diff options
Diffstat (limited to 'arch/arm/boot/dts/omap3-gta04.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/omap3-gta04.dtsi | 72 |
1 files changed, 66 insertions, 6 deletions
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index ab9fb8f49ff3..c09a0574af90 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -100,12 +100,28 @@ }; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm11 0 2000000 0>; + pwm-names = "backlight"; + brightness-levels = <0 11 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <9>; /* => 90 */ + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + }; + + pwm11: dmtimer-pwm { + compatible = "ti,omap-dmtimer-pwm"; + ti,timers = <&timer11>; + #pwm-cells = <3>; + }; + hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; }; - tv0: connector@1 { + tv0: connector { compatible = "svideo-connector"; label = "tv"; @@ -126,19 +142,24 @@ port@0 { reg = <0>; - opa_in: endpoint@0 { + opa_in: endpoint { remote-endpoint = <&venc_out>; }; }; port@1 { reg = <1>; - opa_out: endpoint@0 { + opa_out: endpoint { remote-endpoint = <&tv_connector_in>; }; }; }; }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>; /* W2CBW003 reset through tca6507 */ + }; }; &omap3_pmx_core { @@ -190,6 +211,12 @@ >; }; + backlight_pins: backlight_pins_pimnux { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3) /* gpt11/gpio57 */ + >; + }; + dss_dpi_pins: pinmux_dss_dpi_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ @@ -228,6 +255,24 @@ OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */ >; }; + + bma180_pins: pinmux_bma180_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */ + >; + }; + + itg3200_pins: pinmux_itg3200_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio56 */ + >; + }; + + hmc5843_pins: pinmux_hmc5843_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */ + >; + }; }; &omap3_pmx_core2 { @@ -298,6 +343,8 @@ bma180@41 { compatible = "bosch,bma180"; reg = <0x41>; + pinctrl-names = "default"; + pintcrl-0 = <&bma180_pins>; interrupt-parent = <&gpio4>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */ }; @@ -306,12 +353,14 @@ itg3200@68 { compatible = "invensense,itg3200"; reg = <0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&itg3200_pins>; interrupt-parent = <&gpio2>; - interrupts = <24 0>; /* GPIO_56 */ + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; /* GPIO_56 */ }; - /* leds */ - tca6507@45 { + /* leds + gpios */ + tca6507: tca6507@45 { compatible = "ti,tca6507"; #address-cells = <1>; #size-cells = <0>; @@ -351,6 +400,10 @@ hmc5843@1e { compatible = "honeywell,hmc5883l"; reg = <0x1e>; + pinctrl-names = "default"; + pinctrl-0 = <&hmc5843_pins>; + interrupt-parent = <&gpio4>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; /* gpio112 */ }; /* touchscreen */ @@ -362,6 +415,12 @@ gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; ti,x-plate-ohms = <600>; }; + + /* RFID EEPROM */ + m24lr64@50 { + compatible = "at,24c64"; + reg = <0x50>; + }; }; &i2c3 { @@ -398,6 +457,7 @@ bus-width = <4>; ti,non-removable; cap-power-off-card; + mmc-pwrseq = <&wifi_pwrseq>; }; &mmc3 { |