@71 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + + i2c_iot0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c_iot1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c_iot2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + usbhub: hub@8 { + compatible = "smsc,usb3503a"; + reg = <0x8>; + connect-gpios = <&gpioext2 1 GPIO_ACTIVE_HIGH>; + intn-gpios = <&gpioext2 0 GPIO_ACTIVE_LOW>; + initial-mode = <1>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + gpioext0: gpio@3e { + /* GPIO Expander 0 Mapping : + * - 0: ARDUINO_RESET_Level shift + * - 1: BattChrgr_PG_N + * - 2: BattGauge_GPIO + * - 3: LED_ON (out active high) + * - 4: ATmega_reset_GPIO + * - 5: X + * - 6: PCM_ANALOG_SELECT (out active high) + * - 7: X + * - 8: Board_rev_res1 (in) + * - 9: Board_rev_res2 (in) + * - 10: UART_EXP1_ENn (out active low / pull-down) + * - 11: UART_EXP1_IN (out pull-down) + * - 12: UART_EXP2_IN (out pull-down) + * - 13: SDIO_SEL (out pull-down) + * - 14: SPI_EXP1_ENn (out active low / pull-down) + * - 15: SPI_EXP1_IN (out pull-down) + */ + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "semtech,sx1509q"; + reg = <0x3e>; + interrupt-parent = <&gpioext1>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + + probe-reset; + + gpio-controller; + interrupt-controller; + }; + }; + + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + + gpioext1: gpio@3f { + /* GPIO Expander 1 Mapping : + * - 0: GPIOEXP_INT1 + * - 1: Battery detect + * - 2: GPIO_SCF3_RESET + * - 3: LED_CARD_DETECT_IOT0 (in) + * - 4: LED_CARD_DETECT_IOT1 (in) + * - 5: LED_CARD_DETECT_IOT2 (in) + * - 6: UIM2_PWM_SELECT + * - 7: UIM2_M2_S_SELECT + * - 8: TP900 + * - 9: SENSOR_INT1 (in) + * - 10: SENSOR_INT2 (in) + * - 11: CARD_DETECT_IOT0 (in pull-up) + * - 12: CARD_DETECT_IOT2 (in pull-up) + * - 13: CARD_DETECT_IOT1 (in pull-up) + * - 14: GPIOEXP_INT3 (in active low / pull-up) + * - 15: BattChrgr_INT_N + */ + pinctrl-0 = <&gpioext1_pins>; + pinctrl-names = "default"; + + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "semtech,sx1509q"; + reg = <0x3f>; + interrupt-parent = <&msmgpio>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + + probe-reset; + + gpio-controller; + interrupt-controller; + }; + }; + + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + + gpioext2: gpio@70 { + /* GPIO Expander 2 Mapping : + * - 0: USB_HUB_INTn + * - 1: HUB_CONNECT + * - 2: GPIO_IOT2_RESET (out active low / pull-up) + * - 3: GPIO_IOT1_RESET (out active low / pull-up) + * - 4: GPIO_IOT0_RESET (out active low / pull-up) + * - 5: TP901 + * - 6: TP902 + * - 7: TP903 + * - 8: UART_EXP2_ENn (out active low / pull-down) + * - 9: PCM_EXP1_ENn (out active low) + * - 10: PCM_EXP1_SEL (out) + * - 11: ARD_FTDI + * - 12: TP904 + * - 13: TP905 + * - 14: TP906 + * - 15: RS232_Enable (out active high / pull-up) + */ + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "semtech,sx1509q"; + reg = <0x70>; + interrupt-parent = <&gpioext1>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>; + + probe-reset; + + gpio-controller; + interrupt-controller; + }; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&sdcc1 { + pinctrl-0 = <&sdc_cd_pins>; + pinctrl-names = "default"; + disable-wp; + cd-gpios = <&msmgpio 42 GPIO_ACTIVE_LOW>; /* Active low CD */ +}; diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi new file mode 100644 index 000000000000..7869898e392d --- /dev/null +++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi @@ -0,0 +1,170 @@ +/* + * Device Tree Source for Sierra Wireless WP8548 Module + * + * Copyright (C) 2016 BayLibre, SAS. + * Author : Neil Armstrong <narmstrong@baylibre.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "qcom-mdm9615.dtsi" + +/ { + model = "Sierra Wireless WP8548 Module"; + compatible = "swir,wp8548", "qcom,mdm9615"; + + memory { + reg = <0x48000000 0x7F00000>; + }; +}; + +&msmgpio { + pinctrl-0 = <&reset_out_pins>; + pinctrl-names = "default"; + + gsbi3_pins: gsbi3_pins { + mux { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "gsbi3"; + drive-strength = <8>; + bias-disable; + }; + }; + + gsbi4_pins: gsbi4_pins { + mux { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + function = "gsbi4"; + drive-strength = <8>; + bias-disable; + }; + }; + + gsbi5_i2c_pins: gsbi5_i2c_pins { + pin16 { + pins = "gpio16"; + function = "gsbi5_i2c"; + drive-strength = <8>; + bias-disable; + }; + + pin17 { + pins = "gpio17"; + function = "gsbi5_i2c"; + drive-strength = <2>; + bias-disable; + }; + }; + + gsbi5_uart_pins: gsbi5_uart_pins { + mux { + pins = "gpio18", "gpio19"; + function = "gsbi5_uart"; + drive-strength = <8>; + bias-disable; + }; + }; + + reset_out_pins: reset_out_pins { + pins { + pins = "gpio66"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + output-high; + }; + }; +}; + +&pmicgpio { + usb_vbus_5v_pins: usb_vbus_5v_pins { + pins = "gpio4"; + function = "normal"; + output-high; + bias-disable; + qcom,drive-strength = <1>; + power-source = <2>; + }; +}; + +&gsbi3 { + status = "ok"; + qcom,mode = <GSBI_PROT_SPI>; +}; + +&gsbi3_spi { + status = "ok"; + pinctrl-0 = <&gsbi3_pins>; + pinctrl-names = "default"; + assigned-clocks = <&gcc GSBI3_QUP_CLK>; + assigned-clock-rates = <24000000>; +}; + +&gsbi4 { + status = "ok"; + qcom,mode = <GSBI_PROT_UART_W_FC>; +}; + +&gsbi4_serial { + status = "ok"; + pinctrl-0 = <&gsbi4_pins>; + pinctrl-names = "default"; +}; + +&gsbi5 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; +}; + +&gsbi5_i2c { + status = "ok"; + clock-frequency = <200000>; + pinctrl-0 = <&gsbi5_i2c_pins>; + pinctrl-names = "default"; +}; + +&gsbi5_serial { + status = "ok"; + pinctrl-0 = <&gsbi5_uart_pins>; + pinctrl-names = "default"; +}; + +&sdcc1 { + status = "ok"; +}; diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi new file mode 100644 index 000000000000..c852b69229c9 --- /dev/null +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -0,0 +1,557 @@ +/* + * Device Tree Source for Qualcomm MDM9615 SoC + * + * Copyright (C) 2016 BayLibre, SAS. + * Author : Neil Armstrong <narmstrong@baylibre.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +/include/ "skeleton.dtsi" + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-mdm9615.h> +#include <dt-bindings/reset/qcom,gcc-mdm9615.h> +#include <dt-bindings/mfd/qcom-rpm.h> +#include <dt-bindings/soc/qcom,gsbi.h> + +/ { + model = "Qualcomm MDM9615"; + compatible = "qcom,mdm9615"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a5"; + device_type = "cpu"; + next-level-cache = <&L2>; + }; + }; + + cpu-pmu { + compatible = "arm,cortex-a5-pmu"; + interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + clocks { + cxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + }; + + regulators { + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + L2: l2-cache@2040000 { + compatible = "arm,pl310-cache"; + reg = <0x02040000 0x1000>; + arm,data-latency = <2 2 0>; + cache-unified; + cache-level = <2>; + }; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x02000000 0x1000>, + <0x02002000 0x1000>; + }; + + timer@200a000 { + compatible = "qcom,kpss-timer", "qcom,msm-timer"; + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>; + reg = <0x0200a000 0x100>; + clock-frequency = <27000000>, + <32768>; + cpu-offset = <0x80000>; + }; + + msmgpio: pinctrl@800000 { + compatible = "qcom,mdm9615-pinctrl"; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x800000 0x4000>; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-mdm9615"; + #clock-cells = <1>; + #reset-cells = <1>; + reg = <0x900000 0x4000>; + }; + + lcc: clock-controller@28000000 { + compatible = "qcom,lcc-mdm9615"; + reg = <0x28000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + l2cc: clock-controller@2011000 { + compatible = "syscon"; + reg = <0x02011000 0x1000>; + }; + + rng@1a500000 { + compatible = "qcom,prng"; + reg = <0x1a500000 0x200>; + clocks = <&gcc PRNG_CLK>; + clock-names = "core"; + assigned-clocks = <&gcc PRNG_CLK>; + assigned-clock-rates = <32000000>; + }; + + gsbi2: gsbi@16100000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <2>; + reg = <0x16100000 0x100>; + clocks = <&gcc GSBI2_H_CLK>; + clock-names = "iface"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gsbi2_i2c: i2c@16180000 { + compatible = "qcom,i2c-qup-v1.1.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x16180000 0x1000>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + gsbi3: gsbi@16200000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <3>; + reg = <0x16200000 0x100>; + clocks = <&gcc GSBI3_H_CLK>; + clock-names = "iface"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gsbi3_spi: spi@16280000 { + compatible = "qcom,spi-qup-v1.1.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x16280000 0x1000>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <24000000>; + + clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + gsbi4: gsbi@16300000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <4>; + reg = <0x16300000 0x100>; + clocks = <&gcc GSBI4_H_CLK>; + clock-names = "iface"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + gsbi4_serial: serial@16340000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16340000 0x1000>, + <0x16300000 0x1000>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + gsbi5: gsbi@16400000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <5>; + reg = <0x16400000 0x100>; + clocks = <&gcc GSBI5_H_CLK>; + clock-names = "iface"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + gsbi5_i2c: i2c@16480000 { + compatible = "qcom,i2c-qup-v1.1.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x16480000 0x1000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + + /* QUP clock is not initialized, set rate */ + assigned-clocks = <&gcc GSBI5_QUP_CLK>; + assigned-clock-rates = <24000000>; + + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + gsbi5_serial: serial@16440000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16440000 0x1000>, + <0x16400000 0x1000>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + + pmicintc: pmic@0 { + compatible = "qcom,pm8018", "qcom,pm8921"; + interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@1c { + compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey"; + reg = <0x1c>; + interrupt-parent = <&pmicintc>; + interrupts = <50 IRQ_TYPE_EDGE_RISING>, + <51 IRQ_TYPE_EDGE_RISING>; + debounce = <15625>; + pull-up; + }; + + pmicmpp: mpp@50 { + compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp"; + interrupt-parent = <&pmicintc>; + interrupts = <24 IRQ_TYPE_NONE>, + <25 IRQ_TYPE_NONE>, + <26 IRQ_TYPE_NONE>, + <27 IRQ_TYPE_NONE>, + <28 IRQ_TYPE_NONE>, + <29 IRQ_TYPE_NONE>; + reg = <0x50>; + gpio-controller; + #gpio-cells = <2>; + }; + + rtc@11d { + compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc"; + interrupt-parent = <&pmicintc>; + interrupts = <39 IRQ_TYPE_EDGE_RISING>; + reg = <0x11d>; + allow-set-time; + }; + + pmicgpio: gpio@150 { + compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio"; + interrupt-parent = <&pmicintc>; + interrupts = <24 IRQ_TYPE_NONE>, + <25 IRQ_TYPE_NONE>, + <26 IRQ_TYPE_NONE>, + <27 IRQ_TYPE_NONE>, + <28 IRQ_TYPE_NONE>, + <29 IRQ_TYPE_NONE>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; + + sdcc1bam: dma@12182000{ + compatible = "qcom,bam-v1.3.0"; + reg = <0x12182000 0x8000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC1_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + sdcc2bam: dma@12142000{ + compatible = "qcom,bam-v1.3.0"; + reg = <0x12142000 0x8000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC2_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + amba { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sdcc1: sdcc@12180000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12180000 0x2000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <48000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; + dma-names = "tx", "rx"; + assigned-clocks = <&gcc SDC1_CLK>; + assigned-clock-rates = <400000>; + }; + + sdcc2: sdcc@12140000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12140000 0x2000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <48000000>; + no-1-8-v; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc2bam 2>, <&sdcc2bam 1>; + dma-names = "tx", "rx"; + assigned-clocks = <&gcc SDC2_CLK>; + assigned-clock-rates = <400000>; + }; + }; + + tcsr: syscon@1a400000 { + compatible = "qcom,tcsr-mdm9615", "syscon"; + reg = <0x1a400000 0x100>; + }; + + rpm: rpm@108000 { + compatible = "qcom,rpm-mdm9615"; + reg = <0x108000 0x1000>; + + qcom,ipc = <&l2cc 0x8 2>; + + interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ack", "err", "wakeup"; + + regulators { + compatible = "qcom,rpm-pm8018-regulators"; + + vin_lvs1-supply = <&pm8018_s3>; + + vdd_l7-supply = <&pm8018_s4>; + vdd_l8-supply = <&pm8018_s3>; + vdd_l9_l10_l11_l12-supply = <&pm8018_s5>; + + /* Buck SMPS */ + pm8018_s1: s1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8018_s2: s2 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8018_s3: s3 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8018_s4: s4 { + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2200000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8018_s5: s5 { + regulator-always-on; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + /* PMOS LDO */ + pm8018_l2: l2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8018_l3: l3 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8018_l4: l4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + pm8018_l5: l5 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + pm8018_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + pm8018_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + + pm8018_l8: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8018_l9: l9 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1150000>; + bias-pull-down; + }; + + pm8018_l10: l10 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8018_l11: l11 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8018_l12: l12 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8018_l13: l13 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8018_l14: l14 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + /* Low Voltage Switch */ + pm8018_lvs1: lvs1 { + bias-pull-down; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index 23de764558ab..1adc04978a47 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -48,7 +48,7 @@ }; }; -&pmicintc { +&pm8058 { keypad@148 { linux,keymap = < MATRIX_KEY(0, 0, KEY_FN_F1) diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 8c65e0d82559..91c9a62ae725 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -141,12 +141,29 @@ }; }; + external-bus@1a100000 { + compatible = "qcom,msm8660-ebi2"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0x0 0x1a800000 0x00800000>, + <1 0x0 0x1b000000 0x00800000>, + <2 0x0 0x1b800000 0x00800000>, + <3 0x0 0x1d000000 0x08000000>, + <4 0x0 0x1c800000 0x00800000>, + <5 0x0 0x1c000000 0x00800000>; + reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>; + reg-names = "ebi2", "xmem"; + clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>; + clock-names = "ebi2x", "ebi2"; + status = "disabled"; + }; + qcom,ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; - pmicintc: pmic@0 { + pm8058: pmic@0 { compatible = "qcom,pm8058"; interrupt-parent = <&tlmm>; interrupts = <88 8>; @@ -159,7 +176,7 @@ compatible = "qcom,pm8058-gpio", "qcom,ssbi-gpio"; reg = <0x150>; - interrupt-parent = <&pmicintc>; + interrupt-parent = <&pm8058>; interrupts = <192 IRQ_TYPE_NONE>, <193 IRQ_TYPE_NONE>, <194 IRQ_TYPE_NONE>, @@ -215,7 +232,7 @@ reg = <0x50>; gpio-controller; #gpio-cells = <2>; - interrupt-parent = <&pmicintc>; + interrupt-parent = <&pm8058>; interrupts = <128 IRQ_TYPE_NONE>, <129 IRQ_TYPE_NONE>, @@ -234,7 +251,7 @@ pwrkey@1c { compatible = "qcom,pm8058-pwrkey"; reg = <0x1c>; - interrupt-parent = <&pmicintc>; + interrupt-parent = <&pm8058>; interrupts = <50 1>, <51 1>; debounce = <15625>; pull-up; @@ -243,7 +260,7 @@ keypad@148 { compatible = "qcom,pm8058-keypad"; reg = <0x148>; - interrupt-parent = <&pmicintc>; + interrupt-parent = <&pm8058>; interrupts = <74 1>, <75 1>; debounce = <15>; scan-delay = <32>; @@ -253,7 +270,7 @@ rtc@1e8 { compatible = "qcom,pm8058-rtc"; reg = <0x1e8>; - interrupt-parent = <&pmicintc>; + interrupt-parent = <&pm8058>; interrupts = <39 1>; allow-set-time; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index c0fb4a698c56..382bcc3231a9 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -224,6 +224,35 @@ status = "ok"; }; + pinctrl@fd510000 { + sdhc1_pin_a: sdhc1-pin-active { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + }; + + sdhci@f9824900 { + status = "ok"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + bus-width = <8>; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc1_pin_a>; + }; + gpio-keys { compatible = "gpio-keys"; input-name = "gpio-keys"; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index e7c1577d56f4..96c853bab8ba 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -413,6 +413,14 @@ dma-controller@f9944000 { qcom,controlled-remotely; }; + + usb-phy@f9a55000 { + status = "ok"; + }; + + usb@f9a55000 { + status = "ok"; + }; }; &spmi_bus { diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index d2109475bdfd..d3e1a61b8671 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/reset/qcom,gcc-msm8974.h> #include "skeleton.dtsi" / { @@ -30,7 +31,7 @@ no-map; }; - adsp@0dc00000 { + adsp_region: adsp@0dc00000 { reg = <0x0dc00000 0x1900000>; no-map; }; @@ -59,11 +60,6 @@ reg = <0x0fd80000 0x180000>; no-map; }; - - unused@0ff00000 { - reg = <0x0ff00000 0x10100000>; - no-map; - }; }; cpus { @@ -220,13 +216,13 @@ }; clocks { - xo_board { + xo_board: xo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; }; - sleep_clk { + sleep_clk: sleep_clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; @@ -242,6 +238,24 @@ clock-frequency = <19200000>; }; + adsp-pil { + compatible = "qcom,msm8974-adsp-pil"; + + interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + cx-supply = <&pm8841_s2>; + + memory-region = <&adsp_region>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + }; + smem { compatible = "qcom,smem"; @@ -251,6 +265,31 @@ hwlocks = <&tcsr_mutex 3>; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupt-parent = <&intc>; + interrupts = <0 158 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + smp2p-modem { compatible = "qcom,smp2p"; qcom,smem = <435>, <428>; @@ -558,8 +597,10 @@ reg-names = "hc_mem", "core_mem"; interrupts = <0 123 0>, <0 138 0>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; - clock-names = "core", "iface"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; status = "disabled"; }; @@ -569,8 +610,10 @@ reg-names = "hc_mem", "core_mem"; interrupts = <0 125 0>, <0 221 0>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>; - clock-names = "core", "iface"; + clocks = <&gcc GCC_SDCC2_APPS_CLK>, + <&gcc GCC_SDCC2_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; status = "disabled"; }; @@ -651,11 +694,56 @@ #dma-cells = <1>; qcom,ee = <0>; }; + + usb1_phy: usb-phy@f9a55000 { + compatible = "qcom,usb-otg-snps"; + + reg = <0xf9a55000 0x400>; + interrupts-extended = <&intc 0 134 0>, <&intc 0 140 0>, + <&spmi_bus 0 0x9 0 0>; + interrupt-names = "core_irq", "async_irq", "pmic_id_irq"; + + vddcx-supply = <&pm8841_s2>; + v3p3-supply = <&pm8941_l24>; + v1p8-supply = <&pm8941_l6>; + + dr_mode = "otg"; + qcom,phy-init-sequence = <0x63 0x81 0xfffffff>; + qcom,otg-control = <1>; + qcom,phy-num = <0>; + + resets = <&gcc GCC_USB2A_PHY_BCR>, <&gcc GCC_USB_HS_BCR>; + reset-names = "phy", "link"; + + clocks = <&gcc GCC_XO_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>, + <&gcc GCC_USB_HS_AHB_CLK>; + clock-names = "phy", "core", "iface"; + + status = "disabled"; + }; + + usb@f9a55000 { + compatible = "qcom,ci-hdrc"; + reg = <0xf9a55000 0x400>; + dr_mode = "otg"; + interrupts = <0 134 0>, <0 140 0>; + interrupt-names = "core_irq", "async_irq"; + usb-phy = <&usb1_phy>; + + status = "disabled"; + }; }; smd { compatible = "qcom,smd"; + adsp { + interrupts = <0 156 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 8>; + qcom,smd-edge = <1>; + }; + modem { interrupts = <0 25 IRQ_TYPE_EDGE_RISING>; diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts index e5dea5bb4032..02b59c5b3c53 100644 --- a/arch/arm/boot/dts/r7s72100-rskrza1.dts +++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts @@ -56,6 +56,19 @@ }; }; +&sdhi1 { + bus-width = <4>; + status = "okay"; +}; + +&ostm0 { + status = "okay"; +}; + +&ostm1 { + status = "okay"; +}; + &scif2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index fb9ef9ca120e..b8aa256bd515 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -108,6 +108,15 @@ clock-output-names = "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scif6", "scif7"; }; + mstp5_clks: mstp5_clks@fcfe0428 { + #clock-cells = <1>; + compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xfcfe0428 4>; + clocks = <&p0_clk>, <&p0_clk>; + clock-indices = <R7S72100_CLK_OSTM0 R7S72100_CLK_OSTM1>; + clock-output-names = "ostm0", "ostm1"; + }; + mstp7_clks: mstp7_clks@fcfe0430 { #clock-cells = <1>; compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -117,6 +126,15 @@ clock-output-names = "ether"; }; + mstp8_clks: mstp8_clks@fcfe0434 { + #clock-cells = <1>; + compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xfcfe0434 4>; + clocks = <&p1_clk>; + clock-indices = <R7S72100_CLK_MMCIF>; + clock-output-names = "mmcif"; + }; + mstp9_clks: mstp9_clks@fcfe0438 { #clock-cells = <1>; compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -140,6 +158,14 @@ >; clock-output-names = "spi0", "spi1", "spi2", "spi3", "spi4"; }; + mstp12_clks: mstp12_clks@fcfe0444 { + #clock-cells = <1>; + compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xfcfe0444 4>; + clocks = <&p1_clk>, <&p1_clk>; + clock-indices = <R7S72100_CLK_SDHI1 R7S72100_CLK_SDHI0>; + clock-output-names = "sdhi1", "sdhi0"; + }; }; cpus { @@ -441,4 +467,61 @@ #size-cells = <0>; status = "disabled"; }; + + mmcif: mmc@e804c800 { + compatible = "renesas,mmcif-r7s72100", "renesas,sh-mmcif"; + reg = <0xe804c800 0x80>; + interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R7S72100_CLK_MMCIF>; + power-domains = <&cpg_clocks>; + reg-io-width = <4>; + bus-width = <8>; + status = "disabled"; + }; + + sdhi0: sd@e804e000 { + compatible = "renesas,sdhi-r7s72100"; + reg = <0xe804e000 0x100>; + interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&mstp12_clks R7S72100_CLK_SDHI0>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + + sdhi1: sd@e804e800 { + compatible = "renesas,sdhi-r7s72100"; + reg = <0xe804e800 0x100>; + interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&mstp12_clks R7S72100_CLK_SDHI1>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + + ostm0: timer@fcfec000 { + compatible = "renesas,r7s72100-ostm", "renesas,ostm"; + reg = <0xfcfec000 0x30>; + interrupts = <GIC_SPI 102 IRQ_TYPE_EDGE_RISING>; + clocks = <&mstp5_clks R7S72100_CLK_OSTM0>; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + ostm1: timer@fcfec400 { + compatible = "renesas,r7s72100-ostm", "renesas,ostm"; + reg = <0xfcfec400 0x30>; + interrupts = <GIC_SPI 103 IRQ_TYPE_EDGE_RISING>; + clocks = <&mstp5_clks R7S72100_CLK_OSTM1>; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index ca8672778fe0..00eb9a7114dc 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -440,7 +440,7 @@ }; mmcif0: mmc@ee200000 { - compatible = "renesas,sh-mmcif"; + compatible = "renesas,mmcif-r8a73a4", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_MMCIF0>; @@ -450,7 +450,7 @@ }; mmcif1: mmc@ee220000 { - compatible = "renesas,sh-mmcif"; + compatible = "renesas,mmcif-r8a73a4", "renesas,sh-mmcif"; reg = <0 0xee220000 0 0x80>; interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_MMCIF1>; @@ -465,7 +465,7 @@ #address-cells = <0>; interrupt-controller; reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x1000>, + <0 0xf1002000 0 0x2000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; @@ -751,6 +751,11 @@ }; }; + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; + sysc: system-controller@e6180000 { compatible = "renesas,sysc-r8a73a4", "renesas,sysc-rmobile"; reg = <0 0xe6180000 0 0x8000>, <0 0xe6188000 0 0x8000>; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 159e04eb1b9e..34159a8349de 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -8,8 +8,6 @@ * kind, whether express or implied. */ -/include/ "skeleton.dtsi" - #include <dt-bindings/clock/r8a7740-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -17,6 +15,8 @@ / { compatible = "renesas,r8a7740"; interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; cpus { #address-cells = <1>; diff --git a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts new file mode 100644 index 000000000000..3a22538208f2 --- /dev/null +++ b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts @@ -0,0 +1,57 @@ +/* + * Device Tree Source for the SK-RZG1M board + * + * Copyright (C) 2016 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7743.dtsi" + +/ { + model = "SK-RZG1M"; + compatible = "renesas,sk-rzg1m", "renesas,r8a7743"; + + aliases { + serial0 = &scif0; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; + + memory@200000000 { + device_type = "memory"; + reg = <2 0x00000000 0 0x40000000>; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&scif0 { + status = "okay"; +}; + +ðer { + phy-handle = <&phy1>; + renesas,ether-link-active-low; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&irqc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + }; +}; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi new file mode 100644 index 000000000000..d8393b97768b --- /dev/null +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -0,0 +1,484 @@ +/* + * Device Tree Source for the r8a7743 SoC + * + * Copyright (C) 2016 Cogent Embedded Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r8a7743-cpg-mssr.h> +#include <dt-bindings/power/r8a7743-sysc.h> + +/ { + compatible = "renesas,r8a7743"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + clock-frequency = <1500000000>; + clocks = <&cpg CPG_CORE R8A7743_CLK_Z>; + power-domains = <&sysc R8A7743_PD_CA15_CPU0>; + next-level-cache = <&L2_CA15>; + }; + + L2_CA15: cache-controller@0 { + compatible = "cache"; + reg = <0>; + cache-unified; + cache-level = <2>; + power-domains = <&sysc R8A7743_PD_CA15_SCU>; + }; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@f1001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, + <0 0xf1002000 0 0x2000>, + <0 0xf1004000 0 0x2000>, + <0 0xf1006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + }; + + irqc: interrupt-controller@e61c0000 { + compatible = "renesas,irqc-r8a7743", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7743-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&usb_extal_clk>; + clock-names = "extal", "usb_extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + }; + + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7743-rst"; + reg = <0 0xe6160000 0 0x100>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7743-sysc"; + reg = <0 0xe6180000 0 0x200>; + #power-domain-cells = <1>; + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a7743", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,dmac-r8a7743", + "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a7743", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c40000 0 0x40>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>; + clock-names = "fck"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>, + <&dmac1 0x21>, <&dmac1 0x22>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa1: serial@e6c50000 { + compatible = "renesas,scifa-r8a7743", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c50000 0 0x40>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>; + clock-names = "fck"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>, + <&dmac1 0x25>, <&dmac1 0x26>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa2: serial@e6c60000 { + compatible = "renesas,scifa-r8a7743", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c60000 0 0x40>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>; + clock-names = "fck"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>, + <&dmac1 0x27>, <&dmac1 0x28>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa3: serial@e6c70000 { + compatible = "renesas,scifa-r8a7743", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c70000 0 0x40>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1106>; + clock-names = "fck"; + dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, + <&dmac1 0x1b>, <&dmac1 0x1c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa4: serial@e6c78000 { + compatible = "renesas,scifa-r8a7743", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c78000 0 0x40>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1107>; + clock-names = "fck"; + dmas = <&dmac0 0x1f>, <&dmac0 0x20>, + <&dmac1 0x1f>, <&dmac1 0x20>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa5: serial@e6c80000 { + compatible = "renesas,scifa-r8a7743", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c80000 0 0x40>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1108>; + clock-names = "fck"; + dmas = <&dmac0 0x23>, <&dmac0 0x24>, + <&dmac1 0x23>, <&dmac1 0x24>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifb0: serial@e6c20000 { + compatible = "renesas,scifb-r8a7743", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c20000 0 0x100>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>; + clock-names = "fck"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, + <&dmac1 0x3d>, <&dmac1 0x3e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifb1: serial@e6c30000 { + compatible = "renesas,scifb-r8a7743", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c30000 0 0x100>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>; + clock-names = "fck"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>, + <&dmac1 0x19>, <&dmac1 0x1a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifb2: serial@e6ce0000 { + compatible = "renesas,scifb-r8a7743", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6ce0000 0 0x100>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 216>; + clock-names = "fck"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, + <&dmac1 0x1d>, <&dmac1 0x1e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7743", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 0x40>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 721>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, + <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a7743", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 0x40>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 720>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, + <&dmac1 0x2d>, <&dmac1 0x2e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif2: serial@e6e58000 { + compatible = "renesas,scif-r8a7743", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e58000 0 0x40>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 719>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, + <&dmac1 0x2b>, <&dmac1 0x2c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif3: serial@e6ea8000 { + compatible = "renesas,scif-r8a7743", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ea8000 0 0x40>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 718>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2f>, <&dmac0 0x30>, + <&dmac1 0x2f>, <&dmac1 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif4: serial@e6ee0000 { + compatible = "renesas,scif-r8a7743", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ee0000 0 0x40>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 715>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, + <&dmac1 0xfb>, <&dmac1 0xfc>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif5: serial@e6ee8000 { + compatible = "renesas,scif-r8a7743", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ee8000 0 0x40>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 714>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, + <&dmac1 0xfd>, <&dmac1 0xfe>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif0: serial@e62c0000 { + compatible = "renesas,hscif-r8a7743", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c0000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 717>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif1: serial@e62c8000 { + compatible = "renesas,hscif-r8a7743", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c8000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif2: serial@e62d0000 { + compatible = "renesas,hscif-r8a7743", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62d0000 0 0x60>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 713>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, + <&dmac1 0x3b>, <&dmac1 0x3c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + ether: ethernet@ee700000 { + compatible = "renesas,ether-r8a7743"; + reg = <0 0xee700000 0 0x400>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 813>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; +}; diff --git a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts new file mode 100644 index 000000000000..97840b340197 --- /dev/null +++ b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts @@ -0,0 +1,52 @@ +/* + * Device Tree Source for the SK-RZG1E board + * + * Copyright (C) 2016 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7745.dtsi" + +/ { + model = "SK-RZG1E"; + compatible = "renesas,sk-rzg1e", "renesas,r8a7745"; + + aliases { + serial0 = &scif2; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&scif2 { + status = "okay"; +}; + +ðer { + phy-handle = <&phy1>; + renesas,ether-link-active-low; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&irqc>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + }; +}; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi new file mode 100644 index 000000000000..1f65ff68a469 --- /dev/null +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -0,0 +1,484 @@ +/* + * Device Tree Source for the r8a7745 SoC + * + * Copyright (C) 2016 Cogent Embedded Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r8a7745-cpg-mssr.h> +#include <dt-bindings/power/r8a7745-sysc.h> + +/ { + compatible = "renesas,r8a7745"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0>; + clock-frequency = <1000000000>; + clocks = <&cpg CPG_CORE R8A7745_CLK_Z2>; + power-domains = <&sysc R8A7745_PD_CA7_CPU0>; + next-level-cache = <&L2_CA7>; + }; + + L2_CA7: cache-controller@0 { + compatible = "cache"; + reg = <0>; + cache-unified; + cache-level = <2>; + power-domains = <&sysc R8A7745_PD_CA7_SCU>; + }; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@f1001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, + <0 0xf1002000 0 0x2000>, + <0 0xf1004000 0 0x2000>, + <0 0xf1006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + }; + + irqc: interrupt-controller@e61c0000 { + compatible = "renesas,irqc-r8a7745", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7745-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&usb_extal_clk>; + clock-names = "extal", "usb_extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + }; + + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7745-rst"; + reg = <0 0xe6160000 0 0x100>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7745-sysc"; + reg = <0 0xe6180000 0 0x200>; + #power-domain-cells = <1>; + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a7745", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,dmac-r8a7745", + "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a7745", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c40000 0 0x40>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>; + clock-names = "fck"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>, + <&dmac1 0x21>, <&dmac1 0x22>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa1: serial@e6c50000 { + compatible = "renesas,scifa-r8a7745", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c50000 0 0x40>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>; + clock-names = "fck"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>, + <&dmac1 0x25>, <&dmac1 0x26>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa2: serial@e6c60000 { + compatible = "renesas,scifa-r8a7745", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c60000 0 0x40>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>; + clock-names = "fck"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>, + <&dmac1 0x27>, <&dmac1 0x28>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa3: serial@e6c70000 { + compatible = "renesas,scifa-r8a7745", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c70000 0 0x40>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1106>; + clock-names = "fck"; + dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, + <&dmac1 0x1b>, <&dmac1 0x1c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa4: serial@e6c78000 { + compatible = "renesas,scifa-r8a7745", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c78000 0 0x40>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1107>; + clock-names = "fck"; + dmas = <&dmac0 0x1f>, <&dmac0 0x20>, + <&dmac1 0x1f>, <&dmac1 0x20>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa5: serial@e6c80000 { + compatible = "renesas,scifa-r8a7745", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c80000 0 0x40>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1108>; + clock-names = "fck"; + dmas = <&dmac0 0x23>, <&dmac0 0x24>, + <&dmac1 0x23>, <&dmac1 0x24>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifb0: serial@e6c20000 { + compatible = "renesas,scifb-r8a7745", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c20000 0 0x100>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>; + clock-names = "fck"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, + <&dmac1 0x3d>, <&dmac1 0x3e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifb1: serial@e6c30000 { + compatible = "renesas,scifb-r8a7745", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c30000 0 0x100>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>; + clock-names = "fck"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>, + <&dmac1 0x19>, <&dmac1 0x1a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifb2: serial@e6ce0000 { + compatible = "renesas,scifb-r8a7745", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6ce0000 0 0x100>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 216>; + clock-names = "fck"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, + <&dmac1 0x1d>, <&dmac1 0x1e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7745", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 0x40>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 721>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, + <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a7745", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 0x40>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 720>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, + <&dmac1 0x2d>, <&dmac1 0x2e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif2: serial@e6e58000 { + compatible = "renesas,scif-r8a7745", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e58000 0 0x40>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 719>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, + <&dmac1 0x2b>, <&dmac1 0x2c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif3: serial@e6ea8000 { + compatible = "renesas,scif-r8a7745", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ea8000 0 0x40>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 718>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2f>, <&dmac0 0x30>, + <&dmac1 0x2f>, <&dmac1 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif4: serial@e6ee0000 { + compatible = "renesas,scif-r8a7745", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ee0000 0 0x40>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 715>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, + <&dmac1 0xfb>, <&dmac1 0xfc>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif5: serial@e6ee8000 { + compatible = "renesas,scif-r8a7745", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ee8000 0 0x40>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 714>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, + <&dmac1 0xfd>, <&dmac1 0xfe>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif0: serial@e62c0000 { + compatible = "renesas,hscif-r8a7745", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c0000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 717>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif1: serial@e62c8000 { + compatible = "renesas,hscif-r8a7745", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c8000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif2: serial@e62d0000 { + compatible = "renesas,hscif-r8a7745", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62d0000 0 0x60>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 713>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, + <&dmac1 0x3b>, <&dmac1 0x3c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + ether: ethernet@ee700000 { + compatible = "renesas,ether-r8a7745"; + reg = <0 0xee700000 0 0x400>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 813>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; +}; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index e571d66ea0fe..1e93c94a9eac 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -14,8 +14,6 @@ * kind, whether express or implied. */ -/include/ "skeleton.dtsi" - #include <dt-bindings/clock/r8a7778-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -23,6 +21,8 @@ / { compatible = "renesas,r8a7778"; interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; cpus { #address-cells = <1>; @@ -150,7 +150,7 @@ i2c0: i2c@ffc70000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7778"; + compatible = "renesas,i2c-r8a7778", "renesas,rcar-gen1-i2c"; reg = <0xffc70000 0x1000>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C0>; @@ -161,7 +161,7 @@ i2c1: i2c@ffc71000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7778"; + compatible = "renesas,i2c-r8a7778", "renesas,rcar-gen1-i2c"; reg = <0xffc71000 0x1000>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C1>; @@ -172,7 +172,7 @@ i2c2: i2c@ffc72000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7778"; + compatible = "renesas,i2c-r8a7778", "renesas,rcar-gen1-i2c"; reg = <0xffc72000 0x1000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C2>; @@ -183,7 +183,7 @@ i2c3: i2c@ffc73000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7778"; + compatible = "renesas,i2c-r8a7778", "renesas,rcar-gen1-i2c"; reg = <0xffc73000 0x1000>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C3>; @@ -369,7 +369,7 @@ }; mmcif: mmc@ffe4e000 { - compatible = "renesas,sh-mmcif"; + compatible = "renesas,mmcif-r8a7778", "renesas,sh-mmcif"; reg = <0xffe4e000 0x100>; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7778_CLK_MMC>; @@ -626,4 +626,9 @@ "sru-src6", "sru-src7", "sru-src8"; }; }; + + rst: reset-controller@ffcc0000 { + compatible = "renesas,r8a7778-reset-wdt"; + reg = <0xffcc0000 0x40>; + }; }; diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index 541678df90a9..89c5b24a3d03 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -170,7 +170,7 @@ du_pins: du { du0 { - groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0"; + groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0", "du0_clk_in"; function = "du0"; }; du1 { @@ -216,6 +216,10 @@ }; }; +&sata { + status = "okay"; +}; + &scif2 { pinctrl-0 = <&scif2_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index b9bbcce69dfb..ae2d9a9c65af 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -9,8 +9,6 @@ * kind, whether express or implied. */ -/include/ "skeleton.dtsi" - #include <dt-bindings/clock/r8a7779-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -19,6 +17,8 @@ / { compatible = "renesas,r8a7779"; interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; cpus { #address-cells = <1>; @@ -173,7 +173,7 @@ i2c0: i2c@ffc70000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7779"; + compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c"; reg = <0xffc70000 0x1000>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C0>; @@ -184,7 +184,7 @@ i2c1: i2c@ffc71000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7779"; + compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c"; reg = <0xffc71000 0x1000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C1>; @@ -195,7 +195,7 @@ i2c2: i2c@ffc72000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7779"; + compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c"; reg = <0xffc72000 0x1000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C2>; @@ -206,7 +206,7 @@ i2c3: i2c@ffc73000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7779"; + compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c"; reg = <0xffc73000 0x1000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C3>; @@ -347,6 +347,7 @@ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7779_CLK_SATA>; power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + status = "disabled"; }; sdhi0: sd@ffe4c000 { @@ -420,7 +421,7 @@ du: display@fff80000 { compatible = "renesas,du-r8a7779"; - reg = <0 0xfff80000 0 0x40000>; + reg = <0xfff80000 0x40000>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7779_CLK_DU>; power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; @@ -590,6 +591,16 @@ }; }; + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0xff000044 4>; + }; + + rst: reset-controller@ffcc0000 { + compatible = "renesas,r8a7779-reset-wdt"; + reg = <0xffcc0000 0x48>; + }; + sysc: system-controller@ffd85000 { compatible = "renesas,r8a7779-sysc"; reg = <0xffd85000 0x0200>; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 52b56fcaddf2..bd512c86e852 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -50,7 +50,9 @@ aliases { serial0 = &scif0; serial1 = &scifa1; - i2c8 = "i2cexio"; + i2c8 = &gpioi2c1; + i2c10 = &i2cexio0; + i2c11 = &i2cexio1; }; chosen { @@ -231,12 +233,23 @@ }; }; + hdmi-in { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&adv7612_in>; + }; + }; + }; + hdmi-out { compatible = "hdmi-connector"; type = "a"; port { - hdmi_con: endpoint { + hdmi_con_out: endpoint { remote-endpoint = <&adv7511_out>; }; }; @@ -254,6 +267,17 @@ clock-frequency = <148500000>; }; + gpioi2c1: i2c-8 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + status = "disabled"; + gpios = <&gpio1 17 GPIO_ACTIVE_HIGH /* sda */ + &gpio1 16 GPIO_ACTIVE_HIGH /* scl */ + >; + i2c-gpio,delay-us = <5>; + }; + /* * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. * We use the I2C demuxer, so the desired IP core can be selected at runtime @@ -262,11 +286,26 @@ * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and * instantiate the slave device at runtime according to the documentation. * You can then communicate with the slave via IIC3. + * + * IIC0/I2C0 does not appear to support fallback to GPIO. */ - i2cexio: i2c-8 { + i2cexio0: i2c-10 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&iic0>, <&i2c0>; - i2c-bus-name = "i2c-exio"; + i2c-bus-name = "i2c-exio0"; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* + * IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA). + * This is similar to the arangement described for i2cexio0 (above) + * with a fallback to GPIO also provided. + */ + i2cexio1: i2c-11 { + compatible = "i2c-demux-pinctrl"; + i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>; + i2c-bus-name = "i2c-exio1"; #address-cells = <1>; #size-cells = <0>; }; @@ -392,6 +431,11 @@ function = "iic0"; }; + i2c1_pins: i2c1 { + groups = "i2c1"; + function = "i2c1"; + }; + iic1_pins: iic1 { groups = "iic1"; function = "iic1"; @@ -427,6 +471,11 @@ function = "usb2"; }; + vin0_pins: vin0 { + groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk"; + function = "vin0"; + }; + vin1_pins: vin1 { groups = "vin1_data8", "vin1_clk"; function = "vin1"; @@ -559,6 +608,7 @@ vqmmc-supply = <&vccq_sdhi0>; cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; @@ -580,18 +630,22 @@ &i2c0 { pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "i2c-exio"; + pinctrl-names = "i2c-exio0"; }; &iic0 { pinctrl-0 = <&iic0_pins>; - pinctrl-names = "i2c-exio"; + pinctrl-names = "i2c-exio0"; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "i2c-exio1"; }; &iic1 { - status = "okay"; pinctrl-0 = <&iic1_pins>; - pinctrl-names = "default"; + pinctrl-names = "i2c-exio1"; }; &iic2 { @@ -646,7 +700,34 @@ port@1 { reg = <1>; adv7511_out: endpoint { - remote-endpoint = <&hdmi_con>; + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; + + hdmi-in@4c { + compatible = "adi,adv7612"; + reg = <0x4c>; + interrupt-parent = <&gpio1>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + default-input = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7612_in: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + + port@2 { + reg = <2>; + adv7612_out: endpoint { + remote-endpoint = <&vin0ep2>; }; }; }; @@ -722,6 +803,25 @@ status = "okay"; }; +/* HDMI video input */ +&vin0 { + pinctrl-0 = <&vin0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + port { + vin0ep2: endpoint { + remote-endpoint = <&adv7612_out>; + bus-width = <24>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + data-active = <1>; + }; + }; +}; + /* composite video input */ &vin1 { pinctrl-0 = <&vin1_pins>; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 351fcc2f87df..6d10450de6d7 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -183,7 +183,7 @@ #address-cells = <0>; interrupt-controller; reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x1000>, + <0 0xf1002000 0 0x2000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; @@ -480,7 +480,7 @@ i2c0: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7790"; + compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C0>; @@ -492,7 +492,7 @@ i2c1: i2c@e6518000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7790"; + compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c"; reg = <0 0xe6518000 0 0x40>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C1>; @@ -504,7 +504,7 @@ i2c2: i2c@e6530000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7790"; + compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c"; reg = <0 0xe6530000 0 0x40>; interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C2>; @@ -516,7 +516,7 @@ i2c3: i2c@e6540000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7790"; + compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c"; reg = <0 0xe6540000 0 0x40>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C3>; @@ -528,7 +528,8 @@ iic0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC0>; @@ -542,7 +543,8 @@ iic1: i2c@e6510000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC1>; @@ -556,7 +558,8 @@ iic2: i2c@e6520000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6520000 0 0x425>; interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC2>; @@ -570,7 +573,8 @@ iic3: i2c@e60b0000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x425>; interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>; @@ -711,7 +715,7 @@ scifb0: serial@e6c20000 { compatible = "renesas,scifb-r8a7790", "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6c20000 0 64>; + reg = <0 0xe6c20000 0 0x100>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>; clock-names = "fck"; @@ -725,7 +729,7 @@ scifb1: serial@e6c30000 { compatible = "renesas,scifb-r8a7790", "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6c30000 0 64>; + reg = <0 0xe6c30000 0 0x100>; interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>; clock-names = "fck"; @@ -739,7 +743,7 @@ scifb2: serial@e6ce0000 { compatible = "renesas,scifb-r8a7790", "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6ce0000 0 64>; + reg = <0 0xe6ce0000 0 0x100>; interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>; clock-names = "fck"; @@ -883,7 +887,8 @@ }; usbphy: usb-phy@e6590100 { - compatible = "renesas,usb-phy-r8a7790"; + compatible = "renesas,usb-phy-r8a7790", + "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; #address-cells = <1>; #size-cells = <0>; @@ -1471,6 +1476,16 @@ }; }; + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7790-rst"; + reg = <0 0xe6160000 0 0x0100>; + }; + sysc: system-controller@e6180000 { compatible = "renesas,r8a7790-sysc"; reg = <0 0xe6180000 0 0x0200>; @@ -1493,7 +1508,8 @@ }; msiof0: spi@e6e20000 { - compatible = "renesas,msiof-r8a7790"; + compatible = "renesas,msiof-r8a7790", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e20000 0 0x0064>; interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>; @@ -1507,7 +1523,8 @@ }; msiof1: spi@e6e10000 { - compatible = "renesas,msiof-r8a7790"; + compatible = "renesas,msiof-r8a7790", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e10000 0 0x0064>; interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>; @@ -1521,7 +1538,8 @@ }; msiof2: spi@e6e00000 { - compatible = "renesas,msiof-r8a7790"; + compatible = "renesas,msiof-r8a7790", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e00000 0 0x0064>; interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>; @@ -1535,7 +1553,8 @@ }; msiof3: spi@e6c90000 { - compatible = "renesas,msiof-r8a7790"; + compatible = "renesas,msiof-r8a7790", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6c90000 0 0x0064>; interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index f8a7d090fd01..5405d337d744 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -50,6 +50,8 @@ aliases { serial0 = &scif0; serial1 = &scif1; + i2c9 = &gpioi2c1; + i2c12 = &i2cexio1; }; chosen { @@ -265,12 +267,23 @@ }; }; + hdmi-in { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&adv7612_in>; + }; + }; + }; + hdmi-out { compatible = "hdmi-connector"; type = "a"; port { - hdmi_con: endpoint { + hdmi_con_out: endpoint { remote-endpoint = <&adv7511_out>; }; }; @@ -287,6 +300,29 @@ #clock-cells = <0>; clock-frequency = <148500000>; }; + + gpioi2c1: i2c-9 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + status = "disabled"; + gpios = <&gpio7 16 GPIO_ACTIVE_HIGH /* sda */ + &gpio7 15 GPIO_ACTIVE_HIGH /* scl */ + >; + i2c-gpio,delay-us = <5>; + }; + + /* + * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA). + * A fallback to GPIO is provided. + */ + i2cexio1: i2c-12 { + compatible = "i2c-demux-pinctrl"; + i2c-parent = <&i2c1>, <&gpioi2c1>; + i2c-bus-name = "i2c-exio1"; + #address-cells = <1>; + #size-cells = <0>; + }; }; &du { @@ -322,6 +358,11 @@ pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; + i2c1_pins: i2c1 { + groups = "i2c1"; + function = "i2c1"; + }; + i2c2_pins: i2c2 { groups = "i2c2"; function = "i2c2"; @@ -360,16 +401,37 @@ sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; }; sdhi1_pins: sd1 { groups = "sdhi1_data4", "sdhi1_ctrl"; function = "sdhi1"; + power-source = <3300>; + }; + + sdhi1_pins_uhs: sd1_uhs { + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; + power-source = <1800>; }; sdhi2_pins: sd2 { groups = "sdhi2_data4", "sdhi2_ctrl"; function = "sdhi2"; + power-source = <3300>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; }; qspi_pins: qspi { @@ -393,6 +455,11 @@ function = "usb1"; }; + vin0_pins: vin0 { + groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk"; + function = "vin0"; + }; + vin1_pins: vin1 { groups = "vin1_data8", "vin1_clk"; function = "vin1"; @@ -454,33 +521,40 @@ &sdhi0 { pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi0>; vqmmc-supply = <&vccq_sdhi0>; cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; &sdhi1 { pinctrl-0 = <&sdhi1_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi1_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi1>; vqmmc-supply = <&vccq_sdhi1>; cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; + sd-uhs-sdr50; status = "okay"; }; &sdhi2 { pinctrl-0 = <&sdhi2_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi2>; vqmmc-supply = <&vccq_sdhi2>; cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; + sd-uhs-sdr50; status = "okay"; }; @@ -538,6 +612,11 @@ }; }; +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "i2c-exio1"; +}; + &i2c2 { pinctrl-0 = <&i2c2_pins>; pinctrl-names = "default"; @@ -590,7 +669,34 @@ port@1 { reg = <1>; adv7511_out: endpoint { - remote-endpoint = <&hdmi_con>; + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; + + hdmi-in@4c { + compatible = "adi,adv7612"; + reg = <0x4c>; + interrupt-parent = <&gpio4>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + default-input = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7612_in: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + + port@2 { + reg = <2>; + adv7612_out: endpoint { + remote-endpoint = <&vin0ep2>; }; }; }; @@ -672,6 +778,27 @@ cpu0-supply = <&vdd_dvfs>; }; +/* HDMI video input */ +&vin0 { + status = "okay"; + pinctrl-0 = <&vin0_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin0ep2: endpoint { + remote-endpoint = <&adv7612_out>; + bus-width = <24>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + data-active = <1>; + }; + }; +}; + /* composite video input */ &vin1 { status = "okay"; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 162b55c665a3..9f9e48511836 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -114,7 +114,7 @@ #address-cells = <0>; interrupt-controller; reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x1000>, + <0 0xf1002000 0 0x2000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; @@ -444,7 +444,7 @@ i2c0: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7791"; + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C0>; @@ -456,7 +456,7 @@ i2c1: i2c@e6518000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7791"; + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6518000 0 0x40>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C1>; @@ -468,7 +468,7 @@ i2c2: i2c@e6530000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7791"; + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6530000 0 0x40>; interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C2>; @@ -480,7 +480,7 @@ i2c3: i2c@e6540000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7791"; + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6540000 0 0x40>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C3>; @@ -492,7 +492,7 @@ i2c4: i2c@e6520000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7791"; + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6520000 0 0x40>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C4>; @@ -505,7 +505,7 @@ /* doesn't need pinmux */ #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7791"; + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6528000 0 0x40>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C5>; @@ -518,7 +518,8 @@ /* doesn't need pinmux */ #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7791", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x425>; interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>; @@ -532,7 +533,8 @@ i2c7: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7791", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_IIC0>; @@ -546,7 +548,8 @@ i2c8: i2c@e6510000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7791", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_IIC1>; @@ -584,6 +587,7 @@ dmas = <&dmac0 0xcd>, <&dmac0 0xce>, <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -596,6 +600,7 @@ dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -608,6 +613,7 @@ dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -699,7 +705,7 @@ scifb0: serial@e6c20000 { compatible = "renesas,scifb-r8a7791", "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6c20000 0 64>; + reg = <0 0xe6c20000 0 0x100>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>; clock-names = "fck"; @@ -713,7 +719,7 @@ scifb1: serial@e6c30000 { compatible = "renesas,scifb-r8a7791", "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6c30000 0 64>; + reg = <0 0xe6c30000 0 0x100>; interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>; clock-names = "fck"; @@ -727,7 +733,7 @@ scifb2: serial@e6ce0000 { compatible = "renesas,scifb-r8a7791", "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6ce0000 0 64>; + reg = <0 0xe6ce0000 0 0x100>; interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>; clock-names = "fck"; @@ -931,7 +937,8 @@ }; usbphy: usb-phy@e6590100 { - compatible = "renesas,usb-phy-r8a7791"; + compatible = "renesas,usb-phy-r8a7791", + "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; #address-cells = <1>; #size-cells = <0>; @@ -1482,6 +1489,16 @@ }; }; + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7791-rst"; + reg = <0 0xe6160000 0 0x0100>; + }; + + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; + sysc: system-controller@e6180000 { compatible = "renesas,r8a7791-sysc"; reg = <0 0xe6180000 0 0x0200>; @@ -1504,7 +1521,8 @@ }; msiof0: spi@e6e20000 { - compatible = "renesas,msiof-r8a7791"; + compatible = "renesas,msiof-r8a7791", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e20000 0 0x0064>; interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; @@ -1518,7 +1536,8 @@ }; msiof1: spi@e6e10000 { - compatible = "renesas,msiof-r8a7791"; + compatible = "renesas,msiof-r8a7791", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e10000 0 0x0064>; interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>; @@ -1532,7 +1551,8 @@ }; msiof2: spi@e6e00000 { - compatible = "renesas,msiof-r8a7791"; + compatible = "renesas,msiof-r8a7791", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e00000 0 0x0064>; interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>; diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts index 6dbb94114a93..c24f26fdab1f 100644 --- a/arch/arm/boot/dts/r8a7792-wheat.dts +++ b/arch/arm/boot/dts/r8a7792-wheat.dts @@ -86,6 +86,34 @@ gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + hdmi-out0 { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con0: endpoint { + remote-endpoint = <&adv7513_0_out>; + }; + }; + }; + + hdmi-out1 { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con1: endpoint { + remote-endpoint = <&adv7513_1_out>; + }; + }; + }; + + osc2_clk: osc2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; }; &extal_clk { @@ -128,6 +156,16 @@ groups = "qspi_ctrl", "qspi_data4"; function = "qspi"; }; + + du0_pins: du0 { + groups = "du0_rgb888", "du0_sync", "du0_disp"; + function = "du0"; + }; + + du1_pins: du1 { + groups = "du1_rgb666", "du1_sync", "du1_disp"; + function = "du1"; + }; }; &scif0 { @@ -197,3 +235,91 @@ }; }; }; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + hdmi@3d { + compatible = "adi,adv7513"; + reg = <0x3d>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7513_0_in: endpoint { + remote-endpoint = <&du_out_rgb0>; + }; + }; + + port@1 { + reg = <1>; + adv7513_0_out: endpoint { + remote-endpoint = <&hdmi_con0>; + }; + }; + }; + }; + + hdmi@39 { + compatible = "adi,adv7513"; + reg = <0x39>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7513_1_in: endpoint { + remote-endpoint = <&du_out_rgb1>; + }; + }; + + port@1 { + reg = <1>; + adv7513_1_out: endpoint { + remote-endpoint = <&hdmi_con1>; + }; + }; + }; + }; +}; + +&du { + pinctrl-0 = <&du0_pins &du1_pins>; + pinctrl-names = "default"; + + clocks = <&mstp7_clks R8A7792_CLK_DU0>, <&mstp7_clks R8A7792_CLK_DU1>, + <&osc2_clk>; + clock-names = "du.0", "du.1", "dclkin.0"; + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7513_0_in>; + }; + }; + port@1 { + endpoint { + remote-endpoint = <&adv7513_1_in>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index 713141d38b3e..8ecfda7a004e 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -26,6 +26,8 @@ i2c4 = &i2c4; i2c5 = &i2c5; spi0 = &qspi; + spi1 = &msiof0; + spi2 = &msiof1; vin0 = &vin0; vin1 = &vin1; vin2 = &vin2; @@ -86,7 +88,7 @@ #interrupt-cells = <3>; interrupt-controller; reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x1000>, + <0 0xf1002000 0 0x2000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | @@ -118,6 +120,16 @@ IRQ_TYPE_LEVEL_LOW)>; }; + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7792-rst"; + reg = <0 0xe6160000 0 0x0100>; + }; + + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; + sysc: system-controller@e6180000 { compatible = "renesas,r8a7792-sysc"; reg = <0 0xe6180000 0 0x0200>; @@ -486,7 +498,8 @@ /* I2C doesn't need pinmux */ i2c0: i2c@e6508000 { - compatible = "renesas,i2c-r8a7792"; + compatible = "renesas,i2c-r8a7792", + "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7792_CLK_I2C0>; @@ -498,7 +511,8 @@ }; i2c1: i2c@e6518000 { - compatible = "renesas,i2c-r8a7792"; + compatible = "renesas,i2c-r8a7792", + "renesas,rcar-gen2-i2c"; reg = <0 0xe6518000 0 0x40>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7792_CLK_I2C1>; @@ -510,7 +524,8 @@ }; i2c2: i2c@e6530000 { - compatible = "renesas,i2c-r8a7792"; + compatible = "renesas,i2c-r8a7792", + "renesas,rcar-gen2-i2c"; reg = <0 0xe6530000 0 0x40>; interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7792_CLK_I2C2>; @@ -522,7 +537,8 @@ }; i2c3: i2c@e6540000 { - compatible = "renesas,i2c-r8a7792"; + compatible = "renesas,i2c-r8a7792", + "renesas,rcar-gen2-i2c"; reg = <0 0xe6540000 0 0x40>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7792_CLK_I2C3>; @@ -534,7 +550,8 @@ }; i2c4: i2c@e6520000 { - compatible = "renesas,i2c-r8a7792"; + compatible = "renesas,i2c-r8a7792", + "renesas,rcar-gen2-i2c"; reg = <0 0xe6520000 0 0x40>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7792_CLK_I2C4>; @@ -546,7 +563,8 @@ }; i2c5: i2c@e6528000 { - compatible = "renesas,i2c-r8a7792"; + compatible = "renesas,i2c-r8a7792", + "renesas,rcar-gen2-i2c"; reg = <0 0xe6528000 0 0x40>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7792_CLK_I2C5>; @@ -572,6 +590,36 @@ status = "disabled"; }; + msiof0: spi@e6e20000 { + compatible = "renesas,msiof-r8a7792", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e20000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7792_CLK_MSIOF0>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>, + <&dmac1 0x51>, <&dmac1 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6e10000 { + compatible = "renesas,msiof-r8a7792", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e10000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7792_CLK_MSIOF1>; + dmas = <&dmac0 0x55>, <&dmac0 0x56>, + <&dmac1 0x55>, <&dmac1 0x56>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + du: display@feb00000 { compatible = "renesas,du-r8a7792"; reg = <0 0xfeb00000 0 0x40000>; @@ -763,6 +811,13 @@ clock-div = <48>; clock-mult = <1>; }; + mp_clk: mp { + compatible = "fixed-factor-clock"; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-div = <15>; + clock-mult = <1>; + }; m2_clk: m2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7792_CLK_PLL1>; @@ -793,6 +848,15 @@ }; /* Gate clocks */ + mstp0_clks: mstp0_clks@e6150130 { + compatible = "renesas,r8a7792-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>; + clocks = <&mp_clk>; + #clock-cells = <1>; + clock-indices = <R8A7792_CLK_MSIOF0>; + clock-output-names = "msiof0"; + }; mstp1_clks: mstp1_clks@e6150134 { compatible = "renesas,r8a7792-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -811,12 +875,13 @@ compatible = "renesas,r8a7792-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; - clocks = <&zs_clk>, <&zs_clk>; + clocks = <&mp_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; clock-indices = < + R8A7792_CLK_MSIOF1 R8A7792_CLK_SYS_DMAC1 R8A7792_CLK_SYS_DMAC0 >; - clock-output-names = "sys-dmac1", "sys-dmac0"; + clock-output-names = "msiof1", "sys-dmac1", "sys-dmac0"; }; mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,r8a7792-mstp-clocks", diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 90af18600124..92fff07c5e2b 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -346,18 +346,18 @@ }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; }; sdhi1_pins: sd1 { - renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; - renesas,function = "sdhi1"; + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; }; sdhi2_pins: sd2 { - renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; - renesas,function = "sdhi2"; + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; }; qspi_pins: