diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom-apq8060-dragonboard.dts')
| -rw-r--r-- | arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 21 |
1 files changed, 8 insertions, 13 deletions
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index 497bb065eb9d..4e6c50d45cb2 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -93,9 +93,8 @@ vdd-supply = <&pm8058_l14>; // 2.85V aset-gpios = <&pm8058_gpio 35 GPIO_ACTIVE_LOW>; capella,aset-resistance-ohms = <100000>; - /* GPIO34 has interrupt 225 on the PM8058 */ /* Trig on both edges - getting close or far away */ - interrupts-extended = <&pm8058 225 IRQ_TYPE_EDGE_BOTH>; + interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>; /* MPP05 analog input to the XOADC */ io-channels = <&xoadc 0x00 0x05>; io-channel-names = "aout"; @@ -515,9 +514,8 @@ ak8975@c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; - /* FIXME: GPIO33 has interrupt 224 on the PM8058 */ - interrupt-parent = <&pm8058>; - interrupts = <224 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&pm8058_gpio>; + interrupts = <33 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&dragon_ak8975_gpios>; vid-supply = <&pm8058_lvs0>; // 1.8V @@ -526,9 +524,8 @@ bmp085@77 { compatible = "bosch,bmp085"; reg = <0x77>; - /* FIXME: GPIO16 has interrupt 207 on the PM8058 */ - interrupt-parent = <&pm8058>; - interrupts = <207 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&pm8058_gpio>; + interrupts = <16 IRQ_TYPE_EDGE_RISING>; reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&dragon_bmp085_gpios>; @@ -539,12 +536,11 @@ compatible = "invensense,mpu3050"; reg = <0x68>; /* - * GPIO17 has interrupt 208 on the - * PM8058, it is pulled high by a 10k + * GPIO17 is pulled high by a 10k * resistor to VLOGIC so needs to be * active low/falling edge. */ - interrupts-extended = <&pm8058 208 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&pm8058_gpio 17 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&dragon_mpu3050_gpios>; vlogic-supply = <&pm8058_lvs0>; // 1.8V @@ -589,11 +585,10 @@ compatible = "smsc,lan9221", "smsc,lan9115"; reg = <2 0x0 0x100>; /* - * GPIO7 has interrupt 198 on the PM8058 * The second interrupt is the PME interrupt * for network wakeup, connected to the TLMM. */ - interrupts-extended = <&pm8058 198 IRQ_TYPE_EDGE_FALLING>, + interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>, <&tlmm 29 IRQ_TYPE_EDGE_RISING>; reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; vdd33a-supply = <&dragon_veth>; |