diff options
Diffstat (limited to 'arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi | 491 |
1 files changed, 491 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi new file mode 100644 index 000000000000..2731faede1cb --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi @@ -0,0 +1,491 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de> + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + chosen { + stdout-path = &uart2; + }; + + aliases { + can0 = &can1; + can1 = &can2; + mdio-gpio0 = &mdio; + nand = &gpmi; + rtc0 = &i2c_rtc; + rtc1 = &snvs; + usb0 = &usbh1; + usb1 = &usbotg; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, /* 24V */ + <&adc 1>; /* temperature */ + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + label = "D1"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_STATUS; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + label = "D2"; + gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-2 { + label = "D3"; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + mdio: mdio { + compatible = "microchip,mdio-smi0"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio>; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>, + <&gpio1 22 GPIO_ACTIVE_HIGH>; + + switch@0 { + compatible = "microchip,ksz8873"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_switch>; + interrupt-parent = <&gpio3>; + interrupt = <30 IRQ_TYPE_LEVEL_HIGH>; + reset-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + reg = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + ports@0 { + reg = <0>; + phy-mode = "internal"; + label = "lan1"; + }; + + ports@1 { + reg = <1>; + phy-mode = "internal"; + label = "lan2"; + }; + + ports@2 { + reg = <2>; + label = "cpu"; + ethernet = <&fec>; + phy-mode = "rmii"; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; + + }; + + clk50m_phy: phy-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + vin-supply = <®_5v0>; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_24v0: regulator-24v0 { + compatible = "regulator-fixed"; + regulator-name = "24v0"; + regulator-min-microvolt = <24000000>; + regulator-max-microvolt = <24000000>; + }; + + reg_can1_stby: regulator-can1-stby { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_stby>; + regulator-name = "can1-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 31 GPIO_ACTIVE_LOW>; + }; + + reg_can2_stby: regulator-can2-stby { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2_stby>; + regulator-name = "can2-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 11 GPIO_ACTIVE_LOW>; + }; + + reg_tft_vcom: regulator-tft-vcom { + compatible = "pwm-regulator"; + pwms = <&pwm3 0 20000 0>; + regulator-name = "tft_vcom"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + voltage-table = <3600000 26>; + }; + + reg_vcc_mmc: regulator-vcc-mmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vcc_mmc>; + vin-supply = <®_3v3>; + regulator-name = "mmc_vcc_supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100>; + }; + + reg_vcc_mmc_io: regulator-vcc-mmc-io { + compatible = "regulator-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vcc_mmc_io>; + vin-supply = <®_5v0>; + regulator-name = "mmc_io_supply"; + regulator-type = "voltage"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + states = <1800000 0x1>, <3300000 0x0>; + startup-delay-us = <100>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_can1_stby>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; + xceiver-supply = <®_can2_stby>; + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <54000000>; + reg = <0>; + }; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; + status = "okay"; + + adc: adc@0 { + compatible = "microchip,mcp3002"; + reg = <0>; + vref-supply = <®_3v3>; + spi-max-frequency = <1000000>; + #io-channel-cells = <1>; + }; +}; + +&clks { + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clk50m_phy>; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + phy-supply = <®_3v3>; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <400000>; + status = "okay"; + + i2c_rtc: rtc@51 { + compatible = "nxp,pcf85063"; + reg = <0x51>; + quartz-load-femtofarads = <12500>; + }; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + #pwm-cells = <2>; + status = "okay"; +}; + +&pwm3 { + /* used for LCD contrast control */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_5v0>; + disable-over-current; + status = "okay"; +}; + +/* no usbh2 */ +&usbphynop1 { + status = "disabled"; +}; + +/* no usbh3 */ +&usbphynop2 { + status = "disabled"; +}; + +&usbotg { + vbus-supply = <®_5v0>; + disable-over-current; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + cap-power-off-card; + full-pwr-cycle; + bus-width = <4>; + max-frequency = <50000000>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-ddr50; + mmc-ddr-1_8v; + vmmc-supply = <®_vcc_mmc>; + vqmmc-supply = <®_vcc_mmc_io>; + status = "okay"; +}; + +&iomuxc { + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x3008 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b000 + >; + }; + + pinctrl_can1_stby: can1stbygrp { + fsl,pins = < + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x13008 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000 + >; + }; + + pinctrl_can2_stby: can2stbygrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x13008 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0xb1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0xb1 + /* *no* external pull up */ + MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x58 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0xb1 + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0xb1 + /* external pull up */ + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x58 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + /* RMII 50 MHz */ + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x100f5 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x100f5 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x100c0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x100c0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x100f5 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x100f5 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x58 + /* GPIO for "link active" */ + MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x3038 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + /* external 10 k pull up */ + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x40010878 + /* external 10 k pull up */ + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x40010878 + >; + }; + + pinctrl_mdio: mdiogrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__GPIO1_IO22 0x100b1 + MX6QDL_PAD_ENET_MDC__GPIO1_IO31 0xb1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x58 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x58 + >; + }; + + pinctrl_switch: switchgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0xb0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + /* SoC internal pull up required */ + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + /* SoC internal pull up required */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b040 + /* SoC internal pull up required */ + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b040 + >; + }; + + pinctrl_vcc_mmc: vccmmcgrp { + fsl,pins = < + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x58 + >; + }; + + pinctrl_vcc_mmc_io: vccmmciogrp { + fsl,pins = < + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x58 + >; + }; +}; |