qspi { @@ -538,6 +538,27 @@ }; }; +&i2c6 { + status = "okay"; + clock-frequency = <100000>; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + wdt { + compatible = "dlg,da9063-watchdog"; + }; + }; +}; + &rcar_sound { pinctrl-0 = <&sound_pins &sound_clk_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 8d02aacf2892..48ce21c5e8db 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -105,7 +105,7 @@ #address-cells = <0>; interrupt-controller; reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x1000>, + <0 0xf1002000 0 0x2000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; @@ -411,7 +411,7 @@ i2c0: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7793"; + compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_I2C0>; @@ -423,7 +423,7 @@ i2c1: i2c@e6518000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7793"; + compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6518000 0 0x40>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_I2C1>; @@ -435,7 +435,7 @@ i2c2: i2c@e6530000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7793"; + compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6530000 0 0x40>; interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_I2C2>; @@ -447,7 +447,7 @@ i2c3: i2c@e6540000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7793"; + compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6540000 0 0x40>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_I2C3>; @@ -459,7 +459,7 @@ i2c4: i2c@e6520000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7793"; + compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6520000 0 0x40>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_I2C4>; @@ -472,7 +472,7 @@ /* doesn't need pinmux */ #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7793"; + compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6528000 0 0x40>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_I2C5>; @@ -485,7 +485,8 @@ /* doesn't need pinmux */ #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7793", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x425>; interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>; @@ -499,7 +500,8 @@ i2c7: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7793", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7793_CLK_IIC0>; @@ -513,7 +515,8 @@ i2c8: i2c@e6510000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7793", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7793_CLK_IIC1>; @@ -666,7 +669,7 @@ scifb0: serial@e6c20000 { compatible = "renesas,scifb-r8a7793", "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6c20000 0 64>; + reg = <0 0xe6c20000 0 0x100>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>; clock-names = "fck"; @@ -680,7 +683,7 @@ scifb1: serial@e6c30000 { compatible = "renesas,scifb-r8a7793", "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6c30000 0 64>; + reg = <0 0xe6c30000 0 0x100>; interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>; clock-names = "fck"; @@ -694,7 +697,7 @@ scifb2: serial@e6ce0000 { compatible = "renesas,scifb-r8a7793", "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6ce0000 0 64>; + reg = <0 0xe6ce0000 0 0x100>; interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>; clock-names = "fck"; @@ -852,6 +855,33 @@ status = "disabled"; }; + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7793_CLK_VIN0>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + status = "disabled"; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7793_CLK_VIN1>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + status = "disabled"; + }; + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7793_CLK_VIN2>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + status = "disabled"; + }; + qspi: spi@e6b10000 { compatible = "renesas,qspi-r8a7793", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; @@ -1279,6 +1309,16 @@ }; }; + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7793-rst"; + reg = <0 0xe6160000 0 0x0100>; + }; + + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; + sysc: system-controller@e6180000 { compatible = "renesas,r8a7793-sysc"; reg = <0 0xe6180000 0 0x0200>; diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index 8d1b35afaf82..569e3f0e97a5 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -18,6 +18,8 @@ aliases { serial0 = &scif2; + i2c10 = &gpioi2c4; + i2c12 = &i2cexio4; }; chosen { @@ -135,6 +137,29 @@ #clock-cells = <0>; clock-frequency = <148500000>; }; + + gpioi2c4: i2c-10 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + status = "disabled"; + gpios = <&gpio4 9 GPIO_ACTIVE_HIGH /* sda */ + &gpio4 8 GPIO_ACTIVE_HIGH /* scl */ + >; + i2c-gpio,delay-us = <5>; + }; + + /* + * I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA). + * A fallback to GPIO is provided. + */ + i2cexio4: i2c-14 { + compatible = "i2c-demux-pinctrl"; + i2c-parent = <&i2c4>, <&gpioi2c4>; + i2c-bus-name = "i2c-exio4"; + #address-cells = <1>; + #size-cells = <0>; + }; }; &du { @@ -165,8 +190,8 @@ pinctrl-names = "default"; du_pins: du { - groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_dotclkout0"; - function = "du"; + groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out"; + function = "du1"; }; scif2_pins: scif2 { @@ -194,6 +219,11 @@ function = "i2c1"; }; + i2c4_pins: i2c4 { + groups = "i2c4"; + function = "i2c4"; + }; + vin0_pins: vin0 { groups = "vin0_data8", "vin0_clk"; function = "vin0"; @@ -207,11 +237,25 @@ sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; }; sdhi1_pins: sd1 { groups = "sdhi1_data4", "sdhi1_ctrl"; function = "sdhi1"; + power-source = <3300>; + }; + + sdhi1_pins_uhs: sd1_uhs { + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; + power-source = <1800>; }; }; @@ -255,23 +299,28 @@ &sdhi0 { pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi0>; vqmmc-supply = <&vccq_sdhi0>; cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>; + sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; &sdhi1 { pinctrl-0 = <&sdhi1_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi1_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi1>; vqmmc-supply = <&vccq_sdhi1>; cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; + sd-uhs-sdr50; status = "okay"; }; @@ -296,6 +345,11 @@ }; }; +&i2c4 { + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "i2c-exio4"; +}; + &vin0 { status = "okay"; pinctrl-0 = <&vin0_pins>; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 9365580a194f..319c1069b7ee 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -71,7 +71,7 @@ #address-cells = <0>; interrupt-controller; reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x1000>, + <0 0xf1002000 0 0x2000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; @@ -319,7 +319,7 @@ "ch12"; clocks = <&mstp5_clks R8A7794_CLK_AUDIO_DMAC0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <13>; }; @@ -411,7 +411,7 @@ scifb0: serial@e6c20000 { compatible = "renesas,scifb-r8a7794", "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6c20000 0 64>; + reg = <0 0xe6c20000 0 0x100>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>; clock-names = "fck"; @@ -425,7 +425,7 @@ scifb1: serial@e6c30000 { compatible = "renesas,scifb-r8a7794", "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6c30000 0 64>; + reg = <0 0xe6c30000 0 0x100>; interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>; clock-names = "fck"; @@ -439,7 +439,7 @@ scifb2: serial@e6ce0000 { compatible = "renesas,scifb-r8a7794", "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6ce0000 0 64>; + reg = <0 0xe6ce0000 0 0x100>; interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>; clock-names = "fck"; @@ -611,7 +611,7 @@ /* The memory map in the User's Manual maps the cores to bus numbers */ i2c0: i2c@e6508000 { - compatible = "renesas,i2c-r8a7794"; + compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C0>; @@ -623,7 +623,7 @@ }; i2c1: i2c@e6518000 { - compatible = "renesas,i2c-r8a7794"; + compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6518000 0 0x40>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C1>; @@ -635,7 +635,7 @@ }; i2c2: i2c@e6530000 { - compatible = "renesas,i2c-r8a7794"; + compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6530000 0 0x40>; interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C2>; @@ -647,7 +647,7 @@ }; i2c3: i2c@e6540000 { - compatible = "renesas,i2c-r8a7794"; + compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6540000 0 0x40>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C3>; @@ -659,7 +659,7 @@ }; i2c4: i2c@e6520000 { - compatible = "renesas,i2c-r8a7794"; + compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6520000 0 0x40>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C4>; @@ -671,7 +671,7 @@ }; i2c5: i2c@e6528000 { - compatible = "renesas,i2c-r8a7794"; + compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6528000 0 0x40>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C5>; @@ -683,7 +683,8 @@ }; i2c6: i2c@e6500000 { - compatible = "renesas,iic-r8a7794", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7794", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_IIC0>; @@ -697,7 +698,8 @@ }; i2c7: i2c@e6510000 { - compatible = "renesas,iic-r8a7794", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7794", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_IIC1>; @@ -731,6 +733,7 @@ dmas = <&dmac0 0xcd>, <&dmac0 0xce>, <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -743,6 +746,7 @@ dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -755,6 +759,7 @@ dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -875,7 +880,8 @@ }; usbphy: usb-phy@e6590100 { - compatible = "renesas,usb-phy-r8a7794"; + compatible = "renesas,usb-phy-r8a7794", + "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; #address-cells = <1>; #size-cells = <0>; @@ -1025,8 +1031,7 @@ clocks = <&extal_clk &usb_extal_clk>; #clock-cells = <1>; clock-output-names = "main", "pll0", "pll1", "pll3", - "lb", "qspi", "sdh", "sd0", "z", - "rcan"; + "lb", "qspi", "sdh", "sd0", "rcan"; #power-domain-cells = <0>; }; /* Variable factor clocks */ @@ -1260,7 +1265,7 @@ mstp7_clks: mstp7_clks@e615014c { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; - clocks = <&mp_clk>, <&mp_clk>, + clocks = <&mp_clk>, <&hp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&zx_clk>; @@ -1375,6 +1380,16 @@ }; }; + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7794-rst"; + reg = <0 0xe6160000 0 0x0100>; + }; + + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; + sysc: system-controller@e6180000 { compatible = "renesas,r8a7794-sysc"; reg = <0 0xe6180000 0 0x0200>; @@ -1483,67 +1498,67 @@ "mix.0", "mix.1", "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; rcar_sound,dvc { - dvc0: dvc@0 { + dvc0: dvc-0 { dmas = <&audma0 0xbc>; dma-names = "tx"; }; - dvc1: dvc@1 { + dvc1: dvc-1 { dmas = <&audma0 0xbe>; dma-names = "tx"; }; }; rcar_sound,mix { - mix0: mix@0 { }; - mix1: mix@1 { }; + mix0: mix-0 { }; + mix1: mix-1 { }; }; rcar_sound,ctu { - ctu00: ctu@0 { }; - ctu01: ctu@1 { }; - ctu02: ctu@2 { }; - ctu03: ctu@3 { }; - ctu10: ctu@4 { }; - ctu11: ctu@5 { }; - ctu12: ctu@6 { }; - ctu13: ctu@7 { }; + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; }; rcar_sound,src { - src@0 { + src-0 { status = "disabled"; }; - src1: src@1 { + src1: src-1 { interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x87>, <&audma0 0x9c>; dma-names = "rx", "tx"; }; - src2: src@2 { + src2: src-2 { interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x89>, <&audma0 0x9e>; dma-names = "rx", "tx"; }; - src3: src@3 { + src3: src-3 { interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8b>, <&audma0 0xa0>; dma-names = "rx", "tx"; }; - src4: src@4 { + src4: src-4 { interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8d>, <&audma0 0xb0>; dma-names = "rx", "tx"; }; - src5: src@5 { + src5: src-5 { interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8f>, <&audma0 0xb2>; dma-names = "rx", "tx"; }; - src6: src@6 { + src6: src-6 { interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x91>, <&audma0 0xb4>; dma-names = "rx", "tx"; @@ -1551,61 +1566,61 @@ }; rcar_sound,ssi { - ssi0: ssi@0 { + ssi0: ssi-0 { interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x01>, <&audma0 0x02>, <&audma0 0x15>, <&audma0 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi1: ssi@1 { + ssi1: ssi-1 { interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x03>, <&audma0 0x04>, <&audma0 0x49>, <&audma0 0x4a>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi2: ssi@2 { + ssi2: ssi-2 { interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x05>, <&audma0 0x06>, <&audma0 0x63>, <&audma0 0x64>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi3: ssi@3 { + ssi3: ssi-3 { interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x07>, <&audma0 0x08>, <&audma0 0x6f>, <&audma0 0x70>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi4: ssi@4 { + ssi4: ssi-4 { interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x09>, <&audma0 0x0a>, <&audma0 0x71>, <&audma0 0x72>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi5: ssi@5 { + ssi5: ssi-5 { interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0b>, <&audma0 0x0c>, <&audma0 0x73>, <&audma0 0x74>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi6: ssi@6 { + ssi6: ssi-6 { interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0d>, <&audma0 0x0e>, <&audma0 0x75>, <&audma0 0x76>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi7: ssi@7 { + ssi7: ssi-7 { interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0f>, <&audma0 0x10>, <&audma0 0x79>, <&audma0 0x7a>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi8: ssi@8 { + ssi8: ssi-8 { interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x11>, <&audma0 0x12>, <&audma0 0x7b>, <&audma0 0x7c>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi9: ssi@9 { + ssi9: ssi-9 { interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x13>, <&audma0 0x14>, <&audma0 0x7d>, <&audma0 0x7e>; diff --git a/arch/arm/boot/dts/rk1108-evb.dts b/arch/arm/boot/dts/rk1108-evb.dts new file mode 100644 index 000000000000..3956cff4ca79 --- /dev/null +++ b/arch/arm/boot/dts/rk1108-evb.dts @@ -0,0 +1,69 @@ +/* + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "rk1108.dtsi" + +/ { + model = "Rockchip RK1108 Evaluation board"; + compatible = "rockchip,rk1108-evb", "rockchip,rk1108"; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x08000000>; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk1108.dtsi b/arch/arm/boot/dts/rk1108.dtsi new file mode 100644 index 000000000000..d6194bff7afe --- /dev/null +++ b/arch/arm/boot/dts/rk1108.dtsi @@ -0,0 +1,452 @@ +/* + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/rk1108-cru.h> +#include <dt-bindings/pinctrl/rockchip.h> +/ { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "rockchip,rk1108"; + + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@f00 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf00>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; + clock-frequency = <24000000>; + }; + + xin24m: oscillator { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + amba { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pdma: pdma@102a0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x102a0000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + clocks = <&cru ACLK_DMAC>; + clock-names = "apb_pclk"; + }; + }; + + bus_intmem@10080000 { + compatible = "mmio-sram"; + reg = <0x10080000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x10080000 0x2000>; + }; + + uart2: serial@10210000 { + compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart"; + reg = <0x10210000 0x100>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2m0_xfer>; + status = "disabled"; + }; + + uart1: serial@10220000 { + compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart"; + reg = <0x10220000 0x100>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer>; + status = "disabled"; + }; + + uart0: serial@10230000 { + compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart"; + reg = <0x10230000 0x100>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "disabled"; + }; + + grf: syscon@10300000 { + compatible = "rockchip,rk1108-grf", "syscon"; + reg = <0x10300000 0x1000>; + }; + + pmugrf: syscon@20060000 { + compatible = "rockchip,rk1108-pmugrf", "syscon"; + reg = <0x20060000 0x1000>; + }; + + cru: clock-controller@20200000 { + compatible = "rockchip,rk1108-cru"; + reg = <0x20200000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + emmc: dwmmc@30110000 { + compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc"; + clock-freq-min-max = <400000 150000000>; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x30110000 0x4000>; + status = "disabled"; + }; + + sdio: dwmmc@30120000 { + compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc"; + clock-freq-min-max = <400000 150000000>; + clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x30120000 0x4000>; + status = "disabled"; + }; + + sdmmc: dwmmc@30130000 { + compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc"; + clock-freq-min-max = <400000 100000000>; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x30130000 0x4000>; + status = "disabled"; + }; + + gic: interrupt-controller@32010000 { + compatible = "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <0>; + + reg = <0x32011000 0x1000>, + <0x32012000 0x2000>, + <0x32014000 0x2000>, + <0x32016000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk1108-pinctrl"; + rockchip,grf = <&grf>; + rockchip,pmu = <&pmugrf>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio0@20030000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20030000 0x100>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&xin24m>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@10310000 { + compatible = "rockchip,gpio-bank"; + reg = <0x10310000 0x100>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&xin24m>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@10320000 { + compatible = "rockchip,gpio-bank"; + reg = <0x10320000 0x100>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&xin24m>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3@10330000 { + compatible = "rockchip,gpio-bank"; + reg = <0x10330000 0x100>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&xin24m>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { + drive-strength = <8>; + }; + + pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma { + drive-strength = <12>; + }; + + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + pcfg_pull_none_drv_4ma: pcfg-pull-none-drv-4ma { + drive-strength = <4>; + }; + + pcfg_pull_up_drv_4ma: pcfg-pull-up-drv-4ma { + bias-pull-up; + drive-strength = <4>; + }; + + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + pcfg_input_high: pcfg-input-high { + bias-pull-up; + input-enable; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>, + <2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + + i2c2m1 { + i2c2m1_xfer: i2c2m1-xfer { + rockchip,pins = <0 RK_PC2 RK_FUNC_2 &pcfg_pull_none>, + <0 RK_PC6 RK_FUNC_3 &pcfg_pull_none>; + }; + + i2c2m1_gpio: i2c2m1-gpio { + rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>, + <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + i2c2m05v { + i2c2m05v_xfer: i2c2m05v-xfer { + rockchip,pins = <1 RK_PD5 RK_FUNC_2 &pcfg_pull_none>, + <1 RK_PD4 RK_FUNC_2 &pcfg_pull_none>; + }; + + i2c2m05v_gpio: i2c2m05v-gpio { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>, + <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + i2c3 { + i2c3_xfer: i2c3-xfer { + rockchip,pins = <0 RK_PB6 RK_FUNC_1 &pcfg_pull_none>, + <0 RK_PC4 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc_clk: sdmmc-clk { + rockchip,pins = <3 RK_PC4 RK_FUNC_1 &pcfg_pull_none_drv_4ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <3 RK_PC5 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; + }; + + sdmmc_cd: sdmmc-cd { + rockchip,pins = <0 RK_PA1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; + }; + + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>, + <3 RK_PC2 RK_FUNC_1 &pcfg_pull_up_drv_4ma>, + <3 RK_PC1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>, + <3 RK_PC0 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = <3 RK_PA6 RK_FUNC_1 &pcfg_pull_up>, + <3 RK_PA5 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = <3 RK_PA4 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = <3 RK_PA3 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_rts_gpio: uart0-rts-gpio { + rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = <1 RK_PD3 RK_FUNC_1 &pcfg_pull_up>, + <1 RK_PD2 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = <1 RK_PD0 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = <1 RK_PD1 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart2m0 { + uart2m0_xfer: uart2m0-xfer { + rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>, + <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart2m1 { + uart2m1_xfer: uart2m1-xfer { + rockchip,pins = <3 RK_PC3 RK_FUNC_2 &pcfg_pull_up>, + <3 RK_PC2 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + uart2_5v { + uart2_5v_cts: uart2_5v-cts { + rockchip,pins = <1 RK_PD4 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart2_5v_rts: uart2_5v-rts { + rockchip,pins = <1 RK_PD5 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts index 8db9e9b197a2..c0953410121b 100644 --- a/arch/arm/boot/dts/rk3036-evb.dts +++ b/arch/arm/boot/dts/rk3036-evb.dts @@ -46,7 +46,7 @@ model = "Rockchip RK3036 Evaluation board"; compatible = "rockchip,rk3036-evb", "rockchip,rk3036"; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x40000000>; }; @@ -56,7 +56,7 @@ pinctrl-names = "default"; pinctrl-0 = <&emac_xfer>, <&emac_mdio>; phy = <&phy0>; - phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */ + phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */ phy-reset-duration = <10>; /* millisecond */ status = "okay"; diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index 1df1557a46c3..5726135b7f8a 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -46,7 +46,7 @@ model = "Rockchip RK3036 KylinBoard"; compatible = "rockchip,rk3036-kylin", "rockchip,rk3036"; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x20000000>; }; @@ -55,7 +55,7 @@ compatible = "gpio-leds"; work { - gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; label = "kylin:red:led"; pinctrl-names = "default"; pinctrl-0 = <&led_ctl>; @@ -74,9 +74,9 @@ * - SDIO_RESET_L_WL_RST * - SDIO_RESET_L_BT_EN */ - reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>, /* WL_REG_ON */ - <&gpio0 27 GPIO_ACTIVE_LOW>, /* WL_RST */ - <&gpio2 9 GPIO_ACTIVE_LOW>; /* BT_EN */ + reset-gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_LOW>, /* WL_REG_ON */ + <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>, /* WL_RST */ + <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; /* BT_EN */ }; sound { @@ -121,7 +121,7 @@ pinctrl-names = "default"; pinctrl-0 = <&emac_xfer>, <&emac_mdio>; phy = <&phy0>; - phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */ + phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */ phy-reset-duration = <10>; /* millisecond */ status = "okay"; @@ -148,7 +148,7 @@ compatible = "rockchip,rk808"; reg = <0x1b>; interrupt-parent = <&gpio2>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int &global_pwroff>; rockchip,system-power-controller; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index a935523a1eb8..ff9b90bfaefd 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -44,9 +44,11 @@ #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/clock/rk3036-cru.h> #include <dt-bindings/soc/rockchip,boot-mode.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; + compatible = "rockchip,rk3036"; interrupt-parent = <&gic>; @@ -187,7 +189,7 @@ #address-cells = <0>; reg = <0x10139000 0x1000>, - <0x1013a000 0x1000>, + <0x1013a000 0x2000>, <0x1013c000 0x2000>, <0x1013e000 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; @@ -204,7 +206,6 @@ g-np-tx-fifo-size = <16>; g-rx-fifo-size = <275>; g-tx-fifo-size = <256 128 128 64 64 32>; - g-use-dma; status = "disabled"; }; @@ -244,7 +245,7 @@ compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x10214000 0x4000>; clock-frequency = <37500000>; - clock-freq-min-max = <400000 37500000>; + max-frequency = <37500000>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; clock-names = "biu", "ciu"; fifo-depth = <0x100>; @@ -255,7 +256,7 @@ sdio: dwmmc@10218000 { compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x10218000 0x4000>; - clock-freq-min-max = <400000 37500000>; + max-frequency = <37500000>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; @@ -271,7 +272,7 @@ bus-width = <8>; cap-mmc-highspeed; clock-frequency = <37500000>; - clock-freq-min-max = <400000 37500000>; + max-frequency = <37500000>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index bc674ee206ec..e1f5198723b2 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -49,7 +49,7 @@ model = "bq Curie 2"; compatible = "mundoreader,bq-curie2", "rockchip,rk3066a"; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x40000000>; }; @@ -71,7 +71,7 @@ regulator-name = "sdmmc-supply"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; @@ -81,7 +81,7 @@ autorepeat; power { - gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */ + gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */ linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; @@ -89,7 +89,7 @@ debounce-interval = <100>; }; volume-down { - gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */ + gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */ linux,code = <KEY_VOLUMEDOWN>; label = "GPIO Key Vol-"; linux,input-type = <1>; @@ -111,7 +111,7 @@ reg = <0x2d>; interrupt-parent = <&gpio6>; - interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>; vcc5-supply = <&vcc_io>; vcc6-supply = <&vcc_io>; diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts index a2b763e949b4..c6d92c25df42 100644 --- a/arch/arm/boot/dts/rk3066a-marsboard.dts +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts @@ -47,7 +47,7 @@ model = "MarsBoard RK3066"; compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a"; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x40000000>; }; @@ -69,7 +69,7 @@ regulator-name = "sdmmc-supply"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; @@ -91,7 +91,7 @@ reg = <0x2d>; interrupt-parent = <&gpio6>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; vcc1-supply = <&vsys>; vcc2-supply = <&vsys>; @@ -186,7 +186,7 @@ phy0: ethernet-phy@0 { reg = <0>; interrupt-parent = <&gpio1>; - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts new file mode 100644 index 000000000000..7ca1cf5241e0 --- /dev/null +++ b/arch/arm/boot/dts/rk3066a-mk808.dts @@ -0,0 +1,195 @@ +/* + * Copyright (c) 2016 PaweÅ‚ Jarosz <paweljarosz3691@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3066a.dtsi" + +/ { + model = "Rikomagic MK808"; + compatible = "rikomagic,mk808", "rockchip,rk3066a"; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + memory@60000000 { + reg = <0x60000000 0x40000000>; + device_type = "memory"; + }; + + gpio-leds { + compatible = "gpio-leds"; + + blue { + label = "mk808:blue:power"; + gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "default-on"; + }; + }; + + vcc_io: vcc-io { + compatible = "regulator-fixed"; + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_host: usb-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&host_drv>; + pinctrl-names = "default"; + regulator-always-on; + regulator-name = "host-pwr"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; + + vcc_otg: usb-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&otg_drv>; + pinctrl-names = "default"; + regulator-always-on; + regulator-name = "vcc_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&sdmmc_pwr>; + pinctrl-names = "default"; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; + + vcc_wifi: sdio-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&wifi_pwr>; + pinctrl-names = "default"; + regulator-name = "vcc_wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; +}; + +&mmc0 { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + num-slots = <1>; + vmmc-supply = <&vcc_sd>; + status = "okay"; +}; + +&mmc1 { + bus-width = <4>; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>; + pinctrl-names = "default"; + vmmc-supply = <&vcc_wifi>; + status = "okay"; +}; + +&pinctrl { + usb-host { + host_drv: host-drv { + rockchip,pins = <RK_GPIO0 6 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + usb-otg { + otg_drv: otg-drv { + rockchip,pins = <RK_GPIO0 5 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + sdmmc { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <RK_GPIO3 7 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + sdio { + wifi_pwr: wifi-pwr { + rockchip,pins = <RK_GPIO3 24 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index 6e7f2187a0e3..8907deaab18e 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -48,14 +48,14 @@ model = "Rayeager PX2"; compatible = "chipspark,rayeager-px2", "rockchip,rk3066a"; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x40000000>; }; ir: ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio6 1 GPIO_ACTIVE_LOW>; + gpios = <&gpio6 RK_PA1 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_int>; }; @@ -65,7 +65,7 @@ power { wakeup-source; - gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; pinctrl-names = "default"; @@ -115,7 +115,7 @@ vcc_sata: sata-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&sata_pwr>; regulator-name = "usb_5v"; @@ -127,7 +127,7 @@ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -140,7 +140,7 @@ vcc_host: usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_drv>; regulator-name = "host-pwr"; @@ -153,7 +153,7 @@ vcc_otg: usb-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&otg_drv>; regulator-name = "vcc_otg"; @@ -201,7 +201,7 @@ compatible = "asahi-kasei,ak8975"; reg = <0x0d>; interrupt-parent = <&gpio4>; - interrupts = <17 IRQ_TYPE_EDGE_RISING>; + interrupts = <RK_PC1 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&comp_int>; }; @@ -210,7 +210,7 @@ compatible = "fsl,mma8452"; reg = <0x1d>; interrupt-parent = <&gpio4>; - interrupts = <16 IRQ_TYPE_EDGE_RISING>; + interrupts = <RK_PC0 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&gsensor_int>; }; @@ -223,7 +223,7 @@ tps: tps@2d { reg = <0x2d>; interrupt-parent = <&gpio6>; - interrupts = <4 IRQ_TYPE_EDGE_RISING>; + interrupts = <RK_PA4 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int>, <&pwr_hold>; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 0d0dae3a1694..f50481fd8e5c 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -151,6 +151,14 @@ #clock-cells = <1>; #reset-cells = <1>; + assigned-clocks = <&cru PLL_CPLL>, <&cru PLL_GPLL>, + <&cru ACLK_CPU>, <&cru HCLK_CPU>, + <&cru PCLK_CPU>, <&cru ACLK_PERI>, + <&cru HCLK_PERI>, <&cru PCLK_PERI>; + assigned-clock-rates = <400000000>, <594000000>, + <300000000>, <150000000>, + <75000000>, <300000000>, + <150000000>, <75000000>; }; timer@2000e000 { @@ -162,7 +170,7 @@ }; efuse: efuse@20010000 { - compatible = "rockchip,rockchip-efuse"; + compatible = "rockchip,rk3066a-efuse"; reg = <0x20010000 0x4000>; #address-cells = <1>; #size-cells = <1>; @@ -197,7 +205,7 @@ clock-names = "saradc", "apb_pclk"; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; #io-channel-cells = <1>; - resets = <&cru SRST_SARADC>; + resets = <&cru SRST_TSADC>; reset-names = "saradc-apb"; status = "disabled"; }; @@ -628,15 +636,26 @@ }; &mmc0 { + clock-frequency = <50000000>; + dmas = <&dmac2 1>; + dma-names = "rx-tx"; + max-frequency = <50000000>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>; }; &mmc1 { + dmas = <&dmac2 3>; + dma-names = "rx-tx"; pinctrl-names = "default"; pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>; }; +&emmc { + dmas = <&dmac2 4>; + dma-names = "rx-tx"; +}; + &pwm0 { pinctrl-names = "default"; pinctrl-0 = <&pwm0_out>; @@ -668,21 +687,33 @@ }; &uart0 { + compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart"; + dmas = <&dmac1_s 0>, <&dmac1_s 1>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer>; }; &uart1 { + compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart"; + dmas = <&dmac1_s 2>, <&dmac1_s 3>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart1_xfer>; }; &uart2 { + compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart"; + dmas = <&dmac2 6>, <&dmac2 7>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart2_xfer>; }; &uart3 { + compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart"; + dmas = <&dmac2 8>, <&dmac2 9>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart3_xfer>; }; diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts new file mode 100644 index 000000000000..5b2a0b6885cd --- /dev/null +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts @@ -0,0 +1,328 @@ +/* + * Copyright (c) 2016 Andy Yan <andy.yan@rock-chips.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "rk3188.dtsi" + +/ { + model = "Rockchip PX3-EVB"; + compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188"; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + memory@60000000 { + reg = <0x60000000 0x80000000>; + device_type = "memory"; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + power { + gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "GPIO Key Power"; + linux,input-type = <1>; + wakeup-source; + debounce-interval = <100>; + }; + }; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + accelerometer@18 { + compatible = "bosch,bma250"; + reg = <0x18>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + rk808: pmic@1c { + compatible = "rockchip,rk818"; + reg = <0x1c>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB3 IRQ_TYPE_LEVEL_LOW>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_io>; + vcc9-supply = <&vcc_io>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-name = "vdd_arm"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd_gpu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_io"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_cif: LDO_REG1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_cif"; + }; + + vcc_jetta33: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_jetta33"; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + lvds_12: LDO_REG4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "lvds_12"; + }; + + lvds_25: LDO_REG5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "lvds_25"; + }; + + cif_18: LDO_REG6 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "cif_18"; + }; + + vcc_sd: LDO_REG7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_sd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + wl_18: LDO_REG8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "wl_18"; + }; + + lcd_33: SWITCH_REG1 { + regulator-name = "lcd_33"; + }; + }; + }; + +}; + +&i2c2 { + gsl1680: touchscreen@40 { + compatible = "silead,gsl1680"; + reg = <0x40>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PB7 IRQ_TYPE_EDGE_FALLING>; + power-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; + touchscreen-size-x = <800>; + touchscreen-size-y = <1280>; + silead,max-fingers = <5>; + }; +}; + +&mmc0 { + num-slots = <1>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; + vmmc-supply = <&vcc_sd>; + + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; +}; + +&pinctrl { + pcfg_output_low: pcfg-output-low { + output-low; + }; + + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&usb_host { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 1da46d138029..ca0a1c4bc15c 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -48,7 +48,7 @@ model = "Radxa Rock"; compatible = "radxa,rock", "rockchip,rk3188"; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x80000000>; }; @@ -58,7 +58,7 @@ autorepeat; power { - gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; @@ -72,19 +72,19 @@ green { label = "rock:green:user1"; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>; default-state = "off"; }; blue { label = "rock:blue:user2"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>; default-state = "off"; }; sleep { label = "rock:red:power"; - gpios = <&gpio0 15 0>; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; default-state = "off"; }; }; @@ -106,7 +106,7 @@ ir_recv: gpio-ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio0 10 1>; + gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_recv_pin>; }; @@ -114,7 +114,7 @@ vcc_otg: usb-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&otg_vbus_drv>; regulator-name = "otg-vbus"; @@ -129,7 +129,7 @@ regulator-name = "sdmmc-supply"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio3 1 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; @@ -137,7 +137,7 @@ vcc_host: usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "host-pwr"; @@ -168,7 +168,7 @@ phy0: ethernet-phy@0 { reg = <0>; interrupt-parent = <&gpio3>; - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -184,7 +184,7 @@ compatible = "haoyu,hym8563"; reg = <0x51>; interrupt-parent = <&gpio0>; - interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&rtc_int>; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 31f81b265cef..cf91254d0a43 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -147,7 +147,7 @@ }; efuse: efuse@20010000 { - compatible = "rockchip,rockchip-efuse"; + compatible = "rockchip,rk3188-efuse"; reg = <0x20010000 0x4000>; #address-cells = <1>; #size-cells = <1>; @@ -599,21 +599,25 @@ }; &uart0 { + compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart"; pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer>; }; &uart1 { + compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart"; pinctrl-names = "default"; pinctrl-0 = <&uart1_xfer>; }; &uart2 { + compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart"; pinctrl-names = "default"; pinctrl-0 = <&uart2_xfer>; }; &uart3 { + compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart"; pinctrl-names = "default"; pinctrl-0 = <&uart3_xfer>; }; diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts index 904668e2e666..58834330a5ba 100644 --- a/arch/arm/boot/dts/rk3228-evb.dts +++ b/arch/arm/boot/dts/rk3228-evb.dts @@ -46,7 +46,7 @@ model = "Rockchip RK3228 Evaluation board"; compatible = "rockchip,rk3228-evb", "rockchip,rk3228"; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts index b6a12035a6bb..275092a950ef 100644 --- a/arch/arm/boot/dts/rk3229-evb.dts +++ b/arch/arm/boot/dts/rk3229-evb.dts @@ -46,7 +46,7 @@ model = "Rockchip RK3229 Evaluation board"; compatible = "rockchip,rk3229-evb", "rockchip,rk3229"; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x40000000>; }; @@ -77,7 +77,7 @@ phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio2 24 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; tx_delay = <0x30>; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 9e6bf0e311bb..9dff8221112c 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -44,9 +44,11 @@ #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/clock/rk3228-cru.h> #include <dt-bindings/thermal/thermal.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; aliases { @@ -402,7 +404,7 @@ reg = <0x30020000 0x4000>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <37500000>; - clock-freq-min-max = <400000 37500000>; + max-frequency = <37500000>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; @@ -441,7 +443,7 @@ #address-cells = <0>; reg = <0x32011000 0x1000>, - <0x32012000 0x1000>, + <0x32012000 0x2000>, <0x32014000 0x2000>, <0x32016000 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index 041dd5d2d18c..b9418d170502 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -47,7 +47,7 @@ vcc_lcd: vcc-lcd { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 3 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PA3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&lcd_en>; regulator-name = "vcc_lcd"; @@ -57,7 +57,7 @@ vcc_wl: vcc-wl { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 9 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&wifi_pwr>; regulator-name = "vcc_wl"; @@ -96,7 +96,7 @@ reg = <0x51>; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int>; diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts index 44ebc6e59b3a..56c266df01c1 100644 --- a/arch/arm/boot/dts/rk3288-evb-rk808.dts +++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts @@ -52,7 +52,7 @@ compatible = "rockchip,rk808"; reg = <0x1b>; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int &global_pwroff>; rockchip,system-power-controller; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index d59208b5eb6c..0dec94c3583b 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -43,7 +43,7 @@ #include "rk3288.dtsi" / { - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x80000000>; }; @@ -84,7 +84,7 @@ 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255>; default-brightness-level = <128>; - enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bl_en>; pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>; @@ -100,7 +100,7 @@ panel: panel { compatible ="lg,lp079qx1-sp0v", "simple-panel"; backlight = <&backlight>; - enable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&lcd_cs>; ports { @@ -120,7 +120,7 @@ pinctrl-0 = <&pwrbtn>; power { - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; @@ -133,7 +133,7 @@ vcc_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host"; @@ -144,7 +144,7 @@ vcc_phy: vcc-phy-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <ð_phy_pwr>; regulator-name = "vcc_phy"; @@ -170,7 +170,7 @@ */ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -236,7 +236,7 @@ phy-supply = <&vcc_phy>; phy-mode = "rgmii"; clock_in_out = "input"; - snps,reset-gpio = <&gpio4 7 0>; + snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; assigned-clocks = <&cru SCLK_MAC>; diff --git a/arch/arm/boot/dts/rk3288-fennec.dts b/arch/arm/boot/dts/rk3288-fennec.dts index 2e3c34135ed8..61d1c1028317 100644 --- a/arch/arm/boot/dts/rk3288-fennec.dts +++ b/arch/arm/boot/dts/rk3288-fennec.dts @@ -46,7 +46,7 @@ model = "Rockchip RK3288 Fennec Board"; compatible = "rockchip,rk3288-fennec", "rockchip,rk3288"; - memory { + memory@0 { reg = <0x0 0x80000000>; device_type = "memory"; }; @@ -93,7 +93,7 @@ phy-mode = "rgmii"; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; - snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; tx_delay = <0x30>; rx_delay = <0x10>; status = "okay"; @@ -111,7 +111,7 @@ compatible = "rockchip,rk808"; reg = <0x1b>; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; #clock-cells = <1>; clock-output-names = "xin32k", "rk808-clkout2"; pinctrl-names = "default"; @@ -345,7 +345,7 @@ &usbphy { pinctrl-names = "default"; pinctrl-0 = <&host_drv>; - vbus_drv-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + vbus_drv-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-firefly-beta.dts b/arch/arm/boot/dts/rk3288-firefly-beta.dts index 75d77e38e0d6..0195d9721660 100644 --- a/arch/arm/boot/dts/rk3288-firefly-beta.dts +++ b/arch/arm/boot/dts/rk3288-firefly-beta.dts @@ -49,7 +49,7 @@ }; &ir { - gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PA5 GPIO_ACTIVE_LOW>; }; &pinctrl { diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi index ec418c99de95..813496618d08 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi @@ -45,7 +45,7 @@ #include "rk3288.dtsi" / { - memory { + memory@0 { device_type = "memory"; reg = <0 0x80000000>; }; @@ -96,7 +96,7 @@ phy-mode = "rgmii"; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; - snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; tx_delay = <0x30>; rx_delay = <0x10>; status = "ok"; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts index 751bee81128e..d0b3204a4799 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload.dts +++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts @@ -53,7 +53,7 @@ power { wakeup-source; - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; pinctrl-names = "default"; @@ -63,14 +63,14 @@ ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>; }; leds { compatible = "gpio-leds"; power { - gpios = <&gpio8 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>; label = "firefly:blue:power"; pinctrl-names = "default"; pinctrl-0 = <&power_led>; @@ -78,7 +78,7 @@ }; work { - gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; + gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>; label = "firefly:blue:user"; linux,default-trigger = "rc-feedback"; pinctrl-names = "default"; @@ -92,7 +92,7 @@ clock-names = "ext_clock"; pinctrl-names = "default"; pinctrl-0 = <&wifi_enable>; - reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; }; sound { @@ -112,7 +112,7 @@ vcc_host_5v: usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host_5v"; @@ -133,7 +133,7 @@ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -146,7 +146,7 @@ vcc_otg_5v: usb-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&otg_vbus_drv>; regulator-name = "vcc_otg_5v"; @@ -159,7 +159,7 @@ dovdd_1v8: dovdd-1v8-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&dvp_pwr>; regulator-name = "dovdd_1v8"; @@ -171,7 +171,7 @@ vcc28_dvp: vcc28-dvp-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&dvp_pwr>; regulator-name = "vcc28_dvp"; @@ -183,7 +183,7 @@ af_28: af_28-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&dvp_pwr>; regulator-name = "af_28"; @@ -195,7 +195,7 @@ dvdd_1v2: af_28-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cif_pwr>; regulator-name = "dvdd_1v2"; @@ -221,7 +221,7 @@ clock-frequency = <32768>; clock-output-names = "xin32k"; interrupt-parent = <&gpio7>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&rtc_int>; }; diff --git a/arch/arm/boot/dts/rk3288-firefly.dts b/arch/arm/boot/dts/rk3288-firefly.dts index c07fe92dc69f..14271be72f30 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dts +++ b/arch/arm/boot/dts/rk3288-firefly.dts @@ -49,7 +49,7 @@ }; &ir { - gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>; }; &pinctrl { diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 114c90fb65e2..10793ac18599 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -44,7 +44,7 @@ #include "rk3288.dtsi" / { - memory { + memory@0 { device_type = "memory"; reg = <0 0x80000000>; }; @@ -75,7 +75,7 @@ power { wakeup-source; - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; pinctrl-names = "default"; @@ -87,7 +87,7 @@ compatible = "gpio-leds"; work { - gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; + gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>; label = "firefly:blue:user"; linux,default-trigger = "rc-feedback"; pinctrl-names = "default"; @@ -95,7 +95,7 @@ }; power { - gpios = <&gpio8 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>; label = "firefly:green:power"; linux,default-trigger = "default-on"; pinctrl-names = "default"; @@ -114,7 +114,7 @@ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -145,7 +145,7 @@ vcc_host_5v: usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host_5v"; @@ -158,7 +158,7 @@ vcc_otg_5v: usb-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&otg_vbus_drv>; regulator-name = "vcc_otg_5v"; @@ -175,7 +175,7 @@ vcc28_dvp: vcc28-dvp-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&dvp_pwr>; regulator-name = "vcc28_dvp"; @@ -213,7 +213,7 @@ phy-mode = "rgmii"; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; - snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; tx_delay = <0x30>; rx_delay = <0x10>; status = "ok"; @@ -260,7 +260,7 @@ clock-frequency = <32768>; clock-output-names = "xin32k"; interrupt-parent = <&gpio7>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&rtc_int>; }; diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts index 24488421f0f0..21326f3e8564 100644 --- a/arch/arm/boot/dts/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rk3288-miqi.dts @@ -52,7 +52,7 @@ stdout-path = "serial2:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0 0x80000000>; }; @@ -68,7 +68,7 @@ compatible = "gpio-leds"; work { - gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_LOW>; label = "miqi:green:user"; linux,default-trigger = "default-on"; pinctrl-names = "default"; @@ -87,7 +87,7 @@ vcc_host: usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host"; @@ -99,7 +99,7 @@ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -146,7 +146,7 @@ phy-mode = "rgmii"; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; - snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; tx_delay = <0x30>; rx_delay = <0x10>; status = "ok"; diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index 56dd377d5658..aa1f9ecff231 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -48,7 +48,7 @@ model = "PopMetal-RK3288"; compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288"; - memory{ + memory@0 { device_type = "memory"; reg = <0 0x80000000>; }; @@ -68,7 +68,7 @@ pinctrl-0 = <&pwrbtn>; power { - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; @@ -79,7 +79,7 @@ ir: ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_int>; }; @@ -94,7 +94,7 @@ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -128,7 +128,7 @@ vcc28_dvp: vcc28-dvp-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&dvp_pwr>; regulator-name = "vcc28_dvp"; @@ -147,6 +147,8 @@ bus-width = <8>; cap-mmc-highspeed; disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; non-removable; num-slots = <1>; pinctrl-names = "default"; @@ -165,6 +167,10 @@ num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; vmmc-supply = <&vcc_sd>; vqmmc-supply = <&vccio_sd>; status = "okay"; @@ -174,7 +180,7 @@ phy-supply = <&vcc_lan>; phy-mode = "rgmii"; clock_in_out = "input"; - snps,reset-gpio = <&gpio4 7 0>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; assigned-clocks = <&cru SCLK_MAC>; @@ -199,7 +205,7 @@ compatible = "rockchip,rk808"; reg = <0x1b>; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int &global_pwroff>; rockchip,system-power-controller; @@ -280,7 +286,7 @@ vccio_sd: LDO_REG2 { regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-name = "vccio_sd"; regulator-state-mem { @@ -384,7 +390,7 @@ compatible = "asahi-kasei,ak8975"; reg = <0x0d>; interrupt-parent = <&gpio8>; - interrupts = <1 IRQ_TYPE_EDGE_RISING>; + interrupts = <RK_PA1 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&comp_int>; vdd-supply = <&vcc_io>; @@ -403,7 +409,7 @@ compatible = "fsl,mma8452"; reg = <0x1d>; interrupt-parent = <&gpio8>; - interrupts = <0 IRQ_TYPE_EDGE_RISING>; + interrupts = <RK_PA0 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&gsensor_int>; }; @@ -443,43 +449,43 @@ &pinctrl { ak8963 { comp_int: comp-int { - rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; buttons { pwrbtn: pwrbtn { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; dvp { dvp_pwr: dvp-pwr { - rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; ir { ir_int: ir-int { - rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; }; }; mma8452 { gsensor_int: gsensor-int { - rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <8 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; pmic { pmic_int: pmic-int { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; sdmmc { sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts index 4b8a8adb243c..1145b62edde7 100644 --- a/arch/arm/boot/dts/rk3288-r89.dts +++ b/arch/arm/boot/dts/rk3288-r89.dts @@ -48,7 +48,7 @@ / { compatible = "netxeon,r89", "rockchip,rk3288"; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x80000000>; }; @@ -68,7 +68,7 @@ pinctrl-0 = <&pwrbtn>; power { - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; @@ -79,7 +79,7 @@ ir: ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_int>; }; @@ -87,7 +87,7 @@ vcc_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host"; @@ -98,7 +98,7 @@ vcc_otg: vcc-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&otg_vbus_drv>; regulator-name = "vcc_otg"; @@ -111,7 +111,7 @@ regulator-name = "sdmmc-supply"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; @@ -134,7 +134,7 @@ phy-supply = <&vcc_lan>; phy-mode = "rgmii"; clock_in_out = "input"; - snps,reset-gpio = <&gpio4 7 0>; + snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; assigned-clocks = <&cru SCLK_MAC>; @@ -187,7 +187,7 @@ #clock-cells = <0>; clock-output-names = "xin32k"; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int>; }; diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index bb1f01e037ba..1c0bbc9b928b 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -42,7 +42,7 @@ #include "rk3288.dtsi" / { - memory { + memory@0 { reg = <0x0 0x80000000>; device_type = "memory"; }; @@ -51,7 +51,7 @@ compatible = "mmc-pwrseq-emmc"; pinctrl-0 = <&emmc_reset>; pinctrl-names = "default"; - reset-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>; }; ext_gmac: external-gmac-clock { @@ -106,7 +106,7 @@ phy-supply = <&vccio_pmu>; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins &phy_rst>; - snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 30000>; rx_delay = <0x10>; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index dd3ad2e93a6d..96a2e745bb93 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -53,13 +53,13 @@ compatible = "gpio-leds"; heartbeat { - gpios = <&gpio7 15 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PB7 GPIO_ACTIVE_LOW>; label = "rock2:green:state1"; linux,default-trigger = "heartbeat"; }; mmc { - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>; label = "rock2:blue:state2"; linux,default-trigger = "mmc0"; }; @@ -67,7 +67,7 @@ ir: ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; + gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_int>; }; @@ -92,13 +92,13 @@ clock-names = "ext_clock"; pinctrl-names = "default"; pinctrl-0 = <&wifi_enable>; - reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; }; vcc_usb_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; /* Always on as the rockchip usb phy doesn't have a vbus-supply @@ -110,7 +110,7 @@ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -166,7 +166,7 @@ clock-frequency = <32768>; clock-output-names = "xin32k"; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int>; diff --git a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi index 6d105914a4f3..280aceae25d5 100644 --- a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi @@ -17,8 +17,8 @@ rockchip,model = "VEYRON-I2S"; rockchip,i2s-controller = <&i2s>; rockchip,audio-codec = <&max98090>; - rockchip,hp-det-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>; - rockchip,mic-det-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + rockchip,hp-det-gpios = <&gpio6 RK_PA5 GPIO_ACTIVE_HIGH>; + rockchip,mic-det-gpios = <&gpio6 RK_PB3 GPIO_ACTIVE_LOW>; rockchip,headset-codec = <&headsetcodec>; }; }; @@ -28,7 +28,7 @@ compatible = "maxim,max98090"; reg = <0x10>; interrupt-parent = <&gpio6>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA7 IRQ_TYPE_EDGE_FALLING>; clock-names = "mclk"; clocks = <&cru SCLK_I2S0_OUT>; pinctrl-names = "default"; @@ -41,7 +41,7 @@ compatible = "ti,ts3a227e"; reg = <0x3b>; interrupt-parent = <&gpio0>; - interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ts3a227e_int_l>; ti,micbias = <7>; /* MICBIAS = 2.8V */ diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rk3288-veyron-brain.dts index cf5311d2617c..ed4255294ad4 100644 --- a/arch/arm/boot/dts/rk3288-veyron-brain.dts +++ b/arch/arm/boot/dts/rk3288-veyron-brain.dts @@ -67,7 +67,7 @@ vcc5_host2: vcc5-host2-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb2_pwr_en>; regulator-name = "vcc5_host2"; @@ -103,8 +103,8 @@ &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; - dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>, - <&gpio7 15 GPIO_ACTIVE_HIGH>; + dvs-gpios = <&gpio7 RK_PB3 GPIO_ACTIVE_HIGH>, + <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>; /delete-property/ vcc6-supply; @@ -133,7 +133,7 @@ &vcc50_hdmi { enable-active-high; - gpio = <&gpio7 2 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc50_hdmi_en>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index ce1f87980bcb..d752a315f884 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -91,7 +91,7 @@ 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255>; default-brightness-level = <128>; - enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; backlight-boot-off; pinctrl-names = "default"; pinctrl-0 = <&bl_en>; @@ -102,7 +102,7 @@ gpio-charger { compatible = "gpio-charger"; charger-type = "mains"; - gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&ac_present_ap>; }; @@ -142,7 +142,7 @@ vcc5_host1: vcc5-host1-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host1_pwr_en>; regulator-name = "vcc5_host1"; @@ -154,7 +154,7 @@ vcc5v_otg: vcc5v-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usbotg_pwren_h>; regulator-name = "vcc5_host2"; @@ -190,7 +190,7 @@ pinctrl-0 = <&pwr_key_l &ap_lid_int_l>; lid { label = "Lid"; - gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; wakeup-source; linux,code = <0>; /* SW_LID */ linux,input-type = <5>; /* EV_SW */ @@ -228,7 +228,7 @@ reg = <0>; google,cros-ec-spi-pre-delay = <30>; interrupt-parent = <&gpio7>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ec_int>; spi-max-frequency = <3000000>; @@ -247,7 +247,7 @@ compatible = "elan,ekth3000"; reg = <0x15>; interrupt-parent = <&gpio7>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA3 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&trackpad_int>; vcc-supply = <&vcc33_io>; diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts index 3748abf562b1..d33f5763c39c 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -57,7 +57,7 @@ panel_regulator: panel-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; @@ -68,7 +68,7 @@ vcc18_lcd: vcc18-lcd { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&avdd_1v8_disp_en>; regulator-name = "vcc18_lcd"; @@ -80,7 +80,7 @@ backlight_regulator: backlight-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bl_pwr_en>; regulator-name = "backlight_regulator"; @@ -134,8 +134,8 @@ &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; - dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>, - <&gpio7 15 GPIO_ACTIVE_HIGH>; + dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>, + <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>; regulators { mic_vcc: LDO_REG2 { @@ -160,14 +160,14 @@ &vcc_5v { enable-active-high; - gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&drv_5v>; }; &vcc50_hdmi { enable-active-high; - gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc50_hdmi_en>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts index f6b2eaaebb9a..cdea751f2a8c 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts @@ -56,7 +56,7 @@ panel_regulator: panel-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; @@ -67,7 +67,7 @@ vcc18_lcd: vcc18-lcd { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&avdd_1v8_disp_en>; regulator-name = "vcc18_lcd"; @@ -79,7 +79,7 @@ backlight_regulator: backlight-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bl_pwr_en>; regulator-name = "backlight_regulator"; @@ -123,14 +123,14 @@ &vcc_5v { enable-active-high; - gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&drv_5v>; }; &vcc50_hdmi { enable-active-high; - gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc50_hdmi_en>; }; @@ -197,7 +197,7 @@ trackpad@2c { compatible = "hid-over-i2c"; interrupt-parent = <&gpio7>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA3 IRQ_TYPE_EDGE_FALLING>; reg = <0x2c>; hid-descr-addr = <0x0020>; vcc-supply = <&vcc33_io>; diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts index f36f6f459225..f0994f0e5774 100644 --- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts +++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts @@ -182,8 +182,8 @@ &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; - dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>, - <&gpio7 15 GPIO_ACTIVE_HIGH>; + dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>, + <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>; /delete-property/ vcc6-supply; /delete-property/ vcc12-supply; @@ -244,7 +244,7 @@ &vcc50_hdmi { enable-active-high; - gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&power_hdmi_on>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index f72d616d1bf8..544de6027aaa 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -55,7 +55,7 @@ backlight_regulator: backlight-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bl_pwr_en>; regulator-name = "backlight_regulator"; @@ -66,7 +66,7 @@ panel_regulator: panel-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; @@ -77,7 +77,7 @@ vcc18_lcd: vcc18-lcd { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&avdd_1v8_disp_en>; regulator-name = "vcc18_lcd"; @@ -134,14 +134,14 @@ volum_down { label = "Volum_down"; - gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; debounce-interval = <100>; }; volum_up { label = "Volum_up"; - gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; + gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; debounce-interval = <100>; }; @@ -165,10 +165,10 @@ compatible = "elan,ekth3500"; reg = <0x10>; interrupt-parent = <&gpio2>; - interrupts = <14 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PB6 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&touch_int &touch_rst>; - reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>; vcc33-supply = <&vcc33_touch>; vccio-supply = <&vcc33_touch>; }; @@ -211,14 +211,14 @@ &vcc_5v { enable-active-high; - gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&drv_5v>; }; &vcc50_hdmi { enable-active-high; - gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc50_hdmi_en>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts index d44351ec2333..995cff42fa43 100644 --- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts +++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts @@ -76,7 +76,7 @@ pinctrl-0 = <&pwr_key_h &ap_lid_int_l>; power { - gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; }; }; @@ -126,7 +126,7 @@ pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio &sdmmc_wp_gpio &sdmmc_bus4>; - wp-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio7 RK_PB2 GPIO_ACTIVE_HIGH>; }; &tsadc { diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi index fec076eb7aef..aef07101e9ab 100644 --- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi @@ -115,7 +115,7 @@ cap-mmc-highspeed; cap-sd-highspeed; card-detect-delay = <200>; - cd-gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio7 RK_PA5 GPIO_ACTIVE_LOW>; rockchip,default-sample-phase = <90>; num-slots = <1>; sd-uhs-sdr12; diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts index a0d033f6fe52..cc0b78cefe34 100644 --- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts @@ -57,7 +57,7 @@ panel_regulator: panel-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; @@ -68,7 +68,7 @@ vcc18_lcd: vcc18-lcd { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&avdd_1v8_disp_en>; regulator-name = "vcc18_lcd"; @@ -80,7 +80,7 @@ backlight_regulator: backlight-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bl_pwr_en>; regulator-name = "backlight_regulator"; @@ -126,14 +126,14 @@ &vcc_5v { enable-active-high; - gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&drv_5v>; }; &vcc50_hdmi { enable-active-high; - gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc50_hdmi_en>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 3dd2cca48c11..5d1eb0a25827 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -47,7 +47,7 @@ #include "rk3288.dtsi" / { - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x80000000>; }; @@ -61,7 +61,7 @@ pinctrl-0 = <&pwr_key_l>; power { label = "Power"; - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; debounce-interval = <100>; wakeup-source; @@ -70,7 +70,7 @@ gpio-restart { compatible = "gpio-restart"; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&ap_warm_reset_h>; priority = <200>; @@ -80,7 +80,7 @@ compatible = "mmc-pwrseq-emmc"; pinctrl-0 = <&emmc_reset>; pinctrl-names = "default"; - reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>; }; sdio_pwrseq: sdio-pwrseq { @@ -96,7 +96,7 @@ * - SDIO_RESET_L_WL_REG_ON * - PDN (power down when low) */ - reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; }; vcc_5v: vcc-5v { @@ -178,7 +178,7 @@ reg = <0x1b>; clock-output-names = "xin32k", "wifibt_32kin"; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; rockchip,system-power-controller; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 17ec2e2d7a60..df8a0dbe9d91 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -46,9 +46,11 @@ #include <dt-bindings/thermal/thermal.h> #include <dt-bindings/power/rk3288-power.h> #include <dt-bindings/soc/rockchip,boot-mode.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; + compatible = "rockchip,rk3288"; interrupt-parent = <&gic>; @@ -227,7 +229,7 @@ sdmmc: dwmmc@ff0c0000 { compatible = "rockchip,rk3288-dw-mshc"; - clock-freq-min-max = <400000 150000000>; + max-frequency = <150000000>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; @@ -239,7 +241,7 @@ sdio0: dwmmc@ff0d0000 { compatible = "rockchip,rk3288-dw-mshc"; - clock-freq-min-max = <400000 150000000>; + max-frequency = <150000000>; clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>, <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; @@ -251,7 +253,7 @@ sdio1: dwmmc@ff0e0000 { compatible = "rockchip,rk3288-dw-mshc"; - clock-freq-min-max = <400000 150000000>; + max-frequency = <150000000>; clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>, <&cru SCLK_SDIO1_DRV>, <&cru SCLK_SDIO1_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; @@ -263,7 +265,7 @@ emmc: dwmmc@ff0f0000 { compatible = "rockchip,rk3288-dw-mshc"; - clock-freq-min-max = <400000 150000000>; + max-frequency = <150000000>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; @@ -596,7 +598,6 @@ g-np-tx-fifo-size = <16>; g-rx-fifo-size = <275>; g-tx-fifo-size = <256 128 128 64 64 32>; - g-use-dma; phys = <&usbphy0>; phy-names = "usb2-phy"; status = "disabled"; @@ -761,6 +762,15 @@ <&cru SCLK_ISP_JPE>, <&cru SCLK_ISP>, <&cru SCLK_RGA>; + pm_qos = <&qos_vio0_iep>, + <&qos_vio1_vop>, + <&qos_vio1_isp_w0>, + <&qos_vio1_isp_w1>, + <&qos_vio0_vop>, + <&qos_vio0_vip>, + <&qos_vio2_rga_r>, + <&qos_vio2_rga_w>, + <&qos_vio1_isp_r>; }; /* @@ -772,6 +782,8 @@ clocks = <&cru ACLK_HEVC>, <&cru SCLK_HEVC_CABAC>, <&cru SCLK_HEVC_CORE>; + pm_qos = <&qos_hevc_r>, + <&qos_hevc_w>; }; /* @@ -783,6 +795,7 @@ reg = <RK3288_PD_VIDEO>; clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; + pm_qos = <&qos_video>; }; /* @@ -792,6 +805,8 @@ pd_gpu@RK3288_PD_GPU { reg = <RK3288_PD_GPU>; clocks = <&cru ACLK_GPU>; + pm_qos = <&qos_gpu_r>, + <&qos_gpu_w>; }; }; @@ -1102,6 +1117,76 @@ }; }; + qos_gpu_r: qos@ffaa0000 { + compatible = "syscon"; + reg = <0xffaa0000 0x20>; + }; + + qos_gpu_w: qos@ffaa0080 { + compatible = "syscon"; + reg = <0xffaa0080 0x20>; + }; + + qos_vio1_vop: qos@ffad0000 { + compatible = "syscon"; + reg = <0xffad0000 0x20>; + }; + + qos_vio1_isp_w0: qos@ffad0100 { + compatible = "syscon"; + reg = <0xffad0100 0x20>; + }; + + qos_vio1_isp_w1: qos@ffad0180 { + compatible = "syscon"; + reg = <0xffad0180 0x20>; + }; + + qos_vio0_vop: qos@ffad0400 { + compatible = "syscon"; + reg = <0xffad0400 0x20>; + }; + + qos_vio0_vip: qos@ffad0480 { + compatible = "syscon"; + reg = <0xffad0480 0x20>; + }; + + qos_vio0_iep: qos@ffad0500 { + compatible = "syscon"; + reg = <0xffad0500 0x20>; + }; + + qos_vio2_rga_r: qos@ffad0800 { + compatible = "syscon"; + reg = <0xffad0800 0x20>; + }; + + qos_vio2_rga_w: qos@ffad0880 { + compatible = "syscon"; + reg = <0xffad0880 0x20>; + }; + + qos_vio1_isp_r: qos@ffad0900 { + compatible = "syscon"; + reg = <0xffad0900 0x20>; + }; + + qos_video: qos@ffae0000 { + compatible = "syscon"; + reg = <0xffae0000 0x20>; + }; + + qos_hevc_r: qos@ffaf0000 { + compatible = "syscon"; + reg = <0xffaf0000 0x20>; + }; + + qos_hevc_w: qos@ffaf0080 { + compatible = "syscon"; + reg = <0xffaf0080 0x20>; + }; + gic: interrupt-controller@ffc01000 { compatible = "arm,gic-400"; interrupt-controller; @@ -1109,14 +1194,14 @@ #address-cells = <0>; reg = <0xffc01000 0x1000>, - <0xffc02000 0x1000>, + <0xffc02000 0x2000>, <0xffc04000 0x2000>, <0xffc06000 0x2000>; interrupts = <GIC_PPI 9 0xf04>; }; efuse: efuse@ffb40000 { - compatible = "rockchip,rockchip-efuse"; + compatible = "rockchip,rk3288-efuse"; reg = <0xffb40000 0x20>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index e15beb3c671e..0b45811cf28b 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -44,9 +44,11 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/soc/rockchip,boot-mode.