summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/sun6i-a31-m9.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/sun6i-a31-m9.dts')
-rw-r--r--arch/arm/boot/dts/sun6i-a31-m9.dts31
1 files changed, 20 insertions, 11 deletions
diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts
index 3ab544f3af4a..139a21e6b695 100644
--- a/arch/arm/boot/dts/sun6i-a31-m9.dts
+++ b/arch/arm/boot/dts/sun6i-a31-m9.dts
@@ -46,8 +46,11 @@
*/
/dts-v1/;
-/include/ "sun6i-a31.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Mele M9 / A1000G Quad top set box";
@@ -63,7 +66,7 @@
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 22 0>; /* PH22 */
+ cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
cd-inverted;
status = "okay";
};
@@ -85,22 +88,22 @@
led_pins_m9: led_pins@0 {
allwinner,pins = "PH13";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_cd_pin_m9: mmc0_cd_pin@0 {
allwinner,pins = "PH22";
allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <1>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
usb1_vbus_pin_m9: usb1_vbus_pin@0 {
allwinner,pins = "PC27";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
@@ -121,6 +124,12 @@
reg = <1>;
};
};
+
+ ir@01f02000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ status = "okay";
+ };
};
leds {
@@ -130,14 +139,14 @@
blue {
label = "m9:blue:usr";
- gpios = <&pio 7 13 0>;
+ gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
};
};
reg_usb1_vbus: usb1-vbus {
pinctrl-names = "default";
pinctrl-0 = <&usb1_vbus_pin_m9>;
- gpio = <&pio 2 27 0>;
+ gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};