diff options
Diffstat (limited to 'arch/arm/boot/dts/omap3-n900.dts')
| -rw-r--r-- | arch/arm/boot/dts/omap3-n900.dts | 77 |
1 files changed, 73 insertions, 4 deletions
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index d1c3d99dc947..1a57b61f5e24 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -79,6 +79,17 @@ nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>; usb-phy = <&usb2_phy>; }; + + tv: connector { + compatible = "composite-connector"; + label = "tv"; + + port { + tv_connector_in: endpoint { + remote-endpoint = <&venc_out>; + }; + }; + }; }; &omap3_pmx_core { @@ -145,11 +156,23 @@ >; }; - display_pins: pinmux_display_pins { + acx565akm_pins: pinmux_acx565akm_pins { pinctrl-single,pins = < 0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */ >; }; + + dss_sdi_pins: pinmux_dss_sdi_pins { + pinctrl-single,pins = < + 0x0c0 (PIN_OUTPUT | MUX_MODE1) /* dss_data10.sdi_dat1n */ + 0x0c2 (PIN_OUTPUT | MUX_MODE1) /* dss_data11.sdi_dat1p */ + 0x0c4 (PIN_OUTPUT | MUX_MODE1) /* dss_data12.sdi_dat2n */ + 0x0c6 (PIN_OUTPUT | MUX_MODE1) /* dss_data13.sdi_dat2p */ + + 0x0d8 (PIN_OUTPUT | MUX_MODE1) /* dss_data22.sdi_clkp */ + 0x0da (PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */ + >; + }; }; &i2c1 { @@ -561,13 +584,23 @@ spi-max-frequency = <6000000>; reg = <0>; }; - mipid@2 { - compatible = "acx565akm"; + + acx565akm@2 { + compatible = "sony,acx565akm"; spi-max-frequency = <6000000>; reg = <2>; pinctrl-names = "default"; - pinctrl-0 = <&display_pins>; + pinctrl-0 = <&acx565akm_pins>; + + label = "lcd"; + reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */ + + port { + lcd_in: endpoint { + remote-endpoint = <&sdi_out>; + }; + }; }; }; @@ -593,3 +626,39 @@ pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_sdi_pins>; + + vdds_sdi-supply = <&vaux1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + sdi_out: endpoint { + remote-endpoint = <&lcd_in>; + datapairs = <2>; + }; + }; + }; +}; + +&venc { + status = "ok"; + + vdda-supply = <&vdac>; + + port { + venc_out: endpoint { + remote-endpoint = <&tv_connector_in>; + ti,channels = <1>; + }; + }; +}; |