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; aliases { @@ -181,7 +183,6 @@ g-np-tx-fifo-size = <16>; g-rx-fifo-size = <275>; g-tx-fifo-size = <256 128 128 64 64 32>; - g-use-dma; phys = <&usbphy0>; phy-names = "usb2-phy"; status = "disabled"; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 7173ec9059a1..22332be72140 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -395,6 +395,16 @@ clock-names = "dma_clk"; }; + /* Place dma1 here despite its address */ + dma1: dma-controller@f0004000 { + compatible = "atmel,sama5d4-dma"; + reg = <0xf0004000 0x1000>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <1>; + clocks = <&dma1_clk>; + clock-names = "dma_clk"; + }; + pmc: pmc@f0014000 { compatible = "atmel,sama5d2-pmc", "syscon"; reg = <0xf0014000 0x160>; @@ -735,6 +745,11 @@ atmel,clk-output-range = <0 83000000>; }; + securam_clk: securam_clk { + #clock-cells = <0>; + reg = <51>; + }; + i2s0_clk: i2s0_clk { #clock-cells = <0>; reg = <54>; @@ -926,6 +941,22 @@ status = "disabled"; }; + ssc0: ssc@f8004000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf8004000 0x4000>; + interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(21))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(22))>; + dma-names = "tx", "rx"; + clocks = <&ssc0_clk>; + clock-names = "pclk"; + status = "disabled"; + }; + macb0: ethernet@f8008000 { compatible = "atmel,sama5d2-gem"; reg = <0xf8008000 0x1000>; @@ -1030,6 +1061,7 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&twi0_clk>; + atmel,fifo-size = <16>; status = "disabled"; }; @@ -1058,6 +1090,15 @@ status = "disabled"; }; + securam: sram@f8044000 { + compatible = "atmel,sama5d2-securam", "mmio-sram"; + reg = <0xf8044000 0x1420>; + clocks = <&securam_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xf8044000 0x1420>; + }; + rstc@f8048000 { compatible = "atmel,sama5d3-rstc"; reg = <0xf8048000 0x10>; @@ -1088,30 +1129,12 @@ status = "disabled"; }; - sckc@f8048050 { - compatible = "atmel,at91sam9x5-sckc"; + clk32k: sckc@f8048050 { + compatible = "atmel,sama5d4-sckc"; reg = <0xf8048050 0x4>; - slow_rc_osc: slow_rc_osc { - compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-accuracy = <250000000>; - atmel,startup-time-usec = <75>; - }; - - slow_osc: slow_osc { - compatible = "atmel,at91sam9x5-clk-slow-osc"; - #clock-cells = <0>; - clocks = <&slow_xtal>; - atmel,startup-time-usec = <1200000>; - }; - - clk32k: slowck { - compatible = "atmel,at91sam9x5-clk-slow"; - #clock-cells = <0>; - clocks = <&slow_rc_osc &slow_osc>; - }; + clocks = <&slow_xtal>; + #clock-cells = <0>; }; rtc@f80480b0 { @@ -1144,10 +1167,10 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xfc008000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>; - dmas = <&dma0 + dmas = <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(41))>, - <&dma0 + <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(42))>; dma-names = "tx", "rx"; @@ -1231,6 +1254,7 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&twi1_clk>; + atmel,fifo-size = <16>; status = "disabled"; }; @@ -1260,6 +1284,11 @@ clocks = <&pioA_clk>; }; + secumod@fc040000 { + compatible = "atmel,sama5d2-secumod", "syscon"; + reg = <0xfc040000 0x100>; + }; + tdes@fc044000 { compatible = "atmel,at91sam9g46-tdes"; reg = <0xfc044000 0x100>; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 4c84d333fc7e..b06448ba6649 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -549,8 +549,8 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB30 periph A */ - AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB31 periph A with pullup */ + <AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; }; diff --git a/arch/arm/boot/dts/sama5d36ek_cmp.dts b/arch/arm/boot/dts/sama5d36ek_cmp.dts new file mode 100644 index 000000000000..b632143844e5 --- /dev/null +++ b/arch/arm/boot/dts/sama5d36ek_cmp.dts @@ -0,0 +1,87 @@ +/* + * sama5d36ek_cmp.dts - Device Tree file for SAMA5D36-EK CMP board + * + * Copyright (C) 2016 Atmel, + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; +#include "sama5d36.dtsi" +#include "sama5d3xmb_cmp.dtsi" + +/ { + model = "Atmel SAMA5D36EK-CMP"; + compatible = "atmel,sama5d36ek-cmp", "atmel,sama5d3xmb-cmp", "atmel,sama5d3xcm-cmp", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + spi0: spi@f0004000 { + status = "okay"; + }; + + ssc0: ssc@f0008000 { + status = "okay"; + }; + + can0: can@f000c000 { + status = "okay"; + }; + + i2c0: i2c@f0014000 { + status = "okay"; + }; + + i2c1: i2c@f0018000 { + status = "okay"; + }; + + macb0: ethernet@f0028000 { + status = "okay"; + }; + + macb1: ethernet@f802c000 { + status = "okay"; + }; + }; + }; + + sound { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi index 2511d748867b..186377d41c91 100644 --- a/arch/arm/boot/dts/sama5d3_uart.dtsi +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi @@ -55,7 +55,7 @@ uart0: serial@f0024000 { compatible = "atmel,at91sam9260-usart"; - reg = <0xf0024000 0x200>; + reg = <0xf0024000 0x100>; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; @@ -66,7 +66,7 @@ uart1: serial@f8028000 { compatible = "atmel,at91sam9260-usart"; - reg = <0xf8028000 0x200>; + reg = <0xf8028000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi new file mode 100644 index 000000000000..dc7572bc7ff0 --- /dev/null +++ b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi @@ -0,0 +1,201 @@ +/* + * sama5d3xcm_cmp.dtsi - Device Tree Include file for SAMA5D36 CMP CPU Module + * + * Copyright (C) 2016 Atmel, + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + compatible = "atmel,sama5d3xcm-cmp", "atmel,sama5d3", "atmel,sama5"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x20000000 0x20000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + spi0: spi@f0004000 { + cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; + }; + + macb0: ethernet@f0028000 { + phy-mode = "rgmii"; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; + + ethernet-phy@7 { + reg = <0x7>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; + }; + + i2c1: i2c@f0018000 { + pmic: act8865@5b { + compatible = "active-semi,act8865"; + reg = <0x5b>; + status = "disabled"; + + regulators { + vcc_1v8_reg: DCDC_REG1 { + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc_1v2_reg: DCDC_REG2 { + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + + vcc_3v3_reg: DCDC_REG3 { + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vddana_reg: LDO_REG1 { + regulator-name = "VDDANA"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vddfuse_reg: LDO_REG2 { + regulator-name = "FUSE_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + }; + }; + }; + }; + + nand0: nand@60000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + atmel,has-pmecc; + atmel,pmecc-cap = <4>; + atmel,pmecc-sector-size = <512>; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + d2 { + label = "d2"; + gpios = <&pioE 25 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi new file mode 100644 index 000000000000..252e0d35f846 --- /dev/null +++ b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi @@ -0,0 +1,301 @@ +/* + * sama5d3xmb_cmp.dts - Device Tree file for SAMA5D3x CMP mother board + * + * Copyright (C) 2016 Atmel, + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include "sama5d3xcm_cmp.dtsi" + +/ { + compatible = "atmel,sama5d3xmb-cmp", "atmel,sama5d3xcm-cmp", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + mmc0: mmc@f0000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>; + }; + }; + + spi0: spi@f0004000 { + dmas = <0>, <0>; /* Do not use DMA for spi0 */ + + m25p80@0 { + compatible = "atmel,at25df321a"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; + + ssc0: ssc@f0008000 { + atmel,clk-from-rk-pin; + }; + + /* + * i2c0 conflicts with ISI: + * disable it to allow the use of ISI + * can not enable audio when i2c0 disabled + */ + i2c0: i2c@f0014000 { + wm8904: wm8904@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + clocks = <&pck0>; + clock-names = "mclk"; + }; + }; + + i2c1: i2c@f0018000 { + ov2640: camera@0x30 { + compatible = "ovti,ov2640"; + reg = <0x30>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; + resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>; + pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; + /* use pck1 for the master clock of ov2640 */ + clocks = <&pck1>; + clock-names = "xvclk"; + assigned-clocks = <&pck1>; + assigned-clock-rates = <25000000>; + + port { + ov2640_0: endpoint { + remote-endpoint = <&isi_0>; + bus-width = <8>; + }; + }; + }; + }; + + usart1: serial@f0020000 { + dmas = <0>, <0>; /* Do not use DMA for usart1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; + status = "okay"; + }; + + isi: isi@f0034000 { + port { + isi_0: endpoint { + remote-endpoint = <&ov2640_0>; + bus-width = <8>; + vsync-active = <1>; + hsync-active = <1>; + }; + }; + }; + + mmc1: mmc@f8000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>; + }; + }; + + adc0: adc@f8018000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = < + &pinctrl_adc0_adtrg + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + >; + pinctrl-1 = < + &pinctrl_adc0_adtrg_sleep + &pinctrl_adc0_ad0_sleep + &pinctrl_adc0_ad1_sleep + &pinctrl_adc0_ad2_sleep + &pinctrl_adc0_ad3_sleep + &pinctrl_adc0_ad4_sleep + >; + status = "okay"; + }; + + macb1: ethernet@f802c000 { + phy-mode = "rmii"; + + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@1 { + /*interrupt-parent = <&pioE>;*/ + /*interrupts = <30 IRQ_TYPE_EDGE_FALLING>;*/ + reg = <1>; + }; + }; + + pinctrl@fffff200 { + adc0 { + pinctrl_adc0_adtrg_sleep: adc0_adtrg_1 { + atmel,pins = + <AT91_PIOD 19 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + pinctrl_adc0_ad0_sleep: adc0_ad0_1 { + atmel,pins = + <AT91_PIOD 20 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + pinctrl_adc0_ad1_sleep: adc0_ad1_1 { + atmel,pins = + <AT91_PIOD 21 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + pinctrl_adc0_ad2_sleep: adc0_ad2_1 { + atmel,pins = + <AT91_PIOD 22 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + pinctrl_adc0_ad3_sleep: adc0_ad3_1 { + atmel,pins = + <AT91_PIOD 23 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + pinctrl_adc0_ad4_sleep: adc0_ad4_1 { + atmel,pins = + <AT91_PIOD 24 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + }; + + board { + pinctrl_gpio_keys: gpio_keys { + atmel,pins = + <AT91_PIOE 27 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = + <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + + pinctrl_mmc1_cd: mmc1_cd { + atmel,pins = + <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + + pinctrl_pck0_as_audio_mck: pck0_as_audio_mck { + atmel,pins = + <AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 { + atmel,pins = + <AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_sensor_reset: sensor_reset-0 { + atmel,pins = + <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + + pinctrl_sensor_power: sensor_power-0 { + atmel,pins = + <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + }; + }; + + dbgu: serial@ffffee00 { + dmas = <0>, <0>; /* Do not use DMA for dbgu */ + status = "okay"; + }; + + watchdog@fffffe40 { + status = "okay"; + }; + }; + + usb0: gadget@00500000 { + atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; + }; + }; + + sound { + compatible = "atmel,asoc-wm8904"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_audio_mck>; + + atmel,model = "wm8904 @ SAMA5D3EK"; + atmel,audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "Mic", "MICBIAS", + "IN1L", "Mic"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8904>; + + status = "disabled"; + }; + + /* Conflict with LCD pins */ + gpio_keys { + compatible = "gpio-keys"; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + pb_user1 { + label = "pb_user1"; + gpios = <&pioE 27 GPIO_ACTIVE_HIGH>; + linux,code = <0x100>; + wakeup-source; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 65e725fb5679..d3889c9d25a9 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -854,10 +854,10 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8004000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>; - dmas = <&dma1 + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(22))>, - <&dma1 + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(23))>; dma-names = "tx", "rx"; @@ -938,10 +938,10 @@ compatible = "atmel,sama5d4-i2c"; reg = <0xf8018000 0x4000>; interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>; - dmas = <&dma1 + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(4))>, - <&dma1 + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(5))>; dma-names = "tx", "rx"; @@ -1055,10 +1055,10 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xfc004000 0x100>; interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; - dmas = <&dma1 + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(24))>, - <&dma1 + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>; dma-names = "tx", "rx"; @@ -1167,10 +1167,10 @@ compatible = "atmel,at91rm9200-spi"; reg = <0xfc01c000 0x100>; interrupts = <39 IRQ_TYPE_LEVEL_HIGH 3>; - dmas = <&dma1 + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(14))>, - <&dma1 + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(15))>; dma-names = "tx", "rx"; @@ -1314,30 +1314,11 @@ status = "disabled"; }; - sckc@fc068650 { - compatible = "atmel,at91sam9x5-sckc"; + clk32k: sckc@fc068650 { + compatible = "atmel,sama5d4-sckc"; reg = <0xfc068650 0x4>; - - slow_rc_osc: slow_rc_osc { - compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-accuracy = <250000000>; - atmel,startup-time-usec = <75>; - }; - - slow_osc: slow_osc { - compatible = "atmel,at91sam9x5-clk-slow-osc"; - #clock-cells = <0>; - clocks = <&slow_xtal>; - atmel,startup-time-usec = <1200000>; - }; - - clk32k: slowck { - compatible = "atmel,at91sam9x5-clk-slow"; - #clock-cells = <0>; - clocks = <&slow_rc_osc &slow_osc>; - }; + #clock-cells = <0>; + clocks = <&slow_xtal>; }; rtc@fc0686b0 { @@ -1461,8 +1442,8 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>, /* conflicts with D14 and TDI */ - <AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* conflicts with D15 and TDO */ + <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* conflicts with D14 and TDI */ + AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* conflicts with D15 and TDO */ }; }; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 032fe2f14b16..6b01ab354e88 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -8,8 +8,6 @@ * kind, whether express or implied. */ -/include/ "skeleton.dtsi" - #include <dt-bindings/clock/sh73a0-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -17,6 +15,8 @@ / { compatible = "renesas,sh73a0"; interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; cpus { #address-cells = <1>; @@ -263,7 +263,7 @@ }; mmcif: mmc@e6bd0000 { - compatible = "renesas,sh-mmcif"; + compatible = "renesas,mmcif-sh73a0", "renesas,sh-mmcif"; reg = <0xe6bd0000 0x100>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 9f48141270b8..2c43c4d85dee 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -93,6 +93,14 @@ }; }; + base_fpga_region { + compatible = "fpga-region"; + fpga-mgr = <&fpgamgr0>; + + #address-cells = <0x1>; + #size-cells = <0x1>; + }; + can0: can@ffc00000 { compatible = "bosch,d_can"; reg = <0xffc00000 0x1000>; @@ -513,10 +521,24 @@ }; }; + fpga_bridge0: fpga_bridge@ff400000 { + compatible = "altr,socfpga-lwhps2fpga-bridge"; + reg = <0xff400000 0x100000>; + resets = <&rst LWHPS2FPGA_RESET>; + clocks = <&l4_main_clk>; + }; + + fpga_bridge1: fpga_bridge@ff500000 { + compatible = "altr,socfpga-hps2fpga-bridge"; + reg = <0xff500000 0x10000>; + resets = <&rst HPS2FPGA_RESET>; + clocks = <&l4_main_clk>; + }; + fpgamgr0: fpgamgr@ff706000 { compatible = "altr,socfpga-fpga-mgr"; reg = <0xff706000 0x1000 - 0xffb90000 0x1000>; + 0xffb90000 0x4>; interrupts = <0 175 4>; }; @@ -686,6 +708,17 @@ arm,data-latency = <2 1 1>; prefetch-data = <1>; prefetch-instr = <1>; + arm,shared-override; + arm,double-linefill = <1>; + arm,double-linefill-incr = <0>; + arm,double-linefill-wrap = <1>; + arm,prefetch-drop = <0>; + arm,prefetch-offset = <7>; + }; + + l3regs@0xff800000 { + compatible = "altr,l3regs", "syscon"; + reg = <0xff800000 0x1000>; }; mmc: dwmmc0@ff704000 { @@ -700,11 +733,38 @@ status = "disabled"; }; + nand0: nand@ff900000 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "denali,denali-nand-dt"; + reg = <0xff900000 0x100000>, + <0xffb80000 0x10000>; + reg-names = "nand_data", "denali_reg"; + interrupts = <0x0 0x90 0x4>; + dma-mask = <0xffffffff>; + clocks = <&nand_clk>; + status = "disabled"; + }; + ocram: sram@ffff0000 { compatible = "mmio-sram"; reg = <0xffff0000 0x10000>; }; + qspi: spi@ff705000 { + compatible = "cdns,qspi-nor"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xff705000 0x1000>, + <0xffa00000 0x1000>; + interrupts = <0 151 4>; + cdns,fifo-depth = <128>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x00000000>; + clocks = <&qspi_clk>; + status = "disabled"; + }; + rst: rstmgr@ffd05000 { #reset-cells = <1>; compatible = "altr,rst-mgr"; @@ -718,7 +778,7 @@ }; sdr: sdr@ffc25000 { - compatible = "syscon"; + compatible = "altr,sdr-ctl", "syscon"; reg = <0xffc25000 0x1000>; }; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index f520cbff5e1c..6b0b7463f36f 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -83,6 +83,14 @@ }; }; + base_fpga_region { + #address-cells = <0x1>; + #size-cells = <0x1>; + + compatible = "fpga-region"; + fpga-mgr = <&fpga_mgr>; + }; + clkmgr@ffd04000 { compatible = "altr,clk-mgr"; reg = <0xffd04000 0x1000>; @@ -400,6 +408,12 @@ }; }; + socfpga_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>; + snps,blen = <0 0 0 0 16 0 0>; + }; + gmac0: ethernet@ff800000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac"; altr,sysmgr-syscon = <&sysmgr 0x44 0>; @@ -416,6 +430,7 @@ clock-names = "stmmaceth"; resets = <&rst EMAC0_RESET>; reset-names = "stmmaceth"; + snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; @@ -435,6 +450,7 @@ clock-names = "stmmaceth"; resets = <&rst EMAC1_RESET>; reset-names = "stmmaceth"; + snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; @@ -452,6 +468,7 @@ rx-fifo-depth = <16384>; clocks = <&l4_mp_clk>; clock-names = "stmmaceth"; + snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; @@ -512,6 +529,15 @@ }; }; + fpga_mgr: fpga-mgr@ffd03000 { + compatible = "altr,socfpga-a10-fpga-mgr"; + reg = <0xffd03000 0x100 + 0xffcfe400 0x20>; + clocks = <&l4_mp_clk>; + resets = <&rst FPGAMGR_RESET>; + reset-names = "fpgamgr"; + }; + i2c0: i2c@ffc02200 { #address-cells = <1>; #size-cells = <0>; @@ -562,8 +588,23 @@ status = "disabled"; }; + spi1: spi@ffda5000 { + compatible = "snps,dw-apb-ssi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xffda5000 0x100>; + interrupts = <0 102 4>; + num-chipselect = <4>; + bus-num = <0>; + /*32bit_access;*/ + tx-dma-channel = <&pdma 16>; + rx-dma-channel = <&pdma 17>; + clocks = <&spi_m_clk>; + status = "disabled"; + }; + sdr: sdr@ffc25000 { - compatible = "syscon"; + compatible = "altr,sdr-ctl", "syscon"; reg = <0xffcfb100 0x80>; }; @@ -573,6 +614,9 @@ interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>; cache-unified; cache-level = <2>; + prefetch-data = <1>; + prefetch-instr = <1>; + arm,shared-override; }; mmc: dwmmc0@ff808000 { @@ -587,6 +631,19 @@ status = "disabled"; }; + nand: nand@ffb90000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "denali,denali-nand-dt", "altr,socfpga-denali-nand"; + reg = <0xffb90000 0x72000>, + <0xffb80000 0x10000>; + reg-names = "nand_data", "denali_reg"; + interrupts = <0 99 4>; + dma-mask = <0xffffffff>; + clocks = <&nand_clk>; + status = "disabled"; + }; + ocram: sram@ffe00000 { compatible = "mmio-sram"; reg = <0xffe00000 0x40000>; @@ -657,6 +714,20 @@ }; }; + qspi: spi@ff809000 { + compatible = "cdns,qspi-nor"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xff809000 0x100>, + <0xffa00000 0x100000>; + interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <128>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x00000000>; + clocks = <&qspi_clk>; + status = "disabled"; + }; + rst: rstmgr@ffd05000 { #reset-cells = <1>; compatible = "altr,rst-mgr"; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi index 8e3a4adc389f..c57e6cea0d83 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi @@ -36,6 +36,30 @@ reg = <0x0 0x40000000>; /* 1GB */ }; + a10leds { + compatible = "gpio-leds"; + + a10sr_led0 { + label = "a10sr-led0"; + gpios = <&a10sr_gpio 0 1>; + }; + + a10sr_led1 { + label = "a10sr-led1"; + gpios = <&a10sr_gpio 1 1>; + }; + + a10sr_led2 { + label = "a10sr-led2"; + gpios = <&a10sr_gpio 2 1>; + }; + + a10sr_led3 { + label = "a10sr-led3"; + gpios = <&a10sr_gpio 3 1>; + }; + }; + soc { clkmgr@ffd04000 { clocks { @@ -75,6 +99,31 @@ status = "okay"; }; +&gpio1 { + status = "okay"; +}; + +&spi1 { + status = "okay"; + + resource-manager@0 { + compatible = "altr,a10sr"; + reg = <0>; + spi-max-frequency = <100000>; + /* low-level active IRQ at GPIO1_5 */ + interrupt-parent = <&portb>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + a10sr_gpio: gpio-controller { + compatible = "altr,a10sr-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + }; +}; + &i2c1 { speed-mode = <0>; status = "okay"; @@ -96,6 +145,11 @@ compatible = "dallas,ds1339"; reg = <0x68>; }; + + ltc@5c { + compatible = "ltc2977"; + reg = <0x5c>; + }; }; &uart1 { @@ -105,3 +159,7 @@ &usb0 { status = "okay"; }; + +&watchdog1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts new file mode 100644 index 000000000000..d14f9ccb6e10 --- /dev/null +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2015 Altera Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/dts-v1/; +#include "socfpga_arria10_socdk.dtsi" + +&nand { + status = "okay"; + + partition@nand-boot { + label = "Boot and fpga data"; + reg = <0x0 0x1C00000>; + }; + partition@nand-rootfs { + label = "Root Filesystem - JFFS2"; + reg = <0x1C00000 0x6400000>; + }; +}; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts new file mode 100644 index 000000000000..beb2fc6b9eb6 --- /dev/null +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2016 Intel. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/dts-v1/; +#include "socfpga_arria10_socdk.dtsi" + +&qspi { + status = "okay"; + + flash0: n25q00@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q00aa"; + reg = <0>; + spi-max-frequency = <100000000>; + + m25p,fast-read; + cdns,page-size = <256>; + cdns,block-size = <16>; + cdns,read-delay = <4>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + + partition@qspi-boot { + label = "Boot and fpga data"; + reg = <0x0 0x2720000>; + }; + + partition@qspi-rootfs { + label = "Root Filesystem - JFFS2"; + reg = <0x2720000 0x58E0000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi index 1907cc600452..8c037297296c 100644 --- a/arch/arm/boot/dts/socfpga_arria5.dtsi +++ b/arch/arm/boot/dts/socfpga_arria5.dtsi @@ -42,3 +42,7 @@ }; }; }; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts index 3c8867862b0d..8672edf9ba4e 100644 --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts @@ -39,6 +39,29 @@ ethernet0 = &gmac1; }; + leds { + compatible = "gpio-leds"; + hps0 { + label = "hps_led0"; + gpios = <&porta 0 1>; + }; + + hps1 { + label = "hps_led1"; + gpios = <&portb 11 1>; + }; + + hps2 { + label = "hps_led2"; + gpios = <&porta 17 1>; + }; + + hps3 { + label = "hps_led3"; + gpios = <&porta 18 1>; + }; + }; + regulator_3_3v: 3-3-v-regulator { compatible = "regulator-fixed"; regulator-name = "3.3V"; @@ -61,8 +84,28 @@ rxc-skew-ps = <2000>; }; +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + &i2c0 { status = "okay"; + clock-frequency = <100000>; + + /* + * adjust the falling times to decrease the i2c frequency to 50Khz + * because the LCD module does not work at the standard 100Khz + */ + i2c-sda-falling-time-ns = <5000>; + i2c-scl-falling-time-ns = <5000>; eeprom@51 { compatible = "atmel,24c32"; @@ -82,6 +125,39 @@ status = "okay"; }; +&qspi { + status = "okay"; + + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q256a"; + reg = <0>; + spi-max-frequency = <100000000>; + + m25p,fast-read; + cdns,page-size = <256>; + cdns,block-size = <16>; + cdns,read-delay = <4>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + + partition@qspi-boot { + /* 8MB for raw data. */ + label = "Flash 0 Raw Data"; + reg = <0x0 0x800000>; + }; + + partition@qspi-rootfs { + /* 120MB for jffs2 data. */ + label = "Flash 0 jffs2 Filesystem"; + reg = <0x800000 0x7800000>; + }; + }; +}; + &usb1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts index afea3645ada4..5ecd2ef405e3 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts @@ -18,7 +18,7 @@ / { model = "Terasic DE-0(Atlas)"; - compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + compatible = "terasic,de0-atlas", "altr,socfpga-cyclone5", "altr,socfpga"; chosen { bootargs = "earlyprintk"; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi index f86f9c060d7a..6ad3b1eb9b86 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi +++ b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi @@ -18,7 +18,7 @@ #include "socfpga_cyclone5.dtsi" / { - model = "DENX MCV"; + model = "Aries/DENX MCV"; compatible = "altr,socfpga-cyclone5", "altr,socfpga"; memory { diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts index 7186a29b8b86..e5a98e5696ca 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts @@ -18,8 +18,8 @@ #include "socfpga_cyclone5_mcv.dtsi" / { - model = "DENX MCV EVK"; - compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + model = "Aries/DENX MCV EVK"; + compatible = "denx,mcvevk", "altr,socfpga-cyclone5", "altr,socfpga"; aliases { ethernet0 = &gmac0; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts index 15e43f43f244..7ea32c81e720 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts @@ -19,7 +19,7 @@ / { model = "Altera SOCFPGA Cyclone V SoC Development Kit"; - compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + compatible = "altr,socfpga-cyclone5-socdk", "altr,socfpga-cyclone5", "altr,socfpga"; chosen { bootargs = "earlyprintk"; @@ -39,6 +39,29 @@ ethernet0 = &gmac1; }; + leds { + compatible = "gpio-leds"; + hps0 { + label = "hps_led0"; + gpios = <&portb 15 1>; + }; + + hps1 { + label = "hps_led1"; + gpios = <&portb 14 1>; + }; + + hps2 { + label = "hps_led2"; + gpios = <&portb 13 1>; + }; + + hps3 { + label = "hps_led3"; + gpios = <&portb 12 1>; + }; + }; + regulator_3_3v: 3-3-v-regulator { compatible = "regulator-fixed"; regulator-name = "3.3V"; @@ -47,6 +70,10 @@ }; }; +&can0 { + status = "okay"; +}; + &gmac1 { status = "okay"; phy-mode = "rgmii"; @@ -61,12 +88,28 @@ rxc-skew-ps = <2000>; }; +&gpio0 { + status = "okay"; +}; + &gpio1 { status = "okay"; }; +&gpio2 { + status = "okay"; +}; + &i2c0 { status = "okay"; + clock-frequency = <100000>; + + /* + * adjust the falling times to decrease the i2c frequency to 50Khz + * because the LCD module does not work at the standard 100Khz + */ + i2c-sda-falling-time-ns = <5000>; + i2c-scl-falling-time-ns = <5000>; eeprom@51 { compatible = "atmel,24c32"; @@ -87,6 +130,49 @@ status = "okay"; }; +&qspi { + status = "okay"; + + flash0: n25q00@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q00"; + reg = <0>; /* chip select */ + spi-max-frequency = <100000000>; + + m25p,fast-read; + cdns,page-size = <256>; + cdns,block-size = <16>; + cdns,read-delay = <4>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + + partition@qspi-boot { + /* 8MB for raw data. */ + label = "Flash 0 Raw Data"; + reg = <0x0 0x800000>; + }; + + partition@qspi-rootfs { + /* 120MB for jffs2 data. */ + label = "Flash 0 jffs2 Filesystem"; + reg = <0x800000 0x7800000>; + }; + }; +}; + +&spi0 { + status = "okay"; + + spidev@0 { + compatible = "rohm,dh2228fv"; + reg = <0>; + spi-max-frequency = <1000000>; + }; +}; + &usb1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts index 02e22f554ef0..a0c90b3bdfd1 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts @@ -19,7 +19,7 @@ / { model = "Terasic SoCkit"; - compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + compatible = "terasic,socfpga-cyclone5-sockit", "altr,socfpga-cyclone5", "altr,socfpga"; chosen { bootargs = "earlyprintk"; @@ -175,6 +175,27 @@ status = "okay"; }; +&qspi { + status = "okay"; + + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q00"; + reg = <0>; + spi-max-frequency = <100000000>; + + m25p,fast-read; + cdns,page-size = <256>; + cdns,block-size = <16>; + cdns,read-delay = <4>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + }; +}; + &usb1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts index d79853775061..c3d52f27b21e 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts @@ -80,3 +80,22 @@ &mmc { status = "okay"; }; + +&qspi { + status = "okay"; + + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q256a"; + reg = <0>; + spi-max-frequency = <100000000>; + m25p,fast-read; + cdns,read-delay = <4>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts new file mode 100644 index 000000000000..5b7e3c27e6e9 --- /dev/null +++ b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts @@ -0,0 +1,123 @@ +/* + * Copyright (C) 2016 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "socfpga_cyclone5.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Altera SOCFPGA Cyclone V SoC Macnica Sodia board"; + compatible = "macnica,sodia", "altr,socfpga-cyclone5", "altr,socfpga"; + + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + aliases { + ethernet0 = &gmac1; + }; + + regulator_3_3v: 3-3-v-regulator { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + leds: gpio-leds { + compatible = "gpio-leds"; + + hps_led0 { + label = "hps:green:led0"; + gpios = <&portb 12 GPIO_ACTIVE_LOW>; + }; + + hps_led1 { + label = "hps:green:led1"; + gpios = <&portb 13 GPIO_ACTIVE_LOW>; + }; + + hps_led2 { + label = "hps:green:led2"; + gpios = <&portb 14 GPIO_ACTIVE_LOW>; + }; + + hps_led3 { + label = "hps:green:led3"; + gpios = <&portb 15 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gmac1 { + status = "okay"; + phy-mode = "rgmii"; + phy = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@0 { + reg = <0>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + rxdv-skew-ps = <0>; + rxc-skew-ps = <3000>; + txen-skew-ps = <0>; + txc-skew-ps = <3000>; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&mmc0 { + cd-gpios = <&portb 18 0>; + vmmc-supply = <®ulator_3_3v>; + vqmmc-supply = <®ulator_3_3v>; + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts index b844473601d2..363ee62457fe 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts @@ -51,7 +51,7 @@ / { model = "samtec VIN|ING FPGA"; - compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + compatible = "samtec,vining", "altr,socfpga-cyclone5", "altr,socfpga"; chosen { bootargs = "console=ttyS0,115200"; diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index 449acf0d8272..17ea0abcdbd7 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -118,6 +118,7 @@ block_size = <0xfff>; dma-masters = <2>; data-width = <8 8>; + multi-block = <1 1 1 1 1 1 1 1>; }; dma@eb000000 { @@ -134,6 +135,7 @@ chan_priority = <1>; block_size = <0xfff>; data-width = <8 8>; + multi-block = <1 1 1 1 1 1 1 1>; }; fsmc: flash@b0000000 { diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index d309314f3a36..82d8c4771293 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -669,6 +669,8 @@ vddulpivio18-supply = <&ab8500_ldo_intcore_reg>; v-ape-supply = <&db8500_vape_reg>; musb_1v8-supply = <&db8500_vsmps2_reg>; + clocks = <&prcmu_clk PRCMU_SYSCLK>; + clock-names = "sysclk"; }; ab8500-ponkey { diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 48dc38482633..f37f9e10713c 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -19,12 +19,6 @@ }; soc { - usb_per5@a03e0000 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&musb_default_mode>; - pinctrl-1 = <&musb_sleep_mode>; - }; - uart@80120000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart0_default_mode>; @@ -111,6 +105,7 @@ pinctrl-1 = <&i2c3_sleep_mode>; }; + /* ST6G3244ME level translator for 1.8/2.9 V */ vmmci: regulator-gpio { compatible = "regulator-gpio"; @@ -120,7 +115,6 @@ regulator-type = "voltage"; startup-delay-us = <100>; - enable-active-high; states = <1800000 0x1 2900000 0x0>; @@ -197,6 +191,8 @@ stericsson,cpu-dai = <&msp1 &msp3>; stericsson,audio-codec = <&codec>; + clocks = <&prcmu_clk PRCMU_SYSCLK>; + clock-names = "sysclk"; }; msp0: msp@80123000 { @@ -225,6 +221,12 @@ ab8500-gpio { }; + ab8500_usb { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&musb_default_mode>; + pinctrl-1 = <&musb_sleep_mode>; + }; + ab8500-regulators { ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-name = "V-DISPLAY"; diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi index ece222d51717..5882a2606ac3 100644 --- a/arch/arm/boot/dts/ste-hrefprev60.dtsi +++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi @@ -74,6 +74,7 @@ vmmci: regulator-gpio { gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>; enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>; + enable-active-high; }; pinctrl { diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index 7187676836be..bf259bbd1d0a 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -146,6 +146,7 @@ vmmci: regulator-gpio { gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; + enable-active-high; }; pinctrl { diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 386eee6de232..dd5514def604 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -159,17 +159,13 @@ "", "", "", "", "", "", "", ""; }; - usb_per5@a03e0000 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&musb_default_mode>; - pinctrl-1 = <&musb_sleep_mode>; - }; - sound { compatible = "stericsson,snd-soc-mop500"; stericsson,cpu-dai = <&msp1 &msp3>; stericsson,audio-codec = <&codec>; + clocks = <&prcmu_clk PRCMU_SYSCLK>; + clock-names = "sysclk"; }; msp0: msp@80123000 { @@ -216,11 +212,15 @@ }; }; + /* ST6G3244ME level translator for 1.8/2.9 V */ vmmci: regulator-gpio { compatible = "regulator-gpio"; + /* GPIO228 SD_SEL */ gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>; + /* GPIO217 MMC_EN */ enable-gpio = <&gpio6 25 GPIO_ACTIVE_HIGH>; + enable-active-high; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2900000>; @@ -228,7 +228,6 @@ regulator-type = "voltage"; startup-delay-us = <100>; - enable-active-high; states = <1800000 0x1 2900000 0x0>; @@ -448,6 +447,12 @@ "PM_GPIO42"; /* AB8500 GPIO42 */ }; + ab8500_usb { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&musb_default_mode>; + pinctrl-1 = <&musb_sleep_mode>; + }; + ext_regulators: ab8500-ext-regulators { ab8500_ext1_reg: ab8500_ext1 { regulator-name = "ab8500-ext-supply1"; @@ -546,6 +551,7 @@ sdi0_default_mode: sdi0_default { snowball_mux { function = "mc0"; + /* Add the DAT31 pin even if it is not really used */ groups = "mc0dat31dir_a_1"; }; snowball_cfg1 { diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi index 13029c03d7c6..34c119a66f14 100644 --- a/arch/arm/boot/dts/stih407-clock.dtsi +++ b/arch/arm/boot/dts/stih407-clock.dtsi @@ -101,6 +101,7 @@ clocks = <&clk_sysin>; clock-output-names = "clk-s-a0-pll-ofd-0"; + clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */ }; clk_s_a0_flexgen: clk-s-a0-flexgen { @@ -112,6 +113,7 @@ <&clk_sysin>; clock-output-names = "clk-ic-lmi0"; + clock-critical = <CLK_IC_LMI0>; }; }; @@ -126,6 +128,7 @@ "clk-s-c0-fs0-ch1", "clk-s-c0-fs0-ch2", "clk-s-c0-fs0-ch3"; + clock-critical = <0>; /* clk-s-c0-fs0-ch0 */ }; clk_s_c0: clockgen-c@09103000 { @@ -139,6 +142,7 @@ clocks = <&clk_sysin>; clock-output-names = "clk-s-c0-pll0-odf-0"; + clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */ }; clk_s_c0_pll1: clk-s-c0-pll1 { @@ -194,6 +198,12 @@ "clk-main-disp", "clk-aux-disp", "clk-compo-dvp"; + clock-critical = <CLK_PROC_STFE>, + <CLK_ICN_CPU>, + <CLK_TX_ICN_DMU>, + <CLK_EXT2F_A9>, + <CLK_ICN_LMI>, + <CLK_ICN_SBC>; }; }; diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 8f79b4147bba..d753ac36788f 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -20,30 +20,15 @@ #size-cells = <1>; ranges; - gp0_reserved: rproc@40000000 { + gp0_reserved: rproc@45000000 { compatible = "shared-dma-pool"; - reg = <0x40000000 0x01000000>; + reg = <0x45000000 0x00400000>; no-map; - status = "disabled"; - }; - - gp1_reserved: rproc@41000000 { - compatible = "shared-dma-pool"; - reg = <0x41000000 0x01000000>; - no-map; - status = "disabled"; - }; - - audio_reserved: rproc@42000000 { - compatible = "shared-dma-pool"; - reg = <0x42000000 0x01000000>; - no-map; - status = "disabled"; }; - dmu_reserved: rproc@43000000 { + delta_reserved: rproc@44000000 { compatible = "shared-dma-pool"; - reg = <0x43000000 0x01000000>; + reg = <0x44000000 0x01000000>; no-map; }; }; @@ -222,9 +207,8 @@ compatible = "st,asc"; reg = <0x9830000 0x2c>; interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_serial0>; clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + /* Pinctrl moved out to a per-board configuration */ status = "disabled"; }; @@ -680,6 +664,7 @@ phy-names = "usb2-phy", "usb3-phy"; phys = <&usb2_picophy0>, <&phy_port2 PHY_TYPE_USB3>; + snps,dis_u3_susphy_quirk; }; }; @@ -703,6 +688,7 @@ compatible = "st,sti-pwm"; #pwm-cells = <2>; reg = <0x9510000 0x68>; + interrupts = <GIC_SPI 131 IRQ_TYPE_NONE>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1_chan0_default &pinctrl_pwm1_chan1_default @@ -823,37 +809,22 @@ clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>; clock-frequency = <600000000>; st,syscfg = <&syscfg_core 0x22c>; + #mbox-cells = <1>; + mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx"; + mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>; }; - - st231_gp1: remote-processor { - compatible = "st,st231-rproc"; - memory-region = <&gp1_reserved>; - resets = <&softreset STIH407_ST231_GP1_SOFTRESET>; - reset-names = "sw_reset"; - clocks = <&clk_s_c0_flexgen CLK_ST231_GP_1>; - clock-frequency = <600000000>; - st,syscfg = <&syscfg_core 0x220>; - }; - - st231_audio: remote-processor { - compatible = "st,st231-rproc"; - memory-region = <&audio_reserved>; - resets = <&softreset STIH407_ST231_AUD_SOFTRESET>; - reset-names = "sw_reset"; - clocks = <&clk_s_c0_flexgen CLK_ST231_AUD_0>; - clock-frequency = <600000000>; - st,syscfg = <&syscfg_core 0x228>; - }; - - st231_dmu: remote-processor { + st231_delta: remote-processor { compatible = "st,st231-rproc"; - memory-region = <&dmu_reserved>; + memory-region = <&delta_reserved>; resets = <&softreset STIH407_ST231_DMU_SOFTRESET>; reset-names = "sw_reset"; clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>; clock-frequency = <600000000>; st,syscfg = <&syscfg_core 0x224>; + #mbox-cells = <1>; + mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx"; + mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>; }; /* fdma audio */ @@ -889,6 +860,8 @@ interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; dma-channels = <16>; #dma-cells = <3>; + + status = "disabled"; }; /* fdma free running */ @@ -906,6 +879,8 @@ <&clk_s_c0_flexgen CLK_EXT2F_A9>, <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, <&clk_s_c0_flexgen CLK_EXT2F_A9>; + + status = "disabled"; }; sti_sasg_codec: sti-sasg-codec { @@ -916,7 +891,7 @@ }; sti_uni_player0: sti-uni-player@8d80000 { - compatible = "st,sti-uni-player"; + compatible = "st,stih407-uni-player-hdmi"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; clocks = <&clk_s_d0_flexgen CLK_PCM_0>; @@ -926,17 +901,13 @@ reg = <0x8d80000 0x158>; interrupts = <GIC_SPI 84 IRQ_TYPE_NONE>; dmas = <&fdma0 2 0 1>; - dai-name = "Uni Player #0 (HDMI)"; dma-names = "tx"; - st,uniperiph-id = <0>; - st,version = <5>; - st,mode = "HDMI"; status = "disabled"; }; sti_uni_player1: sti-uni-player@8d81000 { - compatible = "st,sti-uni-player"; + compatible = "st,stih407-uni-player-pcm-out"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; clocks = <&clk_s_d0_flexgen CLK_PCM_1>; @@ -946,17 +917,13 @@ reg = <0x8d81000 0x158>; interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>; dmas = <&fdma0 3 0 1>; - dai-name = "Uni Player #1 (PIO)"; dma-names = "tx"; - st,uniperiph-id = <1>; - st,version = <5>; - st,mode = "PCM"; status = "disabled"; }; sti_uni_player2: sti-uni-player@8d82000 { - compatible = "st,sti-uni-player"; + compatible = "st,stih407-uni-player-dac"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; clocks = <&clk_s_d0_flexgen CLK_PCM_2>; @@ -966,17 +933,13 @@ reg = <0x8d82000 0x158>; interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>; dmas = <&fdma0 4 0 1>; - dai-name = "Uni Player #1 (DAC)"; dma-names = "tx"; - st,uniperiph-id = <2>; - st,version = <5>; - st,mode = "PCM"; status = "disabled"; }; sti_uni_player3: sti-uni-player@8d85000 { - compatible = "st,sti-uni-player"; + compatible = "st,stih407-uni-player-spdif"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; clocks = <&clk_s_d0_flexgen CLK_SPDIFF>; @@ -987,40 +950,42 @@ interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>; dmas = <&fdma0 7 0 1>; dma-names = "tx"; - dai-name = "Uni Player #1 (PIO)"; - st,uniperiph-id = <3>; - st,version = <5>; - st,mode = "SPDIF"; status = "disabled"; }; sti_uni_reader0: sti-uni-reader@8d83000 { - compatible = "st,sti-uni-reader"; + compatible = "st,stih407-uni-reader-pcm_in"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; reg = <0x8d83000 0x158>; interrupts = <GIC_SPI 87 IRQ_TYPE_NONE>; dmas = <&fdma0 5 0 1>; dma-names = "rx"; - dai-name = "Uni Reader #0 (PCM IN)"; - st,version = <3>; status = "disabled"; }; sti_uni_reader1: sti-uni-reader@8d84000 { - compatible = "st,sti-uni-reader"; + compatible = "st,stih407-uni-reader-hdmi"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; reg = <0x8d84000 0x158>; interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>; dmas = <&fdma0 6 0 1>; dma-names = "rx"; - dai-name = "Uni Reader #1 (HDMI RX)"; - st,version = <3>; status = "disabled"; }; + + delta0 { + compatible = "st,st-delta"; + clock-names = "delta", + "delta-st231", + "delta-flash-promip"; + clocks = <&clk_s_c0_flexgen CLK_VID_DMU>, + <&clk_s_c0_flexgen CLK_ST231_DMU>, + <&clk_s_c0_flexgen CLK_FLASH_PROMIP>; + }; }; }; diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index c325cc059ae4..bd1a82e8fffe 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -465,8 +465,16 @@ serial0 { pinctrl_serial0: serial0-0 { st,pins { - tx = <&pio17 0 ALT1 OUT>; - rx = <&pio17 1 ALT1 IN>; + tx = <&pio17 0 ALT1 OUT>; + rx = <&pio17 1 ALT1 IN>; + }; + }; + pinctrl_serial0_hw_flowctrl: serial0-0_hw_flowctrl { + st,pins { + tx = <&pio17 0 ALT1 OUT>; + rx = <&pio17 1 ALT1 IN>; + cts = <&pio17 2 ALT1 IN>; + rts = <&pio17 3 ALT1 OUT>; }; }; }; @@ -1157,7 +1165,7 @@ reg = <0x0923f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0x09230000 0x3000>; pio40: gpio@09230000 { diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi index 291ffacbd2e0..fa149837df14 100644 --- a/arch/arm/boot/dts/stih407.dtsi +++ b/arch/arm/boot/dts/stih407.dtsi @@ -102,7 +102,7 @@ <&clk_s_d2_quadfs 0>; }; - sti-hdmi@8d04000 { + sti_hdmi: sti-hdmi@8d04000 { compatible = "st,stih407-hdmi"; reg = <0x8d04000 0x1000>; reg-names = "hdmi-reg"; diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts index 118ac284fc4b..83313b51915d 100644 --- a/arch/arm/boot/dts/stih410-b2120.dts +++ b/arch/arm/boot/dts/stih410-b2120.dts @@ -60,5 +60,11 @@ ehci1: usb@9a83e00 { status = "okay"; }; + + sti-display-subsystem { + sti-hda@8d02000 { + status = "okay"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts index 7fb507fcba7e..93c14d183e29 100644 --- a/arch/arm/boot/dts/stih410-b2260.dts +++ b/arch/arm/boot/dts/stih410-b2260.dts @@ -62,6 +62,11 @@ /* Low speed expansion connector */ uart0: serial@9830000 { label = "LS-UART0"; + pinctrl-names = "default", "no-hw-flowctrl"; + pinctrl-0 = <&pinctrl_serial0_hw_flowctrl>; + pinctrl-1 = <&pinctrl_serial0>; + rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; }; @@ -165,6 +170,9 @@ status = "okay"; }; + sti_uni_player0: sti-uni-player@8d80000 { + status = "okay"; + }; /* SSC11 to HDMI */ hdmiddc: i2c@9541000 { /* HDMI V1.3a supports Standard mode only */ @@ -174,9 +182,22 @@ status = "okay"; }; - sti-display-subsystem { - sti_hdmi: sti-hdmi@8d04000 { - status = "okay"; + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "STI-B2260"; + status = "okay"; + + simple-audio-card,dai-link@0 { + /* DAC */ + format = "i2s"; + mclk-fs = <128>; + cpu { + sound-dai = <&sti_uni_player0>; + }; + + codec { + sound-dai = <&sti_hdmi>; + }; }; }; diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi index 8598effd6c01..07c8ef9d77f6 100644 --- a/arch/arm/boot/dts/stih410-clock.dtsi +++ b/arch/arm/boot/dts/stih410-clock.dtsi @@ -208,7 +208,8 @@ "clk-clust-hades", "clk-hwpe-hades", "clk-fc-hades"; - clock-critical = <CLK_ICN_CPU>, + clock-critical = <CLK_PROC_STFE>, + <CLK_ICN_CPU>, <CLK_TX_ICN_DMU>, <CLK_EXT2F_A9>, <CLK_ICN_LMI>, diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index a3ef7341c051..3c9672c5b09f 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -131,7 +131,7 @@ <&clk_s_d2_quadfs 0>; assigned-clock-rates = <297000000>, - <108000000>, + <297000000>, <0>, <400000000>, <400000000>; @@ -193,7 +193,7 @@ <&clk_s_d2_quadfs 0>; }; - sti-hdmi@8d04000 { + sti_hdmi: sti-hdmi@8d04000 { compatible = "st,stih407-hdmi"; reg = <0x8d04000 0x1000>; reg-names = "hdmi-reg"; @@ -221,6 +221,7 @@ sti-hda@8d02000 { compatible = "st,stih407-hda"; + status = "disabled"; reg = <0x8d02000 0x400>, <0x92b0120 0x4>; reg-names = "hda-reg", "video-dacs-ctrl"; clock-names = "pix", @@ -232,6 +233,17 @@ <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>; }; + + sti-hqvdp@9c000000 { + compatible = "st,stih407-hqvdp"; + reg = <0x9C00000 0x100000>; + clock-names = "hqvdp", "pix_main"; + clocks = <&clk_s_c0_flexgen CLK_MAIN_DISP>, + <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>; + reset-names = "hqvdp"; + resets = <&softreset STIH407_HDQVDP_SOFTRESET>; + st,vtg = <&vtg_main>; + }; }; bdisp0:bdisp@9f10000 { @@ -259,5 +271,15 @@ clocks = <&clk_sysin>; interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>; }; + + delta0 { + compatible = "st,st-delta"; + clock-names = "delta", + "delta-st231", + "delta-flash-promip"; + clocks = <&clk_s_c0_flexgen CLK_VID_DMU>, + <&clk_s_c0_flexgen CLK_ST231_DMU>, + <&clk_s_c0_flexgen CLK_FLASH_PROMIP>; + }; }; }; diff --git a/arch/arm/boot/dts/stih415-b2000.dts b/arch/arm/boot/dts/stih415-b2000.dts deleted file mode 100644 index bdfbd3765db2..000000000000 --- a/arch/arm/boot/dts/stih415-b2000.dts +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics (R&D) Limited. - * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -/dts-v1/; -#include "stih415.dtsi" -#include "stih41x-b2000.dtsi" -/ { - model = "STiH415 B2000 Board"; - compatible = "st,stih415-b2000", "st,stih415"; -}; diff --git a/arch/arm/boot/dts/stih415-b2020.dts b/arch/arm/boot/dts/stih415-b2020.dts deleted file mode 100644 index 71903a87bd31..000000000000 --- a/arch/arm/boot/dts/stih415-b2020.dts +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics (R&D) Limited. - * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -/dts-v1/; -#include "stih415.dtsi" -#include "stih41x-b2020.dtsi" -/ { - model = "STiH415 B2020 Board"; - compatible = "st,stih415-b2020", "st,stih415"; -}; diff --git a/arch/arm/boot/dts/stih415-clock.dtsi b/arch/arm/boot/dts/stih415-clock.dtsi deleted file mode 100644 index 3ee34514bc4b..000000000000 --- a/arch/arm/boot/dts/stih415-clock.dtsi +++ /dev/null @@ -1,533 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics (R&D) Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <dt-bindings/clock/stih415-clks.h> - -/ { - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* - * Fixed 30MHz oscillator input to SoC - */ - clk_sysin: clk-sysin { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <30000000>; - }; - - /* - * ClockGenAs on SASG1 - */ - clockgen-a@fee62000 { - reg = <0xfee62000 0xb48>; - - clk_s_a0_pll: clk-s-a0-pll { - #clock-cells = <1>; - compatible = "st,clkgena-plls-c65"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-s-a0-pll0-hs", - "clk-s-a0-pll0-ls", - "clk-s-a0-pll1"; - }; - - clk_s_a0_osc_prediv: clk-s-a0-osc-prediv { - #clock-cells = <0>; - compatible = "st,clkgena-prediv-c65", - "st,clkgena-prediv"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-s-a0-osc-prediv"; - }; - - clk_s_a0_hs: clk-s-a0-hs { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c65-hs", - "st,clkgena-divmux"; - - clocks = <&clk_s_a0_osc_prediv>, - <&clk_s_a0_pll 0>, /* PLL0 HS */ - <&clk_s_a0_pll 2>; /* PLL1 */ - - clock-output-names = "clk-s-fdma-0", - "clk-s-fdma-1", - ""; /* clk-s-jit-sense */ - /* Fourth output unused */ - }; - - clk_s_a0_ls: clk-s-a0-ls { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c65-ls", - "st,clkgena-divmux"; - - clocks = <&clk_s_a0_osc_prediv>, - <&clk_s_a0_pll 1>, /* PLL0 LS */ - <&clk_s_a0_pll 2>; /* PLL1 */ - - clock-output-names = "clk-s-icn-reg-0", - "clk-s-icn-if-0", - "clk-s-icn-reg-lp-0", - "clk-s-emiss", - "clk-s-eth1-phy", - "clk-s-mii-ref-out"; - /* Remaining outputs unused */ - }; - }; - - clockgen-a@fee81000 { - reg = <0xfee81000 0xb48>; - - clk_s_a1_pll: clk-s-a1-pll { - #clock-cells = <1>; - compatible = "st,clkgena-plls-c65"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-s-a1-pll0-hs", - "clk-s-a1-pll0-ls", - "clk-s-a1-pll1"; - }; - - clk_s_a1_osc_prediv: clk-s-a1-osc-prediv { - #clock-cells = <0>; - compatible = "st,clkgena-prediv-c65", - "st,clkgena-prediv"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-s-a1-osc-prediv"; - }; - - clk_s_a1_hs: clk-s-a1-hs { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c65-hs", - "st,clkgena-divmux"; - - clocks = <&clk_s_a1_osc_prediv>, - <&clk_s_a1_pll 0>, /* PLL0 HS */ - <&clk_s_a1_pll 2>; /* PLL1 */ - - clock-output-names = "", /* Reserved */ - "", /* Reserved */ - "clk-s-stac-phy", - "clk-s-vtac-tx-phy"; - }; - - clk_s_a1_ls: clk-s-a1-ls { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c65-ls", - "st,clkgena-divmux"; - - clocks = <&clk_s_a1_osc_prediv>, - <&clk_s_a1_pll 1>, /* PLL0 LS */ - <&clk_s_a1_pll 2>; /* PLL1 */ - - clock-output-names = "clk-s-icn-if-2", - "clk-s-card-mmc", - "clk-s-icn-if-1", - "clk-s-gmac0-phy", - "clk-s-nand-ctrl", - "", /* Reserved */ - "clk-s-mii0-ref-out", - ""; /* clk-s-stac-sys */ - /* Remaining outputs unused */ - }; - }; - - /* - * ClockGenAs on MPE41 - */ - clockgen-a@fde12000 { - reg = <0xfde12000 0xb50>; - - clk_m_a0_pll0: clk-m-a0-pll0 { - #clock-cells = <1>; - compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a0-pll0-phi0", - "clk-m-a0-pll0-phi1", - "clk-m-a0-pll0-phi2", - "clk-m-a0-pll0-phi3"; - }; - - clk_m_a0_pll1: clk-m-a0-pll1 { - #clock-cells = <1>; - compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a0-pll1-phi0", - "clk-m-a0-pll1-phi1", - "clk-m-a0-pll1-phi2", - "clk-m-a0-pll1-phi3"; - }; - - clk_m_a0_osc_prediv: clk-m-a0-osc-prediv { - #clock-cells = <0>; - compatible = "st,clkgena-prediv-c32", - "st,clkgena-prediv"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a0-osc-prediv"; - }; - - clk_m_a0_div0: clk-m-a0-div0 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf0", - "st,clkgena-divmux"; - - clocks = <&clk_m_a0_osc_prediv>, - <&clk_m_a0_pll0 0>, /* PLL0 PHI0 */ - <&clk_m_a0_pll1 0>; /* PLL1 PHI0 */ - - clock-output-names = "clk-m-apb-pm", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "clk-m-pp-dmu-0", - "clk-m-pp-dmu-1", - "clk-m-icm-disp", - ""; /* Unused */ - }; - - clk_m_a0_div1: clk-m-a0-div1 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf1", - "st,clkgena-divmux"; - - clocks = <&clk_m_a0_osc_prediv>, - <&clk_m_a0_pll0 1>, /* PLL0 PHI1 */ - <&clk_m_a0_pll1 1>; /* PLL1 PHI1 */ - - clock-output-names = "", /* Unused */ - "", /* Unused */ - "clk-m-a9-ext2f", - "clk-m-st40rt", - "clk-m-st231-dmu-0", - "clk-m-st231-dmu-1", - "clk-m-st231-aud", - "clk-m-st231-gp-0"; - }; - - clk_m_a0_div2: clk-m-a0-div2 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf2", - "st,clkgena-divmux"; - - clocks = <&clk_m_a0_osc_prediv>, - <&clk_m_a0_pll0 2>, /* PLL0 PHI2 */ - <&clk_m_a0_pll1 2>; /* PLL1 PHI2 */ - - clock-output-names = "clk-m-st231-gp-1", - "clk-m-icn-cpu", - "clk-m-icn-stac", - "clk-m-icn-dmu-0", - "clk-m-icn-dmu-1", - "", /* Unused */ - "", /* Unused */ - ""; /* Unused */ - }; - - clk_m_a0_div3: clk-m-a0-div3 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf3", - "st,clkgena-divmux"; - - clocks = <&clk_m_a0_osc_prediv>, - <&clk_m_a0_pll0 3>, /* PLL0 PHI3 */ - <&clk_m_a0_pll1 3>; /* PLL1 PHI3 */ - - clock-output-names = "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "clk-m-icn-eram", - "clk-m-a9-trace"; - }; - }; - - clockgen-a@fd6db000 { - reg = <0xfd6db000 0xb50>; - - clk_m_a1_pll0: clk-m-a1-pll0 { - #clock-cells = <1>; - compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a1-pll0-phi0", - "clk-m-a1-pll0-phi1", - "clk-m-a1-pll0-phi2", - "clk-m-a1-pll0-phi3"; - }; - - clk_m_a1_pll1: clk-m-a1-pll1 { - #clock-cells = <1>; - compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a1-pll1-phi0", - "clk-m-a1-pll1-phi1", - "clk-m-a1-pll1-phi2", - "clk-m-a1-pll1-phi3"; - }; - - clk_m_a1_osc_prediv: clk-m-a1-osc-prediv { - #clock-cells = <0>; - compatible = "st,clkgena-prediv-c32", - "st,clkgena-prediv"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a1-osc-prediv"; - }; - - clk_m_a1_div0: clk-m-a1-div0 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf0", - "st,clkgena-divmux"; - - clocks = <&clk_m_a1_osc_prediv>, - <&clk_m_a1_pll0 0>, /* PLL0 PHI0 */ - <&clk_m_a1_pll1 0>; /* PLL1 PHI0 */ - - clock-output-names = "clk-m-fdma-12", - "clk-m-fdma-10", - "clk-m-fdma-11", - "clk-m-hva-lmi", - "clk-m-proc-sc", - "clk-m-tp", - "clk-m-icn-gpu", - "clk-m-icn-vdp-0"; - }; - - clk_m_a1_div1: clk-m-a1-div1 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf1", - "st,clkgena-divmux"; - - clocks = <&clk_m_a1_osc_prediv>, - <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */ - <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */ - - clock-output-names = "clk-m-icn-vdp-1", - "clk-m-icn-vdp-2", - "clk-m-icn-vdp-3", - "clk-m-prv-t1-bus", - "clk-m-icn-vdp-4", - "clk-m-icn-reg-10", - "", /* Unused */ - ""; /* clk-m-icn-st231 */ - }; - - clk_m_a1_div2: clk-m-a1-div2 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf2", - "st,clkgena-divmux"; - - clocks = <&clk_m_a1_osc_prediv>, - <&clk_m_a1_pll0 2>, /* PLL0 PHI2 */ - <&clk_m_a1_pll1 2>; /* PLL1 PHI2 */ - - clock-output-names = "clk-m-fvdp-proc-alt", - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - ""; /* Unused */ - }; - - clk_m_a1_div3: clk-m-a1-div3 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf3", - "st,clkgena-divmux"; - - clocks = <&clk_m_a1_osc_prediv>, - <&clk_m_a1_pll0 3>, /* PLL0 PHI3 */ - <&clk_m_a1_pll1 3>; /* PLL1 PHI3 */ - - clock-output-names = "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - ""; /* Unused */ - }; - }; - - clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2 { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&clk_m_a0_div1 2>; - clock-div = <2>; - clock-mult = <1>; - }; - - clockgen-a@fd345000 { - reg = <0xfd345000 0xb50>; - - clk_m_a2_pll0: clk-m-a2-pll0 { - #clock-cells = <1>; - compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a2-pll0-phi0", - "clk-m-a2-pll0-phi1", - "clk-m-a2-pll0-phi2", - "clk-m-a2-pll0-phi3"; - }; - - clk_m_a2_pll1: clk-m-a2-pll1 { - #clock-cells = <1>; - compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a2-pll1-phi0", - "clk-m-a2-pll1-phi1", - "clk-m-a2-pll1-phi2", - "clk-m-a2-pll1-phi3"; - }; - - clk_m_a2_osc_prediv: clk-m-a2-osc-prediv { - #clock-cells = <0>; - compatible = "st,clkgena-prediv-c32", - "st,clkgena-prediv"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a2-osc-prediv"; - }; - - clk_m_a2_div0: clk-m-a2-div0 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf0", - "st,clkgena-divmux"; - - clocks = <&clk_m_a2_osc_prediv>, - <&clk_m_a2_pll0 0>, /* PLL0 PHI0 */ - <&clk_m_a2_pll1 0>; /* PLL1 PHI0 */ - - clock-output-names = "clk-m-vtac-main-phy", - "clk-m-vtac-aux-phy", - "clk-m-stac-phy", - "clk-m-stac-sys", - "", /* clk-m-mpestac-pg */ - "", /* clk-m-mpestac-wc */ - "", /* clk-m-mpevtacaux-pg*/ - ""; /* clk-m-mpevtacmain-pg*/ - }; - - clk_m_a2_div1: clk-m-a2-div1 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf1", - "st,clkgena-divmux"; - - clocks = <&clk_m_a2_osc_prediv>, - <&clk_m_a2_pll0 1>, /* PLL0 PHI1 */ - <&clk_m_a2_pll1 1>; /* PLL1 PHI1 */ - - clock-output-names = "", /* clk-m-mpevtacrx0-wc */ - "", /* clk-m-mpevtacrx1-wc */ - "clk-m-compo-main", - "clk-m-compo-aux", - "clk-m-bdisp-0", - "clk-m-bdisp-1", - "clk-m-icn-bdisp-0", - "clk-m-icn-bdisp-1"; - }; - - clk_m_a2_div2: clk-m-a2-div2 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf2", - "st,clkgena-divmux"; - - clocks = <&clk_m_a2_osc_prediv>, - <&clk_m_a2_pll0 2>, /* PLL0 PHI2 */ - <&clk_m_a2_pll1 2>; /* PLL1 PHI2 */ - - clock-output-names = "", /* clk-m-icn-hqvdp0 */ - "", /* clk-m-icn-hqvdp1 */ - "clk-m-icn-compo", - "", /* clk-m-icn-vdpaux */ - "clk-m-icn-ts", - "clk-m-icn-reg-lp-10", - "clk-m-dcephy-impctrl", - ""; /* Unused */ - }; - - clk_m_a2_div3: clk-m-a2-div3 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf3", - "st,clkgena-divmux"; - - clocks = <&clk_m_a2_osc_prediv>, - <&clk_m_a2_pll0 3>, /* PLL0 PHI3 */ - <&clk_m_a2_pll1 3>; /* PLL1 PHI3 */ - - clock-output-names = ""; /* Unused */ - /* Remaining outputs unused */ - }; - }; - - /* - * A9 PLL - */ - clockgen-a9@fdde00d8 { - reg = <0xfdde00d8 0x70>; - - clockgen_a9_pll: clockgen-a9-pll { - #clock-cells = <1>; - compatible = "st,stih415-plls-c32-a9", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - clock-output-names = "clockgen-a9-pll-odf"; - }; - }; - - /* - * ARM CPU related clocks - */ - clk_m_a9: clk-m-a9@fdde00d8 { - #clock-cells = <0>; - compatible = "st,stih415-clkgen-a9-mux", "st,clkgen-mux"; - reg = <0xfdde00d8 0x4>; - clocks = <&clockgen_a9_pll 0>, - <&clockgen_a9_pll 0>, - <&clk_m_a0_div1 2>, - <&clk_m_a9_ext2f_div2>; - }; - - /* - * ARM Peripheral clock for timers - */ - arm_periph_clk: clk-m-a9-periphs { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&clk_m_a9>; - clock-div = <2>; - clock-mult = <1>; - }; - }; -}; diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi deleted file mode 100644 index bd028ce98b61..000000000000 --- a/arch/arm/boot/dts/stih415-pinctrl.dtsi +++ /dev/null @@ -1,545 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics (R&D) Limited. - * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -#include "st-pincfg.h" -#include <dt-bindings/interrupt-controller/arm-gic.h> -/ { - - aliases { - gpio0 = &pio0; - gpio1 = &pio1; - gpio2 = &pio2; - gpio3 = &pio3; - gpio4 = &pio4; - gpio5 = &pio5; - gpio6 = &pio6; - gpio7 = &pio7; - gpio8 = &pio8; - gpio9 = &pio9; - gpio10 = &pio10; - gpio11 = &pio11; - gpio12 = &pio12; - gpio13 = &pio13; - gpio14 = &pio14; - gpio15 = &pio15; - gpio16 = &pio16; - gpio17 = &pio17; - gpio18 = &pio18; - gpio19 = &pio100; - gpio20 = &pio101; - gpio21 = &pio102; - gpio22 = &pio103; - gpio23 = &pio104; - gpio24 = &pio105; - gpio25 = &pio106; - gpio26 = &pio107; - }; - - soc { - pin-controller-sbc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stih415-sbc-pinctrl"; - st,syscfg = <&syscfg_sbc>; - reg = <0xfe61f080 0x4>; - reg-names = "irqmux"; - interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "irqmux"; - ranges = <0 0xfe610000 0x5000>; - - pio0: gpio@fe610000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x100>; - st,bank-name = "PIO0"; - }; - pio1: gpio@fe611000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x100>; - st,bank-name = "PIO1"; - }; - pio2: gpio@fe612000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x100>; - st,bank-name = "PIO2"; - }; - pio3: gpio@fe613000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x3000 0x100>; - st,bank-name = "PIO3"; - }; - pio4: gpio@fe614000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x4000 0x100>; - st,bank-name = "PIO4"; - }; - - sbc_serial1 { - pinctrl_sbc_serial1:sbc_serial1 { - st,pins { - tx = <&pio2 6 ALT3 OUT>; - rx = <&pio2 7 ALT3 IN>; - }; - }; - }; - - keyscan { - pinctrl_keyscan: keyscan { - st,pins { - keyin0 = <&pio0 2 ALT2 IN>; - keyin1 = <&pio0 3 ALT2 IN>; - keyin2 = <&pio0 4 ALT2 IN>; - keyin3 = <&pio2 6 ALT2 IN>; - - keyout0 = <&pio1 6 ALT2 OUT>; - keyout1 = <&pio1 7 ALT2 OUT>; - keyout2 = <&pio0 6 ALT2 OUT>; - keyout3 = <&pio2 7 ALT2 OUT>; - }; - }; - }; - - sbc_i2c0 { - pinctrl_sbc_i2c0_default: sbc_i2c0-default { - st,pins { - sda = <&pio4 6 ALT1 BIDIR>; - scl = <&pio4 5 ALT1 BIDIR>; - }; - }; - }; - - sbc_i2c1 { - pinctrl_sbc_i2c1_default: sbc_i2c1-default { - st,pins { - sda = <&pio3 2 ALT2 BIDIR>; - scl = <&pio3 1 ALT2 BIDIR>; - }; - }; - }; - - rc{ - pinctrl_ir: ir0 { - st,pins { - ir = <&pio4 0 ALT2 IN>; - }; - }; - }; - - gmac1 { - pinctrl_mii1: mii1 { - st,pins { - txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; - col = <&pio0 7 ALT1 IN BYPASS 1000>; - mdio = <&pio1 0 ALT1 OUT BYPASS 0>; - mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; - crs = <&pio1 2 ALT1 IN BYPASS 1000>; - mdint = <&pio1 3 ALT1 IN BYPASS 0>; - rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; - phyclk = <&pio2 3 ALT1 IN NICLK 1000 CLK_A>; - }; - }; - - pinctrl_rgmii1: rgmii1-0 { - st,pins { - txd0 = <&pio0 0 ALT1 OUT DE_IO 1000 CLK_A>; - txd1 = <&pio0 1 ALT1 OUT DE_IO 1000 CLK_A>; - txd2 = <&pio0 2 ALT1 OUT DE_IO 1000 CLK_A>; - txd3 = <&pio0 3 ALT1 OUT DE_IO 1000 CLK_A>; - txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>; - txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; - mdio = <&pio1 0 ALT1 OUT BYPASS 0>; - mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; - rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>; - rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>; - rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>; - rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>; - - rxdv = <&pio2 0 ALT1 IN DE_IO 500 CLK_A>; - rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; - phyclk = <&pio2 3 ALT4 OUT NICLK 0 CLK_B>; - - clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>; - }; - }; - }; - }; - - pin-controller-front { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stih415-front-pinctrl"; - st,syscfg = <&syscfg_front>; - reg = <0xfee0f080 0x4>; - reg-names = "irqmux"; - interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "irqmux"; - ranges = <0 0xfee00000 0x8000>; - - pio5: gpio@fee00000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x100>; - st,bank-name = "PIO5"; - }; - pio6: gpio@fee01000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x100>; - st,bank-name = "PIO6"; - }; - pio7: gpio@fee02000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x100>; - st,bank-name = "PIO7"; - }; - pio8: gpio@fee03000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x3000 0x100>; - st,bank-name = "PIO8"; - }; - pio9: gpio@fee04000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x4000 0x100>; - st,bank-name = "PIO9"; - }; - pio10: gpio@fee05000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x5000 0x100>; - st,bank-name = "PIO10"; - }; - pio11: gpio@fee06000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x6000 0x100>; - st,bank-name = "PIO11"; - }; - pio12: gpio@fee07000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x7000 0x100>; - st,bank-name = "PIO12"; - }; - - i2c0 { - pinctrl_i2c0_default: i2c0-default { - st,pins { - sda = <&pio9 3 ALT1 BIDIR>; - scl = <&pio9 2 ALT1 BIDIR>; - }; - }; - }; - - i2c1 { - pinctrl_i2c1_default: i2c1-default { - st,pins { - sda = <&pio12 1 ALT1 BIDIR>; - scl = <&pio12 0 ALT1 BIDIR>; - }; - }; - }; - }; - - pin-controller-rear { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stih415-rear-pinctrl"; - st,syscfg = <&syscfg_rear>; - reg = <0xfe82f080 0x4>; - reg-names = "irqmux"; - interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "irqmux"; - ranges = <0 0xfe820000 0x8000>; - - pio13: gpio@fe820000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x100>; - st,bank-name = "PIO13"; - }; - pio14: gpio@fe821000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x100>; - st,bank-name = "PIO14"; - }; - pio15: gpio@fe822000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x100>; - st,bank-name = "PIO15"; - }; - pio16: gpio@fe823000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x3000 0x100>; - st,bank-name = "PIO16"; - }; - pio17: gpio@fe824000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x4000 0x100>; - st,bank-name = "PIO17"; - }; - pio18: gpio@fe825000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x5000 0x100>; - st,bank-name = "PIO18"; - }; - - serial2 { - pinctrl_serial2: serial2-0 { - st,pins { - tx = <&pio17 4 ALT2 OUT>; - rx = <&pio17 5 ALT2 IN>; - }; - }; - }; - - gmac0{ - pinctrl_mii0: mii0 { - st,pins { - mdint = <&pio13 6 ALT2 IN BYPASS 0>; - txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - - txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>; - txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>; - - txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>; - txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - crs = <&pio15 2 ALT2 IN BYPASS 1000>; - col = <&pio15 3 ALT2 IN BYPASS 1000>; - mdio = <&pio15 4 ALT2 OUT BYPASS 3000>; - mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>; - - rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>; - phyclk = <&pio13 5 ALT2 OUT NICLK 1000 CLK_A>; - - }; - }; - - pinctrl_gmii0: gmii0 { - st,pins { - mdint = <&pio13 6 ALT2 IN BYPASS 0>; - mdio = <&pio15 4 ALT2 OUT BYPASS 3000>; - mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>; - txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; - - txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; - txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; - txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; - txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; - txd4 = <&pio14 4 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; - txd5 = <&pio14 5 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; - txd6 = <&pio14 6 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; - txd7 = <&pio14 7 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; - - txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>; - txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; - crs = <&pio15 2 ALT2 IN BYPASS 1000>; - col = <&pio15 3 ALT2 IN BYPASS 1000>; - rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - - rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd4 = <&pio16 4 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd5 = <&pio16 5 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd6 = <&pio16 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd7 = <&pio16 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - - rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>; - clk125 = <&pio17 6 ALT1 IN NICLK 0 CLK_A>; - phyclk = <&pio13 5 ALT4 OUT NICLK 0 CLK_B>; - - - }; - }; - }; - - mmc0 { - pinctrl_mmc0: mmc0 { - st,pins { - mmcclk = <&pio13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>; - data0 = <&pio14 4 ALT4 BIDIR_PU BYPASS 0>; - data1 = <&pio14 5 ALT4 BIDIR_PU BYPASS 0>; - data2 = <&pio14 6 ALT4 BIDIR_PU BYPASS 0>; - data3 = <&pio14 7 ALT4 BIDIR_PU BYPASS 0>; - cmd = <&pio15 1 ALT4 BIDIR_PU BYPASS 0>; - wp = <&pio15 3 ALT4 IN>; - data4 = <&pio16 4 ALT4 BIDIR_PU BYPASS 0>; - data5 = <&pio16 5 ALT4 BIDIR_PU BYPASS 0>; - data6 = <&pio16 6 ALT4 BIDIR_PU BYPASS 0>; - data7 = <&pio16 7 ALT4 BIDIR_PU BYPASS 0>; - pwr = <&pio17 1 ALT4 OUT>; - cd = <&pio17 2 ALT4 IN>; - led = <&pio17 3 ALT4 OUT>; - }; - }; - }; - }; - - pin-controller-left { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stih415-left-pinctrl"; - st,syscfg = <&syscfg_left>; - reg = <0xfd6bf080 0x4>; - reg-names = "irqmux"; - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "irqmux"; - ranges = <0 0xfd6b0000 0x3000>; - - pio100: gpio@fd6b0000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x100>; - st,bank-name = "PIO100"; - }; - pio101: gpio@fd6b1000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x100>; - st,bank-name = "PIO101"; - }; - pio102: gpio@fd6b2000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x100>; - st,bank-name = "PIO102"; - }; - }; - - pin-controller-right { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stih415-right-pinctrl"; - st,syscfg = <&syscfg_right>; - reg = <0xfd33f080 0x4>; - reg-names = "irqmux"; - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "irqmux"; - ranges = <0 0xfd330000 0x5000>; - - pio103: gpio@fd330000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x100>; - st,bank-name = "PIO103"; - }; - pio104: gpio@fd331000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x100>; - st,bank-name = "PIO104"; - }; - pio105: gpio@fd332000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x100>; - st,bank-name = "PIO105"; - }; - pio106: gpio@fd333000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x3000 0x100>; - st,bank-name = "PIO106"; - }; - pio107: gpio@fd334000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x4000 0x100>; - st,bank-name = "PIO107"; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi deleted file mode 100644 index 12427e651e5e..000000000000 --- a/arch/arm/boot/dts/stih415.dtsi +++ /dev/null @@ -1,234 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics (R&D) Limited. - * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -#include "stih41x.dtsi" -#include "stih415-clock.dtsi" -#include "stih415-pinctrl.dtsi" -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/reset/stih415-resets.h> -/ { - - L2: cache-controller { - compatible = "arm,pl310-cache"; - reg = <0xfffe2000 0x1000>; - arm,data-latency = <3 2 2>; - arm,tag-latency = <1 1 1>; - cache-unified; - cache-level = <2>; - }; - - soc { - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&intc>; - ranges; - compatible = "simple-bus"; - - powerdown: powerdown-controller { - #reset-cells = <1>; - compatible = "st,stih415-powerdown"; - }; - - softreset: softreset-controller { - #reset-cells = <1>; - compatible = "st,stih415-softreset"; - }; - - syscfg_sbc: sbc-syscfg@fe600000{ - compatible = "st,stih415-sbc-syscfg", "syscon"; - reg = <0xfe600000 0xb4>; - }; - - syscfg_front: front-syscfg@fee10000{ - compatible = "st,stih415-front-syscfg", "syscon"; - reg = <0xfee10000 0x194>; - }; - - syscfg_rear: rear-syscfg@fe830000{ - compatible = "st,stih415-rear-syscfg", "syscon"; - reg = <0xfe830000 0x190>; - }; - - /* MPE syscfgs */ - syscfg_left: left-syscfg@fd690000{ - compatible = "st,stih415-left-syscfg", "syscon"; - reg = <0xfd690000 0x78>; - }; - - syscfg_right: right-syscfg@fd320000{ - compatible = "st,stih415-right-syscfg", "syscon"; - reg = <0xfd320000 0x180>; - }; - - syscfg_system: system-syscfg@fdde0000 { - compatible = "st,stih415-system-syscfg", "syscon"; - reg = <0xfdde0000 0x15c>; - }; - - syscfg_lpm: lpm-syscfg@fe4b5100{ - compatible = "st,stih415-lpm-syscfg", "syscon"; - reg = <0xfe4b5100 0x08>; - }; - - serial2: serial@fed32000 { - compatible = "st,asc"; - status = "disabled"; - reg = <0xfed32000 0x2c>; - interrupts = <0 197 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_serial2>; - clocks = <&clk_s_a0_ls CLK_ICN_REG>; - }; - - /* SBC comms block ASCs in SASG1 */ - sbc_serial1: serial@fe531000 { - compatible = "st,asc"; - status = "disabled"; - reg = <0xfe531000 0x2c>; - interrupts = <0 210 0>; - clocks = <&clk_sysin>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sbc_serial1>; - }; - - i2c@fed40000 { - compatible = "st,comms-ssc4-i2c"; - reg = <0xfed40000 0x110>; - interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_s_a0_ls CLK_ICN_REG>; - clock-names = "ssc"; - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0_default>; - - status = "disabled"; - }; - - i2c@fed41000 { - compatible = "st,comms-ssc4-i2c"; - reg = <0xfed41000 0x110>; - interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_s_a0_ls CLK_ICN_REG>; - clock-names = "ssc"; - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_default>; - - status = "disabled"; - }; - - i2c@fe540000 { - compatible = "st,comms-ssc4-i2c"; - reg = <0xfe540000 0x110>; - interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_sysin>; - clock-names = "ssc"; - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sbc_i2c0_default>; - - status = "disabled"; - }; - - i2c@fe541000 { - compatible = "st,comms-ssc4-i2c"; - reg = <0xfe541000 0x110>; - interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_sysin>; - clock-names = "ssc"; - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sbc_i2c1_default>; - - status = "disabled"; - }; - - ethernet0: dwmac@fe810000 { - device_type = "network"; - compatible = "st,stih415-dwmac", "snps,dwmac", "snps,dwmac-3.610"; - status = "disabled"; - - reg = <0xfe810000 0x8000>; - reg-names = "stmmaceth"; - - interrupts = <0 147 0>, <0 148 0>, <0 149 0>; - interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; - resets = <&softreset STIH415_ETH0_SOFTRESET>; - reset-names = "stmmaceth"; - - snps,pbl = <32>; - snps,mixed-burst; - snps,force_sf_dma_mode; - - st,syscon = <&syscfg_rear 0x148>; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mii0>; - clock-names = "stmmaceth", "sti-ethclk"; - clocks = <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>; - }; - - ethernet1: dwmac@fef08000 { - device_type = "network"; - compatible = "st,stih415-dwmac", "snps,dwmac", "snps,dwmac-3.610"; - status = "disabled"; - reg = <0xfef08000 0x8000>; - reg-names = "stmmaceth"; - interrupts = <0 150 0>, <0 151 0>, <0 152 0>; - interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; - - snps,pbl = <32>; - snps,mixed-burst; - snps,force_sf_dma_mode; - - st,syscon = <&syscfg_sbc 0x74>; - - resets = <&softreset STIH415_ETH1_SOFTRESET>; - reset-names = "stmmaceth"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mii1>; - clock-names = "stmmaceth", "sti-ethclk"; - clocks = <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>; - }; - - rc: rc@fe518000 { - compatible = "st,comms-irb"; - reg = <0xfe518000 0x234>; - interrupts = <0 203 0>; - clocks = <&clk_sysin>; - rx-mode = "infrared"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ir>; - resets = <&softreset STIH415_IRB_SOFTRESET>; - }; - - keyscan: keyscan@fe4b0000 { - compatible = "st,sti-keyscan"; - status = "disabled"; - reg = <0xfe4b0000 0x2000>; - interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>; - clocks = <&clk_sysin>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_keyscan>; - resets = <&powerdown STIH415_KEYSCAN_POWERDOWN>, - <&softreset STIH415_KEYSCAN_SOFTRESET>; - }; - - mmc0: sdhci@fe81e000 { - compatible = "st,sdhci"; - status = "disabled"; - reg = <0xfe81e000 0x1000>; - interrupts = <GIC_SPI 145 IRQ_TYPE_NONE>; - interrupt-names = "mmcirq"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mmc0>; - clock-names = "mmc"; - clocks = <&clk_s_a1_ls 1>; - }; - }; -}; diff --git a/arch/arm/boot/dts/stih416-b2000.dts b/arch/arm/boot/dts/stih416-b2000.dts deleted file mode 100644 index 488e80a5d69d..000000000000 --- a/arch/arm/boot/dts/stih416-b2000.dts +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics (R&D) Limited. - * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -/dts-v1/; -#include "stih416.dtsi" -#include "stih41x-b2000.dtsi" -/ { - model = "STiH416 B2000"; - compatible = "st,stih416-b2000", "st,stih416"; -}; diff --git a/arch/arm/boot/dts/stih416-b2020.dts b/arch/arm/boot/dts/stih416-b2020.dts deleted file mode 100644 index 200a81844765..000000000000 --- a/arch/arm/boot/dts/stih416-b2020.dts +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics (R&D) Limited. - * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -/dts-v1/; -#include "stih416.dtsi" -#include "stih41x-b2020.dtsi" -/ { - model = "STiH416 B2020"; - compatible = "st,stih416-b2020", "st,stih416"; - - soc { - mmc1: sdhci@fe81f000 { - status = "okay"; - bus-width = <8>; - non-removable; - }; - - miphy365x_phy: phy@fe382000 { - phy_port0: port@fe382000 { - st,sata-gen = <3>; - }; - - phy_port1: port@fe38a000 { - st,pcie-tx-pol-inv; - }; - }; - - sata0: sata@fe380000{ - status = "okay"; - }; - }; -}; diff --git a/arch/arm/boot/dts/stih416-b2020e.dts b/arch/arm/boot/dts/stih416-b2020e.dts deleted file mode 100644 index de320cd067de..000000000000 --- a/arch/arm/boot/dts/stih416-b2020e.dts +++ /dev/null @@ -1,65 +0,0 @@ -/* - * Copyright (C) 2014 STMicroelectronics (R&D) Limited. - * Author: Lee Jones <lee.jones@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -/dts-v1/; -#include "stih416.dtsi" -#include "stih41x-b2020.dtsi" -#include <dt-bindings/gpio/gpio.h> -/ { - model = "STiH416 B2020 REV-E"; - compatible = "st,stih416-b2020", "st,stih416"; - - soc { - leds { - compatible = "gpio-leds"; - red { - label = "Front Panel LED"; - gpios = <&pio4 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - green { - gpios = <&pio1 3 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; - - ethernet1: dwmac@fef08000 { - snps,reset-gpio = <&pio0 7>; - }; - - mmc1: sdhci@fe81f000 { - status = "okay"; - bus-width = <8>; - non-removable; - }; - - miphy365x_phy: phy@fe382000 { - phy_port0: port@fe382000 { - st,sata-gen = <3>; - }; - - phy_port1: port@fe38a000 { - st,pcie-tx-pol-inv; - }; - }; - - sata0: sata@fe380000{ - status = "okay"; - }; - - /* SAS PWM Module */ - pwm0: pwm@fed10000 { - status = "okay"; - }; - - /* SBC PWM Module */ - pwm1: pwm@fe510000 { - status = "okay"; - }; - }; -}; diff --git a/arch/arm/boot/dts/stih416-clock.dtsi b/arch/arm/boot/dts/stih416-clock.dtsi deleted file mode 100644 index 5b4fb838cddb..000000000000 --- a/arch/arm/boot/dts/stih416-clock.dtsi +++ /dev/null @@ -1,756 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics R&D Limited - * <stlinux-devel@stlinux.