diff options
Diffstat (limited to 'arch/arm/boot/dts/sh73a0-kzm9g.dts')
| -rw-r--r-- | arch/arm/boot/dts/sh73a0-kzm9g.dts | 378 |
1 files changed, 376 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index 27c5f426d172..022ba505f573 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -1,6 +1,9 @@ /* * Device Tree Source for the KZM-A9-GT board * + * Copyright (C) 2012 Horms Solutions Ltd. + * + * Based on sh73a0-kzm9g.dts * Copyright (C) 2012 Renesas Solutions Corp. * * This file is licensed under the terms of the GNU General Public License @@ -10,17 +13,388 @@ /dts-v1/; #include "sh73a0.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "KZM-A9-GT"; compatible = "renesas,kzm9g", "renesas,sh73a0"; + aliases { + serial4 = &scifa4; + }; + + cpus { + cpu@0 { + cpu0-supply = <&vdd_dvfs>; + operating-points = < + /* kHz uV */ + 1196000 1315000 + 598000 1175000 + 398667 1065000 + >; + voltage-tolerance = <1>; /* 1% */ + }; + }; + chosen { - bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200 rw"; + bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw"; + stdout-path = &scifa4; }; memory { device_type = "memory"; - reg = <0x41000000 0x1e800000>; + reg = <0x40000000 0x20000000>; + }; + + reg_1p8v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vmmc_sdhi0: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pfc 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vmmc_sdhi2: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "SDHI2 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pfc 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + leds { + compatible = "gpio-leds"; + led1 { + gpios = <&pfc 20 GPIO_ACTIVE_LOW>; + label = "LED1"; + }; + led2 { + gpios = <&pfc 21 GPIO_ACTIVE_LOW>; + label = "LED2"; + }; + led3 { + gpios = <&pfc 22 GPIO_ACTIVE_LOW>; + label = "LED3"; + }; + led4 { + gpios = <&pfc 23 GPIO_ACTIVE_LOW>; + label = "LED4"; + }; + }; + + keyboard { + compatible = "gpio-keys"; + + back-key { + gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + label = "SW3"; + }; + + right-key { + gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RIGHT>; + label = "SW2-R"; + }; + + left-key { + gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>; + linux,code = <KEY_LEFT>; + label = "SW2-L"; + }; + + enter-key { + gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>; + linux,code = <KEY_ENTER>; + label = "SW2-P"; + }; + + up-key { + gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_UP>; + label = "SW2-U"; + }; + + down-key { + gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>; + linux,code = <KEY_DOWN>; + label = "SW2-D"; + }; + + home-key { + gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + label = "SW1"; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "left_j"; + simple-audio-card,cpu { + sound-dai = <&sh_fsi2 0>; + }; + simple-audio-card,codec { + sound-dai = <&ak4648>; + bitclock-master; + frame-master; + system-clock-frequency = <11289600>; + }; + }; +}; + +&bsc { + ethernet@10000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x10000000 0x100>; + phy-mode = "mii"; + interrupt-parent = <&irqpin0>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + reg-io-width = <4>; + smsc,irq-push-pull; + smsc,save-mac-address; + vddvario-supply = <®_1p8v>; + vdd33a-supply = <®_3p3v>; + }; +}; + +&cmt1 { + status = "okay"; +}; + +&extal2_clk { + clock-frequency = <48000000>; +}; + +&i2c0 { + status = "okay"; + + compass@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + interrupt-parent = <&irqpin3>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + }; + + ak4648: codec@12 { + compatible = "asahi-kasei,ak4648"; + reg = <0x12>; + #sound-dai-cells = <0>; + }; + + accelerometer@1d { + compatible = "adi,adxl34x"; + reg = <0x1d>; + interrupt-parent = <&irqpin3>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>, + <3 IRQ_TYPE_LEVEL_HIGH>; }; + + rtc@32 { + compatible = "ricoh,r2025sd"; + reg = <0x32>; + }; + + as3711@40 { + compatible = "ams,as3711"; + reg = <0x40>; + + regulators { + vdd_dvfs: sd1 { + regulator-name = "1.315V CPU"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + sd2 { + regulator-name = "1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + sd4 { + regulator-name = "1.215V"; + regulator-min-microvolt = <1215000>; + regulator-max-microvolt = <1235000>; + regulator-always-on; + regulator-boot-on; + }; + ldo2 { + regulator-name = "2.8V CPU"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + ldo3 { + regulator-name = "3.0V CPU"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + ldo4 { + regulator-name = "2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + ldo5 { + regulator-name = "2.8V #2"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + ldo7 { + regulator-name = "1.15V CPU"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-boot-on; + }; + ldo8 { + regulator-name = "1.15V CPU #2"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + + touchscreen@55 { + compatible = "sitronix,st1232"; + reg = <0x55>; + interrupt-parent = <&irqpin1>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + status = "okay"; + + pcf8575: gpio@20 { + compatible = "nxp,pcf8575"; + reg = <0x20>; + interrupt-parent = <&irqpin2>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&mmcif { + pinctrl-0 = <&mmcif_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + vmmc-supply = <®_1p8v>; + status = "okay"; +}; + +&pfc { + i2c3_pins: i2c3 { + renesas,groups = "i2c3_1"; + renesas,function = "i2c3"; + }; + + mmcif_pins: mmc { + mux { + renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0"; + renesas,function = "mmc0"; + }; + cfg { + renesas,groups = "mmc0_data8_0"; + renesas,pins = "PORT279"; + bias-pull-up; + }; + }; + + scifa4_pins: serial4 { + renesas,groups = "scifa4_data", "scifa4_ctrl"; + renesas,function = "scifa4"; + }; + + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp"; + renesas,function = "sdhi0"; + }; + + sdhi2_pins: sd2 { + renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; + renesas,function = "sdhi2"; + }; + + fsia_pins: sounda { + renesas,groups = "fsia_mclk_in", "fsia_sclk_in", + "fsia_data_in", "fsia_data_out"; + renesas,function = "fsia"; + }; +}; + +&scifa4 { + pinctrl-0 = <&scifa4_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vmmc_sdhi0>; + bus-width = <4>; + status = "okay"; +}; + +&sdhi2 { + pinctrl-0 = <&sdhi2_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vmmc_sdhi2>; + bus-width = <4>; + broken-cd; + status = "okay"; +}; + +&sh_fsi2 { + pinctrl-0 = <&fsia_pins>; + pinctrl-names = "default"; + + status = "okay"; }; |