diff options
Diffstat (limited to 'arch/arm/boot/dts/vf610-zii-dev-rev-c.dts')
| -rw-r--r-- | arch/arm/boot/dts/vf610-zii-dev-rev-c.dts | 48 |
1 files changed, 25 insertions, 23 deletions
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts index c6f134c78303..6f4a5602cefd 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts @@ -69,8 +69,6 @@ compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; reg = <0>; dsa,member = <0 0>; eeprom-length = <65536>; @@ -166,8 +164,6 @@ compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch1>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; reg = <0>; dsa,member = <0 1>; eeprom-length = <65536>; @@ -204,6 +200,13 @@ phy-handle = <&switch1phy4>; }; + port@9 { + reg = <9>; + label = "sff2"; + phy-mode = "sgmii"; + managed = "in-band-status"; + sfp = <&sff2>; + }; switch1port10: port@10 { reg = <10>; @@ -249,6 +252,22 @@ #size-cells = <0>; }; }; + + sff2: sff2 { + /* lower */ + compatible = "sff,sff"; + i2c-bus = <&sff2_i2c>; + los-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; + }; + + sff3: sff3 { + /* upper */ + compatible = "sff,sff"; + i2c-bus = <&sff3_i2c>; + los-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; + }; }; &dspi0 { @@ -333,13 +352,6 @@ interrupts = <23 IRQ_TYPE_EDGE_FALLING>; gpio-controller; interrupt-controller; - - enet_swr_en { - gpio-hog; - gpios = <0 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "enet-swr-en"; - }; }; /* @@ -382,26 +394,16 @@ reg = <0>; }; - i2c@1 { + sff2_i2c: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; - - sfp2: at24c04@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - }; }; - i2c@2 { + sff3_i2c: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; - - sfp3: at24c04@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - }; }; i2c@3 { |