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <dt-bindings/clock/stih416-clks.h> - -/ { - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* - * Fixed 30MHz oscillator inputs to SoC - */ - clk_sysin: clk-sysin { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <30000000>; - }; - - /* - * ClockGenAs on SASG2 - */ - clockgen-a@fee62000 { - reg = <0xfee62000 0xb48>; - - clk_s_a0_pll: clk-s-a0-pll { - #clock-cells = <1>; - compatible = "st,clkgena-plls-c65"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-s-a0-pll0-hs", - "clk-s-a0-pll0-ls", - "clk-s-a0-pll1"; - }; - - clk_s_a0_osc_prediv: clk-s-a0-osc-prediv { - #clock-cells = <0>; - compatible = "st,clkgena-prediv-c65", - "st,clkgena-prediv"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-s-a0-osc-prediv"; - }; - - clk_s_a0_hs: clk-s-a0-hs { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c65-hs", - "st,clkgena-divmux"; - - clocks = <&clk_s_a0_osc_prediv>, - <&clk_s_a0_pll 0>, /* PLL0 HS */ - <&clk_s_a0_pll 2>; /* PLL1 */ - - clock-output-names = "clk-s-fdma-0", - "clk-s-fdma-1", - ""; /* clk-s-jit-sense */ - /* Fourth output unused */ - }; - - clk_s_a0_ls: clk-s-a0-ls { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c65-ls", - "st,clkgena-divmux"; - - clocks = <&clk_s_a0_osc_prediv>, - <&clk_s_a0_pll 1>, /* PLL0 LS */ - <&clk_s_a0_pll 2>; /* PLL1 */ - - clock-output-names = "clk-s-icn-reg-0", - "clk-s-icn-if-0", - "clk-s-icn-reg-lp-0", - "clk-s-emiss", - "clk-s-eth1-phy", - "clk-s-mii-ref-out"; - /* Remaining outputs unused */ - }; - }; - - clockgen-a@fee81000 { - reg = <0xfee81000 0xb48>; - - clk_s_a1_pll: clk-s-a1-pll { - #clock-cells = <1>; - compatible = "st,clkgena-plls-c65"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-s-a1-pll0-hs", - "clk-s-a1-pll0-ls", - "clk-s-a1-pll1"; - }; - - clk_s_a1_osc_prediv: clk-s-a1-osc-prediv { - #clock-cells = <0>; - compatible = "st,clkgena-prediv-c65", - "st,clkgena-prediv"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-s-a1-osc-prediv"; - }; - - clk_s_a1_hs: clk-s-a1-hs { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c65-hs", - "st,clkgena-divmux"; - - clocks = <&clk_s_a1_osc_prediv>, - <&clk_s_a1_pll 0>, /* PLL0 HS */ - <&clk_s_a1_pll 2>; /* PLL1 */ - - clock-output-names = "", /* Reserved */ - "", /* Reserved */ - "clk-s-stac-phy", - "clk-s-vtac-tx-phy"; - }; - - clk_s_a1_ls: clk-s-a1-ls { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c65-ls", - "st,clkgena-divmux"; - - clocks = <&clk_s_a1_osc_prediv>, - <&clk_s_a1_pll 1>, /* PLL0 LS */ - <&clk_s_a1_pll 2>; /* PLL1 */ - - clock-output-names = "clk-s-icn-if-2", - "clk-s-card-mmc-0", - "clk-s-icn-if-1", - "clk-s-gmac0-phy", - "clk-s-nand-ctrl", - "", /* Reserved */ - "clk-s-mii0-ref-out", - "clk-s-stac-sys", - "clk-s-card-mmc-1"; - /* Remaining outputs unused */ - }; - }; - - /* - * ClockGenAs on MPE42 - */ - clockgen-a@fde12000 { - reg = <0xfde12000 0xb50>; - - clk_m_a0_pll0: clk-m-a0-pll0 { - #clock-cells = <1>; - compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a0-pll0-phi0", - "clk-m-a0-pll0-phi1", - "clk-m-a0-pll0-phi2", - "clk-m-a0-pll0-phi3"; - }; - - clk_m_a0_pll1: clk-m-a0-pll1 { - #clock-cells = <1>; - compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a0-pll1-phi0", - "clk-m-a0-pll1-phi1", - "clk-m-a0-pll1-phi2", - "clk-m-a0-pll1-phi3"; - }; - - clk_m_a0_osc_prediv: clk-m-a0-osc-prediv { - #clock-cells = <0>; - compatible = "st,clkgena-prediv-c32", - "st,clkgena-prediv"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a0-osc-prediv"; - }; - - clk_m_a0_div0: clk-m-a0-div0 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf0", - "st,clkgena-divmux"; - - clocks = <&clk_m_a0_osc_prediv>, - <&clk_m_a0_pll0 0>, /* PLL0 PHI0 */ - <&clk_m_a0_pll1 0>; /* PLL1 PHI0 */ - - clock-output-names = "", /* Unused */ - "", /* Unused */ - "clk-m-fdma-12", - "", /* Unused */ - "clk-m-pp-dmu-0", - "clk-m-pp-dmu-1", - "clk-m-icm-lmi", - "clk-m-vid-dmu-0"; - }; - - clk_m_a0_div1: clk-m-a0-div1 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf1", - "st,clkgena-divmux"; - - clocks = <&clk_m_a0_osc_prediv>, - <&clk_m_a0_pll0 1>, /* PLL0 PHI1 */ - <&clk_m_a0_pll1 1>; /* PLL1 PHI1 */ - - clock-output-names = "clk-m-vid-dmu-1", - "", /* Unused */ - "clk-m-a9-ext2f", - "clk-m-st40rt", - "clk-m-st231-dmu-0", - "clk-m-st231-dmu-1", - "clk-m-st231-aud", - "clk-m-st231-gp-0"; - }; - - clk_m_a0_div2: clk-m-a0-div2 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf2", - "st,clkgena-divmux"; - - clocks = <&clk_m_a0_osc_prediv>, - <&clk_m_a0_pll0 2>, /* PLL0 PHI2 */ - <&clk_m_a0_pll1 2>; /* PLL1 PHI2 */ - - clock-output-names = "clk-m-st231-gp-1", - "clk-m-icn-cpu", - "clk-m-icn-stac", - "clk-m-tx-icn-dmu-0", - "clk-m-tx-icn-dmu-1", - "clk-m-tx-icn-ts", - "clk-m-icn-vdp-0", - "clk-m-icn-vdp-1"; - }; - - clk_m_a0_div3: clk-m-a0-div3 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf3", - "st,clkgena-divmux"; - - clocks = <&clk_m_a0_osc_prediv>, - <&clk_m_a0_pll0 3>, /* PLL0 PHI3 */ - <&clk_m_a0_pll1 3>; /* PLL1 PHI3 */ - - clock-output-names = "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "clk-m-icn-vp8", - "", /* Unused */ - "clk-m-icn-reg-11", - "clk-m-a9-trace"; - }; - }; - - clockgen-a@fd6db000 { - reg = <0xfd6db000 0xb50>; - - clk_m_a1_pll0: clk-m-a1-pll0 { - #clock-cells = <1>; - compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a1-pll0-phi0", - "clk-m-a1-pll0-phi1", - "clk-m-a1-pll0-phi2", - "clk-m-a1-pll0-phi3"; - }; - - clk_m_a1_pll1: clk-m-a1-pll1 { - #clock-cells = <1>; - compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a1-pll1-phi0", - "clk-m-a1-pll1-phi1", - "clk-m-a1-pll1-phi2", - "clk-m-a1-pll1-phi3"; - }; - - clk_m_a1_osc_prediv: clk-m-a1-osc-prediv { - #clock-cells = <0>; - compatible = "st,clkgena-prediv-c32", - "st,clkgena-prediv"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a1-osc-prediv"; - }; - - clk_m_a1_div0: clk-m-a1-div0 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf0", - "st,clkgena-divmux"; - - clocks = <&clk_m_a1_osc_prediv>, - <&clk_m_a1_pll0 0>, /* PLL0 PHI0 */ - <&clk_m_a1_pll1 0>; /* PLL1 PHI0 */ - - clock-output-names = "", /* Unused */ - "clk-m-fdma-10", - "clk-m-fdma-11", - "clk-m-hva-alt", - "clk-m-proc-sc", - "clk-m-tp", - "clk-m-rx-icn-dmu-0", - "clk-m-rx-icn-dmu-1"; - }; - - clk_m_a1_div1: clk-m-a1-div1 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf1", - "st,clkgena-divmux"; - - clocks = <&clk_m_a1_osc_prediv>, - <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */ - <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */ - - clock-output-names = "clk-m-rx-icn-ts", - "clk-m-rx-icn-vdp-0", - "", /* Unused */ - "clk-m-prv-t1-bus", - "clk-m-icn-reg-12", - "clk-m-icn-reg-10", - "", /* Unused */ - "clk-m-icn-st231"; - }; - - clk_m_a1_div2: clk-m-a1-div2 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf2", - "st,clkgena-divmux"; - - clocks = <&clk_m_a1_osc_prediv>, - <&clk_m_a1_pll0 2>, /* PLL0 PHI2 */ - <&clk_m_a1_pll1 2>; /* PLL1 PHI2 */ - - clock-output-names = "clk-m-fvdp-proc-alt", - "clk-m-icn-reg-13", - "clk-m-tx-icn-gpu", - "clk-m-rx-icn-gpu", - "", /* Unused */ - "", /* Unused */ - "", /* clk-m-apb-pm-12 */ - ""; /* Unused */ - }; - - clk_m_a1_div3: clk-m-a1-div3 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf3", - "st,clkgena-divmux"; - - clocks = <&clk_m_a1_osc_prediv>, - <&clk_m_a1_pll0 3>, /* PLL0 PHI3 */ - <&clk_m_a1_pll1 3>; /* PLL1 PHI3 */ - - clock-output-names = "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - ""; /* clk-m-gpu-alt */ - }; - }; - - clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2 { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&clk_m_a0_div1 2>; - clock-div = <2>; - clock-mult = <1>; - }; - - clockgen-a@fd345000 { - reg = <0xfd345000 0xb50>; - - clk_m_a2_pll0: clk-m-a2-pll0 { - #clock-cells = <1>; - compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a2-pll0-phi0", - "clk-m-a2-pll0-phi1", - "clk-m-a2-pll0-phi2", - "clk-m-a2-pll0-phi3"; - }; - - clk_m_a2_pll1: clk-m-a2-pll1 { - #clock-cells = <1>; - compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a2-pll1-phi0", - "clk-m-a2-pll1-phi1", - "clk-m-a2-pll1-phi2", - "clk-m-a2-pll1-phi3"; - }; - - clk_m_a2_osc_prediv: clk-m-a2-osc-prediv { - #clock-cells = <0>; - compatible = "st,clkgena-prediv-c32", - "st,clkgena-prediv"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a2-osc-prediv"; - }; - - clk_m_a2_div0: clk-m-a2-div0 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf0", - "st,clkgena-divmux"; - - clocks = <&clk_m_a2_osc_prediv>, - <&clk_m_a2_pll0 0>, /* PLL0 PHI0 */ - <&clk_m_a2_pll1 0>; /* PLL1 PHI0 */ - - clock-output-names = "clk-m-vtac-main-phy", - "clk-m-vtac-aux-phy", - "clk-m-stac-phy", - "clk-m-stac-sys", - "", /* clk-m-mpestac-pg */ - "", /* clk-m-mpestac-wc */ - "", /* clk-m-mpevtacaux-pg*/ - ""; /* clk-m-mpevtacmain-pg*/ - }; - - clk_m_a2_div1: clk-m-a2-div1 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf1", - "st,clkgena-divmux"; - - clocks = <&clk_m_a2_osc_prediv>, - <&clk_m_a2_pll0 1>, /* PLL0 PHI1 */ - <&clk_m_a2_pll1 1>; /* PLL1 PHI1 */ - - clock-output-names = "", /* clk-m-mpevtacrx0-wc */ - "", /* clk-m-mpevtacrx1-wc */ - "clk-m-compo-main", - "clk-m-compo-aux", - "clk-m-bdisp-0", - "clk-m-bdisp-1", - "clk-m-icn-bdisp", - "clk-m-icn-compo"; - }; - - clk_m_a2_div2: clk-m-a2-div2 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf2", - "st,clkgena-divmux"; - - clocks = <&clk_m_a2_osc_prediv>, - <&clk_m_a2_pll0 2>, /* PLL0 PHI2 */ - <&clk_m_a2_pll1 2>; /* PLL1 PHI2 */ - - clock-output-names = "clk-m-icn-vdp-2", - "", /* Unused */ - "clk-m-icn-reg-14", - "clk-m-mdtp", - "clk-m-jpegdec", - "", /* Unused */ - "clk-m-dcephy-impctrl", - ""; /* Unused */ - }; - - clk_m_a2_div3: clk-m-a2-div3 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf3", - "st,clkgena-divmux"; - - clocks = <&clk_m_a2_osc_prediv>, - <&clk_m_a2_pll0 3>, /* PLL0 PHI3 */ - <&clk_m_a2_pll1 3>; /* PLL1 PHI3 */ - - clock-output-names = "", /* Unused */ - ""; /* clk-m-apb-pm-11 */ - /* Remaining outputs unused */ - }; - }; - - /* - * A9 PLL - */ - clockgen-a9@fdde08b0 { - reg = <0xfdde08b0 0x70>; - - clockgen_a9_pll: clockgen-a9-pll { - #clock-cells = <1>; - compatible = "st,stih416-plls-c32-a9", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - clock-output-names = "clockgen-a9-pll-odf"; - }; - }; - - /* - * ARM CPU related clocks - */ - clk_m_a9: clk-m-a9@fdde08ac { - #clock-cells = <0>; - compatible = "st,stih416-clkgen-a9-mux", "st,clkgen-mux"; - reg = <0xfdde08ac 0x4>; - clocks = <&clockgen_a9_pll 0>, - <&clockgen_a9_pll 0>, - <&clk_m_a0_div1 2>, - <&clk_m_a9_ext2f_div2>; - }; - - /* - * ARM Peripheral clock for timers - */ - arm_periph_clk: clk-m-a9-periphs { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&clk_m_a9>; - clock-div = <2>; - clock-mult = <1>; - }; - - /* - * Frequency synthesizers on the SASG2 - */ - clockgen_b0: clockgen-b0@fee108b4 { - #clock-cells = <1>; - compatible = "st,stih416-quadfs216", "st,quadfs"; - reg = <0xfee108b4 0x44>; - - clocks = <&clk_sysin>; - clock-output-names = "clk-s-usb48", - "clk-s-dss", - "clk-s-stfe-frc-2", - "clk-s-thsens-scard"; - }; - - clockgen_b1: clockgen-b1@fe8308c4 { - #clock-cells = <1>; - compatible = "st,stih416-quadfs216", "st,quadfs"; - reg = <0xfe8308c4 0x44>; - - clocks = <&clk_sysin>; - clock-output-names = "clk-s-pcm-0", - "clk-s-pcm-1", - "clk-s-pcm-2", - "clk-s-pcm-3"; - }; - - clockgen_c: clockgen-c@fe8307d0 { - #clock-cells = <1>; - compatible = "st,stih416-quadfs432", "st,quadfs"; - reg = <0xfe8307d0 0x44>; - - clocks = <&clk_sysin>; - clock-output-names = "clk-s-c-fs0-ch0", - "clk-s-c-vcc-sd", - "clk-s-c-fs0-ch2"; - }; - - clk_s_vcc_hd: clk-s-vcc-hd@fe8308b8 { - #clock-cells = <0>; - compatible = "st,stih416-clkgenc-vcc-hd", "st,clkgen-mux"; - reg = <0xfe8308b8 0x4>; /* SYSCFG2558 */ - - clocks = <&clk_sysin>, - <&clockgen_c 0>; - }; - - /* - * Add a dummy clock for the HDMI PHY for the VCC input mux - */ - clk_s_tmds_fromphy: clk-s-tmds-fromphy { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - - clockgen_c_vcc: clockgen-c-vcc@fe8308ac { - #clock-cells = <1>; - compatible = "st,stih416-clkgenc", "st,clkgen-vcc"; - reg = <0xfe8308ac 0xc>; /* SYSCFG2555,2556,2557 */ - - clocks = <&clk_s_vcc_hd>, - <&clockgen_c 1>, - <&clk_s_tmds_fromphy>, - <&clockgen_c 2>; - - clock-output-names = "clk-s-pix-hdmi", - "clk-s-pix-dvo", - "clk-s-out-dvo", - "clk-s-pix-hd", - "clk-s-hddac", - "clk-s-denc", - "clk-s-sddac", - "clk-s-pix-main", - "clk-s-pix-aux", - "clk-s-stfe-frc-0", - "clk-s-ref-mcru", - "clk-s-slave-mcru", - "clk-s-tmds-hdmi", - "clk-s-hdmi-reject-pll", - "clk-s-thsens"; - }; - - clockgen_d: clockgen-d@fee107e0 { - #clock-cells = <1>; - compatible = "st,stih416-quadfs216", "st,quadfs"; - reg = <0xfee107e0 0x44>; - - clocks = <&clk_sysin>; - clock-output-names = "clk-s-ccsc", - "clk-s-stfe-frc-1", - "clk-s-tsout-1", - "clk-s-mchi"; - }; - - /* - * Frequency synthesizers on the MPE42 - */ - clockgen_e: clockgen-e@fd3208bc { - #clock-cells = <1>; - compatible = "st,stih416-quadfs660-E", "st,quadfs"; - reg = <0xfd3208bc 0xb0>; - - clocks = <&clk_sysin>; - clock-output-names = "clk-m-pix-mdtp-0", - "clk-m-pix-mdtp-1", - "clk-m-pix-mdtp-2", - "clk-m-mpelpc"; - }; - - clockgen_f: clockgen-f@fd320878 { - #clock-cells = <1>; - compatible = "st,stih416-quadfs660-F", "st,quadfs"; - reg = <0xfd320878 0xf0>; - - clocks = <&clk_sysin>; - clock-output-names = "clk-m-main-vidfs", - "clk-m-hva-fs", - "clk-m-fvdp-vcpu", - "clk-m-fvdp-proc-fs"; - }; - - clk_m_fvdp_proc: clk-m-fvdp-proc@fd320910 { - #clock-cells = <0>; - compatible = "st,stih416-clkgenf-vcc-fvdp", "st,clkgen-mux"; - reg = <0xfd320910 0x4>; /* SYSCFG8580 */ - - clocks = <&clk_m_a1_div2 0>, - <&clockgen_f 3>; - }; - - clk_m_hva: clk-m-hva@fd690868 { - #clock-cells = <0>; - compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux"; - reg = <0xfd690868 0x4>; /* SYSCFG9538 */ - - clocks = <&clockgen_f 1>, - <&clk_m_a1_div0 3>; - }; - - clk_m_f_vcc_hd: clk-m-f-vcc-hd@fd32086c { - #clock-cells = <0>; - compatible = "st,stih416-clkgenf-vcc-hd", "st,clkgen-mux"; - reg = <0xfd32086c 0x4>; /* SYSCFG8539 */ - - clocks = <&clockgen_c_vcc 7>, - <&clockgen_f 0>; - }; - - clk_m_f_vcc_sd: clk-m-f-vcc-sd@fd32086c { - #clock-cells = <0>; - compatible = "st,stih416-clkgenf-vcc-sd", "st,clkgen-mux"; - reg = <0xfd32086c 0x4>; /* SYSCFG8539 */ - - clocks = <&clockgen_c_vcc 8>, - <&clockgen_f 1>; - }; - - /* - * Add a dummy clock for the HDMIRx external signal clock - */ - clk_m_pix_hdmirx_sas: clk-m-pix-hdmirx-sas { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - - clockgen_f_vcc: clockgen-f-vcc@fd32086c { - #clock-cells = <1>; - compatible = "st,stih416-clkgenf", "st,clkgen-vcc"; - reg = <0xfd32086c 0xc>; /* SYSCFG8539,8540,8541 */ - - clocks = <&clk_m_f_vcc_hd>, - <&clk_m_f_vcc_sd>, - <&clockgen_f 0>, - <&clk_m_pix_hdmirx_sas>; - - clock-output-names = "clk-m-pix-main-pipe", - "clk-m-pix-aux-pipe", - "clk-m-pix-main-cru", - "clk-m-pix-aux-cru", - "clk-m-xfer-be-compo", - "clk-m-xfer-pip-compo", - "clk-m-xfer-aux-compo", - "clk-m-vsens", - "clk-m-pix-hdmirx-0", - "clk-m-pix-hdmirx-1"; - }; - - /* - * DDR PLL - */ - clockgen-ddr@0xfdde07d8 { - reg = <0xfdde07d8 0x110>; - - clockgen_ddr_pll: clockgen-ddr-pll { - #clock-cells = <1>; - compatible = "st,stih416-plls-c32-ddr", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - clock-output-names = "clockgen-ddr0", - "clockgen-ddr1"; - }; - }; - - /* - * GPU PLL - */ - clockgen-gpu@fd68ff00 { - reg = <0xfd68ff00 0x910>; - - clockgen_gpu_pll: clockgen-gpu-pll { - #clock-cells = <1>; - compatible = "st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32"; - - clocks = <&clk_sysin>; - clock-output-names = "clockgen-gpu-pll"; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi deleted file mode 100644 index 9c97f7e651a0..000000000000 --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi +++ /dev/null @@ -1,692 +0,0 @@ - -/* - * Copyright (C) 2013 STMicroelectronics Limited. - * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -#include "st-pincfg.h" -#include <dt-bindings/interrupt-controller/arm-gic.h> -/ { - - aliases { - gpio0 = &pio0; - gpio1 = &pio1; - gpio2 = &pio2; - gpio3 = &pio3; - gpio4 = &pio4; - gpio5 = &pio40; - gpio6 = &pio5; - gpio7 = &pio6; - gpio8 = &pio7; - gpio9 = &pio8; - gpio10 = &pio9; - gpio11 = &pio10; - gpio12 = &pio11; - gpio13 = &pio12; - gpio14 = &pio30; - gpio15 = &pio31; - gpio16 = &pio13; - gpio17 = &pio14; - gpio18 = &pio15; - gpio19 = &pio16; - gpio20 = &pio17; - gpio21 = &pio18; - gpio22 = &pio100; - gpio23 = &pio101; - gpio24 = &pio102; - gpio25 = &pio103; - gpio26 = &pio104; - gpio27 = &pio105; - gpio28 = &pio106; - gpio29 = &pio107; - }; - - soc { - pin-controller-sbc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stih416-sbc-pinctrl"; - st,syscfg = <&syscfg_sbc>; - reg = <0xfe61f080 0x4>; - reg-names = "irqmux"; - interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "irqmux"; - ranges = <0 0xfe610000 0x6000>; - - pio0: gpio@fe610000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x100>; - st,bank-name = "PIO0"; - }; - pio1: gpio@fe611000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x100>; - st,bank-name = "PIO1"; - }; - pio2: gpio@fe612000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x100>; - st,bank-name = "PIO2"; - }; - pio3: gpio@fe613000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x3000 0x100>; - st,bank-name = "PIO3"; - }; - pio4: gpio@fe614000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x4000 0x100>; - st,bank-name = "PIO4"; - }; - pio40: gpio@fe615000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x5000 0x100>; - st,bank-name = "PIO40"; - st,retime-pin-mask = <0x7f>; - }; - - rc{ - pinctrl_ir: ir0 { - st,pins { - ir = <&pio4 0 ALT2 IN>; - }; - }; - }; - sbc_serial1 { - pinctrl_sbc_serial1: sbc_serial1 { - st,pins { - tx = <&pio2 6 ALT3 OUT>; - rx = <&pio2 7 ALT3 IN>; - }; - }; - }; - - keyscan { - pinctrl_keyscan: keyscan { - st,pins { - keyin0 = <&pio0 2 ALT2 IN>; - keyin1 = <&pio0 3 ALT2 IN>; - keyin2 = <&pio0 4 ALT2 IN>; - keyin3 = <&pio2 6 ALT2 IN>; - - keyout0 = <&pio1 6 ALT2 OUT>; - keyout1 = <&pio1 7 ALT2 OUT>; - keyout2 = <&pio0 6 ALT2 OUT>; - keyout3 = <&pio2 7 ALT2 OUT>; - }; - }; - }; - - sbc_i2c0 { - pinctrl_sbc_i2c0_default: sbc_i2c0-default { - st,pins { - sda = <&pio4 6 ALT1 BIDIR>; - scl = <&pio4 5 ALT1 BIDIR>; - }; - }; - }; - - usb { - pinctrl_usb3: usb3 { - st,pins { - oc-detect = <&pio40 0 ALT1 IN>; - pwr-enable = <&pio40 1 ALT1 OUT>; - }; - }; - }; - - sbc_i2c1 { - pinctrl_sbc_i2c1_default: sbc_i2c1-default { - st,pins { - sda = <&pio3 2 ALT2 BIDIR>; - scl = <&pio3 1 ALT2 BIDIR>; - }; - }; - }; - - gmac1 { - pinctrl_mii1: mii1 { - st,pins { - txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; - col = <&pio0 7 ALT1 IN BYPASS 1000>; - - mdio = <&pio1 0 ALT1 OUT BYPASS 1500>; - mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; - crs = <&pio1 2 ALT1 IN BYPASS 1000>; - mdint = <&pio1 3 ALT1 IN BYPASS 0>; - rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>; - - rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; - phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>; - }; - }; - pinctrl_rgmii1: rgmii1-0 { - st,pins { - txd0 = <&pio0 0 ALT1 OUT DE_IO 500 CLK_A>; - txd1 = <&pio0 1 ALT1 OUT DE_IO 500 CLK_A>; - txd2 = <&pio0 2 ALT1 OUT DE_IO 500 CLK_A>; - txd3 = <&pio0 3 ALT1 OUT DE_IO 500 CLK_A>; - txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>; - txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; - - mdio = <&pio1 0 ALT1 OUT BYPASS 0>; - mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; - rxd0 = <&pio1 4 ALT1 IN DE_IO 500 CLK_A>; - rxd1 = <&pio1 5 ALT1 IN DE_IO 500 CLK_A>; - rxd2 = <&pio1 6 ALT1 IN DE_IO 500 CLK_A>; - rxd3 = <&pio1 7 ALT1 IN DE_IO 500 CLK_A>; - - rxdv = <&pio2 0 ALT1 IN DE_IO 500 CLK_A>; - rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; - phyclk = <&pio2 3 ALT4 OUT NICLK 0 CLK_B>; - - clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>; - }; - }; - }; - - pwm1 { - pinctrl_pwm1_chan0_default: pwm1-0-default { - st,pins { - pwm-out = <&pio3 0 ALT1 OUT>; - pwm-capturein = <&pio3 2 ALT1 IN>; - - }; - }; - pinctrl_pwm1_chan1_default: pwm1-1-default { - st,pins { - pwm-out = <&pio4 4 ALT1 OUT>; - pwm-capturein = <&pio4 3 ALT1 IN>; - }; - }; - pinctrl_pwm1_chan2_default: pwm1-2-default { - st,pins { - pwm-out = <&pio4 6 ALT3 OUT>; - }; - }; - pinctrl_pwm1_chan3_default: pwm1-3-default { - st,pins { - pwm-out = <&pio4 7 ALT3 OUT>; - }; - }; - }; - }; - - pin-controller-front { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stih416-front-pinctrl"; - st,syscfg = <&syscfg_front>; - reg = <0xfee0f080 0x4>; - reg-names = "irqmux"; - interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "irqmux"; - ranges = <0 0xfee00000 0x10000>; - - pio5: gpio@fee00000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x100>; - st,bank-name = "PIO5"; - }; - pio6: gpio@fee01000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x100>; - st,bank-name = "PIO6"; - }; - pio7: gpio@fee02000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x100>; - st,bank-name = "PIO7"; - }; - pio8: gpio@fee03000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x3000 0x100>; - st,bank-name = "PIO8"; - }; - pio9: gpio@fee04000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x4000 0x100>; - st,bank-name = "PIO9"; - }; - pio10: gpio@fee05000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x5000 0x100>; - st,bank-name = "PIO10"; - }; - pio11: gpio@fee06000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x6000 0x100>; - st,bank-name = "PIO11"; - }; - pio12: gpio@fee07000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x7000 0x100>; - st,bank-name = "PIO12"; - }; - pio30: gpio@fee08000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x8000 0x100>; - st,bank-name = "PIO30"; - }; - pio31: gpio@fee09000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x9000 0x100>; - st,bank-name = "PIO31"; - }; - - pwm0 { - pinctrl_pwm0_chan0_default: pwm0-0-default { - st,pins { - pwm-out = <&pio9 7 ALT2 OUT>; - pwm-capturein = <&pio9 6 ALT2 IN>; - }; - }; - }; - - serial2-oe { - pinctrl_serial2_oe: serial2-1 { - st,pins { - output-enable = <&pio11 3 ALT2 OUT>; - }; - }; - }; - - i2c0 { - pinctrl_i2c0_default: i2c0-default { - st,pins { - sda = <&pio9 3 ALT1 BIDIR>; - scl = <&pio9 2 ALT1 BIDIR>; - }; - }; - }; - - usb { - pinctrl_usb0: usb0 { - st,pins { - oc-detect = <&pio9 4 ALT1 IN>; - pwr-enable = <&pio9 5 ALT1 OUT>; - }; - }; - }; - - - i2c1 { - pinctrl_i2c1_default: i2c1-default { - st,pins { - sda = <&pio12 1 ALT1 BIDIR>; - scl = <&pio12 0 ALT1 BIDIR>; - }; - }; - }; - - fsm { - pinctrl_fsm: fsm { - st,pins { - spi-fsm-clk = <&pio12 2 ALT1 OUT>; - spi-fsm-cs = <&pio12 3 ALT1 OUT>; - spi-fsm-mosi = <&pio12 4 ALT1 OUT>; - spi-fsm-miso = <&pio12 5 ALT1 IN>; - spi-fsm-hol = <&pio12 6 ALT1 OUT>; - spi-fsm-wp = <&pio12 7 ALT1 OUT>; - }; - }; - }; - }; - - pin-controller-rear { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stih416-rear-pinctrl"; - st,syscfg = <&syscfg_rear>; - reg = <0xfe82f080 0x4>; - reg-names = "irqmux"; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "irqmux"; - ranges = <0 0xfe820000 0x6000>; - - pio13: gpio@fe820000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x100>; - st,bank-name = "PIO13"; - }; - pio14: gpio@fe821000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x100>; - st,bank-name = "PIO14"; - }; - pio15: gpio@fe822000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x100>; - st,bank-name = "PIO15"; - }; - pio16: gpio@fe823000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x3000 0x100>; - st,bank-name = "PIO16"; - }; - pio17: gpio@fe824000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x4000 0x100>; - st,bank-name = "PIO17"; - }; - pio18: gpio@fe825000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x5000 0x100>; - st,bank-name = "PIO18"; - st,retime-pin-mask = <0xf>; - }; - - serial2 { - pinctrl_serial2: serial2-0 { - st,pins { - tx = <&pio17 4 ALT2 OUT>; - rx = <&pio17 5 ALT2 IN>; - }; - }; - }; - - gmac0 { - pinctrl_mii0: mii0 { - st,pins { - mdint = <&pio13 6 ALT2 IN BYPASS 0>; - txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>; - txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>; - - txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>; - txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - crs = <&pio15 2 ALT2 IN BYPASS 1000>; - col = <&pio15 3 ALT2 IN BYPASS 1000>; - mdio= <&pio15 4 ALT2 OUT BYPASS 1500>; - mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>; - - rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>; - phyclk = <&pio13 5 ALT2 OUT NICLK 0 CLK_B>; - }; - }; - - pinctrl_gmii0: gmii0 { - st,pins { - }; - }; - pinctrl_rgmii0: rgmii0 { - st,pins { - phyclk = <&pio13 5 ALT4 OUT NICLK 0 CLK_B>; - txen = <&pio13 7 ALT2 OUT DE_IO 0 CLK_A>; - txd0 = <&pio14 0 ALT2 OUT DE_IO 500 CLK_A>; - txd1 = <&pio14 1 ALT2 OUT DE_IO 500 CLK_A>; - txd2 = <&pio14 2 ALT2 OUT DE_IO 500 CLK_B>; - txd3 = <&pio14 3 ALT2 OUT DE_IO 500 CLK_B>; - txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>; - - mdio = <&pio15 4 ALT2 OUT BYPASS 0>; - mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>; - - rxdv = <&pio15 6 ALT2 IN DE_IO 500 CLK_A>; - rxd0 =<&pio16 0 ALT2 IN DE_IO 500 CLK_A>; - rxd1 =<&pio16 1 ALT2 IN DE_IO 500 CLK_A>; - rxd2 =<&pio16 2 ALT2 IN DE_IO 500 CLK_A>; - rxd3 =<&pio16 3 ALT2 IN DE_IO 500 CLK_A>; - rxclk =<&pio17 0 ALT2 IN NICLK 0 CLK_A>; - - clk125=<&pio17 6 ALT1 IN NICLK 0 CLK_A>; - }; - }; - }; - - mmc0 { - pinctrl_mmc0: mmc0 { - st,pins { - mmcclk = <&pio13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>; - data0 = <&pio14 4 ALT4 BIDIR_PU BYPASS 0>; - data1 = <&pio14 5 ALT4 BIDIR_PU BYPASS 0>; - data2 = <&pio14 6 ALT4 BIDIR_PU BYPASS 0>; - data3 = <&pio14 7 ALT4 BIDIR_PU BYPASS 0>; - cmd = <&pio15 1 ALT4 BIDIR_PU BYPASS 0>; - wp = <&pio15 3 ALT4 IN>; - data4 = <&pio16 4 ALT4 BIDIR_PU BYPASS 0>; - data5 = <&pio16 5 ALT4 BIDIR_PU BYPASS 0>; - data6 = <&pio16 6 ALT4 BIDIR_PU BYPASS 0>; - data7 = <&pio16 7 ALT4 BIDIR_PU BYPASS 0>; - pwr = <&pio17 1 ALT4 OUT>; - cd = <&pio17 2 ALT4 IN>; - led = <&pio17 3 ALT4 OUT>; - }; - }; - }; - mmc1 { - pinctrl_mmc1: mmc1 { - st,pins { - mmcclk = <&pio15 0 ALT3 BIDIR_PU NICLK 0 CLK_B>; - data0 = <&pio13 7 ALT3 BIDIR_PU BYPASS 0>; - data1 = <&pio14 1 ALT3 BIDIR_PU BYPASS 0>; - data2 = <&pio14 2 ALT3 BIDIR_PU BYPASS 0>; - data3 = <&pio14 3 ALT3 BIDIR_PU BYPASS 0>; - cmd = <&pio15 4 ALT3 BIDIR_PU BYPASS 0>; - data4 = <&pio15 6 ALT3 BIDIR_PU BYPASS 0>; - data5 = <&pio15 7 ALT3 BIDIR_PU BYPASS 0>; - data6 = <&pio16 0 ALT3 BIDIR_PU BYPASS 0>; - data7 = <&pio16 1 ALT3 BIDIR_PU BYPASS 0>; - pwr = <&pio16 2 ALT3 OUT>; - nreset = <&pio13 6 ALT3 OUT>; - }; - }; - }; - - usb { - pinctrl_usb1: usb1 { - st,pins { - oc-detect = <&pio18 0 ALT1 IN>; - pwr-enable = <&pio18 1 ALT1 OUT>; - }; - }; - pinctrl_usb2: usb2 { - st,pins { - oc-detect = <&pio18 2 ALT1 IN>; - pwr-enable = <&pio18 3 ALT1 OUT>; - }; - }; - }; - - pwm0 { - pinctrl_pwm0_chan1_default: pwm0-1-default { - st,pins { - pwm-out = <&pio13 2 ALT2 OUT>; - pwm-capturein = <&pio13 1 ALT2 IN>; - }; - }; - pinctrl_pwm0_chan2_default: pwm0-2-default { - st,pins { - pwm-out = <&pio15 2 ALT4 OUT>; - }; - }; - pinctrl_pwm0_chan3_default: pwm0-3-default { - st,pins { - pwm-out = <&pio17 4 ALT1 OUT>; - }; - }; - }; - - }; - - pin-controller-fvdp-fe { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stih416-fvdp-fe-pinctrl"; - st,syscfg = <&syscfg_fvdp_fe>; - reg = <0xfd6bf080 0x4>; - reg-names = "irqmux"; - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "irqmux"; - ranges = <0 0xfd6b0000 0x3000>; - - pio100: gpio@fd6b0000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x100>; - st,bank-name = "PIO100"; - }; - pio101: gpio@fd6b1000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x100>; - st,bank-name = "PIO101"; - }; - pio102: gpio@fd6b2000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x100>; - st,bank-name = "PIO102"; - }; - }; - - pin-controller-fvdp-lite { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stih416-fvdp-lite-pinctrl"; - st,syscfg = <&syscfg_fvdp_lite>; - reg = <0xfd33f080 0x4>; - reg-names = "irqmux"; - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "irqmux"; - ranges = <0 0xfd330000 0x5000>; - - pio103: gpio@fd330000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x100>; - st,bank-name = "PIO103"; - }; - pio104: gpio@fd331000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x100>; - st,bank-name = "PIO104"; - }; - pio105: gpio@fd332000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x100>; - st,bank-name = "PIO105"; - }; - pio106: gpio@fd333000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x3000 0x100>; - st,bank-name = "PIO106"; - }; - - pio107: gpio@fd334000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x4000 0x100>; - st,bank-name = "PIO107"; - st,retime-pin-mask = <0xf>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi deleted file mode 100644 index fe1f9cf770e4..000000000000 --- a/arch/arm/boot/dts/stih416.dtsi +++ /dev/null @@ -1,517 +0,0 @@ -/* - * Copyright (C) 2012 STMicroelectronics Limited. - * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -#include "stih41x.dtsi" -#include "stih416-clock.dtsi" -#include "stih416-pinctrl.dtsi" - -#include <dt-bindings/phy/phy.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/reset/stih416-resets.h> -#include <dt-bindings/interrupt-controller/irq-st.h> -/ { - L2: cache-controller { - compatible = "arm,pl310-cache"; - reg = <0xfffe2000 0x1000>; - arm,data-latency = <3 3 3>; - arm,tag-latency = <2 2 2>; - cache-unified; - cache-level = <2>; - }; - - arm-pmu { - compatible = "arm,cortex-a9-pmu"; - interrupt-parent = <&intc>; - interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; - }; - - soc { - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&intc>; - ranges; - compatible = "simple-bus"; - - restart { - compatible = "st,stih416-restart"; - st,syscfg = <&syscfg_sbc>; - status = "okay"; - }; - - powerdown: powerdown-controller { - #reset-cells = <1>; - compatible = "st,stih416-powerdown"; - }; - - softreset: softreset-controller { - #reset-cells = <1>; - compatible = "st,stih416-softreset"; - }; - - syscfg_sbc:sbc-syscfg@fe600000{ - compatible = "st,stih416-sbc-syscfg", "syscon"; - reg = <0xfe600000 0x1000>; - }; - - syscfg_front:front-syscfg@fee10000{ - compatible = "st,stih416-front-syscfg", "syscon"; - reg = <0xfee10000 0x1000>; - }; - - syscfg_rear:rear-syscfg@fe830000{ - compatible = "st,stih416-rear-syscfg", "syscon"; - reg = <0xfe830000 0x1000>; - }; - - /* MPE */ - syscfg_fvdp_fe:fvdp-fe-syscfg@fddf0000{ - compatible = "st,stih416-fvdp-fe-syscfg", "syscon"; - reg = <0xfddf0000 0x1000>; - }; - - syscfg_fvdp_lite:fvdp-lite-syscfg@fd6a0000{ - compatible = "st,stih416-fvdp-lite-syscfg", "syscon"; - reg = <0xfd6a0000 0x1000>; - }; - - syscfg_cpu:cpu-syscfg@fdde0000{ - compatible = "st,stih416-cpu-syscfg", "syscon"; - reg = <0xfdde0000 0x1000>; - }; - - syscfg_compo:compo-syscfg@fd320000{ - compatible = "st,stih416-compo-syscfg", "syscon"; - reg = <0xfd320000 0x1000>; - }; - - syscfg_transport:transport-syscfg@fd690000{ - compatible = "st,stih416-transport-syscfg", "syscon"; - reg = <0xfd690000 0x1000>; - }; - - syscfg_lpm:lpm-syscfg@fe4b5100{ - compatible = "st,stih416-lpm-syscfg", "syscon"; - reg = <0xfe4b5100 0x8>; - }; - - irq-syscfg { - compatible = "st,stih416-irq-syscfg"; - st,syscfg = <&syscfg_cpu>; - st,irq-device = <ST_IRQ_SYSCFG_PMU_0>, - <ST_IRQ_SYSCFG_PMU_1>; - st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>, - <ST_IRQ_SYSCFG_DISABLED>; - }; - - serial2: serial@fed32000{ - compatible = "st,asc"; - status = "disabled"; - reg = <0xfed32000 0x2c>; - interrupts = <0 197 0>; - clocks = <&clk_s_a0_ls CLK_ICN_REG>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_serial2 &pinctrl_serial2_oe>; - }; - - /* SBC_UART1 */ - sbc_serial1: serial@fe531000 { - compatible = "st,asc"; - status = "disabled"; - reg = <0xfe531000 0x2c>; - interrupts = <0 210 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sbc_serial1>; - clocks = <&clk_sysin>; - }; - - i2c@fed40000 { - compatible = "st,comms-ssc4-i2c"; - reg = <0xfed40000 0x110>; - interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_s_a0_ls CLK_ICN_REG>; - clock-names = "ssc"; - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0_default>; - - status = "disabled"; - }; - - i2c@fed41000 { - compatible = "st,comms-ssc4-i2c"; - reg = <0xfed41000 0x110>; - interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_s_a0_ls CLK_ICN_REG>; - clock-names = "ssc"; - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_default>; - - status = "disabled"; - }; - - i2c@fe540000 { - compatible = "st,comms-ssc4-i2c"; - reg = <0xfe540000 0x110>; - interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_sysin>; - clock-names = "ssc"; - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sbc_i2c0_default>; - - status = "disabled"; - }; - - i2c@fe541000 { - compatible = "st,comms-ssc4-i2c"; - reg = <0xfe541000 0x110>; - interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_sysin>; - clock-names = "ssc"; - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sbc_i2c1_default>; - - status = "disabled"; - }; - - ethernet0: dwmac@fe810000 { - device_type = "network"; - compatible = "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710"; - status = "disabled"; - reg = <0xfe810000 0x8000>; - reg-names = "stmmaceth"; - - interrupts = <0 133 0>, <0 134 0>, <0 135 0>; - interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; - - snps,pbl = <32>; - snps,mixed-burst; - - st,syscon = <&syscfg_rear 0x8bc>; - resets = <&softreset STIH416_ETH0_SOFTRESET>; - reset-names = "stmmaceth"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mii0>; - clock-names = "stmmaceth", "sti-ethclk"; - clocks = <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>; - }; - - ethernet1: dwmac@fef08000 { - device_type = "network"; - compatible = "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710"; - status = "disabled"; - reg = <0xfef08000 0x8000>; - reg-names = "stmmaceth"; - interrupts = <0 136 0>, <0 137 0>, <0 138 0>; - interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; - - snps,pbl = <32>; - snps,mixed-burst; - - st,syscon = <&syscfg_sbc 0x7f0>; - - resets = <&softreset STIH416_ETH1_SOFTRESET>; - reset-names = "stmmaceth"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mii1>; - clock-names = "stmmaceth", "sti-ethclk"; - clocks = <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>; - }; - - rc: rc@fe518000 { - compatible = "st,comms-irb"; - reg = <0xfe518000 0x234>; - interrupts = <0 203 0>; - rx-mode = "infrared"; - clocks = <&clk_sysin>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ir>; - resets = <&softreset STIH416_IRB_SOFTRESET>; - }; - - /* FSM */ - spifsm: spifsm@fe902000 { - compatible = "st,spi-fsm"; - reg = <0xfe902000 0x1000>; - pinctrl-0 = <&pinctrl_fsm>; - - st,syscfg = <&syscfg_rear>; - st,boot-device-reg = <0x958>; - st,boot-device-spi = <0x1a>; - - status = "disabled"; - }; - - keyscan: keyscan@fe4b0000 { - compatible = "st,sti-keyscan"; - status = "disabled"; - reg = <0xfe4b0000 0x2000>; - interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>; - clocks = <&clk_sysin>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_keyscan>; - resets = <&powerdown STIH416_KEYSCAN_POWERDOWN>, - <&softreset STIH416_KEYSCAN_SOFTRESET>; - }; - - temp0 { - compatible = "st,stih416-sas-thermal"; - clock-names = "thermal"; - clocks = <&clockgen_c_vcc 14>; - - status = "okay"; - }; - - temp1@fdfe8000 { - compatible = "st,stih416-mpe-thermal"; - reg = <0xfdfe8000 0x10>; - clocks = <&clockgen_e 3>; - clock-names = "thermal"; - interrupts = <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>; - - status = "okay"; - }; - - mmc0: sdhci@fe81e000 { - compatible = "st,sdhci"; - status = "disabled"; - reg = <0xfe81e000 0x1000>; - interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>; - interrupt-names = "mmcirq"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mmc0>; - clock-names = "mmc"; - clocks = <&clk_s_a1_ls 1>; - }; - - mmc1: sdhci@fe81f000 { - compatible = "st,sdhci"; - status = "disabled"; - reg = <0xfe81f000 0x1000>; - interrupts = <GIC_SPI 128 IRQ_TYPE_NONE>; - interrupt-names = "mmcirq"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mmc1>; - clock-names = "mmc"; - clocks = <&clk_s_a1_ls 8>; - }; - - miphy365x_phy: phy@fe382000 { - compatible = "st,miphy365x-phy"; - st,syscfg = <&syscfg_rear 0x824 0x828>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - phy_port0: port@fe382000 { - #phy-cells = <1>; - reg = <0xfe382000 0x100>, <0xfe394000 0x100>; - reg-names = "sata", "pcie"; - }; - - phy_port1: port@fe38a000 { - #phy-cells = <1>; - reg = <0xfe38a000 0x100>, <0xfe804000 0x100>; - reg-names = "sata", "pcie"; - }; - }; - - sata0: sata@fe380000 { - compatible = "st,sti-ahci"; - reg = <0xfe380000 0x1000>; - interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>; - interrupt-names = "hostc"; - phys = <&phy_port0 PHY_TYPE_SATA>; - phy-names = "sata-phy"; - resets = <&powerdown STIH416_SATA0_POWERDOWN>, - <&softreset STIH416_SATA0_SOFTRESET>; - reset-names = "pwr-dwn", "sw-rst"; - clock-names = "ahci_clk"; - clocks = <&clk_s_a0_ls CLK_ICN_REG>; - - status = "disabled"; - }; - - usb2_phy: phy@0 { - compatible = "st,stih416-usb-phy"; - #phy-cells = <0>; - st,syscfg = <&syscfg_rear>; - clocks = <&clk_sysin>; - clock-names = "osc_phy"; - }; - - ehci0: usb@fe1ffe00 { - compatible = "st,st-ehci-300x"; - reg = <0xfe1ffe00 0x100>; - interrupts = <GIC_SPI 148 IRQ_TYPE_NONE>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb0>; - clocks = <&clk_s_a1_ls 0>, - <&clockgen_b0 0>; - clock-names = "ic", "clk48"; - phys = <&usb2_phy>; - phy-names = "usb"; - resets = <&powerdown STIH416_USB0_POWERDOWN>, - <&softreset STIH416_USB0_SOFTRESET>; - reset-names = "power", "softreset"; - }; - - ohci0: usb@fe1ffc00 { - compatible = "st,st-ohci-300x"; - reg = <0xfe1ffc00 0x100>; - interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>; - clocks = <&clk_s_a1_ls 0>, - <&clockgen_b0 0>; - clock-names = "ic", "clk48"; - phys = <&usb2_phy>; - phy-names = "usb"; - status = "okay"; - resets = <&powerdown STIH416_USB0_POWERDOWN>, - <&softreset STIH416_USB0_SOFTRESET>; - reset-names = "power", "softreset"; - }; - - ehci1: usb@fe203e00 { - compatible = "st,st-ehci-300x"; - reg = <0xfe203e00 0x100>; - interrupts = <GIC_SPI 150 IRQ_TYPE_NONE>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb1>; - clocks = <&clk_s_a1_ls 0>, - <&clockgen_b0 0>; - clock-names = "ic", "clk48"; - phys = <&usb2_phy>; - phy-names = "usb"; - resets = <&powerdown STIH416_USB1_POWERDOWN>, - <&softreset STIH416_USB1_SOFTRESET>; - reset-names = "power", "softreset"; - }; - - ohci1: usb@fe203c00 { - compatible = "st,st-ohci-300x"; - reg = <0xfe203c00 0x100>; - interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; - clocks = <&clk_s_a1_ls 0>, - <&clockgen_b0 0>; - clock-names = "ic", "clk48"; - phys = <&usb2_phy>; - phy-names = "usb"; - resets = <&powerdown STIH416_USB1_POWERDOWN>, - <&softreset STIH416_USB1_SOFTRESET>; - reset-names = "power", "softreset"; - }; - - ehci2: usb@fe303e00 { - compatible = "st,st-ehci-300x"; - reg = <0xfe303e00 0x100>; - interrupts = <GIC_SPI 152 IRQ_TYPE_NONE>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb2>; - clocks = <&clk_s_a1_ls 0>, - <&clockgen_b0 0>; - clock-names = "ic", "clk48"; - phys = <&usb2_phy>; - phy-names = "usb"; - resets = <&powerdown STIH416_USB2_POWERDOWN>, - <&softreset STIH416_USB2_SOFTRESET>; - reset-names = "power", "softreset"; - }; - - ohci2: usb@fe303c00 { - compatible = "st,st-ohci-300x"; - reg = <0xfe303c00 0x100>; - interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>; - clocks = <&clk_s_a1_ls 0>, - <&clockgen_b0 0>; - clock-names = "ic", "clk48"; - phys = <&usb2_phy>; - phy-names = "usb"; - resets = <&powerdown STIH416_USB2_POWERDOWN>, - <&softreset STIH416_USB2_SOFTRESET>; - reset-names = "power", "softreset"; - }; - - ehci3: usb@fe343e00 { - compatible = "st,st-ehci-300x"; - reg = <0xfe343e00 0x100>; - interrupts = <GIC_SPI 154 IRQ_TYPE_NONE>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb3>; - clocks = <&clk_s_a1_ls 0>, - <&clockgen_b0 0>; - clock-names = "ic", "clk48"; - phys = <&usb2_phy>; - phy-names = "usb"; - resets = <&powerdown STIH416_USB3_POWERDOWN>, - <&softreset STIH416_USB3_SOFTRESET>; - reset-names = "power", "softreset"; - }; - - ohci3: usb@fe343c00 { - compatible = "st,st-ohci-300x"; - reg = <0xfe343c00 0x100>; - interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>; - clocks = <&clk_s_a1_ls 0>, - <&clockgen_b0 0>; - clock-names = "ic", "clk48"; - phys = <&usb2_phy>; - phy-names = "usb"; - resets = <&powerdown STIH416_USB3_POWERDOWN>, - <&softreset STIH416_USB3_SOFTRESET>; - reset-names = "power", "softreset"; - }; - - /* SAS PWM Module */ - pwm0: pwm@fed10000 { - compatible = "st,sti-pwm"; - status = "disabled"; - #pwm-cells = <2>; - reg = <0xfed10000 0x68>; - interrupts = <GIC_SPI 200 IRQ_TYPE_NONE>; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm0_chan0_default - &pinctrl_pwm0_chan1_default - &pinctrl_pwm0_chan2_default - &pinctrl_pwm0_chan3_default>; - - clock-names = "pwm", "capture"; - clocks = <&clk_sysin>, <&clk_s_a0_ls CLK_ICN_REG>; - - st,pwm-num-chan = <4>; - st,capture-num-chan = <2>; - }; - - /* SBC PWM Module */ - pwm1: pwm@fe510000 { - compatible = "st,sti-pwm"; - status = "disabled"; - #pwm-cells = <2>; - reg = <0xfe510000 0x68>; - interrupts = <GIC_SPI 202 IRQ_TYPE_NONE>; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm1_chan0_default - /* - * Shared with SBC_OBS_NOTRST. Don't - * enable unless you really know what - * you're doing. - * - * &pinctrl_pwm1_chan1_default - */ - &pinctrl_pwm1_chan2_default - &pinctrl_pwm1_chan3_default>; - - clock-names = "pwm"; - clocks = <&clk_sysin>; - st,pwm-num-chan = <3>; - }; - }; -}; diff --git a/arch/arm/boot/dts/stih41x-b2000.dtsi b/arch/arm/boot/dts/stih41x-b2000.dtsi deleted file mode 100644 index 9bfa0674b452..000000000000 --- a/arch/arm/boot/dts/stih41x-b2000.dtsi +++ /dev/null @@ -1,96 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics (R&D) Limited. - * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/gpio.h> - -/ { - - memory{ - device_type = "memory"; - reg = <0x60000000 0x40000000>; - }; - - chosen { - bootargs = "console=ttyAS0,115200 clk_ignore_unused"; - linux,stdout-path = &serial2; - }; - - aliases { - ttyAS0 = &serial2; - ethernet0 = ðernet0; - ethernet1 = ðernet1; - }; - - soc { - serial2: serial@fed32000 { - status = "okay"; - }; - - leds { - compatible = "gpio-leds"; - fp_led { - label = "Front Panel LED"; - gpios = <&pio105 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - /* HDMI Tx I2C */ - i2c@fed41000 { - /* HDMI V1.3a supports Standard mode only */ - clock-frequency = <100000>; - i2c-min-scl-pulse-width-us = <0>; - i2c-min-sda-pulse-width-us = <5>; - - status = "okay"; - }; - - ethernet0: dwmac@fe810000 { - status = "okay"; - phy-mode = "mii"; - pinctrl-0 = <&pinctrl_mii0>; - - snps,reset-gpio = <&pio106 2>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 10000>; - }; - - ethernet1: dwmac@fef08000 { - status = "disabled"; - phy-mode = "mii"; - st,tx-retime-src = "txclk"; - - snps,reset-gpio = <&pio4 7>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 10000>; - }; - - keyscan: keyscan@fe4b0000 { - keypad,num-rows = <4>; - keypad,num-columns = <4>; - st,debounce-us = <5000>; - linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_F13) - MATRIX_KEY(0x00, 0x01, KEY_F9) - MATRIX_KEY(0x00, 0x02, KEY_F5) - MATRIX_KEY(0x00, 0x03, KEY_F1) - MATRIX_KEY(0x01, 0x00, KEY_F14) - MATRIX_KEY(0x01, 0x01, KEY_F10) - MATRIX_KEY(0x01, 0x02, KEY_F6) - MATRIX_KEY(0x01, 0x03, KEY_F2) - MATRIX_KEY(0x02, 0x00, KEY_F15) - MATRIX_KEY(0x02, 0x01, KEY_F11) - MATRIX_KEY(0x02, 0x02, KEY_F7) - MATRIX_KEY(0x02, 0x03, KEY_F3) - MATRIX_KEY(0x03, 0x00, KEY_F16) - MATRIX_KEY(0x03, 0x01, KEY_F12) - MATRIX_KEY(0x03, 0x02, KEY_F8) - MATRIX_KEY(0x03, 0x03, KEY_F4) >; - }; - }; -}; diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi deleted file mode 100644 index 322e0e95176c..000000000000 --- a/arch/arm/boot/dts/stih41x-b2020.dtsi +++ /dev/null @@ -1,82 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics (R&D) Limited. - * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -#include "stih41x-b2020x.dtsi" -#include <dt-bindings/gpio/gpio.h> -/ { - memory{ - device_type = "memory"; - reg = <0x40000000 0x80000000>; - }; - - chosen { - bootargs = "console=ttyAS0,115200 clk_ignore_unused"; - linux,stdout-path = &sbc_serial1; - }; - - aliases { - ttyAS0 = &sbc_serial1; - ethernet1 = ðernet1; - }; - soc { - sbc_serial1: serial@fe531000 { - status = "okay"; - }; - - leds { - compatible = "gpio-leds"; - red { - label = "Front Panel LED"; - gpios = <&pio4 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - green { - gpios = <&pio4 7 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; - - i2c@fed40000 { - status = "okay"; - }; - - /* HDMI Tx I2C */ - i2c@fed41000 { - /* HDMI V1.3a supports Standard mode only */ - clock-frequency = <100000>; - i2c-min-scl-pulse-width-us = <0>; - i2c-min-sda-pulse-width-us = <5>; - - status = "okay"; - }; - - i2c@fe540000 { - status = "okay"; - }; - - i2c@fe541000 { - status = "okay"; - }; - - ethernet1: dwmac@fef08000 { - status = "okay"; - phy-mode = "rgmii-id"; - max-speed = <1000>; - st,tx-retime-src = "clk_125"; - snps,reset-gpio = <&pio3 0>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 10000>; - - pinctrl-0 = <&pinctrl_rgmii1>; - }; - - mmc0: sdhci@fe81e000 { - bus-width = <8>; - }; - }; -}; diff --git a/arch/arm/boot/dts/stih41x-b2020x.dtsi b/arch/arm/boot/dts/stih41x-b2020x.dtsi deleted file mode 100644 index f797a0607382..000000000000 --- a/arch/arm/boot/dts/stih41x-b2020x.dtsi +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics (R&D) Limited. - * Author: Lee Jones <lee.jones@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -/ { - soc { - mmc0: sdhci@fe81e000 { - status = "okay"; - }; - - spifsm: spifsm@fe902000 { - #address-cells = <1>; - #size-cells = <1>; - - status = "okay"; - - partition@0 { - label = "SerialFlash1"; - reg = <0x00000000 0x00500000>; - }; - - partition@500000 { - label = "SerialFlash2"; - reg = <0x00500000 0x00b00000>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/stih41x.dtsi b/arch/arm/boot/dts/stih41x.dtsi deleted file mode 100644 index 5cb0e63376b5..000000000000 --- a/arch/arm/boot/dts/stih41x.dtsi +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Copyright (C) 2014 STMicroelectronics Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -/ { - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0>; - }; - cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <1>; - }; - }; - - intc: interrupt-controller@fffe1000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0xfffe1000 0x1000>, - <0xfffe0100 0x100>; - }; - - scu@fffe0000 { - compatible = "arm,cortex-a9-scu"; - reg = <0xfffe0000 0x1000>; - }; - - timer@fffe0200 { - interrupt-parent = <&intc>; - compatible = "arm,cortex-a9-global-timer"; - reg = <0xfffe0200 0x100>; - interrupts = <1 11 0x04>; - clocks = <&arm_periph_clk>; - }; -}; diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi index ed2b7a99ecff..4b8f62f89664 100644 --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi @@ -135,6 +135,10 @@ }; }; + sti_uni_player0: sti-uni-player@8d80000 { + status = "okay"; + }; + sti_uni_player2: sti-uni-player@8d82000 { status = "okay"; }; @@ -151,13 +155,26 @@ sound { compatible = "simple-audio-card"; - simple-audio-card,name = "sti audio card"; + simple-audio-card,name = "STI-B2120"; status = "okay"; simple-audio-card,dai-link@0 { + /* HDMI */ + format = "i2s"; + mclk-fs = <128>; + cpu { + sound-dai = <&sti_uni_player0>; + }; + + codec { + sound-dai = <&sti_hdmi>; + }; + }; + simple-audio-card,dai-link@1 { /* DAC */ format = "i2s"; mclk-fs = <256>; + frame-inversion = <1>; cpu { sound-dai = <&sti_uni_player2>; }; @@ -166,7 +183,7 @@ sound-dai = <&sti_sasg_codec 1>; }; }; - simple-audio-card,dai-link@1 { + simple-audio-card,dai-link@2 { /* SPDIF */ format = "left_j"; mclk-fs = <128>; diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index 6bfc5959dac3..3c99466989b1 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -47,6 +47,7 @@ /dts-v1/; #include "stm32f429.dtsi" +#include <dt-bindings/input/input.h> / { model = "STMicroelectronics STM32429i-EVAL board"; @@ -65,6 +66,24 @@ serial0 = &usart1; }; + soc { + dma-ranges = <0xc0000000 0x0 0x10000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_vref: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vref"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + leds { compatible = "gpio-leds"; green { @@ -82,23 +101,58 @@ }; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + button@0 { + label = "Wake up"; + linux,code = <KEY_WAKEUP>; + gpios = <&gpioa 0 0>; + }; + button@1 { + label = "Tamper"; + linux,code = <KEY_RESTART>; + gpios = <&gpioc 13 0>; + }; + }; + usbotg_hs_phy: usbphy { #phy-cells = <0>; compatible = "usb-nop-xceiv"; - clocks = <&rcc 0 30>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHSULPI)>; clock-names = "main_clk"; }; }; +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&adc3_in8_pin>; + vref-supply = <®_vref>; + status = "okay"; + adc3: adc@200 { + st,adc-channels = <8>; + status = "okay"; + }; +}; + &clk_hse { clock-frequency = <25000000>; }; -ðernet0 { +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; status = "okay"; - pinctrl-0 = <ðernet0_mii>; +}; + +&mac { + status = "okay"; + pinctrl-0 = <ðernet_mii>; pinctrl-names = "default"; - phy-mode = "mii-id"; + phy-mode = "mii"; + phy-handle = <&phy1>; mdio0 { #address-cells = <1>; #size-cells = <0>; @@ -109,6 +163,10 @@ }; }; +&rtc { + status = "okay"; +}; + &usart1 { pinctrl-0 = <&usart1_pins_a>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts new file mode 100644 index 000000000000..aa03fac1ec55 --- /dev/null +++ b/arch/arm/boot/dts/stm32746g-eval.dts @@ -0,0 +1,96 @@ +/* + * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "stm32f746.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "STMicroelectronics STM32746g-EVAL board"; + compatible = "st,stm32746g-eval", "st,stm32f746"; + + chosen { + bootargs = "root=/dev/ram"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0xc0000000 0x2000000>; + }; + + aliases { + serial0 = &usart1; + }; + + leds { + compatible = "gpio-leds"; + green { + gpios = <&gpiof 10 1>; + linux,default-trigger = "heartbeat"; + }; + red { + gpios = <&gpiob 7 1>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + button@0 { + label = "Wake up"; + linux,code = <KEY_WAKEUP>; + gpios = <&gpioc 13 0>; + }; + }; +}; + +&clk_hse { + clock-frequency = <25000000>; +}; + +&usart1 { + pinctrl-0 = <&usart1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts index 01408073dd53..9222b9f37bc0 100644 --- a/arch/arm/boot/dts/stm32f429-disco.dts +++ b/arch/arm/boot/dts/stm32f429-disco.dts @@ -47,6 +47,7 @@ /dts-v1/; #include "stm32f429.dtsi" +#include <dt-bindings/input/input.h> / { model = "STMicroelectronics STM32F429i-DISCO board"; @@ -75,12 +76,30 @@ linux,default-trigger = "heartbeat"; }; }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + button@0 { + label = "User"; + linux,code = <KEY_HOME>; + gpios = <&gpioa 0 0>; + }; + }; }; &clk_hse { clock-frequency = <8000000>; }; +&rtc { + assigned-clocks = <&rcc 1 CLK_RTC>; + assigned-clock-parents = <&rcc 1 CLK_LSI>; + status = "okay"; +}; + &usart1 { pinctrl-0 = <&usart1_pins_a>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index 336ee4fb587d..ee0da970e8ad 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -48,6 +48,8 @@ #include "skeleton.dtsi" #include "armv7-m.dtsi" #include <dt-bindings/pinctrl/stm32f429-pinfunc.h> +#include <dt-bindings/clock/stm32fx-clock.h> +#include <dt-bindings/mfd/stm32f4-rcc.h> / { clocks { @@ -56,55 +58,252 @@ compatible = "fixed-clock"; clock-frequency = <0>; }; + + clk-lse { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + clk-lsi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32000>; + }; + + clk_i2s_ckin: i2s-ckin { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; }; soc { - dma-ranges = <0xc0000000 0x0 0x10000000>; - timer2: timer@40000000 { compatible = "st,stm32-timer"; reg = <0x40000000 0x400>; interrupts = <28>; - clocks = <&rcc 0 128>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>; + status = "disabled"; + }; + + timers2: timers@40000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000000 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>; + clock-names = "int"; status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@1 { + compatible = "st,stm32-timer-trigger"; + reg = <1>; + status = "disabled"; + }; }; timer3: timer@40000400 { compatible = "st,stm32-timer"; reg = <0x40000400 0x400>; interrupts = <29>; - clocks = <&rcc 0 129>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>; status = "disabled"; }; + timers3: timers@40000400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000400 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@2 { + compatible = "st,stm32-timer-trigger"; + reg = <2>; + status = "disabled"; + }; + }; + timer4: timer@40000800 { compatible = "st,stm32-timer"; reg = <0x40000800 0x400>; interrupts = <30>; - clocks = <&rcc 0 130>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>; status = "disabled"; }; + timers4: timers@40000800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000800 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@3 { + compatible = "st,stm32-timer-trigger"; + reg = <3>; + status = "disabled"; + }; + }; + timer5: timer@40000c00 { compatible = "st,stm32-timer"; reg = <0x40000c00 0x400>; interrupts = <50>; - clocks = <&rcc 0 131>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>; + }; + + timers5: timers@40000c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000C00 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@4 { + compatible = "st,stm32-timer-trigger"; + reg = <4>; + status = "disabled"; + }; }; timer6: timer@40001000 { compatible = "st,stm32-timer"; reg = <0x40001000 0x400>; interrupts = <54>; - clocks = <&rcc 0 132>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>; status = "disabled"; }; + timers6: timers@40001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001000 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>; + clock-names = "int"; + status = "disabled"; + + timer@5 { + compatible = "st,stm32-timer-trigger"; + reg = <5>; + status = "disabled"; + }; + }; + timer7: timer@40001400 { compatible = "st,stm32-timer"; reg = <0x40001400 0x400>; interrupts = <55>; - clocks = <&rcc 0 133>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>; + status = "disabled"; + }; + + timers7: timers@40001400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001400 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>; + clock-names = "int"; + status = "disabled"; + + timer@6 { + compatible = "st,stm32-timer-trigger"; + reg = <6>; + status = "disabled"; + }; + }; + + timers12: timers@40001800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001800 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM12)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@11 { + compatible = "st,stm32-timer-trigger"; + reg = <11>; + status = "disabled"; + }; + }; + + timers13: timers@40001c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001C00 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM13)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + + timers14: timers@40002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40002000 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM14)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + + rtc: rtc@40002800 { + compatible = "st,stm32-rtc"; + reg = <0x40002800 0x400>; + clocks = <&rcc 1 CLK_RTC>; + clock-names = "ck_rtc"; + assigned-clocks = <&rcc 1 CLK_RTC>; + assigned-clock-parents = <&rcc 1 CLK_LSE>; + interrupt-parent = <&exti>; + interrupts = <17 1>; + interrupt-names = "alarm"; + st,syscfg = <&pwrcfg>; status = "disabled"; }; @@ -112,7 +311,7 @@ compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40004400 0x400>; interrupts = <38>; - clocks = <&rcc 0 145>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART2)>; status = "disabled"; }; @@ -120,15 +319,18 @@ compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40004800 0x400>; interrupts = <39>; - clocks = <&rcc 0 146>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART3)>; status = "disabled"; + dmas = <&dma1 1 4 0x400 0x0>, + <&dma1 3 4 0x400 0x0>; + dma-names = "rx", "tx"; }; usart4: serial@40004c00 { compatible = "st,stm32-uart"; reg = <0x40004c00 0x400>; interrupts = <52>; - clocks = <&rcc 0 147>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART4)>; status = "disabled"; }; @@ -136,7 +338,19 @@ compatible = "st,stm32-uart"; reg = <0x40005000 0x400>; interrupts = <53>; - clocks = <&rcc 0 148>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART5)>; + status = "disabled"; + }; + + i2c1: i2c@40005400 { + compatible = "st,stm32f4-i2c"; + reg = <0x40005400 0x400>; + interrupts = <31>, + <32>; + resets = <&rcc STM32F4_APB1_RESET(I2C1)>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(I2C1)>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -144,7 +358,7 @@ compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40007800 0x400>; interrupts = <82>; - clocks = <&rcc 0 158>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART7)>; status = "disabled"; }; @@ -152,26 +366,114 @@ compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40007c00 0x400>; interrupts = <83>; - clocks = <&rcc 0 159>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART8)>; status = "disabled"; }; + timers1: timers@40010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40010000 0x400>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM1)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@0 { + compatible = "st,stm32-timer-trigger"; + reg = <0>; + status = "disabled"; + }; + }; + + timers8: timers@40010400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40010400 0x400>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM8)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@7 { + compatible = "st,stm32-timer-trigger"; + reg = <7>; + status = "disabled"; + }; + }; + usart1: serial@40011000 { compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40011000 0x400>; interrupts = <37>; - clocks = <&rcc 0 164>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART1)>; status = "disabled"; + dmas = <&dma2 2 4 0x400 0x0>, + <&dma2 7 4 0x400 0x0>; + dma-names = "rx", "tx"; }; usart6: serial@40011400 { compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40011400 0x400>; interrupts = <71>; - clocks = <&rcc 0 165>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART6)>; status = "disabled"; }; + adc: adc@40012000 { + compatible = "st,stm32f4-adc-core"; + reg = <0x40012000 0x400>; + interrupts = <18>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>; + clock-names = "adc"; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + adc1: adc@0 { + compatible = "st,stm32f4-adc"; + #io-channel-cells = <1>; + reg = <0x0>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>; + interrupt-parent = <&adc>; + interrupts = <0>; + status = "disabled"; + }; + + adc2: adc@100 { + compatible = "st,stm32f4-adc"; + #io-channel-cells = <1>; + reg = <0x100>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC2)>; + interrupt-parent = <&adc>; + interrupts = <1>; + status = "disabled"; + }; + + adc3: adc@200 { + compatible = "st,stm32f4-adc"; + #io-channel-cells = <1>; + reg = <0x200>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC3)>; + interrupt-parent = <&adc>; + interrupts = <2>; + status = "disabled"; + }; + }; + syscfg: system-config@40013800 { compatible = "syscon"; reg = <0x40013800 0x400>; @@ -185,18 +487,76 @@ interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>; }; + timers9: timers@40014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40014000 0x400>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM9)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@8 { + compatible = "st,stm32-timer-trigger"; + reg = <8>; + status = "disabled"; + }; + }; + + timers10: timers@40014400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40014400 0x400>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM10)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + + timers11: timers@40014800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40014800 0x400>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM11)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + + pwrcfg: power-config@40007000 { + compatible = "syscon"; + reg = <0x40007000 0x400>; + }; + pin-controller { #address-cells = <1>; #size-cells = <1>; compatible = "st,stm32f429-pinctrl"; ranges = <0 0x40020000 0x3000>; + interrupt-parent = <&exti>; + st,syscfg = <&syscfg 0x8>; pins-are-numbered; gpioa: gpio@40020000 { gpio-controller; #gpio-cells = <2>; reg = <0x0 0x400>; - clocks = <&rcc 0 0>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>; st,bank-name = "GPIOA"; }; @@ -204,7 +564,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x400 0x400>; - clocks = <&rcc 0 1>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>; st,bank-name = "GPIOB"; }; @@ -212,7 +572,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x800 0x400>; - clocks = <&rcc 0 2>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>; st,bank-name = "GPIOC"; }; @@ -220,7 +580,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0xc00 0x400>; - clocks = <&rcc 0 3>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>; st,bank-name = "GPIOD"; }; @@ -228,7 +588,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1000 0x400>; - clocks = <&rcc 0 4>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>; st,bank-name = "GPIOE"; }; @@ -236,7 +596,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1400 0x400>; - clocks = <&rcc 0 5>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>; st,bank-name = "GPIOF"; }; @@ -244,7 +604,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1800 0x400>; - clocks = <&rcc 0 6>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>; st,bank-name = "GPIOG"; }; @@ -252,7 +612,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1c00 0x400>; - clocks = <&rcc 0 7>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>; st,bank-name = "GPIOH"; }; @@ -260,7 +620,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x2000 0x400>; - clocks = <&rcc 0 8>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>; st,bank-name = "GPIOI"; }; @@ -268,7 +628,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x2400 0x400>; - clocks = <&rcc 0 9>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>; st,bank-name = "GPIOJ"; }; @@ -276,7 +636,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x2800 0x400>; - clocks = <&rcc 0 10>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>; st,bank-name = "GPIOK"; }; @@ -293,6 +653,19 @@ }; }; + usart3_pins_a: usart3@0 { + pins1 { + pinmux = <STM32F429_PB10_FUNC_USART3_TX>; + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32F429_PB11_FUNC_USART3_RX>; + bias-disable; + }; + }; + usbotg_hs_pins_a: usbotg_hs@0 { pins { pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>, @@ -313,7 +686,7 @@ }; }; - ethernet0_mii: mii@0 { + ethernet_mii: mii@0 { pins { pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>, <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>, @@ -332,6 +705,37 @@ slew-rate = <2>; }; }; + + adc3_in8_pin: adc@200 { + pins { + pinmux = <STM32F429_PF10_FUNC_ANALOG>; + }; + }; + + pwm1_pins: pwm@1 { + pins { + pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>, + <STM32F429_PB13_FUNC_TIM1_CH1N>, + <STM32F429_PB12_FUNC_TIM1_BKIN>; + }; + }; + + pwm3_pins: pwm@3 { + pins { + pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>, + <STM32F429_PB5_FUNC_TIM3_CH2>; + }; + }; + + i2c1_pins: i2c1@0 { + pins { + pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>, + <STM32F429_PB6_FUNC_I2C1_SCL>; + bias-disable; + drive-open-drain; + slew-rate = <3>; + }; + }; }; rcc: rcc@40023810 { @@ -339,7 +743,10 @@ #clock-cells = <2>; compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; reg = <0x40023800 0x400>; - clocks = <&clk_hse>; + clocks = <&clk_hse>, <&clk_i2s_ckin>; + st,syscfg = <&pwrcfg>; + assigned-clocks = <&rcc 1 CLK_HSE_RTC>; + assigned-clock-rates = <1000000>; }; dma1: dma-controller@40026000 { @@ -353,7 +760,7 @@ <16>, <17>, <47>; - clocks = <&rcc 0 21>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA1)>; #dma-cells = <4>; }; @@ -368,32 +775,32 @@ <68>, <69>, <70>; - clocks = <&rcc 0 22>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA2)>; #dma-cells = <4>; st,mem2mem; }; - ethernet0: dwmac@40028000 { + mac: ethernet@40028000 { compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; reg = <0x40028000 0x8000>; reg-names = "stmmaceth"; - interrupts = <61>, <62>; - interrupt-names = "macirq", "eth_wake_irq"; - clock-names = "stmmaceth", "tx-clk", "rx-clk"; - clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>; + interrupts = <61>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(ETHMAC)>, + <&rcc 0 STM32F4_AHB1_CLOCK(ETHMACTX)>, + <&rcc 0 STM32F4_AHB1_CLOCK(ETHMACRX)>; st,syscon = <&syscfg 0x4>; snps,pbl = <8>; snps,mixed-burst; - dma-ranges; status = "disabled"; }; usbotg_hs: usb@40040000 { compatible = "snps,dwc2"; - dma-ranges; reg = <0x40040000 0x40000>; interrupts = <77>; - clocks = <&rcc 0 29>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHS)>; clock-names = "otg"; status = "disabled"; }; @@ -402,12 +809,13 @@ compatible = "st,stm32-rng"; reg = <0x50060800 0x400>; interrupts = <80>; - clocks = <&rcc 0 38>; + clocks = <&rcc 0 STM32F4_AHB2_CLOCK(RNG)>; + }; }; }; &systick { - clocks = <&rcc 1 0>; + clocks = <&rcc 1 SYSTICK>; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts index e911af836471..0dd56ef574fa 100644 --- a/arch/arm/boot/dts/stm32f469-disco.dts +++ b/arch/arm/boot/dts/stm32f469-disco.dts @@ -58,18 +58,60 @@ }; memory { - reg = <0x00000000 0x800000>; + reg = <0x00000000 0x1000000>; }; aliases { serial0 = &usart3; }; + + soc { + dma-ranges = <0xc0000000 0x0 0x10000000>; + }; +}; + +&rcc { + compatible = "st,stm32f469-rcc", "st,stm32f42xx-rcc", "st,stm32-rcc"; }; &clk_hse { clock-frequency = <8000000>; }; +&rtc { + status = "okay"; +}; + +&timers1 { + status = "okay"; + + pwm { + pinctrl-0 = <&pwm1_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + timer@0 { + status = "okay"; + }; +}; + +&timers3 { + status = "okay"; + + pwm { + pinctrl-0 = <&pwm3_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + timer@2 { + status = "okay"; + }; +}; + &usart3 { + pinctrl-0 = <&usart3_pins_a>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi new file mode 100644 index 000000000000..f321ffe87144 --- /dev/null +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -0,0 +1,304 @@ +/* + * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "skeleton.dtsi" +#include "armv7-m.dtsi" +#include <dt-bindings/pinctrl/stm32f746-pinfunc.h> + +/ { + clocks { + clk_hse: clk-hse { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + }; + + soc { + timer2: timer@40000000 { + compatible = "st,stm32-timer"; + reg = <0x40000000 0x400>; + interrupts = <28>; + clocks = <&rcc 0 128>; + status = "disabled"; + }; + + timer3: timer@40000400 { + compatible = "st,stm32-timer"; + reg = <0x40000400 0x400>; + interrupts = <29>; + clocks = <&rcc 0 129>; + status = "disabled"; + }; + + timer4: timer@40000800 { + compatible = "st,stm32-timer"; + reg = <0x40000800 0x400>; + interrupts = <30>; + clocks = <&rcc 0 130>; + status = "disabled"; + }; + + timer5: timer@40000c00 { + compatible = "st,stm32-timer"; + reg = <0x40000c00 0x400>; + interrupts = <50>; + clocks = <&rcc 0 131>; + }; + + timer6: timer@40001000 { + compatible = "st,stm32-timer"; + reg = <0x40001000 0x400>; + interrupts = <54>; + clocks = <&rcc 0 132>; + status = "disabled"; + }; + + timer7: timer@40001400 { + compatible = "st,stm32-timer"; + reg = <0x40001400 0x400>; + interrupts = <55>; + clocks = <&rcc 0 133>; + status = "disabled"; + }; + + usart2: serial@40004400 { + compatible = "st,stm32f7-usart", "st,stm32f7-uart"; + reg = <0x40004400 0x400>; + interrupts = <38>; + clocks = <&rcc 0 145>; + status = "disabled"; + }; + + usart3: serial@40004800 { + compatible = "st,stm32f7-usart", "st,stm32f7-uart"; + reg = <0x40004800 0x400>; + interrupts = <39>; + clocks = <&rcc 0 146>; + status = "disabled"; + }; + + usart4: serial@40004c00 { + compatible = "st,stm32f7-uart"; + reg = <0x40004c00 0x400>; + interrupts = <52>; + clocks = <&rcc 0 147>; + status = "disabled"; + }; + + usart5: serial@40005000 { + compatible = "st,stm32f7-uart"; + reg = <0x40005000 0x400>; + interrupts = <53>; + clocks = <&rcc 0 148>; + status = "disabled"; + }; + + usart7: serial@40007800 { + compatible = "st,stm32f7-usart", "st,stm32f7-uart"; + reg = <0x40007800 0x400>; + interrupts = <82>; + clocks = <&rcc 0 158>; + status = "disabled"; + }; + + usart8: serial@40007c00 { + compatible = "st,stm32f7-usart", "st,stm32f7-uart"; + reg = <0x40007c00 0x400>; + interrupts = <83>; + clocks = <&rcc 0 159>; + status = "disabled"; + }; + + usart1: serial@40011000 { + compatible = "st,stm32f7-usart", "st,stm32f7-uart"; + reg = <0x40011000 0x400>; + interrupts = <37>; + clocks = <&rcc 0 164>; + status = "disabled"; + }; + + usart6: serial@40011400 { + compatible = "st,stm32f7-usart", "st,stm32f7-uart"; + reg = <0x40011400 0x400>; + interrupts = <71>; + clocks = <&rcc 0 165>; + status = "disabled"; + }; + + syscfg: system-config@40013800 { + compatible = "syscon"; + reg = <0x40013800 0x400>; + }; + + exti: interrupt-controller@40013c00 { + compatible = "st,stm32-exti"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x40013C00 0x400>; + interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>; + }; + + pin-controller { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32f746-pinctrl"; + ranges = <0 0x40020000 0x3000>; + interrupt-parent = <&exti>; + st,syscfg = <&syscfg 0x8>; + pins-are-numbered; + + gpioa: gpio@40020000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x0 0x400>; + clocks = <&rcc 0 256>; + st,bank-name = "GPIOA"; + }; + + gpiob: gpio@40020400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x400 0x400>; + clocks = <&rcc 0 257>; + st,bank-name = "GPIOB"; + }; + + gpioc: gpio@40020800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x800 0x400>; + clocks = <&rcc 0 258>; + st,bank-name = "GPIOC"; + }; + + gpiod: gpio@40020c00 { + gpio-controller; + #gpio-cells = <2>; + reg = <0xc00 0x400>; + clocks = <&rcc 0 259>; + st,bank-name = "GPIOD"; + }; + + gpioe: gpio@40021000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&rcc 0 260>; + st,bank-name = "GPIOE"; + }; + + gpiof: gpio@40021400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1400 0x400>; + clocks = <&rcc 0 261>; + st,bank-name = "GPIOF"; + }; + + gpiog: gpio@40021800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1800 0x400>; + clocks = <&rcc 0 262>; + st,bank-name = "GPIOG"; + }; + + gpioh: gpio@40021c00 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1c00 0x400>; + clocks = <&rcc 0 263>; + st,bank-name = "GPIOH"; + }; + + gpioi: gpio@40022000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&rcc 0 264>; + st,bank-name = "GPIOI"; + }; + + gpioj: gpio@40022400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2400 0x400>; + clocks = <&rcc 0 265>; + st,bank-name = "GPIOJ"; + }; + + gpiok: gpio@40022800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2800 0x400>; + clocks = <&rcc 0 266>; + st,bank-name = "GPIOK"; + }; + + usart1_pins_a: usart1@0 { + pins1 { + pinmux = <STM32F746_PA9_FUNC_USART1_TX>; + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32F746_PA10_FUNC_USART1_RX>; + bias-disable; + }; + }; + }; + + rcc: rcc@40023800 { + #clock-cells = <2>; + compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; + reg = <0x40023800 0x400>; + clocks = <&clk_hse>; + }; + }; +}; + +&systick { + clocks = <&rcc 1 0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index 39e368ec3428..f3fc27412a67 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -117,6 +117,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &ehci0 { status = "okay"; }; @@ -186,20 +190,43 @@ &pio { emac_power_pin_a1000: emac_power_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH15"; + function = "gpio_out"; }; led_pins_a1000: led_pins@0 { - allwinner,pins = "PH10", "PH20"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH10", "PH20"; + function = "gpio_out"; }; }; +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + ®_usb1_vbus { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts index 5f98582232d6..942d739a4384 100644 --- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts +++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts @@ -127,7 +127,7 @@ &pio { usb2_vbus_pin_a: usb2_vbus_pin@0 { - allwinner,pins = "PH12"; + pins = "PH12"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts index 023b03efa5ff..17f8c5ec011c 100644 --- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -142,17 +142,15 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 710e2ef516a8..04e040e6233d 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -165,17 +165,15 @@ &pio { led_pins_cubieboard: led_pins@0 { - allwinner,pins = "PH20", "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH20", "PH21"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts index 893497e397da..8317fbfeec4a 100644 --- a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts +++ b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts @@ -178,45 +178,35 @@ &pio { bl_en_pin_dsrv9703c: bl_en_pin@0 { - allwinner,pins = "PH7"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH7"; + function = "gpio_out"; }; codec_pa_pin: codec_pa_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH15"; + function = "gpio_out"; }; motor_pins: motor_pins@0 { - allwinner,pins = "PB3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB3"; + function = "gpio_out"; }; touchscreen_pins: touchscreen_pins@0 { - allwinner,pins = "PB13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB13"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts index ac64781a0a9c..9616cdecce93 100644 --- a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts +++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts @@ -156,10 +156,8 @@ &pio { codec_pa_pin: codec_pa_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH15"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index 6de83a6187d0..a48b46474417 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -129,17 +129,13 @@ pinctrl-0 = <&hackberry_hogs>; hackberry_hogs: hogs@0 { - allwinner,pins = "PH19"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH19"; + function = "gpio_out"; }; usb2_vbus_pin_hackberry: usb2_vbus_pin@0 { - allwinner,pins = "PH12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH12"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts index 9103864fef90..85dcf81ab64e 100644 --- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts +++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts @@ -93,17 +93,15 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; @@ -123,7 +121,7 @@ }; &usb2_vbus_pin_a { - allwinner,pins = "PH6"; + pins = "PH6"; }; &usb_otg { diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts index e09053bf5e1f..f3092703a1a6 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet1.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts @@ -180,31 +180,25 @@ &pio { bl_en_pin_inet: bl_en_pin@0 { - allwinner,pins = "PH7"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH7"; + function = "gpio_out"; }; touchscreen_wake_pin: touchscreen_wake_pin@0 { - allwinner,pins = "PB13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB13"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 04b0d2d1ae6c..a1a2bbb3f9d3 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -161,17 +161,15 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts index bba4f9cf9bf5..4ef2a60a8cd4 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts @@ -320,28 +320,25 @@ &pio { key_pins_inet9f: key_pins@0 { - allwinner,pins = "PA0", "PA1", "PA3", "PA4", - "PA5", "PA6", "PA8", "PA9", - "PA11", "PA12", "PA13", - "PA14", "PA15", "PA16", "PA17", - "PH22", "PH23", "PH24", "PH25", "PH26"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA0", "PA1", "PA3", "PA4", + "PA5", "PA6", "PA8", "PA9", + "PA11", "PA12", "PA13", + "PA14", "PA15", "PA16", "PA17", + "PH22", "PH23", "PH24", "PH25", "PH26"; + function = "gpio_in"; + bias-pull-up; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts index e28f080b1fd5..fc4d4d49e2e2 100644 --- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts +++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts @@ -163,17 +163,13 @@ &pio { emac_power_pin_q5: emac_power_pin@0 { - allwinner,pins = "PH19"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH19"; + function = "gpio_out"; }; led_pins_q5: led_pins@0 { - allwinner,pins = "PH20"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH20"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts index 8e50723dbe02..a2885039d5f1 100644 --- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts @@ -164,17 +164,14 @@ &pio { led_pins_marsboard: led_pins@0 { - allwinner,pins = "PB5", "PB6", "PB7", "PB8"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB5", "PB6", "PB7", "PB8"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index a7dd86d30fa2..af42ebb3a97b 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -93,7 +93,7 @@ &ir0_rx_pins_a { /* The ir receiver is not always populated */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &mmc0 { diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts index ee46ea854832..9c1afd4277d7 100644 --- a/arch/arm/boot/dts/sun4i-a10-mk802.dts +++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts @@ -91,24 +91,18 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH4"; + function = "gpio_in"; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH5"; + function = "gpio_in"; }; usb2_vbus_pin_mk802: usb2_vbus_pin@0 { - allwinner,pins = "PH12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH12"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index b350448c7217..214a5accfe93 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -168,31 +168,26 @@ &pio { ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - allwinner,pins = "PC3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC3"; + function = "gpio_out"; }; led_pins_olinuxinolime: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 39034aa8e1ae..b0365d63ba70 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -170,24 +170,19 @@ &pio { led_pins_pcduino: led_pins@0 { - allwinner,pins = "PH15", "PH16"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH15", "PH16"; + function = "gpio_out"; }; key_pins_pcduino: key_pins@0 { - allwinner,pins = "PH17", "PH18", "PH19"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH17", "PH18", "PH19"; + function = "gpio_in"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts b/arch/arm/boot/dts/sun4i-a10-pcduino2.dts index de483a1bf36a..811d00ee2ade 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino2.dts @@ -57,10 +57,8 @@ &pio { usb2_vbus_pin_pcduino2: usb2_vbus_pin@0 { - allwinner,pins = "PD2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PD2"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts index 918f97294b33..bfa6bbdaab27 100644 --- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts +++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts @@ -164,38 +164,30 @@ &pio { bl_en_pin_protab: bl_en_pin@0 { - allwinner,pins = "PH7"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH7"; + function = "gpio_out"; }; codec_pa_pin: codec_pa_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH15"; + function = "gpio_out"; }; touchscreen_pins: touchscreen_pins@0 { - allwinner,pins = "PA5", "PB13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA5", "PB13"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 7e7dfc2b43db..ba20b48c0702 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -967,197 +967,150 @@ compatible = "allwinner,sun4i-a10-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <28>; - clocks = <&apb0_gates 5>; + clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; #gpio-cells = <3>; emac_pins_a: emac0@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "emac"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + function = "emac"; }; i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB0", "PB1"; + function = "i2c0"; }; i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB18", "PB19"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB18", "PB19"; + function = "i2c1"; }; i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB20", "PB21"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB20", "PB21"; + function = "i2c2"; }; ir0_rx_pins_a: ir0@0 { - allwinner,pins = "PB4"; - allwinner,function = "ir0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB4"; + function = "ir0"; }; ir0_tx_pins_a: ir0@1 { - allwinner,pins = "PB3"; - allwinner,function = "ir0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB3"; + function = "ir0"; }; ir1_rx_pins_a: ir1@0 { - allwinner,pins = "PB23"; - allwinner,function = "ir1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB23"; + function = "ir1"; }; ir1_tx_pins_a: ir1@1 { - allwinner,pins = "PB22"; - allwinner,function = "ir1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB22"; + function = "ir1"; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", - "PF3", "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { - allwinner,pins = "PH1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH1"; + function = "gpio_in"; + bias-pull-up; }; ps20_pins_a: ps20@0 { - allwinner,pins = "PI20", "PI21"; - allwinner,function = "ps2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI20", "PI21"; + function = "ps2"; }; ps21_pins_a: ps21@0 { - allwinner,pins = "PH12", "PH13"; - allwinner,function = "ps2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH12", "PH13"; + function = "ps2"; }; pwm0_pins_a: pwm0@0 { - allwinner,pins = "PB2"; - allwinner,function = "pwm"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "pwm"; }; pwm1_pins_a: pwm1@0 { - allwinner,pins = "PI3"; - allwinner,function = "pwm"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI3"; + function = "pwm"; }; spdif_tx_pins_a: spdif@0 { - allwinner,pins = "PB13"; - allwinner,function = "spdif"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PB13"; + function = "spdif"; + bias-pull-up; }; spi0_pins_a: spi0@0 { - allwinner,pins = "PI11", "PI12", "PI13"; - allwinner,function = "spi0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI11", "PI12", "PI13"; + function = "spi0"; }; spi0_cs0_pins_a: spi0_cs0@0 { - allwinner,pins = "PI10"; - allwinner,function = "spi0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI10"; + function = "spi0"; }; spi1_pins_a: spi1@0 { - allwinner,pins = "PI17", "PI18", "PI19"; - allwinner,function = "spi1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI17", "PI18", "PI19"; + function = "spi1"; }; spi1_cs0_pins_a: spi1_cs0@0 { - allwinner,pins = "PI16"; - allwinner,function = "spi1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI16"; + function = "spi1"; }; spi2_pins_a: spi2@0 { - allwinner,pins = "PC20", "PC21", "PC22"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC20", "PC21", "PC22"; + function = "spi2"; }; spi2_pins_b: spi2@1 { - allwinner,pins = "PB15", "PB16", "PB17"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB15", "PB16", "PB17"; + function = "spi2"; }; spi2_cs0_pins_a: spi2_cs0@0 { - allwinner,pins = "PC19"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC19"; + function = "spi2"; }; spi2_cs0_pins_b: spi2_cs0@1 { - allwinner,pins = "PB14"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB14"; + function = "spi2"; }; uart0_pins_a: uart0@0 { - allwinner,pins = "PB22", "PB23"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB22", "PB23"; + function = "uart0"; }; uart0_pins_b: uart0@1 { - allwinner,pins = "PF2", "PF4"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF2", "PF4"; + function = "uart0"; }; uart1_pins_a: uart1@0 { - allwinner,pins = "PA10", "PA11"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA10", "PA11"; + function = "uart1"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts index d4ad02182353..a539b72ce093 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts @@ -109,17 +109,15 @@ &pio { mmc0_cd_pin_t003: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-up; }; led_pins_t003: led_pins@0 { - allwinner,pins = "PB2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "gpio_out"; + drive-strength = <20>; }; }; @@ -140,11 +138,11 @@ }; &usb0_vbus_pin_a { - allwinner,pins = "PG13"; + pins = "PG13"; }; &usb1_vbus_pin_a { - allwinner,pins = "PB10"; + pins = "PB10"; }; &usb_otg { diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts index 2150e15e115a..e1b5e8a446fe 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts @@ -130,31 +130,26 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG12"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG12"; + function = "gpio_in"; + bias-pull-up; }; mmc0_cd_pin_t004: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-up; }; mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 { - allwinner,pins = "PB18"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB18"; + function = "gpio_out"; }; led_pins_t004: led_pins@0 { - allwinner,pins = "PB2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "gpio_out"; + drive-strength = <20>; }; }; @@ -175,7 +170,7 @@ }; &usb1_vbus_pin_a { - allwinner,pins = "PG13"; + pins = "PG13"; }; &usbphy { diff --git a/arch/arm/boot/dts/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/sun5i-a10s-mk802.dts index c84ac005342e..020aa9d6c31d 100644 --- a/arch/arm/boot/dts/sun5i-a10s-mk802.dts +++ b/arch/arm/boot/dts/sun5i-a10s-mk802.dts @@ -116,24 +116,19 @@ &pio { led_pins_mk802: led_pins@0 { - allwinner,pins = "PB2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "gpio_out"; }; mmc0_cd_pin_mk802: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_mk802: usb1_vbus_pin@0 { - allwinner,pins = "PB10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB10"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index aef91476f9ae..d8245c6314a7 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -202,38 +202,32 @@ &pio { mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-up; }; mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 { - allwinner,pins = "PG13"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG13"; + function = "gpio_in"; + bias-pull-up; }; led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PE3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PE3"; + function = "gpio_out"; + drive-strength = <20>; }; usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 { - allwinner,pins = "PB10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB10"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG12"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG12"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -250,8 +244,8 @@ &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>, - <&spi2_cs0_pins_a>; + pinctrl-0 = <&spi2_pins_b>, + <&spi2_cs0_pins_b>; status = "okay"; }; @@ -279,7 +273,7 @@ }; &usb0_vbus_pin_a { - allwinner,pins = "PG11"; + pins = "PG11"; }; &usbphy { diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts index 3b057983c74a..51371f9b1cf0 100644 --- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts +++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts @@ -101,24 +101,20 @@ &pio { mmc0_cd_pin_r7: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-up; }; led_pins_r7: led_pins@0 { - allwinner,pins = "PB2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "gpio_out"; + drive-strength = <20>; }; usb1_vbus_pin_r7: usb1_vbus_pin@0 { - allwinner,pins = "PG13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG13"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts index b5de75f4c710..2b8adda0deda 100644 --- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts +++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts @@ -146,24 +146,19 @@ &pio { led_pins_wobo_i5: led_pins@0 { - allwinner,pins = "PB2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "gpio_out"; }; mmc0_cd_pin_wobo_i5: mmc0_cd_pin@0 { - allwinner,pins = "PB3"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PB3"; + function = "gpio_in"; + bias-pull-up; }; emac_power_pin_wobo: emac_power_pin@0 { - allwinner,pins = "PA02"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA02"; + function = "gpio_out"; }; }; @@ -223,7 +218,7 @@ }; &usb1_vbus_pin_a { - allwinner,pins = "PG12"; + pins = "PG12"; }; &usbphy { diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index c41a2ba34dde..24b0f5f556f8 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -65,8 +65,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, - <&ahb_gates 43>, <&ahb_gates 44>; + clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_HDMI>, + <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DRAM_DE_BE>, + <&ccu CLK_DE_BE>, <&ccu CLK_HDMI>; status = "disabled"; }; @@ -74,8 +75,8 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; - clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, - <&ahb_gates 44>; + clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_TCON_CH0>, <&ccu CLK_DRAM_DE_BE>; status = "disabled"; }; @@ -83,77 +84,19 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; - clocks = <&pll3>, <&pll5 1>, <&ahb_gates 34>, - <&ahb_gates 36>, <&ahb_gates 44>; + clocks = <&ccu CLK_AHB_TVE>, <&ccu CLK_AHB_LCD>, + <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_TCON_CH1>, <&ccu CLK_DRAM_DE_BE>; status = "disabled"; }; }; - clocks { - ahb_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a10s-ahb-gates-clk"; - reg = <0x01c20060 0x8>; - clocks = <&ahb>; - clock-indices = <0>, <1>, - <2>, <5>, <6>, - <7>, <8>, <9>, - <10>, <13>, - <14>, <17>, <18>, - <20>, <21>, <22>, - <26>, <28>, <32>, - <34>, <36>, <40>, - <43>, <44>, - <46>, <51>, - <52>; - clock-output-names = "ahb_usbotg", "ahb_ehci", - "ahb_ohci", "ahb_ss", "ahb_dma", - "ahb_bist", "ahb_mmc0", "ahb_mmc1", - "ahb_mmc2", "ahb_nand", - "ahb_sdram", "ahb_emac", "ahb_ts", - "ahb_spi0", "ahb_spi1", "ahb_spi2", - "ahb_gps", "ahb_stimer", "ahb_ve", - "ahb_tve", "ahb_lcd", "ahb_csi", - "ahb_hdmi", "ahb_de_be", - "ahb_de_fe", "ahb_iep", - "ahb_mali400"; - }; - - apb0_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a10s-apb0-gates-clk"; - reg = <0x01c20068 0x4>; - clocks = <&apb0>; - clock-indices = <0>, <3>, - <5>, <6>, - <10>; - clock-output-names = "apb0_codec", "apb0_iis", - "apb0_pio", "apb0_ir", - "apb0_keypad"; - }; - - apb1_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a10s-apb1-gates-clk"; - reg = <0x01c2006c 0x4>; - clocks = <&apb1>; - clock-indices = <0>, <1>, - <2>, <16>, - <17>, <18>, - <19>; - clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_uart0", - "apb1_uart1", "apb1_uart2", - "apb1_uart3"; - }; - }; - soc@01c00000 { emac: ethernet@01c0b000 { compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; interrupts = <55>; - clocks = <&ahb_gates 17>; + clocks = <&ccu CLK_AHB_EMAC>; allwinner,sram = <&emac_sram 1>; status = "disabled"; }; @@ -169,7 +112,7 @@ pwm: pwm@01c20e00 { compatible = "allwinner,sun5i-a10s-pwm"; reg = <0x01c20e00 0xc>; - clocks = <&osc24M>; + clocks = <&ccu CLK_HOSC>; #pwm-cells = <3>; status = "disabled"; }; @@ -180,7 +123,7 @@ interrupts = <1>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 16>; + clocks = <&ccu CLK_APB1_UART0>; status = "disabled"; }; @@ -190,71 +133,62 @@ interrupts = <3>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 18>; + clocks = <&ccu CLK_APB1_UART2>; status = "disabled"; }; }; }; +&ccu { + compatible = "allwinner,sun5i-a10s-ccu"; +}; + &pio { compatible = "allwinner,sun5i-a10s-pinctrl"; uart0_pins_a: uart0@0 { - allwinner,pins = "PB19", "PB20"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB19", "PB20"; + function = "uart0"; }; uart2_pins_a: uart2@0 { - allwinner,pins = "PC18", "PC19"; - allwinner,function = "uart2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC18", "PC19"; + function = "uart2"; }; emac_pins_a: emac0@0 { - allwinner,pins = "PA0", "PA1", "PA2", + pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PA16"; - allwinner,function = "emac"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "emac"; }; emac_pins_b: emac0@1 { - allwinner,pins = "PD6", "PD7", "PD10", + pins = "PD6", "PD7", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", "PD24", "PD25", "PD26", "PD27"; - allwinner,function = "emac"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "emac"; }; mmc1_pins_a: mmc1@0 { - allwinner,pins = "PG3", "PG4", "PG5", + pins = "PG3", "PG4", "PG5", "PG6", "PG7", "PG8"; - allwinner,function = "mmc1"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "mmc1"; + drive-strength = <30>; }; - spi2_pins_a: spi2@0 { - allwinner,pins = "PB12", "PB13", "PB14"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + spi2_pins_b: spi2@1 { + pins = "PB12", "PB13", "PB14"; + function = "spi2"; }; - spi2_cs0_pins_a: spi2_cs0@0 { - allwinner,pins = "PB11"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + spi2_cs0_pins_b: spi2_cs0@1 { + pins = "PB11"; + function = "spi2"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts index 6efbba6d40a9..42435454acef 100644 --- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts +++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts @@ -137,24 +137,21 @@ &pio { mmc0_cd_pin_d709: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG0"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-down; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG2"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -212,7 +209,7 @@ }; &usb0_vbus_pin_a { - allwinner,pins = "PG12"; + pins = "PG12"; }; &usbphy { diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts index 3724b988064e..5879a75cf97a 100644 --- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -136,24 +136,20 @@ &pio { mmc0_cd_pin_h702: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG0"; + function = "gpio_in"; + bias-pull-up; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG2"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG1"; + function = "gpio_in"; }; }; @@ -208,7 +204,7 @@ }; &usb0_vbus_pin_a { - allwinner,pins = "PG12"; + pins = "PG12"; }; &usbphy { diff --git a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts new file mode 100644 index 000000000000..566cda91a66b --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts @@ -0,0 +1,224 @@ +/* + * Copyright 2016 Icenowy Zheng <icenowy@aosc.xyz> + * + * Based on sun5i-a13-olinuxino.dts, which is + * Copyright 2012 Maxime Ripard <maxime.ripard@free-electrons.com> + * Copyright 2013 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a13.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Lichee Pi One"; + compatible = "licheepi,licheepi-one", "allwinner,sun5i-a13"; + + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + red { + label ="licheepi:red:usr"; + gpios = <&pio 2 5 GPIO_ACTIVE_LOW>; + }; + + green { + label ="licheepi:green:usr"; + gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + blue { + label ="licheepi:blue:usr"; + gpios = <&pio 2 4 GPIO_ACTIVE_LOW>; + }; + + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "disabled"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "disabled"; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@984 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <984126>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + broken-cd; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + broken-cd; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "csi-1.8v"; +}; + +®_ldo4 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "csi-2.8v"; +}; + +®_usb0_vbus { + gpio = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */ + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index 081329e2b80b..60e393e28783 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -115,45 +115,37 @@ &pio { mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG0"; + function = "gpio_in"; + bias-pull-up; }; led_pins_olinuxinom: led_pins@0 { - allwinner,pins = "PG9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG9"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG2"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-down; }; usb0_vbus_pin_olinuxinom: usb0_vbus_pin@0 { - allwinner,pins = "PG12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG12"; + function = "gpio_out"; }; usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 { - allwinner,pins = "PG11"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG11"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index b3c234c65ea1..940d47e88056 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -72,6 +72,47 @@ default-state = "on"; }; }; + + bridge { + compatible = "dumb-vga-dac"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vga_bridge_in: endpoint { + remote-endpoint = <&tcon0_out_vga>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_bridge_out>; + }; + }; + }; +}; + +&be0 { + status = "okay"; }; &ehci0 { @@ -165,38 +206,32 @@ &pio { mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG0"; + function = "gpio_in"; + bias-pull-up; }; led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PG9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG9"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG2"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-down; }; usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 { - allwinner,pins = "PG11"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG11"; + function = "gpio_out"; }; }; @@ -211,6 +246,19 @@ status = "okay"; }; +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rgb666_pins>; + status = "okay"; +}; + +&tcon0_out { + tcon0_out_vga: endpoint@0 { + reg = <0>; + remote-endpoint = <&vga_bridge_in>; + }; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins_b>; @@ -223,7 +271,7 @@ }; &usb0_vbus_pin_a { - allwinner,pins = "PG12"; + pins = "PG12"; }; &usbphy { diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts index a8b0bcc04514..bfdd38d6bfcc 100644 --- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts +++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts @@ -80,23 +80,7 @@ }; &codec_pa_pin { - allwinner,pins = "PG3"; -}; - -&i2c1 { - icn8318: touchscreen@40 { - compatible = "chipone,icn8318"; - reg = <0x40>; - interrupt-parent = <&pio>; - interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */ - pinctrl-names = "default"; - pinctrl-0 = <&ts_wake_pin_p66>; - wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ - touchscreen-size-x = <800>; - touchscreen-size-y = <480>; - touchscreen-inverted-x; - touchscreen-swapped-x-y; - }; + pins = "PG3"; }; &mmc2 { @@ -116,30 +100,35 @@ &pio { i2c_lcd_pins: i2c_lcd_pin@0 { - allwinner,pins = "PG10", "PG12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - ts_wake_pin_p66: ts_wake_pin@0 { - allwinner,pins = "PB3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG10", "PG12"; + function = "gpio_out"; + bias-pull-up; }; - }; ®_usb0_vbus { gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ }; +&touchscreen { + compatible = "chipone,icn8318"; + reg = <0x40>; + /* The P66 uses a different EINT then the reference design */ + interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */ + /* The icn8318 binding expects wake-gpios instead of power-gpios */ + wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + status = "okay"; +}; + &uart1 { /* The P66 uses the uart pins as gpios */ status = "disabled"; }; &usb0_vbus_pin_a { - allwinner,pins = "PB4"; + pins = "PB4"; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index a17ba0243db3..fb2ddb9a04c9 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -61,8 +61,8 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; - clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&de_be_clk>, - <&tcon_ch0_clk>, <&dram_gates 26>; + clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_TCON_CH0>, <&ccu CLK_DRAM_DE_BE>; status = "disabled"; }; }; @@ -99,114 +99,6 @@ }; }; - clocks { - ahb_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-ahb-gates-clk"; - reg = <0x01c20060 0x8>; - clocks = <&ahb>; - clock-indices = <0>, <1>, - <2>, <5>, <6>, - <7>, <8>, <9>, - <10>, <13>, - <14>, <20>, - <21>, <22>, - <28>, <32>, <34>, - <36>, <40>, <44>, - <46>, <51>, - <52>; - clock-output-names = "ahb_usbotg", "ahb_ehci", - "ahb_ohci", "ahb_ss", "ahb_dma", - "ahb_bist", "ahb_mmc0", "ahb_mmc1", - "ahb_mmc2", "ahb_nand", - "ahb_sdram", "ahb_spi0", - "ahb_spi1", "ahb_spi2", - "ahb_stimer", "ahb_ve", "ahb_tve", - "ahb_lcd", "ahb_csi", "ahb_de_be", - "ahb_de_fe", "ahb_iep", - "ahb_mali400"; - }; - - apb0_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-apb0-gates-clk"; - reg = <0x01c20068 0x4>; - clocks = <&apb0>; - clock-indices = <0>, <5>, - <6>; - clock-output-names = "apb0_codec", "apb0_pio", - "apb0_ir"; - }; - - apb1_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-apb1-gates-clk"; - reg = <0x01c2006c 0x4>; - clocks = <&apb1>; - clock-indices = <0>, <1>, - <2>, <17>, - <19>; - clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_uart1", - "apb1_uart3"; - }; - - dram_gates: clk@01c20100 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-dram-gates-clk", - "allwinner,sun4i-a10-gates-clk"; - reg = <0x01c20100 0x4>; - clocks = <&pll5 0>; - clock-indices = <0>, - <1>, - <25>, - <26>, - <29>, - <31>; - clock-output-names = "dram_ve", - "dram_csi", - "dram_de_fe", - "dram_de_be", - "dram_ace", - "dram_iep"; - }; - - de_be_clk: clk@01c20104 { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c20104 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-be"; - }; - - de_fe_clk: clk@01c2010c { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c2010c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-fe"; - }; - - tcon_ch0_clk: clk@01c20118 { - #clock-cells = <0>; - #reset-cells = <1>; - compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; - reg = <0x01c20118 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon-ch0-sclk"; - }; - - tcon_ch1_clk: clk@01c2012c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; - reg = <0x01c2012c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon-ch1-sclk"; - }; - }; - display-engine { compatible = "allwinner,sun5i-a13-display-engine"; allwinner,pipelines = <&fe0>; @@ -217,11 +109,11 @@ compatible = "allwinner,sun5i-a13-tcon"; reg = <0x01c0c000 0x1000>; interrupts = <44>; - resets = <&tcon_ch0_clk 1>; + resets = <&ccu RST_LCD>; reset-names = "lcd"; - clocks = <&ahb_gates 36>, - <&tcon_ch0_clk>, - <&tcon_ch1_clk>; + clocks = <&ccu CLK_AHB_LCD>, + <&ccu CLK_TCON_CH0>, + <&ccu CLK_TCON_CH1>; clock-names = "ahb", "tcon-ch0", "tcon-ch1"; @@ -254,7 +146,7 @@ pwm: pwm@01c20e00 { compatible = "allwinner,sun5i-a13-pwm"; reg = <0x01c20e00 0xc>; - clocks = <&osc24M>; + clocks = <&ccu CLK_HOSC>; #pwm-cells = <3>; status = "disabled"; }; @@ -263,11 +155,11 @@ compatible = "allwinner,sun5i-a13-display-frontend"; reg = <0x01e00000 0x20000>; interrupts = <47>; - clocks = <&ahb_gates 46>, <&de_fe_clk>, - <&dram_gates 25>; + clocks = <&ccu CLK_DE_FE>, <&ccu CLK_DE_FE>, + <&ccu CLK_DRAM_DE_FE>; clock-names = "ahb", "mod", "ram"; - resets = <&de_fe_clk>; + resets = <&ccu RST_DE_FE>; status = "disabled"; ports { @@ -290,14 +182,14 @@ be0: display-backend@01e60000 { compatible = "allwinner,sun5i-a13-display-backend"; reg = <0x01e60000 0x10000>; - clocks = <&ahb_gates 44>, <&de_be_clk>, - <&dram_gates 26>; + clocks = <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_DRAM_DE_BE>; clock-names = "ahb", "mod", "ram"; - resets = <&de_be_clk>; + resets = <&ccu RST_DE_BE>; status = "disabled"; - assigned-clocks = <&de_be_clk>; + assigned-clocks = <&ccu CLK_DE_BE>; assigned-clock-rates = <300000000>; ports { @@ -330,6 +222,10 @@ }; }; +&ccu { + compatible = "allwinner,sun5i-a13-ccu"; +}; + &cpu0 { clock-latency = <244144>; /* 8 32k periods */ operating-points = < @@ -350,26 +246,20 @@ compatible = "allwinner,sun5i-a13-pinctrl"; lcd_rgb666_pins: lcd_rgb666@0 { - allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", - "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", - "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", - "PD24", "PD25", "PD26", "PD27"; - allwinner,function = "lcd0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", + "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + function = "lcd0"; }; uart1_pins_a: uart1@0 { - allwinner,pins = "PE10", "PE11"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PE10", "PE11"; + function = "uart1"; }; uart1_pins_b: uart1@1 { - allwinner,pins = "PG3", "PG4"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG3", "PG4"; + function = "uart1"; }; }; diff --git a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts new file mode 100644 index 000000000000..0cf0813d363a --- /dev/null +++ b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts @@ -0,0 +1,262 @@ +/* + * Copyright 2016 Free Electrons + * Copyright 2016 NextThing Co + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-gr8.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "NextThing C.H.I.P. Pro"; + compatible = "nextthing,chip-pro", "nextthing,gr8"; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + status { + label = "chip-pro:white:status"; + gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + mmc0_pwrseq: mmc0_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on_pin_chip_pro>; + reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */ + }; +}; + +&codec { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + + /* + * The interrupt is routed through the "External Fast + * Interrupt Request" pin (ball G13 of the module) + * directly to the main interrupt controller, without + * any other controller interfering. + */ + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "disabled"; +}; + +&i2s0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>; + status = "disabled"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>; + vmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&mmc0_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&nfc { + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; + status = "okay"; + + nand@0 { + #address-cells = <2>; + #size-cells = <2>; + reg = <0>; + allwinner,rb = <0>; + nand-ecc-mode = "hw"; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_pin_chip_pro: usb0-id-pin@0 { + pins = "PG2"; + function = "gpio_in"; + }; + + wifi_reg_on_pin_chip_pro: wifi-reg-on-pin@0 { + pins = "PB10"; + function = "gpio_out"; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins>; + status = "disabled"; +}; + +®_dcdc2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; + regulator-always-on; +}; + +®_dcdc3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-sys"; + regulator-always-on; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; + regulator-always-on; +}; + +/* + * Both LDO3 and LDO4 are used in parallel to power up the + * WiFi/BT chip. + */ +®_ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-1"; + regulator-always-on; +}; + +®_ldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-2"; + regulator-always-on; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_a>, <&uart1_cts_rts_pins_a>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins_a>, <&uart2_cts_rts_pins_a>; + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_a>, <&uart3_cts_rts_pins_a>; + status = "okay"; +}; + +&usb_otg { + /* + * The CHIP Pro doesn't have a controllable VBUS, nor does it + * have any 5v rail on the board itself. + * + * If one wants to use it as a true OTG port, it should be + * done in the baseboard, and its DT / overlay will add it. + */ + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_pin_chip_pro>; + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb1_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/sun5i-gr8-evb.dts index 714381fd64d7..1a845af4d4db 100644 --- a/arch/arm/boot/dts/sun5i-gr8-evb.dts +++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts @@ -75,6 +75,39 @@ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; }; + + sound-analog { + compatible = "simple-audio-card"; + simple-audio-card,name = "gr8-evb-wm8978"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <512>; + + simple-audio-card,cpu { + sound-dai = <&i2s0>; + }; + + simple-audio-card,codec { + sound-dai = <&wm8978>; + }; + }; + + sound-spdif { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; }; &be0 { @@ -226,31 +259,23 @@ &pio { mmc0_cd_pin_gr8_evb: mmc0-cd-pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG0"; + function = "gpio_in"; }; usb0_id_pin_gr8_evb: usb0-id-pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG2"; + function = "gpio_in"; }; usb0_vbus_det_pin_gr8_evb: usb0-vbus-det-pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG1"; + function = "gpio_in"; }; usb1_vbus_pin_gr8_evb: usb1-vbus-pin@0 { - allwinner,pins = "PG13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG13"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun5i-gr8.dtsi b/arch/arm/boot/dts/sun5i-gr8.dtsi index ca54e03ef366..cb9b2aaf7297 100644 --- a/arch/arm/boot/dts/sun5i-gr8.dtsi +++ b/arch/arm/boot/dts/sun5i-gr8.dtsi @@ -42,9 +42,10 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include <dt-bindings/clock/sun4i-a10-pll2.h> +#include <dt-bindings/clock/sun5i-ccu.h> #include <dt-bindings/dma/sun4i-a10.h> #include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/reset/sun5i-ccu.h> / { interrupt-parent = <&intc>; @@ -59,7 +60,7 @@ device_type = "cpu"; compatible = "arm,cortex-a8"; reg = <0x0>; - clocks = <&cpu>; + clocks = <&ccu CLK_CPU>; }; }; @@ -68,419 +69,19 @@ #size-cells = <1>; ranges; - /* - * This is a dummy clock, to be used as placeholder on - * other mux clocks when a specific parent clock is not - * yet implemented. It should be dropped when the driver - * is complete. - */ - dummy: dummy { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - osc24M: clk@01c20050 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-osc-clk"; - reg = <0x01c20050 0x4>; + compatible = "fixed-clock"; clock-frequency = <24000000>; clock-output-names = "osc24M"; }; - osc3M: osc3M-clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - clocks = <&osc24M>; - clock-output-names = "osc3M"; - }; - osc32k: clk@0 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; clock-output-names = "osc32k"; }; - - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - pll2: clk@01c20008 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-pll2-clk"; - reg = <0x01c20008 0x8>; - clocks = <&osc24M>; - clock-output-names = "pll2-1x", "pll2-2x", - "pll2-4x", "pll2-8x"; - }; - - pll3: clk@01c20010 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20010 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll3"; - }; - - pll3x2: pll3x2-clk { - compatible = "allwinner,sun4i-a10-pll3-2x-clk"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <2>; - clocks = <&pll3>; - clock-output-names = "pll3-2x"; - }; - - pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20018 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll4"; - }; - - pll5: clk@01c20020 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll5-clk"; - reg = <0x01c20020 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll5_ddr", "pll5_other"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6_sata", "pll6_other", "pll6"; - }; - - pll7: clk@01c20030 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20030 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll7"; - }; - - pll7x2: pll7x2-clk { - compatible = "allwinner,sun4i-a10-pll3-2x-clk"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <2>; - clocks = <&pll7>; - clock-output-names = "pll7-2x"; - }; - - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; - clock-output-names = "cpu"; - }; - - axi: axi@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-axi-clk"; - reg = <0x01c20054 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - ahb: ahb@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-ahb-clk"; - reg = <0x01c20054 0x4>; - clocks = <&axi>, <&cpu>, <&pll6 1>; - clock-output-names = "ahb"; - /* - * Use PLL6 as parent, instead of CPU/AXI - * which has rate changes due to cpufreq - */ - assigned-clocks = <&ahb>; - assigned-clock-parents = <&pll6 1>; - }; - - apb0: apb0@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb>; - clock-output-names = "apb0"; - }; - - apb1: clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1"; - }; - - axi_gates: clk@01c2005c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-gates-clk"; - reg = <0x01c2005c 0x4>; - clocks = <&axi>; - clock-indices = <0>; - clock-output-names = "axi_dram"; - }; - - ahb_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-ahb-gates-clk"; - reg = <0x01c20060 0x8>; - clocks = <&ahb>; - clock-indices = <0>, <1>, - <2>, <5>, <6>, - <7>, <8>, <9>, - <10>, <13>, - <14>, <17>, <20>, - <21>, <22>, - <28>, <32>, <34>, - <36>, <40>, <44>, - <46>, <51>, - <52>; - clock-output-names = "ahb_usbotg", "ahb_ehci", - "ahb_ohci", "ahb_ss", "ahb_dma", - "ahb_bist", "ahb_mmc0", "ahb_mmc1", - "ahb_mmc2", "ahb_nand", - "ahb_sdram", "ahb_emac", "ahb_spi0", - "ahb_spi1", "ahb_spi2", - "ahb_hstimer", "ahb_ve", "ahb_tve", - "ahb_lcd", "ahb_csi", "ahb_de_be", - "ahb_de_fe", "ahb_iep", - "ahb_mali400"; - }; - - apb0_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-gates-clk"; - reg = <0x01c20068 0x4>; - clocks = <&apb0>; - clock-indices = <0>, <3>, - <5>, <6>; - clock-output-names = "apb0_codec", "apb0_i2s0", - "apb0_pio", "apb0_ir"; - }; - - apb1_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-gates-clk"; - reg = <0x01c2006c 0x4>; - clocks = <&apb1>; - clock-indices = <0>, <1>, - <2>, <17>, - <18>, <19>; - clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_uart1", - "apb1_uart2", "apb1_uart3"; - }; - - nand_clk: clk@01c20080 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20080 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "nand"; - }; - - ms_clk: clk@01c20084 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20084 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ms"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - - ts_clk: clk@01c20098 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20098 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ts"; - }; - - ss_clk: clk@01c2009c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c2009c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ss"; - }; - - spi0_clk: clk@01c200a0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi0"; - }; - - spi1_clk: clk@01c200a4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi1"; - }; - - spi2_clk: clk@01c200a8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a8 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi2"; - }; - - ir0_clk: clk@01c200b0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200b0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir0"; - }; - - i2s0_clk: clk@01c200b8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200b8 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "i2s0"; - }; - - spdif_clk: clk@01c200c0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200c0 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "spdif"; - }; - - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun5i-a13-usb-clk"; - reg = <0x01c200cc 0x4>; - clocks = <&pll6 1>; - clock-output-names = "usb_ohci0", "usb_phy"; - }; - - dram_gates: clk@01c20100 { - #clock-cells = <1>; - compatible = "nextthing,gr8-dram-gates-clk", - "allwinner,sun4i-a10-gates-clk"; - reg = <0x01c20100 0x4>; - clocks = <&pll5 0>; - clock-indices = <0>, - <1>, - <25>, - <26>, - <29>, - <31>; - clock-output-names = "dram_ve", - "dram_csi", - "dram_de_fe", - "dram_de_be", - "dram_ace", - "dram_iep"; - }; - - de_be_clk: clk@01c20104 { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c20104 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-be"; - }; - - de_fe_clk: clk@01c2010c { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c2010c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-fe"; - }; - - tcon_ch0_clk: clk@01c20118 { - #clock-cells = <0>; - #reset-cells = <1>; - compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; - reg = <0x01c20118 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon-ch0-sclk"; - }; - - tcon_ch1_clk: clk@01c2012c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; - reg = <0x01c2012c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon-ch1-sclk"; - }; - - codec_clk: clk@01c20140 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-codec-clk"; - reg = <0x01c20140 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "codec"; - }; - - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-mbus-clk"; - reg = <0x01c2015c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mbus"; - }; }; display-engine { @@ -528,7 +129,7 @@ compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; interrupts = <27>; - clocks = <&ahb_gates 6>; + clocks = <&ccu CLK_AHB_DMA>; #dma-cells = <2>; }; @@ -536,7 +137,7 @@ compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = <37>; - clocks = <&ahb_gates 13>, <&nand_clk>; + clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 3>; dma-names = "rxtx"; @@ -549,7 +150,7 @@ compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <10>; - clocks = <&ahb_gates 20>, <&spi0_clk>; + clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 27>, <&dma SUN4I_DMA_DEDICATED 26>; @@ -563,7 +164,7 @@ compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c06000 0x1000>; interrupts = <11>; - clocks = <&ahb_gates 21>, <&spi1_clk>; + clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 9>, <&dma SUN4I_DMA_DEDICATED 8>; @@ -576,8 +177,8 @@ tve0: tv-encoder@01c0a000 { compatible = "allwinner,sun4i-a10-tv-encoder"; reg = <0x01c0a000 0x1000>; - clocks = <&ahb_gates 34>; - resets = <&tcon_ch0_clk 0>; + clocks = <&ccu CLK_AHB_TVE>; + resets = <&ccu RST_TVE>; status = "disabled"; port { @@ -595,11 +196,11 @@ compatible = "allwinner,sun5i-a13-tcon"; reg = <0x01c0c000 0x1000>; interrupts = <44>; - resets = <&tcon_ch0_clk 1>; + resets = <&ccu RST_LCD>; reset-names = "lcd"; - clocks = <&ahb_gates 36>, - <&tcon_ch0_clk>, - <&tcon_ch1_clk>; + clocks = <&ccu CLK_AHB_LCD>, + <&ccu CLK_TCON_CH0>, + <&ccu CLK_TCON_CH1>; clock-names = "ahb", "tcon-ch0", "tcon-ch1"; @@ -637,14 +238,8 @@ mmc0: mmc@01c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>; + clock-names = "ahb", "mmc"; interrupts = <32>; status = "disabled"; #address-cells = <1>; @@ -654,14 +249,8 @@ mmc1: mmc@01c10000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&ahb_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>; + clock-names = "ahb", "mmc"; interrupts = <33>; status = "disabled"; #address-cells = <1>; @@ -671,14 +260,8 @@ mmc2: mmc@01c11000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&ahb_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>; + clock-names = "ahb", "mmc"; interrupts = <34>; status = "disabled"; #address-cells = <1>; @@ -688,7 +271,7 @@ usb_otg: usb@01c13000 { compatible = "allwinner,sun4i-a10-musb"; reg = <0x01c13000 0x0400>; - clocks = <&ahb_gates 0>; + clocks = <&ccu CLK_AHB_OTG>; interrupts = <38>; interrupt-names = "mc"; phys = <&usbphy 0>; @@ -705,9 +288,9 @@ compatible = "allwinner,sun5i-a13-usb-phy"; reg = <0x01c13400 0x10 0x01c14800 0x4>; reg-names = "phy_ctrl", "pmu1"; - clocks = <&usb_clk 8>; + clocks = <&ccu CLK_USB_PHY0>; clock-names = "usb_phy"; - resets = <&usb_clk 0>, <&usb_clk 1>; + resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>; reset-names = "usb0_reset", "usb1_reset"; status = "disabled"; }; @@ -716,7 +299,7 @@ compatible = "allwinner,sun5i-a13-ehci", "generic-ehci"; reg = <0x01c14000 0x100>; interrupts = <39>; - clocks = <&ahb_gates 1>; + clocks = <&ccu CLK_AHB_EHCI>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; @@ -726,7 +309,7 @@ compatible = "allwinner,sun5i-a13-ohci", "generic-ohci"; reg = <0x01c14400 0x100>; interrupts = <40>; - clocks = <&usb_clk 6>, <&ahb_gates 2>; + clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; @@ -736,7 +319,7 @@ compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c17000 0x1000>; interrupts = <12>; - clocks = <&ahb_gates 22>, <&spi2_clk>; + clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 29>, <&dma SUN4I_DMA_DEDICATED 28>; @@ -746,6 +329,15 @@ #size-cells = <0>; }; + ccu: clock@01c20000 { + compatible = "nextthing,gr8-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + intc: interrupt-controller@01c20400 { compatible = "allwinner,sun4i-a10-ic"; reg = <0x01c20400 0x400>; @@ -757,129 +349,126 @@ compatible = "nextthing,gr8-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <28>; - clocks = <&apb0_gates 5>; + clocks = <&ccu CLK_APB0_PIO>; gpio-controller; interrupt-controller; #interrupt-cells = <3>; #gpio-cells = <3>; i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB0", "PB1"; + function = "i2c0"; }; i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB15", "PB16"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB15", "PB16"; + function = "i2c1"; }; i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB17", "PB18"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB17", "PB18"; + function = "i2c2"; }; i2s0_data_pins_a: i2s0-data@0 { - allwinner,pins = "PB6", "PB7", "PB8", "PB9"; - allwinner,function = "i2s0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB6", "PB7", "PB8", "PB9"; + function = "i2s0"; }; i2s0_mclk_pins_a: i2s0-mclk@0 { - allwinner,pins = "PB6", "PB7", "PB8", "PB9"; - allwinner,function = "i2s0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB5"; + function = "i2s0"; }; ir0_rx_pins_a: ir0@0 { - allwinner,pins = "PB4"; - allwinner,function = "ir0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB4"; + function = "ir0"; }; lcd_rgb666_pins: lcd-rgb666@0 { - allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", + pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", "PD24", "PD25", "PD26", "PD27"; - allwinner,function = "lcd0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "lcd0"; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", "PF3", + pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "mmc0"; + drive-strength = <30>; }; nand_pins_a: nand-base0@0 { - allwinner,pins = "PC0", "PC1", "PC2", + pins = "PC0", "PC1", "PC2", "PC5", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15"; - allwinner,function = "nand0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "nand0"; }; nand_cs0_pins_a: nand-cs@0 { - allwinner,pins = "PC4"; - allwinner,function = "nand0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC4"; + function = "nand0"; }; nand_rb0_pins_a: nand-rb@0 { - allwinner,pins = "PC6"; - allwinner,function = "nand0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC6"; + function = "nand0"; }; pwm0_pins_a: pwm0@0 { - allwinner,pins = "PB2"; - allwinner,function = "pwm0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "pwm0"; + }; + + pwm1_pins: pwm1 { + pins = "PG13"; + function = "pwm1"; }; spdif_tx_pins_a: spdif@0 { - allwinner,pins = "PB10"; - allwinner,function = "spdif"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PB10"; + function = "spdif"; + bias-pull-up; }; uart1_pins_a: uart1@1 { - allwinner,pins = "PG3", "PG4"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG3", "PG4"; + function = "uart1"; }; uart1_cts_rts_pins_a: uart1-cts-rts@0 { - allwinner,pins = "PG5", "PG6"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG5", "PG6"; + function = "uart1"; + }; + + uart2_pins_a: uart2@1 { + pins = "PD2", "PD3"; + function = "uart2"; + }; + + uart2_cts_rts_pins_a: uart2-cts-rts@0 { + pins = "PD4", "PD5"; + function = "uart2"; + }; + + uart3_pins_a: uart3@1 { + pins = "PG9", "PG10"; + function = "uart3"; + }; + + uart3_cts_rts_pins_a: uart3-cts-rts@0 { + pins = "PG11", "PG12"; + function = "uart3"; }; }; pwm: pwm@01c20e00 { compatible = "allwinner,sun5i-a10s-pwm"; reg = <0x01c20e00 0xc>; - clocks = <&osc24M>; + clocks = <&ccu CLK_HOSC>; #pwm-cells = <3>; status = "disabled"; }; @@ -888,7 +477,7 @@ compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0x90>; interrupts = <22>; - clocks = <&osc24M>; + clocks = <&ccu CLK_HOSC>; }; wdt: watchdog@01c20c90 { @@ -901,7 +490,7 @@ compatible = "allwinner,sun4i-a10-spdif"; reg = <0x01c21000 0x400>; interrupts = <13>; - clocks = <&apb0_gates 1>, <&spdif_clk>; + clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>; clock-names = "apb", "spdif"; dmas = <&dma SUN4I_DMA_NORMAL 2>, <&dma SUN4I_DMA_NORMAL 2>; @@ -911,7 +500,7 @@ ir0: ir@01c21800 { compatible = "allwinner,sun4i-a10-ir"; - clocks = <&apb0_gates 6>, <&ir0_clk>; + clocks = <&ccu CLK_APB0_IR>, <&ccu CLK_IR>; clock-names = "apb", "ir"; interrupts = <5>; reg = <0x01c21800 0x40>; @@ -923,7 +512,7 @@ compatible = "allwinner,sun4i-a10-i2s"; reg = <0x01c22400 0x400>; interrupts = <16>; - clocks = <&apb0_gates 3>, <&i2s0_clk>; + clocks = <&ccu CLK_APB0_I2S>, <&ccu CLK_I2S>; clock-names = "apb", "mod"; dmas = <&dma SUN4I_DMA_NORMAL 3>, <&dma SUN4I_DMA_NORMAL 3>; @@ -943,7 +532,7 @@ compatible = "allwinner,sun4i-a10-codec"; reg = <0x01c22c00 0x40>; interrupts = <30>; - clocks = <&apb0_gates 0>, <&codec_clk>; + clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>; clock-names = "apb", "codec"; dmas = <&dma SUN4I_DMA_NORMAL 19>, <&dma SUN4I_DMA_NORMAL 19>; @@ -964,7 +553,7 @@ interrupts = <2>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 17>; + clocks = <&ccu CLK_APB1_UART1>; status = "disabled"; }; @@ -974,7 +563,17 @@ interrupts = <3>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 18>; + clocks = <&ccu CLK_APB1_UART2>; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_APB1_UART3>; status = "disabled"; }; @@ -982,7 +581,7 @@ compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <7>; - clocks = <&apb1_gates 0>; + clocks = <&ccu CLK_APB1_I2C0>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -992,7 +591,7 @@ compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = <8>; - clocks = <&apb1_gates 1>; + clocks = <&ccu CLK_APB1_I2C1>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -1002,7 +601,7 @@ compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = <9>; - clocks = <&apb1_gates 2>; + clocks = <&ccu CLK_APB1_I2C2>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -1012,18 +611,18 @@ compatible = "allwinner,sun5i-a13-hstimer"; reg = <0x01c60000 0x1000>; interrupts = <82>, <83>; - clocks = <&ahb_gates 28>; + clocks = <&ccu CLK_AHB_HSTIMER>; }; fe0: display-frontend@01e00000 { compatible = "allwinner,sun5i-a13-display-frontend"; reg = <0x01e00000 0x20000>; interrupts = <47>; - clocks = <&ahb_gates 46>, <&de_fe_clk>, - <&dram_gates 25>; + clocks = <&ccu CLK_AHB_DE_FE>, <&ccu CLK_DE_FE>, + <&ccu CLK_DRAM_DE_FE>; clock-names = "ahb", "mod", "ram"; - resets = <&de_fe_clk>; + resets = <&ccu RST_DE_FE>; status = "disabled"; ports { @@ -1046,14 +645,14 @@ be0: display-backend@01e60000 { compatible = "allwinner,sun5i-a13-display-backend"; reg = <0x01e60000 0x10000>; - clocks = <&ahb_gates 44>, <&de_be_clk>, - <&dram_gates 26>; + clocks = <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_DRAM_DE_BE>; clock-names = "ahb", "mod", "ram"; - resets = <&de_be_clk>; + resets = <&ccu RST_DE_BE>; status = "disabled"; - assigned-clocks = <&de_be_clk>; + assigned-clocks = <&ccu CLK_DE_BE>; assigned-clock-rates = <300000000>; ports { diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts index b68a12374b35..e86fa46fdd45 100644 --- a/arch/arm/boot/dts/sun5i-r8-chip.dts +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts @@ -56,9 +56,11 @@ aliases { i2c0 = &i2c0; + i2c1 = &i2c1; i2c2 = &i2c2; serial0 = &uart1; serial1 = &uart3; + spi0 = &spi2; }; chosen { @@ -74,6 +76,20 @@ default-state = "on"; }; }; + + mmc0_pwrseq: mmc0_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&chip_wifi_reg_on_pin>; + reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */ + }; + + onewire { + compatible = "w1-gpio"; + gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */ + pinctrl-names = "default"; + pinctrl-0 = <&chip_w1_pin>; + }; }; &be0 { @@ -112,6 +128,12 @@ #include "axp209.dtsi" +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "disabled"; +}; + &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; @@ -131,10 +153,15 @@ }; }; +&mmc0_pins_a { + bias-pull-up; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&mmc0_pwrseq>; bus-width = <4>; non-removable; status = "okay"; @@ -150,17 +177,24 @@ &pio { chip_vbus_pin: chip_vbus_pin@0 { - allwinner,pins = "PB10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB10"; + function = "gpio_out"; + }; + + chip_wifi_reg_on_pin: chip_wifi_reg_on_pin@0 { + pins = "PC19"; + function = "gpio_out"; }; chip_id_det_pin: chip_id_det_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG2"; + function = "gpio_in"; + }; + + chip_w1_pin: chip_w1_pin@0 { + pins = "PD2"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -189,6 +223,28 @@ regulator-always-on; }; +/* + * Both LDO3 and LDO4 are used in parallel to power up the WiFi/BT + * Chip. + * + * If those are not enabled, the SDIO part will not enumerate, and + * since there's no way currently to pass DT infos to an SDIO device, + * we cannot really do better than this ugly hack for now. + */ +®_ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-1"; + regulator-always-on; +}; + +®_ldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-2"; + regulator-always-on; +}; + ®_ldo5 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -202,6 +258,12 @@ status = "okay"; }; +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "disabled"; +}; + &tcon0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-r8.dtsi b/arch/arm/boot/dts/sun5i-r8.dtsi index 8b058f53b7dc..4c1141396c99 100644 --- a/arch/arm/boot/dts/sun5i-r8.dtsi +++ b/arch/arm/boot/dts/sun5i-r8.dtsi @@ -51,9 +51,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; - clocks = <&ahb_gates 34>, <&ahb_gates 36>, - <&ahb_gates 44>, <&de_be_clk>, - <&tcon_ch1_clk>, <&dram_gates 26>; + clocks = <&ccu CLK_AHB_TVE>, <&ccu CLK_AHB_LCD>, + <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_TCON_CH1>, <&ccu CLK_DRAM_DE_BE>; status = "disabled"; }; }; @@ -62,8 +62,8 @@ tve0: tv-encoder@01c0a000 { compatible = "allwinner,sun4i-a10-tv-encoder"; reg = <0x01c0a000 0x1000>; - clocks = <&ahb_gates 34>; - resets = <&tcon_ch0_clk 0>; + clocks = <&ccu CLK_AHB_TVE>; + resets = <&ccu RST_TVE>; status = "disabled"; port { diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi index 20cc940f5f91..8a4d2277826f 100644 --- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi @@ -41,6 +41,7 @@ */ #include "sunxi-reference-design-tablet.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pwm/pwm.h> / { @@ -84,6 +85,23 @@ }; &i2c1 { + /* + * The gsl1680 is rated at 400KHz and it will not work reliable at + * 100KHz, this has been confirmed on multiple different q8 tablets. + * All other devices on this bus are also rated for 400KHz. + */ + clock-frequency = <400000>; + + touchscreen: touchscreen { + interrupt-parent = <&pio>; + interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */ + pinctrl-names = "default"; + pinctrl-0 = <&ts_power_pin>; + power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + /* Tablet dts must provide reg and compatible */ + status = "disabled"; + }; + pcf8563: rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; @@ -112,38 +130,38 @@ &pio { codec_pa_pin: codec_pa_pin@0 { - allwinner,pins = "PG10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG10"; + function = "gpio_out"; }; mmc0_cd_pin: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG0"; + function = "gpio_in"; + bias-pull-up; + }; + + ts_power_pin: ts_power_pin { + pins = "PB3"; + function = "gpio_out"; + drive-strength = <10>; + bias-disable; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-down; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG2"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_pin_a: usb0_vbus_pin@0 { - allwinner,pins = "PG12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG12"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index e374f4fc8073..a9574a6cd95c 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -44,9 +44,10 @@ #include "skeleton.dtsi" -#include <dt-bindings/clock/sun4i-a10-pll2.h> +#include <dt-bindings/clock/sun5i-ccu.h> #include <dt-bindings/dma/sun4i-a10.h> #include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/reset/sun5i-ccu.h> / { interrupt-parent = <&intc>; @@ -59,7 +60,7 @@ device_type = "cpu"; compatible = "arm,cortex-a8"; reg = <0x0>; - clocks = <&cpu>; + clocks = <&ccu CLK_CPU>; }; }; @@ -68,291 +69,19 @@ #size-cells = <1>; ranges; - /* - * This is a dummy clock, to be used as placeholder on - * other mux clocks when a specific parent clock is not - * yet implemented. It should be dropped when the driver - * is complete. - */ - dummy: dummy { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - osc24M: clk@01c20050 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-osc-clk"; - reg = <0x01c20050 0x4>; + compatible = "fixed-clock"; clock-frequency = <24000000>; clock-output-names = "osc24M"; }; - osc3M: osc3M_clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - clocks = <&osc24M>; - clock-output-names = "osc3M"; - }; - osc32k: clk@0 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; clock-output-names = "osc32k"; }; - - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - pll2: clk@01c20008 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-pll2-clk"; - reg = <0x01c20008 0x8>; - clocks = <&osc24M>; - clock-output-names = "pll2-1x", "pll2-2x", - "pll2-4x", "pll2-8x"; - }; - - pll3: clk@01c20010 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20010 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll3"; - }; - - pll3x2: pll3x2_clk { - compatible = "allwinner,sun4i-a10-pll3-2x-clk", "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <2>; - clocks = <&pll3>; - clock-output-names = "pll3-2x"; - }; - - pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20018 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll4"; - }; - - pll5: clk@01c20020 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll5-clk"; - reg = <0x01c20020 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll5_ddr", "pll5_other"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6_sata", "pll6_other", "pll6"; - }; - - pll7: clk@01c20030 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20030 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll7"; - }; - - pll7x2: pll7x2_clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <2>; - clocks = <&pll7>; - clock-output-names = "pll7-2x"; - }; - - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; - clock-output-names = "cpu"; - }; - - axi: axi@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-axi-clk"; - reg = <0x01c20054 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - ahb: ahb@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-ahb-clk"; - reg = <0x01c20054 0x4>; - clocks = <&axi>, <&cpu>, <&pll6 1>; - clock-output-names = "ahb"; - /* - * Use PLL6 as parent, instead of CPU/AXI - * which has rate changes due to cpufreq - */ - assigned-clocks = <&ahb>; - assigned-clock-parents = <&pll6 1>; - }; - - apb0: apb0@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb>; - clock-output-names = "apb0"; - }; - - apb1: clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1"; - }; - - axi_gates: clk@01c2005c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-axi-gates-clk"; - reg = <0x01c2005c 0x4>; - clocks = <&axi>; - clock-indices = <0>; - clock-output-names = "axi_dram"; - }; - - nand_clk: clk@01c20080 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20080 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "nand"; - }; - - ms_clk: clk@01c20084 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20084 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ms"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - - ts_clk: clk@01c20098 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20098 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ts"; - }; - - ss_clk: clk@01c2009c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c2009c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ss"; - }; - - spi0_clk: clk@01c200a0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi0"; - }; - - spi1_clk: clk@01c200a4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi1"; - }; - - spi2_clk: clk@01c200a8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a8 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi2"; - }; - - ir0_clk: clk@01c200b0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200b0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir0"; - }; - - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun5i-a13-usb-clk"; - reg = <0x01c200cc 0x4>; - clocks = <&pll6 1>; - clock-output-names = "usb_ohci0", "usb_phy"; - }; - - codec_clk: clk@01c20140 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-codec-clk"; - reg = <0x01c20140 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "codec"; - }; - - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-mbus-clk"; - reg = <0x01c2015c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mbus"; - }; }; soc@01c00000 { @@ -395,7 +124,7 @@ compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; interrupts = <27>; - clocks = <&ahb_gates 6>; + clocks = <&ccu CLK_AHB_DMA>; #dma-cells = <2>; }; @@ -403,7 +132,7 @@ compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <10>; - clocks = <&ahb_gates 20>, <&spi0_clk>; + clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 27>, <&dma SUN4I_DMA_DEDICATED 26>; @@ -417,7 +146,7 @@ compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c06000 0x1000>; interrupts = <11>; - clocks = <&ahb_gates 21>, <&spi1_clk>; + clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 9>, <&dma SUN4I_DMA_DEDICATED 8>; @@ -430,14 +159,8 @@ mmc0: mmc@01c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>; + clock-names = "ahb", "mmc"; interrupts = <32>; status = "disabled"; #address-cells = <1>; @@ -447,14 +170,8 @@ mmc1: mmc@01c10000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&ahb_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>; + clock-names = "ahb", "mmc"; interrupts = <33>; status = "disabled"; #address-cells = <1>; @@ -464,14 +181,8 @@ mmc2: mmc@01c11000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&ahb_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; + clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>; + clock-names = "ahb", "mmc"; interrupts = <34>; status = "disabled"; #address-cells = <1>; @@ -481,7 +192,7 @@ usb_otg: usb@01c13000 { compatible = "allwinner,sun4i-a10-musb"; reg = <0x01c13000 0x0400>; - clocks = <&ahb_gates 0>; + clocks = <&ccu CLK_AHB_OTG>; interrupts = <38>; interrupt-names = "mc"; phys = <&usbphy 0>; @@ -496,9 +207,9 @@ compatible = "allwinner,sun5i-a13-usb-phy"; reg = <0x01c13400 0x10 0x01c14800 0x4>; reg-names = "phy_ctrl", "pmu1"; - clocks = <&usb_clk 8>; + clocks = <&ccu CLK_USB_PHY0>; clock-names = "usb_phy"; - resets = <&usb_clk 0>, <&usb_clk 1>; + resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>; reset-names = "usb0_reset", "usb1_reset"; status = "disabled"; }; @@ -507,7 +218,7 @@ compatible = "allwinner,sun5i-a13-ehci", "generic-ehci"; reg = <0x01c14000 0x100>; interrupts = <39>; - clocks = <&ahb_gates 1>; + clocks = <&ccu CLK_AHB_EHCI>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; @@ -517,7 +228,7 @@ compatible = "allwinner,sun5i-a13-ohci", "generic-ohci"; reg = <0x01c14400 0x100>; interrupts = <40>; - clocks = <&usb_clk 6>, <&ahb_gates 2>; + clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; @@ -527,7 +238,7 @@ compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c17000 0x1000>; interrupts = <12>; - clocks = <&ahb_gates 22>, <&spi2_clk>; + clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 29>, <&dma SUN4I_DMA_DEDICATED 28>; @@ -537,6 +248,14 @@ #size-cells = <0>; }; + ccu: clock@01c20000 { + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + intc: interrupt-controller@01c20400 { compatible = "allwinner,sun4i-a10-ic"; reg = <0x01c20400 0x400>; @@ -547,69 +266,84 @@ pio: pinctrl@01c20800 { reg = <0x01c20800 0x400>; interrupts = <28>; - clocks = <&apb0_gates 5>; + clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; #gpio-cells = <3>; i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB0", "PB1"; + function = "i2c0"; }; i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB15", "PB16"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB15", "PB16"; + function = "i2c1"; }; i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB17", "PB18"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB17", "PB18"; + function = "i2c2"; + }; + + lcd_rgb565_pins: lcd_rgb565@0 { + pins = "PD3", "PD4", "PD5", "PD6", "PD7", + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", + "PD19", "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + function = "lcd0"; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", "PF3", - "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; mmc2_pins_a: mmc2@0 { - allwinner,pins = "PC6", "PC7", "PC8", "PC9", - "PC10", "PC11", "PC12", "PC13", - "PC14", "PC15"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", "PC13", + "PC14", "PC15"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc2_4bit_pins_a: mmc2-4bit@0 { + pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + + spi2_pins_a: spi2@0 { + pins = "PE1", "PE2", "PE3"; + function = "spi2"; + }; + + spi2_cs0_pins_a: spi2-cs0@0 { + pins = "PE0"; + function = "spi2"; }; uart3_pins_a: uart3@0 { - allwinner,pins = "PG9", "PG10"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG9", "PG10"; + function = "uart3"; }; uart3_pins_cts_rts_a: uart3-cts-rts@0 { - allwinner,pins = "PG11", "PG12"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG11", "PG12"; + function = "uart3"; }; pwm0_pins: pwm0 { - allwinner,pins = "PB2"; - allwinner,function = "pwm"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "pwm"; }; }; @@ -617,7 +351,7 @@ compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0x90>; interrupts = <22>; - clocks = <&osc24M>; + clocks = <&ccu CLK_HOSC>; }; wdt: watchdog@01c20c90 { @@ -637,7 +371,7 @@ compatible = "allwinner,sun4i-a10-codec"; reg = <0x01c22c00 0x40>; interrupts = <30>; - clocks = <&apb0_gates 0>, <&codec_clk>; + clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>; clock-names = "apb", "codec"; dmas = <&dma SUN4I_DMA_NORMAL 19>, <&dma SUN4I_DMA_NORMAL 19>; @@ -663,7 +397,7 @@ interrupts = <2>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 17>; + clocks = <&ccu CLK_APB1_UART1>; status = "disabled"; }; @@ -673,7 +407,7 @@ interrupts = <4>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 19>; + clocks = <&ccu CLK_APB1_UART3>; status = "disabled"; }; @@ -681,7 +415,7 @@ compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <7>; - clocks = <&apb1_gates 0>; + clocks = <&ccu CLK_APB1_I2C0>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -691,7 +425,7 @@ compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = <8>; - clocks = <&apb1_gates 1>; + clocks = <&ccu CLK_APB1_I2C1>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -701,7 +435,7 @@ compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = <9>; - clocks = <&apb1_gates 2>; + clocks = <&ccu CLK_APB1_I2C2>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -711,7 +445,7 @@ compatible = "allwinner,sun5i-a13-hstimer"; reg = <0x01c60000 0x1000>; interrupts = <82>, <83>; - clocks = <&ahb_gates 28>; + clocks = <&ccu CLK_AHB_HSTIMER>; }; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts index 2f8cfab771e2..effbdc766938 100644 --- a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts +++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts @@ -68,10 +68,8 @@ &pio { usb1_vbus_pin_a: usb1_vbus_pin@0 { - allwinner,pins = "PH27"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH27"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index f9cf36888d93..f5ececd45bc0 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -124,29 +124,25 @@ }; &mmc0_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &pio { mmc0_cd_pin_colombus: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA8"; + function = "gpio_in"; + bias-pull-up; }; usb2_vbus_pin_colombus: usb2_vbus_pin@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH24"; + function = "gpio_out"; }; i2c_lcd_pins: i2c_lcd_pin@0 { - allwinner,pins = "PA23", "PA24"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA23", "PA24"; + function = "gpio_out"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 9a74637f677f..f094eeb6c499 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -63,16 +63,87 @@ stdout-path = "serial0:115200n8"; }; + vga-connector { + compatible = "vga-connector"; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_dac_out>; + }; + }; + }; + + vga-dac { + compatible = "dumb-vga-dac"; + vdd-supply = <®_vga_3v3>; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + vga_dac_in: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_vga>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + vga_dac_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + reg_vga_3v3: vga_3v3_regulator { + compatible = "regulator-fixed"; + regulator-name = "vga-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */ + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */ }; }; +&codec { + allwinner,audio-routing = + "Headphone", "HP", + "Speaker", "LINEOUT", + "LINEIN", "Line In", + "MIC1", "Mic", + "MIC2", "Headset Mic", + "Mic", "MBIAS", + "Headset Mic", "HBIAS"; + allwinner,pa-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc3>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -134,7 +205,7 @@ &mmc0_pins_a { /* external pull-ups missing for some pins */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &mmc1 { @@ -153,24 +224,19 @@ &pio { gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 { - allwinner,pins = "PA21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA21"; + function = "gpio_out"; }; mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA8"; + function = "gpio_in"; + bias-pull-up; }; wifi_reset_pin_hummingbird: wifi_reset_pin@0 { - allwinner,pins = "PG10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG10"; + function = "gpio_out"; }; }; @@ -182,6 +248,7 @@ reg = <0x68>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + x-powers,drive-vbus-en; }; }; @@ -240,23 +307,54 @@ regulator-name = "vcc-dram"; }; +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + ®_usb1_vbus { gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */ status = "okay"; }; +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd0_rgb888_pins>; + status = "okay"; +}; + +&tcon0_out { + tcon0_out_vga: endpoint@0 { + reg = <0>; + remote-endpoint = <&vga_dac_in>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usb1_vbus_pin_a { /* different pin from sunxi-common-regulators */ - allwinner,pins = "PH24"; + pins = "PH24"; }; &usbphy { + usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + usb0_vbus_det-gpio = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts index e9185dad67ee..2bc57d2dcd80 100644 --- a/arch/arm/boot/dts/sun6i-a31-i7.dts +++ b/arch/arm/boot/dts/sun6i-a31-i7.dts @@ -69,6 +69,29 @@ gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; }; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; +}; + +&codec { + allwinner,audio-routing = + "Headphone", "HP"; + status = "okay"; }; &ehci0 { @@ -109,24 +132,19 @@ &pio { led_pins_i7: led_pins@0 { - allwinner,pins = "PH13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH13"; + function = "gpio_out"; }; mmc0_cd_pin_i7: mmc0_cd_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH22"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_i7: usb1_vbus_pin@0 { - allwinner,pins = "PC27"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC27"; + function = "gpio_out"; }; }; @@ -137,6 +155,13 @@ status = "okay"; }; +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_pins_a>; + spdif-out = "okay"; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index 29016a13a2c1..8af5b667a46d 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -128,24 +128,19 @@ &pio { led_pins_m9: led_pins@0 { - allwinner,pins = "PH13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH13"; + function = "gpio_out"; }; mmc0_cd_pin_m9: mmc0_cd_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH22"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_m9: usb1_vbus_pin@0 { - allwinner,pins = "PC27"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC27"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts index 5faeae429e2a..bf0f5831126f 100644 --- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts +++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts @@ -128,24 +128,19 @@ &pio { led_pins_m9: led_pins@0 { - allwinner,pins = "PH13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH13"; + function = "gpio_out"; }; mmc0_cd_pin_m9: mmc0_cd_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH22"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_m9: usb1_vbus_pin@0 { - allwinner,pins = "PC27"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC27"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index ce1960453a0b..a4b96184cac1 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -231,6 +231,12 @@ }; }; + de: display-engine { + compatible = "allwinner,sun6i-a31-display-engine"; + allwinner,pipelines = <&fe0>; + status = "disabled"; + }; + soc@01c00000 { compatible = "simple-bus"; #address-cells = <1>; @@ -246,6 +252,44 @@ #dma-cells = <1>; }; + tcon0: lcd-controller@01c0c000 { + compatible = "allwinner,sun6i-a31-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_AHB1_LCD0>; + reset-names = "lcd"; + clocks = <&ccu CLK_AHB1_LCD0>, + <&ccu CLK_LCD0_CH0>, + <&ccu CLK_LCD0_CH1>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon0-pixel-clock"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_drc0: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + mmc0: mmc@01c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; @@ -428,124 +472,129 @@ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_APB1_PIO>; + clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; #gpio-cells = <3>; - uart0_pins_a: uart0@0 { - allwinner,pins = "PH20", "PH21"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + gmac_pins_gmii_a: gmac_gmii@0 { + pins = "PA0", "PA1", "PA2", "PA3", + "PA4", "PA5", "PA6", "PA7", + "PA8", "PA9", "PA10", "PA11", + "PA12", "PA13", "PA14", "PA15", + "PA16", "PA17", "PA18", "PA19", + "PA20", "PA21", "PA22", "PA23", + "PA24", "PA25", "PA26", "PA27"; + function = "gmac"; + /* + * data lines in GMII mode run at 125MHz and + * might need a higher signal drive strength + */ + drive-strength = <30>; + }; + + gmac_pins_mii_a: gmac_mii@0 { + pins = "PA0", "PA1", "PA2", "PA3", + "PA8", "PA9", "PA11", + "PA12", "PA13", "PA14", "PA19", + "PA20", "PA21", "PA22", "PA23", + "PA24", "PA26", "PA27"; + function = "gmac"; + }; + + gmac_pins_rgmii_a: gmac_rgmii@0 { + pins = "PA0", "PA1", "PA2", "PA3", + "PA9", "PA10", "PA11", + "PA12", "PA13", "PA14", "PA19", + "PA20", "PA25", "PA26", "PA27"; + function = "gmac"; + /* + * data lines in RGMII mode use DDR mode + * and need a higher signal drive strength + */ + drive-strength = <40>; }; i2c0_pins_a: i2c0@0 { - allwinner,pins = "PH14", "PH15"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH14", "PH15"; + function = "i2c0"; }; i2c1_pins_a: i2c1@0 { - allwinner,pins = "PH16", "PH17"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH16", "PH17"; + function = "i2c1"; }; i2c2_pins_a: i2c2@0 { - allwinner,pins = "PH18", "PH19"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH18", "PH19"; + function = "i2c2"; + }; + + lcd0_rgb888_pins: lcd0_rgb888 { + pins = "PD0", "PD1", "PD2", "PD3", + "PD4", "PD5", "PD6", "PD7", + "PD8", "PD9", "PD10", "PD11", + "PD12", "PD13", "PD14", "PD15", + "PD16", "PD17", "PD18", "PD19", + "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + function = "lcd0"; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", + pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; mmc1_pins_a: mmc1@0 { - allwinner,pins = "PG0", "PG1", "PG2", "PG3", + pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; - allwinner,function = "mmc1"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; }; mmc2_pins_a: mmc2@0 { - allwinner,pins = "PC6", "PC7", "PC8", "PC9", + pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; }; mmc2_8bit_emmc_pins: mmc2@1 { - allwinner,pins = "PC6", "PC7", "PC8", "PC9", + pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PC24"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; }; mmc3_8bit_emmc_pins: mmc3@1 { - allwinner,pins = "PC6", "PC7", "PC8", "PC9", + pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PC24"; - allwinner,function = "mmc3"; - allwinner,drive = <SUN4I_PINCTRL_40_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "mmc3"; + drive-strength = <40>; + bias-pull-up; }; - gmac_pins_mii_a: gmac_mii@0 { - allwinner,pins = "PA0", "PA1", "PA2", "PA3", - "PA8", "PA9", "PA11", - "PA12", "PA13", "PA14", "PA19", - "PA20", "PA21", "PA22", "PA23", - "PA24", "PA26", "PA27"; - allwinner,function = "gmac"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + spdif_pins_a: spdif@0 { + pins = "PH28"; + function = "spdif"; }; - gmac_pins_gmii_a: gmac_gmii@0 { - allwinner,pins = "PA0", "PA1", "PA2", "PA3", - "PA4", "PA5", "PA6", "PA7", - "PA8", "PA9", "PA10", "PA11", - "PA12", "PA13", "PA14", "PA15", - "PA16", "PA17", "PA18", "PA19", - "PA20", "PA21", "PA22", "PA23", - "PA24", "PA25", "PA26", "PA27"; - allwinner,function = "gmac"; - /* - * data lines in GMII mode run at 125MHz and - * might need a higher signal drive strength - */ - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - gmac_pins_rgmii_a: gmac_rgmii@0 { - allwinner,pins = "PA0", "PA1", "PA2", "PA3", - "PA9", "PA10", "PA11", - "PA12", "PA13", "PA14", "PA19", - "PA20", "PA25", "PA26", "PA27"; - allwinner,function = "gmac"; - /* - * data lines in RGMII mode use DDR mode - * and need a higher signal drive strength - */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + uart0_pins_a: uart0@0 { + pins = "PH20", "PH21"; + function = "uart0"; }; }; @@ -565,6 +614,19 @@ reg = <0x01c20ca0 0x20>; }; + spdif: spdif@01c21000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-spdif"; + reg = <0x01c21000 0x400>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB1_SPDIF>, <&ccu CLK_SPDIF>; + resets = <&ccu RST_APB1_SPDIF>; + clock-names = "apb", "spdif"; + dmas = <&dma 2>, <&dma 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + lradc: lradc@01c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; @@ -728,6 +790,19 @@ reset-names = "ahb"; }; + codec: codec@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-codec"; + reg = <0x01c22c00 0x400>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB1_CODEC>, <&ccu CLK_CODEC>; + clock-names = "apb", "codec"; + resets = <&ccu RST_APB1_CODEC>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + timer@01c60000 { compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer"; @@ -791,7 +866,7 @@ gic: interrupt-controller@01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, - <0x01c82000 0x1000>, + <0x01c82000 0x2000>, <0x01c84000 0x2000>, <0x01c86000 0x2000>; interrupt-controller; @@ -799,6 +874,115 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + fe0: display-frontend@01e00000 { + compatible = "allwinner,sun6i-a31-display-frontend"; + reg = <0x01e00000 0x20000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_FE0>, <&ccu CLK_FE0>, + <&ccu CLK_DRAM_FE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_FE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe0>; + }; + }; + }; + }; + + be0: display-backend@01e60000 { + compatible = "allwinner,sun6i-a31-display-backend"; + reg = <0x01e60000 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_BE0>, + <&ccu CLK_DRAM_BE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_BE0>; + + assigned-clocks = <&ccu CLK_BE0>; + assigned-clock-rates = <300000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be0_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be0>; + }; + }; + + be0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be0_out_drc0: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_in_be0>; + }; + }; + }; + }; + + drc0: drc@01e70000 { + compatible = "allwinner,sun6i-a31-drc"; + reg = <0x01e70000 0x10000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_DRC0>, <&ccu CLK_IEP_DRC0>, + <&ccu CLK_DRAM_DRC0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_DRC0>; + + assigned-clocks = <&ccu CLK_IEP_DRC0>; + assigned-clock-rates = <300000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + drc0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + drc0_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_drc0>; + }; + }; + + drc0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + drc0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_drc0>; + }; + }; + }; + }; + rtc: rtc@01f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; @@ -886,7 +1070,8 @@ reg = <0x01f02c00 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 0>; + clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; resets = <&apb0_rst 0>; gpio-controller; interrupt-controller; @@ -895,17 +1080,13 @@ #gpio-cells = <3>; ir_pins_a: ir@0 { - allwinner,pins = "PL4"; - allwinner,function = "s_ir"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL4"; + function = "s_ir"; }; p2wi_pins: p2wi { - allwinner,pins = "PL0", "PL1"; - allwinner,function = "s_p2wi"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL0", "PL1"; + function = "s_p2wi"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index 73c133f5e79c..2238eda318f6 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -134,24 +134,20 @@ &pio { gt911_int_primo81: gt911_int_pin@0 { - allwinner,pins = "PA3"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA3"; + function = "gpio_in"; }; mma8452_int_primo81: mma8452_int_pin@0 { - allwinner,pins = "PA9"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA9"; + function = "gpio_in"; + bias-pull-up; }; mmc0_cd_pin_primo81: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA8"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts index 6ead2f5c847a..7ff68bdd7109 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts @@ -65,6 +65,14 @@ }; }; +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "MIC1", "Mic", + "Mic", "MBIAS"; + status = "okay"; +}; + &ehci0 { /* USB 2.0 4 port hub IC */ status = "okay"; @@ -128,17 +136,14 @@ &pio { led_pin_sina31s: led_pin@0 { - allwinner,pins = "PH13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH13"; + function = "gpio_out"; }; mmc0_cd_pin_sina31s: mmc0_cd_pin@0 { - allwinner,pins = "PA4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA4"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -148,6 +153,11 @@ regulator-name = "vcc-gmac-phy"; }; +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + &usbphy { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index db7fa13f5425..3bd862bf82a9 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -122,7 +122,7 @@ }; &mmc0_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &mmc2 { @@ -144,7 +144,7 @@ }; &mmc2_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &ohci0 { @@ -153,33 +153,26 @@ &pio { gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 { - allwinner,pins = "PA21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA21"; + function = "gpio_out"; }; led_pins_bpi_m2: led_pins@0 { - allwinner,pins = "PG5", "PG10", "PG11"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG5", "PG10", "PG11"; + function = "gpio_out"; }; mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 { - allwinner,pins = "PA4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA4"; + function = "gpio_in"; + bias-pull-up; }; }; &r_pio { mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 { - allwinner,pins = "PL8"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL8"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts index d6ad6196a768..154ebf5082ed 100644 --- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -92,10 +92,9 @@ &pio { mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA8"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -110,7 +109,7 @@ }; &mmc0_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &p2wi { diff --git a/arch/arm/boot/dts/sun6i-a31s.dtsi b/arch/arm/boot/dts/sun6i-a31s.dtsi index c17a32771b98..97e2c51d0aea 100644 --- a/arch/arm/boot/dts/sun6i-a31s.dtsi +++ b/arch/arm/boot/dts/sun6i-a31s.dtsi @@ -48,6 +48,14 @@ #include "sun6i-a31.dtsi" +&de { + compatible = "allwinner,sun6i-a31s-display-engine"; +}; + &pio { compatible = "allwinner,sun6i-a31s-pinctrl"; }; + +&tcon0 { + compatible = "allwinner,sun6i-a31s-tcon"; +}; diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi index 0c434304e040..edaba5f904fd 100644 --- a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi @@ -77,17 +77,15 @@ &pio { mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA8"; + function = "gpio_in"; + bias-pull-up; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA15"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts index ba5bca0fe997..08e776ae095a 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -105,6 +105,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &ehci0 { status = "okay"; }; @@ -132,16 +136,14 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; }; }; +#include "axp209.dtsi" + &ir0 { pinctrl-names = "default"; pinctrl-0 = <&ir0_rx_pins_a>; @@ -167,7 +169,7 @@ mmc-pwrseq = <&mmc3_pwrseq>; bus-width = <4>; non-removable; - enable-sdio-wakeup; + wakeup-source; status = "okay"; brcmf: bcrmf@1 { @@ -181,7 +183,7 @@ &mmc3_pins_a { /* AP6210 requires pull-up */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &ohci0 { @@ -192,38 +194,81 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { gmac_power_pin_bpi_m1p: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH23"; + function = "gpio_out"; }; led_pins_bpi_m1p: led_pins@0 { - allwinner,pins = "PH24", "PH25"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH24", "PH25"; + function = "gpio_out"; }; mmc0_cd_pin_bpi_m1p: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH10"; + function = "gpio_in"; + bias-pull-up; }; mmc3_pwrseq_pin_bpi_m1p: mmc3_pwrseq_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH22"; + function = "gpio_out"; }; }; +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; + /* VBUS on usb host ports are tied to DC5V and therefore always on */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 67c8a7644b99..91f2e5f9efcb 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -179,31 +179,25 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH10"; + function = "gpio_in"; + bias-pull-up; }; gmac_power_pin_bananapi: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH23"; + function = "gpio_out"; }; led_pins_bananapi: led_pins@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH24"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts index 18fcc87f4621..83516bc81225 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts @@ -76,6 +76,13 @@ }; }; + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&vmmc3_pin_bananapro>; + reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; + }; + reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -87,23 +94,16 @@ enable-active-high; gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; }; - - reg_vmmc3: vmmc3 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&vmmc3_pin_bananapro>; - regulator-name = "vmmc3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; - }; }; &ahci { status = "okay"; }; +&codec { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -166,10 +166,19 @@ &mmc3 { pinctrl-names = "default"; pinctrl-0 = <&mmc3_pins_a>; - vmmc-supply = <®_vmmc3>; + vmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; non-removable; status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + }; }; &ohci0 { @@ -182,45 +191,34 @@ &pio { gmac_power_pin_bananapro: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH23"; + function = "gpio_out"; }; led_pins_bananapro: led_pins@0 { - allwinner,pins = "PH24", "PG2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH24", "PG2"; + function = "gpio_out"; }; mmc0_cd_pin_bananapro: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH10"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { - allwinner,pins = "PH0"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH0"; + function = "gpio_out"; }; usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { - allwinner,pins = "PH1"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH1"; + function = "gpio_out"; }; vmmc3_pin_bananapro: vmmc3_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH22"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 1fa832d7b469..4dc1e10f88c4 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -160,17 +160,14 @@ &pio { led_pins_cubieboard2: led_pins@0 { - allwinner,pins = "PH20", "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH20", "PH21"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 83f39b0362cb..f019aa3fe96d 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -207,7 +207,7 @@ &mmc3_pins_a { /* AP6210 requires pull-up */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &ohci0 { @@ -224,45 +224,33 @@ &pio { ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { - allwinner,pins = "PH12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH12"; + function = "gpio_out"; }; led_pins_cubietruck: led_pins@0 { - allwinner,pins = "PH7", "PH11", "PH20", "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH7", "PH11", "PH20", "PH21"; + function = "gpio_out"; }; mmc3_pwrseq_pin_cubietruck: mmc3_pwrseq_pin@0 { - allwinner,pins = "PH9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH9"; + function = "gpio_out"; }; usb0_vbus_pin_a: usb0_vbus_pin@0 { - allwinner,pins = "PH17"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH17"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH19"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH19"; + function = "gpio_in"; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH22"; + function = "gpio_in"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts index 37f4a5497452..e921ba42f170 100644 --- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts @@ -188,31 +188,23 @@ &pio { ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH15"; + function = "gpio_out"; }; usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; }; mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 { - allwinner,pins = "PH9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH9"; + function = "gpio_out"; }; gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 { - allwinner,pins = "PH16"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH16"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index 1e6bd360dac0..385fd8232ae0 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -185,7 +185,7 @@ &mmc3_pins_a { /* AP6210 / AP6330 requires pull-up */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &ohci0 { @@ -198,31 +198,23 @@ &pio { vmmc3_pin_i12_tvbox: vmmc3_pin@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; }; vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 { - allwinner,pins = "PH12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH12"; + function = "gpio_out"; }; gmac_power_pin_i12_tvbox: gmac_power_pin@0 { - allwinner,pins = "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH21"; + function = "gpio_out"; }; led_pins_i12_tvbox: led_pins@0 { - allwinner,pins = "PH9", "PH20"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH9", "PH20"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts index 10d48cbf81ff..d52222c82cb8 100644 --- a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts +++ b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts @@ -131,10 +131,9 @@ &pio { led_pins_itead_core: led_pins@0 { - allwinner,pins = "PH20","PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH20","PH21"; + function = "gpio_out"; + drive-strength = <20>; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts index 73c05dab0a69..72ec0d5ae052 100644 --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -87,7 +87,7 @@ }; &ahci_pwr_pin_a { - allwinner,pins = "PB3"; + pins = "PB3"; }; &ahci { @@ -222,31 +222,25 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH10"; + function = "gpio_in"; + bias-pull-up; }; gmac_power_pin_lamobo_r1: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH23"; + function = "gpio_out"; }; led_pins_lamobo_r1: led_pins@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH24"; + function = "gpio_out"; }; }; @@ -327,7 +321,7 @@ }; &usb2_vbus_pin_a { - allwinner,pins = "PH12"; + pins = "PH12"; }; &usbphy { diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts index 8d9ea48dd98c..0e074bd0e8c9 100644 --- a/arch/arm/boot/dts/sun7i-a20-m3.dts +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -145,10 +145,8 @@ &pio { led_pins_m3: led_pins@0 { - allwinner,pins = "PH20"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH20"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts index 90ff4a267025..97d7a8b65a03 100644 --- a/arch/arm/boot/dts/sun7i-a20-mk808c.dts +++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts @@ -132,17 +132,13 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH4"; + function = "gpio_in"; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH5"; + function = "gpio_in"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts index 23aacce4d6c7..a1450c10b08e 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts @@ -88,6 +88,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &codec { status = "okay"; }; @@ -116,6 +120,18 @@ }; }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + &lradc { vref-supply = <®_vcc3v0>; status = "okay"; @@ -204,38 +220,30 @@ &pio { ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 { - allwinner,pins = "PC3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC3"; + function = "gpio_out"; }; led_pins_olimex_som_evb: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; + drive-strength = <20>; }; mmc3_cd_pin_olimex_som_evb: mmc3_cd_pin@0 { - allwinner,pins = "PH0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH0"; + function = "gpio_in"; + bias-pull-up; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH4"; + function = "gpio_in"; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH5"; + function = "gpio_in"; }; }; @@ -284,12 +292,38 @@ status = "okay"; }; +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>, + <&spi1_cs0_pins_a>; + status = "okay"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>, + <&spi2_cs0_pins_a>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&uart6_pins_a>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; + &usb_otg { dr_mode = "otg"; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index 35ad7006c53c..1297432c2802 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -153,31 +153,26 @@ &pio { ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - allwinner,pins = "PC3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC3"; + function = "gpio_out"; }; led_pins_olinuxinolime: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts index 5ea4915f6d75..81f376f2a44d 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts @@ -56,11 +56,9 @@ }; &pio { - mmc2_pins_nrst: mmc2@0 { - allwinner,pins = "PC16"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + mmc2_pins_nrst: mmc2-rst-pin { + pins = "PC16"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index d5c796c8d16f..71cca5360728 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -112,57 +112,9 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; - - acin-supply = <®_axp_ipsout>; - vin2-supply = <®_axp_ipsout>; - vin3-supply = <®_axp_ipsout>; - ldo24in-supply = <®_axp_ipsout>; - ldo3in-supply = <®_axp_ipsout>; - - regulators { - vdd_rtc: ldo1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - }; - - avcc: ldo2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vcc_csi0: ldo3 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <3500000>; - regulator-always-on; - }; - - vcc_csi1: ldo4 { - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_cpu: dcdc2 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <2275000>; - regulator-always-on; - }; - - vdd_int: dcdc3 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <3500000>; - regulator-always-on; - }; - }; }; }; @@ -202,38 +154,31 @@ &pio { ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - allwinner,pins = "PC3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC3"; + function = "gpio_out"; }; led_pins_olinuxinolime: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; usb0_vbus_pin_lime2: usb0_vbus_pin@0 { - allwinner,pins = "PC17"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC17"; + function = "gpio_out"; }; }; @@ -243,6 +188,48 @@ status = "okay"; }; +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-always-on; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vddio-csi0"; +}; + +®_ldo4 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vddio-csi1"; +}; + ®_usb0_vbus { pinctrl-0 = <&usb0_vbus_pin_lime2>; gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 7e3006f6a775..223fbd9f7c62 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -227,31 +227,27 @@ &pio { mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { - allwinner,pins = "PH11"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH11"; + function = "gpio_in"; + bias-pull-up; }; led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts index 2be04c438b1e..a74265749227 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts @@ -166,52 +166,41 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH10"; + function = "gpio_in"; + bias-pull-up; }; mmc3_cd_pin_orangepi: mmc3_cd_pin@0 { - allwinner,pins = "PH11"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH11"; + function = "gpio_in"; + bias-pull-up; }; usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH22"; + function = "gpio_out"; }; gmac_power_pin_orangepi: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH23"; + function = "gpio_out"; }; led_pins_orangepi: led_pins@0 { - allwinner,pins = "PH24", "PH25"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH24", "PH25"; + function = "gpio_out"; }; usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { - allwinner,pins = "PH26"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH26"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts index 71125bf64575..3de980c8f8ff 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts @@ -147,45 +147,35 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH10"; + function = "gpio_in"; + bias-pull-up; }; usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH22"; + function = "gpio_out"; }; gmac_power_pin_orangepi: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH23"; + function = "gpio_out"; }; led_pins_orangepi: led_pins@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH24"; + function = "gpio_out"; }; usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { - allwinner,pins = "PH26"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH26"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index ddac7328b852..f47a5c46bc20 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -152,31 +152,24 @@ &pio { ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; }; led_pins_pcduino3_nano: led_pins@0 { - allwinner,pins = "PH16", "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH16", "PH15"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 { - allwinner,pins = "PD2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PD2"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index 1a8b39be1d61..4599f98a3aee 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -108,7 +108,7 @@ }; &ahci_pwr_pin_a { - allwinner,pins = "PH2"; + pins = "PH2"; }; &codec { @@ -183,24 +183,19 @@ &pio { led_pins_pcduino3: led_pins@0 { - allwinner,pins = "PH15", "PH16"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH15", "PH16"; + function = "gpio_out"; }; key_pins_pcduino3: key_pins@0 { - allwinner,pins = "PH17", "PH18", "PH19"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH17", "PH18", "PH19"; + function = "gpio_in"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts index 2f6b21adddd9..e19f17177755 100644 --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts @@ -173,31 +173,24 @@ &pio { bl_enable_pin: bl_enable_pin@0 { - allwinner,pins = "PH7"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH7"; + function = "gpio_out"; }; codec_pa_pin: codec_pa_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH15"; + function = "gpio_out"; }; ts_reset_pin: ts_reset_pin@0 { - allwinner,pins = "PB13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB13"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts index dc31d476ef81..c3078d4f1093 100644 --- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts +++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts @@ -160,17 +160,14 @@ &pio { vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 { - allwinner,pins = "PH9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH9"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 94cf5a1c7172..2db97fc820dd 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -871,6 +871,7 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; + num-cs = <4>; }; spi1: spi@01c06000 { @@ -885,6 +886,7 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; + num-cs = <1>; }; emac: ethernet@01c0b000 { @@ -1037,6 +1039,7 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; + num-cs = <1>; }; ahci: sata@01c18000 { @@ -1079,315 +1082,246 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; + num-cs = <1>; }; pio: pinctrl@01c20800 { compatible = "allwinner,sun7i-a20-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 5>; + clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; #gpio-cells = <3>; clk_out_a_pins_a: clk_out_a@0 { - allwinner,pins = "PI12"; - allwinner,function = "clk_out_a"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI12"; + function = "clk_out_a"; }; clk_out_b_pins_a: clk_out_b@0 { - allwinner,pins = "PI13"; - allwinner,function = "clk_out_b"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI13"; + function = "clk_out_b"; }; emac_pins_a: emac0@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "emac"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + function = "emac"; }; gmac_pins_mii_a: gmac_mii@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "gmac"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + function = "gmac"; }; gmac_pins_rgmii_a: gmac_rgmii@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA10", - "PA11", "PA12", "PA13", - "PA15", "PA16"; - allwinner,function = "gmac"; + pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA10", + "PA11", "PA12", "PA13", + "PA15", "PA16"; + function = "gmac"; /* * data lines in RGMII mode use DDR mode * and need a higher signal drive strength */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + drive-strength = <40>; }; i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB0", "PB1"; + function = "i2c0"; }; i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB18", "PB19"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB18", "PB19"; + function = "i2c1"; }; i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB20", "PB21"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB20", "PB21"; + function = "i2c2"; }; i2c3_pins_a: i2c3@0 { - allwinner,pins = "PI0", "PI1"; - allwinner,function = "i2c3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI0", "PI1"; + function = "i2c3"; }; ir0_rx_pins_a: ir0@0 { - allwinner,pins = "PB4"; - allwinner,function = "ir0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB4"; + function = "ir0"; }; ir0_tx_pins_a: ir0@1 { - allwinner,pins = "PB3"; - allwinner,function = "ir0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB3"; + function = "ir0"; }; ir1_rx_pins_a: ir1@0 { - allwinner,pins = "PB23"; - allwinner,function = "ir1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB23"; + function = "ir1"; }; ir1_tx_pins_a: ir1@1 { - allwinner,pins = "PB22"; - allwinner,function = "ir1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB22"; + function = "ir1"; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", - "PF3", "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { - allwinner,pins = "PH1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH1"; + function = "gpio_in"; + bias-pull-up; }; mmc2_pins_a: mmc2@0 { - allwinner,pins = "PC6", "PC7", "PC8", - "PC9", "PC10", "PC11"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PC6", "PC7", "PC8", + "PC9", "PC10", "PC11"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; }; mmc3_pins_a: mmc3@0 { - allwinner,pins = "PI4", "PI5", "PI6", - "PI7", "PI8", "PI9"; - allwinner,function = "mmc3"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI4", "PI5", "PI6", + "PI7", "PI8", "PI9"; + function = "mmc3"; + drive-strength = <30>; + bias-pull-up; }; ps20_pins_a: ps20@0 { - allwinner,pins = "PI20", "PI21"; - allwinner,function = "ps2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI20", "PI21"; + function = "ps2"; }; ps21_pins_a: ps21@0 { - allwinner,pins = "PH12", "PH13"; - allwinner,function = "ps2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH12", "PH13"; + function = "ps2"; }; pwm0_pins_a: pwm0@0 { - allwinner,pins = "PB2"; - allwinner,function = "pwm"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "pwm"; }; pwm1_pins_a: pwm1@0 { - allwinner,pins = "PI3"; - allwinner,function = "pwm"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI3"; + function = "pwm"; }; spdif_tx_pins_a: spdif@0 { - allwinner,pins = "PB13"; - allwinner,function = "spdif"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PB13"; + function = "spdif"; + bias-pull-up; }; spi0_pins_a: spi0@0 { - allwinner,pins = "PI11", "PI12", "PI13"; - allwinner,function = "spi0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI11", "PI12", "PI13"; + function = "spi0"; }; spi0_cs0_pins_a: spi0_cs0@0 { - allwinner,pins = "PI10"; - allwinner,function = "spi0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI10"; + function = "spi0"; }; spi0_cs1_pins_a: spi0_cs1@0 { - allwinner,pins = "PI14"; - allwinner,function = "spi0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI14"; + function = "spi0"; }; spi1_pins_a: spi1@0 { - allwinner,pins = "PI17", "PI18", "PI19"; - allwinner,function = "spi1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI17", "PI18", "PI19"; + function = "spi1"; }; spi1_cs0_pins_a: spi1_cs0@0 { - allwinner,pins = "PI16"; - allwinner,function = "spi1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI16"; + function = "spi1"; }; spi2_pins_a: spi2@0 { - allwinner,pins = "PC20", "PC21", "PC22"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC20", "PC21", "PC22"; + function = "spi2"; }; spi2_pins_b: spi2@1 { - allwinner,pins = "PB15", "PB16", "PB17"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB15", "PB16", "PB17"; + function = "spi2"; }; spi2_cs0_pins_a: spi2_cs0@0 { - allwinner,pins = "PC19"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC19"; + function = "spi2"; }; spi2_cs0_pins_b: spi2_cs0@1 { - allwinner,pins = "PB14"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB14"; + function = "spi2"; }; uart0_pins_a: uart0@0 { - allwinner,pins = "PB22", "PB23"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB22", "PB23"; + function = "uart0"; }; uart2_pins_a: uart2@0 { - allwinner,pins = "PI16", "PI17", "PI18", "PI19"; - allwinner,function = "uart2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI16", "PI17", "PI18", "PI19"; + function = "uart2"; }; uart3_pins_a: uart3@0 { - allwinner,pins = "PG6", "PG7", "PG8", "PG9"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG6", "PG7", "PG8", "PG9"; + function = "uart3"; }; uart3_pins_b: uart3@1 { - allwinner,pins = "PH0", "PH1"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH0", "PH1"; + function = "uart3"; }; uart4_pins_a: uart4@0 { - allwinner,pins = "PG10", "PG11"; - allwinner,function = "uart4"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG10", "PG11"; + function = "uart4"; }; uart4_pins_b: uart4@1 { - allwinner,pins = "PH4", "PH5"; - allwinner,function = "uart4"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH4", "PH5"; + function = "uart4"; }; uart5_pins_a: uart5@0 { - allwinner,pins = "PI10", "PI11"; - allwinner,function = "uart5"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI10", "PI11"; + function = "uart5"; }; uart6_pins_a: uart6@0 { - allwinner,pins = "PI12", "PI13"; - allwinner,function = "uart6"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI12", "PI13"; + function = "uart6"; }; uart7_pins_a: uart7@0 { - allwinner,pins = "PI20", "PI21"; - allwinner,function = "uart7"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI20", "PI21"; + function = "uart7"; }; }; @@ -1685,9 +1619,9 @@ }; gic: interrupt-controller@01c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400", "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, - <0x01c82000 0x1000>, + <0x01c82000 0x2000>, <0x01c84000 0x2000>, <0x01c86000 0x2000>; interrupt-controller; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 300a1bd5a6ec..a952cc0703cc 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -84,7 +84,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; @@ -106,14 +106,16 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; + clock-accuracy = <50000>; clock-output-names = "osc24M"; }; - osc32k: osc32k_clk { + ext_osc32k: ext_osc32k_clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; - clock-output-names = "osc32k"; + clock-accuracy = <50000>; + clock-output-names = "ext-osc32k"; }; }; @@ -256,7 +258,7 @@ ccu: clock@01c20000 { reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; + clocks = <&osc24M>, <&rtc 0>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -266,95 +268,80 @@ /* compatible gets set in SoC specific dtsi file */ reg = <0x01c20800 0x400>; /* interrupts get set in SoC specific dtsi file */ - clocks = <&ccu CLK_BUS_PIO>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; + clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; #gpio-cells = <3>; uart0_pins_a: uart0@0 { - allwinner,pins = "PF2", "PF4"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF2", "PF4"; + function = "uart0"; }; uart1_pins_a: uart1@0 { - allwinner,pins = "PG6", "PG7"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG6", "PG7"; + function = "uart1"; }; uart1_pins_cts_rts_a: uart1-cts-rts@0 { - allwinner,pins = "PG8", "PG9"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG8", "PG9"; + function = "uart1"; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", - "PF3", "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; mmc1_pins_a: mmc1@0 { - allwinner,pins = "PG0", "PG1", "PG2", - "PG3", "PG4", "PG5"; - allwinner,function = "mmc1"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG0", "PG1", "PG2", + "PG3", "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; }; mmc2_8bit_pins: mmc2_8bit { - allwinner,pins = "PC5", "PC6", "PC8", - "PC9", "PC10", "PC11", - "PC12", "PC13", "PC14", - "PC15", "PC16"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC5", "PC6", "PC8", + "PC9", "PC10", "PC11", + "PC12", "PC13", "PC14", + "PC15", "PC16"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; }; pwm0_pins: pwm0 { - allwinner,pins = "PH0"; - allwinner,function = "pwm0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH0"; + function = "pwm0"; }; i2c0_pins_a: i2c0@0 { - allwinner,pins = "PH2", "PH3"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2", "PH3"; + function = "i2c0"; }; i2c1_pins_a: i2c1@0 { - allwinner,pins = "PH4", "PH5"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH4", "PH5"; + function = "i2c1"; }; i2c2_pins_a: i2c2@0 { - allwinner,pins = "PE12", "PE13"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PE12", "PE13"; + function = "i2c2"; }; lcd_rgb666_pins: lcd-rgb666@0 { - allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", - "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", - "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", - "PD24", "PD25", "PD26", "PD27"; - allwinner,function = "lcd0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", + "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + function = "lcd0"; }; }; @@ -485,10 +472,36 @@ #size-cells = <0>; }; + mali: gpu@1c40000 { + compatible = "allwinner,sun8i-a23-mali", + "allwinner,sun7i-a20-mali", "arm,mali-400"; + reg = <0x01c40000 0x10000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pmu"; + clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_BUS_GPU>; + + assigned-clocks = <&ccu CLK_GPU>; + assigned-clock-rates = <408000000>; + }; + gic: interrupt-controller@01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, - <0x01c82000 0x1000>, + <0x01c82000 0x2000>, <0x01c84000 0x2000>, <0x01c86000 0x2000>; interrupt-controller; @@ -501,6 +514,9 @@ reg = <0x01f00000 0x54>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clock-output-names = "osc32k"; + clocks = <&ext_osc32k>; + #clock-cells = <1>; }; nmi_intc: interrupt-controller@01f00c0c { @@ -553,6 +569,10 @@ compatible = "allwinner,sun6i-a31-clock-reset"; #reset-cells = <1>; }; + + codec_analog: codec-analog { + compatible = "allwinner,sun8i-a23-codec-analog"; + }; }; cpucfg@01f01c00 { @@ -575,7 +595,8 @@ compatible = "allwinner,sun8i-a23-r-pinctrl"; reg = <0x01f02c00 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 0>; + clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>; + clock-names = "apb", "hosc", "losc"; resets = <&apb0_rst 0>; gpio-controller; interrupt-controller; @@ -585,17 +606,15 @@ #gpio-cells = <3>; r_rsb_pins: r_rsb { - allwinner,pins = "PL0", "PL1"; - allwinner,function = "s_rsb"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PL0", "PL1"; + function = "s_rsb"; + drive-strength = <20>; + bias-pull-up; }; r_uart_pins_a: r_uart@0 { - allwinner,pins = "PL2", "PL3"; - allwinner,function = "s_uart"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL2", "PL3"; + function = "s_uart"; }; }; diff --git a/arch/arm/boot/dts/sun8i-a23-evb.dts b/arch/arm/boot/dts/sun8i-a23-evb.dts index 610786e635fa..c21f5b1b255e 100644 --- a/arch/arm/boot/dts/sun8i-a23-evb.dts +++ b/arch/arm/boot/dts/sun8i-a23-evb.dts @@ -115,10 +115,9 @@ &pio { mmc0_cd_pin_evb: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PB4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts index a86cbedda34c..649e31339662 100644 --- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts +++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts @@ -86,25 +86,16 @@ }; &mmc1_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &r_pio { wifi_pwrseq_pin_mid2407: wifi_pwrseq_pin@0 { - allwinner,pins = "PL6"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL6"; + function = "gpio_out"; }; }; -®_ldo_io1 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-touchscreen"; - status = "okay"; -}; - &touchscreen { reg = <0x40>; compatible = "silead,gsl1680"; diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts index 9955f85f9147..6b3bcae089f2 100644 --- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts +++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts @@ -79,15 +79,13 @@ }; &mmc1_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &r_pio { wifi_pwrseq_pin_mid2809: wifi_pwrseq_pin@0 { - allwinner,pins = "PL6"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL6"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts index 956320a6cc78..3ab5c0c09d93 100644 --- a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts +++ b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts @@ -48,3 +48,26 @@ model = "Q8 A23 Tablet"; compatible = "allwinner,q8-a23", "allwinner,sun8i-a23"; }; + +&codec { + pinctrl-0 = <&codec_pa_pin>; + allwinner,pa-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + allwinner,audio-routing = + "Headphone", "HP", + "Headphone", "HPCOM", + "Speaker", "HP", + "MIC1", "Mic", + "MIC2", "Headset Mic", + "Mic", "MBIAS", + "Headset Mic", "HBIAS"; + status = "okay"; +}; + +&pio { + codec_pa_pin: codec_pa_pin@0 { + allwinner,pins = "PH9"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 54d045dab825..4d1f929780a8 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -48,6 +48,22 @@ memory { reg = <0x40000000 0x40000000>; }; + + soc@01c00000 { + codec: codec@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-a23-codec"; + reg = <0x01c22c00 0x400>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; + clock-names = "apb", "codec"; + resets = <&ccu RST_BUS_CODEC>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "rx", "tx"; + allwinner,codec-analog-controls = <&codec_analog>; + status = "disabled"; + }; + }; }; &ccu { diff --git a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts index fb4665576dff..3e05959104f1 100644 --- a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts +++ b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts @@ -71,7 +71,7 @@ }; &mmc1_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &mmc1 { @@ -89,10 +89,9 @@ &r_pio { led_pin_d978: led_pin_d978@0 { - allwinner,pins = "PL5"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL5"; + function = "gpio_out"; + drive-strength = <20>; }; }; diff --git a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts index 9ea637e82b2d..be9a6b8d7a1e 100644 --- a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts +++ b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts @@ -92,24 +92,18 @@ &pio { led_pin_olinuxino: led_pins@0 { - allwinner,pins = "PB7"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB7"; + function = "gpio_out"; }; mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB4"; + function = "gpio_in"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PB3"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB3"; + function = "gpio_in"; }; }; @@ -126,7 +120,7 @@ }; }; -#include "axp22x.dtsi" +#include "axp223.dtsi" ®_aldo1 { regulator-always-on; diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts index fef6abc0a703..03b89bdd55ba 100644 --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -61,6 +61,35 @@ chosen { stdout-path = "serial0:115200n8"; }; + + panel { + compatible = "netron-dy,e231732"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + panel_input: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_panel>; + }; + }; + }; +}; + +&codec { + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&dai { + status = "okay"; }; &ehci0 { @@ -115,9 +144,9 @@ &mmc2_8bit_pins { /* Increase drive strength for DDR modes */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; + drive-strength = <40>; /* eMMC is missing pull-ups */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &ohci0 { @@ -126,10 +155,9 @@ &pio { mmc0_cd_pin_sina33: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PB4"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -145,7 +173,7 @@ }; }; -#include "axp22x.dtsi" +#include "axp223.dtsi" ®_aldo1 { regulator-always-on; @@ -207,12 +235,34 @@ regulator-name = "vcc-rtc"; }; +&sound { + status = "okay"; +}; + +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rgb666_pins>; + status = "okay"; +}; + +&tcon0_out { + tcon0_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_b>; status = "okay"; }; +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + &usbphy { status = "okay"; usb1_vbus-supply = <®_vcc5v0>; /* USB1 VBUS is always on */ diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index fd1e1cddd4a8..18c174fef84f 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -45,7 +45,42 @@ #include "sun8i-a23-a33.dtsi" / { + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp@648000000 { + opp-hz = /bits/ 64 <648000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1200000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1320000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + }; + cpus { + cpu@0 { + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; + operating-points-v2 = <&cpu0_opp_table>; + }; + cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; @@ -69,6 +104,28 @@ reg = <0x40000000 0x80000000>; }; + sound: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "sun8i-a33-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&link_codec>; + simple-audio-card,bitclock-master = <&link_codec>; + simple-audio-card,mclk-fs = <512>; + simple-audio-card,aux-devs = <&codec_analog>; + simple-audio-card,routing = + "Left DAC", "Digital Left DAC", + "Right DAC", "Digital Right DAC"; + status = "disabled"; + + simple-audio-card,cpu { + sound-dai = <&dai>; + }; + + link_codec: simple-audio-card,codec { + sound-dai = <&codec>; + }; + }; + soc@01c00000 { tcon0: lcd-controller@01c0c000 { compatible = "allwinner,sun8i-a33-tcon"; @@ -116,6 +173,29 @@ reset-names = "ahb"; }; + dai: dai@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-i2s"; + reg = <0x01c22c00 0x200>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; + clock-names = "apb", "mod"; + resets = <&ccu RST_BUS_CODEC>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + codec: codec@01c22e00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-a33-codec"; + reg = <0x01c22e00 0x400>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; + clock-names = "bus", "mod"; + status = "disabled"; + }; + fe0: display-frontend@01e00000 { compatible = "allwinner,sun8i-a33-display-frontend"; reg = <0x01e00000 0x20000>; @@ -238,10 +318,8 @@ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; uart0_pins_b: uart0@1 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB0", "PB1"; + function = "uart0"; }; }; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index d3473f81b12f..a789a7caf217 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -167,25 +167,21 @@ #gpio-cells = <3>; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", - "PF3", "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; uart0_pins_a: uart0@0 { - allwinner,pins = "PF2", "PF4"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF2", "PF4"; + function = "uart0"; }; uart0_pins_b: uart0@1 { - allwinner,pins = "PB9", "PB10"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB9", "PB10"; + function = "uart0"; }; }; @@ -217,7 +213,7 @@ gic: interrupt-controller@01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, - <0x01c82000 0x1000>, + <0x01c82000 0x2000>, <0x01c84000 0x2000>, <0x01c86000 0x2000>; interrupt-controller; diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts new file mode 100644 index 000000000000..b7ca916d871d --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts @@ -0,0 +1,160 @@ +/* + * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz> + * + * Based on sun8i-h3-orangepi-one.dts, which is: + * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Xunlong Orange Pi Zero"; + compatible = "xunlong,orangepi-zero", "allwinner,sun8i-h2-plus"; + + aliases { + serial0 = &uart0; + /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ + ethernet1 = &xr819; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr_led { + label = "orangepi:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + status_led { + label = "orangepi:red:status"; + gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_vcc_wifi: reg_vcc_wifi { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; + enable-active-high; + gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <200>; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc_wifi>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + /* + * Explicitly define the sdio device, so that we can add an ethernet + * alias for it (which e.g. makes u-boot set a mac-address). + */ + xr819: sdio_wifi@1 { + reg = <1>; + }; +}; + +&mmc1_pins_a { + bias-pull-up; +}; + +&ohci1 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +&usbphy { + /* USB VBUS is always on */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts index 06fddaae8edd..c0c49dd4d3b2 100644 --- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts @@ -156,24 +156,18 @@ &r_pio { pwr_led_bpi_m2p: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL10"; + function = "gpio_out"; }; sw_r_bpi_m2p: key_pins@0 { - allwinner,pins = "PL3"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL3"; + function = "gpio_in"; }; wifi_en_bpi_m2p: wifi_en_pin { - allwinner,pins = "PL7"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL7"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts new file mode 100644 index 000000000000..25b225b7dfd6 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts @@ -0,0 +1,160 @@ +/* + * Copyright (C) 2017 Marcus Cooper <codekipper@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Beelink X2"; + compatible = "roofull,beelink-x2", "allwinner,sun8i-h3"; + + aliases { + serial0 = &uart0; + /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ + ethernet1 = &sdiowifi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + blue { + label = "beelink-x2:blue:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + default-state = "on"; + }; + + red { + label = "beelink-x2:red:standby"; + gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + }; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + }; + + sound_spdif { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; + + /* + * Explicitly define the sdio device, so that we can add an ethernet + * alias for it (which e.g. makes u-boot set a mac-address). + */ + sdiowifi: sdio_wifi@1 { + reg = <1>; + }; +}; + +&ohci1 { + status = "okay"; +}; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + /* USB VBUS is on as long as VCC-IO is on */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts new file mode 100644 index 000000000000..ec63d104b404 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun8i-h3-nanopi.dtsi" + +/ { + model = "FriendlyArm NanoPi M1"; + compatible = "friendlyarm,nanopi-m1", "allwinner,sun8i-h3"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts index 3d64cafc1e90..8d2cc6e9a03f 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts @@ -40,86 +40,9 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/dts-v1/; -#include "sun8i-h3.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> +#include "sun8i-h3-nanopi.dtsi" / { model = "FriendlyARM NanoPi NEO"; compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>, <&leds_r_opc>; - - pwr { - label = "nanopi:green:pwr"; - gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ - default-state = "on"; - }; - - status { - label = "nanopi:blue:status"; - gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */ - }; - }; -}; - -&ehci3 { - status = "okay"; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; - status = "okay"; -}; - -&ohci3 { - status = "okay"; -}; - -&pio { - leds_opc: led-pins { - allwinner,pins = "PA10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; -}; - -&r_pio { - leds_r_opc: led-pins { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - -&usbphy { - /* USB VBUS is always on */ - status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi new file mode 100644 index 000000000000..2216e68d1838 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi @@ -0,0 +1,138 @@ +/* + * Copyright (C) 2016 James Pettigrew <james@innovum.com.au> + * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_npi>, <&leds_r_npi>; + + status { + label = "nanopi:blue:status"; + gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + pwr { + label = "nanopi:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + r_gpio_keys { + compatible = "gpio-keys"; + input-name = "k1"; + pinctrl-names = "default"; + pinctrl-0 = <&sw_r_npi>; + + k1@0 { + label = "k1"; + linux,code = <KEY_POWER>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&ehci3 { + status = "okay"; +}; + +&mmc0 { + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; + cd-inverted; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + status = "okay"; + vmmc-supply = <®_vcc3v3>; +}; + +&ohci3 { + status = "okay"; +}; + +&pio { + leds_npi: led_pins@0 { + pins = "PA10"; + function = "gpio_out"; + }; +}; + +&r_pio { + leds_r_npi: led_pins@0 { + pins = "PL10"; + function = "gpio_out"; + }; + + sw_r_npi: key_pins@0 { + pins = "PL3"; + function = "gpio_in"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts index e5bcaba3e87f..047e9e1c6093 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts @@ -145,33 +145,25 @@ &pio { leds_opc: led_pins@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA15"; + function = "gpio_out"; }; }; &r_pio { leds_r_opc: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL10"; + function = "gpio_out"; }; sw_r_opc: key_pins@0 { - allwinner,pins = "PL3", "PL4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL3", "PL4"; + function = "gpio_in"; }; wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin@0 { - allwinner,pins = "PL7"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL7"; + function = "gpio_out"; }; }; @@ -205,7 +197,7 @@ }; &usb1_vbus_pin_a { - allwinner,pins = "PG13"; + pins = "PG13"; }; &usbphy { diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts index 1550fee1ec68..22b99b407019 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts @@ -143,26 +143,20 @@ &pio { leds_opc: led_pins@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA15"; + function = "gpio_out"; }; }; &r_pio { leds_r_opc: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL10"; + function = "gpio_out"; }; sw_r_opc: key_pins@0 { - allwinner,pins = "PL3"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL3"; + function = "gpio_in"; }; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts index 5c9b5bfa5c21..34da853ee037 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts @@ -110,26 +110,20 @@ &pio { leds_opc: led_pins@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA15"; + function = "gpio_out"; }; }; &r_pio { leds_r_opc: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL10"; + function = "gpio_out"; }; sw_r_opc: key_pins@0 { - allwinner,pins = "PL3"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL3"; + function = "gpio_in"; }; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts index 851fd2c2cc8c..8b93f5c781a7 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts @@ -82,7 +82,7 @@ &mmc2_8bit_pins { /* Increase drive strength for DDR modes */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; + drive-strength = <40>; /* eMMC is missing pull-ups */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts index 3ec971285aa3..d43978d3294e 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts @@ -90,6 +90,14 @@ }; }; +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "MIC1", "Mic", + "Mic", "MBIAS"; + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -132,26 +140,20 @@ &pio { leds_opc: led_pins@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA15"; + function = "gpio_out"; }; }; &r_pio { leds_r_opc: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL10"; + function = "gpio_out"; }; sw_r_opc: key_pins@0 { - allwinner,pins = "PL3"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL3"; + function = "gpio_in"; }; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index bb585918cf54..8c40ab7bfa72 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -76,17 +76,15 @@ &mmc2_8bit_pins { /* Increase drive strength for DDR modes */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; + drive-strength = <40>; /* eMMC is missing pull-ups */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &pio { usb3_vbus_pin_a: usb3_vbus_pin@0 { - allwinner,pins = "PG11"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG11"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index f4ba088b225e..27780b97c863 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -321,99 +321,98 @@ reg = <0x01c20800 0x400>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_PIO>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; interrupt-controller; #interrupt-cells = <3>; i2c0_pins: i2c0 { - allwinner,pins = "PA11", "PA12"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA11", "PA12"; + function = "i2c0"; }; i2c1_pins: i2c1 { - allwinner,pins = "PA18", "PA19"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA18", "PA19"; + function = "i2c1"; }; i2c2_pins: i2c2 { - allwinner,pins = "PE12", "PE13"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PE12", "PE13"; + function = "i2c2"; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", "PF3", - "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; mmc0_cd_pin: mmc0_cd_pin@0 { - allwinner,pins = "PF6"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PF6"; + function = "gpio_in"; + bias-pull-up; }; mmc1_pins_a: mmc1@0 { - allwinner,pins = "PG0", "PG1", "PG2", "PG3", - "PG4", "PG5"; - allwinner,function = "mmc1"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG0", "PG1", "PG2", "PG3", + "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; }; mmc2_8bit_pins: mmc2_8bit { - allwinner,pins = "PC5", "PC6", "PC8", - "PC9", "PC10", "PC11", - "PC12", "PC13", "PC14", - "PC15", "PC16"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC5", "PC6", "PC8", + "PC9", "PC10", "PC11", + "PC12", "PC13", "PC14", + "PC15", "PC16"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + + spdif_tx_pins_a: spdif@0 { + pins = "PA17"; + function = "spdif"; + }; + + spi0_pins: spi0 { + pins = "PC0", "PC1", "PC2", "PC3"; + function = "spi0"; + }; + + spi1_pins: spi1 { + pins = "PA15", "PA16", "PA14", "PA13"; + function = "spi1"; }; uart0_pins_a: uart0@0 { - allwinner,pins = "PA4", "PA5"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA4", "PA5"; + function = "uart0"; }; uart1_pins: uart1 { - allwinner,pins = "PG6", "PG7"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG6", "PG7"; + function = "uart1"; }; uart1_rts_cts_pins: uart1_rts_cts { - allwinner,pins = "PG8", "PG9"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG8", "PG9"; + function = "uart1"; }; uart2_pins: uart2 { - allwinner,pins = "PA0", "PA1"; - allwinner,function = "uart2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA0", "PA1"; + function = "uart2"; }; uart3_pins: uart3 { - allwinner,pins = "PA13", "PA14"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA13", "PA14"; + function = "uart3"; }; }; @@ -425,12 +424,57 @@ clocks = <&osc24M>; }; + spi0: spi@01c68000 { + compatible = "allwinner,sun8i-h3-spi"; + reg = <0x01c68000 0x1000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; + clock-names = "ahb", "mod"; + dmas = <&dma 23>, <&dma 23>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@01c69000 { + compatible = "allwinner,sun8i-h3-spi"; + reg = <0x01c69000 0x1000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; + clock-names = "ahb", "mod"; + dmas = <&dma 24>, <&dma 24>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + resets = <&ccu RST_BUS_SPI1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + wdt0: watchdog@01c20ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; }; + spdif: spdif@01c21000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-h3-spdif"; + reg = <0x01c21000 0x400>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>; + resets = <&ccu RST_BUS_SPDIF>; + clock-names = "apb", "spdif"; + dmas = <&dma 2>; + dma-names = "tx"; + status = "disabled"; + }; + pwm: pwm@01c21400 { compatible = "allwinner,sun8i-h3-pwm"; reg = <0x01c21400 0x8>; @@ -439,6 +483,20 @@ status = "disabled"; }; + codec: codec@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-h3-codec"; + reg = <0x01c22c00 0x400>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; + clock-names = "apb", "codec"; + resets = <&ccu RST_BUS_CODEC>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "rx", "tx"; + allwinner,codec-analog-controls = <&codec_analog>; + status = "disabled"; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; @@ -533,7 +591,7 @@ gic: interrupt-controller@01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, - <0x01c82000 0x1000>, + <0x01c82000 0x2000>, <0x01c84000 0x2000>, <0x01c86000 0x2000>; interrupt-controller; @@ -554,6 +612,11 @@ #reset-cells = <1>; }; + codec_analog: codec-analog@01f015c0 { + compatible = "allwinner,sun8i-h3-codec-analog"; + reg = <0x01f015c0 0x4>; + }; + ir: ir@01f02000 { compatible = "allwinner,sun5i-a13-ir"; clocks = <&apb0_gates 1>, <&ir_clk>; @@ -568,7 +631,8 @@ compatible = "allwinner,sun8i-h3-r-pinctrl"; reg = <0x01f02c00 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 0>; + clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; resets = <&apb0_reset 0>; gpio-controller; #gpio-cells = <3>; @@ -576,10 +640,8 @@ #interrupt-cells = <3>; ir_pins_a: ir@0 { - allwinner,pins = "PL11"; - allwinner,function = "s_cir_rx"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL11"; + function = "s_cir_rx"; }; }; }; diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi index 29f837a47771..c676940a96da 100644 --- a/arch/arm/boot/dts/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -83,15 +83,14 @@ }; &mmc1_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &r_pio { wifi_pwrseq_pin_q8: wifi_pwrseq_pin@0 { - allwinner,pins = "PL6", "PL7", "PL11"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PL6", "PL7", "PL11"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/sun8i-r16-parrot.dts index 47553e522982..472c03b7aeab 100644 --- a/arch/arm/boot/dts/sun8i-r16-parrot.dts +++ b/arch/arm/boot/dts/sun8i-r16-parrot.dts @@ -84,6 +84,14 @@ }; +&codec { + status = "okay"; +}; + +&dai { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -149,8 +157,8 @@ }; &mmc2_8bit_pins { - allwinner,drive = <SUN4I_PINCTRL_40_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + drive-strength = <40>; + bias-pull-up; }; &ohci0 { @@ -159,40 +167,32 @@ &pio { mmc0_cd_pin_parrot: mmc0_cd_pin@0 { - allwinner,pins = "PD14"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PD14"; + function = "gpio_in"; + bias-pull-up; }; led_pins_parrot: led_pins@0 { - allwinner,pins = "PE16", "PE17"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PE16", "PE17"; + function = "gpio_out"; }; usb0_id_det: usb0_id_detect_pin@0 { - allwinner,pins = "PD10"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PD10"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_parrot: usb1_vbus_pin@0 { - allwinner,pins = "PD12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PD12"; + function = "gpio_out"; }; }; &r_pio { wifi_reset_pin_parrot: wifi_reset_pin@0 { - allwinner,pins = "PL6"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL6"; + function = "gpio_out"; }; }; @@ -209,7 +209,7 @@ }; }; -#include "axp22x.dtsi" +#include "axp223.dtsi" ®_aldo1 { regulator-always-on; @@ -325,6 +325,10 @@ status = "okay"; }; +&sound { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_b>; diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi index 08cd00143635..7097c18ff487 100644 --- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi @@ -94,31 +94,25 @@ &pio { bl_en_pin: bl_en_pin@0 { - allwinner,pins = "PH6"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH6"; + function = "gpio_in"; }; mmc0_cd_pin: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PB4"; + function = "gpio_in"; + bias-pull-up; }; ts_power_pin: ts_power_pin@0 { - allwinner,pins = "PH1"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH1"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH8"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH8"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -136,7 +130,7 @@ }; }; -#include "axp22x.dtsi" +#include "axp223.dtsi" ®_aldo1 { regulator-always-on; @@ -209,10 +203,21 @@ status = "okay"; }; +®_ldo_io1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-touchscreen"; + status = "okay"; +}; + ®_rtc_ldo { regulator-name = "vcc-rtc"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &r_uart { pinctrl-names = "default"; pinctrl-0 = <&r_uart_pins_a>; diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts new file mode 100644 index 000000000000..387fc2aa546d --- /dev/null +++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-v3s.dtsi" +#include "sunxi-common-regulators.dtsi" + +/ { + model = "Lichee Pi Zero"; + compatible = "licheepi,licheepi-zero", "allwinner,sun8i-v3s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + blue_led { + label = "licheepi:blue:usr"; + gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ + }; + + green_led { + label = "licheepi:green:usr"; + gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ + default-state = "on"; + }; + + red_led { + label = "licheepi:red:usr"; + gpios = <&pio 6 2 GPIO_ACTIVE_LOW>; /* PG2 */ + }; + }; +}; + +&mmc0 { + pinctrl-0 = <&mmc0_pins_a>; + pinctrl-names = "default"; + broken-cd; + bus-width = <4>; + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpio = <&pio 5 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi new file mode 100644 index 000000000000..71075969e5e6 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -0,0 +1,309 @@ +/* + * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + clocks = <&ccu 14>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun7i-a20-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ccu 22>, + <&ccu 45>, + <&ccu 47>, + <&ccu 46>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ccu 7>; + reset-names = "ahb"; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun7i-a20-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ccu 23>, + <&ccu 48>, + <&ccu 50>, + <&ccu 49>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ccu 8>; + reset-names = "ahb"; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun7i-a20-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ccu 24>, + <&ccu 51>, + <&ccu 53>, + <&ccu 52>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ccu 9>; + reset-names = "ahb"; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + usb_otg: usb@01c19000 { + compatible = "allwinner,sun8i-h3-musb"; + reg = <0x01c19000 0x0400>; + clocks = <&ccu 29>; + resets = <&ccu 17>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + status = "disabled"; + }; + + usbphy: phy@01c19400 { + compatible = "allwinner,sun8i-v3s-usb-phy"; + reg = <0x01c19400 0x2c>, + <0x01c1a800 0x4>; + reg-names = "phy_ctrl", + "pmu0"; + clocks = <&ccu 56>; + clock-names = "usb0_phy"; + resets = <&ccu 0>; + reset-names = "usb0_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + + ccu: clock@01c20000 { + compatible = "allwinner,sun8i-v3s-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + rtc: rtc@01c20400 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01c20400 0x54>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + }; + + pio: pinctrl@01c20800 { + compatible = "allwinner,sun8i-v3s-pinctrl"; + reg = <0x01c20800 0x400>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu 37>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + i2c0_pins: i2c0 { + pins = "PB6", "PB7"; + function = "i2c0"; + }; + + uart0_pins_a: uart0@0 { + pins = "PB8", "PB9"; + function = "uart0"; + }; + + mmc0_pins_a: mmc0@0 { + pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; + }; + }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0xa0>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; + }; + + wdt0: watchdog@01c20ca0 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x01c20ca0 0x20>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 40>; + resets = <&ccu 49>; + status = "disabled"; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 41>; + resets = <&ccu 50>; + status = "disabled"; + }; + + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 42>; + resets = <&ccu 51>; + status = "disabled"; + }; + + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu 38>; + resets = <&ccu 46>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu 39>; + resets = <&ccu 47>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gic: interrupt-controller@01c81000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x1000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index 439847acd41e..9112a200fd5e 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -76,6 +76,14 @@ gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ }; }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&ac100_rtc 1>; + clock-names = "ext_clock"; + /* enables internal regulator and de-asserts reset */ + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */ + }; }; &mmc0 { @@ -88,6 +96,21 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>, <&wifi_en_pin_cubieboard4>; + vmmc-supply = <®_dldo1>; + vqmmc-supply = <®_cldo3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&mmc1_pins { + bias-pull-up; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_pins>; @@ -100,7 +123,7 @@ &mmc2_8bit_pins { /* Increase drive strength for DDR modes */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; + drive-strength = <40>; }; &osc32k { @@ -110,17 +133,14 @@ &pio { led_pins_cubieboard4: led-pins@0 { - allwinner,pins = "PH6", "PH17"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH6", "PH17"; + function = "gpio_out"; }; mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 { - allwinner,pins = "PH18"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH18"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -128,6 +148,13 @@ status = "okay"; }; +&r_pio { + wifi_en_pin_cubieboard4: wifi_en_pin@0 { + pins = "PL2"; + function = "gpio_out"; + }; +}; + &r_rsb { status = "okay"; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index ceb6ef15d669..0fc3a87f5576 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -105,6 +105,14 @@ enable-active-high; gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&ac100_rtc 1>; + clock-names = "ext_clock"; + /* enables internal regulator and de-asserts reset */ + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */ + }; }; &ehci0 { @@ -130,6 +138,21 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>, <&wifi_en_pin_optimus>; + vmmc-supply = <®_dldo1>; + vqmmc-supply = <®_cldo3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&mmc1_pins { + bias-pull-up; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_pins>; @@ -142,7 +165,7 @@ &mmc2_8bit_pins { /* Increase drive strength for DDR modes */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; + drive-strength = <40>; }; &ohci0 { @@ -160,31 +183,24 @@ &pio { led_pins_optimus: led-pins@0 { - allwinner,pins = "PH0", "PH1"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH0", "PH1"; + function = "gpio_out"; }; mmc0_cd_pin_optimus: mmc0_cd_pin@0 { - allwinner,pins = "PH18"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH18"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_optimus: usb1_vbus_pin@1 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH4"; + function = "gpio_out"; }; usb3_vbus_pin_optimus: usb3_vbus_pin@1 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH5"; + function = "gpio_out"; }; }; @@ -194,10 +210,13 @@ &r_pio { led_r_pins_optimus: led-pins@1 { - allwinner,pins = "PM15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PM15"; + function = "gpio_out"; + }; + + wifi_en_pin_optimus: wifi_en_pin@0 { + pins = "PL2"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 3c5214cbe4e6..15b6d122f878 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -48,6 +48,13 @@ #include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/clock/sun9i-a80-ccu.h> +#include <dt-bindings/clock/sun9i-a80-de.h> +#include <dt-bindings/clock/sun9i-a80-usb.h> +#include <dt-bindings/reset/sun9i-a80-ccu.h> +#include <dt-bindings/reset/sun9i-a80-de.h> +#include <dt-bindings/reset/sun9i-a80-usb.h> + / { interrupt-parent = <&gic>; @@ -159,228 +166,13 @@ clock-output-names = "osc32k"; }; - usb_mod_clk: clk@00a08000 { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun9i-a80-usb-mod-clk"; - reg = <0x00a08000 0x4>; - clocks = <&ahb1_gates 1>; - clock-output-names = "usb0_ahb", "usb_ohci0", - "usb1_ahb", "usb_ohci1", - "usb2_ahb", "usb_ohci2"; - }; - - usb_phy_clk: clk@00a08004 { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun9i-a80-usb-phy-clk"; - reg = <0x00a08004 0x4>; - clocks = <&ahb1_gates 1>; - clock-output-names = "usb_phy0", "usb_hsic1_480M", - "usb_phy1", "usb_hsic2_480M", - "usb_phy2", "usb_hsic_12M"; - }; - - pll3: clk@06000008 { - /* placeholder until implemented */ - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-rate = <0>; - clock-output-names = "pll3"; - }; - - pll4: clk@0600000c { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-pll4-clk"; - reg = <0x0600000c 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll4"; - }; - - pll12: clk@0600002c { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-pll4-clk"; - reg = <0x0600002c 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll12"; - }; - - gt_clk: clk@0600005c { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-gt-clk"; - reg = <0x0600005c 0x4>; - clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>; - clock-output-names = "gt"; - }; - - ahb0: clk@06000060 { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-ahb-clk"; - reg = <0x06000060 0x4>; - clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>; - clock-output-names = "ahb0"; - }; - - ahb1: clk@06000064 { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-ahb-clk"; - reg = <0x06000064 0x4>; - clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>; - clock-output-names = "ahb1"; - }; - - ahb2: clk@06000068 { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-ahb-clk"; - reg = <0x06000068 0x4>; - clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>; - clock-output-names = "ahb2"; - }; - - apb0: clk@06000070 { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-apb0-clk"; - reg = <0x06000070 0x4>; - clocks = <&osc24M>, <&pll4>; - clock-output-names = "apb0"; - }; - - apb1: clk@06000074 { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-apb1-clk"; - reg = <0x06000074 0x4>; - clocks = <&osc24M>, <&pll4>; - clock-output-names = "apb1"; - }; - - cci400_clk: clk@06000078 { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-gt-clk"; - reg = <0x06000078 0x4>; - clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>; - clock-output-names = "cci400"; - }; - - mmc0_clk: clk@06000410 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-mmc-clk"; - reg = <0x06000410 0x4>; - clocks = <&osc24M>, <&pll4>; - clock-output-names = "mmc0", "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@06000414 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-mmc-clk"; - reg = <0x06000414 0x4>; - clocks = <&osc24M>, <&pll4>; - clock-output-names = "mmc1", "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@06000418 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-mmc-clk"; - reg = <0x06000418 0x4>; - clocks = <&osc24M>, <&pll4>; - clock-output-names = "mmc2", "mmc2_output", - "mmc2_sample"; - }; - - mmc3_clk: clk@0600041c { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-mmc-clk"; - reg = <0x0600041c 0x4>; - clocks = <&osc24M>, <&pll4>; - clock-output-names = "mmc3", "mmc3_output", - "mmc3_sample"; - }; - - ahb0_gates: clk@06000580 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-ahb0-gates-clk"; - reg = <0x06000580 0x4>; - clocks = <&ahb0>; - clock-indices = <0>, <1>, <3>, - <5>, <8>, <12>, - <13>, <14>, - <15>, <16>, <18>, - <20>, <21>, <22>, - <23>; - clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu", - "ahb0_ss", "ahb0_sd", "ahb0_nand1", - "ahb0_nand0", "ahb0_sdram", - "ahb0_mipi_hsi", "ahb0_sata", "ahb0_ts", - "ahb0_spi0", "ahb0_spi1", "ahb0_spi2", - "ahb0_spi3"; - }; - - ahb1_gates: clk@06000584 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-ahb1-gates-clk"; - reg = <0x06000584 0x4>; - clocks = <&ahb1>; - clock-indices = <0>, <1>, - <17>, <21>, - <22>, <23>, - <24>; - clock-output-names = "ahb1_usbotg", "ahb1_usbhci", - "ahb1_gmac", "ahb1_msgbox", - "ahb1_spinlock", "ahb1_hstimer", - "ahb1_dma"; - }; - - ahb2_gates: clk@06000588 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-ahb2-gates-clk"; - reg = <0x06000588 0x4>; - clocks = <&ahb2>; - clock-indices = <0>, <1>, - <2>, <4>, <5>, - <7>, <8>, <11>; - clock-output-names = "ahb2_lcd0", "ahb2_lcd1", - "ahb2_edp", "ahb2_csi", "ahb2_hdmi", - "ahb2_de", "ahb2_mp", "ahb2_mipi_dsi"; - }; - - apb0_gates: clk@06000590 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-apb0-gates-clk"; - reg = <0x06000590 0x4>; - clocks = <&apb0>; - clock-indices = <1>, <5>, - <11>, <12>, <13>, - <15>, <17>, <18>, - <19>; - clock-output-names = "apb0_spdif", "apb0_pio", - "apb0_ac97", "apb0_i2s0", "apb0_i2s1", - "apb0_lradc", "apb0_gpadc", "apb0_twd", - "apb0_cirtx"; - }; - - apb1_gates: clk@06000594 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-apb1-gates-clk"; - reg = <0x06000594 0x4>; - clocks = <&apb1>; - clock-indices = <0>, <1>, - <2>, <3>, <4>, - <16>, <17>, - <18>, <19>, - <20>, <21>; - clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_i2c3", "apb1_i2c4", - "apb1_uart0", "apb1_uart1", - "apb1_uart2", "apb1_uart3", - "apb1_uart4", "apb1_uart5"; - }; - cpus_clk: clk@08001410 { compatible = "allwinner,sun9i-a80-cpus-clk"; reg = <0x08001410 0x4>; #clock-cells = <0>; - clocks = <&osc32k>, <&osc24M>, <&pll4>, <&pll3>; + clocks = <&osc32k>, <&osc24M>, + <&ccu CLK_PLL_PERIPH0>, + <&ccu CLK_PLL_AUDIO>; clock-output-names = "cpus"; }; @@ -453,8 +245,8 @@ compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; reg = <0x00a00000 0x100>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usb_mod_clk 1>; - resets = <&usb_mod_clk 17>; + clocks = <&usb_clocks CLK_BUS_HCI0>; + resets = <&usb_clocks RST_USB0_HCI>; phys = <&usbphy1>; phy-names = "usb"; status = "disabled"; @@ -464,8 +256,9 @@ compatible = "allwinner,sun9i-a80-ohci", "generic-ohci"; reg = <0x00a00400 0x100>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usb_mod_clk 1>, <&usb_mod_clk 2>; - resets = <&usb_mod_clk 17>; + clocks = <&usb_clocks CLK_BUS_HCI0>, + <&usb_clocks CLK_USB_OHCI0>; + resets = <&usb_clocks RST_USB0_HCI>; phys = <&usbphy1>; phy-names = "usb"; status = "disabled"; @@ -474,9 +267,9 @@ usbphy1: phy@00a00800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a00800 0x4>; - clocks = <&usb_phy_clk 1>; + clocks = <&usb_clocks CLK_USB0_PHY>; clock-names = "phy"; - resets = <&usb_phy_clk 17>; + resets = <&usb_clocks RST_USB0_PHY>; reset-names = "phy"; status = "disabled"; #phy-cells = <0>; @@ -486,8 +279,8 @@ compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; reg = <0x00a01000 0x100>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usb_mod_clk 3>; - resets = <&usb_mod_clk 18>; + clocks = <&usb_clocks CLK_BUS_HCI1>; + resets = <&usb_clocks RST_USB1_HCI>; phys = <&usbphy2>; phy-names = "usb"; status = "disabled"; @@ -496,11 +289,16 @@ usbphy2: phy@00a01800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a01800 0x4>; - clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>, - <&usb_phy_clk 3>; - clock-names = "hsic_480M", "hsic_12M", "phy"; - resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>; - reset-names = "hsic", "phy"; + clocks = <&usb_clocks CLK_USB1_HSIC>, + <&usb_clocks CLK_USB_HSIC>, + <&usb_clocks CLK_USB1_PHY>; + clock-names = "hsic_480M", + "hsic_12M", + "phy"; + resets = <&usb_clocks RST_USB1_HSIC>, + <&usb_clocks RST_USB1_PHY>; + reset-names = "hsic", + "phy"; status = "disabled"; #phy-cells = <0>; /* usb1 is always used with HSIC */ @@ -511,8 +309,8 @@ compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; reg = <0x00a02000 0x100>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usb_mod_clk 5>; - resets = <&usb_mod_clk 19>; + clocks = <&usb_clocks CLK_BUS_HCI2>; + resets = <&usb_clocks RST_USB2_HCI>; phys = <&usbphy3>; phy-names = "usb"; status = "disabled"; @@ -522,8 +320,9 @@ compatible = "allwinner,sun9i-a80-ohci", "generic-ohci"; reg = <0x00a02400 0x100>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usb_mod_clk 5>, <&usb_mod_clk 6>; - resets = <&usb_mod_clk 19>; + clocks = <&usb_clocks CLK_BUS_HCI2>, + <&usb_clocks CLK_USB_OHCI2>; + resets = <&usb_clocks RST_USB2_HCI>; phys = <&usbphy3>; phy-names = "usb"; status = "disabled"; @@ -532,20 +331,35 @@ usbphy3: phy@00a02800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a02800 0x4>; - clocks = <&usb_phy_clk 4>, <&usb_phy_clk 10>, - <&usb_phy_clk 5>; - clock-names = "hsic_480M", "hsic_12M", "phy"; - resets = <&usb_phy_clk 20>, <&usb_phy_clk 21>; - reset-names = "hsic", "phy"; + clocks = <&usb_clocks CLK_USB2_HSIC>, + <&usb_clocks CLK_USB_HSIC>, + <&usb_clocks CLK_USB2_PHY>; + clock-names = "hsic_480M", + "hsic_12M", + "phy"; + resets = <&usb_clocks RST_USB2_HSIC>, + <&usb_clocks RST_USB2_PHY>; + reset-names = "hsic", + "phy"; status = "disabled"; #phy-cells = <0>; }; + usb_clocks: clock@00a08000 { + compatible = "allwinner,sun9i-a80-usb-clks"; + reg = <0x00a08000 0x8>; + clocks = <&ccu CLK_BUS_USB>, <&osc24M>; + clock-names = "bus", "hosc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + mmc0: mmc@01c0f000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>, - <&mmc0_clk 1>, <&mmc0_clk 2>; + clocks = <&mmc_config_clk 0>, <&ccu CLK_MMC0>, + <&ccu CLK_MMC0_OUTPUT>, + <&ccu CLK_MMC0_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; resets = <&mmc_config_clk 0>; reset-names = "ahb"; @@ -558,8 +372,9 @@ mmc1: mmc@01c10000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>, - <&mmc1_clk 1>, <&mmc1_clk 2>; + clocks = <&mmc_config_clk 1>, <&ccu CLK_MMC1>, + <&ccu CLK_MMC1_OUTPUT>, + <&ccu CLK_MMC1_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; resets = <&mmc_config_clk 1>; reset-names = "ahb"; @@ -572,8 +387,9 @@ mmc2: mmc@01c11000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>, - <&mmc2_clk 1>, <&mmc2_clk 2>; + clocks = <&mmc_config_clk 2>, <&ccu CLK_MMC2>, + <&ccu CLK_MMC2_OUTPUT>, + <&ccu CLK_MMC2_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; resets = <&mmc_config_clk 2>; reset-names = "ahb"; @@ -586,8 +402,9 @@ mmc3: mmc@01c12000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c12000 0x1000>; - clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>, - <&mmc3_clk 1>, <&mmc3_clk 2>; + clocks = <&mmc_config_clk 3>, <&ccu CLK_MMC3>, + <&ccu CLK_MMC3_OUTPUT>, + <&ccu CLK_MMC3_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; resets = <&mmc_config_clk 3>; reset-names = "ahb"; @@ -600,9 +417,9 @@ mmc_config_clk: clk@01c13000 { compatible = "allwinner,sun9i-a80-mmc-config-clk"; reg = <0x01c13000 0x10>; - clocks = <&ahb0_gates 8>; + clocks = <&ccu CLK_BUS_MMC>; clock-names = "ahb"; - resets = <&ahb0_resets 8>; + resets = <&ccu RST_BUS_MMC>; reset-names = "ahb"; #clock-cells = <1>; #reset-cells = <1>; @@ -613,7 +430,7 @@ gic: interrupt-controller@01c41000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c41000 0x1000>, - <0x01c42000 0x1000>, + <0x01c42000 0x2000>, <0x01c44000 0x2000>, <0x01c46000 0x2000>; interrupt-controller; @@ -621,34 +438,27 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; - ahb0_resets: reset@060005a0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x060005a0 0x4>; - }; - - ahb1_resets: reset@060005a4 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x060005a4 0x4>; - }; - - ahb2_resets: reset@060005a8 { + de_clocks: clock@03000000 { + compatible = "allwinner,sun9i-a80-de-clks"; + reg = <0x03000000 0x30>; + clocks = <&ccu CLK_DE>, + <&ccu CLK_SDRAM>, + <&ccu CLK_BUS_DE>; + clock-names = "mod", + "dram", + "bus"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x060005a8 0x4>; }; - apb0_resets: reset@060005b0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x060005b0 0x4>; - }; - - apb1_resets: reset@060005b4 { + ccu: clock@06000000 { + compatible = "allwinner,sun9i-a80-ccu"; + reg = <0x06000000 0x800>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x060005b4 0x4>; }; timer@06000c00 { @@ -678,7 +488,8 @@ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 5>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; @@ -686,42 +497,44 @@ #gpio-cells = <3>; i2c3_pins_a: i2c3@0 { - allwinner,pins = "PG10", "PG11"; - allwinner,function = "i2c3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG10", "PG11"; + function = "i2c3"; }; mmc0_pins: mmc0 { - allwinner,pins = "PF0", "PF1" ,"PF2", "PF3", - "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF0", "PF1" ,"PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc1_pins: mmc1 { + pins = "PG0", "PG1" ,"PG2", "PG3", + "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; }; mmc2_8bit_pins: mmc2_8bit { - allwinner,pins = "PC6", "PC7", "PC8", "PC9", - "PC10", "PC11", "PC12", - "PC13", "PC14", "PC15", - "PC16"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", + "PC13", "PC14", "PC15", + "PC16"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; }; uart0_pins_a: uart0@0 { - allwinner,pins = "PH12", "PH13"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH12", "PH13"; + function = "uart0"; }; uart4_pins_a: uart4@0 { - allwinner,pins = "PG12", "PG13", "PG14", "PG15"; - allwinner,function = "uart4"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG12", "PG13", "PG14", "PG15"; + function = "uart4"; }; }; @@ -731,8 +544,8 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 16>; - resets = <&apb1_resets 16>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; @@ -742,8 +555,8 @@ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 17>; - resets = <&apb1_resets 17>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; status = "disabled"; }; @@ -753,8 +566,8 @@ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 18>; - resets = <&apb1_resets 18>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; status = "disabled"; }; @@ -764,8 +577,8 @@ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 19>; - resets = <&apb1_resets 19>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; status = "disabled"; }; @@ -775,8 +588,8 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 20>; - resets = <&apb1_resets 20>; + clocks = <&ccu CLK_BUS_UART4>; + resets = <&ccu RST_BUS_UART4>; status = "disabled"; }; @@ -786,8 +599,8 @@ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 21>; - resets = <&apb1_resets 21>; + clocks = <&ccu CLK_BUS_UART5>; + resets = <&ccu RST_BUS_UART5>; status = "disabled"; }; @@ -795,8 +608,8 @@ compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07002800 0x400>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb1_gates 0>; - resets = <&apb1_resets 0>; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -806,8 +619,8 @@ compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07002c00 0x400>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb1_gates 1>; - resets = <&apb1_resets 1>; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -817,8 +630,8 @@ compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07003000 0x400>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb1_gates 2>; - resets = <&apb1_resets 2>; + clocks = <&ccu CLK_BUS_I2C2>; + resets = <&ccu RST_BUS_I2C2>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -828,8 +641,8 @@ compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07003400 0x400>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb1_gates 3>; - resets = <&apb1_resets 3>; + clocks = <&ccu CLK_BUS_I2C3>; + resets = <&ccu RST_BUS_I2C3>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -839,8 +652,8 @@ compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07003800 0x400>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb1_gates 4>; - resets = <&apb1_resets 4>; + clocks = <&ccu CLK_BUS_I2C4>; + resets = <&ccu RST_BUS_I2C4>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -894,7 +707,8 @@ reg = <0x08002c00 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apbs_gates 0>; + clocks = <&apbs_gates 0>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; resets = <&apbs_rst 0>; gpio-controller; interrupt-controller; @@ -902,17 +716,15 @@ #gpio-cells = <3>; r_ir_pins: r_ir { - allwinner,pins = "PL6"; - allwinner,function = "s_cir_rx"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL6"; + function = "s_cir_rx"; }; r_rsb_pins: r_rsb { - allwinner,pins = "PN0", "PN1"; - allwinner,function = "s_rsb"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PN0", "PN1"; + function = "s_rsb"; + drive-strength = <20>; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index f1953b0c5059..17c09fed9e84 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -47,31 +47,23 @@ &pio { ahci_pwr_pin_a: ahci_pwr_pin@0 { - allwinner,pins = "PB8"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB8"; + function = "gpio_out"; }; usb0_vbus_pin_a: usb0_vbus_pin@0 { - allwinner,pins = "PB9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB9"; + function = "gpio_out"; }; usb1_vbus_pin_a: usb1_vbus_pin@0 { - allwinner,pins = "PH6"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH6"; + function = "gpio_out"; }; usb2_vbus_pin_a: usb2_vbus_pin@0 { - allwinner,pins = "PH3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH3"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/tango4-common.dtsi b/arch/arm/boot/dts/tango4-common.dtsi index dd7eb5f624d9..0c8cad4d6ee6 100644 --- a/arch/arm/boot/dts/tango4-common.dtsi +++ b/arch/arm/boot/dts/tango4-common.dtsi @@ -97,6 +97,52 @@ clocks = <&xtal>; }; + mmc0: mmc@21000 { + compatible = "arasan,sdhci-8.9a"; + reg = <0x21000 0x200>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&clkgen SDIO_CLK>, <&clkgen SYS_CLK>; + interrupts = <60 IRQ_TYPE_LEVEL_HIGH>; + }; + + mmc1: mmc@21200 { + compatible = "arasan,sdhci-8.9a"; + reg = <0x21200 0x200>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&clkgen SDIO_CLK>, <&clkgen SYS_CLK>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + }; + + usb0: usb@21400 { + compatible = "chipidea,usb2"; + reg = <0x21400 0x200>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb0_phy>; + phy-names = "usb-phy"; + }; + + usb0_phy: phy@21700 { + compatible = "sigma,smp8642-usb-phy"; + reg = <0x21700 0x100>; + #phy-cells = <0>; + clocks = <&clkgen USB_CLK>; + }; + + usb1: usb@25400 { + compatible = "chipidea,usb2"; + reg = <0x25400 0x200>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb1_phy>; + phy-names = "usb-phy"; + }; + + usb1_phy: phy@25700 { + compatible = "sigma,smp8642-usb-phy"; + reg = <0x25700 0x100>; + #phy-cells = <0>; + clocks = <&clkgen USB_CLK>; + }; + eth0: ethernet@26000 { compatible = "sigma,smp8734-ethernet"; reg = <0x26000 0x800>; diff --git a/arch/arm/boot/dts/tango4-vantage-1172.dts b/arch/arm/boot/dts/tango4-vantage-1172.dts index 4cab64cb581e..86d8df98802f 100644 --- a/arch/arm/boot/dts/tango4-vantage-1172.dts +++ b/arch/arm/boot/dts/tango4-vantage-1172.dts @@ -8,6 +8,7 @@ aliases { serial = &uart; + eth0 = ð0; }; memory@80000000 { @@ -34,3 +35,7 @@ reg = <4>; }; }; + +&mmc1 { + non-removable; /* eMMC */ +}; diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts index 653044a44f0d..5b860ad5cbee 100644 --- a/arch/arm/boot/dts/tegra124-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts @@ -187,14 +187,8 @@ /* Apalis SD1 */ sdhci@700b0400 { status = "okay"; - /* - * Don't use SD1_CD# aka SDMMC3_CLK_LB_OUT for now as it - * features some magic properties even though the external - * loopback is disabled and the internal loopback used as per - * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits being - * set to 0xfffd according to the TRM! - * cd-gpios = <&gpio TEGRA_GPIO(EE, 4) GPIO_ACTIVE_LOW>; - */ + /* SD1_CD# */ + cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; bus-width = <4>; vqmmc-supply = <&vddio_sdmmc3>; }; diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi index e7a73db17613..f9e623bdd5c3 100644 --- a/arch/arm/boot/dts/tegra124-apalis.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis.dtsi @@ -44,7 +44,7 @@ /* * Toradex Apalis TK1 Module Device Tree - * Compatible for Revisions 2GB: V1.0A + * Compatible for Revisions 2GB: V1.0A, V1.0B, V1.1A */ / { model = "Toradex Apalis TK1"; @@ -257,7 +257,7 @@ }; dp_hpd_pff0 { nvidia,pins = "dp_hpd_pff0"; - nvidia,function = "rsvd2"; + nvidia,function = "dp"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; @@ -416,18 +416,10 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - /* - * Don't use MMC1_D6 aka SDMMC3_CLK_LB_IN for now as it - * features some magic properties even though the - * external loopback is disabled and the internal - * loopback used as per SDMMC_VENDOR_MISC_CNTRL_0 - * register's SDMMC_SPARE1 bits being set to 0xfffd - * according to the TRM! - */ sdmmc3_clk_lb_in_pee5 { /* D6 GPIO */ nvidia,pins = "sdmmc3_clk_lb_in_pee5"; - nvidia,function = "sdmmc3"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; @@ -522,20 +514,12 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - /* - * Don't use SD1_CD# aka SDMMC3_CLK_LB_OUT for now as it - * features some magic properties even though the - * external loopback is disabled and the internal - * loopback used as per SDMMC_VENDOR_MISC_CNTRL_0 - * register's SDMMC_SPARE1 bits being set to 0xfffd - * according to the TRM! - */ - sdmmc3_clk_lb_out_pee4 { /* CD# GPIO */ - nvidia,pins = "sdmmc3_clk_lb_out_pee4"; - nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; + sdmmc3_cd_n_pv2 { /* CD# GPIO */ + nvidia,pins = "sdmmc3_cd_n_pv2"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; /* Apalis SPDIF */ @@ -1153,11 +1137,11 @@ nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - /* GPIO_PI6 aka TEMP_ALERT_L */ + /* GPIO_PI6 aka TMP451 ALERT#/THERM2# */ pi6 { nvidia,pins = "pi6"; nvidia,function = "rsvd1"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; @@ -1514,13 +1498,6 @@ nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - sdmmc3_cd_n_pv2 { /* NC */ - nvidia,pins = "sdmmc3_cd_n_pv2"; - nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; - }; gpio_x1_aud_px1 { /* NC */ nvidia,pins = "gpio_x1_aud_px1"; nvidia,function = "rsvd2"; @@ -1570,6 +1547,22 @@ nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; + /* + * Leave SDMMC3_CLK_LB_OUT muxed as SDMMC3 with output + * driver enabled aka not tristated and input driver + * enabled as well as it features some magic properties + * even though the external loopback is disabled and the + * internal loopback used as per + * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 + * bits being set to 0xfffd according to the TRM! + */ + sdmmc3_clk_lb_out_pee4 { /* NC */ + nvidia,pins = "sdmmc3_clk_lb_out_pee4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; }; }; @@ -1595,7 +1588,7 @@ clock-frequency = <400000>; /* SGTL5000 audio codec */ - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; VDDA-supply = <®_3v3>; diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts index 67d7cfb32541..12eb7809d9ab 100644 --- a/arch/arm/boot/dts/tegra124-nyan-big.dts +++ b/arch/arm/boot/dts/tegra124-nyan-big.dts @@ -6,7 +6,11 @@ / { model = "Acer Chromebook 13 CB5-311"; - compatible = "google,nyan-big", "nvidia,tegra124"; + compatible = "google,nyan-big-rev7", "google,nyan-big-rev6", + "google,nyan-big-rev5", "google,nyan-big-rev4", + "google,nyan-big-rev3", "google,nyan-big-rev2", + "google,nyan-big-rev1", "google,nyan-big-rev0", + "google,nyan-big", "google,nyan", "nvidia,tegra124"; panel: panel { compatible = "auo,b133xtn01"; @@ -1098,19 +1102,19 @@ }; cam_i2c_scl_pbb1 { nvidia,pins = "cam_i2c_scl_pbb1"; - nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; - nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; cam_i2c_sda_pbb2 { nvidia,pins = "cam_i2c_sda_pbb2"; - nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; - nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; pbb3 { nvidia,pins = "pbb3"; diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze.dts b/arch/arm/boot/dts/tegra124-nyan-blaze.dts index c9582361c26e..1078a73d5092 100644 --- a/arch/arm/boot/dts/tegra124-nyan-blaze.dts +++ b/arch/arm/boot/dts/tegra124-nyan-blaze.dts @@ -6,7 +6,13 @@ / { model = "HP Chromebook 14"; - compatible = "google,nyan-blaze", "google,nyan", "nvidia,tegra124"; + compatible = "google,nyan-blaze-rev10", "google,nyan-blaze-rev9", + "google,nyan-blaze-rev8", "google,nyan-blaze-rev7", + "google,nyan-blaze-rev6", "google,nyan-blaze-rev5", + "google,nyan-blaze-rev4", "google,nyan-blaze-rev3", + "google,nyan-blaze-rev2", "google,nyan-blaze-rev1", + "google,nyan-blaze-rev0", "google,nyan-blaze", + "google,nyan", "nvidia,tegra124"; panel: panel { compatible = "samsung,ltn140at29-301"; @@ -1094,19 +1100,19 @@ }; cam_i2c_scl_pbb1 { nvidia,pins = "cam_i2c_scl_pbb1"; - nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; - nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; cam_i2c_sda_pbb2 { nvidia,pins = "cam_i2c_sda_pbb2"; - nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; - nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; pbb3 { nvidia,pins = "pbb3"; diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index 271505e0715f..5cf987b5401e 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -42,6 +42,12 @@ }; }; + gpu@0,57000000 { + status = "okay"; + + vdd-supply = <&vdd_gpu>; + }; + serial@70006000 { /* Debug connector on the bottom of the board near SD card. */ status = "okay"; @@ -59,7 +65,7 @@ compatible = "maxim,max98090"; reg = <0x10>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; + interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>; }; temperature-sensor@4c { @@ -214,7 +220,7 @@ regulator-always-on; }; - sd6 { + vdd_gpu: sd6 { regulator-name = "+VDD_GPU_AP"; regulator-min-microvolt = <650000>; regulator-max-microvolt = <1200000>; @@ -325,10 +331,11 @@ reg = <0x9>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(J, 0) - GPIO_ACTIVE_HIGH>; + IRQ_TYPE_EDGE_BOTH>; ti,ac-detect-gpios = <&gpio TEGRA_GPIO(J, 0) GPIO_ACTIVE_HIGH>; + ti,external-control; }; battery: sbs-battery@b { diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 4e361a8c167e..b4bfa5586c23 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -569,6 +569,7 @@ regulator-name = "+3VS,vdd_pnl"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-boot-on; gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>; enable-active-high; }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 381747f114a9..87b07fbadbbe 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -366,6 +366,7 @@ sdhci@c8000000 { status = "okay"; + broken-cd; bus-width = <4>; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 2207c08e3fa3..e8807503f87c 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -376,6 +376,19 @@ status = "disabled"; }; + gmi@70009000 { + compatible = "nvidia,tegra20-gmi"; + reg = <0x70009000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xd0000000 0xfffffff>; + clocks = <&tegra_car TEGRA20_CLK_NOR>; + clock-names = "gmi"; + resets = <&tegra_car 42>; + reset-names = "gmi"; + status = "disabled"; + }; + pwm: pwm@7000a000 { compatible = "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index 192b95177aac..f6c7c3e958ac 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -48,6 +48,24 @@ pinctrl-0 = <&state_default>; state_default: pinmux { + /* Analogue Audio (On-module) */ + clk1_out_pw4 { + nvidia,pins = "clk1_out_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_fs_pp0 { + nvidia,pins = "dap3_fs_pp0", + "dap3_sclk_pp3", + "dap3_din_pp1", + "dap3_dout_pp2"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + /* Apalis BKL1_ON */ pv2 { nvidia,pins = "pv2"; @@ -429,6 +447,15 @@ status = "okay"; clock-frequency = <100000>; + /* SGTL5000 audio codec */ + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <&sys_3v3_reg>; + VDDIO-supply = <&sys_3v3_reg>; + clocks = <&tegra_car TEGRA30_CLK_EXTERN1>; + }; + pmic: tps65911@2d { compatible = "ti,tps65911"; reg = <0x2d>; @@ -660,6 +687,12 @@ nvidia,sys-clock-req-active-high; }; + ahub@70080000 { + i2s@70080500 { + status = "okay"; + }; + }; + /* eMMC */ sdhci@78000600 { status = "okay"; @@ -733,4 +766,20 @@ regulator-always-on; }; }; + + sound { + compatible = "toradex,tegra-audio-sgtl5000-apalis_t30", + "nvidia,tegra-audio-sgtl5000"; + nvidia,model = "Toradex Apalis T30"; + nvidia,audio-routing = + "Headphone Jack", "HP_OUT", + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack"; + nvidia,i2s-controller = <&tegra_i2s2>; + nvidia,audio-codec = <&sgtl5000>; + clocks = <&tegra_car TEGRA30_CLK_PLL_A>, + <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + }; }; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index a265534cd314..5360d638eedc 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -29,6 +29,24 @@ pinctrl-0 = <&state_default>; state_default: pinmux { + /* Analogue Audio (On-module) */ + clk1_out_pw4 { + nvidia,pins = "clk1_out_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_fs_pp0 { + nvidia,pins = "dap3_fs_pp0", + "dap3_sclk_pp3", + "dap3_din_pp1", + "dap3_dout_pp2"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + /* Colibri BL_ON */ pv2 { nvidia,pins = "pv2"; @@ -207,6 +225,15 @@ status = "okay"; clock-frequency = <100000>; + /* SGTL5000 audio codec */ + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <&sys_3v3_reg>; + VDDIO-supply = <&sys_3v3_reg>; + clocks = <&tegra_car TEGRA30_CLK_EXTERN1>; + }; + pmic: tps65911@2d { compatible = "ti,tps65911"; reg = <0x2d>; @@ -396,6 +423,12 @@ nvidia,sys-clock-req-active-high; }; + ahub@70080000 { + i2s@70080500 { + status = "okay"; + }; + }; + /* eMMC */ sdhci@78000600 { status = "okay"; @@ -471,4 +504,20 @@ regulator-always-on; }; }; + + sound { + compatible = "toradex,tegra-audio-sgtl5000-colibri_t30", + "nvidia,tegra-audio-sgtl5000"; + nvidia,model = "Toradex Colibri T30"; + nvidia,audio-routing = + "Headphone Jack", "HP_OUT", + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack"; + nvidia,i2s-controller = <&tegra_i2s2>; + nvidia,audio-codec = <&sgtl5000>; + clocks = <&tegra_car TEGRA30_CLK_PLL_A>, + <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + }; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 5030065cbdfe..bbb1c002e7f1 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -439,6 +439,19 @@ status = "disabled"; }; + gmi@70009000 { + compatible = "nvidia,tegra30-gmi"; + reg = <0x70009000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x48000000 0x7ffffff>; + clocks = <&tegra_car TEGRA30_CLK_NOR>; + clock-names = "gmi"; + resets = <&tegra_car 42>; + reset-names = "gmi"; + status = "disabled"; + }; + pwm: pwm@7000a000 { compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; diff --git a/arch/arm/boot/dts/tps65217.dtsi b/arch/arm/boot/dts/tps65217.dtsi index a63272422d76..02de56b55823 100644 --- a/arch/arm/boot/dts/tps65217.dtsi +++ b/arch/arm/boot/dts/tps65217.dtsi @@ -13,6 +13,18 @@ &tps { compatible = "ti,tps65217"; + interrupt-controller; + #interrupt-cells = <1>; + + charger { + compatible = "ti,tps65217-charger"; + status = "disabled"; + }; + + pwrbutton { + compatible = "ti,tps65217-pwrbutton"; + status = "disabled"; + }; regulators { #address-cells = <1>; diff --git a/arch/arm/boot/dts/uniphier-common32.dtsi b/arch/arm/boot/dts/uniphier-common32.dtsi deleted file mode 100644 index 8c8a85176b64..000000000000 --- a/arch/arm/boot/dts/uniphier-common32.dtsi +++ /dev/null @@ -1,199 +0,0 @@ -/* - * Device Tree Source commonly used by UniPhier ARM SoCs - * - * Copyright (C) 2015-2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/include/ "skeleton.dtsi" - -/ { - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - clocks { - refclk: ref { - #clock-cells = <0>; - compatible = "fixed-clock"; - }; - }; - - soc: soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - interrupt-parent = <&intc>; - - serial0: serial@54006800 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006800 0x40>; - interrupts = <0 33 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; - clocks = <&peri_clk 0>; - }; - - serial1: serial@54006900 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006900 0x40>; - interrupts = <0 35 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - clocks = <&peri_clk 1>; - }; - - serial2: serial@54006a00 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006a00 0x40>; - interrupts = <0 37 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - clocks = <&peri_clk 2>; - }; - - serial3: serial@54006b00 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006b00 0x40>; - interrupts = <0 177 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - clocks = <&peri_clk 3>; - }; - - system_bus: system-bus@58c00000 { - compatible = "socionext,uniphier-system-bus"; - status = "disabled"; - reg = <0x58c00000 0x400>; - #address-cells = <2>; - #size-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_system_bus>; - }; - - smpctrl@59800000 { - compatible = "socionext,uniphier-smpctrl"; - reg = <0x59801000 0x400>; - }; - - mioctrl@59810000 { - compatible = "socionext,uniphier-mioctrl", - "simple-mfd", "syscon"; - reg = <0x59810000 0x800>; - - mio_clk: clock { - #clock-cells = <1>; - }; - - mio_rst: reset { - #reset-cells = <1>; - }; - }; - - perictrl@59820000 { - compatible = "socionext,uniphier-perictrl", - "simple-mfd", "syscon"; - reg = <0x59820000 0x200>; - - peri_clk: clock { - #clock-cells = <1>; - }; - - peri_rst: reset { - #reset-cells = <1>; - }; - }; - - timer@60000200 { - compatible = "arm,cortex-a9-global-timer"; - reg = <0x60000200 0x20>; - interrupts = <1 11 0x104>; - clocks = <&arm_timer_clk>; - }; - - timer@60000600 { - compatible = "arm,cortex-a9-twd-timer"; - reg = <0x60000600 0x20>; - interrupts = <1 13 0x104>; - clocks = <&arm_timer_clk>; - }; - - intc: interrupt-controller@60001000 { - compatible = "arm,cortex-a9-gic"; - reg = <0x60001000 0x1000>, - <0x60000100 0x100>; - #interrupt-cells = <3>; - interrupt-controller; - }; - - soc-glue@5f800000 { - compatible = "socionext,uniphier-soc-glue", - "simple-mfd", "syscon"; - reg = <0x5f800000 0x2000>; - - pinctrl: pinctrl { - /* specify compatible in each SoC DTSI */ - }; - }; - - sysctrl@61840000 { - compatible = "socionext,uniphier-sysctrl", - "simple-mfd", "syscon"; - reg = <0x61840000 0x4000>; - - sys_clk: clock { - #clock-cells = <1>; - }; - - sys_rst: reset { - #reset-cells = <1>; - }; - }; - }; -}; - -/include/ "uniphier-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi index 95f342c9d9c1..a7c494d7c43a 100644 --- a/arch/arm/boot/dts/uniphier-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ld4.dtsi @@ -43,7 +43,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "uniphier-common32.dtsi" +/include/ "skeleton.dtsi" / { compatible = "socionext,uniphier-ld4"; @@ -61,147 +61,267 @@ }; }; + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + clocks { + refclk: ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + arm_timer_clk: arm_timer_clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <50000000>; }; }; -}; - -&soc { - l2: l2-cache@500c0000 { - compatible = "socionext,uniphier-system-cache"; - reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; - interrupts = <0 174 4>, <0 175 4>; - cache-unified; - cache-size = <(512 * 1024)>; - cache-sets = <256>; - cache-line-size = <128>; - cache-level = <2>; - }; - i2c0: i2c@58400000 { - compatible = "socionext,uniphier-i2c"; - status = "disabled"; - reg = <0x58400000 0x40>; + soc { + compatible = "simple-bus"; #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 41 1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0>; - clocks = <&peri_clk 4>; - clock-frequency = <100000>; - }; + #size-cells = <1>; + ranges; + interrupt-parent = <&intc>; - i2c1: i2c@58480000 { - compatible = "socionext,uniphier-i2c"; - status = "disabled"; - reg = <0x58480000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 42 1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - clocks = <&peri_clk 5>; - clock-frequency = <100000>; - }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(512 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; - /* chip-internal connection for DMD */ - i2c2: i2c@58500000 { - compatible = "socionext,uniphier-i2c"; - reg = <0x58500000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 43 1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - clocks = <&peri_clk 6>; - clock-frequency = <400000>; - }; + serial0: serial@54006800 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x40>; + interrupts = <0 33 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + clocks = <&peri_clk 0>; + }; - i2c3: i2c@58580000 { - compatible = "socionext,uniphier-i2c"; - status = "disabled"; - reg = <0x58580000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 44 1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - clocks = <&peri_clk 7>; - clock-frequency = <100000>; - }; + serial1: serial@54006900 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x40>; + interrupts = <0 35 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + clocks = <&peri_clk 1>; + }; - usb0: usb@5a800100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a800100 0x100>; - interrupts = <0 80 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb0>; - clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>; - resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>; - }; + serial2: serial@54006a00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x40>; + interrupts = <0 37 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + clocks = <&peri_clk 2>; + }; - usb1: usb@5a810100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a810100 0x100>; - interrupts = <0 81 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb1>; - clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>; - resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>; - }; + serial3: serial@54006b00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x40>; + interrupts = <0 29 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + clocks = <&peri_clk 3>; + }; - usb2: usb@5a820100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a820100 0x100>; - interrupts = <0 82 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb2>; - clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>; - resets = <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>, <&sys_rst 8>; - }; + i2c0: i2c@58400000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58400000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&peri_clk 4>; + clock-frequency = <100000>; + }; -}; + i2c1: i2c@58480000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58480000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 42 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&peri_clk 5>; + clock-frequency = <100000>; + }; -&refclk { - clock-frequency = <24576000>; -}; + /* chip-internal connection for DMD */ + i2c2: i2c@58500000 { + compatible = "socionext,uniphier-i2c"; + reg = <0x58500000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 43 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clocks = <&peri_clk 6>; + clock-frequency = <400000>; + }; -&serial3 { - interrupts = <0 29 4>; -}; + i2c3: i2c@58580000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58580000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 44 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clocks = <&peri_clk 7>; + clock-frequency = <100000>; + }; -&mio_clk { - compatible = "socionext,uniphier-ld4-mio-clock"; -}; + system_bus: system-bus@58c00000 { + compatible = "socionext,uniphier-system-bus"; + status = "disabled"; + reg = <0x58c00000 0x400>; + #address-cells = <2>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_system_bus>; + }; -&mio_rst { - compatible = "socionext,uniphier-ld4-mio-reset"; - resets = <&sys_rst 7>; -}; + smpctrl@59800000 { + compatible = "socionext,uniphier-smpctrl"; + reg = <0x59801000 0x400>; + }; -&peri_clk { - compatible = "socionext,uniphier-ld4-peri-clock"; -}; + mioctrl@59810000 { + compatible = "socionext,uniphier-ld4-mioctrl", + "simple-mfd", "syscon"; + reg = <0x59810000 0x800>; -&peri_rst { - compatible = "socionext,uniphier-ld4-peri-reset"; -}; + mio_clk: clock { + compatible = "socionext,uniphier-ld4-mio-clock"; + #clock-cells = <1>; + }; -&pinctrl { - compatible = "socionext,uniphier-ld4-pinctrl"; -}; + mio_rst: reset { + compatible = "socionext,uniphier-ld4-mio-reset"; + #reset-cells = <1>; + }; + }; -&sys_clk { - compatible = "socionext,uniphier-ld4-clock"; -}; + perictrl@59820000 { + compatible = "socionext,uniphier-ld4-perictrl", + "simple-mfd", "syscon"; + reg = <0x59820000 0x200>; + + peri_clk: clock { + compatible = "socionext,uniphier-ld4-peri-clock"; + #clock-cells = <1>; + }; + + peri_rst: reset { + compatible = "socionext,uniphier-ld4-peri-reset"; + #reset-cells = <1>; + }; + }; + + usb0: usb@5a800100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a800100 0x100>; + interrupts = <0 80 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>; + clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, + <&mio_rst 12>; + }; + + usb1: usb@5a810100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a810100 0x100>; + interrupts = <0 81 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, + <&mio_rst 13>; + }; -&sys_rst { - compatible = "socionext,uniphier-ld4-reset"; + usb2: usb@5a820100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a820100 0x100>; + interrupts = <0 82 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2>; + clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>, + <&mio_rst 14>; + }; + + soc-glue@5f800000 { + compatible = "socionext,uniphier-ld4-soc-glue", + "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + pinctrl: pinctrl { + compatible = "socionext,uniphier-ld4-pinctrl"; + }; + }; + + timer@60000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x60000200 0x20>; + interrupts = <1 11 0x104>; + clocks = <&arm_timer_clk>; + }; + + timer@60000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x60000600 0x20>; + interrupts = <1 13 0x104>; + clocks = <&arm_timer_clk>; + }; + + intc: interrupt-controller@60001000 { + compatible = "arm,cortex-a9-gic"; + reg = <0x60001000 0x1000>, + <0x60000100 0x100>; + #interrupt-cells = <3>; + interrupt-controller; + }; + + sysctrl@61840000 { + compatible = "socionext,uniphier-ld4-sysctrl", + "simple-mfd", "syscon"; + reg = <0x61840000 0x10000>; + + sys_clk: clock { + compatible = "socionext,uniphier-ld4-clock"; + #clock-cells = <1>; + }; + + sys_rst: reset { + compatible = "socionext,uniphier-ld4-reset"; + #reset-cells = <1>; + }; + }; + }; }; + +/include/ "uniphier-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi index 10a711041b4a..8ee79da9af7c 100644 --- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi +++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi @@ -1,7 +1,8 @@ /* * Device Tree Source for UniPhier SoCs default pinctrl settings * - * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2015-2017 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -43,6 +44,11 @@ */ &pinctrl { + pinctrl_emmc: emmc_grp { + groups = "emmc"; + function = "emmc"; + }; + pinctrl_i2c0: i2c0_grp { groups = "i2c0"; function = "i2c0"; @@ -78,6 +84,16 @@ function = "nand"; }; + pinctrl_sd: sd_grp { + groups = "sd"; + function = "sd"; + }; + + pinctrl_sd1: sd1_grp { + groups = "sd1"; + function = "sd1"; + }; + pinctrl_system_bus: system_bus_grp { groups = "system_bus", "system_bus_cs1"; function = "system_bus"; diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index ba700267ad66..e960b09ff01c 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -43,7 +43,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "uniphier-common32.dtsi" +/include/ "skeleton.dtsi" / { compatible = "socionext,uniphier-pro4"; @@ -69,155 +69,279 @@ }; }; + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + clocks { + refclk: ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + arm_timer_clk: arm_timer_clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <50000000>; }; }; -}; -&soc { - l2: l2-cache@500c0000 { - compatible = "socionext,uniphier-system-cache"; - reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; - interrupts = <0 174 4>, <0 175 4>; - cache-unified; - cache-size = <(768 * 1024)>; - cache-sets = <256>; - cache-line-size = <128>; - cache-level = <2>; - }; - - i2c0: i2c@58780000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58780000 0x80>; + soc { + compatible = "simple-bus"; #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 41 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0>; - clocks = <&peri_clk 4>; - clock-frequency = <100000>; - }; + #size-cells = <1>; + ranges; + interrupt-parent = <&intc>; - i2c1: i2c@58781000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58781000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 42 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - clocks = <&peri_clk 5>; - clock-frequency = <100000>; - }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(768 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; - i2c2: i2c@58782000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58782000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 43 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - clocks = <&peri_clk 6>; - clock-frequency = <100000>; - }; + serial0: serial@54006800 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x40>; + interrupts = <0 33 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + clocks = <&peri_clk 0>; + }; - i2c3: i2c@58783000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58783000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 44 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - clocks = <&peri_clk 7>; - clock-frequency = <100000>; - }; + serial1: serial@54006900 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x40>; + interrupts = <0 35 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + clocks = <&peri_clk 1>; + }; - /* i2c4 does not exist */ + serial2: serial@54006a00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x40>; + interrupts = <0 37 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + clocks = <&peri_clk 2>; + }; - /* chip-internal connection for DMD */ - i2c5: i2c@58785000 { - compatible = "socionext,uniphier-fi2c"; - reg = <0x58785000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 25 4>; - clocks = <&peri_clk 9>; - clock-frequency = <400000>; - }; + serial3: serial@54006b00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x40>; + interrupts = <0 177 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + clocks = <&peri_clk 3>; + }; - /* chip-internal connection for HDMI */ - i2c6: i2c@58786000 { - compatible = "socionext,uniphier-fi2c"; - reg = <0x58786000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 26 4>; - clocks = <&peri_clk 10>; - clock-frequency = <400000>; - }; + i2c0: i2c@58780000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58780000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&peri_clk 4>; + clock-frequency = <100000>; + }; - usb2: usb@5a800100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a800100 0x100>; - interrupts = <0 80 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb2>; - clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>; - resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>; - }; + i2c1: i2c@58781000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58781000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 42 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&peri_clk 5>; + clock-frequency = <100000>; + }; - usb3: usb@5a810100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a810100 0x100>; - interrupts = <0 81 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb3>; - clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>; - resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>; - }; -}; + i2c2: i2c@58782000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58782000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 43 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clocks = <&peri_clk 6>; + clock-frequency = <100000>; + }; -&refclk { - clock-frequency = <25000000>; -}; + i2c3: i2c@58783000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58783000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 44 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clocks = <&peri_clk 7>; + clock-frequency = <100000>; + }; -&mio_clk { - compatible = "socionext,uniphier-pro4-mio-clock"; -}; + /* i2c4 does not exist */ -&mio_rst { - compatible = "socionext,uniphier-pro4-mio-reset"; - resets = <&sys_rst 7>; -}; + /* chip-internal connection for DMD */ + i2c5: i2c@58785000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58785000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 25 4>; + clocks = <&peri_clk 9>; + clock-frequency = <400000>; + }; -&peri_clk { - compatible = "socionext,uniphier-pro4-peri-clock"; -}; + /* chip-internal connection for HDMI */ + i2c6: i2c@58786000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58786000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 26 4>; + clocks = <&peri_clk 10>; + clock-frequency = <400000>; + }; -&peri_rst { - compatible = "socionext,uniphier-pro4-peri-reset"; -}; + system_bus: system-bus@58c00000 { + compatible = "socionext,uniphier-system-bus"; + status = "disabled"; + reg = <0x58c00000 0x400>; + #address-cells = <2>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_system_bus>; + }; -&pinctrl { - compatible = "socionext,uniphier-pro4-pinctrl"; -}; + smpctrl@59800000 { + compatible = "socionext,uniphier-smpctrl"; + reg = <0x59801000 0x400>; + }; -&sys_clk { - compatible = "socionext,uniphier-pro4-clock"; -}; + mioctrl@59810000 { + compatible = "socionext,uniphier-pro4-mioctrl", + "simple-mfd", "syscon"; + reg = <0x59810000 0x800>; + + mio_clk: clock { + compatible = "socionext,uniphier-pro4-mio-clock"; + #clock-cells = <1>; + }; + + mio_rst: reset { + compatible = "socionext,uniphier-pro4-mio-reset"; + #reset-cells = <1>; + }; + }; + + perictrl@59820000 { + compatible = "socionext,uniphier-pro4-perictrl", + "simple-mfd", "syscon"; + reg = <0x59820000 0x200>; + + peri_clk: clock { + compatible = "socionext,uniphier-pro4-peri-clock"; + #clock-cells = <1>; + }; + + peri_rst: reset { + compatible = "socionext,uniphier-pro4-peri-reset"; + #reset-cells = <1>; + }; + }; -&sys_rst { - compatible = "socionext,uniphier-pro4-reset"; + usb2: usb@5a800100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a800100 0x100>; + interrupts = <0 80 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2>; + clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, + <&mio_rst 12>; + }; + + usb3: usb@5a810100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a810100 0x100>; + interrupts = <0 81 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3>; + clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, + <&mio_rst 13>; + }; + + soc-glue@5f800000 { + compatible = "socionext,uniphier-pro4-soc-glue", + "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + pinctrl: pinctrl { + compatible = "socionext,uniphier-pro4-pinctrl"; + }; + }; + + timer@60000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x60000200 0x20>; + interrupts = <1 11 0x304>; + clocks = <&arm_timer_clk>; + }; + + timer@60000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x60000600 0x20>; + interrupts = <1 13 0x304>; + clocks = <&arm_timer_clk>; + }; + + intc: interrupt-controller@60001000 { + compatible = "arm,cortex-a9-gic"; + reg = <0x60001000 0x1000>, + <0x60000100 0x100>; + #interrupt-cells = <3>; + interrupt-controller; + }; + + sysctrl@61840000 { + compatible = "socionext,uniphier-pro4-sysctrl", + "simple-mfd", "syscon"; + reg = <0x61840000 0x10000>; + + sys_clk: clock { + compatible = "socionext,uniphier-pro4-clock"; + #clock-cells = <1>; + }; + + sys_rst: reset { + compatible = "socionext,uniphier-pro4-reset"; + #reset-cells = <1>; + }; + }; + }; }; + +/include/ "uniphier-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index 5357ea9c14b1..dbc5e5333163 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -43,7 +43,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "uniphier-common32.dtsi" +/include/ "skeleton.dtsi" / { compatible = "socionext,uniphier-pro5"; @@ -56,157 +56,355 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + clocks = <&sys_clk 32>; enable-method = "psci"; next-level-cache = <&l2>; + operating-points-v2 = <&cpu_opp>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + clocks = <&sys_clk 32>; enable-method = "psci"; next-level-cache = <&l2>; + operating-points-v2 = <&cpu_opp>; }; }; + cpu_opp: opp_table { + compatible = "operating-points-v2"; + opp-shared; + + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + clock-latency-ns = <300>; + }; + opp@116667000 { + opp-hz = /bits/ 64 <116667000>; + clock-latency-ns = <300>; + }; + opp@150000000 { + opp-hz = /bits/ 64 <150000000>; + clock-latency-ns = <300>; + }; + opp@175000000 { + opp-hz = /bits/ 64 <175000000>; + clock-latency-ns = <300>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + clock-latency-ns = <300>; + }; + opp@233334000 { + opp-hz = /bits/ 64 <233334000>; + clock-latency-ns = <300>; + }; + opp@300000000 { + opp-hz = /bits/ 64 <300000000>; + clock-latency-ns = <300>; + }; + opp@350000000 { + opp-hz = /bits/ 64 <350000000>; + clock-latency-ns = <300>; + }; + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + clock-latency-ns = <300>; + }; + opp@466667000 { + opp-hz = /bits/ 64 <466667000>; + clock-latency-ns = <300>; + }; + opp@600000000 { + opp-hz = /bits/ 64 <600000000>; + clock-latency-ns = <300>; + }; + opp@700000000 { + opp-hz = /bits/ 64 <700000000>; + clock-latency-ns = <300>; + }; + opp@800000000 { + opp-hz = /bits/ 64 <800000000>; + clock-latency-ns = <300>; + }; + opp@933334000 { + opp-hz = /bits/ 64 <933334000>; + clock-latency-ns = <300>; + }; + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + clock-latency-ns = <300>; + }; + opp@1400000000 { + opp-hz = /bits/ 64 <1400000000>; + clock-latency-ns = <300>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + clocks { + refclk: ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <20000000>; + }; + arm_timer_clk: arm_timer_clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <50000000>; }; }; -}; -&soc { - l2: l2-cache@500c0000 { - compatible = "socionext,uniphier-system-cache"; - reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, <0x506c0000 0x400>; - interrupts = <0 190 4>, <0 191 4>; - cache-unified; - cache-size = <(2 * 1024 * 1024)>; - cache-sets = <512>; - cache-line-size = <128>; - cache-level = <2>; - next-level-cache = <&l3>; - }; + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-parent = <&intc>; - l3: l3-cache@500c8000 { - compatible = "socionext,uniphier-system-cache"; - reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, <0x506c8000 0x400>; - interrupts = <0 174 4>, <0 175 4>; - cache-unified; - cache-size = <(2 * 1024 * 1024)>; - cache-sets = <512>; - cache-line-size = <256>; - cache-level = <3>; - }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, + <0x506c0000 0x400>; + interrupts = <0 190 4>, <0 191 4>; + cache-unified; + cache-size = <(2 * 1024 * 1024)>; + cache-sets = <512>; + cache-line-size = <128>; + cache-level = <2>; + next-level-cache = <&l3>; + }; - i2c0: i2c@58780000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58780000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 41 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0>; - clocks = <&peri_clk 4>; - clock-frequency = <100000>; - }; + l3: l3-cache@500c8000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, + <0x506c8000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(2 * 1024 * 1024)>; + cache-sets = <512>; + cache-line-size = <256>; + cache-level = <3>; + }; - i2c1: i2c@58781000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58781000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 42 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - clocks = <&peri_clk 5>; - clock-frequency = <100000>; - }; + serial0: serial@54006800 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x40>; + interrupts = <0 33 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + clocks = <&peri_clk 0>; + }; - i2c2: i2c@58782000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58782000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 43 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - clocks = <&peri_clk 6>; - clock-frequency = <100000>; - }; + serial1: serial@54006900 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x40>; + interrupts = <0 35 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + clocks = <&peri_clk 1>; + }; - i2c3: i2c@58783000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58783000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 44 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - clocks = <&peri_clk 7>; - clock-frequency = <100000>; - }; + serial2: serial@54006a00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x40>; + interrupts = <0 37 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + clocks = <&peri_clk 2>; + }; - /* i2c4 does not exist */ + serial3: serial@54006b00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x40>; + interrupts = <0 177 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + clocks = <&peri_clk 3>; + }; - /* chip-internal connection for DMD */ - i2c5: i2c@58785000 { - compatible = "socionext,uniphier-fi2c"; - reg = <0x58785000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 25 4>; - clocks = <&peri_clk 9>; - clock-frequency = <400000>; - }; + i2c0: i2c@58780000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58780000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&peri_clk 4>; + clock-frequency = <100000>; + }; - /* chip-internal connection for HDMI */ - i2c6: i2c@58786000 { - compatible = "socionext,uniphier-fi2c"; - reg = <0x58786000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 26 4>; - clocks = <&peri_clk 10>; - clock-frequency = <400000>; - }; -}; + i2c1: i2c@58781000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58781000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 42 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&peri_clk 5>; + clock-frequency = <100000>; + }; -&refclk { - clock-frequency = <20000000>; -}; + i2c2: i2c@58782000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58782000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 43 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clocks = <&peri_clk 6>; + clock-frequency = <100000>; + }; -&mio_clk { - compatible = "socionext,uniphier-pro5-sd-clock"; -}; + i2c3: i2c@58783000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58783000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 44 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clocks = <&peri_clk 7>; + clock-frequency = <100000>; + }; -&mio_rst { - compatible = "socionext,uniphier-pro5-sd-reset"; -}; + /* i2c4 does not exist */ -&peri_clk { - compatible = "socionext,uniphier-pro5-peri-clock"; -}; + /* chip-internal connection for DMD */ + i2c5: i2c@58785000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58785000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 25 4>; + clocks = <&peri_clk 9>; + clock-frequency = <400000>; + }; -&peri_rst { - compatible = "socionext,uniphier-pro5-peri-reset"; -}; + /* chip-internal connection for HDMI */ + i2c6: i2c@58786000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58786000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 26 4>; + clocks = <&peri_clk 10>; + clock-frequency = <400000>; + }; -&pinctrl { - compatible = "socionext,uniphier-pro5-pinctrl"; -}; + system_bus: system-bus@58c00000 { + compatible = "socionext,uniphier-system-bus"; + status = "disabled"; + reg = <0x58c00000 0x400>; + #address-cells = <2>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_system_bus>; + }; -&sys_clk { - compatible = "socionext,uniphier-pro5-clock"; -}; + smpctrl@59800000 { + compatible = "socionext,uniphier-smpctrl"; + reg = <0x59801000 0x400>; + }; -&sys_rst { - compatible = "socionext,uniphier-pro5-reset"; + sdctrl@59810000 { + compatible = "socionext,uniphier-pro5-sdctrl", + "simple-mfd", "syscon"; + reg = <0x59810000 0x800>; + + sd_clk: clock { + compatible = "socionext,uniphier-pro5-sd-clock"; + #clock-cells = <1>; + }; + + sd_rst: reset { + compatible = "socionext,uniphier-pro5-sd-reset"; + #reset-cells = <1>; + }; + }; + + perictrl@59820000 { + compatible = "socionext,uniphier-pro5-perictrl", + "simple-mfd", "syscon"; + reg = <0x59820000 0x200>; + + peri_clk: clock { + compatible = "socionext,uniphier-pro5-peri-clock"; + #clock-cells = <1>; + }; + + peri_rst: reset { + compatible = "socionext,uniphier-pro5-peri-reset"; + #reset-cells = <1>; + }; + }; + + soc-glue@5f800000 { + compatible = "socionext,uniphier-pro5-soc-glue", + "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + pinctrl: pinctrl { + compatible = "socionext,uniphier-pro5-pinctrl"; + }; + }; + + timer@60000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x60000200 0x20>; + interrupts = <1 11 0x304>; + clocks = <&arm_timer_clk>; + }; + + timer@60000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x60000600 0x20>; + interrupts = <1 13 0x304>; + clocks = <&arm_timer_clk>; + }; + + intc: interrupt-controller@60001000 { + compatible = "arm,cortex-a9-gic"; + reg = <0x60001000 0x1000>, + <0x60000100 0x100>; + #interrupt-cells = <3>; + interrupt-controller; + }; + + sysctrl@61840000 { + compatible = "socionext,uniphier-pro5-sysctrl", + "simple-mfd", "syscon"; + reg = <0x61840000 0x10000>; + + sys_clk: clock { + compatible = "socionext,uniphier-pro5-clock"; + #clock-cells = <1>; + }; + + sys_rst: reset { + compatible = "socionext,uniphier-pro5-reset"; + #reset-cells = <1>; + }; + }; + }; }; + +/include/ "uniphier-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index 950f07ba0337..e9e031d63c1a 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -43,7 +43,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "uniphier-common32.dtsi" +/include/ "skeleton.dtsi" / { compatible = "socionext,uniphier-pxs2"; @@ -56,170 +56,339 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + clocks = <&sys_clk 32>; enable-method = "psci"; next-level-cache = <&l2>; + operating-points-v2 = <&cpu_opp>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + clocks = <&sys_clk 32>; enable-method = "psci"; next-level-cache = <&l2>; + operating-points-v2 = <&cpu_opp>; }; cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; + clocks = <&sys_clk 32>; enable-method = "psci"; next-level-cache = <&l2>; + operating-points-v2 = <&cpu_opp>; }; cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; + clocks = <&sys_clk 32>; enable-method = "psci"; next-level-cache = <&l2>; + operating-points-v2 = <&cpu_opp>; }; }; + cpu_opp: opp_table { + compatible = "operating-points-v2"; + opp-shared; + + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + clock-latency-ns = <300>; + }; + opp@150000000 { + opp-hz = /bits/ 64 <150000000>; + clock-latency-ns = <300>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + clock-latency-ns = <300>; + }; + opp@300000000 { + opp-hz = /bits/ 64 <300000000>; + clock-latency-ns = <300>; + }; + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + clock-latency-ns = <300>; + }; + opp@600000000 { + opp-hz = /bits/ 64 <600000000>; + clock-latency-ns = <300>; + }; + opp@800000000 { + opp-hz = /bits/ 64 <800000000>; + clock-latency-ns = <300>; + }; + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + clock-latency-ns = <300>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + clocks { + refclk: ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + arm_timer_clk: arm_timer_clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <50000000>; }; }; -}; - -&soc { - l2: l2-cache@500c0000 { - compatible = "socionext,uniphier-system-cache"; - reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; - interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>; - cache-unified; - cache-size = <(1280 * 1024)>; - cache-sets = <512>; - cache-line-size = <128>; - cache-level = <2>; - }; - i2c0: i2c@58780000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58780000 0x80>; + soc { + compatible = "simple-bus"; #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 41 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0>; - clocks = <&peri_clk 4>; - clock-frequency = <100000>; - }; + #size-cells = <1>; + ranges; + interrupt-parent = <&intc>; - i2c1: i2c@58781000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58781000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 42 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - clocks = <&peri_clk 5>; - clock-frequency = <100000>; - }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>; + cache-unified; + cache-size = <(1280 * 1024)>; + cache-sets = <512>; + cache-line-size = <128>; + cache-level = <2>; + }; - i2c2: i2c@58782000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58782000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - interrupts = <0 43 4>; - clocks = <&peri_clk 6>; - clock-frequency = <100000>; - }; + serial0: serial@54006800 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x40>; + interrupts = <0 33 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + clocks = <&peri_clk 0>; + }; - i2c3: i2c@58783000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58783000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 44 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - clocks = <&peri_clk 7>; - clock-frequency = <100000>; - }; + serial1: serial@54006900 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x40>; + interrupts = <0 35 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + clocks = <&peri_clk 1>; + }; - /* chip-internal connection for DMD */ - i2c4: i2c@58784000 { - compatible = "socionext,uniphier-fi2c"; - reg = <0x58784000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 45 4>; - clocks = <&peri_clk 8>; - clock-frequency = <400000>; - }; + serial2: serial@54006a00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x40>; + interrupts = <0 37 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + clocks = <&peri_clk 2>; + }; - /* chip-internal connection for STM */ - i2c5: i2c@58785000 { - compatible = "socionext,uniphier-fi2c"; - reg = <0x58785000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 25 4>; - clocks = <&peri_clk 9>; - clock-frequency = <400000>; - }; + serial3: serial@54006b00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x40>; + interrupts = <0 177 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + clocks = <&peri_clk 3>; + }; - /* chip-internal connection for HDMI */ - i2c6: i2c@58786000 { - compatible = "socionext,uniphier-fi2c"; - reg = <0x58786000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 26 4>; - clocks = <&peri_clk 10>; - clock-frequency = <400000>; - }; -}; + i2c0: i2c@58780000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58780000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&peri_clk 4>; + clock-frequency = <100000>; + }; -&refclk { - clock-frequency = <25000000>; -}; + i2c1: i2c@58781000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58781000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 42 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&peri_clk 5>; + clock-frequency = <100000>; + }; -&mio_clk { - compatible = "socionext,uniphier-pxs2-sd-clock"; -}; + i2c2: i2c@58782000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58782000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 43 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clocks = <&peri_clk 6>; + clock-frequency = <100000>; + }; -&mio_rst { - compatible = "socionext,uniphier-pxs2-sd-reset"; -}; + i2c3: i2c@58783000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58783000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 44 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clocks = <&peri_clk 7>; + clock-frequency = <100000>; + }; -&peri_clk { - compatible = "socionext,uniphier-pxs2-peri-clock"; -}; + /* chip-internal connection for DMD */ + i2c4: i2c@58784000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58784000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 45 4>; + clocks = <&peri_clk 8>; + clock-frequency = <400000>; + }; -&peri_rst { - compatible = "socionext,uniphier-pxs2-peri-reset"; -}; + /* chip-internal connection for STM */ + i2c5: i2c@58785000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58785000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 25 4>; + clocks = <&peri_clk 9>; + clock-frequency = <400000>; + }; -&pinctrl { - compatible = "socionext,uniphier-pxs2-pinctrl"; -}; + /* chip-internal connection for HDMI */ + i2c6: i2c@58786000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58786000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 26 4>; + clocks = <&peri_clk 10>; + clock-frequency = <400000>; + }; -&sys_clk { - compatible = "socionext,uniphier-pxs2-clock"; -}; + system_bus: system-bus@58c00000 { + compatible = "socionext,uniphier-system-bus"; + status = "disabled"; + reg = <0x58c00000 0x400>; + #address-cells = <2>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_system_bus>; + }; + + smpctrl@59800000 { + compatible = "socionext,uniphier-smpctrl"; + reg = <0x59801000 0x400>; + }; + + sdctrl@59810000 { + compatible = "socionext,uniphier-pxs2-sdctrl", + "simple-mfd", "syscon"; + reg = <0x59810000 0x800>; -&sys_rst { - compatible = "socionext,uniphier-pxs2-reset"; + sd_clk: clock { + compatible = "socionext,uniphier-pxs2-sd-clock"; + #clock-cells = <1>; + }; + + sd_rst: reset { + compatible = "socionext,uniphier-pxs2-sd-reset"; + #reset-cells = <1>; + }; + }; + + perictrl@59820000 { + compatible = "socionext,uniphier-pxs2-perictrl", + "simple-mfd", "syscon"; + reg = <0x59820000 0x200>; + + peri_clk: clock { + compatible = "socionext,uniphier-pxs2-peri-clock"; + #clock-cells = <1>; + }; + + peri_rst: reset { + compatible = "socionext,uniphier-pxs2-peri-reset"; + #reset-cells = <1>; + }; + }; + + soc-glue@5f800000 { + compatible = "socionext,uniphier-pxs2-soc-glue", + "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + pinctrl: pinctrl { + compatible = "socionext,uniphier-pxs2-pinctrl"; + }; + }; + + timer@60000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x60000200 0x20>; + interrupts = <1 11 0xf04>; + clocks = <&arm_timer_clk>; + }; + + timer@60000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x60000600 0x20>; + interrupts = <1 13 0xf04>; + clocks = <&arm_timer_clk>; + }; + + intc: interrupt-controller@60001000 { + compatible = "arm,cortex-a9-gic"; + reg = <0x60001000 0x1000>, + <0x60000100 0x100>; + #interrupt-cells = <3>; + interrupt-controller; + }; + + sysctrl@61840000 { + compatible = "socionext,uniphier-pxs2-sysctrl", + "simple-mfd", "syscon"; + reg = <0x61840000 0x10000>; + + sys_clk: clock { + compatible = "socionext,uniphier-pxs2-clock"; + #clock-cells = <1>; + }; + + sys_rst: reset { + compatible = "socionext,uniphier-pxs2-reset"; + #reset-cells = <1>; + }; + }; + }; }; + +/include/ "uniphier-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/uniphier-sld3.dtsi b/arch/arm/boot/dts/uniphier-sld3.dtsi index 5fa96c939b5c..9fad6bd2db8a 100644 --- a/arch/arm/boot/dts/uniphier-sld3.dtsi +++ b/arch/arm/boot/dts/uniphier-sld3.dtsi @@ -135,7 +135,6 @@ reg = <0x54006800 0x40>; interrupts = <0 33 4>; clocks = <&sys_clk 0>; - fifo-size = <64>; }; serial1: serial@54006900 { @@ -144,7 +143,6 @@ reg = <0x54006900 0x40>; interrupts = <0 35 4>; clocks = <&sys_clk 0>; - fifo-size = <64>; }; serial2: serial@54006a00 { @@ -153,7 +151,6 @@ reg = <0x54006a00 0x40>; interrupts = <0 37 4>; clocks = <&sys_clk 0>; - fifo-size = <64>; }; i2c0: i2c@58400000 { @@ -225,7 +222,7 @@ }; mioctrl@59810000 { - compatible = "socionext,uniphier-mioctrl", + compatible = "socionext,uniphier-sld3-mioctrl", "simple-mfd", "syscon"; reg = <0x59810000 0x800>; @@ -245,6 +242,9 @@ status = "disabled"; reg = <0x5a800100 0x100>; interrupts = <0 80 4>; + clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, + <&mio_rst 12>; }; usb1: usb@5a810100 { @@ -252,6 +252,9 @@ status = "disabled"; reg = <0x5a810100 0x100>; interrupts = <0 81 4>; + clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, + <&mio_rst 13>; }; usb2: usb@5a820100 { @@ -259,6 +262,9 @@ status = "disabled"; reg = <0x5a820100 0x100>; interrupts = <0 82 4>; + clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>, + <&mio_rst 14>; }; usb3: usb@5a830100 { @@ -266,12 +272,15 @@ status = "disabled"; reg = <0x5a830100 0x100>; interrupts = <0 83 4>; + clocks = <&mio_clk 7>, <&mio_clk 11>, <&mio_clk 15>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 11>, + <&mio_rst 15>; }; sysctrl@f1840000 { - compatible = "socionext,uniphier-sysctrl", + compatible = "socionext,uniphier-sld3-sysctrl", "simple-mfd", "syscon"; - reg = <0xf1840000 0x4000>; + reg = <0xf1840000 0x10000>; sys_clk: clock { compatible = "socionext,uniphier-sld3-clock"; diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi index d8cf0e7e11ea..b2c980ead7f0 100644 --- a/arch/arm/boot/dts/uniphier-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-sld8.dtsi @@ -43,7 +43,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "uniphier-common32.dtsi" +/include/ "skeleton.dtsi" / { compatible = "socionext,uniphier-sld8"; @@ -61,146 +61,267 @@ }; }; + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + clocks { + refclk: ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + arm_timer_clk: arm_timer_clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <50000000>; }; }; -}; - -&soc { - l2: l2-cache@500c0000 { - compatible = "socionext,uniphier-system-cache"; - reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; - interrupts = <0 174 4>, <0 175 4>; - cache-unified; - cache-size = <(256 * 1024)>; - cache-sets = <256>; - cache-line-size = <128>; - cache-level = <2>; - }; - i2c0: i2c@58400000 { - compatible = "socionext,uniphier-i2c"; - status = "disabled"; - reg = <0x58400000 0x40>; + soc { + compatible = "simple-bus"; #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 41 1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0>; - clocks = <&peri_clk 4>; - clock-frequency = <100000>; - }; + #size-cells = <1>; + ranges; + interrupt-parent = <&intc>; - i2c1: i2c@58480000 { - compatible = "socionext,uniphier-i2c"; - status = "disabled"; - reg = <0x58480000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 42 1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - clocks = <&peri_clk 5>; - clock-frequency = <100000>; - }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(256 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; - /* chip-internal connection for DMD */ - i2c2: i2c@58500000 { - compatible = "socionext,uniphier-i2c"; - reg = <0x58500000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 43 1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - clocks = <&peri_clk 6>; - clock-frequency = <400000>; - }; + serial0: serial@54006800 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x40>; + interrupts = <0 33 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + clocks = <&peri_clk 0>; + }; - i2c3: i2c@58580000 { - compatible = "socionext,uniphier-i2c"; - status = "disabled"; - reg = <0x58580000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 44 1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - clocks = <&peri_clk 7>; - clock-frequency = <100000>; - }; + serial1: serial@54006900 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x40>; + interrupts = <0 35 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + clocks = <&peri_clk 1>; + }; - usb0: usb@5a800100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a800100 0x100>; - interrupts = <0 80 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb0>; - clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>; - resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>; - }; + serial2: serial@54006a00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x40>; + interrupts = <0 37 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + clocks = <&peri_clk 2>; + }; - usb1: usb@5a810100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a810100 0x100>; - interrupts = <0 81 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb1>; - clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>; - resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>; - }; + serial3: serial@54006b00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x40>; + interrupts = <0 29 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + clocks = <&peri_clk 3>; + }; - usb2: usb@5a820100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a820100 0x100>; - interrupts = <0 82 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb2>; - clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>; - resets = <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>, <&sys_rst 8>; - }; -}; + i2c0: i2c@58400000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58400000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&peri_clk 4>; + clock-frequency = <100000>; + }; -&refclk { - clock-frequency = <25000000>; -}; + i2c1: i2c@58480000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58480000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 42 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&peri_clk 5>; + clock-frequency = <100000>; + }; -&serial3 { - interrupts = <0 29 4>; -}; + /* chip-internal connection for DMD */ + i2c2: i2c@58500000 { + compatible = "socionext,uniphier-i2c"; + reg = <0x58500000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 43 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clocks = <&peri_clk 6>; + clock-frequency = <400000>; + }; -&mio_clk { - compatible = "socionext,uniphier-sld8-mio-clock"; -}; + i2c3: i2c@58580000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58580000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 44 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clocks = <&peri_clk 7>; + clock-frequency = <100000>; + }; -&mio_rst { - compatible = "socionext,uniphier-sld8-mio-reset"; - resets = <&sys_rst 7>; -}; + system_bus: system-bus@58c00000 { + compatible = "socionext,uniphier-system-bus"; + status = "disabled"; + reg = <0x58c00000 0x400>; + #address-cells = <2>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_system_bus>; + }; -&peri_clk { - compatible = "socionext,uniphier-sld8-peri-clock"; -}; + smpctrl@59800000 { + compatible = "socionext,uniphier-smpctrl"; + reg = <0x59801000 0x400>; + }; -&peri_rst { - compatible = "socionext,uniphier-sld8-peri-reset"; -}; + mioctrl@59810000 { + compatible = "socionext,uniphier-sld8-mioctrl", + "simple-mfd", "syscon"; + reg = <0x59810000 0x800>; -&pinctrl { - compatible = "socionext,uniphier-sld8-pinctrl"; -}; + mio_clk: clock { + compatible = "socionext,uniphier-sld8-mio-clock"; + #clock-cells = <1>; + }; -&sys_clk { - compatible = "socionext,uniphier-sld8-clock"; -}; + mio_rst: reset { + compatible = "socionext,uniphier-sld8-mio-reset"; + #reset-cells = <1>; + }; + }; + + perictrl@59820000 { + compatible = "socionext,uniphier-sld8-perictrl", + "simple-mfd", "syscon"; + reg = <0x59820000 0x200>; + + peri_clk: clock { + compatible = "socionext,uniphier-sld8-peri-clock"; + #clock-cells = <1>; + }; + + peri_rst: reset { + compatible = "socionext,uniphier-sld8-peri-reset"; + #reset-cells = <1>; + }; + }; + + usb0: usb@5a800100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a800100 0x100>; + interrupts = <0 80 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>; + clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, + <&mio_rst 12>; + }; + + usb1: usb@5a810100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a810100 0x100>; + interrupts = <0 81 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, + <&mio_rst 13>; + }; + + usb2: usb@5a820100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a820100 0x100>; + interrupts = <0 82 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2>; + clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>, + <&mio_rst 14>; + }; -&sys_rst { - compatible = "socionext,uniphier-sld8-reset"; + soc-glue@5f800000 { + compatible = "socionext,uniphier-sld8-soc-glue", + "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + pinctrl: pinctrl { + compatible = "socionext,uniphier-sld8-pinctrl"; + }; + }; + + timer@60000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x60000200 0x20>; + interrupts = <1 11 0x104>; + clocks = <&arm_timer_clk>; + }; + + timer@60000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x60000600 0x20>; + interrupts = <1 13 0x104>; + clocks = <&arm_timer_clk>; + }; + + intc: interrupt-controller@60001000 { + compatible = "arm,cortex-a9-gic"; + reg = <0x60001000 0x1000>, + <0x60000100 0x100>; + #interrupt-cells = <3>; + interrupt-controller; + }; + + sysctrl@61840000 { + compatible = "socionext,uniphier-sld8-sysctrl", + "simple-mfd", "syscon"; + reg = <0x61840000 0x10000>; + + sys_clk: clock { + compatible = "socionext,uniphier-sld8-clock"; + #clock-cells = <1>; + }; + + sys_rst: reset { + compatible = "socionext,uniphier-sld8-reset"; + #reset-cells = <1>; + }; + }; + }; }; + +/include/ "uniphier-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index 102838fcc588..15f4fd3f4695 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -81,7 +81,7 @@ #address-cells = <0>; interrupt-controller; reg = <0 0x2c001000 0 0x1000>, - <0 0x2c002000 0 0x1000>, + <0 0x2c002000 0 0x2000>, <0 0x2c004000 0 0x2000>, <0 0x2c006000 0 0x2000>; interrupts = <1 9 0xf04>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 0205c97efdef..bd107c5a0226 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -39,6 +39,7 @@ reg = <0>; cci-control-port = <&cci_control1>; cpu-idle-states = <&CLUSTER_SLEEP_BIG>; + capacity-dmips-mhz = <1024>; }; cpu1: cpu@1 { @@ -47,6 +48,7 @@ reg = <1>; cci-control-port = <&cci_control1>; cpu-idle-states = <&CLUSTER_SLEEP_BIG>; + capacity-dmips-mhz = <1024>; }; cpu2: cpu@2 { @@ -55,6 +57,7 @@ reg = <0x100>; cci-control-port = <&cci_control2>; cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>; + capacity-dmips-mhz = <516>; }; cpu3: cpu@3 { @@ -63,6 +66,7 @@ reg = <0x101>; cci-control-port = <&cci_control2>; cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>; + capacity-dmips-mhz = <516>; }; cpu4: cpu@4 { @@ -71,6 +75,7 @@ reg = <0x102>; cci-control-port = <&cci_control2>; cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>; + capacity-dmips-mhz = <516>; }; idle-states { @@ -126,7 +131,7 @@ #address-cells = <0>; interrupt-controller; reg = <0 0x2c001000 0 0x1000>, - <0 0x2c002000 0 0x1000>, + <0 0x2c002000 0 0x2000>, <0 0x2c004000 0 0x2000>, <0 0x2c006000 0 0x2000>; interrupts = <1 9 0xf04>; diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi index 1e0b823f7e8f..091b738041a0 100644 --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index b7417094dc11..b6a1eeeb2bb4 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -108,6 +108,10 @@ status = "okay"; }; +&edma1 { + status = "okay"; +}; + &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts index b3aeab58f718..076998968fb5 100644 --- a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi index 1a8a0efa19a6..515c4d2f28b0 100644 --- a/arch/arm/boot/dts/vf500-colibri.dtsi +++ b/arch/arm/boot/dts/vf500-colibri.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi index d7fdb2a7d97b..3d9896171bfc 100644 --- a/arch/arm/boot/dts/vf500.dtsi +++ b/arch/arm/boot/dts/vf500.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts index dbca4f86fdbb..ef9b4d6209f6 100644 --- a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi index 9ec9e337f5a8..395812c52933 100644 --- a/arch/arm/boot/dts/vf610-colibri.dtsi +++ b/arch/arm/boot/dts/vf610-colibri.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index cdc100732514..53e3b8b250c6 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index 5c1fcab4a6f7..7940408838df 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -13,17 +13,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,43 +32,23 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -#include "vf610.dtsi" +#include "vf610-zii-dev.dtsi" / { model = "ZII VF610 Development Board, Rev B"; compatible = "zii,vf610dev-b", "zii,vf610dev", "fsl,vf610"; - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory { - reg = <0x80000000 0x20000000>; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pinctrl_leds_debug>; - pinctrl-names = "default"; - - debug { - label = "zii:green:debug1"; - gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - mdio-mux { compatible = "mdio-mux-gpio"; pinctrl-0 = <&pinctrl_mdio_mux>; @@ -86,29 +66,39 @@ #address-cells = <1>; #size-cells = <0>; - switch0: switch0@0 { + switch0: switch@0 { compatible = "marvell,mv88e6085"; + pinctrl-0 = <&pinctrl_gpio_switch0>; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; reg = <0>; dsa,member = <0 0>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; ports { #address-cells = <1>; #size-cells = <0>; + port@0 { reg = <0>; label = "lan0"; + phy-handle = <&switch0phy0>; }; port@1 { reg = <1>; label = "lan1"; + phy-handle = <&switch0phy1>; }; port@2 { reg = <2>; label = "lan2"; + phy-handle = <&switch0phy2>; }; switch0port5: port@5 { @@ -127,12 +117,32 @@ reg = <6>; label = "cpu"; ethernet = <&fec1>; + fixed-link { speed = <100>; full-duplex; }; }; }; + mdio { + #address-cells = <1>; + #size-cells = <0>; + switch0phy0: switch0phy0@0 { + reg = <0>; + interrupt-parent = <&switch0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + switch0phy1: switch1phy0@1 { + reg = <1>; + interrupt-parent = <&switch0>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + }; + switch0phy2: switch1phy0@2 { + reg = <2>; + interrupt-parent = <&switch0>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + }; + }; }; }; @@ -141,16 +151,23 @@ #address-cells = <1>; #size-cells = <0>; - switch1: switch1@0 { + switch1: switch@0 { compatible = "marvell,mv88e6085"; + pinctrl-0 = <&pinctrl_gpio_switch1>; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; reg = <0>; dsa,member = <0 1>; + interrupt-parent = <&gpio0>; + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; ports { #address-cells = <1>; #size-cells = <0>; + port@0 { reg = <0>; label = "lan3"; @@ -174,6 +191,7 @@ label = "dsa"; link = <&switch2port9>; phy-mode = "rgmii-txid"; + fixed-link { speed = <1000>; full-duplex; @@ -194,14 +212,23 @@ mdio { #address-cells = <1>; #size-cells = <0>; + switch1phy0: switch1phy0@0 { reg = <0>; + interrupt-parent = <&switch1>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; }; + switch1phy1: switch1phy0@1 { reg = <1>; + interrupt-parent = <&switch1>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; }; + switch1phy2: switch1phy0@2 { reg = <2>; + interrupt-parent = <&switch1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; }; }; }; @@ -222,6 +249,7 @@ ports { #address-cells = <1>; #size-cells = <0>; + port@0 { reg = <0>; label = "lan6"; @@ -240,6 +268,7 @@ port@3 { reg = <3>; label = "optical3"; + fixed-link { speed = <1000>; full-duplex; @@ -251,6 +280,7 @@ port@4 { reg = <4>; label = "optical4"; + fixed-link { speed = <1000>; full-duplex; @@ -265,6 +295,7 @@ phy-mode = "rgmii-txid"; link = <&switch1port5 &switch0port5>; + fixed-link { speed = <1000>; full-duplex; @@ -281,25 +312,6 @@ }; }; - reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu { - compatible = "regulator-fixed"; - regulator-name = "vcc_3v3_mcu"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - usb0_vbus: regulator-usb0-vbus { - compatible = "regulator-fixed"; - pinctrl-0 = <&pinctrl_usb_vbus>; - regulator-name = "usb_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 6 0>; - }; - spi0 { compatible = "spi-gpio"; pinctrl-0 = <&pinctrl_gpio_spi0>; @@ -336,49 +348,6 @@ }; }; -&adc0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_adc0_ad5>; - vref-supply = <®_vcc_3v3_mcu>; - status = "okay"; -}; - -&edma0 { - status = "okay"; -}; - -&esdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1>; - bus-width = <4>; - status = "okay"; -}; - -&fec0 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec0>; - status = "okay"; -}; - -&fec1 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec1>; - status = "okay"; - - fixed-link { - speed = <100>; - full-duplex; - }; - - mdio1: mdio { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - }; -}; - &i2c0 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -403,33 +372,6 @@ interrupt-parent = <&gpio2>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; }; - - lm75@48 { - compatible = "national,lm75"; - reg = <0x48>; - }; - - at24c04@50 { - compatible = "atmel,24c04"; - reg = <0x50>; - }; - - at24c04@52 { - compatible = "atmel,24c04"; - reg = <0x52>; - }; - - ds1682@6b { - compatible = "dallas,ds1682"; - reg = <0x6b>; - }; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; }; &i2c2 { @@ -499,127 +441,8 @@ }; }; -&i2c3 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&usbdev0 { - disable-over-current; - vbus-supply = <&usb0_vbus>; - dr_mode = "host"; - status = "okay"; -}; - -&usbh1 { - disable-over-current; - status = "okay"; -}; - -&usbmisc0 { - status = "okay"; -}; - -&usbmisc1 { - status = "okay"; -}; - -&usbphy0 { - status = "okay"; -}; - -&usbphy1 { - status = "okay"; -}; &iomuxc { - pinctrl_adc0_ad5: adc0ad5grp { - fsl,pins = < - VF610_PAD_PTC30__ADC0_SE5 0x00a1 - >; - }; - - pinctrl_dspi0: dspi0grp { - fsl,pins = < - VF610_PAD_PTB18__DSPI0_CS1 0x1182 - VF610_PAD_PTB19__DSPI0_CS0 0x1182 - VF610_PAD_PTB20__DSPI0_SIN 0x1181 - VF610_PAD_PTB21__DSPI0_SOUT 0x1182 - VF610_PAD_PTB22__DSPI0_SCK 0x1182 - >; - }; - - pinctrl_dspi2: dspi2grp { - fsl,pins = < - VF610_PAD_PTD31__DSPI2_CS1 0x1182 - VF610_PAD_PTD30__DSPI2_CS0 0x1182 - VF610_PAD_PTD29__DSPI2_SIN 0x1181 - VF610_PAD_PTD28__DSPI2_SOUT 0x1182 - VF610_PAD_PTD27__DSPI2_SCK 0x1182 - >; - }; - - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - VF610_PAD_PTA24__ESDHC1_CLK 0x31ef - VF610_PAD_PTA25__ESDHC1_CMD 0x31ef - VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef - VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef - VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef - VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef - VF610_PAD_PTA7__GPIO_134 0x219d - >; - }; - - pinctrl_fec0: fec0grp { - fsl,pins = < - VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d2 - VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d3 - VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1 - VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1 - VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1 - VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1 - VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2 - VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2 - VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2 - >; - }; - - pinctrl_fec1: fec1grp { - fsl,pins = < - VF610_PAD_PTA6__RMII_CLKIN 0x30d1 - VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 - VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 - VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 - VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 - VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 - VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 - VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 - VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 - VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 - >; - }; - pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 { fsl,pins = < VF610_PAD_PTE27__GPIO_132 0x33e2 @@ -636,46 +459,18 @@ >; }; - pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset { - fsl,pins = < - VF610_PAD_PTE14__GPIO_119 0x31c2 - >; - }; - - pinctrl_i2c0: i2c0grp { - fsl,pins = < - VF610_PAD_PTB14__I2C0_SCL 0x37ff - VF610_PAD_PTB15__I2C0_SDA 0x37ff - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - VF610_PAD_PTB16__I2C1_SCL 0x37ff - VF610_PAD_PTB17__I2C1_SDA 0x37ff - >; - }; - - pinctrl_i2c2: i2c2grp { + pinctrl_gpio_switch0: pinctrl-gpio-switch0 { fsl,pins = < - VF610_PAD_PTA22__I2C2_SCL 0x37ff - VF610_PAD_PTA23__I2C2_SDA 0x37ff + VF610_PAD_PTB5__GPIO_27 0x219d >; }; - pinctrl_i2c3: i2c3grp { + pinctrl_gpio_switch1: pinctrl-gpio-switch1 { fsl,pins = < - VF610_PAD_PTA30__I2C3_SCL 0x37ff - VF610_PAD_PTA31__I2C3_SDA 0x37ff + VF610_PAD_PTB4__GPIO_26 0x219d >; }; - pinctrl_leds_debug: pinctrl-leds-debug { - fsl,pins = < - VF610_PAD_PTD20__GPIO_74 0x31c2 - >; - }; - pinctrl_mdio_mux: pinctrl-mdio-mux { fsl,pins = < VF610_PAD_PTA18__GPIO_8 0x31c2 @@ -690,57 +485,4 @@ VF610_PAD_PTB28__GPIO_98 0x219d >; }; - - pinctrl_pwm0: pwm0grp { - fsl,pins = < - VF610_PAD_PTB0__FTM0_CH0 0x1582 - VF610_PAD_PTB1__FTM0_CH1 0x1582 - VF610_PAD_PTB2__FTM0_CH2 0x1582 - VF610_PAD_PTB3__FTM0_CH3 0x1582 - >; - }; - - pinctrl_qspi0: qspi0grp { - fsl,pins = < - VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3 - VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff - VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3 - VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3 - VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3 - VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3 - >; - }; - - pinctrl_uart0: uart0grp { - fsl,pins = < - VF610_PAD_PTB10__UART0_TX 0x21a2 - VF610_PAD_PTB11__UART0_RX 0x21a1 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - VF610_PAD_PTB23__UART1_TX 0x21a2 - VF610_PAD_PTB24__UART1_RX 0x21a1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - VF610_PAD_PTD0__UART2_TX 0x21a2 - VF610_PAD_PTD1__UART2_RX 0x21a1 - >; - }; - - pinctrl_usb_vbus: pinctrl-usb-vbus { - fsl,pins = < - VF610_PAD_PTA16__GPIO_6 0x31c2 - >; - }; - - pinctrl_usb0_host: usb0-host-grp { - fsl,pins = < - VF610_PAD_PTD6__GPIO_85 0x0062 - >; - }; }; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts new file mode 100644 index 000000000000..6a45bd24ffe6 --- /dev/null +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts @@ -0,0 +1,416 @@ +/* + * Copyright (C) 2015, 2016 Zodiac Inflight Innovations + * + * Based on an original 'vf610-twr.dts' which is Copyright 2015, + * Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "vf610-zii-dev.dtsi" + +/ { + model = "ZII VF610 Development Board, Rev C"; + compatible = "zii,vf610dev-c", "zii,vf610dev", "fsl,vf610"; + + mdio-mux { + compatible = "mdio-mux-gpio"; + pinctrl-0 = <&pinctrl_mdio_mux>; + pinctrl-names = "default"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH + &gpio0 9 GPIO_ACTIVE_HIGH + &gpio0 25 GPIO_ACTIVE_HIGH>; + mdio-parent-bus = <&mdio1>; + #address-cells = <1>; + #size-cells = <0>; + + mdio_mux_1: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + switch0: switch@0 { + compatible = "marvell,mv88e6190"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + dsa,member = <0 0>; + eeprom-length = <512>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "lan4"; + }; + + switch0port10: port@10 { + reg = <10>; + label = "dsa"; + phy-mode = "xgmii"; + link = <&switch1port10>; + }; + }; + }; + }; + + mdio_mux_2: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + switch1: switch@0 { + compatible = "marvell,mv88e6190"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + dsa,member = <0 1>; + eeprom-length = <512>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "lan5"; + }; + + port@2 { + reg = <2>; + label = "lan6"; + }; + + port@3 { + reg = <3>; + label = "lan7"; + }; + + port@4 { + reg = <4>; + label = "lan8"; + }; + + + switch1port10: port@10 { + reg = <10>; + label = "dsa"; + phy-mode = "xgmii"; + link = <&switch0port10>; + }; + }; + }; + }; + + mdio_mux_4: mdio@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&dspi0 { + bus-num = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi0>; + status = "okay"; + spi-num-chipselects = <2>; + + m25p128@0 { + compatible = "m25p128", "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <1000000>; + }; + + atzb-rf-233@1 { + compatible = "atmel,at86rf233"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctr_atzb_rf_233>; + + spi-max-frequency = <7500000>; + reg = <1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpio3>; + xtal-trim = /bits/ 8 <0x06>; + + sleep-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio6 10 GPIO_ACTIVE_HIGH>; + + fsl,spi-cs-sck-delay = <180>; + fsl,spi-sck-cs-delay = <250>; + }; +}; + +&i2c0 { + /* + * U712 + * + * Exposed signals: + * P1 - WE2_CMD + * P2 - WE2_CLK + */ + gpio5: pca9557@18 { + compatible = "nxp,pca9557"; + reg = <0x18>; + gpio-controller; + #gpio-cells = <2>; + }; + + /* + * U121 + * + * Exposed signals: + * I/O0 - ENET_SWR_EN + * I/O1 - ESW1_RESETn + * I/O2 - ARINC_RESET + * I/O3 - DD1_IO_RESET + * I/O4 - ESW2_RESETn + * I/O5 - ESW3_RESETn + * I/O6 - ESW4_RESETn + * I/O8 - TP909 + * I/O9 - FEM_SEL + * I/O10 - WIFI_RESETn + * I/O11 - PHY_RSTn + * I/O12 - OPT1_SD + * I/O13 - OPT2_SD + * I/O14 - OPT1_TX_DIS + * I/O15 - OPT2_TX_DIS + */ + gpio6: sx1503@20 { + compatible = "semtech,sx1503q"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sx1503_20>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + interrupt-controller; + + enet_swr_en { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "enet-swr-en"; + }; + }; + + /* + * U715 + * + * Exposed signals: + * IO0 - WE1_CLK + * IO1 - WE1_CMD + */ + gpio7: pca9554@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + + }; +}; + +&i2c1 { + at24mac602@00 { + compatible = "atmel,24c02"; + reg = <0x50>; + read-only; + }; +}; + +&i2c2 { + tca9548@70 { + compatible = "nxp,pca9548"; + pinctrl-0 = <&pinctrl_i2c_mux_reset>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + sfp2: at24c04@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + sfp3: at24c04@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&gpio0 { + eth0_intrp { + gpio-hog; + gpios = <23 GPIO_ACTIVE_HIGH>; + input; + line-name = "sx1503-irq"; + }; +}; + +&gpio3 { + eth0_intrp { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + input; + line-name = "eth0-intrp"; + }; +}; + +&fec0 { + mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec0_phy_int>; + + interrupt-parent = <&gpio3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + reg = <0>; + }; + }; +}; + +&iomuxc { + pinctr_atzb_rf_233: pinctrl-atzb-rf-233 { + fsl,pins = < + VF610_PAD_PTB2__GPIO_24 0x31c2 + VF610_PAD_PTE27__GPIO_132 0x33e2 + >; + }; + + + pinctrl_sx1503_20: pinctrl-sx1503-20 { + fsl,pins = < + VF610_PAD_PTB1__GPIO_23 0x219d + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + VF610_PAD_PTA20__UART3_TX 0x21a2 + VF610_PAD_PTA21__UART3_RX 0x21a1 + >; + }; + + pinctrl_mdio_mux: pinctrl-mdio-mux { + fsl,pins = < + VF610_PAD_PTA18__GPIO_8 0x31c2 + VF610_PAD_PTA19__GPIO_9 0x31c2 + VF610_PAD_PTB3__GPIO_25 0x31c2 + >; + }; + + pinctrl_fec0_phy_int: pinctrl-fec0-phy-int { + fsl,pins = < + VF610_PAD_PTB28__GPIO_98 0x219d + >; + }; +}; diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi new file mode 100644 index 000000000000..ca9e1bc35e45 --- /dev/null +++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi @@ -0,0 +1,383 @@ +/* + * Copyright (C) 2015, 2016 Zodiac Inflight Innovations + * + * Based on an original 'vf610-twr.dts' which is Copyright 2015, + * Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "vf610.dtsi" + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x80000000 0x20000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + debug { + label = "zii:green:debug1"; + gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + usb0_vbus: regulator-usb0-vbus { + compatible = "regulator-fixed"; + pinctrl-0 = <&pinctrl_usb_vbus>; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 6 0>; + }; +}; + +&adc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_ad5>; + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&edma0 { + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec0>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + status = "okay"; + + lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24c04@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + }; + + at24c04@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + }; + + ds1682@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbdev0 { + disable-over-current; + vbus-supply = <&usb0_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usbh1 { + disable-over-current; + status = "okay"; +}; + +&usbmisc0 { + status = "okay"; +}; + +&usbmisc1 { + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; + +&iomuxc { + pinctrl_adc0_ad5: adc0ad5grp { + fsl,pins = < + VF610_PAD_PTC30__ADC0_SE5 0x00a1 + >; + }; + + pinctrl_dspi0: dspi0grp { + fsl,pins = < + VF610_PAD_PTB18__DSPI0_CS1 0x1182 + VF610_PAD_PTB19__DSPI0_CS0 0x1182 + VF610_PAD_PTB20__DSPI0_SIN 0x1181 + VF610_PAD_PTB21__DSPI0_SOUT 0x1182 + VF610_PAD_PTB22__DSPI0_SCK 0x1182 + >; + }; + + pinctrl_dspi2: dspi2grp { + fsl,pins = < + VF610_PAD_PTD31__DSPI2_CS1 0x1182 + VF610_PAD_PTD30__DSPI2_CS0 0x1182 + VF610_PAD_PTD29__DSPI2_SIN 0x1181 + VF610_PAD_PTD28__DSPI2_SOUT 0x1182 + VF610_PAD_PTD27__DSPI2_SCK 0x1182 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTA7__GPIO_134 0x219d + >; + }; + + pinctrl_fec0: fec0grp { + fsl,pins = < + VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d2 + VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d3 + VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1 + VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1 + VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1 + VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1 + VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2 + VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2 + VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_gpio_spi0: pinctrl-gpio-spi0 { + fsl,pins = < + VF610_PAD_PTB22__GPIO_44 0x33e2 + VF610_PAD_PTB21__GPIO_43 0x33e2 + VF610_PAD_PTB20__GPIO_42 0x33e1 + VF610_PAD_PTB19__GPIO_41 0x33e2 + VF610_PAD_PTB18__GPIO_40 0x33e2 + >; + }; + + pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset { + fsl,pins = < + VF610_PAD_PTE14__GPIO_119 0x31c2 + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + + pinctrl_i2c0_gpio: i2c0grp-gpio { + fsl,pins = < + VF610_PAD_PTB14__GPIO_36 0x31c2 + VF610_PAD_PTB15__GPIO_37 0x31c2 + >; + }; + + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + VF610_PAD_PTB16__I2C1_SCL 0x37ff + VF610_PAD_PTB17__I2C1_SDA 0x37ff + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + VF610_PAD_PTA22__I2C2_SCL 0x37ff + VF610_PAD_PTA23__I2C2_SDA 0x37ff + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTD20__GPIO_74 0x31c2 + >; + }; + + pinctrl_qspi0: qspi0grp { + fsl,pins = < + VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3 + VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff + VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3 + VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3 + VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3 + VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB23__UART1_TX 0x21a2 + VF610_PAD_PTB24__UART1_RX 0x21a1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTD0__UART2_TX 0x21a2 + VF610_PAD_PTD1__UART2_RX 0x21a1 + >; + }; + + pinctrl_usb_vbus: pinctrl-usb-vbus { + fsl,pins = < + VF610_PAD_PTA16__GPIO_6 0x31c2 + >; + }; + + pinctrl_usb0_host: usb0-host-grp { + fsl,pins = < + VF610_PAD_PTD6__GPIO_85 0x0062 + >; + }; +}; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 0cfc060f94d7..80fef182c672 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf610m4-colibri.dts b/arch/arm/boot/dts/vf610m4-colibri.dts index 2931a80caccb..7198e8cceb0d 100644 --- a/arch/arm/boot/dts/vf610m4-colibri.dts +++ b/arch/arm/boot/dts/vf610m4-colibri.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf610m4-cosmic.dts b/arch/arm/boot/dts/vf610m4-cosmic.dts index 8944a2d2054c..f7474c11aabd 100644 --- a/arch/arm/boot/dts/vf610m4-cosmic.dts +++ b/arch/arm/boot/dts/vf610m4-cosmic.dts @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf610m4.dtsi b/arch/arm/boot/dts/vf610m4.dtsi index 9f2c731839f2..1474bd34d0f1 100644 --- a/arch/arm/boot/dts/vf610m4.dtsi +++ b/arch/arm/boot/dts/vf610m4.dtsi @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 2c13ec696ac5..5d654b5b4ce6 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -194,6 +194,9 @@ clocks = <&clks VF610_CLK_DSPI0>; clock-names = "dspi"; spi-num-chipselects = <6>; + dmas = <&edma1 1 12>, + <&edma1 1 13>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -206,6 +209,9 @@ clocks = <&clks VF610_CLK_DSPI1>; clock-names = "dspi"; spi-num-chipselects = <4>; + dmas = <&edma1 1 14>, + <&edma1 1 15>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -520,6 +526,12 @@ status = "disabled"; }; + ocotp: ocotp@400a5000 { + compatible = "fsl,vf610-ocotp"; + reg = <0x400a5000 0x1000>; + clocks = <&clks VF610_CLK_OCOTP>; + }; + snvs0: snvs@400a7000 { compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; reg = <0x400a7000 0x2000>; @@ -561,6 +573,9 @@ clocks = <&clks VF610_CLK_DSPI2>; clock-names = "dspi"; spi-num-chipselects = <2>; + dmas = <&edma1 0 10>, + <&edma1 0 11>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -573,6 +588,9 @@ clocks = <&clks VF610_CLK_DSPI3>; clock-names = "dspi"; spi-num-chipselects = <2>; + dmas = <&edma1 0 12>, + <&edma1 0 13>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index f283ff08381c..f3ac9bfe580e 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -10,9 +10,10 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ -/include/ "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; compatible = "xlnx,zynq-7000"; cpus { @@ -41,14 +42,15 @@ }; }; - pmu { + pmu@f8891000 { compatible = "arm,cortex-a9-pmu"; interrupts = <0 5 4>, <0 6 4>; interrupt-parent = <&intc>; - reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >; + reg = <0xf8891000 0x1000>, + <0xf8893000 0x1000>; }; - regulator_vccpint: fixedregulator@0 { + regulator_vccpint: fixedregulator { compatible = "regulator-fixed"; regulator-name = "VCCPINT"; regulator-min-microvolt = <1000000>; diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts new file mode 100644 index 000000000000..b9376a4904b4 --- /dev/null +++ b/arch/arm/boot/dts/zynq-microzed.dts @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2011 - 2014 Xilinx + * Copyright (C) 2016 Jagan Teki <jteki@openedev.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +/dts-v1/; +/include/ "zynq-7000.dtsi" + +/ { + model = "Zynq MicroZED Development Board"; + compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000"; + + aliases { + ethernet0 = &gem0; + serial0 = &uart1; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + usb_phy0: phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; + +&clkc { + ps-clk-frequency = <33333333>; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@0 { + reg = <0>; + }; +}; + +&sdhci0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; +}; + +&pinctrl0 { + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO29", "MIO31", "MIO36"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34", + "MIO35", "MIO37", "MIO38", "MIO39"; + bias-disable; + }; + }; +}; diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts index 307ed201d658..64a6390fc501 100644 --- a/arch/arm/boot/dts/zynq-parallella.dts +++ b/arch/arm/boot/dts/zynq-parallella.dts @@ -28,7 +28,7 @@ serial0 = &uart1; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x40000000>; }; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index e96959b2e67a..0cdad2cc8b78 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -24,7 +24,7 @@ serial0 = &uart1; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x40000000>; }; diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index be6a986bbbd8..ad4bb06dba25 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -24,7 +24,7 @@ serial0 = &uart1; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x40000000>; }; diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts index 7250c1eac7f9..325379f7983c 100644 --- a/arch/arm/boot/dts/zynq-zed.dts +++ b/arch/arm/boot/dts/zynq-zed.dts @@ -23,7 +23,7 @@ serial0 = &uart1; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x20000000>; }; diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts index d9e0f3e70671..590ec24b8749 100644 --- a/arch/arm/boot/dts/zynq-zybo.dts +++ b/arch/arm/boot/dts/zynq-zybo.dts @@ -23,7 +23,7 @@ serial0 = &uart1; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x20000000>; }; |